summaryrefslogtreecommitdiff
path: root/drivers/usb/serial
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/serial')
-rw-r--r--drivers/usb/serial/Kconfig19
-rw-r--r--drivers/usb/serial/Makefile2
-rw-r--r--drivers/usb/serial/aircable.c36
-rw-r--r--drivers/usb/serial/ark3116.c3
-rw-r--r--drivers/usb/serial/belkin_sa.c2
-rw-r--r--drivers/usb/serial/ch341.c27
-rw-r--r--drivers/usb/serial/cp210x.c7
-rw-r--r--drivers/usb/serial/cyberjack.c5
-rw-r--r--drivers/usb/serial/cypress_m8.c82
-rw-r--r--drivers/usb/serial/digi_acceleport.c38
-rw-r--r--drivers/usb/serial/empeg.c3
-rw-r--r--drivers/usb/serial/ftdi_sio.c195
-rw-r--r--drivers/usb/serial/ftdi_sio.h6
-rw-r--r--drivers/usb/serial/ftdi_sio_ids.h39
-rw-r--r--drivers/usb/serial/funsoft.c2
-rw-r--r--drivers/usb/serial/garmin_gps.c3
-rw-r--r--drivers/usb/serial/generic.c7
-rw-r--r--drivers/usb/serial/hp4x.c2
-rw-r--r--drivers/usb/serial/io_edgeport.c69
-rw-r--r--drivers/usb/serial/io_tables.h10
-rw-r--r--drivers/usb/serial/io_ti.c75
-rw-r--r--drivers/usb/serial/ipaq.c1
-rw-r--r--drivers/usb/serial/ipw.c3
-rw-r--r--drivers/usb/serial/ir-usb.c13
-rw-r--r--drivers/usb/serial/iuu_phoenix.c2
-rw-r--r--drivers/usb/serial/keyspan.c57
-rw-r--r--drivers/usb/serial/keyspan.h10
-rw-r--r--drivers/usb/serial/keyspan_pda.c53
-rw-r--r--drivers/usb/serial/kl5kusb105.c66
-rw-r--r--drivers/usb/serial/kobil_sct.c25
-rw-r--r--drivers/usb/serial/mct_u232.c57
-rw-r--r--drivers/usb/serial/mct_u232.h2
-rw-r--r--drivers/usb/serial/mos7720.c185
-rw-r--r--drivers/usb/serial/mos7840.c27
-rw-r--r--drivers/usb/serial/moto_modem.c2
-rw-r--r--drivers/usb/serial/navman.c3
-rw-r--r--drivers/usb/serial/omninet.c8
-rw-r--r--drivers/usb/serial/opticon.c17
-rw-r--r--drivers/usb/serial/option.c71
-rw-r--r--drivers/usb/serial/oti6858.c36
-rw-r--r--drivers/usb/serial/pl2303.c38
-rw-r--r--drivers/usb/serial/qcaux.c96
-rw-r--r--drivers/usb/serial/qcserial.c2
-rw-r--r--drivers/usb/serial/siemens_mpi.c2
-rw-r--r--drivers/usb/serial/sierra.c59
-rw-r--r--drivers/usb/serial/spcp8x5.c27
-rw-r--r--drivers/usb/serial/symbolserial.c12
-rw-r--r--drivers/usb/serial/ti_usb_3410_5052.c3
-rw-r--r--drivers/usb/serial/usb-serial.c15
-rw-r--r--drivers/usb/serial/usb_debug.c2
-rw-r--r--drivers/usb/serial/visor.c40
-rw-r--r--drivers/usb/serial/vivopay-serial.c76
-rw-r--r--drivers/usb/serial/whiteheat.c24
53 files changed, 1014 insertions, 652 deletions
diff --git a/drivers/usb/serial/Kconfig b/drivers/usb/serial/Kconfig
index c480ea4c19f2..c78b255e3f83 100644
--- a/drivers/usb/serial/Kconfig
+++ b/drivers/usb/serial/Kconfig
@@ -472,6 +472,17 @@ config USB_SERIAL_OTI6858
To compile this driver as a module, choose M here: the
module will be called oti6858.
+config USB_SERIAL_QCAUX
+ tristate "USB Qualcomm Auxiliary Serial Port Driver"
+ ---help---
+ Say Y here if you want to use the auxiliary serial ports provided
+ by many modems based on Qualcomm chipsets. These ports often use
+ a proprietary protocol called DM and cannot be used for AT- or
+ PPP-based communication.
+
+ To compile this driver as a module, choose M here: the
+ module will be called moto_modem. If unsure, choose N.
+
config USB_SERIAL_QUALCOMM
tristate "USB Qualcomm Serial modem"
help
@@ -600,6 +611,14 @@ config USB_SERIAL_OPTICON
To compile this driver as a module, choose M here: the
module will be called opticon.
+config USB_SERIAL_VIVOPAY_SERIAL
+ tristate "USB ViVOpay serial interface driver"
+ help
+ Say Y here if you want to use a ViVOtech ViVOpay USB device.
+
+ To compile this driver as a module, choose M here: the
+ module will be called vivopay-serial.
+
config USB_SERIAL_DEBUG
tristate "USB Debugging Device"
help
diff --git a/drivers/usb/serial/Makefile b/drivers/usb/serial/Makefile
index 66619beb6cc0..83c9e431a568 100644
--- a/drivers/usb/serial/Makefile
+++ b/drivers/usb/serial/Makefile
@@ -45,6 +45,7 @@ obj-$(CONFIG_USB_SERIAL_OPTICON) += opticon.o
obj-$(CONFIG_USB_SERIAL_OPTION) += option.o
obj-$(CONFIG_USB_SERIAL_OTI6858) += oti6858.o
obj-$(CONFIG_USB_SERIAL_PL2303) += pl2303.o
+obj-$(CONFIG_USB_SERIAL_QCAUX) += qcaux.o
obj-$(CONFIG_USB_SERIAL_QUALCOMM) += qcserial.o
obj-$(CONFIG_USB_SERIAL_SAFE) += safe_serial.o
obj-$(CONFIG_USB_SERIAL_SIEMENS_MPI) += siemens_mpi.o
@@ -55,4 +56,5 @@ obj-$(CONFIG_USB_SERIAL_TI) += ti_usb_3410_5052.o
obj-$(CONFIG_USB_SERIAL_VISOR) += visor.o
obj-$(CONFIG_USB_SERIAL_WHITEHEAT) += whiteheat.o
obj-$(CONFIG_USB_SERIAL_XIRCOM) += keyspan_pda.o
+obj-$(CONFIG_USB_SERIAL_VIVOPAY_SERIAL) += vivopay-serial.o
diff --git a/drivers/usb/serial/aircable.c b/drivers/usb/serial/aircable.c
index b10ac8409411..365db1097bfd 100644
--- a/drivers/usb/serial/aircable.c
+++ b/drivers/usb/serial/aircable.c
@@ -78,7 +78,7 @@ static int debug;
#define DRIVER_DESC "AIRcable USB Driver"
/* ID table that will be registered with USB core */
-static struct usb_device_id id_table [] = {
+static const struct usb_device_id id_table[] = {
{ USB_DEVICE(AIRCABLE_VID, AIRCABLE_USB_PID) },
{ },
};
@@ -468,10 +468,6 @@ static void aircable_read_bulk_callback(struct urb *urb)
if (status) {
dbg("%s - urb status = %d", __func__, status);
- if (!port->port.count) {
- dbg("%s - port is closed, exiting.", __func__);
- return;
- }
if (status == -EPROTO) {
dbg("%s - caught -EPROTO, resubmitting the urb",
__func__);
@@ -530,23 +526,19 @@ static void aircable_read_bulk_callback(struct urb *urb)
}
tty_kref_put(tty);
- /* Schedule the next read _if_ we are still open */
- if (port->port.count) {
- usb_fill_bulk_urb(port->read_urb, port->serial->dev,
- usb_rcvbulkpipe(port->serial->dev,
- port->bulk_in_endpointAddress),
- port->read_urb->transfer_buffer,
- port->read_urb->transfer_buffer_length,
- aircable_read_bulk_callback, port);
-
- result = usb_submit_urb(urb, GFP_ATOMIC);
- if (result)
- dev_err(&urb->dev->dev,
- "%s - failed resubmitting read urb, error %d\n",
- __func__, result);
- }
-
- return;
+ /* Schedule the next read */
+ usb_fill_bulk_urb(port->read_urb, port->serial->dev,
+ usb_rcvbulkpipe(port->serial->dev,
+ port->bulk_in_endpointAddress),
+ port->read_urb->transfer_buffer,
+ port->read_urb->transfer_buffer_length,
+ aircable_read_bulk_callback, port);
+
+ result = usb_submit_urb(urb, GFP_ATOMIC);
+ if (result && result != -EPERM)
+ dev_err(&urb->dev->dev,
+ "%s - failed resubmitting read urb, error %d\n",
+ __func__, result);
}
/* Based on ftdi_sio.c throttle */
diff --git a/drivers/usb/serial/ark3116.c b/drivers/usb/serial/ark3116.c
index a9c2dec8e3fb..547c9448c28c 100644
--- a/drivers/usb/serial/ark3116.c
+++ b/drivers/usb/serial/ark3116.c
@@ -50,7 +50,7 @@ static int debug;
/* usb timeout of 1 second */
#define ARK_TIMEOUT (1*HZ)
-static struct usb_device_id id_table [] = {
+static const struct usb_device_id id_table[] = {
{ USB_DEVICE(0x6547, 0x0232) },
{ USB_DEVICE(0x18ec, 0x3118) }, /* USB to IrDA adapter */
{ },
@@ -733,7 +733,6 @@ static void ark3116_read_bulk_callback(struct urb *urb)
tty = tty_port_tty_get(&port->port);
if (tty) {
- tty_buffer_request_room(tty, urb->actual_length + 1);
/* overrun is special, not associated with a char */
if (unlikely(lsr & UART_LSR_OE))
tty_insert_flip_char(tty, 0, TTY_OVERRUN);
diff --git a/drivers/usb/serial/belkin_sa.c b/drivers/usb/serial/belkin_sa.c
index a0467bc61627..1295e44e3f1c 100644
--- a/drivers/usb/serial/belkin_sa.c
+++ b/drivers/usb/serial/belkin_sa.c
@@ -103,7 +103,7 @@ static int belkin_sa_tiocmset(struct tty_struct *tty, struct file *file,
unsigned int set, unsigned int clear);
-static struct usb_device_id id_table_combined [] = {
+static const struct usb_device_id id_table_combined[] = {
{ USB_DEVICE(BELKIN_SA_VID, BELKIN_SA_PID) },
{ USB_DEVICE(BELKIN_OLD_VID, BELKIN_OLD_PID) },
{ USB_DEVICE(PERACOM_VID, PERACOM_PID) },
diff --git a/drivers/usb/serial/ch341.c b/drivers/usb/serial/ch341.c
index 59eff721fcc5..9f4fed1968b5 100644
--- a/drivers/usb/serial/ch341.c
+++ b/drivers/usb/serial/ch341.c
@@ -22,6 +22,7 @@
#include <linux/usb.h>
#include <linux/usb/serial.h>
#include <linux/serial.h>
+#include <asm/unaligned.h>
#define DEFAULT_BAUD_RATE 9600
#define DEFAULT_TIMEOUT 1000
@@ -70,7 +71,7 @@
static int debug;
-static struct usb_device_id id_table [] = {
+static const struct usb_device_id id_table[] = {
{ USB_DEVICE(0x4348, 0x5523) },
{ USB_DEVICE(0x1a86, 0x7523) },
{ },
@@ -392,16 +393,22 @@ static void ch341_break_ctl(struct tty_struct *tty, int break_state)
struct usb_serial_port *port = tty->driver_data;
int r;
uint16_t reg_contents;
- uint8_t break_reg[2];
+ uint8_t *break_reg;
dbg("%s()", __func__);
+ break_reg = kmalloc(2, GFP_KERNEL);
+ if (!break_reg) {
+ dev_err(&port->dev, "%s - kmalloc failed\n", __func__);
+ return;
+ }
+
r = ch341_control_in(port->serial->dev, CH341_REQ_READ_REG,
- ch341_break_reg, 0, break_reg, sizeof(break_reg));
+ ch341_break_reg, 0, break_reg, 2);
if (r < 0) {
- printk(KERN_WARNING "%s: USB control read error whilst getting"
- " break register contents.\n", __FILE__);
- return;
+ dev_err(&port->dev, "%s - USB control read error (%d)\n",
+ __func__, r);
+ goto out;
}
dbg("%s - initial ch341 break register contents - reg1: %x, reg2: %x",
__func__, break_reg[0], break_reg[1]);
@@ -416,12 +423,14 @@ static void ch341_break_ctl(struct tty_struct *tty, int break_state)
}
dbg("%s - New ch341 break register contents - reg1: %x, reg2: %x",
__func__, break_reg[0], break_reg[1]);
- reg_contents = (uint16_t)break_reg[0] | ((uint16_t)break_reg[1] << 8);
+ reg_contents = get_unaligned_le16(break_reg);
r = ch341_control_out(port->serial->dev, CH341_REQ_WRITE_REG,
ch341_break_reg, reg_contents);
if (r < 0)
- printk(KERN_WARNING "%s: USB control write error whilst setting"
- " break register contents.\n", __FILE__);
+ dev_err(&port->dev, "%s - USB control write error (%d)\n",
+ __func__, r);
+out:
+ kfree(break_reg);
}
static int ch341_tiocmset(struct tty_struct *tty, struct file *file,
diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c
index bd254ec97d14..507382b0a9ed 100644
--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -55,7 +55,7 @@ static int cp210x_carrier_raised(struct usb_serial_port *p);
static int debug;
-static struct usb_device_id id_table [] = {
+static const struct usb_device_id id_table[] = {
{ USB_DEVICE(0x0471, 0x066A) }, /* AKTAKOM ACE-1001 cable */
{ USB_DEVICE(0x0489, 0xE000) }, /* Pirelli Broadband S.p.A, DP-L10 SIP/GSM Mobile */
{ USB_DEVICE(0x0745, 0x1000) }, /* CipherLab USB CCD Barcode Scanner 1000 */
@@ -91,11 +91,12 @@ static struct usb_device_id id_table [] = {
{ USB_DEVICE(0x10C4, 0x81C8) }, /* Lipowsky Industrie Elektronik GmbH, Baby-JTAG */
{ USB_DEVICE(0x10C4, 0x81E2) }, /* Lipowsky Industrie Elektronik GmbH, Baby-LIN */
{ USB_DEVICE(0x10C4, 0x81E7) }, /* Aerocomm Radio */
+ { USB_DEVICE(0x10C4, 0x81E8) }, /* Zephyr Bioharness */
{ USB_DEVICE(0x10C4, 0x81F2) }, /* C1007 HF band RFID controller */
{ USB_DEVICE(0x10C4, 0x8218) }, /* Lipowsky Industrie Elektronik GmbH, HARP-1 */
{ USB_DEVICE(0x10C4, 0x822B) }, /* Modem EDGE(GSM) Comander 2 */
{ USB_DEVICE(0x10C4, 0x826B) }, /* Cygnal Integrated Products, Inc., Fasttrax GPS demostration module */
- { USB_DEVICE(0x10c4, 0x8293) }, /* Telegesys ETRX2USB */
+ { USB_DEVICE(0x10C4, 0x8293) }, /* Telegesys ETRX2USB */
{ USB_DEVICE(0x10C4, 0x82F9) }, /* Procyon AVS */
{ USB_DEVICE(0x10C4, 0x8341) }, /* Siemens MC35PU GPRS Modem */
{ USB_DEVICE(0x10C4, 0x8382) }, /* Cygnal Integrated Products, Inc. */
@@ -612,7 +613,7 @@ static void cp210x_set_termios(struct tty_struct *tty,
baud);
if (cp210x_set_config_single(port, CP210X_SET_BAUDDIV,
((BAUD_RATE_GEN_FREQ + baud/2) / baud))) {
- dbg("Baud rate requested not supported by device\n");
+ dbg("Baud rate requested not supported by device");
baud = tty_termios_baud_rate(old_termios);
}
}
diff --git a/drivers/usb/serial/cyberjack.c b/drivers/usb/serial/cyberjack.c
index b0f6402a91ca..f744ab7a3b19 100644
--- a/drivers/usb/serial/cyberjack.c
+++ b/drivers/usb/serial/cyberjack.c
@@ -70,7 +70,7 @@ static void cyberjack_read_int_callback(struct urb *urb);
static void cyberjack_read_bulk_callback(struct urb *urb);
static void cyberjack_write_bulk_callback(struct urb *urb);
-static struct usb_device_id id_table [] = {
+static const struct usb_device_id id_table[] = {
{ USB_DEVICE(CYBERJACK_VENDOR_ID, CYBERJACK_PRODUCT_ID) },
{ } /* Terminating entry */
};
@@ -391,11 +391,10 @@ static void cyberjack_read_bulk_callback(struct urb *urb)
tty = tty_port_tty_get(&port->port);
if (!tty) {
- dbg("%s - ignoring since device not open\n", __func__);
+ dbg("%s - ignoring since device not open", __func__);
return;
}
if (urb->actual_length) {
- tty_buffer_request_room(tty, urb->actual_length);
tty_insert_flip_string(tty, data, urb->actual_length);
tty_flip_buffer_push(tty);
}
diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c
index a591ebec0f89..baf74b44e6ed 100644
--- a/drivers/usb/serial/cypress_m8.c
+++ b/drivers/usb/serial/cypress_m8.c
@@ -66,17 +66,15 @@
#include <linux/serial.h>
#include <linux/delay.h>
#include <linux/uaccess.h>
+#include <asm/unaligned.h>
#include "cypress_m8.h"
-#ifdef CONFIG_USB_SERIAL_DEBUG
- static int debug = 1;
-#else
- static int debug;
-#endif
+static int debug;
static int stats;
static int interval;
+static int unstable_bauds;
/*
* Version Information
@@ -89,24 +87,24 @@ static int interval;
#define CYPRESS_BUF_SIZE 1024
#define CYPRESS_CLOSING_WAIT (30*HZ)
-static struct usb_device_id id_table_earthmate [] = {
+static const struct usb_device_id id_table_earthmate[] = {
{ USB_DEVICE(VENDOR_ID_DELORME, PRODUCT_ID_EARTHMATEUSB) },
{ USB_DEVICE(VENDOR_ID_DELORME, PRODUCT_ID_EARTHMATEUSB_LT20) },
{ } /* Terminating entry */
};
-static struct usb_device_id id_table_cyphidcomrs232 [] = {
+static const struct usb_device_id id_table_cyphidcomrs232[] = {
{ USB_DEVICE(VENDOR_ID_CYPRESS, PRODUCT_ID_CYPHIDCOM) },
{ USB_DEVICE(VENDOR_ID_POWERCOM, PRODUCT_ID_UPS) },
{ } /* Terminating entry */
};
-static struct usb_device_id id_table_nokiaca42v2 [] = {
+static const struct usb_device_id id_table_nokiaca42v2[] = {
{ USB_DEVICE(VENDOR_ID_DAZZLE, PRODUCT_ID_CA42) },
{ } /* Terminating entry */
};
-static struct usb_device_id id_table_combined [] = {
+static const struct usb_device_id id_table_combined[] = {
{ USB_DEVICE(VENDOR_ID_DELORME, PRODUCT_ID_EARTHMATEUSB) },
{ USB_DEVICE(VENDOR_ID_DELORME, PRODUCT_ID_EARTHMATEUSB_LT20) },
{ USB_DEVICE(VENDOR_ID_CYPRESS, PRODUCT_ID_CYPHIDCOM) },
@@ -295,6 +293,9 @@ static int analyze_baud_rate(struct usb_serial_port *port, speed_t new_rate)
struct cypress_private *priv;
priv = usb_get_serial_port_data(port);
+ if (unstable_bauds)
+ return new_rate;
+
/*
* The general purpose firmware for the Cypress M8 allows for
* a maximum speed of 57600bps (I have no idea whether DeLorme
@@ -344,7 +345,8 @@ static int cypress_serial_control(struct tty_struct *tty,
{
int new_baudrate = 0, retval = 0, tries = 0;
struct cypress_private *priv;
- __u8 feature_buffer[5];
+ u8 *feature_buffer;
+ const unsigned int feature_len = 5;
unsigned long flags;
dbg("%s", __func__);
@@ -354,17 +356,18 @@ static int cypress_serial_control(struct tty_struct *tty,
if (!priv->comm_is_ok)
return -ENODEV;
+ feature_buffer = kcalloc(feature_len, sizeof(u8), GFP_KERNEL);
+ if (!feature_buffer)
+ return -ENOMEM;
+
switch (cypress_request_type) {
case CYPRESS_SET_CONFIG:
- new_baudrate = priv->baud_rate;
/* 0 means 'Hang up' so doesn't change the true bit rate */
- if (baud_rate == 0)
- new_baudrate = priv->baud_rate;
- /* Change of speed ? */
- else if (baud_rate != priv->baud_rate) {
+ new_baudrate = priv->baud_rate;
+ if (baud_rate && baud_rate != priv->baud_rate) {
dbg("%s - baud rate is changing", __func__);
retval = analyze_baud_rate(port, baud_rate);
- if (retval >= 0) {
+ if (retval >= 0) {
new_baudrate = retval;
dbg("%s - New baud rate set to %d",
__func__, new_baudrate);
@@ -373,9 +376,8 @@ static int cypress_serial_control(struct tty_struct *tty,
dbg("%s - baud rate is being sent as %d",
__func__, new_baudrate);
- memset(feature_buffer, 0, sizeof(feature_buffer));
/* fill the feature_buffer with new configuration */
- *((u_int32_t *)feature_buffer) = new_baudrate;
+ put_unaligned_le32(new_baudrate, feature_buffer);
feature_buffer[4] |= data_bits; /* assign data bits in 2 bit space ( max 3 ) */
/* 1 bit gap */
feature_buffer[4] |= (stop_bits << 3); /* assign stop bits in 1 bit space */
@@ -397,15 +399,15 @@ static int cypress_serial_control(struct tty_struct *tty,
HID_REQ_SET_REPORT,
USB_DIR_OUT | USB_RECIP_INTERFACE | USB_TYPE_CLASS,
0x0300, 0, feature_buffer,
- sizeof(feature_buffer), 500);
+ feature_len, 500);
if (tries++ >= 3)
break;
- } while (retval != sizeof(feature_buffer) &&
+ } while (retval != feature_len &&
retval != -ENODEV);
- if (retval != sizeof(feature_buffer)) {
+ if (retval != feature_len) {
dev_err(&port->dev, "%s - failed sending serial "
"line settings - %d\n", __func__, retval);
cypress_set_dead(port);
@@ -425,43 +427,42 @@ static int cypress_serial_control(struct tty_struct *tty,
/* Not implemented for this device,
and if we try to do it we're likely
to crash the hardware. */
- return -ENOTTY;
+ retval = -ENOTTY;
+ goto out;
}
dbg("%s - retreiving serial line settings", __func__);
- /* set initial values in feature buffer */
- memset(feature_buffer, 0, sizeof(feature_buffer));
-
do {
retval = usb_control_msg(port->serial->dev,
usb_rcvctrlpipe(port->serial->dev, 0),
HID_REQ_GET_REPORT,
USB_DIR_IN | USB_RECIP_INTERFACE | USB_TYPE_CLASS,
0x0300, 0, feature_buffer,
- sizeof(feature_buffer), 500);
+ feature_len, 500);
if (tries++ >= 3)
break;
- } while (retval != sizeof(feature_buffer)
+ } while (retval != feature_len
&& retval != -ENODEV);
- if (retval != sizeof(feature_buffer)) {
+ if (retval != feature_len) {
dev_err(&port->dev, "%s - failed to retrieve serial "
"line settings - %d\n", __func__, retval);
cypress_set_dead(port);
- return retval;
+ goto out;
} else {
spin_lock_irqsave(&priv->lock, flags);
/* store the config in one byte, and later
use bit masks to check values */
priv->current_config = feature_buffer[4];
- priv->baud_rate = *((u_int32_t *)feature_buffer);
+ priv->baud_rate = get_unaligned_le32(feature_buffer);
spin_unlock_irqrestore(&priv->lock, flags);
}
}
spin_lock_irqsave(&priv->lock, flags);
++priv->cmd_count;
spin_unlock_irqrestore(&priv->lock, flags);
-
+out:
+ kfree(feature_buffer);
return retval;
} /* cypress_serial_control */
