summaryrefslogtreecommitdiff
path: root/drivers/usb/storage
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/storage')
-rw-r--r--drivers/usb/storage/Kconfig11
-rw-r--r--drivers/usb/storage/Makefile3
-rw-r--r--drivers/usb/storage/dpcm.c86
-rw-r--r--drivers/usb/storage/dpcm.h32
-rw-r--r--drivers/usb/storage/libusual.c7
-rw-r--r--drivers/usb/storage/option_ms.c147
-rw-r--r--drivers/usb/storage/option_ms.h4
-rw-r--r--drivers/usb/storage/protocol.c24
-rw-r--r--drivers/usb/storage/protocol.h3
-rw-r--r--drivers/usb/storage/scsiglue.c43
-rw-r--r--drivers/usb/storage/sddr09.c43
-rw-r--r--drivers/usb/storage/sddr09.h5
-rw-r--r--drivers/usb/storage/transport.c219
-rw-r--r--drivers/usb/storage/transport.h2
-rw-r--r--drivers/usb/storage/unusual_devs.h354
-rw-r--r--drivers/usb/storage/usb.c106
-rw-r--r--drivers/usb/storage/usb.h5
17 files changed, 660 insertions, 434 deletions
diff --git a/drivers/usb/storage/Kconfig b/drivers/usb/storage/Kconfig
index c68b738900bd..9df6887b91f6 100644
--- a/drivers/usb/storage/Kconfig
+++ b/drivers/usb/storage/Kconfig
@@ -61,13 +61,6 @@ config USB_STORAGE_ISD200
- CyQ've CQ8060A CDRW drive
- Planex eXtreme Drive RX-25HU USB-IDE cable (not model RX-25U)
-config USB_STORAGE_DPCM
- bool "Microtech/ZiO! CompactFlash/SmartMedia support"
- depends on USB_STORAGE
- help
- Say Y here to support the Microtech/ZiO! CompactFlash reader.
- There is a web page at <http://www.ziocorp.com/products/>.
-
config USB_STORAGE_USBAT
bool "USBAT/USBAT02-based storage support"
depends on USB_STORAGE
@@ -90,12 +83,12 @@ config USB_STORAGE_USBAT
- Sandisk ImageMate SDDR-05b
config USB_STORAGE_SDDR09
- bool "SanDisk SDDR-09 (and other SmartMedia) support"
+ bool "SanDisk SDDR-09 (and other SmartMedia, including DPCM) support"
depends on USB_STORAGE
help
Say Y here to include additional code to support the Sandisk SDDR-09
SmartMedia reader in the USB Mass Storage driver.
- Also works for the Microtech Zio! SmartMedia reader.
+ Also works for the Microtech Zio! CompactFlash/SmartMedia reader.
config USB_STORAGE_SDDR55
bool "SanDisk SDDR-55 SmartMedia support"
diff --git a/drivers/usb/storage/Makefile b/drivers/usb/storage/Makefile
index 7f8beb5366ae..b32069313390 100644
--- a/drivers/usb/storage/Makefile
+++ b/drivers/usb/storage/Makefile
@@ -14,7 +14,6 @@ usb-storage-obj-$(CONFIG_USB_STORAGE_USBAT) += shuttle_usbat.o
usb-storage-obj-$(CONFIG_USB_STORAGE_SDDR09) += sddr09.o
usb-storage-obj-$(CONFIG_USB_STORAGE_SDDR55) += sddr55.o
usb-storage-obj-$(CONFIG_USB_STORAGE_FREECOM) += freecom.o
-usb-storage-obj-$(CONFIG_USB_STORAGE_DPCM) += dpcm.o
usb-storage-obj-$(CONFIG_USB_STORAGE_ISD200) += isd200.o
usb-storage-obj-$(CONFIG_USB_STORAGE_DATAFAB) += datafab.o
usb-storage-obj-$(CONFIG_USB_STORAGE_JUMPSHOT) += jumpshot.o
@@ -24,7 +23,7 @@ usb-storage-obj-$(CONFIG_USB_STORAGE_KARMA) += karma.o
usb-storage-obj-$(CONFIG_USB_STORAGE_CYPRESS_ATACB) += cypress_atacb.o
usb-storage-objs := scsiglue.o protocol.o transport.o usb.o \
- initializers.o sierra_ms.o $(usb-storage-obj-y)
+ initializers.o sierra_ms.o option_ms.o $(usb-storage-obj-y)
ifneq ($(CONFIG_USB_LIBUSUAL),)
obj-$(CONFIG_USB) += libusual.o
diff --git a/drivers/usb/storage/dpcm.c b/drivers/usb/storage/dpcm.c
deleted file mode 100644
index 939923471af4..000000000000
--- a/drivers/usb/storage/dpcm.c
+++ /dev/null
@@ -1,86 +0,0 @@
-/* Driver for Microtech DPCM-USB CompactFlash/SmartMedia reader
- *
- * DPCM driver v0.1:
- *
- * First release
- *
- * Current development and maintenance by:
- * (c) 2000 Brian Webb (webbb@earthlink.net)
- *
- * This device contains both a CompactFlash card reader, which
- * uses the Control/Bulk w/o Interrupt protocol and
- * a SmartMedia card reader that uses the same protocol
- * as the SDDR09.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2, or (at your option) any
- * later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <scsi/scsi.h>
-#include <scsi/scsi_cmnd.h>
-#include <scsi/scsi_device.h>
-
-#include "usb.h"
-#include "transport.h"
-#include "protocol.h"
-#include "debug.h"
-#include "dpcm.h"
-#include "sddr09.h"
-
-/*
- * Transport for the Microtech DPCM-USB
- *
- */
-int dpcm_transport(struct scsi_cmnd *srb, struct us_data *us)
-{
- int ret;
-
- if (srb == NULL)
- return USB_STOR_TRANSPORT_ERROR;
-
- US_DEBUGP("dpcm_transport: LUN=%d\n", srb->device->lun);
-
- switch (srb->device->lun) {
- case 0:
-
- /*
- * LUN 0 corresponds to the CompactFlash card reader.
- */
- ret = usb_stor_CB_transport(srb, us);
- break;
-
-#ifdef CONFIG_USB_STORAGE_SDDR09
- case 1:
-
- /*
- * LUN 1 corresponds to the SmartMedia card reader.
- */
-
- /*
- * Set the LUN to 0 (just in case).
- */
- srb->device->lun = 0; us->srb->device->lun = 0;
- ret = sddr09_transport(srb, us);
- srb->device->lun = 1; us->srb->device->lun = 1;
- break;
-
-#endif
-
- default:
- US_DEBUGP("dpcm_transport: Invalid LUN %d\n", srb->device->lun);
- ret = USB_STOR_TRANSPORT_ERROR;
- break;
- }
- return ret;
-}
diff --git a/drivers/usb/storage/dpcm.h b/drivers/usb/storage/dpcm.h
deleted file mode 100644
index e7b7b0f120d7..000000000000
--- a/drivers/usb/storage/dpcm.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/* Driver for Microtech DPCM-USB CompactFlash/SmartMedia reader
- *
- * DPCM driver v0.1:
- *
- * First release
- *
- * Current development and maintenance by:
- * (c) 2000 Brian Webb (webbb@earthlink.net)
- *
- * See dpcm.c for more explanation
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2, or (at your option) any
- * later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef _MICROTECH_DPCM_USB_H
-#define _MICROTECH_DPCM_USB_H
-
-extern int dpcm_transport(struct scsi_cmnd *srb, struct us_data *us);
-
-#endif
diff --git a/drivers/usb/storage/libusual.c b/drivers/usb/storage/libusual.c
index d617e8ae6b00..f970b27ba308 100644
--- a/drivers/usb/storage/libusual.c
+++ b/drivers/usb/storage/libusual.c
@@ -46,6 +46,12 @@ static int usu_probe_thread(void *arg);
{ USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin,bcdDeviceMax), \
.driver_info = (flags)|(USB_US_TYPE_STOR<<24) }
+#define COMPLIANT_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \
+ vendorName, productName, useProtocol, useTransport, \
+ initFunction, flags) \
+{ USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \
+ .driver_info = (flags) }
+
#define USUAL_DEV(useProto, useTrans, useType) \
{ USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, useProto, useTrans), \
.driver_info = ((useType)<<24) }
@@ -57,6 +63,7 @@ struct usb_device_id storage_usb_ids [] = {
#undef USUAL_DEV
#undef UNUSUAL_DEV
+#undef COMPLIANT_DEV
MODULE_DEVICE_TABLE(usb, storage_usb_ids);
EXPORT_SYMBOL_GPL(storage_usb_ids);
diff --git a/drivers/usb/storage/option_ms.c b/drivers/usb/storage/option_ms.c
new file mode 100644
index 000000000000..353f922939a4
--- /dev/null
+++ b/drivers/usb/storage/option_ms.c
@@ -0,0 +1,147 @@
+/*
+ * Driver for Option High Speed Mobile Devices.
