summaryrefslogtreecommitdiff
path: root/drivers/usb
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb')
-rw-r--r--drivers/usb/host/xhci-hub.c24
-rw-r--r--drivers/usb/host/xhci-pci.c6
-rw-r--r--drivers/usb/host/xhci-ring.c10
-rw-r--r--drivers/usb/host/xhci.c13
4 files changed, 30 insertions, 23 deletions
diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c
index 483b5f8cb951..a4d429ce02a2 100644
--- a/drivers/usb/host/xhci-hub.c
+++ b/drivers/usb/host/xhci-hub.c
@@ -262,7 +262,7 @@ static void xhci_hub_descriptor(struct usb_hcd *hcd, struct xhci_hcd *xhci,
struct usb_hub_descriptor *desc)
{
- if (hcd->speed == HCD_USB3)
+ if (hcd->speed >= HCD_USB3)
xhci_usb3_hub_descriptor(hcd, xhci, desc);
else
xhci_usb2_hub_descriptor(hcd, xhci, desc);
@@ -351,7 +351,7 @@ int xhci_find_slot_id_by_port(struct usb_hcd *hcd, struct xhci_hcd *xhci,
if (!xhci->devs[i])
continue;
speed = xhci->devs[i]->udev->speed;
- if (((speed == USB_SPEED_SUPER) == (hcd->speed == HCD_USB3))
+ if (((speed >= USB_SPEED_SUPER) == (hcd->speed >= HCD_USB3))
&& xhci->devs[i]->fake_port == port) {
slot_id = i;
break;
@@ -440,7 +440,7 @@ static void xhci_disable_port(struct usb_hcd *hcd, struct xhci_hcd *xhci,
u16 wIndex, __le32 __iomem *addr, u32 port_status)
{
/* Don't allow the USB core to disable SuperSpeed ports. */
- if (hcd->speed == HCD_USB3) {
+ if (hcd->speed >= HCD_USB3) {
xhci_dbg(xhci, "Ignoring request to disable "
"SuperSpeed port.\n");
return;
@@ -508,7 +508,7 @@ static int xhci_get_ports(struct usb_hcd *hcd, __le32 __iomem ***port_array)
int max_ports;
struct xhci_hcd *xhci = hcd_to_xhci(hcd);
- if (hcd->speed == HCD_USB3) {
+ if (hcd->speed >= HCD_USB3) {
max_ports = xhci->num_usb3_ports;
*port_array = xhci->usb3_ports;
} else {
@@ -691,7 +691,7 @@ static u32 xhci_get_port_status(struct usb_hcd *hcd,
if ((raw_port_status & PORT_RC))
status |= USB_PORT_STAT_C_RESET << 16;
/* USB3.0 only */
- if (hcd->speed == HCD_USB3) {
+ if (hcd->speed >= HCD_USB3) {
/* Port link change with port in resume state should not be
* reported to usbcore, as this is an internal state to be
* handled by xhci driver. Reporting PLC to usbcore may
@@ -707,7 +707,7 @@ static u32 xhci_get_port_status(struct usb_hcd *hcd,
status |= USB_PORT_STAT_C_CONFIG_ERROR << 16;
}
- if (hcd->speed != HCD_USB3) {
+ if (hcd->speed < HCD_USB3) {
if ((raw_port_status & PORT_PLS_MASK) == XDEV_U3
&& (raw_port_status & PORT_POWER))
status |= USB_PORT_STAT_SUSPEND;
@@ -770,7 +770,7 @@ static u32 xhci_get_port_status(struct usb_hcd *hcd,
&& (raw_port_status & PORT_POWER)
&& (bus_state->suspended_ports & (1 << wIndex))) {
bus_state->suspended_ports &= ~(1 << wIndex);
- if (hcd->speed != HCD_USB3)
+ if (hcd->speed < HCD_USB3)
bus_state->port_c_suspend |= 1 << wIndex;
}
if (raw_port_status & PORT_CONNECT) {
@@ -784,13 +784,13 @@ static u32 xhci_get_port_status(struct usb_hcd *hcd,
if (raw_port_status & PORT_RESET)
status |= USB_PORT_STAT_RESET;
if (raw_port_status & PORT_POWER) {
- if (hcd->speed == HCD_USB3)
+ if (hcd->speed >= HCD_USB3)
status |= USB_SS_PORT_STAT_POWER;
else
status |= USB_PORT_STAT_POWER;
}
/* Update Port Link State */
- if (hcd->speed == HCD_USB3) {
+ if (hcd->speed >= HCD_USB3) {
xhci_hub_report_usb3_link_state(xhci, &status, raw_port_status);
/*
* Verify if all USB3 Ports Have entered U0 already.
