summaryrefslogtreecommitdiff
path: root/drivers/usb
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb')
-rw-r--r--drivers/usb/host/r8a66597-hcd.c110
-rw-r--r--drivers/usb/host/r8a66597.h87
2 files changed, 96 insertions, 101 deletions
diff --git a/drivers/usb/host/r8a66597-hcd.c b/drivers/usb/host/r8a66597-hcd.c
index a7a7070c6e2a..d60f1985320c 100644
--- a/drivers/usb/host/r8a66597-hcd.c
+++ b/drivers/usb/host/r8a66597-hcd.c
@@ -35,10 +35,8 @@
#include <linux/interrupt.h>
#include <linux/usb.h>
#include <linux/platform_device.h>
-
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/system.h>
+#include <linux/io.h>
+#include <linux/irq.h>
#include "../core/hcd.h"
#include "r8a66597.h"
@@ -54,16 +52,21 @@ static const char hcd_name[] = "r8a66597_hcd";
/* module parameters */
static unsigned short clock = XTAL12;
module_param(clock, ushort, 0644);
-MODULE_PARM_DESC(clock, "input clock: 48MHz=32768, 24MHz=16384, 12MHz=0(default=0)");
+MODULE_PARM_DESC(clock, "input clock: 48MHz=32768, 24MHz=16384, 12MHz=0 "
+ "(default=0)");
+
static unsigned short vif = LDRV;
module_param(vif, ushort, 0644);
MODULE_PARM_DESC(vif, "input VIF: 3.3V=32768, 1.5V=0(default=32768)");
-static unsigned short endian = 0;
+
+static unsigned short endian;
module_param(endian, ushort, 0644);
-MODULE_PARM_DESC(endian, "data endian: big=256, little=0(default=0)");
+MODULE_PARM_DESC(endian, "data endian: big=256, little=0 (default=0)");
+
static unsigned short irq_sense = INTL;
module_param(irq_sense, ushort, 0644);
-MODULE_PARM_DESC(irq_sense, "IRQ sense: low level=32, falling edge=0(default=32)");
+MODULE_PARM_DESC(irq_sense, "IRQ sense: low level=32, falling edge=0 "
+ "(default=32)");
static void packet_write(struct r8a66597 *r8a66597, u16 pipenum);
static int r8a66597_get_frame(struct usb_hcd *hcd);
@@ -308,7 +311,7 @@ static int make_r8a66597_device(struct r8a66597 *r8a66597,
struct r8a66597_device *dev;
int usb_address = urb->setup_packet[2]; /* urb->pipe is address 0 */
- dev = kzalloc(sizeof(struct r8a66597_device), GFP_KERNEL);
+ dev = kzalloc(sizeof(struct r8a66597_device), GFP_ATOMIC);
if (dev == NULL)
return -ENOMEM;
@@ -611,33 +614,33 @@ static u16 get_empty_pipenum(struct r8a66597 *r8a66597,
u16 array[R8A66597_MAX_NUM_PIPE], i = 0, min;
memset(array, 0, sizeof(array));
- switch(ep->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) {
- case USB_ENDPOINT_XFER_BULK:
+ switch (ep->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) {
+ case USB_ENDPOINT_XFER_BULK:
if (ep->bEndpointAddress & USB_ENDPOINT_DIR_MASK)
array[i++] = 4;
else {
array[i++] = 3;
array[i++] = 5;
}
- break;
- case USB_ENDPOINT_XFER_INT:
+ break;
+ case USB_ENDPOINT_XFER_INT:
if (ep->bEndpointAddress & USB_ENDPOINT_DIR_MASK) {
array[i++] = 6;
array[i++] = 7;
array[i++] = 8;
} else
array[i++] = 9;
- break;
- case USB_ENDPOINT_XFER_ISOC:
+ break;
+ case USB_ENDPOINT_XFER_ISOC:
if (ep->bEndpointAddress & USB_ENDPOINT_DIR_MASK)
array[i++] = 2;
else
array[i++] = 1;
- break;
- default:
- err("Illegal type");
- return 0;
- }
+ break;
+ default:
+ err("Illegal type");
+ return 0;
+ }
i = 1;
min = array[0];
@@ -654,7 +657,7 @@ static u16 get_r8a66597_type(__u8 type)
