diff options
Diffstat (limited to 'drivers')
45 files changed, 4179 insertions, 1619 deletions
diff --git a/drivers/bluetooth/hci_ath.c b/drivers/bluetooth/hci_ath.c index 2ff6dfd2d3f0..9c4dcf4c62ea 100644 --- a/drivers/bluetooth/hci_ath.c +++ b/drivers/bluetooth/hci_ath.c @@ -51,33 +51,22 @@ struct ath_struct { static int ath_wakeup_ar3k(struct tty_struct *tty) { - struct ktermios ktermios; int status = tty->driver->ops->tiocmget(tty); if (status & TIOCM_CTS) return status; - /* Disable Automatic RTSCTS */ - ktermios = tty->termios; - ktermios.c_cflag &= ~CRTSCTS; - tty_set_termios(tty, &ktermios); - /* Clear RTS first */ - status = tty->driver->ops->tiocmget(tty); + tty->driver->ops->tiocmget(tty); tty->driver->ops->tiocmset(tty, 0x00, TIOCM_RTS); mdelay(20); /* Set RTS, wake up board */ - status = tty->driver->ops->tiocmget(tty); + tty->driver->ops->tiocmget(tty); tty->driver->ops->tiocmset(tty, TIOCM_RTS, 0x00); mdelay(20); status = tty->driver->ops->tiocmget(tty); - - /* Enable Automatic RTSCTS */ - ktermios.c_cflag |= CRTSCTS; - status = tty_set_termios(tty, &ktermios); - return status; } diff --git a/drivers/pnp/driver.c b/drivers/pnp/driver.c index f748cc8cbb03..4e57d3370368 100644 --- a/drivers/pnp/driver.c +++ b/drivers/pnp/driver.c @@ -182,7 +182,7 @@ static int __pnp_bus_suspend(struct device *dev, pm_message_t state) return error; } - if (pnp_dev->protocol->suspend) + if (pnp_can_suspend(pnp_dev)) pnp_dev->protocol->suspend(pnp_dev, state); return 0; } diff --git a/drivers/tty/amiserial.c b/drivers/tty/amiserial.c index d9f85f95eb2a..b2d760055952 100644 --- a/drivers/tty/amiserial.c +++ b/drivers/tty/amiserial.c @@ -931,7 +931,7 @@ static void rs_send_xchar(struct tty_struct *tty, char ch) struct serial_state *info = tty->driver_data; unsigned long flags; - if (serial_paranoia_check(info, tty->name, "rs_send_char")) + if (serial_paranoia_check(info, tty->name, "rs_send_xchar")) return; info->x_char = ch; diff --git a/drivers/tty/ehv_bytechan.c b/drivers/tty/ehv_bytechan.c index 3c60923b0957..342b36b9ad35 100644 --- a/drivers/tty/ehv_bytechan.c +++ b/drivers/tty/ehv_bytechan.c @@ -112,7 +112,6 @@ static void disable_tx_interrupt(struct ehv_bc_data *bc) static int find_console_handle(void) { struct device_node *np = of_stdout; - const char *sprop = NULL; const uint32_t *iprop; /* We don't care what the aliased node is actually called. We only diff --git a/drivers/tty/isicom.c b/drivers/tty/isicom.c index 59ed783c4bcd..2054427992e0 100644 --- a/drivers/tty/isicom.c +++ b/drivers/tty/isicom.c @@ -1055,7 +1055,7 @@ static int isicom_send_break(struct tty_struct *tty, int length) outw(0x8000 | ((port->channel) << (card->shift_count)) | 0x3, base); outw((length & 0xff) << 8 | 0x00, base); - outw((length & 0xff00), base); + outw((length & 0xff00u), base); InterruptTheCard(base); unlock_card(card); diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c index 4ddfa60c9222..cf6e0f2e1331 100644 --- a/drivers/tty/n_tty.c +++ b/drivers/tty/n_tty.c @@ -90,6 +90,7 @@ struct n_tty_data { /* producer-published */ size_t read_head; + size_t commit_head; size_t canon_head; size_t echo_head; size_t echo_commit; @@ -161,36 +162,11 @@ static inline int tty_put_user(struct tty_struct *tty, unsigned char x, return put_user(x, ptr); } -static int receive_room(struct tty_struct *tty) -{ - struct n_tty_data *ldata = tty->disc_data; - int left; - - if (I_PARMRK(tty)) { - /* Multiply read_cnt by 3, since each byte might take up to - * three times as many spaces when PARMRK is set (depending on - * its flags, e.g. parity error). */ - left = N_TTY_BUF_SIZE - read_cnt(ldata) * 3 - 1; - } else - left = N_TTY_BUF_SIZE - read_cnt(ldata) - 1; - - /* - * If we are doing input canonicalization, and there are no - * pending newlines, let characters through without limit, so - * that erase characters will be handled. Other excess - * characters will be beeped. - */ - if (left <= 0) - left = ldata->icanon && ldata->canon_head == ldata->read_tail; - - return left; -} - /** - * n_tty_set_room - receive space + * n_tty_kick_worker - start input worker (if required) * @tty: terminal * - * Re-schedules the flip buffer work if space just became available. + * Re-schedules the flip buffer work if it may have stopped * * Caller holds exclusive termios_rwsem * or @@ -198,12 +174,12 @@ static int receive_room(struct tty_struct *tty) * holds non-exclusive termios_rwsem */ -static void n_tty_set_room(struct tty_struct *tty) +static void n_tty_kick_worker(struct tty_struct *tty) { struct n_tty_data *ldata = tty->disc_data; - /* Did this open up the receive buffer? We may need to flip */ - if (unlikely(ldata->no_room) && receive_room(tty)) { + /* Did the input worker stop? Restart it */ + if (unlikely(ldata->no_room)) { ldata->no_room = 0; WARN_RATELIMIT(tty->port->itty == NULL, @@ -224,7 +200,7 @@ static ssize_t chars_in_buffer(struct tty_struct *tty) ssize_t n = 0; if (!ldata->icanon) - n = read_cnt(ldata); + n = ldata->commit_head - ldata->read_tail; else n = ldata->canon_head - ldata->read_tail; return n; @@ -247,17 +223,20 @@ static void n_tty_write_wakeup(struct tty_struct *tty) static void n_tty_check_throttle(struct tty_struct *tty) { - if (tty->driver->type == TTY_DRIVER_TYPE_PTY) - return; + struct n_tty_data *ldata = tty->disc_data; + /* * Check the remaining room for the input canonicalization * mode. We don't want to throttle the driver if we're in * canonical mode and don't have a newline yet! */ + if (ldata->icanon && ldata->canon_head == ldata->read_tail) + return; + while (1) { int throttled; tty_set_flow_change(tty, TTY_THROTTLE_SAFE); - if (receive_room(tty) >= TTY_THRESHOLD_THROTTLE) + if (N_TTY_BUF_SIZE - read_cnt(ldata) >= TTY_THRESHOLD_THROTTLE) break; throttled = tty_throttle_safe(tty); if (!throttled) @@ -274,7 +253,7 @@ static void n_tty_check_unthrottle(struct tty_struct *tty) return; if (!tty->count) return; - n_tty_set_room(tty); + n_tty_kick_worker(tty); n_tty_write_wakeup(tty->link); if (waitqueue_active(&tty->link->write_wait)) wake_up_interruptible_poll(&tty->link->write_wait, POLLOUT); @@ -296,7 +275,7 @@ static void n_tty_check_unthrottle(struct tty_struct *tty) break; if (!tty->count) break; - n_tty_set_room(tty); + n_tty_kick_worker(tty); unthrottled = tty_unthrottle_safe(tty); if (!unthrottled) break; @@ -313,10 +292,6 @@ static void n_tty_check_unthrottle(struct tty_struct *tty) * * n_tty_receive_buf()/producer path: * caller holds non-exclusive termios_rwsem - * modifies read_head - * - * read_head is only considered 'published' if canonical mode is - * not active. */ static inline void put_tty_queue(unsigned char c, struct n_tty_data *ldata) @@ -340,6 +315,7 @@ static void reset_buffer_flags(struct n_tty_data *ldata) { ldata->read_head = ldata->canon_head = ldata->read_tail = 0; ldata->echo_head = ldata->echo_tail = ldata->echo_commit = 0; + ldata->commit_head = 0; ldata->echo_mark = 0; ldata->line_start = 0; @@ -379,7 +355,7 @@ static void n_tty_flush_buffer(struct tty_struct *tty) { down_write(&tty->termios_rwsem); reset_buffer_flags(tty->disc_data); - n_tty_set_room(tty); + n_tty_kick_worker(tty); if (tty->link) n_tty_packet_mode_flush(tty); @@ -987,10 +963,6 @@ static inline void finish_erasing(struct n_tty_data *ldata) * * n_tty_receive_buf()/producer path: * caller holds non-exclusive termios_rwsem - * modifies read_head - * - * Modifying the read_head is not considered a publish in this context - * because canonical mode is active -- only canon_head publishes */ static void eraser(unsigned char c, struct tty_struct *tty) @@ -1118,16 +1090,45 @@ static void eraser(unsigned char c, struct tty_struct *tty) * Called when a signal is being sent due to terminal input. * Called from the driver receive_buf path so serialized. * + * Performs input and output flush if !NOFLSH. In this context, the echo + * buffer is 'output'. The signal is processed first to alert any current + * readers or writers to discontinue and exit their i/o loops. + * * Locking: ctrl_lock */ static void isig(int sig, struct tty_struct *tty) { + struct n_tty_data *ldata = tty->disc_data; struct pid *tty_pgrp = tty_get_pgrp(tty); if (tty_pgrp) { kill_pgrp(tty_pgrp, sig, 1); put_pid(tty_pgrp); } + + if (!L_NOFLSH(tty)) { + up_read(&tty->termios_rwsem); + down_write(&tty->termios_rwsem); + + /* clear echo buffer */ + mutex_lock(&ldata->output_lock); + ldata->echo_head = ldata->echo_tail = 0; + ldata->echo_mark = ldata->echo_commit = 0; + mutex_unlock(&ldata->output_lock); + + /* clear output buffer */ + tty_driver_flush_buffer(tty); + + /* clear input buffer */ + reset_buffer_flags(tty->disc_data); + + /* notify pty master of flush */ + if (tty->link) + n_tty_packet_mode_flush(tty); + + up_write(&tty->termios_rwsem); + down_read(&tty->termios_rwsem); + } } /** @@ -1139,7 +1140,6 @@ static void isig(int sig, struct tty_struct *tty) * * n_tty_receive_buf()/producer path: * caller holds non-exclusive termios_rwsem - * publishes read_head