diff options
Diffstat (limited to 'drivers')
30 files changed, 727 insertions, 966 deletions
diff --git a/drivers/acorn/block/fd1772.c b/drivers/acorn/block/fd1772.c index 3cd2e968e96c..c0a37d98b4f3 100644 --- a/drivers/acorn/block/fd1772.c +++ b/drivers/acorn/block/fd1772.c @@ -1283,8 +1283,7 @@ static void do_fd_request(request_queue_t* q) if (fdc_busy) return; save_flags(flags); cli(); - while (fdc_busy) - sleep_on(&fdc_wait); + wait_event(fdc_wait, !fdc_busy); fdc_busy = 1; ENABLE_IRQ(); restore_flags(flags); diff --git a/drivers/char/watchdog/i8xx_tco.c b/drivers/char/watchdog/i8xx_tco.c index f975dab1ddf9..a13395e2c372 100644 --- a/drivers/char/watchdog/i8xx_tco.c +++ b/drivers/char/watchdog/i8xx_tco.c @@ -1,5 +1,5 @@ /* - * i8xx_tco 0.07: TCO timer driver for i8xx chipsets + * i8xx_tco: TCO timer driver for i8xx chipsets * * (c) Copyright 2000 kernel concepts <nils@kernelconcepts.de>, All Rights Reserved. * http://www.kernelconcepts.de @@ -63,6 +63,9 @@ * 20050128 Wim Van Sebroeck <wim@iguana.be> * 0.07 Added support for the ICH4-M, ICH6, ICH6R, ICH6-M, ICH6W and ICH6RW * chipsets. Also added support for the "undocumented" ICH7 chipset. + * 20050807 Wim Van Sebroeck <wim@iguana.be> + * 0.08 Make sure that the watchdog is only "armed" when started. + * (Kernel Bug 4251) */ /* @@ -87,7 +90,7 @@ #include "i8xx_tco.h" /* Module and version information */ -#define TCO_VERSION "0.07" +#define TCO_VERSION "0.08" #define TCO_MODULE_NAME "i8xx TCO timer" #define TCO_DRIVER_NAME TCO_MODULE_NAME ", v" TCO_VERSION #define PFX TCO_MODULE_NAME ": " @@ -125,10 +128,18 @@ static int tco_timer_start (void) unsigned char val; spin_lock(&tco_lock); + + /* disable chipset's NO_REBOOT bit */ + pci_read_config_byte (i8xx_tco_pci, 0xd4, &val); + val &= 0xfd; + pci_write_config_byte (i8xx_tco_pci, 0xd4, val); + + /* Bit 11: TCO Timer Halt -> 0 = The TCO timer is enabled to count */ val = inb (TCO1_CNT + 1); val &= 0xf7; outb (val, TCO1_CNT + 1); val = inb (TCO1_CNT + 1); + spin_unlock(&tco_lock); if (val & 0x08) @@ -138,13 +149,20 @@ static int tco_timer_start (void) static int tco_timer_stop (void) { - unsigned char val; + unsigned char val, val1; spin_lock(&tco_lock); + /* Bit 11: TCO Timer Halt -> 1 = The TCO timer is disabled */ val = inb (TCO1_CNT + 1); val |= 0x08; outb (val, TCO1_CNT + 1); val = inb (TCO1_CNT + 1); + + /* Set the NO_REBOOT bit to prevent later reboots, just for sure */ + pci_read_config_byte (i8xx_tco_pci, 0xd4, &val1); + val1 |= 0x02; + pci_write_config_byte (i8xx_tco_pci, 0xd4, val1); + spin_unlock(&tco_lock); if ((val & 0x08) == 0) @@ -155,6 +173,7 @@ static int tco_timer_stop (void) static int tco_timer_keepalive (void) { spin_lock(&tco_lock); + /* Reload the timer by writing to the TCO Timer Reload register */ outb (0x01, TCO1_RLD); spin_unlock(&tco_lock); return 0; @@ -417,9 +436,8 @@ static unsigned char __init i8xx_tco_getdevice (void) printk (KERN_ERR PFX "failed to get TCOBASE address\n"); return 0; } - /* - * Check chipset's NO_REBOOT bit - */ + + /* Check chipset's NO_REBOOT bit */ pci_read_config_byte (i8xx_tco_pci, 0xd4, &val1); if (val1 & 0x02) { val1 &= 0xfd; @@ -430,6 +448,10 @@ static unsigned char __init i8xx_tco_getdevice (void) return 0; /* Cannot reset NO_REBOOT bit */ } } + /* Disable reboots untill the watchdog starts */ + val1 |= 0x02; + pci_write_config_byte (i8xx_tco_pci, 0xd4, val1); + /* Set the TCO_EN bit in SMI_EN register */ if (!request_region (SMI_EN + 1, 1, "i8xx TCO")) { printk (KERN_ERR PFX "I/O address 0x%04x already in use\n", @@ -505,17 +527,10 @@ out: static void __exit watchdog_cleanup (void) { - u8 val; - /* Stop the timer before we leave */ if (!nowayout) tco_timer_stop (); - /* Set the NO_REBOOT bit to prevent later reboots, just for sure */ - pci_read_config_byte (i8xx_tco_pci, 0xd4, &val); - val |= 0x02; - pci_write_config_byte (i8xx_tco_pci, 0xd4, val); - /* Deregister */ misc_deregister (&i8xx_tco_miscdev); unregister_reboot_notifier(&i8xx_tco_notifier); diff --git a/drivers/i2c/busses/i2c-sibyte.c b/drivers/i2c/busses/i2c-sibyte.c index 1c99536b673b..fa503ed9f86d 100644 --- a/drivers/i2c/busses/i2c-sibyte.c +++ b/drivers/i2c/busses/i2c-sibyte.c @@ -23,8 +23,8 @@ #include <asm/sibyte/sb1250_smbus.h> static struct i2c_algo_sibyte_data sibyte_board_data[2] = { - { NULL, 0, (void *) (KSEG1+A_SMB_BASE(0)) }, - { NULL, 1, (void *) (KSEG1+A_SMB_BASE(1)) } + { NULL, 0, (void *) (CKSEG1+A_SMB_BASE(0)) }, + { NULL, 1, (void *) (CKSEG1+A_SMB_BASE(1)) } }; static struct i2c_adapter sibyte_board_adapter[2] = { diff --git a/drivers/ide/ide-disk.c b/drivers/ide/ide-disk.c index f9c1acb4ed6a..c9d3a00a3c0c 100644 --- a/drivers/ide/ide-disk.c +++ b/drivers/ide/ide-disk.c @@ -1220,7 +1220,7 @@ static int ide_disk_probe(struct device *dev) goto failed; g = alloc_disk_node(1 << PARTN_BITS, - pcibus_to_node(drive->hwif->pci_dev->bus)); + hwif_to_node(drive->hwif)); if (!g) goto out_free_idkp; diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c index 94daf40ae323..c1128ae5cd2f 100644 --- a/drivers/ide/ide-probe.c +++ b/drivers/ide/ide-probe.c @@ -960,15 +960,6 @@ static void save_match(ide_hwif_t *hwif, ide_hwif_t *new, ide_hwif_t **match) } #endif /* MAX_HWIFS > 1 */ -static inline int hwif_to_node(ide_hwif_t *hwif) -{ - if (hwif->pci_dev) - return pcibus_to_node(hwif->pci_dev->bus); - else - /* Add ways to determine the node of other busses here */ - return -1; -} - /* * init request queue */ diff --git a/drivers/isdn/icn/icn.c b/drivers/isdn/icn/icn.c index e0d1b01cc74c..386df71eee74 100644 --- a/drivers/isdn/icn/icn.c +++ b/drivers/isdn/icn/icn.c @@ -1650,7 +1650,7 @@ static void __exit icn_exit(void) { isdn_ctrl cmd; icn_card *card = cards; - icn_card *last; + icn_card *last, *tmpcard; int i; unsigned long flags; @@ -1670,8 +1670,9 @@ static void __exit icn_exit(void) for (i = 0; i < ICN_BCH; i++) icn_free_queue(card, i); } - card = card->next; + tmpcard = card->next; spin_unlock_irqrestore(&card->lock, flags); + card = tmpcard; } card = cards; cards = NULL; diff --git a/drivers/media/dvb/frontends/Kconfig b/drivers/media/dvb/frontends/Kconfig index e83256d0fd14..a50a41f6f79d 100644 --- a/drivers/media/dvb/frontends/Kconfig +++ b/drivers/media/dvb/frontends/Kconfig @@ -188,7 +188,7 @@ config DVB_BCM3510 support this frontend. config DVB_LGDT330X - tristate "LGDT3302 or LGDT3303 based (DViCO FusionHDTV Gold)" + tristate "LG Electronics LGDT3302/LGDT3303 based" depends on DVB_CORE help An ATSC 8VSB and QAM64/256 tuner module. Say Y when you want diff --git a/drivers/media/dvb/frontends/dvb-pll.c b/drivers/media/dvb/frontends/dvb-pll.c index 5264310c070e..536c35d969b7 100644 --- a/drivers/media/dvb/frontends/dvb-pll.c +++ b/drivers/media/dvb/frontends/dvb-pll.c @@ -225,6 +225,22 @@ struct dvb_pll_desc dvb_pll_tua6034 = { }; EXPORT_SYMBOL(dvb_pll_tua6034); +/* Infineon TUA6034 + * used in LG Innotek TDVS-H062F + */ +struct dvb_pll_desc dvb_pll_tdvs_tua6034 = { + .name = "LG/Infineon TUA6034", + .min = 54000000, + .max = 863000000, + .count = 3, + .entries = { + { 160000000, 44000000, 62500, 0xce, 0x01 }, + { 455000000, 44000000, 62500, 0xce, 0x02 }, + { 999999999, 44000000, 62500, 0xce, 0x04 }, + }, +}; +EXPORT_SYMBOL(dvb_pll_tdvs_tua6034); + /* Philips FMD1216ME * used in Medion Hybrid PCMCIA card and USB Box */ diff --git a/drivers/media/dvb/frontends/dvb-pll.h b/drivers/media/dvb/frontends/dvb-pll.h index cb794759d89e..205b2d1a8852 100644 --- a/drivers/media/dvb/frontends/dvb-pll.h +++ b/drivers/media/dvb/frontends/dvb-pll.h @@ -31,6 +31,7 @@ extern struct dvb_pll_desc dvb_pll_unknown_1; extern struct dvb_pll_desc dvb_pll_tua6010xs; extern struct dvb_pll_desc dvb_pll_env57h1xd5; extern struct dvb_pll_desc dvb_pll_tua6034; +extern struct dvb_pll_desc dvb_pll_tdvs_tua6034; extern struct dvb_pll_desc dvb_pll_tda665x; extern struct dvb_pll_desc dvb_pll_fmd1216me; extern struct dvb_pll_desc dvb_pll_tded4; diff --git a/drivers/media/dvb/frontends/lgdt330x.c b/drivers/media/dvb/frontends/lgdt330x.c index e94dee50eecd..1f1cd7a8d500 100644 --- a/drivers/media/dvb/frontends/lgdt330x.c +++ b/drivers/media/dvb/frontends/lgdt330x.c @@ -1,11 +1,8 @@ /* - * Support for LGDT3302 & LGDT3303 (DViCO FusionHDTV Gold) - VSB/QAM + * Support for LGDT3302 and LGDT3303 - VSB/QAM * * Copyright (C) 2005 Wilson Michaels <wilsonmichaels@earthlink.net> * - * Based on code from Kirk Lapray <kirk_lapray@bigfoot.com> - * Copyright (C) 2005 - * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or @@ -25,11 +22,13 @@ /* * NOTES ABOUT THIS DRIVER * - * This driver supports DViCO FusionHDTV Gold under Linux. + * This Linux driver supports: + * DViCO FusionHDTV 3 Gold-Q + * DViCO FusionHDTV 3 Gold-T + * DViCO FusionHDTV 5 Gold * * TODO: - * BER and signal strength always return 0. - * Include support for LGDT3303 + * signal strength always returns 0. * */ @@ -41,7 +40,6 @@ #include <asm/byteorder.h> #include "dvb_frontend.h" -#include "dvb-pll.h" #include "lgdt330x_priv.h" #include "lgdt330x.h" @@ -70,55 +68,37 @@ struct lgdt330x_state u32 current_frequency; }; -static int i2c_writebytes (struct lgdt330x_state* state, - u8 addr, /* demod_address or pll_address */ +static int i2c_write_demod_bytes (struct lgdt330x_state* state, u8 *buf, /* data bytes to send */ int len /* number of bytes to send */ ) { - u8 tmp[] = { buf[0], buf[1] }; struct i2c_msg msg = - { .addr = addr, .flags = 0, .buf = tmp, .len = 2 }; - int err; + { .addr = state->config->demod_address, + .flags = 0, + .buf = buf, + .len = 2 }; int i; + int err; - for (i=1; i<len; i++) { - tmp[1] = buf[i]; + for (i=0; i<len-1; i+=2){ if ((err = i2c_transfer(state->i2c, &msg, 1)) != 1) { - printk(KERN_WARNING "lgdt330x: %s error (addr %02x <- %02x, err == %i)\n", __FUNCTION__, addr, buf[0], err); + printk(KERN_WARNING "lgdt330x: %s error (addr %02x <- %02x, err = %i)\n", __FUNCTION__, msg.buf[0], msg.buf[1], err); if (err < 0) return err; else return -EREMOTEIO; } - tmp[0]++; + msg.buf += 2; } return 0; } -#if 0 -static int i2c_readbytes (struct lgdt330x_state* state, - u8 addr, /* demod_address or pll_address */ - u8 *buf, /* holds data bytes read */ - int len /* number of bytes to read */ ) -{ - struct i2c_msg msg = - { .addr = addr, .flags = I2C_M_RD, .buf = buf, .len = len }; - int err; - - if ((err = i2c_transfer(state->i2c, &msg, 1)) != 1) { - printk(KERN_WARNING "lgdt330x: %s error (addr %02x, err == %i)\n", __FUNCTION__, addr, err); - return -EREMOTEIO; - } - return 0; -} -#endif - /* * This