{
u16 r8a66597_type;
- switch(type) {
+ switch (type) {
case USB_ENDPOINT_XFER_BULK:
r8a66597_type = R8A66597_BULK;
break;
@@ -874,7 +877,7 @@ static void r8a66597_usb_preconnect(struct r8a66597 *r8a66597, int port)
{
r8a66597->root_hub[port].port |= (1 << USB_PORT_FEAT_CONNECTION)
| (1 << USB_PORT_FEAT_C_CONNECTION);
- r8a66597_write(r8a66597, (u16)~DTCH, get_intsts_reg(port));
+ r8a66597_write(r8a66597, ~DTCH, get_intsts_reg(port));
r8a66597_bset(r8a66597, DTCHE, get_intenb_reg(port));
}
@@ -917,7 +920,7 @@ static void prepare_setup_packet(struct r8a66597 *r8a66597,
r8a66597_write(r8a66597, make_devsel(td->address) | td->maxpacket,
DCPMAXP);
- r8a66597_write(r8a66597, (u16)~(SIGN | SACK), INTSTS1);
+ r8a66597_write(r8a66597, ~(SIGN | SACK), INTSTS1);
for (i = 0; i < 4; i++) {
r8a66597_write(r8a66597, p[i], setup_addr);
@@ -948,19 +951,18 @@ static void prepare_packet_read(struct r8a66597 *r8a66597,
pipe_irq_disable(r8a66597, td->pipenum);
pipe_setting(r8a66597, td);
pipe_stop(r8a66597, td->pipe);
- r8a66597_write(r8a66597, (u16)~(1 << td->pipenum),
- BRDYSTS);
+ r8a66597_write(r8a66597, ~(1 << td->pipenum), BRDYSTS);
if (td->pipe->pipetre) {
r8a66597_write(r8a66597, TRCLR,
- td->pipe->pipetre);
+ td->pipe->pipetre);
r8a66597_write(r8a66597,
- (urb->transfer_buffer_length
- + td->maxpacket - 1)
- / td->maxpacket,
- td->pipe->pipetrn);
+ (urb->transfer_buffer_length
+ + td->maxpacket - 1)
+ / td->maxpacket,
+ td->pipe->pipetrn);
r8a66597_bset(r8a66597, TRENB,
- td->pipe->pipetre);
+ td->pipe->pipetre);
}
pipe_start(r8a66597, td->pipe);
@@ -991,7 +993,7 @@ static void prepare_packet_write(struct r8a66597 *r8a66597,
if (td->pipe->pipetre)
r8a66597_bclr(r8a66597, TRENB, td->pipe->pipetre);
}
- r8a66597_write(r8a66597, (u16)~(1 << td->pipenum), BRDYSTS);
+ r8a66597_write(r8a66597, ~(1 << td->pipenum), BRDYSTS);
fifo_change_from_pipe(r8a66597, td->pipe);
tmp = r8a66597_read(r8a66597, td->pipe->fifoctr);
@@ -1009,21 +1011,21 @@ static void prepare_status_packet(struct r8a66597 *r8a66597,
struct urb *urb = td->urb;
r8a66597_pipe_toggle(r8a66597, td->pipe, 1);
+ pipe_stop(r8a66597, td->pipe);
if (urb->setup_packet[0] & USB_ENDPOINT_DIR_MASK) {
r8a66597_bset(r8a66597, R8A66597_DIR, DCPCFG);
r8a66597_mdfy(r8a66597, ISEL, ISEL | CURPIPE, CFIFOSEL);
r8a66597_reg_wait(r8a66597, CFIFOSEL, CURPIPE, 0);
- r8a66597_write(r8a66597, BVAL | BCLR, CFIFOCTR);
- r8a66597_write(r8a66597, (u16)~BEMP0, BEMPSTS);
+ r8a66597_write(r8a66597, ~BEMP0, BEMPSTS);
+ r8a66597_write(r8a66597, BCLR, CFIFOCTR);
+ r8a66597_write(r8a66597, BVAL, CFIFOCTR);
enable_irq_empty(r8a66597, 0);
} else {
r8a66597_bclr(r8a66597, R8A66597_DIR, DCPCFG);
r8a66597_mdfy(r8a66597, 0, ISEL | CURPIPE, CFIFOSEL);
r8a66597_reg_wait(r8a66597, CFIFOSEL, CURPIPE, 0);
r8a66597_write(r8a66597, BCLR, CFIFOCTR);
- r8a66597_write(r8a66597, (u16)~BRDY0, BRDYSTS);
- r8a66597_write(r8a66597, (u16)~BEMP0, BEMPSTS);
enable_irq_ready(r8a66597, 0);
}
enable_irq_nrdy(r8a66597, 0);
@@ -1269,7 +1271,7 @@ static void packet_write(struct r8a66597 *r8a66597, u16 pipenum)
/* write fifo */
if (pipenum > 0)
- r8a66597_write(r8a66597, (u16)~(1 << pipenum), BEMPSTS);
