diff options
Diffstat (limited to 'drivers')
50 files changed, 2465 insertions, 220 deletions
diff --git a/drivers/Makefile b/drivers/Makefile index ccfa259fa848..6ee53c7a57a1 100644 --- a/drivers/Makefile +++ b/drivers/Makefile @@ -43,6 +43,8 @@ obj-y += macintosh/ obj-$(CONFIG_IDE) += ide/ obj-$(CONFIG_SCSI) += scsi/ obj-$(CONFIG_ATA) += ata/ +obj-$(CONFIG_MTD) += mtd/ +obj-$(CONFIG_SPI) += spi/ obj-y += net/ obj-$(CONFIG_ATM) += atm/ obj-$(CONFIG_FUSION) += message/ @@ -51,8 +53,6 @@ obj-y += ieee1394/ obj-$(CONFIG_UIO) += uio/ obj-y += cdrom/ obj-y += auxdisplay/ -obj-$(CONFIG_MTD) += mtd/ -obj-$(CONFIG_SPI) += spi/ obj-$(CONFIG_PCCARD) += pcmcia/ obj-$(CONFIG_DIO) += dio/ obj-$(CONFIG_SBUS) += sbus/ diff --git a/drivers/mtd/Kconfig b/drivers/mtd/Kconfig index b8e35a0b4d72..e4ec3659759a 100644 --- a/drivers/mtd/Kconfig +++ b/drivers/mtd/Kconfig @@ -25,6 +25,14 @@ config MTD_DEBUG_VERBOSE help Determines the verbosity level of the MTD debugging messages. +config MTD_TESTS + tristate "MTD tests support" + depends on m + help + This option includes various MTD tests into compilation. The tests + should normally be compiled as kernel modules. The modules perform + various checks and verifications when loaded. + config MTD_CONCAT tristate "MTD concatenating support" help @@ -45,14 +53,6 @@ config MTD_PARTITIONS devices. Partitioning on NFTL 'devices' is a different - that's the 'normal' form of partitioning used on a block device. -config MTD_TESTS - tristate "MTD tests support" - depends on m - help - This option includes various MTD tests into compilation. The tests - should normally be compiled as kernel modules. The modules perform - various checks and verifications when loaded. - config MTD_REDBOOT_PARTS tristate "RedBoot partition table parsing" depends on MTD_PARTITIONS diff --git a/drivers/mtd/afs.c b/drivers/mtd/afs.c index d072ca5be689..cec7ab98b2a9 100644 --- a/drivers/mtd/afs.c +++ b/drivers/mtd/afs.c @@ -239,7 +239,7 @@ static int parse_afs_partitions(struct mtd_info *mtd, parts[idx].offset = img_ptr; parts[idx].mask_flags = 0; - printk(" mtd%d: at 0x%08x, %5dKB, %8u, %s\n", + printk(" mtd%d: at 0x%08x, %5lluKiB, %8u, %s\n", idx, img_ptr, parts[idx].size / 1024, iis.imageNumber, str); diff --git a/drivers/mtd/chips/cfi_cmdset_0002.c b/drivers/mtd/chips/cfi_cmdset_0002.c index 61ea833e0908..94bb61e19047 100644 --- a/drivers/mtd/chips/cfi_cmdset_0002.c +++ b/drivers/mtd/chips/cfi_cmdset_0002.c @@ -282,16 +282,6 @@ static void fixup_s29gl032n_sectors(struct mtd_info *mtd, void *param) } } -static void fixup_M29W128G_write_buffer(struct mtd_info *mtd, void *param) -{ - struct map_info *map = mtd->priv; - struct cfi_private *cfi = map->fldrv_priv; - if (cfi->cfiq->BufWriteTimeoutTyp) { - pr_warning("Don't use write buffer on ST flash M29W128G\n"); - cfi->cfiq->BufWriteTimeoutTyp = 0; - } -} - static struct cfi_fixup cfi_fixup_table[] = { { CFI_MFR_ATMEL, CFI_ID_ANY, fixup_convert_atmel_pri, NULL }, #ifdef AMD_BOOTLOC_BUG @@ -308,7 +298,6 @@ static struct cfi_fixup cfi_fixup_table[] = { { CFI_MFR_AMD, 0x1301, fixup_s29gl064n_sectors, NULL, }, { CFI_MFR_AMD, 0x1a00, fixup_s29gl032n_sectors, NULL, }, { CFI_MFR_AMD, 0x1a01, fixup_s29gl032n_sectors, NULL, }, - { CFI_MFR_ST, 0x227E, fixup_M29W128G_write_buffer, NULL, }, #if !FORCE_WORD_WRITE { CFI_MFR_ANY, CFI_ID_ANY, fixup_use_write_buffers, NULL, }, #endif diff --git a/drivers/mtd/chips/cfi_util.c b/drivers/mtd/chips/cfi_util.c index 34d40e25d312..c5a84fda5410 100644..100755 --- a/drivers/mtd/chips/cfi_util.c +++ b/drivers/mtd/chips/cfi_util.c @@ -81,6 +81,10 @@ void __xipram cfi_qry_mode_off(uint32_t base, struct map_info *map, { cfi_send_gen_cmd(0xF0, 0, base, map, cfi, cfi->device_type, NULL); cfi_send_gen_cmd(0xFF, 0, base, map, cfi, cfi->device_type, NULL); + /* M29W128G flashes require an additional reset command + when exit qry mode */ + if ((cfi->mfr == CFI_MFR_ST) && (cfi->id == 0x227E || cfi->id == 0x7E)) + cfi_send_gen_cmd(0xF0, 0, base, map, cfi, cfi->device_type, NULL); } EXPORT_SYMBOL_GPL(cfi_qry_mode_off); diff --git a/drivers/mtd/chips/jedec_probe.c b/drivers/mtd/chips/jedec_probe.c index ccc4cfc7e4b5..736a3be265f2 100644 --- a/drivers/mtd/chips/jedec_probe.c +++ b/drivers/mtd/chips/jedec_probe.c @@ -111,6 +111,11 @@ #define I28F320B3B 0x8897 #define I28F640B3T 0x8898 #define I28F640B3B 0x8899 +#define I28F640C3B 0x88CD +#define I28F160F3T 0x88F3 +#define I28F160F3B 0x88F4 +#define I28F160C3T 0x88C2 +#define I28F160C3B 0x88C3 #define I82802AB 0x00ad #define I82802AC 0x00ac @@ -150,6 +155,7 @@ #define M50LPW080 0x002F #define M50FLW080A 0x0080 #define M50FLW080B 0x0081 +#define PSD4256G6V 0x00e9 /* SST */ #define SST29EE020 0x0010 @@ -201,6 +207,7 @@ enum uaddr { MTD_UADDR_0x0555_0x02AA, MTD_UADDR_0x0555_0x0AAA, MTD_UADDR_0x5555_0x2AAA, + MTD_UADDR_0x0AAA_0x0554, MTD_UADDR_0x0AAA_0x0555, MTD_UADDR_0xAAAA_0x5555, MTD_UADDR_DONT_CARE, /* Requires an arbitrary address */ @@ -245,6 +252,11 @@ static const struct unlock_addr unlock_addrs[] = { .addr2 = 0x2aaa }, + [MTD_UADDR_0x0AAA_0x0554] = { + .addr1 = 0x0AAA, + .addr2 = 0x0554 + }, + [MTD_UADDR_0x0AAA_0x0555] = { .addr1 = 0x0AAA, .addr2 = 0x0555 @@ -1103,6 +1115,19 @@ static const struct amd_flash_info jedec_table[] = { } }, { .mfr_id = MANUFACTURER_INTEL, + .dev_id = I28F640C3B, + .name = "Intel 28F640C3B", + .devtypes = CFI_DEVICETYPE_X16, + .uaddr = MTD_UADDR_UNNECESSARY, + .dev_size = SIZE_8MiB, + .cmd_set = P_ID_INTEL_STD, + .nr_regions = 2, + .regions = { + ERASEINFO(0x02000, 8), + ERASEINFO(0x10000, 127), + } + }, { + .mfr_id = MANUFACTURER_INTEL, .dev_id = I82802AB, .name = "Intel 82802AB", .devtypes = CFI_DEVICETYPE_X8, @@ -1156,8 +1181,8 @@ static const struct amd_flash_info jedec_table[] = { .mfr_id = MANUFACTURER_NEC, .dev_id = UPD29F064115, .name = "NEC uPD29F064115", - .devtypes = CFI_DEVICETYPE_X16|CFI_DEVICETYPE_X8, - .uaddr = MTD_UADDR_0x0555_0x02AA, /* ???? */ + .devtypes = CFI_DEVICETYPE_X16, + .uaddr = MTD_UADDR_0xAAAA_0x5555, .dev_size = SIZE_8MiB, .cmd_set = P_ID_AMD_STD, .nr_regions = 3, @@ -1726,6 +1751,18 @@ static const struct amd_flash_info jedec_table[] = { ERASEINFO(0x1000,16), } }, { + .mfr_id = 0xff00 | MANUFACTURER_ST, + .dev_id = 0xff00 | PSD4256G6V, + .name = "ST PSD4256G6V", + .devtypes = CFI_DEVICETYPE_X16, + .uaddr = MTD_UADDR_0x0AAA_0x0554, + .dev_size = SIZE_1MiB, + .cmd_set = P_ID_AMD_STD, + .nr_regions = 1, + .regions = { + ERASEINFO(0x10000,16), + } + }, { .mfr_id = MANUFACTURER_TOSHIBA, .dev_id = TC58FVT160, .name = "Toshiba TC58FVT160", diff --git a/drivers/mtd/devices/Kconfig b/drivers/mtd/devices/Kconfig index 325fab92a62c..c222514bb70d 100644 --- a/drivers/mtd/devices/Kconfig +++ b/drivers/mtd/devices/Kconfig @@ -104,6 +104,16 @@ config M25PXX_USE_FAST_READ help This option enables FAST_READ access supported by ST M25Pxx. +config MTD_SST25L + tristate "Support SST25L (non JEDEC) SPI Flash chips" + depends on SPI_MASTER + help + This enables access to the non JEDEC SST25L SPI flash chips, used + for program and data storage. + + Set up your spi devices with the right board-specific platform data, + if you want to specify device partitioning. + config MTD_SLRAM tristate "Uncached system RAM" help diff --git a/drivers/mtd/devices/Makefile b/drivers/mtd/devices/Makefile index 0993d5cf3923..ab5c9b92ac82 100644 --- a/drivers/mtd/devices/Makefile +++ b/drivers/mtd/devices/Makefile @@ -16,3 +16,4 @@ obj-$(CONFIG_MTD_LART) += lart.o obj-$(CONFIG_MTD_BLOCK2MTD) += block2mtd.o obj-$(CONFIG_MTD_DATAFLASH) += mtd_dataflash.o obj-$(CONFIG_MTD_M25P80) += m25p80.o +obj-$(CONFIG_MTD_SST25L) += sst25l.o diff --git a/drivers/mtd/devices/lart.c b/drivers/mtd/devices/lart.c index 578de1c67bfe..f4359fe7150f 100644 --- a/drivers/mtd/devices/lart.c +++ b/drivers/mtd/devices/lart.c @@ -393,7 +393,8 @@ static int flash_erase (struct mtd_info *mtd,struct erase_info *instr) * erase range is aligned with the erase size which is in * effect here. */ - if (instr->addr & (mtd->eraseregions[i].erasesize - 1)) return (-EINVAL); + if (i < 0 || (instr->addr & (mtd->eraseregions[i].erasesize - 1))) + return -EINVAL; /* Remember the erase region we start on */ first = i; @@ -409,7 +410,8 @@ static int flash_erase (struct mtd_info *mtd,struct erase_info *instr) i--; /* is the end aligned on a block boundary? */ - if ((instr->addr + instr->len) & (mtd->eraseregions[i].erasesize - 1)) return (-EINVAL); + if (i < 0 || ((instr->addr + instr->len) & (mtd->eraseregions[i].erasesize - 1))) + return -EINVAL; addr = instr->addr; len = instr->len; diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c index eb495d83064f..379c316f329e 100644 --- a/drivers/mtd/devices/m25p80.c +++ b/drivers/mtd/devices/m25p80.c @@ -44,6 +44,11 @@ #define OPCODE_SE 0xd8 /* Sector erase (usually 64KiB) */ #define OPCODE_RDID 0x9f /* Read JEDEC ID */ +/* Used for SST flashes only. */ +#define OPCODE_BP 0x02 /* Byte program */ +#define OPCODE_WRDI 0x04 /* Write disable */ +#define OPCODE_AAI_WP 0xad /* Auto address increment word program */ + /* Status Register bits. */ #define SR_WIP 1 /* Write in progress */ #define SR_WEL 2 /* Write enable latch */ @@ -132,6 +137,15 @@ static inline int write_enable(struct m25p *flash) return spi_write_then_read(flash->spi, &code, 1, NULL, 0); } +/* + * Send write disble instruction to the chip. + */ +static inline int write_disable(struct m25p *flash) +{ + u8 code = OPCODE_WRDI; + + return spi_write_then_read(flash->spi, &code, 1, NULL, 0); +} /* * Service routine to read status register until ready, or timeout occurs. @@ -454,6 +468,111 @@ static int m25p80_write(struct mtd_info *mtd, loff_t to, size_t len, return 0; } +static int sst_write(struct mtd_info *mtd, loff_t to, size_t len, + size_t *retlen, const u_char *buf) +{ + struct m25p *flash = mtd_to_m25p(mtd); + struct spi_transfer t[2]; + struct spi_message m; + size_t actual; + int cmd_sz, ret; + + if (retlen) + *retlen = 0; + + /* sanity checks */ + if (!len) + return 0; + + if (to + len > flash->mtd.size) + return -EINVAL; + + spi_message_init(&m); + memset(t, 0, (sizeof t)); + + t[0].tx_buf = flash->command; + t[0].len = CMD_SIZE; + spi_message_add_tail(&t[0], &m); + + t[1].tx_buf = buf; + spi_message_add_tail(&t[1], &m); + + mutex_lock(&flash->lock); + + /* Wait until finished previous write command. */ + ret = wait_till_ready(flash); + if (ret) + goto time_out; + + write_enable(flash); + + actual = to % 2; + /* Start write from odd address. */ + if (actual) { + flash->command[0] = OPCODE_BP; + flash->command[1] = to >> 16; + flash->command[2] = to >> 8; + flash->command[3] = to; + + /* write one byte. */ + t[1].len = 1; + spi_sync(flash->spi, &m); + ret = wait_till_ready(flash); + if (ret) + goto time_out; + *retlen += m.actual_length - CMD_SIZE; + } + to += actual; + + flash->command[0] = OPCODE_AAI_WP; + flash->command[1] = to >> 16; + flash->command[2] = to >> 8; + flash->command[3] = to; + + /* Write out most of the data here. */ + cmd_sz = CMD_SIZE; + for (; actual < len - 1; actual += 2) { + t[0].len = cmd_sz; + /* write two bytes. */ + t[1].len = 2; + t[1].tx_buf = buf + actual; + + spi_sync(flash->spi, &m); + ret = wait_till_ready(flash); + if (ret) + goto time_out; + *retlen += m.actual_length - cmd_sz; + cmd_sz = 1; + to += 2; + } + write_disable(flash); + ret = wait_till_ready(flash); + if (ret) + goto time_out; + + /* Write out trailing byte if it exists. */ + if (actual != len) { + write_enable(flash); + flash->command[0] = OPCODE_BP; + flash->command[1] = to >> 16; + flash->command[2] = to >> 8; + flash->command[3] = to; + t[0].len = CMD_SIZE; + t[1].len = 1; + t[1].tx_buf = buf + actual; + + spi_sync(flash->spi, &m); + ret = wait_till_ready(flash); + if (ret) + goto time_out; + *retlen += m.actual_length - CMD_SIZE; + write_disable(flash); + } + +time_out: + mutex_unlock(&flash->lock); + return ret; +} /****************************************************************************/ @@ -501,7 +620,10 @@ static struct flash_info __devinitdata m25p_data [] = { { "at26df321", 0x1f4701, 0, 64 * 1024, 64, SECT_4K, }, /* Macronix */ + { "mx25l3205d", 0xc22016, 0, 64 * 1024, 64, }, + { "mx25l6405d", 0xc22017, 0, 64 * 1024, 128, }, { "mx25l12805d", 0xc22018, 0, 64 * 1024, 256, }, + { "mx25l12855e", 0xc22618, 0, 64 * 1024, 256, }, /* Spansion -- single (large) sector size only, at least * for the chips listed here (without boot sectors). @@ -511,14 +633,20 @@ static struct flash_info __devinitdata m25p_data [] = { { "s25sl016a", 0x010214, 0, 64 * 1024, 32, }, { "s25sl032a", 0x010215, 0, 64 * 1024, 64, }, { "s25sl064a", 0x010216, 0, 64 * 1024, 128, }, - { "s25sl12800", 0x012018, 0x0300, 256 * 1024, 64, }, + { "s25sl12800", 0x012018, 0x0300, 256 * 1024, 64, }, { "s25sl12801", 0x012018, 0x0301, 64 * 1024, 256, }, + { "s25fl129p0", 0x012018, 0x4d00, 256 * 1024, 64, }, + { "s25fl129p1", 0x012018, 0x4d01, 64 * 1024, 256, }, /* SST -- large erase sizes are "overlays", "sectors" are 4K */ { "sst25vf040b", 0xbf258d, 0, 64 * 1024, 8, SECT_4K, }, { "sst25vf080b", 0xbf258e, 0, 64 * 1024, 16, SECT_4K, }, { "sst25vf016b", 0xbf2541, 0, 64 * 1024, 32, SECT_4K, }, { "sst25vf032b", 0xbf254a, 0, 64 * 1024, 64, SECT_4K, }, + { "sst25wf512", 0xbf2501, 0, 64 * 1024, 1, SECT_4K, }, + { "sst25wf010", 0xbf2502, 0, 64 * 1024, 2, SECT_4K, }, + { "sst25wf020", 0xbf2503, 0, 64 * 1024, 4, SECT_4K, }, + { "sst25wf040", 0xbf2504, 0, 64 * 1024, 8, SECT_4K, }, /* ST Microelectronics -- newer production may have feature updates */ { "m25p05", 0x202010, 0, 32 * 1024, 2, }, @@ -667,7 +795,12 @@ static int __devinit m25p_probe(struct spi_device *spi) flash->mtd.size = info->sector_size * info->n_sectors; flash->mtd.erase = m25p80_erase; flash->mtd.read = m25p80_read; - flash->mtd.write = m25p80_write; + + /* sst flash chips use AAI word program */ + if (info->jedec_id >> 16 == 0xbf) + flash->mtd.write = sst_write; + else + flash->mtd.write = m25p80_write; /* prefer "small sector" erase if possible */ if (info->flags & SECT_4K) { diff --git a/drivers/mtd/devices/mtd_dataflash.c b/drivers/mtd/devices/mtd_dataflash.c index 211c27acd01e..93e3627be74c 100644 --- a/drivers/mtd/devices/mtd_dataflash.c +++ b/drivers/mtd/devices/mtd_dataflash.c @@ -401,7 +401,7 @@ static int dataflash_write(struct mtd_info *mtd, loff_t to, size_t len, (void) dataflash_waitready(priv->spi); -#ifdef CONFIG_MTD_DATAFLASH_VERIFY_WRITE +#ifdef CONFIG_MTD_DATAFLASH_WRITE_VERIFY /* (3) Compare to Buffer1 */ addr = pageaddr << priv->page_offset; @@ -430,7 +430,7 @@ static int dataflash_write(struct mtd_info *mtd, loff_t to, size_t len, } else status = 0; -#endif /* CONFIG_MTD_DATAFLASH_VERIFY_WRITE */ +#endif /* CONFIG_MTD_DATAFLASH_WRITE_VERIFY */ remaining = remaining - writelen; pageaddr++; diff --git a/drivers/mtd/devices/phram.c b/drivers/mtd/devices/phram.c index 088fbb7595b5..1696bbecaa7e 100644 --- a/drivers/mtd/devices/phram.c +++ b/drivers/mtd/devices/phram.c @@ -14,6 +14,9 @@ * Example: * phram=swap,64Mi,128Mi phram=test,900Mi,1Mi */ + +#define pr_fmt(fmt) "phram: " fmt + #include <asm/io.h> #include <linux/init.h> #include <linux/kernel.h> @@ -23,8 +26,6 @@ #include <linux/slab.h> #include <linux/mtd/mtd.h> -#define ERROR(fmt, args...) printk(KERN_ERR "phram: " fmt , ## args) - struct phram_mtd_list { struct mtd_info mtd; struct list_head list; @@ -132,7 +133,7 @@ static int register_device(char *name, unsigned long start, unsigned long len) ret = -EIO; new->mtd.priv = ioremap(start, len); if (!new->mtd.priv) { - ERROR("ioremap failed\n"); + pr_err("ioremap failed\n"); goto out1; } @@ -152,7 +153,7 @@ static int register_device(char *name, unsigned long start, unsigned long len) ret = -EAGAIN; if (add_mtd_device(&new->mtd)) { - ERROR("Failed to register new device\n"); + pr_err("Failed to register new device\n"); goto out2; } @@ -227,8 +228,8 @@ static inline void kill_final_newline(char *str) #define parse_err(fmt, args...) do { \ - ERROR(fmt , ## args); \ - return 0; \ + pr_err(fmt , ## args); \ + return 1; \ } while (0) static int phram_setup(const char *val, struct kernel_param *kp) @@ -256,12 +257,8 @@ static int phram_setup(const char *val, struct kernel_param *kp) parse_err("not enough arguments\n"); ret = parse_name(&name, token[0]); - if (ret == -ENOMEM) - parse_err("out of memory\n"); - if (ret == -ENOSPC) - parse_err("name too long\n"); if (ret) - return 0; + return ret; ret = parse_num32(&start, token[1]); if (ret) { @@ -275,9 +272,11 @@ static int phram_setup(const char *val, struct kernel_param *kp) parse_err("illegal device length\n"); } - register_device(name, start, len); + ret = register_device(name, start, len); + if (!ret) + pr_info("%s device: %#x at %#x\n", name, len, start); - return 0; + return ret; } module_param_call(phram, phram_setup, NULL, NULL, 000); diff --git a/drivers/mtd/devices/slram.c b/drivers/mtd/devices/slram.c index 7d846e9173da..3aa05cd18ea1 100644 --- a/drivers/mtd/devices/slram.c +++ b/drivers/mtd/devices/slram.c @@ -341,7 +341,7 @@ static int __init init_slram(void) #else int count; - for (count = 0; (map[count]) && (count < SLRAM_MAX_DEVICES_PARAMS); + for (count = 0; count < SLRAM_MAX_DEVICES_PARAMS && map[count]; count++) { } diff --git a/drivers/mtd/devices/sst25l.c b/drivers/mtd/devices/sst25l.c new file mode 100644 index 000000000000..c2baf3353f84 --- /dev/null +++ b/drivers/mtd/devices/sst25l.c @@ -0,0 +1,512 @@ +/* + * sst25l.c + * + * Driver for SST25L SPI Flash chips + * + * Copyright © 2009 Bluewater Systems Ltd + * Author: Andre Renaud <andre@bluewatersys.com> + * Author: Ryan Mallon <ryan@bluewatersys.com> + * + * Based on m25p80.c + * + * This code is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/device.h> +#include <linux/mutex.h> +#include <linux/interrupt.h> + +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> + +#include <linux/spi/spi.h> +#include <linux/spi/flash.h> + +/* Erases can take up to 3 seconds! */ +#define MAX_READY_WAIT_JIFFIES msecs_to_jiffies(3000) + +#define SST25L_CMD_WRSR 0x01 /* Write status register */ +#define SST25L_CMD_WRDI 0x04 /* Write disable */ +#define SST25L_CMD_RDSR 0x05 /* Read status register */ +#define SST25L_CMD_WREN 0x06 /* Write enable */ +#define SST25L_CMD_READ 0x03 /* High speed read */ + +#define SST25L_CMD_EWSR 0x50 /* Enable write status register */ +#define SST25L_CMD_SECTOR_ERASE 0x20 /* Erase sector */ +#define SST25L_CMD_READ_ID 0x90 /* Read device ID */ +#define SST25L_CMD_AAI_PROGRAM 0xaf /* Auto address increment */ + +#define SST25L_STATUS_BUSY (1 << 0) /* Chip is busy */ +#define SST25L_STATUS_WREN (1 << 1) /* Write enabled */ +#define SST25L_STATUS_BP0 (1 << 2) /* Block protection 0 */ +#define SST25L_STATUS_BP1 (1 << 3) /* Block protection 1 */ + +struct sst25l_flash { + struct spi_device *spi; + struct mutex lock; + struct mtd_info mtd; + + int partitioned; +}; + +struct flash_info { + const char *name; + uint16_t device_id; + unsigned page_size; + unsigned nr_pages; + unsigned erase_size; +}; + +#define to_sst25l_flash(x) container_of(x, struct sst25l_flash, mtd) + +static struct flash_info __initdata sst25l_flash_info[] = { + {"sst25lf020a", 0xbf43, 256, 1024, 4096}, + {"sst25lf040a", 0xbf44, 256, 2048, 4096}, +}; + +static int sst25l_status(struct sst25l_flash *flash, int *status) +{ + unsigned char command, response; + int err; + + command = SST25L_CMD_RDSR; + err = spi_write_then_read(flash->spi, &command, 1, &response, 1); + if (err < 0) + return err; + + *status = response; + return 0; +} + +static int sst25l_write_enable(struct sst25l_flash *flash, int enable) +{ + unsigned char command[2]; + int status, err; + + command[0] = enable ? SST25L_CMD_WREN : SST25L_CMD_WRDI; + err = spi_write(flash->spi, command, 1); + if (err) + return err; + + command[0] = SST25L_CMD_EWSR; + err = spi_write(flash->spi, command, 1); + if (err) + return err; + + command[0] = SST25L_CMD_WRSR; + command[1] = enable ? 0 : SST25L_STATUS_BP0 | SST25L_STATUS_BP1; + err = spi_write(flash->spi, command, 2); + if (err) + return err; + + if (enable) { + err = sst25l_status(flash, &status); + if (err) + return err; + if (!(status & SST25L_STATUS_WREN)) + return -EROFS; + } + + return 0; +} + +static int sst25l_wait_till_ready(struct sst25l_flash *flash) +{ + unsigned long deadline; + int status, err; + + deadline = jiffies + MAX_READY_WAIT_JIFFIES; + do { + err = sst25l_status(flash, &status); + if (err) + return err; + if (!(status & SST25L_STATUS_BUSY)) + return 0; + + cond_resched(); + } while (!time_after_eq(jiffies, deadline)); + + return -ETIMEDOUT; +} + +static int sst25l_erase_sector(struct sst25l_flash *flash, uint32_t offset) +{ + unsigned char command[4]; + int err; + + err = sst25l_write_enable(flash, 1); + if (err) + return err; + + command[0] = SST25L_CMD_SECTOR_ERASE; + command[1] = offset >> 16; + command[2] = offset >> 8; + command[3] = offset; + err = spi_write(flash->spi, command, 4); + if (err) + return err; + + err = sst25l_wait_till_ready(flash); + if (err) + return err; + + return sst25l_write_enable(flash, 0); +} + +static int sst25l_erase(struct mtd_info *mtd, struct erase_info *instr) +{ + struct sst25l_flash *flash = to_sst25l_flash(mtd); + uint32_t addr, end; + int err; + + /* Sanity checks */ + if (instr->addr + instr->len > flash->mtd.size) + return -EINVAL; + + if ((uint32_t)instr->len % mtd->erasesize) + return -EINVAL; + + if ((uint32_t)instr->addr % mtd->erasesize) + return -EINVAL; + + addr = instr->addr; + end = addr + instr->len; + + mutex_lock(&flash->lock); + + err = sst25l_wait_till_ready(flash); + if (err) { + mutex_unlock(&flash->lock); + return err; + } + + while (addr < end) { + err = sst25l_erase_sector(flash, addr); + if (err) { + mutex_unlock(&flash->lock); + instr->state = MTD_ERASE_FAILED; + dev_err(&flash->spi->dev, "Erase failed\n"); + return err; + } + + addr += mtd->erasesize; + } + + mutex_unlock(&flash->lock); + + instr->state = MTD_ERASE_DONE; + mtd_erase_callback(instr); + return 0; +} + +static int sst25l_read(struct mtd_info *mtd, loff_t from, size_t len, + size_t *retlen, unsigned char *buf) +{ + struct sst25l_flash *flash = to_sst25l_flash(mtd); + struct spi_transfer transfer[2]; + struct spi_message message; + unsigned char command[4]; + int ret; + + /* Sanity checking */ + if (len == 0) + return 0; + + if (from + len > flash->mtd.size) + return -EINVAL; + + if (retlen) + *retlen = 0; + + spi_message_init(&message); + memset(&transfer, 0, sizeof(transfer)); + + command[0] = SST25L_CMD_READ; + command[1] = from >> 16; + command[2] = from >> 8; + command[3] = from; + + transfer[0].tx_buf = command; + transfer[0].len = sizeof(command); + spi_message_add_tail(&transfer[0], &message); + + transfer[1].rx_buf = buf; + transfer[1].len = len; + spi_message_add_tail(&transfer[1], &message); + + mutex_lock(&flash->lock); + + /* Wait for previous write/erase to complete */ + ret = sst25l_wait_till_ready(flash); + if (ret) { + mutex_unlock(&flash->lock); + return ret; + } + + spi_sync(flash->spi, &message); + + if (retlen && message.actual_length > sizeof(command)) + *retlen += message.actual_length - sizeof(command); + + mutex_unlock(&flash->lock); + return 0; +} + +static int sst25l_write(struct mtd_info *mtd, loff_t to, size_t len, + size_t *retlen, const unsigned char *buf) +{ + struct sst25l_flash *flash = to_sst25l_flash(mtd); + int i, j, ret, bytes, copied = 0; + unsigned char command[5]; + + /* Sanity checks */ + if (!len) + return 0; + + if (to + len > flash->mtd.size) + return -EINVAL; + + if ((uint32_t)to % mtd->writesize) + return -EINVAL; + + mutex_lock(&flash->lock); + + ret = sst25l_write_enable(flash, 1); + if (ret) + goto out; + + for (i = 0; i < len; i += mtd->writesize) { + ret = sst25l_wait_till_ready(flash); + if (ret) + goto out; + + /* Write the first byte of the page */ + command[0] = SST25L_CMD_AAI_PROGRAM; + command[1] = (to + i) >> 16; + command[2] = (to + i) >> 8; + command[3] = (to + i); + command[4] = buf[i]; + ret = spi_write(flash->spi, command, 5); + if (ret < 0) + goto out; + copied++; + + /* + * Write the remaining bytes using auto address + * increment mode + */ + bytes = min_t(uint32_t, mtd->writesize, len - i); + for (j = 1; j < bytes; j++, copied++) { + ret = sst25l_wait_till_ready(flash); + if (ret) + goto out; + + command[1] = buf[i + j]; + ret = spi_write(flash->spi, command, 2); + if (ret) + goto out; + } + } + +out: + ret = sst25l_write_enable(flash, 0); + + if (retlen) + *retlen = copied; + + mutex_unlock(&flash->lock); + return ret; +} + +static struct flash_info *__init sst25l_match_device(struct spi_device *spi) +{ + struct flash_info *flash_info = NULL; + unsigned char command[4], response; + int i, err; + uint16_t id; + + command[0] = SST25L_CMD_READ_ID; + command[1] = 0; + command[2] = 0; + command[3] = 0; + err = spi_write_then_read(spi, command, sizeof(command), &response, 1); + if (err < 0) { + dev_err(&spi->dev, "error reading device id msb\n"); + return NULL; + } + + id = response << 8; + + command[0] = SST25L_CMD_READ_ID; + command[1] = 0; + command[2] = 0; + command[3] = 1; + err = spi_write_then_read(spi, command, sizeof(command), &response, 1); + if (err < 0) { + dev_err(&spi->dev, "error reading device id lsb\n"); + return NULL; + } + + id |= response; + + for (i = 0; i < ARRAY_SIZE(sst25l_flash_info); i++) + if (sst25l_flash_info[i].device_id == id) + flash_info = &sst25l_flash_info[i]; + + if (!flash_info) + dev_err(&spi->dev, "unknown id %.4x\n", id); + + return flash_info; +} + +static int __init sst25l_probe(struct spi_device *spi) +{ + struct flash_info *flash_info; + struct sst25l_flash *flash; + struct flash_platform_data *data; + int ret, i; + + flash_info = sst25l_match_device(spi); + if (!flash_info) + return -ENODEV; + + flash = kzalloc(sizeof(struct sst25l_flash), GFP_KERNEL); + if (!flash) + return -ENOMEM; + + flash->spi = spi; + mutex_init(&flash->lock); + dev_set_drvdata(&spi->dev, flash); + + data = spi->dev.platform_data; + if (data && data->name) + flash->mtd.name = data->name; + else + flash->mtd.name = dev_name(&spi->dev); + + flash->mtd.type = MTD_NORFLASH; + flash->mtd.flags = MTD_CAP_NORFLASH; + flash->mtd.erasesize = flash_info->erase_size; + flash->mtd.writesize = flash_info->page_size; + flash->mtd.size = flash_info->page_size * flash_info->nr_pages; + flash->mtd.erase = sst25l_erase; + flash->mtd.read = sst25l_read; + flash->mtd.write = sst25l_write; + + dev_info(&spi->dev, "%s (%lld KiB)\n", flash_info->name, + (long long)flash->mtd.size >> 10); + + DEBUG(MTD_DEBUG_LEVEL2, + "mtd .name = %s, .size = 0x%llx (%lldMiB) " + ".erasesize = 0x%.8x (%uKiB) .numeraseregions = %d\n", + flash->mtd.name, + (long long)flash->mtd.size, (long long)(flash->mtd.size >> 20), + flash->mtd.erasesize, flash->mtd.erasesize / 1024, + flash->mtd.numeraseregions); + + if (flash->mtd.numeraseregions) + for (i = 0; i < flash->mtd.numeraseregions; i++) + DEBUG(MTD_DEBUG_LEVEL2, + "mtd.eraseregions[%d] = { .offset = 0x%llx, " + ".erasesize = 0x%.8x (%uKiB), " + ".numblocks = %d }\n", + i, (long long)flash->mtd.eraseregions[i].offset, + flash->mtd.eraseregions[i].erasesize, + flash->mtd.eraseregions[i].erasesize / 1024, + flash->mtd.eraseregions[i].numblocks); + + if (mtd_has_partitions()) { + struct mtd_partition *parts = NULL; + int nr_parts = 0; + + if (mtd_has_cmdlinepart()) { + static const char *part_probes[] = + {"cmdlinepart", NULL}; + + nr_parts = parse_mtd_partitions(&flash->mtd, + part_probes, + &parts, 0); + } + + if (nr_parts <= 0 && data && data->parts) { + parts = data->parts; + nr_parts = data->nr_parts; + } + + if (nr_parts > 0) { + for (i = 0; i < nr_parts; i++) { + DEBUG(MTD_DEBUG_LEVEL2, "partitions[%d] = " + "{.name = %s, .offset = 0x%llx, " + ".size = 0x%llx (%lldKiB) }\n", + i, parts[i].name, + (long long)parts[i].offset, + (long long)parts[i].size, + (long long)(parts[i].size >> 10)); + } + + flash->partitioned = 1; + return add_mtd_partitions(&flash->mtd, + parts, nr_parts); + } + + } else if (data->nr_parts) { + dev_warn(&spi->dev, "ignoring %d default partitions on %s\n", + data->nr_parts, data->name); + } + + ret = add_mtd_device(&flash->mtd); + if (ret == 1) { + kfree(flash); + dev_set_drvdata(&spi->dev, NULL); + return -ENODEV; + } + + return 0; +} + +static int __exit sst25l_remove(struct spi_device *spi) +{ + struct sst25l_flash *flash = dev_get_drvdata(&spi->dev); + int ret; + + if (mtd_has_partitions() && flash->partitioned) + ret = del_mtd_partitions(&flash->mtd); + else + ret = del_mtd_device(&flash->mtd); + if (ret == 0) + kfree(flash); + return ret; +} + +static struct spi_driver sst25l_driver = { + .driver = { + .name = "sst25l", + .bus = &spi_bus_type, + .owner = THIS_MODULE, + }, + .probe = sst25l_probe, + .remove = __exit_p(sst25l_remove), +}; + +static int __init sst25l_init(void) +{ + return spi_register_driver(&sst25l_driver); +} + +static void __exit sst25l_exit(void) +{ + spi_unregister_driver(&sst25l_driver); +} + +module_init(sst25l_init); +module_exit(sst25l_exit); + +MODULE_DESCRIPTION("MTD SPI driver for SST25L Flash chips"); +MODULE_AUTHOR("Andre Renaud <andre@bluewatersys.com>, " + "Ryan Mallon <ryan@bluewatersys.com>"); +MODULE_LICENSE("GPL"); diff --git a/drivers/mtd/inftlcore.c