summaryrefslogtreecommitdiff
path: root/drivers/usb/serial
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/serial')
-rw-r--r--drivers/usb/serial/cyberjack.c7
-rw-r--r--drivers/usb/serial/cypress_m8.c4
-rw-r--r--drivers/usb/serial/empeg.c6
-rw-r--r--drivers/usb/serial/ftdi_sio.c1
-rw-r--r--drivers/usb/serial/ftdi_sio.h7
-rw-r--r--drivers/usb/serial/garmin_gps.c8
-rw-r--r--drivers/usb/serial/generic.c6
-rw-r--r--drivers/usb/serial/io_edgeport.c8
-rw-r--r--drivers/usb/serial/io_ti.c8
-rw-r--r--drivers/usb/serial/ipaq.c6
-rw-r--r--drivers/usb/serial/ipw.c3
-rw-r--r--drivers/usb/serial/iuu_phoenix.c1
-rw-r--r--drivers/usb/serial/kobil_sct.c6
-rw-r--r--drivers/usb/serial/mos7720.c7
-rw-r--r--drivers/usb/serial/mos7840.c43
-rw-r--r--drivers/usb/serial/moto_modem.c1
-rw-r--r--drivers/usb/serial/opticon.c8
-rw-r--r--drivers/usb/serial/option.c8
-rw-r--r--drivers/usb/serial/qcserial.c21
-rw-r--r--drivers/usb/serial/sierra.c24
-rw-r--r--drivers/usb/serial/ti_usb_3410_5052.c40
-rw-r--r--drivers/usb/serial/usb-serial.c104
-rw-r--r--drivers/usb/serial/visor.c8
23 files changed, 161 insertions, 174 deletions
diff --git a/drivers/usb/serial/cyberjack.c b/drivers/usb/serial/cyberjack.c
index 858bdd038fbc..dd501bb63ed6 100644
--- a/drivers/usb/serial/cyberjack.c
+++ b/drivers/usb/serial/cyberjack.c
@@ -175,13 +175,6 @@ static int cyberjack_open(struct tty_struct *tty,
dbg("%s - usb_clear_halt", __func__);
usb_clear_halt(port->serial->dev, port->write_urb->pipe);
- /* force low_latency on so that our tty_push actually forces
- * the data through, otherwise it is scheduled, and with high
- * data rates (like with OHCI) data can get lost.
- */
- if (tty)
- tty->low_latency = 1;
-
priv = usb_get_serial_port_data(port);
spin_lock_irqsave(&priv->lock, flags);
priv->rdtodo = 0;
diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c
index eae4740d448c..e568710b263f 100644
--- a/drivers/usb/serial/cypress_m8.c
+++ b/drivers/usb/serial/cypress_m8.c
@@ -656,10 +656,6 @@ static int cypress_open(struct tty_struct *tty,
priv->rx_flags = 0;
spin_unlock_irqrestore(&priv->lock, flags);
- /* setting to zero could cause data loss */
- if (tty)
- tty->low_latency = 1;
-
/* raise both lines and set termios */
spin_lock_irqsave(&priv->lock, flags);
priv->line_control = CONTROL_DTR | CONTROL_RTS;
diff --git a/drivers/usb/serial/empeg.c b/drivers/usb/serial/empeg.c
index 8a69cce40b6d..c709ec474a80 100644
--- a/drivers/usb/serial/empeg.c
+++ b/drivers/usb/serial/empeg.c
@@ -478,12 +478,6 @@ static void empeg_set_termios(struct tty_struct *tty,
termios->c_cflag
|= CS8; /* character size 8 bits */
- /*
- * Force low_latency on; otherwise the pushes are scheduled;
- * this is bad as it opens up the possibility of dropping bytes
- * on the floor. We don't want to drop bytes on the floor. :)
- */
- tty->low_latency = 1;
tty_encode_baud_rate(tty, 115200, 115200);
}
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index dcc87aaa8628..8100f1d25904 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -668,6 +668,7 @@ static struct usb_device_id id_table_combined [] = {
{ USB_DEVICE(DE_VID, WHT_PID) },
{ USB_DEVICE(ADI_VID, ADI_GNICE_PID),
.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
+ { USB_DEVICE(JETI_VID, JETI_SPC1201_PID) },
{ }, /* Optional parameter entry */
{ } /* Terminating entry */
};
diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h
index daaf63db0b50..c09f658a448b 100644
--- a/drivers/usb/serial/ftdi_sio.h
+++ b/drivers/usb/serial/ftdi_sio.h
@@ -913,6 +913,13 @@
#define ADI_GNICE_PID 0xF000
/*
+ * JETI SPECTROMETER SPECBOS 1201
+ * http://www.jeti.com/products/sys/scb/scb1201.php
+ */
+#define JETI_VID 0x0c6c
+#define JETI_SPC1201_PID 0x04b2
+
+/*
* BmRequestType: 1100 0000b
* bRequest: FTDI_E2_READ
* wValue: 0
diff --git a/drivers/usb/serial/garmin_gps.c b/drivers/usb/serial/garmin_gps.c
index a26a0e2cdb4a..586d30ff450b 100644
--- a/drivers/usb/serial/garmin_gps.c
+++ b/drivers/usb/serial/garmin_gps.c
@@ -973,14 +973,6 @@ static int garmin_open(struct tty_struct *tty,
dbg("%s - port %d", __func__, port->number);
- /*
- * Force low_latency on so that our tty_push actually forces the data
- * through, otherwise it is scheduled, and with high data rates (like
- * with OHCI) data can get lost.