via put_tty_queue() * * Note: may get exclusive termios_rwsem if flushing input buffer */ @@ -1152,13 +1152,6 @@ static void n_tty_receive_break(struct tty_struct *tty) return; if (I_BRKINT(tty)) { isig(SIGINT, tty); - if (!L_NOFLSH(tty)) { - /* flushing needs exclusive termios_rwsem */ - up_read(&tty->termios_rwsem); - n_tty_flush_buffer(tty); - tty_driver_flush_buffer(tty); - down_read(&tty->termios_rwsem); - } return; } if (I_PARMRK(tty)) { @@ -1209,7 +1202,6 @@ static void n_tty_receive_overrun(struct tty_struct *tty) * * n_tty_receive_buf()/producer path: * caller holds non-exclusive termios_rwsem - * publishes read_head via put_tty_queue() */ static void n_tty_receive_parity_error(struct tty_struct *tty, unsigned char c) { @@ -1233,13 +1225,7 @@ static void n_tty_receive_parity_error(struct tty_struct *tty, unsigned char c) static void n_tty_receive_signal_char(struct tty_struct *tty, int signal, unsigned char c) { - if (!L_NOFLSH(tty)) { - /* flushing needs exclusive termios_rwsem */ - up_read(&tty->termios_rwsem); - n_tty_flush_buffer(tty); - tty_driver_flush_buffer(tty); - down_read(&tty->termios_rwsem); - } + isig(signal, tty); if (I_IXON(tty)) start_tty(tty); if (L_ECHO(tty)) { @@ -1247,7 +1233,6 @@ n_tty_receive_signal_char(struct tty_struct *tty, int signal, unsigned char c) commit_echoes(tty); } else process_echoes(tty); - isig(signal, tty); return; } @@ -1263,7 +1248,6 @@ n_tty_receive_signal_char(struct tty_struct *tty, int signal, unsigned char c) * n_tty_receive_buf()/producer path: * caller holds non-exclusive termios_rwsem * publishes canon_head if canonical mode is active - * otherwise, publishes read_head via put_tty_queue() * * Returns 1 if LNEXT was received, else returns 0 */ @@ -1376,7 +1360,7 @@ n_tty_receive_char_special(struct tty_struct *tty, unsigned char c) handle_newline: set_bit(ldata->read_head & (N_TTY_BUF_SIZE - 1), ldata->read_flags); put_tty_queue(c, ldata); - ldata->canon_head = ldata->read_head; + smp_store_release(&ldata->canon_head, ldata->read_head); kill_fasync(&tty->fasync, SIGIO, POLL_IN); if (waitqueue_active(&tty->read_wait)) wake_up_interruptible_poll(&tty->read_wait, POLLIN); @@ -1512,23 +1496,6 @@ n_tty_receive_char_lnext(struct tty_struct *tty, unsigned char c, char flag) n_tty_receive_char_flagged(tty, c, flag); } -/** - * n_tty_receive_buf - data receive - * @tty: terminal device - * @cp: buffer - * @fp: flag buffer - * @count: characters - * - * Called by the terminal driver when a block of characters has - * been received. This function must be called from soft contexts - * not from interrupt context. The driver is responsible for making - * calls one at a time and in order (or using flush_to_ldisc) - * - * n_tty_receive_buf()/producer path: - * claims non-exclusive termios_rwsem - * publishes read_head and canon_head - */ - static void n_tty_receive_buf_real_raw(struct tty_struct *tty, const unsigned char *cp, char *fp, int count) @@ -1537,16 +1504,14 @@ n_tty_receive_buf_real_raw(struct tty_struct *tty, const unsigned char *cp, size_t n, head; head = ldata->read_head & (N_TTY_BUF_SIZE - 1); - n = N_TTY_BUF_SIZE - max(read_cnt(ldata), head); - n = min_t(size_t, count, n); + n = min_t(size_t, count, N_TTY_BUF_SIZE - head); memcpy(read_buf_addr(ldata, head), cp, n); ldata->read_head += n; cp += n; count -= n; head = ldata->read_head & (N_TTY_BUF_SIZE - 1); - n = N_TTY_BUF_SIZE - max(read_cnt(ldata), head); - n = min_t(size_t, count, n); + n = min_t(size_t, count, N_TTY_BUF_SIZE - head); memcpy(read_buf_addr(ldata, head), cp, n); ldata->read_head += n; } @@ -1676,32 +1641,98 @@ static void __receive_buf(struct tty_struct *tty, const unsigned char *cp, tty->ops->flush_chars(tty); } - if ((!ldata->icanon && (read_cnt(ldata) >= ldata->minimum_to_wake)) || - L_EXTPROC(tty)) { + if (ldata->icanon && !L_EXTPROC(tty)) + return; + + /* publish read_head to consumer */ + smp_store_release(&ldata->commit_head, ldata->read_head); + + if ((read_cnt(ldata) >= ldata->minimum_to_wake) || L_EXTPROC(tty)) { kill_fasync(&tty->fasync, SIGIO, POLL_IN); if (waitqueue_active(&tty->read_wait)) wake_up_interruptible_poll(&tty->read_wait, POLLIN); } } +/** + * n_tty_receive_buf_common - process input + * @tty: device to receive input + * @cp: input chars + * @fp: flags for each char (if NULL, all chars are TTY_NORMAL) + * @count: number of input chars in @cp + * + * Called by the terminal driver when a block of characters has + * been received. This function must be called from soft contexts + * not from interrupt context. The driver is responsible for making + * calls one at a time and in order (or using flush_to_ldisc) + * + * Returns the # of input chars from @cp which were processed. + * + * In canonical mode, the maximum line length is 4096 chars (including + * the line termination char); lines longer than 4096 chars are + * truncated. After 4095 chars, input data is still processed but + * not stored. Overflow processing ensures the tty can always + * receive more input until at least one line can be read. + * + * In non-canonical mode, the read buffer will only accept 4095 chars; + * this provides the necessary space for a newline char if the input + * mode is switched to canonical. + * + * Note it is possible for the read buffer to _contain_ 4096 chars + * in non-canonical mode: the read buffer could already contain the + * maximum canon line of 4096 chars when the mode is switched to + * non-canonical. + * + * n_tty_receive_buf()/producer path: + * claims non-exclusive termios_rwsem + * publishes commit_head or canon_head + */ static int n_tty_receive_buf_common(struct tty_struct *tty, const unsigned char *cp, char *fp, int count, int flow) { struct n_tty_data *ldata = tty->disc_data; - int room, n, rcvd = 0; + int room, n, rcvd = 0, overflow; down_read(&tty->termios_rwsem); while (1) { - room = receive_room(tty); + /* + * When PARMRK is set, each input char may take up to 3 chars + * in the read buf; reduce the buffer space avail by 3x + * + * If we are doing input canonicalization, and there are no + * pending newlines, let characters through without limit, so + * that erase characters will be handled. Other excess + * characters will be beeped. + * + * paired with store in *_copy_from_read_buf() -- guarantees + * the consumer has loaded the data in read_buf up to the new + * read_tail (so this producer will not overwrite unread data) + */ + size_t tail = smp_load_acquire(&ldata->read_tail); + + room = N_TTY_BUF_SIZE - (ldata->read_head - tail); + if (I_PARMRK(tty)) + room = (room + 2) / 3; + room--; + if (room <= 0) { + overflow = ldata->icanon && ldata->canon_head == tail; + if (overflow && room < 0) + ldata->read_head--; + room = overflow; + ldata->no_room = flow && !room; + } else + overflow = 0; + n = min(count, room); - if (!n) { - if (flow && !room) - ldata->no_room = 1; + if (!n) break; - } - __receive_buf(tty, cp, fp, n); + + /* ignore parity errors if handling overflow */ + if (!overflow || !fp || *fp != TTY_PARITY) + __receive_buf(tty, cp, fp, n); + cp += n; if (fp) fp += n; @@ -1710,7 +1741,17 @@ n_tty_receive_buf_common(struct tty_struct *tty, const unsigned char *cp, } tty->receive_room = room; - n_tty_check_throttle(tty); + + /* Unthrottle if handling overflow on pty */ + if (tty->driver->type == TTY_DRIVER_TYPE_PTY) { + if (overflow) { + tty_set_flow_change(tty, TTY_UNTHROTTLE_SAFE); + tty_unthrottle_safe(tty); + __tty_set_flow_change(tty, 0); + } + } else + n_tty_check_throttle(tty); + up_read(&tty->termios_rwsem); return rcvd; @@ -1764,6 +1805,7 @@ static void n_tty_set_termios(struct tty_struct *tty, struct ktermios *old) ldata->canon_head = ldata->read_head; ldata->push = 1; } + ldata->commit_head = ldata->read_head; ldata->erasing = 0; ldata->lnext = 0; } @@ -1817,7 +1859,6 @@ static void n_tty_set_termios(struct tty_struct *tty, struct ktermios *old) else ldata->real_raw = 0; } - n_tty_set_room(tty); /* * Fix tty hang when I_IXON(tty) is cleared, but the tty * been stopped by STOP_CHAR(tty) before it. @@ -1905,7 +1946,7 @@ static inline int input_available_p(struct tty_struct *tty, int poll) if (ldata->icanon && !L_EXTPROC(tty)) return ldata->canon_head != ldata->read_tail; else - return read_cnt(ldata) >= amt; + return ldata->commit_head - ldata->read_tail >= amt; } /** @@ -1937,10 +1978,11 @@ static int copy_from_read_buf(struct tty_struct *tty, int retval; size_t n; bool is_eof; + size_t head = smp_load_acquire(&ldata->commit_head); size_t tail = ldata->read_tail & (N_TTY_BUF_SIZE - 1); retval = 0; - n = min(read_cnt(ldata), N_TTY_BUF_SIZE - tail); + n = min(head - ldata->read_tail, N_TTY_BUF_SIZE - tail); n = min(*nr, n); if (n) { retval = copy_to_user(*b, read_buf_addr(ldata, tail), n); @@ -1948,9 +1990,10 @@ static int copy_from_read_buf(struct tty_struct *tty, is_eof = n == 1 && read_buf(ldata, tail) == EOF_CHAR(tty); tty_audit_add_data(tty, read_buf_addr(ldata, tail), n, ldata->icanon); - ldata->read_tail += n; + smp_store_release(&ldata->read_tail, ldata->read_tail + n); /* Turn single EOF into zero-length read */ - if (L_EXTPROC(tty) && ldata->icanon && is_eof && !read_cnt(ldata)) + if (L_EXTPROC(tty) && ldata->icanon && is_eof && + (head == ldata->read_tail)) n = 0; *b += n; *nr -= n; @@ -1993,7 +2036,7 @@ static int canon_copy_from_read_buf(struct tty_struct *tty, bool eof_push = 0; /* N.B. avoid overrun if nr == 0 */ - n = min(*nr, read_cnt(ldata)); + n = min(*nr, smp_load_acquire(&ldata->canon_head) - ldata->read_tail); if (!n) return 0; @@ -2043,8 +2086,7 @@ static int canon_copy_from_read_buf(struct tty_struct *tty, if (found) clear_bit(eol, ldata->read_flags); - smp_mb__after_atomic(); - ldata->read_tail += c; + smp_store_release(&ldata->read_tail, ldata->read_tail + c); if (found) { if (!ldata->push) @@ -2130,6 +2172,7 @@ static ssize_t n_tty_read(struct tty_struct *tty, struct file *file, ssize_t retval = 0; long timeout; int packet; + size_t tail; c = job_control(tty, file); if (c < 0) @@ -2166,6 +2209,7 @@ static ssize_t n_tty_read(struct tty_struct *tty, struct file *file, } packet = tty->packet; + tail = ldata->read_tail; add_wait_queue(&tty->read_wait, &wait); while (nr) { @@ -2208,7 +2252,6 @@ static ssize_t n_tty_read(struct tty_struct *tty, struct file *file, retval = -ERESTARTSYS; break; } - n_tty_set_room(tty); up_read(&tty->termios_rwsem); timeout = wait_woken(&wait, TASK_INTERRUPTIBLE, @@ -2253,7 +2296,8 @@ static ssize_t n_tty_read(struct tty_struct *tty, struct file *file, if (time) timeout = time; } - n_tty_set_room(tty); + if (tail != ldata->read_tail) + n_tty_kick_worker(tty); up_read(&tty->termios_rwsem); remove_wait_queue(&tty->read_wait, &wait); diff --git a/drivers/tty/pty.c b/drivers/tty/pty.c index a9d256d6e909..e72ee629cead 100644 --- a/drivers/tty/pty.c +++ b/drivers/tty/pty.c @@ -88,19 +88,6 @@ static void pty_unthrottle(struct tty_struct *tty) } /** - * pty_space - report space left for writing - * @to: tty we are writing into - * - * Limit the buffer space used by ptys to 8k. - */ - -static int pty_space(struct tty_struct *to) -{ - int n = tty_buffer_space_avail(to->port); - return min(n, 8192); -} - -/** * pty_write - write to a pty * @tty: the tty we write from * @buf: kernel buffer of data @@ -141,7 +128,7 @@ static int pty_write_room(struct tty_struct *tty) { if (tty->stopped) return 0; - return pty_space(tty->link); + return tty_buffer_space_avail(tty->link->port); } /** @@ -210,6 +197,9 @@ static int pty_signal(struct tty_struct *tty, int sig) { struct pid *pgrp; + if (sig != SIGINT && sig != SIGQUIT && sig != SIGTSTP) + return -EINVAL; + if (tty->link) { pgrp = tty_get_pgrp(tty->link); if (pgrp) @@ -222,10 +212,16 @@ static int pty_signal(struct tty_struct *tty, int sig) static void pty_flush_buffer(struct tty_struct *tty) { struct tty_struct *to = tty->link; + struct tty_ldisc *ld; if (!to) return; - /* tty_buffer_flush(to); FIXME */ + + ld = tty_ldisc_ref(to); + tty_buffer_flush(to, ld); + if (ld) + tty_ldisc_deref(ld); + if (to->packet) { spin_lock_irq(&tty->ctrl_lock); tty->ctrl_status |= TIOCPKT_FLUSHWRITE; @@ -399,6 +395,7 @@ static int pty_common_install(struct tty_driver *driver, struct tty_struct *tty, goto err_put_module; tty_set_lock_subclass(o_tty); + lockdep_set_subclass(&o_tty->termios_rwsem, TTY_LOCK_SLAVE); if (legacy) { /* We always use new tty termios data so we can do this @@ -429,10 +426,14 @@ static int pty_common_install(struct tty_driver *driver, struct tty_struct *tty, o_tty->link = tty; tty_port_init(ports[0]); tty_port_init(ports[1]); + tty_buffer_set_limit(ports[0], 8192); + tty_buffer_set_limit(ports[1], 8192); o_tty->port = ports[0]; tty->port = ports[1]; o_tty->port->itty = o_tty; + tty_buffer_set_lock_subclass(o_tty->port); + tty_driver_kref_get(driver); tty->count++; o_tty->count++; diff --git a/drivers/tty/rocket.c b/drivers/tty/rocket.c index 383c4c796637..c8dd8dc31086 100644 --- a/drivers/tty/rocket.c +++ b/drivers/tty/rocket.c @@ -1390,7 +1390,7 @@ static void rp_unthrottle(struct tty_struct *tty) tty->ldisc.chars_in_buffer(tty)); #endif - if (rocket_paranoia_check(info, "rp_throttle")) + if (rocket_paranoia_check(info, "rp_unthrottle")) return; if (I_IXOFF(tty)) @@ -1458,7 +1458,7 @@ static void rp_wait_until_sent(struct tty_struct *tty, int timeout) orig_jiffies = jiffies; #ifdef ROCKET_DEBUG_WAIT_UNTIL_SENT - printk(KERN_INFO "In RP_wait_until_sent(%d) (jiff=%lu)...\n", timeout, + printk(KERN_INFO "In %s(%d) (jiff=%lu)...\n", __func__, timeout, jiffies); printk(KERN_INFO "cps=%d...\n", info->cps); #endif diff --git a/drivers/tty/serial/8250/8250_core.c b/drivers/tty/serial/8250/8250_core.c index 11c66856ba2f..e3b9570a1eff 100644 --- a/drivers/tty/serial/8250/8250_core.c +++ b/drivers/tty/serial/8250/8250_core.c @@ -329,6 +329,17 @@ static const struct serial8250_config uart_config[] = { .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10, .flags = UART_CAP_FIFO | UART_CAP_AFE, }, +/* tx_loadsz is set to 63-bytes instead of 64-bytes to implement +workaround of errata A-008006 which states that tx_loadsz should be +configured less than Maximum supported fifo bytes */ + [PORT_16550A_FSL64] = { + .name = "16550A_FSL64", + .fifo_size = 64, + .tx_loadsz = 63, + .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10 | + UART_FCR7_64BYTE, + .flags = UART_CAP_FIFO, + }, }; /* Uart divisor latch read */ @@ -956,7 +967,17 @@ static void autoconfig_16550a(struct uart_8250_port *up) up->port.type = PORT_16650; up->capabilities |= UART_CAP_EFR | UART_CAP_SLEEP; } else { - DEBUG_AUTOCONF("Motorola 8xxx DUART "); + serial_out(up, UART_LCR, 0); + serial_out(up, UART_FCR, UART_FCR_ENABLE_FIFO | + UART_FCR7_64BYTE); + status1 = serial_in(up, UART_IIR) >> 5; + serial_out(up, UART_FCR, 0); + serial_out(up, UART_LCR, 0); + + if (status1 == 7) + up->port.type = PORT_16550A_FSL64; + else + DEBUG_AUTOCONF("Motorola 8xxx DUART "); } serial_out(up, UART_EFR, 0); return; @@ -1355,9 +1376,11 @@ static void serial8250_start_tx(struct uart_port *port) struct uart_8250_port *up = up_to_u8250p(port); serial8250_rpm_get_tx(up); - if (up->dma && !up->dma->tx_dma(up)) { + + if (up->dma && !up->dma->tx_dma(up)) return; - } else if (!(up->ier & UART_IER_THRI)) { + + if (!(up->ier & UART_IER_THRI)) { up->ier |= UART_IER_THRI; serial_port_out(port, UART_IER, up->ier); @@ -1365,7 +1388,7 @@ static void serial8250_start_tx(struct uart_port *port) unsigned char lsr; lsr = serial_in(up, UART_LSR); up->lsr_saved_flags |= lsr & LSR_SAVE_FLAGS; - if (lsr & UART_LSR_TEMT) + if (lsr & UART_LSR_THRE) serial8250_tx_chars(up); } } @@ -1924,7 +1947,7 @@ static unsigned int serial8250_get_mctrl(struct uart_port *port) return ret; } -static void serial8250_set_mctrl(struct uart_port *port, unsigned int mctrl) +void serial8250_do_set_mctrl(struct uart_port *port, unsigned int mctrl) { struct uart_8250_port *up = up_to_u8250p(port); unsigned char mcr = 0; @@ -1944,6 +1967,14 @@ static void serial8250_set_mctrl(struct uart_port *port, unsigned int mctrl) serial_port_out(port, UART_MCR, mcr); } +EXPORT_SYMBOL_GPL(serial8250_do_set_mctrl); + +static void serial8250_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ + if (port->set_mctrl) + return port->set_mctrl(port, mctrl); + return serial8250_do_set_mctrl(port, mctrl); +} static void serial8250_break_ctl(struct uart_port *port, int break_state) { @@ -2382,13 +2413,34 @@ static void serial8250_shutdown(struct uart_port *port) serial8250_do_shutdown(port); } -static unsigned int serial8250_get_divisor(struct uart_port *port, unsigned int baud) +/* + * XR17V35x UARTs have an extra fractional divisor register (DLD) + * Calculate divisor with extra 4-bit fractional portion + */ +static unsigned int xr17v35x_get_divisor(struct uart_8250_port *up, + unsigned int baud, + unsigned int *frac) +{ + struct uart_port *port = &up->port; + unsigned int quot_16; + + quot_16 = DIV_ROUND_CLOSEST(port->uartclk, baud); + *frac = quot_16 & 0x0f; + + return quot_16 >> 4; +} + +static unsigned int serial8250_get_divisor(struct uart_8250_port *up, + unsigned int baud, + unsigned int *frac) { + struct uart_port *port = &up->port; unsigned int quot; /* * Handle magic divisors for baud rates above baud_base on * SMSC SuperIO chips. + * */ if ((port->flags & UPF_MAGIC_MULTIPLIER) && baud == (port->uartclk/4)) @@ -2396,22 +2448,26 @@ static unsigned int serial8250_get_divisor(struct uart_port *port, unsigned int else if ((port->flags & UPF_MAGIC_MULTIPLIER) && baud == (port->uartclk/8)) quot = 0x8002; + else if (up->port.type == PORT_XR17V35X) + quot = xr17v35x_get_divisor(up, baud, frac); else quot = uart_get_divisor(port, baud); + /* + * Oxford Semi 952 rev B workaround + */ + if (up->bugs & UART_BUG_QUOT && (quot & 0xff) == 0) + quot++; + return quot; } -void -serial8250_do_set_termios(struct uart_port *port, struct ktermios *termios, - struct ktermios *old) +static unsigned char serial8250_compute_lcr(struct uart_8250_port *up, + tcflag_t c_cflag) { - struct uart_8250_port *up = up_to_u8250p(port); unsigned char cval; - unsigned long flags; - unsigned int baud, quot; - switch (termios->c_cflag & CSIZE) { + switch (c_cflag & CSIZE) { case CS5: cval = UART_LCR_WLEN5; break; @@ -2427,33 +2483,80 @@ serial8250_do_set_termios(struct uart_port *port, struct ktermios *termios, break; } - if (termios->c_cflag & CSTOPB) + if (c_cflag & CSTOPB) cval |= UART_LCR_STOP; - if (termios->c_cflag & PARENB) { + if (c_cflag & PARENB) { cval |= UART_LCR_PARITY; if (up->bugs & UART_BUG_PARITY) up->fifo_bug = true; } - if (!