diff options
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/bus/mvebu-mbus.c | 120 |
1 files changed, 83 insertions, 37 deletions
diff --git a/drivers/bus/mvebu-mbus.c b/drivers/bus/mvebu-mbus.c index fb9ec6221730..c43c3d2baf73 100644 --- a/drivers/bus/mvebu-mbus.c +++ b/drivers/bus/mvebu-mbus.c @@ -57,8 +57,8 @@ #include <linux/of_address.h> #include <linux/debugfs.h> #include <linux/log2.h> -#include <linux/syscore_ops.h> #include <linux/memblock.h> +#include <linux/syscore_ops.h> /* * DDR target is the same on all platforms. @@ -70,6 +70,7 @@ */ #define WIN_CTRL_OFF 0x0000 #define WIN_CTRL_ENABLE BIT(0) +/* Only on HW I/O coherency capable platforms */ #define WIN_CTRL_SYNCBARRIER BIT(1) #define WIN_CTRL_TGT_MASK 0xf0 #define WIN_CTRL_TGT_SHIFT 4 @@ -102,9 +103,7 @@ /* Relative to mbusbridge_base */ #define MBUS_BRIDGE_CTRL_OFF 0x0 -#define MBUS_BRIDGE_SIZE_MASK 0xffff0000 #define MBUS_BRIDGE_BASE_OFF 0x4 -#define MBUS_BRIDGE_BASE_MASK 0xffff0000 /* Maximum number of windows, for all known platforms */ #define MBUS_WINS_MAX 20 @@ -154,13 +153,39 @@ struct mvebu_mbus_state { static struct mvebu_mbus_state mbus_state; +/* + * We provide two variants of the mv_mbus_dram_info() function: + * + * - The normal one, where the described DRAM ranges may overlap with + * the I/O windows, but for which the DRAM ranges are guaranteed to + * have a power of two size. Such ranges are suitable for the DMA + * masters that only DMA between the RAM and the device, which is + * actually all devices except the crypto engines. + * + * - The 'nooverlap' one, where the described DRAM ranges are + * guaranteed to not overlap with the I/O windows, but for which the + * DRAM ranges will not have power of two sizes. They will only be + * aligned on a 64 KB boundary, and have a size multiple of 64 + * KB. Such ranges are suitable for the DMA masters that DMA between + * the crypto SRAM (which is mapped through an I/O window) and a + * device. This is the case for the crypto engines. + */ + static struct mbus_dram_target_info mvebu_mbus_dram_info; +static struct mbus_dram_target_info mvebu_mbus_dram_info_nooverlap; + const struct mbus_dram_target_info *mv_mbus_dram_info(void) { return &mvebu_mbus_dram_info; } EXPORT_SYMBOL_GPL(mv_mbus_dram_info); +const struct mbus_dram_target_info *mv_mbus_dram_info_nooverlap(void) +{ + return &mvebu_mbus_dram_info_nooverlap; +} +EXPORT_SYMBOL_GPL(mv_mbus_dram_info_nooverlap); + /* Checks whether the given window has remap capability */ static bool mvebu_mbus_window_is_remappable(struct mvebu_mbus_state *mbus, const int win) @@ -323,8 +348,9 @@ static int mvebu_mbus_setup_window(struct mvebu_mbus_state *mbus, ctrl = ((size - 1) & WIN_CTRL_SIZE_MASK) | (attr << WIN_CTRL_ATTR_SHIFT) | (target << WIN_CTRL_TGT_SHIFT) | - WIN_CTRL_SYNCBARRIER | WIN_CTRL_ENABLE; + if (mbus->hw_io_coherency) + ctrl |= WIN_CTRL_SYNCBARRIER; writel(base & WIN_BASE_LOW, addr + WIN_BASE_OFF); writel(ctrl, addr + WIN_CTRL_OFF); @@ -592,7 +618,7 @@ mvebu_mbus_find_bridge_hole(uint64_t *start, uint64_t *end) * This part of the memory is above 4 GB, so we don't * care for the MBus bridge hole. */ - if (r->base >= 0x100000000) + if (r->base >= 0x100000000ULL) continue; /* @@ -604,50 +630,33 @@ mvebu_mbus_find_bridge_hole(uint64_t *start, uint64_t *end) } *start = s; - *end = 0x100000000; + *end = 0x100000000ULL; } +/* + * This function