- */
- if (tty)
- tty->low_latency = 1;
-
spin_lock_irqsave(&garmin_data_p->lock, flags);
garmin_data_p->mode = initial_mode;
garmin_data_p->count = 0;
diff --git a/drivers/usb/serial/generic.c b/drivers/usb/serial/generic.c
index 9d57cace3731..4cec9906ccf3 100644
--- a/drivers/usb/serial/generic.c
+++ b/drivers/usb/serial/generic.c
@@ -122,12 +122,6 @@ int usb_serial_generic_open(struct tty_struct *tty,
dbg("%s - port %d", __func__, port->number);
- /* force low_latency on so that our tty_push actually forces the data
- through, otherwise it is scheduled, and with high data rates (like
- with OHCI) data can get lost. */
- if (tty)
- tty->low_latency = 1;
-
/* clear the throttle flags */
spin_lock_irqsave(&port->lock, flags);
port->throttled = 0;
diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c
index e85c8c0d1ad9..fb4a73d090f6 100644
--- a/drivers/usb/serial/io_edgeport.c
+++ b/drivers/usb/serial/io_edgeport.c
@@ -193,8 +193,6 @@ static const struct divisor_table_entry divisor_table[] = {
/* local variables */
static int debug;
-static int low_latency = 1; /* tty low latency flag, on by default */
-
static atomic_t CmdUrbs; /* Number of outstanding Command Write Urbs */
@@ -867,9 +865,6 @@ static int edge_open(struct tty_struct *tty,
if (edge_port == NULL)
return -ENODEV;
- if (tty)
- tty->low_latency = low_latency;
-
/* see if we've set up our endpoint info yet (can't set it up
in edge_startup as the structures were not set up at that time.) */
serial = port->serial;
@@ -3299,6 +3294,3 @@ MODULE_FIRMWARE("edgeport/down2.fw");
module_param(debug, bool, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(debug, "Debug enabled or not");
-
-module_param(low_latency, bool, S_IRUGO | S_IWUSR);
-MODULE_PARM_DESC(low_latency, "Low latency enabled or not");
diff --git a/drivers/usb/serial/io_ti.c b/drivers/usb/serial/io_ti.c
index c3cdd00ddc41..513b25e044c1 100644
--- a/drivers/usb/serial/io_ti.c
+++ b/drivers/usb/serial/io_ti.c
@@ -76,7 +76,6 @@ struct edgeport_uart_buf_desc {
#define EDGE_READ_URB_STOPPING 1
#define EDGE_READ_URB_STOPPED 2
-#define EDGE_LOW_LATENCY 1
#define EDGE_CLOSING_WAIT 4000 /* in .01 sec */
#define EDGE_OUT_BUF_SIZE 1024
@@ -232,7 +231,6 @@ static unsigned short OperationalBuildNumber;
static int debug;
-static int low_latency = EDGE_LOW_LATENCY;
static int closing_wait = EDGE_CLOSING_WAIT;
static int ignore_cpu_rev;
static int default_uart_mode; /* RS232 */
@@ -1850,9 +1848,6 @@ static int edge_open(struct tty_struct *tty,
if (edge_port == NULL)
return -ENODEV;
- if (tty)
- tty->low_latency = low_latency;
-
port_number = port->number - port->serial->minor;
switch (port_number) {
case 0:
@@ -3008,9 +3003,6 @@ MODULE_FIRMWARE("edgeport/down3.bin");
module_param(debug, bool, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(debug, "Debug enabled or not");
-module_param(low_latency, bool, S_IRUGO | S_IWUSR);
-MODULE_PARM_DESC(low_latency, "Low latency enabled or not");
-
module_param(closing_wait, int, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(closing_wait, "Maximum wait for data to drain, in .01 secs");
diff --git a/drivers/usb/serial/ipaq.c b/drivers/usb/serial/ipaq.c
index ef92095b0732..cd62825a9ac3 100644
--- a/drivers/usb/serial/ipaq.c
+++ b/drivers/usb/serial/ipaq.c
@@ -631,13 +631,7 @@ static int ipaq_open(struct tty_struct *tty,
priv->free_len += PACKET_SIZE;
}
- /*
- * Force low latency on. This will immediately push data to the line
- * discipline instead of queueing.