(termios->c_cflag & PARODD)) + if (!(c_cflag & PARODD)) cval |= UART_LCR_EPAR; #ifdef CMSPAR - if (termios->c_cflag & CMSPAR) + if (c_cflag & CMSPAR) cval |= UART_LCR_SPAR; #endif + return cval; +} + +static void serial8250_set_divisor(struct uart_port *port, unsigned int baud, + unsigned int quot, unsigned int quot_frac) +{ + struct uart_8250_port *up = up_to_u8250p(port); + + /* Workaround to enable 115200 baud on OMAP1510 internal ports */ + if (is_omap1510_8250(up)) { + if (baud == 115200) { + quot = 1; + serial_port_out(port, UART_OMAP_OSC_12M_SEL, 1); + } else + serial_port_out(port, UART_OMAP_OSC_12M_SEL, 0); + } + + /* + * For NatSemi, switch to bank 2 not bank 1, to avoid resetting EXCR2, + * otherwise just set DLAB + */ + if (up->capabilities & UART_NATSEMI) + serial_port_out(port, UART_LCR, 0xe0); + else + serial_port_out(port, UART_LCR, up->lcr | UART_LCR_DLAB); + + serial_dl_write(up, quot); + + /* XR17V35x UARTs have an extra fractional divisor register (DLD) */ + if (up->port.type == PORT_XR17V35X) + serial_port_out(port, 0x2, quot_frac); +} + +void +serial8250_do_set_termios(struct uart_port *port, struct ktermios *termios, + struct ktermios *old) +{ + struct uart_8250_port *up = up_to_u8250p(port); + unsigned char cval; + unsigned long flags; + unsigned int baud, quot, frac = 0; + + cval = serial8250_compute_lcr(up, termios->c_cflag); + /* * Ask the core to calculate the divisor for us. */ baud = uart_get_baud_rate(port, termios, old, port->uartclk / 16 / 0xffff, port->uartclk / 16); - quot = serial8250_get_divisor(port, baud); + quot = serial8250_get_divisor(up, baud, &frac); /* - * Oxford Semi 952 rev B workaround + * Ok, we're now changing the port state. Do it with + * interrupts disabled. */ - if (up->bugs & UART_BUG_QUOT && (quot & 0xff) == 0) - quot++; + serial8250_rpm_get(up); + spin_lock_irqsave(&port->lock, flags); + + up->lcr = cval; /* Save computed LCR */ if (up->capabilities & UART_CAP_FIFO && port->fifosize > 1) { /* NOTE: If fifo_bug is not set, a user can set RX_trigger. */ @@ -2478,13 +2581,6 @@ serial8250_do_set_termios(struct uart_port *port, struct ktermios *termios, } /* - * Ok, we're now changing the port state. Do it with - * interrupts disabled. - */ - serial8250_rpm_get(up); - spin_lock_irqsave(&port->lock, flags); - - /* * Update the per-port timeout. */ uart_update_timeout(port, termios->c_cflag, baud); @@ -2548,43 +2644,7 @@ serial8250_do_set_termios(struct uart_port *port, struct ktermios *termios, serial_port_out(port, UART_EFR, efr); } - /* Workaround to enable 115200 baud on OMAP1510 internal ports */ - if (is_omap1510_8250(up)) { - if (baud == 115200) { - quot = 1; - serial_port_out(port, UART_OMAP_OSC_12M_SEL, 1); - } else - serial_port_out(port, UART_OMAP_OSC_12M_SEL, 0); - } - - /* - * For NatSemi, switch to bank 2 not bank 1, to avoid resetting EXCR2, - * otherwise just set DLAB - */ - if (up->capabilities & UART_NATSEMI) - serial_port_out(port, UART_LCR, 0xe0); - else - serial_port_out(port, UART_LCR, cval | UART_LCR_DLAB); - - serial_dl_write(up, quot); - - /* - * XR17V35x UARTs have an extra fractional divisor register (DLD) - * - * We need to recalculate all of the registers, because DLM and DLL - * are already rounded to a whole integer. - * - * When recalculating we use a 32x clock instead of a 16x clock to - * allow 1-bit for rounding in the fractional part. - */ - if (up->port.type == PORT_XR17V35X) { - unsigned int baud_x32 = (port->uartclk * 2) / baud; - u16 quot = baud_x32 / 32; - u8 quot_frac = DIV_ROUND_CLOSEST(baud_x32 % 32, 2); - - serial_dl_write(up, quot); - serial_port_out(port, 0x2, quot_frac & 0xf); - } + serial8250_set_divisor(port, baud, quot, frac); /* * LCR DLAB must be set to enable 64-byte FIFO mode. If the FCR @@ -2593,8 +2653,7 @@ serial8250_do_set_termios(struct uart_port *port, struct ktermios *termios, if (port->type == PORT_16750) serial_port_out(port, UART_FCR, up->fcr); - serial_port_out(port, UART_LCR, cval); /* reset DLAB */ - up->lcr = cval; /* Save LCR */ + serial_port_out(port, UART_LCR, up->lcr); /* reset DLAB */ if (port->type != PORT_16750) { /* emulated UARTs (Lucent Venus 167x) need two steps */ if (up->fcr & UART_FCR_ENABLE_FIFO) @@ -3208,6 +3267,27 @@ serial8250_console_write(struct console *co, const char *s, unsigned int count) else serial_port_out(port, UART_IER, 0); + /* check scratch reg to see if port powered off during system sleep */ + if (up->canary && (up->canary != serial_port_in(port, UART_SCR))) { + struct ktermios termios; + unsigned int baud, quot, frac = 0; + + termios.c_cflag = port->cons->cflag; + if (port->state->port.tty && termios.c_cflag == 0) + termios.c_cflag = port->state->port.tty->termios.c_cflag; + + baud = uart_get_baud_rate(port, &termios, NULL, + port->uartclk / 16 / 0xffff, + port->uartclk / 16); + quot = serial8250_get_divisor(up, baud, &frac); + + serial8250_set_divisor(port, baud, quot, frac); + serial_port_out(port, UART_LCR, up->lcr); + serial_port_out(port, UART_MCR, UART_MCR_DTR | UART_MCR_RTS); + + up->canary = 0; + } + uart_console_write(port, s, count, serial8250_console_putchar); /* @@ -3358,7 +3438,17 @@ int __init early_serial_setup(struct uart_port *port) */ void serial8250_suspend_port(int line) { - uart_suspend_port(&serial8250_reg, &serial8250_ports[line].port); + struct uart_8250_port *up = &serial8250_ports[line]; + struct uart_port *port = &up->port; + + if (!console_suspend_enabled && uart_console(port) && + port->type != PORT_8250) { + unsigned char canary = 0xa5; + serial_out(up, UART_SCR, canary); + up->canary = canary; + } + + uart_suspend_port(&serial8250_reg, port); } /** @@ -3372,6 +3462,8 @@ void serial8250_resume_port(int line) struct uart_8250_port *up = &serial8250_ports[line]; struct uart_port *port = &up->port; + up->canary = 0; + if (up->capabilities & UART_NATSEMI) { /* Ensure it's still in high speed mode */ serial_port_out(port, UART_LCR, 0xE0); @@ -3605,6 +3697,8 @@ int serial8250_register_8250_port(struct uart_8250_port *up) /* Possibly override set_termios call */ if (up->port.set_termios) uart->port.set_termios = up->port.set_termios; + if (up->port.set_mctrl) + uart->port.set_mctrl = up->port.set_mctrl; if (up->port.startup) uart->port.startup = up->port.startup; if (up->port.shutdown) diff --git a/drivers/tty/serial/8250/8250_dma.c b/drivers/tty/serial/8250/8250_dma.c index fcd7ac6af2fc..21d01a491405 100644 --- a/drivers/tty/serial/8250/8250_dma.c +++ b/drivers/tty/serial/8250/8250_dma.c @@ -59,7 +59,6 @@ static void __dma_rx_complete(void *param) dma->rx_running = 0; dmaengine_tx_status(dma->rxchan, dma->rx_cookie, &state); - dmaengine_terminate_all(dma->rxchan); count = dma->rx_size - state.residue; @@ -81,6 +80,10 @@ int serial8250_tx_dma(struct uart_8250_port *p) return 0; dma->tx_size = CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE); + if (dma->tx_size < p->port.fifosize) { + ret = -EINVAL; + goto err; + } desc = dmaengine_prep_slave_single(dma->txchan, dma->tx_addr + xmit->tail, @@ -131,6 +134,7 @@ int serial8250_rx_dma(struct uart_8250_port *p, unsigned int iir) if (dma->rx_running) { dmaengine_pause(dma->rxchan); __dma_rx_complete(p); + dmaengine_terminate_all(dma->rxchan); } return -ETIMEDOUT; default: diff --git a/drivers/tty/serial/8250/8250_dw.c b/drivers/tty/serial/8250/8250_dw.c index 555de07db593..e60116235836 100644 --- a/drivers/tty/serial/8250/8250_dw.c +++ b/drivers/tty/serial/8250/8250_dw.c @@ -351,10 +351,20 @@ static int dw8250_probe_of(struct uart_port *p, static int dw8250_probe_acpi(struct uart_8250_port *up, struct dw8250_data *data) { + const struct acpi_device_id *id; struct uart_port *p = &up->port; dw8250_setup_port(up); + id = acpi_match_device(p->dev->driver->acpi_match_table, p->dev); + if (!id) + return -ENODEV; + + if (!p->uartclk) + if (device_property_read_u32(p->dev, "clock-frequency", + &p->uartclk)) + return -EINVAL; + p->iotype = UPIO_MEM32; p->serial_in = dw8250_serial_in32; p->serial_out = dw8250_serial_out32; @@ -577,6 +587,7 @@ static const struct acpi_device_id dw8250_acpi_match[] = { { "INT3435", 0 }, { "80860F0A", 0 }, { "8086228A", 0 }, + { "APMC0D08", 0}, { }, }; MODULE_DEVICE_TABLE(acpi, dw8250_acpi_match); diff --git a/drivers/tty/serial/8250/8250_early.c b/drivers/tty/serial/8250/8250_early.c index 4858b8a99d3b..c31a22b4f845 100644 --- a/drivers/tty/serial/8250/8250_early.c +++ b/drivers/tty/serial/8250/8250_early.c @@ -93,15 +93,18 @@ static void __init early_serial8250_write(struct console *console, struct uart_port *port = &early_device->port; unsigned int ier; - /* Save the IER and disable interrupts */ + /* Save the IER and disable interrupts preserving the UUE bit */ ier = serial8250_early_in(port, UART_IER); - serial8250_early_out(port, UART_IER, 0); + if (ier) + serial8250_early_out(port, UART_IER, ier & UART_IER_UUE); uart_console_write(port, s, count, serial_putc); /* Wait for transmitter to become empty and restore the IER */ wait_for_xmitr(port); - serial8250_early_out(port, UART_IER, ier); + + if (ier) + serial8250_early_out(port, UART_IER, ier); } static unsigned int __init probe_baud(struct uart_port *port) @@ -124,9 +127,11 @@ static void __init init_port(struct earlycon_device *device) struct uart_port *port = &device->port; unsigned int divisor; unsigned char c; + unsigned int ier; serial8250_early_out(port, UART_LCR, 0x3); /* 8n1 */ - serial8250_early_out(port, UART_IER, 0); /* no interrupt */ + ier = serial8250_early_in(port, UART_IER); + serial8250_early_out(port, UART_IER, ier & UART_IER_UUE); /* no interrupt */ serial8250_early_out(port, UART_FCR, 0); /* no fifo */ serial8250_early_out(port, UART_MCR, 0x3); /* DTR + RTS */ diff --git a/drivers/tty/serial/8250/8250_omap.c b/drivers/tty/serial/8250/8250_omap.c index 96b69bfd773f..fe6d2e51da09 100644 --- a/drivers/tty/serial/8250/8250_omap.c +++ b/drivers/tty/serial/8250/8250_omap.c @@ -106,6 +106,28 @@ static u32 uart_read(struct uart_8250_port *up, u32 reg) return readl(up->port.membase + (reg << up->port.regshift)); } +static void omap8250_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ + struct uart_8250_port *up = up_to_u8250p(port); + struct omap8250_priv *priv = up->port.private_data; + u8 lcr; + + serial8250_do_set_mctrl(port, mctrl); + + /* + * Turn off autoRTS if RTS is lowered and restore autoRTS setting + * if RTS is raised + */ + lcr = serial_in(up, UART_LCR); + serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); + if ((mctrl & TIOCM_RTS) && (port->status & UPSTAT_AUTORTS)) + priv->efr |= UART_EFR_RTS; + else + priv->efr &= ~UART_EFR_RTS; + serial_out(up, UART_EFR, priv->efr); + serial_out(up, UART_LCR, lcr); +} + /* * Work Around for Errata i202 (2430, 3430, 3630, 4430 and 4460) * The access to uart register after MDR1 Access @@ -397,12 +419,12 @@ static void omap_8250_set_termios(struct uart_port *port, priv->efr = 0; up->mcr &= ~(UART_MCR_RTS | UART_MCR_XONANY); - if (termios->c_cflag & CRTSCTS && up->port.flags & UPF_HARD_FLOW) { - /* Enable AUTORTS and AUTOCTS */ - priv->efr |= UART_EFR_CTS | UART_EFR_RTS; + up->port.status &= ~(UPSTAT_AUTOCTS | UPSTAT_AUTORTS | UPSTAT_AUTOXOFF); - /* Ensure MCR RTS is asserted */ - up->mcr |= UART_MCR_RTS; + if (termios->c_cflag & CRTSCTS && up->port.flags & UPF_HARD_FLOW) { + /* Enable AUTOCTS (autoRTS is enabled when RTS is raised) */ + up->port.status |= UPSTAT_AUTOCTS | UPSTAT_AUTORTS; + priv->efr |= UART_EFR_CTS; } else if (up->port.flags & UPF_SOFT_FLOW) { /* * IXON Flag: @@ -417,8 +439,10 @@ static void omap_8250_set_termios(struct uart_port *port, * Enable XON/XOFF flow control on output. * Transmit XON1, XOFF1 */ - if (termios->c_iflag & IXOFF) + if (termios->c_iflag & IXOFF) { + up->port.status |= UPSTAT_AUTOXOFF; priv->efr |= OMAP_UART_SW_TX; + } /* * IXANY Flag: @@ -450,18 +474,18 @@ static void omap_8250_set_termios(struct uart_port *port, static void omap_8250_pm(struct uart_port *port, unsigned int state, unsigned int oldstate) { - struct uart_8250_port *up = - container_of(port, struct uart_8250_port, port); - struct omap8250_priv *priv = up->port.private_data; + struct uart_8250_port *up = up_to_u8250p(port); + u8 efr; pm_runtime_get_sync(port->dev); serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); - serial_out(up, UART_EFR, priv->efr | UART_EFR_ECB); + efr = serial_in(up, UART_EFR); + serial_out(up, UART_EFR, efr | UART_EFR_ECB); serial_out(up, UART_LCR, 0); serial_out(up, UART_IER, (state != 0) ? UART_IERX_SLEEP : 0); serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); - serial_out(up, UART_EFR, priv->efr); + serial_out(up, UART_EFR, efr); serial_out(up, UART_LCR, 0); pm_runtime_mark_last_busy(port->dev); @@ -1007,6 +1031,7 @@ static int omap8250_probe(struct platform_device *pdev) up.capabilities |= UART_CAP_RPM; #endif up.port.set_termios = omap_8250_set_termios; + up.port.set_mctrl = omap8250_set_mctrl; up.port.pm = omap_8250_pm; up.port.startup = omap_8250_startup; up.port.shutdown = omap_8250_shutdown; @@ -1248,6 +1273,46 @@ static int omap8250_runtime_resume(struct device *dev) } #endif +#ifdef CONFIG_SERIAL_8250_OMAP_TTYO_FIXUP +static int __init omap8250_console_fixup(void) +{ + char *omap_str; + char *options; + u8 idx; + + if (strstr(boot_command_line, "console=ttyS")) + /* user set a ttyS based name for the console */ + return 0; + + omap_str = strstr(boot_command_line, "console=ttyO"); + if (!omap_str) + /* user did not set ttyO based console, so we don't care */ + return 0; + + omap_str += 12; + if ('0' <= *omap_str && *omap_str <= '9') + idx = *omap_str - '0'; + else + return 0; + + omap_str++; + if (omap_str[0] == ',') { + omap_str++; + options = omap_str; + } else { + options = NULL; + } + + add_preferred_console("ttyS", idx, options); + pr_err("WARNING: Your 'console=ttyO%d' has been replaced by 'ttyS%d'\n", + idx, idx); + pr_err("This ensures that you still see kernel messages. Please\n"); + pr_err("update your kernel commandline.\n"); + return 0; +} +console_initcall(omap8250_console_fixup); +#endif + static const struct dev_pm_ops omap8250_dev_pm_ops = { SET_SYSTEM_SLEEP_PM_OPS(omap8250_suspend, omap8250_resume) SET_RUNTIME_PM_OPS(omap8250_runtime_suspend, @@ -1269,7 +1334,6 @@ static struct platform_driver omap8250_platform_driver = { .name = "omap8250", .pm = &omap8250_dev_pm_ops, .of_match_table = omap8250_dt_ids, - .owner = THIS_MODULE, }, .probe = omap8250_probe, .remove = omap8250_remove, diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c index d1f8dc6aabcb..daf2c82984e9 100644 --- a/drivers/tty/serial/8250/8250_pci.c +++ b/drivers/tty/serial/8250/8250_pci.c @@ -221,13 +221,13 @@ pci_hp_diva_setup(struct serial_private *priv, */ static int pci_inteli960ni_init(struct pci_dev *dev) { - unsigned long oldval; + u32 oldval; if (!(dev->subsystem_device & 0x1000)) return -ENODEV; /* is firmware started? */ - pci_read_config_dword(dev, 0x44, (void *)&oldval); + pci_read_config_dword(dev, 0x44, &oldval); if (oldval == 0x00001000L) { /* RESET value */ dev_dbg(&dev->dev, "Local i960 firmware missing\n"); return -ENODEV; diff --git a/drivers/tty/serial/8250/8250_pnp.c b/drivers/tty/serial/8250/8250_pnp.c index 682a2fbe5c06..50a09cd76d50 100644 --- a/drivers/tty/serial/8250/8250_pnp.c +++ b/drivers/tty/serial/8250/8250_pnp.c @@ -426,7 +426,7 @@ static int serial_pnp_guess_board(struct pnp_dev *dev) static int serial_pnp_probe(struct pnp_dev *dev, const struct pnp_device_id *dev_id) { - struct uart_8250_port uart; + struct uart_8250_port uart, *port; int ret, line, flags = dev_id->driver_data; if (flags & UNKNOWN_DEV) { @@ -471,6 +471,10 @@ serial_pnp_probe(struct pnp_dev *dev, const struct pnp_device_id *dev_id) if (line < 0 || (flags & CIR_PORT)) return -ENODEV; + port = serial8250_get_port(line); + if (uart_console(&port->port)) + dev->capabilities |= PNP_CONSOLE; + pnp_set_drvdata(dev, (void *)((long)line + 1)); return 0; } @@ -478,6 +482,8 @@ serial_pnp_probe(struct pnp_dev *dev, const struct pnp_device_id *dev_id) static void serial_pnp_remove(struct pnp_dev *dev) { long line = (long)pnp_get_drvdata(dev); + + dev->capabilities &= ~PNP_CONSOLE; if (line) serial8250_unregister_port(line - 1); } diff --git a/drivers/tty/serial/8250/Kconfig b/drivers/tty/serial/8250/Kconfig index 0fcbcd29502f..6f7f2d753def 100644 --- a/drivers/tty/serial/8250/Kconfig +++ b/drivers/tty/serial/8250/Kconfig @@ -308,6 +308,25 @@ config SERIAL_8250_OMAP This driver uses ttyS instead of ttyO. +config SERIAL_8250_OMAP_TTYO_FIXUP + bool "Replace ttyO with ttyS" + depends on SERIAL_8250_OMAP=y && SERIAL_8250_CONSOLE + default y + help + This option replaces the "console=ttyO" argument with the matching + ttyS argument if the user did not specified it on the command line. + This ensures that the user can see the kernel output during boot + which he wouldn't see otherwise. The getty has still to be configured + for ttyS instead of ttyO regardless of this option. + This option is intended for people who "automatically" enable this + driver without knowing that this driver requires a different console= + argument. If you read this, please keep this option disabled and + instead update your kernel command line. If you prepare a kernel for a + distribution or other kind of larger user base then you probably want + to keep this option enabled. Otherwise people might complain about a + not booting kernel because the serial console remains silent in case + they forgot to