diff options
Diffstat (limited to 'drivers/usb')
40 files changed, 385 insertions, 362 deletions
diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index 61d75507d5d0..162c95a088ed 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -1596,6 +1596,7 @@ static const struct usb_device_id acm_ids[] = { { NOKIA_PCSUITE_ACM_INFO(0x00e9), }, /* Nokia 5320 XpressMusic */ { NOKIA_PCSUITE_ACM_INFO(0x0108), }, /* Nokia 5320 XpressMusic 2G */ { NOKIA_PCSUITE_ACM_INFO(0x01f5), }, /* Nokia N97, RM-505 */ + { NOKIA_PCSUITE_ACM_INFO(0x02e3), }, /* Nokia 5230, RM-588 */ /* NOTE: non-Nokia COMM/ACM/0xff is likely MSFT RNDIS... NOT a modem! */ diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c index de98a94d1853..a6bd53ace035 100644 --- a/drivers/usb/core/driver.c +++ b/drivers/usb/core/driver.c @@ -1272,8 +1272,7 @@ static int usb_resume_both(struct usb_device *udev, pm_message_t msg) static void choose_wakeup(struct usb_device *udev, pm_message_t msg) { - int w, i; - struct usb_interface *intf; + int w; /* Remote wakeup is needed only when we actually go to sleep. * For things like FREEZE and QUIESCE, if the device is already @@ -1285,16 +1284,10 @@ static void choose_wakeup(struct usb_device *udev, pm_message_t msg) return; } - /* If remote wakeup is permitted, see whether any interface drivers + /* Enable remote wakeup if it is allowed, even if no interface drivers * actually want it. */ - w = 0; - if (device_may_wakeup(&udev->dev) && udev->actconfig) { - for (i = 0; i < udev->actconfig->desc.bNumInterfaces; i++) { - intf = udev->actconfig->interface[i]; - w |= intf->needs_remote_wakeup; - } - } + w = device_may_wakeup(&udev->dev); /* If the device is autosuspended with the wrong wakeup setting, * autoresume now so the setting can be changed. diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 83e7bbbe97fa..70cccc75a362 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -1982,6 +1982,8 @@ static int hub_port_wait_reset(struct usb_hub *hub, int port1, (portstatus & USB_PORT_STAT_ENABLE)) { if (hub_is_wusb(hub)) udev->speed = USB_SPEED_WIRELESS; + else if (portstatus & USB_PORT_STAT_SUPER_SPEED) + udev->speed = USB_SPEED_SUPER; else if (portstatus & USB_PORT_STAT_HIGH_SPEED) udev->speed = USB_SPEED_HIGH; else if (portstatus & USB_PORT_STAT_LOW_SPEED) diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c index a73e08fdab36..fd4c36ea5e46 100644 --- a/drivers/usb/core/message.c +++ b/drivers/usb/core/message.c @@ -416,8 +416,11 @@ int usb_sg_init(struct usb_sg_request *io, struct usb_device *dev, /* A length of zero means transfer the whole sg list */ len = length; if (len == 0) { - for_each_sg(sg, sg, nents, i) - len += sg->length; + struct scatterlist *sg2; + int j; + + for_each_sg(sg, sg2, nents, j) + len += sg2->length; } } else { /* diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c index f22d03df8b17..db99c084df92 100644 --- a/drivers/usb/core/quirks.c +++ b/drivers/usb/core/quirks.c @@ -41,6 +41,10 @@ static const struct usb_device_id usb_quirk_list[] = { /* Philips PSC805 audio device */ { USB_DEVICE(0x0471, 0x0155), .driver_info = USB_QUIRK_RESET_RESUME }, + /* Artisman Watchdog Dongle */ + { USB_DEVICE(0x04b4, 0x0526), .driver_info = + USB_QUIRK_CONFIG_INTF_STRINGS }, + /* Roland SC-8820 */ { USB_DEVICE(0x0582, 0x0007), .driver_info = USB_QUIRK_RESET_RESUME }, @@ -64,6 +68,9 @@ static const struct usb_device_id usb_quirk_list[] = { /* X-Rite/Gretag-Macbeth Eye-One Pro display colorimeter */ { USB_DEVICE(0x0971, 0x2000), .driver_info = USB_QUIRK_NO_SET_INTF }, + /* Broadcom BCM92035DGROM BT dongle */ + { USB_DEVICE(0x0a5c, 0x2021), .driver_info = USB_QUIRK_RESET_RESUME }, + /* Action Semiconductor flash disk */ { USB_DEVICE(0x10d6, 0x2200), .driver_info = USB_QUIRK_STRING_FETCH_255 }, diff --git a/drivers/usb/gadget/f_eem.c b/drivers/usb/gadget/f_eem.c index 38226e9a371d..95dd4662d6a8 100644 --- a/drivers/usb/gadget/f_eem.c +++ b/drivers/usb/gadget/f_eem.c @@ -469,8 +469,7 @@ static int eem_unwrap(struct gether *port, crc = get_unaligned_le32(skb->data + len - ETH_FCS_LEN); crc2 = ~crc32_le(~0, - skb->data, - skb->len - ETH_FCS_LEN); + skb->data, len - ETH_FCS_LEN); } else { crc = get_unaligned_be32(skb->data + len - ETH_FCS_LEN); diff --git a/drivers/usb/gadget/f_fs.c b/drivers/usb/gadget/f_fs.c index d69eccf5f197..2aaa0f75c6cf 100644 --- a/drivers/usb/gadget/f_fs.c +++ b/drivers/usb/gadget/f_fs.c @@ -136,7 +136,7 @@ struct ffs_data { * handling setup requests immidiatelly user space may be so * slow that another setup will be sent to the gadget but this * time not to us but another function and then there could be - * a race. Is taht the case? Or maybe we can use cdev->req + * a race. Is that the case? Or maybe we can use cdev->req * after all, maybe we just need some spinlock for that? */ struct usb_request *ep0req; /* P: mutex */ struct completion ep0req_completion; /* P: mutex */ diff --git a/drivers/usb/gadget/f_mass_storage.c b/drivers/usb/gadget/f_mass_storage.c index 7d05a0be5c60..4ce899c9b165 100644 --- a/drivers/usb/gadget/f_mass_storage.c +++ b/drivers/usb/gadget/f_mass_storage.c @@ -321,8 +321,8 @@ struct fsg_dev; /* Data shared by all the FSG instances. */ struct fsg_common { struct usb_gadget *gadget; - struct fsg_dev *fsg; - struct fsg_dev *prev_fsg; + struct fsg_dev *fsg, *new_fsg; + wait_queue_head_t fsg_wait; /* filesem protects: backing files in use */ struct rw_semaphore filesem; @@ -351,7 +351,6 @@ struct fsg_common { enum fsg_state state; /* For exception handling */ unsigned int exception_req_tag; - u8 config, new_config; enum data_direction data_dir; u32 data_size; u32 data_size_from_cmnd; @@ -595,7 +594,7 @@ static int fsg_setup(struct usb_function *f, u16 w_value = le16_to_cpu(ctrl->wValue); u16 w_length = le16_to_cpu(ctrl->wLength); - if (!fsg->common->config) + if (!fsg_is_set(fsg->common)) return -EOPNOTSUPP; switch (ctrl->bRequest) { @@ -2303,24 +2302,20 @@ static int alloc_request(struct fsg_common *common, struct usb_ep *ep, return -ENOMEM; } -/* - * Reset interface setting and re-init endpoint state (toggle etc). - * Call with altsetting < 0 to disable the interface. The only other - * available altsetting is 0, which enables the interface. - */ -static int do_set_interface(struct fsg_common *common, int altsetting) +/* Reset interface setting and re-init endpoint state (toggle etc). */ +static int do_set_interface(struct fsg_common *common, struct fsg_dev *new_fsg) { - int rc = 0; - int i; - const struct usb_endpoint_descriptor *d; + const struct usb_endpoint_descriptor *d; + struct fsg_dev *fsg; + int i, rc = 0; if (common->running) DBG(common, "reset interface\n"); reset: /* Deallocate the requests */ - if (common->prev_fsg) { - struct fsg_dev *fsg = common->prev_fsg; + if (common->fsg) { + fsg = common->fsg; for (i = 0; i < FSG_NUM_BUFFERS; ++i) { struct fsg_buffhd *bh = &common->buffhds[i]; @@ -2345,88 +2340,53 @@ reset: fsg->bulk_out_enabled = 0; } - common->prev_fsg = 0; + common->fsg = NULL; + wake_up(&common->fsg_wait); } common->running = 0; - if (altsetting < 0 || rc != 0) + if (!new_fsg || rc) return rc; - DBG(common, "set interface %d\n", altsetting); + common->fsg = new_fsg; + fsg = common->fsg; - if (fsg_is_set(common)) { - struct fsg_dev *fsg = common->fsg; - common->prev_fsg = common->fsg; + /* Enable the endpoints */ + d = fsg_ep_desc(common->gadget, + &fsg_fs_bulk_in_desc, &fsg_hs_bulk_in_desc); + rc = enable_endpoint(common, fsg->bulk_in, d); + if (rc) + goto reset; + fsg->bulk_in_enabled = 1; + + d = fsg_ep_desc(common->gadget, + &fsg_fs_bulk_out_desc, &fsg_hs_bulk_out_desc); + rc = enable_endpoint(common, fsg->bulk_out, d); + if (rc) + goto reset; + fsg->bulk_out_enabled = 1; + common->bulk_out_maxpacket = le16_to_cpu(d->wMaxPacketSize); + clear_bit(IGNORE_BULK_OUT, &fsg->atomic_bitflags); - /* Enable the endpoints */ - d = fsg_ep_desc(common->gadget, - &fsg_fs_bulk_in_desc, &fsg_hs_bulk_in_desc); - rc = enable_endpoint(common, fsg->bulk_in, d); + /* Allocate the requests */ + for (i = 0; i < FSG_NUM_BUFFERS; ++i) { + struct fsg_buffhd *bh = &common->buffhds[i]; + + rc = alloc_request(common, fsg->bulk_in, &bh->inreq); if (rc) goto reset; - fsg->bulk_in_enabled = 1; - - d = fsg_ep_desc(common->gadget, - &fsg_fs_bulk_out_desc, &fsg_hs_bulk_out_desc); - rc = enable_endpoint(common, fsg->bulk_out, d); + rc = alloc_request(common, fsg->bulk_out, &bh->outreq); if (rc) goto reset; - fsg->bulk_out_enabled = 1; - common->bulk_out_maxpacket = le16_to_cpu(d->wMaxPacketSize); - clear_bit(IGNORE_BULK_OUT, &fsg->atomic_bitflags); - - /* Allocate the requests */ - for (i = 0; i < FSG_NUM_BUFFERS; ++i) { - struct fsg_buffhd *bh = &common->buffhds[i]; - - rc = alloc_request(common, fsg->bulk_in, &bh->inreq); - if (rc) - goto reset; - rc = alloc_request(common, fsg->bulk_out, &bh->outreq); - if (rc) - goto reset; - bh->inreq->buf = bh->outreq->buf = bh->buf; - bh->inreq->context = bh->outreq->context = bh; - bh->inreq->complete = bulk_in_complete; - bh->outreq->complete = bulk_out_complete; - } - - common->running = 1; - for (i = 0; i < common->nluns; ++i) - common->luns[i].unit_attention_data = SS_RESET_OCCURRED; - return rc; - } else { - return -EIO; - } -} - - -/* - * Change our operational configuration. This code must agree with the code - * that returns config descriptors, and with interface altsetting code. - * - * It's also responsible for power management interactions. Some - * configurations might not work with our current power sources. - * For now we just assume the gadget is always self-powered. - */ -static int do_set_config(struct fsg_common *common, u8 new_config) -{ - int rc = 0; - - /* Disable the single interface */ - if (common->config != 0) { - DBG(common, "reset config\n"); - common->config = 0; - rc = do_set_interface(common, -1); + bh->inreq->buf = bh->outreq->buf = bh->buf; + bh->inreq->context = bh->outreq->context = bh; + bh->inreq->complete = bulk_in_complete; + bh->outreq->complete = bulk_out_complete; } - /* Enable the interface */ - if (new_config != 0) { - common->config = new_config; - rc = do_set_interface(common, 0); - if (rc != 0) - common->config = 0; /* Reset on errors */ - } + common->running = 1; + for (i = 0; i < common->nluns; ++i) + common->luns[i].unit_attention_data = SS_RESET_OCCURRED; return rc; } @@ -2437,9 +2397,7 @@ static int do_set_config(struct fsg_common *common, u8 new_config) static int fsg_set_alt(struct usb_function *f, unsigned intf, unsigned alt) { struct fsg_dev *fsg = fsg_from_func(f); - fsg->common->prev_fsg = fsg->common->fsg; - fsg->common->fsg = fsg; - fsg->common->new_config = 1; + fsg->common->new_fsg = fsg; raise_exception(fsg->common, FSG_STATE_CONFIG_CHANGE); return 0; } @@ -2447,9 +2405,7 @@ static int fsg_set_alt(struct usb_function *f, unsigned intf, unsigned alt) static void fsg_disable(struct usb_function *f) { struct fsg_dev *fsg = fsg_from_func(f); - fsg->common->prev_fsg = fsg->common->fsg; - fsg->common->fsg = fsg; - fsg->common->new_config = 0; + fsg->common->new_fsg = NULL; raise_exception(fsg->common, FSG_STATE_CONFIG_CHANGE); } @@ -2459,19 +2415,17 @@ static void fsg_disable(struct usb_function *f) static void handle_exception(struct fsg_common *common) { siginfo_t info; - int sig; int i; struct fsg_buffhd *bh; enum fsg_state old_state; - u8 new_config; struct fsg_lun *curlun; unsigned int exception_req_tag; - int rc; /* Clear the existing signals. Anything but SIGUSR1 is converted * into a high-priority EXIT exception. */ for (;;) { - sig = dequeue_signal_lock(current, ¤t->blocked, &info); + int sig = + dequeue_signal_lock(current, ¤t->blocked, &info); if (!sig) break; if (sig != SIGUSR1) { @@ -2482,7 +2436,7 @@ static void handle_exception(struct fsg_common *common) } /* Cancel all the pending transfers */ - if (fsg_is_set(common)) { + if (likely(common->fsg)) { for (i = 0; i < FSG_NUM_BUFFERS; ++i) { bh = &common->buffhds[i]; if (bh->inreq_busy) @@ -2523,7 +2477,6 @@ static void handle_exception(struct fsg_common *common) common->next_buffhd_to_fill = &common->buffhds[0]; common->next_buffhd_to_drain = &common->buffhds[0]; exception_req_tag = common->exception_req_tag; - new_config = common->new_config; old_state = common->state; if (old_state == FSG_STATE_ABORT_BULK_OUT) @@ -2573,12 +2526,12 @@ static void handle_exception(struct fsg_common *common) break; case FSG_STATE_CONFIG_CHANGE: - rc = do_set_config(common, new_config); + do_set_interface(common, common->new_fsg); break; case FSG_STATE_EXIT: case FSG_STATE_TERMINATED: - do_set_config(common, 0); /* Free resources */ + do_set_interface(common, NULL); /* Free resources */ spin_lock_irq(&common->lock); common->state = FSG_STATE_TERMINATED; /* Stop the thread */ spin_unlock_irq(&common->lock); @@ -2863,6 +2816,7 @@ buffhds_first_it: goto error_release; } init_completion(&common->thread_notifier); + init_waitqueue_head(&common->fsg_wait); #undef OR @@ -2957,9 +2911,17 @@ static void fsg_common_release(struct kref *ref) static void fsg_unbind(struct usb_configuration *c, struct usb_function *f) { struct fsg_dev *fsg = fsg_from_func(f); + struct fsg_common *common = fsg->common; DBG(fsg, "unbind\n"); - fsg_common_put(fsg->common); + if (fsg->common->fsg == fsg) { + fsg->common->new_fsg = NULL; + raise_exception(fsg->common, FSG_STATE_CONFIG_CHANGE); + /* FIXME: make interruptible or killable somehow? */ + wait_event(common->fsg_wait, common->fsg != fsg); + } + + fsg_common_put(common); usb_free_descriptors(fsg->function.descriptors); usb_free_descriptors(fsg->function.hs_descriptors); kfree(fsg); @@ -2970,7 +2932,6 @@ static int fsg_bind(struct usb_configuration *c, struct usb_function *f) { struct fsg_dev *fsg = fsg_from_func(f); struct usb_gadget *gadget = c->cdev->gadget; - int rc; int i; struct usb_ep *ep; @@ -2996,6 +2957,11 @@ static int fsg_bind(struct usb_configuration *c, struct usb_function *f) ep->driver_data = fsg->common; /* claim the endpoint */ fsg->bulk_out = ep; + /* Copy descriptors */ + f->descriptors = usb_copy_descriptors(fsg_fs_function); + if (unlikely(!f->descriptors)) + return -ENOMEM; + if (gadget_is_dualspeed(gadget)) { /* Assume endpoint addresses are the same for both speeds */ fsg_hs_bulk_in_desc.bEndpointAddress = @@ -3003,16 +2969,17 @@ static int fsg_bind(struct usb_configuration *c, struct usb_function *f) fsg_hs_bulk_out_desc.bEndpointAddress = fsg_fs_bulk_out_desc.bEndpointAddress; f->hs_descriptors = usb_copy_descriptors(fsg_hs_function); - if (unlikely(!f->hs_descriptors)) + if (unlikely(!f->hs_descriptors)) { + usb_free_descriptors(f->descriptors); return -ENOMEM; + } } return 0; autoconf_fail: ERROR(fsg, "unable to autoconfigure all endpoints\n"); - rc = -ENOTSUPP; - return rc; + return -ENOTSUPP; } @@ -3036,11 +3003,6 @@ static int fsg_add(struct usb_composite_dev *cdev, fsg->function.name = FSG_DRIVER_DESC; fsg->function.strings = fsg_strings_array; - fsg->function.descriptors = usb_copy_descriptors(fsg_fs_function); - if (unlikely(!fsg->function.descriptors)) { - rc = -ENOMEM; - goto error_free_fsg; - } fsg->function.bind = fsg_bind; fsg->function.unbind = fsg_unbind; fsg->function.setup = fsg_setup; @@ -3056,19 +3018,9 @@ static int fsg_add(struct usb_composite_dev *cdev, rc = usb_add_function(c, &fsg->function); if (unlikely(rc)) - goto error_free_all; - - fsg_common_get(fsg->common); - return 0; - -error_free_all: - usb_free_descriptors(fsg->function.descriptors); - /* fsg_bind() might have copied those; or maybe not? who cares - * -- free it just in case. */ - usb_free_descriptors(fsg->function.hs_descriptors); -error_free_fsg: - kfree(fsg); - + kfree(fsg); + else + fsg_common_get(fsg->common); return rc; } diff --git a/drivers/usb/gadget/f_uvc.c b/drivers/usb/gadget/f_uvc.c index fc2611f8b326..dbe6db0184fd 100644 --- a/drivers/usb/gadget/f_uvc.c +++ b/drivers/usb/gadget/f_uvc.c @@ -28,7 +28,7 @@ #include "uvc.h" -unsigned int uvc_trace_param; +unsigned int uvc_gadget_trace_param; /* -------------------------------------------------------------------------- * Function descriptors @@ -656,6 +656,6 @@ error: return ret; } -module_param_named(trace, uvc_trace_param, uint, S_IRUGO|S_IWUSR); +module_param_named(trace, uvc_gadget_trace_param, uint, S_IRUGO|S_IWUSR); MODULE_PARM_DESC(trace, "Trace level bitmask"); diff --git a/drivers/usb/gadget/g_ffs.c b/drivers/usb/gadget/g_ffs.c index 4b0e4a040d6f..d1af253a9105 100644 --- a/drivers/usb/gadget/g_ffs.c +++ b/drivers/usb/gadget/g_ffs.c @@ -392,6 +392,17 @@ static int __gfs_do_config(struct usb_configuration *c, if (unlikely(ret < 0)) return ret; + /* After previous do_configs there may be some invalid + * pointers in c->interface array. This happens every time + * a user space function with fewer interfaces than a user + * space function that was run before the new one is run. The + * compasit's set_config() assumes that if there is no more + * then MAX_CONFIG_INTERFACES interfaces in a configuration + * then there is a NULL pointer after the last interface in + * c->interface array. We need to make sure this is true. */ + if (c->next_interface_id < ARRAY_SIZE(c->interface)) + c->interface[c->next_interface_id] = NULL; + return 0; } diff --git a/drivers/usb/gadget/printer.c b/drivers/usb/gadget/printer.c index 43abf55d8c60..4c3ac5c42237 100644 --- a/drivers/usb/gadget/printer.c +++ b/drivers/usb/gadget/printer.c @@ -82,7 +82,7 @@ static struct class *usb_gadget_class; struct printer_dev { spinlock_t lock; /* lock this structure */ /* lock buffer lists during read/write calls */ - spinlock_t lock_printer_io; + struct mutex lock_printer_io; struct usb_gadget *gadget; struct usb_request *req; /* for control responses */ u8 config; @@ -567,7 +567,7 @@ printer_read(struct file *fd, char __user *buf, size_t len, loff_t *ptr) DBG(dev, "printer_read trying to read %d bytes\n", (int)len); - spin_lock(&dev->lock_printer_io); + mutex_lock(&dev->lock_printer_io); spin_lock_irqsave(&dev->lock, flags); /* We will use this flag later to check if a printer reset happened @@ -601,7 +601,7 @@ printer_read(struct file *fd, char __user *buf, size_t len, loff_t *ptr) * call or not. */ if (fd->f_flags & (O_NONBLOCK|O_NDELAY)) { - spin_unlock(&dev->lock_printer_io); + mutex_unlock(&dev->lock_printer_io); return -EAGAIN; } @@ -648,7 +648,7 @@ printer_read(struct file *fd, char __user *buf, size_t len, loff_t *ptr) if (dev->reset_printer) { list_add(¤t_rx_req->list, &dev->rx_reqs); spin_unlock_irqrestore(&dev->lock, flags); - spin_unlock(&dev->lock_printer_io); + mutex_unlock(&dev->lock_printer_io); return -EAGAIN; } @@ -673,7 +673,7 @@ printer_read(struct file *fd, char __user *buf, size_t len, loff_t *ptr) dev->current_rx_buf = current_rx_buf; spin_unlock_irqrestore(&dev->lock, flags); - spin_unlock(&dev->lock_printer_io); + mutex_unlock(&dev->lock_printer_io); DBG(dev, "printer_read returned %d bytes\n", (int)bytes_copied); @@ -697,7 +697,7 @@ printer_write(struct file *fd, const char __user *buf, size_t len, loff_t *ptr) if (len == 0) return -EINVAL; - spin_lock(&dev->lock_printer_io); + mutex_lock(&dev->lock_printer_io); spin_lock_irqsave(&dev->lock, flags); /* Check if a printer reset happens while we have interrupts on */ @@ -713,7 +713,7 @@ printer_write(struct file *fd, const char __user *buf, size_t len, loff_t *ptr) * a NON-Blocking call or not. */ if (fd->f_flags & (O_NONBLOCK|O_NDELAY)) { - spin_unlock(&dev->lock_printer_io); + mutex_unlock(&dev->lock_printer_io); return -EAGAIN; } @@ -752,7 +752,7 @@ printer_write(struct file *fd, const char __user *buf, size_t len, loff_t *ptr) if (copy_from_user(req->buf, buf, size)) { list_add(&req->list, &dev->tx_reqs); - spin_unlock(&dev->lock_printer_io); + mutex_unlock(&dev->lock_printer_io); return bytes_copied; } @@ -766,14 +766,14 @@ printer_write(struct file *fd, const char __user *buf, size_t len, loff_t *ptr) if (dev->reset_printer) { list_add(&req->list, &dev->tx_reqs); spin_unlock_irqrestore(&dev->lock, flags); - spin_unlock(&dev->lock_printer_io); + mutex_unlock(&dev->lock_printer_io); return -EAGAIN; } if (usb_ep_queue(dev->in_ep, req, GFP_ATOMIC)) { list_add(&req->list, &dev->tx_reqs); spin_unlock_irqrestore(&dev->lock, flags); - spin_unlock(&dev->lock_printer_io); + mutex_unlock(&dev->lock_printer_io); return -EAGAIN; } @@ -782,7 +782,7 @@ printer_write(struct file *fd, const char __user *buf, size_t len, loff_t *ptr) } spin_unlock_irqrestore(&dev->lock, flags); - spin_unlock(&dev->lock_printer_io); + mutex_unlock(&dev->lock_printer_io); DBG(dev, "printer_write sent %d bytes\n", (int)bytes_copied); @@ -820,11 +820,11 @@ printer_poll(struct file *fd, poll_table *wait) unsigned long flags; int status = 0; - spin_lock(&dev->lock_printer_io); + mutex_lock(&dev->lock_printer_io); spin_lock_irqsave(&dev->lock, flags); setup_rx_reqs(dev); spin_unlock_irqrestore(&dev->lock, flags); - spin_unlock(&dev->lock_printer_io); + mutex_unlock(&dev->lock_printer_io); poll_wait(fd, &dev->rx_wait, wait); poll_wait(fd, &dev->tx_wait, wait); @@ -1461,7 +1461,7 @@ autoconf_fail: } spin_lock_init(&dev->lock); - spin_lock_init(&dev->lock_printer_io); + mutex_init(&dev->lock_printer_io); INIT_LIST_HEAD(&dev->tx_reqs); INIT_LIST_HEAD(&dev->tx_reqs_active); INIT_LIST_HEAD(&dev->rx_reqs); @@ -1594,7 +1594,7 @@ cleanup(void) { int status; - spin_lock(&usb_printer_gadget.lock_printer_io); + mutex_lock(&usb_printer_gadget.lock_printer_io); class_destroy(usb_gadget_class); unregister_chrdev_region(g_printer_devno, 2); @@ -1602,6 +1602,6 @@ cleanup(void) if (status) ERROR(dev, "usb_gadget_unregister_driver %x\n", status); - spin_unlock(&usb_printer_gadget.lock_printer_io); + mutex_unlock(&usb_printer_gadget.lock_printer_io); } module_exit(cleanup); diff --git a/drivers/usb/gadget/pxa27x_udc.c b/drivers/usb/gadget/pxa27x_udc.c index 85b0d8921eae..980762453a9c 100644 --- a/drivers/usb/gadget/pxa27x_udc.c +++ b/drivers/usb/gadget/pxa27x_udc.c @@ -2561,7 +2561,7 @@ static void pxa_udc_shutdown(struct platform_device *_dev) udc_disable(udc); } -#ifdef CONFIG_CPU_PXA27x +#ifdef CONFIG_PXA27x extern void pxa27x_clear_otgph(void); #else #define pxa27x_clear_otgph() do {} while (0) diff --git a/drivers/usb/gadget/s3c2410_udc.c b/drivers/usb/gadget/s3c2410_udc.c index d5f4c1d45c97..ea2b3c7ebee5 100644 --- a/drivers/usb/gadget/s3c2410_udc.c +++ b/drivers/usb/gadget/s3c2410_udc.c @@ -735,6 +735,10 @@ static void s3c2410_udc_handle_ep0_idle(struct s3c2410_udc *dev, else dev->ep0state = EP0_OUT_DATA_PHASE; + if (!dev->driver) + return; + + /* deliver the request to the gadget driver */ ret = dev->driver->setup(&dev->gadget, crq); if (ret < 0) { if (dev->req_config) { @@ -1700,9 +1704,13 @@ int usb_gadget_unregister_driver(struct usb_gadget_driver *driver) if (!driver || driver != udc->driver || !driver->unbind) return -EINVAL; - dprintk(DEBUG_NORMAL,"usb_gadget_register_driver() '%s'\n", + dprintk(DEBUG_NORMAL, "usb_gadget_unregister_driver() '%s'\n", driver->driver.name); + /* report disconnect */ + if (driver->disconnect) + driver->disconnect(&udc->gadget); + driver->unbind(&udc->gadget); device_del(&udc->gadget.dev); diff --git a/drivers/usb/gadget/u_serial.c b/drivers/usb/gadget/u_serial.c index 16bdf77f582a..3e8dcb5455e3 100644 --- a/drivers/usb/gadget/u_serial.c +++ b/drivers/usb/gadget/u_serial.c @@ -536,17 +536,11 @@ recycle: list_move(&req->list, &port->read_pool); } - /* Push from tty to ldisc; this is immediate with low_latency, and - * may trigger callbacks to this driver ... so drop the spinlock. + /* Push from tty to ldisc; without low_latency set this is handled by + * a workqueue, so we won't get callbacks and can hold port_lock */ if (tty && do_push) { - spin_unlock_irq(&port->port_lock); tty_flip_buffer_push(tty); - wake_up_interruptible(&tty->read_wait); - spin_lock_irq(&port->port_lock); - - /* tty may have been closed */ - tty = port->port_tty; } @@ -784,11 +778,6 @@ static int gs_open(struct tty_struct *tty, struct file *file) port->open_count = 1; port->openclose = false; - /* low_latency means ldiscs work in tasklet context, without - * needing a workqueue schedule ... easier to keep up. - */ - tty->low_latency = 1; - /* if connected, start the I/O stream */ if (port->port_usb) { struct gserial *gser = port->port_usb; @@ -1195,6 +1184,7 @@ void gserial_cleanup(void) n_ports = 0; tty_unregister_driver(gs_tty_driver); + put_tty_driver(gs_tty_driver); gs_tty_driver = NULL; pr_debug("%s: cleaned up ttyGS* support\n", __func__); diff --git a/drivers/usb/gadget/uvc.h b/drivers/usb/gadget/uvc.h index 0a705e63c936..e92454cddd7d 100644 --- a/drivers/usb/gadget/uvc.h +++ b/drivers/usb/gadget/uvc.h @@ -107,11 +107,11 @@ struct uvc_streaming_control { #define UVC_WARN_MINMAX 0 #define UVC_WARN_PROBE_DEF 1 -extern unsigned int uvc_trace_param; +extern unsigned int uvc_gadget_trace_param; #define uvc_trace(flag, msg...) \ do { \ - if (uvc_trace_param & flag) \ + if (uvc_gadget_trace_param & flag) \ printk(KERN_DEBUG "uvcvideo: " msg); \ } while (0) @@ -220,16 +220,10 @@ struct uvc_file_handle #define to_uvc_file_handle(handle) \ container_of(handle, struct uvc_file_handle, vfh) -extern struct v4l2_file_operations uvc_v4l2_fops; - /* ------------------------------------------------------------------------ * Functions */ -extern int uvc_video_enable(struct uvc_video *video, int enable); -extern int uvc_video_init(struct uvc_video *video); -extern int uvc_video_pump(struct uvc_video *video); - extern void uvc_endpoint_stream(struct uvc_device *dev); extern void uvc_function_connect(struct uvc_device *uvc); diff --git a/drivers/usb/gadget/uvc_queue.c b/drivers/usb/gadget/uvc_queue.c index 43891991bf21..f7395ac5dc17 100644 --- a/drivers/usb/gadget/uvc_queue.c +++ b/drivers/usb/gadget/uvc_queue.c @@ -78,7 +78,8 @@ * */ -void uvc_queue_init(struct uvc_video_queue *queue, enum v4l2_buf_type type) +static void +uvc_queue_init(struct uvc_video_queue *queue, enum v4l2_buf_type type) { mutex_init(&queue->mutex); spin_lock_init(&queue->irqlock); @@ -88,6 +89,28 @@ void uvc_queue_init(struct uvc_video_queue *queue, enum v4l2_buf_type type) } /* + * Free the video buffers. + * + * This function must be called with the queue lock held. + */ +static int uvc_free_buffers(struct uvc_video_queue *queue) +{ + unsigned int i; + + for (i = 0; i < queue->count; ++i) { + if (queue->buffer[i].vma_use_count != 0) + return -EBUSY; + } + + if (queue->count) { + vfree(queue->mem); + queue->count = 0; + } + + return 0; +} + +/* * Allocate the video buffers. * * Pages are reserved to make sure they will not be swapped, as they will be @@ -95,8 +118,9 @@ void uvc_queue_init(struct uvc_video_queue *queue, enum v4l2_buf_type type) * * Buffers will be individually mapped, so they must all be page aligned. */ -int uvc_alloc_buffers(struct uvc_video_queue *queue, unsigned int nbuffers, - unsigned int buflength) +static int +uvc_alloc_buffers(struct uvc_video_queue *queue, unsigned int nbuffers, + unsigned int buflength) { unsigned int bufsize = PAGE_ALIGN(buflength); unsigned int i; @@ -150,28 +174,6 @@ done: return ret; } -/* - * Free the video buffers. - * - * This function must be called with the queue lock held. - */ -int uvc_free_buffers(struct uvc_video_queue *queue) -{ - unsigned int i; - - for (i = 0; i < queue->count; ++i) { - if (queue->buffer[i].vma_use_count != 0) - return -EBUSY; - } - - if (queue->count) { - vfree(queue->mem); - queue->count = 0; - } - - return 0; -} - static void __uvc_query_buffer(struct uvc_buffer *buf, struct v4l2_buffer *v4l2_buf) { @@ -195,8 +197,8 @@ static void __uvc_query_buffer(struct uvc_buffer *buf, } } -int uvc_query_buffer(struct uvc_video_queue *queue, - struct v4l2_buffer *v4l2_buf) +static int +uvc_query_buffer(struct uvc_video_queue *queue, struct v4l2_buffer *v4l2_buf) { int ret = 0; @@ -217,8 +219,8 @@ done: * Queue a video buffer. Attempting to queue a buffer that has already been * queued will return -EINVAL. */ -int uvc_queue_buffer(struct uvc_video_queue *queue, - struct v4l2_buffer *v4l2_buf) +static int +uvc_queue_buffer(struct uvc_video_queue *queue, struct v4l2_buffer *v4l2_buf) { struct uvc_buffer *buf; unsigned long flags; @@ -298,8 +300,9 @@ static int uvc_queue_waiton(struct uvc_buffer *buf, int nonblocking) * Dequeue a video buffer. If nonblocking is false, block until a buffer is * available. */ -int uvc_dequeue_buffer(struct uvc_video_queue *queue, - struct v4l2_buffer *v4l2_buf, int nonblocking) +static int +uvc_dequeue_buffer(struct uvc_video_queue *queue, struct v4l2_buffer *v4l2_buf, + int nonblocking) { struct uvc_buffer *buf; int ret = 0; @@ -359,8 +362,9 @@ done: * This function implements video queue polling and is intended to be used by * the device poll handler. */ -unsigned int uvc_queue_poll(struct uvc_video_queue *queue, struct file *file, - poll_table *wait) +static unsigned int +uvc_queue_poll(struct uvc_video_queue *queue, struct file *file, + poll_table *wait) { struct uvc_buffer *buf; unsigned int mask = 0; @@ -407,7 +411,8 @@ static struct vm_operations_struct uvc_vm_ops = { * This function implements video buffer memory mapping and is intended to be * used by the device mmap handler. */ -int uvc_queue_mmap(struct uvc_video_queue *queue, struct vm_area_struct *vma) +static int +uvc_queue_mmap(struct uvc_video_queue *queue, struct vm_area_struct *vma) { struct uvc_buffer *uninitialized_var(buffer); struct page *page; @@ -458,6 +463,42 @@ done: } /* + * Cancel the video buffers queue. + * + * Cancelling the queue marks all buffers on the irq queue as erroneous, + * wakes them up and removes them from the queue. + * + * If the disconnect parameter is set, further calls to uvc_queue_buffer will + * fail with -ENODEV. + * + * This function acquires the irq spinlock and can be called from interrupt + * context. + */ +static void uvc_queue_cancel(struct uvc_video_queue *queue, int disconnect) +{ + struct uvc_buffer *buf; + unsigned long flags; + + spin_lock_irqsave(&queue->irqlock, flags); + while (!list_empty(&queue->irqqueue)) { + buf = list_first_entry(&queue->irqqueue, struct uvc_buffer, + queue); + list_del(&buf->queue); + buf->state = UVC_BUF_STATE_ERROR; + wake_up(&buf->wait); + } + /* This must be protected by the irqlock spinlock to avoid race + * conditions between uvc_queue_buffer and the disconnection event that + * could result in an interruptible wait in uvc_dequeue_buffer. Do not + * blindly replace this logic by checking for the UVC_DEV_DISCONNECTED + * state outside the queue code. + */ + if (disconnect) + queue->flags |= UVC_QUEUE_DISCONNECTED; + spin_unlock_irqrestore(&queue->irqlock, flags); +} + +/* * Enable or disable the video buffers queue. * * The queue must be enabled before starting video acquisition and must be @@ -474,7 +515,7 @@ done: * This function