diff options
Diffstat (limited to 'drivers')
48 files changed, 2563 insertions, 351 deletions
diff --git a/drivers/base/power/opp.c b/drivers/base/power/opp.c index f0077cb8e249..c8ec186303db 100644 --- a/drivers/base/power/opp.c +++ b/drivers/base/power/opp.c @@ -648,14 +648,14 @@ int opp_init_cpufreq_table(struct device *dev, list_for_each_entry(opp, &dev_opp->opp_list, node) { if (opp->available) { - freq_table[i].index = i; + freq_table[i].driver_data = i; freq_table[i].frequency = opp->rate / 1000; i++; } } mutex_unlock(&dev_opp_list_lock); - freq_table[i].index = i; + freq_table[i].driver_data = i; freq_table[i].frequency = CPUFREQ_TABLE_END; *table = &freq_table[0]; diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm index 6e57543fe0b9..fee9f489269a 100644 --- a/drivers/cpufreq/Kconfig.arm +++ b/drivers/cpufreq/Kconfig.arm @@ -5,6 +5,7 @@ config ARM_BIG_LITTLE_CPUFREQ tristate "Generic ARM big LITTLE CPUfreq driver" depends on ARM_CPU_TOPOLOGY && PM_OPP && HAVE_CLK + select CPU_FREQ_TABLE help This enables the Generic CPUfreq driver for ARM big.LITTLE platforms. @@ -18,6 +19,7 @@ config ARM_DT_BL_CPUFREQ config ARM_EXYNOS_CPUFREQ bool "SAMSUNG EXYNOS SoCs" depends on ARCH_EXYNOS + select CPU_FREQ_TABLE default y help This adds the CPUFreq driver common part for Samsung @@ -46,6 +48,7 @@ config ARM_EXYNOS5250_CPUFREQ config ARM_EXYNOS5440_CPUFREQ def_bool SOC_EXYNOS5440 depends on HAVE_CLK && PM_OPP && OF + select CPU_FREQ_TABLE help This adds the CPUFreq driver for Samsung EXYNOS5440 SoC. The nature of exynos5440 clock controller is @@ -55,7 +58,6 @@ config ARM_EXYNOS5440_CPUFREQ config ARM_HIGHBANK_CPUFREQ tristate "Calxeda Highbank-based" depends on ARCH_HIGHBANK - select CPU_FREQ_TABLE select GENERIC_CPUFREQ_CPU0 select PM_OPP select REGULATOR @@ -71,6 +73,7 @@ config ARM_IMX6Q_CPUFREQ tristate "Freescale i.MX6Q cpufreq support" depends on SOC_IMX6Q depends on REGULATOR_ANATOP + select CPU_FREQ_TABLE help This adds cpufreq driver support for Freescale i.MX6Q SOC. @@ -86,6 +89,7 @@ config ARM_INTEGRATOR config ARM_KIRKWOOD_CPUFREQ def_bool ARCH_KIRKWOOD && OF + select CPU_FREQ_TABLE help This adds the CPUFreq driver for Marvell Kirkwood SoCs. @@ -99,6 +103,7 @@ config ARM_OMAP2PLUS_CPUFREQ config ARM_S3C2416_CPUFREQ bool "S3C2416 CPU Frequency scaling support" depends on CPU_S3C2416 + select CPU_FREQ_TABLE help This adds the CPUFreq driver for the Samsung S3C2416 and S3C2450 SoC. The S3C2416 supports changing the rate of the @@ -121,6 +126,7 @@ config ARM_S3C2416_CPUFREQ_VCORESCALE config ARM_S3C64XX_CPUFREQ bool "Samsung S3C64XX" depends on CPU_S3C6410 + select CPU_FREQ_TABLE default y help This adds the CPUFreq driver for Samsung S3C6410 SoC. @@ -147,6 +153,15 @@ config ARM_SA1110_CPUFREQ config ARM_SPEAR_CPUFREQ bool "SPEAr CPUFreq support" depends on PLAT_SPEAR + select CPU_FREQ_TABLE default y help This adds the CPUFreq driver support for SPEAr SOCs. + +config ARM_TEGRA_CPUFREQ + bool "TEGRA CPUFreq support" + depends on ARCH_TEGRA + select CPU_FREQ_TABLE + default y + help + This adds the CPUFreq driver support for TEGRA SOCs. diff --git a/drivers/cpufreq/Kconfig.powerpc b/drivers/cpufreq/Kconfig.powerpc index 9c926ca0d718..25ca9db62e09 100644 --- a/drivers/cpufreq/Kconfig.powerpc +++ b/drivers/cpufreq/Kconfig.powerpc @@ -1,6 +1,7 @@ config CPU_FREQ_CBE tristate "CBE frequency scaling" depends on CBE_RAS && PPC_CELL + select CPU_FREQ_TABLE default m help This adds the cpufreq driver for Cell BE processors. @@ -23,3 +24,39 @@ config CPU_FREQ_MAPLE help This adds support for frequency switching on Maple 970FX Evaluation Board and compatible boards (IBM JS2x blades). + +config PPC_CORENET_CPUFREQ + tristate "CPU frequency scaling driver for Freescale E500MC SoCs" + depends on PPC_E500MC && OF && COMMON_CLK + select CPU_FREQ_TABLE + select CLK_PPC_CORENET + help + This adds the CPUFreq driver support for Freescale e500mc, + e5500 and e6500 series SoCs which are capable of changing + the CPU's frequency dynamically. + +config CPU_FREQ_PMAC + bool "Support for Apple PowerBooks" + depends on ADB_PMU && PPC32 + select CPU_FREQ_TABLE + help + This adds support for frequency switching on Apple PowerBooks, + this currently includes some models of iBook & Titanium + PowerBook. + +config CPU_FREQ_PMAC64 + bool "Support for some Apple G5s" + depends on PPC_PMAC && PPC64 + select CPU_FREQ_TABLE + help + This adds support for frequency switching on Apple iMac G5, + and some of the more recent desktop G5 machines as well. + +config PPC_PASEMI_CPUFREQ + bool "Support for PA Semi PWRficient" + depends on PPC_PASEMI + select CPU_FREQ_TABLE + default y + help + This adds the support for frequency switching on PA Semi + PWRficient processors. diff --git a/drivers/cpufreq/Kconfig.x86 b/drivers/cpufreq/Kconfig.x86 index 6bd63d63d356..e2b6eabef221 100644 --- a/drivers/cpufreq/Kconfig.x86 +++ b/drivers/cpufreq/Kconfig.x86 @@ -132,6 +132,7 @@ config X86_POWERNOW_K8 config X86_AMD_FREQ_SENSITIVITY tristate "AMD frequency sensitivity feedback powersave bias" depends on CPU_FREQ_GOV_ONDEMAND && X86_ACPI_CPUFREQ && CPU_SUP_AMD + select CPU_FREQ_TABLE help This adds AMD-specific powersave bias function to the ondemand governor, which allows it to make more power-conscious frequency diff --git a/drivers/cpufreq/Makefile b/drivers/cpufreq/Makefile index 315b9231feb1..0c8d0c69306d 100644 --- a/drivers/cpufreq/Makefile +++ b/drivers/cpufreq/Makefile @@ -71,7 +71,7 @@ obj-$(CONFIG_ARM_S5PV210_CPUFREQ) += s5pv210-cpufreq.o obj-$(CONFIG_ARM_SA1100_CPUFREQ) += sa1100-cpufreq.o obj-$(CONFIG_ARM_SA1110_CPUFREQ) += sa1110-cpufreq.o obj-$(CONFIG_ARM_SPEAR_CPUFREQ) += spear-cpufreq.o -obj-$(CONFIG_ARCH_TEGRA) += tegra-cpufreq.o +obj-$(CONFIG_ARM_TEGRA_CPUFREQ) += tegra-cpufreq.o ################################################################################## # PowerPC platform drivers @@ -79,11 +79,15 @@ obj-$(CONFIG_CPU_FREQ_CBE) += ppc-cbe-cpufreq.o ppc-cbe-cpufreq-y += ppc_cbe_cpufreq_pervasive.o ppc_cbe_cpufreq.o obj-$(CONFIG_CPU_FREQ_CBE_PMI) += ppc_cbe_cpufreq_pmi.o obj-$(CONFIG_CPU_FREQ_MAPLE) += maple-cpufreq.o +obj-$(CONFIG_PPC_CORENET_CPUFREQ) += ppc-corenet-cpufreq.o +obj-$(CONFIG_CPU_FREQ_PMAC) += pmac32-cpufreq.o +obj-$(CONFIG_CPU_FREQ_PMAC64) += pmac64-cpufreq.o +obj-$(CONFIG_PPC_PASEMI_CPUFREQ) += pasemi-cpufreq.o ################################################################################## # Other platform drivers obj-$(CONFIG_AVR32_AT32AP_CPUFREQ) += at32ap-cpufreq.o -obj-$(CONFIG_BLACKFIN) += blackfin-cpufreq.o +obj-$(CONFIG_BFIN_CPU_FREQ) += blackfin-cpufreq.o obj-$(CONFIG_CRIS_MACH_ARTPEC3) += cris-artpec3-cpufreq.o obj-$(CONFIG_ETRAXFS) += cris-etraxfs-cpufreq.o obj-$(CONFIG_IA64_ACPI_CPUFREQ) += ia64-acpi-cpufreq.o diff --git a/drivers/cpufreq/acpi-cpufreq.c b/drivers/cpufreq/acpi-cpufreq.c index b8efacf01d69..f4fef0acc183 100644 --- a/drivers/cpufreq/acpi-cpufreq.c +++ b/drivers/cpufreq/acpi-cpufreq.c @@ -232,7 +232,7 @@ static unsigned extract_msr(u32 msr, struct acpi_cpufreq_data *data) perf = data->acpi_data; for (i = 0; data->freq_table[i].frequency != CPUFREQ_TABLE_END; i++) { - if (msr == perf->states[data->freq_table[i].index].status) + if (msr == perf->states[data->freq_table[i].driver_data].status) return data->freq_table[i].frequency; } return data->freq_table[0].frequency; @@ -442,7 +442,7 @@ static int acpi_cpufreq_target(struct cpufreq_policy *policy, goto out; } - next_perf_state = data->freq_table[next_state].index; + next_perf_state = data->freq_table[next_state].driver_data; if (perf->state == next_perf_state) { if (unlikely(data->resume)) { pr_debug("Called after resume, resetting to P%d\n", @@ -494,12 +494,14 @@ static int acpi_cpufreq_target(struct cpufreq_policy *policy, pr_debug("acpi_cpufreq_target failed (%d)\n", policy->cpu); result = -EAGAIN; - goto out; + freqs.new = freqs.old; } } cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE); - perf->state = next_perf_state; + + if (!result) + perf->state = next_perf_state; out: return result; @@ -811,7 +813,7 @@ static int acpi_cpufreq_cpu_init(struct cpufreq_policy *policy) data->freq_table[valid_states-1].frequency / 1000) continue; - data->freq_table[valid_states].index = i; + data->freq_table[valid_states].driver_data = i; data->freq_table[valid_states].frequency = perf->states[i].core_frequency * 1000; valid_states++; @@ -947,7 +949,7 @@ static void __init acpi_cpufreq_boost_init(void) /* We create the boost file in any case, though for systems without * hardware support it will be read-only and hardwired to return 0. */ - if (sysfs_create_file(cpufreq_global_kobject, &(global_boost.attr))) + if (cpufreq_sysfs_create_file(&(global_boost.attr))) pr_warn(PFX "could not register global boost sysfs file\n"); else pr_debug("registered global boost sysfs file\n"); @@ -955,7 +957,7 @@ static void __init acpi_cpufreq_boost_init(void) static void __exit acpi_cpufreq_boost_exit(void) { - sysfs_remove_file(cpufreq_global_kobject, &(global_boost.attr)); + cpufreq_sysfs_remove_file(&(global_boost.attr)); if (msrs) { unregister_cpu_notifier(&boost_nb); diff --git a/drivers/cpufreq/arm_big_little.c b/drivers/cpufreq/arm_big_little.c index 5d7f53fcd6f5..3549f0784af1 100644 --- a/drivers/cpufreq/arm_big_little.c +++ b/drivers/cpufreq/arm_big_little.c @@ -84,11 +84,9 @@ static int bL_cpufreq_set_target(struct cpufreq_policy *policy, ret = clk_set_rate(clk[cur_cluster], freqs.new * 1000); if (ret) { pr_err("clk_set_rate failed: %d\n", ret); - return ret; + freqs.new = freqs.old; } - policy->cur = freqs.new; - cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE); return ret; diff --git a/drivers/cpufreq/blackfin-cpufreq.c b/drivers/cpufreq/blackfin-cpufreq.c index 995511e80bef..9cdbbd278a80 100644 --- a/drivers/cpufreq/blackfin-cpufreq.c +++ b/drivers/cpufreq/blackfin-cpufreq.c @@ -20,23 +20,23 @@ /* this is the table of CCLK frequencies, in Hz */ -/* .index is the entry in the auxiliary dpm_state_table[] */ +/* .driver_data is the entry in the auxiliary dpm_state_table[] */ static struct cpufreq_frequency_table bfin_freq_table[] = { { .frequency = CPUFREQ_TABLE_END, - .index = 0, + .driver_data = 0, }, { .frequency = CPUFREQ_TABLE_END, - .index = 1, + .driver_data = 1, }, { .frequency = CPUFREQ_TABLE_END, - .index = 2, + .driver_data = 2, }, { .frequency = CPUFREQ_TABLE_END, - .index = 0, + .driver_data = 0, }, }; diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c index 2d53f47d1747..d976e222f10f 100644 --- a/drivers/cpufreq/cpufreq.c +++ b/drivers/cpufreq/cpufreq.c @@ -3,6 +3,7 @@ * * Copyright (C) 2001 Russell King * (C) 2002 - 2003 Dominik Brodowski <linux@brodo.de> + * (C) 2013 Viresh Kumar <viresh.kumar@linaro.org> * * Oct 2005 - Ashok Raj <ashok.raj@intel.com> * Added handling for CPU hotplug @@ -12,12 +13,13 @@ * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. - * */ #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt +#include <asm/cputime.h> #include <linux/kernel.h> +#include <linux/kernel_stat.h> #include <linux/module.h> #include <linux/init.h> #include <linux/notifier.h> @@ -25,6 +27,7 @@ #include <linux/delay.h> #include <linux/interrupt.h> #include <linux/spinlock.h> +#include <linux/tick.h> #include <linux/device.h> #include <linux/slab.h> #include <linux/cpu.h> @@ -41,11 +44,13 @@ */ static struct cpufreq_driver *cpufreq_driver; static DEFINE_PER_CPU(struct cpufreq_policy *, cpufreq_cpu_data); +static DEFINE_RWLOCK(cpufreq_driver_lock); +static DEFINE_MUTEX(cpufreq_governor_lock); + #ifdef CONFIG_HOTPLUG_CPU /* This one keeps track of the previously set governor of a removed CPU */ static DEFINE_PER_CPU(char[CPUFREQ_NAME_LEN], cpufreq_cpu_governor); #endif -static DEFINE_RWLOCK(cpufreq_driver_lock); /* * cpu_policy_rwsem is a per CPU reader-writer semaphore designed to cure @@ -132,6 +137,51 @@ bool have_governor_per_policy(void) { return cpufreq_driver->have_governor_per_policy; } +EXPORT_SYMBOL_GPL(have_governor_per_policy); + +struct kobject *get_governor_parent_kobj(struct cpufreq_policy *policy) +{ + if (have_governor_per_policy()) + return &policy->kobj; + else + return cpufreq_global_kobject; +} +EXPORT_SYMBOL_GPL(get_governor_parent_kobj); + +static inline u64 get_cpu_idle_time_jiffy(unsigned int cpu, u64 *wall) +{ + u64 idle_time; + u64 cur_wall_time; + u64 busy_time; + + cur_wall_time = jiffies64_to_cputime64(get_jiffies_64()); + + busy_time = kcpustat_cpu(cpu).cpustat[CPUTIME_USER]; + busy_time += kcpustat_cpu(cpu).cpustat[CPUTIME_SYSTEM]; + busy_time += kcpustat_cpu(cpu).cpustat[CPUTIME_IRQ]; + busy_time += kcpustat_cpu(cpu).cpustat[CPUTIME_SOFTIRQ]; + busy_time += kcpustat_cpu(cpu).cpustat[CPUTIME_STEAL]; + busy_time += kcpustat_cpu(cpu).cpustat[CPUTIME_NICE]; + + idle_time = cur_wall_time - busy_time; + if (wall) + *wall = cputime_to_usecs(cur_wall_time); + + return cputime_to_usecs(idle_time); +} + +u64 get_cpu_idle_time(unsigned int cpu, u64 *wall, int io_busy) +{ + u64 idle_time = get_cpu_idle_time_us(cpu, io_busy ? wall : NULL); + + if (idle_time == -1ULL) + return get_cpu_idle_time_jiffy(cpu, wall); + else if (!io_busy) + idle_time += get_cpu_iowait_time_us(cpu, wall); + + return idle_time; +} +EXPORT_SYMBOL_GPL(get_cpu_idle_time); static struct cpufreq_policy *__cpufreq_cpu_get(unsigned int cpu, bool sysfs) { @@ -150,7 +200,6 @@ static struct cpufreq_policy *__cpufreq_cpu_get(unsigned int cpu, bool sysfs) if (!try_module_get(cpufreq_driver->owner)) goto err_out_unlock; - /* get the CPU */ data = per_cpu(cpufreq_cpu_data, cpu); @@ -220,7 +269,7 @@ static void cpufreq_cpu_put_sysfs(struct cpufreq_policy *data) */ #ifndef CONFIG_SMP static unsigned long l_p_j_ref; -static unsigned int l_p_j_ref_freq; +static unsigned int l_p_j_ref_freq; static void adjust_jiffies(unsigned long val, struct cpufreq_freqs *ci) { @@ -233,7 +282,7 @@ static void adjust_jiffies(unsigned long val, struct cpufreq_freqs *ci) pr_debug("saving %lu as reference value for loops_per_jiffy; " "freq is %u kHz\n", l_p_j_ref, l_p_j_ref_freq); } - if ((val == CPUFREQ_POSTCHANGE && ci->old != ci->new) || + if ((val == CPUFREQ_POSTCHANGE && ci->old != ci->new) || (val == CPUFREQ_RESUMECHANGE || val == CPUFREQ_SUSPENDCHANGE)) { loops_per_jiffy = cpufreq_scale(l_p_j_ref, l_p_j_ref_freq, ci->new); @@ -248,8 +297,7 @@ static inline void adjust_jiffies(unsigned long val, struct cpufreq_freqs *ci) } #endif - -void __cpufreq_notify_transition(struct cpufreq_policy *policy, +static void __cpufreq_notify_transition(struct cpufreq_policy *policy, struct cpufreq_freqs *freqs, unsigned int state) { BUG_ON(irqs_disabled()); @@ -294,6 +342,7 @@ void __cpufreq_notify_transition(struct cpufreq_policy *policy, break; } } + /** * cpufreq_notify_transition - call notifier chain and adjust_jiffies * on frequency transition. @@ -311,7 +360,6 @@ void cpufreq_notify_transition(struct cpufreq_policy *policy, EXPORT_SYMBOL_GPL(cpufreq_notify_transition); - /********************************************************************* * SYSFS INTERFACE * *********************************************************************/ @@ -376,7 +424,6 @@ out: return err; } - /** * cpufreq_per_cpu_attr_read() / show_##file_name() - * print out cpufreq information @@ -441,7 +488,6 @@ static ssize_t show_cpuinfo_cur_freq(struct cpufreq_policy *policy, return sprintf(buf, "%u\n", cur_freq); } - /** * show_scaling_governor - show the current policy for the specified CPU */ @@ -457,7 +503,6 @@ static ssize_t show_scaling_governor(struct cpufreq_policy *policy, char *buf) return -EINVAL; } - /** * store_scaling_governor - store policy for the specified CPU */ @@ -480,8 +525,10 @@ static ssize_t store_scaling_governor(struct cpufreq_policy *policy, &new_policy.governor)) return -EINVAL; - /* Do not use cpufreq_set_policy here or the user_policy.max - will be wrongly overridden */ + /* + * Do not use cpufreq_set_policy here or the user_policy.max + * will be wrongly overridden + */ ret = __cpufreq_set_policy(policy, &new_policy); policy->user_policy.policy = policy->policy; @@ -630,9 +677,6 @@ static struct attribute *default_attrs[] = { NULL }; -struct kobject *cpufreq_global_kobject; -EXPORT_SYMBOL(cpufreq_global_kobject); - #define to_policy(k) container_of(k, struct cpufreq_policy, kobj) #define to_attr(a) container_of(a, struct freq_attr, attr) @@ -703,6 +747,49 @@ static struct kobj_type ktype_cpufreq = { .release = cpufreq_sysfs_release, }; +struct kobject *cpufreq_global_kobject; +EXPORT_SYMBOL(cpufreq_global_kobject); + +static int cpufreq_global_kobject_usage; + +int cpufreq_get_global_kobject(void) +{ + if (!cpufreq_global_kobject_usage++) + return kobject_add(cpufreq_global_kobject, + &cpu_subsys.dev_root->kobj, "%s", "cpufreq"); + + return 0; +} +EXPORT_SYMBOL(cpufreq_get_global_kobject); + +void cpufreq_put_global_kobject(void) +{ + if (!