@@ -690,7 +691,6 @@ static void cypress_dtr_rts(struct usb_serial_port *port, int on)
{
struct cypress_private *priv = usb_get_serial_port_data(port);
/* drop dtr and rts */
- priv = usb_get_serial_port_data(port);
spin_lock_irq(&priv->lock);
if (on == 0)
priv->line_control = 0;
@@ -1307,13 +1307,9 @@ static void cypress_read_int_callback(struct urb *urb)
spin_unlock_irqrestore(&priv->lock, flags);
/* process read if there is data other than line status */
- if (tty && (bytes > i)) {
- bytes = tty_buffer_request_room(tty, bytes);
- for (; i < bytes ; ++i) {
- dbg("pushing byte number %d - %d - %c", i, data[i],
- data[i]);
- tty_insert_flip_char(tty, data[i], tty_flag);
- }
+ if (tty && bytes > i) {
+ tty_insert_flip_string_fixed_flag(tty, data + i,
+ bytes - i, tty_flag);
tty_flip_buffer_push(tty);
}
@@ -1325,9 +1321,9 @@ static void cypress_read_int_callback(struct urb *urb)
continue_read:
tty_kref_put(tty);
- /* Continue trying to always read... unless the port has closed. */
+ /* Continue trying to always read */
- if (port->port.count > 0 && priv->comm_is_ok) {
+ if (priv->comm_is_ok) {
usb_fill_int_urb(port->interrupt_in_urb, port->serial->dev,
usb_rcvintpipe(port->serial->dev,
port->interrupt_in_endpointAddress),
@@ -1336,7 +1332,7 @@ continue_read:
cypress_read_int_callback, port,
priv->read_urb_interval);
result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC);
- if (result) {
+ if (result && result != -EPERM) {
dev_err(&urb->dev->dev, "%s - failed resubmitting "
"read urb, error %d\n", __func__,
result);
@@ -1650,3 +1646,5 @@ module_param(stats, bool, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(stats, "Enable statistics or not");
module_param(interval, int, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(interval, "Overrides interrupt interval");
+module_param(unstable_bauds, bool, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(unstable_bauds, "Allow unstable baud rates");
diff --git a/drivers/usb/serial/digi_acceleport.c b/drivers/usb/serial/digi_acceleport.c
index 68e80be6b9e1..68b0aa5e516c 100644
--- a/drivers/usb/serial/digi_acceleport.c
+++ b/drivers/usb/serial/digi_acceleport.c
@@ -470,18 +470,18 @@ static int digi_read_oob_callback(struct urb *urb);
static int debug;
-static struct usb_device_id id_table_combined [] = {
+static const struct usb_device_id id_table_combined[] = {
{ USB_DEVICE(DIGI_VENDOR_ID, DIGI_2_ID) },
{ USB_DEVICE(DIGI_VENDOR_ID, DIGI_4_ID) },
{ } /* Terminating entry */
};
-static struct usb_device_id id_table_2 [] = {
+static const struct usb_device_id id_table_2[] = {
{ USB_DEVICE(DIGI_VENDOR_ID, DIGI_2_ID) },
{ } /* Terminating entry */
};
-static struct usb_device_id id_table_4 [] = {
+static const struct usb_device_id id_table_4[] = {
{ USB_DEVICE(DIGI_VENDOR_ID, DIGI_4_ID) },
{ } /* Terminating entry */
};
@@ -1262,10 +1262,10 @@ static void digi_write_bulk_callback(struct urb *urb)
return;
}
- /* try to send any buffered data on this port, if it is open */
+ /* try to send any buffered data on this port */
spin_lock(&priv->dp_port_lock);
priv->dp_write_urb_in_use = 0;
- if (port->port.count && priv->dp_out_buf_len > 0) {
+ if (priv->dp_out_buf_len > 0) {
*((unsigned char *)(port->write_urb->transfer_buffer))
= (unsigned char)DIGI_CMD_SEND_DATA;
*((unsigned char *)(port->write_urb->transfer_buffer) + 1)
@@ -1288,7 +1288,7 @@ static void digi_write_bulk_callback(struct urb *urb)
schedule_work(&priv->dp_wakeup_work);
spin_unlock(&priv->dp_port_lock);
- if (ret)
+ if (ret && ret != -EPERM)
dev_err(&port->dev,
"%s: usb_submit_urb failed, ret=%d, port=%d\n",
__func__, ret, priv->dp_port_num);
@@ -1353,8 +1353,7 @@ static int digi_open(struct tty_struct *tty, struct usb_serial_port *port)
struct digi_port *priv = usb_get_serial_port_data(port);
struct ktermios not_termios;
- dbg("digi_open: TOP: port=%d, open_count=%d",
- priv->dp_port_num, port->port.count);
+ dbg("digi_open: TOP: port=%d", priv->dp_port_num);
/* be sure the device is started up */
if (digi_startup_device(port->serial) != 0)
@@ -1393,8 +1392,7 @@ static void digi_close(struct usb_serial_port *port)
unsigned char buf[32];
struct digi_port *priv = usb_get_serial_port_data(port);
- dbg("digi_close: TOP: port=%d, open_count=%d",
- priv->dp_port_num, port->port.count);
+ dbg("digi_close: TOP: port=%d", priv->dp_port_num);
mutex_lock(&port->serial->disc_mutex);
/* if disconnected, just clear flags */
@@ -1629,7 +1627,7 @@ static void digi_read_bulk_callback(struct urb *urb)
/* continue read */
urb->dev = port->serial->dev;
ret = usb_submit_urb(urb, GFP_ATOMIC);
- if (ret != 0) {
+ if (ret != 0 && ret != -EPERM) {
dev_err(&port->dev,
"%s: failed resubmitting urb, ret=%d, port=%d\n",
__func__, ret, priv->dp_port_num);
@@ -1658,12 +1656,11 @@ static int digi_read_inb_callback(struct urb *urb)
int port_status = ((unsigned char *)urb->transfer_buffer)[2];
unsigned char *data = ((unsigned char *)urb->transfer_buffer) + 3;
int flag, throttled;
- int i;
int status = urb->status;
/* do not process callbacks on closed ports */
/* but do continue the read chain */
- if (port->port.count == 0)
+ if (urb->status == -ENOENT)
return 0;
/* short/multiple packet check */
@@ -1705,17 +1702,9 @@ static int digi_read_inb_callback(struct urb *urb)
/* data length is len-1 (one byte of len is port_status) */
--len;
-
- len = tty_buffer_request_room(tty, len);
if (len > 0) {
- /* Hot path */
- if (flag == TTY_NORMAL)
- tty_insert_flip_string(tty, data, len);
- else {
- for (i = 0; i < len; i++)
- tty_insert_flip_char(tty,
- data[i], flag);
- }
+ tty_insert_flip_string_fixed_flag(tty, data, len,
+ flag);
tty_flip_buffer_push(tty);
}
}
@@ -1776,8 +1765,7 @@ static int digi_read_oob_callback(struct urb *urb)
tty = tty_port_tty_get(&port->port);
rts = 0;
- if (port->port.count)
- rts = tty->termios->c_cflag & CRTSCTS;
+ rts = tty->termios->c_cflag & CRTSCTS;
if (opcode == DIGI_CMD_READ_INPUT_SIGNALS) {
spin_lock(&priv->dp_port_lock);
diff --git a/drivers/usb/serial/empeg.c b/drivers/usb/serial/empeg.c
index 7dd0e3eadbe6..5f740a1eacab 100644
--- a/drivers/usb/serial/empeg.c
+++ b/drivers/usb/serial/empeg.c
@@ -93,7 +93,7 @@ static void empeg_init_termios(struct tty_struct *tty);
static void empeg_write_bulk_callback(struct urb *urb);
static void empeg_read_bulk_callback(struct urb *urb);
-static struct usb_device_id id_table [] = {
+static const struct usb_device_id id_table[] = {
{ USB_DEVICE(EMPEG_VENDOR_ID, EMPEG_PRODUCT_ID) },
{ } /* Terminating entry */
};
@@ -346,7 +346,6 @@ static void empeg_read_bulk_callback(struct urb *urb)
tty = tty_port_tty_get(&port->port);
if (urb->actual_length) {
- tty_buffer_request_room(tty, urb->actual_length);
tty_insert_flip_string(tty, data, urb->actual_length);
tty_flip_buffer_push(tty);
bytes_in += urb->actual_length;
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 7638828e7317..6af0dfa5f5ac 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -33,12 +33,12 @@
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/slab.h>
-#include <linux/smp_lock.h>
#include <linux/tty.h>
#include <linux/tty_driver.h>
#include <linux/tty_flip.h>
#include <linux/module.h>
#include <linux/spinlock.h>
+#include <linux/mutex.h>
#include <linux/uaccess.h>
#include <linux/usb.h>
#include <linux/serial.h>
@@ -88,10 +88,10 @@ struct ftdi_private {
unsigned int latency; /* latency setting in use */
spinlock_t tx_lock; /* spinlock for transmit state */
- unsigned long tx_bytes;
unsigned long tx_outstanding_bytes;
unsigned long tx_outstanding_urbs;
unsigned short max_packet_size;
+ struct mutex cfg_lock; /* Avoid mess by parallel calls of config ioctl() */
};
/* struct ftdi_sio_quirk is used by devices requiring special attention. */
@@ -614,6 +614,7 @@ static struct usb_device_id id_table_combined [] = {
{ USB_DEVICE(FTDI_VID, FTDI_OCEANIC_PID) },
{ USB_DEVICE(TTI_VID, TTI_QL355P_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_RM_CANVIEW_PID) },
+ { USB_DEVICE(CONTEC_VID, CONTEC_COM1USBH_PID) },
{ USB_DEVICE(BANDB_VID, BANDB_USOTL4_PID) },
{ USB_DEVICE(BANDB_VID, BANDB_USTL4_PID) },
{ USB_DEVICE(BANDB_VID, BANDB_USO9ML2_PID) },
@@ -737,6 +738,10 @@ static struct usb_device_id id_table_combined [] = {
.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
{ USB_DEVICE(FTDI_VID, HAMEG_HO820_PID) },
{ USB_DEVICE(FTDI_VID, HAMEG_HO870_PID) },
+ { USB_DEVICE(FTDI_VID, MJSG_GENERIC_PID) },
+ { USB_DEVICE(FTDI_VID, MJSG_SR_RADIO_PID) },
+ { USB_DEVICE(FTDI_VID, MJSG_HD_RADIO_PID) },
+ { USB_DEVICE(FTDI_VID, MJSG_XM_RADIO_PID) },
{ }, /* Optional parameter entry */
{ } /* Terminating entry */
};
@@ -812,7 +817,7 @@ static struct usb_serial_driver ftdi_sio_device = {
.name = "ftdi_sio",
},
.description = "FTDI USB Serial Device",
- .usb_driver = &ftdi_driver ,
+ .usb_driver = &ftdi_driver,
.id_table = id_table_combined,
.num_ports = 1,
.probe = ftdi_sio_probe,
@@ -828,8 +833,8 @@ static struct usb_serial_driver ftdi_sio_device = {
.chars_in_buffer = ftdi_chars_in_buffer,
.read_bulk_callback = ftdi_read_bulk_callback,
.write_bulk_callback = ftdi_write_bulk_callback,
- .tiocmget = ftdi_tiocmget,
- .tiocmset = ftdi_tiocmset,
+ .tiocmget = ftdi_tiocmget,
+ .tiocmset = ftdi_tiocmset,
.ioctl = ftdi_ioctl,
.set_termios = ftdi_set_termios,
.break_ctl = ftdi_break_ctl,
@@ -935,7 +940,6 @@ static int update_mctrl(struct usb_serial_port *port, unsigned int set,
unsigned int clear)
{
struct ftdi_private *priv = usb_get_serial_port_data(port);
- char *buf;
unsigned urb_value;
int rv;
@@ -944,10 +948,6 @@ static int update_mctrl(struct usb_serial_port *port, unsigned int set,
return 0; /* no change */
}
- buf = kmalloc(1, GFP_NOIO);
- if (!buf)
- return -ENOMEM;
-
clear &= ~set; /* 'set' takes precedence over 'clear' */
urb_value = 0;
if (clear & TIOCM_DTR)
@@ -963,9 +963,7 @@ static int update_mctrl(struct usb_serial_port *port, unsigned int set,
FTDI_SIO_SET_MODEM_CTRL_REQUEST,
FTDI_SIO_SET_MODEM_CTRL_REQUEST_TYPE,
urb_value, priv->interface,
- buf, 0, WDR_TIMEOUT);
-
- kfree(buf);
+ NULL, 0, WDR_TIMEOUT);
if (rv < 0) {
dbg("%s Error from MODEM_CTRL urb: DTR %s, RTS %s",
__func__,
@@ -1124,16 +1122,11 @@ static __u32 get_ftdi_divisor(struct tty_struct *tty,
static int change_speed(struct tty_struct *tty, struct usb_serial_port *port)
{
struct ftdi_private *priv = usb_get_serial_port_data(port);
- char *buf;
__u16 urb_value;
__u16 urb_index;
__u32 urb_index_value;
int rv;
- buf = kmalloc(1, GFP_NOIO);
- if (!buf)
- return -ENOMEM;
-
urb_index_value = get_ftdi_divisor(tty, port);
urb_value = (__u16)urb_index_value;
urb_index = (__u16)(urb_index_value >> 16);
@@ -1146,9 +1139,7 @@ static int change_speed(struct tty_struct *tty, struct usb_serial_port *port)
FTDI_SIO_SET_BAUDRATE_REQUEST,
FTDI_SIO_SET_BAUDRATE_REQUEST_TYPE,
urb_value, urb_index,
- buf, 0, WDR_SHORT_TIMEOUT);
-
- kfree(buf);
+ NULL, 0, WDR_SHORT_TIMEOUT);
return rv;
}
@@ -1156,8 +1147,7 @@ static int write_latency_timer(struct usb_serial_port *port)
{
struct ftdi_private *priv = usb_get_serial_port_data(port);
struct usb_device *udev = port->serial->dev;
- char buf[1];
- int rv = 0;
+ int rv;
int l = priv->latency;
if (priv->flags & ASYNC_LOW_LATENCY)
@@ -1170,8 +1160,7 @@ static int write_latency_timer(struct usb_serial_port *port)
FTDI_SIO_SET_LATENCY_TIMER_REQUEST,
FTDI_SIO_SET_LATENCY_TIMER_REQUEST_TYPE,
l, priv->interface,
- buf, 0, WDR_TIMEOUT);
-
+ NULL, 0, WDR_TIMEOUT);
if (rv < 0)
dev_err(&port->dev, "Unable to write latency timer: %i\n", rv);
return rv;
@@ -1181,24 +1170,29 @@ static int read_latency_timer(struct usb_serial_port *port)
{
struct ftdi_private *priv = usb_get_serial_port_data(port);
struct usb_device *udev = port->serial->dev;
- unsigned short latency = 0;
- int rv = 0;
-
+ unsigned char *buf;
+ int rv;
dbg("%s", __func__);
+ buf = kmalloc(1, GFP_KERNEL);
+ if (!buf)
+ return -ENOMEM;
+
rv = usb_control_msg(udev,
usb_rcvctrlpipe(udev, 0),
FTDI_SIO_GET_LATENCY_TIMER_REQUEST,
FTDI_SIO_GET_LATENCY_TIMER_REQUEST_TYPE,
0, priv->interface,
- (char *) &latency, 1, WDR_TIMEOUT);
-
- if (rv < 0) {
+ buf, 1, WDR_TIMEOUT);
+ if (rv < 0)
dev_err(&port->dev, "Unable to read latency timer: %i\n", rv);
- return -EIO;
- }
- return latency;
+ else
+ priv->latency = buf[0];
+
+ kfree(buf);
+
+ return rv;
}
static int get_serial_info(struct usb_serial_port *port,
@@ -1229,7 +1223,7 @@ static int set_serial_info(struct tty_struct *tty,
if (copy_from_user(&new_serial, newinfo, sizeof(new_serial)))
return -EFAULT;
- lock_kernel();
+ mutex_lock(&priv->cfg_lock);
old_priv = *priv;
/* Do error checking and permission checking */
@@ -1237,7 +1231,7 @@ static int set_serial_info(struct tty_struct *tty,
if (!capable(CAP_SYS_ADMIN)) {
if (((new_serial.flags & ~ASYNC_USR_MASK) !=
(priv->flags & ~ASYNC_USR_MASK))) {
- unlock_kernel();
+ mutex_unlock(&priv->cfg_lock);
return -EPERM;
}
priv->flags = ((priv->flags & ~ASYNC_USR_MASK) |
@@ -1248,7 +1242,7 @@ static int set_serial_info(struct tty_struct *tty,
if ((new_serial.baud_base != priv->baud_base) &&
(new_serial.baud_base < 9600)) {
- unlock_kernel();
+ mutex_unlock(&priv->cfg_lock);
return -EINVAL;
}
@@ -1278,11 +1272,11 @@ check_and_exit:
(priv->flags & ASYNC_SPD_MASK)) ||
(((priv->flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST) &&
(old_priv.custom_divisor != priv->custom_divisor))) {
- unlock_kernel();
+ mutex_unlock(&priv->cfg_lock);
change_speed(tty, port);
}
else
- unlock_kernel();
+ mutex_unlock(&priv->cfg_lock);
return 0;
} /* set_serial_info */
@@ -1338,20 +1332,20 @@ static void ftdi_determine_type(struct usb_serial_port *port)
__func__);
}
} else if (version < 0x200) {
- /* Old device. Assume its the original SIO. */
+ /* Old device. Assume it's the original SIO. */
priv->chip_type = SIO;
priv->baud_base = 12000000 / 16;
priv->write_offset = 1;
} else if (version < 0x400) {
- /* Assume its an FT8U232AM (or FT8U245AM) */
+ /* Assume it's an FT8U232AM (or FT8U245AM) */
/* (It might be a BM because of the iSerialNumber bug,
* but it will still work as an AM device.) */
priv->chip_type = FT8U232AM;
} else if (version < 0x600) {
- /* Assume its an FT232BM (or FT245BM) */
+ /* Assume it's an FT232BM (or FT245BM) */
priv->chip_type = FT232BM;
} else {
- /* Assume its an FT232R */
+ /* Assume it's an FT232R */
priv->chip_type = FT232RL;
}
dev_info(&udev->dev, "Detected %s\n", ftdi_chip_name[priv->chip_type]);
@@ -1371,7 +1365,7 @@ static void ftdi_set_max_packet_size(struct usb_serial_port *port)
struct usb_endpoint_descriptor *ep_desc = &interface->cur_altsetting->endpoint[1].desc;
unsigned num_endpoints;
- int i = 0;
+ int i;
num_endpoints = interface->cur_altsetting->desc.bNumEndpoints;
dev_info(&udev->dev, "Number of endpoints %d\n", num_endpoints);
@@ -1423,7 +1417,7 @@ static ssize_t store_latency_timer(struct device *dev,
struct usb_serial_port *port = to_usb_serial_port(dev);
struct ftdi_private *priv = usb_get_serial_port_data(port);
int v = simple_strtoul(valbuf, NULL, 10);
- int rv = 0;
+ int rv;
priv->latency = v;
rv = write_latency_timer(port);
@@ -1440,9 +1434,8 @@ static ssize_t store_event_char(struct device *dev,
struct usb_serial_port *port = to_usb_serial_port(dev);
struct ftdi_private *priv = usb_get_serial_port_data(port);
struct usb_device *udev = port->serial->dev;
- char buf[1];
int v = simple_strtoul(valbuf, NULL, 10);
- int rv = 0;
+ int rv;
dbg("%s: setting event char = %i", __func__, v);
@@ -1451,8 +1444,7 @@ static ssize_t store_event_char(struct device *dev,
FTDI_SIO_SET_EVENT_CHAR_REQUEST,
FTDI_SIO_SET_EVENT_CHAR_REQUEST_TYPE,
v, priv->interface,
- buf, 0, WDR_TIMEOUT);
-
+ NULL, 0, WDR_TIMEOUT);
if (rv < 0) {
dbg("Unable to write event character: %i", rv);
return -EIO;
@@ -1551,9 +1543,9 @@ static int ftdi_sio_port_probe(struct usb_serial_port *port)
kref_init(&priv->kref);
spin_lock_init(&priv->tx_lock);
+ mutex_init(&priv->cfg_lock);
init_waitqueue_head(&priv->delta_msr_wait);
- /* This will push the characters through immediately rather
- than queue a task to deliver them */
+
priv->flags = ASYNC_LOW_LATENCY;
if (quirk && quirk->port_probe)
@@ -1585,7 +1577,8 @@ static int ftdi_sio_port_probe(struct usb_serial_port *port)
ftdi_determine_type(port);
ftdi_set_max_packet_size(port);
- read_latency_timer(port);
+ if (read_latency_timer(port) < 0)
+ priv->latency = 16;
create_sysfs_attrs(port);
return 0;
}
@@ -1630,8 +1623,6 @@ static int ftdi_NDI_device_setup(struct usb_serial *serial)
{
struct usb_device *udev = serial->dev;
int latency = ndi_latency_timer;
- int rv = 0;
- char buf[1];
if (latency == 0)
latency = 1;
@@ -1641,10 +1632,11 @@ static int ftdi_NDI_device_setup(struct usb_serial *serial)
dbg("%s setting NDI device latency to %d", __func__, latency);
dev_info(&udev->dev, "NDI device with a latency value of %d", latency);
- rv = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
+ /* FIXME: errors are not returned */
+ usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
FTDI_SIO_SET_LATENCY_TIMER_REQUEST,
FTDI_SIO_SET_LATENCY_TIMER_REQUEST_TYPE,
- latency, 0, buf, 0, WDR_TIMEOUT);
+ latency, 0, NULL, 0, WDR_TIMEOUT);
return 0;
}
@@ -1720,7 +1712,7 @@ static int ftdi_submit_read_urb(struct usb_serial_port *port, gfp_t mem_flags)
urb->transfer_buffer_length,
ftdi_read_bulk_callback, port);
result = usb_submit_urb(urb, mem_flags);
- if (result)
+ if (result && result != -EPERM)
dev_err(&port->dev,
"%s - failed submitting read urb, error %d\n",
__func__, result);
@@ -1732,16 +1724,10 @@ static int ftdi_open(struct tty_struct *tty, struct usb_serial_port *port)
struct usb_device *dev = port->serial->dev;
struct ftdi_private *priv = usb_get_serial_port_data(port);
unsigned long flags;
-
- int result = 0;
- char buf[1]; /* Needed for the usb_control_msg I think */
+ int result;
dbg("%s", __func__);
- spin_lock_irqsave(&priv->tx_lock, flags);
- priv->tx_bytes = 0;
- spin_unlock_irqrestore(&priv->tx_lock, flags);
-
write_latency_timer(port);
/* No error checking for this (will get errors later anyway) */
@@ -1749,7 +1735,7 @@ static int ftdi_open(struct tty_struct *tty, struct usb_serial_port *port)
usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
FTDI_SIO_RESET_REQUEST, FTDI_SIO_RESET_REQUEST_TYPE,
FTDI_SIO_RESET_SIO,
- priv->interface, buf, 0, WDR_TIMEOUT);
+ priv->interface, NULL, 0, WDR_TIMEOUT);
/* Termios defaults are set by usb_serial_init. We don't change
port->tty->termios - this would lose speed settings, etc.