- */
-
if (tty) {
- tty->low_latency = 1;
/* FIXME: These two are bogus */
tty->raw = 1;
tty->real_raw = 1;
diff --git a/drivers/usb/serial/ipw.c b/drivers/usb/serial/ipw.c
index f530032ed93d..da2a2b46644a 100644
--- a/drivers/usb/serial/ipw.c
+++ b/drivers/usb/serial/ipw.c
@@ -207,9 +207,6 @@ static int ipw_open(struct tty_struct *tty,
if (!buf_flow_init)
return -ENOMEM;
- if (tty)
- tty->low_latency = 1;
-
/* --1: Tell the modem to initialize (we think) From sniffs this is
* always the first thing that gets sent to the modem during
* opening of the device */
diff --git a/drivers/usb/serial/iuu_phoenix.c b/drivers/usb/serial/iuu_phoenix.c
index 2314c6ae4fc2..4473d442b2aa 100644
--- a/drivers/usb/serial/iuu_phoenix.c
+++ b/drivers/usb/serial/iuu_phoenix.c
@@ -1051,7 +1051,6 @@ static int iuu_open(struct tty_struct *tty,
tty->termios->c_oflag = 0;
tty->termios->c_iflag = 0;
priv->termios_initialized = 1;
- tty->low_latency = 1;
priv->poll = 0;
}
spin_unlock_irqrestore(&priv->lock, flags);
diff --git a/drivers/usb/serial/kobil_sct.c b/drivers/usb/serial/kobil_sct.c
index 6286baad9392..c148544953b3 100644
--- a/drivers/usb/serial/kobil_sct.c
+++ b/drivers/usb/serial/kobil_sct.c
@@ -231,13 +231,7 @@ static int kobil_open(struct tty_struct *tty,
/* someone sets the dev to 0 if the close method has been called */
port->interrupt_in_urb->dev = port->serial->dev;
-
- /* force low_latency on so that our tty_push actually forces
- * the data through, otherwise it is scheduled, and with high
- * data rates (like with OHCI) data can get lost.
- */
if (tty) {
- tty->low_latency = 1;
/* Default to echo off and other sane device settings */
tty->termios->c_lflag = 0;
diff --git a/drivers/usb/serial/mos7720.c b/drivers/usb/serial/mos7720.c
index e772cc0a97fd..24e3b5d4b4d4 100644
--- a/drivers/usb/serial/mos7720.c
+++ b/drivers/usb/serial/mos7720.c
@@ -446,13 +446,6 @@ static int mos7720_open(struct tty_struct *tty,
data = 0x0c;
send_mos_cmd(serial, MOS_WRITE, port_number, 0x01, &data);
- /* force low_latency on so that our tty_push actually forces *
- * the data through,otherwise it is scheduled, and with *
- * high data rates (like with OHCI) data can get lost. */
-
- if (tty)
- tty->low_latency = 1;
-
/* see if we've set up our endpoint info yet *
* (can't set it up in mos7720_startup as the *
* structures were not set up at that time.) */
diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c
index 2c20e88a91b3..84fb1dcd30dc 100644
--- a/drivers/usb/serial/mos7840.c
+++ b/drivers/usb/serial/mos7840.c
@@ -38,7 +38,7 @@
/*
* Version Information
*/
-#define DRIVER_VERSION "1.3.1"
+#define DRIVER_VERSION "1.3.2"
#define DRIVER_DESC "Moschip 7840/7820 USB Serial Driver"
/*
@@ -123,6 +123,11 @@
#define BANDB_DEVICE_ID_USOPTL4_4 0xAC44
#define BANDB_DEVICE_ID_USOPTL4_2 0xAC42
+/* This driver also supports the ATEN UC2324 device since it is mos7840 based
+ * - if I knew the device id it would also support the ATEN UC2322 */
+#define USB_VENDOR_ID_ATENINTL 0x0557
+#define ATENINTL_DEVICE_ID_UC2324 0x2011
+
/* Interrupt Routine Defines */
#define SERIAL_IIR_RLS 0x06
@@ -170,6 +175,7 @@ static struct usb_device_id moschip_port_id_table[] = {
{USB_DEVICE(USB_VENDOR_ID_MOSCHIP, MOSCHIP_DEVICE_ID_7820)},
{USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL4_4)},
{USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL4_2)},
+ {USB_DEVICE(USB_VENDOR_ID_ATENINTL, ATENINTL_DEVICE_ID_UC2324)},
{} /* terminating entry */
};
@@ -178,6 +184,7 @@ static __devinitdata struct usb_device_id moschip_id_table_combined[] = {