routine writes the register (reg) to the demod bus * then reads the data returned for (len) bytes. */ -static u8 i2c_selectreadbytes (struct lgdt330x_state* state, +static u8 i2c_read_demod_bytes (struct lgdt330x_state* state, enum I2C_REG reg, u8* buf, int len) { u8 wr [] = { reg }; @@ -139,7 +119,7 @@ static u8 i2c_selectreadbytes (struct lgdt330x_state* state, } /* Software reset */ -int lgdt330x_SwReset(struct lgdt330x_state* state) +static int lgdt3302_SwReset(struct lgdt330x_state* state) { u8 ret; u8 reset[] = { @@ -148,23 +128,51 @@ int lgdt330x_SwReset(struct lgdt330x_state* state) * bits 5-0 are 1 to mask interrupts */ }; - ret = i2c_writebytes(state, - state->config->demod_address, + ret = i2c_write_demod_bytes(state, + reset, sizeof(reset)); + if (ret == 0) { + + /* force reset high (inactive) and unmask interrupts */ + reset[1] = 0x7f; + ret = i2c_write_demod_bytes(state, + reset, sizeof(reset)); + } + return ret; +} + +static int lgdt3303_SwReset(struct lgdt330x_state* state) +{ + u8 ret; + u8 reset[] = { + 0x02, + 0x00 /* bit 0 is active low software reset */ + }; + + ret = i2c_write_demod_bytes(state, reset, sizeof(reset)); if (ret == 0) { - /* spec says reset takes 100 ns why wait */ - /* mdelay(100); */ /* keep low for 100mS */ - reset[1] = 0x7f; /* force reset high (inactive) - * and unmask interrupts */ - ret = i2c_writebytes(state, - state->config->demod_address, + + /* force reset high (inactive) */ + reset[1] = 0x01; + ret = i2c_write_demod_bytes(state, reset, sizeof(reset)); } - /* Spec does not indicate a need for this either */ - /*mdelay(5); */ /* wait 5 msec before doing more */ return ret; } +static int lgdt330x_SwReset(struct lgdt330x_state* state) +{ + switch (state->config->demod_chip) { + case LGDT3302: + return lgdt3302_SwReset(state); + case LGDT3303: + return lgdt3303_SwReset(state); + default: + return -ENODEV; + } +} + + static int lgdt330x_init(struct dvb_frontend* fe) { /* Hardware reset is done using gpio[0] of cx23880x chip. @@ -173,22 +181,98 @@ static int lgdt330x_init(struct dvb_frontend* fe) * Maybe there needs to be a callable function in cx88-core or * the caller of this function needs to do it. */ - dprintk("%s entered\n", __FUNCTION__); - return lgdt330x_SwReset((struct lgdt330x_state*) fe->demodulator_priv); + /* + * Array of byte pairs <address, value> + * to initialize each different chip + */ + static u8 lgdt3302_init_data[] = { + /* Use 50MHz parameter values from spec sheet since xtal is 50 */ + /* Change the value of NCOCTFV[25:0] of carrier + recovery center frequency register */ + VSB_CARRIER_FREQ0, 0x00, + VSB_CARRIER_FREQ1, 0x87, + VSB_CARRIER_FREQ2, 0x8e, + VSB_CARRIER_FREQ3, 0x01, + /* Change the TPCLK pin polarity + data is valid on falling clock */ + DEMUX_CONTROL, 0xfb, + /* Change the value of IFBW[11:0] of + AGC IF/RF loop filter bandwidth register */ + AGC_RF_BANDWIDTH0, 0x40, + AGC_RF_BANDWIDTH1, 0x93, + AGC_RF_BANDWIDTH2, 0x00, + /* Change the value of bit 6, 'nINAGCBY' and + 'NSSEL[1:0] of ACG function control register 2 */ + AGC_FUNC_CTRL2, 0xc6, + /* Change the value of bit 6 'RFFIX' + of AGC function control register 3 */ + AGC_FUNC_CTRL3, 0x40, + /* Set the value of 'INLVTHD' register 0x2a/0x2c + to 0x7fe */ + AGC_DELAY0, 0x07, + AGC_DELAY2, 0xfe, + /* Change the value of IAGCBW[15:8] + of inner AGC loop filter bandwith */ + AGC_LOOP_BANDWIDTH0, 0x08, + AGC_LOOP_BANDWIDTH1, 0x9a + }; + + static u8 lgdt3303_init_data[] = { + 0x4c, 0x14 + }; + + struct lgdt330x_state* state = fe->demodulator_priv; + char *chip_name; + int err; + + switch (state->config->demod_chip) { + case LGDT3302: + chip_name = "LGDT3302"; + err = i2c_write_demod_bytes(state, lgdt3302_init_data, + sizeof(lgdt3302_init_data)); + break; + case LGDT3303: + chip_name = "LGDT3303"; + err = i2c_write_demod_bytes(state, lgdt3303_init_data, + sizeof(lgdt3303_init_data)); + break; + default: + chip_name = "undefined"; + printk (KERN_WARNING "Only LGDT3302 and LGDT3303 are supported chips.\n"); + err = -ENODEV; + } + dprintk("%s entered as %s\n", __FUNCTION__, chip_name); + if (err < 0) + return err; + return lgdt330x_SwReset(state); } static int lgdt330x_read_ber(struct dvb_frontend* fe, u32* ber) { - *ber = 0; /* Dummy out for now */ + *ber = 0; /* Not supplied by the demod chips */ return 0; } static int lgdt330x_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks) { - struct lgdt330x_state* state = (struct lgdt330x_state*) fe->demodulator_priv; + struct lgdt330x_state* state = fe->demodulator_priv; + int err; u8 buf[2]; - i2c_selectreadbytes(state, PACKET_ERR_COUNTER1, buf, sizeof(buf)); + switch (state->config->demod_chip) { + case LGDT3302: + err = i2c_read_demod_bytes(state, LGDT3302_PACKET_ERR_COUNTER1, + buf, sizeof(buf)); + break; + case LGDT3303: + err = i2c_read_demod_bytes(state, LGDT3303_PACKET_ERR_COUNTER1, + buf, sizeof(buf)); + break; + default: + printk(KERN_WARNING + "Only LGDT3302 and LGDT3303 are supported chips.\n"); + err = -ENODEV; + } *ucblocks = (buf[0] << 8) | buf[1]; return 0; @@ -197,123 +281,113 @@ static int lgdt330x_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks) static int lgdt330x_set_parameters(struct dvb_frontend* fe, struct dvb_frontend_parameters *param) { - struct lgdt330x_state* state = - (struct lgdt330x_state*) fe->demodulator_priv; + /* + * Array of byte pairs <address, value> + * to initialize 8VSB for lgdt3303 chip 50 MHz IF + */ + static u8 lgdt3303_8vsb_44_data[] = { + 0x04, 0x00, + 0x0d, 0x40, + 0x0e, 0x87, + 0x0f, 0x8e, + 0x10, 0x01, + 0x47, 0x8b }; + + /* + * Array of byte pairs <address, value> + * to initialize QAM for lgdt3303 chip + */ + static u8 lgdt3303_qam_data[] = { + 0x04, 0x00, + 0x0d, 0x00, + 0x0e, 0x00, + 0x0f, 0x00, + 0x10, 0x00, + 0x51, 0x63, + 0x47, 0x66, + 0x48, 0x66, + 0x4d, 0x1a, + 0x49, 0x08, + 0x4a, 0x9b }; + + struct lgdt330x_state* state = fe->demodulator_priv; - /* Use 50MHz parameter values from spec sheet since xtal is 50 */ static u8 top_ctrl_cfg[] = { TOP_CONTROL, 0x03 }; - static u8 vsb_freq_cfg[] = { VSB_CARRIER_FREQ0, 0x00, 0x87, 0x8e, 0x01 }; - static u8 demux_ctrl_cfg[] = { DEMUX_CONTROL, 0xfb }; - static u8 agc_rf_cfg[] = { AGC_RF_BANDWIDTH0, 0x40, 0x93, 0x00 }; - static u8 agc_ctrl_cfg[] = { AGC_FUNC_CTRL2, 0xc6, 0x40 }; - static u8 agc_delay_cfg[] = { AGC_DELAY0, 0x07, 0x00, 0xfe }; - static u8 agc_loop_cfg[] = { AGC_LOOP_BANDWIDTH0, 0x08, 0x9a }; + int err; /* Change only if we are actually changing the modulation */ if (state->current_modulation != param->u.vsb.modulation) { switch(param->u.vsb.modulation) { case VSB_8: dprintk("%s: VSB_8 MODE\n", __FUNCTION__); - /* Select VSB mode and serial MPEG interface */ - top_ctrl_cfg[1] = 0x07; + /* Select VSB mode */ + top_ctrl_cfg[1] = 0x03; /* Select ANT connector if supported by card */ if (state->config->pll_rf_set) state->config->pll_rf_set(fe, 1); + + if (state->config->demod_chip == LGDT3303) { + err = i2c_write_demod_bytes(state, lgdt3303_8vsb_44_data, + sizeof(lgdt3303_8vsb_44_data)); + } break; case QAM_64: dprintk("%s: QAM_64 MODE\n", __FUNCTION__); - /* Select QAM_64 mode and serial MPEG interface */ - top_ctrl_cfg[1] = 0x04; + /* Select QAM_64 mode */ + top_ctrl_cfg[1] = 0x00; /* Select CABLE connector if supported by card */ if (state->config->pll_rf_set) state->config->pll_rf_set(fe, 0); + + if (state->config->demod_chip == LGDT3303) { + err = i2c_write_demod_bytes(state, lgdt3303_qam_data, + sizeof(lgdt3303_qam_data)); + } break; case QAM_256: dprintk("%s: QAM_256 MODE\n", __FUNCTION__); - /* Select QAM_256 mode and serial MPEG interface */ - top_ctrl_cfg[1] = 0x05; + /* Select QAM_256 mode */ + top_ctrl_cfg[1] = 0x01; /* Select CABLE connector if supported by card */ if (state->config->pll_rf_set) state->config->pll_rf_set(fe, 0); + + if (state->config->demod_chip == LGDT3303) { + err = i2c_write_demod_bytes(state, lgdt3303_qam_data, + sizeof(lgdt3303_qam_data)); + } break; default: printk(KERN_WARNING "lgdt330x: %s: Modulation type(%d) UNSUPPORTED\n", __FUNCTION__, param->u.vsb.modulation); return -1; } - /* Initializations common to all modes */ + /* + * select serial or parallel MPEG harware interface + * Serial: 0x04 for LGDT3302 or 0x40 for LGDT3303 + * Parallel: 0x00 + */ + top_ctrl_cfg[1] |= state->config->serial_mpeg; /* Select the requested mode */ - i2c_writebytes(state, state->config->demod_address, - top_ctrl_cfg, sizeof(top_ctrl_cfg)); - - /* Change the value of IFBW[11:0] - of AGC IF/RF loop filter bandwidth register */ - i2c_writebytes(state, state->config->demod_address, - agc_rf_cfg, sizeof(agc_rf_cfg)); - - /* Change the value of bit 6, 'nINAGCBY' and - 'NSSEL[1:0] of ACG function control register 2 */ - /* Change the value of bit 6 'RFFIX' - of AGC function control register 3 */ - i2c_writebytes(state, state->config->demod_address, - agc_ctrl_cfg, sizeof(agc_ctrl_cfg)); - - /* Change the TPCLK pin polarity - data is valid on falling clock */ - i2c_writebytes(state, state->config->demod_address, - demux_ctrl_cfg, sizeof(demux_ctrl_cfg)); - - /* Change the value of NCOCTFV[25:0] of carrier - recovery center frequency register */ - i2c_writebytes(state, state->config->demod_address, - vsb_freq_cfg, sizeof(vsb_freq_cfg)); - - /* Set the value of 'INLVTHD' register 0x2a/0x2c to 0x7fe */ - i2c_writebytes(state, state->config->demod_address, - agc_delay_cfg, sizeof(agc_delay_cfg)); - - /* Change the value of IAGCBW[15:8] - of inner AGC loop filter bandwith */ - i2c_writebytes(state, state->config->demod_address, - agc_loop_cfg, sizeof(agc_loop_cfg)); - + i2c_write_demod_bytes(state, top_ctrl_cfg, + sizeof(top_ctrl_cfg)); state->config->set_ts_params(fe, 0); state->current_modulation = param->u.vsb.modulation; } /* Change only if we are actually changing the channel */ if (state->current_frequency != param->frequency) { - u8 buf[5]; - struct i2c_msg msg = { .flags = 0, .buf = &buf[1], .len = 4 }; - int err; - - state->config->pll_set(fe, param, buf); - msg.addr = buf[0]; - - dprintk("%s: tuner at 0x%02x bytes: 0x%02x 0x%02x " - "0x%02x 0x%02x\n", __FUNCTION__, - buf[0],buf[1],buf[2],buf[3],buf[4]); - if ((err = i2c_transfer(state->i2c, &msg, 1)) != 1) { - printk(KERN_WARNING "lgdt330x: %s error (addr %02x <- %02x, err = %i)\n", __FUNCTION__, buf[0], buf[1], err); - if (err < 0) - return err; - else - return -EREMOTEIO; - } -#if 0 - /* Check the status of the tuner pll */ - i2c_readbytes(state, buf[0], &buf[1], 1); - dprintk("%s: tuner status byte = 