can't be called from interrupt context. Use * uvc_queue_cancel() instead. */ -int uvc_queue_enable(struct uvc_video_queue *queue, int enable) +static int uvc_queue_enable(struct uvc_video_queue *queue, int enable) { unsigned int i; int ret = 0; @@ -503,44 +544,8 @@ done: return ret; } -/* - * Cancel the video buffers queue. - * - * Cancelling the queue marks all buffers on the irq queue as erroneous, - * wakes them up and removes them from the queue. - * - * If the disconnect parameter is set, further calls to uvc_queue_buffer will - * fail with -ENODEV. - * - * This function acquires the irq spinlock and can be called from interrupt - * context. - */ -void uvc_queue_cancel(struct uvc_video_queue *queue, int disconnect) -{ - struct uvc_buffer *buf; - unsigned long flags; - - spin_lock_irqsave(&queue->irqlock, flags); - while (!list_empty(&queue->irqqueue)) { - buf = list_first_entry(&queue->irqqueue, struct uvc_buffer, - queue); - list_del(&buf->queue); - buf->state = UVC_BUF_STATE_ERROR; - wake_up(&buf->wait); - } - /* This must be protected by the irqlock spinlock to avoid race - * conditions between uvc_queue_buffer and the disconnection event that - * could result in an interruptible wait in uvc_dequeue_buffer. Do not - * blindly replace this logic by checking for the UVC_DEV_DISCONNECTED - * state outside the queue code. - */ - if (disconnect) - queue->flags |= UVC_QUEUE_DISCONNECTED; - spin_unlock_irqrestore(&queue->irqlock, flags); -} - -struct uvc_buffer *uvc_queue_next_buffer(struct uvc_video_queue *queue, - struct uvc_buffer *buf) +static struct uvc_buffer * +uvc_queue_next_buffer(struct uvc_video_queue *queue, struct uvc_buffer *buf) { struct uvc_buffer *nextbuf; unsigned long flags; @@ -568,7 +573,7 @@ struct uvc_buffer *uvc_queue_next_buffer(struct uvc_video_queue *queue, return nextbuf; } -struct uvc_buffer *uvc_queue_head(struct uvc_video_queue *queue) +static struct uvc_buffer *uvc_queue_head(struct uvc_video_queue *queue) { struct uvc_buffer *buf = NULL; diff --git a/drivers/usb/gadget/uvc_queue.h b/drivers/usb/gadget/uvc_queue.h index 7f5a33fe7ae2..1812a8ecc5d0 100644 --- a/drivers/usb/gadget/uvc_queue.h +++ b/drivers/usb/gadget/uvc_queue.h @@ -58,30 +58,10 @@ struct uvc_video_queue { struct list_head irqqueue; }; -extern void uvc_queue_init(struct uvc_video_queue *queue, - enum v4l2_buf_type type); -extern int uvc_alloc_buffers(struct uvc_video_queue *queue, - unsigned int nbuffers, unsigned int buflength); -extern int uvc_free_buffers(struct uvc_video_queue *queue); -extern int uvc_query_buffer(struct uvc_video_queue *queue, - struct v4l2_buffer *v4l2_buf); -extern int uvc_queue_buffer(struct uvc_video_queue *queue, - struct v4l2_buffer *v4l2_buf); -extern int uvc_dequeue_buffer(struct uvc_video_queue *queue, - struct v4l2_buffer *v4l2_buf, int nonblocking); -extern int uvc_queue_enable(struct uvc_video_queue *queue, int enable); -extern void uvc_queue_cancel(struct uvc_video_queue *queue, int disconnect); -extern struct uvc_buffer *uvc_queue_next_buffer(struct uvc_video_queue *queue, - struct uvc_buffer *buf); -extern unsigned int uvc_queue_poll(struct uvc_video_queue *queue, - struct file *file, poll_table *wait); -extern int uvc_queue_mmap(struct uvc_video_queue *queue, - struct vm_area_struct *vma); static inline int uvc_queue_streaming(struct uvc_video_queue *queue) { return queue->flags & UVC_QUEUE_STREAMING; } -extern struct uvc_buffer *uvc_queue_head(struct uvc_video_queue *queue); #endif /* __KERNEL__ */ diff --git a/drivers/usb/gadget/uvc_v4l2.c b/drivers/usb/gadget/uvc_v4l2.c index a7989f29837e..2dcffdac86d2 100644 --- a/drivers/usb/gadget/uvc_v4l2.c +++ b/drivers/usb/gadget/uvc_v4l2.c @@ -363,7 +363,7 @@ uvc_v4l2_poll(struct file *file, poll_table *wait) return mask; } -struct v4l2_file_operations uvc_v4l2_fops = { +static struct v4l2_file_operations uvc_v4l2_fops = { .owner = THIS_MODULE, .open = uvc_v4l2_open, .release = uvc_v4l2_release, diff --git a/drivers/usb/gadget/uvc_video.c b/drivers/usb/gadget/uvc_video.c index de8cbc46518d..b08f35438d70 100644 --- a/drivers/usb/gadget/uvc_video.c +++ b/drivers/usb/gadget/uvc_video.c @@ -271,7 +271,7 @@ error: * This function fills the available USB requests (listed in req_free) with * video data from the queued buffers. */ -int +static int uvc_video_pump(struct uvc_video *video) { struct usb_request *req; @@ -328,7 +328,7 @@ uvc_video_pump(struct uvc_video *video) /* * Enable or disable the video stream. */ -int +static int uvc_video_enable(struct uvc_video *video, int enable) { unsigned int i; @@ -367,7 +367,7 @@ uvc_video_enable(struct uvc_video *video, int enable) /* * Initialize the UVC video stream. */ -int +static int uvc_video_init(struct uvc_video *video) { INIT_LIST_HEAD(&video->req_free); diff --git a/drivers/usb/gadget/webcam.c b/drivers/usb/gadget/webcam.c index 417fd6887698..f5f3030cc416 100644 --- a/drivers/usb/gadget/webcam.c +++ b/drivers/usb/gadget/webcam.c @@ -28,10 +28,10 @@ #include "config.c" #include "epautoconf.c" -#include "f_uvc.c" #include "uvc_queue.c" -#include "uvc_v4l2.c" #include "uvc_video.c" +#include "uvc_v4l2.c" +#include "f_uvc.c" /* -------------------------------------------------------------------------- * Device descriptor diff --git a/drivers/usb/host/ehci-mxc.c b/drivers/usb/host/ehci-mxc.c index 544ccfd7056e..bd4027745aa7 100644 --- a/drivers/usb/host/ehci-mxc.c +++ b/drivers/usb/host/ehci-mxc.c @@ -207,10 +207,17 @@ static int ehci_mxc_drv_probe(struct platform_device *pdev) /* Initialize the transceiver */ if (pdata->otg) { pdata->otg->io_priv = hcd->regs + ULPI_VIEWPORT_OFFSET; - if (otg_init(pdata->otg) != 0) - dev_err(dev, "unable to init transceiver\n"); - else if (otg_set_vbus(pdata->otg, 1) != 0) + ret = otg_init(pdata->otg); + if (ret) { + dev_err(dev, "unable to init transceiver, probably missing\n"); + ret = -ENODEV; + goto err_add; + } + ret = otg_set_vbus(pdata->otg, 1); + if (ret) { dev_err(dev, "unable to enable vbus on transceiver\n"); + goto err_add; + } } priv->hcd = hcd; diff --git a/drivers/usb/host/isp1362-hcd.c b/drivers/usb/host/isp1362-hcd.c index 20a0dfe0fe36..0587ad4ce5c2 100644 --- a/drivers/usb/host/isp1362-hcd.c +++ b/drivers/usb/host/isp1362-hcd.c @@ -2224,12 +2224,9 @@ static void remove_debug_file(struct isp1362_hcd *isp1362_hcd) /*-------------------------------------------------------------------------*/ -static void isp1362_sw_reset(struct isp1362_hcd *isp1362_hcd) +static void __isp1362_sw_reset(struct isp1362_hcd *isp1362_hcd) { int tmp = 20; - unsigned long flags; - - spin_lock_irqsave(&isp1362_hcd->lock, flags); isp1362_write_reg16(isp1362_hcd, HCSWRES, HCSWRES_MAGIC); isp1362_write_reg32(isp1362_hcd, HCCMDSTAT, OHCI_HCR); @@ -2240,6 +2237,14 @@ static void isp1362_sw_reset(struct isp1362_hcd *isp1362_hcd) } if (!tmp) pr_err("Software reset timeout\n"); +} + +static void isp1362_sw_reset(struct isp1362_hcd *isp1362_hcd) +{ + unsigned long flags; + + spin_lock_irqsave(&isp1362_hcd->lock, flags); + __isp1362_sw_reset(isp1362_hcd); spin_unlock_irqrestore(&isp1362_hcd->lock, flags); } @@ -2418,7 +2423,7 @@ static void isp1362_hc_stop(struct usb_hcd *hcd) if (isp1362_hcd->board && isp1362_hcd->board->reset) isp1362_hcd->board->reset(hcd->self.controller, 1); else - isp1362_sw_reset(isp1362_hcd); + __isp1362_sw_reset(isp1362_hcd); if (isp1362_hcd->board && isp1362_hcd->board->clock) isp1362_hcd->board->clock(hcd->self.controller, 0); diff --git a/drivers/usb/host/ohci-pxa27x.c b/drivers/usb/host/ohci-pxa27x.c index a18debdd79b8..418163894775 100644 --- a/drivers/usb/host/ohci-pxa27x.c +++ b/drivers/usb/host/ohci-pxa27x.c @@ -203,7 +203,7 @@ static inline void pxa27x_reset_hc(struct