{USB_DEVICE(USB_VENDOR_ID_MOSCHIP, MOSCHIP_DEVICE_ID_7820)},
{USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL4_4)},
{USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL4_2)},
+ {USB_DEVICE(USB_VENDOR_ID_ATENINTL, ATENINTL_DEVICE_ID_UC2324)},
{} /* terminating entry */
};
@@ -1000,12 +1007,6 @@ static int mos7840_open(struct tty_struct *tty,
status = mos7840_set_reg_sync(port, mos7840_port->ControlRegOffset,
Data);
- /* force low_latency on so that our tty_push actually forces *
- * the data through,otherwise it is scheduled, and with *
- * high data rates (like with OHCI) data can get lost. */
- if (tty)
- tty->low_latency = 1;
-
/* Check to see if we've set up our endpoint info yet *
* (can't set it up in mos7840_startup as the structures *
* were not set up at that time.) */
@@ -2477,9 +2478,14 @@ static int mos7840_startup(struct usb_serial *serial)
mos7840_set_port_private(serial->port[i], mos7840_port);
spin_lock_init(&mos7840_port->pool_lock);
- mos7840_port->port_num = ((serial->port[i]->number -
- (serial->port[i]->serial->minor)) +
- 1);
+ /* minor is not initialised until later by
+ * usb-serial.c:get_free_serial() and cannot therefore be used
+ * to index device instances */
+ mos7840_port->port_num = i + 1;
+ dbg ("serial->port[i]->number = %d", serial->port[i]->number);
+ dbg ("serial->port[i]->serial->minor = %d", serial->port[i]->serial->minor);
+ dbg ("mos7840_port->port_num = %d", mos7840_port->port_num);
+ dbg ("serial->minor = %d", serial->minor);
if (mos7840_port->port_num == 1) {
mos7840_port->SpRegOffset = 0x0;
@@ -2690,13 +2696,16 @@ static void mos7840_shutdown(struct usb_serial *serial)
for (i = 0; i < serial->num_ports; ++i) {
mos7840_port = mos7840_get_port_private(serial->port[i]);
- spin_lock_irqsave(&mos7840_port->pool_lock, flags);
- mos7840_port->zombie = 1;
- spin_unlock_irqrestore(&mos7840_port->pool_lock, flags);
- usb_kill_urb(mos7840_port->control_urb);
- kfree(mos7840_port->ctrl_buf);
- kfree(mos7840_port->dr);
- kfree(mos7840_port);
+ dbg ("mos7840_port %d = %p", i, mos7840_port);
+ if (mos7840_port) {
+ spin_lock_irqsave(&mos7840_port->pool_lock, flags);
+ mos7840_port->zombie = 1;
+ spin_unlock_irqrestore(&mos7840_port->pool_lock, flags);
+ usb_kill_urb(mos7840_port->control_urb);
+ kfree(mos7840_port->ctrl_buf);
+ kfree(mos7840_port->dr);
+ kfree(mos7840_port);
+ }
mos7840_set_port_private(serial->port[i], NULL);
}
diff --git a/drivers/usb/serial/moto_modem.c b/drivers/usb/serial/moto_modem.c
index 2e8e05462ef7..b66b71ccd12b 100644
--- a/drivers/usb/serial/moto_modem.c
+++ b/drivers/usb/serial/moto_modem.c
@@ -25,6 +25,7 @@ static struct usb_device_id id_table [] = {
{ USB_DEVICE(0x05c6, 0x3197) }, /* unknown Motorola phone */
{ USB_DEVICE(0x0c44, 0x0022) }, /* unknown Mororola phone */
{ USB_DEVICE(0x22b8, 0x2a64) }, /* Motorola KRZR K1m */
+ { USB_DEVICE(0x22b8, 0x2c64) }, /* Motorola V950 phone */
{ },
};
MODULE_DEVICE_TABLE(usb, id_table);
diff --git a/drivers/usb/serial/opticon.c b/drivers/usb/serial/opticon.c
index 839583dc8b6a..b500ad10b758 100644
--- a/drivers/usb/serial/opticon.c
+++ b/drivers/usb/serial/opticon.c
@@ -159,14 +159,6 @@ static int opticon_open(struct tty_struct *tty, struct usb_serial_port *port,
priv->port = port;
spin_unlock_irqrestore(&priv->lock, flags);
- /*
- * Force low_latency on so that our tty_push actually forces the data
- * through, otherwise it is scheduled, and with high data rates (like
- * with OHCI) data can get lost.