@@ -1777,7 +1763,6 @@ static int ftdi_open(struct tty_struct *tty, struct usb_serial_port *port)
static void ftdi_dtr_rts(struct usb_serial_port *port, int on)
{
struct ftdi_private *priv = usb_get_serial_port_data(port);
- char buf[1];
mutex_lock(&port->serial->disc_mutex);
if (!port->serial->disconnected) {
@@ -1786,7 +1771,7 @@ static void ftdi_dtr_rts(struct usb_serial_port *port, int on)
usb_sndctrlpipe(port->serial->dev, 0),
FTDI_SIO_SET_FLOW_CTRL_REQUEST,
FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE,
- 0, priv->interface, buf, 0,
+ 0, priv->interface, NULL, 0,
WDR_TIMEOUT) < 0) {
dev_err(&port->dev, "error from flowcontrol urb\n");
}
@@ -1847,7 +1832,7 @@ static int ftdi_write(struct tty_struct *tty, struct usb_serial_port *port,
spin_lock_irqsave(&priv->tx_lock, flags);
if (priv->tx_outstanding_urbs > URB_UPPER_LIMIT) {
spin_unlock_irqrestore(&priv->tx_lock, flags);
- dbg("%s - write limit hit\n", __func__);
+ dbg("%s - write limit hit", __func__);
return 0;
}
priv->tx_outstanding_urbs++;
@@ -1927,7 +1912,6 @@ static int ftdi_write(struct tty_struct *tty, struct usb_serial_port *port,
} else {
spin_lock_irqsave(&priv->tx_lock, flags);
priv->tx_outstanding_bytes += count;
- priv->tx_bytes += count;
spin_unlock_irqrestore(&priv->tx_lock, flags);
}
@@ -2154,8 +2138,7 @@ static void ftdi_break_ctl(struct tty_struct *tty, int break_state)
{
struct usb_serial_port *port = tty->driver_data;
struct ftdi_private *priv = usb_get_serial_port_data(port);
- __u16 urb_value = 0;
- char buf[1];
+ __u16 urb_value;
/* break_state = -1 to turn on break, and 0 to turn off break */
/* see drivers/char/tty_io.c to see it used */
@@ -2171,7 +2154,7 @@ static void ftdi_break_ctl(struct tty_struct *tty, int break_state)
FTDI_SIO_SET_DATA_REQUEST,
FTDI_SIO_SET_DATA_REQUEST_TYPE,
urb_value , priv->interface,
- buf, 0, WDR_TIMEOUT) < 0) {
+ NULL, 0, WDR_TIMEOUT) < 0) {
dev_err(&port->dev, "%s FAILED to enable/disable break state "
"(state was %d)\n", __func__, break_state);
}
@@ -2195,7 +2178,6 @@ static void ftdi_set_termios(struct tty_struct *tty,
struct ktermios *termios = tty->termios;
unsigned int cflag = termios->c_cflag;
__u16 urb_value; /* will hold the new flags */
- char buf[1]; /* Perhaps I should dynamically alloc this? */
/* Added for xon/xoff support */
unsigned int iflag = termios->c_iflag;
@@ -2246,12 +2228,10 @@ static void ftdi_set_termios(struct tty_struct *tty,
}
if (cflag & CSIZE) {
switch (cflag & CSIZE) {
- case CS5: urb_value |= 5; dbg("Setting CS5"); break;
- case CS6: urb_value |= 6; dbg("Setting CS6"); break;
case CS7: urb_value |= 7; dbg("Setting CS7"); break;
case CS8: urb_value |= 8; dbg("Setting CS8"); break;
default:
- dev_err(&port->dev, "CSIZE was set but not CS5-CS8\n");
+ dev_err(&port->dev, "CSIZE was set but not CS7-CS8\n");
}
}
@@ -2263,7 +2243,7 @@ static void ftdi_set_termios(struct tty_struct *tty,
FTDI_SIO_SET_DATA_REQUEST,
FTDI_SIO_SET_DATA_REQUEST_TYPE,
urb_value , priv->interface,
- buf, 0, WDR_SHORT_TIMEOUT) < 0) {
+ NULL, 0, WDR_SHORT_TIMEOUT) < 0) {
dev_err(&port->dev, "%s FAILED to set "
"databits/stopbits/parity\n", __func__);
}
@@ -2275,7 +2255,7 @@ static void ftdi_set_termios(struct tty_struct *tty,
FTDI_SIO_SET_FLOW_CTRL_REQUEST,
FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE,
0, priv->interface,
- buf, 0, WDR_TIMEOUT) < 0) {
+ NULL, 0, WDR_TIMEOUT) < 0) {
dev_err(&port->dev,
"%s error from disable flowcontrol urb\n",
__func__);
@@ -2301,7 +2281,7 @@ static void ftdi_set_termios(struct tty_struct *tty,
FTDI_SIO_SET_FLOW_CTRL_REQUEST,
FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE,
0 , (FTDI_SIO_RTS_CTS_HS | priv->interface),
- buf, 0, WDR_TIMEOUT) < 0) {
+ NULL, 0, WDR_TIMEOUT) < 0) {
dev_err(&port->dev,
"urb failed to set to rts/cts flow control\n");
}
@@ -2333,7 +2313,7 @@ static void ftdi_set_termios(struct tty_struct *tty,
FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE,
urb_value , (FTDI_SIO_XON_XOFF_HS
| priv->interface),
- buf, 0, WDR_TIMEOUT) < 0) {
+ NULL, 0, WDR_TIMEOUT) < 0) {
dev_err(&port->dev, "urb failed to set to "
"xon/xoff flow control\n");
}
@@ -2347,7 +2327,7 @@ static void ftdi_set_termios(struct tty_struct *tty,
FTDI_SIO_SET_FLOW_CTRL_REQUEST,
FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE,
0, priv->interface,
- buf, 0, WDR_TIMEOUT) < 0) {
+ NULL, 0, WDR_TIMEOUT) < 0) {
dev_err(&port->dev,
"urb failed to clear flow control\n");
}
@@ -2361,21 +2341,22 @@ static int ftdi_tiocmget(struct tty_struct *tty, struct file *file)
{
struct usb_serial_port *port = tty->driver_data;
struct ftdi_private *priv = usb_get_serial_port_data(port);
- unsigned char buf[2];
+ unsigned char *buf;
+ int len;
int ret;
dbg("%s TIOCMGET", __func__);
+
+ buf = kmalloc(2, GFP_KERNEL);
+ if (!buf)
+ return -ENOMEM;
+ /*
+ * The 8U232AM returns a two byte value (the SIO a 1 byte value) in
+ * the same format as the data returned from the in point.
+ */
switch (priv->chip_type) {
case SIO:
- /* Request the status from the device */
- ret = usb_control_msg(port->serial->dev,
- usb_rcvctrlpipe(port->serial->dev, 0),
- FTDI_SIO_GET_MODEM_STATUS_REQUEST,
- FTDI_SIO_GET_MODEM_STATUS_REQUEST_TYPE,
- 0, 0,
- buf, 1, WDR_TIMEOUT);
- if (ret < 0)
- return ret;
+ len = 1;
break;
case FT8U232AM:
case FT232BM:
@@ -2383,27 +2364,30 @@ static int ftdi_tiocmget(struct tty_struct *tty, struct file *file)
case FT232RL:
case FT2232H:
case FT4232H:
- /* the 8U232AM returns a two byte value (the sio is a 1 byte
- value) - in the same format as the data returned from the in
- point */
- ret = usb_control_msg(port->serial->dev,
- usb_rcvctrlpipe(port->serial->dev, 0),
- FTDI_SIO_GET_MODEM_STATUS_REQUEST,
- FTDI_SIO_GET_MODEM_STATUS_REQUEST_TYPE,
- 0, priv->interface,
- buf, 2, WDR_TIMEOUT);
- if (ret < 0)
- return ret;
+ len = 2;
break;
default:
- return -EFAULT;
+ ret = -EFAULT;
+ goto out;
}
- return (buf[0] & FTDI_SIO_DSR_MASK ? TIOCM_DSR : 0) |
+ ret = usb_control_msg(port->serial->dev,
+ usb_rcvctrlpipe(port->serial->dev, 0),
+ FTDI_SIO_GET_MODEM_STATUS_REQUEST,
+ FTDI_SIO_GET_MODEM_STATUS_REQUEST_TYPE,
+ 0, priv->interface,
+ buf, len, WDR_TIMEOUT);
+ if (ret < 0)
+ goto out;
+
+ ret = (buf[0] & FTDI_SIO_DSR_MASK ? TIOCM_DSR : 0) |
(buf[0] & FTDI_SIO_CTS_MASK ? TIOCM_CTS : 0) |
(buf[0] & FTDI_SIO_RI_MASK ? TIOCM_RI : 0) |
(buf[0] & FTDI_SIO_RLSD_MASK ? TIOCM_CD : 0) |
priv->last_dtr_rts;
+out:
+ kfree(buf);
+ return ret;
}
static int ftdi_tiocmset(struct tty_struct *tty, struct file *file,
@@ -2508,8 +2492,7 @@ void ftdi_unthrottle(struct tty_struct *tty)
port->throttled = port->throttle_req = 0;
spin_unlock_irqrestore(&port->lock, flags);
- /* Resubmit urb if throttled and open. */
- if (was_throttled && test_bit(ASYNCB_INITIALIZED, &port->port.flags))
+ if (was_throttled)
ftdi_submit_read_urb(port, GFP_KERNEL);
}
diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h
index b0e0d64f822e..ff9bf80327a3 100644
--- a/drivers/usb/serial/ftdi_sio.h
+++ b/drivers/usb/serial/ftdi_sio.h
@@ -28,13 +28,13 @@
#define FTDI_SIO_SET_FLOW_CTRL 2 /* Set flow control register */
#define FTDI_SIO_SET_BAUD_RATE 3 /* Set baud rate */
#define FTDI_SIO_SET_DATA 4 /* Set the data characteristics of the port */
-#define FTDI_SIO_GET_MODEM_STATUS 5 /* Retrieve current value of modern status register */
+#define FTDI_SIO_GET_MODEM_STATUS 5 /* Retrieve current value of modem status register */
#define FTDI_SIO_SET_EVENT_CHAR 6 /* Set the event character */
#define FTDI_SIO_SET_ERROR_CHAR 7 /* Set the error character */
#define FTDI_SIO_SET_LATENCY_TIMER 9 /* Set the latency timer */
#define FTDI_SIO_GET_LATENCY_TIMER 10 /* Get the latency timer */
-/* Interface indicies for FT2232, FT2232H and FT4232H devices*/
+/* Interface indices for FT2232, FT2232H and FT4232H devices */
#define INTERFACE_A 1
#define INTERFACE_B 2
#define INTERFACE_C 3
@@ -270,7 +270,7 @@ typedef enum {
* BmRequestType: 0100 0000b
* bRequest: FTDI_SIO_SET_FLOW_CTRL
* wValue: Xoff/Xon
- * wIndex: Protocol/Port - hIndex is protocl / lIndex is port
+ * wIndex: Protocol/Port - hIndex is protocol / lIndex is port
* wLength: 0
* Data: None
*
diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h
index c8951aeed983..0727e198503e 100644
--- a/drivers/usb/serial/ftdi_sio_ids.h
+++ b/drivers/usb/serial/ftdi_sio_ids.h
@@ -22,7 +22,7 @@
#define FTDI_8U232AM_ALT_PID 0x6006 /* FTDI's alternate PID for above */
#define FTDI_8U2232C_PID 0x6010 /* Dual channel device */
#define FTDI_4232H_PID 0x6011 /* Quad channel hi-speed device */
-#define FTDI_SIO_PID 0x8372 /* Product Id SIO application of 8U100AX */
+#define FTDI_SIO_PID 0x8372 /* Product Id SIO application of 8U100AX */
#define FTDI_232RL_PID 0xFBFA /* Product ID for FT232RL */
@@ -49,7 +49,7 @@
#define LMI_LM3S_DEVEL_BOARD_PID 0xbcd8
#define LMI_LM3S_EVAL_BOARD_PID 0xbcd9
-#define FTDI_TURTELIZER_PID 0xBDC8 /* JTAG/RS-232 adapter by egnite GmBH */
+#define FTDI_TURTELIZER_PID 0xBDC8 /* JTAG/RS-232 adapter by egnite GmbH */
/* OpenDCC (www.opendcc.de) product id */
#define FTDI_OPENDCC_PID 0xBFD8
@@ -185,7 +185,7 @@
#define FTDI_ELV_TFD128_PID 0xE0EC /* ELV Temperatur-Feuchte-Datenlogger TFD 128 */
#define FTDI_ELV_FM3RX_PID 0xE0ED /* ELV Messwertuebertragung FM3 RX */
#define FTDI_ELV_WS777_PID 0xE0EE /* Conrad WS 777 */
-#define FTDI_ELV_EM1010PC_PID 0xE0EF /* Engery monitor EM 1010 PC */
+#define FTDI_ELV_EM1010PC_PID 0xE0EF /* Energy monitor EM 1010 PC */
#define FTDI_ELV_CSI8_PID 0xE0F0 /* Computer-Schalt-Interface (CSI 8) */
#define FTDI_ELV_EM1000DL_PID 0xE0F1 /* PC-Datenlogger fuer Energiemonitor (EM 1000 DL) */
#define FTDI_ELV_PCK100_PID 0xE0F2 /* PC-Kabeltester (PCK 100) */
@@ -212,8 +212,8 @@
* drivers, or possibly the Comedi drivers in some cases. */
#define FTDI_ELV_CLI7000_PID 0xFB59 /* Computer-Light-Interface (CLI 7000) */
#define FTDI_ELV_PPS7330_PID 0xFB5C /* Processor-Power-Supply (PPS 7330) */
-#define FTDI_ELV_TFM100_PID 0xFB5D /* Temperartur-Feuchte Messgeraet (TFM 100) */
-#define FTDI_ELV_UDF77_PID 0xFB5E /* USB DCF Funkurh (UDF 77) */
+#define FTDI_ELV_TFM100_PID 0xFB5D /* Temperatur-Feuchte-Messgeraet (TFM 100) */
+#define FTDI_ELV_UDF77_PID 0xFB5E /* USB DCF Funkuhr (UDF 77) */
#define FTDI_ELV_UIO88_PID 0xFB5F /* USB-I/O Interface (UIO 88) */
/*
@@ -320,7 +320,7 @@
/*
* 4N-GALAXY.DE PIDs for CAN-USB, USB-RS232, USB-RS422, USB-RS485,
- * USB-TTY activ, USB-TTY passiv. Some PIDs are used by several devices
+ * USB-TTY aktiv, USB-TTY passiv. Some PIDs are used by several devices
* and I'm not entirely sure which are used by which.
*/
#define FTDI_4N_GALAXY_DE_1_PID 0xF3C0
@@ -330,10 +330,10 @@
* Linx Technologies product ids
*/
#define LINX_SDMUSBQSS_PID 0xF448 /* Linx SDM-USB-QS-S */
-#define LINX_MASTERDEVEL2_PID 0xF449 /* Linx Master Development 2.0 */
-#define LINX_FUTURE_0_PID 0xF44A /* Linx future device */
-#define LINX_FUTURE_1_PID 0xF44B /* Linx future device */
-#define LINX_FUTURE_2_PID 0xF44C /* Linx future device */
+#define LINX_MASTERDEVEL2_PID 0xF449 /* Linx Master Development 2.0 */
+#define LINX_FUTURE_0_PID 0xF44A /* Linx future device */
+#define LINX_FUTURE_1_PID 0xF44B /* Linx future device */
+#define LINX_FUTURE_2_PID 0xF44C /* Linx future device */
/*
* Oceanic product ids
@@ -494,6 +494,13 @@
#define RATOC_PRODUCT_ID_USB60F 0xb020
/*
+ * Contec products (http://www.contec.com)
+ * Submitted by Daniel Sangorrin
+ */
+#define CONTEC_VID 0x06CE /* Vendor ID */
+#define CONTEC_COM1USBH_PID 0x8311 /* COM-1(USB)H */
+
+/*
* Definitions for B&B Electronics products.