@@ -835,7 +835,7 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
* descriptor for the USB 3.0 roothub. If not, we stall the
* endpoint, like external hubs do.
*/
- if (hcd->speed == HCD_USB3 &&
+ if (hcd->speed >= HCD_USB3 &&
(wLength < USB_DT_SS_HUB_SIZE ||
wValue != (USB_DT_SS_HUB << 8))) {
xhci_dbg(xhci, "Wrong hub descriptor type for "
@@ -1040,7 +1040,7 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
temp = readl(port_array[wIndex]);
break;
case USB_PORT_FEAT_U1_TIMEOUT:
- if (hcd->speed != HCD_USB3)
+ if (hcd->speed < HCD_USB3)
goto error;
temp = readl(port_array[wIndex] + PORTPMSC);
temp &= ~PORT_U1_TIMEOUT_MASK;
@@ -1048,7 +1048,7 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
writel(temp, port_array[wIndex] + PORTPMSC);
break;
case USB_PORT_FEAT_U2_TIMEOUT:
- if (hcd->speed != HCD_USB3)
+ if (hcd->speed < HCD_USB3)
goto error;
temp = readl(port_array[wIndex] + PORTPMSC);
temp &= ~PORT_U2_TIMEOUT_MASK;
diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
index c79d33676672..012d7f4c2901 100644
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -200,15 +200,17 @@ static int xhci_pci_setup(struct usb_hcd *hcd)
struct pci_dev *pdev = to_pci_dev(hcd->self.controller);
int retval;
+ xhci = hcd_to_xhci(hcd);
+ if (!xhci->sbrn)
+ pci_read_config_byte(pdev, XHCI_SBRN_OFFSET, &xhci->sbrn);
+
retval = xhci_gen_setup(hcd, xhci_pci_quirks);
if (retval)
return retval;
- xhci = hcd_to_xhci(hcd);
if (!usb_hcd_is_primary_hcd(hcd))
return 0;
- pci_read_config_byte(pdev, XHCI_SBRN_OFFSET, &xhci->sbrn);
xhci_dbg(xhci, "Got SBRN %u\n", (unsigned int) xhci->sbrn);
/* Find any debug ports */
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index 0e5aa8751c05..48d2d40a53bd 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -1453,7 +1453,7 @@ static unsigned int find_faked_portnum_from_hw_portnum(struct usb_hcd *hcd,
* 1.1 ports are under the USB 2.0 hub. If the port speed
* matches the device speed, it's a similar speed port.
*/
- if ((port_speed == 0x03) == (hcd->speed == HCD_USB3))
+ if ((port_speed == 0x03) == (hcd->speed >= HCD_USB3))
num_similar_speed_ports++;
}
return num_similar_speed_ports;
@@ -1515,7 +1515,7 @@ static void handle_port_status(struct xhci_hcd *xhci,
/* Find the right roothub. */
hcd = xhci_to_hcd(xhci);
- if ((major_revision == 0x03) != (hcd->speed == HCD_USB3))
+ if ((major_revision == 0x03) != (hcd->speed >= HCD_USB3))
hcd = xhci->shared_hcd;
if (major_revision == 0) {
@@ -1541,7 +1541,7 @@ static void handle_port_status(struct xhci_hcd *xhci,
* correct bus_state structure.
