diff options
Diffstat (limited to 'drivers/video/gbefb.c')
| -rw-r--r-- | drivers/video/gbefb.c | 1280 |
1 files changed, 1280 insertions, 0 deletions
diff --git a/drivers/video/gbefb.c b/drivers/video/gbefb.c new file mode 100644 index 000000000000..2a023282d7a3 --- /dev/null +++ b/drivers/video/gbefb.c @@ -0,0 +1,1280 @@ +/* + * SGI GBE frame buffer driver + * + * Copyright (C) 1999 Silicon Graphics, Inc. - Jeffrey Newquist + * Copyright (C) 2002 Vivien Chappelier <vivien.chappelier@linux-mips.org> + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file COPYING in the main directory of this archive for + * more details. + */ + +#include <linux/config.h> +#include <linux/delay.h> +#include <linux/device.h> +#include <linux/dma-mapping.h> +#include <linux/errno.h> +#include <linux/fb.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/kernel.h> +#include <linux/mm.h> +#include <linux/module.h> + +#ifdef CONFIG_X86 +#include <asm/mtrr.h> +#endif +#ifdef CONFIG_MIPS +#include <asm/addrspace.h> +#endif +#include <asm/byteorder.h> +#include <asm/io.h> +#include <asm/tlbflush.h> + +#include <video/gbe.h> + +static struct sgi_gbe *gbe; + +struct gbefb_par { + struct fb_var_screeninfo var; + struct gbe_timing_info timing; + int valid; +}; + +#ifdef CONFIG_SGI_IP32 +#define GBE_BASE 0x16000000 /* SGI O2 */ +#endif + +#ifdef CONFIG_X86_VISWS +#define GBE_BASE 0xd0000000 /* SGI Visual Workstation */ +#endif + +/* macro for fastest write-though access to the framebuffer */ +#ifdef CONFIG_MIPS +#ifdef CONFIG_CPU_R10000 +#define pgprot_fb(_prot) (((_prot) & (~_CACHE_MASK)) | _CACHE_UNCACHED_ACCELERATED) +#else +#define pgprot_fb(_prot) (((_prot) & (~_CACHE_MASK)) | _CACHE_CACHABLE_NO_WA) +#endif +#endif +#ifdef CONFIG_X86 +#define pgprot_fb(_prot) ((_prot) | _PAGE_PCD) +#endif + +/* + * RAM we reserve for the frame buffer. This defines the maximum screen + * size + */ +#if CONFIG_FB_GBE_MEM > 8 +#error GBE Framebuffer cannot use more than 8MB of memory +#endif + +#define TILE_SHIFT 16 +#define TILE_SIZE (1 << TILE_SHIFT) +#define TILE_MASK (TILE_SIZE - 1) + +static unsigned int gbe_mem_size = CONFIG_FB_GBE_MEM * 1024*1024; +static void *gbe_mem; +static dma_addr_t gbe_dma_addr; +unsigned long gbe_mem_phys; + +static struct { + uint16_t *cpu; + dma_addr_t dma; +} gbe_tiles; + +static int gbe_revision; + +static int ypan, ywrap; + +static uint32_t pseudo_palette[256]; + +static char *mode_option __initdata = NULL; + +/* default CRT mode */ +static struct fb_var_screeninfo default_var_CRT __initdata = { + /* 640x480, 60 Hz, Non-Interlaced (25.175 MHz dotclock) */ + .xres = 640, + .yres = 480, + .xres_virtual = 640, + .yres_virtual = 480, + .xoffset = 0, + .yoffset = 0, + .bits_per_pixel = 8, + .grayscale = 0, + .red = { 0, 8, 0 }, + .green = { 0, 8, 0 }, + .blue = { 0, 8, 0 }, + .transp = { 0, 0, 0 }, + .nonstd = 0, + .activate = 0, + .height = -1, + .width = -1, + .accel_flags = 0, + .pixclock = 39722, /* picoseconds */ + .left_margin = 48, + .right_margin = 16, + .upper_margin = 33, + .lower_margin = 10, + .hsync_len = 96, + .vsync_len = 2, + .sync = 0, + .vmode = FB_VMODE_NONINTERLACED, +}; + +/* default LCD mode */ +static struct fb_var_screeninfo default_var_LCD __initdata = { + /* 1600x1024, 8 bpp */ + .xres = 1600, + .yres = 1024, + .xres_virtual = 1600, + .yres_virtual = 1024, + .xoffset = 0, + .yoffset = 0, + .bits_per_pixel = 8, + .grayscale = 0, + .red = { 0, 8, 0 }, + .green = { 0, 8, 0 }, + .blue = { 0, 8, 0 }, + .transp = { 0, 0, 0 }, + .nonstd = 0, + .activate = 0, + .height = -1, + .width = -1, + .accel_flags = 0, + .pixclock = 9353, + .left_margin = 20, + .right_margin = 30, + .upper_margin = 37, + .lower_margin = 3, + .hsync_len = 20, + .vsync_len = 3, + .sync = 0, + .vmode = FB_VMODE_NONINTERLACED +}; + +/* default modedb mode */ +/* 640x480, 60 Hz, Non-Interlaced (25.172 MHz dotclock) */ +static struct fb_videomode default_mode_CRT __initdata = { + .refresh = 60, + .xres = 640, + .yres = 480, + .pixclock = 39722, + .left_margin = 48, + .right_margin = 16, + .upper_margin = 33, + .lower_margin = 10, + .hsync_len = 96, + .vsync_len = 2, + .sync = 