b/drivers/mtd/inftlcore.c index d8cf29c01cc4..8aca5523a337 100644..100755 --- a/drivers/mtd/inftlcore.c +++ b/drivers/mtd/inftlcore.c @@ -550,7 +550,7 @@ hitused: * waiting to be picked up. We're going to have to fold * a chain to make room. */ - thisEUN = INFTL_makefreeblock(inftl, BLOCK_NIL); + thisEUN = INFTL_makefreeblock(inftl, block); /* * Hopefully we free something, lets try again. diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig index 7a58bd5522fd..3a9a960644b6 100644 --- a/drivers/mtd/maps/Kconfig +++ b/drivers/mtd/maps/Kconfig @@ -484,9 +484,19 @@ config MTD_BFIN_ASYNC If compiled as a module, it will be called bfin-async-flash. +config MTD_GPIO_ADDR + tristate "GPIO-assisted Flash Chip Support" + depends on MTD_COMPLEX_MAPPINGS + select MTD_PARTITIONS + help + Map driver which allows flashes to be partially physically addressed + and assisted by GPIOs. + + If compiled as a module, it will be called gpio-addr-flash. + config MTD_UCLINUX bool "Generic uClinux RAM/ROM filesystem support" - depends on MTD_PARTITIONS && MTD_RAM && !MMU + depends on MTD_PARTITIONS && MTD_RAM=y && !MMU help Map driver to support image based filesystems for uClinux. diff --git a/drivers/mtd/maps/Makefile b/drivers/mtd/maps/Makefile index 5beb0662d724..1d5cf8636723 100644 --- a/drivers/mtd/maps/Makefile +++ b/drivers/mtd/maps/Makefile @@ -58,5 +58,4 @@ obj-$(CONFIG_MTD_PLATRAM) += plat-ram.o obj-$(CONFIG_MTD_OMAP_NOR) += omap_nor.o obj-$(CONFIG_MTD_INTEL_VR_NOR) += intel_vr_nor.o obj-$(CONFIG_MTD_BFIN_ASYNC) += bfin-async-flash.o -obj-$(CONFIG_MTD_RBTX4939) += rbtx4939-flash.o -obj-$(CONFIG_MTD_VMU) += vmu-flash.o +obj-$(CONFIG_MTD_GPIO_ADDR) += gpio-addr-flash.o diff --git a/drivers/mtd/maps/gpio-addr-flash.c b/drivers/mtd/maps/gpio-addr-flash.c new file mode 100644 index 000000000000..44ef9a49a860 --- /dev/null +++ b/drivers/mtd/maps/gpio-addr-flash.c @@ -0,0 +1,311 @@ +/* + * drivers/mtd/maps/gpio-addr-flash.c + * + * Handle the case where a flash device is mostly addressed using physical + * line and supplemented by GPIOs. This way you can hook up say a 8MiB flash + * to a 2MiB memory range and use the GPIOs to select a particular range. + * + * Copyright © 2000 Nicolas Pitre <nico@cam.org> + * Copyright © 2005-2009 Analog Devices Inc. + * + * Enter bugs at http://blackfin.uclinux.org/ + * + * Licensed under the GPL-2 or later. + */ + +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/map.h> +#include <linux/mtd/partitions.h> +#include <linux/mtd/physmap.h> +#include <linux/platform_device.h> +#include <linux/types.h> + +#include <asm/gpio.h> +#include <asm/io.h> + +#define pr_devinit(fmt, args...) ({ static const __devinitconst char __fmt[] = fmt; printk(__fmt, ## args); }) + +#define DRIVER_NAME "gpio-addr-flash" +#define PFX DRIVER_NAME ": " + +/** + * struct async_state - keep GPIO flash state + * @mtd: MTD state for this mapping + * @map: MTD map state for this flash + * @gpio_count: number of GPIOs used to address + * @gpio_addrs: array of GPIOs to twiddle + * @gpio_values: cached GPIO values + * @win_size: dedicated memory size (if no GPIOs) + */ +struct async_state { + struct mtd_info *mtd; + struct map_info map; + size_t gpio_count; + unsigned *gpio_addrs; + int *gpio_values; + unsigned long win_size; +}; +#define gf_map_info_to_state(mi) ((struct async_state *)(mi)->map_priv_1) + +/** + * gf_set_gpios() - set GPIO address lines to access specified flash offset + * @state: GPIO flash state + * @ofs: desired offset to access + * + * Rather than call the GPIO framework every time, cache the last-programmed + * value. This speeds up sequential accesses (which are by far the most common + * type). We rely on the GPIO framework to treat non-zero value as high so + * that we don't have to normalize the bits. + */ +static void gf_set_gpios(struct async_state *state, unsigned long ofs) +{ + size_t i = 0; + int value; + ofs /= state->win_size; + do { + value = ofs & (1 << i); + if (state->gpio_values[i] != value) { + gpio_set_value(state->gpio_addrs[i], value); + state->gpio_values[i] = value; + } + } while (++i < state->gpio_count); +} + +/** + * gf_read() - read a word at the specified offset + * @map: MTD map state + * @ofs: desired offset to read + */ +static map_word gf_read(struct map_info *map, unsigned long ofs) +{ + struct async_state *state = gf_map_info_to_state(map); + uint16_t word; + map_word test; + + gf_set_gpios(state, ofs); + + word = readw(map->virt + (ofs % state->win_size)); + test.x[0] = word; + return test; +} + +/** + * gf_copy_from() - copy a chunk of data from the flash + * @map: MTD map state + * @to: memory to copy to + * @from: flash offset to copy from + * @len: how much to copy + * + * We rely on the MTD layer to chunk up copies such that a single request here + * will not cross a window size. This allows us to only wiggle the GPIOs once + * before falling back to a normal memcpy. Reading the higher layer code shows + * that this is indeed the case, but add a BUG_ON() to future proof. + */ +static void gf_copy_from(struct map_info *map, void *to, unsigned long from, ssize_t len) +{ + struct async_state *state = gf_map_info_to_state(map); + + gf_set_gpios(state, from); + + /* BUG if operation crosses the win_size */ + BUG_ON(!((from + len) % state->win_size <= (from + len))); + + /* operation does not cross the win_size, so one shot it */ + memcpy_fromio(to, map->virt + (from % state->win_size), len); +} + +/** + * gf_write() - write a word at the specified offset + * @map: MTD map state + * @ofs: desired offset to write + */ +static void gf_write(struct map_info *map, map_word d1, unsigned long ofs) +{ + struct async_state *state = gf_map_info_to_state(map); + uint16_t d; + + gf_set_gpios(state, ofs); + + d = d1.x[0]; + writew(d, map->virt + (ofs % state->win_size)); +} + +/** + * gf_copy_to() - copy a chunk of data to the flash + * @map: MTD map state + * @to: flash offset to copy to + * @from: memory to copy from + * @len: how much to copy + * + * See gf_copy_from() caveat. + */ +static void gf_copy_to(struct map_info *map, unsigned long to, const void *from, ssize_t len) +{ + struct async_state *state = gf_map_info_to_state(map); + + gf_set_gpios(state, to); + + /* BUG if operation crosses the win_size */ + BUG_ON(!((to + len) % state->win_size <= (to + len))); + + /* operation does not cross the win_size, so one shot it */ + memcpy_toio(map->virt + (to % state->win_size), from, len); +} + +#ifdef CONFIG_MTD_PARTITIONS +static const char *part_probe_types[] = { "cmdlinepart", "RedBoot", NULL }; +#endif + +/** + * gpio_flash_probe() - setup a mapping for a GPIO assisted flash + * @pdev: platform device + * + * The platform resource layout expected looks something like: + * struct mtd_partition partitions[] = { ... }; + * struct physmap_flash_data flash_data = { ... }; + * unsigned flash_gpios[] = { GPIO_XX, GPIO_XX, ... }; + * struct resource flash_resource[] = { + * { + * .name = "cfi_probe", + * .start = 0x20000000, + * .end = 0x201fffff, + * .flags = IORESOURCE_MEM, + * }, { + * .start = (unsigned long)flash_gpios, + * .end = ARRAY_SIZE(flash_gpios), + * .flags = IORESOURCE_IRQ, + * } + * }; + * struct platform_device flash_device = { + * .name = "gpio-addr-flash", + * .dev = { .platform_data = &flash_data, }, + * .num_resources = ARRAY_SIZE(flash_resource), + * .resource = flash_resource, + * ... + * }; + */ +static int __devinit gpio_flash_probe(struct platform_device *pdev) +{ + int ret; + size_t i, arr_size; + struct physmap_flash_data *pdata; + struct resource *memory; + struct resource *gpios; + struct async_state *state; + + pdata = pdev->dev.platform_data; + memory = platform_get_resource(pdev, IORESOURCE_MEM, 0); + gpios = platform_get_resource(pdev, IORESOURCE_IRQ, 0); + + if (!memory || !gpios || !gpios->end) + return -EINVAL; + + arr_size = sizeof(int) * gpios->end; + state = kzalloc(sizeof(*state) + arr_size, GFP_KERNEL); + if (!state) + return -ENOMEM; + + state->gpio_count = gpios->end; + state->gpio_addrs = (void *)gpios->start; + state->gpio_values = (void *)(state + 1); + state->win_size = memory->end - memory->start + 1; + memset(state->gpio_values, 0xff, arr_size); + + state->map.name = DRIVER_NAME; + state->map.read = gf_read; + state->map.copy_from = gf_copy_from; + state->map.write = gf_write; + state->map.copy_to = gf_copy_to; + state->map.bankwidth = pdata->width; + state->map.size = state->win_size * (1 << state->gpio_count); + state->map.virt = (void __iomem *)memory->start; + state->map.phys = NO_XIP; + state->map.map_priv_1 = (unsigned long)state; + + platform_set_drvdata(pdev, state); + + i = 0; + do { + if (gpio_request(state->gpio_addrs[i], DRIVER_NAME)) { + pr_devinit(KERN_ERR PFX "failed to request gpio %d\n", + state->gpio_addrs[i]); + while (i--) + gpio_free(state->gpio_addrs[i]); + kfree(state); + return -EBUSY; + } + gpio_direction_output(state->gpio_addrs[i], 0); + } while (++i < state->gpio_count); + + pr_devinit(KERN_NOTICE PFX "probing %d-bit flash bus\n", + state->map.bankwidth * 8); + state->mtd = do_map_probe(memory->name, &state->map); + if (!state->mtd) { + for (i = 0; i < state->gpio_count; ++i) + gpio_free(state->gpio_addrs[i]); + kfree(state); + return -ENXIO; + } + +#ifdef CONFIG_MTD_PARTITIONS + ret = parse_mtd_partitions(state->mtd, part_probe_types, &pdata->parts, 0); + if (ret > 0) { + pr_devinit(KERN_NOTICE PFX "Using commandline partition definition\n"); + add_mtd_partitions(state->mtd, pdata->parts, ret); + kfree(pdata->parts); + + } else if (pdata->nr_parts) { + pr_devinit(KERN_NOTICE PFX "Using board partition definition\n"); + add_mtd_partitions(state->mtd, pdata->parts, pdata->nr_parts); + + } else +#endif + { + pr_devinit(KERN_NOTICE PFX "no partition info available, registering whole flash at once\n"); + add_mtd_device(state->mtd); + } + + return 0; +} + +static int __devexit gpio_flash_remove(struct platform_device *pdev) +{ + struct async_state *state = platform_get_drvdata(pdev); + size_t i = 0; + do { + gpio_free(state->gpio_addrs[i]); + } while (++i < state->gpio_count); +#ifdef CONFIG_MTD_PARTITIONS + del_mtd_partitions(state->mtd); +#endif + map_destroy(state->mtd); + kfree(state); + return 0; +} + +static struct platform_driver gpio_flash_driver = { + .probe = gpio_flash_probe, + .remove = __devexit_p(gpio_flash_remove), + .driver = { + .name = DRIVER_NAME, + }, +}; + +static int __init gpio_flash_init(void) +{ + return platform_driver_register(&gpio_flash_driver); +} +module_init(gpio_flash_init); + +static void __exit gpio_flash_exit(void) +{ + platform_driver_unregister(&gpio_flash_driver); +} +module_exit(gpio_flash_exit); + +MODULE_AUTHOR("Mike Frysinger <vapier@gentoo.org>"); +MODULE_DESCRIPTION("MTD map driver for flashes addressed physically and with gpios"); +MODULE_LICENSE("GPL"); diff --git a/drivers/mtd/maps/physmap_of.c b/drivers/mtd/maps/physmap_of.c index 39d357b2eb47..61e4eb48bb2d 100644 --- a/drivers/mtd/maps/physmap_of.c +++ b/drivers/mtd/maps/physmap_of.c @@ -190,6 +190,7 @@ static int __devinit of_flash_probe(struct of_device *dev, const u32 *p; int reg_tuple_size; struct mtd_info **mtd_list = NULL; + resource_size_t res_size; reg_tuple_size = (of_n_addr_cells(dp) + of_n_size_cells(dp)) * sizeof(u32); @@ -204,7 +205,7 @@ static int __devinit of_flash_probe(struct of_device *dev, dev_err(&dev->dev, "Malformed reg property on %s\n", dev->node->full_name); err = -EINVAL; - goto err_out; + goto err_flash_remove; } count /= reg_tuple_size; @@ -212,14 +213,14 @@ static int __devinit of_flash_probe(struct of_device *dev, info = kzalloc(sizeof(struct of_flash) + sizeof(struct of_flash_list) * count, GFP_KERNEL); if (!info) - goto err_out; - - mtd_list = kzalloc(sizeof(struct mtd_info) * count, GFP_KERNEL); - if (!info) - goto err_out; + goto err_flash_remove; dev_set_drvdata(&dev->dev, info); + mtd_list = kzalloc(sizeof(struct mtd_info) * count, GFP_KERNEL); + if (!mtd_list) + goto err_flash_remove; + for (i = 0; i < count; i++) { err = -ENXIO; if (of_address_to_resource(dp, i, &res)) { @@ -233,8 +234,8 @@ static int __devinit of_flash_probe(struct of_device *dev, (unsigned long long)res.end); err = -EBUSY; - info->list[i].res = request_mem_region(res.start, res.end - - res.start + 1, + res_size = resource_size(&res); + info->list[i].res = request_mem_region(res.start, res_size, dev_name(&dev->dev)); if (!info->list[i].res) goto err_out; @@ -249,7 +250,7 @@ static int __devinit of_flash_probe(struct of_device *dev, info->list[i].map.name = dev_name(&dev->dev); info->list[i].map.phys = res.start; - info->list[i].map.size = res.end - res.start + 1; + info->list[i].map.size = res_size; info->list[i].map.bankwidth = *width; err = -ENOMEM; @@ -338,6 +339,7 @@ static int __devinit of_flash_probe(struct of_device *dev, err_out: kfree(mtd_list); +err_flash_remove: of_flash_remove(dev); return err; @@ -360,6 +362,10 @@ static struct of_device_id of_flash_match[] = { .data = (void *)"jedec_probe", }, { + .compatible = "mtd-ram", + .data = (void *)"map_ram", + }, + { .type = "rom", .compatible = "direct-mapped" }, diff --git a/drivers/mtd/maps/plat-ram.c b/drivers/mtd/maps/plat-ram.c index 49c9ece76477..dafb91944e70 100644 --- a/drivers/mtd/maps/plat-ram.c +++ b/drivers/mtd/maps/plat-ram.c @@ -175,7 +175,7 @@ static int platram_probe(struct platform_device *pdev) /* setup map parameters */ info->map.phys = res->start; - info->map.size = (res->end - res->start) + 1; + info->map.size = resource_size(res); info->map.name = pdata->mapname != NULL ? (char *)pdata->mapname : (char *)pdev->name; info->map.bankwidth = pdata->bankwidth; diff --git a/drivers/mtd/maps/pmcmsp-flash.c b/drivers/mtd/maps/pmcmsp-flash.c index 4768bd5459d6..c8fd8da4bc87 100644 --- a/drivers/mtd/maps/pmcmsp-flash.c +++ b/drivers/mtd/maps/pmcmsp-flash.c @@ -50,7 +50,7 @@ static int fcnt; static int __init init_msp_flash(void) { - int i, j; + int i, j, ret = -ENOMEM; int offset, coff; char *env; int pcnt; @@ -75,14 +75,16 @@ static int __init init_msp_flash(void) printk(KERN_NOTICE "Found %d PMC flash devices\n", fcnt); msp_flash = kmalloc(fcnt * sizeof(struct map_info *), GFP_KERNEL); + if (!msp_flash) + return -ENOMEM; + msp_parts = kmalloc(fcnt * sizeof(struct mtd_partition *), GFP_KERNEL); + if (!msp_parts) + goto free_msp_flash; + msp_maps = kcalloc(fcnt, sizeof(struct mtd_info), GFP_KERNEL); - if (!msp_flash || !msp_parts || !msp_maps) { - kfree(msp_maps); - kfree(msp_parts); - kfree(msp_flash); - return -ENOMEM; - } + if (!msp_maps) + goto free_msp_parts; /* loop over the flash devices, initializing