+ *
+ * (c) 2008 Dan Williams <dcbw@redhat.com>
+ *
+ * Inspiration taken from sierra_ms.c by Kevin Lloyd <klloyd@sierrawireless.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/usb.h>
+
+#include "usb.h"
+#include "transport.h"
+#include "option_ms.h"
+#include "debug.h"
+
+#define ZCD_FORCE_MODEM 0x01
+#define ZCD_ALLOW_MS 0x02
+
+static unsigned int option_zero_cd = ZCD_FORCE_MODEM;
+module_param(option_zero_cd, uint, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(option_zero_cd, "ZeroCD mode (1=Force Modem (default),"
+ " 2=Allow CD-Rom");
+
+#define RESPONSE_LEN 1024
+
+static int option_rezero(struct us_data *us, int ep_in, int ep_out)
+{
+ const unsigned char rezero_msg[] = {
+ 0x55, 0x53, 0x42, 0x43, 0x78, 0x56, 0x34, 0x12,
+ 0x01, 0x00, 0x00, 0x00, 0x80, 0x00, 0x06, 0x01,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
+ };
+ char *buffer;
+ int result;
+
+ US_DEBUGP("Option MS: %s", "DEVICE MODE SWITCH\n");
+
+ buffer = kzalloc(RESPONSE_LEN, GFP_KERNEL);
+ if (buffer == NULL)
+ return USB_STOR_TRANSPORT_ERROR;
+
+ memcpy(buffer, rezero_msg, sizeof (rezero_msg));
+ result = usb_stor_bulk_transfer_buf(us,
+ usb_sndbulkpipe(us->pusb_dev, ep_out),
+ buffer, sizeof (rezero_msg), NULL);
+ if (result != USB_STOR_XFER_GOOD) {
+ result = USB_STOR_XFER_ERROR;
+ goto out;
+ }
+
+ /* Some of the devices need to be asked for a response, but we don't
+ * care what that response is.
+ */
+ result = usb_stor_bulk_transfer_buf(us,
+ usb_sndbulkpipe(us->pusb_dev, ep_out),
+ buffer, RESPONSE_LEN, NULL);
+ result = USB_STOR_XFER_GOOD;
+
+out:
+ kfree(buffer);
+ return result;
+}
+
+int option_ms_init(struct us_data *us)
+{
+ struct usb_device *udev;
+ struct usb_interface *intf;
+ struct usb_host_interface *iface_desc;
+ struct usb_endpoint_descriptor *endpoint = NULL;
+ u8 ep_in = 0, ep_out = 0;
+ int ep_in_size = 0, ep_out_size = 0;
+ int i, result;
+
+ udev = us->pusb_dev;
+ intf = us->pusb_intf;
+
+ /* Ensure it's really a ZeroCD device; devices that are already
+ * in modem mode return 0xFF for class, subclass, and protocol.
+ */
+ if (udev->descriptor.bDeviceClass != 0 ||
+ udev->descriptor.bDeviceSubClass != 0 ||
+ udev->descriptor.bDeviceProtocol != 0)
+ return USB_STOR_TRANSPORT_GOOD;
+
+ US_DEBUGP("Option MS: option_ms_init called\n");
+
+ /* Find the right mass storage interface */
+ iface_desc = intf->cur_altsetting;
+ if (iface_desc->desc.bInterfaceClass != 0x8 ||
+ iface_desc->desc.bInterfaceSubClass != 0x6 ||
+ iface_desc->desc.bInterfaceProtocol != 0x50) {
+ US_DEBUGP("Option MS: mass storage interface not found, no action "
+ "required\n");
+ return USB_STOR_TRANSPORT_GOOD;
+ }
+
+ /* Find the mass storage bulk endpoints */
+ for (i = 0; i < iface_desc->desc.bNumEndpoints && (!ep_in_size || !ep_out_size); ++i) {
+ endpoint = &iface_desc->endpoint[i].desc;
+
+ if (usb_endpoint_is_bulk_in(endpoint)) {
+ ep_in = usb_endpoint_num(endpoint);
+ ep_in_size = le16_to_cpu(endpoint->wMaxPacketSize);
+ } else if (usb_endpoint_is_bulk_out(endpoint)) {
+ ep_out = usb_endpoint_num(endpoint);
+ ep_out_size = le16_to_cpu(endpoint->wMaxPacketSize);
+ }
+ }
+
+ /* Can't find the mass storage endpoints */
+ if (!ep_in_size || !ep_out_size) {
+ US_DEBUGP("Option MS: mass storage endpoints not found, no action "
+ "required\n");
+ return USB_STOR_TRANSPORT_GOOD;
+ }
+
+ /* Force Modem mode */
+ if (option_zero_cd == ZCD_FORCE_MODEM) {
+ US_DEBUGP("Option MS: %s", "Forcing Modem Mode\n");
+ result = option_rezero(us, ep_in, ep_out);
+ if (result != USB_STOR_XFER_GOOD)
+ US_DEBUGP("Option MS: Failed to switch to modem mode.\n");
+ return -EIO;
+ } else if (option_zero_cd == ZCD_ALLOW_MS) {
+ /* Allow Mass Storage mode (keep CD-Rom) */
+ US_DEBUGP("Option MS: %s", "Allowing Mass Storage Mode if device"
+ " requests it\n");
+ }
+
+ return USB_STOR_TRANSPORT_GOOD;
+}
+
diff --git a/drivers/usb/storage/option_ms.h b/drivers/usb/storage/option_ms.h
new file mode 100644
index 000000000000..b6e448cab039
--- /dev/null
+++ b/drivers/usb/storage/option_ms.h
@@ -0,0 +1,4 @@
+#ifndef _OPTION_MS_H_
+#define _OPTION_MS_H_
+extern int option_ms_init(struct us_data *us);
+#endif
diff --git a/drivers/usb/storage/protocol.c b/drivers/usb/storage/protocol.c
index 3b3357e20ea7..be441d84bc64 100644
--- a/drivers/usb/storage/protocol.c
+++ b/drivers/usb/storage/protocol.c
@@ -56,9 +56,9 @@
* Protocol routines
***********************************************************************/
-void usb_stor_qic157_command(struct scsi_cmnd *srb, struct us_data *us)
+void usb_stor_pad12_command(struct scsi_cmnd *srb, struct us_data *us)
{
- /* Pad the ATAPI command with zeros
+ /* Pad the SCSI command with zeros out to 12 bytes
*
* NOTE: This only works because a scsi_cmnd struct field contains
* a unsigned char cmnd[16], so we know we have storage available
@@ -73,26 +73,6 @@ void usb_stor_qic157_command(struct scsi_cmnd *srb, struct us_data *us)
usb_stor_invoke_transport(srb, us);
}
-void usb_stor_ATAPI_command(struct scsi_cmnd *srb, struct us_data *us)
-{
- /* Pad the ATAPI command with zeros
- *
- * NOTE: This only works because a scsi_cmnd struct field contains
- * a unsigned char cmnd[16], so we know we have storage available
- */
-
- /* Pad the ATAPI command with zeros */
- for (; srb->cmd_len<12; srb->cmd_len++)
- srb->cmnd[srb->cmd_len] = 0;
-
- /* set command length to 12 bytes */
- srb->cmd_len = 12;
-
- /* send the command to the transport layer */
- usb_stor_invoke_transport(srb, us);
-}
-
-
void usb_stor_ufi_command(struct scsi_cmnd *srb, struct us_data *us)
{
/* fix some commands -- this is a form of mode translation
diff --git a/drivers/usb/storage/protocol.h b/drivers/usb/storage/protocol.h
index 487056ffb516..ffc3e2af0156 100644
--- a/drivers/usb/storage/protocol.h
+++ b/drivers/usb/storage/protocol.h
@@ -40,8 +40,7 @@
#define _PROTOCOL_H_
/* Protocol handling routines */
-extern void usb_stor_ATAPI_command(struct scsi_cmnd*, struct us_data*);
-extern void usb_stor_qic157_command(struct scsi_cmnd*, struct us_data*);
+extern void usb_stor_pad12_command(struct scsi_cmnd*, struct us_data*);
extern void usb_stor_ufi_command(struct scsi_cmnd*, struct us_data*);
extern void usb_stor_transparent_scsi_command(struct scsi_cmnd*,
struct us_data*);
diff --git a/drivers/usb/storage/scsiglue.c b/drivers/usb/storage/scsiglue.c
index 09779f6a8179..2a42b862aa9f 100644
--- a/drivers/usb/storage/scsiglue.c
+++ b/drivers/usb/storage/scsiglue.c
@@ -59,6 +59,13 @@
#include "transport.h"
#include "protocol.h"
+/* Vendor IDs for companies that seem to include the READ CAPACITY bug
+ * in all their devices
+ */
+#define VENDOR_ID_NOKIA 0x0421
+#define VENDOR_ID_NIKON 0x04b0
+#define VENDOR_ID_MOTOROLA 0x22b8
+
/***********************************************************************
* Host functions
***********************************************************************/
@@ -129,11 +136,35 @@ static int slave_configure(struct scsi_device *sdev)
max_sectors);
}
+ /* Some USB host controllers can't do DMA; they have to use PIO.
+ * They indicate this by setting their dma_mask to NULL. For
+ * such controllers we need to make sure the block layer sets
+ * up bounce buffers in addressable memory.