pxa27x_ohci *ohci) __raw_writel(uhchr & ~UHCHR_FHR, ohci->mmio_base + UHCHR); } -#ifdef CONFIG_CPU_PXA27x +#ifdef CONFIG_PXA27x extern void pxa27x_clear_otgph(void); #else #define pxa27x_clear_otgph() do {} while (0) diff --git a/drivers/usb/host/r8a66597-hcd.c b/drivers/usb/host/r8a66597-hcd.c index 1a2bb4ce638f..77be3c24a427 100644 --- a/drivers/usb/host/r8a66597-hcd.c +++ b/drivers/usb/host/r8a66597-hcd.c @@ -1065,7 +1065,7 @@ static void r8a66597_usb_connect(struct r8a66597 *r8a66597, int port) else if (speed == LSMODE) rh->port |= USB_PORT_STAT_LOW_SPEED; - rh->port &= USB_PORT_STAT_RESET; + rh->port &= ~USB_PORT_STAT_RESET; rh->port |= USB_PORT_STAT_ENABLE; } diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c index fd9e03afd91c..2eb658d26394 100644 --- a/drivers/usb/host/xhci-mem.c +++ b/drivers/usb/host/xhci-mem.c @@ -835,6 +835,27 @@ fail: return 0; } +void xhci_copy_ep0_dequeue_into_input_ctx(struct xhci_hcd *xhci, + struct usb_device *udev) +{ + struct xhci_virt_device *virt_dev; + struct xhci_ep_ctx *ep0_ctx; + struct xhci_ring *ep_ring; + + virt_dev = xhci->devs[udev->slot_id]; + ep0_ctx = xhci_get_ep_ctx(xhci, virt_dev->in_ctx, 0); + ep_ring = virt_dev->eps[0].ring; + /* + * FIXME we don't keep track of the dequeue pointer very well after a + * Set TR dequeue pointer, so we're setting the dequeue pointer of the + * host to our enqueue pointer. This should only be called after a + * configured device has reset, so all control transfers should have + * been completed or cancelled before the reset. + */ + ep0_ctx->deq = xhci_trb_virt_to_dma(ep_ring->enq_seg, ep_ring->enqueue); + ep0_ctx->deq |= ep_ring->cycle_state; +} + /* Setup an xHCI virtual device for a Set Address command */ int xhci_setup_addressable_virt_dev(struct xhci_hcd *xhci, struct usb_device *udev) { @@ -1002,7 +1023,7 @@ static inline unsigned int xhci_get_endpoint_interval(struct usb_device *udev, return EP_INTERVAL(interval); } -/* The "Mult" field in the endpoint context is only set for SuperSpeed devices. +/* The "Mult" field in the endpoint context is only set for SuperSpeed isoc eps. * High speed endpoint descriptors can define "the number of additional * transaction opportunities per microframe", but that goes in the Max Burst * endpoint context field. @@ -1010,7 +1031,8 @@ static inline unsigned int xhci_get_endpoint_interval(struct usb_device *udev, static inline u32 xhci_get_endpoint_mult(struct usb_device *udev, struct usb_host_endpoint *ep) { - if (udev->speed != USB_SPEED_SUPER) + if (udev->speed != USB_SPEED_SUPER || + !usb_endpoint_xfer_isoc(&ep->desc)) return 0; return ep->ss_ep_comp.bmAttributes; } diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index 9012098add6b..bfc99a939455 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -182,8 +182,12 @@ static void inc_deq(struct xhci_hcd *xhci, struct xhci_ring *ring, bool consumer * set, but other sections talk about dealing with the chain bit set. This was * fixed in the 0.96 specification errata, but we have to assume that all 0.95 * xHCI hardware can't handle the chain bit being cleared on a link TRB. + * + * @more_trbs_coming: Will you enqueue more TRBs before calling + * prepare_transfer()? */ -static void inc_enq(struct xhci_hcd *xhci, struct xhci_ring *ring, bool consumer) +static void inc_enq(struct xhci_hcd *xhci, struct xhci_ring *ring, + bool consumer, bool more_trbs_coming) { u32 chain; union xhci_trb *next; @@ -199,15 +203,28 @@ static void inc_enq(struct xhci_hcd *xhci, struct xhci_ring *ring, bool consumer while (last_trb(xhci, ring, ring->enq_seg, next)) { if (!consumer) { if (ring != xhci->event_ring) { - if (chain) { - next->link.control |= TRB_CHAIN; - - /* Give this link TRB to the hardware */ - wmb(); - next->link.control ^= TRB_CYCLE; - } else { + /* + * If the caller doesn't plan on enqueueing more + * TDs before ringing the doorbell, then we + * don't want to give the link TRB to the + * hardware just yet. We'll give the link TRB + * back in prepare_ring() just before we enqueue + * the TD at the top of the ring. + */ + if (!chain && !more_trbs_coming) break; + + /* If we're not dealing with 0.95 hardware, + * carry over the chain bit of the previous TRB + * (which may mean the chain bit is cleared). + */ + if (!xhci_link_trb_quirk(xhci)) { + next->link.control &= ~TRB_CHAIN; + next->link.control |= chain; } + /* Give this link TRB to the hardware */ + wmb(); + next->link.control ^= TRB_CYCLE; } /* Toggle the cycle bit after the last ring segment. */ if (last_trb_on_last_seg(xhci, ring, ring->enq_seg, next)) { @@ -1707,9 +1724,12 @@ void xhci_handle_event(struct xhci_hcd *xhci) /* * Generic function for queueing a TRB on a ring. * The caller must have checked to make sure there's room on the ring. + * + * @more_trbs_coming: Will you enqueue more TRBs before calling + * prepare_transfer()? */ static void queue_trb(struct xhci_hcd *xhci, struct xhci_ring *ring, - bool consumer, + bool consumer, bool more_trbs_coming, u32 field1, u32 field2, u32 field3, u32 field4) { struct xhci_generic_trb *trb; @@ -1719,7 +1739,7 @@ static void queue_trb(struct xhci_hcd *xhci, struct xhci_ring *ring, trb->field[1] = field2; trb->field[2] = field3; trb->field[3] = field4; - inc_enq(xhci, ring, consumer); + inc_enq(xhci, ring, consumer, more_trbs_coming); } /* @@ -1988,6 +2008,7 @@ static int queue_bulk_sg_tx(struct xhci_hcd *xhci, gfp_t mem_flags, int trb_buff_len, this_sg_len, running_total; bool first_trb; u64 addr; + bool more_trbs_coming; struct xhci_generic_trb *start_trb; int start_cycle; @@ -2073,7 +2094,11 @@ static int queue_bulk_sg_tx(struct xhci_hcd *xhci, gfp_t mem_flags, length_field = TRB_LEN(trb_buff_len) | remainder | TRB_INTR_TARGET(0); - queue_trb(xhci, ep_ring, false, + if (num_trbs > 1) + more_trbs_coming = true; + else + more_trbs_coming = false; + queue_trb(xhci, ep_ring, false, more_trbs_coming, lower_32_bits(addr), upper_32_bits(addr), length_field, @@ -2124,6 +2149,7 @@ int xhci_queue_bulk_tx(struct xhci_hcd *xhci, gfp_t mem_flags, int num_trbs; struct xhci_generic_trb *start_trb; bool first_trb; + bool more_trbs_coming; int start_cycle; u32 field, length_field; @@ -2212,7 +2238,11 @@ int xhci_queue_bulk_tx(struct xhci_hcd *xhci, gfp_t mem_flags, length_field = TRB_LEN(trb_buff_len) | remainder | TRB_INTR_TARGET(0); - queue_trb(xhci, ep_ring, false, + if (num_trbs > 1) + more_trbs_coming = true; + else + more_trbs_coming = false; + queue_trb(xhci, ep_ring, false, more_trbs_coming, lower_32_bits(addr), upper_32_bits(addr), length_field, @@ -2291,7 +2321,7 @@ int xhci_queue_ctrl_tx(struct xhci_hcd *xhci, gfp_t mem_flags, /* Queue setup TRB - see section 6.4.1.2.1 */ /* FIXME better way to translate setup_packet into two u32 fields? */ setup = (struct usb_ctrlrequest *) urb->setup_packet; - queue_trb(xhci, ep_ring, false, + queue_trb(xhci, ep_ring, false, true, /* FIXME endianness is probably going to bite my ass here. */ setup->bRequestType | setup->bRequest << 8 | setup->wValue << 16, setup->wIndex | setup->wLength << 16, @@ -2307,7 +2337,7 @@ int xhci_queue_ctrl_tx(struct xhci_hcd *xhci, gfp_t mem_flags, if (urb->transfer_buffer_length > 0) { if (setup->bRequestType & USB_DIR_IN) field |= TRB_DIR_IN; - queue_trb(xhci, ep_ring, false, + queue_trb(xhci, ep_ring, false, true, lower_32_bits(urb->transfer_dma), upper_32_bits(urb->transfer_dma), length_field, @@ -2324,7 +2354,7 @@ int xhci_queue_ctrl_tx(struct xhci_hcd *xhci, gfp_t mem_flags, field = 0; else field = TRB_DIR_IN; - queue_trb(xhci, ep_ring, false, + queue_trb(xhci, ep_ring, false, false, 0, 0, TRB_INTR_TARGET(0), @@ -2350,18 +2380,21 @@ static int queue_command(struct xhci_hcd *xhci, u32 field1, u32 field2, u32 field3, u32 field4, bool command_must_succeed) { int reserved_trbs = xhci->cmd_ring_reserved_trbs; + int ret; + if (!command_must_succeed) reserved_trbs++; - if (!room_on_ring(xhci, xhci->cmd_ring, reserved_trbs)) { - if (!in_interrupt()) - xhci_err(xhci, "ERR: No room for command on command ring\n"); + ret = prepare_ring(xhci, xhci->cmd_ring, EP_STATE_RUNNING, + reserved_trbs, GFP_ATOMIC); + if (ret < 0) { + xhci_err(xhci, "ERR: No room for command on command ring\n"); if (command_must_succeed) xhci_err(xhci, "ERR: Reserved TRB counting for " "unfailable commands failed.