diff options
Diffstat (limited to 'drivers/uwb/i1480')
| -rw-r--r-- | drivers/uwb/i1480/Makefile | 2 | ||||
| -rw-r--r-- | drivers/uwb/i1480/dfu/Makefile | 9 | ||||
| -rw-r--r-- | drivers/uwb/i1480/dfu/dfu.c | 217 | ||||
| -rw-r--r-- | drivers/uwb/i1480/dfu/i1480-dfu.h | 260 | ||||
| -rw-r--r-- | drivers/uwb/i1480/dfu/mac.c | 527 | ||||
| -rw-r--r-- | drivers/uwb/i1480/dfu/phy.c | 203 | ||||
| -rw-r--r-- | drivers/uwb/i1480/dfu/usb.c | 500 | ||||
| -rw-r--r-- | drivers/uwb/i1480/i1480-est.c | 99 | ||||
| -rw-r--r-- | drivers/uwb/i1480/i1480-wlp.h | 200 | ||||
| -rw-r--r-- | drivers/uwb/i1480/i1480u-wlp/Makefile | 8 | ||||
| -rw-r--r-- | drivers/uwb/i1480/i1480u-wlp/i1480u-wlp.h | 284 | ||||
| -rw-r--r-- | drivers/uwb/i1480/i1480u-wlp/lc.c | 421 | ||||
| -rw-r--r-- | drivers/uwb/i1480/i1480u-wlp/netdev.c | 368 | ||||
| -rw-r--r-- | drivers/uwb/i1480/i1480u-wlp/rx.c | 486 | ||||
| -rw-r--r-- | drivers/uwb/i1480/i1480u-wlp/sysfs.c | 408 | ||||
| -rw-r--r-- | drivers/uwb/i1480/i1480u-wlp/tx.c | 632 |
16 files changed, 4624 insertions, 0 deletions
diff --git a/drivers/uwb/i1480/Makefile b/drivers/uwb/i1480/Makefile new file mode 100644 index 000000000000..212bbc7d4c32 --- /dev/null +++ b/drivers/uwb/i1480/Makefile @@ -0,0 +1,2 @@ +obj-$(CONFIG_UWB_I1480U) += dfu/ i1480-est.o +obj-$(CONFIG_UWB_I1480U_WLP) += i1480u-wlp/ diff --git a/drivers/uwb/i1480/dfu/Makefile b/drivers/uwb/i1480/dfu/Makefile new file mode 100644 index 000000000000..bd1b9f25424c --- /dev/null +++ b/drivers/uwb/i1480/dfu/Makefile @@ -0,0 +1,9 @@ +obj-$(CONFIG_UWB_I1480U) += i1480-dfu-usb.o + +i1480-dfu-usb-objs := \ + dfu.o \ + mac.o \ + phy.o \ + usb.o + + diff --git a/drivers/uwb/i1480/dfu/dfu.c b/drivers/uwb/i1480/dfu/dfu.c new file mode 100644 index 000000000000..9097b3b30385 --- /dev/null +++ b/drivers/uwb/i1480/dfu/dfu.c @@ -0,0 +1,217 @@ +/* + * Intel Wireless UWB Link 1480 + * Main driver + * + * Copyright (C) 2005-2006 Intel Corporation + * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + * + * + * Common code for firmware upload used by the USB and PCI version; + * i1480_fw_upload() takes a device descriptor and uses the function + * pointers it provides to upload firmware and prepare the PHY. + * + * As well, provides common functions used by the rest of the code. + */ +#include "i1480-dfu.h" +#include <linux/errno.h> +#include <linux/delay.h> +#include <linux/pci.h> +#include <linux/device.h> +#include <linux/uwb.h> +#include <linux/random.h> + +#define D_LOCAL 0 +#include <linux/uwb/debug.h> + +/** + * i1480_rceb_check - Check RCEB for expected field values + * @i1480: pointer to device for which RCEB is being checked + * @rceb: RCEB being checked + * @cmd: which command the RCEB is related to + * @context: expected context + * @expected_type: expected event type + * @expected_event: expected event + * + * If @cmd is NULL, do not print error messages, but still return an error + * code. + * + * Return 0 if @rceb matches the expected values, -EINVAL otherwise. + */ +int i1480_rceb_check(const struct i1480 *i1480, const struct uwb_rceb *rceb, + const char *cmd, u8 context, u8 expected_type, + unsigned expected_event) +{ + int result = 0; + struct device *dev = i1480->dev; + if (rceb->bEventContext != context) { + if (cmd) + dev_err(dev, "%s: unexpected context id 0x%02x " + "(expected 0x%02x)\n", cmd, + rceb->bEventContext, context); + result = -EINVAL; + } + if (rceb->bEventType != expected_type) { + if (cmd) + dev_err(dev, "%s: unexpected event type 0x%02x " + "(expected 0x%02x)\n", cmd, + rceb->bEventType, expected_type); + result = -EINVAL; + } + if (le16_to_cpu(rceb->wEvent) != expected_event) { + if (cmd) + dev_err(dev, "%s: unexpected event 0x%04x " + "(expected 0x%04x)\n", cmd, + le16_to_cpu(rceb->wEvent), expected_event); + result = -EINVAL; + } + return result; +} +EXPORT_SYMBOL_GPL(i1480_rceb_check); + + +/** + * Execute a Radio Control Command + * + * Command data has to be in i1480->cmd_buf. + * + * @returns size of the reply data filled in i1480->evt_buf or < 0 errno + * code on error. + */ +ssize_t i1480_cmd(struct i1480 *i1480, const char *cmd_name, size_t cmd_size, + size_t reply_size) +{ + ssize_t result; + struct uwb_rceb *reply = i1480->evt_buf; + struct uwb_rccb *cmd = i1480->cmd_buf; + u16 expected_event = reply->wEvent; + u8 expected_type = reply->bEventType; + u8 context; + + d_fnstart(3, i1480->dev, "(%p, %s, %zu)\n", i1480, cmd_name, cmd_size); + init_completion(&i1480->evt_complete); + i1480->evt_result = -EINPROGRESS; + do { + get_random_bytes(&context, 1); + } while (context == 0x00 || context == 0xff); + cmd->bCommandContext = context; + result = i1480->cmd(i1480, cmd_name, cmd_size); + if (result < 0) + goto error; + /* wait for the callback to report a event was received */ + result = wait_for_completion_interruptible_timeout( + &i1480->evt_complete, HZ); + if (result == 0) { + result = -ETIMEDOUT; + goto error; + } + if (result < 0) + goto error; + result = i1480->evt_result; + if (result < 0) { + dev_err(i1480->dev, "%s: command reply reception failed: %zd\n", + cmd_name, result); + goto error; + } + /* + * Firmware versions >= 1.4.12224 for IOGear GUWA100U generate a + * spurious notification after firmware is downloaded. So check whether + * the receibed RCEB is such notification before assuming that the + * command has failed. + */ + if (i1480_rceb_check(i1480, i1480->evt_buf, NULL, + 0, 0xfd, 0x0022) == 0) { + /* Now wait for the actual RCEB for this command. */ + result = i1480->wait_init_done(i1480); + if (result < 0) + goto error; + result = i1480->evt_result; + } + if (result != reply_size) { + dev_err(i1480->dev, "%s returned only %zu bytes, %zu expected\n", + cmd_name, result, reply_size); + result = -EINVAL; + goto error; + } + /* Verify we got the right event in response */ + result = i1480_rceb_check(i1480, i1480->evt_buf, cmd_name, context, + expected_type, expected_event); +error: + d_fnend(3, i1480->dev, "(%p, %s, %zu) = %zd\n", + i1480, cmd_name, cmd_size, result); + return result; +} +EXPORT_SYMBOL_GPL(i1480_cmd); + + +static +int i1480_print_state(struct i1480 *i1480) +{ + int result; + u32 *buf = (u32 *) i1480->cmd_buf; + + result = i1480->read(i1480, 0x80080000, 2 * sizeof(*buf)); + if (result < 0) { + dev_err(i1480->dev, "cannot read U & L states: %d\n", result); + goto error; + } + dev_info(i1480->dev, "state U 0x%08x, L 0x%08x\n", buf[0], buf[1]); +error: + return result; +} + + +/* + * PCI probe, firmware uploader + * + * _mac_fw_upload() will call rc_setup(), which needs an rc_release(). + */ +int i1480_fw_upload(struct i1480 *i1480) +{ + int result; + + result = i1480_pre_fw_upload(i1480); /* PHY pre fw */ + if (result < 0 && result != -ENOENT) { + i1480_print_state(i1480); + goto error; + } + result = i1480_mac_fw_upload(i1480); /* MAC fw */ + if (result < 0) { + if (result == -ENOENT) + dev_err(i1480->dev, "Cannot locate MAC FW file '%s'\n", + i1480->mac_fw_name); + else + i1480_print_state(i1480); + goto error; + } + result = i1480_phy_fw_upload(i1480); /* PHY fw */ + if (result < 0 && result != -ENOENT) { + i1480_print_state(i1480); + goto error_rc_release; + } + /* + * FIXME: find some reliable way to check whether firmware is running + * properly. Maybe use some standard request that has no side effects? + */ + dev_info(i1480->dev, "firmware uploaded successfully\n"); +error_rc_release: + if (i1480->rc_release) + i1480->rc_release(i1480); + result = 0; +error: + return result; +} +EXPORT_SYMBOL_GPL(i1480_fw_upload); diff --git a/drivers/uwb/i1480/dfu/i1480-dfu.h b/drivers/uwb/i1480/dfu/i1480-dfu.h new file mode 100644 index 000000000000..46f45e800f36 --- /dev/null +++ b/drivers/uwb/i1480/dfu/i1480-dfu.h @@ -0,0 +1,260 @@ +/* + * i1480 Device Firmware Upload + * + * Copyright (C) 2005-2006 Intel Corporation + * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + * + * + * This driver is the firmware uploader for the Intel Wireless UWB + * Link 1480 device (both in the USB and PCI incarnations). + * + * The process is quite simple: we stop the device, write the firmware + * to its memory and then restart it. Wait for the device to let us + * know it is done booting firmware. Ready. + * + * We might have to upload before or after a phy firmware (which might + * be done in two methods, using a normal firmware image or through + * the MPI port). + * + * Because USB and PCI use common methods, we just make ops out of the + * common operations (read, write, wait_init_done and cmd) and + * implement them in usb.c and pci.c. + * + * The flow is (some parts omitted): + * + * i1480_{usb,pci}_probe() On enumerate/discovery + * i1480_fw_upload() + * i1480_pre_fw_upload() + * __mac_fw_upload() + * fw_hdrs_load() + * mac_fw_hdrs_push() + * i1480->write() [i1480_{usb,pci}_write()] + * i1480_fw_cmp() + * i1480->read() [i1480_{usb,pci}_read()] + * i1480_mac_fw_upload() + * __mac_fw_upload() + * i1480->setup(() + * i1480->wait_init_done() + * i1480_cmd_reset() + * i1480->cmd() [i1480_{usb,pci}_cmd()] + * ... + * i1480_phy_fw_upload() + * request_firmware() + * i1480_mpi_write() + * i1480->cmd() [i1480_{usb,pci}_cmd()] + * + * Once the probe function enumerates the device and uploads the + * firmware, we just exit with -ENODEV, as we don't really want to + * attach to the device. + */ +#ifndef __i1480_DFU_H__ +#define __i1480_DFU_H__ + +#include <linux/uwb/spec.h> +#include <linux/types.h> +#include <linux/completion.h> + +#define i1480_FW_UPLOAD_MODE_MASK (cpu_to_le32(0x00000018)) + +#if i1480_FW > 0x00000302 +#define i1480_RCEB_EXTENDED +#endif + +struct uwb_rccb; +struct uwb_rceb; + +/* + * Common firmware upload handlers + * + * Normally you embed this struct in another one specific to your hw. + * + * @write Write to device's memory from buffer. + * @read Read from device's memory to i1480->evt_buf. + * @setup Setup device after basic firmware is uploaded + * @wait_init_done + * Wait for the device to send a notification saying init + * is done. + * @cmd FOP for issuing the command to the hardware. The + * command data is contained in i1480->cmd_buf and the size + * is supplied as an argument. The command replied is put + * in i1480->evt_buf and the size in i1480->evt_result (or if + * an error, a < 0 errno code). + * + * @cmd_buf Memory buffer used to send commands to the device. + * Allocated by the upper layers i1480_fw_upload(). + * Size has to be @buf_size. + * @evt_buf Memory buffer used to place the async notifications + * received by the hw. Allocated by the upper layers + * i1480_fw_upload(). + * Size has to be @buf_size. + * @cmd_complete + * Low level driver uses this to notify code waiting afor + * an event that the event has arrived and data is in + * i1480->evt_buf (and size/result in i1480->evt_result). + * @hw_rev + * Use this value to activate dfu code to support new revisions + * of hardware. i1480_init() sets this to a default value. + * It should be updated by the USB and PCI code. + */ +struct i1480 { + struct device *dev; + + int (*write)(struct i1480 *, u32 addr, const void *, size_t); + int (*read)(struct i1480 *, u32 addr, size_t); + int (*rc_setup)(struct i1480 *); + void (*rc_release)(struct i1480 *); + int (*wait_init_done)(struct i1480 *); + int (*cmd)(struct i1480 *, const char *cmd_name, size_t cmd_size); + const char *pre_fw_name; + const char *mac_fw_name; + const char *mac_fw_name_deprecate; /* FIXME: Will go away */ + const char *phy_fw_name; + u8 hw_rev; + + size_t buf_size; /* size of both evt_buf and cmd_buf */ + void *evt_buf, *cmd_buf; + ssize_t evt_result; + struct completion evt_complete; +}; + +static inline +void i1480_init(struct i1480 *i1480) +{ + i1480->hw_rev = 1; + init_completion(&i1480->evt_complete); +} + +extern int i1480_fw_upload(struct i1480 *); +extern int i1480_pre_fw_upload(struct i1480 *); +extern int i1480_mac_fw_upload(struct i1480 *); +extern int i1480_phy_fw_upload(struct i1480 *); +extern ssize_t i1480_cmd(struct i1480 *, const char *, size_t, size_t); +extern int i1480_rceb_check(const struct i1480 *, + const struct uwb_rceb *, const char *, u8, + u8, unsigned); + +enum { + /* Vendor specific command type */ + i1480_CET_VS1 = 0xfd, + /* i1480 commands */ + i1480_CMD_SET_IP_MAS = 0x000e, + i1480_CMD_GET_MAC_PHY_INFO = 0x0003, + i1480_CMD_MPI_WRITE = 0x000f, + i1480_CMD_MPI_READ = 0x0010, + /* i1480 events */ +#if i1480_FW > 0x00000302 + i1480_EVT_CONFIRM = 0x0002, + i1480_EVT_RM_INIT_DONE = 0x0101, + i1480_EVT_DEV_ADD = 0x0103, + i1480_EVT_DEV_RM = 0x0104, + i1480_EVT_DEV_ID_CHANGE = 0x0105, + i1480_EVT_GET_MAC_PHY_INFO = i1480_CMD_GET_MAC_PHY_INFO, +#else + i1480_EVT_CONFIRM = 0x0002, + i1480_EVT_RM_INIT_DONE = 0x0101, + i1480_EVT_DEV_ADD = 0x0103, + i1480_EVT_DEV_RM = 0x0104, + i1480_EVT_DEV_ID_CHANGE = 0x0105, + i1480_EVT_GET_MAC_PHY_INFO = i1480_EVT_CONFIRM, +#endif +}; + + +struct i1480_evt_confirm { + struct uwb_rceb rceb; +#ifdef i1480_RCEB_EXTENDED + __le16 wParamLength; +#endif + u8 bResultCode; +} __attribute__((packed)); + + +struct i1480_rceb { + struct uwb_rceb rceb; +#ifdef i1480_RCEB_EXTENDED + __le16 wParamLength; +#endif +} __attribute__((packed)); + + +/** + * Get MAC & PHY Information confirm event structure + * + * Confirm event returned by the command. + */ +struct i1480_evt_confirm_GMPI { +#if i1480_FW > 0x00000302 + struct uwb_rceb rceb; + __le16 wParamLength; + __le16 status; + u8 mac_addr[6]; /* EUI-64 bit IEEE address [still 8 bytes?] */ + u8 dev_addr[2]; + __le16 mac_fw_rev; /* major = v >> 8; minor = v & 0xff */ + u8 hw_rev; + u8 phy_vendor; + u8 phy_rev; /* major v = >> 8; minor = v & 0xff */ + __le16 mac_caps; + u8 phy_caps[3]; + u8 key_stores; + __le16 mcast_addr_stores; + u8 sec_mode_supported; +#else + struct uwb_rceb rceb; + u8 status; + u8 mac_addr[8]; /* EUI-64 bit IEEE address [still 8 bytes?] */ + u8 dev_addr[2]; + __le16 mac_fw_rev; /* major = v >> 8; minor = v & 0xff */ + __le16 phy_fw_rev; /* major v = >> 8; minor = v & 0xff */ + __le16 mac_caps; + u8 phy_caps; + u8 key_stores; + __le16 mcast_addr_stores; + u8 sec_mode_supported; +#endif +} __attribute__((packed)); + + +struct i1480_cmd_mpi_write { + struct uwb_rccb rccb; + __le16 size; + u8 data[]; +}; + + +struct i1480_cmd_mpi_read { + struct uwb_rccb rccb; + __le16 size; + struct { + u8 page, offset; + } __attribute__((packed)) data[]; +} __attribute__((packed)); + + +struct i1480_evt_mpi_read { + struct uwb_rceb rceb; +#ifdef i1480_RCEB_EXTENDED + __le16 wParamLength; +#endif + u8 bResultCode; + __le16 size; + struct { + u8 page, offset, value; + } __attribute__((packed)) data[]; +} __attribute__((packed)); + + +#endif /* #ifndef __i1480_DFU_H__ */ diff --git a/drivers/uwb/i1480/dfu/mac.c b/drivers/uwb/i1480/dfu/mac.c new file mode 100644 index 000000000000..2e4d8f07c165 --- /dev/null +++ b/drivers/uwb/i1480/dfu/mac.c @@ -0,0 +1,527 @@ +/* + * Intel Wireless UWB Link 1480 + * MAC Firmware upload implementation + * + * Copyright (C) 2005-2006 Intel Corporation + * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + * + * + * Implementation of the code for parsing the firmware file (extract + * the headers and binary code chunks) in the fw_*() functions. The + * code to upload pre and mac firmwares is the same, so it uses a + * common entry point in __mac_fw_upload(), which uses the i1480 + * function pointers to push the firmware to the device. + */ +#include <linux/delay.h> +#include <linux/firmware.h> +#include <linux/uwb.h> +#include "i1480-dfu.h" + +#define D_LOCAL 0 +#include <linux/uwb/debug.h> + +/* + * Descriptor for a continuous segment of MAC fw data + */ +struct fw_hdr { + unsigned long address; + size_t length; + const u32 *bin; + struct fw_hdr *next; +}; + + +/* Free a chain of firmware headers */ +static +void fw_hdrs_free(struct fw_hdr *hdr) +{ + struct fw_hdr *next; + + while (hdr) { + next = hdr->next; + kfree(hdr); + hdr = next; + } +} + + +/* Fill a firmware header descriptor from a memory buffer */ +static +int fw_hdr_load(struct i1480 *i1480, struct fw_hdr *hdr, unsigned hdr_cnt, + const char *_data, const u32 *data_itr, const u32 *data_top) +{ + size_t hdr_offset = (const char *) data_itr - _data; + size_t remaining_size = (void *) data_top - (void *) data_itr; + if (data_itr + 2 > data_top) { + dev_err(i1480->dev, "fw hdr #%u/%zu: EOF reached in header at " + "offset %zu, limit %zu\n", + hdr_cnt, hdr_offset, + (const char *) data_itr + 2 - _data, + (const char *) data_top - _data); + return -EINVAL; + } + hdr->next = NULL; + hdr->address = le32_to_cpu(*data_itr++); + hdr->length = le32_to_cpu(*data_itr++); + hdr->bin = data_itr; + if (hdr->length > remaining_size) { + dev_err(i1480->dev, "fw hdr #%u/%zu: EOF reached in data; " + "chunk too long (%zu bytes), only %zu