summaryrefslogtreecommitdiff
path: root/drivers/usb/serial/cypress_m8.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/serial/cypress_m8.c')
-rw-r--r--drivers/usb/serial/cypress_m8.c84
1 files changed, 41 insertions, 43 deletions
diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c
index a591ebec0f89..e23c77925e7a 100644
--- a/drivers/usb/serial/cypress_m8.c
+++ b/drivers/usb/serial/cypress_m8.c
@@ -66,17 +66,15 @@
#include <linux/serial.h>
#include <linux/delay.h>
#include <linux/uaccess.h>
+#include <asm/unaligned.h>
#include "cypress_m8.h"
-#ifdef CONFIG_USB_SERIAL_DEBUG
- static int debug = 1;
-#else
- static int debug;
-#endif
+static int debug;
static int stats;
static int interval;
+static int unstable_bauds;
/*
* Version Information
@@ -89,24 +87,24 @@ static int interval;
#define CYPRESS_BUF_SIZE 1024
#define CYPRESS_CLOSING_WAIT (30*HZ)
-static struct usb_device_id id_table_earthmate [] = {
+static const struct usb_device_id id_table_earthmate[] = {
{ USB_DEVICE(VENDOR_ID_DELORME, PRODUCT_ID_EARTHMATEUSB) },
{ USB_DEVICE(VENDOR_ID_DELORME, PRODUCT_ID_EARTHMATEUSB_LT20) },
{ } /* Terminating entry */
};
-static struct usb_device_id id_table_cyphidcomrs232 [] = {
+static const struct usb_device_id id_table_cyphidcomrs232[] = {
{ USB_DEVICE(VENDOR_ID_CYPRESS, PRODUCT_ID_CYPHIDCOM) },
{ USB_DEVICE(VENDOR_ID_POWERCOM, PRODUCT_ID_UPS) },
{ } /* Terminating entry */
};
-static struct usb_device_id id_table_nokiaca42v2 [] = {
+static const struct usb_device_id id_table_nokiaca42v2[] = {
{ USB_DEVICE(VENDOR_ID_DAZZLE, PRODUCT_ID_CA42) },
{ } /* Terminating entry */
};
-static struct usb_device_id id_table_combined [] = {
+static const struct usb_device_id id_table_combined[] = {
{ USB_DEVICE(VENDOR_ID_DELORME, PRODUCT_ID_EARTHMATEUSB) },
{ USB_DEVICE(VENDOR_ID_DELORME, PRODUCT_ID_EARTHMATEUSB_LT20) },
{ USB_DEVICE(VENDOR_ID_CYPRESS, PRODUCT_ID_CYPHIDCOM) },
@@ -154,7 +152,7 @@ struct cypress_private {
int isthrottled; /* if throttled, discard reads */
wait_queue_head_t delta_msr_wait; /* used for TIOCMIWAIT */
char prev_status, diff_status; /* used for TIOCMIWAIT */
- /* we pass a pointer to this as the arguement sent to
+ /* we pass a pointer to this as the argument sent to
cypress_set_termios old_termios */
struct ktermios tmp_termios; /* stores the old termios settings */
};
@@ -295,6 +293,9 @@ static int analyze_baud_rate(struct usb_serial_port *port, speed_t new_rate)
struct cypress_private *priv;
priv = usb_get_serial_port_data(port);
+ if (unstable_bauds)
+ return new_rate;
+
/*
* The general purpose firmware for the Cypress M8 allows for
* a maximum speed of 57600bps (I have no idea whether DeLorme
@@ -344,7 +345,8 @@ static int cypress_serial_control(struct tty_struct *tty,
{
int new_baudrate = 0, retval = 0, tries = 0;
struct cypress_private *priv;
- __u8 feature_buffer[5];
+ u8 *feature_buffer;
+ const unsigned int feature_len = 5;
unsigned long flags;
dbg("%s", __func__);
@@ -354,17 +356,18 @@ static int cypress_serial_control(struct tty_struct *tty,
if (!priv->comm_is_ok)
return -ENODEV;
+ feature_buffer = kcalloc(feature_len, sizeof(u8), GFP_KERNEL);
+ if (!feature_buffer)
+ return -ENOMEM;
+
switch (cypress_request_type) {
case CYPRESS_SET_CONFIG:
- new_baudrate = priv->baud_rate;
/* 0 means 'Hang up' so doesn't change the true bit rate */
- if (baud_rate == 0)
- new_baudrate = priv->baud_rate;
- /* Change of speed ? */
- else if (baud_rate != priv->baud_rate) {
+ new_baudrate = priv->baud_rate;
+ if (baud_rate && baud_rate != priv->baud_rate) {
dbg("%s - baud rate is changing", __func__);
retval = analyze_baud_rate(port, baud_rate);
- if (retval >= 0) {
+ if (retval >= 0) {
new_baudrate = retval;
dbg("%s - New baud rate set to %d",
__func__, new_baudrate);
@@ -373,9 +376,8 @@ static int cypress_serial_control(struct tty_struct *tty,
dbg("%s - baud rate is being sent as %d",
__func__, new_baudrate);
- memset(feature_buffer, 0, sizeof(feature_buffer));
/* fill the feature_buffer with new configuration */
- *((u_int32_t *)feature_buffer) = new_baudrate;
+ put_unaligned_le32(new_baudrate, feature_buffer);
feature_buffer[4] |= data_bits; /* assign data bits in 2 bit space ( max 3 ) */