+ */
+ if (!us->pusb_dev->bus->controller->dma_mask)
+ blk_queue_bounce_limit(sdev->request_queue, BLK_BOUNCE_HIGH);
+
/* We can't put these settings in slave_alloc() because that gets
* called before the device type is known. Consequently these
* settings can't be overridden via the scsi devinfo mechanism. */
if (sdev->type == TYPE_DISK) {
+ /* Some vendors seem to put the READ CAPACITY bug into
+ * all their devices -- primarily makers of cell phones
+ * and digital cameras. Since these devices always use
+ * flash media and can be expected to have an even number
+ * of sectors, we will always enable the CAPACITY_HEURISTICS
+ * flag unless told otherwise. */
+ switch (le16_to_cpu(us->pusb_dev->descriptor.idVendor)) {
+ case VENDOR_ID_NOKIA:
+ case VENDOR_ID_NIKON:
+ case VENDOR_ID_MOTOROLA:
+ if (!(us->fflags & (US_FL_FIX_CAPACITY |
+ US_FL_CAPACITY_OK)))
+ us->fflags |= US_FL_CAPACITY_HEURISTICS;
+ break;
+ }
+
/* Disk-type devices use MODE SENSE(6) if the protocol
* (SubClass) is Transparent SCSI, otherwise they use
* MODE SENSE(10). */
@@ -170,6 +201,10 @@ static int slave_configure(struct scsi_device *sdev)
if (us->fflags & US_FL_CAPACITY_HEURISTICS)
sdev->guess_capacity = 1;
+ /* assume SPC3 or latter devices support sense size > 18 */
+ if (sdev->scsi_level > SCSI_SPC_2)
+ us->fflags |= US_FL_SANE_SENSE;
+
/* Some devices report a SCSI revision level above 2 but are
* unable to handle the REPORT LUNS command (for which
* support is mandatory at level 3). Since we already have
@@ -196,6 +231,14 @@ static int slave_configure(struct scsi_device *sdev)
* sector in a larger then 1 sector read, since the performance
* impact is negible we set this flag for all USB disks */
sdev->last_sector_bug = 1;
+
+ /* Enable last-sector hacks for single-target devices using
+ * the Bulk-only transport, unless we already know the
+ * capacity will be decremented or is correct. */
+ if (!(us->fflags & (US_FL_FIX_CAPACITY | US_FL_CAPACITY_OK |
+ US_FL_SCM_MULT_TARG)) &&
+ us->protocol == US_PR_BULK)
+ us->use_last_sector_hacks = 1;
} else {
/* Non-disk-type devices don't need to blacklist any pages
diff --git a/drivers/usb/storage/sddr09.c b/drivers/usb/storage/sddr09.c
index c5a54b872c24..531ae5c5abf3 100644
--- a/drivers/usb/storage/sddr09.c
+++ b/drivers/usb/storage/sddr09.c
@@ -45,6 +45,7 @@
#include <scsi/scsi.h>
#include <scsi/scsi_cmnd.h>
+#include <scsi/scsi_device.h>
#include "usb.h"
#include "transport.h"
@@ -1446,6 +1447,48 @@ usb_stor_sddr09_dpcm_init(struct us_data *us) {
}
/*
+ * Transport for the Microtech DPCM-USB
+ */
+int dpcm_transport(struct scsi_cmnd *srb, struct us_data *us)
+{
+ int ret;
+
+ US_DEBUGP("dpcm_transport: LUN=%d\n", srb->device->lun);
+
+ switch (srb->device->lun) {
+ case 0:
+
+ /*
+ * LUN 0 corresponds to the CompactFlash card reader.
+ */
+ ret = usb_stor_CB_transport(srb, us);
+ break;
+
+ case 1:
+
+ /*
+ * LUN 1 corresponds to the SmartMedia card reader.
+ */
+
+ /*
+ * Set the LUN to 0 (just in case).
+ */
+ srb->device->lun = 0;
+ ret = sddr09_transport(srb, us);
+ srb->device->lun = 1;
+ break;
+
+ default:
+ US_DEBUGP("dpcm_transport: Invalid LUN %d\n",
+ srb->device->lun);
+ ret = USB_STOR_TRANSPORT_ERROR;
+ break;
+ }
+ return ret;
+}
+
+
+/*
* Transport for the Sandisk SDDR-09
*/
int sddr09_transport(struct scsi_cmnd *srb, struct us_data *us)
diff --git a/drivers/usb/storage/sddr09.h b/drivers/usb/storage/sddr09.h
index e50033ad7b19..b701172e12e3 100644
--- a/drivers/usb/storage/sddr09.h
+++ b/drivers/usb/storage/sddr09.h
@@ -28,8 +28,11 @@
/* Sandisk SDDR-09 stuff */
extern int sddr09_transport(struct scsi_cmnd *srb, struct us_data *us);
+extern int usb_stor_sddr09_init(struct us_data *us);
+
+/* Microtech DPCM-USB stuff */
+extern int dpcm_transport(struct scsi_cmnd *srb, struct us_data *us);
extern int usb_stor_sddr09_dpcm_init(struct us_data *us);
-extern int usb_stor_sddr09_init(struct us_data *us);
#endif
diff --git a/drivers/usb/storage/transport.c b/drivers/usb/storage/transport.c
index 79108d5d3171..1d5438e6363b 100644
--- a/drivers/usb/storage/transport.c
+++ b/drivers/usb/storage/transport.c
@@ -57,6 +57,9 @@
#include "scsiglue.h"
#include "debug.h"
+#include <linux/blkdev.h>
+#include "../../scsi/sd.h"
+
/***********************************************************************
* Data transfer routines
@@ -511,6 +514,110 @@ int usb_stor_bulk_transfer_sg(struct us_data* us, unsigned int pipe,
* Transport routines
***********************************************************************/
+/* There are so many devices that report the capacity incorrectly,
+ * this routine was written to counteract some of the resulting
+ * problems.
+ */
+static void last_sector_hacks(struct us_data *us, struct scsi_cmnd *srb)
+{
+ struct gendisk *disk;
+ struct scsi_disk *sdkp;
+ u32 sector;
+
+ /* To Report "Medium Error: Record Not Found */
+ static unsigned char record_not_found[18] = {
+ [0] = 0x70, /* current error */
+ [2] = MEDIUM_ERROR, /* = 0x03 */
+ [7] = 0x0a, /* additional length */
+ [12] = 0x14 /* Record Not Found */
+ };
+
+ /* If last-sector problems can't occur, whether because the
+ * capacity was already decremented or because the device is
+ * known to report the correct capacity, then we don't need
+ * to do anything.
+ */
+ if (!us->use_last_sector_hacks)
+ return;
+
+ /* Was this command a READ(10) or a WRITE(10)? */
+ if (srb->cmnd[0] != READ_10 && srb->cmnd[0] != WRITE_10)
+ goto done;
+
+ /* Did this command access the last sector? */
+ sector = (srb->cmnd[2] << 24) | (srb->cmnd[3] << 16) |
+ (srb->cmnd[4] << 8) | (srb->cmnd[5]);
+ disk = srb->request->rq_disk;
+ if (!disk)
+ goto done;
+ sdkp = scsi_disk(disk);
+ if (!sdkp)
+ goto done;
+ if (sector + 1 != sdkp->capacity)
+ goto done;
+
+ if (srb->result == SAM_STAT_GOOD && scsi_get_resid(srb) == 0) {
+
+ /* The command succeeded. If the capacity is odd
+ * (i.e., if the sector number is even) then the
+ * "always-even" heuristic would be wrong for this
+ * device. Issue a WARN() so that the kerneloops.org
+ * project will be notified and we will then know to
+ * mark the device with a CAPACITY_OK flag. Hopefully
+ * this will occur for only a few devices.
+ *
+ * Use the sign of us->last_sector_hacks to tell whether
+ * the warning has already been issued; we don't need
+ * more than one warning per device.
+ */
+ if (!(sector & 1) && us->use_last_sector_hacks > 0) {
+ unsigned vid = le16_to_cpu(
+ us->pusb_dev->descriptor.idVendor);
+ unsigned pid = le16_to_cpu(
+ us->pusb_dev->descriptor.idProduct);
+ unsigned rev = le16_to_cpu(
+ us->pusb_dev->descriptor.bcdDevice);
+
+ WARN(1, "%s: Successful last sector success at %u, "
+ "device %04x:%04x:%04x\n",
+ sdkp->disk->disk_name, sector,
+ vid, pid, rev);
+ us->use_last_sector_hacks = -1;
+ }
+
+ } else {
+ /* The command failed. Allow up to 3 retries in case this
+ * is some normal sort of failure. After that, assume the
+ * capacity is wrong and we're trying to access the sector
+ * beyond the end. Replace the result code and sense data
+ * with values that will cause the SCSI core to fail the
+ * command immediately, instead of going into an infinite
+ * (or even just a very long) retry loop.
+ */
+ if (++us->last_sector_retries < 3)
+ return;
+ srb->result = SAM_STAT_CHECK_CONDITION;
+ memcpy(srb->sense_buffer, record_not_found,
+ sizeof(record_not_found));
+
+ /* In theory we might want to issue a WARN() here if the
+ * capacity is even, since it could indicate the device
+ * has the READ CAPACITY bug _and_ the real capacity is
+ * odd. But it could also indicate that the device
+ * simply can't access its last sector, a failure mode
+ * which is surprisingly common. So no warning.