each */ for (i = 0; i < fcnt; i++) { @@ -100,13 +102,18 @@ static int __init init_msp_flash(void) msp_parts[i] = kcalloc(pcnt, sizeof(struct mtd_partition), GFP_KERNEL); + if (!msp_parts[i]) + goto cleanup_loop; /* now initialize the devices proper */ flash_name[5] = '0' + i; env = prom_getenv(flash_name); - if (sscanf(env, "%x:%x", &addr, &size) < 2) - return -ENXIO; + if (sscanf(env, "%x:%x", &addr, &size) < 2) { + ret = -ENXIO; + kfree(msp_parts[i]); + goto cleanup_loop; + } addr = CPHYSADDR(addr); printk(KERN_NOTICE @@ -122,13 +129,23 @@ static int __init init_msp_flash(void) */ if (size > CONFIG_MSP_FLASH_MAP_LIMIT) size = CONFIG_MSP_FLASH_MAP_LIMIT; + msp_maps[i].virt = ioremap(addr, size); + if (msp_maps[i].virt == NULL) { + ret = -ENXIO; + kfree(msp_parts[i]); + goto cleanup_loop; + } + msp_maps[i].bankwidth = 1; - msp_maps[i].name = strncpy(kmalloc(7, GFP_KERNEL), - flash_name, 7); + msp_maps[i].name = kmalloc(7, GFP_KERNEL); + if (!msp_maps[i].name) { + iounmap(msp_maps[i].virt); + kfree(msp_parts[i]); + goto cleanup_loop; + } - if (msp_maps[i].virt == NULL) - return -ENXIO; + msp_maps[i].name = strncpy(msp_maps[i].name, flash_name, 7); for (j = 0; j < pcnt; j++) { part_name[5] = '0' + i; @@ -136,8 +153,14 @@ static int __init init_msp_flash(void) env = prom_getenv(part_name); - if (sscanf(env, "%x:%x:%n", &offset, &size, &coff) < 2) - return -ENXIO; + if (sscanf(env, "%x:%x:%n", &offset, &size, + &coff) < 2) { + ret = -ENXIO; + kfree(msp_maps[i].name); + iounmap(msp_maps[i].virt); + kfree(msp_parts[i]); + goto cleanup_loop; + } msp_parts[i][j].size = size; msp_parts[i][j].offset = offset; @@ -152,18 +175,37 @@ static int __init init_msp_flash(void) add_mtd_partitions(msp_flash[i], msp_parts[i], pcnt); } else { printk(KERN_ERR "map probe failed for flash\n"); - return -ENXIO; + ret = -ENXIO; + kfree(msp_maps[i].name); + iounmap(msp_maps[i].virt); + kfree(msp_parts[i]); + goto cleanup_loop; } } return 0; + +cleanup_loop: + while (i--) { + del_mtd_partitions(msp_flash[i]); + map_destroy(msp_flash[i]); + kfree(msp_maps[i].name); + iounmap(msp_maps[i].virt); + kfree(msp_parts[i]); + } + kfree(msp_maps); +free_msp_parts: + kfree(msp_parts); +free_msp_flash: + kfree(msp_flash); + return ret; } static void __exit cleanup_msp_flash(void) { int i; - for (i = 0; i < sizeof(msp_flash) / sizeof(struct mtd_info **); i++) { + for (i = 0; i < fcnt; i++) { del_mtd_partitions(msp_flash[i]); map_destroy(msp_flash[i]); iounmap((void *)msp_maps[i].virt); diff --git a/drivers/mtd/maps/uclinux.c b/drivers/mtd/maps/uclinux.c index d4314fb88212..35009294b435 100644 --- a/drivers/mtd/maps/uclinux.c +++ b/drivers/mtd/maps/uclinux.c @@ -89,7 +89,11 @@ static int __init uclinux_mtd_init(void) mtd->priv = mapp; uclinux_ram_mtdinfo = mtd; +#ifdef CONFIG_MTD_PARTITIONS add_mtd_partitions(mtd, uclinux_romfs, NUM_PARTITIONS); +#else + add_mtd_device(mtd); +#endif return(0); } @@ -99,7 +103,11 @@ static int __init uclinux_mtd_init(void) static void __exit uclinux_mtd_cleanup(void) { if (uclinux_ram_mtdinfo) { +#ifdef CONFIG_MTD_PARTITIONS del_mtd_partitions(uclinux_ram_mtdinfo); +#else + del_mtd_device(uclinux_ram_mtdinfo); +#endif map_destroy(uclinux_ram_mtdinfo); uclinux_ram_mtdinfo = NULL; } diff --git a/drivers/mtd/mtdblock.c b/drivers/mtd/mtdblock.c index 2d70295a5fa3..9f41b1a853c1 100644 --- a/drivers/mtd/mtdblock.c +++ b/drivers/mtd/mtdblock.c @@ -84,7 +84,7 @@ static int erase_write (struct mtd_info *mtd, unsigned long pos, remove_wait_queue(&wait_q, &wait); /* - * Next, writhe data to flash. + * Next, write the data to flash. */ ret = mtd->write(mtd, pos, len, &retlen, buf); diff --git a/drivers/mtd/mtdconcat.c b/drivers/mtd/mtdconcat.c index 792b547786b8..db6de74082ad 100644 --- a/drivers/mtd/mtdconcat.c +++ b/drivers/mtd/mtdconcat.c @@ -427,7 +427,7 @@ static int concat_erase(struct mtd_info *mtd, struct erase_info *instr) * to-be-erased area begins. Verify that the starting * offset is aligned to this region's erase size: */ - if (instr->addr & (erase_regions[i].erasesize - 1)) + if (i < 0 || instr->addr & (erase_regions[i].erasesize - 1)) return -EINVAL; /* @@ -440,8 +440,8 @@ static int concat_erase(struct mtd_info *mtd, struct erase_info *instr) /* * check if the ending offset is aligned to this region's erase size */ - if ((instr->addr + instr->len) & (erase_regions[i].erasesize - - 1)) + if (i < 0 || ((instr->addr + instr->len) & + (erase_regions[i].erasesize - 1))) return -EINVAL; } diff --git a/drivers/mtd/mtdcore.c b/drivers/mtd/mtdcore.c index 69007a6eff50..467a4f177bfb 100644 --- a/drivers/mtd/mtdcore.c +++ b/drivers/mtd/mtdcore.c @@ -213,11 +213,11 @@ static struct attribute *mtd_attrs[] = { NULL, }; -struct attribute_group mtd_group = { +static struct attribute_group mtd_group = { .attrs = mtd_attrs, }; -const struct attribute_group *mtd_groups[] = { +static const struct attribute_group *mtd_groups[] = { &mtd_group, NULL, }; diff --git a/drivers/mtd/mtdpart.c b/drivers/mtd/mtdpart.c index 742504ea96f5..b8043a9ba32d 100644 --- a/drivers/mtd/mtdpart.c +++ b/drivers/mtd/mtdpart.c @@ -453,7 +453,8 @@ static struct mtd_part *add_one_partition(struct mtd_info *master, for (i = 0; i < max && regions[i].offset <= slave->offset; i++) ; /* The loop searched for the region _behind_ the first one */ - i--; + if (i > 0) + i--; /* Pick biggest erasesize */ for (; i < max && regions[i].offset < end; i++) { diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig index ce96c091f01b..2fda0b615246 100644 --- a/drivers/mtd/nand/Kconfig +++ b/drivers/mtd/nand/Kconfig @@ -80,6 +80,23 @@ config MTD_NAND_OMAP2 help Support for NAND flash on Texas Instruments OMAP2 and OMAP3 platforms. +config MTD_NAND_OMAP_PREFETCH + bool "GPMC prefetch support for NAND Flash device" + depends on MTD_NAND && MTD_NAND_OMAP2 + default y + help + The NAND device can be accessed for Read/Write using GPMC PREFETCH engine + to improve the performance. + +config MTD_NAND_OMAP_PREFETCH_DMA + depends on MTD_NAND_OMAP_PREFETCH + bool "DMA mode" + default n + help + The GPMC PREFETCH engine can be configured eigther in MPU interrupt mode + or in DMA interrupt mode. + Say y for DMA mode or MPU mode will be used + config MTD_NAND_TS7250 tristate "NAND Flash device on TS-7250 board" depends on MACH_TS72XX @@ -426,6 +443,12 @@ config MTD_NAND_MXC This enables the driver for the NAND flash controller on the MXC processors. +config MTD_NAND_NOMADIK + tristate "ST Nomadik 8815 NAND support" + depends on ARCH_NOMADIK + help + Driver for the NAND flash controller on the Nomadik, with ECC. + config MTD_NAND_SH_FLCTL tristate "Support for NAND on Renesas SuperH FLCTL" depends on MTD_NAND && SUPERH && CPU_SUBTYPE_SH7723 @@ -452,4 +475,11 @@ config MTD_NAND_SOCRATES help Enables support for NAND Flash chips wired onto Socrates board. +config MTD_NAND_W90P910 + tristate "Support for NAND on w90p910 evaluation board." + depends on ARCH_W90X900 && MTD_PARTITIONS + help + This enables the driver for the NAND Flash on evaluation board based + on w90p910. + endif # MTD_NAND diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile index f3a786b3cff3..6950d3dabf10 100644 --- a/drivers/mtd/nand/Makefile +++ b/drivers/mtd/nand/Makefile @@ -40,5 +40,7 @@ obj-$(CONFIG_MTD_NAND_SH_FLCTL) += sh_flctl.o obj-$(CONFIG_MTD_NAND_MXC) += mxc_nand.o obj-$(CONFIG_MTD_NAND_SOCRATES) += socrates_nand.o obj-$(CONFIG_MTD_NAND_TXX9NDFMC) += txx9ndfmc.o +obj-$(CONFIG_MTD_NAND_W90P910) += w90p910_nand.o +obj-$(CONFIG_MTD_NAND_NOMADIK) += nomadik_nand.o nand-objs := nand_base.o nand_bbt.o diff --git a/drivers/mtd/nand/atmel_nand.c b/drivers/mtd/nand/atmel_nand.c index 20c828ba9405..f8e9975c86e5 100644 --- a/drivers/mtd/nand/atmel_nand.c +++ b/drivers/mtd/nand/atmel_nand.c @@ -218,7 +218,7 @@ static int atmel_nand_calculate(struct mtd_info *mtd, * buf: buffer to store read data */ static int atmel_nand_read_page(struct mtd_info *mtd, - struct nand_chip *chip, uint8_t *buf) + struct nand_chip *chip, uint8_t *buf, int page) { int eccsize = chip->ecc.size; int eccbytes = chip->ecc.bytes; diff --git a/drivers/mtd/nand/cafe_nand.c b/drivers/mtd/nand/cafe_nand.c index 1b4690bdfdb3..c828d9ac7bd7 100644 --- a/drivers/mtd/nand/cafe_nand.c +++ b/drivers/mtd/nand/cafe_nand.c @@ -381,7 +381,7 @@ static int cafe_nand_read_oob(struct mtd_info *mtd, struct nand_chip *chip, * we need a special oob layout and handling. */ static int cafe_nand_read_page(struct mtd_info *mtd, struct nand_chip *chip, - uint8_t *buf) + uint8_t *buf, int page) { struct cafe_priv *cafe = mtd->priv; diff --git a/drivers/mtd/nand/davinci_nand.c b/drivers/mtd/nand/davinci_nand.c index 0fad6487e6f4..f13f5b9afaf7 100644 --- a/drivers/mtd/nand/davinci_nand.c +++ b/drivers/mtd/nand/davinci_nand.c @@ -348,6 +348,12 @@ compare: if (!(syndrome[0] | syndrome[1] | syndrome[2] | syndrome[3])) return 0; + /* + * Clear any previous address calculation by doing a dummy read of an + * error address register. + */ + davinci_nand_readl(info, NAND_ERR_ADD1_OFFSET); + /* Start address calculation, and wait for it to complete. * We _could_ start reading more data while this is working, * to speed up the overall page read. @@ -359,8 +365,10 @@ compare: switch ((fsr >> 8) & 0x0f) { case 0: /* no error, should not happen */ + davinci_nand_readl(info, NAND_ERR_ERRVAL1_OFFSET); return 0; case 1: /* five or more errors detected */ + davinci_nand_readl(info, NAND_ERR_ERRVAL1_OFFSET); return -EIO; case 2: /* error addresses computed */ case 3: @@ -500,6 +508,26 @@ static struct nand_ecclayout hwecc4_small __initconst = { }, }; +/* An ECC layout for using 4-bit ECC with large-page (2048bytes) flash, + * storing ten ECC bytes plus the manufacturer's bad block marker byte, + * and not overlapping the default BBT markers. + */ +static struct nand_ecclayout hwecc4_2048 __initconst = { + .eccbytes = 40, + .eccpos = { + /* at the end of spare sector */ + 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, + 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, + 44, 45, 46, 47, 48, 49, 50, 51, 52, 53, + 54, 55, 56, 57, 58, 59, 60, 61, 62, 63, + }, + .oobfree = { + /* 2 bytes at offset 0 hold manufacturer badblock markers */ + {.offset = 2, .length = 22, }, + /* 5 bytes at offset 8 hold BBT markers */ + /* 8 bytes at offset 16 hold JFFS2 clean markers */ + }, +}; static int __init nand_davinci_probe(struct platform_device *pdev) { @@ -690,15 +718,20 @@ static int __init nand_davinci_probe(struct platform_device *pdev) info->mtd.oobsize - 16; goto syndrome_done; } + if (chunks == 4) { + info->ecclayout = hwecc4_2048; + info->chip.ecc.mode = NAND_ECC_HW_OOB_FIRST; + goto syndrome_done; + } - /* For large page chips we'll be wanting to use a - * not-yet-implemented mode that reads OOB data - * before reading the body of the page, to avoid - * the "infix OOB" model of NAND_ECC_HW_SYNDROME - * (and preserve manufacturer badblock markings). + /* 4KiB page chips are not yet supported. The eccpos from + * nand_ecclayout cannot hold 80 bytes and change to eccpos[] + * breaks userspace ioctl interface with mtd-utils. Once we + * resolve this issue, NAND_ECC_HW_OOB_FIRST mode can be used + * for the 4KiB page chips. */ dev_warn(&pdev->dev, "no 4-bit ECC support yet " - "for large page NAND\n"); + "for 4KiB-page NAND\n"); ret = -EIO; goto err_scan; diff --git a/drivers/mtd/nand/fsl_elbc_nand.c b/drivers/mtd/nand/fsl_elbc_nand.c index 1f6eb2578717..ddd37d2554ed 100644 --- a/drivers/mtd/nand/fsl_elbc_nand.c +++ b/drivers/mtd/nand/fsl_elbc_nand.c @@ -739,7 +739,8 @@ static int fsl_elbc_chip_init_tail(struct mtd_info *mtd) static int fsl_elbc_read_page(struct mtd_info *mtd, struct nand_chip *chip, - uint8_t *buf) + uint8_t *buf, + int page) { fsl_elbc_read_buf(mtd, buf, mtd->writesize); fsl_elbc_read_buf(mtd, chip->oob_poi, mtd->oobsize); diff --git a/drivers/mtd/nand/mxc_nand.c b/drivers/mtd/nand/mxc_nand.c index 76beea40d2cf..65b26d5a5c0d 100644 --- a/drivers/mtd/nand/mxc_nand.c +++ b/drivers/mtd/nand/mxc_nand.c @@ -857,6 +857,17 @@ static void mxc_nand_command(struct mtd_info *mtd, unsigned command, } } +/* Define some generic bad / good block scan pattern which are used + * while scanning a device for factory marked good / bad blocks. */ +static uint8_t scan_ff_pattern[] = { 0xff, 0xff }; + +static struct nand_bbt_descr smallpage_memorybased = { + .options = NAND_BBT_SCAN2NDPAGE, + .offs = 5, + .len = 1, + .pattern = scan_ff_pattern +}; + static int __init mxcnd_probe(struct platform_device *pdev) { struct nand_chip *this; @@ -973,7 +984,10 @@ static int __init mxcnd_probe(struct platform_device *pdev) goto escan; } - host->pagesize_2k = (mtd->writesize == 2048) ? 