*/
#define BANDB_VID 0x0856 /* B&B Electronics Vendor ID */
@@ -642,7 +649,7 @@
#define FALCOM_TWIST_PID 0x0001 /* Falcom Twist USB GPRS modem */
#define FALCOM_SAMBA_PID 0x0005 /* Falcom Samba USB GPRS modem */
-/* Larsen and Brusgaard AltiTrack/USBtrack */
+/* Larsen and Brusgaard AltiTrack/USBtrack */
#define LARSENBRUSGAARD_VID 0x0FD8
#define LB_ALTITRACK_PID 0x0001
@@ -971,7 +978,7 @@
#define ALTI2_N3_PID 0x6001 /* Neptune 3 */
/*
- * Dresden Elektronic Sensor Terminal Board
+ * Dresden Elektronik Sensor Terminal Board
*/
#define DE_VID 0x1cf1 /* Vendor ID */
#define STB_PID 0x0001 /* Sensor Terminal Board */
@@ -1002,3 +1009,11 @@
#define EVO_8U232AM_PID 0x02FF /* Evolution robotics RCM2 (FT232AM)*/
#define EVO_HYBRID_PID 0x0302 /* Evolution robotics RCM4 PID (FT232BM)*/
#define EVO_RCM4_PID 0x0303 /* Evolution robotics RCM4 PID */
+
+/*
+ * MJS Gadgets HD Radio / XM Radio / Sirius Radio interfaces (using VID 0x0403)
+ */
+#define MJSG_GENERIC_PID 0x9378
+#define MJSG_SR_RADIO_PID 0x9379
+#define MJSG_XM_RADIO_PID 0x937A
+#define MJSG_HD_RADIO_PID 0x937C
diff --git a/drivers/usb/serial/funsoft.c b/drivers/usb/serial/funsoft.c
index d30f736d2cc5..e21ce9ddfc63 100644
--- a/drivers/usb/serial/funsoft.c
+++ b/drivers/usb/serial/funsoft.c
@@ -18,7 +18,7 @@
static int debug;
-static struct usb_device_id id_table [] = {
+static const struct usb_device_id id_table[] = {
{ USB_DEVICE(0x1404, 0xcddc) },
{ },
};
diff --git a/drivers/usb/serial/garmin_gps.c b/drivers/usb/serial/garmin_gps.c
index 5ac900e5a50e..a42b29a695b2 100644
--- a/drivers/usb/serial/garmin_gps.c
+++ b/drivers/usb/serial/garmin_gps.c
@@ -210,7 +210,7 @@ static unsigned char const PRIVATE_REQ[]
-static struct usb_device_id id_table [] = {
+static const struct usb_device_id id_table[] = {
/* the same device id seems to be used by all
usb enabled GPS devices */
{ USB_DEVICE(GARMIN_VENDOR_ID, 3) },
@@ -271,7 +271,6 @@ static void send_to_tty(struct usb_serial_port *port,
usb_serial_debug_data(debug, &port->dev,
__func__, actual_length, data);
- tty_buffer_request_room(tty, actual_length);
tty_insert_flip_string(tty, data, actual_length);
tty_flip_buffer_push(tty);
}
diff --git a/drivers/usb/serial/generic.c b/drivers/usb/serial/generic.c
index 83443d6306d6..89fac36684c5 100644
--- a/drivers/usb/serial/generic.c
+++ b/drivers/usb/serial/generic.c
@@ -20,6 +20,7 @@
#include <linux/usb/serial.h>
#include <linux/uaccess.h>
#include <linux/kfifo.h>
+#include <linux/serial.h>
static int debug;
@@ -41,7 +42,7 @@ static struct usb_device_id generic_device_ids[2]; /* Initially all zeroes. */
/* we want to look at all devices, as the vendor/product id can change
* depending on the command line argument */
-static struct usb_device_id generic_serial_ids[] = {
+static const struct usb_device_id generic_serial_ids[] = {
{.driver_info = 42},
{}
};
@@ -194,7 +195,7 @@ static int usb_serial_multi_urb_write(struct tty_struct *tty,
if (port->urbs_in_flight >
port->serial->type->max_in_flight_urbs) {
spin_unlock_irqrestore(&port->lock, flags);
- dbg("%s - write limit hit\n", __func__);
+ dbg("%s - write limit hit", __func__);
return bwrite;
}
port->tx_bytes_flight += towrite;
@@ -585,7 +586,7 @@ int usb_serial_generic_resume(struct usb_serial *serial)
for (i = 0; i < serial->num_ports; i++) {
port = serial->port[i];
- if (!port->port.count)
+ if (!test_bit(ASYNCB_INITIALIZED, &port->port.flags))
continue;
if (port->read_urb) {
diff --git a/drivers/usb/serial/hp4x.c b/drivers/usb/serial/hp4x.c
index 431329275133..809379159b0e 100644
--- a/drivers/usb/serial/hp4x.c
+++ b/drivers/usb/serial/hp4x.c
@@ -29,7 +29,7 @@
#define HP_VENDOR_ID 0x03f0
#define HP49GP_PRODUCT_ID 0x0121
-static struct usb_device_id id_table [] = {
+static const struct usb_device_id id_table[] = {
{ USB_DEVICE(HP_VENDOR_ID, HP49GP_PRODUCT_ID) },
{ } /* Terminating entry */
};
diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c
index b97960ac92f2..3ef8df0ef888 100644
--- a/drivers/usb/serial/io_edgeport.c
+++ b/drivers/usb/serial/io_edgeport.c
@@ -364,42 +364,6 @@ static void update_edgeport_E2PROM(struct edgeport_serial *edge_serial)
release_firmware(fw);
}
-
-/************************************************************************
- * *
- * Get string descriptor from device *
- * *
- ************************************************************************/
-static int get_string(struct usb_device *dev, int Id, char *string, int buflen)
-{
- struct usb_string_descriptor StringDesc;
- struct usb_string_descriptor *pStringDesc;
-
- dbg("%s - USB String ID = %d", __func__, Id);
-
- if (!usb_get_descriptor(dev, USB_DT_STRING, Id,
- &StringDesc, sizeof(StringDesc)))
- return 0;
-
- pStringDesc = kmalloc(StringDesc.bLength, GFP_KERNEL);
- if (!pStringDesc)
- return 0;
-
- if (!usb_get_descriptor(dev, USB_DT_STRING, Id,
- pStringDesc, StringDesc.bLength)) {
- kfree(pStringDesc);
- return 0;
- }
-
- unicode_to_ascii(string, buflen,
- pStringDesc->wData, pStringDesc->bLength/2);
-
- kfree(pStringDesc);
- dbg("%s - USB String %s", __func__, string);
- return strlen(string);
-}
-
-
#if 0
/************************************************************************
*
@@ -2007,7 +1971,7 @@ static void process_rcvd_status(struct edgeport_serial *edge_serial,
return;
case IOSP_EXT_STATUS_RX_CHECK_RSP:
- dbg("%s ========== Port %u CHECK_RSP Sequence = %02x =============\n", __func__, edge_serial->rxPort, byte3);
+ dbg("%s ========== Port %u CHECK_RSP Sequence = %02x =============", __func__, edge_serial->rxPort, byte3);
/* Port->RxCheckRsp = true; */
return;
}
@@ -2075,7 +2039,7 @@ static void process_rcvd_status(struct edgeport_serial *edge_serial,
break;
default:
- dbg("%s - Unrecognized IOSP status code %u\n", __func__, code);
+ dbg("%s - Unrecognized IOSP status code %u", __func__, code);
break;
}
return;
@@ -2091,18 +2055,13 @@ static void edge_tty_recv(struct device *dev, struct tty_struct *tty,
{
int cnt;
- do {
- cnt = tty_buffer_request_room(tty, length);
- if (cnt < length) {
- dev_err(dev, "%s - dropping data, %d bytes lost\n",
- __func__, length - cnt);
- if (cnt == 0)
- break;
- }
- tty_insert_flip_string(tty, data, cnt);
- data += cnt;
- length -= cnt;
- } while (length > 0);
+ cnt = tty_insert_flip_string(tty, data, length);
+ if (cnt < length) {
+ dev_err(dev, "%s - dropping data, %d bytes lost\n",
+ __func__, length - cnt);
+ }
+ data += cnt;
+ length -= cnt;
tty_flip_buffer_push(tty);
}
@@ -2530,7 +2489,7 @@ static int calc_baud_rate_divisor(int baudrate, int *divisor)
*divisor = custom;
- dbg("%s - Baud %d = %d\n", __func__, baudrate, custom);
+ dbg("%s - Baud %d = %d", __func__, baudrate, custom);
return 0;
}
@@ -2915,7 +2874,7 @@ static void load_application_firmware(struct edgeport_serial *edge_serial)
break;
case EDGE_DOWNLOAD_FILE_NONE:
- dbg ("No download file specified, skipping download\n");
+ dbg("No download file specified, skipping download");
return;
default:
@@ -2997,10 +2956,12 @@ static int edge_startup(struct usb_serial *serial)
usb_set_serial_data(serial, edge_serial);
/* get the name for the device from the device */
- i = get_string(dev, dev->descriptor.iManufacturer,
+ i = usb_string(dev, dev->descriptor.iManufacturer,
&edge_serial->name[0], MAX_NAME_LEN+1);
+ if (i < 0)
+ i = 0;
edge_serial->name[i++] = ' ';
- get_string(dev, dev->descriptor.iProduct,
+ usb_string(dev, dev->descriptor.iProduct,
&edge_serial->name[i], MAX_NAME_LEN+2 - i);
dev_info(&serial->dev->dev, "%s detected\n", edge_serial->name);
diff --git a/drivers/usb/serial/io_tables.h b/drivers/usb/serial/io_tables.h
index 9241d3147513..feb56a4ca799 100644
--- a/drivers/usb/serial/io_tables.h
+++ b/drivers/usb/serial/io_tables.h
@@ -14,7 +14,7 @@
#ifndef IO_TABLES_H
#define IO_TABLES_H
-static struct usb_device_id edgeport_2port_id_table [] = {
+static const struct usb_device_id edgeport_2port_id_table[] = {
{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_2) },
{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_2I) },
{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_421) },
@@ -23,7 +23,7 @@ static struct usb_device_id edgeport_2port_id_table [] = {
{ }
};
-static struct usb_device_id edgeport_4port_id_table [] = {
+static const struct usb_device_id edgeport_4port_id_table[] = {
{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_4) },
{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_RAPIDPORT_4) },
{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_4T) },
@@ -37,7 +37,7 @@ static struct usb_device_id edgeport_4port_id_table [] = {
{ }
};
-static struct usb_device_id edgeport_8port_id_table [] = {
+static const struct usb_device_id edgeport_8port_id_table[] = {
{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_8) },
{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_16_DUAL_CPU) },
{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_8I) },
@@ -47,7 +47,7 @@ static struct usb_device_id edgeport_8port_id_table [] = {
{ }
};
-static struct usb_device_id Epic_port_id_table [] = {
+static const struct usb_device_id Epic_port_id_table[] = {
{ USB_DEVICE(USB_VENDOR_ID_NCR, NCR_DEVICE_ID_EPIC_0202) },
{ USB_DEVICE(USB_VENDOR_ID_NCR, NCR_DEVICE_ID_EPIC_0203) },
{ USB_DEVICE(USB_VENDOR_ID_NCR, NCR_DEVICE_ID_EPIC_0310) },
@@ -60,7 +60,7 @@ static struct usb_device_id Epic_port_id_table [] = {
};
/* Devices that this driver supports */
-static struct usb_device_id id_table_combined [] = {
+static const struct usb_device_id id_table_combined[] = {
{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_4) },
{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_RAPIDPORT_4) },
{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_4T) },
diff --git a/drivers/usb/serial/io_ti.c b/drivers/usb/serial/io_ti.c
index d4cc0f7af400..aa876f71f228 100644
--- a/drivers/usb/serial/io_ti.c
+++ b/drivers/usb/serial/io_ti.c
@@ -134,7 +134,7 @@ struct edgeport_serial {
/* Devices that this driver supports */
-static struct usb_device_id edgeport_1port_id_table [] = {
+static const struct usb_device_id edgeport_1port_id_table[] = {
{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_1) },
{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_TI3410_EDGEPORT_1) },
{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_TI3410_EDGEPORT_1I) },
@@ -154,7 +154,7 @@ static struct usb_device_id edgeport_1port_id_table [] = {
{ }
};
-static struct usb_device_id edgeport_2port_id_table [] = {
+static const struct usb_device_id edgeport_2port_id_table[] = {
{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_2) },
{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_2C) },
{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_2I) },
@@ -177,7 +177,7 @@ static struct usb_device_id edgeport_2port_id_table [] = {
};
/* Devices that this driver supports */
-static struct usb_device_id id_table_combined [] = {
+static const struct usb_device_id id_table_combined[] = {
{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_1) },
{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_TI3410_EDGEPORT_1) },
{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_TI3410_EDGEPORT_1I) },
@@ -413,11 +413,18 @@ static int write_boot_mem(struct edgeport_serial *serial,
{
int status = 0;
int i;
- __u8 temp;
+ u8 *temp;
/* Must do a read before write */
if (!serial->TiReadI2C) {
- status = read_boot_mem(serial, 0, 1, &temp);
+ temp = kmalloc(1, GFP_KERNEL);
+ if (!temp) {
+ dev_err(&serial->serial->dev->dev,
+ "%s - out of memory\n", __func__);
+ return -ENOMEM;
+ }
+ status = read_boot_mem(serial, 0, 1, temp);
+ kfree(temp);
if (status)
return status;
}
@@ -935,37 +942,47 @@ static int build_i2c_fw_hdr(__u8 *header, struct device *dev)
static int i2c_type_bootmode(struct edgeport_serial *serial)
{
int status;
- __u8 data;
+ u8 *data;
+
+ data = kmalloc(1, GFP_KERNEL);
+ if (!data) {
+ dev_err(&serial->serial->dev->dev,
+ "%s - out of memory\n", __func__);
+ return -ENOMEM;
+ }
/* Try to read type 2 */
status = ti_vread_sync(serial->serial->dev, UMPC_MEMORY_READ,
- DTK_ADDR_SPACE_I2C_TYPE_II, 0, &data, 0x01);
+ DTK_ADDR_SPACE_I2C_TYPE_II, 0, data, 0x01);
if (status)
dbg("%s - read 2 status error = %d", __func__, status);
else
- dbg("%s - read 2 data = 0x%x", __func__, data);
- if ((!status) && (data == UMP5152 || data == UMP3410)) {
+ dbg("%s - read 2 data = 0x%x", __func__, *data);
+ if ((!status) && (*data == UMP5152 || *data == UMP3410)) {
dbg("%s - ROM_TYPE_II", __func__);
serial->TI_I2C_Type = DTK_ADDR_SPACE_I2C_TYPE_II;
- return 0;
+ goto out;
}
/* Try to read type 3 */
status = ti_vread_sync(serial->serial->dev, UMPC_MEMORY_READ,
- DTK_ADDR_SPACE_I2C_TYPE_III, 0, &data, 0x01);
+ DTK_ADDR_SPACE_I2C_TYPE_III, 0, data, 0x01);
if (status)
dbg("%s - read 3 status error = %d", __func__, status);
else
- dbg("%s - read 2 data = 0x%x", __func__, data);
- if ((!status) && (data == UMP5152 || data == UMP3410)) {
+ dbg("%s - read 2 data = 0x%x", __func__, *data);
+ if ((!status) && (*data == UMP5152 || *data == UMP3410)) {
dbg("%s - ROM_TYPE_III", __func__);
serial->TI_I2C_Type = DTK_ADDR_SPACE_I2C_TYPE_III;
- return 0;
+ goto out;
}
dbg("%s - Unknown", __func__);
serial->TI_I2C_Type = DTK_ADDR_SPACE_I2C_TYPE_II;
- return -ENODEV;
+ status = -ENODEV;
+out:
+ kfree(data);
+ return status;
}
static int bulk_xfer(struct usb_serial *serial, void *buffer,
@@ -1113,7 +1130,7 @@ static int download_fw(struct edgeport_serial *serial)
I2C_DESC_TYPE_FIRMWARE_BASIC, rom_desc);
if (start_address != 0) {
struct ti_i2c_firmware_rec *firmware_version;
- __u8 record;
+ u8 *record;
dbg("%s - Found Type FIRMWARE (Type 2) record",
__func__);
@@ -1165,6 +1182,15 @@ static int download_fw(struct edgeport_serial *serial)
OperationalMajorVersion,
OperationalMinorVersion);
+ record = kmalloc(1, GFP_KERNEL);
+ if (!record) {
+ dev_err(dev, "%s - out of memory.\n",
+ __func__);
+ kfree(firmware_version);
+ kfree(rom_desc);
+ kfree(ti_manuf_desc);
+ return -ENOMEM;
+ }
/* In order to update the I2C firmware we must
* change the type 2 record to type 0xF2. This
* will force the UMP to come up in Boot Mode.
@@ -1177,13 +1203,14 @@ static int download_fw(struct edgeport_serial *serial)
* firmware will update the record type from
* 0xf2 to 0x02.
*/
- record = I2C_DESC_TYPE_FIRMWARE_BLANK;
+ *record = I2C_DESC_TYPE_FIRMWARE_BLANK;
/* Change the I2C Firmware record type to
0xf2 to trigger an update */
status = write_rom(serial, start_address,
- sizeof(record), &record);
+ sizeof(*record), record);
if (status) {
+ kfree(record);
kfree(firmware_version);
kfree(rom_desc);
kfree(ti_manuf_desc);
@@ -1196,19 +1223,21 @@ static int download_fw(struct edgeport_serial *serial)
*/
status = read_rom(serial,
start_address,
- sizeof(record),
- &record);
+ sizeof(*record),
+ record);
if (status) {
+ kfree(record);
kfree(firmware_version);
kfree(rom_desc);
kfree(ti_manuf_desc);
return status;
}
- if (record != I2C_DESC_TYPE_FIRMWARE_BLANK) {
+ if (*record != I2C_DESC_TYPE_FIRMWARE_BLANK) {
dev_err(dev,
"%s - error resetting device\n",
__func__);
+ kfree(record);
kfree(firmware_version);
kfree(rom_desc);
kfree(ti_manuf_desc);
@@ -1226,6 +1255,7 @@ static int download_fw(struct edgeport_serial *serial)
__func__, status);
/* return an error on purpose. */
+ kfree(record);
kfree(firmware_version);
kfree(rom_desc);
kfree(ti_manuf_desc);
@@ -1686,7 +1716,7 @@ static void edge_interrupt_callback(struct urb *urb)
case TIUMP_INTERRUPT_CODE_MSR: /* MSR */
/* Copy MSR from UMP */
msr = data[1];
- dbg("%s - ===== Port %u MSR Status = %02x ======\n",
+ dbg("%s - ===== Port %u MSR Status = %02x ======",
__func__, port_number, msr);
handle_new_msr(edge_port, msr);
break;
@@ -1790,7 +1820,6 @@ static void edge_tty_recv(struct device *dev, struct tty_struct *tty,
{
int queued;
- tty_buffer_request_room(tty, length);
queued = tty_insert_flip_string(tty, data, length);
if (queued < length)
dev_err(dev, "%s - dropping data, %d bytes lost\n",
diff --git a/drivers/usb/serial/ipaq.c b/drivers/usb/serial/ipaq.c
index d6231c38813e..3fea9298eb15 100644
--- a/drivers/usb/serial/ipaq.c
+++ b/drivers/usb/serial/ipaq.c
@@ -747,7 +747,6 @@ static void ipaq_read_bulk_callback(struct urb *urb)
tty = tty_port_tty_get(&port->port);
if (tty && urb->actual_length) {
- tty_buffer_request_room(tty, urb->actual_length);
tty_insert_flip_string(tty, data, urb->actual_length);
tty_flip_buffer_push(tty);
bytes_in += urb->actual_length;
diff --git a/drivers/usb/serial/ipw.c b/drivers/usb/serial/ipw.c
index 727d323f092a..e1d07840cee6 100644
--- a/drivers/usb/serial/ipw.c
+++ b/drivers/usb/serial/ipw.c
@@ -134,7 +134,7 @@ enum {
#define IPW_WANTS_TO_SEND 0x30
-static struct usb_device_id usb_ipw_ids[] = {
+static const struct usb_device_id usb_ipw_ids[] = {
{ USB_DEVICE(IPW_VID, IPW_PID) },
{ },
};
@@ -172,7 +172,6 @@ static void ipw_read_bulk_callback(struct urb *urb)
tty = tty_port_tty_get(&port->port);
if (tty && urb->actual_length) {
- tty_buffer_request_room(tty, urb->actual_length);
tty_insert_flip_string(tty, data, urb->actual_length);
tty_flip_buffer_push(tty);
}
diff --git a/drivers/usb/serial/ir-usb.c b/drivers/usb/serial/ir-usb.c
index 95d8d26b9a44..4a0f51974232 100644
--- a/drivers/usb/serial/ir-usb.c
+++ b/drivers/usb/serial/ir-usb.c
@@ -100,7 +100,7 @@ static u8 ir_baud;
static u8 ir_xbof;
static u8 ir_add_bof;
-static struct usb_device_id ir_id_table[] = {
+static const struct usb_device_id ir_id_table[] = {
{ USB_DEVICE(0x050f, 0x0180) }, /* KC Technology, KC-180 */
{ USB_DEVICE(0x08e9, 0x0100) }, /* XTNDAccess */
{ USB_DEVICE(0x09c4, 0x0011) }, /* ACTiSys ACT-IR2000U */
@@ -445,11 +445,6 @@ static void ir_read_bulk_callback(struct urb *urb)
dbg("%s - port %d", __func__, port->number);
- if (!port->port.count) {
- dbg("%s - port closed.", __func__);
- return;
- }
-
switch (status) {
case 0: /* Successful */
/*
@@ -462,10 +457,8 @@ static void ir_read_bulk_callback(struct urb *urb)
usb_serial_debug_data(debug, &port->dev, __func__,
urb->actual_length, data);
tty = tty_port_tty_get(&port->port);
- if (tty_buffer_request_room(tty, urb->actual_length - 1)) {
- tty_insert_flip_string(tty, data+1, urb->actual_length - 1);
- tty_flip_buffer_push(tty);
- }
+ tty_insert_flip_string(tty, data+1, urb->actual_length - 1);
+ tty_flip_buffer_push(tty);
tty_kref_put(tty);
/*
diff --git a/drivers/usb/serial/iuu_phoenix.c b/drivers/usb/serial/iuu_phoenix.c
index e6e02b178d2b..43f13cf2f016 100644
--- a/drivers/usb/serial/iuu_phoenix.c
+++ b/drivers/usb/serial/iuu_phoenix.c
@@ -43,7 +43,7 @@ static int debug;
#define DRIVER_VERSION "v0.11"
#define DRIVER_DESC "Infinity USB Unlimited Phoenix driver"