fills in the mvebu_mbus_dram_info_nooverlap data + * structure, by looking at the mvebu_mbus_dram_info data, and + * removing the parts of it that overlap with I/O windows. + */ static void __init -mvebu_mbus_default_setup_cpu_target(struct mvebu_mbus_state *mbus) +mvebu_mbus_setup_cpu_target_nooverlap(struct mvebu_mbus_state *mbus) { - int i; - int cs; uint64_t mbus_bridge_base, mbus_bridge_end; - - mvebu_mbus_dram_info.mbus_dram_target_id = TARGET_DDR; + int cs_nooverlap = 0; + int i; mvebu_mbus_find_bridge_hole(&mbus_bridge_base, &mbus_bridge_end); - for (i = 0, cs = 0; i < 4; i++) { - u64 base = readl(mbus->sdramwins_base + DDR_BASE_CS_OFF(i)); - u64 size = readl(mbus->sdramwins_base + DDR_SIZE_CS_OFF(i)); - u64 end; + for (i = 0; i < mvebu_mbus_dram_info.num_cs; i++) { struct mbus_dram_window *w; + u64 base, size, end; - /* Ignore entries that are not enabled */ - if (!(size & DDR_SIZE_ENABLED)) - continue; - - /* - * Ignore entries whose base address is above 2^32, - * since devices cannot DMA to such high addresses - */ - if (base & DDR_BASE_CS_HIGH_MASK) - continue; - - base = base & DDR_BASE_CS_LOW_MASK; - size = (size | ~DDR_SIZE_MASK) + 1; + w = &mvebu_mbus_dram_info.cs[i]; + base = w->base; + size = w->size; end = base + size; /* - * Adjust base/size of the current CS to make sure it - * doesn't overlap with the MBus bridge hole. This is - * particularly important for devices that do DMA from - * DRAM to a SRAM mapped in a MBus window, such as the - * CESA cryptographic engine. - */ - - /* * The CS is fully enclosed inside the MBus bridge * area, so ignore it. */ @@ -670,7 +679,7 @@ mvebu_mbus_default_setup_cpu_target(struct mvebu_mbus_state *mbus) if (base < mbus_bridge_base && end > mbus_bridge_base) size -= end - mbus_bridge_base; - w = &mvebu_mbus_dram_info.cs[cs++]; + w = &mvebu_mbus_dram_info_nooverlap.cs[cs_nooverlap++]; w->cs_index = i; w->mbus_attr = 0xf & ~(1 << i); if (mbus->hw_io_coherency) @@ -678,6 +687,42 @@ mvebu_mbus_default_setup_cpu_target(struct mvebu_mbus_state *mbus) w->base = base; w->size = size; } + + mvebu_mbus_dram_info_nooverlap.mbus_dram_target_id = TARGET_DDR; + mvebu_mbus_dram_info_nooverlap.num_cs = cs_nooverlap; +} + +static void __init +mvebu_mbus_default_setup_cpu_target(struct mvebu_mbus_state *mbus) +{ + int i; + int cs; + + mvebu_mbus_dram_info.mbus_dram_target_id = TARGET_DDR; + + for (i = 0, cs = 0; i < 4; i++) { + u32 base = readl(mbus->sdramwins_base + DDR_BASE_CS_OFF(i)); + u32 size = readl(mbus->sdramwins_base + DDR_SIZE_CS_OFF(i)); + + /* + * We only take care of entries for which the chip + * select is enabled, and that don't have high base + * address bits set (devices can only access the first + * 32 bits of the memory). + */ + if ((size & DDR_SIZE_ENABLED) && + !(base & DDR_BASE_CS_HIGH_MASK)) { + struct mbus_dram_window *w; + + w = &mvebu_mbus_dram_info.cs[cs++]; + w->cs_index = i; + w->mbus_attr = 0xf & ~(1 << i); + if (mbus->hw_io_coherency) + w->mbus_attr |= ATTR_HW_COHERENCY; + w->base = base & DDR_BASE_CS_LOW_MASK; + w->size = (size | ~DDR_SIZE_MASK) + 1; + } + } mvebu_mbus_dram_info.num_cs = cs; } @@ -1035,6 +1080,7 @@ static int __init mvebu_mbus_common_init(struct mvebu_mbus_state *mbus, mvebu_mbus_disable_window(mbus, win); mbus->soc->setup_cpu_target(mbus); + mvebu_mbus_setup_cpu_target_nooverlap(mbus); if (is_coherent) writel(UNIT_SYNC_BARRIER_ALL, |