left\n", + hdr_cnt, hdr_offset, hdr->length, remaining_size); + return -EINVAL; + } + return 0; +} + + +/** + * Get a buffer where the firmware is supposed to be and create a + * chain of headers linking them together. + * + * @phdr: where to place the pointer to the first header (headers link + * to the next via the @hdr->next ptr); need to free the whole + * chain when done. + * + * @_data: Pointer to the data buffer. + * + * @_data_size: Size of the data buffer (bytes); data size has to be a + * multiple of 4. Function will fail if not. + * + * Goes over the whole binary blob; reads the first chunk and creates + * a fw hdr from it (which points to where the data is in @_data and + * the length of the chunk); then goes on to the next chunk until + * done. Each header is linked to the next. + */ +static +int fw_hdrs_load(struct i1480 *i1480, struct fw_hdr **phdr, + const char *_data, size_t data_size) +{ + int result; + unsigned hdr_cnt = 0; + u32 *data = (u32 *) _data, *data_itr, *data_top; + struct fw_hdr *hdr, **prev_hdr = phdr; + + result = -EINVAL; + /* Check size is ok and pointer is aligned */ + if (data_size % sizeof(u32) != 0) + goto error; + if ((unsigned long) _data % sizeof(u16) != 0) + goto error; + *phdr = NULL; + data_itr = data; + data_top = (u32 *) (_data + data_size); + while (data_itr < data_top) { + result = -ENOMEM; + hdr = kmalloc(sizeof(*hdr), GFP_KERNEL); + if (hdr == NULL) { + dev_err(i1480->dev, "Cannot allocate fw header " + "for chunk #%u\n", hdr_cnt); + goto error_alloc; + } + result = fw_hdr_load(i1480, hdr, hdr_cnt, + _data, data_itr, data_top); + if (result < 0) + goto error_load; + data_itr += 2 + hdr->length; + *prev_hdr = hdr; + prev_hdr = &hdr->next; + hdr_cnt++; + }; + *prev_hdr = NULL; + return 0; + +error_load: + kfree(hdr); +error_alloc: + fw_hdrs_free(*phdr); +error: + return result; +} + + +/** + * Compares a chunk of fw with one in the devices's memory + * + * @i1480: Device instance + * @hdr: Pointer to the firmware chunk + * @returns: 0 if equal, < 0 errno on error. If > 0, it is the offset + * where the difference was found (plus one). + * + * Kind of dirty and simplistic, but does the trick in both the PCI + * and USB version. We do a quick[er] memcmp(), and if it fails, we do + * a byte-by-byte to find the offset. + */ +static +ssize_t i1480_fw_cmp(struct i1480 *i1480, struct fw_hdr *hdr) +{ + ssize_t result = 0; + u32 src_itr = 0, cnt; + size_t size = hdr->length*sizeof(hdr->bin[0]); + size_t chunk_size; + u8 *bin = (u8 *) hdr->bin; + + while (size > 0) { + chunk_size = size < i1480->buf_size ? size : i1480->buf_size; + result = i1480->read(i1480, hdr->address + src_itr, chunk_size); + if (result < 0) { + dev_err(i1480->dev, "error reading for verification: " + "%zd\n", result); + goto error; + } + if (memcmp(i1480->cmd_buf, bin + src_itr, result)) { + u8 *buf = i1480->cmd_buf; + d_printf(2, i1480->dev, + "original data @ %p + %u, %zu bytes\n", + bin, src_itr, result); + d_dump(4, i1480->dev, bin + src_itr, result); + for (cnt = 0; cnt < result; cnt++) + if (bin[src_itr + cnt] != buf[cnt]) { + dev_err(i1480->dev, "byte failed at " + "src_itr %u cnt %u [0x%02x " + "vs 0x%02x]\n", src_itr, cnt, + bin[src_itr + cnt], buf[cnt]); + result = src_itr + cnt + 1; + goto cmp_failed; + } + } + src_itr += result; + size -= result; + } + result = 0; +error: +cmp_failed: + return result; +} + + +/** + * Writes firmware headers to the device. + * + * @prd: PRD instance + * @hdr: Processed firmware + * @returns: 0 if ok, < 0 errno on error. + */ +static +int mac_fw_hdrs_push(struct i1480 *i1480, struct fw_hdr *hdr, + const char *fw_name, const char *fw_tag) +{ + struct device *dev = i1480->dev; + ssize_t result = 0; + struct fw_hdr *hdr_itr; + int verif_retry_count; + + d_fnstart(3, dev, "(%p, %p)\n", i1480, hdr); + /* Now, header by header, push them to the hw */ + for (hdr_itr = hdr; hdr_itr != NULL; hdr_itr = hdr_itr->next) { + verif_retry_count = 0; +retry: + dev_dbg(dev, "fw chunk (%zu @ 0x%08lx)\n", + hdr_itr->length * sizeof(hdr_itr->bin[0]), + hdr_itr->address); + result = i1480->write(i1480, hdr_itr->address, hdr_itr->bin, + hdr_itr->length*sizeof(hdr_itr->bin[0])); + if (result < 0) { + dev_err(dev, "%s fw '%s': write failed (%zuB @ 0x%lx):" + " %zd\n", fw_tag, fw_name, + hdr_itr->length * sizeof(hdr_itr->bin[0]), + hdr_itr->address, result); + break; + } + result = i1480_fw_cmp(i1480, hdr_itr); + if (result < 0) { + dev_err(dev, "%s fw '%s': verification read " + "failed (%zuB @ 0x%lx): %zd\n", + fw_tag, fw_name, + hdr_itr->length * sizeof(hdr_itr->bin[0]), + hdr_itr->address, result); + break; + } + if (result > 0) { /* Offset where it failed + 1 */ + result--; + dev_err(dev, "%s fw '%s': WARNING: verification " + "failed at 0x%lx: retrying\n", + fw_tag, fw_name, hdr_itr->address + result); + if (++verif_retry_count < 3) + goto retry; /* write this block again! */ + dev_err(dev, "%s fw '%s': verification failed at 0x%lx: " + "tried %d times\n", fw_tag, fw_name, + hdr_itr->address + result, verif_retry_count); + result = -EINVAL; + break; + } + } + d_fnend(3, dev, "(%zd)\n", result); + return result; +} + + +/** Puts the device in firmware upload mode.*/ +static +int mac_fw_upload_enable(struct i1480 *i1480) +{ + int result; + u32 reg = 0x800000c0; + u32 *buffer = (u32 *)i1480->cmd_buf; + + if (i1480->hw_rev > 1) + reg = 0x8000d0d4; + result = i1480->read(i1480, reg, sizeof(u32)); + if (result < 0) + goto error_cmd; + *buffer &= ~i1480_FW_UPLOAD_MODE_MASK; + result = i1480->write(i1480, reg, buffer, sizeof(u32)); + if (result < 0) + goto error_cmd; + return 0; +error_cmd: + dev_err(i1480->dev, "can't enable fw upload mode: %d\n", result); + return result; +} + + +/** Gets the device out of firmware upload mode. */ +static +int mac_fw_upload_disable(struct i1480 *i1480) +{ + int result; + u32 reg = 0x800000c0; + u32 *buffer = (u32 *)i1480->cmd_buf; + + if (i1480->hw_rev > 1) + reg = 0x8000d0d4; + result = i1480->read(i1480, reg, sizeof(u32)); + if (result < 0) + goto error_cmd; + *buffer |= i1480_FW_UPLOAD_MODE_MASK; + result = i1480->write(i1480, reg, buffer, sizeof(u32)); + if (result < 0) + goto error_cmd; + return 0; +error_cmd: + dev_err(i1480->dev, "can't disable fw upload mode: %d\n", result); + return result; +} + + + +/** + * Generic function for uploading a MAC firmware. + * + * @i1480: Device instance + * @fw_name: Name of firmware file to upload. + * @fw_tag: Name of the firmware type (for messages) + * [eg: MAC, PRE] + * @do_wait: Wait for device to emit initialization done message (0 + * for PRE fws, 1 for MAC fws). + * @returns: 0 if ok, < 0 errno on error. + */ +static +int __mac_fw_upload(struct i1480 *i1480, const char *fw_name, + const char *fw_tag) +{ + int result; + const struct firmware *fw; + struct fw_hdr *fw_hdrs; + + d_fnstart(3, i1480->dev, "(%p, %s, %s)\n", i1480, fw_name, fw_tag); + result = request_firmware(&fw, fw_name, i1480->dev); + if (result < 0) /* Up to caller to complain on -ENOENT */ + goto out; + d_printf(3, i1480->dev, "%s fw '%s': uploading\n", fw_tag, fw_name); + result = fw_hdrs_load(i1480, &fw_hdrs, fw->data, fw->size); + if (result < 0) { + dev_err(i1480->dev, "%s fw '%s': failed to parse firmware " + "file: %d\n", fw_tag, fw_name, result); + goto out_release; + } + result = mac_fw_upload_enable(i1480); + if (result < 0) + goto out_hdrs_release; + result = mac_fw_hdrs_push(i1480, fw_hdrs, fw_name, fw_tag); + mac_fw_upload_disable(i1480); +out_hdrs_release: + if (result >= 0) + dev_info(i1480->dev, "%s fw '%s': uploaded\n", fw_tag, fw_name); + else + dev_err(i1480->dev, "%s fw '%s': failed to upload (%d), " + "power cycle device\n", fw_tag, fw_name, result); + fw_hdrs_free(fw_hdrs); +out_release: + release_firmware(fw); +out: + d_fnend(3, i1480->dev, "(%p, %s, %s) = %d\n", i1480, fw_name, fw_tag, + result); + return result; +} + + +/** + * Upload a pre-PHY firmware + * + */ +int i1480_pre_fw_upload(struct i1480 *i1480) +{ + int result; + result = __mac_fw_upload(i1480, i1480->pre_fw_name, "PRE"); + if (result == 0) + msleep(400); + return result; +} + + +/** + * Reset a the MAC and PHY + * + * @i1480: Device's instance + * @returns: 0 if ok, < 0 errno code on error + * + * We put the command on kmalloc'ed memory as some arches cannot do + * USB from the stack. The reply event is copied from an stage buffer, + * so it can be in the stack. See WUSB1.0[8.6.2.4] for more details. + * + * We issue the reset to make sure the UWB controller reinits the PHY; + * this way we can now if the PHY init went ok. + */ +static +int i1480_cmd_reset(struct i1480 *i1480) +{ + int result; + struct uwb_rccb *cmd = (void *) i1480->cmd_buf; + struct i1480_evt_reset { + struct uwb_rceb rceb; + u8 bResultCode; + } __attribute__((packed)) *reply = (void *) i1480->evt_buf; + + result = -ENOMEM; + cmd->bCommandType = UWB_RC_CET_GENERAL; + cmd->wCommand = cpu_to_le16(UWB_RC_CMD_RESET); + reply->rceb.bEventType = UWB_RC_CET_GENERAL; + reply->rceb.wEvent = UWB_RC_CMD_RESET; + result = i1480_cmd(i1480, "RESET", sizeof(*cmd), sizeof(*reply)); + if (result < 0) + goto out; + if (reply->bResultCode != UWB_RC_RES_SUCCESS) { + dev_err(i1480->dev, "RESET: command execution failed: %u\n", + reply->bResultCode); + result = -EIO; + } +out: + return result; + +} + + +/* Wait for the MAC FW to start running */ +static +int i1480_fw_is_running_q(struct i1480 *i1480) +{ + int cnt = 0; + int result; + u32 *val = (u32 *) i1480->cmd_buf; + + d_fnstart(3, i1480->dev, "(i1480 %p)\n", i1480); + for (cnt = 0; cnt < 10; cnt++) { + msleep(100); + result = i1480->read(i1480, 0x80080000, 4); + if (result < 0) { + dev_err(i1480->dev, "Can't read 0x8008000: %d\n", result); + goto out; + } + if (*val == 0x55555555UL) /* fw running? cool */ + goto out; + } + dev_err(i1480->dev, "Timed out waiting for fw to start\n"); + result = -ETIMEDOUT; +out: + d_fnend(3, i1480->dev, "(i1480 %p) = %d\n", i1480, result); + return result; + +} + + +/** + * Upload MAC firmware, wait for it to start + * + * @i1480: Device instance + * @fw_name: Name of the file that contains the firmware + * + * This has to be called after the pre fw has been uploaded (if + * there is any). + */ +int i1480_mac_fw_upload(struct i1480 *i1480) +{ + int result = 0, deprecated_name = 0; + struct i1480_rceb *rcebe = (void *) i1480->evt_buf; + + d_fnstart(3, i1480->dev, "(%p)\n", i1480); + result = __mac_fw_upload(i1480, i1480->mac_fw_name, "MAC"); + if (result == -ENOENT) { + result = __mac_fw_upload(i1480, i1480->mac_fw_name_deprecate, + "MAC"); + deprecated_name = 1; + } + if (result < 0) + return result; + if (deprecated_name == 1) + dev_warn(i1480->dev, + "WARNING: firmware file name %s is deprecated, " + "please rename to %s\n", + i1480->mac_fw_name_deprecate, i1480->mac_fw_name); + result = i1480_fw_is_running_q(i1480); + if (result < 0) + goto error_fw_not_running; + result = i1480->rc_setup ? i1480->rc_setup(i1480) : 0; + if (result < 0) { + dev_err(i1480->dev, "Cannot setup after MAC fw upload: %d\n", + result); + goto error_setup; + } + result = i1480->wait_init_done(i1480); /* wait init'on */ + if (result < 0) { + dev_err(i1480->dev, "MAC fw '%s': Initialization timed out " + "(%d)\n", i1480->mac_fw_name, result); + goto error_init_timeout; + } + /* verify we got the right initialization done event */ + if (i1480->evt_result != sizeof(*rcebe)) { + dev_err(i1480->dev, "MAC fw '%s': initialization event returns " + "wrong size (%zu bytes vs %zu needed)\n", + i1480->mac_fw_name, i1480->evt_result, sizeof(*rcebe)); + dump_bytes(i1480->dev, rcebe, min(i1480->evt_result, (ssize_t)32)); + goto error_size; + } + result = -EIO; + if (i1480_rceb_check(i1480, &rcebe->rceb, NULL, 0, i1480_CET_VS1, + i1480_EVT_RM_INIT_DONE) < 0) { + dev_err(i1480->dev, "wrong initialization event 0x%02x/%04x/%02x " + "received; expected 0x%02x/%04x/00\n", + rcebe->rceb.bEventType, le16_to_cpu(rcebe->rceb.wEvent), + rcebe->rceb.bEventContext, i1480_CET_VS1, + i1480_EVT_RM_INIT_DONE); + goto error_init_timeout; + } + result = i1480_cmd_reset(i1480); + if (result < 0) + dev_err(i1480->dev, "MAC fw '%s': MBOA reset failed (%d)\n", + i1480->mac_fw_name, result); +error_fw_not_running: +error_init_timeout: +error_size: +error_setup: + d_fnend(3, i1480->dev, "(i1480 %p) = %d\n", i1480, result); + return result; +} diff --git a/drivers/uwb/i1480/dfu/phy.c b/drivers/uwb/i1480/dfu/phy.c new file mode 100644 index 000000000000..3b1a87de8e63 --- /dev/null +++ b/drivers/uwb/i1480/dfu/phy.c @@ -0,0 +1,203 @@ +/* + * Intel Wireless UWB Link 1480 + * PHY parameters upload + * + * Copyright (C) 2005-2006 Intel Corporation + * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + * + * + * Code for uploading the PHY parameters to the PHY through the UWB + * Radio Control interface. + * + * We just send the data through the MPI interface using HWA-like + * commands and then reset the PHY to make sure it is ok. + */ +#include <linux/delay.h> +#include <linux/device.h> +#include <linux/firmware.h> +#include <linux/usb/wusb.h> +#include "i1480-dfu.h" + + +/** + * Write a value array to an address of the MPI interface + * + * @i1480: Device descriptor + * @data: Data array to write + * @size: Size of the data array + * @returns: 0 if ok, < 0 errno code on error. + * + * The data array is organized into pairs: + * + * ADDRESS VALUE + * + * ADDRESS is BE 16 bit unsigned, VALUE 8 bit unsigned. Size thus has + * to be a multiple of three. + */ +static +int i1480_mpi_write(struct i1480 *i1480, const void *data, size_t size) +{ + int result; + struct i1480_cmd_mpi_write *cmd = i1480->cmd_buf; + struct i1480_evt_confirm *reply = i1480->evt_buf; + + BUG_ON(size > 480); + result = -ENOMEM; + cmd->rccb.bCommandType = i1480_CET_VS1; + cmd->rccb.wCommand = cpu_to_le16(i1480_CMD_MPI_WRITE); + cmd->size = cpu_to_le16(size); + memcpy(cmd->data, data, size); + reply->rceb.bEventType = i1480_CET_VS1; + reply->rceb.wEvent = i1480_CMD_MPI_WRITE; + result = i1480_cmd(i1480, "MPI-WRITE", sizeof(*cmd) + size, sizeof(*reply)); + if (result < 0) + goto out; + if (reply->bResultCode != UWB_RC_RES_SUCCESS) { + dev_err(i1480->dev, "MPI-WRITE: command execution failed: %d\n", + reply->bResultCode); + result = -EIO; + } +out: + return result; +} + + +/** + * Read a value array to from an address of the MPI interface + * + * @i1480: Device descriptor + * @data: where to place the read array + * @srcaddr: Where to read from + * @size: Size of the data read array + * @returns: 0 if ok, < 0 errno code on error. + * + * The command data array is organized into pairs ADDR0 ADDR1..., and + * the returned data in ADDR0 VALUE0 ADDR1 VALUE1... + * + * We generate the command array to be a sequential read and then + * rearrange the result. + * + * We use the i1480->cmd_buf for the command, i1480->evt_buf for the reply. + * + * As the reply has to fit in 512 bytes (i1480->evt_buffer), the max amount + * of values we can read is (512 - sizeof(*reply)) / 3 + */ +static +int i1480_mpi_read(struct i1480 *i1480, u8 *data, u16 srcaddr, size_t size) +{ + int result; + struct i1480_cmd_mpi_read *cmd = i1480->cmd_buf; + struct i1480_evt_mpi_read *reply = i1480->evt_buf; + unsigned cnt; + + memset(i1480->cmd_buf, 0x69, 512); + memset(i1480->evt_buf, 0x69, 512); + + BUG_ON(size > (i1480->buf_size - sizeof(*reply)) / 3); + result = -ENOMEM; + cmd->rccb.bCommandType = i1480_CET_VS1; + cmd->rccb.wCommand = cpu_to_le16(i1480_CMD_MPI_READ); + cmd->size = cpu_to_le16(3*size); + for (cnt = 0; cnt < size; cnt++) { + cmd->data[cnt].page = (srcaddr + cnt) >> 8; + cmd->data[cnt].offset = (srcaddr + cnt) & 0xff; + } + reply->rceb.bEventType = i1480_CET_VS1; + reply->rceb.wEvent = i1480_CMD_MPI_READ; + result = i1480_cmd(i1480, "MPI-READ", sizeof(*cmd) + 2*size, + sizeof(*reply) + 3*size); + if (result < 0) + goto out; + if (reply->bResultCode != UWB_RC_RES_SUCCESS) { + dev_err(i1480->dev, "MPI-READ: command execution failed: %d\n", + reply->bResultCode); + result = -EIO; + } + for (cnt = 0; cnt < size; cnt++) { + if (reply->data[cnt].page != (srcaddr + cnt) >> 8) + dev_err(i1480->dev, "MPI-READ: page inconsistency at " + "index %u: expected 0x%02x, got 0x%02x\n", cnt, + (srcaddr + cnt) >> 8, reply->data[cnt].page); + if (reply->data[cnt].offset != ((srcaddr + cnt) & 0x00ff)) + dev_err(i1480->dev, "MPI-READ: offset inconsistency at " + "index %u: expected 0x%02x, got 0x%02x\n", cnt, + (srcaddr + cnt) & 0x00ff, + reply->data[cnt].offset); + data[cnt] = reply->data[cnt].value; + } + result = 0; +out: + return result; +} + + +/** + * Upload a PHY firmware, wait for it to start + * + * @i1480: Device instance + * @fw_name: Name of the file that contains the firmware + * + * We assume the MAC fw is up and running. This means we can use the + * MPI interface to write the