\n"); - return -ENOMEM; + return ret; } - queue_trb(xhci, xhci->cmd_ring, false, field1, field2, field3, + queue_trb(xhci, xhci->cmd_ring, false, false, field1, field2, field3, field4 | xhci->cmd_ring->cycle_state); return 0; } diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index 27345cd04da0..3998f72cd0c4 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -2134,6 +2134,8 @@ int xhci_address_device(struct usb_hcd *hcd, struct usb_device *udev) /* If this is a Set Address to an unconfigured device, setup ep 0 */ if (!udev->config) xhci_setup_addressable_virt_dev(xhci, udev); + else + xhci_copy_ep0_dequeue_into_input_ctx(xhci, udev); /* Otherwise, assume the core has the device configured how it wants */ xhci_dbg(xhci, "Slot ID %d Input Context:\n", udev->slot_id); xhci_dbg_ctx(xhci, virt_dev->in_ctx, 2); diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index 8b4b7d39f79c..6c7e3430ec93 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -1292,6 +1292,8 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags); void xhci_free_virt_device(struct xhci_hcd *xhci, int slot_id); int xhci_alloc_virt_device(struct xhci_hcd *xhci, int slot_id, struct usb_device *udev, gfp_t flags); int xhci_setup_addressable_virt_dev(struct xhci_hcd *xhci, struct usb_device *udev); +void xhci_copy_ep0_dequeue_into_input_ctx(struct xhci_hcd *xhci, + struct usb_device *udev); unsigned int xhci_get_endpoint_index(struct usb_endpoint_descriptor *desc); unsigned int xhci_get_endpoint_flag(struct usb_endpoint_descriptor *desc); unsigned int xhci_get_endpoint_flag_from_index(unsigned int ep_index); diff --git a/drivers/usb/misc/sisusbvga/sisusb.c b/drivers/usb/misc/sisusbvga/sisusb.c index 30d930386b65..d25814c172b2 100644 --- a/drivers/usb/misc/sisusbvga/sisusb.c +++ b/drivers/usb/misc/sisusbvga/sisusb.c @@ -2436,7 +2436,8 @@ sisusb_open(struct inode *inode, struct file *file) } if (!sisusb->devinit) { - if (sisusb->sisusb_dev->speed == USB_SPEED_HIGH) { + if (sisusb->sisusb_dev->speed == USB_SPEED_HIGH || + sisusb->sisusb_dev->speed == USB_SPEED_SUPER) { if (sisusb_init_gfxdevice(sisusb, 0)) { mutex_unlock(&sisusb->lock); dev_err(&sisusb->sisusb_dev->dev, "Failed to initialize device\n"); @@ -3166,7 +3167,7 @@ static int sisusb_probe(struct usb_interface *intf, sisusb->present = 1; - if (dev->speed == USB_SPEED_HIGH) { + if (dev->speed == USB_SPEED_HIGH || dev->speed == USB_SPEED_SUPER) { int initscreen = 1; #ifdef INCL_SISUSB_CON if (sisusb_first_vc > 0 && diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c index fad70bc83555..3b795c56221f 100644 --- a/drivers/usb/musb/musb_core.c +++ b/drivers/usb/musb/musb_core.c @@ -219,8 +219,8 @@ static int musb_ulpi_write(struct otg_transceiver *otg, return 0; } #else -#define musb_ulpi_read(a, b) NULL -#define musb_ulpi_write(a, b, c) NULL +#define musb_ulpi_read NULL +#define musb_ulpi_write NULL #endif static struct otg_io_access_ops musb_ulpi_access = { @@ -451,10 +451,6 @@ void musb_hnp_stop(struct musb *musb) * @param power */ -#define STAGE0_MASK (MUSB_INTR_RESUME | MUSB_INTR_SESSREQ \ - | MUSB_INTR_VBUSERROR | MUSB_INTR_CONNECT \ - | MUSB_INTR_RESET) - static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb, u8 devctl, u8 power) { @@ -642,7 +638,7 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb, handled = IRQ_HANDLED; } - +#endif if (int_usb & MUSB_INTR_SUSPEND) { DBG(1, "SUSPEND (%s) devctl %02x power %02x\n", otg_state_string(musb), devctl, power); @@ -705,6 +701,7 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb, } } +#ifdef CONFIG_USB_MUSB_HDRC_HCD if (int_usb & MUSB_INTR_CONNECT) { struct usb_hcd *hcd = musb_to_hcd(musb); void __iomem *mbase = musb->mregs; @@ -1597,7 +1594,7 @@ irqreturn_t musb_interrupt(struct musb *musb) /* the core can interrupt us for multiple reasons; docs have * a generic interrupt flowchart to follow */ - if (musb->int_usb & STAGE0_MASK) + if (musb->int_usb) retval |= musb_stage0_irq(musb, musb->int_usb, devctl, power); diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h index b22d02dea7d3..91d67794e350 100644 --- a/drivers/usb/musb/musb_core.h +++ b/drivers/usb/musb/musb_core.h @@ -470,7 +470,8 @@ struct musb_csr_regs { struct musb_context_registers { -#ifdef CONFIG_PM +#if defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3) || \ + defined(CONFIG_ARCH_OMAP4) u32 otg_sysconfig, otg_forcestandby; #endif u8 power; @@ -484,7 +485,8 @@ struct musb_context_registers { struct musb_csr_regs index_regs[MUSB_C_NUM_EPS]; }; -#ifdef CONFIG_PM +#if defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3) || \ + defined(CONFIG_ARCH_OMAP4) extern void musb_platform_save_context(struct musb *musb, struct musb_context_registers *musb_context); extern void musb_platform_restore_context(struct musb *musb, diff --git a/drivers/usb/musb/musbhsdma.c b/drivers/usb/musb/musbhsdma.c index 1008044a3bbc..dc66e4376d49 100644 --- a/drivers/usb/musb/musbhsdma.c +++ b/drivers/usb/musb/musbhsdma.c @@ -132,18 +132,9 @@ static void configure_channel(struct dma_channel *channel, if (mode) { csr |= 1 << MUSB_HSDMA_MODE1_SHIFT; BUG_ON(len < packet_sz); - - if (packet_sz >= 64) { - csr |= MUSB_HSDMA_BURSTMODE_INCR16 - << MUSB_HSDMA_BURSTMODE_SHIFT; - } else if (packet_sz >= 32) { - csr |= MUSB_HSDMA_BURSTMODE_INCR8 - << MUSB_HSDMA_BURSTMODE_SHIFT; - } else if (packet_sz >= 16) { - csr |= MUSB_HSDMA_BURSTMODE_INCR4 - << MUSB_HSDMA_BURSTMODE_SHIFT; - } } + csr |= MUSB_HSDMA_BURSTMODE_INCR16 + << MUSB_HSDMA_BURSTMODE_SHIFT; csr |= (musb_channel->epnum << MUSB_HSDMA_ENDPOINT_SHIFT) | (1 << MUSB_HSDMA_ENABLE_SHIFT) diff --git a/drivers/usb/musb/tusb6010.c b/drivers/usb/musb/tusb6010.c index 05c077f8f9ac..3c48e77a0aa2 100644 --- a/drivers/usb/musb/tusb6010.c +++ b/drivers/usb/musb/tusb6010.c @@ -29,19 +29,6 @@ static void tusb_source_power(struct musb *musb, int is_on); #define TUSB_REV_MAJOR(reg_val) ((reg_val >> 4) & 0xf) #define TUSB_REV_MINOR(reg_val) (reg_val & 0xf) -#ifdef CONFIG_PM -/* REVISIT: These should be only needed if somebody implements off idle */ -void musb_platform_save_context(struct musb *musb, - struct musb_context_registers *musb_context) -{ -} - -void musb_platform_restore_context(struct musb *musb, - struct musb_context_registers *musb_context) -{ -} -#endif - /* * Checks the revision. We need to use the DMA register as 3.0 does not * have correct versions for TUSB_PRCM_REV or TUSB_INT_CTRL_REV. diff --git a/drivers/usb/otg/ulpi.c b/drivers/usb/otg/ulpi.c index b1b346932946..d331b222ad21 100644 --- a/drivers/usb/otg/ulpi.c +++ b/drivers/usb/otg/ulpi.c @@ -59,12 +59,17 @@ static int ulpi_set_flags(struct otg_transceiver *otg) static int ulpi_init(struct otg_transceiver *otg) { - int i, vid, pid; - - vid = (otg_io_read(otg, ULPI_VENDOR_ID_HIGH) << 8) | - otg_io_read(otg, ULPI_VENDOR_ID_LOW); - pid = (otg_io_read(otg, ULPI_PRODUCT_ID_HIGH) << 8) | - otg_io_read(otg, ULPI_PRODUCT_ID_LOW); + int i, vid, pid, ret; + u32 ulpi_id = 0; + + for (i = 0; i < 4; i++) { + ret = otg_io_read(otg, ULPI_PRODUCT_ID_HIGH - i); + if (ret < 0) + return ret; + ulpi_id = (ulpi_id << 