0x%02x\n", __FUNCTION__, buf[1]); -#endif - /* Update current frequency */ + /* Tune to the new frequency */ + state->config->pll_set(fe, param); + /* Keep track of the new frequency */ state->current_frequency = param->frequency; } lgdt330x_SwReset(state); @@ -328,21 +402,15 @@ static int lgdt330x_get_frontend(struct dvb_frontend* fe, return 0; } -static int lgdt330x_read_status(struct dvb_frontend* fe, fe_status_t* status) +static int lgdt3302_read_status(struct dvb_frontend* fe, fe_status_t* status) { - struct lgdt330x_state* state = (struct lgdt330x_state*) fe->demodulator_priv; + struct lgdt330x_state* state = fe->demodulator_priv; u8 buf[3]; *status = 0; /* Reset status result */ - /* - * You must set the Mask bits to 1 in the IRQ_MASK in order - * to see that status bit in the IRQ_STATUS register. - * This is done in SwReset(); - */ - /* AGC status register */ - i2c_selectreadbytes(state, AGC_STATUS, buf, 1); + i2c_read_demod_bytes(state, AGC_STATUS, buf, 1); dprintk("%s: AGC_STATUS = 0x%02x\n", __FUNCTION__, buf[0]); if ((buf[0] & 0x0c) == 0x8){ /* Test signal does not exist flag */ @@ -353,16 +421,15 @@ static int lgdt330x_read_status(struct dvb_frontend* fe, fe_status_t* status) return 0; } + /* + * You must set the Mask bits to 1 in the IRQ_MASK in order + * to see that status bit in the IRQ_STATUS register. + * This is done in SwReset(); + */ /* signal status */ - i2c_selectreadbytes(state, TOP_CONTROL, buf, sizeof(buf)); + i2c_read_demod_bytes(state, TOP_CONTROL, buf, sizeof(buf)); dprintk("%s: TOP_CONTROL = 0x%02x, IRO_MASK = 0x%02x, IRQ_STATUS = 0x%02x\n", __FUNCTION__, buf[0], buf[1], buf[2]); -#if 0 - /* Alternative method to check for a signal */ - /* using the SNR good/bad interrupts. */ - if ((buf[2] & 0x30) == 0x10) - *status |= FE_HAS_SIGNAL; -#endif /* sync status */ if ((buf[2] & 0x03) == 0x01) { @@ -376,7 +443,7 @@ static int lgdt330x_read_status(struct dvb_frontend* fe, fe_status_t* status) } /* Carrier Recovery Lock Status Register */ - i2c_selectreadbytes(state, CARRIER_LOCK, buf, 1); + i2c_read_demod_bytes(state, CARRIER_LOCK, buf, 1); dprintk("%s: CARRIER_LOCK = 0x%02x\n", __FUNCTION__, buf[0]); switch (state->current_modulation) { case QAM_256: @@ -396,13 +463,75 @@ static int lgdt330x_read_status(struct dvb_frontend* fe, fe_status_t* status) return 0; } +static int lgdt3303_read_status(struct dvb_frontend* fe, fe_status_t* status) +{ + struct lgdt330x_state* state = fe->demodulator_priv; + int err; + u8 buf[3]; + + *status = 0; /* Reset status result */ + + /* lgdt3303 AGC status register */ + err = i2c_read_demod_bytes(state, 0x58, buf, 1); + if (err < 0) + return err; + + dprintk("%s: AGC_STATUS = 0x%02x\n", __FUNCTION__, buf[0]); + if ((buf[0] & 0x21) == 0x01){ + /* Test input signal does not exist flag */ + /* as well as the AGC lock flag. */ + *status |= FE_HAS_SIGNAL; + } else { + /* Without a signal all other status bits are meaningless */ + return 0; + } + + /* Carrier Recovery Lock Status Register */ + i2c_read_demod_bytes(state, CARRIER_LOCK, buf, 1); + dprintk("%s: CARRIER_LOCK = 0x%02x\n", __FUNCTION__, buf[0]); + switch (state->current_modulation) { + case QAM_256: + case QAM_64: + /* Need to undestand why there are 3 lock levels here */ + if ((buf[0] & 0x07) == 0x07) + *status |= FE_HAS_CARRIER; + else + break; + i2c_read_demod_bytes(state, 0x8a, buf, 1); + if ((buf[0] & 0x04) == 0x04) + *status |= FE_HAS_SYNC; + if ((buf[0] & 0x01) == 0x01) + *status |= FE_HAS_LOCK; + if ((buf[0] & 0x08) == 0x08) + *status |= FE_HAS_VITERBI; + break; + case VSB_8: + if ((buf[0] & 0x80) == 0x80) + *status |= FE_HAS_CARRIER; + else + break; + i2c_read_demod_bytes(state, 0x38, buf, 1); + if ((buf[0] & 0x02) == 0x00) + *status |= FE_HAS_SYNC; + if ((buf[0] & 0x01) == 0x01) { + *status |= FE_HAS_LOCK; + *status |= FE_HAS_VITERBI; + } + break; + default: + printk("KERN_WARNING lgdt330x: %s: Modulation set to unsupported value\n", __FUNCTION__); + } + return 0; +} + static int lgdt330x_read_signal_strength(struct dvb_frontend* fe, u16* strength) { /* not directly available. */ + *strength = 0; return 0; } -static int lgdt330x_read_snr(struct dvb_frontend* fe, u16* snr) +static int lgdt3302_read_snr(struct dvb_frontend* fe, u16* snr) { #ifdef SNR_IN_DB /* @@ -451,7 +580,7 @@ static int lgdt330x_read_snr(struct dvb_frontend* fe, u16* snr) 91, 115, 144, 182, 229, 288, 362, 456, 574, 722, 909, 1144, 1440, 1813, 2282, 2873, 3617, 4553, 5732, 7216, 9084, 11436, 14396, 18124, 22817, 28724, 36161, 45524, 57312, 72151, - 90833, 114351, 143960, 181235, 228161, 0x040000 + 90833, 114351, 143960, 181235, 228161, 0x080000 }; static u8 buf[5];/* read data buffer */ @@ -459,8 +588,8 @@ static int lgdt330x_read_snr(struct dvb_frontend* fe, u16* snr) static u32 snr_db; /* index into SNR_EQ[] */ struct lgdt330x_state* state = (struct lgdt330x_state*) fe->demodulator_priv; - /* read both equalizer and pase tracker noise data */ - i2c_selectreadbytes(state, EQPH_ERR0, buf, sizeof(buf)); + /* read both equalizer and phase tracker noise data */ + i2c_read_demod_bytes(state, EQPH_ERR0, buf, sizeof(buf)); if (state->current_modulation == VSB_8) { /* Equalizer Mean-Square Error Register for VSB */ @@ -496,19 +625,20 @@ static int lgdt330x_read_snr(struct dvb_frontend* fe, u16* snr) struct lgdt330x_state* state = (struct lgdt330x_state*) fe->demodulator_priv; /* read both equalizer and pase tracker noise data */ - i2c_selectreadbytes(state, EQPH_ERR0, buf, sizeof(buf)); + i2c_read_demod_bytes(state, EQPH_ERR0, buf, sizeof(buf)); if (state->current_modulation == VSB_8) { - /* Equalizer Mean-Square Error Register for VSB */ - noise = ((buf[0] & 7) << 16) | (buf[1] << 8) | buf[2]; - } else { - /* Phase Tracker Mean-Square Error Register for QAM */ + /* Phase Tracker Mean-Square Error Register for VSB */ noise = ((buf[0] & 7<<3) << 13) | (buf[3] << 8) | buf[4]; + } else { + + /* Carrier Recovery Mean-Square Error for QAM */ + i2c_read_demod_bytes(state, 0x1a, buf, 2); + noise = ((buf[0] & 3) << 8) | buf[1]; } /* Small values for noise mean signal is better so invert noise */ - /* Noise is 19 bit value so discard 3 LSB*/ - *snr = ~noise>>3; + *snr = ~noise; #endif dprintk("%s: noise = 0x%05x, snr = %idb\n",__FUNCTION__, noise, *snr); @@ -516,6 +646,32 @@ static int lgdt330x_read_snr(struct dvb_frontend* fe, u16* snr) return 0; } +static int lgdt3303_read_snr(struct dvb_frontend* fe, u16* snr) +{ + /* Return the raw noise value */ + static u8 buf[5];/* read data buffer */ + static u32 noise; /* noise value */ + struct lgdt330x_state* state = (struct lgdt330x_state*) fe->demodulator_priv; + + if (state->current_modulation == VSB_8) { + + /* Phase Tracker Mean-Square Error Register for VSB */ + noise = ((buf[0] & 7) << 16) | (buf[3] << 8) | buf[4]; + } else { + + /* Carrier Recovery Mean-Square Error for QAM */ + i2c_read_demod_bytes(state, 0x1a, buf, 2); + noise = (buf[0] << 8) | buf[1]; + } + + /* Small values for noise mean signal is better so invert noise */ + *snr = ~noise; + + dprintk("%s: noise = 0x%05x, snr = %idb\n",__FUNCTION__, noise, *snr); + + return 0; +} + static int lgdt330x_get_tune_settings(struct dvb_frontend* fe, struct dvb_frontend_tune_settings* fe_tune_settings) { /* I have no idea about this - it may not be needed */ @@ -531,7 +687,8 @@ static void lgdt330x_release(struct dvb_frontend* fe) kfree(state); } -static struct dvb_frontend_ops lgdt330x_ops; +static struct dvb_frontend_ops lgdt3302_ops; +static struct dvb_frontend_ops lgdt3303_ops; struct dvb_frontend* lgdt330x_attach(const struct lgdt330x_config* config, struct i2c_adapter* i2c) @@ -548,9 +705,19 @@ struct dvb_frontend* lgdt330x_attach(const struct lgdt330x_config* config, /* Setup the state */ state->config = config; state->i2c = i2c; - memcpy(&state->ops, &lgdt330x_ops, sizeof(struct dvb_frontend_ops)); + switch (config->demod_chip) { + case LGDT3302: + memcpy(&state->ops, &lgdt3302_ops, sizeof(struct dvb_frontend_ops)); + break; + case LGDT3303: + memcpy(&state->ops, &lgdt3303_ops, sizeof(struct dvb_frontend_ops)); + break; + default: + goto error; + } + /* Verify communication with demod chip */ - if (i2c_selectreadbytes(state, 2, buf, 1)) + if (i2c_read_demod_bytes(state, 2, buf, 1)) goto error; state->current_frequency = -1; @@ -568,9 +735,33 @@ error: return NULL; } -static struct dvb_frontend_ops lgdt330x_ops = { +static struct dvb_frontend_ops lgdt3302_ops = { + .info = { + .name= "LG Electronics LGDT3302 VSB/QAM Frontend", + .type = FE_ATSC, + .frequency_min= 54000000, + .frequency_max= 858000000, + .frequency_stepsize= 62500, + /* Symbol rate is for all VSB modes need to check QAM */ + .symbol_rate_min = 10762000, + .symbol_rate_max = 10762000, + .caps = FE_CAN_QAM_64 | FE_CAN_QAM_256 | FE_CAN_8VSB + }, + .init = lgdt330x_init, + .set_frontend = lgdt330x_set_parameters, + .get_frontend = lgdt330x_get_frontend, + .get_tune_settings = lgdt330x_get_tune_settings, + .read_status = lgdt3302_read_status, + .read_ber = lgdt330x_read_ber, + .read_signal_strength = lgdt330x_read_signal_strength, + .read_snr = lgdt3302_read_snr, + .read_ucblocks = lgdt330x_read_ucblocks, + .release = lgdt330x_release, +}; + +static struct dvb_frontend_ops lgdt3303_ops = { .info = { - .name= "LG Electronics lgdt330x VSB/QAM Frontend", + .name= "LG Electronics LGDT3303 VSB/QAM Frontend", .type = FE_ATSC, .frequency_min= 54000000, .frequency_max= 858000000, @@ -584,15 +775,15 @@ static struct dvb_frontend_ops lgdt330x_ops = { .set_frontend = lgdt330x_set_parameters, .get_frontend = lgdt330x_get_frontend, .get_tune_settings = lgdt330x_get_tune_settings, - .read_status = lgdt330x_read_status, + .read_status = lgdt3303_read_status, .read_ber = lgdt330x_read_ber, .read_signal_strength = lgdt330x_read_signal_strength, - .read_snr = lgdt330x_read_snr, + .read_snr = lgdt3303_read_snr, .read_ucblocks = lgdt330x_read_ucblocks, .release = lgdt330x_release, }; -MODULE_DESCRIPTION("lgdt330x [DViCO FusionHDTV 3 Gold] (ATSC 8VSB & ITU-T J.83 AnnexB 64/256 QAM) Demodulator Driver"); +MODULE_DESCRIPTION("LGDT330X (ATSC 8VSB & ITU-T J.83 AnnexB 64/256 QAM) Demodulator Driver"); MODULE_AUTHOR("Wilson Michaels"); MODULE_LICENSE("GPL"); @@ -601,6 +792,5 @@ EXPORT_SYMBOL(lgdt330x_attach); /* * Local variables: * c-basic-offset: 8 - * compile-command: "make DVB=1" * End: */ diff --git a/drivers/media/dvb/frontends/lgdt330x.h b/drivers/media/dvb/frontends/lgdt330x.h index 04986f8e7565..e209ba1e47c5 100644 --- a/drivers/media/dvb/frontends/lgdt330x.h +++ b/drivers/media/dvb/frontends/lgdt330x.h @@ -1,5 +1,5 @@ /* - * Support for LGDT3302 & LGDT3303 (DViCO FustionHDTV Gold) - VSB/QAM + * Support for LGDT3302 and LGDT3303 - VSB/QAM * * Copyright (C) 2005 Wilson Michaels <wilsonmichaels@earthlink.net> * @@ -24,14 +24,26 @@ #include <linux/dvb/frontend.h> +typedef enum lg_chip_t { + UNDEFINED, + LGDT3302, + LGDT3303 +}lg_chip_type; + struct lgdt330x_config { /* The demodulator's i2c address */ u8 demod_address; + /* LG demodulator chip LGDT3302 or LGDT3303 */ + lg_chip_type demod_chip; + + /* MPEG hardware interface - 0:parallel 1:serial */ + int serial_mpeg; + /* PLL interface */ int (*pll_rf_set) (struct dvb_frontend* fe, int index); - int (*pll_set)(struct dvb_frontend* fe, struct dvb_frontend_parameters* params, u8* pll_address); + int (*pll_set)(struct dvb_frontend* fe, struct dvb_frontend_parameters* params); /* Need to set device param for start_dma */ int (*set_ts_params)(struct dvb_frontend* fe, int is_punctured); diff --git a/drivers/media/dvb/frontends/lgdt330x_priv.h b/drivers/media/dvb/frontends/lgdt330x_priv.h index 4143ce8f1a95..59b7c5b9012d 100644 --- a/drivers/media/dvb/frontends/lgdt330x_priv.h +++ b/drivers/media/dvb/frontends/lgdt330x_priv.h @@ -1,5 +1,5 @@ /* - * Support for LGDT3302 & LGDT3303 (DViCO FustionHDTV Gold) - VSB/QAM + * Support for LGDT3302 and LGDT3303 - VSB/QAM * * Copyright (C) 2005 Wilson Michaels <wilsonmichaels@earthlink.net> * @@ -57,8 +57,10 @@ enum I2C_REG { PH_ERR1= 0x4a, PH_ERR2= 0x4b, DEMUX_CONTROL= 0x66, - PACKET_ERR_COUNTER1= 0x6a, - PACKET_ERR_COUNTER2= 0x6b, + LGDT3302_PACKET_ERR_COUNTER1= 0x6a, + LGDT3302_PACKET_ERR_COUNTER2= 0x6b, + LGDT3303_PACKET_ERR_COUNTER1= 0x8b, + LGDT3303_PACKET_ERR_COUNTER2= 0x8c, }; #endif /* _LGDT330X_PRIV_ */ diff --git a/drivers/media/video/cx88/cx88-dvb.c b/drivers/media/video/cx88/cx88-dvb.c index ef0e9a85c359..78d223257a68 100644 --- a/drivers/media/video/cx88/cx88-dvb.c +++ b/drivers/media/video/cx88/cx88-dvb.c @@ -1,5 +1,5 @@ /* - * $Id: cx88-dvb.c,v 1.54 2005/07/25 05:13:50 mkrufky Exp $ + * $Id: cx88-dvb.c,v 1.58 2005/08/07 09:24:08 mkrufky Exp $ * * device driver for Conexant 2388x based TV cards * MPEG Transport Stream (DVB) routines @@ -208,14 +208,26 @@ static struct or51132_config pchdtv_hd3000 = { #ifdef HAVE_LGDT330X static int lgdt330x_pll_set(struct dvb_frontend* fe, - struct dvb_frontend_parameters* params, - u8* pllbuf) + struct dvb_frontend_parameters* params) { struct cx8802_dev *dev= fe->dvb->priv; + u8 buf[4]; + struct i2c_msg msg = + { .addr = dev->core->pll_addr, .flags = 0, .buf = buf, .len = 4 }; + int err; - pllbuf[0] = dev->core->pll_addr; - dvb_pll_configure(dev->core->pll_desc, &pllbuf[1], - params->frequency, 0); + dvb_pll_configure(dev->core->pll_desc, buf, params->frequency, 0); + dprintk(1, "%s: tuner at 0x%02x bytes: 0x%02x 0x%02x 0x%02x 0x%02x\n", + __FUNCTION__, msg.addr, buf[0],buf[1],buf[2],buf[3]); + if ((err = i2c_transfer(&dev->core->i2c_adap, &msg, 1)) != 1) { + printk(KERN_WARNING "cx88-dvb: %s error " + "(addr %02x <- %02x, err = %i)\n", + __FUNCTION__, buf[0], buf[1], err); + if (err < 0) + return err; + else + return -EREMOTEIO; + } return 0; } @@ -244,6 +256,8 @@ static int lgdt330x_set_ts_param(struct dvb_frontend* fe, int is_punctured) static struct lgdt330x_config fusionhdtv_3_gold = { .demod_address = 0x0e, + .demod_chip = LGDT3302, + .serial_mpeg = 0x04, /* TPSERIAL for 3302 in TOP_CONTROL */ .pll_set = lgdt330x_pll_set, .set_ts_params = lgdt330x_set_ts_param, }; diff --git a/drivers/message/i2o/Kconfig b/drivers/message/i2o/Kconfig index 06e8eb19a05c..43a942a29c2e 100644 --- a/drivers/message/i2o/Kconfig +++ b/drivers/message/i2o/Kconfig @@ -53,6 +53,9 @@ config I2O_CONFIG To compile this support as a module, choose M here: the module will be called i2o_config. + Note: If you want to use the new API you have to download the + i2o_config patch from http://i2o.shadowconnect.com/ + config I2O_CONFIG_OLD_IOCTL bool "Enable ioctls (OBSOLETE)" depends on I2O_CONFIG diff --git a/drivers/message/i2o/config-osm.c b/drivers/message/i2o/config-osm.c index fe2e7afc9eae..af32ab4e90cd 100644 --- a/drivers/message/i2o/config-osm.c +++ b/drivers/message/i2o/config-osm.c @@ -30,503 +30,9 @@ static struct i2o_driver i2o_config_driver; -/* Special file operations for sysfs */ -struct fops_attribute { - struct bin_attribute bin; - struct file_operations fops; -}; - -/** - * sysfs_read_dummy - */ -static ssize_t sysfs_read_dummy(struct kobject *kobj, char *buf, loff_t offset, - size_t count) -{ - return 0; -}; - -/** - * sysfs_write_dummy - */ -static ssize_t sysfs_write_dummy(struct kobject *kobj, char *buf, loff_t offset, - size_t count) -{ - return 0; -}; - -/** - * sysfs_create_fops_file - Creates attribute with special file operations - * @kobj: kobject which should contains the attribute - * @attr: attributes which should be used to create file - * - * First creates attribute @attr in kobject @kobj. If it is the first time - * this function is called, merge old fops from sysfs with new one and - * write it back. Afterwords the new fops will be set for the created - * attribute. - * - * Returns 0 on success or negative error code on failure. - */ -static int sysfs_create_fops_file(struct kobject *kobj, - struct fops_attribute *attr) -{ - struct file_operations tmp, *fops; - struct dentry *d; - struct qstr qstr; - int rc; - - fops = &attr->fops; - - if (fops->read) - attr->bin.read = sysfs_read_dummy; - - if (fops->write) - attr->bin.write = sysfs_write_dummy; - - if ((rc = sysfs_create_bin_file(kobj, &attr->bin))) - return rc; - - qstr.name = attr->bin.attr.name; - qstr.len = strlen(qstr.name); - qstr.hash = full_name_hash(qstr.name, qstr.len); - - if ((d = lookup_hash(&qstr, kobj->dentry))) { - if (!fops->owner) { - memcpy(&tmp, d->d_inode->i_fop, sizeof(tmp)); - if (fops->read) - tmp.read = fops->read; - if (fops->write) - tmp.write = fops->write; - memcpy(fops, &tmp, sizeof(tmp)); - } - - d->d_inode->i_fop = fops; - } else - sysfs_remove_bin_file(kobj, &attr->bin); - - return -ENOENT; -}; - -/** - * sysfs_remove_fops_file - Remove attribute with special file operations - * @kobj: kobject which contains the attribute - * @attr: attributes which are used to create file - * - * Only wrapper arround sysfs_remove_bin_file() - * - * Returns 0 on success or negative error code on failure. - */ -static inline int sysfs_remove_fops_file(struct kobject *kobj, - struct fops_attribute *attr) -{ - return sysfs_remove_bin_file(kobj, &attr->bin); -}; - -/** - * i2o_config_read_hrt - Returns the HRT of the controller - * @kob: kernel object handle - * @buf: buffer into which the HRT should be copied - * @off: file offset - * @count: number of bytes to read - * - * Put @count bytes starting at @off into @buf from the HRT of the I2O - * controller corresponding to @kobj. - * - * Returns number of bytes copied into buffer. - */ -static ssize_t i2o_config_read_hrt(struct kobject *kobj, char *buf, - loff_t offset, size_t count) -{ - struct i2o_controller *c = kobj_to_i2o_device(kobj)->iop; - i2o_hrt *hrt = c->hrt.virt; - - u32 size = (hrt->num_entries * hrt->entry_len + 2) * 4; - - if (offset > size) - return 0; - - if (offset + count > size) - count = size - offset; - - memcpy(buf, (u8 *) hrt + offset, count); - - return count; -}; - -/** - * i2o_config_read_lct - Returns the LCT of the controller - * @kob: kernel object handle - * @buf: buffer into which the LCT should be copied - * @off: file offset - * @count: number of bytes to read - * - * Put @count bytes starting at @off into @buf from the LCT of the I2O - * controller corresponding to @kobj. - * - * Returns number of bytes copied into buffer. - */ -static ssize_t i2o_config_read_lct(struct kobject *kobj, char *buf, - loff_t offset, size_t count) -{ - struct i2o_controller *c = kobj_to_i2o_device(kobj)->iop; - u32 size = c->lct->table_size * 4; - - if (offset > size) - return 0; - - if (offset + count > size) - count = size - offset; - - memcpy(buf, (u8 *) c->lct + offset, count); - - return count; -}; - -#define I2O_CONFIG_SW_ATTR(_name,_mode,_type,_swid) \ -static ssize_t i2o_config_##_name##_read(struct file *file, char __user *buf, size_t count, loff_t * offset) { \ - return i2o_config_sw_read(file, buf, count, offset, _type, _swid); \ -};\ -\ -static ssize_t i2o_config_##_name##_write(struct file *file, const char __user *buf, size_t count, loff_t * offset) { \ - return i2o_config_sw_write(file, buf, count, offset, _type, _swid); \ -}; \ -\ -static struct fops_attribute i2o_config_attr_##_name = { \ - .bin = { .attr = { .name = __stringify(_name), .mode = _mode, \ - .owner = THIS_MODULE }, \ - .size = 0, }, \ - .fops = { .write = i2o_config_##_name##_write, \ - .read = i2o_config_##_name##_read} \ -}; - -#ifdef CONFIG_I2O_EXT_ADAPTEC - -/** - * i2o_config_dpt_reagion - Converts type and id to flash region - * @swtype: type of software module reading - * @swid: id of software which should be read - * - * Converts type and id from I2O spec to the matching region for DPT / - * Adaptec controllers. - * - * Returns region which match type and id or -1 on error. - */ -static u32 i2o_config_dpt_region(u8 swtype, u8 swid) -{ - switch (swtype) { - case I2O_SOFTWARE_MODULE_IRTOS: - /* - * content: operation firmware - * region size: - * 0xbc000 for 2554, 3754, 2564, 3757 - * 0x170000 for 2865 - * 0x17c000 for 3966 - */ - if (!swid) - return 0; - - break; - - case I2O_SOFTWARE_MODULE_IOP_PRIVATE: - /* - * content: BIOS and SMOR - * BIOS size: first 0x8000 bytes - * region size: - * 0x40000 for 2554, 3754, 2564, 3757 - * 0x80000 for 2865, 3966 - */ - if (!swid) - return 1; - - break; - - case I2O_SOFTWARE_MODULE_IOP_CONFIG: - switch (swid) { - case 0: - /* - * content: NVRAM defaults - * region size: 0x2000 bytes - */ - return 2; - case 1: - /* - * content: serial number - * region size: 0x2000 bytes - */ - return 3; - } - break; - } - - return -1; -}; - -#endif - -/** - * i2o_config_sw_read - Read a software module from controller - * @file: file pointer - * @buf: buffer into which the data should be copied - * @count: number of bytes to read - * @off: file offset - * @swtype: type of software module reading - * @swid: id of software which should be read - * - * Transfers @count bytes at offset @offset from IOP into buffer using - * type @swtype and id @swid as described in I2O spec. - * - * Returns number of bytes copied into buffer or error code on failure. - */ -static ssize_t i2o_config_sw_read(struct file *file, char __user * buf, - size_t count, loff_t * offset, u8 swtype, - u32 swid) -{ - struct sysfs_dirent *sd = file->f_dentry->d_parent->d_fsdata; - struct kobject *kobj = sd->s_element; - struct i2o_controller *c = kobj_to_i2o_device(kobj)->iop; - u32 m, function = I2O_CMD_SW_UPLOAD; - struct i2o_dma buffer; - struct i2o_message __iomem *msg; - u32 __iomem *mptr; - int rc, status; - - m = i2o_msg_get_wait(c, &msg, I2O_TIMEOUT_MESSAGE_GET); - if (m == I2O_QUEUE_EMPTY) - return -EBUSY; - - mptr = &msg->body[3]; - - if ((rc = i2o_dma_alloc(&c->pdev->dev, &buffer, count, GFP_KERNEL))) { - i2o_msg_nop(c, m); - return rc; - } -#ifdef CONFIG_I2O_EXT_ADAPTEC - if (c->adaptec) { - mptr = &msg->body[4]; - function = I2O_CMD_PRIVATE; - - writel(TEN_WORD_MSG_SIZE | SGL_OFFSET_8, &msg->u.head[0]); - - writel(I2O_VENDOR_DPT << 16 | I2O_DPT_FLASH_READ, - &msg->body[0]); - writel(i2o_config_dpt_region(swtype, swid), &msg->body[1]); - writel(*offset, &msg->body[2]); - writel(count, &msg->body[3]); - } else -#endif - writel(NINE_WORD_MSG_SIZE | SGL_OFFSET_7, &msg->u.head[0]); - - writel(0xD0000000 | count, mptr++); - writel(buffer.phys, mptr); - - writel(function << 24 | HOST_TID << 12 | ADAPTER_TID, &msg->u.head[1]); - writel(i2o_config_driver.context, &msg->u.head[2]); - writel(0, &msg->u.head[3]); - -#ifdef CONFIG_I2O_EXT_ADAPTEC - if (!c->adaptec) -#endif - { - writel((u32) swtype << 16 | (u32) 1 << 8, &msg->body[0]); - writel(0, &msg->body[1]); - writel(swid, &msg->body[2]); - } - - status = i2o_msg_post_wait_mem(c, m, 60, &buffer); - - if (status == I2O_POST_WAIT_OK) { - if (!(rc = copy_to_user(buf, buffer.virt, count))) { - rc = count; - *offset += count; - } - } else - rc = -EIO; - - if (status != -ETIMEDOUT) - i2o_dma_free(&c->pdev->dev, &buffer); - - return rc; -}; - -/** - * i2o_config_sw_write - Write a software module to controller - * @file: file pointer - * @buf: buffer into which the data should be copied - * @count: number of bytes to read - * @off: file offset - * @swtype: type of software module writing - * @swid: id of software which should be written - * - * Transfers @count bytes at offset @offset from buffer to IOP using - * type @swtype and id @swid as described in I2O spec. - * - * Returns number of bytes copied from buffer or error code on failure. - */ -static ssize_t i2o_config_sw_write(struct file *file, const char __user * buf, - size_t count, loff_t * offset, u8 swtype, - u32 swid) -{ - struct sysfs_dirent *sd = file->f_dentry->d_parent->d_fsdata; - struct kobject *kobj = sd->s_element; - struct i2o_controller *c = kobj_to_i2o_device(kobj)->iop; - u32 m, function = I2O_CMD_SW_DOWNLOAD; - struct i2o_dma buffer; - struct i2o_message __iomem *msg; - u32 __iomem *mptr; - int rc, status; - - m = i2o_msg_get_wait(c, &msg, I2O_TIMEOUT_MESSAGE_GET); - if (m == I2O_QUEUE_EMPTY) - return -EBUSY; - - mptr = &msg->body[3]; - - if ((rc = i2o_dma_alloc(&c->pdev->dev, &buffer, count, GFP_KERNEL))) - goto nop_msg; - - if ((rc = copy_from_user(buffer.virt, buf, count))) - goto free_buffer; - -#ifdef CONFIG_I2O_EXT_ADAPTEC - if (c->adaptec) { - mptr = &msg->body[4]; - function = I2O_CMD_PRIVATE; - - writel(TEN_WORD_MSG_SIZE | SGL_OFFSET_8, &msg->u.head[0]); - - writel(I2O_VENDOR_DPT << 16 | I2O_DPT_FLASH_WRITE, - &msg->body[0]); - writel(i2o_config_dpt_region(swtype, swid), &msg->body[1]); - writel(*offset, &msg->body[2]); - writel(count, &msg->body[3]); - } else -#endif - writel(NINE_WORD_MSG_SIZE | SGL_OFFSET_7, &msg->u.head[0]); - - writel(0xD4000000 | count, mptr++); - writel(buffer.phys, mptr); - - writel(function << 24 | HOST_TID << 12 | ADAPTER_TID, &msg->u.head[1]); - writel(i2o_config_driver.context, &msg->u.head[2]); - writel(0, &msg->u.head[3]); - -#ifdef CONFIG_I2O_EXT_ADAPTEC - if (!c->adaptec) -#endif - { - writel((u32) swtype << 16 | (u32) 1 << 8, &msg->body[0]); - writel(0, &msg->body[1]); - writel(swid, &msg->body[2]); - } - - status = i2o_msg_post_wait_mem(c, m, 60, &buffer); - - if (status != -ETIMEDOUT) - i2o_dma_free(&c->pdev->dev, &buffer); - - if (status != I2O_POST_WAIT_OK) - return -EIO; - - *offset += count; - - return count; - - free_buffer: - i2o_dma_free(&c->pdev->dev, &buffer); - - nop_msg: - i2o_msg_nop(c, m); - - return rc; -}; - -/* attribute for HRT in sysfs */ -static struct bin_attribute i2o_config_hrt_attr = { - .attr = { - .name = "hrt", - .mode = S_IRUGO, - .owner = THIS_MODULE}, - .size = 0, - .read = i2o_config_read_hrt -}; - -/* attribute for LCT in sysfs */ -static struct bin_attribute i2o_config_lct_attr = { - .attr = { - .name = "lct", - .mode = S_IRUGO, - .owner = THIS_MODULE}, - .size = 0, - .read = i2o_config_read_lct -}; - -/* IRTOS firmware access */ -I2O_CONFIG_SW_ATTR(irtos, S_IWRSR, I2O_SOFTWARE_MODULE_IRTOS, 0); - -#ifdef CONFIG_I2O_EXT_ADAPTEC - -/* - * attribute for BIOS / SMOR, nvram and serial number access on DPT / Adaptec - * controllers - */ -I2O_CONFIG_SW_ATTR(bios, S_IWRSR, I2O_SOFTWARE_MODULE_IOP_PRIVATE, 0); -I2O_CONFIG_SW_ATTR(nvram, S_IWRSR, I2O_SOFTWARE_MODULE_IOP_CONFIG, 0); -I2O_CONFIG_SW_ATTR(serial, S_IWRSR, I2O_SOFTWARE_MODULE_IOP_CONFIG, 1); - -#endif - -/** - * i2o_config_notify_controller_add - Notify of added controller - * @c: the controller which was added - * - * If a I2O controller is added, we catch the notification to add sysfs - * entries. - */ -static void i2o_config_notify_controller_add(struct i2o_controller *c) -{ - struct kobject *kobj = &c->exec->device.kobj; - - sysfs_create_bin_file(kobj, &i2o_config_hrt_attr); - sysfs_create_bin_file(kobj, &i2o_config_lct_attr); - - sysfs_create_fops_file(kobj, &i2o_config_attr_irtos); -#ifdef CONFIG_I2O_EXT_ADAPTEC - if (c->adaptec) { - sysfs_create_fops_file(kobj, &i2o_config_attr_bios); - sysfs_create_fops_file(kobj, &i2o_config_attr_nvram); - sysfs_create_fops_file(kobj, &i2o_config_attr_serial); - } -#endif -}; - -/** - * i2o_config_notify_controller_remove - Notify of removed controller - * @c: the controller which was removed - * - * If a I2O controller is removed, we catch the notification to remove the - * sysfs entries. - */ -static void i2o_config_notify_controller_remove(struct i2o_controller *c) -{ - struct kobject *kobj = &c->exec->device.kobj; - -#ifdef CONFIG_I2O_EXT_ADAPTEC - if (c->adaptec) { - sysfs_remove_fops_file(kobj, &i2o_config_attr_serial); - sysfs_remove_fops_file(kobj, &i2o_config_attr_nvram); - sysfs_remove_fops_file(kobj, &i2o_config_attr_bios); - } -#endif - sysfs_remove_fops_file(kobj, &i2o_config_attr_irtos); - - sysfs_remove_bin_file(kobj, &i2o_config_lct_attr); - sysfs_remove_bin_file(kobj, &i2o_config_hrt_attr); -}; - /* Config OSM driver struct */ static struct i2o_driver i2o_config_driver = { .name = OSM_NAME, - .notify_controller_add = i2o_config_notify_controller_add, - .notify_controller_remove = i2o_config_notify_controller_remove }; #ifdef CONFIG_I2O_CONFIG_OLD_IOCTL diff --git a/drivers/message/i2o/pci.c b/drivers/message/i2o/pci.c index 7a60fd7be8ad..66c03e882570 100644 --- a/drivers/message/i2o/pci.c +++ b/drivers/message/i2o/pci.c @@ -32,6 +32,8 @@ #include <linux/i2o.h> #include "core.h" +#define OSM_DESCRIPTION "I2O-subsystem" + /* PCI device id table for all I2O controllers */ static struct pci_device_id __devinitdata i2o_pci_ids[] = { {PCI_DEVICE_CLASS(PCI_CLASS_INTELLIGENT_I2O << 8, 0xffff00)}, @@ -66,6 +68,8 @@ static void i2o_pci_free(struct i2o_controller *c) if (c->base.virt) iounmap(c->base.virt); + + pci_release_regions(c->pdev); } /** @@ -84,6 +88,11 @@ static int __devinit i2o_pci_alloc(struct i2o_controller *c) struct device *dev = &pdev->dev; int i; + if (pci_request_regions(pdev, OSM_DESCRIPTION)) { + printk(KERN_ERR "%s: device already claimed\n", c->name); + return -ENODEV; + } + for (i = 0; i < 6; i++) { /* Skip I/O spaces */ if (!(pci_resource_flags(pdev, i) & IORESOURCE_IO)) { @@ -138,6 +147,7 @@ static int __devinit i2o_pci_alloc(struct i2o_controller *c) c->base.virt = ioremap_nocache(c->base.phys, c->base.len); if (!c->base.virt) { printk(KERN_ERR "%s: Unable to map controller.\n", c->name); + i2o_pci_free(c); return -ENOMEM; } diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c index 201a550f0bcc..368b8fb14023 100644 --- a/drivers/net/tg3.c +++ b/drivers/net/tg3.c @@ -66,8 +66,8 @@ #define DRV_MODULE_NAME "tg3" #define PFX DRV_MODULE_NAME ": " -#define DRV_MODULE_VERSION "3.34" -#define DRV_MODULE_RELDATE "July 25, 2005" +#define DRV_MODULE_VERSION "3.35" +#define DRV_MODULE_RELDATE "August 6, 2005" #define TG3_DEF_MAC_MODE 0 #define TG3_DEF_RX_MODE 0 @@ -10421,6 +10421,12 @@ static int __devinit tg3_init_one(struct pci_dev *pdev, tg3_init_coal(tp); + /* Now that we have fully setup the chip, save away a snapshot + * of the PCI config space. We need to restore this after + * GRC_MISC_CFG core clock resets and some resume events. + */ + pci_save_state(tp->pdev); + err = register_netdev(dev); if (err) { printk(KERN_ERR PFX "Cannot register net device, " @@ -10430,12 +10436,6 @@ static int __devinit tg3_init_one(struct pci_dev *pdev, pci_set_drvdata(pdev, dev); - /* Now that we have fully setup the chip, save away a snapshot - * of the PCI config space. We need to restore this after - * GRC_MISC_CFG core clock resets and some resume events. - */ - pci_save_state(tp->pdev); - printk(KERN_INFO "%s: Tigon3 [partno(%s) rev %04x PHY(%s)] (PCI%s:%s:%s) %sBaseT Ethernet ", dev->name, tp->board_part_number, diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index 65ea7d25f691..1b34fc56067e 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -222,37 +222,6 @@ pci_find_parent_resource(const struct pci_dev *dev, struct resource *res) } /** - * pci_restore_bars - restore a devices BAR values (e.g. after wake-up) - * @dev: PCI device to have its BARs restored - * - * Restore the BAR values for a given device, so as to make it - * accessible by its driver. - */ -void -pci_restore_bars(struct pci_dev *dev) -{ - int i, numres; - - switch (dev->hdr_type) { - case PCI_HEADER_TYPE_NORMAL: - numres = 6; - break; - case PCI_HEADER_TYPE_BRIDGE: - numres = 2; - break; - case PCI_HEADER_TYPE_CARDBUS: - numres = 1; - break; - default: - /* Should never get here, but just in case... */ - return; - } - - for (i = 0; i < numres; i ++) - pci_update_resource(dev, &dev->resource[i], i); -} - -/** * pci_set_power_state - Set the power state of a PCI device * @dev: PCI device to be suspended * @state: PCI power state (D0, D1, D2, D3hot, D3cold) we're entering @@ -270,7 +239,7 @@ int (*platform_pci_set_power_state)(struct pci_dev *dev, pci_power_t t); int pci_set_power_state(struct pci_dev *dev, pci_power_t state) { - int pm, need_restore = 0; + int pm; u16 pmcsr, pmc; /* bound the state we're entering */ @@ -309,17 +278,14 @@ pci_set_power_state(struct pci_dev *dev, pci_power_t state) return -EIO; } - pci_read_config_word(dev, pm + PCI_PM_CTRL, &pmcsr); - /* If we're in D3, force entire word to 0. * This doesn't affect PME_Status, disables PME_En, and * sets PowerState to 0. */ - if (dev->current_state >= PCI_D3hot) { - if (!