- */
- if (tty)
- tty->low_latency = 1;
-
/* Start reading from the device */
usb_fill_bulk_urb(priv->bulk_read_urb, priv->udev,
usb_rcvbulkpipe(priv->udev,
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index d560c0b54e6e..7817b82889ca 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -300,6 +300,10 @@ static int option_resume(struct usb_serial *serial);
#define BENQ_VENDOR_ID 0x04a5
#define BENQ_PRODUCT_H10 0x4068
+#define DLINK_VENDOR_ID 0x1186
+#define DLINK_PRODUCT_DWM_652 0x3e04
+
+
static struct usb_device_id option_ids[] = {
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COLT) },
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_RICOLA) },
@@ -516,6 +520,7 @@ static struct usb_device_id option_ids[] = {
{ USB_DEVICE(ZTE_VENDOR_ID, ZTE_PRODUCT_MF628) },
{ USB_DEVICE(ZTE_VENDOR_ID, ZTE_PRODUCT_CDMA_TECH) },
{ USB_DEVICE(BENQ_VENDOR_ID, BENQ_PRODUCT_H10) },
+ { USB_DEVICE(DLINK_VENDOR_ID, DLINK_PRODUCT_DWM_652) },
{ USB_DEVICE(0x1da5, 0x4515) }, /* BenQ H20 */
{ } /* Terminating entry */
};
@@ -931,9 +936,6 @@ static int option_open(struct tty_struct *tty,
usb_pipeout(urb->pipe), 0); */
}
- if (tty)
- tty->low_latency = 1;
-
option_send_setup(tty, port);
return 0;
diff --git a/drivers/usb/serial/qcserial.c b/drivers/usb/serial/qcserial.c
index e6d6b0c17fd9..7528b8d57f1c 100644
--- a/drivers/usb/serial/qcserial.c
+++ b/drivers/usb/serial/qcserial.c
@@ -26,6 +26,27 @@ static struct usb_device_id id_table[] = {
{USB_DEVICE(0x05c6, 0x9212)}, /* Acer Gobi Modem Device */
{USB_DEVICE(0x03f0, 0x1f1d)}, /* HP un2400 Gobi Modem Device */
{USB_DEVICE(0x03f0, 0x201d)}, /* HP un2400 Gobi QDL Device */
+ {USB_DEVICE(0x04da, 0x250d)}, /* Panasonic Gobi Modem device */
+ {USB_DEVICE(0x04da, 0x250c)}, /* Panasonic Gobi QDL device */
+ {USB_DEVICE(0x413c, 0x8172)}, /* Dell Gobi Modem device */
+ {USB_DEVICE(0x413c, 0x8171)}, /* Dell Gobi QDL device */
+ {USB_DEVICE(0x1410, 0xa001)}, /* Novatel Gobi Modem device */
+ {USB_DEVICE(0x1410, 0xa008)}, /* Novatel Gobi QDL device */
+ {USB_DEVICE(0x0b05, 0x1776)}, /* Asus Gobi Modem device */
+ {USB_DEVICE(0x0b05, 0x1774)}, /* Asus Gobi QDL device */
+ {USB_DEVICE(0x19d2, 0xfff3)}, /* ONDA Gobi Modem device */
+ {USB_DEVICE(0x19d2, 0xfff2)}, /* ONDA Gobi QDL device */
+ {USB_DEVICE(0x1557, 0x0a80)}, /* OQO Gobi QDL device */
+ {USB_DEVICE(0x05c6, 0x9001)}, /* Generic Gobi Modem device */
+ {USB_DEVICE(0x05c6, 0x9002)}, /* Generic Gobi Modem device */
+ {USB_DEVICE(0x05c6, 0x9202)}, /* Generic Gobi Modem device */
+ {USB_DEVICE(0x05c6, 0x9203)}, /* Generic Gobi Modem device */
+ {USB_DEVICE(0x05c6, 0x9222)}, /* Generic Gobi Modem device */
+ {USB_DEVICE(0x05c6, 0x9008)}, /* Generic Gobi QDL device */
+ {USB_DEVICE(0x05c6, 0x9201)}, /* Generic Gobi QDL device */
+ {USB_DEVICE(0x05c6, 0x9221)}, /* Generic Gobi QDL device */
+ {USB_DEVICE(0x05c6, 0x9231)}, /* Generic Gobi QDL device */
+ {USB_DEVICE(0x1f45, 0x0001)}, /* Unknown Gobi QDL device */
{ } /* Terminating entry */
};
MODULE_DEVICE_TABLE(usb, id_table);
diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c
index d9bf9a5c20ec..913225c61610 100644
--- a/drivers/usb/serial/sierra.c
+++ b/drivers/usb/serial/sierra.c
@@ -14,7 +14,7 @@
Whom based his on the Keyspan driver by Hugh Blemings <hugh@blemings.org>
*/
-#define DRIVER_VERSION "v.1.3.2"
+#define DRIVER_VERSION "v.1.3.3"
#define DRIVER_AUTHOR "Kevin Lloyd <klloyd@sierrawireless.com>"
#define DRIVER_DESC "USB Driver for Sierra Wireless USB modems"
@@ -259,9 +259,21 @@ static int sierra_send_setup(struct tty_struct *tty,
val |= 0x02;
/* If composite device then properly report interface */
- if (serial->num_ports == 1)
+ if (serial->num_ports == 1) {
interface = sierra_calc_interface(serial);
+ /* Control message is sent only to interfaces with