+ */
+ }
+
+ done:
+ /* Don't reset the retry counter for TEST UNIT READY commands,
+ * because they get issued after device resets which might be
+ * caused by a failed last-sector access.
+ */
+ if (srb->cmnd[0] != TEST_UNIT_READY)
+ us->last_sector_retries = 0;
+}
+
/* Invoke the transport and basic error-handling/recovery methods
*
* This is used by the protocol layers to actually send the message to
@@ -544,6 +651,7 @@ void usb_stor_invoke_transport(struct scsi_cmnd *srb, struct us_data *us)
/* if the transport provided its own sense data, don't auto-sense */
if (result == USB_STOR_TRANSPORT_NO_SENSE) {
srb->result = SAM_STAT_CHECK_CONDITION;
+ last_sector_hacks(us, srb);
return;
}
@@ -579,6 +687,20 @@ void usb_stor_invoke_transport(struct scsi_cmnd *srb, struct us_data *us)
}
/*
+ * Determine if this device is SAT by seeing if the
+ * command executed successfully. Otherwise we'll have
+ * to wait for at least one CHECK_CONDITION to determine
+ * SANE_SENSE support
+ */
+ if ((srb->cmnd[0] == ATA_16 || srb->cmnd[0] == ATA_12) &&
+ result == USB_STOR_TRANSPORT_GOOD &&
+ !(us->fflags & US_FL_SANE_SENSE) &&
+ !(srb->cmnd[2] & 0x20)) {
+ US_DEBUGP("-- SAT supported, increasing auto-sense\n");
+ us->fflags |= US_FL_SANE_SENSE;
+ }
+
+ /*
* A short transfer on a command where we don't expect it
* is unusual, but it doesn't mean we need to auto-sense.
*/
@@ -595,10 +717,15 @@ void usb_stor_invoke_transport(struct scsi_cmnd *srb, struct us_data *us)
if (need_auto_sense) {
int temp_result;
struct scsi_eh_save ses;
+ int sense_size = US_SENSE_SIZE;
+
+ /* device supports and needs bigger sense buffer */
+ if (us->fflags & US_FL_SANE_SENSE)
+ sense_size = ~0;
US_DEBUGP("Issuing auto-REQUEST_SENSE\n");
- scsi_eh_prep_cmnd(srb, &ses, NULL, 0, US_SENSE_SIZE);
+ scsi_eh_prep_cmnd(srb, &ses, NULL, 0, sense_size);
/* FIXME: we must do the protocol translation here */
if (us->subclass == US_SC_RBC || us->subclass == US_SC_SCSI ||
@@ -632,6 +759,25 @@ void usb_stor_invoke_transport(struct scsi_cmnd *srb, struct us_data *us)
return;
}
+ /* If the sense data returned is larger than 18-bytes then we
+ * assume this device supports requesting more in the future.
+ * The response code must be 70h through 73h inclusive.
+ */
+ if (srb->sense_buffer[7] > (US_SENSE_SIZE - 8) &&
+ !(us->fflags & US_FL_SANE_SENSE) &&
+ (srb->sense_buffer[0] & 0x7C) == 0x70) {
+ US_DEBUGP("-- SANE_SENSE support enabled\n");
+ us->fflags |= US_FL_SANE_SENSE;
+
+ /* Indicate to the user that we truncated their sense
+ * because we didn't know it supported larger sense.
+ */
+ US_DEBUGP("-- Sense data truncated to %i from %i\n",
+ US_SENSE_SIZE,
+ srb->sense_buffer[7] + 8);
+ srb->sense_buffer[7] = (US_SENSE_SIZE - 8);
+ }
+
US_DEBUGP("-- Result from auto-sense is %d\n", temp_result);
US_DEBUGP("-- code: 0x%x, key: 0x%x, ASC: 0x%x, ASCQ: 0x%x\n",
srb->sense_buffer[0],
@@ -667,6 +813,7 @@ void usb_stor_invoke_transport(struct scsi_cmnd *srb, struct us_data *us)
scsi_bufflen(srb) - scsi_get_resid(srb) < srb->underflow)
srb->result = (DID_ERROR << 16) | (SUGGEST_RETRY << 24);
+ last_sector_hacks(us, srb);
return;
/* Error and abort processing: try to resynchronize with the device
@@ -694,6 +841,7 @@ void usb_stor_invoke_transport(struct scsi_cmnd *srb, struct us_data *us)
us->transport_reset(us);
}
clear_bit(US_FLIDX_RESETTING, &us->dflags);
+ last_sector_hacks(us, srb);
}
/* Stop the current URB transfer */
@@ -718,10 +866,10 @@ void usb_stor_stop_transport(struct us_data *us)
}
/*
- * Control/Bulk/Interrupt transport
+ * Control/Bulk and Control/Bulk/Interrupt transport
*/
-int usb_stor_CBI_transport(struct scsi_cmnd *srb, struct us_data *us)
+int usb_stor_CB_transport(struct scsi_cmnd *srb, struct us_data *us)
{
unsigned int transfer_length = scsi_bufflen(srb);
unsigned int pipe = 0;
@@ -763,6 +911,13 @@ int usb_stor_CBI_transport(struct scsi_cmnd *srb, struct us_data *us)
}
/* STATUS STAGE */
+
+ /* NOTE: CB does not have a status stage. Silly, I know. So
+ * we have to catch this at a higher level.
+ */
+ if (us->protocol != US_PR_CBI)
+ return USB_STOR_TRANSPORT_GOOD;
+
result = usb_stor_intr_transfer(us, us->iobuf, 2);
US_DEBUGP("Got interrupt data (0x%x, 0x%x)\n",
us->iobuf[0], us->iobuf[1]);
@@ -817,56 +972,6 @@ int usb_stor_CBI_transport(struct scsi_cmnd *srb, struct us_data *us)
}
/*
- * Control/Bulk transport
- */
-int usb_stor_CB_transport(struct scsi_cmnd *srb, struct us_data *us)
-{
- unsigned int transfer_length = scsi_bufflen(srb);
- int result;
-
- /* COMMAND STAGE */
- /* let's send the command via the control pipe */
- result = usb_stor_ctrl_transfer(us, us->send_ctrl_pipe,
- US_CBI_ADSC,
- USB_TYPE_CLASS | USB_RECIP_INTERFACE, 0,
- us->ifnum, srb->cmnd, srb->cmd_len);
-
- /* check the return code for the command */
- US_DEBUGP("Call to usb_stor_ctrl_transfer() returned %d\n", result);
-
- /* if we stalled the command, it means command failed */
- if (result == USB_STOR_XFER_STALLED) {
- return USB_STOR_TRANSPORT_FAILED;
- }
-
- /* Uh oh... serious problem here */
- if (result != USB_STOR_XFER_GOOD) {
- return USB_STOR_TRANSPORT_ERROR;
- }
-
- /* DATA STAGE */
- /* transfer the data payload for this command, if one exists*/
- if (transfer_length) {
- unsigned int pipe = srb->sc_data_direction == DMA_FROM_DEVICE ?
- us->recv_bulk_pipe : us->send_bulk_pipe;
- result = usb_stor_bulk_srb(us, pipe, srb);
- US_DEBUGP("CB data stage result is 0x%x\n", result);
-
- /* if we stalled the data transfer it means command failed */
- if (result == USB_STOR_XFER_STALLED)
- return USB_STOR_TRANSPORT_FAILED;
- if (result > USB_STOR_XFER_STALLED)
- return USB_STOR_TRANSPORT_ERROR;
- }
-
- /* STATUS STAGE */
- /* NOTE: CB does not have a status stage. Silly, I know. So
- * we have to catch this at a higher level.
- */
- return USB_STOR_TRANSPORT_GOOD;
-}
-
-/*
* Bulk only transport
*/
@@ -1173,10 +1278,9 @@ int usb_stor_Bulk_reset(struct us_data *us)
*/
int usb_stor_port_reset(struct us_data *us)
{
- int result, rc_lock;
+ int result;
- result = rc_lock =
- usb_lock_device_for_reset(us->pusb_dev, us->pusb_intf);
+ result = usb_lock_device_for_reset(us->pusb_dev, us->pusb_intf);
if (result < 0)
US_DEBUGP("unable to lock device for reset: %d\n", result);
else {
@@ -1189,8 +1293,7 @@ int usb_stor_port_reset(struct us_data *us)
US_DEBUGP("usb_reset_device returns %d\n",
result);
}
- if (rc_lock)
- usb_unlock_device(us->pusb_dev);
+ usb_unlock_device(us->pusb_dev);
}
return result;
}
diff --git a/drivers/usb/storage/transport.h b/drivers/usb/storage/transport.h
index e70b88182f0e..242ff5e791a5 100644
--- a/drivers/usb/storage/transport.h
+++ b/drivers/usb/storage/transport.h
@@ -113,8 +113,6 @@ struct bulk_cs_wrap {
#define US_CBI_ADSC 0
-extern int usb_stor_CBI_transport(struct scsi_cmnd *, struct us_data*);
-
extern int usb_stor_CB_transport(struct scsi_cmnd *, struct us_data*);
extern int usb_stor_CB_reset(struct us_data*);
diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
index bfcc1fe82518..a7f9513fa19d 100644
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -27,7 +27,8 @@
/* IMPORTANT NOTE: This file must be included in another file which does
* the following thing for it to work:
- * The macro UNUSUAL_DEV() must be defined before this file is included
+ * The UNUSUAL_DEV, COMPLIANT_DEV, and USUAL_DEV macros must be defined
+ * before this file is included.