+ r8a66597_write(r8a66597, ~(1 << pipenum), BEMPSTS);
if (urb->transfer_buffer) {
r8a66597_write_fifo(r8a66597, td->pipe->fifoaddr, buf, size);
if (!usb_pipebulk(urb->pipe) || td->maxpacket != size)
@@ -1362,7 +1364,7 @@ static void irq_pipe_ready(struct r8a66597 *r8a66597)
mask = r8a66597_read(r8a66597, BRDYSTS)
& r8a66597_read(r8a66597, BRDYENB);
- r8a66597_write(r8a66597, (u16)~mask, BRDYSTS);
+ r8a66597_write(r8a66597, ~mask, BRDYSTS);
if (mask & BRDY0) {
td = r8a66597_get_td(r8a66597, 0);
if (td && td->type == USB_PID_IN)
@@ -1397,7 +1399,7 @@ static void irq_pipe_empty(struct r8a66597 *r8a66597)
mask = r8a66597_read(r8a66597, BEMPSTS)
& r8a66597_read(r8a66597, BEMPENB);
- r8a66597_write(r8a66597, (u16)~mask, BEMPSTS);
+ r8a66597_write(r8a66597, ~mask, BEMPSTS);
if (mask & BEMP0) {
cfifo_change(r8a66597, 0);
td = r8a66597_get_td(r8a66597, 0);
@@ -1434,7 +1436,7 @@ static void irq_pipe_nrdy(struct r8a66597 *r8a66597)
mask = r8a66597_read(r8a66597, NRDYSTS)
& r8a66597_read(r8a66597, NRDYENB);
- r8a66597_write(r8a66597, (u16)~mask, NRDYSTS);
+ r8a66597_write(r8a66597, ~mask, NRDYSTS);
if (mask & NRDY0) {
cfifo_change(r8a66597, 0);
set_urb_error(r8a66597, 0);
@@ -1488,14 +1490,14 @@ static irqreturn_t r8a66597_irq(struct usb_hcd *hcd)
mask0 = intsts0 & intenb0 & (BEMP | NRDY | BRDY);
if (mask2) {
if (mask2 & ATTCH) {
- r8a66597_write(r8a66597, (u16)~ATTCH, INTSTS2);
+ r8a66597_write(r8a66597, ~ATTCH, INTSTS2);
r8a66597_bclr(r8a66597, ATTCHE, INTENB2);
/* start usb bus sampling */
start_root_hub_sampling(r8a66597, 1);
}
if (mask2 & DTCH) {
- r8a66597_write(r8a66597, (u16)~DTCH, INTSTS2);
+ r8a66597_write(r8a66597, ~DTCH, INTSTS2);
r8a66597_bclr(r8a66597, DTCHE, INTENB2);
r8a66597_usb_disconnect(r8a66597, 1);
}
@@ -1503,24 +1505,24 @@ static irqreturn_t r8a66597_irq(struct usb_hcd *hcd)
if (mask1) {
if (mask1 & ATTCH) {
- r8a66597_write(r8a66597, (u16)~ATTCH, INTSTS1);
+ r8a66597_write(r8a66597, ~ATTCH, INTSTS1);
r8a66597_bclr(r8a66597, ATTCHE, INTENB1);
/* start usb bus sampling */
start_root_hub_sampling(r8a66597, 0);
}
if (mask1 & DTCH) {
- r8a66597_write(r8a66597, (u16)~DTCH, INTSTS1);
+ r8a66597_write(r8a66597, ~DTCH, INTSTS1);
r8a66597_bclr(r8a66597, DTCHE, INTENB1);
r8a66597_usb_disconnect(r8a66597, 0);
}
if (mask1 & SIGN) {
- r8a66597_write(r8a66597, (u16)~SIGN, INTSTS1);
+ r8a66597_write(r8a66597, ~SIGN, INTSTS1);
set_urb_error(r8a66597, 0);
check_next_phase(r8a66597);
}
if (mask1 & SACK) {
- r8a66597_write(r8a66597, (u16)~SACK, INTSTS1);
+ r8a66597_write(r8a66597, ~SACK, INTSTS1);
check_next_phase(r8a66597);
}
}
@@ -1663,13 +1665,9 @@ static int check_pipe_config(struct r8a66597 *r8a66597, struct urb *urb)
static int r8a66597_start(struct usb_hcd *hcd)
{
struct r8a66597 *r8a66597 = hcd_to_r8a66597(hcd);
- int ret;
hcd->state = HC_STATE_RUNNING;
- if ((ret = enable_controller(r8a66597)) < 0)
- return ret;
-
- return 0;
+ return enable_controller(r8a66597);
}
static void r8a66597_stop(struct usb_hcd *hcd)
@@ -1696,13 +1694,12 @@ static void set_address_zero(struct r8a66597 *r8a66597, struct urb *urb)
static struct r8a66597_td *r8a66597_make_td(struct r8a66597 *r8a66597,
struct urb *urb,
- struct usb_host_endpoint *hep,