PHY firmware. Once done, we issue an + * MBOA Reset, which will force the MAC to reset and reinitialize the + * PHY. If that works, we are ready to go. + * + * Max packet size for the MPI write is 512, so the max buffer is 480 + * (which gives us 160 byte triads of MSB, LSB and VAL for the data). + */ +int i1480_phy_fw_upload(struct i1480 *i1480) +{ + int result; + const struct firmware *fw; + const char *data_itr, *data_top; + const size_t MAX_BLK_SIZE = 480; /* 160 triads */ + size_t data_size; + u8 phy_stat; + + result = request_firmware(&fw, i1480->phy_fw_name, i1480->dev); + if (result < 0) + goto out; + /* Loop writing data in chunks as big as possible until done. */ + for (data_itr = fw->data, data_top = data_itr + fw->size; + data_itr < data_top; data_itr += MAX_BLK_SIZE) { + data_size = min(MAX_BLK_SIZE, (size_t) (data_top - data_itr)); + result = i1480_mpi_write(i1480, data_itr, data_size); + if (result < 0) + goto error_mpi_write; + } + /* Read MPI page 0, offset 6; if 0, PHY was initialized correctly. */ + result = i1480_mpi_read(i1480, &phy_stat, 0x0006, 1); + if (result < 0) { + dev_err(i1480->dev, "PHY: can't get status: %d\n", result); + goto error_mpi_status; + } + if (phy_stat != 0) { + result = -ENODEV; + dev_info(i1480->dev, "error, PHY not ready: %u\n", phy_stat); + goto error_phy_status; + } + dev_info(i1480->dev, "PHY fw '%s': uploaded\n", i1480->phy_fw_name); +error_phy_status: +error_mpi_status: +error_mpi_write: + release_firmware(fw); + if (result < 0) + dev_err(i1480->dev, "PHY fw '%s': failed to upload (%d), " + "power cycle device\n", i1480->phy_fw_name, result); +out: + return result; +} diff --git a/drivers/uwb/i1480/dfu/usb.c b/drivers/uwb/i1480/dfu/usb.c new file mode 100644 index 000000000000..98eeeff051aa --- /dev/null +++ b/drivers/uwb/i1480/dfu/usb.c @@ -0,0 +1,500 @@ +/* + * Intel Wireless UWB Link 1480 + * USB SKU firmware upload implementation + * + * Copyright (C) 2005-2006 Intel Corporation + * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + * + * + * This driver will prepare the i1480 device to behave as a real + * Wireless USB HWA adaptor by uploading the firmware. + * + * When the device is connected or driver is loaded, i1480_usb_probe() + * is called--this will allocate and initialize the device structure, + * fill in the pointers to the common functions (read, write, + * wait_init_done and cmd for HWA command execution) and once that is + * done, call the common firmware uploading routine. Then clean up and + * return -ENODEV, as we don't attach to the device. + * + * The rest are the basic ops we implement that the fw upload code + * uses to do its job. All the ops in the common code are i1480->NAME, + * the functions are i1480_usb_NAME(). + */ +#include <linux/module.h> +#include <linux/version.h> +#include <linux/usb.h> +#include <linux/interrupt.h> +#include <linux/delay.h> +#include <linux/uwb.h> +#include <linux/usb/wusb.h> +#include <linux/usb/wusb-wa.h> +#include "i1480-dfu.h" + +#define D_LOCAL 0 +#include <linux/uwb/debug.h> + + +struct i1480_usb { + struct i1480 i1480; + struct usb_device *usb_dev; + struct usb_interface *usb_iface; + struct urb *neep_urb; /* URB for reading from EP1 */ +}; + + +static +void i1480_usb_init(struct i1480_usb *i1480_usb) +{ + i1480_init(&i1480_usb->i1480); +} + + +static +int i1480_usb_create(struct i1480_usb *i1480_usb, struct usb_interface *iface) +{ + struct usb_device *usb_dev = interface_to_usbdev(iface); + int result = -ENOMEM; + + i1480_usb->usb_dev = usb_get_dev(usb_dev); /* bind the USB device */ + i1480_usb->usb_iface = usb_get_intf(iface); + usb_set_intfdata(iface, i1480_usb); /* Bind the driver to iface0 */ + i1480_usb->neep_urb = usb_alloc_urb(0, GFP_KERNEL); + if (i1480_usb->neep_urb == NULL) + goto error; + return 0; + +error: + usb_set_intfdata(iface, NULL); + usb_put_intf(iface); + usb_put_dev(usb_dev); + return result; +} + + +static +void i1480_usb_destroy(struct i1480_usb *i1480_usb) +{ + usb_kill_urb(i1480_usb->neep_urb); + usb_free_urb(i1480_usb->neep_urb); + usb_set_intfdata(i1480_usb->usb_iface, NULL); + usb_put_intf(i1480_usb->usb_iface); + usb_put_dev(i1480_usb->usb_dev); +} + + +/** + * Write a buffer to a memory address in the i1480 device + * + * @i1480: i1480 instance + * @memory_address: + * Address where to write the data buffer to. + * @buffer: Buffer to the data + * @size: Size of the buffer [has to be < 512]. + * @returns: 0 if ok, < 0 errno code on error. + * + * Data buffers to USB cannot be on the stack or in vmalloc'ed areas, + * so we copy it to the local i1480 buffer before proceeding. In any + * case, we have a max size we can send, soooo. + */ +static +int i1480_usb_write(struct i1480 *i1480, u32 memory_address, + const void *buffer, size_t size) +{ + int result = 0; + struct i1480_usb *i1480_usb = container_of(i1480, struct i1480_usb, i1480); + size_t buffer_size, itr = 0; + + d_fnstart(3, i1480->dev, "(%p, 0x%08x, %p, %zu)\n", + i1480, memory_address, buffer, size); + BUG_ON(size & 0x3); /* Needs to be a multiple of 4 */ + while (size > 0) { + buffer_size = size < i1480->buf_size ? size : i1480->buf_size; + memcpy(i1480->cmd_buf, buffer + itr, buffer_size); + result = usb_control_msg( + i1480_usb->usb_dev, usb_sndctrlpipe(i1480_usb->usb_dev, 0), + 0xf0, USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, + cpu_to_le16(memory_address & 0xffff), + cpu_to_le16((memory_address >> 16) & 0xffff), + i1480->cmd_buf, buffer_size, 100 /* FIXME: arbitrary */); + if (result < 0) + break; + d_printf(3, i1480->dev, + "wrote @ 0x%08x %u bytes (of %zu bytes requested)\n", + memory_address, result, buffer_size); + d_dump(4, i1480->dev, i1480->cmd_buf, result); + itr += result; + memory_address += result; + size -= result; + } + d_fnend(3, i1480->dev, "(%p, 0x%08x, %p, %zu) = %d\n", + i1480, memory_address, buffer, size, result); + return result; +} + + +/** + * Read a block [max size 512] of the device's memory to @i1480's buffer. + * + * @i1480: i1480 instance + * @memory_address: + * Address where to read from. + * @size: Size to read. Smaller than or equal to 512. + * @returns: >= 0 number of bytes written if ok, < 0 errno code on error. + * + * NOTE: if the memory address or block is incorrect, you might get a + * stall or a different memory read. Caller has to verify the + * memory address and size passed back in the @neh structure. + */ +static +int i1480_usb_read(struct i1480 *i1480, u32 addr, size_t size) +{ + ssize_t result = 0, bytes = 0; + size_t itr, read_size = i1480->buf_size; + struct i1480_usb *i1480_usb = container_of(i1480, struct i1480_usb, i1480); + + d_fnstart(3, i1480->dev, "(%p, 0x%08x, %zu)\n", + i1480, addr, size); + BUG_ON(size > i1480->buf_size); + BUG_ON(size & 0x3); /* Needs to be a multiple of 4 */ + BUG_ON(read_size > 512); + + if (addr >= 0x8000d200 && addr < 0x8000d400) /* Yeah, HW quirk */ + read_size = 4; + + for (itr = 0; itr < size; itr += read_size) { + size_t itr_addr = addr + itr; + size_t itr_size = min(read_size, size - itr); + result = usb_control_msg( + i1480_usb->usb_dev, usb_rcvctrlpipe(i1480_usb->usb_dev, 0), + 0xf0, USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE, + cpu_to_le16(itr_addr & 0xffff), + cpu_to_le16((itr_addr >> 16) & 0xffff), + i1480->cmd_buf + itr, itr_size, + 100 /* FIXME: arbitrary */); + if (result < 0) { + dev_err(i1480->dev, "%s: USB read error: %zd\n", + __func__, result); + goto out; + } + if (result != itr_size) { + result = -EIO; + dev_err(i1480->dev, + "%s: partial read got only %zu bytes vs %zu expected\n", + __func__, result, itr_size); + goto out; + } + bytes += result; + } + result = bytes; +out: + d_fnend(3, i1480->dev, "(%p, 0x%08x, %zu) = %zd\n", + i1480, addr, size, result); + if (result > 0) + d_dump(4, i1480->dev, i1480->cmd_buf, result); + return result; +} + + +/** + * Callback for reads on the notification/event endpoint + * + * Just enables the completion read handler. + */ +static +void i1480_usb_neep_cb(struct urb *urb) +{ + struct i1480 *i1480 = urb->context; + struct device *dev = i1480->dev; + + switch (urb->status) { + case 0: + break; + case -ECONNRESET: /* Not an error, but a controlled situation; */ + case -ENOENT: /* (we killed the URB)...so, no broadcast */ + dev_dbg(dev, "NEEP: reset/noent %d\n", urb->status); + break; + case -ESHUTDOWN: /* going away! */ + dev_dbg(dev, "NEEP: down %d\n", urb->status); + break; + default: + dev_err(dev, "NEEP: unknown status %d\n", urb->status); + break; + } + i1480->evt_result = urb->actual_length; + complete(&i1480->evt_complete); + return; +} + + +/** + * Wait for the MAC FW to initialize + * + * MAC FW sends a 0xfd/0101/00 notification to EP1 when done + * initializing. Get that notification into i1480->evt_buf; upper layer + * will verify it. + * + * Set i1480->evt_result with the result of getting the event or its + * size (if succesful). + * + * Delivers the data directly to i1480->evt_buf + */ +static +int i1480_usb_wait_init_done(struct i1480 *i1480) +{ + int result; + struct device *dev = i1480->dev; + struct i1480_usb *i1480_usb = container_of(i1480, struct i1480_usb, i1480); + struct usb_endpoint_descriptor *epd; + + d_fnstart(3, dev, "(%p)\n", i1480); + init_completion(&i1480->evt_complete); + i1480->evt_result = -EINPROGRESS; + epd = &i1480_usb->usb_iface->cur_altsetting->endpoint[0].desc; + usb_fill_int_urb(i1480_usb->neep_urb, i1480_usb->usb_dev, + usb_rcvintpipe(i1480_usb->usb_dev, epd->bEndpointAddress), + i1480->evt_buf, i1480->buf_size, + i1480_usb_neep_cb, i1480, epd->bInterval); + result = usb_submit_urb(i1480_usb->neep_urb, GFP_KERNEL); + if (result < 0) { + dev_err(dev, "init done: cannot submit NEEP read: %d\n", + result); + goto error_submit; + } + /* Wait for the USB callback to get the data */ + result = wait_for_completion_interruptible_timeout( + &i1480->evt_complete, HZ); + if (result <= 0) { + result = result == 0 ? -ETIMEDOUT : result; + goto error_wait; + } + usb_kill_urb(i1480_usb->neep_urb); + d_fnend(3, dev, "(%p) = 0\n", i1480); + return 0; + +error_wait: + usb_kill_urb(i1480_usb->neep_urb); +error_submit: + i1480->evt_result = result; + d_fnend(3, dev, "(%p) = %d\n", i1480, result); + return result; +} + + +/** + * Generic function for issuing commands to the i1480 + * + * @i1480: i1480 instance + * @cmd_name: Name of the command (for error messages) + * @cmd: Pointer to command buffer + * @cmd_size: Size of the command buffer + * @reply: Buffer for the reply event + * @reply_size: Expected size back (including RCEB); the reply buffer + * is assumed to be as big as this. + * @returns: >= 0 size of the returned event data if ok, + * < 0 errno code on error. + * + * Arms the NE handle, issues the command to the device and checks the + * basics of the reply event. + */ +static +int i1480_usb_cmd(struct i1480 *i1480, const char *cmd_name, size_t cmd_size) +{ + int result; + struct device *dev = i1480->dev; + struct i1480_usb *i1480_usb = container_of(i1480, struct i1480_usb, i1480); + struct usb_endpoint_descriptor *epd; + struct uwb_rccb *cmd = i1480->cmd_buf; + u8 iface_no; + + d_fnstart(3, dev, "(%p, %s, %zu)\n", i1480, cmd_name, cmd_size); + /* Post a read on the notification & event endpoint */ + iface_no = i1480_usb->usb_iface->cur_altsetting->desc.bInterfaceNumber; + epd = &i1480_usb->usb_iface->cur_altsetting->endpoint[0].desc; + usb_fill_int_urb( + i1480_usb->neep_urb, i1480_usb->usb_dev, + usb_rcvintpipe(i1480_usb->usb_dev, epd->bEndpointAddress), + i1480->evt_buf, i1480->buf_size, + i1480_usb_neep_cb, i1480, epd->bInterval); + result = usb_submit_urb(i1480_usb->neep_urb, GFP_KERNEL); + if (result < 0) { + dev_err(dev, "%s: cannot submit NEEP read: %d\n", + cmd_name, result); + goto error_submit_ep1; + } + /* Now post the command on EP0 */ + result = usb_control_msg( + i1480_usb->usb_dev, usb_sndctrlpipe(i1480_usb->usb_dev, 0), + WA_EXEC_RC_CMD, + USB_DIR_OUT | USB_RECIP_INTERFACE | USB_TYPE_CLASS, + 0, iface_no, + cmd, cmd_size, + 100 /* FIXME: this is totally arbitrary */); + if (result < 0) { + dev_err(dev, "%s: control request failed: %d\n", + cmd_name, result); + goto error_submit_ep0; + } + d_fnend(3, dev, "(%p, %s, %zu) = %d\n", + i1480, cmd_name, cmd_size, result); + return result; + +error_submit_ep0: + usb_kill_urb(i1480_usb->neep_urb); +error_submit_ep1: + d_fnend(3, dev, "(%p, %s, %zu) = %d\n", + i1480, cmd_name, cmd_size, result); + return result; +} + + +/* + * Probe a i1480 device for uploading firmware. + * + * We attach only to interface #0, which is the radio control interface. + */ +static +int i1480_usb_probe(struct usb_interface *iface, const struct usb_device_id *id) +{ + struct i1480_usb *i1480_usb; + struct i1480 *i1480; + struct device *dev = &iface->dev; + int result; + + result = -ENODEV; + if (iface->cur_altsetting->desc.bInterfaceNumber != 0) { + dev_dbg(dev, "not attaching to iface %d\n", + iface->cur_altsetting->desc.bInterfaceNumber); + goto error; + } + if (iface->num_altsetting > 1 + && interface_to_usbdev(iface)->descriptor.idProduct == 0xbabe) { + /* Need altsetting #1 [HW QUIRK] or EP1 won't work */ + result = usb_set_interface(interface_to_usbdev(iface), 0, 1); + if (result < 0) + dev_warn(dev, + "can't set altsetting 1 on iface 0: %d\n", + result); + } + + result = -ENOMEM; + i1480_usb = kzalloc(sizeof(*i1480_usb), GFP_KERNEL); + if (i1480_usb == NULL) { + dev_err(dev, "Unable to allocate instance\n"); + goto error; + } + i1480_usb_init(i1480_usb); + + i1480 = &i1480_usb->i1480; + i1480->buf_size = 512; + i1480->cmd_buf = kmalloc(2 * i1480->buf_size, GFP_KERNEL); + if (i1480->cmd_buf == NULL) { + dev_err(dev, "Cannot allocate transfer buffers\n"); + result = -ENOMEM; + goto error_buf_alloc; + } + i1480->evt_buf = i1480->cmd_buf + i1480->buf_size; + + result = i1480_usb_create(i1480_usb, iface); + if (result < 0) { + dev_err(dev, "Cannot create instance: %d\n", result); + goto error_create; + } + + /* setup the fops and upload the firmare */ + i1480->pre_fw_name = "i1480-pre-phy-0.0.bin"; + i1480->mac_fw_name = "i1480-usb-0.0.bin"; + i1480->mac_fw_name_deprecate = "ptc-0.0.bin"; + i1480->phy_fw_name = "i1480-phy-0.0.bin"; + i1480->dev = &iface->dev; + i1480->write = i1480_usb_write; + i1480->read = i1480_usb_read; + i1480->rc_setup = NULL; + i1480->wait_init_done = i1480_usb_wait_init_done; + i1480->cmd = i1480_usb_cmd; + + result = i1480_fw_upload(&i1480_usb->i1480); /* the real thing */ + if (result >= 0) { + usb_reset_device(i1480_usb->usb_dev); + result = -ENODEV; /* we don't want to bind to the iface */ + } + i1480_usb_destroy(i1480_usb); +error_create: + kfree(i1480->cmd_buf); +error_buf_alloc: + kfree(i1480_usb); +error: + return result; +} + +#define i1480_USB_DEV(v, p) \ +{ \ + .match_flags = USB_DEVICE_ID_MATCH_DEVICE \ + | USB_DEVICE_ID_MATCH_DEV_INFO \ + | USB_DEVICE_ID_MATCH_INT_INFO, \ + .idVendor = (v), \ + .idProduct = (p), \ + .bDeviceClass = 0xff, \ + .bDeviceSubClass = 0xff, \ + .bDeviceProtocol = 0xff, \ + .bInterfaceClass = 0xff, \ + .bInterfaceSubClass = 0xff, \ + .bInterfaceProtocol = 0xff, \ +} + + +/** USB device ID's that we handle */ +static struct usb_device_id i1480_usb_id_table[] = { + i1480_USB_DEV(0x8086, 0xdf3b), + i1480_USB_DEV(0x15a9, 0x0005), + i1480_USB_DEV(0x07d1, 0x3802), + i1480_USB_DEV(0x050d, 0x305a), + i1480_USB_DEV(0x3495, 0x3007), + {}, +}; +MODULE_DEVICE_TABLE(usb, i1480_usb_id_table); + + +static struct usb_driver i1480_dfu_driver = { + .name = "i1480-dfu-usb", + .id_table = i1480_usb_id_table, + .probe = i1480_usb_probe, + .disconnect = NULL, +}; + + +/* + * Initialize the i1480 DFU driver. + * + * We also need to register our function for guessing event sizes. + */ +static int __init i1480_dfu_driver_init(void) +{ + return usb_register(&i1480_dfu_driver); +} +module_init(i1480_dfu_driver_init); + + +static void __exit i1480_dfu_driver_exit(void) +{ + usb_deregister(&i1480_dfu_driver); +} +module_exit(i1480_dfu_driver_exit); + + +MODULE_AUTHOR("Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>"); +MODULE_DESCRIPTION("Intel Wireless UWB Link 1480 firmware uploader for USB"); +MODULE_LICENSE("GPL"); diff --git a/drivers/uwb/i1480/i1480-est.c b/drivers/uwb/i1480/i1480-est.c new file mode 100644 index 000000000000..7bf8c6febae7 --- /dev/null +++ b/drivers/uwb/i1480/i1480-est.c @@ -0,0 +1,99 @@ +/* + * Intel Wireless UWB Link 1480 + * Event Size tables for Wired Adaptors + * + * Copyright (C) 2005-2006 Intel Corporation + * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + * + * + * FIXME: docs + */ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/usb.h> +#include <linux/uwb.h> +#include "dfu/i1480-dfu.h" + + +/** Event size table for wEvents 0x00XX */ +static struct uwb_est_entry i1480_est_fd00[] = { + /* Anybody