--cpufreq_global_kobject_usage) + kobject_del(cpufreq_global_kobject); +} +EXPORT_SYMBOL(cpufreq_put_global_kobject); + +int cpufreq_sysfs_create_file(const struct attribute *attr) +{ + int ret = cpufreq_get_global_kobject(); + + if (!ret) { + ret = sysfs_create_file(cpufreq_global_kobject, attr); + if (ret) + cpufreq_put_global_kobject(); + } + + return ret; +} +EXPORT_SYMBOL(cpufreq_sysfs_create_file); + +void cpufreq_sysfs_remove_file(const struct attribute *attr) +{ + sysfs_remove_file(cpufreq_global_kobject, attr); + cpufreq_put_global_kobject(); +} +EXPORT_SYMBOL(cpufreq_sysfs_remove_file); + /* symlink affected CPUs */ static int cpufreq_add_dev_symlink(unsigned int cpu, struct cpufreq_policy *policy) @@ -1005,7 +1092,8 @@ static void update_policy_cpu(struct cpufreq_policy *policy, unsigned int cpu) * Caller should already have policy_rwsem in write mode for this CPU. * This routine frees the rwsem before returning. */ -static int __cpufreq_remove_dev(struct device *dev, struct subsys_interface *sif) +static int __cpufreq_remove_dev(struct device *dev, + struct subsys_interface *sif) { unsigned int cpu = dev->id, ret, cpus; unsigned long flags; @@ -1112,7 +1200,6 @@ static int __cpufreq_remove_dev(struct device *dev, struct subsys_interface *sif return 0; } - static int cpufreq_remove_dev(struct device *dev, struct subsys_interface *sif) { unsigned int cpu = dev->id; @@ -1125,7 +1212,6 @@ static int cpufreq_remove_dev(struct device *dev, struct subsys_interface *sif) return retval; } - static void handle_update(struct work_struct *work) { struct cpufreq_policy *policy = @@ -1136,7 +1222,8 @@ static void handle_update(struct work_struct *work) } /** - * cpufreq_out_of_sync - If actual and saved CPU frequency differs, we're in deep trouble. + * cpufreq_out_of_sync - If actual and saved CPU frequency differs, we're + * in deep trouble. * @cpu: cpu number * @old_freq: CPU frequency the kernel thinks the CPU runs at * @new_freq: CPU frequency the CPU actually runs at @@ -1151,7 +1238,6 @@ static void cpufreq_out_of_sync(unsigned int cpu, unsigned int old_freq, struct cpufreq_freqs freqs; unsigned long flags; - pr_debug("Warning: CPU frequency out of sync: cpufreq and timing " "core thinks of %u, is %u kHz.\n", old_freq, new_freq); @@ -1166,7 +1252,6 @@ static void cpufreq_out_of_sync(unsigned int cpu, unsigned int old_freq, cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE); } - /** * cpufreq_quick_get - get the CPU frequency (in kHz) from policy->cur * @cpu: CPU number @@ -1212,7 +1297,6 @@ unsigned int cpufreq_quick_get_max(unsigned int cpu) } EXPORT_SYMBOL(cpufreq_quick_get_max); - static unsigned int __cpufreq_get(unsigned int cpu) { struct cpufreq_policy *policy = per_cpu(cpufreq_cpu_data, cpu); @@ -1271,7 +1355,6 @@ static struct subsys_interface cpufreq_interface = { .remove_dev = cpufreq_remove_dev, }; - /** * cpufreq_bp_suspend - Prepare the boot CPU for system suspend. * @@ -1408,11 +1491,10 @@ int cpufreq_register_notifier(struct notifier_block *nb, unsigned int list) } EXPORT_SYMBOL(cpufreq_register_notifier); - /** * cpufreq_unregister_notifier - unregister a driver with cpufreq * @nb: notifier block to be unregistered - * @list: CPUFREQ_TRANSITION_NOTIFIER or CPUFREQ_POLICY_NOTIFIER + * @list: CPUFREQ_TRANSITION_NOTIFIER or CPUFREQ_POLICY_NOTIFIER * * Remove a driver from the CPU frequency notifier list. * @@ -1448,7 +1530,6 @@ EXPORT_SYMBOL(cpufreq_unregister_notifier); * GOVERNORS * *********************************************************************/ - int __cpufreq_driver_target(struct cpufreq_policy *policy, unsigned int target_freq, unsigned int relation) @@ -1484,10 +1565,6 @@ int cpufreq_driver_target(struct cpufreq_policy *policy, { int ret = -EINVAL; - policy = cpufreq_cpu_get(policy->cpu); - if (!policy) - goto no_policy; - if (unlikely(lock_policy_rwsem_write(policy->cpu))) goto fail; @@ -1496,30 +1573,19 @@ int cpufreq_driver_target(struct cpufreq_policy *policy, unlock_policy_rwsem_write(policy->cpu); fail: - cpufreq_cpu_put(policy); -no_policy: return ret; } EXPORT_SYMBOL_GPL(cpufreq_driver_target); int __cpufreq_driver_getavg(struct cpufreq_policy *policy, unsigned int cpu) { - int ret = 0; - if (cpufreq_disabled()) - return ret; + return 0; if (!cpufreq_driver->getavg) return 0; - policy = cpufreq_cpu_get(policy->cpu); - if (!policy) - return -EINVAL; - - ret = cpufreq_driver->getavg(policy, cpu); - - cpufreq_cpu_put(policy); - return ret; + return cpufreq_driver->getavg(policy, cpu); } EXPORT_SYMBOL_GPL(__cpufreq_driver_getavg); @@ -1562,6 +1628,21 @@ static int __cpufreq_governor(struct cpufreq_policy *policy, pr_debug("__cpufreq_governor for CPU %u, event %u\n", policy->cpu, event); + + mutex_lock(&cpufreq_governor_lock); + if ((!policy->governor_enabled && (event == CPUFREQ_GOV_STOP)) || + (policy->governor_enabled && (event == CPUFREQ_GOV_START))) { + mutex_unlock(&cpufreq_governor_lock); + return -EBUSY; + } + + if (event == CPUFREQ_GOV_STOP) + policy->governor_enabled = false; + else if (event == CPUFREQ_GOV_START) + policy->governor_enabled = true; + + mutex_unlock(&cpufreq_governor_lock); + ret = policy->governor->governor(policy, event); if (!ret) { @@ -1569,6 +1650,14 @@ static int __cpufreq_governor(struct cpufreq_policy *policy, policy->governor->initialized++; else if (event == CPUFREQ_GOV_POLICY_EXIT) policy->governor->initialized--; + } else { + /* Restore original values */ + mutex_lock(&cpufreq_governor_lock); + if (event == CPUFREQ_GOV_STOP) + policy->governor_enabled = true; + else if (event == CPUFREQ_GOV_START) + policy->governor_enabled = false; + mutex_unlock(&cpufreq_governor_lock); } /* we keep one module reference alive for @@ -1581,7 +1670,6 @@ static int __cpufreq_governor(struct cpufreq_policy *policy, return ret; } - int cpufreq_register_governor(struct cpufreq_governor *governor) { int err; @@ -1606,7 +1694,6 @@ int cpufreq_register_governor(struct cpufreq_governor *governor) } EXPORT_SYMBOL_GPL(cpufreq_register_governor); - void cpufreq_unregister_governor(struct cpufreq_governor *governor) { #ifdef CONFIG_HOTPLUG_CPU @@ -1636,7 +1723,6 @@ void cpufreq_unregister_governor(struct cpufreq_governor *governor) EXPORT_SYMBOL_GPL(cpufreq_unregister_governor); - /********************************************************************* * POLICY INTERFACE * *********************************************************************/ @@ -1665,7 +1751,6 @@ int cpufreq_get_policy(struct cpufreq_policy *policy, unsigned int cpu) } EXPORT_SYMBOL(cpufreq_get_policy); - /* * data : current policy. * policy : policy to be set. @@ -1699,8 +1784,10 @@ static int __cpufreq_set_policy(struct cpufreq_policy *data, blocking_notifier_call_chain(&cpufreq_policy_notifier_list, CPUFREQ_INCOMPATIBLE, policy); - /* verify the cpu speed can be set within this limit, - which might be different to the first one */ + /* + * verify the cpu speed can be set within this limit, which might be + * different to the first one + */ ret = cpufreq_driver->verify(policy); if (ret) goto error_out; @@ -1802,8 +1889,10 @@ int cpufreq_update_policy(unsigned int cpu) policy.policy = data->user_policy.policy; policy.governor = data->user_policy.governor; - /* BIOS might change freq behind our back - -> ask driver for current freq and notify governors about a change */ + /* + * BIOS might change freq behind our back + * -> ask driver for current freq and notify governors about a change + */ if (cpufreq_driver->get) { policy.cur = cpufreq_driver->get(cpu); if (!data->cur) { @@ -1852,7 +1941,7 @@ static int __cpuinit cpufreq_cpu_callback(struct notifier_block *nfb, } static struct notifier_block __refdata cpufreq_cpu_notifier = { - .notifier_call = cpufreq_cpu_callback, + .notifier_call = cpufreq_cpu_callback, }; /********************************************************************* @@ -1864,7 +1953,7 @@ static struct notifier_block __refdata cpufreq_cpu_notifier = { * @driver_data: A struct cpufreq_driver containing the values# * submitted by the CPU Frequency driver. * - * Registers a CPU Frequency driver to this core code. This code + * Registers a CPU Frequency driver to this core code. This code * returns zero on success, -EBUSY when another driver got here first * (and isn't unregistered in the meantime). * @@ -1931,11 +2020,10 @@ err_null_driver: } EXPORT_SYMBOL_GPL(cpufreq_register_driver); - /** * cpufreq_unregister_driver - unregister the current CPUFreq driver * - * Unregister the current CPUFreq driver. Only call this if you have + * Unregister the current CPUFreq driver. Only call this if you have * the right to do so, i.e. if you have succeeded in initialising before! * Returns zero if successful, and -EINVAL if the cpufreq_driver is * currently not initialised. @@ -1972,7 +2060,7 @@ static int __init cpufreq_core_init(void) init_rwsem(&per_cpu(cpu_policy_rwsem, cpu)); } - cpufreq_global_kobject = kobject_create_and_add("cpufreq", &cpu_subsys.dev_root->kobj); + cpufreq_global_kobject = kobject_create(); BUG_ON(!cpufreq_global_kobject); register_syscore_ops(&cpufreq_syscore_ops); diff --git a/drivers/cpufreq/cpufreq_governor.c b/drivers/cpufreq/cpufreq_governor.c index dc9b72e25c1a..a849b2d499fa 100644 --- a/drivers/cpufreq/cpufreq_governor.c +++ b/drivers/cpufreq/cpufreq_governor.c @@ -23,21 +23,12 @@ #include <linux/kernel_stat.h> #include <linux/mutex.h> #include <linux/slab.h> -#include <linux/tick.h> #include <linux/types.h> #include <linux/workqueue.h> #include <linux/cpu.h> #include "cpufreq_governor.h" -static struct kobject *get_governor_parent_kobj(struct cpufreq_policy *policy) -{ - if (have_governor_per_policy()) - return &policy->kobj; - else - return cpufreq_global_kobject; -} - static struct attribute_group *get_sysfs_attr(struct dbs_data *dbs_data) { if (have_governor_per_policy()) @@ -46,41 +37,6 @@ static struct attribute_group *get_sysfs_attr(struct dbs_data *dbs_data) return dbs_data->cdata->attr_group_gov_sys; } -static inline u64 get_cpu_idle_time_jiffy(unsigned int cpu, u64 *wall) -{ - u64 idle_time; - u64 cur_wall_time; - u64 busy_time; - - cur_wall_time = jiffies64_to_cputime64(get_jiffies_64()); - - busy_time = kcpustat_cpu(cpu).cpustat[CPUTIME_USER]; - busy_time += kcpustat_cpu(cpu).cpustat[CPUTIME_SYSTEM]; - busy_time += kcpustat_cpu(cpu).cpustat[CPUTIME_IRQ]; - busy_time += kcpustat_cpu(cpu).cpustat[CPUTIME_SOFTIRQ]; - busy_time += kcpustat_cpu(cpu).cpustat[CPUTIME_STEAL]; - busy_time += kcpustat_cpu(cpu).cpustat[CPUTIME_NICE]; - - idle_time = cur_wall_time - busy_time; - if (wall) - *wall = cputime_to_usecs(cur_wall_time); - - return cputime_to_usecs(idle_time); -} - -u64 get_cpu_idle_time(unsigned int cpu, u64 *wall, int io_busy) -{ - u64 idle_time = get_cpu_idle_time_us(cpu, io_busy ? wall : NULL); - - if (idle_time == -1ULL) - return get_cpu_idle_time_jiffy(cpu, wall); - else if (!io_busy) - idle_time += get_cpu_iowait_time_us(cpu, wall); - - return idle_time; -} -EXPORT_SYMBOL_GPL(get_cpu_idle_time); - void dbs_check_cpu(struct dbs_data *dbs_data, int cpu) { struct cpu_dbs_common_info *cdbs = dbs_data->cdata->get_cpu_cdbs(cpu); @@ -278,6 +234,9 @@ int cpufreq_governor_dbs(struct cpufreq_policy *policy, return rc; } + if (!have_governor_per_policy()) + WARN_ON(cpufreq_get_global_kobject()); + rc = sysfs_create_group(get_governor_parent_kobj(policy), get_sysfs_attr(dbs_data)); if (rc) { @@ -316,6 +275,9 @@ int cpufreq_governor_dbs(struct cpufreq_policy *policy, sysfs_remove_group(get_governor_parent_kobj(policy), get_sysfs_attr(dbs_data)); + if (!have_governor_per_policy()) + cpufreq_put_global_kobject(); + if ((dbs_data->cdata->governor == GOV_CONSERVATIVE) && (policy->governor->initialized == 1)) { struct cs_ops *cs_ops = dbs_data->cdata->gov_ops; diff --git a/drivers/cpufreq/cpufreq_governor.h b/drivers/cpufreq/cpufreq_governor.h index e16a96130cb3..6663ec3b3056 100644 --- a/drivers/cpufreq/cpufreq_governor.h +++ b/drivers/cpufreq/cpufreq_governor.h @@ -81,7 +81,7 @@ static ssize_t show_##file_name##_gov_sys \ return sprintf(buf, "%u\n", tuners->file_name); \ } \ \ -static ssize_t show_##file_name##_gov_pol \ +static ssize_t show_##file_name##_gov_pol \ (struct cpufreq_policy *policy, char *buf) \ { \ struct dbs_data *dbs_data = policy->governor_data; \ @@ -91,7 +91,7 @@ static ssize_t show_##file_name##_gov_pol \ #define store_one(_gov, file_name) \ static ssize_t store_##file_name##_gov_sys \ -(struct kobject *kobj, struct attribute *attr, const char *buf, size_t count) \ +(struct kobject *kobj, struct attribute *attr, const char *buf, size_t count) \ { \ struct dbs_data *dbs_data = _gov##_dbs_cdata.gdbs_data; \ return store_##file_name(dbs_data, buf, count); \ @@ -256,7 +256,6 @@ static ssize_t show_sampling_rate_min_gov_pol \ return sprintf(buf, "%u\n", dbs_data->min_sampling_rate); \ } -u64 get_cpu_idle_time(unsigned int cpu, u64 *wall, int io_busy); void dbs_check_cpu(struct dbs_data *dbs_data, int cpu); bool need_load_eval(struct cpu_dbs_common_info *cdbs, unsigned int sampling_rate); diff --git a/drivers/cpufreq/cpufreq_performance.c b/drivers/cpufreq/cpufreq_performance.c index ceee06849b91..9fef7d6e4e6a 100644 --- a/drivers/cpufreq/cpufreq_performance.c +++ b/drivers/cpufreq/cpufreq_performance.c @@ -17,7 +17,6 @@ #include <linux/cpufreq.h> #include <linux/init.h> - static int cpufreq_governor_performance(struct cpufreq_policy *policy, unsigned int event) { @@ -44,19 +43,16 @@ struct cpufreq_governor cpufreq_gov_performance = { .owner = THIS_MODULE, }; - static int __init cpufreq_gov_performance_init(void) { return cpufreq_register_governor(&cpufreq_gov_performance); } - static void __exit cpufreq_gov_performance_exit(void) { cpufreq_unregister_governor(&cpufreq_gov_performance); } - MODULE_AUTHOR("Dominik Brodowski <linux@brodo.de>"); MODULE_DESCRIPTION("CPUfreq policy governor 'performance'"); MODULE_LICENSE("GPL"); diff --git a/drivers/cpufreq/cpufreq_powersave.c b/drivers/cpufreq/cpufreq_powersave.c index 2d948a171155..32109a14f5dc 100644 --- a/drivers/cpufreq/cpufreq_powersave.c +++ b/drivers/cpufreq/cpufreq_powersave.c @@ -1,7 +1,7 @@ /* - * linux/drivers/cpufreq/cpufreq_powersave.c + * linux/drivers/cpufreq/cpufreq_powersave.c * - * Copyright (C) 2002 - 2003 Dominik Brodowski <linux@brodo.de> + * Copyright (C) 2002 - 2003 Dominik Brodowski <linux@brodo.de> * * * This program is free software; you can redistribute it and/or modify @@ -48,13 +48,11 @@ static int __init cpufreq_gov_powersave_init(void) return cpufreq_register_governor(&cpufreq_gov_powersave); } - static void __exit cpufreq_gov_powersave_exit(void) { cpufreq_unregister_governor(&cpufreq_gov_powersave); } - MODULE_AUTHOR("Dominik Brodowski <linux@brodo.de>"); MODULE_DESCRIPTION("CPUfreq policy governor 'powersave'"); MODULE_LICENSE("GPL"); diff --git a/drivers/cpufreq/cpufreq_stats.c b/drivers/cpufreq/cpufreq_stats.c index fb65decffa28..6d35caa91167 100644 --- a/drivers/cpufreq/cpufreq_stats.c +++ b/drivers/cpufreq/cpufreq_stats.c @@ -27,7 +27,7 @@ static spinlock_t cpufreq_stats_lock; struct cpufreq_stats { unsigned int cpu; unsigned int total_trans; - unsigned long long last_time; + unsigned long long last_time; unsigned int max_state; unsigned int state_num; unsigned int last_index; @@ -116,7 +116,7 @@ static ssize_t show_trans_table(struct cpufreq_policy *policy, char *buf) len += snprintf(buf + len, PAGE_SIZE - len, "%9u: ", stat->freq_table[i]); - for (j = 0; j < stat->state_num; j++) { + for (j = 0; j < stat->state_num; j++) { if (len >= PAGE_SIZE) break; len += snprintf(buf + len, PAGE_SIZE - len, "%9u ", diff --git a/drivers/cpufreq/cpufreq_userspace.c b/drivers/cpufreq/cpufreq_userspace.c index bbeb9c0720a6..03078090b5f7 100644 --- a/drivers/cpufreq/cpufreq_userspace.c +++ b/drivers/cpufreq/cpufreq_userspace.c @@ -13,55 +13,13 @@ #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/smp.h> -#include <linux/init.h> -#include <linux/spinlock.h> -#include <linux/interrupt.h> #include <linux/cpufreq.h> -#include <linux/cpu.h> -#include <linux/types.h> -#include <linux/fs.h> -#include <linux/sysfs.h> +#include <linux/init.h> +#include <linux/module.h> #include <linux/mutex.h> -/** - * A few values needed by the userspace governor - */ -static DEFINE_PER_CPU(unsigned int, cpu_max_freq); -static DEFINE_PER_CPU(unsigned int, cpu_min_freq); -static DEFINE_PER_CPU(unsigned int, cpu_cur_freq); /* current CPU freq */ -static DEFINE_PER_CPU(unsigned int, cpu_set_freq); /* CPU freq desired by - userspace */ static DEFINE_PER_CPU(unsigned int, cpu_is_managed); - static DEFINE_MUTEX(userspace_mutex); -static int cpus_using_userspace_governor; - -/* keep track of frequency transitions */ -static int -userspace_cpufreq_notifier(struct notifier_block *nb, unsigned long val, - void *data) -{ - struct cpufreq_freqs *freq = data; - - if (!per_cpu(cpu_is_managed, freq->cpu)) - return 0; - - if (val == CPUFREQ_POSTCHANGE) { - pr_debug("saving cpu_cur_freq of cpu %u to be %u kHz\n", - freq->cpu, freq->new); - per_cpu(cpu_cur_freq, freq->cpu) = freq->new; - } - - return 0; -} - -static struct notifier_block userspace_cpufreq_notifier_block = { - .notifier_call = userspace_cpufreq_notifier -}; - /** * cpufreq_set - set the CPU frequency @@ -80,13 +38,6 @@ static int cpufreq_set(struct cpufreq_policy *policy, unsigned int freq) if (!per_cpu(cpu_is_managed, policy->cpu)) goto err; - per_cpu(cpu_set_freq, policy->cpu) = freq; - - if (freq < per_cpu(cpu_min_freq, policy->cpu)) - freq = per_cpu(cpu_min_freq, policy->cpu); - if (freq > per_cpu(cpu_max_freq, policy->cpu)) - freq = per_cpu(cpu_max_freq, policy->cpu); - /* * We're safe from concurrent calls to ->target() here * as we hold the userspace_mutex lock. If we were calling @@ -104,10 +55,9 @@ static int cpufreq_set(struct cpufreq_policy *policy, unsigned int freq) return ret; } - static ssize_t show_speed(struct cpufreq_policy *policy, char *buf) { - return sprintf(buf, "%u\n", per_cpu(cpu_cur_freq, policy->cpu)); + return sprintf(buf, "%u\n", policy->cur); } static int cpufreq_governor_userspace(struct cpufreq_policy *policy, @@ -119,73 +69,37 @@ static int cpufreq_governor_userspace(struct cpufreq_policy *policy, switch (event) { case CPUFREQ_GOV_START: BUG_ON(!policy->cur); - mutex_lock(&userspace_mutex); - - if (cpus_using_userspace_governor == 0) { - cpufreq_register_notifier( - &userspace_cpufreq_notifier_block, - CPUFREQ_TRANSITION_NOTIFIER); - } - cpus_using_userspace_governor++; + pr_debug("started managing cpu %u\n", cpu); + mutex_lock(&userspace_mutex); per_cpu(cpu_is_managed, cpu) = 1; - per_cpu(cpu_min_freq, cpu) = policy->min; - per_cpu(cpu_max_freq, cpu) = policy->max; - per_cpu(cpu_cur_freq, cpu) = policy->cur; - per_cpu(cpu_set_freq, cpu) = policy->cur; - pr_debug("managing cpu %u started " - "(%u - %u kHz, currently %u kHz)\n", - cpu, - per_cpu(cpu_min_freq, cpu), - per_cpu(cpu_max_freq, cpu), - per_cpu(cpu_cur_freq, cpu)); - mutex_unlock(&userspace_mutex); break; case CPUFREQ_GOV_STOP: - mutex_lock(&userspace_mutex); - cpus_using_userspace_governor--; - if (cpus_using_userspace_governor == 0) { - cpufreq_unregister_notifier( - &userspace_cpufreq_notifier_block, - CPUFREQ_TRANSITION_NOTIFIER); - } + pr_debug("managing cpu %u stopped\n", cpu); + mutex_lock(&userspace_mutex); per_cpu(cpu_is_managed, cpu) = 0; - per_cpu(cpu_min_freq, cpu) = 0; - per_cpu(cpu_max_freq, cpu) = 0; - per_cpu(cpu_set_freq, cpu) = 0; - pr_debug("managing cpu %u stopped\n", cpu); mutex_unlock(&userspace_mutex); break; case CPUFREQ_GOV_LIMITS: mutex_lock(&userspace_mutex); - pr_debug("limit event for cpu %u: %u - %u kHz, " - "currently %u kHz, last set to %u kHz\n", + pr_debug("limit event for cpu %u: %u - %u kHz, currently %u kHz\n", cpu, policy->min, policy->max, - per_cpu(cpu_cur_freq, cpu), - per_cpu(cpu_set_freq, cpu)); - if (policy->max < per_cpu(cpu_set_freq, cpu)) { + policy->cur); + + if (policy->max < policy->cur) __cpufreq_driver_target(policy, policy->max, CPUFREQ_RELATION_H); - } else if (policy->min > per_cpu(cpu_set_freq, cpu)) { + else if (policy->min > policy->cur) __cpufreq_driver_target(policy, policy->min, CPUFREQ_RELATION_L); - } else { - __cpufreq_driver_target(policy, - per_cpu(cpu_set_freq, cpu), - CPUFREQ_RELATION_L); - } - per_cpu(cpu_min_freq, cpu) = policy->min; - per_cpu(cpu_max_freq, cpu) = policy->max; - per_cpu(cpu_cur_freq, cpu) = policy->cur; mutex_unlock(&userspace_mutex); break; } return rc; } - #ifndef CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE static #endif @@ -202,13 +116,11 @@ static int __init cpufreq_gov_userspace_init(void) return cpufreq_register_governor(&cpufreq_gov_userspace); } - static void __exit cpufreq_gov_userspace_exit(void) { cpufreq_unregister_governor(&cpufreq_gov_userspace); } - MODULE_AUTHOR("Dominik Brodowski <linux@brodo.de>, " "Russell King <rmk@arm.linux.org.uk>"); MODULE_DESCRIPTION("CPUfreq policy governor 'userspace'"); diff --git a/drivers/cpufreq/davinci-cpufreq.c b/drivers/cpufreq/davinci-cpufreq.c index c33c76c360fa..551dd655c6f2 100644 --- a/drivers/cpufreq/davinci-cpufreq.c +++ b/drivers/cpufreq/davinci-cpufreq.c @@ -114,6 +114,9 @@ static int davinci_target(struct cpufreq_policy *policy, pdata->set_voltage(idx); out: + if (ret) + freqs.new = freqs.old; + cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE); return ret; diff --git a/drivers/cpufreq/dbx500-cpufreq.c b/drivers/cpufreq/dbx500-cpufreq.c index 6ec6539ae041..1fdb02b9f1ec 100644 --- a/drivers/cpufreq/dbx500-cpufreq.c +++ b/drivers/cpufreq/dbx500-cpufreq.c @@ -57,13 +57,13 @@ static int dbx500_cpufreq_target(struct cpufreq_policy *policy, if (ret) { pr_err("dbx500-cpufreq: Failed to set armss_clk to %d Hz: error %d\n", freqs.new * 1000, ret); - return ret; + freqs.new = freqs.old; } /* post change notification */ cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE); - return 0; + return ret; } static unsigned int dbx500_cpufreq_getspeed(unsigned int cpu) diff --git a/drivers/cpufreq/e_powersaver.c b/drivers/cpufreq/e_powersaver.c index 37380fb92621..a60efaeb4cf8 100644 --- a/drivers/cpufreq/e_powersaver.c +++ b/drivers/cpufreq/e_powersaver.c @@ -161,6 +161,9 @@ postchange: current_multiplier); } #endif + if (err) + freqs.new = freqs.old; + cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE); return err; } @@ -188,7 +191,7 @@ static int eps_target(struct cpufreq_policy *policy, } /* Make frequency transition */ - dest_state = centaur->freq_table[newstate].index & 0xffff; + dest_state = centaur->freq_table[newstate].driver_data & 0xffff; ret = eps_set_state(centaur, policy, dest_state); if (ret) printk(KERN_ERR "eps: Timeout!\n"); @@ -380,9 +383,9 @@ static int eps_cpu_init(struct cpufreq_policy *policy) f_table = ¢aur->freq_table[0]; if (brand != EPS_BRAND_C7M) { f_table[0].frequency = fsb * min_multiplier; - f_table[0].index = (min_multiplier << 8) | min_voltage; + f_table[0].driver_data = (min_multiplier << 8) | min_voltage; f_table[1].frequency = fsb * max_multiplier; - f_table[1].index = (max_multiplier << 8) | max_voltage; + f_table[1].driver_data = (max_multiplier << 8) | max_voltage; f_table[2].frequency = CPUFREQ_TABLE_END; } else { k = 0; @@ -391,7 +394,7 @@ static int eps_cpu_init(struct cpufreq_policy *policy) for (i = min_multiplier; i <= max_multiplier; i++) { voltage = (k * step) / 256 + min_voltage; f_table[k].frequency = fsb * i; - f_table[k].index = (i << 8) | voltage; + f_table[k].driver_data = (i << 8) | voltage; k++; } f_table[k].frequency = CPUFREQ_TABLE_END; diff --git a/drivers/cpufreq/exynos-cpufreq.c b/drivers/cpufreq/exynos-cpufreq.c index 475b4f607f0d..0d32f02ef4d6 100644 --- a/drivers/cpufreq/exynos-cpufreq.c +++ b/drivers/cpufreq/exynos-cpufreq.c @@ -113,7 +113,8 @@ static int exynos_cpufreq_scale(unsigned int target_freq) if (ret) { pr_err("%s: failed to set cpu voltage to %d\n", __func__, arm_volt); - goto out; + freqs.new = freqs.old; + goto post_notify; } } @@ -123,14 +124,19 @@ static int exynos_cpufreq_scale(unsigned int target_freq) if (ret) { pr_err("%s: failed to set cpu voltage to %d\n", __func__, safe_arm_volt); - goto out; + freqs.new = freqs.old; + goto post_notify; } } exynos_info->set_freq(old_index, index); +post_notify: cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE); + if (ret) + goto out; + /* When the new frequency is lower than current frequency */ if ((freqs.new < freqs.old) || ((freqs.new > freqs.old) && safe_arm_volt)) { diff --git a/drivers/cpufreq/freq_table.c b/drivers/cpufreq/freq_table.c index d7a79662e24c..f0d87412cc91 100644 --- a/drivers/cpufreq/freq_table.c +++ b/drivers/cpufreq/freq_table.c @@ -34,8 +34,8 @@ int cpufreq_frequency_table_cpuinfo(struct cpufreq_policy *policy, continue; } - pr_debug("table entry %u: %u kHz, %u index\n", - i, freq, table[i].index); + pr_debug("table entry %u: %u kHz, %u driver_data\n", + i, freq, table[i].driver_data); if (freq < min_freq) min_freq = freq; if (freq > max_freq) @@ -97,11 +97,11 @@ int cpufreq_frequency_table_target(struct cpufreq_policy *policy, unsigned int *index) { struct cpufreq_frequency_table optimal = { - .index = ~0, + .driver_data = ~0, .frequency = 0, }; struct cpufreq_frequency_table suboptimal = { - .index = ~0, + .driver_data = ~0, .frequency = 0, }; unsigned int i; @@ -129,12 +129,12 @@ int cpufreq_frequency_table_target(struct cpufreq_policy *policy, if (freq <= target_freq) { if (freq >= optimal.frequency) { optimal.frequency = freq; - optimal.index = i; + optimal.driver_data = i; } } else { if (freq <= suboptimal.frequency) { suboptimal.frequency = freq; - suboptimal.index = i; + suboptimal.driver_data = i; } } break; @@ -142,26 +142,26 @@ int cpufreq_frequency_table_target(struct cpufreq_policy *policy, if (freq >= target_freq) { if (freq <= optimal.frequency) { optimal.frequency = freq; - optimal.index = i; + optimal.driver_data = i; } } else { if (freq >= suboptimal.frequency) { suboptimal.frequency = freq; - suboptimal.index = i; + suboptimal.driver_data = i; } } break; } } - if (optimal.index > i) { - if (suboptimal.index > i) + if (optimal.driver_data > i) { + if (suboptimal.driver_data > i) return -EINVAL; - *index = suboptimal.index; + *index = suboptimal.driver_data; } else - *index = optimal.index; + *index = optimal.driver_data; pr_debug("target is %u (%u kHz, %u)\n", *index, table[*index].frequency, - table[*index].index); + table[*index].driver_data); return 0; } diff --git a/drivers/cpufreq/ia64-acpi-cpufreq.c b/drivers/cpufreq/ia64-acpi-cpufreq.c index c0075dbaa633..573c14ea802d 100644 --- a/drivers/cpufreq/ia64-acpi-cpufreq.c +++ b/drivers/cpufreq/ia64-acpi-cpufreq.c @@ -326,7 +326,7 @@ acpi_cpufreq_cpu_init ( /* table init */ for (i = 0; i <= data->acpi_data.state_count; i++) { - data->freq_table[i].index = i; + data->freq_table[i].driver_data = i; if (i < data->acpi_data.state_count) { data->freq_table[i].frequency = data->acpi_data.states[i].core_frequency * 1000; diff --git a/drivers/cpufreq/imx6q-cpufreq.c b/drivers/cpufreq/imx6q-cpufreq.c index b78bc35973ba..e37cdaedbb5b 100644 --- a/drivers/cpufreq/imx6q-cpufreq.c +++ b/drivers/cpufreq/imx6q-cpufreq.c @@ -68,8 +68,6 @@ static int imx6q_set_target(struct cpufreq_policy *policy, if (freqs.old == freqs.new) return 0; - cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE); - rcu_read_lock(); opp = opp_find_freq_ceil(cpu_dev, &freq_hz); if (IS_ERR(opp)) { @@ -86,13 +84,16 @@ static int imx6q_set_target(struct cpufreq_policy *policy, freqs.old / 1000, volt_old / 1000, freqs.new / 1000, volt / 1000); + cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE); + /* scaling up? scale voltage before frequency */ if (freqs.new > freqs.old) { ret = regulator_set_voltage_tol(arm_reg, volt, 0); if (ret) { dev_err(cpu_dev, "failed to scale vddarm up: %d\n", ret); - return ret; + freqs.new = freqs.old; + goto post_notify; } /* @@ -145,15 +146,18 @@ static int imx6q_set_target(struct cpufreq_policy *policy, if (ret) { dev_err(cpu_dev, "failed to set clock rate: %d\n", ret); regulator_set_voltage_tol(arm_reg, volt_old, 0); - return ret; + freqs.new = freqs.old; + goto post_notify; } /* scaling down? scale voltage after frequency */ if (freqs.new < freqs.old) { ret = regulator_set_voltage_tol(arm_reg, volt, 0); - if (ret) + if (ret) { dev_warn(cpu_dev, "failed to scale vddarm down: %d\n", ret); + ret = 0; + } if (freqs.old == FREQ_1P2_GHZ / 1000) { regulator_set_voltage_tol(pu_reg, @@ -163,9 +167,10 @@ static int imx6q_set_target(struct cpufreq_policy *policy, } } +post_notify: cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE); - return 0; + return ret; } static int imx6q_cpufreq_init(struct cpufreq_policy *policy) diff --git a/drivers/cpufreq/kirkwood-cpufreq.c b/drivers/cpufreq/kirkwood-cpufreq.c index b2644af985ec..c233ea617366 100644 --- a/drivers/cpufreq/kirkwood-cpufreq.c +++ b/drivers/cpufreq/kirkwood-cpufreq.c @@ -59,7 +59,7 @@ static void kirkwood_cpufreq_set_cpu_state(struct cpufreq_policy *policy, unsigned int index) { struct cpufreq_freqs freqs; - unsigned int state = kirkwood_freq_table[index].index; + unsigned int state = kirkwood_freq_table[index].driver_data; unsigned long reg; freqs.old = kirkwood_cpufreq_get_cpu_frequency(0); diff --git a/drivers/cpufreq/longhaul.c b/drivers/cpufreq/longhaul.c index b448638e34de..b6a0a7a406b0 100644 --- a/drivers/cpufreq/longhaul.c +++ b/drivers/cpufreq/longhaul.c @@ -254,7 +254,7 @@ static void longhaul_setstate(struct cpufreq_policy *policy, u32 bm_timeout = 1000; unsigned int dir = 0; - mults_index = longhaul_table[table_index].index; + mults_index = longhaul_table[table_index].driver_data; /* Safety precautions */ mult = mults[mults_index & 0x1f]; if (mult == -1) @@ -487,7 +487,7 @@ static int __cpuinit longhaul_get_ranges(void) if (ratio > maxmult || ratio < minmult) continue; longhaul_table[k].frequency = calc_speed(ratio); - longhaul_table[k].index = j; + longhaul_table[k].driver_data = j; k++; } if (k <= 1) { @@ -508,8 +508,8 @@ static int __cpuinit longhaul_get_ranges(void) if (min_i != j) { swap(longhaul_table[j].frequency, longhaul_table[min_i].frequency); - swap(longhaul_table[j].index, - longhaul_table[min_i].index); + swap(longhaul_table[j].driver_data, + longhaul_table[min_i].driver_data); } } @@ -517,7 +517,7 @@ static int __cpuinit longhaul_get_ranges(void) /* Find index we are running on */ for (j = 0; j < k; j++) { - if (mults[longhaul_table[j].index & 0x1f] == mult) { + if (mults[longhaul_table[j].driver_data & 0x1f] == mult) { longhaul_index = j; break; } @@ -613,7 +613,7 @@ static void __cpuinit longhaul_setup_voltagescaling(void) pos = (speed - min_vid_speed) / kHz_step + minvid.pos; else pos = minvid.pos; - longhaul_table[j].index |= mV_vrm_table[pos] << 8; + longhaul_table[j].driver_data |= mV_vrm_table[pos] << 8; vid = vrm_mV_table[mV_vrm_table[pos]]; printk(KERN_INFO PFX "f: %d kHz, index: %d, vid: %d mV\n", speed, j, vid.mV); @@ -656,12 +656,12 @@ static int longhaul_target(struct cpufreq_policy *policy, * this in hardware, C3 is old and we need to do this * in software. */ i = longhaul_index; - current_vid = (longhaul_table[longhaul_index].index >> 8); + current_vid = (longhaul_table[longhaul_index].driver_data >> 8); current_vid &= 0x1f; if (table_index > longhaul_index) dir = 1; while (i != table_index) { - vid = (longhaul_table[i].index >> 8) & 0x1f; + vid = (longhaul_table[i].driver_data >> 8) & 0x1f; if (vid != current_vid) { longhaul_setstate(policy, i); current_vid = vid; diff --git a/drivers/cpufreq/loongson2_cpufreq.c b/drivers/cpufreq/loongson2_cpufreq.c index d53912768946..bb838b985077 100644 --- a/drivers/cpufreq/loongson2_cpufreq.c +++ b/drivers/cpufreq/loongson2_cpufreq.c @@ -72,7 +72,7 @@ static int loongson2_cpufreq_target(struct cpufreq_policy *policy, freq = ((cpu_clock_freq / 1000) * - loongson2_clockmod_table[newstate].index) / 8; + loongson2_clockmod_table[newstate].driver_data) / 8; if (freq < policy->min || freq > policy->max) return -EINVAL; diff --git a/drivers/cpufreq/omap-cpufreq.c b/drivers/cpufreq/omap-cpufreq.c index 0279d18a57f9..29468a522ee9 100644 --- a/drivers/cpufreq/omap-cpufreq.c +++ b/drivers/cpufreq/omap-cpufreq.c @@ -93,9 +93,6 @@ static int omap_target(struct cpufreq_policy *policy, if (freqs.old == freqs.new && policy->cur == freqs.new) return ret; - /* notifiers */ - cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE); - freq = freqs.new * 1000; ret = clk_round_rate(mpu_clk, freq); if (IS_ERR_VALUE(ret)) { @@ -125,6 +122,9 @@ static int omap_target(struct cpufreq_policy *policy, freqs.old / 1000, volt_old ? volt_old / 1000 : -1, freqs.new / 1000, volt ? volt / 1000 : -1); + /* notifiers */ + cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE); + /* scaling up? scale voltage before frequency */ if (mpu_reg && (freqs.new > freqs.old)) { r = regulator_set_voltage(mpu_reg, volt - tol, volt + tol); diff --git a/drivers/cpufreq/p4-clockmod.c b/drivers/cpufreq/p4-clockmod.c index 421ef37d0bb3..9ee78170ff86 100644 --- a/drivers/cpufreq/p4-clockmod.c +++ b/drivers/cpufreq/p4-clockmod.c @@ -118,7 +118,7 @@ static int cpufreq_p4_target(struct cpufreq_policy *policy, return -EINVAL; freqs.old = cpufreq_p4_get(policy->cpu); - freqs.new = stock_freq * p4clockmod_table[newstate].index / 8; + freqs.new = stock_freq * p4clockmod_table[newstate].driver_data / 8; if (freqs.new == freqs.old) return 0; @@ -131,7 +131,7 @@ static int cpufreq_p4_target(struct cpufreq_policy *policy, * Developer's Manual, Volume 3 */ for_each_cpu(i, policy->cpus) - cpufreq_p4_setdc(i, p4clockmod_table[newstate].index); + cpufreq_p4_setdc(i, p4clockmod_table[newstate].driver_data); /* notifiers */ cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE); diff --git a/drivers/cpufreq/pasemi-cpufreq.c b/drivers/cpufreq/pasemi-cpufreq.c new file mode 100644 index 000000000000..b704da404067 --- /dev/null +++ b/drivers/cpufreq/pasemi-cpufreq.c @@ -0,0 +1,331 @@ +/* + * Copyright (C) 2007 PA Semi, Inc + * + * Authors: Egor Martovetsky <egor@pasemi.com> + * Olof Johansson <olof@lixom.net> + * + * Maintained by: Olof Johansson <olof@lixom.net> + * + * Based on arch/powerpc/platforms/cell/cbe_cpufreq.c: + * (C) Copyright IBM Deutschland Entwicklung GmbH 2005 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + */ + +#include <linux/cpufreq.h> +#include <linux/timer.h> +#include <linux/module.h> + +#include <asm/hw_irq.h> +#include <asm/io.h> +#include <asm/prom.h> +#include <asm/time.h> +#include <asm/smp.h> + +#define SDCASR_REG 0x0100 +#define SDCASR_REG_STRIDE 0x1000 +#define SDCPWR_CFGA0_REG 0x0100 +#define SDCPWR_PWST0_REG 0x0000 +#define SDCPWR_GIZTIME_REG 0x0440 + +/* SDCPWR_GIZTIME_REG fields */ +#define SDCPWR_GIZTIME_GR 0x80000000 +#define SDCPWR_GIZTIME_LONGLOCK 0x000000ff + +/* Offset of ASR registers from SDC base */ +#define SDCASR_OFFSET 0x120000 + +static void __iomem *sdcpwr_mapbase; +static void __iomem *sdcasr_mapbase; + +static DEFINE_MUTEX(pas_switch_mutex); + +/* Current astate, is used when waking up from power savings on + * one core, in case the other core has switched states during + * the idle time. + */ +static int current_astate; + +/* We support 5(A0-A4) power states excluding turbo(A5-A6) modes */ +static struct cpufreq_frequency_table pas_freqs[] = { + {0, 0}, + {1, 0}, + {2, 0}, + {3, 0}, + {4, 0}, + {0, CPUFREQ_TABLE_END}, +}; + +static struct freq_attr *pas_cpu_freqs_attr[] = { + &cpufreq_freq_attr_scaling_available_freqs, + NULL, +}; + +/* + * hardware specific functions + */ + +static int get_astate_freq(int astate) +{ + u32 ret; + ret = in_le32(sdcpwr_mapbase + SDCPWR_CFGA0_REG + (astate * 0x10)); + + return ret & 0x3f; +} + +static int get_cur_astate(int cpu) +{ + u32 ret; + + ret = in_le32(sdcpwr_mapbase + SDCPWR_PWST0_REG); + ret = (ret >> (cpu * 4)) & 0x7; + + return ret; +} + +static int get_gizmo_latency(void) +{ + u32 giztime, ret; + + giztime = in_le32(sdcpwr_mapbase + SDCPWR_GIZTIME_REG); + + /* just provide the upper bound */ + if (giztime & SDCPWR_GIZTIME_GR) + ret = (giztime & SDCPWR_GIZTIME_LONGLOCK) * 128000; + else + ret = (giztime & SDCPWR_GIZTIME_LONGLOCK) * 1000; + + return ret; +} + +static void set_astate(int cpu, unsigned int astate) +{ + unsigned long flags; + + /* Return if called before init has run */ + if (unlikely(!sdcasr_mapbase)) + return; + + local_irq_save(flags); + + out_le32(sdcasr_mapbase + SDCASR_REG + SDCASR_REG_STRIDE*cpu, astate); + + local_irq_restore(flags); +} + +int check_astate(void) +{ + return get_cur_astate(hard_smp_processor_id()); +} + +void restore_astate(int cpu) +{ + set_astate(cpu, current_astate); +} + +/* + * cpufreq functions + */ + +static int pas_cpufreq_cpu_init(struct cpufreq_policy *policy) +{ + const u32 *max_freqp; + u32 max_freq; + int i, cur_astate; + struct resource res; + struct device_node *cpu, *dn; + int err = -ENODEV; + + cpu = of_get_cpu_node(policy->cpu, NULL); + + if (!cpu) + goto out; + + dn = of_find_compatible_node(NULL, NULL, "1682m-sdc"); + if (!dn) + dn = of_find_compatible_node(NULL, NULL, + "pasemi,pwrficient-sdc"); + if (!dn) + goto out; + err = of_address_to_resource(dn, 0, &res); + of_node_put(dn); + if (err) + goto out; + sdcasr_mapbase = ioremap(res.start + SDCASR_OFFSET, 0x2000); + if (!sdcasr_mapbase) { + err = -EINVAL; + goto out; + } + + dn = of_find_compatible_node(NULL, NULL, "1682m-gizmo"); + if (!dn) + dn = of_find_compatible_node(NULL, NULL, + "pasemi,pwrficient-gizmo"); + if (!dn) { + err = -ENODEV; + goto out_unmap_sdcasr; + } + err = of_address_to_resource(dn, 0, &res); + of_node_put(dn); + if (err) + goto out_unmap_sdcasr; + sdcpwr_mapbase = ioremap(res.start, 0x1000); + if (!sdcpwr_mapbase) { + err = -EINVAL; + goto out_unmap_sdcasr; + } + + pr_debug("init cpufreq on CPU %d\n", policy->cpu); + + max_freqp = of_get_property(cpu, "clock-frequency", NULL); + if (!max_freqp) { + err = -EINVAL; + goto out_unmap_sdcpwr; + } + + /* we need the freq in kHz */ + max_freq = *max_freqp / 1000; + + pr_debug("max clock-frequency is at %u kHz\n", max_freq); + pr_debug("initializing frequency table\n"); + + /* initialize frequency table */ + for (i=0; pas_freqs[i].frequency!=CPUFREQ_TABLE_END; i++) { + pas_freqs[i].frequency = + get_astate_freq(pas_freqs[i].driver_data) * 100000; + pr_debug("%d: %d\n", i, pas_freqs[i].frequency); + } + + policy->cpuinfo.transition_latency = get_gizmo_latency(); + + cur_astate = get_cur_astate(policy->cpu); + pr_debug("current astate is at %d\n",cur_astate); + + policy->cur = pas_freqs[cur_astate].frequency; + cpumask_copy(policy->cpus, cpu_online_mask); + + ppc_proc_freq = policy->cur * 1000ul; + + cpufreq_frequency_table_get_attr(pas_freqs, policy->cpu); + + /* this ensures that policy->cpuinfo_min and policy->cpuinfo_max + * are set correctly + */ + return cpufreq_frequency_table_cpuinfo(policy, pas_freqs); + +out_unmap_sdcpwr: + iounmap(sdcpwr_mapbase); + +out_unmap_sdcasr: + iounmap(sdcasr_mapbase); +out: + return err; +} + +static int pas_cpufreq_cpu_exit(struct cpufreq_policy *policy) +{ + /* + * We don't support CPU hotplug. Don't unmap after the system + * has already made it to a running state. + */ + if (system_state != SYSTEM_BOOTING) + return 0; + + if (sdcasr_mapbase) + iounmap(sdcasr_mapbase); + if (sdcpwr_mapbase) + iounmap(sdcpwr_mapbase); + + cpufreq_frequency_table_put_attr(policy->cpu); + return 0; +} + +static int pas_cpufreq_verify(struct cpufreq_policy *policy) +{ + return cpufreq_frequency_table_verify(policy, pas_freqs); +} + +static int pas_cpufreq_target(struct cpufreq_policy *policy, + unsigned int target_freq, + unsigned int relation) +{ + struct cpufreq_freqs freqs; + int pas_astate_new; + int i; + + cpufreq_frequency_table_target(policy, + pas_freqs, + target_freq, + relation, + &pas_astate_new); + + freqs.old = policy->cur; + freqs.new = pas_freqs[pas_astate_new].frequency; + + mutex_lock(&pas_switch_mutex); + cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE); + + pr_debug("setting frequency for cpu %d to %d kHz, 1/%d of max frequency\n", + policy->cpu, + pas_freqs[pas_astate_new].frequency, + pas_freqs[pas_astate_new].driver_data); + + current_astate = pas_astate_new; + + for_each_online_cpu(i) + set_astate(i, pas_astate_new); + + cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE); + mutex_unlock(&pas_switch_mutex); + + ppc_proc_freq = freqs.new * 1000ul; + return 0; +} + +static struct cpufreq_driver pas_cpufreq_driver = { + .name = "pas-cpufreq", + .owner = THIS_MODULE, + .flags = CPUFREQ_CONST_LOOPS, + .init = pas_cpufreq_cpu_init, + .exit = pas_cpufreq_cpu_exit, + .verify = pas_cpufreq_verify, + .target = pas_cpufreq_target, + .attr = pas_cpu_freqs_attr, +}; + +/* + * module init and destoy + */ + +static int __init pas_cpufreq_init(void) +{ + if (!of_machine_is_compatible("PA6T-1682M") && + !of_machine_is_compatible("pasemi,pwrficient")) + return -ENODEV; + + return cpufreq_register_driver(&pas_cpufreq_driver); +} + +static void __exit pas_cpufreq_exit(void) +{ + cpufreq_unregister_driver(&pas_cpufreq_driver); +} + +module_init(pas_cpufreq_init); +module_exit(pas_cpufreq_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Egor Martovetsky <egor@pasemi.com>, Olof Johansson <olof@lixom.net>"); diff --git a/drivers/cpufreq/pcc-cpufreq.c b/drivers/cpufreq/pcc-cpufreq.c index 0de00081a81e..1581fcc4cf4a 100644 --- a/drivers/cpufreq/pcc-cpufreq.c +++ b/drivers/cpufreq/pcc-cpufreq.c @@ -243,6 +243,8 @@ static int pcc_cpufreq_target(struct cpufreq_policy *policy, return 0; cmd_incomplete: + freqs.new = freqs.old; + cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE); iowrite16(0, &pcch_hdr->status); spin_unlock(&pcc_lock); return -EINVAL; diff --git a/drivers/cpufreq/pmac32-cpufreq.c b/drivers/cpufreq/pmac32-cpufreq.c new file mode 100644 index 000000000000..3104fad82480 --- /dev/null +++ b/drivers/cpufreq/pmac32-cpufreq.c @@ -0,0 +1,721 @@ +/* + * Copyright (C) 2002 - 2005 Benjamin Herrenschmidt <benh@kernel.crashing.org> + * Copyright (C) 2004 John Steele Scott <toojays@toojays.net> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * TODO: Need a big cleanup here. Basically, we need to have different + * cpufreq_driver structures for the different type of HW instead of the + * current mess. We also need to better deal with the detection of the + * type of machine. + * + */ + +#include <linux/module.h> +#include <linux/types.h> +#include <linux/errno.h> +#include <linux/kernel.h> +#include <linux/delay.h> +#include <linux/sched.h> +#include <linux/adb.h> +#include <linux/pmu.h> +#include <linux/cpufreq.h> +#include <linux/init.h> +#include <linux/device.h> +#include <linux/hardirq.h> +#include <asm/prom.h> +#include <asm/machdep.h> +#include <asm/irq.h> +#include <asm/pmac_feature.h> +#include <asm/mmu_context.h> +#include <asm/sections.h> +#include <asm/cputable.h> +#include <asm/time.h> +#include <asm/mpic.h> +#include <asm/keylargo.h> +#include <asm/switch_to.h> + +/* WARNING !!! This will cause calibrate_delay() to be called, + * but this is an __init function ! So you MUST go edit + * init/main.c to make it non-init before enabling DEBUG_FREQ + */ +#undef DEBUG_FREQ + +extern void low_choose_7447a_dfs(int dfs); +extern void low_choose_750fx_pll(int pll); +extern void low_sleep_handler(void); + +/* + * Currently, PowerMac cpufreq supports only high & low frequencies + * that are set by the firmware + */ +static unsigned int low_freq; +static unsigned int hi_freq; +static unsigned int cur_freq; +static unsigned int sleep_freq; +static unsigned long transition_latency; + +/* + * Different models uses different mechanisms to switch the frequency + */ +static int (*set_speed_proc)(int low_speed); +static unsigned int (*get_speed_proc)(void); + +/* + * Some definitions used by the various speedprocs + */ +static u32 voltage_gpio; +static u32 frequency_gpio; +static u32 slew_done_gpio; +static int no_schedule; +static int has_cpu_l2lve; +static int is_pmu_based; + +/* There are only two frequency states for each processor. Values + * are in kHz for the time being. + */ +#define CPUFREQ_HIGH 0 +#define CPUFREQ_LOW 1 + +static struct cpufreq_frequency_table pmac_cpu_freqs[] = { + {CPUFREQ_HIGH, 0}, + {CPUFREQ_LOW, 0}, + {0, CPUFREQ_TABLE_END}, +}; + +static struct freq_attr* pmac_cpu_freqs_attr[] = { + &cpufreq_freq_attr_scaling_available_freqs, + NULL, +}; + +static inline void local_delay(unsigned long ms) +{ + if (no_schedule) + mdelay(ms); + else + msleep(ms); +} + +#ifdef DEBUG_FREQ +static inline void debug_calc_bogomips(void) +{ + /* This will cause a recalc of bogomips and display the + * result. We backup/restore the value to avoid affecting the + * core cpufreq framework's own calculation. + */ + unsigned long save_lpj = loops_per_jiffy; + calibrate_delay(); + loops_per_jiffy = save_lpj; +} +#endif /* DEBUG_FREQ */ + +/* Switch CPU speed under 750FX CPU control + */ +static int cpu_750fx_cpu_speed(int low_speed) +{ + u32 hid2; + + if (low_speed == 0) { + /* ramping up, set voltage first */ + pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, voltage_gpio, 0x05); + /* Make sure we sleep for at least 1ms */ + local_delay(10); + + /* tweak L2 for high voltage */ + if (has_cpu_l2lve) { + hid2 = mfspr(SPRN_HID2); + hid2 &= ~0x2000; + mtspr(SPRN_HID2, hid2); + } + } +#ifdef CONFIG_6xx + low_choose_750fx_pll(low_speed); +#endif + if (low_speed == 1) { + /* tweak L2 for low voltage */ + if (has_cpu_l2lve) { + hid2 = mfspr(SPRN_HID2); + hid2 |= 0x2000; + mtspr(SPRN_HID2, hid2); + } + + /* ramping down, set voltage last */ + pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, voltage_gpio, 0x04); + local_delay(10); + } + + return 0; +} + +static unsigned int cpu_750fx_get_cpu_speed(void) +{ + if (mfspr(SPRN_HID1) & HID1_PS) + return low_freq; + else + return hi_freq; +} + +/* Switch CPU speed using DFS */ +static int dfs_set_cpu_speed(int low_speed) +{ + if (low_speed == 0) { + /* ramping up, set voltage first */ + pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, voltage_gpio, 0x05); + /* Make sure we sleep for at least 1ms */ + local_delay(1); + } + + /* set frequency */ +#ifdef CONFIG_6xx + low_choose_7447a_dfs(low_speed); +#endif + udelay(100); + + if (low_speed == 1) { + /* ramping down, set voltage last */ + pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, voltage_gpio, 0x04); + local_delay(1); + } + + return 0; +} + +static unsigned int dfs_get_cpu_speed(void) +{ + if (mfspr(SPRN_HID1) & HID1_DFS) + return low_freq; + else + return hi_freq; +} + + +/* Switch CPU speed using slewing GPIOs + */ +static int gpios_set_cpu_speed(int low_speed) +{ + int gpio, timeout = 0; + + /* If ramping up, set voltage first */ + if (low_speed == 0) { + pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, voltage_gpio, 0x05); + /* Delay is way too big but it's ok, we schedule */ + local_delay(10); + } + + /* Set frequency */ + gpio = pmac_call_feature(PMAC_FTR_READ_GPIO, NULL, frequency_gpio, 0); + if (low_speed == ((gpio & 0x01) == 0)) + goto skip; + + pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, frequency_gpio, + low_speed ? 