-static struct usb_device_id id_table[] = {
+static const struct usb_device_id id_table[] = {
{USB_DEVICE(IUU_USB_VENDOR_ID, IUU_USB_PRODUCT_ID)},
{} /* Terminating entry */
};
diff --git a/drivers/usb/serial/keyspan.c b/drivers/usb/serial/keyspan.c
index f8c4b07033ff..297163c3c610 100644
--- a/drivers/usb/serial/keyspan.c
+++ b/drivers/usb/serial/keyspan.c
@@ -464,13 +464,9 @@ static void usa26_indat_callback(struct urb *urb)
/* Resubmit urb so we continue receiving */
urb->dev = port->serial->dev;
- if (port->port.count) {
- err = usb_submit_urb(urb, GFP_ATOMIC);
- if (err != 0)
- dbg("%s - resubmit read urb failed. (%d)",
- __func__, err);
- }
- return;
+ err = usb_submit_urb(urb, GFP_ATOMIC);
+ if (err != 0)
+ dbg("%s - resubmit read urb failed. (%d)", __func__, err);
}
/* Outdat handling is common for all devices */
@@ -483,8 +479,7 @@ static void usa2x_outdat_callback(struct urb *urb)
p_priv = usb_get_serial_port_data(port);
dbg("%s - urb %d", __func__, urb == p_priv->out_urbs[1]);
- if (port->port.count)
- usb_serial_port_softint(port);
+ usb_serial_port_softint(port);
}
static void usa26_inack_callback(struct urb *urb)
@@ -615,12 +610,10 @@ static void usa28_indat_callback(struct urb *urb)
/* Resubmit urb so we continue receiving */
urb->dev = port->serial->dev;
- if (port->port.count) {
- err = usb_submit_urb(urb, GFP_ATOMIC);
- if (err != 0)
- dbg("%s - resubmit read urb failed. (%d)",
- __func__, err);
- }
+ err = usb_submit_urb(urb, GFP_ATOMIC);
+ if (err != 0)
+ dbg("%s - resubmit read urb failed. (%d)",
+ __func__, err);
p_priv->in_flip ^= 1;
urb = p_priv->in_urbs[p_priv->in_flip];
@@ -856,12 +849,9 @@ static void usa49_indat_callback(struct urb *urb)
/* Resubmit urb so we continue receiving */
urb->dev = port->serial->dev;
- if (port->port.count) {
- err = usb_submit_urb(urb, GFP_ATOMIC);
- if (err != 0)
- dbg("%s - resubmit read urb failed. (%d)",
- __func__, err);
- }
+ err = usb_submit_urb(urb, GFP_ATOMIC);
+ if (err != 0)
+ dbg("%s - resubmit read urb failed. (%d)", __func__, err);
}
static void usa49wg_indat_callback(struct urb *urb)
@@ -904,11 +894,7 @@ static void usa49wg_indat_callback(struct urb *urb)
/* no error on any byte */
i++;
for (x = 1; x < len ; ++x)
- if (port->port.count)
- tty_insert_flip_char(tty,
- data[i++], 0);
- else
- i++;
+ tty_insert_flip_char(tty, data[i++], 0);
} else {
/*
* some bytes had errors, every byte has status
@@ -922,14 +908,12 @@ static void usa49wg_indat_callback(struct urb *urb)
if (stat & RXERROR_PARITY)
flag |= TTY_PARITY;
/* XXX should handle break (0x10) */
- if (port->port.count)
- tty_insert_flip_char(tty,
+ tty_insert_flip_char(tty,
data[i+1], flag);
i += 2;
}
}
- if (port->port.count)
- tty_flip_buffer_push(tty);
+ tty_flip_buffer_push(tty);
tty_kref_put(tty);
}
}
@@ -1013,13 +997,9 @@ static void usa90_indat_callback(struct urb *urb)
/* Resubmit urb so we continue receiving */
urb->dev = port->serial->dev;
- if (port->port.count) {
- err = usb_submit_urb(urb, GFP_ATOMIC);
- if (err != 0)
- dbg("%s - resubmit read urb failed. (%d)",
- __func__, err);
- }
- return;
+ err = usb_submit_urb(urb, GFP_ATOMIC);
+ if (err != 0)
+ dbg("%s - resubmit read urb failed. (%d)", __func__, err);
}
@@ -2418,8 +2398,7 @@ static int keyspan_usa90_send_setup(struct usb_serial *serial,
msg.portEnabled = 0;
/* Sending intermediate configs */
else {
- if (port->port.count)
- msg.portEnabled = 1;
+ msg.portEnabled = 1;
msg.txBreak = (p_priv->break_on);
}
diff --git a/drivers/usb/serial/keyspan.h b/drivers/usb/serial/keyspan.h
index 30771e5b3973..bf3297ddd186 100644
--- a/drivers/usb/serial/keyspan.h
+++ b/drivers/usb/serial/keyspan.h
@@ -456,7 +456,7 @@ static const struct keyspan_device_details *keyspan_devices[] = {
NULL,
};
-static struct usb_device_id keyspan_ids_combined[] = {
+static const struct usb_device_id keyspan_ids_combined[] = {
{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa18x_pre_product_id) },
{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19_pre_product_id) },
{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19w_pre_product_id) },
@@ -497,7 +497,7 @@ static struct usb_driver keyspan_driver = {
};
/* usb_device_id table for the pre-firmware download keyspan devices */
-static struct usb_device_id keyspan_pre_ids[] = {
+static const struct usb_device_id keyspan_pre_ids[] = {
{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa18x_pre_product_id) },
{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19_pre_product_id) },
{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19qi_pre_product_id) },
@@ -513,7 +513,7 @@ static struct usb_device_id keyspan_pre_ids[] = {
{ } /* Terminating entry */
};
-static struct usb_device_id keyspan_1port_ids[] = {
+static const struct usb_device_id keyspan_1port_ids[] = {
{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa18x_product_id) },
{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19_product_id) },
{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19qi_product_id) },
@@ -524,7 +524,7 @@ static struct usb_device_id keyspan_1port_ids[] = {
{ } /* Terminating entry */
};
-static struct usb_device_id keyspan_2port_ids[] = {
+static const struct usb_device_id keyspan_2port_ids[] = {
{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28_product_id) },
{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28x_product_id) },
{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28xa_product_id) },
@@ -532,7 +532,7 @@ static struct usb_device_id keyspan_2port_ids[] = {
{ } /* Terminating entry */
};
-static struct usb_device_id keyspan_4port_ids[] = {
+static const struct usb_device_id keyspan_4port_ids[] = {
{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa49w_product_id) },
{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa49wlc_product_id)},
{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa49wg_product_id)},
diff --git a/drivers/usb/serial/keyspan_pda.c b/drivers/usb/serial/keyspan_pda.c
index 84f08e968e0b..185fe9a7d4e0 100644
--- a/drivers/usb/serial/keyspan_pda.c
+++ b/drivers/usb/serial/keyspan_pda.c
@@ -125,7 +125,7 @@ struct keyspan_pda_private {
#define ENTREGRA_VENDOR_ID 0x1645
#define ENTREGRA_FAKE_ID 0x8093
-static struct usb_device_id id_table_combined [] = {
+static const struct usb_device_id id_table_combined[] = {
#ifdef KEYSPAN
{ USB_DEVICE(KEYSPAN_VENDOR_ID, KEYSPAN_PDA_FAKE_ID) },
#endif
@@ -147,20 +147,20 @@ static struct usb_driver keyspan_pda_driver = {
.no_dynamic_id = 1,
};
-static struct usb_device_id id_table_std [] = {
+static const struct usb_device_id id_table_std[] = {
{ USB_DEVICE(KEYSPAN_VENDOR_ID, KEYSPAN_PDA_ID) },
{ } /* Terminating entry */
};
#ifdef KEYSPAN
-static struct usb_device_id id_table_fake [] = {
+static const struct usb_device_id id_table_fake[] = {
{ USB_DEVICE(KEYSPAN_VENDOR_ID, KEYSPAN_PDA_FAKE_ID) },
{ } /* Terminating entry */
};
#endif
#ifdef XIRCOM
-static struct usb_device_id id_table_fake_xircom [] = {
+static const struct usb_device_id id_table_fake_xircom[] = {
{ USB_DEVICE(XIRCOM_VENDOR_ID, XIRCOM_FAKE_ID) },
{ USB_DEVICE(ENTREGRA_VENDOR_ID, ENTREGRA_FAKE_ID) },
{ }
@@ -429,13 +429,20 @@ static int keyspan_pda_get_modem_info(struct usb_serial *serial,
unsigned char *value)
{
int rc;
- unsigned char data;
+ u8 *data;
+
+ data = kmalloc(1, GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
rc = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
3, /* get pins */
USB_TYPE_VENDOR|USB_RECIP_INTERFACE|USB_DIR_IN,
- 0, 0, &data, 1, 2000);
+ 0, 0, data, 1, 2000);
if (rc >= 0)
- *value = data;
+ *value = *data;
+
+ kfree(data);
return rc;
}
@@ -543,7 +550,14 @@ static int keyspan_pda_write(struct tty_struct *tty,
device how much room it really has. This is done only on
scheduler time, since usb_control_msg() sleeps. */
if (count > priv->tx_room && !in_interrupt()) {
- unsigned char room;
+ u8 *room;
+
+ room = kmalloc(1, GFP_KERNEL);
+ if (!room) {
+ rc = -ENOMEM;
+ goto exit;
+ }
+
rc = usb_control_msg(serial->dev,
usb_rcvctrlpipe(serial->dev, 0),
6, /* write_room */
@@ -551,9 +565,14 @@ static int keyspan_pda_write(struct tty_struct *tty,
| USB_DIR_IN,
0, /* value: 0 means "remaining room" */
0, /* index */
- &room,
+ room,
1,
2000);
+ if (rc > 0) {
+ dbg(" roomquery says %d", *room);
+ priv->tx_room = *room;
+ }
+ kfree(room);
if (rc < 0) {
dbg(" roomquery failed");
goto exit;
@@ -563,8 +582,6 @@ static int keyspan_pda_write(struct tty_struct *tty,
rc = -EIO; /* device didn't return any data */
goto exit;
}
- dbg(" roomquery says %d", room);
- priv->tx_room = room;
}
if (count > priv->tx_room) {
/* we're about to completely fill the Tx buffer, so
@@ -684,18 +701,22 @@ static int keyspan_pda_open(struct tty_struct *tty,
struct usb_serial_port *port)
{
struct usb_serial *serial = port->serial;
- unsigned char room;
+ u8 *room;
int rc = 0;
struct keyspan_pda_private *priv;
/* find out how much room is in the Tx ring */
+ room = kmalloc(1, GFP_KERNEL);
+ if (!room)
+ return -ENOMEM;
+
rc = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
6, /* write_room */
USB_TYPE_VENDOR | USB_RECIP_INTERFACE
| USB_DIR_IN,
0, /* value */
0, /* index */
- &room,
+ room,
1,
2000);
if (rc < 0) {
@@ -708,8 +729,8 @@ static int keyspan_pda_open(struct tty_struct *tty,
goto error;
}
priv = usb_get_serial_port_data(port);
- priv->tx_room = room;
- priv->tx_throttled = room ? 0 : 1;
+ priv->tx_room = *room;
+ priv->tx_throttled = *room ? 0 : 1;
/*Start reading from the device*/
port->interrupt_in_urb->dev = serial->dev;
@@ -718,8 +739,8 @@ static int keyspan_pda_open(struct tty_struct *tty,
dbg("%s - usb_submit_urb(read int) failed", __func__);
goto error;
}
-
error:
+ kfree(room);
return rc;
}
static void keyspan_pda_close(struct usb_serial_port *port)
diff --git a/drivers/usb/serial/kl5kusb105.c b/drivers/usb/serial/kl5kusb105.c
index 3a7873806f46..8eef91ba4b1c 100644
--- a/drivers/usb/serial/kl5kusb105.c
+++ b/drivers/usb/serial/kl5kusb105.c
@@ -94,7 +94,7 @@ static int klsi_105_tiocmset(struct tty_struct *tty, struct file *file,
/*
* All of the device info needed for the KLSI converters.
*/
-static struct usb_device_id id_table [] = {
+static const struct usb_device_id id_table[] = {
{ USB_DEVICE(PALMCONNECT_VID, PALMCONNECT_PID) },
{ USB_DEVICE(KLSI_VID, KLSI_KL5KUSB105D_PID) },
{ } /* Terminating entry */
@@ -212,10 +212,19 @@ static int klsi_105_get_line_state(struct usb_serial_port *port,
unsigned long *line_state_p)
{
int rc;
- __u8 status_buf[KLSI_STATUSBUF_LEN] = { -1, -1};
+ u8 *status_buf;
__u16 status;
dev_info(&port->serial->dev->dev, "sending SIO Poll request\n");
+
+ status_buf = kmalloc(KLSI_STATUSBUF_LEN, GFP_KERNEL);
+ if (!status_buf) {
+ dev_err(&port->dev, "%s - out of memory for status buffer.\n",
+ __func__);
+ return -ENOMEM;
+ }
+ status_buf[0] = 0xff;
+ status_buf[1] = 0xff;
rc = usb_control_msg(port->serial->dev,
usb_rcvctrlpipe(port->serial->dev, 0),
KL5KUSB105A_SIO_POLL,
@@ -236,6 +245,8 @@ static int klsi_105_get_line_state(struct usb_serial_port *port,
*line_state_p = klsi_105_status2linestate(status);
}
+
+ kfree(status_buf);
return rc;
}
@@ -364,7 +375,7 @@ static int klsi_105_open(struct tty_struct *tty, struct usb_serial_port *port)
int rc;
int i;
unsigned long line_state;
- struct klsi_105_port_settings cfg;
+ struct klsi_105_port_settings *cfg;
unsigned long flags;
dbg("%s port %d", __func__, port->number);
@@ -376,12 +387,18 @@ static int klsi_105_open(struct tty_struct *tty, struct usb_serial_port *port)
* Then read the modem line control and store values in
* priv->line_state.
*/
- cfg.pktlen = 5;
- cfg.baudrate = kl5kusb105a_sio_b9600;
- cfg.databits = kl5kusb105a_dtb_8;
- cfg.unknown1 = 0;
- cfg.unknown2 = 1;
- klsi_105_chg_port_settings(port, &cfg);
+ cfg = kmalloc(sizeof(*cfg), GFP_KERNEL);
+ if (!cfg) {
+ dev_err(&port->dev, "%s - out of memory for config buffer.\n",
+ __func__);
+ return -ENOMEM;
+ }
+ cfg->pktlen = 5;
+ cfg->baudrate = kl5kusb105a_sio_b9600;
+ cfg->databits = kl5kusb105a_dtb_8;
+ cfg->unknown1 = 0;
+ cfg->unknown2 = 1;
+ klsi_105_chg_port_settings(port, cfg);
/* set up termios structure */
spin_lock_irqsave(&priv->lock, flags);
@@ -391,11 +408,11 @@ static int klsi_105_open(struct tty_struct *tty, struct usb_serial_port *port)
priv->termios.c_lflag = tty->termios->c_lflag;
for (i = 0; i < NCCS; i++)
priv->termios.c_cc[i] = tty->termios->c_cc[i];
- priv->cfg.pktlen = cfg.pktlen;
- priv->cfg.baudrate = cfg.baudrate;
- priv->cfg.databits = cfg.databits;
- priv->cfg.unknown1 = cfg.unknown1;
- priv->cfg.unknown2 = cfg.unknown2;
+ priv->cfg.pktlen = cfg->pktlen;
+ priv->cfg.baudrate = cfg->baudrate;
+ priv->cfg.databits = cfg->databits;
+ priv->cfg.unknown1 = cfg->unknown1;
+ priv->cfg.unknown2 = cfg->unknown2;
spin_unlock_irqrestore(&priv->lock, flags);
/* READ_ON and urb submission */
@@ -441,6 +458,7 @@ static int klsi_105_open(struct tty_struct *tty, struct usb_serial_port *port)
retval = rc;
exit:
+ kfree(cfg);
return retval;
} /* klsi_105_open */
@@ -681,7 +699,6 @@ static void klsi_105_read_bulk_callback(struct urb *urb)
bytes_sent = urb->actual_length - 2;
}
- tty_buffer_request_room(tty, bytes_sent);
tty_insert_flip_string(tty, data + 2, bytes_sent);
tty_flip_buffer_push(tty);
tty_kref_put(tty);
@@ -714,10 +731,17 @@ static void klsi_105_set_termios(struct tty_struct *tty,
unsigned int old_iflag = old_termios->c_iflag;
unsigned int cflag = tty->termios->c_cflag;
unsigned int old_cflag = old_termios->c_cflag;
- struct klsi_105_port_settings cfg;
+ struct klsi_105_port_settings *cfg;
unsigned long flags;
speed_t baud;
+ cfg = kmalloc(sizeof(*cfg), GFP_KERNEL);
+ if (!cfg) {
+ dev_err(&port->dev, "%s - out of memory for config buffer.\n",
+ __func__);
+ return;
+ }
+
/* lock while we are modifying the settings */
spin_lock_irqsave(&priv->lock, flags);
@@ -793,11 +817,11 @@ static void klsi_105_set_termios(struct tty_struct *tty,
case CS5:
dbg("%s - 5 bits/byte not supported", __func__);
spin_unlock_irqrestore(&priv->lock, flags);
- return ;
+ goto err;
case CS6:
dbg("%s - 6 bits/byte not supported", __func__);
spin_unlock_irqrestore(&priv->lock, flags);
- return ;
+ goto err;
case CS7:
priv->cfg.databits = kl5kusb105a_dtb_7;
break;
@@ -856,11 +880,13 @@ static void klsi_105_set_termios(struct tty_struct *tty,
#endif
;
}
- memcpy(&cfg, &priv->cfg, sizeof(cfg));
+ memcpy(cfg, &priv->cfg, sizeof(*cfg));
spin_unlock_irqrestore(&priv->lock, flags);
/* now commit changes to device */
- klsi_105_chg_port_settings(port, &cfg);
+ klsi_105_chg_port_settings(port, cfg);
+err:
+ kfree(cfg);
} /* klsi_105_set_termios */
diff --git a/drivers/usb/serial/kobil_sct.c b/drivers/usb/serial/kobil_sct.c
index 45ea694b3ae6..c113a2a0e10c 100644
--- a/drivers/usb/serial/kobil_sct.c
+++ b/drivers/usb/serial/kobil_sct.c
@@ -86,7 +86,7 @@ static void kobil_set_termios(struct tty_struct *tty,
struct usb_serial_port *port, struct ktermios *old);
static void kobil_init_termios(struct tty_struct *tty);
-static struct usb_device_id id_table [] = {
+static const struct usb_device_id id_table[] = {
{ USB_DEVICE(KOBIL_VENDOR_ID, KOBIL_ADAPTER_B_PRODUCT_ID) },
{ USB_DEVICE(KOBIL_VENDOR_ID, KOBIL_ADAPTER_K_PRODUCT_ID) },
{ USB_DEVICE(KOBIL_VENDOR_ID, KOBIL_USBTWIN_PRODUCT_ID) },
@@ -388,7 +388,6 @@ static void kobil_read_int_callback(struct urb *urb)
*/
/* END DEBUG */
- tty_buffer_request_room(tty, urb->actual_length);
tty_insert_flip_string(tty, data, urb->actual_length);
tty_flip_buffer_push(tty);
}
@@ -624,7 +623,6 @@ static void kobil_set_termios(struct tty_struct *tty,
unsigned short urb_val = 0;
int c_cflag = tty->termios->c_cflag;
speed_t speed;
- void *settings;
priv = usb_get_serial_port_data(port);
if (priv->device_type == KOBIL_USBTWIN_PRODUCT_ID ||
@@ -647,25 +645,13 @@ static void kobil_set_termios(struct tty_struct *tty,
}
urb_val |= (c_cflag & CSTOPB) ? SUSBCR_SPASB_2StopBits :
SUSBCR_SPASB_1StopBit;
-
- settings = kzalloc(50, GFP_KERNEL);
- if (!settings)
- return;
-
- sprintf(settings, "%d ", speed);
-
if (c_cflag & PARENB) {
- if (c_cflag & PARODD) {
+ if (c_cflag & PARODD)
urb_val |= SUSBCR_SPASB_OddParity;
- strcat(settings, "Odd Parity");
- } else {
+ else
urb_val |= SUSBCR_SPASB_EvenParity;
- strcat(settings, "Even Parity");
- }
- } else {
+ } else
urb_val |= SUSBCR_SPASB_NoParity;
- strcat(settings, "No Parity");
- }
tty->termios->c_cflag &= ~CMSPAR;
tty_encode_baud_rate(tty, speed, speed);
@@ -675,11 +661,10 @@ static void kobil_set_termios(struct tty_struct *tty,
USB_TYPE_VENDOR | USB_RECIP_ENDPOINT | USB_DIR_OUT,
urb_val,
0,
- settings,
+ NULL,
0,
KOBIL_TIMEOUT
);
- kfree(settings);
}
static int kobil_ioctl(struct tty_struct *tty, struct file *file,
diff --git a/drivers/usb/serial/mct_u232.c b/drivers/usb/serial/mct_u232.c
index cd009cb280a5..2849f8c32015 100644
--- a/drivers/usb/serial/mct_u232.c
+++ b/drivers/usb/serial/mct_u232.c
@@ -75,6 +75,7 @@
#include <linux/module.h>
#include <linux/spinlock.h>
#include <linux/uaccess.h>
+#include <asm/unaligned.h>
#include <linux/usb.h>
#include <linux/usb/serial.h>
#include "mct_u232.h"
@@ -110,7 +111,7 @@ static void mct_u232_unthrottle(struct tty_struct *tty);
/*
* All of the device info needed for the MCT USB-RS232 converter.
*/
-static struct usb_device_id id_table_combined [] = {
+static const struct usb_device_id id_table_combined[] = {
{ USB_DEVICE(MCT_U232_VID, MCT_U232_PID) },
{ USB_DEVICE(MCT_U232_VID, MCT_U232_SITECOM_PID) },
{ USB_DEVICE(MCT_U232_VID, MCT_U232_DU_H3SP_PID) },
@@ -231,19 +232,22 @@ static int mct_u232_calculate_baud_rate(struct usb_serial *serial,
static int mct_u232_set_baud_rate(struct tty_struct *tty,
struct usb_serial *serial, struct usb_serial_port *port, speed_t value)
{
- __le32 divisor;
+ unsigned int divisor;
int rc;
- unsigned char zero_byte = 0;
+ unsigned char *buf;
unsigned char cts_enable_byte = 0;
speed_t speed;
- divisor = cpu_to_le32(mct_u232_calculate_baud_rate(serial, value,
- &speed));
+ buf = kmalloc(MCT_U232_MAX_SIZE, GFP_KERNEL);
+ if (buf == NULL)
+ return -ENOMEM;
+ divisor = mct_u232_calculate_baud_rate(serial, value, &speed);
+ put_unaligned_le32(cpu_to_le32(divisor), buf);
rc = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
MCT_U232_SET_BAUD_RATE_REQUEST,
MCT_U232_SET_REQUEST_TYPE,
- 0, 0, &divisor, MCT_U232_SET_BAUD_RATE_SIZE,
+ 0, 0, buf, MCT_U232_SET_BAUD_RATE_SIZE,
WDR_TIMEOUT);
if (rc < 0) /*FIXME: What value speed results */
dev_err(&port->dev, "Set BAUD RATE %d failed (error = %d)\n",
@@ -269,10 +273,11 @@ static int mct_u232_set_baud_rate(struct tty_struct *tty,
a device which is not asserting 'CTS'.
