diff options
Diffstat (limited to 'drivers/usb')
| -rw-r--r-- | drivers/usb/serial/aircable.c | 4 | ||||
| -rw-r--r-- | drivers/usb/serial/io_edgeport.c | 4 |
2 files changed, 4 insertions, 4 deletions
diff --git a/drivers/usb/serial/aircable.c b/drivers/usb/serial/aircable.c index b675735bfbee..fbc8c27d5d99 100644 --- a/drivers/usb/serial/aircable.c +++ b/drivers/usb/serial/aircable.c @@ -9,7 +9,7 @@ * The device works as an standard CDC device, it has 2 interfaces, the first * one is for firmware access and the second is the serial one. * The protocol is very simply, there are two posibilities reading or writing. - * When writting the first urb must have a Header that starts with 0x20 0x29 the + * When writing the first urb must have a Header that starts with 0x20 0x29 the * next two bytes must say how much data will be sended. * When reading the process is almost equal except that the header starts with * 0x00 0x20. @@ -18,7 +18,7 @@ * buffer: The First and Second byte is used for a Header, the Third and Fourth * tells the device the amount of information the package holds. * Packages are 60 bytes long Header Stuff. - * When writting to the device the first two bytes of the header are 0x20 0x29 + * When writing to the device the first two bytes of the header are 0x20 0x29 * When reading the bytes are 0x00 0x20, or 0x00 0x10, there is an strange * situation, when too much data arrives to the device because it sends the data * but with out the header. I will use a simply hack to override this situation, diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c index 18f74ac76565..4807f960150b 100644 --- a/drivers/usb/serial/io_edgeport.c +++ b/drivers/usb/serial/io_edgeport.c @@ -2465,7 +2465,7 @@ static int send_cmd_write_uart_register (struct edgeport_port *edge_port, __u8 r ((edge_serial->is_epic) && (!edge_serial->epic_descriptor.Supports.IOSPWriteMCR) && (regNum == MCR))) { - dbg("SendCmdWriteUartReg - Not writting to MCR Register"); + dbg("SendCmdWriteUartReg - Not writing to MCR Register"); return 0; } @@ -2473,7 +2473,7 @@ static int send_cmd_write_uart_register (struct edgeport_port *edge_port, __u8 r ((edge_serial->is_epic) && (!edge_serial->epic_descriptor.Supports.IOSPWriteLCR) && (regNum == LCR))) { - dbg ("SendCmdWriteUartReg - Not writting to LCR Register"); + dbg ("SendCmdWriteUartReg - Not writing to LCR Register"); return 0; } |