diff options
Diffstat (limited to 'drivers/usb/storage/unusual_devs.h')
| -rw-r--r-- | drivers/usb/storage/unusual_devs.h | 97 |
1 files changed, 76 insertions, 21 deletions
diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index 732bf52a775e..39a7c11795c4 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -44,7 +44,8 @@ * running with this patch. * Send your submission to either Phil Dibowitz <phil@ipom.com> or * Alan Stern <stern@rowland.harvard.edu>, and don't forget to CC: the - * USB development list <linux-usb-devel@lists.sourceforge.net>. + * USB development list <linux-usb@vger.kernel.org> and the USB storage list + * <usb-storage@lists.one-eyed-alien.net> */ /* patch submitted by Vivian Bregier <Vivian.Bregier@imag.fr> @@ -400,6 +401,22 @@ UNUSUAL_DEV( 0x04a5, 0x3010, 0x0100, 0x0100, US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_IGNORE_RESIDUE ), +#ifdef CONFIG_USB_STORAGE_CYPRESS_ATACB +/* CY7C68300 : support atacb */ +UNUSUAL_DEV( 0x04b4, 0x6830, 0x0000, 0x9999, + "Cypress", + "Cypress AT2LP", + US_SC_CYP_ATACB, US_PR_DEVICE, NULL, + 0), + +/* CY7C68310 : support atacb and atacb2 */ +UNUSUAL_DEV( 0x04b4, 0x6831, 0x0000, 0x9999, + "Cypress", + "Cypress ISD-300LP", + US_SC_CYP_ATACB, US_PR_DEVICE, NULL, + 0), +#endif + /* Reported by Simon Levitt <simon@whattf.com> * This entry needs Sub and Proto fields */ UNUSUAL_DEV( 0x04b8, 0x0601, 0x0100, 0x0100, @@ -538,25 +555,31 @@ UNUSUAL_DEV( 0x04e6, 0x0101, 0x0200, 0x0200, "CD-RW Device", US_SC_8020, US_PR_CB, NULL, 0), +#ifdef CONFIG_USB_STORAGE_USBAT +UNUSUAL_DEV( 0x04e6, 0x1010, 0x0000, 0x9999, + "Shuttle/SCM", + "USBAT-02", + US_SC_SCSI, US_PR_USBAT, init_usbat_flash, + US_FL_SINGLE_LUN), +#endif + +/* Reported by Dmitry Khlystov <adminimus@gmail.com> */ +UNUSUAL_DEV( 0x04e8, 0x507c, 0x0220, 0x0220, + "Samsung", + "YP-U3", + US_SC_DEVICE, US_PR_DEVICE, NULL, + US_FL_MAX_SECTORS_64), + /* Entry and supporting patch by Theodore Kilgore <kilgota@auburn.edu>. * Device uses standards-violating 32-byte Bulk Command Block Wrappers and * reports itself as "Proprietary SCSI Bulk." Cf. device entry 0x084d:0x0011. */ - UNUSUAL_DEV( 0x04fc, 0x80c2, 0x0100, 0x0100, "Kobian Mercury", "Binocam DCB-132", US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_BULK32), -#ifdef CONFIG_USB_STORAGE_USBAT -UNUSUAL_DEV( 0x04e6, 0x1010, 0x0000, 0x9999, - "Shuttle/SCM", - "USBAT-02", - US_SC_SCSI, US_PR_USBAT, init_usbat_flash, - US_FL_SINGLE_LUN), -#endif - /* Reported by Bob Sass <rls@vectordb.com> -- only rev 1.33 tested */ UNUSUAL_DEV( 0x050d, 0x0115, 0x0133, 0x0133, "Belkin", @@ -1200,6 +1223,17 @@ UNUSUAL_DEV( 0x084d, 0x0011, 0x0110, 0x0110, US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_BULK32), +/* Andrew Lunn <andrew@lunn.ch> + * PanDigital Digital Picture Frame. Does not like ALLOW_MEDIUM_REMOVAL + * on LUN 4. + * Note: Vend:Prod clash with "Ltd Maxell WS30 Slim Digital Camera" +*/ +UNUSUAL_DEV( 0x0851, 0x1543, 0x0200, 0x0200, + "PanDigital", + "Photo