expecting this response has to use + * neh->extra_size to specify the real size that will + * come back. */ + [i1480_EVT_CONFIRM] = { .size = sizeof(struct i1480_evt_confirm) }, + [i1480_CMD_SET_IP_MAS] = { .size = sizeof(struct i1480_evt_confirm) }, +#ifdef i1480_RCEB_EXTENDED + [0x09] = { + .size = sizeof(struct i1480_rceb), + .offset = 1 + offsetof(struct i1480_rceb, wParamLength), + }, +#endif +}; + +/** Event size table for wEvents 0x01XX */ +static struct uwb_est_entry i1480_est_fd01[] = { + [0xff & i1480_EVT_RM_INIT_DONE] = { .size = sizeof(struct i1480_rceb) }, + [0xff & i1480_EVT_DEV_ADD] = { .size = sizeof(struct i1480_rceb) + 9 }, + [0xff & i1480_EVT_DEV_RM] = { .size = sizeof(struct i1480_rceb) + 9 }, + [0xff & i1480_EVT_DEV_ID_CHANGE] = { + .size = sizeof(struct i1480_rceb) + 2 }, +}; + +static int i1480_est_init(void) +{ + int result = uwb_est_register(i1480_CET_VS1, 0x00, 0x8086, 0x0c3b, + i1480_est_fd00, + ARRAY_SIZE(i1480_est_fd00)); + if (result < 0) { + printk(KERN_ERR "Can't register EST table fd00: %d\n", result); + return result; + } + result = uwb_est_register(i1480_CET_VS1, 0x01, 0x8086, 0x0c3b, + i1480_est_fd01, ARRAY_SIZE(i1480_est_fd01)); + if (result < 0) { + printk(KERN_ERR "Can't register EST table fd01: %d\n", result); + return result; + } + return 0; +} +module_init(i1480_est_init); + +static void i1480_est_exit(void) +{ + uwb_est_unregister(i1480_CET_VS1, 0x00, 0x8086, 0x0c3b, + i1480_est_fd00, ARRAY_SIZE(i1480_est_fd00)); + uwb_est_unregister(i1480_CET_VS1, 0x01, 0x8086, 0x0c3b, + i1480_est_fd01, ARRAY_SIZE(i1480_est_fd01)); +} +module_exit(i1480_est_exit); + +MODULE_AUTHOR("Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>"); +MODULE_DESCRIPTION("i1480's Vendor Specific Event Size Tables"); +MODULE_LICENSE("GPL"); + +/** + * USB device ID's that we handle + * + * [so we are loaded when this kind device is connected] + */ +static struct usb_device_id i1480_est_id_table[] = { + { USB_DEVICE(0x8086, 0xdf3b), }, + { USB_DEVICE(0x8086, 0x0c3b), }, + { }, +}; +MODULE_DEVICE_TABLE(usb, i1480_est_id_table); diff --git a/drivers/uwb/i1480/i1480-wlp.h b/drivers/uwb/i1480/i1480-wlp.h new file mode 100644 index 000000000000..18a8b0e4567b --- /dev/null +++ b/drivers/uwb/i1480/i1480-wlp.h @@ -0,0 +1,200 @@ +/* + * Intel 1480 Wireless UWB Link + * WLP specific definitions + * + * + * Copyright (C) 2005-2006 Intel Corporation + * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + * + * + * FIXME: docs + */ + +#ifndef __i1480_wlp_h__ +#define __i1480_wlp_h__ + +#include <linux/spinlock.h> +#include <linux/list.h> +#include <linux/uwb.h> +#include <linux/if_ether.h> +#include <asm/byteorder.h> + +/* New simplified header format? */ +#undef WLP_HDR_FMT_2 /* FIXME: rename */ + +/** + * Values of the Delivery ID & Type field when PCA or DRP + * + * The Delivery ID & Type field in the WLP TX header indicates whether + * the frame is PCA or DRP. This is done based on the high level bit of + * this field. + * We use this constant to test if the traffic is PCA or DRP as follows: + * if (wlp_tx_hdr_delivery_id_type(wlp_tx_hdr) & WLP_DRP) + * this is DRP traffic + * else + * this is PCA traffic + */ +enum deliver_id_type_bit { + WLP_DRP = 8, +}; + +/** + * WLP TX header + * + * Indicates UWB/WLP-specific transmission parameters for a network + * packet. + */ +struct wlp_tx_hdr { + /* dword 0 */ + struct uwb_dev_addr dstaddr; + u8 key_index; + u8 mac_params; + /* dword 1 */ + u8 phy_params; +#ifndef WLP_HDR_FMT_2 + u8 reserved; + __le16 oui01; /* FIXME: not so sure if __le16 or u8[2] */ + /* dword 2 */ + u8 oui2; /* if all LE, it could be merged */ + __le16 prid; +#endif +} __attribute__((packed)); + +static inline int wlp_tx_hdr_delivery_id_type(const struct wlp_tx_hdr *hdr) +{ + return hdr->mac_params & 0x0f; +} + +static inline int wlp_tx_hdr_ack_policy(const struct wlp_tx_hdr *hdr) +{ + return (hdr->mac_params >> 4) & 0x07; +} + +static inline int wlp_tx_hdr_rts_cts(const struct wlp_tx_hdr *hdr) +{ + return (hdr->mac_params >> 7) & 0x01; +} + +static inline void wlp_tx_hdr_set_delivery_id_type(struct wlp_tx_hdr *hdr, int id) +{ + hdr->mac_params = (hdr->mac_params & ~0x0f) | id; +} + +static inline void wlp_tx_hdr_set_ack_policy(struct wlp_tx_hdr *hdr, + enum uwb_ack_pol policy) +{ + hdr->mac_params = (hdr->mac_params & ~0x70) | (policy << 4); +} + +static inline void wlp_tx_hdr_set_rts_cts(struct wlp_tx_hdr *hdr, int rts_cts) +{ + hdr->mac_params = (hdr->mac_params & ~0x80) | (rts_cts << 7); +} + +static inline enum uwb_phy_rate wlp_tx_hdr_phy_rate(const struct wlp_tx_hdr *hdr) +{ + return hdr->phy_params & 0x0f; +} + +static inline int wlp_tx_hdr_tx_power(const struct wlp_tx_hdr *hdr) +{ + return (hdr->phy_params >> 4) & 0x0f; +} + +static inline void wlp_tx_hdr_set_phy_rate(struct wlp_tx_hdr *hdr, enum uwb_phy_rate rate) +{ + hdr->phy_params = (hdr->phy_params & ~0x0f) | rate; +} + +static inline void wlp_tx_hdr_set_tx_power(struct wlp_tx_hdr *hdr, int pwr) +{ + hdr->phy_params = (hdr->phy_params & ~0xf0) | (pwr << 4); +} + + +/** + * WLP RX header + * + * Provides UWB/WLP-specific transmission data for a received + * network packet. + */ +struct wlp_rx_hdr { + /* dword 0 */ + struct uwb_dev_addr dstaddr; + struct uwb_dev_addr srcaddr; + /* dword 1 */ + u8 LQI; + s8 RSSI; + u8 reserved3; +#ifndef WLP_HDR_FMT_2 + u8 oui0; + /* dword 2 */ + __le16 oui12; + __le16 prid; +#endif +} __attribute__((packed)); + + +/** User configurable options for WLP */ +struct wlp_options { + struct mutex mutex; /* access to user configurable options*/ + struct wlp_tx_hdr def_tx_hdr; /* default tx hdr */ + u8 pca_base_priority; + u8 bw_alloc; /*index into bw_allocs[] for PCA/DRP reservations*/ +}; + + +static inline +void wlp_options_init(struct wlp_options *options) +{ + mutex_init(&options->mutex); + wlp_tx_hdr_set_ack_policy(&options->def_tx_hdr, UWB_ACK_INM); + wlp_tx_hdr_set_rts_cts(&options->def_tx_hdr, 1); + /* FIXME: default to phy caps */ + wlp_tx_hdr_set_phy_rate(&options->def_tx_hdr, UWB_PHY_RATE_480); +#ifndef WLP_HDR_FMT_2 + options->def_tx_hdr.prid = cpu_to_le16(0x0000); +#endif +} + + +/* sysfs helpers */ + +extern ssize_t uwb_pca_base_priority_store(struct wlp_options *, + const char *, size_t); +extern ssize_t uwb_pca_base_priority_show(const struct wlp_options *, char *); +extern ssize_t uwb_bw_alloc_store(struct wlp_options *, const char *, size_t); +extern ssize_t uwb_bw_alloc_show(const struct wlp_options *, char *); +extern ssize_t uwb_ack_policy_store(struct wlp_options *, + const char *, size_t); +extern ssize_t uwb_ack_policy_show(const struct wlp_options *, char *); +extern ssize_t uwb_rts_cts_store(struct wlp_options *, const char *, size_t); +extern ssize_t uwb_rts_cts_show(const struct wlp_options *, char *); +extern ssize_t uwb_phy_rate_store(struct wlp_options *, const char *, size_t); +extern ssize_t uwb_phy_rate_show(const struct wlp_options *, char *); + + +/** Simple bandwidth allocation (temporary and too simple) */ +struct wlp_bw_allocs { + const char *name; + struct { + u8 mask, stream; + } tx, rx; +}; + + +#endif /* #ifndef __i1480_wlp_h__ */ diff --git a/drivers/uwb/i1480/i1480u-wlp/Makefile b/drivers/uwb/i1480/i1480u-wlp/Makefile new file mode 100644 index 000000000000..fe6709b8e68b --- /dev/null +++ b/drivers/uwb/i1480/i1480u-wlp/Makefile @@ -0,0 +1,8 @@ +obj-$(CONFIG_UWB_I1480U_WLP) += i1480u-wlp.o + +i1480u-wlp-objs := \ + lc.o \ + netdev.o \ + rx.o \ + sysfs.o \ + tx.o diff --git a/drivers/uwb/i1480/i1480u-wlp/i1480u-wlp.h b/drivers/uwb/i1480/i1480u-wlp/i1480u-wlp.h new file mode 100644 index 000000000000..5f1b2951bb83 --- /dev/null +++ b/drivers/uwb/i1480/i1480u-wlp/i1480u-wlp.h @@ -0,0 +1,284 @@ +/* + * Intel 1480 Wireless UWB Link USB + * Header formats, constants, general internal interfaces + * + * + * Copyright (C) 2005-2006 Intel Corporation + * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + * + * + * This is not an standard interface. + * + * FIXME: docs + * + * i1480u-wlp is pretty simple: two endpoints, one for tx, one for + * rx. rx is polled. Network packets (ethernet, whatever) are wrapped + * in i1480 TX or RX headers (for sending over the air), and these + * packets are wrapped in UNTD headers (for sending to the WLP UWB + * controller). + * + * UNTD packets (UNTD hdr + i1480 hdr + network packet) packets + * cannot be bigger than i1480u_MAX_FRG_SIZE. When this happens, the + * i1480 packet is broken in chunks/packets: + * + * UNTD-1st.hdr + i1480.hdr + payload + * UNTD-next.hdr + payload + * ... + * UNTD-last.hdr + payload + * + * so that each packet is smaller or equal than i1480u_MAX_FRG_SIZE. + * + * All HW structures and bitmaps are little endian, so we need to play + * ugly tricks when defining bitfields. Hoping for the day GCC + * implements __attribute__((endian(1234))). + * + * FIXME: ROADMAP to the whole implementation + */ + +#ifndef __i1480u_wlp_h__ +#define __i1480u_wlp_h__ + +#include <linux/usb.h> +#include <linux/netdevice.h> +#include <linux/uwb.h> /* struct uwb_rc, struct uwb_notifs_handler */ +#include <linux/wlp.h> +#include "../i1480-wlp.h" + +#undef i1480u_FLOW_CONTROL /* Enable flow control code */ + +/** + * Basic flow control + */ +enum { + i1480u_TX_INFLIGHT_MAX = 1000, + i1480u_TX_INFLIGHT_THRESHOLD = 100, +}; + +/** Maximum size of a transaction that we can tx/rx */ +enum { + /* Maximum packet size computed as follows: max UNTD header (8) + + * i1480 RX header (8) + max Ethernet header and payload (4096) + + * Padding added by skb_reserve (2) to make post Ethernet payload + * start on 16 byte boundary*/ + i1480u_MAX_RX_PKT_SIZE = 4114, + i1480u_MAX_FRG_SIZE = 512, + i1480u_RX_BUFS = 9, +}; + + +/** + * UNTD packet type + * + * We need to fragment any payload whose UNTD packet is going to be + * bigger than i1480u_MAX_FRG_SIZE. + */ +enum i1480u_pkt_type { + i1480u_PKT_FRAG_1ST = 0x1, + i1480u_PKT_FRAG_NXT = 0x0, + i1480u_PKT_FRAG_LST = 0x2, + i1480u_PKT_FRAG_CMP = 0x3 +}; +enum { + i1480u_PKT_NONE = 0x4, +}; + +/** USB Network Transfer Descriptor - common */ +struct untd_hdr { + u8 type; + __le16 len; +} __attribute__((packed)); + +static inline enum i1480u_pkt_type untd_hdr_type(const struct untd_hdr *hdr) +{ + return hdr->type & 0x03; +} + +static inline int untd_hdr_rx_tx(const struct untd_hdr *hdr) +{ + return (hdr->type >> 2) & 0x01; +} + +static inline void untd_hdr_set_type(struct untd_hdr *hdr, enum i1480u_pkt_type type) +{ + hdr->type = (hdr->type & ~0x03) | type; +} + +static inline void untd_hdr_set_rx_tx(struct untd_hdr *hdr, int rx_tx) +{ + hdr->type = (hdr->type & ~0x04) | (rx_tx << 2); +} + + +/** + * USB Network Transfer Descriptor - Complete Packet + * + * This is for a packet that is smaller (header + payload) than + * i1480u_MAX_FRG_SIZE. + * + * @hdr.total_len is the size of the payload; the payload doesn't + * count this header nor the padding, but includes the size of i1480 + * header. + */ +struct untd_hdr_cmp { + struct untd_hdr hdr; + u8 padding; +} __attribute__((packed)); + + +/** + * USB Network Transfer Descriptor - First fragment + * + * @hdr.len is the size of the *whole packet* (excluding UNTD + * headers); @fragment_len is the size of the payload (excluding UNTD + * headers, but including i1480 headers). + */ +struct untd_hdr_1st { + struct untd_hdr hdr; + __le16 fragment_len; + u8 padding[3]; +} __attribute__((packed)); + + +/** + * USB Network Transfer Descriptor - Next / Last [Rest] + * + * @hdr.len is the size of the payload, not including headrs. + */ +struct untd_hdr_rst { + struct untd_hdr hdr; + u8 padding; +} __attribute__((packed)); + + +/** + * Transmission context + * + * Wraps all the stuff needed to track a pending/active tx + * operation. + */ +struct i1480u_tx { + struct list_head list_node; + struct i1480u *i1480u; + struct urb *urb; + + struct sk_buff *skb; + struct wlp_tx_hdr *wlp_tx_hdr; + + void *buf; /* if NULL, no new buf was used */ + size_t buf_size; +}; + +/** + * Basic flow control + * + * We maintain a basic flow control counter. "count" how many TX URBs are + * outstanding. Only allow "max" + * TX URBs to be outstanding. If this value is reached the queue will be + * stopped. The queue will be restarted when there are + * "threshold" URBs outstanding. + * Maintain a counter of how many time the TX queue needed to be restarted + * due to the "max" being exceeded and the "threshold" reached again. The + * timestamp "restart_ts" is to keep track from when the counter was last + * queried (see sysfs handling of file wlp_tx_inflight). + */ +struct i1480u_tx_inflight { + atomic_t count; + unsigned long max; + unsigned long threshold; + unsigned long restart_ts; + atomic_t restart_count; +}; + +/** + * Instance of a i1480u WLP interface + * + * Keeps references to the USB device that wraps it, as well as it's + * interface and associated UWB host controller. As well, it also + * keeps a link to the netdevice for integration into the networking + * stack. + * We maintian separate error history for the tx and rx endpoints because + * the implementation does not rely on locking - having one shared + * structure between endpoints may cause problems. Adding locking to the + * implementation will have higher cost than adding a separate structure. + */ +struct i1480u { + struct usb_device *usb_dev; + struct usb_interface *usb_iface; + struct net_device *net_dev; + + spinlock_t lock; + struct net_device_stats stats; + + /* RX context handling */ + struct sk_buff *rx_skb; + struct uwb_dev_addr rx_srcaddr; + size_t rx_untd_pkt_size; + struct i1480u_rx_buf { + struct i1480u *i1480u; /* back pointer */ + struct urb *urb; + struct sk_buff *data; /* i1480u_MAX_RX_PKT_SIZE each */ + } rx_buf[i1480u_RX_BUFS]; /* N bufs */ + + spinlock_t tx_list_lock; /* TX context */ + struct list_head tx_list; + u8 tx_stream; + + struct stats lqe_stats, rssi_stats; /* radio statistics */ + + /* Options we can set from sysfs */ + struct wlp_options options; + struct uwb_notifs_handler uwb_notifs_handler; + struct edc tx_errors; + struct edc rx_errors; + struct wlp wlp; +#ifdef i1480u_FLOW_CONTROL + struct urb *notif_urb; + struct edc notif_edc; /* error density counter */ + u8 notif_buffer[1]; +#endif + struct i1480u_tx_inflight tx_inflight; +}; + +/* Internal interfaces */ +extern void i1480u_rx_cb(struct urb *urb); +extern int i1480u_rx_setup(struct i1480u *); +extern void i1480u_rx_release(struct i1480u *); +extern void i1480u_tx_release(struct i1480u *); +extern int i1480u_xmit_frame(struct wlp *, struct sk_buff *, + struct uwb_dev_addr *); +extern void i1480u_stop_queue(struct wlp *); +extern void i1480u_start_queue(struct wlp *); +extern int i1480u_sysfs_setup(struct i1480u *); +extern void i1480u_sysfs_release(struct i1480u *); + +/* netdev interface */ +extern int i1480u_open(struct net_device *); +extern int i1480u_stop(struct net_device *); +extern int i1480u_hard_start_xmit(struct sk_buff *, struct net_device *); +extern void i1480u_tx_timeout(struct net_device *); +extern int i1480u_set_config(struct net_device *, struct ifmap *); +extern struct net_device_stats *i1480u_get_stats(struct net_device *); +extern int i1480u_change_mtu(struct net_device *, int); +extern void i1480u_uwb_notifs_cb(void *, struct uwb_dev *, enum uwb_notifs); + +/* bandwidth allocation callback */ +extern void i1480u_bw_alloc_cb(struct uwb_rsv *); + +/* Sys FS */ +extern struct attribute_group i1480u_wlp_attr_group; + +#endif /* #ifndef __i1480u_wlp_h__ */ diff --git a/drivers/uwb/i1480/i1480u-wlp/lc.c b/drivers/uwb/i1480/i1480u-wlp/lc.c new file mode 100644 index 000000000000..737d60cd5b73 --- /dev/null +++ b/drivers/uwb/i1480/i1480u-wlp/lc.c @@ -0,0 +1,421 @@ +/* + * WUSB Wire Adapter: WLP interface + * Driver for the Linux Network stack. + * + * Copyright (C) 2005-2006 Intel Corporation + * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + * + * + * FIXME: docs + * + * This implements a very simple network driver for the WLP USB + * device that is associated to a UWB (Ultra Wide Band) host. + * + * This is seen as an interface of a composite device. Once the UWB + * host has an association to another WLP capable device, the + * networking interface (aka WLP) can start to send packets back and + * forth. + * + * Limitations: + * + * - Hand cranked; can't ifup the interface until there is an association + * + * - BW allocation very simplistic [see i1480u_mas_set() and callees]. + * + * + * ROADMAP: + * + * ENTRY POINTS (driver model): + * + * i1480u_driver_{exit,init}(): initialization of the driver. + * + * i1480u_probe(): called by the driver code when a device + * matching 'i1480u_id_table' is connected. + * + * This allocs a netdev instance, inits with + * i1480u_add(), then