0x04 : 0x05); + udelay(200); + do { + if (++timeout > 100) + break; + local_delay(1); + gpio = pmac_call_feature(PMAC_FTR_READ_GPIO, NULL, slew_done_gpio, 0); + } while((gpio & 0x02) == 0); + skip: + /* If ramping down, set voltage last */ + if (low_speed == 1) { + pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, voltage_gpio, 0x04); + /* Delay is way too big but it's ok, we schedule */ + local_delay(10); + } + +#ifdef DEBUG_FREQ + debug_calc_bogomips(); +#endif + + return 0; +} + +/* Switch CPU speed under PMU control + */ +static int pmu_set_cpu_speed(int low_speed) +{ + struct adb_request req; + unsigned long save_l2cr; + unsigned long save_l3cr; + unsigned int pic_prio; + unsigned long flags; + + preempt_disable(); + +#ifdef DEBUG_FREQ + printk(KERN_DEBUG "HID1, before: %x\n", mfspr(SPRN_HID1)); +#endif + pmu_suspend(); + + /* Disable all interrupt sources on openpic */ + pic_prio = mpic_cpu_get_priority(); + mpic_cpu_set_priority(0xf); + + /* Make sure the decrementer won't interrupt us */ + asm volatile("mtdec %0" : : "r" (0x7fffffff)); + /* Make sure any pending DEC interrupt occurring while we did + * the above didn't re-enable the DEC */ + mb(); + asm volatile("mtdec %0" : : "r" (0x7fffffff)); + + /* We can now disable MSR_EE */ + local_irq_save(flags); + + /* Giveup the FPU & vec */ + enable_kernel_fp(); + +#ifdef CONFIG_ALTIVEC + if (cpu_has_feature(CPU_FTR_ALTIVEC)) + enable_kernel_altivec(); +#endif /* CONFIG_ALTIVEC */ + + /* Save & disable L2 and L3 caches */ + save_l3cr = _get_L3CR(); /* (returns -1 if not available) */ + save_l2cr = _get_L2CR(); /* (returns -1 if not available) */ + + /* Send the new speed command. My assumption is that this command + * will cause PLL_CFG[0..3] to be changed next time CPU goes to sleep + */ + pmu_request(&req, NULL, 6, PMU_CPU_SPEED, 'W', 'O', 'O', 'F', low_speed); + while (!req.complete) + pmu_poll(); + + /* Prepare the northbridge for the speed transition */ + pmac_call_feature(PMAC_FTR_SLEEP_STATE,NULL,1,1); + + /* Call low level code to backup CPU state and recover from + * hardware reset + */ + low_sleep_handler(); + + /* Restore the northbridge */ + pmac_call_feature(PMAC_FTR_SLEEP_STATE,NULL,1,0); + + /* Restore L2 cache */ + if (save_l2cr != 0xffffffff && (save_l2cr & L2CR_L2E) != 0) + _set_L2CR(save_l2cr); + /* Restore L3 cache */ + if (save_l3cr != 0xffffffff && (save_l3cr & L3CR_L3E) != 0) + _set_L3CR(save_l3cr); + + /* Restore userland MMU context */ + switch_mmu_context(NULL, current->active_mm); + +#ifdef DEBUG_FREQ + printk(KERN_DEBUG "HID1, after: %x\n", mfspr(SPRN_HID1)); +#endif + + /* Restore low level PMU operations */ + pmu_unlock(); + + /* + * Restore decrementer; we'll take a decrementer interrupt + * as soon as interrupts are re-enabled and the generic + * clockevents code will reprogram it with the right value. + */ + set_dec(1); + + /* Restore interrupts */ + mpic_cpu_set_priority(pic_prio); + + /* Let interrupts flow again ... */ + local_irq_restore(flags); + +#ifdef DEBUG_FREQ + debug_calc_bogomips(); +#endif + + pmu_resume(); + + preempt_enable(); + + return 0; +} + +static int do_set_cpu_speed(struct cpufreq_policy *policy, int speed_mode, + int notify) +{ + struct cpufreq_freqs freqs; + unsigned long l3cr; + static unsigned long prev_l3cr; + + freqs.old = cur_freq; + freqs.new = (speed_mode == CPUFREQ_HIGH) ? hi_freq : low_freq; + + if (freqs.old == freqs.new) + return 0; + + if (notify) + cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE); + if (speed_mode == CPUFREQ_LOW && + cpu_has_feature(CPU_FTR_L3CR)) { + l3cr = _get_L3CR(); + if (l3cr & L3CR_L3E) { + prev_l3cr = l3cr; + _set_L3CR(0); + } + } + set_speed_proc(speed_mode == CPUFREQ_LOW); + if (speed_mode == CPUFREQ_HIGH && + cpu_has_feature(CPU_FTR_L3CR)) { + l3cr = _get_L3CR(); + if ((prev_l3cr & L3CR_L3E) && l3cr != prev_l3cr) + _set_L3CR(prev_l3cr); + } + if (notify) + cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE); + cur_freq = (speed_mode == CPUFREQ_HIGH) ? hi_freq : low_freq; + + return 0; +} + +static unsigned int pmac_cpufreq_get_speed(unsigned int cpu) +{ + return cur_freq; +} + +static int pmac_cpufreq_verify(struct cpufreq_policy *policy) +{ + return cpufreq_frequency_table_verify(policy, pmac_cpu_freqs); +} + +static int pmac_cpufreq_target( struct cpufreq_policy *policy, + unsigned int target_freq, + unsigned int relation) +{ + unsigned int newstate = 0; + int rc; + + if (cpufreq_frequency_table_target(policy, pmac_cpu_freqs, + target_freq, relation, &newstate)) + return -EINVAL; + + rc = do_set_cpu_speed(policy, newstate, 1); + + ppc_proc_freq = cur_freq * 1000ul; + return rc; +} + +static int pmac_cpufreq_cpu_init(struct cpufreq_policy *policy) +{ + if (policy->cpu != 0) + return -ENODEV; + + policy->cpuinfo.transition_latency = transition_latency; + policy->cur = cur_freq; + + cpufreq_frequency_table_get_attr(pmac_cpu_freqs, policy->cpu); + return cpufreq_frequency_table_cpuinfo(policy, pmac_cpu_freqs); +} + +static u32 read_gpio(struct device_node *np) +{ + const u32 *reg = of_get_property(np, "reg", NULL); + u32 offset; + + if (reg == NULL) + return 0; + /* That works for all keylargos but shall be fixed properly + * some day... The problem is that it seems we can't rely + * on the "reg" property of the GPIO nodes, they are either + * relative to the base of KeyLargo or to the base of the + * GPIO space, and the device-tree doesn't help. + */ + offset = *reg; + if (offset < KEYLARGO_GPIO_LEVELS0) + offset += KEYLARGO_GPIO_LEVELS0; + return offset; +} + +static int pmac_cpufreq_suspend(struct cpufreq_policy *policy) +{ + /* Ok, this could be made a bit smarter, but let's be robust for now. We + * always force a speed change to high speed before sleep, to make sure + * we have appropriate voltage and/or bus speed for the wakeup process, + * and to make sure our loops_per_jiffies are "good enough", that is will + * not cause too short delays if we sleep in low speed and wake in high + * speed.. + */ + no_schedule = 1; + sleep_freq = cur_freq; + if (cur_freq == low_freq && !is_pmu_based) + do_set_cpu_speed(policy, CPUFREQ_HIGH, 0); + return 0; +} + +static int pmac_cpufreq_resume(struct cpufreq_policy *policy) +{ + /* If we resume, first check if we have a get() function */ + if (get_speed_proc) + cur_freq = get_speed_proc(); + else + cur_freq = 0; + + /* We don't, hrm... we don't really know our speed here, best + * is that we force a switch to whatever it was, which is + * probably high speed due to our suspend() routine + */ + do_set_cpu_speed(policy, sleep_freq == low_freq ? + CPUFREQ_LOW : CPUFREQ_HIGH, 0); + + ppc_proc_freq = cur_freq * 1000ul; + + no_schedule = 0; + return 0; +} + +static struct cpufreq_driver pmac_cpufreq_driver = { + .verify = pmac_cpufreq_verify, + .target = pmac_cpufreq_target, + .get = pmac_cpufreq_get_speed, + .init = pmac_cpufreq_cpu_init, + .suspend = pmac_cpufreq_suspend, + .resume = pmac_cpufreq_resume, + .flags = CPUFREQ_PM_NO_WARN, + .attr = pmac_cpu_freqs_attr, + .name = "powermac", + .owner = THIS_MODULE, +}; + + +static int pmac_cpufreq_init_MacRISC3(struct device_node *cpunode) +{ + struct device_node *volt_gpio_np = of_find_node_by_name(NULL, + "voltage-gpio"); + struct device_node *freq_gpio_np = of_find_node_by_name(NULL, + "frequency-gpio"); + struct device_node *slew_done_gpio_np = of_find_node_by_name(NULL, + "slewing-done"); + const u32 *value; + + /* + * Check to see if it's GPIO driven or PMU only + * + * The way we extract the GPIO address is slightly hackish, but it + * works well enough for now. We need to abstract the whole GPIO + * stuff sooner or later anyway + */ + + if (volt_gpio_np) + voltage_gpio = read_gpio(volt_gpio_np); + if (freq_gpio_np) + frequency_gpio = read_gpio(freq_gpio_np); + if (slew_done_gpio_np) + slew_done_gpio = read_gpio(slew_done_gpio_np); + + /* If we use the frequency GPIOs, calculate the min/max speeds based + * on the bus frequencies + */ + if (frequency_gpio && slew_done_gpio) { + int lenp, rc; + const u32 *freqs, *ratio; + + freqs = of_get_property(cpunode, "bus-frequencies", &lenp); + lenp /= sizeof(u32); + if (freqs == NULL || lenp != 2) { + printk(KERN_ERR "cpufreq: bus-frequencies incorrect or missing\n"); + return 1; + } + ratio = of_get_property(cpunode, "processor-to-bus-ratio*2", + NULL); + if (ratio == NULL) { + printk(KERN_ERR "cpufreq: processor-to-bus-ratio*2 missing\n"); + return 1; + } + + /* Get the min/max bus frequencies */ + low_freq = min(freqs[0], freqs[1]); + hi_freq = max(freqs[0], freqs[1]); + + /* Grrrr.. It _seems_ that the device-tree is lying on the low bus + * frequency, it claims it to be around 84Mhz on some models while + * it appears to be approx. 101Mhz on all. Let's hack around here... + * fortunately, we don't need to be too precise + */ + if (low_freq < 98000000) + low_freq = 101000000; + + /* Convert those to CPU core clocks */ + low_freq = (low_freq * (*ratio)) / 2000; + hi_freq = (hi_freq * (*ratio)) / 2000; + + /* Now we get the frequencies, we read the GPIO to see what is out current + * speed + */ + rc = pmac_call_feature(PMAC_FTR_READ_GPIO, NULL, frequency_gpio, 0); + cur_freq = (rc & 0x01) ? hi_freq : low_freq; + + set_speed_proc = gpios_set_cpu_speed; + return 1; + } + + /* If we use the PMU, look for the min & max frequencies in the + * device-tree + */ + value = of_get_property(cpunode, "min-clock-frequency", NULL); + if (!value) + return 1; + low_freq = (*value) / 1000; + /* The PowerBook G4 12" (PowerBook6,1) has an error in the device-tree + * here */ + if (low_freq < 100000) + low_freq *= 10; + + value = of_get_property(cpunode, "max-clock-frequency", NULL); + if (!value) + return 1; + hi_freq = (*value) / 1000; + set_speed_proc = pmu_set_cpu_speed; + is_pmu_based = 1; + + return 0; +} + +static int pmac_cpufreq_init_7447A(struct device_node *cpunode) +{ + struct device_node *volt_gpio_np; + + if (of_get_property(cpunode, "dynamic-power-step", NULL) == NULL) + return 1; + + volt_gpio_np = of_find_node_by_name(NULL, "cpu-vcore-select"); + if (volt_gpio_np) + voltage_gpio = read_gpio(volt_gpio_np); + if (!voltage_gpio){ + printk(KERN_ERR "cpufreq: missing cpu-vcore-select gpio\n"); + return 1; + } + + /* OF only reports the high frequency */ + hi_freq = cur_freq; + low_freq = cur_freq/2; + + /* Read actual frequency from CPU */ + cur_freq = dfs_get_cpu_speed(); + set_speed_proc = dfs_set_cpu_speed; + get_speed_proc = dfs_get_cpu_speed; + + return 0; +} + +static int pmac_cpufreq_init_750FX(struct device_node *cpunode) +{ + struct device_node *volt_gpio_np; + u32 pvr; + const u32 *value; + + if (of_get_property(cpunode, "dynamic-power-step", NULL) == NULL) + return 1; + + hi_freq = cur_freq; + value = of_get_property(cpunode, "reduced-clock-frequency", NULL); + if (!value) + return 1; + low_freq = (*value) / 1000; + + volt_gpio_np = of_find_node_by_name(NULL, "cpu-vcore-select"); + if (volt_gpio_np) + voltage_gpio = read_gpio(volt_gpio_np); + + pvr = mfspr(SPRN_PVR); + has_cpu_l2lve = !((pvr & 0xf00) == 0x100); + + set_speed_proc = cpu_750fx_cpu_speed; + get_speed_proc = cpu_750fx_get_cpu_speed; + cur_freq = cpu_750fx_get_cpu_speed(); + + return 0; +} + +/* Currently, we support the following machines: + * + * - Titanium PowerBook 1Ghz (PMU based, 667Mhz & 1Ghz) + * - Titanium PowerBook 800 (PMU based, 667Mhz & 800Mhz) + * - Titanium PowerBook 400 (PMU based, 300Mhz & 400Mhz) + * - Titanium PowerBook 500 (PMU based, 300Mhz & 500Mhz) + * - iBook2 500/600 (PMU based, 400Mhz & 500/600Mhz) + * - iBook2 700 (CPU based, 400Mhz & 700Mhz, support low voltage) + * - Recent MacRISC3 laptops + * - All new machines with 7447A CPUs + */ +static int __init pmac_cpufreq_setup(void) +{ + struct device_node *cpunode; + const u32 *value; + + if (strstr(cmd_line, "nocpufreq")) + return 0; + + /* Assume only one CPU */ + cpunode = of_find_node_by_type(NULL, "cpu"); + if (!cpunode) + goto out; + + /* Get current cpu clock freq */ + value = of_get_property(cpunode, "clock-frequency", NULL); + if (!value) + goto out; + cur_freq = (*value) / 1000; + transition_latency = CPUFREQ_ETERNAL; + + /* Check for 7447A based MacRISC3 */ + if (of_machine_is_compatible("MacRISC3") && + of_get_property(cpunode, "dynamic-power-step", NULL) && + PVR_VER(mfspr(SPRN_PVR)) == 0x8003) { + pmac_cpufreq_init_7447A(cpunode); + transition_latency = 8000000; + /* Check for other MacRISC3 machines */ + } else if (of_machine_is_compatible("PowerBook3,4") || + of_machine_is_compatible("PowerBook3,5") || + of_machine_is_compatible("MacRISC3")) { + pmac_cpufreq_init_MacRISC3(cpunode); + /* Else check for iBook2 500/600 */ + } else if (of_machine_is_compatible("PowerBook4,1")) { + hi_freq = cur_freq; + low_freq = 400000; + set_speed_proc = pmu_set_cpu_speed; + is_pmu_based = 1; + } + /* Else check for TiPb 550 */ + else if (of_machine_is_compatible("PowerBook3,3") && cur_freq == 550000) { + hi_freq = cur_freq; + low_freq = 500000; + set_speed_proc = pmu_set_cpu_speed; + is_pmu_based = 1; + } + /* Else check for TiPb 400 & 500 */ + else if (of_machine_is_compatible("PowerBook3,2")) { + /* We only know about the 400 MHz and the 500Mhz model + * they both have 300 MHz as low frequency + */ + if (cur_freq < 350000 || cur_freq > 550000) + goto out; + hi_freq = cur_freq; + low_freq = 300000; + set_speed_proc = pmu_set_cpu_speed; + is_pmu_based = 1; + } + /* Else check for 750FX */ + else if (PVR_VER(mfspr(SPRN_PVR)) == 0x7000) + pmac_cpufreq_init_750FX(cpunode); +out: + of_node_put(cpunode); + if (set_speed_proc == NULL) + return -ENODEV; + + pmac_cpu_freqs[CPUFREQ_LOW].frequency = low_freq; + pmac_cpu_freqs[CPUFREQ_HIGH].frequency = hi_freq; + ppc_proc_freq = cur_freq * 1000ul; + + printk(KERN_INFO "Registering PowerMac CPU frequency driver\n"); + printk(KERN_INFO "Low: %d Mhz, High: %d Mhz, Boot: %d Mhz\n", + low_freq/1000, hi_freq/1000, cur_freq/1000); + + return cpufreq_register_driver(&pmac_cpufreq_driver); +} + +module_init(pmac_cpufreq_setup); + diff --git a/drivers/cpufreq/pmac64-cpufreq.c b/drivers/cpufreq/pmac64-cpufreq.c new file mode 100644 index 000000000000..7ba423431cfe --- /dev/null +++ b/drivers/cpufreq/pmac64-cpufreq.c @@ -0,0 +1,746 @@ +/* + * Copyright (C) 2002 - 2005 Benjamin Herrenschmidt <benh@kernel.crashing.org> + * and Markus Demleitner <msdemlei@cl.uni-heidelberg.