+ * interrupt_in endpoints
+ */
+ if (port->interrupt_in_urb) {
+ /* send control message */
+ return usb_control_msg(serial->dev,
+ usb_rcvctrlpipe(serial->dev, 0),
+ 0x22, 0x21, val, interface,
+ NULL, 0, USB_CTRL_SET_TIMEOUT);
+ }
+ }
+
/* Otherwise the need to do non-composite mapping */
else {
if (port->bulk_out_endpointAddress == 2)
@@ -270,12 +282,13 @@ static int sierra_send_setup(struct tty_struct *tty,
interface = 1;
else if (port->bulk_out_endpointAddress == 5)
interface = 2;
- }
- return usb_control_msg(serial->dev,
+ return usb_control_msg(serial->dev,
usb_rcvctrlpipe(serial->dev, 0),
0x22, 0x21, val, interface,
NULL, 0, USB_CTRL_SET_TIMEOUT);
+
+ }
}
return 0;
@@ -585,9 +598,6 @@ static int sierra_open(struct tty_struct *tty,
}
}
- if (tty)
- tty->low_latency = 1;
-
sierra_send_setup(tty, port);
/* start up the interrupt endpoint if we have one */
diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c
index 2620bf6fe5e1..0a64bac306ee 100644
--- a/drivers/usb/serial/ti_usb_3410_5052.c
+++ b/drivers/usb/serial/ti_usb_3410_5052.c
@@ -50,11 +50,10 @@
#define TI_TRANSFER_TIMEOUT 2
-#define TI_DEFAULT_LOW_LATENCY 0
#define TI_DEFAULT_CLOSING_WAIT 4000 /* in .01 secs */
/* supported setserial flags */
-#define TI_SET_SERIAL_FLAGS (ASYNC_LOW_LATENCY)
+#define TI_SET_SERIAL_FLAGS 0
/* read urb states */
#define TI_READ_URB_RUNNING 0
@@ -161,7 +160,6 @@ static int ti_buf_get(struct circ_buf *cb, char *buf, int count);
/* module parameters */
static int debug;
-static int low_latency = TI_DEFAULT_LOW_LATENCY;
static int closing_wait = TI_DEFAULT_CLOSING_WAIT;
static ushort vendor_3410[TI_EXTRA_VID_PID_COUNT];
static unsigned int vendor_3410_count;
@@ -296,10 +294,6 @@ MODULE_FIRMWARE("mts_edge.fw");
module_param(debug, bool, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(debug, "Enable debugging, 0=no, 1=yes");
-module_param(low_latency, bool, S_IRUGO | S_IWUSR);
-MODULE_PARM_DESC(low_latency,
- "TTY low_latency flag, 0=off, 1=on, default is off");
-
module_param(closing_wait, int, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(closing_wait,
"Maximum wait for data to drain in close, in .01 secs, default is 4000");
@@ -448,7 +442,6 @@ static int ti_startup(struct usb_serial *serial)
spin_lock_init(&tport->tp_lock);
tport->tp_uart_base_addr = (i == 0 ?
TI_UART1_BASE_ADDR : TI_UART2_BASE_ADDR);
- tport->tp_flags = low_latency ? ASYNC_LOW_LATENCY : 0;
tport->tp_closing_wait = closing_wait;
init_waitqueue_head(&tport->tp_msr_wait);
init_waitqueue_head(&tport->tp_write_wait);
@@ -528,10 +521,6 @@ static int ti_open(struct tty_struct *tty,
if (mutex_lock_interruptible(&tdev->td_open_close_lock))
return -ERESTARTSYS;
- if (tty)
- tty->low_latency =
- (tport->tp_flags & ASYNC_LOW_LATENCY) ? 1 : 0;
-
port_number = port->number - port->serial->minor;
memset(&(tport->tp_icount), 0x00, sizeof(tport->tp_icount));
@@ -1215,20 +1204,22 @@ static void ti_bulk_in_callback(struct urb *urb)
}
tty = tty_port_tty_get(&port->port);
- if (tty && urb->actual_length) {
- usb_serial_debug_data(debug, dev, __func__,
- urb->actual_length, urb->transfer_buffer);
-
- if (!tport->tp_is_open)
- dbg("%s - port closed, dropping data", __func__);
- else
- ti_recv(&urb->dev->dev, tty,
+ if (tty) {
+ if (urb->actual_length) {
+ usb_serial_debug_data(debug, dev, __func__,
+ urb->actual_length, urb->transfer_buffer);
+
+ if (!tport->tp_is_open)
+ dbg("%s - port closed, dropping data",
+ __func__);
+ else
+ ti_recv(&urb->dev->dev, tty,
urb->transfer_buffer,
urb->actual_length);
-
- spin_lock(&tport->tp_lock);
- tport->tp_icount.rx += urb->actual_length;
- spin_unlock(&tport->tp_lock);
+ spin_lock(&tport->tp_lock);
+ tport->tp_icount.rx += urb->actual_length;
+ spin_unlock(&tport->tp_lock);
+ }
tty_kref_put(tty);
}