registers_netdev(). + * i1480u_init() + * i1480u_add() + * + * i1480u_disconnect(): device has been disconnected/module + * is being removed. + * i1480u_rm() + */ +#include <linux/version.h> +#include <linux/if_arp.h> +#include <linux/etherdevice.h> +#include <linux/uwb/debug.h> +#include "i1480u-wlp.h" + + + +static inline +void i1480u_init(struct i1480u *i1480u) +{ + /* nothing so far... doesn't it suck? */ + spin_lock_init(&i1480u->lock); + INIT_LIST_HEAD(&i1480u->tx_list); + spin_lock_init(&i1480u->tx_list_lock); + wlp_options_init(&i1480u->options); + edc_init(&i1480u->tx_errors); + edc_init(&i1480u->rx_errors); +#ifdef i1480u_FLOW_CONTROL + edc_init(&i1480u->notif_edc); +#endif + stats_init(&i1480u->lqe_stats); + stats_init(&i1480u->rssi_stats); + wlp_init(&i1480u->wlp); +} + +/** + * Fill WLP device information structure + * + * The structure will contain a few character arrays, each ending with a + * null terminated string. Each string has to fit (excluding terminating + * character) into a specified range obtained from the WLP substack. + * + * It is still not clear exactly how this device information should be + * obtained. Until we find out we use the USB device descriptor as backup, some + * information elements have intuitive mappings, other not. + */ +static +void i1480u_fill_device_info(struct wlp *wlp, struct wlp_device_info *dev_info) +{ + struct i1480u *i1480u = container_of(wlp, struct i1480u, wlp); + struct usb_device *usb_dev = i1480u->usb_dev; + /* Treat device name and model name the same */ + if (usb_dev->descriptor.iProduct) { + usb_string(usb_dev, usb_dev->descriptor.iProduct, + dev_info->name, sizeof(dev_info->name)); + usb_string(usb_dev, usb_dev->descriptor.iProduct, + dev_info->model_name, sizeof(dev_info->model_name)); + } + if (usb_dev->descriptor.iManufacturer) + usb_string(usb_dev, usb_dev->descriptor.iManufacturer, + dev_info->manufacturer, + sizeof(dev_info->manufacturer)); + scnprintf(dev_info->model_nr, sizeof(dev_info->model_nr), "%04x", + __le16_to_cpu(usb_dev->descriptor.bcdDevice)); + if (usb_dev->descriptor.iSerialNumber) + usb_string(usb_dev, usb_dev->descriptor.iSerialNumber, + dev_info->serial, sizeof(dev_info->serial)); + /* FIXME: where should we obtain category? */ + dev_info->prim_dev_type.category = cpu_to_le16(WLP_DEV_CAT_OTHER); + /* FIXME: Complete OUI and OUIsubdiv attributes */ +} + +#ifdef i1480u_FLOW_CONTROL +/** + * Callback for the notification endpoint + * + * This mostly controls the xon/xoff protocol. In case of hard error, + * we stop the queue. If not, we always retry. + */ +static +void i1480u_notif_cb(struct urb *urb, struct pt_regs *regs) +{ + struct i1480u *i1480u = urb->context; + struct usb_interface *usb_iface = i1480u->usb_iface; + struct device *dev = &usb_iface->dev; + int result; + + switch (urb->status) { + case 0: /* Got valid data, do xon/xoff */ + switch (i1480u->notif_buffer[0]) { + case 'N': + dev_err(dev, "XOFF STOPPING queue at %lu\n", jiffies); + netif_stop_queue(i1480u->net_dev); + break; + case 'A': + dev_err(dev, "XON STARTING queue at %lu\n", jiffies); + netif_start_queue(i1480u->net_dev); + break; + default: + dev_err(dev, "NEP: unknown data 0x%02hhx\n", + i1480u->notif_buffer[0]); + } + break; + case -ECONNRESET: /* Controlled situation ... */ + case -ENOENT: /* we killed the URB... */ + dev_err(dev, "NEP: URB reset/noent %d\n", urb->status); + goto error; + case -ESHUTDOWN: /* going away! */ + dev_err(dev, "NEP: URB down %d\n", urb->status); + goto error; + default: /* Retry unless it gets ugly */ + if (edc_inc(&i1480u->notif_edc, EDC_MAX_ERRORS, + EDC_ERROR_TIMEFRAME)) { + dev_err(dev, "NEP: URB max acceptable errors " + "exceeded; resetting device\n"); + goto error_reset; + } + dev_err(dev, "NEP: URB error %d\n", urb->status); + break; + } + result = usb_submit_urb(urb, GFP_ATOMIC); + if (result < 0) { + dev_err(dev, "NEP: Can't resubmit URB: %d; resetting device\n", + result); + goto error_reset; + } + return; + +error_reset: + wlp_reset_all(&i1480-wlp); +error: + netif_stop_queue(i1480u->net_dev); + return; +} +#endif + +static +int i1480u_add(struct i1480u *i1480u, struct usb_interface *iface) +{ + int result = -ENODEV; + struct wlp *wlp = &i1480u->wlp; + struct usb_device *usb_dev = interface_to_usbdev(iface); + struct net_device *net_dev = i1480u->net_dev; + struct uwb_rc *rc; + struct uwb_dev *uwb_dev; +#ifdef i1480u_FLOW_CONTROL + struct usb_endpoint_descriptor *epd; +#endif + + i1480u->usb_dev = usb_get_dev(usb_dev); + i1480u->usb_iface = iface; + rc = uwb_rc_get_by_grandpa(&i1480u->usb_dev->dev); + if (rc == NULL) { + dev_err(&iface->dev, "Cannot get associated UWB Radio " + "Controller\n"); + goto out; + } + wlp->xmit_frame = i1480u_xmit_frame; + wlp->fill_device_info = i1480u_fill_device_info; + wlp->stop_queue = i1480u_stop_queue; + wlp->start_queue = i1480u_start_queue; + result = wlp_setup(wlp, rc); + if (result < 0) { + dev_err(&iface->dev, "Cannot setup WLP\n"); + goto error_wlp_setup; + } + result = 0; + ether_setup(net_dev); /* make it an etherdevice */ + uwb_dev = &rc->uwb_dev; + /* FIXME: hookup address change notifications? */ + + memcpy(net_dev->dev_addr, uwb_dev->mac_addr.data, + sizeof(net_dev->dev_addr)); + + net_dev->hard_header_len = sizeof(struct untd_hdr_cmp) + + sizeof(struct wlp_tx_hdr) + + WLP_DATA_HLEN + + ETH_HLEN; + net_dev->mtu = 3500; + net_dev->tx_queue_len = 20; /* FIXME: maybe use 1000? */ + +/* net_dev->flags &= ~IFF_BROADCAST; FIXME: BUG in firmware */ + /* FIXME: multicast disabled */ + net_dev->flags &= ~IFF_MULTICAST; + net_dev->features &= ~NETIF_F_SG; + net_dev->features &= ~NETIF_F_FRAGLIST; + /* All NETIF_F_*_CSUM disabled */ + net_dev->features |= NETIF_F_HIGHDMA; + net_dev->watchdog_timeo = 5*HZ; /* FIXME: a better default? */ + + net_dev->open = i1480u_open; + net_dev->stop = i1480u_stop; + net_dev->hard_start_xmit = i1480u_hard_start_xmit; + net_dev->tx_timeout = i1480u_tx_timeout; + net_dev->get_stats = i1480u_get_stats; + net_dev->set_config = i1480u_set_config; + net_dev->change_mtu = i1480u_change_mtu; + +#ifdef i1480u_FLOW_CONTROL + /* Notification endpoint setup (submitted when we open the device) */ + i1480u->notif_urb = usb_alloc_urb(0, GFP_KERNEL); + if (i1480u->notif_urb == NULL) { + dev_err(&iface->dev, "Unable to allocate notification URB\n"); + result = -ENOMEM; + goto error_urb_alloc; + } + epd = &iface->cur_altsetting->endpoint[0].desc; + usb_fill_int_urb(i1480u->notif_urb, usb_dev, + usb_rcvintpipe(usb_dev, epd->bEndpointAddress), + i1480u->notif_buffer, sizeof(i1480u->notif_buffer), + i1480u_notif_cb, i1480u, epd->bInterval); + +#endif + + i1480u->tx_inflight.max = i1480u_TX_INFLIGHT_MAX; + i1480u->tx_inflight.threshold = i1480u_TX_INFLIGHT_THRESHOLD; + i1480u->tx_inflight.restart_ts = jiffies; + usb_set_intfdata(iface, i1480u); + return result; + +#ifdef i1480u_FLOW_CONTROL +error_urb_alloc: +#endif + wlp_remove(wlp); +error_wlp_setup: + uwb_rc_put(rc); +out: + usb_put_dev(i1480u->usb_dev); + return result; +} + +static void i1480u_rm(struct i1480u *i1480u) +{ + struct uwb_rc *rc = i1480u->wlp.rc; + usb_set_intfdata(i1480u->usb_iface, NULL); +#ifdef i1480u_FLOW_CONTROL + usb_kill_urb(i1480u->notif_urb); + usb_free_urb(i1480u->notif_urb); +#endif + wlp_remove(&i1480u->wlp); + uwb_rc_put(rc); + usb_put_dev(i1480u->usb_dev); +} + +/** Just setup @net_dev's i1480u private data */ +static void i1480u_netdev_setup(struct net_device *net_dev) +{ + struct i1480u *i1480u = netdev_priv(net_dev); + /* Initialize @i1480u */ + memset(i1480u, 0, sizeof(*i1480u)); + i1480u_init(i1480u); +} + +/** + * Probe a i1480u interface and register it + * + * @iface: USB interface to link to + * @id: USB class/subclass/protocol id + * @returns: 0 if ok, < 0 errno code on error. + * + * Does basic housekeeping stuff and then allocs a netdev with space + * for the i1480u data. Initializes, registers in i1480u, registers in + * netdev, ready to go. + */ +static int i1480u_probe(struct usb_interface *iface, + const struct usb_device_id *id) +{ + int result; + struct net_device *net_dev; + struct device *dev = &iface->dev; + struct i1480u *i1480u; + + /* Allocate instance [calls i1480u_netdev_setup() on it] */ + result = -ENOMEM; + net_dev = alloc_netdev(sizeof(*i1480u), "wlp%d", i1480u_netdev_setup); + if (net_dev == NULL) { + dev_err(dev, "no memory for network device instance\n"); + goto error_alloc_netdev; + } + SET_NETDEV_DEV(net_dev, dev); + i1480u = netdev_priv(net_dev); + i1480u->net_dev = net_dev; + result = i1480u_add(i1480u, iface); /* Now setup all the wlp stuff */ + if (result < 0) { + dev_err(dev, "cannot add i1480u device: %d\n", result); + goto error_i1480u_add; + } + result = register_netdev(net_dev); /* Okey dokey, bring it up */ + if (result < 0) { + dev_err(dev, "cannot register network device: %d\n", result); + goto error_register_netdev; + } + i1480u_sysfs_setup(i1480u); + if (result < 0) + goto error_sysfs_init; + return 0; + +error_sysfs_init: + unregister_netdev(net_dev); +error_register_netdev: + i1480u_rm(i1480u); +error_i1480u_add: + free_netdev(net_dev); +error_alloc_netdev: + return result; +} + + +/** + * Disconect a i1480u from the system. + * + * i1480u_stop() has been called before, so al the rx and tx contexts + * have been taken down already. Make sure the queue is stopped, + * unregister netdev and i1480u, free and kill. + */ +static void i1480u_disconnect(struct usb_interface *iface) +{ + struct i1480u *i1480u; + struct net_device *net_dev; + + i1480u = usb_get_intfdata(iface); + net_dev = i1480u->net_dev; + netif_stop_queue(net_dev); +#ifdef i1480u_FLOW_CONTROL + usb_kill_urb(i1480u->notif_urb); +#endif + i1480u_sysfs_release(i1480u); + unregister_netdev(net_dev); + i1480u_rm(i1480u); + free_netdev(net_dev); +} + +static struct usb_device_id i1480u_id_table[] = { + { + .match_flags = USB_DEVICE_ID_MATCH_DEVICE \ + | USB_DEVICE_ID_MATCH_DEV_INFO \ + | USB_DEVICE_ID_MATCH_INT_INFO, + .idVendor = 0x8086, + .idProduct = 0x0c3b, + .bDeviceClass = 0xef, + .bDeviceSubClass = 0x02, + .bDeviceProtocol = 0x02, + .bInterfaceClass = 0xff, + .bInterfaceSubClass = 0xff, + .bInterfaceProtocol = 0xff, + }, + {}, +}; +MODULE_DEVICE_TABLE(usb, i1480u_id_table); + +static struct usb_driver i1480u_driver = { + .name = KBUILD_MODNAME, + .probe = i1480u_probe, + .disconnect = i1480u_disconnect, + .id_table = i1480u_id_table, +}; + +static int __init i1480u_driver_init(void) +{ + return usb_register(&i1480u_driver); +} +module_init(i1480u_driver_init); + + +static void __exit i1480u_driver_exit(void) +{ + usb_deregister(&i1480u_driver); +} +module_exit(i1480u_driver_exit); + +MODULE_AUTHOR("Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>"); +MODULE_DESCRIPTION("i1480 Wireless UWB Link WLP networking for USB"); +MODULE_LICENSE("GPL"); diff --git a/drivers/uwb/i1480/i1480u-wlp/netdev.c b/drivers/uwb/i1480/i1480u-wlp/netdev.c new file mode 100644 index 000000000000..8802ac43d872 --- /dev/null +++ b/drivers/uwb/i1480/i1480u-wlp/netdev.c @@ -0,0 +1,368 @@ +/* + * WUSB Wire Adapter: WLP interface + * Driver for the Linux Network stack. + * + * Copyright (C) 2005-2006 Intel Corporation + * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + * + * + * FIXME: docs + * + * Implementation of the netdevice linkage (except tx and rx related stuff). + * + * ROADMAP: + * + * ENTRY POINTS (Net device): + * + * i1480u_open(): Called when we ifconfig up the interface; + * associates to a UWB host controller, reserves + * bandwidth (MAS), sets up RX USB URB and starts + * the queue. + * + * i1480u_stop(): Called when we ifconfig down a interface; + * reverses _open(). + * + * i1480u_set_config(): + */ + +#include <linux/if_arp.h> +#include <linux/etherdevice.h> +#include <linux/uwb/debug.h> +#include "i1480u-wlp.h" + +struct i1480u_cmd_set_ip_mas { + struct uwb_rccb rccb; + struct uwb_dev_addr addr; + u8 stream; + u8 owner; + u8 type; /* enum uwb_drp_type */ + u8 baMAS[32]; +} __attribute__((packed)); + + +static +int i1480u_set_ip_mas( + struct uwb_rc *rc, + const struct uwb_dev_addr *dstaddr, + u8 stream, u8 owner, u8 type, unsigned long *mas) +{ + + int result; + struct i1480u_cmd_set_ip_mas *cmd; + struct uwb_rc_evt_confirm reply; + + result = -ENOMEM; + cmd = kzalloc(sizeof(*cmd), GFP_KERNEL); + if (cmd == NULL) + goto error_kzalloc; + cmd->rccb.bCommandType = 0xfd; + cmd->rccb.wCommand = cpu_to_le16(0x000e); + cmd->addr = *dstaddr; + cmd->stream = stream; + cmd->owner = owner; + cmd->type = type; + if (mas == NULL) + memset(cmd->baMAS, 0x00, sizeof(cmd->baMAS)); + else + memcpy(cmd->baMAS, mas, sizeof(cmd->baMAS)); + reply.rceb.bEventType = 0xfd; + reply.rceb.wEvent = cpu_to_le16(0x000e); + result = uwb_rc_cmd(rc, "SET-IP-MAS", &cmd->rccb, sizeof(*cmd), + &reply.rceb, sizeof(reply)); + if (result < 0) + goto error_cmd; + if (reply.bResultCode != UWB_RC_RES_FAIL) { + dev_err(&rc->uwb_dev.dev, + "SET-IP-MAS: command execution failed: %d\n", + reply.bResultCode); + result = -EIO; + } +error_cmd: + kfree(cmd); +error_kzalloc: + return result; +} + +/* + * Inform a WLP interface of a MAS reservation + * + * @rc is assumed refcnted. + */ +/* FIXME: detect if remote device is WLP capable? */ +static int i1480u_mas_set_dev(struct uwb_dev *uwb_dev, struct uwb_rc *rc, + u8 stream, u8 owner, u8 type, unsigned long *mas) +{ + int result = 0; + struct device *dev = &rc->uwb_dev.dev; + + result = i1480u_set_ip_mas(rc, &uwb_dev->dev_addr, stream, owner, + type, mas); + if (result < 0) { + char rcaddrbuf[UWB_ADDR_STRSIZE], devaddrbuf[UWB_ADDR_STRSIZE]; + uwb_dev_addr_print(rcaddrbuf, sizeof(rcaddrbuf), + &rc->uwb_dev.dev_addr); + uwb_dev_addr_print(devaddrbuf, sizeof(devaddrbuf), + &uwb_dev->dev_addr); + dev_err(dev, "Set IP MAS (%s to %s) failed: %d\n", + rcaddrbuf, devaddrbuf, result); + } + return result; +} + +/** + * Called by bandwidth allocator when change occurs in reservation. + * + * @rsv: The reservation that is being established, modified, or + * terminated. + * + * When a reservation is established, modified, or terminated the upper layer + * (WLP here) needs set/update the currently available Media Access Slots + * that can be use for IP traffic. + * + * Our action taken during failure depends on how the reservation is being + * changed: + * - if reservation is being established we do nothing if we cannot set the + * new MAS to be used + * - if reservation is being terminated we revert back to PCA whether the + * SET IP MAS command succeeds or not. + */ +void i1480u_bw_alloc_cb(struct uwb_rsv *rsv) +{ + int result = 0; + struct i1480u *i1480u = rsv->pal_priv; + struct device *dev = &i1480u->usb_iface->dev; + struct uwb_dev *target_dev = rsv->target.dev; + struct uwb_rc *rc = i1480u->wlp.rc; + u8 stream = rsv->stream; + int type = rsv->type; + int is_owner = rsv->owner == &rc->uwb_dev; + unsigned long *bmp = rsv->mas.bm; + + dev_err(dev, "WLP callback called - sending set ip mas\n"); + /*user cannot change options while setting configuration*/ + mutex_lock(&i1480u->options.mutex); + switch (rsv->state) { + case UWB_RSV_STATE_T_ACCEPTED: + case UWB_RSV_STATE_O_ESTABLISHED: + result = i1480u_mas_set_dev(target_dev, rc, stream, is_owner, + type, bmp); + if (result < 0) { + dev_err(dev, "MAS reservation failed: %d\n", result); + goto out; + } + if (is_owner) { + wlp_tx_hdr_set_delivery_id_type(&i1480u->options.def_tx_hdr, + WLP_DRP | stream); + wlp_tx_hdr_set_rts_cts(&i1480u->options.def_tx_hdr, 0); + } + break; + case UWB_RSV_STATE_NONE: + /* revert back to PCA */ + result = i1480u_mas_set_dev(target_dev, rc, stream, is_owner, + type, bmp); + if (result < 0) + dev_err(dev, "MAS reservation failed: %d\n", result); + /* Revert to PCA even though SET IP MAS failed. */ + wlp_tx_hdr_set_delivery_id_type(&i1480u->options.def_tx_hdr, + i1480u->options.pca_base_priority); + wlp_tx_hdr_set_rts_cts(&i1480u->options.def_tx_hdr, 1); + break; + default: + dev_err(dev, "unexpected WLP reservation state: %s (%d).