0, + .vmode = FB_VMODE_NONINTERLACED, +}; +/* 1600x1024 SGI flatpanel 1600sw */ +static struct fb_videomode default_mode_LCD __initdata = { + /* 1600x1024, 8 bpp */ + .xres = 1600, + .yres = 1024, + .pixclock = 9353, + .left_margin = 20, + .right_margin = 30, + .upper_margin = 37, + .lower_margin = 3, + .hsync_len = 20, + .vsync_len = 3, + .vmode = FB_VMODE_NONINTERLACED, +}; + +struct fb_videomode *default_mode = &default_mode_CRT; +struct fb_var_screeninfo *default_var = &default_var_CRT; + +static int flat_panel_enabled = 0; + +static void gbe_reset(void) +{ + /* Turn on dotclock PLL */ + gbe->ctrlstat = 0x300aa000; +} + + +/* + * Function: gbe_turn_off + * Parameters: (None) + * Description: This should turn off the monitor and gbe. This is used + * when switching between the serial console and the graphics + * console. + */ + +void gbe_turn_off(void) +{ + int i; + unsigned int val, x, y, vpixen_off; + + /* check if pixel counter is on */ + val = gbe->vt_xy; + if (GET_GBE_FIELD(VT_XY, FREEZE, val) == 1) + return; + + /* turn off DMA */ + val = gbe->ovr_control; + SET_GBE_FIELD(OVR_CONTROL, OVR_DMA_ENABLE, val, 0); + gbe->ovr_control = val; + udelay(1000); + val = gbe->frm_control; + SET_GBE_FIELD(FRM_CONTROL, FRM_DMA_ENABLE, val, 0); + gbe->frm_control = val; + udelay(1000); + val = gbe->did_control; + SET_GBE_FIELD(DID_CONTROL, DID_DMA_ENABLE, val, 0); + gbe->did_control = val; + udelay(1000); + + /* We have to wait through two vertical retrace periods before + * the pixel DMA is turned off for sure. */ + for (i = 0; i < 10000; i++) { + val = gbe->frm_inhwctrl; + if (GET_GBE_FIELD(FRM_INHWCTRL, FRM_DMA_ENABLE, val)) { + udelay(10); + } else { + val = gbe->ovr_inhwctrl; + if (GET_GBE_FIELD(OVR_INHWCTRL, OVR_DMA_ENABLE, val)) { + udelay(10); + } else { + val = gbe->did_inhwctrl; + if (GET_GBE_FIELD(DID_INHWCTRL, DID_DMA_ENABLE, val)) { + udelay(10); + } else + break; + } + } + } + if (i == 10000) + printk(KERN_ERR "gbefb: turn off DMA timed out\n"); + + /* wait for vpixen_off */ + val = gbe->vt_vpixen; + vpixen_off = GET_GBE_FIELD(VT_VPIXEN, VPIXEN_OFF, val); + + for (i = 0; i < 100000; i++) { + val = gbe->vt_xy; + x = GET_GBE_FIELD(VT_XY, X, val); + y = GET_GBE_FIELD(VT_XY, Y, val); + if (y < vpixen_off) + break; + udelay(1); + } + if (i == 100000) + printk(KERN_ERR + "gbefb: wait for vpixen_off timed out\n"); + for (i = 0; i < 10000; i++) { + val = gbe->vt_xy; + x = GET_GBE_FIELD(VT_XY, X, val); + y = GET_GBE_FIELD(VT_XY, Y, val); + if (y > vpixen_off) + break; + udelay(1); + } + if (i == 10000) + printk(KERN_ERR "gbefb: wait for vpixen_off timed out\n"); + + /* turn off pixel counter */ + val = 0; + SET_GBE_FIELD(VT_XY, FREEZE, val, 1); + gbe->vt_xy = val; + udelay(10000); + for (i = 0; i < 10000; i++) { + val = gbe->vt_xy; + if (GET_GBE_FIELD(VT_XY, FREEZE, val) != 1) + udelay(10); + else + break; + } + if (i == 10000) + printk(KERN_ERR "gbefb: turn off pixel clock timed out\n"); + + /* turn off dot clock */ + val = gbe->dotclock; + SET_GBE_FIELD(DOTCLK, RUN, val, 0); + gbe->dotclock = val; + udelay(10000); + for (i = 0; i < 10000; i++) { + val = gbe->dotclock; + if (GET_GBE_FIELD(DOTCLK, RUN, val)) + udelay(10); + else + break; + } + if (i == 10000) + printk(KERN_ERR "gbefb: turn off dotclock timed out\n"); + + /* reset the frame DMA FIFO */ + val = gbe->frm_size_tile; + SET_GBE_FIELD(FRM_SIZE_TILE, FRM_FIFO_RESET, val, 1); + gbe->frm_size_tile = val; + SET_GBE_FIELD(FRM_SIZE_TILE, FRM_FIFO_RESET, val, 0); + gbe->frm_size_tile = val; +} + +static void gbe_turn_on(void) +{ + unsigned int val, i; + + /* + * Check if pixel counter is off, for unknown reason this + * code hangs Visual Workstations + */ + if (gbe_revision < 2) { + val = gbe->vt_xy; + if (GET_GBE_FIELD(VT_XY, FREEZE, val) == 0) + return; + } + + /* turn on dot clock */ + val = gbe->dotclock; + SET_GBE_FIELD(DOTCLK, RUN, val, 1); + gbe->dotclock = val; + udelay(10000); + for (i = 0; i < 10000; i++) { + val = gbe->dotclock; + if (GET_GBE_FIELD(DOTCLK, RUN, val) != 1) + udelay(10); + else + break; + } + if (i == 10000) + printk(KERN_ERR "gbefb: turn on dotclock timed out\n"); + + /* turn