1 : 0; + if (mtd->writesize == 2048) { + host->pagesize_2k = 1; + this->badblock_pattern = &smallpage_memorybased; + } if (this->ecc.mode == NAND_ECC_HW) { switch (mtd->oobsize) { diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c index 8c21b89d2d0c..22113865438b 100644 --- a/drivers/mtd/nand/nand_base.c +++ b/drivers/mtd/nand/nand_base.c @@ -688,8 +688,7 @@ nand_get_device(struct nand_chip *chip, struct mtd_info *mtd, int new_state) retry: spin_lock(lock); - /* Hardware controller shared among independend devices */ - /* Hardware controller shared among independend devices */ + /* Hardware controller shared among independent devices */ if (!chip->controller->active) chip->controller->active = chip; @@ -766,7 +765,7 @@ static int nand_wait(struct mtd_info *mtd, struct nand_chip *chip) * Not for syndrome calculating ecc controllers, which use a special oob layout */ static int nand_read_page_raw(struct mtd_info *mtd, struct nand_chip *chip, - uint8_t *buf) + uint8_t *buf, int page) { chip->read_buf(mtd, buf, mtd->writesize); chip->read_buf(mtd, chip->oob_poi, mtd->oobsize); @@ -782,7 +781,7 @@ static int nand_read_page_raw(struct mtd_info *mtd, struct nand_chip *chip, * We need a special oob layout and handling even when OOB isn't used. */ static int nand_read_page_raw_syndrome(struct mtd_info *mtd, struct nand_chip *chip, - uint8_t *buf) + uint8_t *buf, int page) { int eccsize = chip->ecc.size; int eccbytes = chip->ecc.bytes; @@ -821,7 +820,7 @@ static int nand_read_page_raw_syndrome(struct mtd_info *mtd, struct nand_chip *c * @buf: buffer to store read data */ static int nand_read_page_swecc(struct mtd_info *mtd, struct nand_chip *chip, - uint8_t *buf) + uint8_t *buf, int page) { int i, eccsize = chip->ecc.size; int eccbytes = chip->ecc.bytes; @@ -831,7 +830,7 @@ static int nand_read_page_swecc(struct mtd_info *mtd, struct nand_chip *chip, uint8_t *ecc_code = chip->buffers->ecccode; uint32_t *eccpos = chip->ecc.layout->eccpos; - chip->ecc.read_page_raw(mtd, chip, buf); + chip->ecc.read_page_raw(mtd, chip, buf, page); for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize) chip->ecc.calculate(mtd, p, &ecc_calc[i]); @@ -944,7 +943,7 @@ static int nand_read_subpage(struct mtd_info *mtd, struct nand_chip *chip, uint3 * Not for syndrome calculating ecc controllers which need a special oob layout */ static int nand_read_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip, - uint8_t *buf) + uint8_t *buf, int page) { int i, eccsize = chip->ecc.size; int eccbytes = chip->ecc.bytes; @@ -980,6 +979,54 @@ static int nand_read_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip, } /** + * nand_read_page_hwecc_oob_first - [REPLACABLE] hw ecc, read oob first + * @mtd: mtd info structure + * @chip: nand chip info structure + * @buf: buffer to store read data + * + * Hardware ECC for large page chips, require OOB to be read first. + * For this ECC mode, the write_page method is re-used from ECC_HW. + * These methods read/write ECC from the OOB area, unlike the + * ECC_HW_SYNDROME support with multiple ECC steps, follows the + * "infix ECC" scheme and reads/writes ECC from the data area, by + * overwriting the NAND manufacturer bad block markings. + */ +static int nand_read_page_hwecc_oob_first(struct mtd_info *mtd, + struct nand_chip *chip, uint8_t *buf, int page) +{ + int i, eccsize = chip->ecc.size; + int eccbytes = chip->ecc.bytes; + int eccsteps = chip->ecc.steps; + uint8_t *p = buf; + uint8_t *ecc_code = chip->buffers->ecccode; + uint32_t *eccpos = chip->ecc.layout->eccpos; + uint8_t *ecc_calc = chip->buffers->ecccalc; + + /* Read the OOB area first */ + chip->cmdfunc(mtd, NAND_CMD_READOOB, 0, page); + chip->read_buf(mtd, chip->oob_poi, mtd->oobsize); + chip->cmdfunc(mtd, NAND_CMD_READ0, 0, page); + + for (i = 0; i < chip->ecc.total; i++) + ecc_code[i] = chip->oob_poi[eccpos[i]]; + + for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize) { + int stat; + + chip->ecc.hwctl(mtd, NAND_ECC_READ); + chip->read_buf(mtd, p, eccsize); + chip->ecc.calculate(mtd, p, &ecc_calc[i]); + + stat = chip->ecc.correct(mtd, p, &ecc_code[i], NULL); + if (stat < 0) + mtd->ecc_stats.failed++; + else + mtd->ecc_stats.corrected += stat; + } + return 0; +} + +/** * nand_read_page_syndrome - [REPLACABLE] hardware ecc syndrom based page read * @mtd: mtd info structure * @chip: nand chip info structure @@ -989,7 +1036,7 @@ static int nand_read_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip, * we need a special oob layout and handling. */ static int nand_read_page_syndrome(struct mtd_info *mtd, struct nand_chip *chip, - uint8_t *buf) + uint8_t *buf, int page) { int i, eccsize = chip->ecc.size; int eccbytes = chip->ecc.bytes; @@ -1131,11 +1178,13 @@ static int nand_do_read_ops(struct mtd_info *mtd, loff_t from, /* Now read the page into the buffer */ if (unlikely(ops->mode == MTD_OOB_RAW)) - ret = chip->ecc.read_page_raw(mtd, chip, bufpoi); + ret = chip->ecc.read_page_raw(mtd, chip, + bufpoi, page); else if (!aligned && NAND_SUBPAGE_READ(chip) && !oob) ret = chip->ecc.read_subpage(mtd, chip, col, bytes, bufpoi); else - ret = chip->ecc.read_page(mtd, chip, bufpoi); + ret = chip->ecc.read_page(mtd, chip, bufpoi, + page); if (ret < 0) break; @@ -1413,8 +1462,8 @@ static int nand_do_read_oob(struct mtd_info *mtd, loff_t from, int len; uint8_t *buf = ops->oobbuf; - DEBUG(MTD_DEBUG_LEVEL3, "nand_read_oob: from = 0x%08Lx, len = %i\n", - (unsigned long long)from, readlen); + DEBUG(MTD_DEBUG_LEVEL3, "%s: from = 0x%08Lx, len = %i\n", + __func__, (unsigned long long)from, readlen); if (ops->mode == MTD_OOB_AUTO) len = chip->ecc.layout->oobavail; @@ -1422,8 +1471,8 @@ static int nand_do_read_oob(struct mtd_info *mtd, loff_t from, len = mtd->oobsize; if (unlikely(ops->ooboffs >= len)) { - DEBUG(MTD_DEBUG_LEVEL0, "nand_read_oob: " - "Attempt to start read outside oob\n"); + DEBUG(MTD_DEBUG_LEVEL0, "%s: Attempt to start read " + "outside oob\n", __func__); return -EINVAL; } @@ -1431,8 +1480,8 @@ static int nand_do_read_oob(struct mtd_info *mtd, loff_t from, if (unlikely(from >= mtd->size || ops->ooboffs + readlen > ((mtd->size >> chip->page_shift) - (from >> chip->page_shift)) * len)) { - DEBUG(MTD_DEBUG_LEVEL0, "nand_read_oob: " - "Attempt read beyond end of device\n"); + DEBUG(MTD_DEBUG_LEVEL0, "%s: Attempt read beyond end " + "of device\n", __func__); return -EINVAL; } @@ -1506,8 +1555,8 @@ static int nand_read_oob(struct mtd_info *mtd, loff_t from, /* Do not allow reads past end of device */ if (ops->datbuf && (from + ops->len) > mtd->size) { - DEBUG(MTD_DEBUG_LEVEL0, "nand_read_oob: " - "Attempt read beyond end of device\n"); + DEBUG(MTD_DEBUG_LEVEL0, "%s: Attempt read " + "beyond end of device\n", __func__); return -EINVAL; } @@ -1816,8 +1865,8 @@ static int nand_do_write_ops(struct mtd_info *mtd, loff_t to, /* reject writes, which are not page aligned */ if (NOTALIGNED(to) || NOTALIGNED(ops->len)) { - printk(KERN_NOTICE "nand_write: " - "Attempt to write not page aligned data\n"); + printk(KERN_NOTICE "%s: Attempt to write not " + "page aligned data\n", __func__); return -EINVAL; } @@ -1944,8 +1993,8 @@ static int nand_do_write_oob(struct mtd_info *mtd, loff_t to, int chipnr, page, status, len; struct nand_chip *chip = mtd->priv; - DEBUG(MTD_DEBUG_LEVEL3, "nand_write_oob: to = 0x%08x, len = %i\n", - (unsigned int)to, (int)ops->ooblen); + DEBUG(MTD_DEBUG_LEVEL3, "%s: to = 0x%08x, len = %i\n", + __func__, (unsigned int)to, (int)ops->ooblen); if (ops->mode == MTD_OOB_AUTO) len = chip->ecc.layout->oobavail; @@ -1954,14 +2003,14 @@ static int nand_do_write_oob(struct mtd_info *mtd, loff_t to, /* Do not allow write past end of page */ if ((ops->ooboffs + ops->ooblen) > len) { - DEBUG(MTD_DEBUG_LEVEL0, "nand_write_oob: " - "Attempt to write past end of page\n"); + DEBUG(MTD_DEBUG_LEVEL0, "%s: Attempt to write " + "past end of page\n", __func__); return -EINVAL; } if (unlikely(ops->ooboffs >= len)) { - DEBUG(MTD_DEBUG_LEVEL0, "nand_do_write_oob: " - "Attempt to start write outside oob\n"); + DEBUG(MTD_DEBUG_LEVEL0, "%s: Attempt to start " + "write outside oob\n", __func__); return -EINVAL; } @@ -1970,8 +2019,8 @@ static int nand_do_write_oob(struct mtd_info *mtd, loff_t to, ops->ooboffs + ops->ooblen > ((mtd->size >> chip->page_shift) - (to >> chip->page_shift)) * len)) { - DEBUG(MTD_DEBUG_LEVEL0, "nand_do_write_oob: " - "Attempt write beyond end of device\n"); + DEBUG(MTD_DEBUG_LEVEL0, "%s: Attempt write beyond " + "end of device\n", __func__); return -EINVAL; } @@ -2026,8 +2075,8 @@ static int nand_write_oob(struct mtd_info *mtd, loff_t to, /* Do not allow writes past end of device */ if (ops->datbuf && (to + ops->len) > mtd->size) { - DEBUG(MTD_DEBUG_LEVEL0, "nand_write_oob: " - "Attempt write beyond end of device\n"); + DEBUG(MTD_DEBUG_LEVEL0, "%s: Attempt write beyond " + "end of device\n", __func__); return -EINVAL; } @@ -2117,26 +2166,27 @@ int nand_erase_nand(struct mtd_info *mtd, struct erase_info *instr, unsigned int bbt_masked_page = 0xffffffff; loff_t len; - DEBUG(MTD_DEBUG_LEVEL3, "nand_erase: start = 0x%012llx, len = %llu\n", - (unsigned long long)instr->addr, (unsigned long long)instr->len); + DEBUG(MTD_DEBUG_LEVEL3, "%s: start = 0x%012llx, len = %llu\n", + __func__, (unsigned long long)instr->addr, + (unsigned long long)instr->len); /* Start address must align on block boundary */ if (instr->addr & ((1 << chip->phys_erase_shift) - 1)) { - DEBUG(MTD_DEBUG_LEVEL0, "nand_erase: Unaligned address\n"); + DEBUG(MTD_DEBUG_LEVEL0, "%s: Unaligned address\n", __func__); return -EINVAL; } /* Length must align on block boundary */ if (instr->len & ((1 << chip->phys_erase_shift) - 1)) { - DEBUG(MTD_DEBUG_LEVEL0, "nand_erase: " - "Length not block aligned\n"); + DEBUG(MTD_DEBUG_LEVEL0, "%s: Length not block aligned\n", + __func__); return -EINVAL; } /* Do not allow erase past end of device */ if ((instr->len + instr->addr) > mtd->size) { - DEBUG(MTD_DEBUG_LEVEL0, "nand_erase: " - "Erase past end of device\n"); + DEBUG(MTD_DEBUG_LEVEL0, "%s: Erase past end of device\n", + __func__); return -EINVAL; } @@ -2157,8 +2207,8 @@ int nand_erase_nand(struct mtd_info *mtd, struct erase_info *instr, /* Check, if it is write protected */ if (nand_check_wp(mtd)) { - DEBUG(MTD_DEBUG_LEVEL0, "nand_erase: " - "Device is write protected!!!\n"); + DEBUG(MTD_DEBUG_LEVEL0, "%s: Device is write protected!!!\n", + __func__); instr->state = MTD_ERASE_FAILED; goto erase_exit; } @@ -2183,8 +2233,8 @@ int nand_erase_nand(struct mtd_info *mtd, struct erase_info *instr, */ if (nand_block_checkbad(mtd, ((loff_t) page) << chip->page_shift, 0, allowbbt)) { - printk(KERN_WARNING "nand_erase: attempt to erase a " - "bad block at page 0x%08x\n", page); + printk(KERN_WARNING "%s: attempt to erase a bad block " + "at page 0x%08x\n", __func__, page); instr->state = MTD_ERASE_FAILED; goto erase_exit; } @@ -2211,8 +2261,8 @@ int nand_erase_nand(struct mtd_info *mtd, struct erase_info *instr, /* See if block erase succeeded */ if (status & NAND_STATUS_FAIL) { - DEBUG(MTD_DEBUG_LEVEL0, "nand_erase: " - "Failed erase, page 0x%08x\n", page); + DEBUG(MTD_DEBUG_LEVEL0, "%s: Failed erase, " + "page 0x%08x\n", __func__, page); instr->state = MTD_ERASE_FAILED; instr->fail_addr = ((loff_t)page << chip->page_shift); @@ -2272,9 +2322,9 @@ int nand_erase_nand(struct mtd_info *mtd, struct erase_info *instr, if (!rewrite_bbt[chipnr]) continue; /* update the BBT for chip */ - DEBUG(MTD_DEBUG_LEVEL0, "nand_erase_nand: nand_update_bbt " - "(%d:0x%0llx 0x%0x)\n", chipnr, rewrite_bbt[chipnr], - chip->bbt_td->pages[chipnr]); + DEBUG(MTD_DEBUG_LEVEL0, "%s: nand_update_bbt " + "(%d:0x%0llx 0x%0x)\n", __func__, chipnr, + rewrite_bbt[chipnr], chip->bbt_td->pages[chipnr]); nand_update_bbt(mtd, rewrite_bbt[chipnr]); } @@ -2292,7 +2342,7 @@ static void nand_sync(struct mtd_info *mtd) { struct nand_chip *chip = mtd->priv; - DEBUG(MTD_DEBUG_LEVEL3, "nand_sync: called\n"); + DEBUG(MTD_DEBUG_LEVEL3, "%s: called\n", __func__); /* Grab the lock and see if the device is available */ nand_get_device(chip, mtd, FL_SYNCING); @@ -2356,8 +2406,8 @@ static void nand_resume(struct mtd_info *mtd) if (chip->state == FL_PM_SUSPENDED) nand_release_device(mtd); else - printk(KERN_ERR "nand_resume() called for a chip which is not " - "in suspended state\n"); + printk(KERN_ERR "%s called for a chip which is not " + "in suspended state\n", __func__); } /* @@ -2671,6 +2721,17 @@ int nand_scan_tail(struct mtd_info *mtd) */ switch (chip->ecc.mode) { + case NAND_ECC_HW_OOB_FIRST: + /* Similar to NAND_ECC_HW, but a separate read_page handle */ + if (!chip->ecc.calculate || !chip->ecc.correct || + !chip->ecc.hwctl) { + printk(KERN_WARNING "No ECC functions supplied; " + "Hardware ECC not possible\n"); + BUG(); + } + if (!chip->ecc.read_page) + chip->ecc.read_page = nand_read_page_hwecc_oob_first; + case NAND_ECC_HW: /* Use standard hwecc read page function ? */ if (!chip->ecc.read_page) @@ -2693,7 +2754,7 @@ int nand_scan_tail(struct mtd_info *mtd) chip->ecc.read_page == nand_read_page_hwecc || !chip->ecc.write_page || chip->ecc.write_page == nand_write_page_hwecc)) { - printk(KERN_WARNING "No ECC functions supplied, " + printk(KERN_WARNING "No ECC functions supplied; " "Hardware ECC not possible\n"); BUG(); } @@ -2728,7 +2789,8 @@ int nand_scan_tail(struct mtd_info *mtd) chip->ecc.write_page_raw = nand_write_page_raw; chip->ecc.read_oob = nand_read_oob_std; chip->ecc.write_oob = nand_write_oob_std; - chip->ecc.size = 256; + if (!chip->ecc.size) + chip->ecc.size = 256; chip->ecc.bytes = 3; break; @@ -2858,7 +2920,8 @@ int nand_scan(struct mtd_info *mtd, int maxchips) /* Many callers got this wrong, so check for it for a while... */ if (!mtd->owner && caller_is_module()) { - printk(KERN_CRIT "nand_scan() called with NULL mtd->owner!\n"); + printk(KERN_CRIT "%s called with NULL mtd->owner!\n", + __func__); BUG(); } diff --git a/drivers/mtd/nand/nand_ecc.c b/drivers/mtd/nand/nand_ecc.c index c0cb87d6d16e..db7ae9d6a296 100644 --- a/drivers/mtd/nand/nand_ecc.c +++ b/drivers/mtd/nand/nand_ecc.c @@ -417,22 +417,22 @@ int nand_calculate_ecc(struct mtd_info *mtd, const unsigned char *buf, EXPORT_SYMBOL(nand_calculate_ecc); /** - * nand_correct_data - [NAND Interface] Detect and correct bit error(s) - * @mtd: MTD block structure + * __nand_correct_data - [NAND Interface] Detect and correct bit error(s) * @buf: raw data read from the chip * @read_ecc: ECC from the chip * @calc_ecc: the ECC calculated from raw data + * @eccsize: data bytes per ecc step (256 or 512) * - * Detect and correct a 1 bit error for 256/512 byte block + * Detect and correct a 1 bit error for eccsize byte block */ -int nand_correct_data(struct mtd_info *mtd, unsigned char *buf, - unsigned char *read_ecc, unsigned char *calc_ecc) +int __nand_correct_data(unsigned char *buf, + unsigned char *read_ecc, unsigned char *calc_ecc, + unsigned int eccsize) { unsigned char b0, b1, b2, bit_addr; unsigned int byte_addr; /* 256 or 512 bytes/ecc */ - const uint32_t eccsize_mult = - (((struct nand_chip *)mtd->priv)->ecc.size) >> 8; + const uint32_t eccsize_mult = eccsize >> 8; /* * b0 to b2 indicate which bit is faulty (if any) @@ -495,6 +495,23 @@ int nand_correct_data(struct mtd_info *mtd, unsigned char *buf, printk(KERN_ERR "uncorrectable error : "); return -1; } +EXPORT_SYMBOL(__nand_correct_data); + +/** + * nand_correct_data - [NAND Interface] Detect and correct bit error(s) + * @mtd: MTD block structure + * @buf: raw data read from the chip + * @read_ecc: ECC from the chip + * @calc_ecc: the ECC calculated from raw data + * + * Detect and correct a 1 bit error for 256/512 byte block + */ +int nand_correct_data(struct mtd_info *mtd, unsigned char *buf, + unsigned char *read_ecc, unsigned char *calc_ecc) +{ + return __nand_correct_data(buf, read_ecc, calc_ecc, + ((struct nand_chip *)mtd->priv)->ecc.size); +} EXPORT_SYMBOL(nand_correct_data); MODULE_LICENSE("GPL"); diff --git a/drivers/mtd/nand/ndfc.c b/drivers/mtd/nand/ndfc.c index 89bf85af642c..40b5658bdbe6 100644 --- a/drivers/mtd/nand/ndfc.c +++ b/drivers/mtd/nand/ndfc.c @@ -102,8 +102,8 @@ static int ndfc_calculate_ecc(struct mtd_info *mtd, wmb(); ecc = in_be32(ndfc->ndfcbase + NDFC_ECC); /* The NDFC uses Smart Media (SMC) bytes order */ - ecc_code[0] = p[2]; - ecc_code[1] = p[1]; + ecc_code[0] = p[1]; + ecc_code[1] = p[2]; ecc_code[2] = p[3]; return 0; diff --git a/drivers/mtd/nand/nomadik_nand.c b/drivers/mtd/nand/nomadik_nand.c new file mode 100644 index 000000000000..7c302d55910e --- /dev/null +++ b/drivers/mtd/nand/nomadik_nand.c @@ -0,0 +1,250 @@ +/* + * drivers/mtd/nand/nomadik_nand.c + * + * Overview: + * Driver for on-board NAND flash on Nomadik Platforms + * + * Copyright © 2007 STMicroelectronics Pvt. Ltd. + * Author: Sachin Verma <sachin.verma@st.com> + * + * Copyright © 2009 Alessandro Rubini + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/types.