\n", + uwb_rsv_state_str(rsv->state), rsv->state); + break; + } +out: + mutex_unlock(&i1480u->options.mutex); + return; +} + +/** + * + * Called on 'ifconfig up' + */ +int i1480u_open(struct net_device *net_dev) +{ + int result; + struct i1480u *i1480u = netdev_priv(net_dev); + struct wlp *wlp = &i1480u->wlp; + struct uwb_rc *rc; + struct device *dev = &i1480u->usb_iface->dev; + + rc = wlp->rc; + result = i1480u_rx_setup(i1480u); /* Alloc RX stuff */ + if (result < 0) + goto error_rx_setup; + netif_wake_queue(net_dev); +#ifdef i1480u_FLOW_CONTROL + result = usb_submit_urb(i1480u->notif_urb, GFP_KERNEL);; + if (result < 0) { + dev_err(dev, "Can't submit notification URB: %d\n", result); + goto error_notif_urb_submit; + } +#endif + i1480u->uwb_notifs_handler.cb = i1480u_uwb_notifs_cb; + i1480u->uwb_notifs_handler.data = i1480u; + if (uwb_bg_joined(rc)) + netif_carrier_on(net_dev); + else + netif_carrier_off(net_dev); + uwb_notifs_register(rc, &i1480u->uwb_notifs_handler); + /* Interface is up with an address, now we can create WSS */ + result = wlp_wss_setup(net_dev, &wlp->wss); + if (result < 0) { + dev_err(dev, "Can't create WSS: %d. \n", result); + goto error_notif_deregister; + } + return 0; +error_notif_deregister: + uwb_notifs_deregister(rc, &i1480u->uwb_notifs_handler); +#ifdef i1480u_FLOW_CONTROL +error_notif_urb_submit: +#endif + netif_stop_queue(net_dev); + i1480u_rx_release(i1480u); +error_rx_setup: + return result; +} + + +/** + * Called on 'ifconfig down' + */ +int i1480u_stop(struct net_device *net_dev) +{ + struct i1480u *i1480u = netdev_priv(net_dev); + struct wlp *wlp = &i1480u->wlp; + struct uwb_rc *rc = wlp->rc; + + BUG_ON(wlp->rc == NULL); + wlp_wss_remove(&wlp->wss); + uwb_notifs_deregister(rc, &i1480u->uwb_notifs_handler); + netif_carrier_off(net_dev); +#ifdef i1480u_FLOW_CONTROL + usb_kill_urb(i1480u->notif_urb); +#endif + netif_stop_queue(net_dev); + i1480u_rx_release(i1480u); + i1480u_tx_release(i1480u); + return 0; +} + + +/** Report statistics */ +struct net_device_stats *i1480u_get_stats(struct net_device *net_dev) +{ + struct i1480u *i1480u = netdev_priv(net_dev); + return &i1480u->stats; +} + + +/** + * + * Change the interface config--we probably don't have to do anything. + */ +int i1480u_set_config(struct net_device *net_dev, struct ifmap *map) +{ + int result; + struct i1480u *i1480u = netdev_priv(net_dev); + BUG_ON(i1480u->wlp.rc == NULL); + result = 0; + return result; +} + +/** + * Change the MTU of the interface + */ +int i1480u_change_mtu(struct net_device *net_dev, int mtu) +{ + static union { + struct wlp_tx_hdr tx; + struct wlp_rx_hdr rx; + } i1480u_all_hdrs; + + if (mtu < ETH_HLEN) /* We encap eth frames */ + return -ERANGE; + if (mtu > 4000 - sizeof(i1480u_all_hdrs)) + return -ERANGE; + net_dev->mtu = mtu; + return 0; +} + + +/** + * Callback function to handle events from UWB + * When we see other devices we know the carrier is ok, + * if we are the only device in the beacon group we set the carrier + * state to off. + * */ +void i1480u_uwb_notifs_cb(void *data, struct uwb_dev *uwb_dev, + enum uwb_notifs event) +{ + struct i1480u *i1480u = data; + struct net_device *net_dev = i1480u->net_dev; + struct device *dev = &i1480u->usb_iface->dev; + switch (event) { + case UWB_NOTIF_BG_JOIN: + netif_carrier_on(net_dev); + dev_info(dev, "Link is up\n"); + break; + case UWB_NOTIF_BG_LEAVE: + netif_carrier_off(net_dev); + dev_info(dev, "Link is down\n"); + break; + default: + dev_err(dev, "don't know how to handle event %d from uwb\n", + event); + } +} + +/** + * Stop the network queue + * + * Enable WLP substack to stop network queue. We also set the flow control + * threshold at this time to prevent the flow control from restarting the + * queue. + * + * we are loosing the current threshold value here ... FIXME? + */ +void i1480u_stop_queue(struct wlp *wlp) +{ + struct i1480u *i1480u = container_of(wlp, struct i1480u, wlp); + struct net_device *net_dev = i1480u->net_dev; + i1480u->tx_inflight.threshold = 0; + netif_stop_queue(net_dev); +} + +/** + * Start the network queue + * + * Enable WLP substack to start network queue. Also re-enable the flow + * control to manage the queue again. + * + * We re-enable the flow control by storing the default threshold in the + * flow control threshold. This means that if the user modified the + * threshold before the queue was stopped and restarted that information + * will be lost. FIXME? + */ +void i1480u_start_queue(struct wlp *wlp) +{ + struct i1480u *i1480u = container_of(wlp, struct i1480u, wlp); + struct net_device *net_dev = i1480u->net_dev; + i1480u->tx_inflight.threshold = i1480u_TX_INFLIGHT_THRESHOLD; + netif_start_queue(net_dev); +} diff --git a/drivers/uwb/i1480/i1480u-wlp/rx.c b/drivers/uwb/i1480/i1480u-wlp/rx.c new file mode 100644 index 000000000000..9fc035354a76 --- /dev/null +++ b/drivers/uwb/i1480/i1480u-wlp/rx.c @@ -0,0 +1,486 @@ +/* + * WUSB Wire Adapter: WLP interface + * Driver for the Linux Network stack. + * + * Copyright (C) 2005-2006 Intel Corporation + * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + * + * + * i1480u's RX handling is simple. i1480u will send the received + * network packets broken up in fragments; 1 to N fragments make a + * packet, we assemble them together and deliver the packet with netif_rx(). + * + * Beacuse each USB transfer is a *single* fragment (except when the + * transfer contains a first fragment), each URB called thus + * back contains one or two fragments. So we queue N URBs, each with its own + * fragment buffer. When a URB is done, we process it (adding to the + * current skb from the fragment buffer until complete). Once + * processed, we requeue the URB. There is always a bunch of URBs + * ready to take data, so the intergap should be minimal. + * + * An URB's transfer buffer is the data field of a socket buffer. This + * reduces copying as data can be passed directly to network layer. If a + * complete packet or 1st fragment is received the URB's transfer buffer is + * taken away from it and used to send data to the network layer. In this + * case a new transfer buffer is allocated to the URB before being requeued. + * If a "NEXT" or "LAST" fragment is received, the fragment contents is + * appended to the RX packet under construction and the transfer buffer + * is reused. To be able to use this buffer to assemble complete packets + * we set each buffer's size to that of the MAX ethernet packet that can + * be received. There is thus room for improvement in memory usage. + * + * When the max tx fragment size increases, we should be able to read + * data into the skbs directly with very simple code. + * + * ROADMAP: + * + * ENTRY POINTS: + * + * i1480u_rx_setup(): setup RX context [from i1480u_open()] + * + * i1480u_rx_release(): release RX context [from i1480u_stop()] + * + * i1480u_rx_cb(): called when the RX USB URB receives a + * packet. It removes the header and pushes it up + * the Linux netdev stack with netif_rx(). + * + * i1480u_rx_buffer() + * i1480u_drop() and i1480u_fix() + * i1480u_skb_deliver + * + */ + +#include <linux/netdevice.h> +#include <linux/etherdevice.h> +#include "i1480u-wlp.h" + +#define D_LOCAL 0 +#include <linux/uwb/debug.h> + + +/** + * Setup the RX context + * + * Each URB is provided with a transfer_buffer that is the data field + * of a new socket buffer. + */ +int i1480u_rx_setup(struct i1480u *i1480u) +{ + int result, cnt; + struct device *dev = &i1480u->usb_iface->dev; + struct net_device *net_dev = i1480u->net_dev; + struct usb_endpoint_descriptor *epd; + struct sk_buff *skb; + + /* Alloc RX stuff */ + i1480u->rx_skb = NULL; /* not in process of receiving packet */ + result = -ENOMEM; + epd = &i1480u->usb_iface->cur_altsetting->endpoint[1].desc; + for (cnt = 0; cnt < i1480u_RX_BUFS; cnt++) { + struct i1480u_rx_buf *rx_buf = &i1480u->rx_buf[cnt]; + rx_buf->i1480u = i1480u; + skb = dev_alloc_skb(i1480u_MAX_RX_PKT_SIZE); + if (!skb) { + dev_err(dev, + "RX: cannot allocate RX buffer %d\n", cnt); + result = -ENOMEM; + goto error; + } + skb->dev = net_dev; + skb->ip_summed = CHECKSUM_NONE; + skb_reserve(skb, 2); + rx_buf->data = skb; + rx_buf->urb = usb_alloc_urb(0, GFP_KERNEL); + if (unlikely(rx_buf->urb == NULL)) { + dev_err(dev, "RX: cannot allocate URB %d\n", cnt); + result = -ENOMEM; + goto error; + } + usb_fill_bulk_urb(rx_buf->urb, i1480u->usb_dev, + usb_rcvbulkpipe(i1480u->usb_dev, epd->bEndpointAddress), + rx_buf->data->data, i1480u_MAX_RX_PKT_SIZE - 2, + i1480u_rx_cb, rx_buf); + result = usb_submit_urb(rx_buf->urb, GFP_NOIO); + if (unlikely(result < 0)) { + dev_err(dev, "RX: cannot submit URB %d: %d\n", + cnt, result); + goto error; + } + } + return 0; + +error: + i1480u_rx_release(i1480u); + return result; +} + + +/** Release resources associated to the rx context */ +void i1480u_rx_release(struct i1480u *i1480u) +{ + int cnt; + for (cnt = 0; cnt < i1480u_RX_BUFS; cnt++) { + if (i1480u->rx_buf[cnt].data) + dev_kfree_skb(i1480u->rx_buf[cnt].data); + if (i1480u->rx_buf[cnt].urb) { + usb_kill_urb(i1480u->rx_buf[cnt].urb); + usb_free_urb(i1480u->rx_buf[cnt].urb); + } + } + if (i1480u->rx_skb != NULL) + dev_kfree_skb(i1480u->rx_skb); +} + +static +void i1480u_rx_unlink_urbs(struct i1480u *i1480u) +{ + int cnt; + for (cnt = 0; cnt < i1480u_RX_BUFS; cnt++) { + if (i1480u->rx_buf[cnt].urb) + usb_unlink_urb(i1480u->rx_buf[cnt].urb); + } +} + +/** Fix an out-of-sequence packet */ +#define i1480u_fix(i1480u, msg...) \ +do { \ + if (printk_ratelimit()) \ + dev_err(&i1480u->usb_iface->dev, msg); \ + dev_kfree_skb_irq(i1480u->rx_skb); \ + i1480u->rx_skb = NULL; \ + i1480u->rx_untd_pkt_size = 0; \ +} while (0) + + +/** Drop an out-of-sequence packet */ +#define i1480u_drop(i1480u, msg...) \ +do { \ + if (printk_ratelimit()) \ + dev_err(&i1480u->usb_iface->dev, msg); \ + i1480u->stats.rx_dropped++; \ +} while (0) + + + + +/** Finalizes setting up the SKB and delivers it + * + * We first pass the incoming frame to WLP substack for verification. It + * may also be a WLP association frame in which case WLP will take over the + * processing. If WLP does not take it over it will still verify it, if the + * frame is invalid the skb will be freed by WLP and we will not continue + * parsing. + * */ +static +void i1480u_skb_deliver(struct i1480u *i1480u) +{ + int should_parse; + struct net_device *net_dev = i1480u->net_dev; + struct device *dev = &i1480u->usb_iface->dev; + + d_printf(6, dev, "RX delivered pre skb(%p), %u bytes\n", + i1480u->rx_skb, i1480u->rx_skb->len); + d_dump(7, dev, i1480u->rx_skb->data, i1480u->rx_skb->len); + should_parse = wlp_receive_frame(dev, &i1480u->wlp, i1480u->rx_skb, + &i1480u->rx_srcaddr); + if (!should_parse) + goto out; + i1480u->rx_skb->protocol = eth_type_trans(i1480u->rx_skb, net_dev); + d_printf(5, dev, "RX delivered skb(%p), %u bytes\n", + i1480u->rx_skb, i1480u->rx_skb->len); + d_dump(7, dev, i1480u->rx_skb->data, + i1480u->rx_skb->len > 72 ? 72 : i1480u->rx_skb->len); + i1480u->stats.rx_packets++; + i1480u->stats.rx_bytes += i1480u->rx_untd_pkt_size; + net_dev->last_rx = jiffies; + /* FIXME: flow control: check netif_rx() retval */ + + netif_rx(i1480u->rx_skb); /* deliver */ +out: + i1480u->rx_skb = NULL; + i1480u->rx_untd_pkt_size = 0; +} + + +/** + * Process a buffer of data received from the USB RX endpoint + * + * First fragment arrives with next or last fragment. All other fragments + * arrive alone. + * + * /me hates long functions. + */ +static +void i1480u_rx_buffer(struct i1480u_rx_buf *rx_buf) +{ + unsigned pkt_completed = 0; /* !0 when we got all pkt fragments */ + size_t untd_hdr_size, untd_frg_size; + size_t i1480u_hdr_size; + struct wlp_rx_hdr *i1480u_hdr = NULL; + + struct i1480u *i1480u = rx_buf->i1480u; + struct sk_buff *skb = rx_buf->data; + int size_left = rx_buf->urb->actual_length; + void *ptr = rx_buf->urb->transfer_buffer; /* also rx_buf->data->data */ + struct untd_hdr *untd_hdr; + + struct net_device *net_dev = i1480u->net_dev; + struct device *dev = &i1480u->usb_iface->dev; + struct sk_buff *new_skb; + +#if 0 + dev_fnstart(dev, + "(i1480u %p ptr %p size_left %zu)\n", i1480u, ptr, size_left); + dev_err(dev, "RX packet, %zu bytes\n", size_left); + dump_bytes(dev, ptr, size_left); +#endif + i1480u_hdr_size = sizeof(struct wlp_rx_hdr); + + while (size_left > 0) { + if (pkt_completed) { + i1480u_drop(i1480u, "RX: fragment follows completed" + "packet in same buffer. Dropping\n"); + break; + } + untd_hdr = ptr; + if (size_left < sizeof(*untd_hdr)) { /* Check the UNTD header */ + i1480u_drop(i1480u, "RX: short UNTD header! Dropping\n"); + goto out; + } + if (unlikely(untd_hdr_rx_tx(untd_hdr) == 0)) { /* Paranoia: TX set? */ + i1480u_drop(i1480u, "RX: TX bit set! Dropping\n"); + goto out; + } + switch (untd_hdr_type(untd_hdr)) { /* Check the UNTD header type */ + case i1480u_PKT_FRAG_1ST: { + struct untd_hdr_1st *untd_hdr_1st = (void *) untd_hdr; + dev_dbg(dev, "1st fragment\n"); + untd_hdr_size = sizeof(struct untd_hdr_1st); + if (i1480u->rx_skb != NULL) + i1480u_fix(i1480u, "RX: 1st fragment out of " + "sequence! Fixing\n"); + if (size_left < untd_hdr_size + i1480u_hdr_size) { + i1480u_drop(i1480u, "RX: short 1st fragment! " + "Dropping\n"); + goto out; + } + i1480u->rx_untd_pkt_size = le16_to_cpu(untd_hdr->len) + - i1480u_hdr_size; + untd_frg_size = le16_to_cpu(untd_hdr_1st->fragment_len); + if (size_left < untd_hdr_size + untd_frg_size) { + i1480u_drop(i1480u, + "RX: short payload! Dropping\n"); + goto out; + } + i1480u->rx_skb = skb; + i1480u_hdr = (void *) untd_hdr_1st + untd_hdr_size; + i1480u->rx_srcaddr = i1480u_hdr->srcaddr; + skb_put(i1480u->rx_skb, untd_hdr_size + untd_frg_size); + skb_pull(i1480u->rx_skb, untd_hdr_size + i1480u_hdr_size); + stats_add_sample(&i1480u->lqe_stats, (s8) i1480u_hdr->LQI - 7); + stats_add_sample(&i1480u->rssi_stats, i1480u_hdr->RSSI + 18); + rx_buf->data = NULL; /* need to create new buffer */ + break; + } + case i1480u_PKT_FRAG_NXT: { + dev_dbg(dev, "nxt fragment\n"); + untd_hdr_size = sizeof(struct untd_hdr_rst); + if (i1480u->rx_skb == NULL) { + i1480u_drop(i1480u, "RX: next fragment out of " + "sequence! Dropping\n"); + goto out; + } + if (size_left < untd_hdr_size) { + i1480u_drop(i1480u, "RX: short NXT fragment! " + "Dropping\n"); + goto out; + } + untd_frg_size = le16_to_cpu(untd_hdr->len); + if (size_left < untd_hdr_size + untd_frg_size) { + i1480u_drop(i1480u, + "RX: short payload! Dropping\n"); + goto out; + } + memmove(skb_put(i1480u->rx_skb, untd_frg_size), + ptr + untd_hdr_size, untd_frg_size); + break; + } + case i1480u_PKT_FRAG_LST: { + dev_dbg(dev, "Lst fragment\n"); + untd_hdr_size = sizeof(struct untd_hdr_rst); + if (i1480u->rx_skb == NULL) { + i1480u_drop(i1480u, "RX: last fragment out of " + "sequence! Dropping\n"); + goto out; + } + if (size_left < untd_hdr_size) { + i1480u_drop(i1480u, "RX: short LST fragment! " + "Dropping\n"); + goto out; + } + untd_frg_size = le16_to_cpu(untd_hdr->len); + if (size_left < untd_frg_size + untd_hdr_size) { + i1480u_drop(i1480u, + "RX: short payload! Dropping\n"); + goto out; + } + memmove(skb_put(i1480u->rx_skb, untd_frg_size), + ptr + untd_hdr_size, untd_frg_size); + pkt_completed = 1; + break; + } + case i1480u_PKT_FRAG_CMP: { + dev_dbg(dev, "cmp fragment\n"); + untd_hdr_size = sizeof(struct untd_hdr_cmp); + if (i1480u->rx_skb != NULL) + i1480u_fix(i1480u, "RX: fix out-of-sequence CMP" + " fragment!\n"); + if (size_left < untd_hdr_size + i1480u_hdr_size) { + i1480u_drop(i1480u, "RX: short CMP fragment! " + "Dropping\n"); + goto out; + } + i1480u->rx_untd_pkt_size = le16_to_cpu(untd_hdr->len); + untd_frg_size = i1480u->rx_untd_pkt_size; + if (size_left < i1480u->rx_untd_pkt_size + untd_hdr_size) { + i1480u_drop(i1480u, + "RX: short payload! Dropping\n"); + goto out; + } + i1480u->rx_skb = skb; + i1480u_hdr = (void *) untd_hdr + untd_hdr_size; + i1480u->rx_srcaddr = i1480u_hdr->srcaddr; + stats_add_sample(&i1480u->lqe_stats, (s8) i1480u_hdr->LQI - 7); + stats_add_sample(&i1480u->rssi_stats, i1480u_hdr->RSSI + 18); + skb_put(i1480u->rx_skb, untd_hdr_size + i1480u->rx_untd_pkt_size); + skb_pull(i1480u->rx_skb, untd_hdr_size + i1480u_hdr_size); + rx_buf->data = NULL; /* for hand off skb to network stack */ + pkt_completed = 1; + i1480u->rx_untd_pkt_size -= i1480u_hdr_size; /* accurate stat */ + break; + } + default: + i1480u_drop(i1480u, "RX: unknown packet type %u! " + "Dropping\n", untd_hdr_type(untd_hdr)); + goto out; + } + size_left -= untd_hdr_size + untd_frg_size; + if (size_left > 0) + ptr += untd_hdr_size + untd_frg_size; + } + if (pkt_completed) + i1480u_skb_deliver(i1480u); +out: + /* recreate needed RX buffers*/ + if (rx_buf->data == NULL) { + /* buffer is being used to receive packet, create new */ + new_skb = dev_alloc_skb(i1480u_MAX_RX_PKT_SIZE); + if (!new_skb) { + if (printk_ratelimit()) + dev_err(dev, + "RX: cannot allocate RX buffer\n"); + } else { + new_skb->dev = net_dev; + new_skb->ip_summed = CHECKSUM_NONE; + skb_reserve(new_skb, 2); + rx_buf->data = new_skb; + } + } + return; +} + + +/** + * Called when an RX URB has finished receiving or has found some kind + * of error condition. + * + * LIMITATIONS: + * + * - We read USB-transfers, each transfer contains a SINGLE fragment + * (can contain a complete packet, or a 1st, next, or last fragment + * of a packet). + * Looks like a transfer can contain more than one fragment (07/18/06) + * + * - Each transfer buffer is the size of the maximum packet size (minus + * headroom), i1480u_MAX_PKT_SIZE - 2 + * + * - We always read the full USB-transfer, no partials. + * + * - Each transfer is read directly into a skb. This skb will be used to + * send data to the upper layers if it is the first fragment or a complete + * packet. In the other cases the data will be copied from the skb to + * another skb that is being prepared for the upper layers from a prev + * first fragment. + * + * It is simply too much of a pain. Gosh, there should be a unified + * SG infrastructure for *everything* [so that I could declare a SG + * buffer, pass it to USB for receiving, append some space to it if + * I wish, receive more until I have the whole chunk, adapt + * pointers on each fragment to remove hardware headers and then + * attach that to an skbuff and netif_rx()]. + */ +void i1480u_rx_cb(struct urb *urb) +{ + int result; + int do_parse_buffer = 1; + struct i1480u_rx_buf *rx_buf = urb->context; + struct i1480u *i1480u = rx_buf->i1480u; + struct device *dev = &i1480u->usb_iface->dev; + unsigned long flags; + u8 rx_buf_idx = rx_buf - i1480u->rx_buf; + + switch (urb->status) { + case 0: + break; + case -ECONNRESET: /* Not an error, but a controlled situation; */ + case -ENOENT: /* (we killed the URB)...so, no broadcast */ + case -ESHUTDOWN: /* going away! */ + dev_err(dev, "RX URB[%u]: goind down %d\n", + rx_buf_idx, urb->status); + goto error; + default: + dev_err(dev, "RX URB[%u]: unknown status %d\n", + rx_buf_idx, urb->status); + if (edc_inc(&i1480u->rx_errors, EDC_MAX_ERRORS, + EDC_ERROR_TIMEFRAME)) { + dev_err(dev, "RX: max acceptable errors exceeded," + " resetting device.