*/
+ buf[0] = 0;
rc = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
MCT_U232_SET_UNKNOWN1_REQUEST,
MCT_U232_SET_REQUEST_TYPE,
- 0, 0, &zero_byte, MCT_U232_SET_UNKNOWN1_SIZE,
+ 0, 0, buf, MCT_U232_SET_UNKNOWN1_SIZE,
WDR_TIMEOUT);
if (rc < 0)
dev_err(&port->dev, "Sending USB device request code %d "
@@ -284,30 +289,40 @@ static int mct_u232_set_baud_rate(struct tty_struct *tty,
dbg("set_baud_rate: send second control message, data = %02X",
cts_enable_byte);
+ buf[0] = cts_enable_byte;
rc = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
MCT_U232_SET_CTS_REQUEST,
MCT_U232_SET_REQUEST_TYPE,
- 0, 0, &cts_enable_byte, MCT_U232_SET_CTS_SIZE,
+ 0, 0, buf, MCT_U232_SET_CTS_SIZE,
WDR_TIMEOUT);
if (rc < 0)
dev_err(&port->dev, "Sending USB device request code %d "
"failed (error = %d)\n", MCT_U232_SET_CTS_REQUEST, rc);
+ kfree(buf);
return rc;
} /* mct_u232_set_baud_rate */
static int mct_u232_set_line_ctrl(struct usb_serial *serial, unsigned char lcr)
{
int rc;
+ unsigned char *buf;
+
+ buf = kmalloc(MCT_U232_MAX_SIZE, GFP_KERNEL);
+ if (buf == NULL)
+ return -ENOMEM;
+
+ buf[0] = lcr;
rc = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
MCT_U232_SET_LINE_CTRL_REQUEST,
MCT_U232_SET_REQUEST_TYPE,
- 0, 0, &lcr, MCT_U232_SET_LINE_CTRL_SIZE,
+ 0, 0, buf, MCT_U232_SET_LINE_CTRL_SIZE,
WDR_TIMEOUT);
if (rc < 0)
dev_err(&serial->dev->dev,
"Set LINE CTRL 0x%x failed (error = %d)\n", lcr, rc);
dbg("set_line_ctrl: 0x%x", lcr);
+ kfree(buf);
return rc;
} /* mct_u232_set_line_ctrl */
@@ -315,23 +330,31 @@ static int mct_u232_set_modem_ctrl(struct usb_serial *serial,
unsigned int control_state)
{
int rc;
- unsigned char mcr = MCT_U232_MCR_NONE;
+ unsigned char mcr;
+ unsigned char *buf;
+
+ buf = kmalloc(MCT_U232_MAX_SIZE, GFP_KERNEL);
+ if (buf == NULL)
+ return -ENOMEM;
+ mcr = MCT_U232_MCR_NONE;
if (control_state & TIOCM_DTR)
mcr |= MCT_U232_MCR_DTR;
if (control_state & TIOCM_RTS)
mcr |= MCT_U232_MCR_RTS;
+ buf[0] = mcr;
rc = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
MCT_U232_SET_MODEM_CTRL_REQUEST,
MCT_U232_SET_REQUEST_TYPE,
- 0, 0, &mcr, MCT_U232_SET_MODEM_CTRL_SIZE,
+ 0, 0, buf, MCT_U232_SET_MODEM_CTRL_SIZE,
WDR_TIMEOUT);
if (rc < 0)
dev_err(&serial->dev->dev,
"Set MODEM CTRL 0x%x failed (error = %d)\n", mcr, rc);
dbg("set_modem_ctrl: state=0x%x ==> mcr=0x%x", control_state, mcr);
+ kfree(buf);
return rc;
} /* mct_u232_set_modem_ctrl */
@@ -339,17 +362,27 @@ static int mct_u232_get_modem_stat(struct usb_serial *serial,
unsigned char *msr)
{
int rc;
+ unsigned char *buf;
+
+ buf = kmalloc(MCT_U232_MAX_SIZE, GFP_KERNEL);
+ if (buf == NULL) {
+ *msr = 0;
+ return -ENOMEM;
+ }
rc = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
MCT_U232_GET_MODEM_STAT_REQUEST,
MCT_U232_GET_REQUEST_TYPE,
- 0, 0, msr, MCT_U232_GET_MODEM_STAT_SIZE,
+ 0, 0, buf, MCT_U232_GET_MODEM_STAT_SIZE,
WDR_TIMEOUT);
if (rc < 0) {
dev_err(&serial->dev->dev,
"Get MODEM STATus failed (error = %d)\n", rc);
*msr = 0;
+ } else {
+ *msr = buf[0];
}
dbg("get_modem_stat: 0x%x", *msr);
+ kfree(buf);
return rc;
} /* mct_u232_get_modem_stat */
diff --git a/drivers/usb/serial/mct_u232.h b/drivers/usb/serial/mct_u232.h
index 07b6bec31dc8..7417d5ce1e23 100644
--- a/drivers/usb/serial/mct_u232.h
+++ b/drivers/usb/serial/mct_u232.h
@@ -73,6 +73,8 @@
#define MCT_U232_SET_CTS_REQUEST 12
#define MCT_U232_SET_CTS_SIZE 1
+#define MCT_U232_MAX_SIZE 4 /* of MCT_XXX_SIZE */
+
/*
* Baud rate (divisor)
* Actually, there are two of them, MCT website calls them "Philips solution"
diff --git a/drivers/usb/serial/mos7720.c b/drivers/usb/serial/mos7720.c
index 763e32a44be0..0d47f2c4d59f 100644
--- a/drivers/usb/serial/mos7720.c
+++ b/drivers/usb/serial/mos7720.c
@@ -81,12 +81,15 @@ struct moschip_serial {
static int debug;
+static struct usb_serial_driver moschip7720_2port_driver;
+
#define USB_VENDOR_ID_MOSCHIP 0x9710
#define MOSCHIP_DEVICE_ID_7720 0x7720
#define MOSCHIP_DEVICE_ID_7715 0x7715
-static struct usb_device_id moschip_port_id_table[] = {
+static const struct usb_device_id moschip_port_id_table[] = {
{ USB_DEVICE(USB_VENDOR_ID_MOSCHIP, MOSCHIP_DEVICE_ID_7720) },
+ { USB_DEVICE(USB_VENDOR_ID_MOSCHIP, MOSCHIP_DEVICE_ID_7715) },
{ } /* terminating entry */
};
MODULE_DEVICE_TABLE(usb, moschip_port_id_table);
@@ -106,7 +109,7 @@ static void mos7720_interrupt_callback(struct urb *urb)
__u8 sp1;
__u8 sp2;
- dbg("%s", " : Entering\n");
+ dbg(" : Entering");
switch (status) {
case 0:
@@ -186,6 +189,75 @@ exit:
}
/*
+ * mos7715_interrupt_callback
+ * this is the 7715's callback function for when we have received data on
+ * the interrupt endpoint.
+ */
+static void mos7715_interrupt_callback(struct urb *urb)
+{
+ int result;
+ int length;
+ int status = urb->status;
+ __u8 *data;
+ __u8 iir;
+
+ switch (status) {
+ case 0:
+ /* success */
+ break;
+ case -ECONNRESET:
+ case -ENOENT:
+ case -ESHUTDOWN:
+ /* this urb is terminated, clean up */
+ dbg("%s - urb shutting down with status: %d", __func__,
+ status);
+ return;
+ default:
+ dbg("%s - nonzero urb status received: %d", __func__,
+ status);
+ goto exit;
+ }
+
+ length = urb->actual_length;
+ data = urb->transfer_buffer;
+
+ /* Structure of data from 7715 device:
+ * Byte 1: IIR serial Port
+ * Byte 2: unused
+ * Byte 2: DSR parallel port
+ * Byte 4: FIFO status for both */
+
+ if (unlikely(length != 4)) {
+ dbg("Wrong data !!!");
+ return;
+ }
+
+ iir = data[0];
+ if (!(iir & 0x01)) { /* serial port interrupt pending */
+ switch (iir & 0x0f) {
+ case SERIAL_IIR_RLS:
+ dbg("Serial Port: Receiver status error or address "
+ "bit detected in 9-bit mode\n");
+ break;
+ case SERIAL_IIR_CTI:
+ dbg("Serial Port: Receiver time out");
+ break;
+ case SERIAL_IIR_MS:
+ dbg("Serial Port: Modem status change");
+ break;
+ }
+ }
+
+exit:
+ result = usb_submit_urb(urb, GFP_ATOMIC);
+ if (result)
+ dev_err(&urb->dev->dev,
+ "%s - Error %d submitting control urb\n",
+ __func__, result);
+ return;
+}
+
+/*
* mos7720_bulk_in_callback
* this is the callback function for when we have received data on the
* bulk in endpoint.
@@ -206,7 +278,7 @@ static void mos7720_bulk_in_callback(struct urb *urb)
mos7720_port = urb->context;
if (!mos7720_port) {
- dbg("%s", "NULL mos7720_port pointer \n");
+ dbg("NULL mos7720_port pointer");
return ;
}
@@ -218,7 +290,6 @@ static void mos7720_bulk_in_callback(struct urb *urb)
tty = tty_port_tty_get(&port->port);
if (tty && urb->actual_length) {
- tty_buffer_request_room(tty, urb->actual_length);
tty_insert_flip_string(tty, data, urb->actual_length);
tty_flip_buffer_push(tty);
}
@@ -275,17 +346,15 @@ static void mos7720_bulk_out_data_callback(struct urb *urb)
* this function will be used for sending command to device
*/
static int send_mos_cmd(struct usb_serial *serial, __u8 request, __u16 value,
- __u16 index, void *data)
+ __u16 index, u8 *data)
{
int status;
- unsigned int pipe;
+ u8 *buf;
u16 product = le16_to_cpu(serial->dev->descriptor.idProduct);
- __u8 requesttype;
- __u16 size = 0x0000;
if (value < MOS_MAX_PORT) {
if (product == MOSCHIP_DEVICE_ID_7715)
- value = value*0x100+0x100;
+ value = 0x0200; /* identifies the 7715's serial port */
else
value = value*0x100+0x200;
} else {
@@ -298,27 +367,58 @@ static int send_mos_cmd(struct usb_serial *serial, __u8 request, __u16 value,
}
if (request == MOS_WRITE) {
- request = (__u8)MOS_WRITE;
- requesttype = (__u8)0x40;
- value = value + (__u16)*((unsigned char *)data);
- data = NULL;
- pipe = usb_sndctrlpipe(serial->dev, 0);
+ value = value + *data;
+ status = usb_control_msg(serial->dev,
+ usb_sndctrlpipe(serial->dev, 0), MOS_WRITE,
+ 0x40, value, index, NULL, 0, MOS_WDR_TIMEOUT);
} else {
- request = (__u8)MOS_READ;
- requesttype = (__u8)0xC0;
- size = 0x01;
- pipe = usb_rcvctrlpipe(serial->dev, 0);
+ buf = kmalloc(1, GFP_KERNEL);
+ if (!buf) {
+ status = -ENOMEM;
+ goto out;
+ }
+ status = usb_control_msg(serial->dev,
+ usb_rcvctrlpipe(serial->dev, 0), MOS_READ,
+ 0xc0, value, index, buf, 1, MOS_WDR_TIMEOUT);
+ *data = *buf;
+ kfree(buf);
}
-
- status = usb_control_msg(serial->dev, pipe, request, requesttype,
- value, index, data, size, MOS_WDR_TIMEOUT);
-
+out:
if (status < 0)
- dbg("Command Write failed Value %x index %x\n", value, index);
+ dbg("Command Write failed Value %x index %x", value, index);
return status;
}
+
+/*
+ * mos77xx_probe
+ * this function installs the appropriate read interrupt endpoint callback
+ * depending on whether the device is a 7720 or 7715, thus avoiding costly
+ * run-time checks in the high-frequency callback routine itself.
+ */
+static int mos77xx_probe(struct usb_serial *serial,
+ const struct usb_device_id *id)
+{
+ if (id->idProduct == MOSCHIP_DEVICE_ID_7715)
+ moschip7720_2port_driver.read_int_callback =
+ mos7715_interrupt_callback;
+ else
+ moschip7720_2port_driver.read_int_callback =
+ mos7720_interrupt_callback;
+
+ return 0;
+}
+
+static int mos77xx_calc_num_ports(struct usb_serial *serial)
+{
+ u16 product = le16_to_cpu(serial->dev->descriptor.idProduct);
+ if (product == MOSCHIP_DEVICE_ID_7715)
+ return 1;
+
+ return 2;
+}
+
static int mos7720_open(struct tty_struct *tty, struct usb_serial_port *port)
{
struct usb_serial *serial;
@@ -390,7 +490,7 @@ static int mos7720_open(struct tty_struct *tty, struct usb_serial_port *port)
*/
port_number = port->number - port->serial->minor;
send_mos_cmd(port->serial, MOS_READ, port_number, UART_LSR, &data);
- dbg("SS::%p LSR:%x\n", mos7720_port, data);
+ dbg("SS::%p LSR:%x", mos7720_port, data);
dbg("Check:Sending Command ..........");
@@ -729,7 +829,7 @@ static void mos7720_throttle(struct tty_struct *tty)
struct moschip_port *mos7720_port;
int status;
- dbg("%s- port %d\n", __func__, port->number);
+ dbg("%s- port %d", __func__, port->number);
mos7720_port = usb_get_serial_port_data(port);
@@ -1208,7 +1308,7 @@ static void mos7720_set_termios(struct tty_struct *tty,
return;
}
- dbg("%s\n", "setting termios - ASPIRE");
+ dbg("setting termios - ASPIRE");
cflag = tty->termios->c_cflag;
@@ -1226,7 +1326,7 @@ static void mos7720_set_termios(struct tty_struct *tty,
change_port_settings(tty, mos7720_port, old_termios);
if (!port->read_urb) {
- dbg("%s", "URB KILLED !!!!!\n");
+ dbg("URB KILLED !!!!!");
return;
}
@@ -1495,6 +1595,7 @@ static int mos7720_startup(struct usb_serial *serial)
struct usb_device *dev;
int i;
char data;
+ u16 product = le16_to_cpu(serial->dev->descriptor.idProduct);
dbg("%s: Entering ..........", __func__);
@@ -1514,6 +1615,29 @@ static int mos7720_startup(struct usb_serial *serial)
usb_set_serial_data(serial, mos7720_serial);
+ /*
+ * The 7715 uses the first bulk in/out endpoint pair for the parallel
+ * port, and the second for the serial port. Because the usbserial core
+ * assumes both pairs are serial ports, we must engage in a bit of
+ * subterfuge and swap the pointers for ports 0 and 1 in order to make
+ * port 0 point to the serial port. However, both moschip devices use a
+ * single interrupt-in endpoint for both ports (as mentioned a little
+ * further down), and this endpoint was assigned to port 0. So after
+ * the swap, we must copy the interrupt endpoint elements from port 1
+ * (as newly assigned) to port 0, and null out port 1 pointers.
+ */
+ if (product == MOSCHIP_DEVICE_ID_7715) {
+ struct usb_serial_port *tmp = serial->port[0];
+ serial->port[0] = serial->port[1];
+ serial->port[1] = tmp;
+ serial->port[0]->interrupt_in_urb = tmp->interrupt_in_urb;
+ serial->port[0]->interrupt_in_buffer = tmp->interrupt_in_buffer;
+ serial->port[0]->interrupt_in_endpointAddress =
+ tmp->interrupt_in_endpointAddress;
+ serial->port[1]->interrupt_in_urb = NULL;
+ serial->port[1]->interrupt_in_buffer = NULL;
+ }
+
/* we set up the pointers to the endpoints in the mos7720_open *
* function, as the structures aren't created yet. */
@@ -1529,7 +1653,7 @@ static int mos7720_startup(struct usb_serial *serial)
/* Initialize all port interrupt end point to port 0 int
* endpoint. Our device has only one interrupt endpoint
- * comman to all ports */
+ * common to all ports */
serial->port[i]->interrupt_in_endpointAddress =
serial->port[0]->interrupt_in_endpointAddress;
@@ -1584,11 +1708,12 @@ static struct usb_serial_driver moschip7720_2port_driver = {
.description = "Moschip 2 port adapter",
.usb_driver = &usb_driver,
.id_table = moschip_port_id_table,
- .num_ports = 2,
+ .calc_num_ports = mos77xx_calc_num_ports,
.open = mos7720_open,
.close = mos7720_close,
.throttle = mos7720_throttle,
.unthrottle = mos7720_unthrottle,
+ .probe = mos77xx_probe,
.attach = mos7720_startup,
.release = mos7720_release,
.ioctl = mos7720_ioctl,
@@ -1600,7 +1725,7 @@ static struct usb_serial_driver moschip7720_2port_driver = {
.chars_in_buffer = mos7720_chars_in_buffer,
.break_ctl = mos7720_break,
.read_bulk_callback = mos7720_bulk_in_callback,
- .read_int_callback = mos7720_interrupt_callback,
+ .read_int_callback = NULL /* dynamically assigned in probe() */
};
static int __init moschip7720_init(void)
diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c
index 2cfe2451ed97..2fda1c0182b7 100644
--- a/drivers/usb/serial/mos7840.c
+++ b/drivers/usb/serial/mos7840.c
@@ -181,7 +181,7 @@
#define URB_TRANSFER_BUFFER_SIZE 32 /* URB Size */
-static struct usb_device_id moschip_port_id_table[] = {
+static const struct usb_device_id moschip_port_id_table[] = {
{USB_DEVICE(USB_VENDOR_ID_MOSCHIP, MOSCHIP_DEVICE_ID_7840)},
{USB_DEVICE(USB_VENDOR_ID_MOSCHIP, MOSCHIP_DEVICE_ID_7820)},
{USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USO9ML2_2)},
@@ -198,7 +198,7 @@ static struct usb_device_id moschip_port_id_table[] = {
{} /* terminating entry */
};
-static __devinitdata struct usb_device_id moschip_id_table_combined[] = {
+static const struct usb_device_id moschip_id_table_combined[] __devinitconst = {
{USB_DEVICE(USB_VENDOR_ID_MOSCHIP, MOSCHIP_DEVICE_ID_7840)},
{USB_DEVICE(USB_VENDOR_ID_MOSCHIP, MOSCHIP_DEVICE_ID_7820)},
{USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USO9ML2_2)},
@@ -283,12 +283,19 @@ static int mos7840_get_reg_sync(struct usb_serial_port *port, __u16 reg,
{
struct usb_device *dev = port->serial->dev;
int ret = 0;
+ u8 *buf;
+
+ buf = kmalloc(VENDOR_READ_LENGTH, GFP_KERNEL);
+ if (!buf)
+ return -ENOMEM;
ret = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), MCS_RDREQ,
- MCS_RD_RTYPE, 0, reg, val, VENDOR_READ_LENGTH,
+ MCS_RD_RTYPE, 0, reg, buf, VENDOR_READ_LENGTH,
MOS_WDR_TIMEOUT);
+ *val = buf[0];
dbg("mos7840_get_reg_sync offset is %x, return val %x", reg, *val);
- *val = (*val) & 0x00ff;
+
+ kfree(buf);
return ret;
}
@@ -341,6 +348,11 @@ static int mos7840_get_uart_reg(struct usb_serial_port *port, __u16 reg,
struct usb_device *dev = port->serial->dev;
int ret = 0;
__u16 Wval;
+ u8 *buf;
+
+ buf = kmalloc(VENDOR_READ_LENGTH, GFP_KERNEL);
+ if (!buf)
+ return -ENOMEM;
/* dbg("application number is %4x",
(((__u16)port->number - (__u16)(port->serial->minor))+1)<<8); */
@@ -364,9 +376,11 @@ static int mos7840_get_uart_reg(struct usb_serial_port *port, __u16 reg,
}
}
ret = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), MCS_RDREQ,
- MCS_RD_RTYPE, Wval, reg, val, VENDOR_READ_LENGTH,
+ MCS_RD_RTYPE, Wval, reg, buf, VENDOR_READ_LENGTH,
MOS_WDR_TIMEOUT);
- *val = (*val) & 0x00ff;
+ *val = buf[0];
+
+ kfree(buf);
return ret;
}
@@ -750,7 +764,6 @@ static void mos7840_bulk_in_callback(struct urb *urb)
if (urb->actual_length) {
tty = tty_port_tty_get(&mos7840_port->port->port);
if (tty) {
- tty_buffer_request_room(tty, urb->actual_length);
tty_insert_flip_string(tty, data, urb->actual_length);
dbg(" %s ", data);
tty_flip_buffer_push(tty);
diff --git a/drivers/usb/serial/moto_modem.c b/drivers/usb/serial/moto_modem.c
index 99bd00f5188a..cf1718394e18 100644
--- a/drivers/usb/serial/moto_modem.c
+++ b/drivers/usb/serial/moto_modem.c
@@ -21,7 +21,7 @@
#include <linux/usb.h>
#include <linux/usb/serial.h>
-static struct usb_device_id id_table [] = {
+static const struct usb_device_id id_table[] = {
{ USB_DEVICE(0x05c6, 0x3197) }, /* unknown Motorola phone */
{ USB_DEVICE(0x0c44, 0x0022) }, /* unknown Mororola phone */
{ USB_DEVICE(0x22b8, 0x2a64) }, /* Motorola KRZR K1m */
diff --git a/drivers/usb/serial/navman.c b/drivers/usb/serial/navman.c
index 5ceaa4c6be09..04a6cbbed2c0 100644
--- a/drivers/usb/serial/navman.c
+++ b/drivers/usb/serial/navman.c
@@ -22,7 +22,7 @@
static int debug;
-static struct usb_device_id id_table [] = {
+static const struct usb_device_id id_table[] = {
{ USB_DEVICE(0x0a99, 0x0001) }, /* Talon Technology device */
{ },
};
@@ -66,7 +66,6 @@ static void navman_read_int_callback(struct urb *urb)
tty = tty_port_tty_get(&port->port);
if (tty && urb->actual_length) {
- tty_buffer_request_room(tty, urb->actual_length);
tty_insert_flip_string(tty, data, urb->actual_length);
tty_flip_buffer_push(tty);
}
diff --git a/drivers/usb/serial/omninet.c b/drivers/usb/serial/omninet.c
index 062265038bf0..89c724c0ac0a 100644
--- a/drivers/usb/serial/omninet.c
+++ b/drivers/usb/serial/omninet.c
@@ -75,7 +75,7 @@ static void omninet_disconnect(struct usb_serial *serial);
static void omninet_release(struct usb_serial *serial);
static int omninet_attach(struct usb_serial *serial);
-static struct usb_device_id id_table[] = {
+static const struct usb_device_id id_table[] = {
{ USB_DEVICE(ZYXEL_VENDOR_ID, ZYXEL_OMNINET_ID) },
{ USB_DEVICE(ZYXEL_VENDOR_ID, BT_IGNITIONPRO_ID) },
{ } /* Terminating entry */
@@ -218,8 +218,8 @@ static void omninet_read_bulk_callback(struct urb *urb)
if (debug && header->oh_xxx != 0x30) {
if (urb->actual_length) {
- printk(KERN_DEBUG __FILE__
- ": omninet_read %d: ", header->oh_len);
+ printk(KERN_DEBUG "%s: omninet_read %d: ",
+ __FILE__, header->oh_len);
for (i = 0; i < (header->oh_len +
OMNINET_HEADERLEN); i++)
printk("%.2x ", data[i]);
@@ -332,7 +332,7 @@ static void omninet_write_bulk_callback(struct urb *urb)
struct usb_serial_port *port = urb->context;
int status = urb->status;
- dbg("%s - port %0x\n", __func__, port->number);
+ dbg("%s - port %0x", __func__, port->number);
port->write_urb_busy = 0;
if (status) {
diff --git a/drivers/usb/serial/opticon.c b/drivers/usb/serial/opticon.c
index 4cdb975caa89..f37476e22684 100644
--- a/drivers/usb/serial/opticon.c
+++ b/drivers/usb/serial/opticon.c
@@ -22,7 +22,7 @@
static int debug;
-static struct usb_device_id id_table[] = {
+static const struct usb_device_id id_table[] = {
{ USB_DEVICE(0x065a, 0x0009) },
{ },
};
@@ -55,7 +55,6 @@ static void opticon_bulk_callback(struct urb *urb)
int status = urb->status;
struct tty_struct *tty;
int result;
- int available_room = 0;
int data_length;
dbg("%s - port %d", __func__, port->number);
@@ -96,13 +95,9 @@ static void opticon_bulk_callback(struct urb *urb)
/* real data, send it to the tty layer */
tty = tty_port_tty_get(&port->port);
if (tty) {
- available_room = tty_buffer_request_room(tty,
- data_length);
- if (available_room) {
- tty_insert_flip_string(tty, data,
- available_room);
- tty_flip_buffer_push(tty);
- }
+ tty_insert_flip_string(tty, data,
+ data_length);
+ tty_flip_buffer_push(tty);
tty_kref_put(tty);
}
} else {
@@ -217,7 +212,7 @@ static int opticon_write(struct tty_struct *tty, struct usb_serial_port *port,
spin_lock_irqsave(&priv->lock, flags);
if (priv->outstanding_urbs > URB_UPPER_LIMIT) {
spin_unlock_irqrestore(&priv->lock, flags);
- dbg("%s - write limit hit\n", __func__);
+ dbg("%s - write limit hit", __func__);
return 0;
}
priv->outstanding_urbs++;
@@ -288,7 +283,7 @@ static int opticon_write_room(struct tty_struct *tty)
spin_lock_irqsave(&priv->lock, flags);
if (priv->outstanding_urbs > URB_UPPER_LIMIT * 2 / 3) {
spin_unlock_irqrestore(&priv->lock, flags);
- dbg("%s - write limit hit\n", __func__);
+ dbg("%s - write limit hit", __func__);
return 0;
}
spin_unlock_irqrestore(&priv->lock, flags);
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 6e94a6711f08..847b805d63a3 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -336,15 +336,42 @@ static int option_resume(struct usb_serial *serial);
#define AIRPLUS_VENDOR_ID 0x1011
#define AIRPLUS_PRODUCT_MCD650 0x3198
+/* Longcheer/Longsung vendor ID; makes whitelabel devices that
+ * many other vendors like 4G Systems, Alcatel, ChinaBird,
+ * Mobidata, etc sell under their own brand names.