(pmcsr & PCI_PM_CTRL_NO_SOFT_RESET)) - need_restore = 1; + if (dev->current_state >= PCI_D3hot) pmcsr = 0; - } else { + else { + pci_read_config_word(dev, pm + PCI_PM_CTRL, &pmcsr); pmcsr &= ~PCI_PM_CTRL_STATE_MASK; pmcsr |= state; } @@ -342,22 +308,6 @@ pci_set_power_state(struct pci_dev *dev, pci_power_t state) platform_pci_set_power_state(dev, state); dev->current_state = state; - - /* According to section 5.4.1 of the "PCI BUS POWER MANAGEMENT - * INTERFACE SPECIFICATION, REV. 1.2", a device transitioning - * from D3hot to D0 _may_ perform an internal reset, thereby - * going to "D0 Uninitialized" rather than "D0 Initialized". - * For example, at least some versions of the 3c905B and the - * 3c556B exhibit this behaviour. - * - * At least some laptop BIOSen (e.g. the Thinkpad T21) leave - * devices in a D3hot state at boot. Consequently, we need to - * restore at least the BARs so that the device will be - * accessible to its driver. - */ - if (need_restore) - pci_restore_bars(dev); - return 0; } @@ -855,7 +805,6 @@ struct pci_dev *isa_bridge; EXPORT_SYMBOL(isa_bridge); #endif -EXPORT_SYMBOL_GPL(pci_restore_bars); EXPORT_SYMBOL(pci_enable_device_bars); EXPORT_SYMBOL(pci_enable_device); EXPORT_SYMBOL(pci_disable_device); diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index 8d0968bd527e..a9160ad16581 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -373,6 +373,25 @@ static void __devinit quirk_vt82c686_acpi(struct pci_dev *dev) } DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686_4, quirk_vt82c686_acpi ); +/* + * VIA VT8235 ISA Bridge: Two IO regions pointed to by words at + * 0x88 (128 bytes of power management registers) + * 0xd0 (16 bytes of SMB registers) + */ +static void __devinit quirk_vt8235_acpi(struct pci_dev *dev) +{ + u16 pm, smb; + + pci_read_config_word(dev, 0x88, &pm); + pm &= PCI_BASE_ADDRESS_IO_MASK; + quirk_io_region(dev, pm, 128, PCI_BRIDGE_RESOURCES); + + pci_read_config_word(dev, 0xd0, &smb); + smb &= PCI_BASE_ADDRESS_IO_MASK; + quirk_io_region(dev, smb, 16, PCI_BRIDGE_RESOURCES + 1); +} +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8235, quirk_vt8235_acpi); + #ifdef CONFIG_X86_IO_APIC diff --git a/drivers/pci/setup-res.c b/drivers/pci/setup-res.c index 589486704ce3..84eedc965688 100644 --- a/drivers/pci/setup-res.c +++ b/drivers/pci/setup-res.c @@ -26,7 +26,7 @@ #include "pci.h" -void +static void pci_update_resource(struct pci_dev *dev, struct resource *res, int resno) { struct pci_bus_region region; diff --git a/drivers/s390/net/qeth_main.c b/drivers/s390/net/qeth_main.c index 8f4d2999af8e..79c74f3a11f5 100644 --- a/drivers/s390/net/qeth_main.c +++ b/drivers/s390/net/qeth_main.c @@ -8120,20 +8120,22 @@ static struct notifier_block qeth_ip6_notifier = { #endif static int -qeth_reboot_event(struct notifier_block *this, unsigned long event, void *ptr) +__qeth_reboot_event_card(struct device *dev, void *data) { - - struct device *entry; struct qeth_card *card; - down_read(&qeth_ccwgroup_driver.driver.bus->subsys.rwsem); - list_for_each_entry(entry, &qeth_ccwgroup_driver.driver.devices, - driver_list) { - card = (struct qeth_card *) entry->driver_data; - qeth_clear_ip_list(card, 0, 0); - qeth_qdio_clear_card(card, 0); - } - up_read(&qeth_ccwgroup_driver.driver.bus->subsys.rwsem); + card = (struct qeth_card *) dev->driver_data; + qeth_clear_ip_list(card, 0, 0); + qeth_qdio_clear_card(card, 0); + return 0; +} + +static int +qeth_reboot_event(struct notifier_block *this, unsigned long event, void *ptr) +{ + + driver_for_each_device(&qeth_ccwgroup_driver.driver, NULL, NULL, + __qeth_reboot_event_card); return NOTIFY_DONE; } diff --git a/drivers/s390/net/qeth_proc.c b/drivers/s390/net/qeth_proc.c index 04719196fd20..f2ccfea8fdb8 100644 --- a/drivers/s390/net/qeth_proc.c +++ b/drivers/s390/net/qeth_proc.c @@ -27,23 +27,33 @@ const char *VERSION_QETH_PROC_C = "$Revision: 1.13 $"; #define QETH_PROCFILE_NAME "qeth" static struct proc_dir_entry *qeth_procfile; +static int +qeth_procfile_seq_match(struct device *dev, void *data) +{ + return 1; +} + static void * qeth_procfile_seq_start(struct seq_file *s, loff_t *offset) { - struct list_head *next_card = NULL; - int i = 0; + struct device *dev; + loff_t nr; down_read(&qeth_ccwgroup_driver.driver.bus->subsys.rwsem); - if (*offset == 0) + nr = *offset; + if (nr == 0) return SEQ_START_TOKEN; - /* get card at pos *offset */ - list_for_each(next_card, &qeth_ccwgroup_driver.driver.devices) - if (++i == *offset) - return next_card; + dev = driver_find_device(&qeth_ccwgroup_driver.driver, NULL, + NULL, qeth_procfile_seq_match); - return NULL; + /* get card at pos *offset */ + nr = *offset; + while (nr-- > 1 && dev) + dev = driver_find_device(&qeth_ccwgroup_driver.driver, dev, + NULL, qeth_procfile_seq_match); + return (void *) dev; } static void @@ -55,23 +65,21 @@ qeth_procfile_seq_stop(struct seq_file *s, void* it) static void * qeth_procfile_seq_next(struct seq_file *s, void *it, loff_t *offset) { - struct list_head *next_card = NULL; - struct list_head *current_card; + struct device *prev, *next; if (it == SEQ_START_TOKEN) { - next_card = qeth_ccwgroup_driver.driver.devices.next; - if (next_card->next == next_card) /* list empty */ - return NULL; - (*offset)++; - } else { - current_card = (struct list_head *)it; - if (current_card->next == &qeth_ccwgroup_driver.driver.devices) - return NULL; /* end of list reached */ - next_card = current_card->next; - (*offset)++; + next = driver_find_device(&qeth_ccwgroup_driver.driver, + NULL, NULL, qeth_procfile_seq_match); + if (next) + (*offset)++; + return (void *) next; } - - return next_card; + prev = (struct device *) it; + next = driver_find_device(&qeth_ccwgroup_driver.driver, + prev, NULL, qeth_procfile_seq_match); + if (next) + (*offset)++; + return (void *) next; } static inline const char * @@ -126,7 +134,7 @@ qeth_procfile_seq_show(struct seq_file *s, void *it) "-------------- ---- ------ ---------- ---- " "---- ----- -----\n"); } else { - device = list_entry(it, struct device, driver_list); + device = (struct device *) it; card = device->driver_data; seq_printf(s, "%s/%s/%s x%02X %-10s %-14s %-4i ", CARD_RDEV_ID(card), @@ -180,17 +188,20 @@ static struct proc_dir_entry *qeth_perf_procfile; static void * qeth_perf_procfile_seq_start(struct seq_file *s, loff_t *offset) { - struct list_head *next_card = NULL; - int i = 0; + struct device *dev = NULL; + int nr; down_read(&qeth_ccwgroup_driver.driver.bus->subsys.rwsem); /* get card at pos *offset */ - list_for_each(next_card, &qeth_ccwgroup_driver.driver.devices){ - if (i == *offset) - return next_card; - i++; - } - return NULL; + dev = driver_find_device(&qeth_ccwgroup_driver.driver, NULL, NULL, + qeth_procfile_seq_match); + + /* get card at pos *offset */ + nr = *offset; + while (nr-- > 1 && dev) + dev = driver_find_device(&qeth_ccwgroup_driver.driver, dev, + NULL, qeth_procfile_seq_match); + return (void *) dev; } static void @@ -202,12 +213,14 @@ qeth_perf_procfile_seq_stop(struct seq_file *s, void* it) static void * qeth_perf_procfile_seq_next(struct seq_file *s, void *it, loff_t *offset) { - struct list_head *current_card = (struct list_head *)it; + struct device *prev, *next; - if (current_card->next == &qeth_ccwgroup_driver.driver.devices) - return NULL; /* end of list reached */ - (*offset)++; - return current_card->next; + prev = (struct device *) it; + next = driver_find_device(&qeth_ccwgroup_driver.driver, prev, + NULL, qeth_procfile_seq_match); + if (next) + (*offset)++; + return (void *) next; } static int @@ -216,7 +229,7 @@ qeth_perf_procfile_seq_show(struct seq_file *s, void *it) struct device *device; struct qeth_card *card; - device = list_entry(it, struct device, driver_list); + device = (struct device *) it; card = device->driver_data; seq_printf(s, "For card with devnos %s/%s/%s (%s):\n", CARD_RDEV_ID(card), @@ -318,8 +331,8 @@ static struct proc_dir_entry *qeth_ipato_procfile; static void * qeth_ipato_procfile_seq_start(struct seq_file *s, loff_t *offset) { - struct list_head *next_card = NULL; - int i = 0; + struct device *dev; + loff_t nr; down_read(&qeth_ccwgroup_driver.driver.bus->subsys.rwsem); /* TODO: finish this */ @@ -328,13 +341,16 @@ qeth_ipato_procfile_seq_start(struct seq_file *s, loff_t *offset) * output driver settings then; * else output setting for respective card */ + + dev = driver_find_device(&qeth_ccwgroup_driver.driver, NULL, NULL, + qeth_procfile_seq_match); + /* get card at pos *offset */ - list_for_each(next_card, &qeth_ccwgroup_driver.driver.devices){ - if (i == *offset) - return next_card; - i++; - } - return NULL; + nr = *offset; + while (nr-- > 1 && dev) + dev = driver_find_device(&qeth_ccwgroup_driver.driver, dev, + NULL, qeth_procfile_seq_match); + return (void *) dev; } static void @@ -346,18 +362,14 @@ qeth_ipato_procfile_seq_stop(struct seq_file *s, void* it) static void * qeth_ipato_procfile_seq_next(struct seq_file *s, void *it, loff_t *offset) { - struct list_head *current_card = (struct list_head *)it; + struct device *prev, *next; - /* TODO: finish this */ - /* - * maybe SEQ_SATRT_TOKEN can be returned for offset 0 - * output driver settings then; - * else output setting for respective card - */ - if (current_card->next == &qeth_ccwgroup_driver.driver.devices) - return NULL; /* end of list reached */ - (*offset)++; - return current_card->next; + prev = (struct device *) it; + next = driver_find_device(&qeth_ccwgroup_driver.driver, prev, + NULL, qeth_procfile_seq_match); + if (next) + (*offset)++; + return (void *) next; } static int @@ -372,7 +384,7 @@ qeth_ipato_procfile_seq_show(struct seq_file *s, void *it) * output driver settings then; * else output setting for respective card */ - device = list_entry(it, struct device, driver_list); + device = (struct device *) it; card = device->driver_data; return 0; diff --git a/drivers/sbus/char/bbc_envctrl.c b/drivers/sbus/char/bbc_envctrl.c index b8a2c7353b0a..d44205d52bf3 100644 --- a/drivers/sbus/char/bbc_envctrl.c +++ b/drivers/sbus/char/bbc_envctrl.c @@ -7,6 +7,7 @@ #define __KERNEL_SYSCALLS__ #include <linux/kernel.h> +#include <linux/kthread.h> #include <linux/sched.h> #include <linux/slab.h> #include <linux/delay.h> @@ -459,10 +460,6 @@ static struct task_struct *kenvctrld_task; static int kenvctrld(void *__unused) { - daemonize("kenvctrld"); - allow_signal(SIGKILL); - kenvctrld_task = current; - printk(KERN_INFO "bbc_envctrl: kenvctrld starting...