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This driver adds basic cpufreq support for SMU & 970FX based G5 Macs, + * that is iMac G5 and latest single CPU desktop. + */ + +#undef DEBUG + +#include <linux/module.h> +#include <linux/types.h> +#include <linux/errno.h> +#include <linux/kernel.h> +#include <linux/delay.h> +#include <linux/sched.h> +#include <linux/cpufreq.h> +#include <linux/init.h> +#include <linux/completion.h> +#include <linux/mutex.h> +#include <asm/prom.h> +#include <asm/machdep.h> +#include <asm/irq.h> +#include <asm/sections.h> +#include <asm/cputable.h> +#include <asm/time.h> +#include <asm/smu.h> +#include <asm/pmac_pfunc.h> + +#define DBG(fmt...) pr_debug(fmt) + +/* see 970FX user manual */ + +#define SCOM_PCR 0x0aa001 /* PCR scom addr */ + +#define PCR_HILO_SELECT 0x80000000U /* 1 = PCR, 0 = PCRH */ +#define PCR_SPEED_FULL 0x00000000U /* 1:1 speed value */ +#define PCR_SPEED_HALF 0x00020000U /* 1:2 speed value */ +#define PCR_SPEED_QUARTER 0x00040000U /* 1:4 speed value */ +#define PCR_SPEED_MASK 0x000e0000U /* speed mask */ +#define PCR_SPEED_SHIFT 17 +#define PCR_FREQ_REQ_VALID 0x00010000U /* freq request valid */ +#define PCR_VOLT_REQ_VALID 0x00008000U /* volt request valid */ +#define PCR_TARGET_TIME_MASK 0x00006000U /* target time */ +#define PCR_STATLAT_MASK 0x00001f00U /* STATLAT value */ +#define PCR_SNOOPLAT_MASK 0x000000f0U /* SNOOPLAT value */ +#define PCR_SNOOPACC_MASK 0x0000000fU /* SNOOPACC value */ + +#define SCOM_PSR 0x408001 /* PSR scom addr */ +/* warning: PSR is a 64 bits register */ +#define PSR_CMD_RECEIVED 0x2000000000000000U /* command received */ +#define PSR_CMD_COMPLETED 0x1000000000000000U /* command completed */ +#define PSR_CUR_SPEED_MASK 0x0300000000000000U /* current speed */ +#define PSR_CUR_SPEED_SHIFT (56) + +/* + * The G5 only supports two frequencies (Quarter speed is not supported) + */ +#define CPUFREQ_HIGH 0 +#define CPUFREQ_LOW 1 + +static struct cpufreq_frequency_table g5_cpu_freqs[] = { + {CPUFREQ_HIGH, 0}, + {CPUFREQ_LOW, 0}, + {0, CPUFREQ_TABLE_END}, +}; + +static struct freq_attr* g5_cpu_freqs_attr[] = { + &cpufreq_freq_attr_scaling_available_freqs, + NULL, +}; + +/* Power mode data is an array of the 32 bits PCR values to use for + * the various frequencies, retrieved from the device-tree + */ +static int g5_pmode_cur; + +static void (*g5_switch_volt)(int speed_mode); +static int (*g5_switch_freq)(int speed_mode); +static int (*g5_query_freq)(void); + +static DEFINE_MUTEX(g5_switch_mutex); + +static unsigned long transition_latency; + +#ifdef CONFIG_PMAC_SMU + +static const u32 *g5_pmode_data; +static int g5_pmode_max; + +static struct smu_sdbp_fvt *g5_fvt_table; /* table of op. points */ +static int g5_fvt_count; /* number of op. points */ +static int g5_fvt_cur; /* current op. point */ + +/* + * SMU based voltage switching for Neo2 platforms + */ + +static void g5_smu_switch_volt(int speed_mode) +{ + struct smu_simple_cmd cmd; + + DECLARE_COMPLETION_ONSTACK(comp); + smu_queue_simple(&cmd, SMU_CMD_POWER_COMMAND, 8, smu_done_complete, + &comp, 'V', 'S', 'L', 'E', 'W', + 0xff, g5_fvt_cur+1, speed_mode); + wait_for_completion(&comp); +} + +/* + * Platform function based voltage/vdnap switching for Neo2 + */ + +static struct pmf_function *pfunc_set_vdnap0; +static struct pmf_function *pfunc_vdnap0_complete; + +static void g5_vdnap_switch_volt(int speed_mode) +{ + struct pmf_args args; + u32 slew, done = 0; + unsigned long timeout; + + slew = (speed_mode == CPUFREQ_LOW) ? 1 : 0; + args.count = 1; + args.u[0].p = &slew; + + pmf_call_one(pfunc_set_vdnap0, &args); + + /* It's an irq GPIO so we should be able to just block here, + * I'll do that later after I've properly tested the IRQ code for + * platform functions + */ + timeout = jiffies + HZ/10; + while(!time_after(jiffies, timeout)) { + args.count = 1; + args.u[0].p = &done; + pmf_call_one(pfunc_vdnap0_complete, &args); + if (done) + break; + msleep(1); + } + if (done == 0) + printk(KERN_WARNING "cpufreq: Timeout in clock slewing !\n"); +} + + +/* + * SCOM based frequency switching for 970FX rev3 + */ +static int g5_scom_switch_freq(int speed_mode) +{ + unsigned long flags; + int to; + + /* If frequency is going up, first ramp up the voltage */ + if (speed_mode < g5_pmode_cur) + g5_switch_volt(speed_mode); + + local_irq_save(flags); + + /* Clear PCR high */ + scom970_write(SCOM_PCR, 0); + /* Clear PCR low */ + scom970_write(SCOM_PCR, PCR_HILO_SELECT | 0); + /* Set PCR low */ + scom970_write(SCOM_PCR, PCR_HILO_SELECT | + g5_pmode_data[speed_mode]); + + /* Wait for completion */ + for (to = 0; to < 10; to++) { + unsigned long psr = scom970_read(SCOM_PSR); + + if ((psr & PSR_CMD_RECEIVED) == 0 && + (((psr >> PSR_CUR_SPEED_SHIFT) ^ + (g5_pmode_data[speed_mode] >> PCR_SPEED_SHIFT)) & 0x3) + == 0) + break; + if (psr & PSR_CMD_COMPLETED) + break; + udelay(100); + } + + local_irq_restore(flags); + + /* If frequency is going down, last ramp the voltage */ + if (speed_mode > g5_pmode_cur) + g5_switch_volt(speed_mode); + + g5_pmode_cur = speed_mode; + ppc_proc_freq = g5_cpu_freqs[speed_mode].frequency * 1000ul; + + return 0; +} + +static int g5_scom_query_freq(void) +{ + unsigned long psr = scom970_read(SCOM_PSR); + int i; + + for (i = 0; i <= g5_pmode_max; i++) + if ((((psr >> PSR_CUR_SPEED_SHIFT) ^ + (g5_pmode_data[i] >> PCR_SPEED_SHIFT)) & 0x3) == 0) + break; + return i; +} + +/* + * Fake voltage switching for platforms with missing support + */ + +static void g5_dummy_switch_volt(int speed_mode) +{ +} + +#endif /* CONFIG_PMAC_SMU */ + +/* + * Platform function based voltage switching for PowerMac7,2 & 7,3 + */ + +static struct pmf_function *pfunc_cpu0_volt_high; +static struct pmf_function *pfunc_cpu0_volt_low; +static struct pmf_function *pfunc_cpu1_volt_high; +static struct pmf_function *pfunc_cpu1_volt_low; + +static void g5_pfunc_switch_volt(int speed_mode) +{ + if (speed_mode == CPUFREQ_HIGH) { + if (pfunc_cpu0_volt_high) + pmf_call_one(pfunc_cpu0_volt_high, NULL); + if (pfunc_cpu1_volt_high) + pmf_call_one(pfunc_cpu1_volt_high, NULL); + } else { + if (pfunc_cpu0_volt_low) + pmf_call_one(pfunc_cpu0_volt_low, NULL); + if (pfunc_cpu1_volt_low) + pmf_call_one(pfunc_cpu1_volt_low, NULL); + } + msleep(10); /* should be faster , to fix */ +} + +/* + * Platform function based frequency switching for PowerMac7,2 & 7,3 + */ + +static struct pmf_function *pfunc_cpu_setfreq_high; +static struct pmf_function *pfunc_cpu_setfreq_low; +static struct pmf_function *pfunc_cpu_getfreq; +static struct pmf_function *pfunc_slewing_done; + +static int g5_pfunc_switch_freq(int speed_mode) +{ + struct pmf_args args; + u32 done = 0; + unsigned long timeout; + int rc; + + DBG("g5_pfunc_switch_freq(%d)\n", speed_mode); + + /* If frequency is going up, first ramp up the voltage */ + if (speed_mode < g5_pmode_cur) + g5_switch_volt(speed_mode); + + /* Do it */ + if (speed_mode == CPUFREQ_HIGH) + rc = pmf_call_one(pfunc_cpu_setfreq_high, NULL); + else + rc = pmf_call_one(pfunc_cpu_setfreq_low, NULL); + + if (rc) + printk(KERN_WARNING "cpufreq: pfunc switch error %d\n", rc); + + /* It's an irq GPIO so we should be able to just block here, + * I'll do that later after I've properly tested the IRQ code for + * platform functions + */ + timeout = jiffies + HZ/10; + while(!time_after(jiffies, timeout)) { + args.count = 1; + args.u[0].p = &done; + pmf_call_one(pfunc_slewing_done, &args); + if (done) + break; + msleep(1); + } + if (done == 0) + printk(KERN_WARNING "cpufreq: Timeout in clock slewing !\n"); + + /* If frequency is going down, last ramp the voltage */ + if (speed_mode > g5_pmode_cur) + g5_switch_volt(speed_mode); + + g5_pmode_cur = speed_mode; + ppc_proc_freq = g5_cpu_freqs[speed_mode].frequency * 1000ul; + + return 0; +} + +static int g5_pfunc_query_freq(void) +{ + struct pmf_args args; + u32 val = 0; + + args.count = 1; + args.u[0].p = &val; + pmf_call_one(pfunc_cpu_getfreq, &args); + return val ? CPUFREQ_HIGH : CPUFREQ_LOW; +} + + +/* + * Common interface to the cpufreq core + */ + +static int g5_cpufreq_verify(struct cpufreq_policy *policy) +{ + return cpufreq_frequency_table_verify(policy, g5_cpu_freqs); +} + +static int g5_cpufreq_target(struct cpufreq_policy *policy, + unsigned int target_freq, unsigned int relation) +{ + unsigned int newstate = 0; + struct cpufreq_freqs freqs; + int rc; + + if (cpufreq_frequency_table_target(policy, g5_cpu_freqs, + target_freq, relation, &newstate)) + return -EINVAL; + + if (g5_pmode_cur == newstate) + return 0; + + mutex_lock(&g5_switch_mutex); + + freqs.old = g5_cpu_freqs[g5_pmode_cur].frequency; + freqs.new = g5_cpu_freqs[newstate].frequency; + + cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE); + rc = g5_switch_freq(newstate); + cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE); + + mutex_unlock(&g5_switch_mutex); + + return rc; +} + +static unsigned int g5_cpufreq_get_speed(unsigned int cpu) +{ + return g5_cpu_freqs[g5_pmode_cur].frequency; +} + +static int g5_cpufreq_cpu_init(struct cpufreq_policy *policy) +{ + policy->cpuinfo.transition_latency = transition_latency; + policy->cur = g5_cpu_freqs[g5_query_freq()].frequency; + /* secondary CPUs are tied to the primary one by the + * cpufreq core if in the secondary policy we tell it that + * it actually must be one policy together with all others. */ + cpumask_copy(policy->cpus, cpu_online_mask); + cpufreq_frequency_table_get_attr(g5_cpu_freqs, policy->cpu); + + return cpufreq_frequency_table_cpuinfo(policy, + g5_cpu_freqs); +} + + +static struct cpufreq_driver g5_cpufreq_driver = { + .name = "powermac", + .owner = THIS_MODULE, + .flags = CPUFREQ_CONST_LOOPS, + .init = g5_cpufreq_cpu_init, + .verify = g5_cpufreq_verify, + .target = g5_cpufreq_target, + .get = g5_cpufreq_get_speed, + .attr = g5_cpu_freqs_attr, +}; + + +#ifdef CONFIG_PMAC_SMU + +static int __init g5_neo2_cpufreq_init(struct device_node *cpus) +{ + struct device_node *cpunode; + unsigned int psize, ssize; + unsigned long max_freq; + char *freq_method, *volt_method; + const u32 *valp; + u32 pvr_hi; + int use_volts_vdnap = 0; + int use_volts_smu = 0; + int rc = -ENODEV; + + /* Check supported platforms */ + if (of_machine_is_compatible("PowerMac8,1") || + of_machine_is_compatible("PowerMac8,2") || + of_machine_is_compatible("PowerMac9,1")) + use_volts_smu = 1; + else if (of_machine_is_compatible("PowerMac11,2")) + use_volts_vdnap = 1; + else + return -ENODEV; + + /* Get first CPU node */ + for (cpunode = NULL; + (cpunode = of_get_next_child(cpus, cpunode)) != NULL;) { + const u32 *reg = of_get_property(cpunode, "reg", NULL); + if (reg == NULL || (*reg) != 0) + continue; + if (!strcmp(cpunode->type, "cpu")) + break; + } + if (cpunode == NULL) { + printk(KERN_ERR "cpufreq: Can't find any CPU 0 node\n"); + return -ENODEV; + } + + /* Check 970FX for now */ + valp = of_get_property(cpunode, "cpu-version", NULL); + if (!valp) { + DBG("No cpu-version property !\n"); + goto bail_noprops; + } + pvr_hi = (*valp) >> 16; + if (pvr_hi != 0x3c && pvr_hi != 0x44) { + printk(KERN_ERR "cpufreq: Unsupported CPU version\n"); + goto bail_noprops; + } + + /* Look for the powertune data in the device-tree */ + g5_pmode_data = of_get_property(cpunode, "power-mode-data",&psize); + if (!g5_pmode_data) { + DBG("No power-mode-data !\n"); + goto bail_noprops; + } + g5_pmode_max = psize / sizeof(u32) - 1; + + if (use_volts_smu) { + const struct smu_sdbp_header *shdr; + + /* Look for the FVT table */ + shdr = smu_get_sdb_partition(SMU_SDB_FVT_ID, NULL); + if (!shdr) + goto bail_noprops; + g5_fvt_table = (struct smu_sdbp_fvt *)&shdr[1]; + ssize = (shdr->len * sizeof(u32)) - + sizeof(struct smu_sdbp_header); + g5_fvt_count = ssize / sizeof(struct smu_sdbp_fvt); + g5_fvt_cur = 0; + + /* Sanity checking */ + if (g5_fvt_count < 1 || g5_pmode_max < 1) + goto bail_noprops; + + g5_switch_volt = g5_smu_switch_volt; + volt_method = "SMU"; + } else if (use_volts_vdnap) { + struct device_node *root; + + root = of_find_node_by_path("/"); + if (root == NULL) { + printk(KERN_ERR "cpufreq: Can't find root of " + "device tree\n"); + goto bail_noprops; + } + pfunc_set_vdnap0 = pmf_find_function(root, "set-vdnap0"); + pfunc_vdnap0_complete = + pmf_find_function(root, "slewing-done"); + if (pfunc_set_vdnap0 == NULL || + pfunc_vdnap0_complete == NULL) { + printk(KERN_ERR "cpufreq: Can't find required " + "platform function\n"); + goto bail_noprops; + } + + g5_switch_volt = g5_vdnap_switch_volt; + volt_method = "GPIO"; + } else { + g5_switch_volt = g5_dummy_switch_volt; + volt_method = "none"; + } + + /* + * From what I see, clock-frequency is always the maximal frequency. + * The current driver can not slew sysclk yet, so we really only deal + * with powertune steps for now. We also only implement full freq and + * half freq in this version. So far, I haven't yet seen a machine + * supporting anything else. + */ + valp = of_get_property(cpunode, "clock-frequency", NULL); + if (!valp) + return -ENODEV; + max_freq = (*valp)/1000; + g5_cpu_freqs[0].frequency = max_freq; + g5_cpu_freqs[1].frequency = max_freq/2; + + /* Set callbacks */ + transition_latency = 12000; + g5_switch_freq = g5_scom_switch_freq; + g5_query_freq = g5_scom_query_freq; + freq_method = "SCOM"; + + /* Force apply current frequency to make sure everything is in + * sync (voltage is right for example). Firmware may leave us with + * a strange setting ... + */ + g5_switch_volt(CPUFREQ_HIGH); + msleep(10); + g5_pmode_cur = -1; + g5_switch_freq(g5_query_freq()); + + printk(KERN_INFO "Registering G5 CPU frequency driver\n"); + printk(KERN_INFO "Frequency method: %s, Voltage method: %s\n", + freq_method, volt_method); + printk(KERN_INFO "Low: %d Mhz, High: %d Mhz, Cur: %d MHz\n", + g5_cpu_freqs[1].frequency/1000, + g5_cpu_freqs[0].frequency/1000, + g5_cpu_freqs[g5_pmode_cur].frequency/1000); + + rc = cpufreq_register_driver(&g5_cpufreq_driver); + + /* We keep the CPU node on hold... hopefully, Apple G5 don't have + * hotplug CPU with a dynamic device-tree ... + */ + return rc; + + bail_noprops: + of_node_put(cpunode); + + return rc; +} + +#endif /* CONFIG_PMAC_SMU */ + + +static int __init g5_pm72_cpufreq_init(struct device_node *cpus) +{ + struct device_node *cpuid = NULL, *hwclock = NULL, *cpunode = NULL; + const u8 *eeprom = NULL; + const u32 *valp; + u64 max_freq, min_freq, ih, il; + int has_volt = 1, rc = 0; + + DBG("cpufreq: Initializing for PowerMac7,2, PowerMac7,3 and" + " RackMac3,1...\n"); + + /* Get first CPU node */ + for (cpunode = NULL; + (cpunode = of_get_next_child(cpus, cpunode)) != NULL;) { + if (!strcmp(cpunode->type, "cpu")) + break; + } + if (cpunode == NULL) { + printk(KERN_ERR "cpufreq: Can't find any CPU node\n"); + return -ENODEV; + } + + /* Lookup the cpuid eeprom node */ + cpuid = of_find_node_by_path("/u3@0,f8000000/i2c@f8001000/cpuid@a0"); + if (cpuid != NULL) + eeprom = of_get_property(cpuid, "cpuid", NULL); + if (eeprom == NULL) { + printk(KERN_ERR "cpufreq: Can't find cpuid EEPROM !\n"); + rc = -ENODEV; + goto bail; + } + + /* Lookup the i2c hwclock */ + for (hwclock = NULL; + (hwclock = of_find_node_by_name(hwclock, "i2c-hwclock")) != NULL;){ + const char *loc = of_get_property(hwclock, + "hwctrl-location", NULL); + if (loc == NULL) + continue; + if (strcmp(loc, "CPU CLOCK")) + continue; + if (!of_get_property(hwclock, "platform-get-frequency", NULL)) + continue; + break; + } + if (hwclock == NULL) { + printk(KERN_ERR "cpufreq: Can't find i2c clock chip !\n"); + rc = -ENODEV; + goto bail; + } + + DBG("cpufreq: i2c clock chip found: %s\n", hwclock->full_name); + + /* Now get all the platform functions */ + pfunc_cpu_getfreq = + pmf_find_function(hwclock, "get-frequency"); + pfunc_cpu_setfreq_high = + pmf_find_function(hwclock, "set-frequency-high"); + pfunc_cpu_setfreq_low = + pmf_find_function(hwclock, "set-frequency-low"); + pfunc_slewing_done = + pmf_find_function(hwclock, "slewing-done"); + pfunc_cpu0_volt_high = + pmf_find_function(hwclock, "set-voltage-high-0"); + pfunc_cpu0_volt_low = + pmf_find_function(hwclock, "set-voltage-low-0"); + pfunc_cpu1_volt_high = + pmf_find_function(hwclock, "set-voltage-high-1"); + pfunc_cpu1_volt_low = + pmf_find_function(hwclock, "set-voltage-low-1"); + + /* Check we have minimum requirements */ + if (pfunc_cpu_getfreq == NULL || pfunc_cpu_setfreq_high == NULL || + pfunc_cpu_setfreq_low == NULL || pfunc_slewing_done == NULL) { + printk(KERN_ERR "cpufreq: Can't find platform functions !