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/nand.h> +#include <linux/mtd/nand_ecc.h> +#include <linux/platform_device.h> +#include <linux/mtd/partitions.h> +#include <linux/io.h> +#include <mach/nand.h> +#include <mach/fsmc.h> + +#include <mtd/mtd-abi.h> + +struct nomadik_nand_host { + struct mtd_info mtd; + struct nand_chip nand; + void __iomem *data_va; + void __iomem *cmd_va; + void __iomem *addr_va; + struct nand_bbt_descr *bbt_desc; +}; + +static struct nand_ecclayout nomadik_ecc_layout = { + .eccbytes = 3 * 4, + .eccpos = { /* each subpage has 16 bytes: pos 2,3,4 hosts ECC */ + 0x02, 0x03, 0x04, + 0x12, 0x13, 0x14, + 0x22, 0x23, 0x24, + 0x32, 0x33, 0x34}, + /* let's keep bytes 5,6,7 for us, just in case we change ECC algo */ + .oobfree = { {0x08, 0x08}, {0x18, 0x08}, {0x28, 0x08}, {0x38, 0x08} }, +}; + +static void nomadik_ecc_control(struct mtd_info *mtd, int mode) +{ + /* No need to enable hw ecc, it's on by default */ +} + +static void nomadik_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl) +{ + struct nand_chip *nand = mtd->priv; + struct nomadik_nand_host *host = nand->priv; + + if (cmd == NAND_CMD_NONE) + return; + + if (ctrl & NAND_CLE) + writeb(cmd, host->cmd_va); + else + writeb(cmd, host->addr_va); +} + +static int nomadik_nand_probe(struct platform_device *pdev) +{ + struct nomadik_nand_platform_data *pdata = pdev->dev.platform_data; + struct nomadik_nand_host *host; + struct mtd_info *mtd; + struct nand_chip *nand; + struct resource *res; + int ret = 0; + + /* Allocate memory for the device structure (and zero it) */ + host = kzalloc(sizeof(struct nomadik_nand_host), GFP_KERNEL); + if (!host) { + dev_err(&pdev->dev, "Failed to allocate device structure.\n"); + return -ENOMEM; + } + + /* Call the client's init function, if any */ + if (pdata->init) + ret = pdata->init(); + if (ret < 0) { + dev_err(&pdev->dev, "Init function failed\n"); + goto err; + } + + /* ioremap three regions */ + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "nand_addr"); + if (!res) { + ret = -EIO; + goto err_unmap; + } + host->addr_va = ioremap(res->start, res->end - res->start + 1); + + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "nand_data"); + if (!res) { + ret = -EIO; + goto err_unmap; + } + host->data_va = ioremap(res->start, res->end - res->start + 1); + + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "nand_cmd"); + if (!res) { + ret = -EIO; + goto err_unmap; + } + host->cmd_va = ioremap(res->start, res->end - res->start + 1); + + if (!host->addr_va || !host->data_va || !host->cmd_va) { + ret = -ENOMEM; + goto err_unmap; + } + + /* Link all private pointers */ + mtd = &host->mtd; + nand = &host->nand; + mtd->priv = nand; + nand->priv = host; + + host->mtd.owner = THIS_MODULE; + nand->IO_ADDR_R = host->data_va; + nand->IO_ADDR_W = host->data_va; + nand->cmd_ctrl = nomadik_cmd_ctrl; + + /* + * This stanza declares ECC_HW but uses soft routines. It's because + * HW claims to make the calculation but not the correction. However, + * I haven't managed to get the desired data out of it until now. + */ + nand->ecc.mode = NAND_ECC_SOFT; + nand->ecc.layout = &nomadik_ecc_layout; + nand->ecc.hwctl = nomadik_ecc_control; + nand->ecc.size = 512; + nand->ecc.bytes = 3; + + nand->options = pdata->options; + + /* + * Scan to find existance of the device + */ + if (nand_scan(&host->mtd, 1)) { + ret = -ENXIO; + goto err_unmap; + } + +#ifdef CONFIG_MTD_PARTITIONS + add_mtd_partitions(&host->mtd, pdata->parts, pdata->nparts); +#else + pr_info("Registering %s as whole device\n", mtd->name); + add_mtd_device(mtd); +#endif + + platform_set_drvdata(pdev, host); + return 0; + + err_unmap: + if (host->cmd_va) + iounmap(host->cmd_va); + if (host->data_va) + iounmap(host->data_va); + if (host->addr_va) + iounmap(host->addr_va); + err: + kfree(host); + return ret; +} + +/* + * Clean up routine + */ +static int nomadik_nand_remove(struct platform_device *pdev) +{ + struct nomadik_nand_host *host = platform_get_drvdata(pdev); + struct nomadik_nand_platform_data *pdata = pdev->dev.platform_data; + + if (pdata->exit) + pdata->exit(); + + if (host) { + iounmap(host->cmd_va); + iounmap(host->data_va); + iounmap(host->addr_va); + kfree(host); + } + return 0; +} + +static int nomadik_nand_suspend(struct device *dev) +{ + struct nomadik_nand_host *host = dev_get_drvdata(dev); + int ret = 0; + if (host) + ret = host->mtd.suspend(&host->mtd); + return ret; +} + +static int nomadik_nand_resume(struct device *dev) +{ + struct nomadik_nand_host *host = dev_get_drvdata(dev); + if (host) + host->mtd.resume(&host->mtd); + return 0; +} + +static struct dev_pm_ops nomadik_nand_pm_ops = { + .suspend = nomadik_nand_suspend, + .resume = nomadik_nand_resume, +}; + +static struct platform_driver nomadik_nand_driver = { + .probe = nomadik_nand_probe, + .remove = nomadik_nand_remove, + .driver = { + .owner = THIS_MODULE, + .name = "nomadik_nand", + .pm = &nomadik_nand_pm_ops, + }, +}; + +static int __init nand_nomadik_init(void) +{ + pr_info("Nomadik NAND driver\n"); + return platform_driver_register(&nomadik_nand_driver); +} + +static void __exit nand_nomadik_exit(void) +{ + platform_driver_unregister(&nomadik_nand_driver); +} + +module_init(nand_nomadik_init); +module_exit(nand_nomadik_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("ST Microelectronics (sachin.verma@st.com)"); +MODULE_DESCRIPTION("NAND driver for Nomadik Platform"); diff --git a/drivers/mtd/nand/omap2.c b/drivers/mtd/nand/omap2.c index ebd07e95b814..090ab87086b5 100644 --- a/drivers/mtd/nand/omap2.c +++ b/drivers/mtd/nand/omap2.c @@ -18,8 +18,7 @@ #include <linux/mtd/partitions.h> #include <linux/io.h> -#include <asm/dma.h> - +#include <mach/dma.h> #include <mach/gpmc.h> #include <mach/nand.h> @@ -112,6 +111,27 @@ static const char *part_probes[] = { "cmdlinepart", NULL }; #endif +#ifdef CONFIG_MTD_NAND_OMAP_PREFETCH +static int use_prefetch = 1; + +/* "modprobe ... use_prefetch=0" etc */ +module_param(use_prefetch, bool, 0); +MODULE_PARM_DESC(use_prefetch, "enable/disable use of PREFETCH"); + +#ifdef CONFIG_MTD_NAND_OMAP_PREFETCH_DMA +static int use_dma = 1; + +/* "modprobe ... use_dma=0" etc */ +module_param(use_dma, bool, 0); +MODULE_PARM_DESC(use_dma, "enable/disable use of DMA"); +#else +const int use_dma; +#endif +#else +const int use_prefetch; +const int use_dma; +#endif + struct omap_nand_info { struct nand_hw_control controller; struct omap_nand_platform_data *pdata; @@ -124,6 +144,9 @@ struct omap_nand_info { unsigned long phys_base; void __iomem *gpmc_cs_baseaddr; void __iomem *gpmc_baseaddr; + void __iomem *nand_pref_fifo_add; + struct completion comp; + int dma_ch; }; /** @@ -189,6 +212,38 @@ static void omap_hwcontrol(struct mtd_info *mtd, int cmd, unsigned int ctrl) } /** + * omap_read_buf8 - read data from NAND controller into buffer + * @mtd: MTD device structure + * @buf: buffer to store date + * @len: number of bytes to read + */ +static void omap_read_buf8(struct mtd_info *mtd, u_char *buf, int len) +{ + struct nand_chip *nand = mtd->priv; + + ioread8_rep(nand->IO_ADDR_R, buf, len); +} + +/** + * omap_write_buf8 - write buffer to NAND controller + * @mtd: MTD device structure + * @buf: data buffer + * @len: number of bytes to write + */ +static void omap_write_buf8(struct mtd_info *mtd, const u_char *buf, int len) +{ + struct omap_nand_info *info = container_of(mtd, + struct omap_nand_info, mtd); + u_char *p = (u_char *)buf; + + while (len--) { + iowrite8(*p++, info->nand.IO_ADDR_W); + while (GPMC_BUF_EMPTY == (readl(info->gpmc_baseaddr + + GPMC_STATUS) & GPMC_BUF_FULL)); + } +} + +/** * omap_read_buf16 - read data from NAND controller into buffer * @mtd: MTD device structure * @buf: buffer to store date @@ -198,7 +253,7 @@ static void omap_read_buf16(struct mtd_info *mtd, u_char *buf, int len) { struct nand_chip *nand = mtd->priv; - __raw_readsw(nand->IO_ADDR_R, buf, len / 2); + ioread16_rep(nand->IO_ADDR_R, buf, len / 2); } /** @@ -217,13 +272,242 @@ static void omap_write_buf16(struct mtd_info *mtd, const u_char * buf, int len) len >>= 1; while (len--) { - writew(*p++, info->nand.IO_ADDR_W); + iowrite16(*p++, info->nand.IO_ADDR_W); while (GPMC_BUF_EMPTY == (readl(info->gpmc_baseaddr + GPMC_STATUS) & GPMC_BUF_FULL)) ; } } + +/** + * omap_read_buf_pref - read data from NAND controller into buffer + * @mtd: MTD device structure + * @buf: buffer to store date + * @len: number of bytes to read + */ +static void omap_read_buf_pref(struct mtd_info *mtd, u_char *buf, int len) +{ + struct omap_nand_info *info = container_of(mtd, + struct omap_nand_info, mtd); + uint32_t pfpw_status = 0, r_count = 0; + int ret = 0; + u32 *p = (u32 *)buf; + + /* take care of subpage reads */ + for (; len % 4 != 0; ) { + *buf++ = __raw_readb(info->nand.IO_ADDR_R); + len--; + } + p = (u32 *) buf; + + /* configure and start prefetch transfer */ + ret = gpmc_prefetch_enable(info->gpmc_cs, 0x0, len, 0x0); + if (ret) { + /* PFPW engine is busy, use cpu copy method */ + if (info->nand.options & NAND_BUSWIDTH_16) + omap_read_buf16(mtd, buf, len); + else + omap_read_buf8(mtd, buf, len); + } else { + do { + pfpw_status = gpmc_prefetch_status(); + r_count = ((pfpw_status >> 24) & 0x7F) >> 2; + ioread32_rep(info->nand_pref_fifo_add, p, r_count); + p += r_count; + len -= r_count << 2; + } while (len); + + /* disable and stop the PFPW engine */ + gpmc_prefetch_reset(); + } +} + +/** + * omap_write_buf_pref - write buffer to NAND controller + * @mtd: MTD device structure + * @buf: data buffer + * @len: number of bytes to write + */ +static void omap_write_buf_pref(struct mtd_info *mtd, + const u_char *buf, int len) +{ + struct omap_nand_info *info = container_of(mtd, + struct omap_nand_info, mtd); + uint32_t pfpw_status = 0, w_count = 0; + int i = 0, ret = 0; + u16 *p = (u16 *) buf; + + /* take care of subpage writes */ + if (len % 2 != 0) { + writeb(*buf, info->nand.IO_ADDR_R); + p = (u16 *)(buf + 1); + len--; + } + + /* configure and start prefetch transfer */ + ret = gpmc_prefetch_enable(info->gpmc_cs, 0x0, len, 0x1); + if (ret) { + /* PFPW engine is busy, use cpu copy method */ + if (info->nand.options & NAND_BUSWIDTH_16) + omap_write_buf16(mtd, buf, len); + else + omap_write_buf8(mtd, buf, len); + } else { + pfpw_status = gpmc_prefetch_status(); + while (pfpw_status & 0x3FFF) { + w_count = ((pfpw_status >> 24) & 0x7F) >> 1; + for (i = 0; (i < w_count) && len; i++, len -= 2) + iowrite16(*p++, info->nand_pref_fifo_add); + pfpw_status = gpmc_prefetch_status(); + } + + /* disable and stop the PFPW engine */ + gpmc_prefetch_reset(); + } +} + +#ifdef CONFIG_MTD_NAND_OMAP_PREFETCH_DMA +/* + * omap_nand_dma_cb: callback on the completion of dma transfer + * @lch: logical channel + * @ch_satuts: channel status + * @data: pointer to completion data structure + */ +static void omap_nand_dma_cb(int lch, u16 ch_status, void *data) +{ + complete((struct completion *) data); +} + +/* + * omap_nand_dma_transfer: configer and start dma transfer + * @mtd: MTD device structure + * @addr: virtual address in RAM of source/destination + * @len: number of data bytes to be transferred + * @is_write: flag for read/write operation + */ +static inline int omap_nand_dma_transfer(struct mtd_info *mtd, void *addr, + unsigned int len, int is_write) +{ + struct omap_nand_info *info = container_of(mtd, + struct omap_nand_info, mtd); + uint32_t prefetch_status = 0; + enum dma_data_direction dir = is_write ? DMA_TO_DEVICE : + DMA_FROM_DEVICE; + dma_addr_t dma_addr; + int ret; + + /* The fifo depth is 64 bytes. We have a sync at each frame and frame + * length is 64 bytes. + */ + int buf_len = len >> 6; + + if (addr >= high_memory) { + struct page *p1; + + if (((size_t)addr & PAGE_MASK) != + ((size_t)(addr + len - 1) & PAGE_MASK)) + goto out_copy; + p1 = vmalloc_to_page(addr); + if (!p1) + goto out_copy; + addr = page_address(p1) + ((size_t)addr & ~PAGE_MASK); + } + + dma_addr = dma_map_single(&info->pdev->dev, addr, len, dir); + if (dma_mapping_error(&info->pdev->dev, dma_addr)) { + dev_err(&info->pdev->dev, + "Couldn't DMA map a %d byte buffer\n", len); + goto out_copy; + } + + if (is_write) { + omap_set_dma_dest_params(info->dma_ch, 0, OMAP_DMA_AMODE_CONSTANT, + info->phys_base, 0, 0); + omap_set_dma_src_params(info->dma_ch, 0, OMAP_DMA_AMODE_POST_INC, + dma_addr, 0, 0); + omap_set_dma_transfer_params(info->dma_ch, OMAP_DMA_DATA_TYPE_S32, + 0x10, buf_len, OMAP_DMA_SYNC_FRAME, + OMAP24XX_DMA_GPMC, OMAP_DMA_DST_SYNC); + } else { + omap_set_dma_src_params(info->dma_ch, 0, OMAP_DMA_AMODE_CONSTANT, + info->phys_base, 0, 0); + omap_set_dma_dest_params(info->dma_ch, 0, OMAP_DMA_AMODE_POST_INC, + dma_addr, 0, 0); + omap_set_dma_transfer_params(info->dma_ch, OMAP_DMA_DATA_TYPE_S32, + 0x10, buf_len, OMAP_DMA_SYNC_FRAME, + OMAP24XX_DMA_GPMC, OMAP_DMA_SRC_SYNC); + } + /* configure and start prefetch transfer */ + ret = gpmc_prefetch_enable(info->gpmc_cs, 0x1, len, is_write); + if (ret) + /* PFPW engine is busy, use cpu copy methode */ + goto out_copy; + + init_completion(&info->comp); + + omap_start_dma(info->dma_ch); + + /* setup and start DMA using dma_addr */ + wait_for_completion(&info->comp); + + while (0x3fff & (prefetch_status = gpmc_prefetch_status())) + ; + /* disable and stop the PFPW engine */ + gpmc_prefetch_reset(); + + dma_unmap_single(&info->pdev->dev, dma_addr, len, dir); + return 0; + +out_copy: + if (info->nand.options & NAND_BUSWIDTH_16) + is_write == 0 ? omap_read_buf16(mtd, (u_char *) addr, len) + : omap_write_buf16(mtd, (u_char *) addr, len); + else + is_write == 0 ? omap_read_buf8(mtd, (u_char *) addr, len) + : omap_write_buf8(mtd, (u_char *) addr, len); + return 0; +} +#else +static void omap_nand_dma_cb(int lch, u16 ch_status, void *data) {} +static inline int omap_nand_dma_transfer(struct mtd_info *mtd, void *addr, + unsigned int len, int is_write) +{ + return 0; +} +#endif + +/** + * omap_read_buf_dma_pref - read data from NAND controller into buffer + * @mtd: MTD device structure + * @buf: buffer to store date + * @len: number of bytes to read + */ +static void omap_read_buf_dma_pref(struct mtd_info *mtd, u_char *buf, int len) +{ + if (len <= mtd->oobsize) + omap_read_buf_pref(mtd, buf, len); + else + /* start transfer in DMA mode */ + omap_nand_dma_transfer(mtd, buf, len, 0x0); +} + +/** + * omap_write_buf_dma_pref - write buffer to NAND controller + * @mtd: MTD device structure + * @buf: data buffer + * @len: number of bytes to write + */ +static void omap_write_buf_dma_pref(struct mtd_info *mtd, + const u_char *buf, int len) +{ + if (len <= mtd->oobsize) + omap_write_buf_pref(mtd, buf, len); + else + /* start transfer in DMA mode */ + omap_nand_dma_transfer(mtd, buf, len, 0x1); +} + /** * omap_verify_buf - Verify chip data against buffer * @mtd: MTD device structure @@ -658,17 +942,12 @@ static int __devinit omap_nand_probe(struct platform_device *pdev) err = -ENOMEM; goto out_release_mem_region; } + info->nand.controller = &info->controller; info->nand.IO_ADDR_W = info->nand.IO_ADDR_R; info->nand.cmd_ctrl = omap_hwcontrol; - /* REVISIT: only supports 16-bit NAND flash */ - - info->nand.read_buf = omap_read_buf16; - info->nand.write_buf = omap_write_buf16; - info->nand.verify_buf = omap_verify_buf; - /* * If RDY/BSY line is connected to OMAP then use the omap ready * funcrtion and the generic nand_wait function which reads the status @@ -689,6 +968,40 @@ static int __devinit omap_nand_probe(struct platform_device *pdev) == 0x1000) info->nand.options |= NAND_BUSWIDTH_16; + if (use_prefetch) { + /* copy the virtual address of nand base for fifo access */ + info->nand_pref_fifo_add = info->nand.IO_ADDR_R; + + info->nand.read_buf = omap_read_buf_pref; + info->nand.write_buf = omap_write_buf_pref; + if (use_dma) { + err = omap_request_dma(OMAP24XX_DMA_GPMC, "NAND", + omap_nand_dma_cb, &info->comp, &info->dma_ch); + if (err < 0) { + info->dma_ch = -1; + printk(KERN_WARNING "DMA request failed." + " Non-dma data transfer mode\n"); + } else { + omap_set_dma_dest_burst_mode(info->dma_ch, + OMAP_DMA_DATA_BURST_16); + omap_set_dma_src_burst_mode(info->dma_ch, + OMAP_DMA_DATA_BURST_16); + + info->nand.read_buf = omap_read_buf_dma_pref; + info->nand.write_buf = omap_write_buf_dma_pref; + } + } + } else { + if (info->nand.options & NAND_BUSWIDTH_16) { + info->nand.read_buf = omap_read_buf16; + info->nand.write_buf = omap_write_buf16; + } else { + info->nand.read_buf = omap_read_buf8; + info->nand.write_buf = omap_write_buf8; + } + } + info->nand.verify_buf = omap_verify_buf; + #ifdef CONFIG_MTD_NAND_OMAP_HWECC info->nand.ecc.bytes = 3; info->nand.ecc.size = 512; @@ -744,9 +1057,12 @@ static int omap_nand_remove(struct platform_device *pdev) struct omap_nand_info *info = mtd->priv; platform_set_drvdata(pdev, NULL); + if (use_dma) + omap_free_dma(info->dma_ch); + /* Release NAND device, its internal structures and partitions */ nand_release(&info->mtd); - iounmap(info->nand.IO_ADDR_R); + iounmap(info->nand_pref_fifo_add); kfree(&info->mtd); return 0; } @@ -763,6 +1079,15 @@ static struct platform_driver omap_nand_driver = { static int __init omap_nand_init(void) { printk(KERN_INFO "%s driver initializing\n", DRIVER_NAME); + + /* This check is required if driver is being + * loaded run time as a module + */ + if ((1 == use_dma) && (0 == use_prefetch)) { + printk(KERN_INFO"Wrong parameters: 'use_dma' can not be 1 " + "without use_prefetch'. Prefetch will not be" + " used in either mode (mpu or dma)\n"); + } return platform_driver_register(&omap_nand_driver); } diff --git a/drivers/mtd/nand/orion_nand.c b/drivers/mtd/nand/orion_nand.c index 0d9d4bc9c762..f59c07427af3 100644 --- a/drivers/mtd/nand/orion_nand.c +++ b/drivers/mtd/nand/orion_nand.c @@ -171,7 +171,6 @@ static int __devexit orion_nand_remove(struct platform_device *pdev) } static struct platform_driver orion_nand_driver = { - .probe = orion_nand_probe, .remove = __devexit_p(orion_nand_remove), .driver = { .name = "orion_nand", @@ -181,7 +180,7 @@ static struct platform_driver orion_nand_driver = { static int __init orion_nand_init(void) { - return platform_driver_register(&orion_nand_driver); + return platform_driver_probe(&orion_nand_driver, orion_nand_probe); } static void __exit orion_nand_exit(void) diff --git a/drivers/mtd/nand/pxa3xx_nand.c b/drivers/mtd/nand/pxa3xx_nand.c index 30a8ce6d3e69..6ea520ae2410 100644 --- a/drivers/mtd/nand/pxa3xx_nand.c +++ b/drivers/mtd/nand/pxa3xx_nand.c @@ -102,6 +102,7 @@ enum { ERR_SENDCMD = -2, ERR_DBERR = -3, ERR_BBERR = -4, + ERR_SBERR = -5, }; enum { @@ -564,11 +565,13 @@ static irqreturn_t pxa3xx_nand_irq(int irq, void *devid) status = nand_readl(info, NDSR); - if (status & (NDSR_RDDREQ | NDSR_DBERR)) { + if (status & (NDSR_RDDREQ | NDSR_DBERR | NDSR_SBERR)) { if (status & NDSR_DBERR) info->retcode = ERR_DBERR; + else if (status & NDSR_SBERR) + info->retcode = ERR_SBERR; - disable_int(info, NDSR_RDDREQ | NDSR_DBERR); + disable_int(info, NDSR_RDDREQ | NDSR_DBERR | NDSR_SBERR); if (info->use_dma) { info->state = STATE_DMA_READING; @@ -670,7 +673,7 @@ static void pxa3xx_nand_cmdfunc(struct mtd_info *mtd, unsigned command, if (prepare_read_prog_cmd(info, cmdset->read1, column, page_addr)) break; - pxa3xx_nand_do_cmd(info, NDSR_RDDREQ | NDSR_DBERR); + pxa3xx_nand_do_cmd(info, NDSR_RDDREQ | NDSR_DBERR | NDSR_SBERR); /* We only are OOB, so if the data has error, does not matter */ if (info->retcode == ERR_DBERR) @@ -687,7 +690,7 @@ static void pxa3xx_nand_cmdfunc(struct mtd_info *mtd, unsigned command, if (prepare_read_prog_cmd(info, cmdset->read1, column, page_addr)) break; - pxa3xx_nand_do_cmd(info, NDSR_RDDREQ | NDSR_DBERR); + pxa3xx_nand_do_cmd(info, NDSR_RDDREQ | NDSR_DBERR | NDSR_SBERR); if (info->retcode == ERR_DBERR) { /* for blank page (all 0xff), HW will calculate its ECC as @@ -861,8 +864,12 @@ static int pxa3xx_nand_ecc_correct(struct mtd_info *mtd, * consider it as a ecc error which will tell the caller the * read fail We have distinguish all the errors, but the * nand_read_ecc only check this function return value + * + * Corrected (single-bit) errors must also be noted. */ - if (info->retcode != ERR_NONE) + if (info->retcode == ERR_SBERR) + return 1; + else if (info->retcode != ERR_NONE) return -1; return 0; diff --git a/drivers/mtd/nand/sh_flctl.c b/drivers/mtd/nand/sh_flctl.c index 2bc896623e2d..02bef21f2e4b 100644 --- a/drivers/mtd/nand/sh_flctl.c +++ b/drivers/mtd/nand/sh_flctl.c @@ -329,7 +329,7 @@ static void set_cmd_regs(struct mtd_info *mtd, uint32_t cmd, uint32_t flcmcdr_va } static int flctl_read_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip, - uint8_t *buf) + uint8_t *buf, int page) { int i, eccsize = chip->ecc.size; int eccbytes = chip->ecc.bytes; @@ -857,7 +857,6 @@ static int __exit flctl_remove(struct platform_device *pdev) } static struct platform_driver flctl_driver = { - .probe = flctl_probe, .remove = flctl_remove, .driver = { .name = "sh_flctl", @@ -867,7 +866,7 @@ static struct platform_driver flctl_driver = { static int __init flctl_nand_init(void) { - return platform_driver_register(&flctl_driver); + return platform_driver_probe(&flctl_driver, flctl_probe); } static void __exit flctl_nand_cleanup(void) diff --git a/drivers/mtd/nand/tmio_nand.c b/drivers/mtd/nand/tmio_nand.c index daa6a4c3b8ce..92c73344a669 100644 --- a/drivers/mtd/nand/tmio_nand.c +++ b/drivers/mtd/nand/tmio_nand.c @@ -301,6 +301,21 @@ static int tmio_nand_calculate_ecc(struct mtd_info *mtd, const u_char *dat, return 0; } +static int tmio_nand_correct_data(struct mtd_info *mtd, unsigned char *buf, + unsigned char *read_ecc, unsigned char *calc_ecc) +{ + int r0, r1; + + /* assume ecc.size = 512 and ecc.bytes = 6 */ + r0 = __nand_correct_data(buf, read_ecc, calc_ecc, 256); + if (r0 < 0) + return r0; + r1 = __nand_correct_data(buf + 256, read_ecc + 3, calc_ecc + 3, 256); + if (r1 < 0) + return r1; + return r0 + r1; +} + static int tmio_hw_init(struct platform_device *dev, struct tmio_nand *tmio) { struct mfd_cell *cell = (struct mfd_cell *)dev->dev.platform_data; @@ -424,7 +439,7 @@ static int tmio_probe(struct platform_device *dev) nand_chip->ecc.bytes = 6; nand_chip->ecc.hwctl = tmio_nand_enable_hwecc; nand_chip->ecc.calculate = tmio_nand_calculate_ecc; - nand_chip->ecc.correct = nand_correct_data; + nand_chip->ecc.correct = tmio_nand_correct_data; if (data) nand_chip->badblock_pattern = data->badblock_pattern; diff --git a/drivers/mtd/nand/txx9ndfmc.c b/drivers/mtd/nand/txx9ndfmc.c index 488088eff2ca..73af8324d0d0 100644 --- a/drivers/mtd/nand/txx9ndfmc.c +++ b/drivers/mtd/nand/txx9ndfmc.c @@ -189,18 +189,43 @@ static int txx9ndfmc_calculate_ecc(struct mtd_info *mtd, const uint8_t *dat, uint8_t *ecc_code) { struct platform_device *dev = mtd_to_platdev(mtd); + struct nand_chip *chip = mtd->priv; + int eccbytes; u32 mcr = txx9ndfmc_read(dev, TXX9_NDFMCR); mcr &= ~TXX9_NDFMCR_ECC_ALL; txx9ndfmc_write(dev, mcr | TXX9_NDFMCR_ECC_OFF, TXX9_NDFMCR); txx9ndfmc_write(dev, mcr | TXX9_NDFMCR_ECC_READ, TXX9_NDFMCR); - ecc_code[1] = txx9ndfmc_read(dev, TXX9_NDFDTR); - ecc_code[0] = txx9ndfmc_read(dev, TXX9_NDFDTR); - ecc_code[2] = txx9ndfmc_read(dev, TXX9_NDFDTR); + for (eccbytes = chip->ecc.bytes; eccbytes > 0; eccbytes -= 3) { + ecc_code[1] = txx9ndfmc_read(dev, TXX9_NDFDTR); + ecc_code[0] = txx9ndfmc_read(dev, TXX9_NDFDTR); + ecc_code[2] = txx9ndfmc_read(dev, TXX9_NDFDTR); + ecc_code += 3; + } txx9ndfmc_write(dev, mcr | TXX9_NDFMCR_ECC_OFF, TXX9_NDFMCR); return 0; } +static int txx9ndfmc_correct_data(struct mtd_info *mtd, unsigned char *buf, + unsigned char *read_ecc, unsigned char *calc_ecc) +{ + struct nand_chip *chip = mtd->priv; + int eccsize; + int corrected = 0; + int stat; + + for (eccsize = chip->ecc.size; eccsize > 0; eccsize -= 256) { + stat = __nand_correct_data(buf, read_ecc, calc_ecc, 256); + if (stat < 0) + return stat; + corrected += stat; + buf += 256; + read_ecc += 3; + calc_ecc += 3; + } + return corrected; +} + static void txx9ndfmc_enable_hwecc(struct mtd_info *mtd, int mode) { struct platform_device *dev = mtd_to_platdev(mtd); @@ -244,6 +269,22 @@ static void txx9ndfmc_initialize(struct platform_device *dev) #define TXX9NDFMC_NS_TO_CYC(gbusclk, ns) \ DIV_ROUND_UP((ns) * DIV_ROUND_UP(gbusclk, 1000), 1000000) +static int txx9ndfmc_nand_scan(struct mtd_info *mtd) +{ + struct nand_chip *chip = mtd->priv; + int ret; + + ret = nand_scan_ident(mtd, 1); + if (!ret) { + if (mtd->writesize >= 512) { + chip->ecc.size = mtd->writesize; + chip->ecc.bytes = 3 * (mtd->writesize / 256); + } + ret = nand_scan_tail(mtd); + } + return ret; +} + static int __init txx9ndfmc_probe(struct platform_device *dev) { struct txx9ndfmc_platform_data *plat = dev->dev.platform_data; @@ -321,9 +362,10 @@ static int __init txx9ndfmc_probe(struct platform_device *dev) chip->cmd_ctrl = txx9ndfmc_cmd_ctrl; chip->dev_ready = txx9ndfmc_dev_ready; chip->ecc.calculate = txx9ndfmc_calculate_ecc; - chip->ecc.correct = nand_correct_data; + chip->ecc.correct = txx9ndfmc_correct_data; chip->ecc.hwctl = txx9ndfmc_enable_hwecc; chip->ecc.mode = NAND_ECC_HW; + /* txx9ndfmc_nand_scan will overwrite ecc.size and ecc.bytes */ chip->ecc.size = 256; chip->ecc.bytes = 3; chip->chip_delay = 100; @@ -349,7 +391,7 @@ static int __init txx9ndfmc_probe(struct platform_device *dev) if (plat->wide_mask & (1 << i)) chip->options |= NAND_BUSWIDTH_16; - if (nand_scan(mtd, 1)) { + if (txx9ndfmc_nand_scan(mtd)) { kfree(txx9_priv->mtdname); kfree(txx9_priv); continue; diff --git a/drivers/mtd/nand/w90p910_nand.c b/drivers/mtd/nand/w90p910_nand.c new file mode 100644 index 000000000000..7680e731348a --- /dev/null +++ b/drivers/mtd/nand/w90p910_nand.c @@ -0,0 +1,382 @@ +/* + * Copyright (c) 2009 Nuvoton technology corporation. + * + * Wan ZongShun <mcuos.com@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation;version 2 of the License. + * + */ + +#include <linux/slab.h> +#include <linux/init.h> +#include <linux/module.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/platform_device.h> +#include <linux/delay.h> +#include <linux/clk.h> +#include <linux/err.h> + +#include <linux/mtd/mtd.h> +#include <linux/mtd/nand.h> +#include <linux/mtd/partitions.h> + +#define REG_FMICSR 0x00 +#define REG_SMCSR 0xa0 +#define REG_SMISR 0xac +#define REG_SMCMD 0xb0 +#define REG_SMADDR 0xb4 +#define REG_SMDATA 0xb8 + +#define RESET_FMI 0x01 +#define NAND_EN 0x08 +#define READYBUSY (0x01 << 18) + +#define SWRST 0x01 +#define PSIZE (0x01 << 3) +#define DMARWEN (0x03 << 1) +#define BUSWID (0x01 << 4) +#define ECC4EN (0x01 << 5) +#define WP (0x01 << 24) +#define NANDCS (0x01 << 25) +#define ENDADDR (0x01 << 31) + +#define read_data_reg(dev) \ + __raw_readl((dev)->reg + REG_SMDATA) + +#define write_data_reg(dev, val) \ + __raw_writel((val), (dev)->reg + REG_SMDATA) + +#define write_cmd_reg(dev, val) \ + __raw_writel((val), (dev)->reg + REG_SMCMD) + +#define write_addr_reg(dev, val) \ + __raw_writel((val), (dev)->reg + REG_SMADDR) + +struct w90p910_nand { + struct mtd_info mtd; + struct nand_chip chip; + void __iomem *reg; + struct clk *clk; + spinlock_t lock; +}; + +static const struct mtd_partition partitions[] = { + { + .name = "NAND FS 0", + .offset = 0, + .size = 8 * 1024 * 1024 + }, + { + .name = "NAND FS 1", + .offset = MTDPART_OFS_APPEND, + .size = MTDPART_SIZ_FULL + } +}; + +static unsigned char w90p910_nand_read_byte(struct mtd_info *mtd) +{ + unsigned char ret; + struct w90p910_nand *nand; + + nand = container_of(mtd, struct w90p910_nand, mtd); + + ret = (unsigned char)read_data_reg(nand); + + return ret; +} + +static void w90p910_nand_read_buf(struct mtd_info *mtd, + unsigned char *buf, int len) +{ + int i; + struct w90p910_nand *nand; + + nand = container_of(mtd, struct w90p910_nand, mtd); + + for (i = 0; i < len; i++) + buf[i] = (unsigned char)read_data_reg(nand); +} + +static void w90p910_nand_write_buf(struct mtd_info *mtd, + const unsigned char *buf, int len) +{ + int i; + struct w90p910_nand *nand; + + nand = container_of(mtd, struct w90p910_nand, mtd); + + for (i = 0; i < len; i++) + write_data_reg(nand, buf[i]); +} + +static int w90p910_verify_buf(struct mtd_info *mtd, + const unsigned char *buf, int len) +{ + int i; + struct w90p910_nand *nand; + + nand = container_of(mtd, struct w90p910_nand, mtd); + + for (i = 0; i < len; i++) { + if (buf[i] != (unsigned char)read_data_reg(nand)) + return -EFAULT; + } + + return 0; +} + +static int w90p910_check_rb(struct w90p910_nand *nand) +{ + unsigned int val; + spin_lock(&nand->lock); + val = __raw_readl(REG_SMISR); + val &= READYBUSY; + spin_unlock(&nand->lock); + + return val; +} + +static int w90p910_nand_devready(struct mtd_info *mtd) +{ + struct w90p910_nand *nand; + int ready; + + nand = container_of(mtd, struct w90p910_nand, mtd); + + ready = (w90p910_check_rb(nand)) ? 