*/
/* If you edit this file, please try to keep it sorted first by VendorID,
@@ -46,6 +47,12 @@
* <usb-storage@lists.one-eyed-alien.net>
*/
+/* Note: If you add an entry only in order to set the CAPACITY_OK flag,
+ * use the COMPLIANT_DEV macro instead of UNUSUAL_DEV. This is
+ * because such entries mark devices which actually work correctly,
+ * as opposed to devices that do something strangely or wrongly.
+ */
+
/* patch submitted by Vivian Bregier <Vivian.Bregier@imag.fr>
*/
UNUSUAL_DEV( 0x03eb, 0x2002, 0x0100, 0x0100,
@@ -85,6 +92,13 @@ UNUSUAL_DEV( 0x03f0, 0x0307, 0x0001, 0x0001,
US_SC_8070, US_PR_USBAT, init_usbat_cd, 0),
#endif
+/* Reported by Ben Efros <ben@pc-doctor.com> */
+UNUSUAL_DEV( 0x03f0, 0x070c, 0x0000, 0x0000,
+ "HP",
+ "Personal Media Drive",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ US_FL_SANE_SENSE ),
+
/* Reported by Grant Grundler <grundler@parisc-linux.org>
* HP r707 camera in "Disk" mode with 2.00.23 or 2.00.24 firmware.
*/
@@ -160,34 +174,6 @@ UNUSUAL_DEV( 0x0421, 0x0019, 0x0592, 0x0592,
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_MAX_SECTORS_64 ),
-/* Reported by Filip Joelsson <filip@blueturtle.nu> */
-UNUSUAL_DEV( 0x0421, 0x005d, 0x0001, 0x0600,
- "Nokia",
- "Nokia 3110c",
- US_SC_DEVICE, US_PR_DEVICE, NULL,
- US_FL_FIX_CAPACITY ),
-
-/* Reported by Ozan Sener <themgzzy@gmail.com> */
-UNUSUAL_DEV( 0x0421, 0x0060, 0x0551, 0x0551,
- "Nokia",
- "3500c",
- US_SC_DEVICE, US_PR_DEVICE, NULL,
- US_FL_FIX_CAPACITY ),
-
-/* Reported by CSECSY Laszlo <boobaa@frugalware.org> */
-UNUSUAL_DEV( 0x0421, 0x0063, 0x0001, 0x0601,
- "Nokia",
- "Nokia 3109c",
- US_SC_DEVICE, US_PR_DEVICE, NULL,
- US_FL_FIX_CAPACITY ),
-
-/* Patch for Nokia 5310 capacity */
-UNUSUAL_DEV( 0x0421, 0x006a, 0x0000, 0x0701,
- "Nokia",
- "5310",
- US_SC_DEVICE, US_PR_DEVICE, NULL,
- US_FL_FIX_CAPACITY ),
-
/* Reported by Mario Rettig <mariorettig@web.de> */
UNUSUAL_DEV( 0x0421, 0x042e, 0x0100, 0x0100,
"Nokia",
@@ -253,35 +239,6 @@ UNUSUAL_DEV( 0x0421, 0x0495, 0x0370, 0x0370,
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_MAX_SECTORS_64 ),
-/* Reported by Cedric Godin <cedric@belbone.be> */
-UNUSUAL_DEV( 0x0421, 0x04b9, 0x0500, 0x0551,
- "Nokia",
- "5300",
- US_SC_DEVICE, US_PR_DEVICE, NULL,
- US_FL_FIX_CAPACITY ),
-
-/* Reported by Richard Nauber <RichardNauber@web.de> */
-UNUSUAL_DEV( 0x0421, 0x04fa, 0x0550, 0x0660,
- "Nokia",
- "6300",
- US_SC_DEVICE, US_PR_DEVICE, NULL,
- US_FL_FIX_CAPACITY ),
-
-/* Patch for Nokia 5310 capacity */
-UNUSUAL_DEV( 0x0421, 0x006a, 0x0000, 0x0591,
- "Nokia",
- "5310",
- US_SC_DEVICE, US_PR_DEVICE, NULL,
- US_FL_FIX_CAPACITY ),
-
-/* Submitted by Ricky Wong Yung Fei <evilbladewarrior@gmail.com> */
-/* Nokia 7610 Supernova - Too many sectors reported in usb storage mode */
-UNUSUAL_DEV( 0x0421, 0x00f5, 0x0000, 0x0470,
- "Nokia",
- "7610 Supernova",
- US_SC_DEVICE, US_PR_DEVICE, NULL,
- US_FL_FIX_CAPACITY ),
-
/* Reported by Olaf Hering <olh@suse.de> from novell bug #105878 */
UNUSUAL_DEV( 0x0424, 0x0fdc, 0x0210, 0x0210,
"SMSC",
@@ -289,11 +246,17 @@ UNUSUAL_DEV( 0x0424, 0x0fdc, 0x0210, 0x0210,
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_SINGLE_LUN ),
-#ifdef CONFIG_USB_STORAGE_DPCM
+#ifdef CONFIG_USB_STORAGE_SDDR09
UNUSUAL_DEV( 0x0436, 0x0005, 0x0100, 0x0100,
"Microtech",
"CameraMate (DPCM_USB)",
US_SC_SCSI, US_PR_DPCM_USB, NULL, 0 ),
+#else
+UNUSUAL_DEV( 0x0436, 0x0005, 0x0100, 0x0100,
+ "Microtech",
+ "CameraMate",
+ US_SC_SCSI, US_PR_CB, NULL,
+ US_FL_SINGLE_LUN ),
#endif
/* Patch submitted by Daniel Drake <dsd@gentoo.org>
@@ -388,6 +351,15 @@ UNUSUAL_DEV( 0x04a4, 0x0004, 0x0001, 0x0001,
"DVD-CAM DZ-MV100A Camcorder",
US_SC_SCSI, US_PR_CB, NULL, US_FL_SINGLE_LUN),
+/* BENQ DC5330
+ * Reported by Manuel Fombuena <mfombuena@ya.com> and
+ * Frank Copeland <fjc@thingy.apana.org.au> */
+UNUSUAL_DEV( 0x04a5, 0x3010, 0x0100, 0x0100,
+ "Tekom Technologies, Inc",
+ "300_CAMERA",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ US_FL_IGNORE_RESIDUE ),
+
/* Patch for Nikon coolpix 2000
* Submitted by Fabien Cosse <fabien.cosse@wanadoo.fr>*/
UNUSUAL_DEV( 0x04b0, 0x0301, 0x0010, 0x0010,
@@ -396,83 +368,6 @@ UNUSUAL_DEV( 0x04b0, 0x0301, 0x0010, 0x0010,
US_SC_DEVICE, US_PR_DEVICE,NULL,
US_FL_NOT_LOCKABLE ),
-/* Reported by Stefan de Konink <skinkie@xs4all.nl> */
-UNUSUAL_DEV( 0x04b0, 0x0401, 0x0200, 0x0200,
- "NIKON",
- "NIKON DSC D100",
- US_SC_DEVICE, US_PR_DEVICE, NULL,
- US_FL_FIX_CAPACITY),
-
-/* Reported by Tobias Kunze Briseno <t-linux@fictive.com> */
-UNUSUAL_DEV( 0x04b0, 0x0403, 0x0200, 0x0200,
- "NIKON",
- "NIKON DSC D2H",
- US_SC_DEVICE, US_PR_DEVICE, NULL,
- US_FL_FIX_CAPACITY),
-
-/* Reported by Milinevsky Dmitry <niam.niam@gmail.com> */
-UNUSUAL_DEV( 0x04b0, 0x0409, 0x0100, 0x0100,
- "NIKON",
- "NIKON DSC D50",
- US_SC_DEVICE, US_PR_DEVICE, NULL,
- US_FL_FIX_CAPACITY),
-
-/* Reported by Andreas Bockhold <andreas@bockionline.de> */
-UNUSUAL_DEV( 0x04b0, 0x0405, 0x0100, 0x0100,
- "NIKON",
- "NIKON DSC D70",
- US_SC_DEVICE, US_PR_DEVICE, NULL,
- US_FL_FIX_CAPACITY),
-
-/* Reported by Jamie Kitson <jamie@staberinde.fsnet.co.uk> */
-UNUSUAL_DEV( 0x04b0, 0x040d, 0x0100, 0x0100,
- "NIKON",
- "NIKON DSC D70s",
- US_SC_DEVICE, US_PR_DEVICE, NULL,
- US_FL_FIX_CAPACITY),
-
-/* Reported by Graber and Mike Pagano <mpagano-kernel@mpagano.com> */
-UNUSUAL_DEV( 0x04b0, 0x040f, 0x0100, 0x0200,
- "NIKON",
- "NIKON DSC D200",
- US_SC_DEVICE, US_PR_DEVICE, NULL,
- US_FL_FIX_CAPACITY),
-
-/* Reported by Emil Larsson <emil@swip.net> */
-UNUSUAL_DEV( 0x04b0, 0x0411, 0x0100, 0x0111,
- "NIKON",
- "NIKON DSC D80",
- US_SC_DEVICE, US_PR_DEVICE, NULL,
- US_FL_FIX_CAPACITY),
-
-/* Reported by Ortwin Glueck <odi@odi.ch> */