\n"); last_warning_jiffies = jiffies - WARN_INTERVAL; for (;;) { @@ -470,7 +467,7 @@ static int kenvctrld(void *__unused) struct bbc_fan_control *fp; msleep_interruptible(POLL_INTERVAL); - if (signal_pending(current)) + if (kthread_should_stop()) break; for (tp = all_bbc_temps; tp; tp = tp->next) { @@ -577,7 +574,6 @@ int bbc_envctrl_init(void) int temp_index = 0; int fan_index = 0; int devidx = 0; - int err = 0; while ((echild = bbc_i2c_getdev(devidx++)) != NULL) { if (!strcmp(echild->prom_name, "temperature")) @@ -585,9 +581,13 @@ int bbc_envctrl_init(void) if (!strcmp(echild->prom_name, "fan-control")) attach_one_fan(echild, fan_index++); } - if (temp_index != 0 && fan_index != 0) - err = kernel_thread(kenvctrld, NULL, CLONE_FS | CLONE_FILES); - return err; + if (temp_index != 0 && fan_index != 0) { + kenvctrld_task = kthread_run(kenvctrld, NULL, "kenvctrld"); + if (IS_ERR(kenvctrld_task)) + return PTR_ERR(kenvctrld_task); + } + + return 0; } static void destroy_one_temp(struct bbc_cpu_temperature *tp) @@ -607,26 +607,7 @@ void bbc_envctrl_cleanup(void) struct bbc_cpu_temperature *tp; struct bbc_fan_control *fp; - if (kenvctrld_task != NULL) { - force_sig(SIGKILL, kenvctrld_task); - for (;;) { - struct task_struct *p; - int found = 0; - - read_lock(&tasklist_lock); - for_each_process(p) { - if (p == kenvctrld_task) { - found = 1; - break; - } - } - read_unlock(&tasklist_lock); - if (!found) - break; - msleep(1000); - } - kenvctrld_task = NULL; - } + kthread_stop(kenvctrld_task); tp = all_bbc_temps; while (tp != NULL) { diff --git a/drivers/sbus/char/envctrl.c b/drivers/sbus/char/envctrl.c index 9a8c572554f5..d765cc1bf060 100644 --- a/drivers/sbus/char/envctrl.c +++ b/drivers/sbus/char/envctrl.c @@ -24,6 +24,7 @@ #include <linux/config.h> #include <linux/module.h> #include <linux/sched.h> +#include <linux/kthread.h> #include <linux/errno.h> #include <linux/delay.h> #include <linux/ioport.h> @@ -1010,16 +1011,13 @@ static int kenvctrld(void *__unused) poll_interval = 5000; /* TODO env_mon_interval */ - daemonize("kenvctrld"); - allow_signal(SIGKILL); - - kenvctrld_task = current; - printk(KERN_INFO "envctrl: %s starting...\n", current->comm); for (;;) { - if(msleep_interruptible(poll_interval)) - break; + msleep_interruptible(poll_interval); + if (kthread_should_stop()) + break; + for (whichcpu = 0; whichcpu < ENVCTRL_MAX_CPU; ++whichcpu) { if (0 < envctrl_read_cpu_info(whichcpu, cputemp, ENVCTRL_CPUTEMP_MON, @@ -1041,7 +1039,6 @@ static int kenvctrld(void *__unused) static int __init envctrl_init(void) { -#ifdef CONFIG_PCI struct linux_ebus *ebus = NULL; struct linux_ebus_device *edev = NULL; struct linux_ebus_child *edev_child = NULL; @@ -1118,9 +1115,11 @@ done: i2c_childlist[i].addr, (0 == i) ? ("\n") : (" ")); } - err = kernel_thread(kenvctrld, NULL, CLONE_FS | CLONE_FILES); - if (err < 0) + kenvctrld_task = kthread_run(kenvctrld, NULL, "kenvctrld"); + if (IS_ERR(kenvctrld_task)) { + err = PTR_ERR(kenvctrld_task); goto out_deregister; + } return 0; @@ -1133,37 +1132,13 @@ out_iounmap: kfree(i2c_childlist[i].tables); } return err; -#else - return -ENODEV; -#endif } static void __exit envctrl_cleanup(void) { int i; - if (NULL != kenvctrld_task) { - force_sig(SIGKILL, kenvctrld_task); - for (;;) { - struct task_struct *p; - int found = 0; - - read_lock(&tasklist_lock); - for_each_process(p) { - if (p == kenvctrld_task) { - found = 1; - break; - } - } - read_unlock(&tasklist_lock); - - if (!found) - break; - - msleep(1000); - } - kenvctrld_task = NULL; - } + kthread_stop(kenvctrld_task); iounmap(i2c); misc_deregister(&envctrl_dev); diff --git a/drivers/serial/cpm_uart/cpm_uart.h b/drivers/serial/cpm_uart/cpm_uart.h index 5f6187baad86..73c8a088c160 100644 --- a/drivers/serial/cpm_uart/cpm_uart.h +++ b/drivers/serial/cpm_uart/cpm_uart.h @@ -40,13 +40,15 @@ #define TX_NUM_FIFO 4 #define TX_BUF_SIZE 32 +#define SCC_WAIT_CLOSING 100 + struct uart_cpm_port { struct uart_port port; - u16 rx_nrfifos; + u16 rx_nrfifos; u16 rx_fifosize; - u16 tx_nrfifos; + u16 tx_nrfifos; u16 tx_fifosize; - smc_t *smcp; + smc_t *smcp; smc_uart_t *smcup; scc_t *sccp; scc_uart_t *sccup; @@ -67,6 +69,8 @@ struct uart_cpm_port { int bits; /* Keep track of 'odd' SMC2 wirings */ int is_portb; + /* wait on close if needed */ + int wait_closing; }; extern int cpm_uart_port_map[UART_NR]; diff --git a/drivers/serial/cpm_uart/cpm_uart_core.c b/drivers/serial/cpm_uart/cpm_uart_core.c index 29db677d4284..d639ac92a117 100644 --- a/drivers/serial/cpm_uart/cpm_uart_core.c +++ b/drivers/serial/cpm_uart/cpm_uart_core.c @@ -9,9 +9,10 @@ * * Maintainer: Kumar Gala (kumar.gala@freescale.com) (CPM2) * Pantelis Antoniou (panto@intracom.gr) (CPM1) - * + * * Copyright (C) 2004 Freescale Semiconductor, Inc. * (C) 2004 Intracom, S.A. + * (C) 2005 MontaVista Software, Inc. by Vitaly Bordug <vbordug@ru.mvista.com> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -70,8 +71,22 @@ static void cpm_uart_initbd(struct uart_cpm_port *pinfo); /**************************************************************/ +static inline unsigned long cpu2cpm_addr(void *addr) +{ + if ((unsigned long)addr >= CPM_ADDR) + return (unsigned long)addr; + return virt_to_bus(addr); +} + +static inline void *cpm2cpu_addr(unsigned long addr) +{ + if (addr >= CPM_ADDR) + return (void *)addr; + return bus_to_virt(addr); +} + /* - * Check, if transmit buffers are processed + * Check, if transmit buffers are processed */ static unsigned int cpm_uart_tx_empty(struct uart_port *port) { @@ -143,15 +158,18 @@ static void cpm_uart_start_tx(struct uart_port *port, unsigned int tty_start) } if (cpm_uart_tx_pump(port) != 0) { - if (IS_SMC(pinfo)) + if (IS_SMC(pinfo)) { smcp->smc_smcm |= SMCM_TX; - else + smcp->smc_smcmr |= SMCMR_TEN; + } else { sccp->scc_sccm |= UART_SCCM_TX; + pinfo->sccp->scc_gsmrl |= SCC_GSMRL_ENT; + } } } /* - * Stop receiver + * Stop receiver */ static void cpm_uart_stop_rx(struct uart_port *port) { @@ -176,7 +194,7 @@ static void cpm_uart_enable_ms(struct uart_port *port) } /* - * Generate a break. + * Generate a break. */ static void cpm_uart_break_ctl(struct uart_port *port, int break_state) { @@ -231,7 +249,7 @@ static void cpm_uart_int_rx(struct uart_port *port, struct pt_regs *regs) /* get number of characters, and check spce in flip-buffer */ i = bdp->cbd_datlen; - /* If we have not enough room in tty flip buffer, then we try + /* If we have not enough room in tty flip buffer, then we try * later, which will be the next rx-interrupt or a timeout */ if ((tty->flip.count + i) >= TTY_FLIPBUF_SIZE) { @@ -243,7 +261,7 @@ static void cpm_uart_int_rx(struct uart_port *port, struct pt_regs *regs) } /* get pointer */ - cp = (unsigned char *)bus_to_virt(bdp->cbd_bufaddr); + cp = cpm2cpu_addr(bdp->cbd_bufaddr); /* loop through the buffer */ while (i-- > 0) { @@ -265,13 +283,14 @@ static void cpm_uart_int_rx(struct uart_port *port, struct pt_regs *regs) } /* End while (i--) */ /* This BD is ready to be used again. Clear status. get next */ - bdp->cbd_sc &= ~(BD_SC_BR | BD_SC_FR | BD_SC_PR | BD_SC_OV); + bdp->cbd_sc &= ~(BD_SC_BR | BD_SC_FR | BD_SC_PR | BD_SC_OV | BD_SC_ID); bdp->cbd_sc |= BD_SC_EMPTY; if (bdp->cbd_sc & BD_SC_WRAP) bdp = pinfo->rx_bd_base; else bdp++; + } /* End for (;;) */ /* Write back buffer pointer */ @@ -336,22 +355,22 @@ static irqreturn_t cpm_uart_int(int irq, void *data, struct pt_regs *regs) if (IS_SMC(pinfo)) { events = smcp->smc_smce; + smcp->smc_smce = events; if (events & SMCM_BRKE) uart_handle_break(port); if (events & SMCM_RX) cpm_uart_int_rx(port, regs); if (events & SMCM_TX) cpm_uart_int_tx(port, regs); - smcp->smc_smce = events; } else { events = sccp->scc_scce; + sccp->scc_scce = events; if (events & UART_SCCM_BRKE) uart_handle_break(port); if (events & UART_SCCM_RX) cpm_uart_int_rx(port, regs); if (events & UART_SCCM_TX) cpm_uart_int_tx(port, regs); - sccp->scc_scce = events; } return (events) ? IRQ_HANDLED : IRQ_NONE; } @@ -360,6 +379,7 @@ static int cpm_uart_startup(struct uart_port *port) { int retval; struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port; + int line = pinfo - cpm_uart_ports; pr_debug("CPM uart[%d]:startup\n", port->line); @@ -376,9 +396,19 @@ static int cpm_uart_startup(struct uart_port *port) pinfo->sccp->scc_sccm |= UART_SCCM_RX; } + if (!(pinfo->flags & FLAG_CONSOLE)) + cpm_line_cr_cmd(line,CPM_CR_INIT_TRX); return 0; } +inline void cpm_uart_wait_until_send(struct uart_cpm_port *pinfo) +{ + unsigned long target_jiffies = jiffies + pinfo->wait_closing; + + while (!time_after(jiffies, target_jiffies)) + schedule(); +} + /* * Shutdown the uart */ @@ -394,6 +424,12 @@ static void cpm_uart_shutdown(struct uart_port *port) /* If the port is not the console, disable Rx and Tx. */ if (!(pinfo->flags & FLAG_CONSOLE)) { + /* Wait for all the BDs marked sent */ + while(!cpm_uart_tx_empty(port)) + schedule_timeout(2); + if(pinfo->wait_closing) + cpm_uart_wait_until_send(pinfo); + /* Stop uarts */ if (IS_SMC(pinfo)) { volatile smc_t *smcp = pinfo->smcp; @@ -502,7 +538,7 @@ static void cpm_uart_set_termios(struct uart_port *port, */ if ((termios->c_cflag & CREAD) == 0) port->read_status_mask &= ~BD_SC_EMPTY; - + spin_lock_irqsave(&port->lock, flags); /* Start bit has not been added (so don't, because we would just @@ -569,7 +605,8 @@ static int cpm_uart_tx_pump(struct uart_port *port) /* Pick next descriptor and fill from buffer */ bdp = pinfo->tx_cur; - p = bus_to_virt(bdp->cbd_bufaddr); + p = cpm2cpu_addr(bdp->cbd_bufaddr); + *p++ = xmit->buf[xmit->tail]; bdp->cbd_datlen = 1; bdp->cbd_sc |= BD_SC_READY; @@ -595,7 +632,7 @@ static int cpm_uart_tx_pump(struct uart_port *port) while (!