\n"); + rc = -ENODEV; + goto bail; + } + + /* Check that we have complete sets */ + if (pfunc_cpu0_volt_high == NULL || pfunc_cpu0_volt_low == NULL) { + pmf_put_function(pfunc_cpu0_volt_high); + pmf_put_function(pfunc_cpu0_volt_low); + pfunc_cpu0_volt_high = pfunc_cpu0_volt_low = NULL; + has_volt = 0; + } + if (!has_volt || + pfunc_cpu1_volt_high == NULL || pfunc_cpu1_volt_low == NULL) { + pmf_put_function(pfunc_cpu1_volt_high); + pmf_put_function(pfunc_cpu1_volt_low); + pfunc_cpu1_volt_high = pfunc_cpu1_volt_low = NULL; + } + + /* Note: The device tree also contains a "platform-set-values" + * function for which I haven't quite figured out the usage. It + * might have to be called on init and/or wakeup, I'm not too sure + * but things seem to work fine without it so far ... + */ + + /* Get max frequency from device-tree */ + valp = of_get_property(cpunode, "clock-frequency", NULL); + if (!valp) { + printk(KERN_ERR "cpufreq: Can't find CPU frequency !\n"); + rc = -ENODEV; + goto bail; + } + + max_freq = (*valp)/1000; + + /* Now calculate reduced frequency by using the cpuid input freq + * ratio. This requires 64 bits math unless we are willing to lose + * some precision + */ + ih = *((u32 *)(eeprom + 0x10)); + il = *((u32 *)(eeprom + 0x20)); + + /* Check for machines with no useful settings */ + if (il == ih) { + printk(KERN_WARNING "cpufreq: No low frequency mode available" + " on this model !\n"); + rc = -ENODEV; + goto bail; + } + + min_freq = 0; + if (ih != 0 && il != 0) + min_freq = (max_freq * il) / ih; + + /* Sanity check */ + if (min_freq >= max_freq || min_freq < 1000) { + printk(KERN_ERR "cpufreq: Can't calculate low frequency !\n"); + rc = -ENXIO; + goto bail; + } + g5_cpu_freqs[0].frequency = max_freq; + g5_cpu_freqs[1].frequency = min_freq; + + /* Set callbacks */ + transition_latency = CPUFREQ_ETERNAL; + g5_switch_volt = g5_pfunc_switch_volt; + g5_switch_freq = g5_pfunc_switch_freq; + g5_query_freq = g5_pfunc_query_freq; + + /* Force apply current frequency to make sure everything is in + * sync (voltage is right for example). Firmware may leave us with + * a strange setting ... + */ + g5_switch_volt(CPUFREQ_HIGH); + msleep(10); + g5_pmode_cur = -1; + g5_switch_freq(g5_query_freq()); + + printk(KERN_INFO "Registering G5 CPU frequency driver\n"); + printk(KERN_INFO "Frequency method: i2c/pfunc, " + "Voltage method: %s\n", has_volt ? "i2c/pfunc" : "none"); + printk(KERN_INFO "Low: %d Mhz, High: %d Mhz, Cur: %d MHz\n", + g5_cpu_freqs[1].frequency/1000, + g5_cpu_freqs[0].frequency/1000, + g5_cpu_freqs[g5_pmode_cur].frequency/1000); + + rc = cpufreq_register_driver(&g5_cpufreq_driver); + bail: + if (rc != 0) { + pmf_put_function(pfunc_cpu_getfreq); + pmf_put_function(pfunc_cpu_setfreq_high); + pmf_put_function(pfunc_cpu_setfreq_low); + pmf_put_function(pfunc_slewing_done); + pmf_put_function(pfunc_cpu0_volt_high); + pmf_put_function(pfunc_cpu0_volt_low); + pmf_put_function(pfunc_cpu1_volt_high); + pmf_put_function(pfunc_cpu1_volt_low); + } + of_node_put(hwclock); + of_node_put(cpuid); + of_node_put(cpunode); + + return rc; +} + +static int __init g5_cpufreq_init(void) +{ + struct device_node *cpus; + int rc = 0; + + cpus = of_find_node_by_path("/cpus"); + if (cpus == NULL) { + DBG("No /cpus node !\n"); + return -ENODEV; + } + + if (of_machine_is_compatible("PowerMac7,2") || + of_machine_is_compatible("PowerMac7,3") || + of_machine_is_compatible("RackMac3,1")) + rc = g5_pm72_cpufreq_init(cpus); +#ifdef CONFIG_PMAC_SMU + else + rc = g5_neo2_cpufreq_init(cpus); +#endif /* CONFIG_PMAC_SMU */ + + of_node_put(cpus); + return rc; +} + +module_init(g5_cpufreq_init); + + +MODULE_LICENSE("GPL"); diff --git a/drivers/cpufreq/powernow-k6.c b/drivers/cpufreq/powernow-k6.c index ea0222a45b7b..ea8e10382ec5 100644 --- a/drivers/cpufreq/powernow-k6.c +++ b/drivers/cpufreq/powernow-k6.c @@ -58,7 +58,7 @@ static int powernow_k6_get_cpu_multiplier(void) msrval = POWERNOW_IOPORT + 0x0; wrmsr(MSR_K6_EPMR, msrval, 0); /* disable it again */ - return clock_ratio[(invalue >> 5)&7].index; + return clock_ratio[(invalue >> 5)&7].driver_data; } @@ -75,13 +75,13 @@ static void powernow_k6_set_state(struct cpufreq_policy *policy, unsigned long msrval; struct cpufreq_freqs freqs; - if (clock_ratio[best_i].index > max_multiplier) { + if (clock_ratio[best_i].driver_data > max_multiplier) { printk(KERN_ERR PFX "invalid target frequency\n"); return; } freqs.old = busfreq * powernow_k6_get_cpu_multiplier(); - freqs.new = busfreq * clock_ratio[best_i].index; + freqs.new = busfreq * clock_ratio[best_i].driver_data; cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE); @@ -156,7 +156,7 @@ static int powernow_k6_cpu_init(struct cpufreq_policy *policy) /* table init */ for (i = 0; (clock_ratio[i].frequency != CPUFREQ_TABLE_END); i++) { - f = clock_ratio[i].index; + f = clock_ratio[i].driver_data; if (f > max_multiplier) clock_ratio[i].frequency = CPUFREQ_ENTRY_INVALID; else diff --git a/drivers/cpufreq/powernow-k7.c b/drivers/cpufreq/powernow-k7.c index 53888dacbe58..b9f80b713fda 100644 --- a/drivers/cpufreq/powernow-k7.c +++ b/drivers/cpufreq/powernow-k7.c @@ -186,7 +186,7 @@ static int get_ranges(unsigned char *pst) fid = *pst++; powernow_table[j].frequency = (fsb * fid_codes[fid]) / 10; - powernow_table[j].index = fid; /* lower 8 bits */ + powernow_table[j].driver_data = fid; /* lower 8 bits */ speed = powernow_table[j].frequency; @@ -203,7 +203,7 @@ static int get_ranges(unsigned char *pst) maximum_speed = speed; vid = *pst++; - powernow_table[j].index |= (vid << 8); /* upper 8 bits */ + powernow_table[j].driver_data |= (vid << 8); /* upper 8 bits */ pr_debug(" FID: 0x%x (%d.%dx [%dMHz]) " "VID: 0x%x (%d.%03dV)\n", fid, fid_codes[fid] / 10, @@ -212,7 +212,7 @@ static int get_ranges(unsigned char *pst) mobile_vid_table[vid]%1000); } powernow_table[number_scales].frequency = CPUFREQ_TABLE_END; - powernow_table[number_scales].index = 0; + powernow_table[number_scales].driver_data = 0; return 0; } @@ -260,8 +260,8 @@ static void change_speed(struct cpufreq_policy *policy, unsigned int index) * vid are the upper 8 bits. */ - fid = powernow_table[index].index & 0xFF; - vid = (powernow_table[index].index & 0xFF00) >> 8; + fid = powernow_table[index].driver_data & 0xFF; + vid = (powernow_table[index].driver_data & 0xFF00) >> 8; rdmsrl(MSR_K7_FID_VID_STATUS, fidvidstatus.val); cfid = fidvidstatus.bits.CFID; @@ -373,8 +373,8 @@ static int powernow_acpi_init(void) fid = pc.bits.fid; powernow_table[i].frequency = fsb * fid_codes[fid] / 10; - powernow_table[i].index = fid; /* lower 8 bits */ - powernow_table[i].index |= (vid << 8); /* upper 8 bits */ + powernow_table[i].driver_data = fid; /* lower 8 bits */ + powernow_table[i].driver_data |= (vid << 8); /* upper 8 bits */ speed = powernow_table[i].frequency; speed_mhz = speed / 1000; @@ -417,7 +417,7 @@ static int powernow_acpi_init(void) } powernow_table[i].frequency = CPUFREQ_TABLE_END; - powernow_table[i].index = 0; + powernow_table[i].driver_data = 0; /* notify BIOS that we exist */ acpi_processor_notify_smm(THIS_MODULE); diff --git a/drivers/cpufreq/powernow-k8.c b/drivers/cpufreq/powernow-k8.c index b828efe4b2f8..78f018f2a5de 100644 --- a/drivers/cpufreq/powernow-k8.c +++ b/drivers/cpufreq/powernow-k8.c @@ -584,9 +584,9 @@ static void print_basics(struct powernow_k8_data *data) CPUFREQ_ENTRY_INVALID) { printk(KERN_INFO PFX "fid 0x%x (%d MHz), vid 0x%x\n", - data->powernow_table[j].index & 0xff, + data->powernow_table[j].driver_data & 0xff, data->powernow_table[j].frequency/1000, - data->powernow_table[j].index >> 8); + data->powernow_table[j].driver_data >> 8); } } if (data->batps) @@ -632,13 +632,13 @@ static int fill_powernow_table(struct powernow_k8_data *data, for (j = 0; j < data->numps; j++) { int freq; - powernow_table[j].index = pst[j].fid; /* lower 8 bits */ - powernow_table[j].index |= (pst[j].vid << 8); /* upper 8 bits */ + powernow_table[j].driver_data = pst[j].fid; /* lower 8 bits */ + powernow_table[j].driver_data |= (pst[j].vid << 8); /* upper 8 bits */ freq = find_khz_freq_from_fid(pst[j].fid); powernow_table[j].frequency = freq; } powernow_table[data->numps].frequency = CPUFREQ_TABLE_END; - powernow_table[data->numps].index = 0; + powernow_table[data->numps].driver_data = 0; if (query_current_values_with_pending_wait(data)) { kfree(powernow_table); @@ -810,7 +810,7 @@ static int powernow_k8_cpu_init_acpi(struct powernow_k8_data *data) powernow_table[data->acpi_data.state_count].frequency = CPUFREQ_TABLE_END; - powernow_table[data->acpi_data.state_count].index = 0; + powernow_table[data->acpi_data.state_count].driver_data = 0; data->powernow_table = powernow_table; if (cpumask_first(cpu_core_mask(data->cpu)) == data->cpu) @@ -865,7 +865,7 @@ static int fill_powernow_table_fidvid(struct powernow_k8_data *data, pr_debug(" %d : fid 0x%x, vid 0x%x\n", i, fid, vid); index = fid | (vid<<8); - powernow_table[i].index = index; + powernow_table[i].driver_data = index; freq = find_khz_freq_from_fid(fid); powernow_table[i].frequency = freq; @@ -941,8 +941,8 @@ static int transition_frequency_fidvid(struct powernow_k8_data *data, * the cpufreq frequency table in find_psb_table, vid * are the upper 8 bits. */ - fid = data->powernow_table[index].index & 0xFF; - vid = (data->powernow_table[index].index & 0xFF00) >> 8; + fid = data->powernow_table[index].driver_data & 0xFF; + vid = (data->powernow_table[index].driver_data & 0xFF00) >> 8; pr_debug("table matched fid 0x%x, giving vid 0x%x\n", fid, vid); @@ -967,9 +967,9 @@ static int transition_frequency_fidvid(struct powernow_k8_data *data, res = transition_fid_vid(data, fid, vid); if (res) - return res; - - freqs.new = find_khz_freq_from_fid(data->currfid); + freqs.new = freqs.old; + else + freqs.new = find_khz_freq_from_fid(data->currfid); cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE); return res; diff --git a/drivers/cpufreq/ppc-corenet-cpufreq.c b/drivers/cpufreq/ppc-corenet-cpufreq.c new file mode 100644 index 000000000000..3cae4529f959 --- /dev/null +++ b/drivers/cpufreq/ppc-corenet-cpufreq.c @@ -0,0 +1,380 @@ +/* + * Copyright 2013 Freescale Semiconductor, Inc. + * + * CPU Frequency Scaling driver for Freescale PowerPC corenet SoCs. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/clk.h> +#include <linux/cpufreq.h> +#include <linux/errno.h> +#include <sysdev/fsl_soc.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/mutex.h> +#include <linux/of.h> +#include <linux/slab.h> +#include <linux/smp.h> + +/** + * struct cpu_data - per CPU data struct + * @clk: the clk of CPU + * @parent: the parent node of cpu clock + * @table: frequency table + */ +struct cpu_data { + struct clk *clk; + struct device_node *parent; + struct cpufreq_frequency_table *table; +}; + +/** + * struct soc_data - SoC specific data + * @freq_mask: mask the disallowed frequencies + * @flag: unique flags + */ +struct soc_data { + u32 freq_mask[4]; + u32 flag; +}; + +#define FREQ_MASK 1 +/* see hardware specification for the allowed frqeuencies */ +static const struct soc_data sdata[] = { + { /* used by p2041 and p3041 */ + .freq_mask = {0x8, 0x8, 0x2, 0x2}, + .flag = FREQ_MASK, + }, + { /* used by p5020 */ + .freq_mask = {0x8, 0x2}, + .flag = FREQ_MASK, + }, + { /* used by p4080, p5040 */ + .freq_mask = {0}, + .flag = 0, + }, +}; + +/* + * the minimum allowed core frequency, in Hz + * for chassis v1.0, >= platform frequency + * for chassis v2.0, >= platform frequency / 2 + */ +static u32 min_cpufreq; +static const u32 *fmask; + +/* serialize frequency changes */ +static DEFINE_MUTEX(cpufreq_lock); +static DEFINE_PER_CPU(struct cpu_data *, cpu_data); + +/* cpumask in a cluster */ +static DEFINE_PER_CPU(cpumask_var_t, cpu_mask); + +#ifndef CONFIG_SMP +static inline const struct cpumask *cpu_core_mask(int cpu) +{ + return cpumask_of(0); +} +#endif + +static unsigned int corenet_cpufreq_get_speed(unsigned int cpu) +{ + struct cpu_data *data = per_cpu(cpu_data, cpu); + + return clk_get_rate(data->clk) / 1000; +} + +/* reduce the duplicated frequencies in frequency table */ +static void freq_table_redup(struct cpufreq_frequency_table *freq_table, + int count) +{ + int i, j; + + for (i = 1; i < count; i++) { + for (j = 0; j < i; j++) { + if (freq_table[j].frequency == CPUFREQ_ENTRY_INVALID || + freq_table[j].frequency != + freq_table[i].frequency) + continue; + + freq_table[i].frequency = CPUFREQ_ENTRY_INVALID; + break; + } + } +} + +/* sort the frequencies in frequency table in descenting order */ +static void freq_table_sort(struct cpufreq_frequency_table *freq_table, + int count) +{ + int i, j, ind; + unsigned int freq, max_freq; + struct cpufreq_frequency_table table; + for (i = 0; i < count - 1; i++) { + max_freq = freq_table[i].frequency; + ind = i; + for (j = i + 1; j < count; j++) { + freq = freq_table[j].frequency; + if (freq == CPUFREQ_ENTRY_INVALID || + freq <= max_freq) + continue; + ind = j; + max_freq = freq; + } + + if (ind != i) { + /* exchange the frequencies */ + table.driver_data = freq_table[i].driver_data; + table.frequency = freq_table[i].frequency; + freq_table[i].driver_data = freq_table[ind].driver_data; + freq_table[i].frequency = freq_table[ind].frequency; + freq_table[ind].driver_data = table.driver_data; + freq_table[ind].frequency = table.frequency; + } + } +} + +static int corenet_cpufreq_cpu_init(struct cpufreq_policy *policy) +{ + struct device_node *np; + int i, count, ret; + u32 freq, mask; + struct clk *clk; + struct cpufreq_frequency_table *table; + struct cpu_data *data; + unsigned int cpu = policy->cpu; + + np = of_get_cpu_node(cpu, NULL); + if (!np) + return -ENODEV; + + data = kzalloc(sizeof(*data), GFP_KERNEL); + if (!data) { + pr_err("%s: no memory\n", __func__); + goto err_np; + } + + data->clk = of_clk_get(np, 0); + if (IS_ERR(data->clk)) { + pr_err("%s: no clock information\n", __func__); + goto err_nomem2; + } + + data->parent = of_parse_phandle(np, "clocks", 0); + if (!data->parent) { + pr_err("%s: could not get clock information\n", __func__); + goto err_nomem2; + } + + count = of_property_count_strings(data->parent, "clock-names"); + table = kcalloc(count + 1, sizeof(*table), GFP_KERNEL); + if (!table) { + pr_err("%s: no memory\n", __func__); + goto err_node; + } + + if (fmask) + mask = fmask[get_hard_smp_processor_id(cpu)]; + else + mask = 0x0; + + for (i = 0; i < count; i++) { + clk = of_clk_get(data->parent, i); + freq = clk_get_rate(clk); + /* + * the clock is valid if its frequency is not masked + * and large than minimum allowed frequency. + */ + if (freq < min_cpufreq || (mask & (1 << i))) + table[i].frequency = CPUFREQ_ENTRY_INVALID; + else + table[i].frequency = freq / 1000; + table[i].driver_data = i; + } + freq_table_redup(table, count); + freq_table_sort(table, count); + table[i].frequency = CPUFREQ_TABLE_END; + + /* set the min and max frequency properly */ + ret = cpufreq_frequency_table_cpuinfo(policy, table); + if (ret) { + pr_err("invalid frequency table: %d\n", ret); + goto err_nomem1; + } + + data->table = table; + per_cpu(cpu_data, cpu) = data; + + /* update ->cpus if we have cluster, no harm if not */ + cpumask_copy(policy->cpus, per_cpu(cpu_mask, cpu)); + for_each_cpu(i, per_cpu(cpu_mask, cpu)) + per_cpu(cpu_data, i) = data; + + policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL; + policy->cur = corenet_cpufreq_get_speed(policy->cpu); + + cpufreq_frequency_table_get_attr(table, cpu); + of_node_put(np); + + return 0; + +err_nomem1: + kfree(table); +err_node: + of_node_put(data->parent); +err_nomem2: + per_cpu(cpu_data, cpu) = NULL; + kfree(data); +err_np: + of_node_put(np); + + return -ENODEV; +} + +static int __exit