-UNUSUAL_DEV( 0x04b0, 0x0413, 0x0110, 0x0111,
- "NIKON",
- "NIKON DSC D40",
- US_SC_DEVICE, US_PR_DEVICE, NULL,
- US_FL_FIX_CAPACITY),
-
-/* Reported by Paul Check <paul@openstreet.com> */
-UNUSUAL_DEV( 0x04b0, 0x0415, 0x0100, 0x0100,
- "NIKON",
- "NIKON DSC D2Xs",
- US_SC_DEVICE, US_PR_DEVICE, NULL,
- US_FL_FIX_CAPACITY),
-
-/* Reported by Shan Destromp (shansan@gmail.com) */
-UNUSUAL_DEV( 0x04b0, 0x0417, 0x0100, 0x0100,
- "NIKON",
- "NIKON DSC D40X",
- US_SC_DEVICE, US_PR_DEVICE, NULL,
- US_FL_FIX_CAPACITY),
-
-/* Reported by paul ready <lxtwin@homecall.co.uk> */
-UNUSUAL_DEV( 0x04b0, 0x0419, 0x0100, 0x0200,
- "NIKON",
- "NIKON DSC D300",
- US_SC_DEVICE, US_PR_DEVICE, NULL,
- US_FL_FIX_CAPACITY),
-
/* Reported by Doug Maxey (dwm@austin.ibm.com) */
UNUSUAL_DEV( 0x04b3, 0x4001, 0x0110, 0x0110,
"IBM",
@@ -480,15 +375,6 @@ UNUSUAL_DEV( 0x04b3, 0x4001, 0x0110, 0x0110,
US_SC_DEVICE, US_PR_CB, NULL,
US_FL_MAX_SECTORS_MIN),
-/* BENQ DC5330
- * Reported by Manuel Fombuena <mfombuena@ya.com> and
- * Frank Copeland <fjc@thingy.apana.org.au> */
-UNUSUAL_DEV( 0x04a5, 0x3010, 0x0100, 0x0100,
- "Tekom Technologies, Inc",
- "300_CAMERA",
- US_SC_DEVICE, US_PR_DEVICE, NULL,
- US_FL_IGNORE_RESIDUE ),
-
#ifdef CONFIG_USB_STORAGE_CYPRESS_ATACB
/* CY7C68300 : support atacb */
UNUSUAL_DEV( 0x04b4, 0x6830, 0x0000, 0x9999,
@@ -594,6 +480,12 @@ UNUSUAL_DEV( 0x04e6, 0x0005, 0x0100, 0x0208,
"eUSB SmartMedia / CompactFlash Adapter",
US_SC_SCSI, US_PR_DPCM_USB, usb_stor_sddr09_dpcm_init,
0),
+#else
+UNUSUAL_DEV( 0x04e6, 0x0005, 0x0100, 0x0208,
+ "SCM Microsystems",
+ "eUSB CompactFlash Adapter",
+ US_SC_SCSI, US_PR_CB, NULL,
+ US_FL_SINGLE_LUN),
#endif
/* Reported by Markus Demleitner <msdemlei@cl.uni-heidelberg.de> */
@@ -685,6 +577,13 @@ UNUSUAL_DEV( 0x0525, 0xa140, 0x0100, 0x0100,
US_SC_8070, US_PR_DEVICE, NULL,
US_FL_FIX_INQUIRY ),
+/* Added by Alan Stern <stern@rowland.harvard.edu> */
+COMPLIANT_DEV(0x0525, 0xa4a5, 0x0000, 0x9999,
+ "Linux",
+ "File-backed Storage Gadget",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ US_FL_CAPACITY_OK ),
+
/* Yakumo Mega Image 37
* Submitted by Stephan Fuhrmann <atomenergie@t-online.de> */
UNUSUAL_DEV( 0x052b, 0x1801, 0x0100, 0x0100,
@@ -807,15 +706,15 @@ UNUSUAL_DEV( 0x054c, 0x006d, 0x0000, 0x9999,
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_FIX_INQUIRY ),
-/* Submitted by Mike Alborn <malborn@deandra.homeip.net> */
-UNUSUAL_DEV( 0x054c, 0x016a, 0x0000, 0x9999,
+/* Submitted by Frank Engel <frankie@cse.unsw.edu.au> */
+UNUSUAL_DEV( 0x054c, 0x0099, 0x0000, 0x9999,
"Sony",
"PEG Mass Storage",
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_FIX_INQUIRY ),
-
-/* Submitted by Frank Engel <frankie@cse.unsw.edu.au> */
-UNUSUAL_DEV( 0x054c, 0x0099, 0x0000, 0x9999,
+
+/* Submitted by Mike Alborn <malborn@deandra.homeip.net> */
+UNUSUAL_DEV( 0x054c, 0x016a, 0x0000, 0x9999,
"Sony",
"PEG Mass Storage",
US_SC_DEVICE, US_PR_DEVICE, NULL,
@@ -966,6 +865,18 @@ UNUSUAL_DEV( 0x05ac, 0x120a, 0x0000, 0x9999,
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_FIX_CAPACITY ),
+/* Reported by Dan Williams <dcbw@redhat.com>
+ * Option N.V. mobile broadband modems
+ * Ignore driver CD mode and force into modem mode by default.
+ */
+
+/* Globetrotter HSDPA; mass storage shows up as Qualcomm for vendor */
+UNUSUAL_DEV( 0x05c6, 0x1000, 0x0000, 0x9999,
+ "Option N.V.",
+ "Mass Storage",
+ US_SC_DEVICE, US_PR_DEVICE, option_ms_init,
+ 0),
+
#ifdef CONFIG_USB_STORAGE_JUMPSHOT
UNUSUAL_DEV( 0x05dc, 0x0001, 0x0000, 0x0001,
"Lexar",
@@ -1004,6 +915,13 @@ UNUSUAL_DEV( 0x05e3, 0x0702, 0x0000, 0xffff,
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_GO_SLOW | US_FL_MAX_SECTORS_64 ),
+/* Reported by Ben Efros <ben@pc-doctor.com> */
+UNUSUAL_DEV( 0x05e3, 0x0723, 0x9451, 0x9451,
+ "Genesys Logic",
+ "USB to SATA",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ US_FL_SANE_SENSE ),
+
/* Reported by Hanno Boeck <hanno@gmx.de>
* Taken from the Lycoris Kernel */
UNUSUAL_DEV( 0x0636, 0x0003, 0x0000, 0x9999,
@@ -1040,7 +958,7 @@ UNUSUAL_DEV( 0x067b, 0x2507, 0x0100, 0x0100,
US_FL_FIX_CAPACITY | US_FL_GO_SLOW ),
/* Reported by Alex Butcher <alex.butcher@assursys.co.uk> */
-UNUSUAL_DEV( 0x067b, 0x3507, 0x0001, 0x0001,
+UNUSUAL_DEV( 0x067b, 0x3507, 0x0001, 0x0101,
"Prolific Technology Inc.",
"ATAPI-6 Bridge Controller",
US_SC_DEVICE, US_PR_DEVICE, NULL,
@@ -1161,11 +1079,17 @@ UNUSUAL_DEV( 0x07af, 0x0005, 0x0100, 0x0100,
US_SC_DEVICE, US_PR_DEVICE, usb_stor_euscsi_init,
US_FL_SCM_MULT_TARG ),
-#ifdef CONFIG_USB_STORAGE_DPCM
+#ifdef CONFIG_USB_STORAGE_SDDR09
UNUSUAL_DEV( 0x07af, 0x0006, 0x0100, 0x0100,
"Microtech",
"CameraMate (DPCM_USB)",
US_SC_SCSI, US_PR_DPCM_USB, NULL, 0 ),
+#else
+UNUSUAL_DEV( 0x07af, 0x0006, 0x0100, 0x0100,
+ "Microtech",
+ "CameraMate",
+ US_SC_SCSI, US_PR_CB, NULL,
+ US_FL_SINGLE_LUN ),
#endif
#ifdef CONFIG_USB_STORAGE_ALAUDA
@@ -1320,6 +1244,13 @@ UNUSUAL_DEV( 0x0840, 0x0082, 0x0001, 0x0001,
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_FIX_CAPACITY),
+/* Reported and patched by Nguyen Anh Quynh <aquynh@gmail.com> */
+UNUSUAL_DEV( 0x0840, 0x0084, 0x0001, 0x0001,
+ "Argosy",
+ "Storage",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ US_FL_FIX_CAPACITY),
+
/* Entry and supporting patch by Theodore Kilgore <kilgota@auburn.edu>.
* Flag will support Bulk devices which use a standards-violating 32-byte
* Command Block Wrapper. Here, the "DC2MEGA" cameras (several brands) with
@@ -1343,17 +1274,6 @@ UNUSUAL_DEV( 0x0851, 0x1543, 0x0200, 0x0200,
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_NOT_LOCKABLE),
-/* Andrew Lunn <andrew@lunn.ch>
- * PanDigital Digital Picture Frame. Does not like ALLOW_MEDIUM_REMOVAL
- * on LUN 4.
