diff options
Diffstat (limited to 'drivers/usb/storage')
| -rw-r--r-- | drivers/usb/storage/unusual_devs.h | 71 |
1 files changed, 45 insertions, 26 deletions
diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index a0ed889230aa..1b09578cbb10 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -401,6 +401,14 @@ UNUSUAL_DEV( 0x04a5, 0x3010, 0x0100, 0x0100, US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_IGNORE_RESIDUE ), +#ifdef CONFIG_USB_STORAGE_CYPRESS_ATACB +UNUSUAL_DEV( 0x04b4, 0x6830, 0x0000, 0x9999, + "Cypress", + "Cypress AT2LP", + US_SC_CYP_ATACB, US_PR_BULK, NULL, + 0), +#endif + /* Reported by Simon Levitt <simon@whattf.com> * This entry needs Sub and Proto fields */ UNUSUAL_DEV( 0x04b8, 0x0601, 0x0100, 0x0100, @@ -539,17 +547,6 @@ UNUSUAL_DEV( 0x04e6, 0x0101, 0x0200, 0x0200, "CD-RW Device", US_SC_8020, US_PR_CB, NULL, 0), -/* Entry and supporting patch by Theodore Kilgore <kilgota@auburn.edu>. - * Device uses standards-violating 32-byte Bulk Command Block Wrappers and - * reports itself as "Proprietary SCSI Bulk." Cf. device entry 0x084d:0x0011. - */ - -UNUSUAL_DEV( 0x04fc, 0x80c2, 0x0100, 0x0100, - "Kobian Mercury", - "Binocam DCB-132", - US_SC_DEVICE, US_PR_DEVICE, NULL, - US_FL_BULK32), - #ifdef CONFIG_USB_STORAGE_USBAT UNUSUAL_DEV( 0x04e6, 0x1010, 0x0000, 0x9999, "Shuttle/SCM", @@ -565,6 +562,16 @@ UNUSUAL_DEV( 0x04e8, 0x507c, 0x0220, 0x0220, US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_MAX_SECTORS_64), +/* Entry and supporting patch by Theodore Kilgore <kilgota@auburn.edu>. + * Device uses standards-violating 32-byte Bulk Command Block Wrappers and + * reports itself as "Proprietary SCSI Bulk." Cf. device entry 0x084d:0x0011. + */ +UNUSUAL_DEV( 0x04fc, 0x80c2, 0x0100, 0x0100, + "Kobian Mercury", + "Binocam DCB-132", + US_SC_DEVICE, US_PR_DEVICE, NULL, + US_FL_BULK32), + /* Reported by Bob Sass <rls@vectordb.com> -- only rev 1.33 tested */ UNUSUAL_DEV( 0x050d, 0x0115, 0x0133, 0x0133, "Belkin", @@ -1304,6 +1311,16 @@ UNUSUAL_DEV( 0x0ace, 0x20ff, 0x0101, 0x0101, US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_IGNORE_DEVICE ), +/* Reported by F. Aben <f.aben@option.com> + * This device (wrongly) has a vendor-specific device descriptor. + * The entry is needed so usb-storage can bind to it's mass-storage + * interface as an interface driver */ +UNUSUAL_DEV( 0x0af0, 0x7401, 0x0000, 0x0000, + "Option", + "GI 0401 SD-Card", + US_SC_DEVICE, US_PR_DEVICE, NULL, + 0 ), + #ifdef CONFIG_USB_STORAGE_ISD200 UNUSUAL_DEV( 0x0bf6, 0xa001, 0x0100, 0x0110, "ATI", @@ -1361,13 +1378,6 @@ UNUSUAL_DEV( 0x0d96, 0x410a, 0x0001, 0xffff, US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_FIX_INQUIRY), -/* Reported by Rohan Hart <rohan.hart17@gmail.com> */ -UNUSUAL_DEV( 0x2770, 0x915d, 0x0010, 0x0010, - "INTOVA", - "Pixtreme", - US_SC_DEVICE, US_PR_DEVICE, NULL, - US_FL_FIX_CAPACITY ), - /* * Entry for Jenoptik JD 5200z3 * @@ -1684,6 +1694,16 @@ UNUSUAL_DEV( 0x1652, 0x6600, 0x0201, 0x0201, US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_IGNORE_RESIDUE ), +/* Reported by Mauro Andreolini <andreoli@weblab.ing.unimo.it> + * This entry is needed to bypass the ZeroCD mechanism + * and to properly load as a modem device. + */ +UNUSUAL_DEV( 0x19d2, 0x2000, 0x0000, 0x0000, + "Onda ET502HS", + "USB MMC Storage", + US_SC_DEVICE, US_PR_DEVICE, NULL, + US_FL_IGNORE_DEVICE), + /* patch submitted by Davide Perini <perini.davide@dpsoftware.org> * and Renato Perini <rperini@email.it> */ @@ -1721,6 +1741,13 @@ UNUSUAL_DEV( 0x2735, 0x100b, 0x0000, 0x9999, US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_GO_SLOW ), +/* Reported by Rohan Hart <rohan.hart17@gmail.com> */ +UNUSUAL_DEV( 0x2770, 0x915d, 0x0010, 0x0010, + "INTOVA", + "Pixtreme", + US_SC_DEVICE, US_PR_DEVICE, NULL, + US_FL_FIX_CAPACITY ), + /* * David Härdeman <david@2gen.com> * The key makes the SCSI stack print confusing (but harmless) messages @@ -1745,14 +1772,6 @@ UNUSUAL_DEV( 0xed06, 0x4500, 0x0001, 0x0001, US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_CAPACITY_HEURISTICS), -#ifdef CONFIG_USB_STORAGE_CYPRESS_ATACB -UNUSUAL_DEV( 0x04b4, 0x6830, 0x0000, 0x9999, - "Cypress", - "Cypress AT2LP", - US_SC_CYP_ATACB, US_PR_BULK, NULL, - 0), -#endif - /* Control/Bulk transport for all SubClass values */ USUAL_DEV(US_SC_RBC, US_PR_CB, USB_US_TYPE_STOR), USUAL_DEV(US_SC_8020, US_PR_CB, USB_US_TYPE_STOR), |