\n"); + i1480u_rx_unlink_urbs(i1480u); + wlp_reset_all(&i1480u->wlp); + goto error; + } + do_parse_buffer = 0; + break; + } + spin_lock_irqsave(&i1480u->lock, flags); + /* chew the data fragments, extract network packets */ + if (do_parse_buffer) { + i1480u_rx_buffer(rx_buf); + if (rx_buf->data) { + rx_buf->urb->transfer_buffer = rx_buf->data->data; + result = usb_submit_urb(rx_buf->urb, GFP_ATOMIC); + if (result < 0) { + dev_err(dev, "RX URB[%u]: cannot submit %d\n", + rx_buf_idx, result); + } + } + } + spin_unlock_irqrestore(&i1480u->lock, flags); +error: + return; +} + diff --git a/drivers/uwb/i1480/i1480u-wlp/sysfs.c b/drivers/uwb/i1480/i1480u-wlp/sysfs.c new file mode 100644 index 000000000000..a1d8ca6ac935 --- /dev/null +++ b/drivers/uwb/i1480/i1480u-wlp/sysfs.c @@ -0,0 +1,408 @@ +/* + * WUSB Wire Adapter: WLP interface + * Sysfs interfaces + * + * Copyright (C) 2005-2006 Intel Corporation + * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + * + * + * FIXME: docs + */ + +#include <linux/netdevice.h> +#include <linux/etherdevice.h> +#include <linux/uwb/debug.h> +#include <linux/device.h> +#include "i1480u-wlp.h" + + +/** + * + * @dev: Class device from the net_device; assumed refcnted. + * + * Yes, I don't lock--we assume it is refcounted and I am getting a + * single byte value that is kind of atomic to read. + */ +ssize_t uwb_phy_rate_show(const struct wlp_options *options, char *buf) +{ + return sprintf(buf, "%u\n", + wlp_tx_hdr_phy_rate(&options->def_tx_hdr)); +} +EXPORT_SYMBOL_GPL(uwb_phy_rate_show); + + +ssize_t uwb_phy_rate_store(struct wlp_options *options, + const char *buf, size_t size) +{ + ssize_t result; + unsigned rate; + + result = sscanf(buf, "%u\n", &rate); + if (result != 1) { + result = -EINVAL; + goto out; + } + result = -EINVAL; + if (rate >= UWB_PHY_RATE_INVALID) + goto out; + wlp_tx_hdr_set_phy_rate(&options->def_tx_hdr, rate); + result = 0; +out: + return result < 0 ? result : size; +} +EXPORT_SYMBOL_GPL(uwb_phy_rate_store); + + +ssize_t uwb_rts_cts_show(const struct wlp_options *options, char *buf) +{ + return sprintf(buf, "%u\n", + wlp_tx_hdr_rts_cts(&options->def_tx_hdr)); +} +EXPORT_SYMBOL_GPL(uwb_rts_cts_show); + + +ssize_t uwb_rts_cts_store(struct wlp_options *options, + const char *buf, size_t size) +{ + ssize_t result; + unsigned value; + + result = sscanf(buf, "%u\n", &value); + if (result != 1) { + result = -EINVAL; + goto out; + } + result = -EINVAL; + wlp_tx_hdr_set_rts_cts(&options->def_tx_hdr, !!value); + result = 0; +out: + return result < 0 ? result : size; +} +EXPORT_SYMBOL_GPL(uwb_rts_cts_store); + + +ssize_t uwb_ack_policy_show(const struct wlp_options *options, char *buf) +{ + return sprintf(buf, "%u\n", + wlp_tx_hdr_ack_policy(&options->def_tx_hdr)); +} +EXPORT_SYMBOL_GPL(uwb_ack_policy_show); + + +ssize_t uwb_ack_policy_store(struct wlp_options *options, + const char *buf, size_t size) +{ + ssize_t result; + unsigned value; + + result = sscanf(buf, "%u\n", &value); + if (result != 1 || value > UWB_ACK_B_REQ) { + result = -EINVAL; + goto out; + } + wlp_tx_hdr_set_ack_policy(&options->def_tx_hdr, value); + result = 0; +out: + return result < 0 ? result : size; +} +EXPORT_SYMBOL_GPL(uwb_ack_policy_store); + + +/** + * Show the PCA base priority. + * + * We can access without locking, as the value is (for now) orthogonal + * to other values. + */ +ssize_t uwb_pca_base_priority_show(const struct wlp_options *options, + char *buf) +{ + return sprintf(buf, "%u\n", + options->pca_base_priority); +} +EXPORT_SYMBOL_GPL(uwb_pca_base_priority_show); + + +/** + * Set the PCA base priority. + * + * We can access without locking, as the value is (for now) orthogonal + * to other values. + */ +ssize_t uwb_pca_base_priority_store(struct wlp_options *options, + const char *buf, size_t size) +{ + ssize_t result = -EINVAL; + u8 pca_base_priority; + + result = sscanf(buf, "%hhu\n", &pca_base_priority); + if (result != 1) { + result = -EINVAL; + goto out; + } + result = -EINVAL; + if (pca_base_priority >= 8) + goto out; + options->pca_base_priority = pca_base_priority; + /* Update TX header if we are currently using PCA. */ + if (result >= 0 && (wlp_tx_hdr_delivery_id_type(&options->def_tx_hdr) & WLP_DRP) == 0) + wlp_tx_hdr_set_delivery_id_type(&options->def_tx_hdr, options->pca_base_priority); + result = 0; +out: + return result < 0 ? result : size; +} +EXPORT_SYMBOL_GPL(uwb_pca_base_priority_store); + +/** + * Show current inflight values + * + * Will print the current MAX and THRESHOLD values for the basic flow + * control. In addition it will report how many times the TX queue needed + * to be restarted since the last time this query was made. + */ +static ssize_t wlp_tx_inflight_show(struct i1480u_tx_inflight *inflight, + char *buf) +{ + ssize_t result; + unsigned long sec_elapsed = (jiffies - inflight->restart_ts)/HZ; + unsigned long restart_count = atomic_read(&inflight->restart_count); + + result = scnprintf(buf, PAGE_SIZE, "%lu %lu %d %lu %lu %lu\n" + "#read: threshold max inflight_count restarts " + "seconds restarts/sec\n" + "#write: threshold max\n", + inflight->threshold, inflight->max, + atomic_read(&inflight->count), + restart_count, sec_elapsed, + sec_elapsed == 0 ? 0 : restart_count/sec_elapsed); + inflight->restart_ts = jiffies; + atomic_set(&inflight->restart_count, 0); + return result; +} + +static +ssize_t wlp_tx_inflight_store(struct i1480u_tx_inflight *inflight, + const char *buf, size_t size) +{ + unsigned long in_threshold, in_max; + ssize_t result; + result = sscanf(buf, "%lu %lu", &in_threshold, &in_max); + if (result != 2) + return -EINVAL; + if (in_max <= in_threshold) + return -EINVAL; + inflight->max = in_max; + inflight->threshold = in_threshold; + return size; +} +/* + * Glue (or function adaptors) for accesing info on sysfs + * + * [we need this indirection because the PCI driver does almost the + * same] + * + * Linux 2.6.21 changed how 'struct netdevice' does attributes (from + * having a 'struct class_dev' to having a 'struct device'). That is + * quite of a pain. + * + * So we try to abstract that here. i1480u_SHOW() and i1480u_STORE() + * create adaptors for extracting the 'struct i1480u' from a 'struct + * dev' and calling a function for doing a sysfs operation (as we have + * them factorized already). i1480u_ATTR creates the attribute file + * (CLASS_DEVICE_ATTR or DEVICE_ATTR) and i1480u_ATTR_NAME produces a + * class_device_attr_NAME or device_attr_NAME (for group registration). + */ +#include <linux/version.h> + +#define i1480u_SHOW(name, fn, param) \ +static ssize_t i1480u_show_##name(struct device *dev, \ + struct device_attribute *attr,\ + char *buf) \ +{ \ + struct i1480u *i1480u = netdev_priv(to_net_dev(dev)); \ + return fn(&i1480u->param, buf); \ +} + +#define i1480u_STORE(name, fn, param) \ +static ssize_t i1480u_store_##name(struct device *dev, \ + struct device_attribute *attr,\ + const char *buf, size_t size)\ +{ \ + struct i1480u *i1480u = netdev_priv(to_net_dev(dev)); \ + return fn(&i1480u->param, buf, size); \ +} + +#define i1480u_ATTR(name, perm) static DEVICE_ATTR(name, perm, \ + i1480u_show_##name,\ + i1480u_store_##name) + +#define i1480u_ATTR_SHOW(name) static DEVICE_ATTR(name, \ + S_IRUGO, \ + i1480u_show_##name, NULL) + +#define i1480u_ATTR_NAME(a) (dev_attr_##a) + + +/* + * Sysfs adaptors + */ +i1480u_SHOW(uwb_phy_rate, uwb_phy_rate_show, options); +i1480u_STORE(uwb_phy_rate, uwb_phy_rate_store, options); +i1480u_ATTR(uwb_phy_rate, S_IRUGO | S_IWUSR); + +i1480u_SHOW(uwb_rts_cts, uwb_rts_cts_show, options); +i1480u_STORE(uwb_rts_cts, uwb_rts_cts_store, options); +i1480u_ATTR(uwb_rts_cts, S_IRUGO | S_IWUSR); + +i1480u_SHOW(uwb_ack_policy, uwb_ack_policy_show, options); +i1480u_STORE(uwb_ack_policy, uwb_ack_policy_store, options); +i1480u_ATTR(uwb_ack_policy, S_IRUGO | S_IWUSR); + +i1480u_SHOW(uwb_pca_base_priority, uwb_pca_base_priority_show, options); +i1480u_STORE(uwb_pca_base_priority, uwb_pca_base_priority_store, options); +i1480u_ATTR(uwb_pca_base_priority, S_IRUGO | S_IWUSR); + +i1480u_SHOW(wlp_eda, wlp_eda_show, wlp); +i1480u_STORE(wlp_eda, wlp_eda_store, wlp); +i1480u_ATTR(wlp_eda, S_IRUGO | S_IWUSR); + +i1480u_SHOW(wlp_uuid, wlp_uuid_show, wlp); +i1480u_STORE(wlp_uuid, wlp_uuid_store, wlp); +i1480u_ATTR(wlp_uuid, S_IRUGO | S_IWUSR); + +i1480u_SHOW(wlp_dev_name, wlp_dev_name_show, wlp); +i1480u_STORE(wlp_dev_name, wlp_dev_name_store, wlp); +i1480u_ATTR(wlp_dev_name, S_IRUGO | S_IWUSR); + +i1480u_SHOW(wlp_dev_manufacturer, wlp_dev_manufacturer_show, wlp); +i1480u_STORE(wlp_dev_manufacturer, wlp_dev_manufacturer_store, wlp); +i1480u_ATTR(wlp_dev_manufacturer, S_IRUGO | S_IWUSR); + +i1480u_SHOW(wlp_dev_model_name, wlp_dev_model_name_show, wlp); +i1480u_STORE(wlp_dev_model_name, wlp_dev_model_name_store, wlp); +i1480u_ATTR(wlp_dev_model_name, S_IRUGO | S_IWUSR); + +i1480u_SHOW(wlp_dev_model_nr, wlp_dev_model_nr_show, wlp); +i1480u_STORE(wlp_dev_model_nr, wlp_dev_model_nr_store, wlp); +i1480u_ATTR(wlp_dev_model_nr, S_IRUGO | S_IWUSR); + +i1480u_SHOW(wlp_dev_serial, wlp_dev_serial_show, wlp); +i1480u_STORE(wlp_dev_serial, wlp_dev_serial_store, wlp); +i1480u_ATTR(wlp_dev_serial, S_IRUGO | S_IWUSR); + +i1480u_SHOW(wlp_dev_prim_category, wlp_dev_prim_category_show, wlp); +i1480u_STORE(wlp_dev_prim_category, wlp_dev_prim_category_store, wlp); +i1480u_ATTR(wlp_dev_prim_category, S_IRUGO | S_IWUSR); + +i1480u_SHOW(wlp_dev_prim_OUI, wlp_dev_prim_OUI_show, wlp); +i1480u_STORE(wlp_dev_prim_OUI, wlp_dev_prim_OUI_store, wlp); +i1480u_ATTR(wlp_dev_prim_OUI, S_IRUGO | S_IWUSR); + +i1480u_SHOW(wlp_dev_prim_OUI_sub, wlp_dev_prim_OUI_sub_show, wlp); +i1480u_STORE(wlp_dev_prim_OUI_sub, wlp_dev_prim_OUI_sub_store, wlp); +i1480u_ATTR(wlp_dev_prim_OUI_sub, S_IRUGO | S_IWUSR); + +i1480u_SHOW(wlp_dev_prim_subcat, wlp_dev_prim_subcat_show, wlp); +i1480u_STORE(wlp_dev_prim_subcat, wlp_dev_prim_subcat_store, wlp); +i1480u_ATTR(wlp_dev_prim_subcat, S_IRUGO | S_IWUSR); + +i1480u_SHOW(wlp_neighborhood, wlp_neighborhood_show, wlp); +i1480u_ATTR_SHOW(wlp_neighborhood); + +i1480u_SHOW(wss_activate, wlp_wss_activate_show, wlp.wss); +i1480u_STORE(wss_activate, wlp_wss_activate_store, wlp.wss); +i1480u_ATTR(wss_activate, S_IRUGO | S_IWUSR); + +/* + * Show the (min, max, avg) Line Quality Estimate (LQE, in dB) as over + * the last 256 received WLP frames (ECMA-368 13.3). + * + * [the -7dB that have to be substracted from the LQI to make the LQE + * are already taken into account]. + */ +i1480u_SHOW(wlp_lqe, stats_show, lqe_stats); +i1480u_STORE(wlp_lqe, stats_store, lqe_stats); +i1480u_ATTR(wlp_lqe, S_IRUGO | S_IWUSR); + +/* + * Show the Receive Signal Strength Indicator averaged over all the + * received WLP frames (ECMA-368 13.3). Still is not clear what + * this value is, but is kind of a percentage of the signal strength + * at the antenna. + */ +i1480u_SHOW(wlp_rssi, stats_show, rssi_stats); +i1480u_STORE(wlp_rssi, stats_store, rssi_stats); +i1480u_ATTR(wlp_rssi, S_IRUGO | S_IWUSR); + +/** + * We maintain a basic flow control counter. "count" how many TX URBs are + * outstanding. Only allow "max" + * TX URBs to be outstanding. If this value is reached the queue will be + * stopped. The queue will be restarted when there are + * "threshold" URBs outstanding. + */ +i1480u_SHOW(wlp_tx_inflight, wlp_tx_inflight_show, tx_inflight); +i1480u_STORE(wlp_tx_inflight, wlp_tx_inflight_store, tx_inflight); +i1480u_ATTR(wlp_tx_inflight, S_IRUGO | S_IWUSR); + +static struct attribute *i1480u_attrs[] = { + &i1480u_ATTR_NAME(uwb_phy_rate).attr, + &i1480u_ATTR_NAME(uwb_rts_cts).attr, + &i1480u_ATTR_NAME(uwb_ack_policy).attr, + &i1480u_ATTR_NAME(uwb_pca_base_priority).attr, + &i1480u_ATTR_NAME(wlp_lqe).attr, + &i1480u_ATTR_NAME(wlp_rssi).attr, + &i1480u_ATTR_NAME(wlp_eda).attr, + &i1480u_ATTR_NAME(wlp_uuid).attr, + &i1480u_ATTR_NAME(wlp_dev_name).attr, + &i1480u_ATTR_NAME(wlp_dev_manufacturer).attr, + &i1480u_ATTR_NAME(wlp_dev_model_name).attr, + &i1480u_ATTR_NAME(wlp_dev_model_nr).attr, + &i1480u_ATTR_NAME(wlp_dev_serial).attr, + &i1480u_ATTR_NAME(wlp_dev_prim_category).attr, + &i1480u_ATTR_NAME(wlp_dev_prim_OUI).attr, + &i1480u_ATTR_NAME(wlp_dev_prim_OUI_sub).attr, + &i1480u_ATTR_NAME(wlp_dev_prim_subcat).attr, + &i1480u_ATTR_NAME(wlp_neighborhood).attr, + &i1480u_ATTR_NAME(wss_activate).attr, + &i1480u_ATTR_NAME(wlp_tx_inflight).attr, + NULL, +}; + +static struct attribute_group i1480u_attr_group = { + .name = NULL, /* we want them in the same directory */ + .attrs = i1480u_attrs, +}; + +int i1480u_sysfs_setup(struct i1480u *i1480u) +{ + int result; + struct device *dev = &i1480u->usb_iface->dev; + result = sysfs_create_group(&i1480u->net_dev->dev.kobj, + &i1480u_attr_group); + if (result < 0) + dev_err(dev, "cannot initialize sysfs attributes: %d\n", + result); + return result; +} + + +void i1480u_sysfs_release(struct i1480u *i1480u) +{ + sysfs_remove_group(&i1480u->net_dev->dev.kobj, + &i1480u_attr_group); +} diff --git a/drivers/uwb/i1480/i1480u-wlp/tx.c b/drivers/uwb/i1480/i1480u-wlp/tx.c new file mode 100644 index 000000000000..3426bfb68240 --- /dev/null +++ b/drivers/uwb/i1480/i1480u-wlp/tx.c @@ -0,0 +1,632 @@ +/* + * WUSB Wire Adapter: WLP interface + * Deal with TX (massaging data to transmit, handling it) + * + * Copyright (C) 2005-2006 Intel Corporation + * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + * + * + * Transmission engine. Get an skb, create from that a WLP transmit + * context, add a WLP TX header (which we keep prefilled in the + * device's instance), fill out the target-specific fields and + * fire it. + * + * ROADMAP: + * + * Entry points: + * + * i1480u_tx_release(): called by i1480u_disconnect() to release + * pending tx contexts. + * + * i1480u_tx_cb(): callback for TX contexts (USB URBs) + * i1480u_tx_destroy(): + * + * i1480u_tx_timeout(): called for timeout handling from the + * network stack. + * + * i1480u_hard_start_xmit(): called for transmitting an skb from + * the network stack. Will interact with WLP + * substack to verify and prepare frame. + * i1480u_xmit_frame(): actual transmission on hardware + * + * i1480u_tx_create() Creates TX context + * i1480u_tx_create_1() For packets in 1 fragment + * i1480u_tx_create_n() For packets in >1 fragments + * + * TODO: + * + * - FIXME: rewrite using usb_sg_*(), add asynch support to + * usb_sg_*(). It might not make too much sense as most of + * the times the MTU will be smaller than one page... + */ + +#include "i1480u-wlp.h" +#define D_LOCAL 5 +#include <linux/uwb/debug.h> + +enum { + /* This is only for Next and Last TX packets */ + i1480u_MAX_PL_SIZE = i1480u_MAX_FRG_SIZE + - sizeof(struct untd_hdr_rst), +}; + +/** Free resources allocated to a i1480u tx context. */ +static +void i1480u_tx_free(struct i1480u_tx *wtx) +{ + kfree(wtx->buf); + if (wtx->skb) + dev_kfree_skb_irq(wtx->skb); + usb_free_urb(wtx->urb); + kfree(wtx); +} + +static +void i1480u_tx_destroy(struct i1480u *i1480u, struct i1480u_tx *wtx) +{ + unsigned long flags; + spin_lock_irqsave(&i1480u->tx_list_lock, flags); /* not active any more */ + list_del(&wtx->list_node); + i1480u_tx_free(wtx); + spin_unlock_irqrestore(&i1480u->tx_list_lock, flags); +} + +static +void i1480u_tx_unlink_urbs(struct i1480u *i1480u) +{ + unsigned long flags; + struct i1480u_tx *wtx, *next; + + spin_lock_irqsave(&i1480u->tx_list_lock, flags); + list_for_each_entry_safe(wtx, next, &i1480u->tx_list, list_node) { + usb_unlink_urb(wtx->urb); + } + spin_unlock_irqrestore(&i1480u->tx_list_lock, flags); +} + + +/** + * Callback for a completed tx USB URB. + * + * TODO: + * + * - FIXME: recover errors more gracefully + * - FIXME: handle NAKs (I dont think they come here) for flow ctl + */ +static +void i1480u_tx_cb(struct urb *urb) +{ + struct i1480u_tx *wtx = urb->context; + struct i1480u *i1480u = wtx->i1480u; + struct net_device *net_dev = i1480u->net_dev; + struct device *dev = &i1480u->usb_iface->dev; + unsigned long flags; + + switch (urb->status) { + case 0: + spin_lock_irqsave(&i1480u->lock, flags); + i1480u->stats.tx_packets++; + i1480u->stats.tx_bytes += urb->actual_length; + spin_unlock_irqrestore(&i1480u->lock, flags); + break; + case -ECONNRESET: /* Not an error, but a controlled situation; */ + case -ENOENT: /* (we killed the URB)...so, no broadcast */ + dev_dbg(dev, "notif endp: reset/noent %d\n", urb->status); + netif_stop_queue(net_dev); + break; + case -ESHUTDOWN: /* going away! */ + dev_dbg(dev, "notif endp: down %d\n", urb->status); + netif_stop_queue(net_dev); + break; + default: + dev_err(dev, "TX: unknown URB status %d\n", urb->status); + if (edc_inc(&i1480u->tx_errors, EDC_MAX_ERRORS, + EDC_ERROR_TIMEFRAME)) { + dev_err(dev, "TX: max acceptable errors exceeded." + "Reset device.