diff options
Diffstat (limited to 'drivers/usb/serial/io_ti.c')
-rw-r--r-- | drivers/usb/serial/io_ti.c | 109 |
1 files changed, 58 insertions, 51 deletions
diff --git a/drivers/usb/serial/io_ti.c b/drivers/usb/serial/io_ti.c index a58822a14a87..cb4c54316cf5 100644 --- a/drivers/usb/serial/io_ti.c +++ b/drivers/usb/serial/io_ti.c @@ -243,9 +243,9 @@ static void edge_tty_recv(struct device *dev, struct tty_struct *tty, static void stop_read(struct edgeport_port *edge_port); static int restart_read(struct edgeport_port *edge_port); -static void edge_set_termios(struct usb_serial_port *port, - struct ktermios *old_termios); -static void edge_send(struct usb_serial_port *port); +static void edge_set_termios(struct tty_struct *tty, + struct usb_serial_port *port, struct ktermios *old_termios); +static void edge_send(struct tty_struct *tty); /* sysfs attributes */ static int edge_create_sysfs_attrs(struct usb_serial_port *port); @@ -572,7 +572,7 @@ static void chase_port(struct edgeport_port *port, unsigned long timeout, int flush) { int baud_rate; - struct tty_struct *tty = port->port->tty; + struct tty_struct *tty = port->port->port.tty; wait_queue_t wait; unsigned long flags; @@ -1554,7 +1554,7 @@ static void handle_new_msr(struct edgeport_port *edge_port, __u8 msr) /* Save the new modem status */ edge_port->shadow_msr = msr & 0xf0; - tty = edge_port->port->tty; + tty = edge_port->port->port.tty; /* handle CTS flow control */ if (tty && C_CRTSCTS(tty)) { if (msr & EDGEPORT_MSR_CTS) { @@ -1587,9 +1587,8 @@ static void handle_new_lsr(struct edgeport_port *edge_port, int lsr_data, new_lsr &= (__u8)(LSR_OVER_ERR | LSR_BREAK); /* Place LSR data byte into Rx buffer */ - if (lsr_data && edge_port->port->tty) - edge_tty_recv(&edge_port->port->dev, edge_port->port->tty, - &data, 1); + if (lsr_data && edge_port->port->port.tty) + edge_tty_recv(&edge_port->port->dev, edge_port->port->port.tty, &data, 1); /* update input line counters */ icount = &edge_port->icount; @@ -1750,7 +1749,7 @@ static void edge_bulk_in_callback(struct urb *urb) ++data; } - tty = edge_port->port->tty; + tty = edge_port->port->port.tty; if (tty && urb->actual_length) { usb_serial_debug_data(debug, &edge_port->port->dev, __func__, urb->actual_length, data); @@ -1819,10 +1818,11 @@ static void edge_bulk_out_callback(struct urb *urb) } /* send any buffered data */ - edge_send(port); + edge_send(port->port.tty); } -static int edge_open(struct usb_serial_port *port, struct file *filp) +static int edge_open(struct tty_struct *tty, + struct usb_serial_port *port, struct file *filp) { struct edgeport_port *edge_port = usb_get_serial_port_data(port); struct edgeport_serial *edge_serial; @@ -1838,7 +1838,8 @@ static int edge_open(struct usb_serial_port *port, struct file *filp) if (edge_port == NULL) return -ENODEV; - port->tty->low_latency = low_latency; + if (tty) + tty->low_latency = low_latency; port_number = port->number - port->serial->minor; switch (port_number) { @@ -1874,7 +1875,8 @@ static int edge_open(struct usb_serial_port *port, struct file *filp) } /* set up the port settings */ - edge_set_termios(port, port->tty->termios); + if (tty) + edge_set_termios(tty, port, port->port.tty->termios); /* open up the port */ @@ -2000,7 +2002,8 @@ release_es_lock: return status; } -static void edge_close(struct usb_serial_port *port, struct file *filp) +static void edge_close(struct tty_struct *tty, + struct usb_serial_port *port, struct file *filp) { struct edgeport_serial *edge_serial; struct edgeport_port *edge_port; @@ -2048,8 +2051,8 @@ static void edge_close(struct