corenet_cpufreq_cpu_exit(struct cpufreq_policy *policy) +{ + struct cpu_data *data = per_cpu(cpu_data, policy->cpu); + unsigned int cpu; + + cpufreq_frequency_table_put_attr(policy->cpu); + of_node_put(data->parent); + kfree(data->table); + kfree(data); + + for_each_cpu(cpu, per_cpu(cpu_mask, policy->cpu)) + per_cpu(cpu_data, cpu) = NULL; + + return 0; +} + +static int corenet_cpufreq_verify(struct cpufreq_policy *policy) +{ + struct cpufreq_frequency_table *table = + per_cpu(cpu_data, policy->cpu)->table; + + return cpufreq_frequency_table_verify(policy, table); +} + +static int corenet_cpufreq_target(struct cpufreq_policy *policy, + unsigned int target_freq, unsigned int relation) +{ + struct cpufreq_freqs freqs; + unsigned int new; + struct clk *parent; + int ret; + struct cpu_data *data = per_cpu(cpu_data, policy->cpu); + + cpufreq_frequency_table_target(policy, data->table, + target_freq, relation, &new); + + if (policy->cur == data->table[new].frequency) + return 0; + + freqs.old = policy->cur; + freqs.new = data->table[new].frequency; + + mutex_lock(&cpufreq_lock); + cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE); + + parent = of_clk_get(data->parent, data->table[new].driver_data); + ret = clk_set_parent(data->clk, parent); + if (ret) + freqs.new = freqs.old; + + cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE); + mutex_unlock(&cpufreq_lock); + + return ret; +} + +static struct freq_attr *corenet_cpufreq_attr[] = { + &cpufreq_freq_attr_scaling_available_freqs, + NULL, +}; + +static struct cpufreq_driver ppc_corenet_cpufreq_driver = { + .name = "ppc_cpufreq", + .owner = THIS_MODULE, + .flags = CPUFREQ_CONST_LOOPS, + .init = corenet_cpufreq_cpu_init, + .exit = __exit_p(corenet_cpufreq_cpu_exit), + .verify = corenet_cpufreq_verify, + .target = corenet_cpufreq_target, + .get = corenet_cpufreq_get_speed, + .attr = corenet_cpufreq_attr, +}; + +static const struct of_device_id node_matches[] __initdata = { + { .compatible = "fsl,p2041-clockgen", .data = &sdata[0], }, + { .compatible = "fsl,p3041-clockgen", .data = &sdata[0], }, + { .compatible = "fsl,p5020-clockgen", .data = &sdata[1], }, + { .compatible = "fsl,p4080-clockgen", .data = &sdata[2], }, + { .compatible = "fsl,p5040-clockgen", .data = &sdata[2], }, + { .compatible = "fsl,qoriq-clockgen-2.0", }, + {} +}; + +static int __init ppc_corenet_cpufreq_init(void) +{ + int ret; + struct device_node *np; + const struct of_device_id *match; + const struct soc_data *data; + unsigned int cpu; + + np = of_find_matching_node(NULL, node_matches); + if (!np) + return -ENODEV; + + for_each_possible_cpu(cpu) { + if (!alloc_cpumask_var(&per_cpu(cpu_mask, cpu), GFP_KERNEL)) + goto err_mask; + cpumask_copy(per_cpu(cpu_mask, cpu), cpu_core_mask(cpu)); + } + + match = of_match_node(node_matches, np); + data = match->data; + if (data) { + if (data->flag) + fmask = data->freq_mask; + min_cpufreq = fsl_get_sys_freq(); + } else { + min_cpufreq = fsl_get_sys_freq() / 2; + } + + of_node_put(np); + + ret = cpufreq_register_driver(&ppc_corenet_cpufreq_driver); + if (!ret) + pr_info("Freescale PowerPC corenet CPU frequency scaling driver\n"); + + return ret; + +err_mask: + for_each_possible_cpu(cpu) + free_cpumask_var(per_cpu(cpu_mask, cpu)); + + return -ENOMEM; +} +module_init(ppc_corenet_cpufreq_init); + +static void __exit ppc_corenet_cpufreq_exit(void) +{ + unsigned int cpu; + + for_each_possible_cpu(cpu) + free_cpumask_var(per_cpu(cpu_mask, cpu)); + + cpufreq_unregister_driver(&ppc_corenet_cpufreq_driver); +} +module_exit(ppc_corenet_cpufreq_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Tang Yuantian <Yuantian.Tang@freescale.com>"); +MODULE_DESCRIPTION("cpufreq driver for Freescale e500mc series SoCs"); diff --git a/drivers/cpufreq/ppc_cbe_cpufreq.c b/drivers/cpufreq/ppc_cbe_cpufreq.c index e577a1dbbfcd..5936f8d6f2cc 100644 --- a/drivers/cpufreq/ppc_cbe_cpufreq.c +++ b/drivers/cpufreq/ppc_cbe_cpufreq.c @@ -106,7 +106,7 @@ static int cbe_cpufreq_cpu_init(struct cpufreq_policy *policy) /* initialize frequency table */ for (i=0; cbe_freqs[i].frequency!=CPUFREQ_TABLE_END; i++) { - cbe_freqs[i].frequency = max_freq / cbe_freqs[i].index; + cbe_freqs[i].frequency = max_freq / cbe_freqs[i].driver_data; pr_debug("%d: %d\n", i, cbe_freqs[i].frequency); } @@ -165,7 +165,7 @@ static int cbe_cpufreq_target(struct cpufreq_policy *policy, "1/%d of max frequency\n", policy->cpu, cbe_freqs[cbe_pmode_new].frequency, - cbe_freqs[cbe_pmode_new].index); + cbe_freqs[cbe_pmode_new].driver_data); rc = set_pmode(policy->cpu, cbe_pmode_new); diff --git a/drivers/cpufreq/pxa2xx-cpufreq.c b/drivers/cpufreq/pxa2xx-cpufreq.c index 9e5bc8e388a0..fb3981ac829f 100644 --- a/drivers/cpufreq/pxa2xx-cpufreq.c +++ b/drivers/cpufreq/pxa2xx-cpufreq.c @@ -420,7 +420,7 @@ static int pxa_cpufreq_init(struct cpufreq_policy *policy) /* Generate pxa25x the run cpufreq_frequency_table struct */ for (i = 0; i < NUM_PXA25x_RUN_FREQS; i++) { pxa255_run_freq_table[i].frequency = pxa255_run_freqs[i].khz; - pxa255_run_freq_table[i].index = i; + pxa255_run_freq_table[i].driver_data = i; } pxa255_run_freq_table[i].frequency = CPUFREQ_TABLE_END; @@ -428,7 +428,7 @@ static int pxa_cpufreq_init(struct cpufreq_policy *policy) for (i = 0; i < NUM_PXA25x_TURBO_FREQS; i++) { pxa255_turbo_freq_table[i].frequency = pxa255_turbo_freqs[i].khz; - pxa255_turbo_freq_table[i].index = i; + pxa255_turbo_freq_table[i].driver_data = i; } pxa255_turbo_freq_table[i].frequency = CPUFREQ_TABLE_END; @@ -440,9 +440,9 @@ static int pxa_cpufreq_init(struct cpufreq_policy *policy) if (freq > pxa27x_maxfreq) break; pxa27x_freq_table[i].frequency = freq; - pxa27x_freq_table[i].index = i; + pxa27x_freq_table[i].driver_data = i; } - pxa27x_freq_table[i].index = i; + pxa27x_freq_table[i].driver_data = i; pxa27x_freq_table[i].frequency = CPUFREQ_TABLE_END; /* diff --git a/drivers/cpufreq/pxa3xx-cpufreq.c b/drivers/cpufreq/pxa3xx-cpufreq.c index 15d60f857ad5..9c92ef032a9e 100644 --- a/drivers/cpufreq/pxa3xx-cpufreq.c +++ b/drivers/cpufreq/pxa3xx-cpufreq.c @@ -98,10 +98,10 @@ static int setup_freqs_table(struct cpufreq_policy *policy, return -ENOMEM; for (i = 0; i < num; i++) { - table[i].index = i; + table[i].driver_data = i; table[i].frequency = freqs[i].cpufreq_mhz * 1000; } - table[num].index = i; + table[num].driver_data = i; table[num].frequency = CPUFREQ_TABLE_END; pxa3xx_freqs = freqs; diff --git a/drivers/cpufreq/s3c2416-cpufreq.c b/drivers/cpufreq/s3c2416-cpufreq.c index 4f1881eee3f1..e35865af96e2 100644 --- a/drivers/cpufreq/s3c2416-cpufreq.c +++ b/drivers/cpufreq/s3c2416-cpufreq.c @@ -244,7 +244,7 @@ static int s3c2416_cpufreq_set_target(struct cpufreq_policy *policy, if (ret != 0) goto out; - idx = s3c_freq->freq_table[i].index; + idx = s3c_freq->freq_table[i].driver_data; if (idx == SOURCE_HCLK) to_dvs = 1; @@ -312,7 +312,7 @@ static void __init s3c2416_cpufreq_cfg_regulator(struct s3c2416_data *s3c_freq) if (freq->frequency == CPUFREQ_ENTRY_INVALID) continue; - dvfs = &s3c2416_dvfs_table[freq->index]; + dvfs = &s3c2416_dvfs_table[freq->driver_data]; found = 0; /* Check only the min-voltage, more is always ok on S3C2416 */ @@ -462,7 +462,7 @@ static int __init s3c2416_cpufreq_driver_init(struct cpufreq_policy *policy) freq = s3c_freq->freq_table; while (freq->frequency != CPUFREQ_TABLE_END) { /* special handling for dvs mode */ - if (freq->index == 0) { + if (freq->driver_data == 0) { if (!s3c_freq->hclk) { pr_debug("cpufreq: %dkHz unsupported as it would need unavailable dvs mode\n", freq->frequency); diff --git a/drivers/cpufreq/s3c64xx-cpufreq.c b/drivers/cpufreq/s3c64xx-cpufreq.c index 27cacb524796..13bb4bae64ee 100644 --- a/drivers/cpufreq/s3c64xx-cpufreq.c +++ b/drivers/cpufreq/s3c64xx-cpufreq.c @@ -87,7 +87,7 @@ static int s3c64xx_cpufreq_set_target(struct cpufreq_policy *policy, freqs.old = clk_get_rate(armclk) / 1000; freqs.new = s3c64xx_freq_table[i].frequency; freqs.flags = 0; - dvfs = &s3c64xx_dvfs_table[s3c64xx_freq_table[i].index]; + dvfs = &s3c64xx_dvfs_table[s3c64xx_freq_table[i].driver_data]; if (freqs.old == freqs.new) return 0; @@ -104,7 +104,8 @@ static int s3c64xx_cpufreq_set_target(struct cpufreq_policy *policy, if (ret != 0) { pr_err("Failed to set VDDARM for %dkHz: %d\n", freqs.new, ret); - goto err; + freqs.new = freqs.old; + goto post_notify; } } #endif @@ -113,10 +114,13 @@ static int s3c64xx_cpufreq_set_target(struct cpufreq_policy *policy, if (ret < 0) { pr_err("Failed to set rate %dkHz: %d\n", freqs.new, ret); - goto err; + freqs.new = freqs.old; } +post_notify: cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE); + if (ret) + goto err; #ifdef CONFIG_REGULATOR if (vddarm && freqs.new < freqs.old) { diff --git a/drivers/cpufreq/sc520_freq.c b/drivers/cpufreq/sc520_freq.c index f740b134d27b..77a210975fc4 100644 --- a/drivers/cpufreq/sc520_freq.c +++ b/drivers/cpufreq/sc520_freq.c @@ -71,7 +71,7 @@ static void sc520_freq_set_cpu_state(struct cpufreq_policy *policy, local_irq_disable(); clockspeed_reg = *cpuctl & ~0x03; - *cpuctl = clockspeed_reg | sc520_freq_table[state].index; + *cpuctl = clockspeed_reg | sc520_freq_table[state].driver_data; local_irq_enable(); diff --git a/drivers/cpufreq/sparc-us2e-cpufreq.c b/drivers/cpufreq/sparc-us2e-cpufreq.c index 306ae462bba6..93061a408773 100644 --- a/drivers/cpufreq/sparc-us2e-cpufreq.c +++ b/drivers/cpufreq/sparc-us2e-cpufreq.c @@ -308,17 +308,17 @@ static int __init us2e_freq_cpu_init(struct cpufreq_policy *policy) struct cpufreq_frequency_table *table = &us2e_freq_table[cpu].table[0]; - table[0].index = 0; + table[0].driver_data = 0; table[0].frequency = clock_tick / 1; - table[1].index = 1; + table[1].driver_data = 1; table[1].frequency = clock_tick / 2; - table[2].index = 2; + table[2].driver_data = 2; table[2].frequency = clock_tick / 4; - table[2].index = 3; + table[2].driver_data = 3; table[2].frequency = clock_tick / 6; - table[2].index = 4; + table[2].driver_data = 4; table[2].frequency = clock_tick / 8; - table[2].index = 5; + table[2].driver_data = 5; table[3].frequency = CPUFREQ_TABLE_END; policy->cpuinfo.transition_latency = 0; diff --git a/drivers/cpufreq/sparc-us3-cpufreq.c b/drivers/cpufreq/sparc-us3-cpufreq.c index c71ee142347a..880ee293d61e 100644 --- a/drivers/cpufreq/sparc-us3-cpufreq.c +++ b/drivers/cpufreq/sparc-us3-cpufreq.c @@ -169,13 +169,13 @@ static int __init us3_freq_cpu_init(struct cpufreq_policy *policy) struct cpufreq_frequency_table *table = &us3_freq_table[cpu].table[0]; - table[0].index = 0; + table[0].driver_data = 0; table[0].frequency = clock_tick / 1; - table[1].index = 1; + table[1].driver_data = 1; table[1].frequency = clock_tick / 2; - table[2].index = 2; + table[2].driver_data = 2; table[2].frequency = clock_tick / 32; - table[3].index = 0; + table[3].driver_data = 0; table[3].frequency = CPUFREQ_TABLE_END; policy->cpuinfo.transition_latency = 0; diff --git a/drivers/cpufreq/spear-cpufreq.c b/drivers/cpufreq/spear-cpufreq.c index 156829f4576d..c3efa7f2a908 100644 --- a/drivers/cpufreq/spear-cpufreq.c +++ b/drivers/cpufreq/spear-cpufreq.c @@ -250,11 +250,11 @@ static int spear_cpufreq_driver_init(void) } for (i = 0; i < cnt; i++) { - freq_tbl[i].index = i; + freq_tbl[i].driver_data = i; freq_tbl[i].frequency = be32_to_cpup(val++); } - freq_tbl[i].index = i; + freq_tbl[i].driver_data = i; freq_tbl[i].frequency = CPUFREQ_TABLE_END; spear_cpufreq.freq_tbl = freq_tbl; diff --git a/drivers/cpufreq/speedstep-centrino.c b/drivers/cpufreq/speedstep-centrino.c index 618e6f417b1c..0915e712fbdc 100644 --- a/drivers/cpufreq/speedstep-centrino.c +++ b/drivers/cpufreq/speedstep-centrino.c @@ -79,11 +79,11 @@ static struct cpufreq_driver centrino_driver; /* Computes the correct form for IA32_PERF_CTL MSR for a particular frequency/voltage operating point; frequency in MHz, volts in mV. - This is stored as "index" in the structure. */ + This is stored as "driver_data" in the structure. */ #define OP(mhz, mv) \ { \ .frequency = (mhz) * 1000, \ - .index = (((mhz)/100) << 8) | ((mv - 700) / 16) \ + .driver_data = (((mhz)/100) << 8) | ((mv - 700) / 16) \ } /* @@ -307,7 +307,7 @@ static unsigned extract_clock(unsigned msr, unsigned int cpu, int failsafe) per_cpu(centrino_model, cpu)->op_points[i].frequency != CPUFREQ_TABLE_END; i++) { - if (msr == per_cpu(centrino_model, cpu)->op_points[i].index) + if (msr == per_cpu(centrino_model, cpu)->op_points[i].driver_data) return per_cpu(centrino_model, cpu)-> op_points[i].frequency; } @@ -501,7 +501,7 @@ static int centrino_target (struct cpufreq_policy *policy, break; } - msr = per_cpu(centrino_model, cpu)->op_points[newstate].index; + msr = per_cpu(centrino_model, cpu)->op_points[newstate].driver_data; if (first_cpu) { rdmsr_on_cpu(good_cpu, MSR_IA32_PERF_CTL, &oldmsr, &h); diff --git a/drivers/cpufreq/tegra-cpufreq.c b/drivers/cpufreq/tegra-cpufreq.c index c74c0e130ef4..cd66b85d927c 100644 --- a/drivers/cpufreq/tegra-cpufreq.c +++ b/drivers/cpufreq/tegra-cpufreq.c @@ -28,17 +28,16 @@ #include <linux/io.h> #include <linux/suspend.h> -/* Frequency table index must be sequential starting at 0 */ static struct cpufreq_frequency_table freq_table[] = { - { 0, 216000 }, - { 1, 312000 }, - { 2, 456000 }, - { 3, 608000 }, - { 4, 760000 }, - { 5, 816000 }, - { 6, 912000 }, - { 7, 1000000 }, - { 8, CPUFREQ_TABLE_END }, + { .frequency = 216000 }, + { .frequency = 312000 }, + { .frequency = 456000 }, + { .frequency = 608000 }, + { .frequency = 760000 }, + { .frequency = 816000 }, + { .frequency = 912000 }, + { .frequency = 1000000 }, + { .frequency = CPUFREQ_TABLE_END }, }; #define NUM_CPUS 2 @@ -138,12 +137,12 @@ static int tegra_update_cpu_speed(struct cpufreq_policy *policy, if (ret) { pr_err("cpu-tegra: Failed to set cpu frequency to %d kHz\n", freqs.new); - return ret; + freqs.new = freqs.old; } cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE); - return 0; + return ret; } static unsigned long tegra_cpu_highest_speed(void) diff --git a/drivers/mfd/db8500-prcmu.c b/drivers/mfd/db8500-prcmu.c index 66f80973596b..ed79d7b78e7d 100644 --- a/drivers/mfd/db8500-prcmu.c +++ b/drivers/mfd/db8500-prcmu.c @@ -1724,9 +1724,9 @@ static long round_clock_rate(u8 clock, unsigned long rate) /* CPU FREQ table, may be changed due to if MAX_OPP is supported. */ static struct cpufreq_frequency_table db8500_cpufreq_table[] = { - { .frequency = 200000, .index = ARM_EXTCLK,}, - { .frequency = 400000, .index = ARM_50_OPP,}, - { .frequency = 800000, .index = ARM_100_OPP,}, + { .frequency = 200000, .driver_data = ARM_EXTCLK,}, + { .frequency = 400000, .driver_data = ARM_50_OPP,}, + { .frequency = 800000, .driver_data = ARM_100_OPP,}, { .frequency = CPUFREQ_TABLE_END,}, /* To be used for MAX_OPP. */ { .frequency = CPUFREQ_TABLE_END,}, }; @@ -1901,7 +1901,7 @@ static int set_armss_rate(unsigned long rate) return -EINVAL; /* Set the new arm opp. */ - return db8500_prcmu_set_arm_opp(db8500_cpufreq_table[i].index); + return db8500_prcmu_set_arm_opp(db8500_cpufreq_table[i].driver_data); } static int set_plldsi_rate(unsigned long rate) @@ -3105,7 +3105,7 @@ static void db8500_prcmu_update_cpufreq(void) { if (prcmu_has_arm_maxopp()) { db8500_cpufreq_table[3].frequency = 1000000; - db8500_cpufreq_table[3].index = ARM_MAX_OPP; + db8500_cpufreq_table[3].driver_data = ARM_MAX_OPP; } } diff --git a/drivers/sh/clk/core.c b/drivers/sh/clk/core.c index 7715de2629c1..74727851820d 100644 --- a/drivers/sh/clk/core.c +++ b/drivers/sh/clk/core.c @@ -63,12 +63,12 @@ void clk_rate_table_build(struct clk *clk, else freq = clk->parent->rate * mult / div; - freq_table[i].index = i; + freq_table[i].driver_data = i; freq_table[i].frequency = freq; } /* Termination entry */ - freq_table[i].index = i; + freq_table[i].driver_data = i; freq_table[i].frequency = CPUFREQ_TABLE_END; } |