\n"); + netif_stop_queue(net_dev); + i1480u_tx_unlink_urbs(i1480u); + wlp_reset_all(&i1480u->wlp); + } + break; + } + i1480u_tx_destroy(i1480u, wtx); + if (atomic_dec_return(&i1480u->tx_inflight.count) + <= i1480u->tx_inflight.threshold + && netif_queue_stopped(net_dev) + && i1480u->tx_inflight.threshold != 0) { + if (d_test(2) && printk_ratelimit()) + d_printf(2, dev, "Restart queue. \n"); + netif_start_queue(net_dev); + atomic_inc(&i1480u->tx_inflight.restart_count); + } + return; +} + + +/** + * Given a buffer that doesn't fit in a single fragment, create an + * scatter/gather structure for delivery to the USB pipe. + * + * Implements functionality of i1480u_tx_create(). + * + * @wtx: tx descriptor + * @skb: skb to send + * @gfp_mask: gfp allocation mask + * @returns: Pointer to @wtx if ok, NULL on error. + * + * Sorry, TOO LONG a function, but breaking it up is kind of hard + * + * This will break the buffer in chunks smaller than + * i1480u_MAX_FRG_SIZE (including the header) and add proper headers + * to each: + * + * 1st header \ + * i1480 tx header | fragment 1 + * fragment data / + * nxt header \ fragment 2 + * fragment data / + * .. + * .. + * last header \ fragment 3 + * last fragment data / + * + * This does not fill the i1480 TX header, it is left up to the + * caller to do that; you can get it from @wtx->wlp_tx_hdr. + * + * This function consumes the skb unless there is an error. + */ +static +int i1480u_tx_create_n(struct i1480u_tx *wtx, struct sk_buff *skb, + gfp_t gfp_mask) +{ + int result; + void *pl; + size_t pl_size; + + void *pl_itr, *buf_itr; + size_t pl_size_left, frgs, pl_size_1st, frg_pl_size = 0; + struct untd_hdr_1st *untd_hdr_1st; + struct wlp_tx_hdr *wlp_tx_hdr; + struct untd_hdr_rst *untd_hdr_rst; + + wtx->skb = NULL; + pl = skb->data; + pl_itr = pl; + pl_size = skb->len; + pl_size_left = pl_size; /* payload size */ + /* First fragment; fits as much as i1480u_MAX_FRG_SIZE minus + * the headers */ + pl_size_1st = i1480u_MAX_FRG_SIZE + - sizeof(struct untd_hdr_1st) - sizeof(struct wlp_tx_hdr); + BUG_ON(pl_size_1st > pl_size); + pl_size_left -= pl_size_1st; + /* The rest have an smaller header (no i1480 TX header). We + * need to break up the payload in blocks smaller than + * i1480u_MAX_PL_SIZE (payload excluding header). */ + frgs = (pl_size_left + i1480u_MAX_PL_SIZE - 1) / i1480u_MAX_PL_SIZE; + /* Allocate space for the new buffer. In this new buffer we'll + * place the headers followed by the data fragment, headers, + * data fragments, etc.. + */ + result = -ENOMEM; + wtx->buf_size = sizeof(*untd_hdr_1st) + + sizeof(*wlp_tx_hdr) + + frgs * sizeof(*untd_hdr_rst) + + pl_size; + wtx->buf = kmalloc(wtx->buf_size, gfp_mask); + if (wtx->buf == NULL) + goto error_buf_alloc; + + buf_itr = wtx->buf; /* We got the space, let's fill it up */ + /* Fill 1st fragment */ + untd_hdr_1st = buf_itr; + buf_itr += sizeof(*untd_hdr_1st); + untd_hdr_set_type(&untd_hdr_1st->hdr, i1480u_PKT_FRAG_1ST); + untd_hdr_set_rx_tx(&untd_hdr_1st->hdr, 0); + untd_hdr_1st->hdr.len = cpu_to_le16(pl_size + sizeof(*wlp_tx_hdr)); + untd_hdr_1st->fragment_len = + cpu_to_le16(pl_size_1st + sizeof(*wlp_tx_hdr)); + memset(untd_hdr_1st->padding, 0, sizeof(untd_hdr_1st->padding)); + /* Set up i1480 header info */ + wlp_tx_hdr = wtx->wlp_tx_hdr = buf_itr; + buf_itr += sizeof(*wlp_tx_hdr); + /* Copy the first fragment */ + memcpy(buf_itr, pl_itr, pl_size_1st); + pl_itr += pl_size_1st; + buf_itr += pl_size_1st; + + /* Now do each remaining fragment */ + result = -EINVAL; + while (pl_size_left > 0) { + d_printf(5, NULL, "ITR HDR: pl_size_left %zu buf_itr %zu\n", + pl_size_left, buf_itr - wtx->buf); + if (buf_itr + sizeof(*untd_hdr_rst) - wtx->buf + > wtx->buf_size) { + printk(KERN_ERR "BUG: no space for header\n"); + goto error_bug; + } + d_printf(5, NULL, "ITR HDR 2: pl_size_left %zu buf_itr %zu\n", + pl_size_left, buf_itr - wtx->buf); + untd_hdr_rst = buf_itr; + buf_itr += sizeof(*untd_hdr_rst); + if (pl_size_left > i1480u_MAX_PL_SIZE) { + frg_pl_size = i1480u_MAX_PL_SIZE; + untd_hdr_set_type(&untd_hdr_rst->hdr, i1480u_PKT_FRAG_NXT); + } else { + frg_pl_size = pl_size_left; + untd_hdr_set_type(&untd_hdr_rst->hdr, i1480u_PKT_FRAG_LST); + } + d_printf(5, NULL, + "ITR PL: pl_size_left %zu buf_itr %zu frg_pl_size %zu\n", + pl_size_left, buf_itr - wtx->buf, frg_pl_size); + untd_hdr_set_rx_tx(&untd_hdr_rst->hdr, 0); + untd_hdr_rst->hdr.len = cpu_to_le16(frg_pl_size); + untd_hdr_rst->padding = 0; + if (buf_itr + frg_pl_size - wtx->buf + > wtx->buf_size) { + printk(KERN_ERR "BUG: no space for payload\n"); + goto error_bug; + } + memcpy(buf_itr, pl_itr, frg_pl_size); + buf_itr += frg_pl_size; + pl_itr += frg_pl_size; + pl_size_left -= frg_pl_size; + d_printf(5, NULL, + "ITR PL 2: pl_size_left %zu buf_itr %zu frg_pl_size %zu\n", + pl_size_left, buf_itr - wtx->buf, frg_pl_size); + } + dev_kfree_skb_irq(skb); + return 0; + +error_bug: + printk(KERN_ERR + "BUG: skb %u bytes\n" + "BUG: frg_pl_size %zd i1480u_MAX_FRG_SIZE %u\n" + "BUG: buf_itr %zu buf_size %zu pl_size_left %zu\n", + skb->len, + frg_pl_size, i1480u_MAX_FRG_SIZE, + buf_itr - wtx->buf, wtx->buf_size, pl_size_left); + + kfree(wtx->buf); +error_buf_alloc: + return result; +} + + +/** + * Given a buffer that fits in a single fragment, fill out a @wtx + * struct for transmitting it down the USB pipe. + * + * Uses the fact that we have space reserved in front of the skbuff + * for hardware headers :] + * + * This does not fill the i1480 TX header, it is left up to the + * caller to do that; you can get it from @wtx->wlp_tx_hdr. + * + * @pl: pointer to payload data + * @pl_size: size of the payuload + * + * This function does not consume the @skb. + */ +static +int i1480u_tx_create_1(struct i1480u_tx *wtx, struct sk_buff *skb, + gfp_t gfp_mask) +{ + struct untd_hdr_cmp *untd_hdr_cmp; + struct wlp_tx_hdr *wlp_tx_hdr; + + wtx->buf = NULL; + wtx->skb = skb; + BUG_ON(skb_headroom(skb) < sizeof(*wlp_tx_hdr)); + wlp_tx_hdr = (void *) __skb_push(skb, sizeof(*wlp_tx_hdr)); + wtx->wlp_tx_hdr = wlp_tx_hdr; + BUG_ON(skb_headroom(skb) < sizeof(*untd_hdr_cmp)); + untd_hdr_cmp = (void *) __skb_push(skb, sizeof(*untd_hdr_cmp)); + + untd_hdr_set_type(&untd_hdr_cmp->hdr, i1480u_PKT_FRAG_CMP); + untd_hdr_set_rx_tx(&untd_hdr_cmp->hdr, 0); + untd_hdr_cmp->hdr.len = cpu_to_le16(skb->len - sizeof(*untd_hdr_cmp)); + untd_hdr_cmp->padding = 0; + return 0; +} + + +/** + * Given a skb to transmit, massage it to become palatable for the TX pipe + * + * This will break the buffer in chunks smaller than + * i1480u_MAX_FRG_SIZE and add proper headers to each. + * + * 1st header \ + * i1480 tx header | fragment 1 + * fragment data / + * nxt header \ fragment 2 + * fragment data / + * .. + * .. + * last header \ fragment 3 + * last fragment data / + * + * Each fragment will be always smaller or equal to i1480u_MAX_FRG_SIZE. + * + * If the first fragment is smaller than i1480u_MAX_FRG_SIZE, then the + * following is composed: + * + * complete header \ + * i1480 tx header | single fragment + * packet data / + * + * We were going to use s/g support, but because the interface is + * synch and at the end there is plenty of overhead to do it, it + * didn't seem that worth for data that is going to be smaller than + * one page. + */ +static +struct i1480u_tx *i1480u_tx_create(struct i1480u *i1480u, + struct sk_buff *skb, gfp_t gfp_mask) +{ + int result; + struct usb_endpoint_descriptor *epd; + int usb_pipe; + unsigned long flags; + + struct i1480u_tx *wtx; + const size_t pl_max_size = + i1480u_MAX_FRG_SIZE - sizeof(struct untd_hdr_cmp) + - sizeof(struct wlp_tx_hdr); + + wtx = kmalloc(sizeof(*wtx), gfp_mask); + if (wtx == NULL) + goto error_wtx_alloc; + wtx->urb = usb_alloc_urb(0, gfp_mask); + if (wtx->urb == NULL) + goto error_urb_alloc; + epd = &i1480u->usb_iface->cur_altsetting->endpoint[2].desc; + usb_pipe = usb_sndbulkpipe(i1480u->usb_dev, epd->bEndpointAddress); + /* Fits in a single complete packet or need to split? */ + if (skb->len > pl_max_size) { + result = i1480u_tx_create_n(wtx, skb, gfp_mask); + if (result < 0) + goto error_create; + usb_fill_bulk_urb(wtx->urb, i1480u->usb_dev, usb_pipe, + wtx->buf, wtx->buf_size, i1480u_tx_cb, wtx); + } else { + result = i1480u_tx_create_1(wtx, skb, gfp_mask); + if (result < 0) + goto error_create; + usb_fill_bulk_urb(wtx->urb, i1480u->usb_dev, usb_pipe, + skb->data, skb->len, i1480u_tx_cb, wtx); + } + spin_lock_irqsave(&i1480u->tx_list_lock, flags); + list_add(&wtx->list_node, &i1480u->tx_list); + spin_unlock_irqrestore(&i1480u->tx_list_lock, flags); + return wtx; + +error_create: + kfree(wtx->urb); +error_urb_alloc: + kfree(wtx); +error_wtx_alloc: + return NULL; +} + +/** + * Actual fragmentation and transmission of frame + * + * @wlp: WLP substack data structure + * @skb: To be transmitted + * @dst: Device address of destination + * @returns: 0 on success, <0 on failure + * + * This function can also be called directly (not just from + * hard_start_xmit), so we also check here if the interface is up before + * taking sending anything. + */ +int i1480u_xmit_frame(struct wlp *wlp, struct sk_buff *skb, + struct uwb_dev_addr *dst) +{ + int result = -ENXIO; + struct i1480u *i1480u = container_of(wlp, struct i1480u, wlp); + struct device *dev = &i1480u->usb_iface->dev; + struct net_device *net_dev = i1480u->net_dev; + struct i1480u_tx *wtx; + struct wlp_tx_hdr *wlp_tx_hdr; + static unsigned char dev_bcast[2] = { 0xff, 0xff }; +#if 0 + int lockup = 50; +#endif + + d_fnstart(6, dev, "(skb %p (%u), net_dev %p)\n", skb, skb->len, + net_dev); + BUG_ON(i1480u->wlp.rc == NULL); + if ((net_dev->flags & IFF_UP) == 0) + goto out; + result = -EBUSY; + if (atomic_read(&i1480u->tx_inflight.count) >= i1480u->tx_inflight.max) { + if (d_test(2) && printk_ratelimit()) + d_printf(2, dev, "Max frames in flight " + "stopping queue.\n"); + netif_stop_queue(net_dev); + goto error_max_inflight; + } + result = -ENOMEM; + wtx = i1480u_tx_create(i1480u, skb, GFP_ATOMIC); + if (unlikely(wtx == NULL)) { + if (printk_ratelimit()) + dev_err(dev, "TX: no memory for WLP TX URB," + "dropping packet (in flight %d)\n", + atomic_read(&i1480u->tx_inflight.count)); + netif_stop_queue(net_dev); + goto error_wtx_alloc; + } + wtx->i1480u = i1480u; + /* Fill out the i1480 header; @i1480u->def_tx_hdr read without + * locking. We do so because they are kind of orthogonal to + * each other (and thus not changed in an atomic batch). + * The ETH header is right after the WLP TX header. */ + wlp_tx_hdr = wtx->wlp_tx_hdr; + *wlp_tx_hdr = i1480u->options.def_tx_hdr; + wlp_tx_hdr->dstaddr = *dst; + if (!memcmp(&wlp_tx_hdr->dstaddr, dev_bcast, sizeof(dev_bcast)) + && (wlp_tx_hdr_delivery_id_type(wlp_tx_hdr) & WLP_DRP)) { + /*Broadcast message directed to DRP host. Send as best effort + * on PCA. */ + wlp_tx_hdr_set_delivery_id_type(wlp_tx_hdr, i1480u->options.pca_base_priority); + } + +#if 0 + dev_info(dev, "TX delivering skb -> USB, %zu bytes\n", skb->len); + dump_bytes(dev, skb->data, skb->len > 72 ? 72 : skb->len); +#endif +#if 0 + /* simulates a device lockup after every lockup# packets */ + if (lockup && ((i1480u->stats.tx_packets + 1) % lockup) == 0) { + /* Simulate a dropped transmit interrupt */ + net_dev->trans_start = jiffies; + netif_stop_queue(net_dev); + dev_err(dev, "Simulate lockup at %ld\n", jiffies); + return result; + } +#endif + + result = usb_submit_urb(wtx->urb, GFP_ATOMIC); /* Go baby */ + if (result < 0) { + dev_err(dev, "TX: cannot submit URB: %d\n", result); + /* We leave the freeing of skb to calling function */ + wtx->skb = NULL; + goto error_tx_urb_submit; + } + atomic_inc(&i1480u->tx_inflight.count); + net_dev->trans_start = jiffies; + d_fnend(6, dev, "(skb %p (%u), net_dev %p) = %d\n", skb, skb->len, + net_dev, result); + return result; + +error_tx_urb_submit: + i1480u_tx_destroy(i1480u, wtx); +error_wtx_alloc: +error_max_inflight: +out: + d_fnend(6, dev, "(skb %p (%u), net_dev %p) = %d\n", skb, skb->len, + net_dev, result); + return result; +} + + +/** + * Transmit an skb Called when an skbuf has to be transmitted + * + * The skb is first passed to WLP substack to ensure this is a valid + * frame. If valid the device address of destination will be filled and + * the WLP header prepended to the skb. If this step fails we fake sending + * the frame, if we return an error the network stack will just keep trying. + * + * Broadcast frames inside a WSS needs to be treated special as multicast is + * not supported. A broadcast frame is sent as unicast to each member of the + * WSS - this is done by the WLP substack when it finds a broadcast frame. + * So, we test if the WLP substack took over the skb and only transmit it + * if it has not (been taken over). + * + * @net_dev->xmit_lock is held + */ +int i1480u_hard_start_xmit(struct sk_buff *skb, struct net_device *net_dev) +{ + int result; + struct i1480u *i1480u = netdev_priv(net_dev); + struct device *dev = &i1480u->usb_iface->dev; + struct uwb_dev_addr dst; + + d_fnstart(6, dev, "(skb %p (%u), net_dev %p)\n", skb, skb->len, + net_dev); + BUG_ON(i1480u->wlp.rc == NULL); + if ((net_dev->flags & IFF_UP) == 0) + goto error; + result = wlp_prepare_tx_frame(dev, &i1480u->wlp, skb, &dst); + if (result < 0) { + dev_err(dev, "WLP verification of TX frame failed (%d). " + "Dropping packet.\n", result); + goto error; + } else if (result == 1) { + d_printf(6, dev, "WLP will transmit frame. \n"); + /* trans_start time will be set when WLP actually transmits + * the frame */ + goto out; + } + d_printf(6, dev, "Transmitting frame. \n"); + result = i1480u_xmit_frame(&i1480u->wlp, skb, &dst); + if (result < 0) { + dev_err(dev, "Frame TX failed (%d).\n", result); + goto error; + } + d_fnend(6, dev, "(skb %p (%u), net_dev %p) = %d\n", skb, skb->len, + net_dev, result); + return NETDEV_TX_OK; +error: + dev_kfree_skb_any(skb); + i1480u->stats.tx_dropped++; +out: + d_fnend(6, dev, "(skb %p (%u), net_dev %p) = %d\n", skb, skb->len, + net_dev, result); + return NETDEV_TX_OK; +} + + +/** + * Called when a pkt transmission doesn't complete in a reasonable period + * Device reset may sleep - do it outside of interrupt context (delayed) + */ +void i1480u_tx_timeout(struct net_device *net_dev) +{ + struct i1480u *i1480u = netdev_priv(net_dev); + + wlp_reset_all(&i1480u->wlp); +} + + +void i1480u_tx_release(struct i1480u *i1480u) +{ + unsigned long flags; + struct i1480u_tx *wtx, *next; + int count = 0, empty; + + spin_lock_irqsave(&i1480u->tx_list_lock, flags); + list_for_each_entry_safe(wtx, next, &i1480u->tx_list, list_node) { + count++; + usb_unlink_urb(wtx->urb); + } + spin_unlock_irqrestore(&i1480u->tx_list_lock, flags); + count = count*10; /* i1480ut 200ms per unlinked urb (intervals of 20ms) */ + /* + * We don't like this sollution too much (dirty as it is), but + * it is cheaper than putting a refcount on each i1480u_tx and + * i1480uting for all of them to go away... + * + * Called when no more packets can be added to tx_list + * so can i1480ut for it to be empty. + */ + while (1) { + spin_lock_irqsave(&i1480u->tx_list_lock, flags); + empty = list_empty(&i1480u->tx_list); + spin_unlock_irqrestore(&i1480u->tx_list_lock, flags); + if (empty) + break; + count--; + BUG_ON(count == 0); + msleep(20); + } +} |