on pixel counter */ + val = 0; + SET_GBE_FIELD(VT_XY, FREEZE, val, 0); + gbe->vt_xy = val; + udelay(10000); + for (i = 0; i < 10000; i++) { + val = gbe->vt_xy; + if (GET_GBE_FIELD(VT_XY, FREEZE, val)) + udelay(10); + else + break; + } + if (i == 10000) + printk(KERN_ERR "gbefb: turn on pixel clock timed out\n"); + + /* turn on DMA */ + val = gbe->frm_control; + SET_GBE_FIELD(FRM_CONTROL, FRM_DMA_ENABLE, val, 1); + gbe->frm_control = val; + udelay(1000); + for (i = 0; i < 10000; i++) { + val = gbe->frm_inhwctrl; + if (GET_GBE_FIELD(FRM_INHWCTRL, FRM_DMA_ENABLE, val) != 1) + udelay(10); + else + break; + } + if (i == 10000) + printk(KERN_ERR "gbefb: turn on DMA timed out\n"); +} + +/* + * Blank the display. + */ +static int gbefb_blank(int blank, struct fb_info *info) +{ + /* 0 unblank, 1 blank, 2 no vsync, 3 no hsync, 4 off */ + switch (blank) { + case FB_BLANK_UNBLANK: /* unblank */ + gbe_turn_on(); + break; + + case FB_BLANK_NORMAL: /* blank */ + gbe_turn_off(); + break; + + default: + /* Nothing */ + break; + } + return 0; +} + +/* + * Setup flatpanel related registers. + */ +static void gbefb_setup_flatpanel(struct gbe_timing_info *timing) +{ + int fp_wid, fp_hgt, fp_vbs, fp_vbe; + u32 outputVal = 0; + + SET_GBE_FIELD(VT_FLAGS, HDRV_INVERT, outputVal, + (timing->flags & FB_SYNC_HOR_HIGH_ACT) ? 0 : 1); + SET_GBE_FIELD(VT_FLAGS, VDRV_INVERT, outputVal, + (timing->flags & FB_SYNC_VERT_HIGH_ACT) ? 0 : 1); + gbe->vt_flags = outputVal; + + /* Turn on the flat panel */ + fp_wid = 1600; + fp_hgt = 1024; + fp_vbs = 0; + fp_vbe = 1600; + timing->pll_m = 4; + timing->pll_n = 1; + timing->pll_p = 0; + + outputVal = 0; + SET_GBE_FIELD(FP_DE, ON, outputVal, fp_vbs); + SET_GBE_FIELD(FP_DE, OFF, outputVal, fp_vbe); + gbe->fp_de = outputVal; + outputVal = 0; + SET_GBE_FIELD(FP_HDRV, OFF, outputVal, fp_wid); + gbe->fp_hdrv = outputVal; + outputVal = 0; + SET_GBE_FIELD(FP_VDRV, ON, outputVal, 1); + SET_GBE_FIELD(FP_VDRV, OFF, outputVal, fp_hgt + 1); + gbe->fp_vdrv = outputVal; +} + +struct gbe_pll_info { + int clock_rate; + int fvco_min; + int fvco_max; +}; + +static struct gbe_pll_info gbe_pll_table[2] = { + { 20, 80, 220 }, + { 27, 80, 220 }, +}; + +static int compute_gbe_timing(struct fb_var_screeninfo *var, + struct gbe_timing_info *timing) +{ + int pll_m, pll_n, pll_p, error, best_m, best_n, best_p, best_error; + int pixclock; + struct gbe_pll_info *gbe_pll; + + if (gbe_revision < 2) + gbe_pll = &gbe_pll_table[0]; + else + gbe_pll = &gbe_pll_table[1]; + + /* Determine valid resolution and timing + * GBE crystal runs at 20Mhz or 27Mhz + * pll_m, pll_n, pll_p define the following frequencies + * fvco = pll_m * 20Mhz / pll_n + * fout = fvco / (2**pll_p) */ + best_error = 1000000000; + best_n = best_m = best_p = 0; + for (pll_p = 0; pll_p < 4; pll_p++) + for (pll_m = 1; pll_m < 256; pll_m++) + for (pll_n = 1; pll_n < 64; pll_n++) { + pixclock = (1000000 / gbe_pll->clock_rate) * + (pll_n << pll_p) / pll_m; + + error = var->pixclock - pixclock; + + if (error < 0) + error = -error; + + if (error < best_error && + pll_m / pll_n > + gbe_pll->fvco_min / gbe_pll->clock_rate && + pll_m / pll_n < + gbe_pll->fvco_max / gbe_pll->clock_rate) { + best_error = error; + best_m = pll_m; + best_n = pll_n; + best_p = pll_p; + } + } + + if (!best_n || !best_m) + return -EINVAL; /* Resolution to high */ + + pixclock = (1000000 / gbe_pll->clock_rate) * + (best_n << best_p) / best_m; + + /* set video timing information */ + if (timing) { + timing->width = var->xres; + timing->height = var->yres; + timing->pll_m = best_m; + timing->pll_n = best_n; + timing->pll_p = best_p; + timing->cfreq = gbe_pll->clock_rate * 1000 * timing->pll_m / + (timing->pll_n << timing->pll_p); + timing->htotal = var->left_margin + var->xres + + var->right_margin + var->hsync_len; + timing->vtotal = var->upper_margin + var->yres + + var->lower_margin + var->vsync_len; + timing->fields_sec = 1000 * timing->cfreq / timing->htotal * + 1000 / timing->vtotal; + timing->hblank_start = var->xres; + timing->vblank_start = var->yres; + timing->hblank_end = timing->htotal; + timing->hsync_start = var->xres + var->right_margin + 1; + timing->hsync_end = timing->hsync_start + var->hsync_len; + timing->vblank_end = timing->vtotal; + timing->vsync_start = var->yres + var->lower_margin + 1; + timing->vsync_end = timing->vsync_start + var->vsync_len; + } + + return pixclock; +} + +static void gbe_set_timing_info(struct gbe_timing_info *timing) +{ + int temp; + unsigned int val; + + /* setup dot clock PLL */ + val = 0; + SET_GBE_FIELD(DOTCLK, M, val, timing->pll_m - 1); + SET_GBE_FIELD(DOTCLK, N, val, timing->pll_n - 1); + SET_GBE_FIELD(DOTCLK, P, val, timing->pll_p); + SET_GBE_FIELD(DOTCLK, RUN, val, 0); /* do not start yet */ + gbe->dotclock = val; + udelay(10000); + + /* setup pixel counter */ + val = 0; + SET_GBE_FIELD(VT_XYMAX, MAXX, val, timing->htotal); + SET_GBE_FIELD(VT_XYMAX, MAXY, val, timing->vtotal); + gbe->vt_xymax = val; + + /* setup video timing signals */ + val = 0; + SET_GBE_FIELD(VT_VSYNC, VSYNC_ON, val, timing->vsync_start); + SET_GBE_FIELD(VT_VSYNC, VSYNC_OFF, val, timing->vsync_end); + gbe->vt_vsync = val; + val = 0; + SET_GBE_FIELD(VT_HSYNC, HSYNC_ON, val, timing->hsync_start); + SET_GBE_FIELD(VT_HSYNC, HSYNC_OFF, val, timing->hsync_end); + gbe->vt_hsync = val; + val = 0; + SET_GBE_FIELD(VT_VBLANK, VBLANK_ON, val, timing->vblank_start); + SET_GBE_FIELD(VT_VBLANK, VBLANK_OFF, val, timing->vblank_end); + gbe->vt_vblank = val; + val = 0; + SET_GBE_FIELD(VT_HBLANK, HBLANK_ON, val, + timing->hblank_start - 5); + SET_GBE_FIELD(VT_HBLANK, HBLANK_OFF, val, + timing->hblank_end - 3); + gbe->vt_hblank = val; + + /* setup internal timing signals */ + val = 0; + SET_GBE_FIELD(VT_VCMAP, VCMAP_ON, val, timing->vblank_start); + SET_GBE_FIELD(VT_VCMAP, VCMAP_OFF, val, timing->vblank_end); + gbe->vt_vcmap = val; + val = 0; + SET_GBE_FIELD(VT_HCMAP, HCMAP_ON, val, timing->hblank_start); + SET_GBE_FIELD(VT_HCMAP, HCMAP_OFF, val, timing->hblank_end); + gbe->vt_hcmap = val; + + val = 0; + temp = timing->vblank_start - timing->vblank_end - 1; + if (temp > 0) + temp = -temp; + + if (flat_panel_enabled) + gbefb_setup_flatpanel(timing); + + SET_GBE_FIELD(DID_START_XY, DID_STARTY, val, (u32) temp); + if (timing->hblank_end >= 20) + SET_GBE_FIELD(DID_START_XY, DID_STARTX, val, + timing->hblank_end - 20); + else + SET_GBE_FIELD(DID_START_XY, DID_STARTX, val, + timing->htotal - (20 - timing->hblank_end)); + gbe->did_start_xy = val; + + val = 0; + SET_GBE_FIELD(CRS_START_XY, CRS_STARTY, val, (u32) (temp + 1)); + if (timing->hblank_end >= GBE_CRS_MAGIC) + SET_GBE_FIELD(CRS_START_XY, CRS_STARTX, val, + timing->hblank_end - GBE_CRS_MAGIC); + else + SET_GBE_FIELD(CRS_START_XY, CRS_STARTX, val, + timing->htotal - (GBE_CRS_MAGIC - + timing->hblank_end)); + gbe->crs_start_xy = val; + + val = 0; + SET_GBE_FIELD(VC_START_XY, VC_STARTY, val, (u32) temp); + SET_GBE_FIELD(VC_START_XY, VC_STARTX, val, timing->hblank_end - 4); + gbe->vc_start_xy = val; + + val = 0; + temp = timing->hblank_end - GBE_PIXEN_MAGIC_ON; + if (temp < 0) + temp += timing->htotal; /* allow blank to wrap around */ + + SET_GBE_FIELD(VT_HPIXEN, HPIXEN_ON, val, temp); + SET_GBE_FIELD(VT_HPIXEN, HPIXEN_OFF, val, + ((temp + timing->width - + GBE_PIXEN_MAGIC_OFF) % timing->htotal)); + gbe->vt_hpixen = val; + + val = 0; + SET_GBE_FIELD(VT_VPIXEN, VPIXEN_ON, val, timing->vblank_end); + SET_GBE_FIELD(VT_VPIXEN, VPIXEN_OFF, val, timing->vblank_start); + gbe->vt_vpixen = val; + + /* turn off sync on green */ + val = 0; + SET_GBE_FIELD(VT_FLAGS, SYNC_LOW, val, 1); + gbe->vt_flags = val; +} + +/* + * Set the hardware according to 'par'. + */ + +static int gbefb_set_par(struct fb_info *info) +{ + int i; + unsigned int val; + int wholeTilesX, partTilesX, maxPixelsPerTileX; + int height_pix; + int xpmax, ypmax; /* Monitor resolution */ + int bytesPerPixel; /* Bytes per pixel */ + struct gbefb_par *par = (struct gbefb_par *) info->par; + + compute_gbe_timing(&info->var, &par->timing); + + bytesPerPixel = info->var.bits_per_pixel / 8; + info->fix.line_length = info->var.xres_virtual * bytesPerPixel; + xpmax = par->timing.width; + ypmax = par->timing.height; + + /* turn off GBE */ + gbe_turn_off(); + + /* set timing info */ + gbe_set_timing_info(&par->timing); + + /* initialize DIDs */ + val = 0; + switch (bytesPerPixel) { + case 1: + SET_GBE_FIELD(WID, TYP, val, GBE_CMODE_I8); + break; + case 2: + SET_GBE_FIELD(WID, TYP, val, GBE_CMODE_ARGB5); + break; + case 4: + SET_GBE_FIELD(WID, TYP, val, GBE_CMODE_RGB8); + break; + } + SET_GBE_FIELD(WID, BUF, val, GBE_BMODE_BOTH); + + for (i = 0; i < 32; i++) + gbe->mode_regs[i] = val; + + /* Initialize interrupts */ + gbe->vt_intr01 = 0xffffffff; + gbe->vt_intr23 = 0xffffffff; + + /* HACK: + The GBE hardware uses a tiled memory to screen mapping. Tiles are + blocks of 512x128, 256x128 or 128x128 pixels, respectively for 8bit, + 16bit and 32 bit modes (64 kB). They cover the screen with partial + tiles on the right and/or bottom of the screen if needed. + For exemple in 640x480 8 bit mode the mapping is: + + <-------- 640 -----> + <---- 512 ----><128|384 offscreen> + ^ ^ + | 128 [tile 0] [tile 1] + | v + ^ + 4 128 [tile 2] [tile 3] + 8 v + 0 ^ + 128 [tile 4] [tile 5] + | v + | ^ + v 96 [tile 6] [tile 7] + 32 offscreen + + Tiles have the advantage that they can be allocated individually in + memory. However, this mapping is not linear at all, which is not + really convienient. In order to support linear addressing, the GBE + DMA hardware is fooled into thinking the screen is only one tile + large and but has a greater height, so that the DMA transfer covers + the same region. + Tiles are still allocated as independent chunks of 64KB of + continuous physical memory and remapped so that the kernel sees the + framebuffer as a continuous virtual memory. The GBE tile table is + set up so that each tile references one of these 64k blocks: + + GBE -> tile list framebuffer TLB <------------ CPU + [ tile 0 ] -> [ 64KB ] <- [ 16x 4KB page entries ] ^ + ... ... ... linear virtual FB + [ tile n ] -> [ 64KB ] <- [ 16x 4KB page entries ] v + + + The GBE hardware is then told that the buffer is 512*tweaked_height, + with tweaked_height = real_width*real_height/pixels_per_tile. + Thus the GBE hardware will scan the first tile, filing the first 64k + covered region of the screen, and then will proceed to the next + tile, until the whole screen is covered. + + Here is what would happen at 640x480 8bit: + + normal tiling linear + ^ 11111111111111112222 11111111111111111111 ^ + 128 11111111111111112222 11111111111111111111 102 lines + 11111111111111112222 11111111111111111111 v + V 11111111111111112222 11111111222222222222 + 33333333333333334444 22222222222222222222 + 33333333333333334444 22222222222222222222 + < 512 > < 256 > 102*640+256 = 64k + + NOTE: The only mode for which this is not working is 800x600 8bit, + as 800*600/512 = 937.5 which is not integer and thus causes + flickering. + I guess this is not so important as one can use 640x480 8bit or + 800x600 16bit anyway. + */ + + /* Tell gbe about the tiles table location */ + /* tile_ptr -> [ tile 1 ] -> FB mem */ + /* [ tile 2 ] -> FB mem */ + /* ... */ + val = 0; + SET_GBE_FIELD(FRM_CONTROL, FRM_TILE_PTR, val, gbe_tiles.dma >> 9); + SET_GBE_FIELD(FRM_CONTROL, FRM_DMA_ENABLE, val, 0); /* do not start */ + SET_GBE_FIELD(FRM_CONTROL, FRM_LINEAR, val, 0); + gbe->frm_control = val; + + maxPixelsPerTileX = 512 / bytesPerPixel; + wholeTilesX = 1; + partTilesX = 0; + + /* Initialize the framebuffer */ + val = 0; + SET_GBE_FIELD(FRM_SIZE_TILE, FRM_WIDTH_TILE, val, wholeTilesX); + SET_GBE_FIELD(FRM_SIZE_TILE, FRM_RHS, val, partTilesX); + + switch (bytesPerPixel) { + case 1: + SET_GBE_FIELD(FRM_SIZE_TILE, FRM_DEPTH, val, + GBE_FRM_DEPTH_8); + break; + case 2: + SET_GBE_FIELD(FRM_SIZE_TILE, FRM_DEPTH, val, + GBE_FRM_DEPTH_16); + break; + case 4: + SET_GBE_FIELD(FRM_SIZE_TILE, FRM_DEPTH, val, + GBE_FRM_DEPTH_32); + break; + } + gbe->frm_size_tile = val; + + /* compute tweaked height */ + height_pix = xpmax * ypmax / maxPixelsPerTileX; + + val = 0; + SET_GBE_FIELD(FRM_SIZE_PIXEL, FB_HEIGHT_PIX, val, height_pix); + gbe->frm_size_pixel = val; + + /* turn off DID and overlay DMA */ + gbe->did_control = 0; + gbe->ovr_width_tile = 0; + + /* Turn off mouse cursor */ + gbe->crs_ctl = 0; + + /* Turn on GBE */ + gbe_turn_on(); + + /* Initialize