diff options
Diffstat (limited to 'drivers/w1/w1_io.c')
| -rw-r--r-- | drivers/w1/w1_io.c | 102 |
1 files changed, 57 insertions, 45 deletions
diff --git a/drivers/w1/w1_io.c b/drivers/w1/w1_io.c index e10acc237733..282092421cc9 100644 --- a/drivers/w1/w1_io.c +++ b/drivers/w1/w1_io.c @@ -62,7 +62,9 @@ static void w1_write_bit(struct w1_master *dev, int bit); static u8 w1_read_bit(struct w1_master *dev); /** - * Generates a write-0 or write-1 cycle and samples the level. + * w1_touch_bit() - Generates a write-0 or write-1 cycle and samples the level. + * @dev: the master device + * @bit: 0 - write a 0, 1 - write a 0 read the level */ static u8 w1_touch_bit(struct w1_master *dev, int bit) { @@ -77,7 +79,10 @@ static u8 w1_touch_bit(struct w1_master *dev, int bit) } /** - * Generates a write-0 or write-1 cycle. + * w1_write_bit() - Generates a write-0 or write-1 cycle. + * @dev: the master device + * @bit: bit to write + * * Only call if dev->bus_master->touch_bit is NULL */ static void w1_write_bit(struct w1_master *dev, int bit) @@ -102,11 +107,12 @@ static void w1_write_bit(struct w1_master *dev, int bit) } /** + * w1_pre_write() - pre-write operations + * @dev: the master device + * * Pre-write operation, currently only supporting strong pullups. * Program the hardware for a strong pullup, if one has been requested and * the hardware supports it. - * - * @param dev the master device */ static void w1_pre_write(struct w1_master *dev) { @@ -118,11 +124,12 @@ static void w1_pre_write(struct w1_master *dev) } /** + * w1_post_write() - post-write options + * @dev: the master device + * * Post-write operation, currently only supporting strong pullups. * If a strong pullup was requested, clear it if the hardware supports * them, or execute the delay otherwise, in either case clear the request. - * - * @param dev the master device */ static void w1_post_write(struct w1_master *dev) { @@ -136,10 +143,9 @@ static void w1_post_write(struct w1_master *dev) } /** - * Writes 8 bits. - * - * @param dev the master device - * @param byte the byte to write + * w1_write_8() - Writes 8 bits. + * @dev: the master device + * @byte: the byte to write */ void w1_write_8(struct w1_master *dev, u8 byte) { @@ -161,7 +167,9 @@ EXPORT_SYMBOL_GPL(w1_write_8); /** - * Generates a write-1 cycle and samples the level. + * w1_read_bit() - Generates a write-1 cycle and samples the level. + * @dev: the master device + * * Only call if dev->bus_master->touch_bit is NULL */ static u8 w1_read_bit(struct w1_master *dev) @@ -185,16 +193,17 @@ static u8 w1_read_bit(struct w1_master *dev) } /** - * Does a triplet - used for searching ROM addresses. + * w1_triplet() - * Does a triplet - used for searching ROM addresses. + * @dev: the master device + * @bdir: the bit to write if both id_bit and comp_bit are 0 + * * Return bits: * bit 0 = id_bit * bit 1 = comp_bit * bit 2 = dir_taken * If both bits 0 & 1 are set, the search should be restarted. * - * @param dev the master device - * @param bdir the bit to write if both id_bit and comp_bit are 0 - * @return bit fields - see above + * Return: bit fields - see above */ u8 w1_triplet(struct w1_master *dev, int bdir) { @@ -226,10 +235,10 @@ u8 w1_triplet(struct w1_master *dev, int bdir) } /** - * Reads 8 bits. + * w1_read_8() - Reads 8 bits. + * @dev: the master device * - * @param dev the master device - * @return the byte read + * Return: the byte read */ u8 w1_read_8(struct w1_master *dev) { @@ -247,11 +256,10 @@ u8 w1_read_8(struct w1_master *dev) EXPORT_SYMBOL_GPL(w1_read_8); /** - * Writes a series of bytes. - * - * @param dev the master device - * @param buf pointer to the data to write - * @param len the number of bytes to write + * w1_write_block() - Writes a series of