1 : 0; + return ready; +} + +static void w90p910_nand_command_lp(struct mtd_info *mtd, + unsigned int command, int column, int page_addr) +{ + register struct nand_chip *chip = mtd->priv; + struct w90p910_nand *nand; + + nand = container_of(mtd, struct w90p910_nand, mtd); + + if (command == NAND_CMD_READOOB) { + column += mtd->writesize; + command = NAND_CMD_READ0; + } + + write_cmd_reg(nand, command & 0xff); + + if (column != -1 || page_addr != -1) { + + if (column != -1) { + if (chip->options & NAND_BUSWIDTH_16) + column >>= 1; + write_addr_reg(nand, column); + write_addr_reg(nand, column >> 8 | ENDADDR); + } + if (page_addr != -1) { + write_addr_reg(nand, page_addr); + + if (chip->chipsize > (128 << 20)) { + write_addr_reg(nand, page_addr >> 8); + write_addr_reg(nand, page_addr >> 16 | ENDADDR); + } else { + write_addr_reg(nand, page_addr >> 8 | ENDADDR); + } + } + } + + switch (command) { + case NAND_CMD_CACHEDPROG: + case NAND_CMD_PAGEPROG: + case NAND_CMD_ERASE1: + case NAND_CMD_ERASE2: + case NAND_CMD_SEQIN: + case NAND_CMD_RNDIN: + case NAND_CMD_STATUS: + case NAND_CMD_DEPLETE1: + return; + + case NAND_CMD_STATUS_ERROR: + case NAND_CMD_STATUS_ERROR0: + case NAND_CMD_STATUS_ERROR1: + case NAND_CMD_STATUS_ERROR2: + case NAND_CMD_STATUS_ERROR3: + udelay(chip->chip_delay); + return; + + case NAND_CMD_RESET: + if (chip->dev_ready) + break; + udelay(chip->chip_delay); + + write_cmd_reg(nand, NAND_CMD_STATUS); + write_cmd_reg(nand, command); + + while (!w90p910_check_rb(nand)) + ; + + return; + + case NAND_CMD_RNDOUT: + write_cmd_reg(nand, NAND_CMD_RNDOUTSTART); + return; + + case NAND_CMD_READ0: + + write_cmd_reg(nand, NAND_CMD_READSTART); + default: + + if (!chip->dev_ready) { + udelay(chip->chip_delay); + return; + } + } + + /* Apply this short delay always to ensure that we do wait tWB in + * any case on any machine. */ + ndelay(100); + + while (!chip->dev_ready(mtd)) + ; +} + + +static void w90p910_nand_enable(struct w90p910_nand *nand) +{ + unsigned int val; + spin_lock(&nand->lock); + __raw_writel(RESET_FMI, (nand->reg + REG_FMICSR)); + + val = __raw_readl(nand->reg + REG_FMICSR); + + if (!(val & NAND_EN)) + __raw_writel(val | NAND_EN, REG_FMICSR); + + val = __raw_readl(nand->reg + REG_SMCSR); + + val &= ~(SWRST|PSIZE|DMARWEN|BUSWID|ECC4EN|NANDCS); + val |= WP; + + __raw_writel(val, nand->reg + REG_SMCSR); + + spin_unlock(&nand->lock); +} + +static int __devinit w90p910_nand_probe(struct platform_device *pdev) +{ + struct w90p910_nand *w90p910_nand; + struct nand_chip *chip; + int retval; + struct resource *res; + + retval = 0; + + w90p910_nand = kzalloc(sizeof(struct w90p910_nand), GFP_KERNEL); + if (!w90p910_nand) + return -ENOMEM; + chip = &(w90p910_nand->chip); + + w90p910_nand->mtd.priv = chip; + w90p910_nand->mtd.owner = THIS_MODULE; + spin_lock_init(&w90p910_nand->lock); + + w90p910_nand->clk = clk_get(&pdev->dev, NULL); + if (IS_ERR(w90p910_nand->clk)) { + retval = -ENOENT; + goto fail1; + } + clk_enable(w90p910_nand->clk); + + chip->cmdfunc = w90p910_nand_command_lp; + chip->dev_ready = w90p910_nand_devready; + chip->read_byte = w90p910_nand_read_byte; + chip->write_buf = w90p910_nand_write_buf; + chip->read_buf = w90p910_nand_read_buf; + chip->verify_buf = w90p910_verify_buf; + chip->chip_delay = 50; + chip->options = 0; + chip->ecc.mode = NAND_ECC_SOFT; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + retval = -ENXIO; + goto fail1; + } + + if (!request_mem_region(res->start, resource_size(res), pdev->name)) { + retval = -EBUSY; + goto fail1; + } + + w90p910_nand->reg = ioremap(res->start, resource_size(res)); + if (!w90p910_nand->reg) { + retval = -ENOMEM; + goto fail2; + } + + w90p910_nand_enable(w90p910_nand); + + if (nand_scan(&(w90p910_nand->mtd), 1)) { + retval = -ENXIO; + goto fail3; + } + + add_mtd_partitions(&(w90p910_nand->mtd), partitions, + ARRAY_SIZE(partitions)); + + platform_set_drvdata(pdev, w90p910_nand); + + return retval; + +fail3: iounmap(w90p910_nand->reg); +fail2: release_mem_region(res->start, resource_size(res)); +fail1: kfree(w90p910_nand); + return retval; +} + +static int __devexit w90p910_nand_remove(struct platform_device *pdev) +{ + struct w90p910_nand *w90p910_nand = platform_get_drvdata(pdev); + struct resource *res; + + iounmap(w90p910_nand->reg); + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + release_mem_region(res->start, resource_size(res)); + + clk_disable(w90p910_nand->clk); + clk_put(w90p910_nand->clk); + + kfree(w90p910_nand); + + platform_set_drvdata(pdev, NULL); + + return 0; +} + +static struct platform_driver w90p910_nand_driver = { + .probe = w90p910_nand_probe, + .remove = __devexit_p(w90p910_nand_remove), + .driver = { + .name = "w90p910-fmi", + .owner = THIS_MODULE, + }, +}; + +static int __init w90p910_nand_init(void) +{ + return platform_driver_register(&w90p910_nand_driver); +} + +static void __exit w90p910_nand_exit(void) +{ + platform_driver_unregister(&w90p910_nand_driver); +} + +module_init(w90p910_nand_init); +module_exit(w90p910_nand_exit); + +MODULE_AUTHOR("Wan ZongShun <mcuos.com@gmail.com>"); +MODULE_DESCRIPTION("w90p910 nand driver!"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:w90p910-fmi"); diff --git a/drivers/mtd/ofpart.c b/drivers/mtd/ofpart.c index 3e164f0c9295..62d6a78c4eee 100644 --- a/drivers/mtd/ofpart.c +++ b/drivers/mtd/ofpart.c @@ -46,21 +46,12 @@ int __devinit of_mtd_parse_partitions(struct device *dev, const u32 *reg; int len; - /* check if this is a partition node */ - partname = of_get_property(pp, "name", &len); - if (strcmp(partname, "partition") != 0) { + reg = of_get_property(pp, "reg", &len); + if (!reg) { nr_parts--; continue; } - reg = of_get_property(pp, "reg", &len); - if (!reg || (len != 2 * sizeof(u32))) { - of_node_put(pp); - dev_err(dev, "Invalid 'reg' on %s\n", node->full_name); - kfree(*pparts); - *pparts = NULL; - return -EINVAL; - } (*pparts)[i].offset = reg[0]; (*pparts)[i].size = reg[1]; @@ -75,6 +66,14 @@ int __devinit of_mtd_parse_partitions(struct device *dev, i++; } + if (!i) { + of_node_put(pp); + dev_err(dev, "No valid partition found on %s\n", node->full_name); + kfree(*pparts); + *pparts = NULL; + return -EINVAL; + } + return nr_parts; } EXPORT_SYMBOL(of_mtd_parse_partitions); diff --git a/drivers/mtd/onenand/Kconfig b/drivers/mtd/onenand/Kconfig index 79fa79e8f8de..a38f580c2bb3 100644 --- a/drivers/mtd/onenand/Kconfig +++ b/drivers/mtd/onenand/Kconfig @@ -5,6 +5,7 @@ menuconfig MTD_ONENAND tristate "OneNAND Device Support" depends on MTD + select MTD_PARTITIONS help This enables support for accessing all type of OneNAND flash devices. For further information see @@ -23,7 +24,6 @@ config MTD_ONENAND_VERIFY_WRITE config MTD_ONENAND_GENERIC tristate "OneNAND Flash device via platform device driver" - depends on ARM help Support for OneNAND flash via platform device driver. @@ -66,7 +66,6 @@ config MTD_ONENAND_2X_PROGRAM config MTD_ONENAND_SIM tristate "OneNAND simulator support" - depends on MTD_PARTITIONS help The simulator may simulate various OneNAND flash chips for the OneNAND MTD layer. diff --git a/drivers/mtd/onenand/generic.c b/drivers/mtd/onenand/generic.c index 3a496c33fb52..e78914938c5c 100644 --- a/drivers/mtd/onenand/generic.c +++ b/drivers/mtd/onenand/generic.c @@ -19,12 +19,16 @@ #include <linux/mtd/mtd.h> #include <linux/mtd/onenand.h> #include <linux/mtd/partitions.h> - #include <asm/io.h> -#include <asm/mach/flash.h> - -#define DRIVER_NAME "onenand" +/* + * Note: Driver name and platform data format have been updated! + * + * This version of the driver is named "onenand-flash" and takes struct + * onenand_platform_data as platform data. The old ARM-specific version + * with the name "onenand" used to take struct flash_platform_data. + */ +#define DRIVER_NAME "onenand-flash" #ifdef CONFIG_MTD_PARTITIONS static const char *part_probes[] = { "cmdlinepart", NULL, }; @@ -39,16 +43,16 @@ struct onenand_info { static int __devinit generic_onenand_probe(struct platform_device *pdev) { struct onenand_info *info; - struct flash_platform_data *pdata = pdev->dev.platform_data; + struct onenand_platform_data *pdata = pdev->dev.platform_data; struct resource *res = pdev->resource; - unsigned long size = res->end - res->start + 1; + unsigned long size = resource_size(res); int err; info = kzalloc(sizeof(struct onenand_info), GFP_KERNEL); if (!info) return -ENOMEM; - if (!request_mem_region(res->start, size, pdev->dev.driver->name)) { + if (!request_mem_region(res->start, size, dev_name(&pdev->dev))) { err = -EBUSY; goto out_free_info; } @@ -59,7 +63,7 @@ static int __devinit generic_onenand_probe(struct platform_device *pdev) goto out_release_mem_region; } - info->onenand.mmcontrol = pdata->mmcontrol; + info->onenand.mmcontrol = pdata ? pdata->mmcontrol : 0; info->onenand.irq = platform_get_irq(pdev, 0); info->mtd.name = dev_name(&pdev->dev); @@ -75,7 +79,7 @@ static int __devinit generic_onenand_probe(struct platform_device *pdev) err = parse_mtd_partitions(&info->mtd, part_probes, &info->parts, 0); if (err > 0) add_mtd_partitions(&info->mtd, info->parts, err); - else if (err <= 0 && pdata->parts) + else if (err <= 0 && pdata && pdata->parts) add_mtd_partitions(&info->mtd, pdata->parts, pdata->nr_parts); else #endif @@ -99,7 +103,7 @@ static int __devexit generic_onenand_remove(struct platform_device *pdev) { struct onenand_info *info = platform_get_drvdata(pdev); struct resource *res = pdev->resource; - unsigned long size = res->end - res->start + 1; + unsigned long size = resource_size(res); platform_set_drvdata(pdev, NULL); diff --git a/drivers/mtd/onenand/onenand_base.c b/drivers/mtd/onenand/onenand_base.c index 6e829095ea9d..ff66e4330aa7 100644 --- a/drivers/mtd/onenand/onenand_base.c +++ b/drivers/mtd/onenand/onenand_base.c @@ -1191,7 +1191,7 @@ static int onenand_read_ops_nolock(struct mtd_info *mtd, loff_t from, /* * Chip boundary handling in DDP * Now we issued chip 1 read and pointed chip 1 - * bufferam so we have to point chip 0 bufferam. + * bufferram so we have to point chip 0 bufferram. */ if (ONENAND_IS_DDP(this) && unlikely(from == (this->chipsize >> 1))) { @@ -1867,8 +1867,8 @@ static int onenand_write_ops_nolock(struct mtd_info *mtd, loff_t to, ONENAND_SET_NEXT_BUFFERRAM(this); /* - * 2 PLANE, MLC, and Flex-OneNAND doesn't support - * write-while-programe feature. + * 2 PLANE, MLC, and Flex-OneNAND do not support + * write-while-program feature. */ if (!ONENAND_IS_2PLANE(this) && !first) { ONENAND_SET_PREV_BUFFERRAM(this); @@ -1879,7 +1879,7 @@ static int onenand_write_ops_nolock(struct mtd_info *mtd, loff_t to, onenand_update_bufferram(mtd, prev, !ret && !prev_subpage); if (ret) { written -= prevlen; - printk(KERN_ERR "onenand_write_ops_nolock: write filaed %d\n", ret); + printk(KERN_ERR "onenand_write_ops_nolock: write failed %d\n", ret); break; } @@ -1905,7 +1905,7 @@ static int onenand_write_ops_nolock(struct mtd_info *mtd, loff_t to, /* In partial page write we don't update bufferram */ onenand_update_bufferram(mtd, to, !ret && !subpage); if (ret) { - printk(KERN_ERR "onenand_write_ops_nolock: write filaed %d\n", ret); + printk(KERN_ERR "onenand_write_ops_nolock: write failed %d\n", ret); break; } @@ -2201,7 +2201,7 @@ static int onenand_erase(struct mtd_info *mtd, struct erase_info *instr) /* Grab the lock and see if the device is available */ onenand_get_device(mtd, FL_ERASING); - /* Loop throught the pages */ + /* Loop through the blocks */ instr->state = MTD_ERASING; while (len) { @@ -2328,7 +2328,7 @@ static int onenand_default_block_markbad(struct mtd_info *mtd, loff_t ofs) if (bbm->bbt) bbm->bbt[block >> 2] |= 0x01 << ((block & 0x03) << 1); - /* We write two bytes, so we dont have to mess with 16 bit access */ + /* We write two bytes, so we don't have to mess with 16-bit access */ ofs += mtd->oobsize + (bbm->badblockpos & ~0x01); /* FIXME : What to do when marking SLC block in partition * with MLC erasesize? For now, it is not advisable to @@ -2557,7 +2557,7 @@ static void onenand_unlock_all(struct mtd_info *mtd) #ifdef CONFIG_MTD_ONENAND_OTP -/* Interal OTP operation */ +/* Internal OTP operation */ typedef int (*otp_op_t)(struct mtd_info *mtd, loff_t form, size_t len, size_t *retlen, u_char *buf); @@ -2921,7 +2921,7 @@ static void onenand_check_features(struct mtd_info *mtd) this->options |= ONENAND_HAS_2PLANE; case ONENAND_DEVICE_DENSITY_2Gb: - /* 2Gb DDP don't have 2 plane */ + /* 2Gb DDP does not have 2 plane */ if (!ONENAND_IS_DDP(this)) this->options |= ONENAND_HAS_2PLANE; this->options |= ONENAND_HAS_UNLOCK_ALL; @@ -3364,7 +3364,7 @@ static int onenand_probe(struct mtd_info *mtd) /* It's real page size */ this->writesize = mtd->writesize; - /* REVIST: Multichip handling */ + /* REVISIT: Multichip handling */ if (FLEXONENAND(this)) flexonenand_get_size(mtd); diff --git a/drivers/mtd/tests/mtd_oobtest.c b/drivers/mtd/tests/mtd_oobtest.c index a18e8d2f2557..5553cd4eab20 100644 --- a/drivers/mtd/tests/mtd_oobtest.c +++ b/drivers/mtd/tests/mtd_oobtest.c @@ -512,7 +512,7 @@ static int __init mtd_oobtest_init(void) goto out; addr0 = 0; - for (i = 0; bbt[i] && i < ebcnt; ++i) + for (i = 0; i < ebcnt && bbt[i]; ++i) addr0 += mtd->erasesize; /* Attempt to write off end of OOB */ diff --git a/drivers/mtd/tests/mtd_pagetest.c b/drivers/mtd/tests/mtd_pagetest.c index 9648818b9e2c..103cac480fee 100644 --- a/drivers/mtd/tests/mtd_pagetest.c +++ b/drivers/mtd/tests/mtd_pagetest.c @@ -116,11 +116,11 @@ static int verify_eraseblock(int ebnum) loff_t addr = ebnum * mtd->erasesize; addr0 = 0; - for (i = 0; bbt[i] && i < ebcnt; ++i) + for (i = 0; i < ebcnt && bbt[i]; ++i) addr0 += mtd->erasesize; addrn = mtd->size; - for (i = 0; bbt[ebcnt - i - 1] && i < ebcnt; ++i) + for (i = 0; i < ebcnt && bbt[ebcnt - i - 1]; ++i) addrn -= mtd->erasesize; set_random_data(writebuf, mtd->erasesize); @@ -219,11 +219,11 @@ static int crosstest(void) memset(pp1, 0, pgsize * 4); addr0 = 0; - for (i = 0; bbt[i] && i < ebcnt; ++i) + for (i = 0; i < ebcnt && bbt[i]; ++i) addr0 += mtd->erasesize; addrn = mtd->size; - for (i = 0; bbt[ebcnt - i - 1] && i < ebcnt; ++i) + for (i = 0; i < ebcnt && bbt[ebcnt - i - 1]; ++i) addrn -= mtd->erasesize; /* Read 2nd-to-last page to pp1 */ @@ -317,7 +317,7 @@ static int erasecrosstest(void) ebnum = 0; addr0 = 0; - for (i = 0; bbt[i] && i < ebcnt; ++i) { + for (i = 0; i < ebcnt && bbt[i]; ++i) { addr0 += mtd->erasesize; ebnum += 1; } @@ -413,7 +413,7 @@ static int erasetest(void) ebnum = 0; addr0 = 0; - for (i = 0; bbt[i] && i < ebcnt; ++i) { + for (i = 0; i < ebcnt && bbt[i]; ++i) { addr0 += mtd->erasesize; ebnum += 1; } |