@@ -1452,7 +1443,6 @@ static int ti_set_serial_info(struct tty_struct *tty, struct ti_port *tport,
return -EFAULT;
tport->tp_flags = new_serial.flags & TI_SET_SERIAL_FLAGS;
- tty->low_latency = (tport->tp_flags & ASYNC_LOW_LATENCY) ? 1 : 0;
tport->tp_closing_wait = new_serial.closing_wait;
return 0;
diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c
index 2a70563bbee1..0a566eea49c0 100644
--- a/drivers/usb/serial/usb-serial.c
+++ b/drivers/usb/serial/usb-serial.c
@@ -137,22 +137,10 @@ static void destroy_serial(struct kref *kref)
dbg("%s - %s", __func__, serial->type->description);
- serial->type->shutdown(serial);
-
/* return the minor range that this device had */
if (serial->minor != SERIAL_TTY_NO_MINOR)
return_serial(serial);
- for (i = 0; i < serial->num_ports; ++i)
- serial->port[i]->port.count = 0;
-
- /* the ports are cleaned up and released in port_release() */
- for (i = 0; i < serial->num_ports; ++i)
- if (serial->port[i]->dev.parent != NULL) {
- device_unregister(&serial->port[i]->dev);
- serial->port[i] = NULL;
- }
-
/* If this is a "fake" port, we have to clean it up here, as it will
* not get cleaned up in port_release() as it was never registered with
* the driver core */
@@ -187,7 +175,7 @@ static int serial_open (struct tty_struct *tty, struct file *filp)
struct usb_serial *serial;
struct usb_serial_port *port;
unsigned int portNumber;
- int retval;
+ int retval = 0;
dbg("%s", __func__);
@@ -198,21 +186,24 @@ static int serial_open (struct tty_struct *tty, struct file *filp)
return -ENODEV;
}
+ mutex_lock(&serial->disc_mutex);
portNumber = tty->index - serial->minor;
port = serial->port[portNumber];
- if (!port) {
- retval = -ENODEV;
- goto bailout_kref_put;
- }
-
- if (port->serial->disconnected) {
+ if (!port || serial->disconnected)
retval = -ENODEV;
- goto bailout_kref_put;
- }
+ else
+ get_device(&port->dev);
+ /*
+ * Note: Our locking order requirement does not allow port->mutex
+ * to be acquired while serial->disc_mutex is held.
+ */
+ mutex_unlock(&serial->disc_mutex);
+ if (retval)
+ goto bailout_serial_put;
if (mutex_lock_interruptible(&port->mutex)) {
retval = -ERESTARTSYS;
- goto bailout_kref_put;
+ goto bailout_port_put;
}
++port->port.count;
@@ -232,14 +223,20 @@ static int serial_open (struct tty_struct *tty, struct file *filp)
goto bailout_mutex_unlock;
}
- retval = usb_autopm_get_interface(serial->interface);
+ mutex_lock(&serial->disc_mutex);
+ if (serial->disconnected)
+ retval = -ENODEV;
+ else
+ retval = usb_autopm_get_interface(serial->interface);
if (retval)
goto bailout_module_put;
+
/* only call the device specific open if this
* is the first time the port is opened */
retval = serial->type->open(tty, port, filp);
if (retval)
goto bailout_interface_put;
+ mutex_unlock(&serial->disc_mutex);
}
mutex_unlock(&port->mutex);
@@ -248,13 +245,16 @@ static int serial_open (struct tty_struct *tty, struct file *filp)
bailout_interface_put:
usb_autopm_put_interface(serial->interface);
bailout_module_put:
+ mutex_unlock(&serial->disc_mutex);
module_put(serial->type->driver.owner);
bailout_mutex_unlock:
port->port.count = 0;
tty->driver_data = NULL;
tty_port_tty_set(&port->port, NULL);
mutex_unlock(&port->mutex);
-bailout_kref_put:
+bailout_port_put:
+ put_device(&port->dev);
+bailout_serial_put:
usb_serial_put(serial);
return retval;
}
@@ -262,6 +262,9 @@ bailout_kref_put:
static void serial_close(struct tty_struct *tty, struct file *filp)
{
struct usb_serial_port *port = tty->driver_data;
+ struct usb_serial *serial;
+ struct module *owner;
+ int count;
if (!port)
return;
@@ -269,6 +272,8 @@ static void serial_close(struct tty_struct *tty, struct file *filp)
dbg("%s - port %d", __func__, port->number);
mutex_lock(&port->mutex);
+ serial = port->serial;