/* 1 bit gap */
feature_buffer[4] |= (stop_bits << 3); /* assign stop bits in 1 bit space */
@@ -397,15 +399,15 @@ static int cypress_serial_control(struct tty_struct *tty,
HID_REQ_SET_REPORT,
USB_DIR_OUT | USB_RECIP_INTERFACE | USB_TYPE_CLASS,
0x0300, 0, feature_buffer,
- sizeof(feature_buffer), 500);
+ feature_len, 500);
if (tries++ >= 3)
break;
- } while (retval != sizeof(feature_buffer) &&
+ } while (retval != feature_len &&
retval != -ENODEV);
- if (retval != sizeof(feature_buffer)) {
+ if (retval != feature_len) {
dev_err(&port->dev, "%s - failed sending serial "
"line settings - %d\n", __func__, retval);
cypress_set_dead(port);
@@ -425,43 +427,42 @@ static int cypress_serial_control(struct tty_struct *tty,
/* Not implemented for this device,
and if we try to do it we're likely
to crash the hardware. */
- return -ENOTTY;
+ retval = -ENOTTY;
+ goto out;
}
dbg("%s - retreiving serial line settings", __func__);
- /* set initial values in feature buffer */
- memset(feature_buffer, 0, sizeof(feature_buffer));
-
do {
retval = usb_control_msg(port->serial->dev,
usb_rcvctrlpipe(port->serial->dev, 0),
HID_REQ_GET_REPORT,
USB_DIR_IN | USB_RECIP_INTERFACE | USB_TYPE_CLASS,
0x0300, 0, feature_buffer,
- sizeof(feature_buffer), 500);
+ feature_len, 500);
if (tries++ >= 3)
break;
- } while (retval != sizeof(feature_buffer)
+ } while (retval != feature_len
&& retval != -ENODEV);
- if (retval != sizeof(feature_buffer)) {
+ if (retval != feature_len) {
dev_err(&port->dev, "%s - failed to retrieve serial "
"line settings - %d\n", __func__, retval);
cypress_set_dead(port);
- return retval;
+ goto out;
} else {
spin_lock_irqsave(&priv->lock, flags);
/* store the config in one byte, and later
use bit masks to check values */
priv->current_config = feature_buffer[4];
- priv->baud_rate = *((u_int32_t *)feature_buffer);
+ priv->baud_rate = get_unaligned_le32(feature_buffer);
spin_unlock_irqrestore(&priv->lock, flags);
}
}
spin_lock_irqsave(&priv->lock, flags);
++priv->cmd_count;
spin_unlock_irqrestore(&priv->lock, flags);
-
+out:
+ kfree(feature_buffer);
return retval;
} /* cypress_serial_control */
@@ -690,7 +691,6 @@ static void cypress_dtr_rts(struct usb_serial_port *port, int on)
{
struct cypress_private *priv = usb_get_serial_port_data(port);
/* drop dtr and rts */
- priv = usb_get_serial_port_data(port);
spin_lock_irq(&priv->lock);
if (on == 0)
priv->line_control = 0;
@@ -1307,13 +1307,9 @@ static void cypress_read_int_callback(struct urb *urb)
spin_unlock_irqrestore(&priv->lock, flags);
/* process read if there is data other than line status */
- if (tty && (bytes > i)) {
- bytes = tty_buffer_request_room(tty, bytes);
- for (; i < bytes ; ++i) {
- dbg("pushing byte number %d - %d - %c", i, data[i],
- data[i]);
- tty_insert_flip_char(tty, data[i], tty_flag);
- }
+ if (tty && bytes > i) {
+ tty_insert_flip_string_fixed_flag(tty, data + i,
+ bytes - i, tty_flag);
tty_flip_buffer_push(tty);
}
@@ -1325,9 +1321,9 @@ static void cypress_read_int_callback(struct urb *urb)
continue_read:
tty_kref_put(tty);
- /* Continue trying to always read... unless the port has closed. */
+ /* Continue trying to always read */
- if (port->port.count > 0 && priv->comm_is_ok) {
+ if (priv->comm_is_ok) {
usb_fill_int_urb(port->interrupt_in_urb, port->serial->dev,
usb_rcvintpipe(port->serial->dev,
port->interrupt_in_endpointAddress),
@@ -1336,7 +1332,7 @@ continue_read:
cypress_read_int_callback, port,
priv->read_urb_interval);
result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC);
- if (result) {
+ if (result && result != -EPERM) {
dev_err(&urb->dev->dev, "%s - failed resubmitting "
"read urb, error %d\n", __func__,
result);
@@ -1650,3 +1646,5 @@ module_param(stats, bool, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(stats, "Enable statistics or not");
module_param(interval, int, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(interval, "Overrides interrupt interval");
+module_param(unstable_bauds, bool, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(unstable_bauds, "Allow unstable baud rates");
generated by cgit v1.2.3 (git 2.0.4) at 2024-11-10 07:09:19 +0000