*/
bus_state = &xhci->bus_state[hcd_index(hcd)];
- if (hcd->speed == HCD_USB3)
+ if (hcd->speed >= HCD_USB3)
port_array = xhci->usb3_ports;
else
port_array = xhci->usb2_ports;
@@ -1555,7 +1555,7 @@ static void handle_port_status(struct xhci_hcd *xhci,
usb_hcd_resume_root_hub(hcd);
}
- if (hcd->speed == HCD_USB3 && (temp & PORT_PLS_MASK) == XDEV_INACTIVE)
+ if (hcd->speed >= HCD_USB3 && (temp & PORT_PLS_MASK) == XDEV_INACTIVE)
bus_state->port_remote_wakeup &= ~(1 << faked_port_index);
if ((temp & PORT_PLC) && (temp & PORT_PLS_MASK) == XDEV_RESUME) {
@@ -1633,7 +1633,7 @@ static void handle_port_status(struct xhci_hcd *xhci,
goto cleanup;
}
- if (hcd->speed != HCD_USB3)
+ if (hcd->speed < HCD_USB3)
xhci_test_and_clear_bit(xhci, port_array, faked_port_index,
PORT_PLC);
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 0ba6c1cc90b4..49a41c7890c8 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -3973,7 +3973,7 @@ int xhci_find_raw_port_number(struct usb_hcd *hcd, int port1)
__le32 __iomem *addr;
int raw_port;
- if (hcd->speed != HCD_USB3)
+ if (hcd->speed < HCD_USB3)
addr = xhci->usb2_ports[port1 - 1];
else
addr = xhci->usb3_ports[port1 - 1];
@@ -4124,7 +4124,7 @@ int xhci_set_usb2_hardware_lpm(struct usb_hcd *hcd,
int hird, exit_latency;
int ret;
- if (hcd->speed == HCD_USB3 || !xhci->hw_lpm_support ||
+ if (hcd->speed >= HCD_USB3 || !xhci->hw_lpm_support ||
!udev->lpm_capable)
return -EPERM;
@@ -4241,7 +4241,7 @@ int xhci_update_device(struct usb_hcd *hcd, struct usb_device *udev)
struct xhci_hcd *xhci = hcd_to_xhci(hcd);
int portnum = udev->portnum - 1;
- if (hcd->speed == HCD_USB3 || !xhci->sw_lpm_support ||
+ if (hcd->speed >= HCD_USB3 || !xhci->sw_lpm_support ||
!udev->lpm_capable)
return 0;
@@ -4841,8 +4841,9 @@ int xhci_gen_setup(struct usb_hcd *hcd, xhci_get_quirks_t get_quirks)
/* XHCI controllers don't stop the ep queue on short packets :| */
hcd->self.no_stop_on_short = 1;
+ xhci = hcd_to_xhci(hcd);
+
if (usb_hcd_is_primary_hcd(hcd)) {
- xhci = hcd_to_xhci(hcd);
xhci->main_hcd = hcd;
/* Mark the first roothub as being USB 2.0.
* The xHCI driver will register the USB 3.0 roothub.
@@ -4856,6 +4857,10 @@ int xhci_gen_setup(struct usb_hcd *hcd, xhci_get_quirks_t get_quirks)
*/
hcd->has_tt = 1;
} else {
+ if (xhci->sbrn == 0x31) {
+ xhci_info(xhci, "Host supports USB 3.1 Enhanced SuperSpeed\n");
+ hcd->speed = HCD_USB31;
+ }
/* xHCI private pointer was set in xhci_pci_probe for the second
* registered roothub.
*/
generated by cgit v1.2.3 (git 2.0.4) at 2024-12-28 20:22:08 +0000