- gfp_t mem_flags)
+ struct usb_host_endpoint *hep)
{
struct r8a66597_td *td;
u16 pipenum;
- td = kzalloc(sizeof(struct r8a66597_td), mem_flags);
+ td = kzalloc(sizeof(struct r8a66597_td), GFP_ATOMIC);
if (td == NULL)
return NULL;
@@ -1741,7 +1738,8 @@ static int r8a66597_urb_enqueue(struct usb_hcd *hcd,
}
if (!hep->hcpriv) {
- hep->hcpriv = kzalloc(sizeof(struct r8a66597_pipe), mem_flags);
+ hep->hcpriv = kzalloc(sizeof(struct r8a66597_pipe),
+ GFP_ATOMIC);
if (!hep->hcpriv) {
ret = -ENOMEM;
goto error;
@@ -1755,7 +1753,7 @@ static int r8a66597_urb_enqueue(struct usb_hcd *hcd,
init_pipe_config(r8a66597, urb);
set_address_zero(r8a66597, urb);
- td = r8a66597_make_td(r8a66597, urb, hep, mem_flags);
+ td = r8a66597_make_td(r8a66597, urb, hep);
if (td == NULL) {
ret = -ENOMEM;
goto error;
diff --git a/drivers/usb/host/r8a66597.h b/drivers/usb/host/r8a66597.h
index 97c2a71ac7a1..fe9ceb077d9b 100644
--- a/drivers/usb/host/r8a66597.h
+++ b/drivers/usb/host/r8a66597.h
@@ -203,14 +203,14 @@
#define DTLN 0x0FFF /* b11-0: FIFO received data length */
/* Interrupt Enable Register 0 */
-#define VBSE 0x8000 /* b15: VBUS interrupt */
-#define RSME 0x4000 /* b14: Resume interrupt */
-#define SOFE 0x2000 /* b13: Frame update interrupt */
-#define DVSE 0x1000 /* b12: Device state transition interrupt */
-#define CTRE 0x0800 /* b11: Control transfer stage transition interrupt */
-#define BEMPE 0x0400 /* b10: Buffer empty interrupt */
-#define NRDYE 0x0200 /* b9: Buffer not ready interrupt */
-#define BRDYE 0x0100 /* b8: Buffer ready interrupt */
+#define VBSE 0x8000 /* b15: VBUS interrupt */
+#define RSME 0x4000 /* b14: Resume interrupt */
+#define SOFE 0x2000 /* b13: Frame update interrupt */
+#define DVSE 0x1000 /* b12: Device state transition interrupt */
+#define CTRE 0x0800 /* b11: Control transfer stage transition interrupt */
+#define BEMPE 0x0400 /* b10: Buffer empty interrupt */
+#define NRDYE 0x0200 /* b9: Buffer not ready interrupt */
+#define BRDYE 0x0100 /* b8: Buffer ready interrupt */
/* Interrupt Enable Register 1 */
#define OVRCRE 0x8000 /* b15: Over-current interrupt */
@@ -268,16 +268,16 @@
#define SOF_DISABLE 0x0000 /* SOF OUT Disable */
/* Interrupt Status Register 0 */
-#define VBINT 0x8000 /* b15: VBUS interrupt */
-#define RESM 0x4000 /* b14: Resume interrupt */
-#define SOFR 0x2000 /* b13: SOF frame update interrupt */
-#define DVST 0x1000 /* b12: Device state transition interrupt */
-#define CTRT 0x0800 /* b11: Control transfer stage transition interrupt */
-#define BEMP 0x0400 /* b10: Buffer empty interrupt */
-#define NRDY 0x0200 /* b9: Buffer not ready interrupt */
-#define BRDY 0x0100 /* b8: Buffer ready interrupt */
-#define VBSTS 0x0080 /* b7: VBUS input port */
-#define DVSQ 0x0070 /* b6-4: Device state */
+#define VBINT 0x8000 /* b15: VBUS interrupt */
+#define RESM 0x4000 /* b14: Resume interrupt */
+#define SOFR 0x2000 /* b13: SOF frame update interrupt */
+#define DVST 0x1000 /* b12: Device state transition interrupt */
+#define CTRT 0x0800 /* b11: Control transfer stage transition interrupt */
+#define BEMP 0x0400 /* b10: Buffer empty interrupt */
+#define NRDY 0x0200 /* b9: Buffer not ready interrupt */
