diff options
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/usb/chipidea/udc.c | 9 | ||||
| -rw-r--r-- | drivers/usb/dwc3/dwc3-pci.c | 4 | ||||
| -rw-r--r-- | drivers/usb/dwc3/gadget.c | 5 | ||||
| -rw-r--r-- | drivers/usb/gadget/function/f_eem.c | 2 | ||||
| -rw-r--r-- | drivers/usb/gadget/udc/renesas_usb3.c | 2 | ||||
| -rw-r--r-- | drivers/usb/host/xhci-ring.c | 6 | ||||
| -rw-r--r-- | drivers/usb/phy/phy-generic.c | 8 | ||||
| -rw-r--r-- | drivers/usb/renesas_usbhs/mod.c | 11 |
8 files changed, 39 insertions, 8 deletions
diff --git a/drivers/usb/chipidea/udc.c b/drivers/usb/chipidea/udc.c index dfec5a176315..b93356834bb5 100644 --- a/drivers/usb/chipidea/udc.c +++ b/drivers/usb/chipidea/udc.c @@ -949,6 +949,15 @@ static int isr_setup_status_phase(struct ci_hdrc *ci) int retval; struct ci_hw_ep *hwep; + /* + * Unexpected USB controller behavior, caused by bad signal integrity + * or ground reference problems, can lead to isr_setup_status_phase + * being called with ci->status equal to NULL. + * If this situation occurs, you should review your USB hardware design. + */ + if (WARN_ON_ONCE(!ci->status)) + return -EPIPE; + hwep = (ci->ep0_dir == TX) ? ci->ep0out : ci->ep0in; ci->status->context = ci; ci->status->complete = isr_setup_status_complete; diff --git a/drivers/usb/dwc3/dwc3-pci.c b/drivers/usb/dwc3/dwc3-pci.c index 0a32430f4c41..6df0f5dad9a4 100644 --- a/drivers/usb/dwc3/dwc3-pci.c +++ b/drivers/usb/dwc3/dwc3-pci.c @@ -249,7 +249,9 @@ static int dwc3_pci_runtime_resume(struct device *dev) return pm_runtime_get(&dwc3->dev); } +#endif /* CONFIG_PM */ +#ifdef CONFIG_PM_SLEEP static int dwc3_pci_pm_dummy(struct device *dev) { /* @@ -262,7 +264,7 @@ static int dwc3_pci_pm_dummy(struct device *dev) */ return 0; } -#endif /* CONFIG_PM */ +#endif /* CONFIG_PM_SLEEP */ static struct dev_pm_ops dwc3_pci_dev_pm_ops = { SET_SYSTEM_SLEEP_PM_OPS(dwc3_pci_pm_dummy, dwc3_pci_pm_dummy) diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index 7a8d3d822b54..122e64df2f4d 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -884,9 +884,12 @@ static u32 dwc3_calc_trbs_left(struct dwc3_ep *dep) return DWC3_TRB_NUM - 1; } - trbs_left = dep->trb_dequeue - dep->trb_enqueue - 1; + trbs_left = dep->trb_dequeue - dep->trb_enqueue; trbs_left &= (DWC3_TRB_NUM - 1); + if (dep->trb_dequeue < dep->trb_enqueue) + trbs_left--; + return trbs_left; } diff --git a/drivers/usb/gadget/function/f_eem.c b/drivers/usb/gadget/function/f_eem.c index 8741fd740174..007ec6e4a5d4 100644 --- a/drivers/usb/gadget/function/f_eem.c +++ b/drivers/usb/gadget/function/f_eem.c @@ -342,7 +342,7 @@ static struct sk_buff *eem_wrap(struct gether *port, struct sk_buff *skb) struct sk_buff *skb2 = NULL; struct usb_ep *in = port->in_ep; int headroom, tailroom, padlen = 0; - u16 len = skb->len; + u16 len; if (!skb) return NULL; diff --git a/drivers/usb/gadget/udc/renesas_usb3.c b/drivers/usb/gadget/udc/renesas_usb3.c index 93a3bec81df7..fb8fc34827ab 100644 --- a/drivers/usb/gadget/udc/renesas_usb3.c +++ b/drivers/usb/gadget/udc/renesas_usb3.c @@ -106,6 +106,7 @@ /* DRD_CON */ #define DRD_CON_PERI_CON BIT(24) +#define DRD_CON_VBOUT BIT(0) /* USB_INT_ENA_1 and USB_INT_STA_1 */ #define USB_INT_1_B3_PLLWKUP BIT(31) @@ -363,6 +364,7 @@ static void usb3_init_epc_registers(struct renesas_usb3 *usb3) { /* FIXME: How to change host / peripheral mode as well? */ usb3_set_bit(usb3, DRD_CON_PERI_CON, USB3_DRD_CON); + usb3_clear_bit(usb3, DRD_CON_VBOUT, USB3_DRD_CON); usb3_write(usb3, ~0, USB3_USB_INT_STA_1); usb3_enable_irq_1(usb3, USB_INT_1_VBUS_CNG); diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index fd9fd12e4861..797137e26549 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -850,6 +850,10 @@ void xhci_stop_endpoint_command_watchdog(unsigned long arg) spin_lock_irqsave(&xhci->lock, flags); ep->stop_cmds_pending--; + if (xhci->xhc_state & XHCI_STATE_REMOVING) { + spin_unlock_irqrestore(&xhci->lock, flags); + return; + } if (xhci->xhc_state & XHCI_STATE_DYING) { xhci_dbg_trace(xhci, trace_xhci_dbg_cancel_urb, "Stop EP timer ran, but another timer marked " @@ -903,7 +907,7 @@ void xhci_stop_endpoint_command_watchdog(unsigned long arg) spin_unlock_irqrestore(&xhci->lock, flags); xhci_dbg_trace(xhci, trace_xhci_dbg_cancel_urb, "Calling usb_hc_died()"); - usb_hc_died(xhci_to_hcd(xhci)->primary_hcd); + usb_hc_died(xhci_to_hcd(xhci)); xhci_dbg_trace(xhci, trace_xhci_dbg_cancel_urb, "xHCI host controller is dead."); } diff --git a/drivers/usb/phy/phy-generic.c b/drivers/usb/phy/phy-generic.c index 980c9dee09eb..427efb5eebae 100644 --- a/drivers/usb/phy/phy-generic.c +++ b/drivers/usb/phy/phy-generic.c @@ -144,14 +144,18 @@ static irqreturn_t nop_gpio_vbus_thread(int irq, void *data) int usb_gen_phy_init(struct usb_phy *phy) { struct usb_phy_generic *nop = dev_get_drvdata(phy->dev); + int ret; if (!IS_ERR(nop->vcc)) { if (regulator_enable(nop->vcc)) dev_err(phy->dev, "Failed to enable power\n"); } - if (!IS_ERR(nop->clk)) - clk_prepare_enable(nop->clk); + if (!IS_ERR(nop->clk)) { + ret = clk_prepare_enable(nop->clk); + if (ret) + return ret; + } nop_reset(nop); diff --git a/drivers/usb/renesas_usbhs/mod.c b/drivers/usb/renesas_usbhs/mod.c index d4be5d594896..28965ef4f824 100644 --- a/drivers/usb/renesas_usbhs/mod.c +++ b/drivers/usb/renesas_usbhs/mod.c @@ -282,9 +282,16 @@ static irqreturn_t usbhs_interrupt(int irq, void *data) if (usbhs_mod_is_host(priv)) usbhs_write(priv, INTSTS1, ~irq_state.intsts1 & INTSTS1_MAGIC); - usbhs_write(priv, BRDYSTS, ~irq_state.brdysts); + /* + * The driver should not clear the xxxSTS after the line of + * "call irq callback functions" because each "if" statement is + * possible to call the callback function for avoiding any side effects. + */ + if (irq_state.intsts0 & BRDY) + usbhs_write(priv, BRDYSTS, ~irq_state.brdysts); usbhs_write(priv, NRDYSTS, ~irq_state.nrdysts); - usbhs_write(priv, BEMPSTS, ~irq_state.bempsts); + if (irq_state.intsts0 & BEMP) + usbhs_write(priv, BEMPSTS, ~irq_state.bempsts); /* * call irq callback functions |