8) | ret; + } + vid = ulpi_id & 0xffff; + pid = ulpi_id >> 16; pr_info("ULPI transceiver vendor/product ID 0x%04x/0x%04x\n", vid, pid); diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 79dd1ae195e5..e298dc4baed7 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -653,7 +653,6 @@ static struct usb_device_id id_table_combined [] = { { USB_DEVICE(EVOLUTION_VID, EVOLUTION_ER1_PID) }, { USB_DEVICE(EVOLUTION_VID, EVO_HYBRID_PID) }, { USB_DEVICE(EVOLUTION_VID, EVO_RCM4_PID) }, - { USB_DEVICE(CONTEC_VID, CONTEC_COM1USBH_PID) }, { USB_DEVICE(FTDI_VID, FTDI_ARTEMIS_PID) }, { USB_DEVICE(FTDI_VID, FTDI_ATIK_ATK16_PID) }, { USB_DEVICE(FTDI_VID, FTDI_ATIK_ATK16C_PID) }, @@ -692,6 +691,7 @@ static struct usb_device_id id_table_combined [] = { { USB_DEVICE(FTDI_VID, FTDI_NDI_AURORA_SCU_PID), .driver_info = (kernel_ulong_t)&ftdi_NDI_device_quirk }, { USB_DEVICE(TELLDUS_VID, TELLDUS_TELLSTICK_PID) }, + { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_SERIAL_VX7_PID) }, { USB_DEVICE(FTDI_VID, FTDI_MAXSTREAM_PID) }, { USB_DEVICE(FTDI_VID, FTDI_PHI_FISCO_PID) }, { USB_DEVICE(TML_VID, TML_USB_SERIAL_PID) }, @@ -738,6 +738,14 @@ static struct usb_device_id id_table_combined [] = { { USB_DEVICE(FTDI_VID, MJSG_SR_RADIO_PID) }, { USB_DEVICE(FTDI_VID, MJSG_HD_RADIO_PID) }, { USB_DEVICE(FTDI_VID, MJSG_XM_RADIO_PID) }, + { USB_DEVICE(FTDI_VID, XVERVE_SIGNALYZER_ST_PID), + .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, + { USB_DEVICE(FTDI_VID, XVERVE_SIGNALYZER_SLITE_PID), + .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, + { USB_DEVICE(FTDI_VID, XVERVE_SIGNALYZER_SH2_PID), + .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, + { USB_DEVICE(FTDI_VID, XVERVE_SIGNALYZER_SH4_PID), + .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, { }, /* Optional parameter entry */ { } /* Terminating entry */ }; diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h index 94d86c3febcb..d01946db8fac 100644 --- a/drivers/usb/serial/ftdi_sio_ids.h +++ b/drivers/usb/serial/ftdi_sio_ids.h @@ -501,13 +501,6 @@ #define CONTEC_COM1USBH_PID 0x8311 /* COM-1(USB)H */ /* - * Contec products (http://www.contec.com) - * Submitted by Daniel Sangorrin - */ -#define CONTEC_VID 0x06CE /* Vendor ID */ -#define CONTEC_COM1USBH_PID 0x8311 /* COM-1(USB)H */ - -/* * Definitions for B&B Electronics products. */ #define BANDB_VID 0x0856 /* B&B Electronics Vendor ID */ @@ -703,6 +696,12 @@ #define TELLDUS_TELLSTICK_PID 0x0C30 /* RF control dongle 433 MHz using FT232RL */ /* + * RT Systems programming cables for various ham radios + */ +#define RTSYSTEMS_VID 0x2100 /* Vendor ID */ +#define RTSYSTEMS_SERIAL_VX7_PID 0x9e52 /* Serial converter for VX-7 Radios using FT232RL */ + +/* * Bayer Ascensia Contour blood glucose meter USB-converter cable. * http://winglucofacts.com/cables/ */ @@ -1024,3 +1023,12 @@ #define MJSG_SR_RADIO_PID 0x9379 #define MJSG_XM_RADIO_PID 0x937A #define MJSG_HD_RADIO_PID 0x937C + +/* + * Xverve Signalyzer tools (http://www.signalyzer.com/) + */ +#define XVERVE_SIGNALYZER_ST_PID 0xBCA0 +#define XVERVE_SIGNALYZER_SLITE_PID 0xBCA1 +#define XVERVE_SIGNALYZER_SH2_PID 0xBCA2 +#define XVERVE_SIGNALYZER_SH4_PID 0xBCA4 + diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index e280ad8e12f7..5cd30e4345c6 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -206,6 +206,7 @@ static void option_instat_callback(struct urb *urb); #define AMOI_PRODUCT_H01 0x0800 #define AMOI_PRODUCT_H01A 0x7002 #define AMOI_PRODUCT_H02 0x0802 +#define AMOI_PRODUCT_SKYPEPHONE_S2 0x0407 #define DELL_VENDOR_ID 0x413C @@ -302,6 +303,7 @@ static void option_instat_callback(struct urb *urb); #define QISDA_PRODUCT_H21_4512 0x4512 #define QISDA_PRODUCT_H21_4523 0x4523 #define QISDA_PRODUCT_H20_4515 0x4515 +#define QISDA_PRODUCT_H20_4518 0x4518 #define QISDA_PRODUCT_H20_4519 0x4519 /* TLAYTECH PRODUCTS */ @@ -516,6 +518,7 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE(AMOI_VENDOR_ID, AMOI_PRODUCT_H01) }, { USB_DEVICE(AMOI_VENDOR_ID, AMOI_PRODUCT_H01A) }, { USB_DEVICE(AMOI_VENDOR_ID, AMOI_PRODUCT_H02) }, + { USB_DEVICE(AMOI_VENDOR_ID, AMOI_PRODUCT_SKYPEPHONE_S2) }, { USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5700_MINICARD) }, /* Dell Wireless 5700 Mobile Broadband CDMA/EVDO Mini-Card == Novatel Expedite EV620 CDMA/EV-DO */ { USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5500_MINICARD) }, /* Dell Wireless 5500 Mobile Broadband HSDPA Mini-Card == Novatel Expedite EU740 HSDPA/3G */ @@ -852,6 +855,7 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE(QISDA_VENDOR_ID, QISDA_PRODUCT_H21_4512) }, { USB_DEVICE(QISDA_VENDOR_ID, QISDA_PRODUCT_H21_4523) }, { USB_DEVICE(QISDA_VENDOR_ID, QISDA_PRODUCT_H20_4515) }, + { USB_DEVICE(QISDA_VENDOR_ID, QISDA_PRODUCT_H20_4518) }, { USB_DEVICE(QISDA_VENDOR_ID, QISDA_PRODUCT_H20_4519) }, { USB_DEVICE(TOSHIBA_VENDOR_ID, TOSHIBA_PRODUCT_G450) }, { USB_DEVICE(TOSHIBA_VENDOR_ID, TOSHIBA_PRODUCT_HSDPA_MINICARD ) }, /* Toshiba 3G HSDPA == Novatel Expedite EU870D MiniCard */ diff --git a/drivers/usb/serial/qcserial.c b/drivers/usb/serial/qcserial.c index 04bb759536bb..cde67cacb2c3 100644 --- a/drivers/usb/serial/qcserial.c +++ b/drivers/usb/serial/qcserial.c @@ -51,6 +51,8 @@ static const struct usb_device_id id_table[] = { {USB_DEVICE(0x1f45, 0x0001)}, /* Unknown Gobi QDL device */ {USB_DEVICE(0x413c, 0x8185)}, /* Dell Gobi 2000 QDL device (N0218, VU936) */ {USB_DEVICE(0x413c, 0x8186)}, /* Dell Gobi 2000 Modem device (N0218, VU936) */ + {USB_DEVICE(0x05c6, 0x9208)}, /* Generic Gobi 2000 QDL device */ + {USB_DEVICE(0x05c6, 0x920b)}, /* Generic Gobi 2000 Modem device */ {USB_DEVICE(0x05c6, 0x9224)}, /* Sony Gobi 2000 QDL device (N0279, VU730) */ {USB_DEVICE(0x05c6, 0x9225)}, /* Sony Gobi 2000 Modem device (N0279, VU730) */ {USB_DEVICE(0x05c6, 0x9244)}, /* Samsung Gobi 2000 QDL device (VL176) */ @@ -139,6 +141,7 @@ static int qcprobe(struct usb_serial *serial, const struct usb_device_id *id) "Could not set interface, error %d\n", retval); retval = -ENODEV; + kfree(data); } return retval; } @@ -155,6 +158,7 @@ static int qcprobe(struct usb_serial *serial, const struct usb_device_id *id) "Could not set interface, error %d\n", retval); retval = -ENODEV; + kfree(data); } return retval; } @@ -163,6 +167,7 @@ static int qcprobe(struct usb_serial *serial, const struct usb_device_id *id) default: dev_err(&serial->dev->dev, "unknown number of interfaces: %d\n", nintf); + kfree(data); return -ENODEV; } diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c index ef0bdb08d788..d47b56e9e8ce 100644 --- a/drivers/usb/serial/sierra.c +++ b/drivers/usb/serial/sierra.c @@ -245,6 +245,7 @@ static const struct usb_device_id id_table[] = { { USB_DEVICE(0x1199, 0x0021) }, /* Sierra Wireless AirCard 597E */ { USB_DEVICE(0x1199, 0x0112) }, /* Sierra Wireless AirCard 580 */ { USB_DEVICE(0x1199, 0x0120) }, /* Sierra Wireless USB Dongle 595U */ + { USB_DEVICE(0x1199, 0x0301) }, /* Sierra Wireless USB Dongle 250U */ /* Sierra Wireless C597 */ { USB_DEVICE_AND_INTERFACE_INFO(0x1199, 0x0023, 0xFF, 0xFF, 0xFF) }, /* Sierra Wireless T598 */ diff --git a/drivers/usb/storage/transport.c b/drivers/usb/storage/transport.c index 44716427c51c..64ec073e89de 100644 --- a/drivers/usb/storage/transport.c +++ b/drivers/usb/storage/transport.c @@ -139,9 +139,7 @@ static int usb_stor_msg_common(struct us_data *us, int timeout) /* fill the common fields in the URB */ us->current_urb->context = &urb_done; - us->current_urb->actual_length = 0; - us->current_urb->error_count = 0; - us->current_urb->status = 0; + us->current_urb->transfer_flags = 0; /* we assume that if transfer_buffer isn't us->iobuf then it * hasn't been mapped for DMA. Yes, this is clunky, but it's |