- * Note: Vend:Prod clash with "Ltd Maxell WS30 Slim Digital Camera"
-*/
-UNUSUAL_DEV( 0x0851, 0x1543, 0x0200, 0x0200,
- "PanDigital",
- "Photo Frame",
- US_SC_DEVICE, US_PR_DEVICE, NULL,
- US_FL_NOT_LOCKABLE),
-
/* Submitted by Jan De Luyck <lkml@kcore.org> */
UNUSUAL_DEV( 0x08bd, 0x1100, 0x0000, 0x0000,
"CITIZEN",
@@ -1425,6 +1345,13 @@ UNUSUAL_DEV( 0x0a17, 0x006, 0x0000, 0xffff,
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_FIX_INQUIRY ),
+/* Reported by Jaak Ristioja <Ristioja@gmail.com> */
+UNUSUAL_DEV( 0x0a17, 0x006e, 0x0100, 0x0100,
+ "Pentax",
+ "K10D",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ US_FL_FIX_CAPACITY ),
+
/* These are virtual windows driver CDs, which the zd1211rw driver
* automatically converts into WLAN devices. */
UNUSUAL_DEV( 0x0ace, 0x2011, 0x0101, 0x0101,
@@ -1439,6 +1366,18 @@ UNUSUAL_DEV( 0x0ace, 0x20ff, 0x0101, 0x0101,
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_IGNORE_DEVICE ),
+/* Reported by Dan Williams <dcbw@redhat.com>
+ * Option N.V. mobile broadband modems
+ * Ignore driver CD mode and force into modem mode by default.
+ */
+
+/* iCON 225 */
+UNUSUAL_DEV( 0x0af0, 0x6971, 0x0000, 0x9999,
+ "Option N.V.",
+ "Mass Storage",
+ US_SC_DEVICE, US_PR_DEVICE, option_ms_init,
+ 0),
+
/* Reported by F. Aben <f.aben@option.com>
* This device (wrongly) has a vendor-specific device descriptor.
* The entry is needed so usb-storage can bind to it's mass-storage
@@ -1449,6 +1388,13 @@ UNUSUAL_DEV( 0x0af0, 0x7401, 0x0000, 0x0000,
US_SC_DEVICE, US_PR_DEVICE, NULL,
0 ),
+/* Reported by Ben Efros <ben@pc-doctor.com> */
+UNUSUAL_DEV( 0x0bc2, 0x3010, 0x0000, 0x0000,
+ "Seagate",
+ "FreeAgent Pro",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ US_FL_SANE_SENSE ),
+
#ifdef CONFIG_USB_STORAGE_ISD200
UNUSUAL_DEV( 0x0bf6, 0xa001, 0x0100, 0x0110,
"ATI",
@@ -1472,6 +1418,22 @@ UNUSUAL_DEV( 0x0c0b, 0xa109, 0x0000, 0xffff,
US_FL_SINGLE_LUN ),
#endif
+UNUSUAL_DEV( 0x0d49, 0x7310, 0x0000, 0x9999,
+ "Maxtor",
+ "USB to SATA",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ US_FL_SANE_SENSE),
+
+/*
+ * Pete Zaitcev <zaitcev@yahoo.com>, bz#164688.
+ * The device blatantly ignores LUN and returns 1 in GetMaxLUN.
+ */
+UNUSUAL_DEV( 0x0c45, 0x1060, 0x0100, 0x0100,
+ "Unknown",
+ "Unknown",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ US_FL_SINGLE_LUN ),
+
/* Submitted by: Nick Sillik <n.sillik@temple.edu>
* Needed for OneTouch extension to usb-storage
*
@@ -1489,16 +1451,6 @@ UNUSUAL_DEV( 0x0c0b, 0xa109, 0x0000, 0xffff,
0),
#endif
-/*
- * Pete Zaitcev <zaitcev@yahoo.com>, bz#164688.
- * The device blatantly ignores LUN and returns 1 in GetMaxLUN.
- */
-UNUSUAL_DEV( 0x0c45, 0x1060, 0x0100, 0x0100,
- "Unknown",
- "Unknown",
- US_SC_DEVICE, US_PR_DEVICE, NULL,
- US_FL_SINGLE_LUN ),
-
/* Submitted by Joris Struyve <joris@struyve.be> */
UNUSUAL_DEV( 0x0d96, 0x410a, 0x0001, 0xffff,
"Medion",
@@ -1516,6 +1468,13 @@ UNUSUAL_DEV( 0x0d96, 0x5200, 0x0001, 0x0200,
"JD 5200 z3",
US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_FIX_INQUIRY),
+/* Reported by Jason Johnston <killean@shaw.ca> */
+UNUSUAL_DEV( 0x0dc4, 0x0073, 0x0000, 0x0000,
+ "Macpower Technology Co.LTD.",
+ "USB 2.0 3.5\" DEVICE",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ US_FL_FIX_CAPACITY),
+
/* Reported by Lubomir Blaha <tritol@trilogic.cz>
* I _REALLY_ don't know what 3rd, 4th number and all defines mean, but this
* works for me. Can anybody correct these values? (I able to test corrected
@@ -1638,13 +1597,6 @@ UNUSUAL_DEV( 0x0fce, 0xe030, 0x0000, 0x0000,
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_FIX_CAPACITY | US_FL_IGNORE_RESIDUE ),
-/* Reported by Ricardo Barberis <ricardo@dattatec.com> */
-UNUSUAL_DEV( 0x0fce, 0xe092, 0x0000, 0x0000,
- "Sony Ericsson",
- "P1i",
- US_SC_DEVICE, US_PR_DEVICE, NULL,
- US_FL_IGNORE_RESIDUE ),
-
/* Reported by Emmanuel Vasilakis <evas@forthnet.gr> */
UNUSUAL_DEV( 0x0fce, 0xe031, 0x0000, 0x0000,
"Sony Ericsson",
@@ -1652,6 +1604,13 @@ UNUSUAL_DEV( 0x0fce, 0xe031, 0x0000, 0x0000,
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_IGNORE_RESIDUE | US_FL_FIX_CAPACITY ),
+/* Reported by Ricardo Barberis <ricardo@dattatec.com> */
+UNUSUAL_DEV( 0x0fce, 0xe092, 0x0000, 0x0000,
+ "Sony Ericsson",
+ "P1i",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ US_FL_IGNORE_RESIDUE ),
+
/* Reported by Kevin Cernekee <kpc-usbdev@gelato.uiuc.edu>
* Tested on hardware version 1.10.
* Entry is needed only for the initializer function override.
@@ -1664,6 +1623,12 @@ UNUSUAL_DEV( 0x1019, 0x0c55, 0x0000, 0x0110,
US_SC_DEVICE, US_PR_DEVICE, usb_stor_ucr61s2b_init,
0 ),
+UNUSUAL_DEV( 0x1058, 0x0704, 0x0000, 0x9999,
+ "Western Digital",
+ "External HDD",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ US_FL_SANE_SENSE),
+
/* Reported by Fabio Venturi <f.venturi@tdnet.it>
* The device reports a vendor-specific bDeviceClass.
*/
@@ -2053,10 +2018,10 @@ UNUSUAL_DEV( 0x14cd, 0x6600, 0x0201, 0x0201,
* JMicron responds to USN and several other SCSI ioctls with a
* residue that causes subsequent I/O requests to fail. */
UNUSUAL_DEV( 0x152d, 0x2329, 0x0100, 0x0100,
- "JMicron",
- "USB to ATA/ATAPI Bridge",
- US_SC_DEVICE, US_PR_DEVICE, NULL,
- US_FL_IGNORE_RESIDUE ),
+ "JMicron",
+ "USB to ATA/ATAPI Bridge",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ US_FL_IGNORE_RESIDUE | US_FL_SANE_SENSE ),
/* Reported by Robert Schedel <r.schedel@yahoo.de>
* Note: this is a 'super top' device like the above 14cd/6600 device */
@@ -2086,27 +2051,6 @@ UNUSUAL_DEV( 0x22b8, 0x3010, 0x0001, 0x0001,
US_FL_FIX_CAPACITY | US_FL_IGNORE_RESIDUE ),
/*
- * Patch by Pete Zaitcev <zaitcev@redhat.com>
- * Report by Mark Patton. Red Hat bz#208928.
- * Added support for rev 0x0002 (Motorola ROKR W5)
- * by Javier Smaldone <javier@smaldone.com.ar>
- */
-UNUSUAL_DEV( 0x22b8, 0x4810, 0x0001, 0x0002,
- "Motorola",
- "RAZR V3i/ROKR W5",
- US_SC_DEVICE, US_PR_DEVICE, NULL,
- US_FL_FIX_CAPACITY),
-
-/*
- * Patch by Jost Diederichs <jost@qdusa.com>
- */
-UNUSUAL_DEV(0x22b8, 0x6410, 0x0001, 0x9999,
- "Motorola Inc.",
- "Motorola Phone (RAZRV3xx)",
- US_SC_DEVICE, US_PR_DEVICE, NULL,
- US_FL_FIX_CAPACITY),
-
-/*
* Patch by Constantin Baranov <const@tltsu.ru>
* Report by Andreas Koenecke.