usb_serial_port *port, struct file *filp) dbg("%s - exited", __func__); } -static int edge_write(struct usb_serial_port *port, const unsigned char *data, - int count) +static int edge_write(struct tty_struct *tty, struct usb_serial_port *port, + const unsigned char *data, int count) { struct edgeport_port *edge_port = usb_get_serial_port_data(port); unsigned long flags; @@ -2070,16 +2073,16 @@ static int edge_write(struct usb_serial_port *port, const unsigned char *data, count = edge_buf_put(edge_port->ep_out_buf, data, count); spin_unlock_irqrestore(&edge_port->ep_lock, flags); - edge_send(port); + edge_send(tty); return count; } -static void edge_send(struct usb_serial_port *port) +static void edge_send(struct tty_struct *tty) { + struct usb_serial_port *port = tty->driver_data; int count, result; struct edgeport_port *edge_port = usb_get_serial_port_data(port); - struct tty_struct *tty = port->tty; unsigned long flags; @@ -2133,8 +2136,9 @@ static void edge_send(struct usb_serial_port *port) tty_wakeup(tty); } -static int edge_write_room(struct usb_serial_port *port) +static int edge_write_room(struct tty_struct *tty) { + struct usb_serial_port *port = tty->driver_data; struct edgeport_port *edge_port = usb_get_serial_port_data(port); int room = 0; unsigned long flags; @@ -2154,8 +2158,9 @@ static int edge_write_room(struct usb_serial_port *port) return room; } -static int edge_chars_in_buffer(struct usb_serial_port *port) +static int edge_chars_in_buffer(struct tty_struct *tty) { + struct usb_serial_port *port = tty->driver_data; struct edgeport_port *edge_port = usb_get_serial_port_data(port); int chars = 0; unsigned long flags; @@ -2175,10 +2180,10 @@ static int edge_chars_in_buffer(struct usb_serial_port *port) return chars; } -static void edge_throttle(struct usb_serial_port *port) +static void edge_throttle(struct tty_struct *tty) { + struct usb_serial_port *port = tty->driver_data; struct edgeport_port *edge_port = usb_get_serial_port_data(port); - struct tty_struct *tty = port->tty; int status; dbg("%s - port %d", __func__, port->number); @@ -2189,11 +2194,10 @@ static void edge_throttle(struct usb_serial_port *port) /* if we are implementing XON/XOFF, send the stop character */ if (I_IXOFF(tty)) { unsigned char stop_char = STOP_CHAR(tty); - status = edge_write(port, &stop_char, 1); - if (status <= 0) - dev_err(&port->dev, - "%s - failed to write stop character, %d\n", - __func__, status); + status = edge_write(tty, port, &stop_char, 1); + if (status <= 0) { + dev_err(&port->dev, "%s - failed to write stop character, %d\n", __func__, status); + } } /* if we are implementing RTS/CTS, stop reads */ @@ -2203,10 +2207,10 @@ static void edge_throttle(struct usb_serial_port *port) } -static void edge_unthrottle(struct usb_serial_port *port) +static void edge_unthrottle(struct tty_struct *tty) { + struct usb_serial_port *port = tty->driver_data; struct edgeport_port *edge_port = usb_get_serial_port_data(port); - struct tty_struct *tty = port->tty; int status; dbg("%s - port %d", __func__, port->number); @@ -2217,11 +2221,10 @@ static void edge_unthrottle(struct usb_serial_port *port) /* if we are implementing XON/XOFF, send the start character */ if (I_IXOFF(tty)) { unsigned char start_char = START_CHAR(tty); - status = edge_write(port, &start_char, 1); - if (status <= 0) - dev_err(&port->dev, - "%s - failed to write start character, %d\n", - __func__, status); + status = edge_write(tty, port, &start_char, 1); + if (status <= 0) { + dev_err(&port->dev, "%s - failed to write start character, %d\n", __func__, status); + } } /* if we are