the gamma map */ + udelay(10); + for (i = 0; i < 256; i++) + gbe->gmap[i] = (i << 24) | (i << 16) | (i << 8); + + /* Initialize the color map */ + for (i = 0; i < 256; i++) { + int j; + + for (j = 0; j < 1000 && gbe->cm_fifo >= 63; j++) + udelay(10); + if (j == 1000) + printk(KERN_ERR "gbefb: cmap FIFO timeout\n"); + + gbe->cmap[i] = (i << 8) | (i << 16) | (i << 24); + } + + return 0; +} + +static void gbefb_encode_fix(struct fb_fix_screeninfo *fix, + struct fb_var_screeninfo *var) +{ + memset(fix, 0, sizeof(struct fb_fix_screeninfo)); + strcpy(fix->id, "SGI GBE"); + fix->smem_start = (unsigned long) gbe_mem; + fix->smem_len = gbe_mem_size; + fix->type = FB_TYPE_PACKED_PIXELS; + fix->type_aux = 0; + fix->accel = FB_ACCEL_NONE; + switch (var->bits_per_pixel) { + case 8: + fix->visual = FB_VISUAL_PSEUDOCOLOR; + break; + default: + fix->visual = FB_VISUAL_TRUECOLOR; + break; + } + fix->ywrapstep = 0; + fix->xpanstep = 0; + fix->ypanstep = 0; + fix->line_length = var->xres_virtual * var->bits_per_pixel / 8; + fix->mmio_start = GBE_BASE; + fix->mmio_len = sizeof(struct sgi_gbe); +} + +/* + * Set a single color register. The values supplied are already + * rounded down to the hardware's capabilities (according to the + * entries in the var structure). Return != 0 for invalid regno. + */ + +static int gbefb_setcolreg(unsigned regno, unsigned red, unsigned green, + unsigned blue, unsigned transp, + struct fb_info *info) +{ + int i; + + if (regno > 255) + return 1; + red >>= 8; + green >>= 8; + blue >>= 8; + + switch (info->var.bits_per_pixel) { + case 8: + /* wait for the color map FIFO to have a free entry */ + for (i = 0; i < 1000 && gbe->cm_fifo >= 63; i++) + udelay(10); + if (i == 1000) { + printk(KERN_ERR "gbefb: cmap FIFO timeout\n"); + return 1; + } + gbe->cmap[regno] = (red << 24) | (green << 16) | (blue << 8); + break; + case 15: + case 16: + red >>= 3; + green >>= 3; + blue >>= 3; + pseudo_palette[regno] = + (red << info->var.red.offset) | + (green << info->var.green.offset) | + (blue << info->var.blue.offset); + break; + case 32: + pseudo_palette[regno] = + (red << info->var.red.offset) | + (green << info->var.green.offset) | + (blue << info->var.blue.offset); + break; + } + + return 0; +} + +/* + * Check video mode validity, eventually modify var to best match. + */ +static int gbefb_check_var(struct fb_var_screeninfo *var, struct fb_info *info) +{ + unsigned int line_length; + struct gbe_timing_info timing; + + /* Limit bpp to 8, 16, and 32 */ + if (var->bits_per_pixel <= 8) + var->bits_per_pixel = 8; + else if (var->bits_per_pixel <= 16) + var->bits_per_pixel = 16; + else if (var->bits_per_pixel <= 32) + var->bits_per_pixel = 32; + else + return -EINVAL; + + /* Check the mode can be mapped linearly with the tile table trick. */ + /* This requires width x height x bytes/pixel be a multiple of 512 */ + if ((var->xres * var->yres * var->bits_per_pixel) & 4095) + return -EINVAL; + + var->grayscale = 0; /* No grayscale for now */ + + if ((var->pixclock = compute_gbe_timing(var, &timing)) < 0) + return(-EINVAL); + + /* Adjust virtual resolution, if necessary */ + if (var->xres > var->xres_virtual || (!ywrap && !ypan)) + var->xres_virtual = var->xres; + if (var->yres > var->yres_virtual || (!ywrap && !ypan)) + var->yres_virtual = var->yres; + + if (var->vmode & FB_VMODE_CONUPDATE) { + var->vmode |= FB_VMODE_YWRAP; + var->xoffset = info->var.xoffset; + var->yoffset = info->var.yoffset; + } + + /* No grayscale for now */ + var->grayscale = 0; + + /* Memory limit */ + line_length = var->xres_virtual * var->bits_per_pixel / 8; + if (line_length * var->yres_virtual > gbe_mem_size) + return -ENOMEM; /* Virtual resolution too high */ + + switch (var->bits_per_pixel) { + case 8: + var->red.offset = 0; + var->red.length = 8; + var->green.offset = 0; + var->green.length = 8; + var->blue.offset = 0; + var->blue.length = 8; + var->transp.offset = 0; + var->transp.length = 0; + break; + case 16: /* RGB 1555 */ + var->red.offset = 10; + var->red.length = 5; + var->green.offset = 5; + var->green.length = 5; + var->blue.offset = 0; + var->blue.length = 