+ owner = serial->type->driver.owner;
if (port->port.count == 0) {
mutex_unlock(&port->mutex);
@@ -281,7 +286,7 @@ static void serial_close(struct tty_struct *tty, struct file *filp)
* this before we drop the port count. The call is protected
* by the port mutex
*/
- port->serial->type->close(tty, port, filp);
+ serial->type->close(tty, port, filp);
if (port->port.count == (port->console ? 2 : 1)) {
struct tty_struct *tty = tty_port_tty_get(&port->port);
@@ -295,17 +300,23 @@ static void serial_close(struct tty_struct *tty, struct file *filp)
}
}
- if (port->port.count == 1) {
- mutex_lock(&port->serial->disc_mutex);
- if (!port->serial->disconnected)
- usb_autopm_put_interface(port->serial->interface);
- mutex_unlock(&port->serial->disc_mutex);
- module_put(port->serial->type->driver.owner);
- }
--port->port.count;
-
+ count = port->port.count;
mutex_unlock(&port->mutex);
- usb_serial_put(port->serial);
+ put_device(&port->dev);
+
+ /* Mustn't dereference port any more */
+ if (count == 0) {
+ mutex_lock(&serial->disc_mutex);
+ if (!serial->disconnected)
+ usb_autopm_put_interface(serial->interface);
+ mutex_unlock(&serial->disc_mutex);
+ }
+ usb_serial_put(serial);
+
+ /* Mustn't dereference serial any more */
+ if (count == 0)
+ module_put(owner);
}
static int serial_write(struct tty_struct *tty, const unsigned char *buf,
@@ -549,7 +560,13 @@ static void kill_traffic(struct usb_serial_port *port)
static void port_free(struct usb_serial_port *port)
{
+ /*
+ * Stop all the traffic before cancelling the work, so that
+ * nobody will restart it by calling usb_serial_port_softint.
+ */
kill_traffic(port);
+ cancel_work_sync(&port->work);
+
usb_free_urb(port->read_urb);
usb_free_urb(port->write_urb);
usb_free_urb(port->interrupt_in_urb);
@@ -558,7 +575,6 @@ static void port_free(struct usb_serial_port *port)
kfree(port->bulk_out_buffer);
kfree(port->interrupt_in_buffer);
kfree(port->interrupt_out_buffer);
- flush_scheduled_work(); /* port->work */
kfree(port);
}
@@ -1043,6 +1059,12 @@ void usb_serial_disconnect(struct usb_interface *interface)
usb_set_intfdata(interface, NULL);
/* must set a flag, to signal subdrivers */
serial->disconnected = 1;
+ mutex_unlock(&serial->disc_mutex);
+
+ /* Unfortunately, many of the sub-drivers expect the port structures
+ * to exist when their shutdown method is called, so we have to go
+ * through this awkward two-step unregistration procedure.
+ */
for (i = 0; i < serial->num_ports; ++i) {
port = serial->port[i];
if (port) {
@@ -1052,11 +1074,21 @@ void usb_serial_disconnect(struct usb_interface *interface)
tty_kref_put(tty);
}
kill_traffic(port);
+ cancel_work_sync(&port->work);
+ device_del(&port->dev);
+ }
+ }
+ serial->type->shutdown(serial);
+ for (i = 0; i < serial->num_ports; ++i) {
+ port = serial->port[i];
+ if (port) {
+ put_device(&port->dev);
+ serial->port[i] = NULL;
}
}
+
/* let the last holder of this object
* cause it to be cleaned up */
- mutex_unlock(&serial->disc_mutex);
usb_serial_put(serial);
dev_info(dev, "device disconnected\n");
}
diff --git a/drivers/usb/serial/visor.c b/drivers/usb/serial/visor.c
index 4facce3d9364..5ac414bda718 100644
--- a/drivers/usb/serial/visor.c
+++ b/drivers/usb/serial/visor.c
@@ -296,14 +296,6 @@ static int visor_open(struct tty_struct *tty, struct usb_serial_port *port,
priv->throttled = 0;
spin_unlock_irqrestore(&priv->lock, flags);
- /*
- * Force low_latency on so that our tty_push actually forces the data
- * through, otherwise it is scheduled, and with high data rates (like
- * with OHCI) data can get lost.
- */
- if (tty)
- tty->low_latency = 1;
-
/* Start reading from the device */
usb_fill_bulk_urb(port->read_urb, serial->dev,
usb_rcvbulkpipe(serial->dev,
generated by cgit v1.2.3 (git 2.0.4) at 2024-11-15 03:50:10 +0000