bytes. + * @dev: the master device + * @buf: pointer to the data to write + * @len: the number of bytes to write */ void w1_write_block(struct w1_master *dev, const u8 *buf, int len) { @@ -269,11 +277,10 @@ void w1_write_block(struct w1_master *dev, const u8 *buf, int len) EXPORT_SYMBOL_GPL(w1_write_block); /** - * Touches a series of bytes. - * - * @param dev the master device - * @param buf pointer to the data to write - * @param len the number of bytes to write + * w1_touch_block() - Touches a series of bytes. + * @dev: the master device + * @buf: pointer to the data to write + * @len: the number of bytes to write */ void w1_touch_block(struct w1_master *dev, u8 *buf, int len) { @@ -294,12 +301,11 @@ void w1_touch_block(struct w1_master *dev, u8 *buf, int len) EXPORT_SYMBOL_GPL(w1_touch_block); /** - * Reads a series of bytes. - * - * @param dev the master device - * @param buf pointer to the buffer to fill - * @param len the number of bytes to read - * @return the number of bytes read + * w1_read_block() - Reads a series of bytes. + * @dev: the master device + * @buf: pointer to the buffer to fill + * @len: the number of bytes to read + * Return: the number of bytes read */ u8 w1_read_block(struct w1_master *dev, u8 *buf, int len) { @@ -319,10 +325,9 @@ u8 w1_read_block(struct w1_master *dev, u8 *buf, int len) EXPORT_SYMBOL_GPL(w1_read_block); /** - * Issues a reset bus sequence. - * - * @param dev The bus master pointer - * @return 0=Device present, 1=No device present or error + * w1_reset_bus() - Issues a reset bus sequence. + * @dev: the master device + * Return: 0=Device present, 1=No device present or error */ int w1_reset_bus(struct w1_master *dev) { @@ -383,12 +388,15 @@ void w1_search_devices(struct w1_master *dev, u8 search_type, w1_slave_found_cal } /** + * w1_reset_select_slave() - reset and select a slave + * @sl: the slave to select + * * Resets the bus and then selects the slave by sending either a skip rom - * or a rom match. + * or a rom match. A skip rom is issued if there is only one device + * registered on the bus. * The w1 master lock must be held. * - * @param sl the slave to select - * @return 0=success, anything else=error + * Return: 0=success, anything else=error */ int w1_reset_select_slave(struct w1_slave *sl) { @@ -409,6 +417,9 @@ int w1_reset_select_slave(struct w1_slave *sl) EXPORT_SYMBOL_GPL(w1_reset_select_slave); /** + * w1_reset_resume_command() - resume instead of another match ROM + * @dev: the master device + * * When the workflow with a slave amongst many requires several * successive commands a reset between each, this function is similar * to doing a reset then a match ROM for the last matched ROM. The @@ -420,8 +431,6 @@ EXPORT_SYMBOL_GPL(w1_reset_select_slave); * doesn't work of course, but the resume command is the next best thing. * * The w1 master lock must be held. - * - * @param dev the master device */ int w1_reset_resume_command(struct w1_master *dev) { @@ -435,6 +444,10 @@ int w1_reset_resume_command(struct w1_master *dev) EXPORT_SYMBOL_GPL(w1_reset_resume_command); /** + * w1_next_pullup() - register for a strong pullup + * @dev: the master device + * @delay: time in milliseconds + * * Put out a strong pull-up of the specified duration after the next write * operation. Not all hardware supports strong pullups. Hardware that * doesn't support strong pullups will sleep for the given time after the @@ -442,8 +455,7 @@ EXPORT_SYMBOL_GPL(w1_reset_resume_command); * the next write, specifying zero will clear a previous request. * The w1 master lock must be held. * - * @param delay time in milliseconds - * @return 0=success, anything else=error + * Return: 0=success, anything else=error */ void w1_next_pullup(struct w1_master *dev, int delay) { |