update the command line. + config SERIAL_8250_FINTEK tristate "Support for Fintek F81216A LPC to 4 UART" depends on SERIAL_8250 && PNP diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig index c79b43cd6014..5d916c7a216b 100644 --- a/drivers/tty/serial/Kconfig +++ b/drivers/tty/serial/Kconfig @@ -241,6 +241,7 @@ config SERIAL_SAMSUNG tristate "Samsung SoC serial support" depends on PLAT_SAMSUNG || ARCH_EXYNOS select SERIAL_CORE + select SERIAL_EARLYCON help Support for the on-chip UARTs on the Samsung S3C24XX series CPUs, providing /dev/ttySAC0, 1 and 2 (note, some machines may not @@ -482,16 +483,6 @@ config SERIAL_SA1100_CONSOLE your boot loader (lilo or loadlin) about how to pass options to the kernel at boot time.) -config SERIAL_MRST_MAX3110 - tristate "SPI UART driver for Max3110" - depends on SPI_DW_PCI - select SERIAL_CORE - select SERIAL_CORE_CONSOLE - help - This is the UART protocol driver for the MAX3110 device on - the Intel Moorestown platform. On other systems use the max3100 - driver. - config SERIAL_MFD_HSU tristate "Medfield High Speed UART support" depends on PCI @@ -1094,6 +1085,16 @@ config SERIAL_VT8500_CONSOLE depends on SERIAL_VT8500=y select SERIAL_CORE_CONSOLE +config SERIAL_ETRAXFS + bool "ETRAX FS serial port support" + depends on ETRAX_ARCH_V32 && OF + select SERIAL_CORE + +config SERIAL_ETRAXFS_CONSOLE + bool "ETRAX FS serial console support" + depends on SERIAL_ETRAXFS + select SERIAL_CORE_CONSOLE + config SERIAL_NETX tristate "NetX serial port support" depends on ARCH_NETX @@ -1549,6 +1550,21 @@ config SERIAL_FSL_LPUART_CONSOLE If you have enabled the lpuart serial port on the Freescale SoCs, you can make it the console by answering Y to this option. +config SERIAL_CONEXANT_DIGICOLOR + tristate "Conexant Digicolor CX92xxx USART serial port support" + depends on OF + select SERIAL_CORE + help + Support for the on-chip USART on Conexant Digicolor SoCs. + +config SERIAL_CONEXANT_DIGICOLOR_CONSOLE + bool "Console on Conexant Digicolor serial port" + depends on SERIAL_CONEXANT_DIGICOLOR=y + select SERIAL_CORE_CONSOLE + help + If you have enabled the USART serial port on Conexant Digicolor + SoCs, you can make it the console by answering Y to this option. + config SERIAL_ST_ASC tristate "ST ASC serial port support" select SERIAL_CORE @@ -1577,6 +1593,24 @@ config SERIAL_MEN_Z135 This driver can also be build as a module. If so, the module will be called men_z135_uart.ko +config SERIAL_SPRD + tristate "Support for Spreadtrum serial" + depends on ARCH_SPRD + select SERIAL_CORE + help + This enables the driver for the Spreadtrum's serial. + +config SERIAL_SPRD_CONSOLE + bool "Spreadtrum UART console support" + depends on SERIAL_SPRD=y + select SERIAL_CORE_CONSOLE + select SERIAL_EARLYCON + help + Support for early debug console using Spreadtrum's serial. This enables + the console before standard serial driver is probed. This is enabled + with "earlycon" on the kernel command line. The console is + enabled when early_param is processed. + endmenu config SERIAL_MCTRL_GPIO diff --git a/drivers/tty/serial/Makefile b/drivers/tty/serial/Makefile index 9a548acf5fdc..599be4b05a26 100644 --- a/drivers/tty/serial/Makefile +++ b/drivers/tty/serial/Makefile @@ -51,6 +51,7 @@ obj-$(CONFIG_SERIAL_MPSC) += mpsc.o obj-$(CONFIG_SERIAL_MESON) += meson_uart.o obj-$(CONFIG_SERIAL_SB1250_DUART) += sb1250-duart.o obj-$(CONFIG_ETRAX_SERIAL) += crisv10.o +obj-$(CONFIG_SERIAL_ETRAXFS) += etraxfs-uart.o obj-$(CONFIG_SERIAL_SCCNXP) += sccnxp.o obj-$(CONFIG_SERIAL_SC16IS7XX) += sc16is7xx.o obj-$(CONFIG_SERIAL_JSM) += jsm/ @@ -77,7 +78,6 @@ obj-$(CONFIG_SERIAL_TIMBERDALE) += timbuart.o obj-$(CONFIG_SERIAL_GRLIB_GAISLER_APBUART) += apbuart.o obj-$(CONFIG_SERIAL_ALTERA_JTAGUART) += altera_jtaguart.o obj-$(CONFIG_SERIAL_VT8500) += vt8500_serial.o -obj-$(CONFIG_SERIAL_MRST_MAX3110) += mrst_max3110.o obj-$(CONFIG_SERIAL_MFD_HSU) += mfd.o obj-$(CONFIG_SERIAL_IFX6X60) += ifx6x60.o obj-$(CONFIG_SERIAL_PCH_UART) += pch_uart.o @@ -92,7 +92,9 @@ obj-$(CONFIG_SERIAL_EFM32_UART) += efm32-uart.o obj-$(CONFIG_SERIAL_ARC) += arc_uart.o obj-$(CONFIG_SERIAL_RP2) += rp2.o obj-$(CONFIG_SERIAL_FSL_LPUART) += fsl_lpuart.o +obj-$(CONFIG_SERIAL_CONEXANT_DIGICOLOR) += digicolor-usart.o obj-$(CONFIG_SERIAL_MEN_Z135) += men_z135_uart.o +obj-$(CONFIG_SERIAL_SPRD) += sprd_serial.o # GPIOLIB helpers for modem control lines obj-$(CONFIG_SERIAL_MCTRL_GPIO) += serial_mctrl_gpio.o diff --git a/drivers/tty/serial/altera_jtaguart.c b/drivers/tty/serial/altera_jtaguart.c index 192d0435bb86..0fefdd8931a2 100644 --- a/drivers/tty/serial/altera_jtaguart.c +++ b/drivers/tty/serial/altera_jtaguart.c @@ -441,6 +441,7 @@ static int altera_jtaguart_probe(struct platform_device *pdev) port->iotype = SERIAL_IO_MEM; port->ops = &altera_jtaguart_ops; port->flags = UPF_BOOT_AUTOCONF; + port->dev = &pdev->dev; uart_add_one_port(&altera_jtaguart_driver, port); diff --git a/drivers/tty/serial/altera_uart.c b/drivers/tty/serial/altera_uart.c index eb15a50623cb..b2859fe07e14 100644 --- a/drivers/tty/serial/altera_uart.c +++ b/drivers/tty/serial/altera_uart.c @@ -589,6 +589,7 @@ static int altera_uart_probe(struct platform_device *pdev) port->iotype = SERIAL_IO_MEM; port->ops = &altera_uart_ops; port->flags = UPF_BOOT_AUTOCONF; + port->dev = &pdev->dev; platform_set_drvdata(pdev, port); diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c index 4d848a29e223..846552bff67d 100644 --- a/drivers/tty/serial/atmel_serial.c +++ b/drivers/tty/serial/atmel_serial.c @@ -341,13 +341,37 @@ static u_int atmel_tx_empty(struct uart_port *port) static void atmel_set_mctrl(struct uart_port *port, u_int mctrl) { unsigned int control = 0; - unsigned int mode; + unsigned int mode = UART_GET_MR(port); + unsigned int rts_paused, rts_ready; struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); + /* override mode to RS485 if needed, otherwise keep the current mode */ + if (port->rs485.flags & SER_RS485_ENABLED) { + if ((port->rs485.delay_rts_after_send) > 0) + UART_PUT_TTGR(port, port->rs485.delay_rts_after_send); + mode &= ~ATMEL_US_USMODE; + mode |= ATMEL_US_USMODE_RS485; + } + + /* set the RTS line state according to the mode */ + if ((mode & ATMEL_US_USMODE) == ATMEL_US_USMODE_HWHS) { + /* force RTS line to high level */ + rts_paused = ATMEL_US_RTSEN; + + /* give the control of the RTS line back to the hardware */ + rts_ready = ATMEL_US_RTSDIS; + } else { + /* force RTS line to high level */ + rts_paused = ATMEL_US_RTSDIS; + + /* force RTS line to low level */ + rts_ready = ATMEL_US_RTSEN; + } + if (mctrl & TIOCM_RTS) - control |= ATMEL_US_RTSEN; + control |= rts_ready; else - control |= ATMEL_US_RTSDIS; + control |= rts_paused; if (mctrl & TIOCM_DTR) control |= ATMEL_US_DTREN; @@ -359,23 +383,12 @@ static void atmel_set_mctrl(struct uart_port *port, u_int mctrl) mctrl_gpio_set(atmel_port->gpios, mctrl); /* Local loopback mode? */ - mode = UART_GET_MR(port) & ~ATMEL_US_CHMODE; + mode &= ~ATMEL_US_CHMODE; if (mctrl & TIOCM_LOOP) mode |= ATMEL_US_CHMODE_LOC_LOOP; else mode |= ATMEL_US_CHMODE_NORMAL; - /* Resetting serial mode to RS232 (0x0) */ - mode &= ~ATMEL_US_USMODE; - - if (port->rs485.flags & SER_RS485_ENABLED) { - dev_dbg(port->dev, "Setting UART to RS485\n"); - if ((port->rs485.delay_rts_after_send) > 0) - UART_PUT_TTGR(port, port->rs485.delay_rts_after_send); - mode |= ATMEL_US_USMODE_RS485; - } else { - dev_dbg(port->dev, "Setting UART to RS232\n"); - } UART_PUT_MR(port, mode); } @@ -725,7 +738,11 @@ static void atmel_complete_tx_dma(void *arg) if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) uart_write_wakeup(port); - /* Do we really need this? */ + /* + * xmit is a circular buffer so, if we have just send data from + * xmit->tail to the end of xmit->buf, now we have to transmit the + * remaining data from the beginning of xmit->buf to xmit->head. + */ if (!uart_circ_empty(xmit)) tasklet_schedule(&atmel_port->tasklet); @@ -784,17 +801,17 @@ static void atmel_tx_dma(struct uart_port *port) BUG_ON(!sg_dma_len(sg)); desc = dmaengine_prep_slave_sg(chan, - sg, - 1, - DMA_MEM_TO_DEV, - DMA_PREP_INTERRUPT | - DMA_CTRL_ACK); + sg, + 1, + DMA_MEM_TO_DEV, + DMA_PREP_INTERRUPT | + DMA_CTRL_ACK); if (!desc) { dev_err(port->dev, "Failed to send via dma!