Frame", + US_SC_DEVICE, US_PR_DEVICE, NULL, + US_FL_NOT_LOCKABLE), + /* Submitted by Jan De Luyck <lkml@kcore.org> */ UNUSUAL_DEV( 0x08bd, 0x1100, 0x0000, 0x0000, "CITIZEN", @@ -1285,6 +1319,16 @@ UNUSUAL_DEV( 0x0ace, 0x20ff, 0x0101, 0x0101, US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_IGNORE_DEVICE ), +/* Reported by F. Aben <f.aben@option.com> + * This device (wrongly) has a vendor-specific device descriptor. + * The entry is needed so usb-storage can bind to it's mass-storage + * interface as an interface driver */ +UNUSUAL_DEV( 0x0af0, 0x7401, 0x0000, 0x0000, + "Option", + "GI 0401 SD-Card", + US_SC_DEVICE, US_PR_DEVICE, NULL, + 0 ), + #ifdef CONFIG_USB_STORAGE_ISD200 UNUSUAL_DEV( 0x0bf6, 0xa001, 0x0100, 0x0110, "ATI", @@ -1486,7 +1530,7 @@ UNUSUAL_DEV( 0x0fce, 0xe031, 0x0000, 0x0000, "Sony Ericsson", "M600i", US_SC_DEVICE, US_PR_DEVICE, NULL, - US_FL_FIX_CAPACITY ), + US_FL_IGNORE_RESIDUE | US_FL_FIX_CAPACITY ), /* Reported by Kevin Cernekee <kpc-usbdev@gelato.uiuc.edu> * Tested on hardware version 1.10. @@ -1658,6 +1702,16 @@ UNUSUAL_DEV( 0x1652, 0x6600, 0x0201, 0x0201, US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_IGNORE_RESIDUE ), +/* Reported by Mauro Andreolini <andreoli@weblab.ing.unimo.it> + * This entry is needed to bypass the ZeroCD mechanism + * and to properly load as a modem device. + */ +UNUSUAL_DEV( 0x19d2, 0x2000, 0x0000, 0x0000, + "Onda ET502HS", + "USB MMC Storage", + US_SC_DEVICE, US_PR_DEVICE, NULL, + US_FL_IGNORE_DEVICE), + /* patch submitted by Davide Perini <perini.davide@dpsoftware.org> * and Renato Perini <rperini@email.it> */ @@ -1670,10 +1724,12 @@ UNUSUAL_DEV( 0x22b8, 0x3010, 0x0001, 0x0001, /* * Patch by Pete Zaitcev <zaitcev@redhat.com> * Report by Mark Patton. Red Hat bz#208928. + * Added support for rev 0x0002 (Motorola ROKR W5) + * by Javier Smaldone <javier@smaldone.com.ar> */ -UNUSUAL_DEV( 0x22b8, 0x4810, 0x0001, 0x0001, +UNUSUAL_DEV( 0x22b8, 0x4810, 0x0001, 0x0002, "Motorola", - "RAZR V3i", + "RAZR V3i/ROKR W5", US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_FIX_CAPACITY), @@ -1695,6 +1751,13 @@ UNUSUAL_DEV( 0x2735, 0x100b, 0x0000, 0x9999, US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_GO_SLOW ), +/* Reported by Rohan Hart <rohan.hart17@gmail.com> */ +UNUSUAL_DEV( 0x2770, 0x915d, 0x0010, 0x0010, + "INTOVA", + "Pixtreme", + US_SC_DEVICE, US_PR_DEVICE, NULL, + US_FL_FIX_CAPACITY ), + /* * David Härdeman <david@2gen.com> * The key makes the SCSI stack print confusing (but harmless) messages @@ -1719,14 +1782,6 @@ UNUSUAL_DEV( 0xed06, 0x4500, 0x0001, 0x0001, US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_CAPACITY_HEURISTICS), -#ifdef CONFIG_USB_STORAGE_CYPRESS_ATACB -UNUSUAL_DEV( 0x04b4, 0x6830, 0x0000, 0x9999, - "Cypress", - "Cypress AT2LP", - US_SC_CYP_ATACB, US_PR_BULK, NULL, - 0), -#endif - /* Control/Bulk transport for all SubClass values */ USUAL_DEV(US_SC_RBC, US_PR_CB, USB_US_TYPE_STOR), USUAL_DEV(US_SC_8020, US_PR_CB, USB_US_TYPE_STOR), |