+ */
+#define LONGCHEER_VENDOR_ID 0x1c9e
+
/* 4G Systems products */
-#define FOUR_G_SYSTEMS_VENDOR_ID 0x1c9e
+/* This is the 4G XS Stick W14 a.k.a. Mobilcom Debitel Surf-Stick *
+ * It seems to contain a Qualcomm QSC6240/6290 chipset */
#define FOUR_G_SYSTEMS_PRODUCT_W14 0x9603
/* Haier products */
#define HAIER_VENDOR_ID 0x201e
#define HAIER_PRODUCT_CE100 0x2009
-static struct usb_device_id option_ids[] = {
+/* some devices interfaces need special handling due to a number of reasons */
+enum option_blacklist_reason {
+ OPTION_BLACKLIST_NONE = 0,
+ OPTION_BLACKLIST_SENDSETUP = 1,
+ OPTION_BLACKLIST_RESERVED_IF = 2
+};
+
+struct option_blacklist_info {
+ const u32 infolen; /* number of interface numbers on blacklist */
+ const u8 *ifaceinfo; /* pointer to the array holding the numbers */
+ enum option_blacklist_reason reason;
+};
+
+static const u8 four_g_w14_no_sendsetup[] = { 0, 1 };
+static const struct option_blacklist_info four_g_w14_blacklist = {
+ .infolen = ARRAY_SIZE(four_g_w14_no_sendsetup),
+ .ifaceinfo = four_g_w14_no_sendsetup,
+ .reason = OPTION_BLACKLIST_SENDSETUP
+};
+
+static const struct usb_device_id option_ids[] = {
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COLT) },
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_RICOLA) },
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_RICOLA_LIGHT) },
@@ -644,7 +671,9 @@ static struct usb_device_id option_ids[] = {
{ USB_DEVICE(ALCATEL_VENDOR_ID, ALCATEL_PRODUCT_X060S) },
{ USB_DEVICE(AIRPLUS_VENDOR_ID, AIRPLUS_PRODUCT_MCD650) },
{ USB_DEVICE(TLAYTECH_VENDOR_ID, TLAYTECH_PRODUCT_TEU800) },
- { USB_DEVICE(FOUR_G_SYSTEMS_VENDOR_ID, FOUR_G_SYSTEMS_PRODUCT_W14) },
+ { USB_DEVICE(LONGCHEER_VENDOR_ID, FOUR_G_SYSTEMS_PRODUCT_W14),
+ .driver_info = (kernel_ulong_t)&four_g_w14_blacklist
+ },
{ USB_DEVICE(HAIER_VENDOR_ID, HAIER_PRODUCT_CE100) },
{ } /* Terminating entry */
};
@@ -709,6 +738,7 @@ struct option_intf_private {
spinlock_t susp_lock;
unsigned int suspended:1;
int in_flight;
+ struct option_blacklist_info *blacklist_info;
};
struct option_port_private {
@@ -778,9 +808,27 @@ static int option_probe(struct usb_serial *serial,
if (!data)
return -ENOMEM;
spin_lock_init(&data->susp_lock);
+ data->blacklist_info = (struct option_blacklist_info*) id->driver_info;
return 0;
}
+static enum option_blacklist_reason is_blacklisted(const u8 ifnum,
+ const struct option_blacklist_info *blacklist)
+{
+ const u8 *info;
+ int i;
+
+ if (blacklist) {
+ info = blacklist->ifaceinfo;
+
+ for (i = 0; i < blacklist->infolen; i++) {
+ if (info[i] == ifnum)
+ return blacklist->reason;
+ }
+ }
+ return OPTION_BLACKLIST_NONE;
+}
+
static void option_set_termios(struct tty_struct *tty,
struct usb_serial_port *port, struct ktermios *old_termios)
{
@@ -921,7 +969,6 @@ static void option_indat_callback(struct urb *urb)
} else {
tty = tty_port_tty_get(&port->port);
if (urb->actual_length) {
- tty_buffer_request_room(tty, urb->actual_length);
tty_insert_flip_string(tty, data, urb->actual_length);
tty_flip_buffer_push(tty);
} else
@@ -929,9 +976,9 @@ static void option_indat_callback(struct urb *urb)
tty_kref_put(tty);
/* Resubmit urb so we continue receiving */
- if (port->port.count && status != -ESHUTDOWN) {
+ if (status != -ESHUTDOWN) {
err = usb_submit_urb(urb, GFP_ATOMIC);
- if (err)
+ if (err && err != -EPERM)
printk(KERN_ERR "%s: resubmit read urb failed. "
"(%d)", __func__, err);
else
@@ -985,7 +1032,7 @@ static void option_instat_callback(struct urb *urb)
(struct usb_ctrlrequest *)urb->transfer_buffer;
if (!req_pkt) {
- dbg("%s: NULL req_pkt\n", __func__);
+ dbg("%s: NULL req_pkt", __func__);
return;
}
if ((req_pkt->bRequestType == 0xA1) &&
@@ -1211,11 +1258,19 @@ static void option_setup_urbs(struct usb_serial *serial)
static int option_send_setup(struct usb_serial_port *port)
{
struct usb_serial *serial = port->serial;
+ struct option_intf_private *intfdata =
+ (struct option_intf_private *) serial->private;
struct option_port_private *portdata;
int ifNum = serial->interface->cur_altsetting->desc.bInterfaceNumber;
int val = 0;
dbg("%s", __func__);
+ if (is_blacklisted(ifNum, intfdata->blacklist_info) ==
+ OPTION_BLACKLIST_SENDSETUP) {
+ dbg("No send_setup on blacklisted interface #%d\n", ifNum);
+ return -EIO;
+ }
+
portdata = usb_get_serial_port_data(port);
if (portdata->dtr_state)
@@ -1401,7 +1456,7 @@ static int option_resume(struct usb_serial *serial)
for (i = 0; i < serial->num_ports; i++) {
port = serial->port[i];
if (!port->interrupt_in_urb) {
- dbg("%s: No interrupt URB for port %d\n", __func__, i);
+ dbg("%s: No interrupt URB for port %d", __func__, i);
continue;
}
err = usb_submit_urb(port->interrupt_in_urb, GFP_NOIO);
diff --git a/drivers/usb/serial/oti6858.c b/drivers/usb/serial/oti6858.c
index c644e26394b4..deeacdea05db 100644
--- a/drivers/usb/serial/oti6858.c
+++ b/drivers/usb/serial/oti6858.c
@@ -58,7 +58,7 @@
#define OTI6858_AUTHOR "Tomasz Michal Lukaszewski <FIXME@FIXME>"
#define OTI6858_VERSION "0.1"
-static struct usb_device_id id_table [] = {
+static const struct usb_device_id id_table[] = {
{ USB_DEVICE(OTI6858_VENDOR_ID, OTI6858_PRODUCT_ID) },
{ }
};
@@ -302,7 +302,7 @@ void send_data(struct work_struct *work)
struct usb_serial_port *port = priv->port;
int count = 0, result;
unsigned long flags;
- unsigned char allow;
+ u8 *allow;
dbg("%s(port = %d)", __func__, port->number);
@@ -321,13 +321,20 @@ void send_data(struct work_struct *work)
count = port->bulk_out_size;
if (count != 0) {
+ allow = kmalloc(1, GFP_KERNEL);
+ if (!allow) {
+ dev_err(&port->dev, "%s(): kmalloc failed\n",
+ __func__);
+ return;
+ }
result = usb_control_msg(port->serial->dev,
usb_rcvctrlpipe(port->serial->dev, 0),
OTI6858_REQ_T_CHECK_TXBUFF,
OTI6858_REQ_CHECK_TXBUFF,
- count, 0, &allow, 1, 100);
- if (result != 1 || allow != 0)
+ count, 0, allow, 1, 100);
+ if (result != 1 || *allow != 0)
count = 0;
+ kfree(allow);
}
if (count == 0) {
@@ -578,9 +585,6 @@ static int oti6858_open(struct tty_struct *tty, struct usb_serial_port *port)
usb_clear_halt(serial->dev, port->write_urb->pipe);
usb_clear_halt(serial->dev, port->read_urb->pipe);
- if (port->port.count != 1)
- return 0;
-
buf = kmalloc(OTI6858_CTRL_PKT_SIZE, GFP_KERNEL);
if (buf == NULL) {
dev_err(&port->dev, "%s(): out of memory!\n", __func__);
@@ -927,10 +931,6 @@ static void oti6858_read_bulk_callback(struct urb *urb)
spin_unlock_irqrestore(&priv->lock, flags);
if (status != 0) {
- if (!port->port.count) {
- dbg("%s(): port is closed, exiting", __func__);
- return;
- }
/*
if (status == -EPROTO) {
* PL2303 mysteriously fails with -EPROTO reschedule
@@ -954,14 +954,12 @@ static void oti6858_read_bulk_callback(struct urb *urb)
}
tty_kref_put(tty);
- /* schedule the interrupt urb if we are still open */
- if (port->port.count != 0) {
- port->interrupt_in_urb->dev = port->serial->dev;
- result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC);
- if (result != 0) {
- dev_err(&port->dev, "%s(): usb_submit_urb() failed,"
- " error %d\n", __func__, result);
- }
+ /* schedule the interrupt urb */
+ port->interrupt_in_urb->dev = port->serial->dev;
+ result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC);
+ if (result != 0 && result != -EPERM) {
+ dev_err(&port->dev, "%s(): usb_submit_urb() failed,"
+ " error %d\n", __func__, result);
}
}
diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c
index 9ec1a49e2362..73d5f346d3e0 100644
--- a/drivers/usb/serial/pl2303.c
+++ b/drivers/usb/serial/pl2303.c
@@ -50,7 +50,7 @@ struct pl2303_buf {
char *buf_put;
};
-static struct usb_device_id id_table [] = {
+static const struct usb_device_id id_table[] = {
{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID) },
{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_RSAQ2) },
{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_DCU11) },
@@ -451,7 +451,6 @@ static void pl2303_send(struct usb_serial_port *port)
port->write_urb->transfer_buffer);
port->write_urb->transfer_buffer_length = count;
- port->write_urb->dev = port->serial->dev;
result = usb_submit_urb(port->write_urb, GFP_ATOMIC);
if (result) {
dev_err(&port->dev, "%s - failed submitting write urb,"
@@ -769,7 +768,6 @@ static int pl2303_open(struct tty_struct *tty, struct usb_serial_port *port)
pl2303_set_termios(tty, port, &tmp_termios);
dbg("%s - submitting read urb", __func__);
- port->read_urb->dev = serial->dev;
result = usb_submit_urb(port->read_urb, GFP_KERNEL);
if (result) {
dev_err(&port->dev, "%s - failed submitting read urb,"
@@ -779,7 +777,6 @@ static int pl2303_open(struct tty_struct *tty, struct usb_serial_port *port)
}
dbg("%s - submitting interrupt urb", __func__);
- port->interrupt_in_urb->dev = serial->dev;
result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
if (result) {
dev_err(&port->dev, "%s - failed submitting interrupt urb,"
@@ -895,10 +892,23 @@ static int wait_modem_info(struct usb_serial_port *port, unsigned int arg)
static int pl2303_ioctl(struct tty_struct *tty, struct file *file,
unsigned int cmd, unsigned long arg)
{
+ struct serial_struct ser;
struct usb_serial_port *port = tty->driver_data;
dbg("%s (%d) cmd = 0x%04x", __func__, port->number, cmd);
switch (cmd) {
+ case TIOCGSERIAL:
+ memset(&ser, 0, sizeof ser);
+ ser.type = PORT_16654;
+ ser.line = port->serial->minor;
+ ser.port = port->number;
+ ser.baud_base = 460800;
+
+ if (copy_to_user((void __user *)arg, &ser, sizeof ser))
+ return -EFAULT;
+
+ return 0;
+
case TIOCMIWAIT:
dbg("%s (%d) TIOCMIWAIT", __func__, port->number);
return wait_modem_info(port, arg);
@@ -1042,7 +1052,6 @@ static void pl2303_push_data(struct tty_struct *tty,
tty_flag = TTY_FRAME;
dbg("%s - tty_flag = %d", __func__, tty_flag);
- tty_buffer_request_room(tty, urb->actual_length + 1);
/* overrun is special, not associated with a char */
if (line_status & UART_OVERRUN_ERROR)
tty_insert_flip_char(tty, 0, TTY_OVERRUN);
@@ -1072,16 +1081,11 @@ static void pl2303_read_bulk_callback(struct urb *urb)
if (status) {
dbg("%s - urb status = %d", __func__, status);
- if (!port->port.count) {
- dbg("%s - port is closed, exiting.", __func__);
- return;
- }
if (status == -EPROTO) {
/* PL2303 mysteriously fails with -EPROTO reschedule
* the read */
dbg("%s - caught -EPROTO, resubmitting the urb",
__func__);
- urb->dev = port->serial->dev;
result = usb_submit_urb(urb, GFP_ATOMIC);
if (result)
dev_err(&urb->dev->dev, "%s - failed"
@@ -1108,15 +1112,10 @@ static void pl2303_read_bulk_callback(struct urb *urb)
}
tty_kref_put(tty);
/* Schedule the next read _if_ we are still open */
- if (port->port.count) {
- urb->dev = port->serial->dev;
- result = usb_submit_urb(urb, GFP_ATOMIC);
- if (result)
- dev_err(&urb->dev->dev, "%s - failed resubmitting"
- " read urb, error %d\n", __func__, result);
- }
-
- return;
+ result = usb_submit_urb(urb, GFP_ATOMIC);
+ if (result && result != -EPERM)
+ dev_err(&urb->dev->dev, "%s - failed resubmitting"
+ " read urb, error %d\n", __func__, result);
}
static void pl2303_write_bulk_callback(struct urb *urb)
@@ -1146,7 +1145,6 @@ static void pl2303_write_bulk_callback(struct urb *urb)
dbg("%s - nonzero write bulk status received: %d", __func__,
status);
port->write_urb->transfer_buffer_length = 1;
- port->write_urb->dev = port->serial->dev;
result = usb_submit_urb(port->write_urb, GFP_ATOMIC);
if (result)
dev_err(&urb->dev->dev, "%s - failed resubmitting write"
diff --git a/drivers/usb/serial/qcaux.c b/drivers/usb/serial/qcaux.c
new file mode 100644
index 000000000000..0b9362061713
--- /dev/null
+++ b/drivers/usb/serial/qcaux.c
@@ -0,0 +1,96 @@
+/*
+ * Qualcomm USB Auxiliary Serial Port driver
+ *
+ * Copyright (C) 2008 Greg Kroah-Hartman <greg@kroah.com>
+ * Copyright (C) 2010 Dan Williams <dcbw@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Devices listed here usually provide a CDC ACM port on which normal modem
+ * AT commands and PPP can be used. But when that port is in-use by PPP it
+ * cannot be used simultaneously for status or signal strength. Instead, the
+ * ports here can be queried for that information using the Qualcomm DM
+ * protocol.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/tty.h>
+#include <linux/module.h>
+#include <linux/usb.h>
+#include <linux/usb/serial.h>
+
+/* NOTE: for now, only use this driver for devices that provide a CDC-ACM port
+ * for normal AT commands, but also provide secondary USB interfaces for the
+ * QCDM-capable ports. Devices that do not provide a CDC-ACM port should
+ * probably be driven by option.ko.
+ */
+
+/* UTStarcom/Pantech/Curitel devices */
+#define UTSTARCOM_VENDOR_ID 0x106c
+#define UTSTARCOM_PRODUCT_PC5740 0x3701
+#define UTSTARCOM_PRODUCT_PC5750 0x3702 /* aka Pantech PX-500 */
+#define UTSTARCOM_PRODUCT_UM150 0x3711
+#define UTSTARCOM_PRODUCT_UM175_V1 0x3712
+#define UTSTARCOM_PRODUCT_UM175_V2 0x3714
+#define UTSTARCOM_PRODUCT_UM175_ALLTEL 0x3715
+
+/* CMOTECH devices */
+#define CMOTECH_VENDOR_ID 0x16d8
+#define CMOTECH_PRODUCT_CDU550 0x5553
+#define CMOTECH_PRODUCT_CDX650 0x6512
+
+static struct usb_device_id id_table[] = {
+ { USB_DEVICE_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, UTSTARCOM_PRODUCT_PC5740, 0xff, 0x00, 0x00) },
+ { USB_DEVICE_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, UTSTARCOM_PRODUCT_PC5750, 0xff, 0x00, 0x00) },
+ { USB_DEVICE_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, UTSTARCOM_PRODUCT_UM150, 0xff, 0x00, 0x00) },
+ { USB_DEVICE_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, UTSTARCOM_PRODUCT_UM175_V1, 0xff, 0x00, 0x00) },
+ { USB_DEVICE_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, UTSTARCOM_PRODUCT_UM175_V2, 0xff, 0x00, 0x00) },
+ { USB_DEVICE_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, UTSTARCOM_PRODUCT_UM175_ALLTEL, 0xff, 0x00, 0x00) },
+ { USB_DEVICE_AND_INTERFACE_INFO(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CDU550, 0xff, 0xff, 0x00) },
+ { USB_DEVICE_AND_INTERFACE_INFO(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CDX650, 0xff, 0xff, 0x00) },
+ { },
+};
+MODULE_DEVICE_TABLE(usb, id_table);
+
+static struct usb_driver qcaux_driver = {
+ .name = "qcaux",
+ .probe = usb_serial_probe,
+ .disconnect = usb_serial_disconnect,
+ .id_table = id_table,
+ .no_dynamic_id = 1,
+};
+
+static struct usb_serial_driver qcaux_device = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "qcaux",
+ },
+ .id_table = id_table,
+ .num_ports = 1,
+};
+
+static int __init qcaux_init(void)
+{
+ int retval;
+
+ retval = usb_serial_register(&qcaux_device);
+ if (retval)
+ return retval;
+ retval = usb_register(&qcaux_driver);
+ if (retval)
+ usb_serial_deregister(&qcaux_device);
+ return retval;
+}
+
+static void __exit qcaux_exit(void)
+{
+ usb_deregister(&qcaux_driver);
+ usb_serial_deregister(&qcaux_device);
+}
+
+module_init(qcaux_init);
+module_exit(qcaux_exit);
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/serial/qcserial.c b/drivers/usb/serial/qcserial.c
index 7528b8d57f1c..310ff6ec6567 100644
--- a/drivers/usb/serial/qcserial.c
+++ b/drivers/usb/serial/qcserial.c
@@ -21,7 +21,7 @@
static int debug;
-static struct usb_device_id id_table[] = {
+static const struct usb_device_id id_table[] = {
{USB_DEVICE(0x05c6, 0x9211)}, /* Acer Gobi QDL device */
{USB_DEVICE(0x05c6, 0x9212)}, /* Acer Gobi Modem Device */
{USB_DEVICE(0x03f0, 0x1f1d)}, /* HP un2400 Gobi Modem Device */
diff --git a/drivers/usb/serial/siemens_mpi.c b/drivers/usb/serial/siemens_mpi.c
index 951ea0c6ba77..cb8195cabfde 100644
--- a/drivers/usb/serial/siemens_mpi.c
+++ b/drivers/usb/serial/siemens_mpi.c
@@ -22,7 +22,7 @@
#define DRIVER_DESC "Driver for Siemens USB/MPI adapter"
-static struct usb_device_id id_table[] = {
+static const struct usb_device_id id_table[] = {
/* Vendor and product id for 6ES7-972-0CB20-0XA0 */
{ USB_DEVICE(0x908, 0x0004) },
{ },
diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c
index 3eb6143bb646..34e6f894cba9 100644
--- a/drivers/usb/serial/sierra.c
+++ b/drivers/usb/serial/sierra.c
@@ -226,7 +226,7 @@ static const struct sierra_iface_info direct_ip_interface_blacklist = {
.ifaceinfo = direct_ip_non_serial_ifaces,
};
-static struct usb_device_id id_table [] = {
+static const struct usb_device_id id_table[] = {
{ USB_DEVICE(0x0F3D, 0x0112) }, /* Airprime/Sierra PC 5220 */
{ USB_DEVICE(0x03F0, 0x1B1D) }, /* HP ev2200 a.k.a MC5720 */
{ USB_DEVICE(0x03F0, 0x1E1D) }, /* HP hs2300 a.k.a MC8775 */
@@ -304,16 +304,6 @@ static struct usb_device_id id_table [] = {
};
MODULE_DEVICE_TABLE(usb, id_table);
-static struct usb_driver sierra_driver = {
- .name = "sierra",
- .probe = usb_serial_probe,
- .disconnect = usb_serial_disconnect,
- .suspend = usb_serial_suspend,
- .resume = usb_serial_resume,
- .id_table = id_table,
- .no_dynamic_id = 1,
- .supports_autosuspend = 1,
-};
struct sierra_port_private {
spinlock_t lock; /* lock the structure */
@@ -477,7 +467,7 @@ static void sierra_outdat_callback(struct urb *urb)
static int sierra_write(struct tty_struct *tty, struct usb_serial_port *port,
const unsigned char *buf, int count)
{
- struct sierra_port_private *portdata = usb_get_serial_port_data(port);
+ struct sierra_port_private *portdata;
struct sierra_intf_private *intfdata;
struct usb_serial *serial = port->serial;
unsigned long flags;
@@ -604,14 +594,15 @@ static void sierra_indat_callback(struct urb *urb)
} else {
if (urb->actual_length) {
tty = tty_port_tty_get(&port->port);
-
- tty_buffer_request_room(tty, urb->actual_length);
- tty_insert_flip_string(tty, data, urb->actual_length);
- tty_flip_buffer_push(tty);
-
- tty_kref_put(tty);
- usb_serial_debug_data(debug, &port->dev, __func__,
- urb->actual_length, data);
+ if (tty) {
+ tty_insert_flip_string(tty, data,
+ urb->actual_length);
+ tty_flip_buffer_push(tty);
+
+ tty_kref_put(tty);
+ usb_serial_debug_data(debug, &port->dev,
+ __func__, urb->actual_length, data);
+ }
} else {
dev_dbg(&port->dev, "%s: empty read urb"
" received\n", __func__);
@@ -619,10 +610,10 @@ static void sierra_indat_callback(struct urb *urb)
}
/* Resubmit urb so we continue receiving */
- if (port->port.count && status != -ESHUTDOWN && status != -EPERM) {
+ if (status != -ESHUTDOWN && status != -EPERM) {
usb_mark_last_busy(port->serial->dev);
err = usb_submit_urb(urb, GFP_ATOMIC);
- if (err)
+ if (err && err != -EPERM)
dev_err(&port->dev, "resubmit read urb failed."