\n"); return; } - dma_sync_sg_for_device(port->dev, sg, 1, DMA_MEM_TO_DEV); + dma_sync_sg_for_device(port->dev, sg, 1, DMA_TO_DEVICE); atmel_port->desc_tx = desc; desc->callback = atmel_complete_tx_dma; @@ -927,7 +944,7 @@ static void atmel_rx_from_dma(struct uart_port *port) dma_sync_sg_for_cpu(port->dev, &atmel_port->sg_rx, 1, - DMA_DEV_TO_MEM); + DMA_FROM_DEVICE); /* * ring->head points to the end of data already written by the DMA. @@ -974,7 +991,7 @@ static void atmel_rx_from_dma(struct uart_port *port) dma_sync_sg_for_device(port->dev, &atmel_port->sg_rx, 1, - DMA_DEV_TO_MEM); + DMA_FROM_DEVICE); /* * Drop the lock here since it might end up calling @@ -1012,13 +1029,13 @@ static int atmel_prepare_rx_dma(struct uart_port *port) /* UART circular rx buffer is an aligned page. */ BUG_ON((int)port->state->xmit.buf & ~PAGE_MASK); sg_set_page(&atmel_port->sg_rx, - virt_to_page(ring->buf), - ATMEL_SERIAL_RINGSIZE, - (int)ring->buf & ~PAGE_MASK); - nent = dma_map_sg(port->dev, - &atmel_port->sg_rx, - 1, - DMA_FROM_DEVICE); + virt_to_page(ring->buf), + ATMEL_SERIAL_RINGSIZE, + (int)ring->buf & ~PAGE_MASK); + nent = dma_map_sg(port->dev, + &atmel_port->sg_rx, + 1, + DMA_FROM_DEVICE); if (!nent) { dev_dbg(port->dev, "need to release resource of dma\n"); @@ -1047,11 +1064,11 @@ static int atmel_prepare_rx_dma(struct uart_port *port) * each one is half ring buffer size */ desc = dmaengine_prep_dma_cyclic(atmel_port->chan_rx, - sg_dma_address(&atmel_port->sg_rx), - sg_dma_len(&atmel_port->sg_rx), - sg_dma_len(&atmel_port->sg_rx)/2, - DMA_DEV_TO_MEM, - DMA_PREP_INTERRUPT); + sg_dma_address(&atmel_port->sg_rx), + sg_dma_len(&atmel_port->sg_rx), + sg_dma_len(&atmel_port->sg_rx)/2, + DMA_DEV_TO_MEM, + DMA_PREP_INTERRUPT); desc->callback = atmel_complete_rx_dma; desc->callback_param = port; atmel_port->desc_rx = desc; @@ -1921,12 +1938,14 @@ static void atmel_set_termios(struct uart_port *port, struct ktermios *termios, struct ktermios *old) { unsigned long flags; - unsigned int mode, imr, quot, baud; + unsigned int old_mode, mode, imr, quot, baud; - /* Get current mode register */ - mode = UART_GET_MR(port) & ~(ATMEL_US_USCLKS | ATMEL_US_CHRL - | ATMEL_US_NBSTOP | ATMEL_US_PAR - | ATMEL_US_USMODE); + /* save the current mode register */ + mode = old_mode = UART_GET_MR(port); + + /* reset the mode, clock divisor, parity, stop bits and data size */ + mode &= ~(ATMEL_US_USCLKS | ATMEL_US_CHRL | ATMEL_US_NBSTOP | + ATMEL_US_PAR | ATMEL_US_USMODE); baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk / 16); quot = uart_get_divisor(port, baud); @@ -1971,12 +1990,6 @@ static void atmel_set_termios(struct uart_port *port, struct ktermios *termios, } else mode |= ATMEL_US_PAR_NONE; - /* hardware handshake (RTS/CTS) */ - if (termios->c_cflag & CRTSCTS) - mode |= ATMEL_US_USMODE_HWHS; - else - mode |= ATMEL_US_USMODE_NORMAL; - spin_lock_irqsave(&port->lock, flags); port->read_status_mask = ATMEL_US_OVRE; @@ -2020,18 +2033,40 @@ static void atmel_set_termios(struct uart_port *port, struct ktermios *termios, /* disable receiver and transmitter */ UART_PUT_CR(port, ATMEL_US_TXDIS | ATMEL_US_RXDIS); - /* Resetting serial mode to RS232 (0x0) */ - mode &= ~ATMEL_US_USMODE; - + /* mode */ if (port->rs485.flags & SER_RS485_ENABLED) { if ((port->rs485.delay_rts_after_send) > 0) UART_PUT_TTGR(port, port->rs485.delay_rts_after_send); mode |= ATMEL_US_USMODE_RS485; + } else if (termios->c_cflag & CRTSCTS) { + /* RS232 with hardware handshake (RTS/CTS) */ + mode |= ATMEL_US_USMODE_HWHS; + } else { + /* RS232 without hadware handshake */ + mode |= ATMEL_US_USMODE_NORMAL; } - /* set the parity, stop bits and data size */ + /* set the mode, clock divisor, parity, stop bits and data size */ UART_PUT_MR(port, mode); + /* + * when switching the mode, set the RTS line state according to the + * new mode, otherwise keep the former state + */ + if ((old_mode & ATMEL_US_USMODE) != (mode & ATMEL_US_USMODE)) { + unsigned int rts_state; + + if ((mode & ATMEL_US_USMODE) == ATMEL_US_USMODE_HWHS) { + /* let the hardware control the RTS line */ + rts_state = ATMEL_US_RTSDIS; + } else { + /* force RTS line to low level */ + rts_state = ATMEL_US_RTSEN; + } + + UART_PUT_CR(port, rts_state); + } + /* set the baud rate */ UART_PUT_BRGR(port, quot); UART_PUT_CR(port, ATMEL_US_RSTSTA | ATMEL_US_RSTRX); @@ -2565,7 +2600,7 @@ static int atmel_serial_probe(struct platform_device *pdev) ret = atmel_init_port(port, pdev); if (ret) - goto err; + goto err_clear_bit; if (!atmel_use_pdc_rx(&port->uart)) { ret = -ENOMEM; @@ -2596,6 +2631,12 @@ static int atmel_serial_probe(struct platform_device *pdev) device_init_wakeup(&pdev->dev, 1); platform_set_drvdata(pdev, port); + /* + * The peripheral clock has been disabled by atmel_init_port(): + * enable it before accessing I/O registers + */ + clk_prepare_enable(port->clk); + if (rs485_enabled) { UART_PUT_MR(&port->uart, ATMEL_US_USMODE_NORMAL); UART_PUT_CR(&port->uart, ATMEL_US_RTSEN); @@ -2606,6 +2647,12 @@ static int atmel_serial_probe(struct platform_device *pdev) */ atmel_get_ip_name(&port->uart); + /* + * The peripheral clock can now safely be disabled till the port + * is used + */ + clk_disable_unprepare(port->clk); + return 0; err_add_port: @@ -2616,6 +2663,8 @@ err_alloc_ring: clk_put(port->clk); port->clk = NULL; } +err_clear_bit: + clear_bit(port->uart.line, atmel_ports_in_use); err: return ret; } diff --git a/drivers/tty/serial/digicolor-usart.c b/drivers/tty/serial/digicolor-usart.c new file mode 100644 index 000000000000..a80cdad114f3 --- /dev/null +++ b/drivers/tty/serial/digicolor-usart.c @@ -0,0 +1,560 @@ +/* + * Driver for Conexant Digicolor serial ports (USART) + * + * Author: Baruch Siach <baruch@tkos.co.il> + * + * Copyright (C) 2014 Paradox Innovation Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/module.h> +#include <linux/console.h> +#include <linux/serial_core.h> +#include <linux/serial.h> +#include <linux/clk.h> +#include <linux/io.h> +#include <linux/tty.h> +#include <linux/tty_flip.h> +#include <linux/of.h> +#include <linux/platform_device.h> +#include <linux/workqueue.h> + +#define UA_ENABLE 0x00 +#define UA_ENABLE_ENABLE BIT(0) + +#define UA_CONTROL 0x01 +#define UA_CONTROL_RX_ENABLE BIT(0) +#define UA_CONTROL_TX_ENABLE BIT(1) +#define UA_CONTROL_SOFT_RESET BIT(2) + +#define UA_STATUS 0x02 +#define UA_STATUS_PARITY_ERR BIT(0) +#define UA_STATUS_FRAME_ERR BIT(1) +#define UA_STATUS_OVERRUN_ERR BIT(2) +#define UA_STATUS_TX_READY BIT(6) + +#define UA_CONFIG 0x03 +#define UA_CONFIG_CHAR_LEN BIT(0) +#define UA_CONFIG_STOP_BITS BIT(1) +#define UA_CONFIG_PARITY BIT(2) +#define UA_CONFIG_ODD_PARITY BIT(4) + +#define UA_EMI_REC 0x04 + +#define UA_HBAUD_LO 0x08 +#define UA_HBAUD_HI 0x09 + +#define UA_STATUS_FIFO 0x0a +#define UA_STATUS_FIFO_RX_EMPTY BIT(2) +#define UA_STATUS_FIFO_RX_INT_ALMOST BIT(3) +#define UA_STATUS_FIFO_TX_FULL BIT(4) +#define UA_STATUS_FIFO_TX_INT_ALMOST BIT(7) + +#define UA_CONFIG_FIFO 0x0b +#define UA_CONFIG_FIFO_RX_THRESH 7 +#define UA_CONFIG_FIFO_RX_FIFO_MODE BIT(3) +#define UA_CONFIG_FIFO_TX_FIFO_MODE BIT(7) + +#define UA_INTFLAG_CLEAR 0x1c +#define UA_INTFLAG_SET 0x1d +#define UA_INT_ENABLE 0x1e +#define UA_INT_STATUS 0x1f + +#define UA_INT_TX BIT(0) +#define UA_INT_RX BIT(1) + +#define DIGICOLOR_USART_NR 3 + +/* + * We use the 16 bytes hardware FIFO to buffer Rx traffic. Rx interrupt is + * only produced when the FIFO is filled more than a certain configurable + * threshold. Unfortunately, there is no way to set this threshold below half + * FIFO. This means that we must periodically poll the FIFO status register to + * see whether there are waiting Rx bytes. + */ + +struct digicolor_port { + struct uart_port port; + struct delayed_work rx_poll_work; +}; + +static struct uart_port *digicolor_ports[DIGICOLOR_USART_NR]; + +static bool digicolor_uart_tx_full(struct uart_port *port) +{ + return !!(readb_relaxed(port->membase + UA_STATUS_FIFO) & + UA_STATUS_FIFO_TX_FULL); +} + +static bool digicolor_uart_rx_empty(struct uart_port *port) +{ + return !!(readb_relaxed(port->membase + UA_STATUS_FIFO) & + UA_STATUS_FIFO_RX_EMPTY); +} + +static void digicolor_uart_stop_tx(struct uart_port *port) +{ + u8 int_enable = readb_relaxed(port->membase + UA_INT_ENABLE); + + int_enable &= ~UA_INT_TX; + writeb_relaxed(int_enable, port->membase + UA_INT_ENABLE); +} + +static void digicolor_uart_start_tx(struct uart_port *port) +{ + u8 int_enable = readb_relaxed(port->membase + UA_INT_ENABLE); + + int_enable |= UA_INT_TX; + writeb_relaxed(int_enable, port->membase + UA_INT_ENABLE); +} + +static void digicolor_uart_stop_rx(struct uart_port *port) +{ + u8 int_enable = readb_relaxed(port->membase + UA_INT_ENABLE); + + int_enable &= ~UA_INT_RX; + writeb_relaxed(int_enable, port->membase + UA_INT_ENABLE); +} + +static void digicolor_rx_poll(struct work_struct *work) +{ + struct digicolor_port *dp = + container_of(to_delayed_work(work), + struct digicolor_port, rx_poll_work); + + if (!digicolor_uart_rx_empty(&dp->port)) + /* force RX interrupt */ + writeb_relaxed(UA_INT_RX, dp->port.membase + UA_INTFLAG_SET); + + schedule_delayed_work(&dp->rx_poll_work, msecs_to_jiffies(100)); +} + +static void digicolor_uart_rx(struct uart_port *port) +{ + unsigned long flags; + + spin_lock_irqsave(&port->lock, flags); + + while (1) { + u8 status, ch; + unsigned int ch_flag; + + if (digicolor_uart_rx_empty(port)) + break; + + ch = readb_relaxed(port->membase + UA_EMI_REC); + status = readb_relaxed(port->membase + UA_STATUS); + + port->icount.rx++; + ch_flag = TTY_NORMAL; + + if (status) { + if (status & UA_STATUS_PARITY_ERR) + port->icount.parity++; + else if (status & UA_STATUS_FRAME_ERR) + port->icount.frame++; + else