diff options
Diffstat (limited to 'drivers/uwb/wlp/eda.c')
| -rw-r--r-- | drivers/uwb/wlp/eda.c | 415 |
1 files changed, 0 insertions, 415 deletions
diff --git a/drivers/uwb/wlp/eda.c b/drivers/uwb/wlp/eda.c deleted file mode 100644 index 086fc0cf9401..000000000000 --- a/drivers/uwb/wlp/eda.c +++ /dev/null @@ -1,415 +0,0 @@ -/* - * WUSB Wire Adapter: WLP interface - * Ethernet to device address cache - * - * Copyright (C) 2005-2006 Intel Corporation - * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License version - * 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA - * 02110-1301, USA. - * - * - * We need to be able to map ethernet addresses to device addresses - * and back because there is not explicit relationship between the eth - * addresses used in the ETH frames and the device addresses (no, it - * would not have been simpler to force as ETH address the MBOA MAC - * address...no, not at all :). - * - * A device has one MBOA MAC address and one device address. It is possible - * for a device to have more than one virtual MAC address (although a - * virtual address can be the same as the MBOA MAC address). The device - * address is guaranteed to be unique among the devices in the extended - * beacon group (see ECMA 17.1.1). We thus use the device address as index - * to this cache. We do allow searching based on virtual address as this - * is how Ethernet frames will be addressed. - * - * We need to support virtual EUI-48. Although, right now the virtual - * EUI-48 will always be the same as the MAC SAP address. The EDA cache - * entry thus contains a MAC SAP address as well as the virtual address - * (used to map the network stack address to a neighbor). When we move - * to support more than one virtual MAC on a host then this organization - * will have to change. Perhaps a neighbor has a list of WSSs, each with a - * tag and virtual EUI-48. - * - * On data transmission - * it is used to determine if the neighbor is connected and what WSS it - * belongs to. With this we know what tag to add to the WLP frame. Storing - * the WSS in the EDA cache may be overkill because we only support one - * WSS. Hopefully we will support more than one WSS at some point. - * On data reception it is used to determine the WSS based on - * the tag and address of the transmitting neighbor. - */ - -#include <linux/netdevice.h> -#include <linux/etherdevice.h> -#include <linux/slab.h> -#include <linux/wlp.h> -#include "wlp-internal.h" - - -/* FIXME: cache is not purged, only on device close */ - -/* FIXME: does not scale, change to dynamic array */ - -/* - * Initialize the EDA cache - * - * @returns 0 if ok, < 0 errno code on error - * - * Call when the interface is being brought up - * - * NOTE: Keep it as a separate function as the implementation will - * change and be more complex. - */ -void wlp_eda_init(struct wlp_eda *eda) -{ - INIT_LIST_HEAD(&eda->cache); - spin_lock_init(&eda->lock); -} - -/* - * Release the EDA cache - * - * @returns 0 if ok, < 0 errno code on error - * - * Called when the interface is brought down - */ -void wlp_eda_release(struct wlp_eda *eda) -{ - unsigned long flags; - struct wlp_eda_node *itr, *next; - - spin_lock_irqsave(&eda->lock, flags); - list_for_each_entry_safe(itr, next, &eda->cache, list_node) { - list_del(&itr->list_node); - kfree(itr); - } - spin_unlock_irqrestore(&eda->lock, flags); -} - -/* - * Add an address mapping - * - * @returns 0 if ok, < 0 errno code on error - * - * An address mapping is initially created when the neighbor device is seen - * for the first time (it is "onair"). At this time the neighbor is not - * connected or associated with a WSS so we only populate the Ethernet and - * Device address fields. - * - */ -int wlp_eda_create_node(struct wlp_eda *eda, - const unsigned char eth_addr[ETH_ALEN], - const struct uwb_dev_addr *dev_addr) -{ - int result = 0; - struct wlp_eda_node *itr; - unsigned long flags; - - BUG_ON(dev_addr == NULL || eth_addr == NULL); - spin_lock_irqsave(&eda->lock, flags); - list_for_each_entry(itr, &eda->cache, list_node) { - if (!memcmp(&itr->dev_addr, dev_addr, sizeof(itr->dev_addr))) { - printk(KERN_ERR "EDA cache already contains entry " - "for neighbor %02x:%02x\n", - dev_addr->data[1], dev_addr->data[0]); - result = -EEXIST; - goto out_unlock; - } - } - itr = kzalloc(sizeof(*itr), GFP_ATOMIC); - if (itr != NULL) { - memcpy(itr->eth_addr, eth_addr, sizeof(itr->eth_addr)); - itr->dev_addr = *dev_addr; - list_add(&itr->list_node, &eda->cache); - } else - result = -ENOMEM; -out_unlock: - spin_unlock_irqrestore(&eda->lock, flags); - return result; -} - -/* - * Remove entry from EDA cache - * - * This is done when the device goes off air. - */ -void wlp_eda_rm_node(struct wlp_eda *eda, const struct uwb_dev_addr *dev_addr) -{ - struct wlp_eda_node *itr, *next; - unsigned long flags; - - spin_lock_irqsave(&eda->lock, flags); - list_for_each_entry_safe(itr, next, &eda->cache, list_node) { - if (!memcmp(&itr->dev_addr, dev_addr, sizeof(itr->dev_addr))) { - list_del(&itr->list_node); - kfree(itr); - break; - } - } - spin_unlock_irqrestore(&eda->lock, flags); -} - -/* - * Update an address mapping - * - * @returns 0 if ok, < 0 errno code on error - */ -int wlp_eda_update_node(struct wlp_eda *eda, - const struct uwb_dev_addr *dev_addr, - struct wlp_wss *wss, - const unsigned char virt_addr[ETH_ALEN], - const u8 tag, const enum wlp_wss_connect state) -{ - int result = -ENOENT; - struct wlp_eda_node *itr; - unsigned long flags; - - spin_lock_irqsave(&eda->lock, flags); - list_for_each_entry(itr, &eda->cache, list_node) { - if (!memcmp(&itr->dev_addr, dev_addr, sizeof(itr->dev_addr))) { - /* Found it, update it */ - itr->wss = wss; - memcpy(itr->virt_addr, virt_addr, - sizeof(itr->virt_addr)); - itr->tag = tag; - itr->state = state; - result = 0; - goto out_unlock; - } - } - /* Not found */ -out_unlock: - spin_unlock_irqrestore(&eda->lock, flags); - return result; -} - -/* - * Update only state field of an address mapping - * - * @returns 0 if ok, < 0 errno code on error - */ -int wlp_eda_update_node_state(struct wlp_eda *eda, - const struct uwb_dev_addr *dev_addr, - const enum wlp_wss_connect state) -{ - int result = -ENOENT; - struct wlp_eda_node *itr; - unsigned long flags; - - spin_lock_irqsave(&eda->lock, flags); - list_for_each_entry(itr, &eda->cache, list_node) { - if (!memcmp(&itr->dev_addr, dev_addr, sizeof(itr->dev_addr))) { - /* Found it, update it */ - itr->state = state; - result = 0; - goto out_unlock; - } - } - /* Not found */ -out_unlock: - spin_unlock_irqrestore(&eda->lock, flags); - return result; -} - -/* - * Return contents of EDA cache entry - * - * @dev_addr: index to EDA cache - * @eda_entry: pointer to where contents of EDA cache will be copied - */ -int wlp_copy_eda_node(struct wlp_eda *eda, struct uwb_dev_addr *dev_addr, - struct wlp_eda_node *eda_entry) -{ - int result = -ENOENT; - struct wlp_eda_node *itr; - unsigned long flags; - - spin_lock_irqsave(&eda->lock, flags); - list_for_each_entry(itr, &eda->cache, list_node) { - if (!memcmp(&itr->dev_addr, dev_addr, sizeof(itr->dev_addr))) { - *eda_entry = *itr; - result = 0; - goto out_unlock; - } - } - /* Not found */ -out_unlock: - spin_unlock_irqrestore(&eda->lock, flags); - return result; -} - -/* - * Execute function for every element in the cache - * - * @function: function to execute on element of cache (must be atomic) - * @priv: private data of function - * @returns: result of first function that failed, or last function - * executed if no function failed. - * - * Stop executing when function returns error for any element in cache. - * - * IMPORTANT: We are using a spinlock here: the function executed on each - * element has to be atomic. - */ -int wlp_eda_for_each(struct wlp_eda *eda, wlp_eda_for_each_f function, - void *priv) -{ - int result = 0; - struct wlp *wlp = container_of(eda, struct wlp, eda); - struct wlp_eda_node *entry; - unsigned long