* Motorola ROKR Z6.
diff --git a/drivers/usb/storage/usb.c b/drivers/usb/storage/usb.c
index 27016fd2cad1..4becf495ca2d 100644
--- a/drivers/usb/storage/usb.c
+++ b/drivers/usb/storage/usb.c
@@ -75,9 +75,6 @@
#ifdef CONFIG_USB_STORAGE_SDDR55
#include "sddr55.h"
#endif
-#ifdef CONFIG_USB_STORAGE_DPCM
-#include "dpcm.h"
-#endif
#ifdef CONFIG_USB_STORAGE_FREECOM
#include "freecom.h"
#endif
@@ -103,6 +100,7 @@
#include "cypress_atacb.h"
#endif
#include "sierra_ms.h"
+#include "option_ms.h"
/* Some informational data */
MODULE_AUTHOR("Matthew Dharm <mdharm-usb@one-eyed-alien.net>");
@@ -113,6 +111,10 @@ static unsigned int delay_use = 5;
module_param(delay_use, uint, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(delay_use, "seconds to delay before using a new device");
+static char quirks[128];
+module_param_string(quirks, quirks, sizeof(quirks), S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(quirks, "supplemental list of device IDs and their quirks");
+
/*
* The entries in this table correspond, line for line,
@@ -126,6 +128,8 @@ MODULE_PARM_DESC(delay_use, "seconds to delay before using a new device");
{ USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin,bcdDeviceMax), \
.driver_info = (flags)|(USB_US_TYPE_STOR<<24) }
+#define COMPLIANT_DEV UNUSUAL_DEV
+
#define USUAL_DEV(useProto, useTrans, useType) \
{ USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, useProto, useTrans), \
.driver_info = (USB_US_TYPE_STOR<<24) }
@@ -134,6 +138,7 @@ static struct usb_device_id storage_usb_ids [] = {
# include "unusual_devs.h"
#undef UNUSUAL_DEV
+#undef COMPLIANT_DEV
#undef USUAL_DEV
/* Terminating entry */
{ }
@@ -164,6 +169,8 @@ MODULE_DEVICE_TABLE (usb, storage_usb_ids);
.initFunction = init_function, \
}
+#define COMPLIANT_DEV UNUSUAL_DEV
+
#define USUAL_DEV(use_protocol, use_transport, use_type) \
{ \
.useProtocol = use_protocol, \
@@ -173,6 +180,7 @@ MODULE_DEVICE_TABLE (usb, storage_usb_ids);
static struct us_unusual_dev us_unusual_dev_list[] = {
# include "unusual_devs.h"
# undef UNUSUAL_DEV
+# undef COMPLIANT_DEV
# undef USUAL_DEV
/* Terminating entry */
@@ -464,13 +472,83 @@ static int associate_dev(struct us_data *us, struct usb_interface *intf)
US_DEBUGP("I/O buffer allocation failed\n");
return -ENOMEM;
}
+ return 0;
+}
- us->sensebuf = kmalloc(US_SENSE_SIZE, GFP_KERNEL);
- if (!us->sensebuf) {
- US_DEBUGP("Sense buffer allocation failed\n");
- return -ENOMEM;
+/* Works only for digits and letters, but small and fast */
+#define TOLOWER(x) ((x) | 0x20)
+
+/* Adjust device flags based on the "quirks=" module parameter */
+static void adjust_quirks(struct us_data *us)
+{
+ char *p;
+ u16 vid = le16_to_cpu(us->pusb_dev->descriptor.idVendor);
+ u16 pid = le16_to_cpu(us->pusb_dev->descriptor.idProduct);
+ unsigned f = 0;
+ unsigned int mask = (US_FL_SANE_SENSE | US_FL_FIX_CAPACITY |
+ US_FL_CAPACITY_HEURISTICS | US_FL_IGNORE_DEVICE |
+ US_FL_NOT_LOCKABLE | US_FL_MAX_SECTORS_64 |
+ US_FL_CAPACITY_OK | US_FL_IGNORE_RESIDUE |
+ US_FL_SINGLE_LUN | US_FL_NO_WP_DETECT);
+
+ p = quirks;
+ while (*p) {
+ /* Each entry consists of VID:PID:flags */
+ if (vid == simple_strtoul(p, &p, 16) &&
+ *p == ':' &&
+ pid == simple_strtoul(p+1, &p, 16) &&
+ *p == ':')
+ break;
+
+ /* Move forward to the next entry */
+ while (*p) {
+ if (*p++ == ',')
+ break;
+ }
}
- return 0;
+ if (!*p) /* No match */
+ return;
+
+ /* Collect the flags */
+ while (*++p && *p != ',') {
+ switch (TOLOWER(*p)) {
+ case 'a':
+ f |= US_FL_SANE_SENSE;
+ break;
+ case 'c':
+ f |= US_FL_FIX_CAPACITY;
+ break;
+ case 'h':
+ f |= US_FL_CAPACITY_HEURISTICS;
+ break;
+ case 'i':
+ f |= US_FL_IGNORE_DEVICE;
+ break;
+ case 'l':
+ f |= US_FL_NOT_LOCKABLE;
+ break;
+ case 'm':
+ f |= US_FL_MAX_SECTORS_64;
+ break;
+ case 'o':
+ f |= US_FL_CAPACITY_OK;
+ break;
+ case 'r':
+ f |= US_FL_IGNORE_RESIDUE;
+ break;
+ case 's':
+ f |= US_FL_SINGLE_LUN;
+ break;
+ case 'w':
+ f |= US_FL_NO_WP_DETECT;
+ break;
+ /* Ignore unrecognized flag characters */
+ }
+ }
+ us->fflags = (us->fflags & ~mask) | f;
+ dev_info(&us->pusb_intf->dev, "Quirks match for "
+ "vid %04x pid %04x: %x\n",
+ vid, pid, f);
}
/* Find an unusual_dev descriptor (always succeeds in the current code) */
@@ -497,6 +575,7 @@ static int get_device_info(struct us_data *us, const struct usb_device_id *id)
idesc->bInterfaceProtocol :
unusual_dev->useTransport;
us->fflags = USB_US_ORIG_FLAGS(id->driver_info);
+ adjust_quirks(us);
if (us->fflags & US_FL_IGNORE_DEVICE) {
printk(KERN_INFO USB_STORAGE "device ignored\n");
@@ -562,7 +641,7 @@ static int get_transport(struct us_data *us)
case US_PR_CBI:
us->transport_name = "Control/Bulk/Interrupt";
- us->transport = usb_stor_CBI_transport;
+ us->transport = usb_stor_CB_transport;
us->transport_reset = usb_stor_CB_reset;
us->max_lun = 7;
break;
@@ -675,19 +754,19 @@ static int get_protocol(struct us_data *us)
case US_SC_8020:
us->protocol_name = "8020i";
- us->proto_handler = usb_stor_ATAPI_command;
+ us->proto_handler = usb_stor_pad12_command;
us->max_lun = 0;
break;
case US_SC_QIC:
us->protocol_name = "QIC-157";
- us->proto_handler = usb_stor_qic157_command;
+ us->proto_handler = usb_stor_pad12_command;
us->max_lun = 0;
break;
case US_SC_8070:
us->protocol_name = "8070i";
- us->proto_handler = usb_stor_ATAPI_command;
+ us->proto_handler = usb_stor_pad12_command;
us->max_lun = 0;
break;
@@ -840,8 +919,6 @@ static void dissociate_dev(struct us_data *us)
{
US_DEBUGP("-- %s\n", __func__);
- kfree(us->sensebuf);
-
/* Free the device-related DMA-mapped buffers */
if (us->cr)
usb_buffer_free(us->pusb_dev, sizeof(*us->cr), us->cr,
@@ -1064,6 +1141,7 @@ static struct usb_driver usb_storage_driver = {
static int __init usb_stor_init(void)
{
int retval;
+
printk(KERN_INFO "Initializing USB Mass Storage driver...\n");
/* register the driver, return usb_register return code if error */
diff --git a/drivers/usb/storage/usb.h b/drivers/usb/storage/usb.h
index a4ad73bd832d..65e674e4be99 100644
--- a/drivers/usb/storage/usb.h
+++ b/drivers/usb/storage/usb.h
@@ -138,7 +138,6 @@ struct us_data {
struct usb_ctrlrequest *cr; /* control requests */
struct usb_sg_request current_sg; /* scatter-gather req. */
unsigned char *iobuf; /* I/O buffer */
- unsigned char *sensebuf; /* sense data buffer */
dma_addr_t cr_dma; /* buffer DMA addresses */
dma_addr_t iobuf_dma;
struct task_struct *ctl_thread; /* the control thread */
@@ -155,6 +154,10 @@ struct us_data {
#ifdef CONFIG_PM
pm_hook suspend_resume_hook;
#endif
+
+ /* hacks for READ CAPACITY bug handling */
+ int use_last_sector_hacks;
+ int last_sector_retries;
};
/* Convert between us_data and the corresponding Scsi_Host */
generated by cgit v1.2.3 (git 2.0.4) at 2024-11-15 00:17:27 +0000