"(%d)\n", err);
}
@@ -681,11 +672,11 @@ static void sierra_instat_callback(struct urb *urb)
dev_dbg(&port->dev, "%s: error %d\n", __func__, status);
/* Resubmit urb so we continue receiving IRQ data */
- if (port->port.count && status != -ESHUTDOWN && status != -ENOENT) {
+ if (status != -ESHUTDOWN && status != -ENOENT) {
usb_mark_last_busy(serial->dev);
urb->dev = serial->dev;
err = usb_submit_urb(urb, GFP_ATOMIC);
- if (err)
+ if (err && err != -EPERM)
dev_err(&port->dev, "%s: resubmit intr urb "
"failed. (%d)\n", __func__, err);
}
@@ -1061,11 +1052,31 @@ static int sierra_resume(struct usb_serial *serial)
return ec ? -EIO : 0;
}
+
+static int sierra_reset_resume(struct usb_interface *intf)
+{
+ struct usb_serial *serial = usb_get_intfdata(intf);
+ dev_err(&serial->dev->dev, "%s\n", __func__);
+ return usb_serial_resume(intf);
+}
#else
#define sierra_suspend NULL
#define sierra_resume NULL
+#define sierra_reset_resume NULL
#endif
+static struct usb_driver sierra_driver = {
+ .name = "sierra",
+ .probe = usb_serial_probe,
+ .disconnect = usb_serial_disconnect,
+ .suspend = usb_serial_suspend,
+ .resume = usb_serial_resume,
+ .reset_resume = sierra_reset_resume,
+ .id_table = id_table,
+ .no_dynamic_id = 1,
+ .supports_autosuspend = 1,
+};
+
static struct usb_serial_driver sierra_device = {
.driver = {
.owner = THIS_MODULE,
diff --git a/drivers/usb/serial/spcp8x5.c b/drivers/usb/serial/spcp8x5.c
index 1e58220403d1..5d39191e7244 100644
--- a/drivers/usb/serial/spcp8x5.c
+++ b/drivers/usb/serial/spcp8x5.c
@@ -45,7 +45,7 @@ static int debug;
#define SPCP8x5_835_VID 0x04fc
#define SPCP8x5_835_PID 0x0231
-static struct usb_device_id id_table [] = {
+static const struct usb_device_id id_table[] = {
{ USB_DEVICE(SPCP8x5_PHILIPS_VID , SPCP8x5_PHILIPS_PID)},
{ USB_DEVICE(SPCP8x5_INTERMATIC_VID, SPCP8x5_INTERMATIC_PID)},
{ USB_DEVICE(SPCP8x5_835_VID, SPCP8x5_835_PID)},
@@ -609,7 +609,7 @@ static void spcp8x5_set_termios(struct tty_struct *tty,
if (i < 0)
dev_err(&port->dev, "Set UART format %#x failed (error = %d)\n",
uartdata, i);
- dbg("0x21:0x40:0:0 %d\n", i);
+ dbg("0x21:0x40:0:0 %d", i);
if (cflag & CRTSCTS) {
/* enable hardware flow control */
@@ -677,7 +677,6 @@ static void spcp8x5_read_bulk_callback(struct urb *urb)
struct tty_struct *tty;
unsigned char *data = urb->transfer_buffer;
unsigned long flags;
- int i;
int result = urb->status;
u8 status;
char tty_flag;
@@ -687,8 +686,6 @@ static void spcp8x5_read_bulk_callback(struct urb *urb)
/* check the urb status */
if (result) {
- if (!port->port.count)
- return;
if (result == -EPROTO) {
/* spcp8x5 mysteriously fails with -EPROTO */
/* reschedule the read */
@@ -726,26 +723,20 @@ static void spcp8x5_read_bulk_callback(struct urb *urb)
tty = tty_port_tty_get(&port->port);
if (tty && urb->actual_length) {
- tty_buffer_request_room(tty, urb->actual_length + 1);
/* overrun is special, not associated with a char */
if (status & UART_OVERRUN_ERROR)
tty_insert_flip_char(tty, 0, TTY_OVERRUN);
- for (i = 0; i < urb->actual_length; ++i)
- tty_insert_flip_char(tty, data[i], tty_flag);
+ tty_insert_flip_string_fixed_flag(tty, data,
+ urb->actual_length, tty_flag);
tty_flip_buffer_push(tty);
}
tty_kref_put(tty);
- /* Schedule the next read _if_ we are still open */
- if (port->port.count) {
- urb->dev = port->serial->dev;
- result = usb_submit_urb(urb , GFP_ATOMIC);
- if (result)
- dev_dbg(&port->dev, "failed submitting read urb %d\n",
- result);
- }
-
- return;
+ /* Schedule the next read */
+ urb->dev = port->serial->dev;
+ result = usb_submit_urb(urb , GFP_ATOMIC);
+ if (result)
+ dev_dbg(&port->dev, "failed submitting read urb %d\n", result);
}
/* get data from ring buffer and then write to usb bus */
diff --git a/drivers/usb/serial/symbolserial.c b/drivers/usb/serial/symbolserial.c
index b282c0f2d8e5..72398888858f 100644
--- a/drivers/usb/serial/symbolserial.c
+++ b/drivers/usb/serial/symbolserial.c
@@ -21,7 +21,7 @@
static int debug;
-static struct usb_device_id id_table[] = {
+static const struct usb_device_id id_table[] = {
{ USB_DEVICE(0x05e0, 0x0600) },
{ },
};
@@ -51,7 +51,6 @@ static void symbol_int_callback(struct urb *urb)
int status = urb->status;
struct tty_struct *tty;
int result;
- int available_room = 0;
int data_length;
dbg("%s - port %d", __func__, port->number);
@@ -89,13 +88,8 @@ static void symbol_int_callback(struct urb *urb)
*/
tty = tty_port_tty_get(&port->port);
if (tty) {
- available_room = tty_buffer_request_room(tty,
- data_length);
- if (available_room) {
- tty_insert_flip_string(tty, &data[1],
- available_room);
- tty_flip_buffer_push(tty);
- }
+ tty_insert_flip_string(tty, &data[1], data_length);
+ tty_flip_buffer_push(tty);
tty_kref_put(tty);
}
} else {
diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c
index 1e9dc8821698..0afe5c71c17e 100644
--- a/drivers/usb/serial/ti_usb_3410_5052.c
+++ b/drivers/usb/serial/ti_usb_3410_5052.c
@@ -1271,14 +1271,13 @@ static void ti_recv(struct device *dev, struct tty_struct *tty,
int cnt;
do {
- cnt = tty_buffer_request_room(tty, length);
+ cnt = tty_insert_flip_string(tty, data, length);
if (cnt < length) {
dev_err(dev, "%s - dropping data, %d bytes lost\n",
__func__, length - cnt);
if (cnt == 0)
break;
}
- tty_insert_flip_string(tty, data, cnt);
tty_flip_buffer_push(tty);
data += cnt;
length -= cnt;
diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c
index 33c85f7084f8..3873660d8217 100644
--- a/drivers/usb/serial/usb-serial.c
+++ b/drivers/usb/serial/usb-serial.c
@@ -358,10 +358,6 @@ static int serial_write(struct tty_struct *tty, const unsigned char *buf,
dbg("%s - port %d, %d byte(s)", __func__, port->number, count);
- /* count is managed under the mutex lock for the tty so cannot
- drop to zero until after the last close completes */
- WARN_ON(!port->port.count);
-
/* pass on to the driver specific version of this function */
retval = port->serial->type->write(tty, port, buf, count);
@@ -373,7 +369,6 @@ static int serial_write_room(struct tty_struct *tty)
{
struct usb_serial_port *port = tty->driver_data;
dbg("%s - port %d", __func__, port->number);
- WARN_ON(!port->port.count);
/* pass on to the driver specific version of this function */
return port->serial->type->write_room(tty);
}
@@ -381,7 +376,7 @@ static int serial_write_room(struct tty_struct *tty)
static int serial_chars_in_buffer(struct tty_struct *tty)
{
struct usb_serial_port *port = tty->driver_data;
- dbg("%s = port %d", __func__, port->number);
+ dbg("%s - port %d", __func__, port->number);
/* if the device was unplugged then any remaining characters
fell out of the connector ;) */
@@ -396,7 +391,6 @@ static void serial_throttle(struct tty_struct *tty)
struct usb_serial_port *port = tty->driver_data;
dbg("%s - port %d", __func__, port->number);
- WARN_ON(!port->port.count);
/* pass on to the driver specific version of this function */
if (port->serial->type->throttle)
port->serial->type->throttle(tty);
@@ -407,7 +401,6 @@ static void serial_unthrottle(struct tty_struct *tty)
struct usb_serial_port *port = tty->driver_data;
dbg("%s - port %d", __func__, port->number);
- WARN_ON(!port->port.count);
/* pass on to the driver specific version of this function */
if (port->serial->type->unthrottle)
port->serial->type->unthrottle(tty);
@@ -421,8 +414,6 @@ static int serial_ioctl(struct tty_struct *tty, struct file *file,
dbg("%s - port %d, cmd 0x%.4x", __func__, port->number, cmd);
- WARN_ON(!port->port.count);
-
/* pass on to the driver specific version of this function
if it is available */
if (port->serial->type->ioctl) {
@@ -437,7 +428,6 @@ static void serial_set_termios(struct tty_struct *tty, struct ktermios *old)
struct usb_serial_port *port = tty->driver_data;
dbg("%s - port %d", __func__, port->number);
- WARN_ON(!port->port.count);
/* pass on to the driver specific version of this function
if it is available */
if (port->serial->type->set_termios)
@@ -452,7 +442,6 @@ static int serial_break(struct tty_struct *tty, int break_state)
dbg("%s - port %d", __func__, port->number);
- WARN_ON(!port->port.count);
/* pass on to the driver specific version of this function
if it is available */
if (port->serial->type->break_ctl)
@@ -513,7 +502,6 @@ static int serial_tiocmget(struct tty_struct *tty, struct file *file)
dbg("%s - port %d", __func__, port->number);
- WARN_ON(!port->port.count);
if (port->serial->type->tiocmget)
return port->serial->type->tiocmget(tty, file);
return -EINVAL;
@@ -526,7 +514,6 @@ static int serial_tiocmset(struct tty_struct *tty, struct file *file,
dbg("%s - port %d", __func__, port->number);
- WARN_ON(!port->port.count);
if (port->serial->type->tiocmset)
return port->serial->type->tiocmset(tty, file, set, clear);
return -EINVAL;
diff --git a/drivers/usb/serial/usb_debug.c b/drivers/usb/serial/usb_debug.c
index 7b5bfc4edd3d..252cc2d993b2 100644
--- a/drivers/usb/serial/usb_debug.c
+++ b/drivers/usb/serial/usb_debug.c
@@ -29,7 +29,7 @@ static char USB_DEBUG_BRK[USB_DEBUG_BRK_SIZE] = {
0xff,
};
-static struct usb_device_id id_table [] = {
+static const struct usb_device_id id_table[] = {
{ USB_DEVICE(0x0525, 0x127a) },
{ },
};
diff --git a/drivers/usb/serial/visor.c b/drivers/usb/serial/visor.c
index ad1f9232292d..094942707c7d 100644
--- a/drivers/usb/serial/visor.c
+++ b/drivers/usb/serial/visor.c
@@ -368,7 +368,7 @@ static int visor_write(struct tty_struct *tty, struct usb_serial_port *port,
spin_lock_irqsave(&priv->lock, flags);
if (priv->outstanding_urbs > URB_UPPER_LIMIT) {
spin_unlock_irqrestore(&priv->lock, flags);
- dbg("%s - write limit hit\n", __func__);
+ dbg("%s - write limit hit", __func__);
return 0;
}
priv->outstanding_urbs++;
@@ -446,7 +446,7 @@ static int visor_write_room(struct tty_struct *tty)
spin_lock_irqsave(&priv->lock, flags);
if (priv->outstanding_urbs > URB_UPPER_LIMIT * 2 / 3) {
spin_unlock_irqrestore(&priv->lock, flags);
- dbg("%s - write limit hit\n", __func__);
+ dbg("%s - write limit hit", __func__);
return 0;
}
spin_unlock_irqrestore(&priv->lock, flags);
@@ -503,13 +503,9 @@ static void visor_read_bulk_callback(struct urb *urb)
if (urb->actual_length) {
tty = tty_port_tty_get(&port->port);
if (tty) {
- available_room = tty_buffer_request_room(tty,
- urb->actual_length);
- if (available_room) {
- tty_insert_flip_string(tty, data,
- available_room);
- tty_flip_buffer_push(tty);
- }
+ tty_insert_flip_string(tty, data,
+ urb->actual_length);
+ tty_flip_buffer_push(tty);
tty_kref_put(tty);
}
spin_lock(&priv->lock);
@@ -807,10 +803,14 @@ static int clie_3_5_startup(struct usb_serial *serial)
{
struct device *dev = &serial->dev->dev;
int result;
- u8 data;
+ u8 *data;
dbg("%s", __func__);
+ data = kmalloc(1, GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
/*
* Note that PEG-300 series devices expect the following two calls.
*/
@@ -818,36 +818,42 @@ static int clie_3_5_startup(struct usb_serial *serial)
/* get the config number */
result = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
USB_REQ_GET_CONFIGURATION, USB_DIR_IN,
- 0, 0, &data, 1, 3000);
+ 0, 0, data, 1, 3000);
if (result < 0) {
dev_err(dev, "%s: get config number failed: %d\n",
__func__, result);
- return result;
+ goto out;
}
if (result != 1) {
dev_err(dev, "%s: get config number bad return length: %d\n",
__func__, result);
- return -EIO;
+ result = -EIO;
+ goto out;
}
/* get the interface number */
result = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
USB_REQ_GET_INTERFACE,
USB_DIR_IN | USB_RECIP_INTERFACE,
- 0, 0, &data, 1, 3000);
+ 0, 0, data, 1, 3000);
if (result < 0) {
dev_err(dev, "%s: get interface number failed: %d\n",
__func__, result);
- return result;
+ goto out;
}
if (result != 1) {
dev_err(dev,
"%s: get interface number bad return length: %d\n",
__func__, result);
- return -EIO;
+ result = -EIO;
+ goto out;
}
- return generic_startup(serial);
+ result = generic_startup(serial);
+out:
+ kfree(data);
+
+ return result;
}
static int treo_attach(struct usb_serial *serial)
diff --git a/drivers/usb/serial/vivopay-serial.c b/drivers/usb/serial/vivopay-serial.c
new file mode 100644
index 000000000000..f719d00972fc
--- /dev/null
+++ b/drivers/usb/serial/vivopay-serial.c
@@ -0,0 +1,76 @@
+/*
+ * Copyright (C) 2001-2005 Greg Kroah-Hartman (greg@kroah.com)
+ * Copyright (C) 2009 Outpost Embedded, LLC
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/tty.h>
+#include <linux/module.h>
+#include <linux/usb.h>
+#include <linux/usb/serial.h>
+
+
+#define DRIVER_VERSION "v1.0"
+#define DRIVER_DESC "ViVOpay USB Serial Driver"
+
+#define VIVOPAY_VENDOR_ID 0x1d5f
+
+
+static struct usb_device_id id_table [] = {
+ /* ViVOpay 8800 */
+ { USB_DEVICE(VIVOPAY_VENDOR_ID, 0x1004) },
+ { },
+};
+
+MODULE_DEVICE_TABLE(usb, id_table);
+
+static struct usb_driver vivopay_serial_driver = {
+ .name = "vivopay-serial",
+ .probe = usb_serial_probe,
+ .disconnect = usb_serial_disconnect,
+ .id_table = id_table,
+ .no_dynamic_id = 1,
+};
+
+static struct usb_serial_driver vivopay_serial_device = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "vivopay-serial",
+ },
+ .id_table = id_table,
+ .usb_driver = &vivopay_serial_driver,
+ .num_ports = 1,
+};
+
+static int __init vivopay_serial_init(void)
+{
+ int retval;
+ retval = usb_serial_register(&vivopay_serial_device);
+ if (retval)
+ goto failed_usb_serial_register;
+ retval = usb_register(&vivopay_serial_driver);
+ if (retval)
+ goto failed_usb_register;
+ printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
+ DRIVER_DESC "\n");
+ return 0;
+failed_usb_register:
+ usb_serial_deregister(&vivopay_serial_device);
+failed_usb_serial_register:
+ return retval;
+}
+
+static void __exit vivopay_serial_exit(void)
+{
+ usb_deregister(&vivopay_serial_driver);
+ usb_serial_deregister(&vivopay_serial_device);
+}
+
+module_init(vivopay_serial_init);
+module_exit(vivopay_serial_exit);
+
+MODULE_AUTHOR("Forest Bond <forest.bond@outpostembedded.com>");
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_VERSION(DRIVER_VERSION);
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/serial/whiteheat.c b/drivers/usb/serial/whiteheat.c
index 1093d2eb046a..12ed8209ca72 100644
--- a/drivers/usb/serial/whiteheat.c
+++ b/drivers/usb/serial/whiteheat.c
@@ -111,17 +111,17 @@ static int debug;
separate ID tables, and then a third table that combines them
just for the purpose of exporting the autoloading information.
*/
-static struct usb_device_id id_table_std [] = {
+static const struct usb_device_id id_table_std[] = {
{ USB_DEVICE(CONNECT_TECH_VENDOR_ID, CONNECT_TECH_WHITE_HEAT_ID) },
{ } /* Terminating entry */
};
-static struct usb_device_id id_table_prerenumeration [] = {
+static const struct usb_device_id id_table_prerenumeration[] = {
{ USB_DEVICE(CONNECT_TECH_VENDOR_ID, CONNECT_TECH_FAKE_WHITE_HEAT_ID) },
{ } /* Terminating entry */
};
-static struct usb_device_id id_table_combined [] = {
+static const struct usb_device_id id_table_combined[] = {
{ USB_DEVICE(CONNECT_TECH_VENDOR_ID, CONNECT_TECH_WHITE_HEAT_ID) },
{ USB_DEVICE(CONNECT_TECH_VENDOR_ID, CONNECT_TECH_FAKE_WHITE_HEAT_ID) },
{ } /* Terminating entry */
@@ -1492,21 +1492,9 @@ static void rx_data_softint(struct work_struct *work)
wrap = list_entry(tmp, struct whiteheat_urb_wrap, list);
urb = wrap->urb;
- if (tty && urb->actual_length) {
- int len = tty_buffer_request_room(tty,
- urb->actual_length);
- /* This stuff can go away now I suspect */
- if (unlikely(len < urb->actual_length)) {
- spin_lock_irqsave(&info->lock, flags);
- list_add(tmp, &info->rx_urb_q);
- spin_unlock_irqrestore(&info->lock, flags);
- tty_flip_buffer_push(tty);
- schedule_work(&info->rx_work);
- goto out;
- }
- tty_insert_flip_string(tty, urb->transfer_buffer, len);
- sent += len;
- }
+ if (tty && urb->actual_length)
+ sent += tty_insert_flip_string(tty,
+ urb->transfer_buffer, urb->actual_length);
urb->dev = port->serial->dev;
result = usb_submit_urb(urb, GFP_ATOMIC);