flags; - - spin_lock_irqsave(&eda->lock, flags); - list_for_each_entry(entry, &eda->cache, list_node) { - result = (*function)(wlp, entry, priv); - if (result < 0) - break; - } - spin_unlock_irqrestore(&eda->lock, flags); - return result; -} - -/* - * Execute function for single element in the cache (return dev addr) - * - * @virt_addr: index into EDA cache used to determine which element to - * execute the function on - * @dev_addr: device address of element in cache will be returned using - * @dev_addr - * @function: function to execute on element of cache (must be atomic) - * @priv: private data of function - * @returns: result of function - * - * IMPORTANT: We are using a spinlock here: the function executed on the - * element has to be atomic. - */ -int wlp_eda_for_virtual(struct wlp_eda *eda, - const unsigned char virt_addr[ETH_ALEN], - struct uwb_dev_addr *dev_addr, - wlp_eda_for_each_f function, - void *priv) -{ - int result = 0; - struct wlp *wlp = container_of(eda, struct wlp, eda); - struct wlp_eda_node *itr; - unsigned long flags; - int found = 0; - - spin_lock_irqsave(&eda->lock, flags); - list_for_each_entry(itr, &eda->cache, list_node) { - if (!memcmp(itr->virt_addr, virt_addr, - sizeof(itr->virt_addr))) { - result = (*function)(wlp, itr, priv); - *dev_addr = itr->dev_addr; - found = 1; - break; - } - } - if (!found) - result = -ENODEV; - spin_unlock_irqrestore(&eda->lock, flags); - return result; -} - -static const char *__wlp_wss_connect_state[] = { "WLP_WSS_UNCONNECTED", - "WLP_WSS_CONNECTED", - "WLP_WSS_CONNECT_FAILED", -}; - -static const char *wlp_wss_connect_state_str(unsigned id) -{ - if (id >= ARRAY_SIZE(__wlp_wss_connect_state)) - return "unknown WSS connection state"; - return __wlp_wss_connect_state[id]; -} - -/* - * View EDA cache from user space - * - * A debugging feature to give user visibility into the EDA cache. Also - * used to display members of WSS to user (called from wlp_wss_members_show()) - */ -ssize_t wlp_eda_show(struct wlp *wlp, char *buf) -{ - ssize_t result = 0; - struct wlp_eda_node *entry; - unsigned long flags; - struct wlp_eda *eda = &wlp->eda; - spin_lock_irqsave(&eda->lock, flags); - result = scnprintf(buf, PAGE_SIZE, "#eth_addr dev_addr wss_ptr " - "tag state virt_addr\n"); - list_for_each_entry(entry, &eda->cache, list_node) { - result += scnprintf(buf + result, PAGE_SIZE - result, - "%pM %02x:%02x %p 0x%02x %s %pM\n", - entry->eth_addr, - entry->dev_addr.data[1], - entry->dev_addr.data[0], entry->wss, - entry->tag, - wlp_wss_connect_state_str(entry->state), - entry->virt_addr); - if (result >= PAGE_SIZE) - break; - } - spin_unlock_irqrestore(&eda->lock, flags); - return result; -} -EXPORT_SYMBOL_GPL(wlp_eda_show); - -/* - * Add new EDA cache entry based on user input in sysfs - * - * Should only be used for debugging. - * - * The WSS is assumed to be the only WSS supported. This needs to be - * redesigned when we support more than one WSS. - */ -ssize_t wlp_eda_store(struct wlp *wlp, const char *buf, size_t size) -{ - ssize_t result; - struct wlp_eda *eda = &wlp->eda; - u8 eth_addr[6]; - struct uwb_dev_addr dev_addr; - u8 tag; - unsigned state; - - result = sscanf(buf, "%02hhx:%02hhx:%02hhx:%02hhx:%02hhx:%02hhx " - "%02hhx:%02hhx %02hhx %u\n", - ð_addr[0], ð_addr[1], - ð_addr[2], ð_addr[3], - ð_addr[4], ð_addr[5], - &dev_addr.data[1], &dev_addr.data[0], &tag, &state); - switch (result) { - case 6: /* no dev addr specified -- remove entry NOT IMPLEMENTED */ - /*result = wlp_eda_rm(eda, eth_addr, &dev_addr);*/ - result = -ENOSYS; - break; - case 10: - state = state >= 1 ? 1 : 0; - result = wlp_eda_create_node(eda, eth_addr, &dev_addr); - if (result < 0 && result != -EEXIST) - goto error; - /* Set virtual addr to be same as MAC */ - result = wlp_eda_update_node(eda, &dev_addr, &wlp->wss, - eth_addr, tag, state); - if (result < 0) - goto error; - break; - default: /* bad format */ - result = -EINVAL; - } -error: - return result < 0 ? result : size; -} -EXPORT_SYMBOL_GPL(wlp_eda_store); |