implementing RTS/CTS, restart reads */ /* are the Edgeport will assert the RTS line */ @@ -2271,11 +2274,10 @@ static int restart_read(struct edgeport_port *edge_port) return status; } -static void change_port_settings(struct edgeport_port *edge_port, - struct ktermios *old_termios) +static void change_port_settings(struct tty_struct *tty, + struct edgeport_port *edge_port, struct ktermios *old_termios) { struct ump_uart_config *config; - struct tty_struct *tty; int baud; unsigned cflag; int status; @@ -2284,9 +2286,7 @@ static void change_port_settings(struct edgeport_port *edge_port, dbg("%s - port %d", __func__, edge_port->port->number); - tty = edge_port->port->tty; - - config = kmalloc(sizeof(*config), GFP_KERNEL); + config = kmalloc (sizeof (*config), GFP_KERNEL); if (!config) { *tty->termios = *old_termios; dev_err(&edge_port->port->dev, "%s - out of memory\n", @@ -2419,11 +2419,13 @@ static void change_port_settings(struct edgeport_port *edge_port, return; } -static void edge_set_termios(struct usb_serial_port *port, - struct ktermios *old_termios) +static void edge_set_termios(struct tty_struct *tty, + struct usb_serial_port *port, struct ktermios *old_termios) { struct edgeport_port *edge_port = usb_get_serial_port_data(port); - struct tty_struct *tty = port->tty; + unsigned int cflag; + + cflag = tty->termios->c_cflag; dbg("%s - clfag %08x iflag %08x", __func__, tty->termios->c_cflag, tty->termios->c_iflag); @@ -2434,12 +2436,14 @@ static void edge_set_termios(struct usb_serial_port *port, if (edge_port == NULL) return; /* change the port settings to the new ones specified */ - change_port_settings(edge_port, old_termios); + change_port_settings(tty, edge_port, old_termios); + return; } -static int edge_tiocmset(struct usb_serial_port *port, struct file *file, +static int edge_tiocmset(struct tty_struct *tty, struct file *file, unsigned int set, unsigned int clear) { + struct usb_serial_port *port = tty->driver_data; struct edgeport_port *edge_port = usb_get_serial_port_data(port); unsigned int mcr; unsigned long flags; @@ -2469,8 +2473,9 @@ static int edge_tiocmset(struct usb_serial_port *port, struct file *file, return 0; } -static int edge_tiocmget(struct usb_serial_port *port, struct file *file) +static int edge_tiocmget(struct tty_struct *tty, struct file *file) { + struct usb_serial_port *port = tty->driver_data; struct edgeport_port *edge_port = usb_get_serial_port_data(port); unsigned int result = 0; unsigned int msr; @@ -2522,9 +2527,10 @@ static int get_serial_info(struct edgeport_port *edge_port, return 0; } -static int edge_ioctl(struct usb_serial_port *port, struct file *file, +static int edge_ioctl(struct tty_struct *tty, struct file *file, unsigned int cmd, unsigned long arg) { + struct usb_serial_port *port = tty->driver_data; struct edgeport_port *edge_port = usb_get_serial_port_data(port); struct async_icount cnow; struct async_icount cprev; @@ -2569,18 +2575,19 @@ static int edge_ioctl(struct usb_serial_port *port, struct file *file, return -ENOIOCTLCMD; } -static void edge_break(struct usb_serial_port *port, int on) +static void edge_break(struct tty_struct *tty, int break_state) { + struct usb_serial_port *port = tty->driver_data; struct edgeport_port *edge_port = usb_get_serial_port_data(port); int status; int bv = 0; /* Off */ - dbg("%s - state = %d", __func__, on); + dbg("%s - state = %d", __func__, break_state); /* chase the port close */ chase_port(edge_port, 0, 0); - if (on == -1) + if (break_state == -1) bv = 1; /* On */ status = ti_do_config(edge_port, UMPC_SET_CLR_BREAK, bv); if (status) |