(bdp->cbd_sc & BD_SC_READY) && (xmit->tail != xmit->head)) { count = 0; - p = bus_to_virt(bdp->cbd_bufaddr); + p = cpm2cpu_addr(bdp->cbd_bufaddr); while (count < pinfo->tx_fifosize) { *p++ = xmit->buf[xmit->tail]; xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); @@ -606,6 +643,7 @@ static int cpm_uart_tx_pump(struct uart_port *port) } bdp->cbd_datlen = count; bdp->cbd_sc |= BD_SC_READY; + __asm__("eieio"); /* Get next BD. */ if (bdp->cbd_sc & BD_SC_WRAP) bdp = pinfo->tx_bd_base; @@ -643,12 +681,12 @@ static void cpm_uart_initbd(struct uart_cpm_port *pinfo) mem_addr = pinfo->mem_addr; bdp = pinfo->rx_cur = pinfo->rx_bd_base; for (i = 0; i < (pinfo->rx_nrfifos - 1); i++, bdp++) { - bdp->cbd_bufaddr = virt_to_bus(mem_addr); + bdp->cbd_bufaddr = cpu2cpm_addr(mem_addr); bdp->cbd_sc = BD_SC_EMPTY | BD_SC_INTRPT; mem_addr += pinfo->rx_fifosize; } - - bdp->cbd_bufaddr = virt_to_bus(mem_addr); + + bdp->cbd_bufaddr = cpu2cpm_addr(mem_addr); bdp->cbd_sc = BD_SC_WRAP | BD_SC_EMPTY | BD_SC_INTRPT; /* Set the physical address of the host memory @@ -658,12 +696,12 @@ static void cpm_uart_initbd(struct uart_cpm_port *pinfo) mem_addr = pinfo->mem_addr + L1_CACHE_ALIGN(pinfo->rx_nrfifos * pinfo->rx_fifosize); bdp = pinfo->tx_cur = pinfo->tx_bd_base; for (i = 0; i < (pinfo->tx_nrfifos - 1); i++, bdp++) { - bdp->cbd_bufaddr = virt_to_bus(mem_addr); + bdp->cbd_bufaddr = cpu2cpm_addr(mem_addr); bdp->cbd_sc = BD_SC_INTRPT; mem_addr += pinfo->tx_fifosize; } - - bdp->cbd_bufaddr = virt_to_bus(mem_addr); + + bdp->cbd_bufaddr = cpu2cpm_addr(mem_addr); bdp->cbd_sc = BD_SC_WRAP | BD_SC_INTRPT; } @@ -763,6 +801,8 @@ static void cpm_uart_init_smc(struct uart_cpm_port *pinfo) /* Using idle charater time requires some additional tuning. */ up->smc_mrblr = pinfo->rx_fifosize; up->smc_maxidl = pinfo->rx_fifosize; + up->smc_brklen = 0; + up->smc_brkec = 0; up->smc_brkcr = 1; cpm_line_cr_cmd(line, CPM_CR_INIT_TRX); @@ -796,7 +836,7 @@ static int cpm_uart_request_port(struct uart_port *port) /* * Setup any port IO, connect any baud rate generators, * etc. This is expected to be handled by board - * dependant code + * dependant code */ if (pinfo->set_lineif) pinfo->set_lineif(pinfo); @@ -815,6 +855,10 @@ static int cpm_uart_request_port(struct uart_port *port) return ret; cpm_uart_initbd(pinfo); + if (IS_SMC(pinfo)) + cpm_uart_init_smc(pinfo); + else + cpm_uart_init_scc(pinfo); return 0; } @@ -869,7 +913,7 @@ struct uart_cpm_port cpm_uart_ports[UART_NR] = { .flags = FLAG_SMC, .tx_nrfifos = TX_NUM_FIFO, .tx_fifosize = TX_BUF_SIZE, - .rx_nrfifos = RX_NUM_FIFO, + .rx_nrfifos = RX_NUM_FIFO, .rx_fifosize = RX_BUF_SIZE, .set_lineif = smc1_lineif, }, @@ -883,7 +927,7 @@ struct uart_cpm_port cpm_uart_ports[UART_NR] = { .flags = FLAG_SMC, .tx_nrfifos = TX_NUM_FIFO, .tx_fifosize = TX_BUF_SIZE, - .rx_nrfifos = RX_NUM_FIFO, + .rx_nrfifos = RX_NUM_FIFO, .rx_fifosize = RX_BUF_SIZE, .set_lineif = smc2_lineif, #ifdef CONFIG_SERIAL_CPM_ALT_SMC2 @@ -899,9 +943,10 @@ struct uart_cpm_port cpm_uart_ports[UART_NR] = { }, .tx_nrfifos = TX_NUM_FIFO, .tx_fifosize = TX_BUF_SIZE, - .rx_nrfifos = RX_NUM_FIFO, + .rx_nrfifos = RX_NUM_FIFO, .rx_fifosize = RX_BUF_SIZE, .set_lineif = scc1_lineif, + .wait_closing = SCC_WAIT_CLOSING, }, [UART_SCC2] = { .port = { @@ -912,9 +957,10 @@ struct uart_cpm_port cpm_uart_ports[UART_NR] = { }, .tx_nrfifos = TX_NUM_FIFO, .tx_fifosize = TX_BUF_SIZE, - .rx_nrfifos = RX_NUM_FIFO, + .rx_nrfifos = RX_NUM_FIFO, .rx_fifosize = RX_BUF_SIZE, .set_lineif = scc2_lineif, + .wait_closing = SCC_WAIT_CLOSING, }, [UART_SCC3] = { .port = { @@ -925,9 +971,10 @@ struct uart_cpm_port cpm_uart_ports[UART_NR] = { }, .tx_nrfifos = TX_NUM_FIFO, .tx_fifosize = TX_BUF_SIZE, - .rx_nrfifos = RX_NUM_FIFO, + .rx_nrfifos = RX_NUM_FIFO, .rx_fifosize = RX_BUF_SIZE, .set_lineif = scc3_lineif, + .wait_closing = SCC_WAIT_CLOSING, }, [UART_SCC4] = { .port = { @@ -938,9 +985,10 @@ struct uart_cpm_port cpm_uart_ports[UART_NR] = { }, .tx_nrfifos = TX_NUM_FIFO, .tx_fifosize = TX_BUF_SIZE, - .rx_nrfifos = RX_NUM_FIFO, + .rx_nrfifos = RX_NUM_FIFO, .rx_fifosize = RX_BUF_SIZE, .set_lineif = scc4_lineif, + .wait_closing = SCC_WAIT_CLOSING, }, }; @@ -983,11 +1031,8 @@ static void cpm_uart_console_write(struct console *co, const char *s, * If the buffer address is in the CPM DPRAM, don't * convert it. */ - if ((uint) (bdp->cbd_bufaddr) > (uint) CPM_ADDR) - cp = (unsigned char *) (bdp->cbd_bufaddr); - else - cp = bus_to_virt(bdp->cbd_bufaddr); - + cp = cpm2cpu_addr(bdp->cbd_bufaddr); + *cp = *s; bdp->cbd_datlen = 1; @@ -1003,10 +1048,7 @@ static void cpm_uart_console_write(struct console *co, const char *s, while ((bdp->cbd_sc & BD_SC_READY) != 0) ; - if ((uint) (bdp->cbd_bufaddr) > (uint) CPM_ADDR) - cp = (unsigned char *) (bdp->cbd_bufaddr); - else - cp = bus_to_virt(bdp->cbd_bufaddr); + cp = cpm2cpu_addr(bdp->cbd_bufaddr); *cp = 13; bdp->cbd_datlen = 1; @@ -1045,7 +1087,7 @@ static int __init cpm_uart_console_setup(struct console *co, char *options) port = (struct uart_port *)&cpm_uart_ports[cpm_uart_port_map[co->index]]; pinfo = (struct uart_cpm_port *)port; - + pinfo->flags |= FLAG_CONSOLE; if (options) { @@ -1062,7 +1104,7 @@ static int __init cpm_uart_console_setup(struct console *co, char *options) /* * Setup any port IO, connect any baud rate generators, * etc. This is expected to be handled by board - * dependant code + * dependant code */ if (pinfo->set_lineif) pinfo->set_lineif(pinfo); @@ -1092,14 +1134,14 @@ static int __init cpm_uart_console_setup(struct console *co, char *options) return 0; } -extern struct uart_driver cpm_reg; +static struct uart_driver cpm_reg; static struct console cpm_scc_uart_console = { - .name "ttyCPM", - .write cpm_uart_console_write, - .device uart_console_device, - .setup cpm_uart_console_setup, - .flags CON_PRINTBUFFER, - .index -1, + .name = "ttyCPM", + .write = cpm_uart_console_write, + .device = uart_console_device, + .setup = cpm_uart_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, .data = &cpm_reg, }; diff --git a/drivers/serial/cpm_uart/cpm_uart_cpm1.c b/drivers/serial/cpm_uart/cpm_uart_cpm1.c index 8efbd6d1d6a4..4b0786e7eb7f 100644 --- a/drivers/serial/cpm_uart/cpm_uart_cpm1.c +++ b/drivers/serial/cpm_uart/cpm_uart_cpm1.c @@ -5,7 +5,7 @@ * * Maintainer: Kumar Gala (kumar.gala@freescale.com) (CPM2) * Pantelis Antoniou (panto@intracom.gr) (CPM1) - * + * * Copyright (C) 2004 Freescale Semiconductor, Inc. * (C) 2004 Intracom, S.A. * @@ -82,6 +82,17 @@ void cpm_line_cr_cmd(int line, int cmd) void smc1_lineif(struct uart_cpm_port *pinfo) { volatile cpm8xx_t *cp = cpmp; + + (void)cp; /* fix warning */ +#if defined (CONFIG_MPC885ADS) + /* Enable SMC1 transceivers */ + { + cp->cp_pepar |= 0x000000c0; + cp->cp_pedir &= ~0x000000c0; + cp->cp_peso &= ~0x00000040; + cp->cp_peso |= 0x00000080; + } +#elif defined (CONFIG_MPC86XADS) unsigned int iobits = 0x000000c0; if (!pinfo->is_portb) { @@ -93,41 +104,33 @@ void smc1_lineif(struct uart_cpm_port *pinfo) ((immap_t *)IMAP_ADDR)->im_ioport.iop_padir &= ~iobits; ((immap_t *)IMAP_ADDR)->im_ioport.iop_paodr &= ~iobits; } - -#ifdef CONFIG_MPC885ADS - /* Enable SMC1 transceivers */ - { - volatile uint __iomem *bcsr1 = ioremap(BCSR1, 4); - uint tmp; - - tmp = in_be32(bcsr1); - tmp &= ~BCSR1_RS232EN_1; - out_be32(bcsr1, tmp); - iounmap(bcsr1); - } #endif - pinfo->brg = 1; } void smc2_lineif(struct uart_cpm_port *pinfo) { -#ifdef CONFIG_MPC885ADS volatile cpm8xx_t *cp = cpmp; - volatile uint __iomem *bcsr1; - uint tmp; + (void)cp; /* fix warning */ +#if defined (CONFIG_MPC885ADS) cp->cp_pepar |= 0x00000c00; cp->cp_pedir &= ~0x00000c00; cp->cp_peso &= ~0x00000400; cp->cp_peso |= 0x00000800; +#elif defined (CONFIG_MPC86XADS) + unsigned int iobits = 0x00000c00; + + if (!pinfo->is_portb) { + cp->cp_pbpar |= iobits; + cp->cp_pbdir &= ~iobits; + cp->cp_pbodr &= ~iobits; + } else { + ((immap_t *)IMAP_ADDR)->im_ioport.iop_papar |= iobits; + ((immap_t *)IMAP_ADDR)->im_ioport.iop_padir &= ~iobits; + ((immap_t *)IMAP_ADDR)->im_ioport.iop_paodr &= ~iobits; + } - /* Enable SMC2 transceivers */ - bcsr1 = ioremap(BCSR1, 4); - tmp = in_be32(bcsr1); - tmp &= ~BCSR1_RS232EN_2; - out_be32(bcsr1, tmp); - iounmap(bcsr1); #endif pinfo->brg = 2; @@ -158,7 +161,7 @@ void scc4_lineif(struct uart_cpm_port *pinfo) } /* - * Allocate DP-Ram and memory buffers. We need to allocate a transmit and + * Allocate DP-Ram and memory buffers. We need to allocate a transmit and * receive buffer descriptors from dual port ram, and a character * buffer area from host mem. If we are allocating for the console we need * to do it from bootmem @@ -185,6 +188,8 @@ int cpm_uart_allocbuf(struct uart_cpm_port *pinfo, unsigned int is_con) memsz = L1_CACHE_ALIGN(pinfo->rx_nrfifos * pinfo->rx_fifosize) + L1_CACHE_ALIGN(pinfo->tx_nrfifos * pinfo->tx_fifosize); if (is_con) { + /* was hostalloc but changed cause it blows away the */ + /* large tlb mapping when pinning the kernel area */ mem_addr = (u8 *) cpm_dpram_addr(cpm_dpalloc(memsz, 8)); dma_addr = 0; } else diff --git a/drivers/video/modedb.c b/drivers/video/modedb.c index fbf659b6dab0..3edc9f49344b 100644 --- a/drivers/video/modedb.c +++ b/drivers/video/modedb.c @@ -246,6 +246,11 @@ static const struct fb_videomode modedb[] = { /* 480x300 @ 72 Hz, 48.0 kHz hsync */ NULL, 72, 480, 300, 33386, 40, 24, 11, 19, 80, 3, 0, FB_VMODE_DOUBLE + }, { + /* 1920x1200 @ 60 Hz, 74.5 Khz hsync */ + NULL, 60, 1920, 1200, 5177, 128, 336, 1, 38, 208, 3, + FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, + FB_VMODE_NONINTERLACED }, }; diff --git a/drivers/video/nvidia/nvidia.c b/drivers/video/nvidia/nvidia.c index b2e6b2407869..52b16850a54e 100644 --- a/drivers/video/nvidia/nvidia.c +++ b/drivers/video/nvidia/nvidia.c @@ -1324,6 +1324,13 @@ static int __devinit nvidia_set_fbinfo(struct fb_info *info) fb_videomode_to_var(&nvidiafb_default_var, &modedb); nvidiafb_default_var.bits_per_pixel = 8; + } else if (par->fpWidth && par->fpHeight) { + char buf[16]; + + memset(buf, 0, 16); + snprintf(buf, 15, "%dx%d", par->fpWidth, par->fpHeight); + fb_find_mode(&nvidiafb_default_var, info, buf, specs->modedb, + specs->modedb_len, &modedb, 8); } if (mode_option) diff --git a/drivers/video/sa1100fb.c b/drivers/video/sa1100fb.c index 2d29db7ef800..beeec7b51425 100644 --- a/drivers/video/sa1100fb.c +++ b/drivers/video/sa1100fb.c @@ -598,7 +598,7 @@ sa1100fb_setcolreg(u_int regno, u_int red, u_int green, u_int blue, * requests for the LCD controller. If we hit this, it means we're * doing nothing but LCD DMA. */ -static unsigned int sa1100fb_display_dma_period(struct fb_var_screeninfo *var) +static inline unsigned int sa1100fb_display_dma_period(struct fb_var_screeninfo *var) { /* * Period = pixclock * bits_per_byte * bytes_per_transfer |