+#define BRDY 0x0100 /* b8: Buffer ready interrupt */
+#define VBSTS 0x0080 /* b7: VBUS input port */
+#define DVSQ 0x0070 /* b6-4: Device state */
#define DS_SPD_CNFG 0x0070 /* Suspend Configured */
#define DS_SPD_ADDR 0x0060 /* Suspend Address */
#define DS_SPD_DFLT 0x0050 /* Suspend Default */
@@ -315,13 +315,10 @@
/* Micro Frame Number Register */
#define UFRNM 0x0007 /* b2-0: Micro frame number */
-/* USB Address / Low Power Status Recovery Register */
-//#define USBADDR 0x007F /* b6-0: USB address */
-
/* Default Control Pipe Maxpacket Size Register */
/* Pipe Maxpacket Size Register */
-#define DEVSEL 0xF000 /* b15-14: Device address select */
-#define MAXP 0x007F /* b6-0: Maxpacket size of default control pipe */
+#define DEVSEL 0xF000 /* b15-14: Device address select */
+#define MAXP 0x007F /* b6-0: Maxpacket size of default control pipe */
/* Default Control Pipe Control Register */
#define BSTS 0x8000 /* b15: Buffer status */
@@ -366,21 +363,21 @@
#define MXPS 0x07FF /* b10-0: Maxpacket size */
/* Pipe Cycle Configuration Register */
-#define IFIS 0x1000 /* b12: Isochronous in-buffer flush mode select */
-#define IITV 0x0007 /* b2-0: Isochronous interval */
+#define IFIS 0x1000 /* b12: Isochronous in-buffer flush mode select */
+#define IITV 0x0007 /* b2-0: Isochronous interval */
/* Pipex Control Register */
-#define BSTS 0x8000 /* b15: Buffer status */
-#define INBUFM 0x4000 /* b14: IN buffer monitor (Only for PIPE1 to 5) */
-#define CSCLR 0x2000 /* b13: complete-split status clear */
-#define CSSTS 0x1000 /* b12: complete-split status */
-#define ATREPM 0x0400 /* b10: Auto repeat mode */
-#define ACLRM 0x0200 /* b9: Out buffer auto clear mode */
-#define SQCLR 0x0100 /* b8: Sequence toggle bit clear */
-#define SQSET 0x0080 /* b7: Sequence toggle bit set */
-#define SQMON 0x0040 /* b6: Sequence toggle bit monitor */
-#define PBUSY 0x0020 /* b5: pipe busy */
-#define PID 0x0003 /* b1-0: Response PID */
+#define BSTS 0x8000 /* b15: Buffer status */
+#define INBUFM 0x4000 /* b14: IN buffer monitor (Only for PIPE1 to 5) */
+#define CSCLR 0x2000 /* b13: complete-split status clear */
+#define CSSTS 0x1000 /* b12: complete-split status */
+#define ATREPM 0x0400 /* b10: Auto repeat mode */
+#define ACLRM 0x0200 /* b9: Out buffer auto clear mode */
+#define SQCLR 0x0100 /* b8: Sequence toggle bit clear */
+#define SQSET 0x0080 /* b7: Sequence toggle bit set */
+#define SQMON 0x0040 /* b6: Sequence toggle bit monitor */
+#define PBUSY 0x0020 /* b5: pipe busy */
+#define PID 0x0003 /* b1-0: Response PID */
/* PIPExTRE */
#define TRENB 0x0200 /* b9: Transaction counter enable */
@@ -407,15 +404,15 @@
#define make_devsel(addr) (addr << 12)
struct r8a66597_pipe_info {
- u16 pipenum;
- u16 address; /* R8A66597 HCD usb addres */
- u16 epnum;
- u16 maxpacket;
- u16 type;
- u16 bufnum;
- u16 buf_bsize;
- u16 interval;
- u16 dir_in;
+ u16 pipenum;
+ u16 address; /* R8A66597 HCD usb addres */
+ u16 epnum;
+ u16 maxpacket;
+ u16 type;
+ u16 bufnum;
+ u16 buf_bsize;
+ u16 interval;
+ u16 dir_in;
};
struct r8a66597_pipe {
generated by cgit v1.2.3 (git 2.0.4) at 2024-11-18 03:12:33 +0000