5; + var->transp.offset = 0; + var->transp.length = 0; + break; + case 32: /* RGB 8888 */ + var->red.offset = 24; + var->red.length = 8; + var->green.offset = 16; + var->green.length = 8; + var->blue.offset = 8; + var->blue.length = 8; + var->transp.offset = 0; + var->transp.length = 8; + break; + } + var->red.msb_right = 0; + var->green.msb_right = 0; + var->blue.msb_right = 0; + var->transp.msb_right = 0; + + var->left_margin = timing.htotal - timing.hsync_end; + var->right_margin = timing.hsync_start - timing.width; + var->upper_margin = timing.vtotal - timing.vsync_end; + var->lower_margin = timing.vsync_start - timing.height; + var->hsync_len = timing.hsync_end - timing.hsync_start; + var->vsync_len = timing.vsync_end - timing.vsync_start; + + return 0; +} + +static int gbefb_mmap(struct fb_info *info, struct file *file, + struct vm_area_struct *vma) +{ + unsigned long size = vma->vm_end - vma->vm_start; + unsigned long offset = vma->vm_pgoff << PAGE_SHIFT; + unsigned long addr; + unsigned long phys_addr, phys_size; + u16 *tile; + + /* check range */ + if (vma->vm_pgoff > (~0UL >> PAGE_SHIFT)) + return -EINVAL; + if (offset + size > gbe_mem_size) + return -EINVAL; + + /* remap using the fastest write-through mode on architecture */ + /* try not polluting the cache when possible */ + pgprot_val(vma->vm_page_prot) = + pgprot_fb(pgprot_val(vma->vm_page_prot)); + + vma->vm_flags |= VM_IO | VM_RESERVED; + vma->vm_file = file; + + /* look for the starting tile */ + tile = &gbe_tiles.cpu[offset >> TILE_SHIFT]; + addr = vma->vm_start; + offset &= TILE_MASK; + + /* remap each tile separately */ + do { + phys_addr = (((unsigned long) (*tile)) << TILE_SHIFT) + offset; + if ((offset + size) < TILE_SIZE) + phys_size = size; + else + phys_size = TILE_SIZE - offset; + + if (remap_pfn_range(vma, addr, phys_addr >> PAGE_SHIFT, + phys_size, vma->vm_page_prot)) + return -EAGAIN; + + offset = 0; + size -= phys_size; + addr += phys_size; + tile++; + } while (size); + + return 0; +} + +static struct fb_ops gbefb_ops = { + .owner = THIS_MODULE, + .fb_check_var = gbefb_check_var, + .fb_set_par = gbefb_set_par, + .fb_setcolreg = gbefb_setcolreg, + .fb_mmap = gbefb_mmap, + .fb_blank = gbefb_blank, + .fb_fillrect = cfb_fillrect, + .fb_copyarea = cfb_copyarea, + .fb_imageblit = cfb_imageblit, + .fb_cursor = soft_cursor, +}; + +/* + * sysfs + */ + +static ssize_t gbefb_show_memsize(struct device *dev, char *buf) +{ + return snprintf(buf, PAGE_SIZE, "%d\n", gbe_mem_size); +} + +static DEVICE_ATTR(size, S_IRUGO, gbefb_show_memsize, NULL); + +static ssize_t gbefb_show_rev(struct device *device, char *buf) +{ + return snprintf(buf, PAGE_SIZE, "%d\n", gbe_revision); +} + +static DEVICE_ATTR(revision, S_IRUGO, gbefb_show_rev, NULL); + +static void __devexit gbefb_remove_sysfs(struct device *dev) +{ + device_remove_file(dev, &dev_attr_size); + device_remove_file(dev, &dev_attr_revision); +} + +static void gbefb_create_sysfs(struct device *dev) +{ + device_create_file(dev, &dev_attr_size); + device_create_file(dev, &dev_attr_revision); +} + +/* + * Initialization + */ + +int __init gbefb_setup(char *options) +{ + char *this_opt; + + if (!options || !*options) + return 0; + + while ((this_opt = strsep(&options, ",")) != NULL) { + if (!strncmp(this_opt, "monitor:", 8)) { + if (!strncmp(this_opt + 8, "crt", 3)) { + flat_panel_enabled = 0; + default_var = &default_var_CRT; + default_mode = &default_mode_CRT; + } else if (!strncmp(this_opt + 8, "1600sw", 6) || + !strncmp(this_opt + 8, "lcd", 3)) { + flat_panel_enabled = 1; + default_var = &default_var_LCD; + default_mode = &default_mode_LCD; + } + } else if (!strncmp(this_opt, "mem:", 4)) { + gbe_mem_size = memparse(this_opt + 4, &this_opt); + if (gbe_mem_size > CONFIG_FB_GBE_MEM * 1024 * 1024) + gbe_mem_size = CONFIG_FB_GBE_MEM * 1024 * 1024; + if (gbe_mem_size < TILE_SIZE) + gbe_mem_size = TILE_SIZE; + } else + mode_option = this_opt; + } + return 0; +} + +static int __init gbefb_probe(struct device *dev) +{ + int i, ret = 0; + struct fb_info *info; + struct gbefb_par *par; + struct platform_device *p_dev = to_platform_device(dev); +#ifndef MODULE + char *options = NULL; +#endif + + info = framebuffer_alloc(sizeof(struct gbefb_par), &p_dev->dev); + if (!info) + return -ENOMEM; + +#ifndef MODULE + if (fb_get_options("gbefb", &options)) + return -ENODEV; + gbefb_setup(options); +#endif + + if (!request_mem_region(GBE_BASE, sizeof(struct sgi_gbe), "GBE")) { + printk(KERN_ERR "gbefb: couldn't reserve mmio region\n"); + ret = -EBUSY; + goto out_release_framebuffer; + } + + gbe = (struct sgi_gbe *) ioremap(GBE_BASE, sizeof(struct sgi_gbe)); + if (!gbe) { + printk(KERN_ERR "gbefb: couldn't map mmio region\n"); + ret = -ENXIO; + goto out_release_mem_region; + } + gbe_revision = gbe->ctrlstat & 15; + + gbe_tiles.cpu = + dma_alloc_coherent(NULL, GBE_TLB_SIZE * sizeof(uint16_t), + &gbe_tiles.dma, GFP_KERNEL); + if (!gbe_tiles.cpu) { + printk(KERN_ERR "gbefb: couldn't allocate tiles table\n"); + ret = -ENOMEM; + goto out_unmap; + } + + if (gbe_mem_phys) { + /* memory was allocated at boot time */ + gbe_mem = ioremap_nocache(gbe_mem_phys, gbe_mem_size); + gbe_dma_addr = 0; + } else { + /* try to allocate memory with the classical allocator + * this has high chance to fail on low memory machines */ + gbe_mem = dma_alloc_coherent(NULL, gbe_mem_size, &gbe_dma_addr, + GFP_KERNEL); + gbe_mem_phys = (unsigned long) gbe_dma_addr; + } + +#ifdef CONFIG_X86 + mtrr_add(gbe_mem_phys, gbe_mem_size, MTRR_TYPE_WRCOMB, 1); +#endif + + if (!gbe_mem) { + printk(KERN_ERR "gbefb: couldn't map framebuffer\n"); + ret = -ENXIO; + goto out_tiles_free; + } + + /* map framebuffer memory into tiles table */ + for (i = 0; i < (gbe_mem_size >> TILE_SHIFT); i++) + gbe_tiles.cpu[i] = (gbe_mem_phys >> TILE_SHIFT) + i; + + info->fbops = &gbefb_ops; + info->pseudo_palette = pseudo_palette; + info->flags = FBINFO_DEFAULT; + info->screen_base = gbe_mem; + fb_alloc_cmap(&info->cmap, 256, 0); + + /* reset GBE */ + gbe_reset(); + + par = info->par; + /* turn on default video mode */ + if (fb_find_mode(&par->var, info, mode_option, NULL, 0, + default_mode, 8) == 0) + par->var = *default_var; + info->var = par->var; + gbefb_check_var(&par->var, info); + gbefb_encode_fix(&info->fix, &info->var); + + if (register_framebuffer(info) < 0) { + printk(KERN_ERR "gbefb: couldn't register framebuffer\n"); + ret = -ENXIO; + goto out_gbe_unmap; + } + + dev_set_drvdata(&p_dev->dev, info); + gbefb_create_sysfs(dev); + + printk(KERN_INFO "fb%d: %s rev %d @ 0x%08x using %dkB memory\n", + info->node, info->fix.id, gbe_revision, (unsigned) GBE_BASE, + gbe_mem_size >> 10); + + return 0; + +out_gbe_unmap: + if (gbe_dma_addr) + dma_free_coherent(NULL, gbe_mem_size, gbe_mem, gbe_mem_phys); + else + iounmap(gbe_mem); +out_tiles_free: + dma_free_coherent(NULL, GBE_TLB_SIZE * sizeof(uint16_t), + (void *)gbe_tiles.cpu, gbe_tiles.dma); +out_unmap: + iounmap(gbe); +out_release_mem_region: + release_mem_region(GBE_BASE, sizeof(struct sgi_gbe)); +out_release_framebuffer: + framebuffer_release(info); + + return ret; +} + +static int __devexit gbefb_remove(struct device* dev) +{ + struct platform_device *p_dev = to_platform_device(dev); + struct fb_info *info = dev_get_drvdata(&p_dev->dev); + + unregister_framebuffer(info); + gbe_turn_off(); + if (gbe_dma_addr) + dma_free_coherent(NULL, gbe_mem_size, gbe_mem, gbe_mem_phys); + else + iounmap(gbe_mem); + dma_free_coherent(NULL, GBE_TLB_SIZE * sizeof(uint16_t), + (void *)gbe_tiles.cpu, gbe_tiles.dma); + release_mem_region(GBE_BASE, sizeof(struct sgi_gbe)); + iounmap(gbe); + gbefb_remove_sysfs(dev); + framebuffer_release(info); + + return 0; +} + +static struct device_driver gbefb_driver = { + .name = "gbefb", + .bus = &platform_bus_type, + .probe = gbefb_probe, + .remove = __devexit_p(gbefb_remove), +}; + +static struct platform_device gbefb_device = { + .name = "gbefb", +}; + +int __init gbefb_init(void) +{ + int ret = driver_register(&gbefb_driver); + if (!ret) { + ret = platform_device_register(&gbefb_device); + if (ret) + driver_unregister(&gbefb_driver); + } + return ret; +} + +void __exit gbefb_exit(void) +{ + driver_unregister(&gbefb_driver); +} + +module_init(gbefb_init); +module_exit(gbefb_exit); + +MODULE_LICENSE("GPL"); |