if (status & UA_STATUS_OVERRUN_ERR) + port->icount.overrun++; + + status &= port->read_status_mask; + + if (status & UA_STATUS_PARITY_ERR) + ch_flag = TTY_PARITY; + else if (status & UA_STATUS_FRAME_ERR) + ch_flag = TTY_FRAME; + else if (status & UA_STATUS_OVERRUN_ERR) + ch_flag = TTY_OVERRUN; + } + + if (status & port->ignore_status_mask) + continue; + + uart_insert_char(port, status, UA_STATUS_OVERRUN_ERR, ch, + ch_flag); + } + + spin_unlock_irqrestore(&port->lock, flags); + + tty_flip_buffer_push(&port->state->port); +} + +static void digicolor_uart_tx(struct uart_port *port) +{ + struct circ_buf *xmit = &port->state->xmit; + unsigned long flags; + + if (digicolor_uart_tx_full(port)) + return; + + spin_lock_irqsave(&port->lock, flags); + + if (port->x_char) { + writeb_relaxed(port->x_char, port->membase + UA_EMI_REC); + port->icount.tx++; + port->x_char = 0; + goto out; + } + + if (uart_circ_empty(xmit) || uart_tx_stopped(port)) { + digicolor_uart_stop_tx(port); + goto out; + } + + while (!uart_circ_empty(xmit)) { + writeb(xmit->buf[xmit->tail], port->membase + UA_EMI_REC); + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + port->icount.tx++; + + if (digicolor_uart_tx_full(port)) + break; + } + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(port); + +out: + spin_unlock_irqrestore(&port->lock, flags); +} + +static irqreturn_t digicolor_uart_int(int irq, void *dev_id) +{ + struct uart_port *port = dev_id; + u8 int_status = readb_relaxed(port->membase + UA_INT_STATUS); + + writeb_relaxed(UA_INT_RX | UA_INT_TX, + port->membase + UA_INTFLAG_CLEAR); + + if (int_status & UA_INT_RX) + digicolor_uart_rx(port); + if (int_status & UA_INT_TX) + digicolor_uart_tx(port); + + return IRQ_HANDLED; +} + +static unsigned int digicolor_uart_tx_empty(struct uart_port *port) +{ + u8 status = readb_relaxed(port->membase + UA_STATUS); + + return (status & UA_STATUS_TX_READY) ? TIOCSER_TEMT : 0; +} + +static unsigned int digicolor_uart_get_mctrl(struct uart_port *port) +{ + return TIOCM_CTS; +} + +static void digicolor_uart_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ +} + +static void digicolor_uart_break_ctl(struct uart_port *port, int state) +{ +} + +static int digicolor_uart_startup(struct uart_port *port) +{ + struct digicolor_port *dp = + container_of(port, struct digicolor_port, port); + + writeb_relaxed(UA_ENABLE_ENABLE, port->membase + UA_ENABLE); + writeb_relaxed(UA_CONTROL_SOFT_RESET, port->membase + UA_CONTROL); + writeb_relaxed(0, port->membase + UA_CONTROL); + + writeb_relaxed(UA_CONFIG_FIFO_RX_FIFO_MODE + | UA_CONFIG_FIFO_TX_FIFO_MODE | UA_CONFIG_FIFO_RX_THRESH, + port->membase + UA_CONFIG_FIFO); + writeb_relaxed(UA_STATUS_FIFO_RX_INT_ALMOST, + port->membase + UA_STATUS_FIFO); + writeb_relaxed(UA_CONTROL_RX_ENABLE | UA_CONTROL_TX_ENABLE, + port->membase + UA_CONTROL); + writeb_relaxed(UA_INT_TX | UA_INT_RX, + port->membase + UA_INT_ENABLE); + + schedule_delayed_work(&dp->rx_poll_work, msecs_to_jiffies(100)); + + return 0; +} + +static void digicolor_uart_shutdown(struct uart_port *port) +{ + struct digicolor_port *dp = + container_of(port, struct digicolor_port, port); + + writeb_relaxed(0, port->membase + UA_ENABLE); + cancel_delayed_work_sync(&dp->rx_poll_work); +} + +static void digicolor_uart_set_termios(struct uart_port *port, + struct ktermios *termios, + struct ktermios *old) +{ + unsigned int baud, divisor; + u8 config = 0; + unsigned long flags; + + /* Mask termios capabilities we don't support */ + termios->c_cflag &= ~CMSPAR; + termios->c_iflag &= ~(BRKINT | IGNBRK); + + /* Limit baud rates so that we don't need the fractional divider */ + baud = uart_get_baud_rate(port, termios, old, + port->uartclk / (0x10000*16), + port->uartclk / 256); + divisor = uart_get_divisor(port, baud) - 1; + + switch (termios->c_cflag & CSIZE) { + case CS7: + break; + case CS8: + default: + config |= UA_CONFIG_CHAR_LEN; + break; + } + + if (termios->c_cflag & CSTOPB) + config |= UA_CONFIG_STOP_BITS; + + if (termios->c_cflag & PARENB) { + config |= UA_CONFIG_PARITY; + if (termios->c_cflag & PARODD) + config |= UA_CONFIG_ODD_PARITY; + } + + /* Set read status mask */ + port->read_status_mask = UA_STATUS_OVERRUN_ERR; + if (termios->c_iflag & INPCK) + port->read_status_mask |= UA_STATUS_PARITY_ERR + | UA_STATUS_FRAME_ERR; + + /* Set status ignore mask */ + port->ignore_status_mask = 0; + if (!(termios->c_cflag & CREAD)) + port->ignore_status_mask |= UA_STATUS_OVERRUN_ERR + | UA_STATUS_PARITY_ERR | UA_STATUS_FRAME_ERR; + + spin_lock_irqsave(&port->lock, flags); + + uart_update_timeout(port, termios->c_cflag, baud); + + writeb_relaxed(config, port->membase + UA_CONFIG); + writeb_relaxed(divisor & 0xff, port->membase + UA_HBAUD_LO); + writeb_relaxed(divisor >> 8, port->membase + UA_HBAUD_HI); + + spin_unlock_irqrestore(&port->lock, flags); +} + +static const char *digicolor_uart_type(struct uart_port *port) +{ + return (port->type == PORT_DIGICOLOR) ? "DIGICOLOR USART" : NULL; +} + +static void digicolor_uart_config_port(struct uart_port *port, int flags) +{ + if (flags & UART_CONFIG_TYPE) + port->type = PORT_DIGICOLOR; +} + +static void digicolor_uart_release_port(struct uart_port *port) +{ +} + +static int digicolor_uart_request_port(struct uart_port *port) +{ + return 0; +} + +static const struct uart_ops digicolor_uart_ops = { + .tx_empty = digicolor_uart_tx_empty, + .set_mctrl = digicolor_uart_set_mctrl, + .get_mctrl = digicolor_uart_get_mctrl, + .stop_tx = digicolor_uart_stop_tx, + .start_tx = digicolor_uart_start_tx, + .stop_rx = digicolor_uart_stop_rx, + .break_ctl = digicolor_uart_break_ctl, + .startup = digicolor_uart_startup, + .shutdown = digicolor_uart_shutdown, + .set_termios = digicolor_uart_set_termios, + .type = digicolor_uart_type, + .config_port = digicolor_uart_config_port, + .release_port = digicolor_uart_release_port, + .request_port = digicolor_uart_request_port, +}; + +static void digicolor_uart_console_putchar(struct uart_port *port, int ch) +{ + while (digicolor_uart_tx_full(port)) + cpu_relax(); + + writeb_relaxed(ch, port->membase + UA_EMI_REC); +} + +static void digicolor_uart_console_write(struct console *co, const char *c, + unsigned n) +{ + struct uart_port *port = digicolor_ports[co->index]; + u8 status; + unsigned long flags; + int locked = 1; + + if (oops_in_progress) + locked = spin_trylock_irqsave(&port->lock, flags); + else + spin_lock_irqsave(&port->lock, flags); + + uart_console_write(port, c, n, digicolor_uart_console_putchar); + + if (locked) + spin_unlock_irqrestore(&port->lock, flags); + + /* Wait for transmitter to become empty */ + do { + status = readb_relaxed(port->membase + UA_STATUS); + } while ((status & UA_STATUS_TX_READY) == 0); +} + +static int digicolor_uart_console_setup(struct console *co, char *options) +{ + int baud = 115200, bits = 8, parity = 'n', flow = 'n'; + struct uart_port *port; + + if (co->index < 0 || co->index >= DIGICOLOR_USART_NR) + return -EINVAL; + + port = digicolor_ports[co->index]; + if (!port) + return -ENODEV; + + if (options) + uart_parse_options(options, &baud, &parity, &bits, &flow); + + return uart_set_options(port, co, baud, parity, bits, flow); +} + +static struct console digicolor_console = { + .name = "ttyS", + .device = uart_console_device, + .write = digicolor_uart_console_write, + .setup = digicolor_uart_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, +}; + +static struct uart_driver digicolor_uart = { + .driver_name = "digicolor-usart", + .dev_name = "ttyS", + .nr = DIGICOLOR_USART_NR, +}; + +static int digicolor_uart_probe(struct platform_device *pdev) +{ + struct device_node *np = pdev->dev.of_node; + int ret, index; + struct digicolor_port *dp; + struct resource *res; + struct clk *uart_clk; + + if (!np) { + dev_err(&pdev->dev, "Missing device tree node\n"); + return -ENXIO; + } + + index = of_alias_get_id(np, "serial"); + if (index < 0 || index >= DIGICOLOR_USART_NR) + return -EINVAL; + + dp = devm_kzalloc(&pdev->dev, sizeof(*dp), GFP_KERNEL); + if (!dp) + return -ENOMEM; + + uart_clk = devm_clk_get(&pdev->dev, NULL); + if (IS_ERR(uart_clk)) + return PTR_ERR(uart_clk); + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + dp->port.mapbase = res->start; + dp->port.membase = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(dp->port.membase)) + return PTR_ERR(dp->port.membase); + + dp->port.irq = platform_get_irq(pdev, 0); + if (IS_ERR_VALUE(dp->port.irq)) + return dp->port.irq; + + dp->port.iotype = UPIO_MEM; + dp->port.uartclk = clk_get_rate(uart_clk); + dp->port.fifosize = 16; + dp->port.dev = &pdev->dev; + dp->port.ops = &digicolor_uart_ops; + dp->port.line = index; + dp->port.type = PORT_DIGICOLOR; + spin_lock_init(&dp->port.lock); + + digicolor_ports[index] = &dp->port; + platform_set_drvdata(pdev, &dp->port); + + INIT_DELAYED_WORK(&dp->rx_poll_work, digicolor_rx_poll); + + ret = devm_request_irq(&pdev->dev, dp->port.irq, digicolor_uart_int, 0, + dev_name(&pdev->dev), &dp->port); + if (ret) + return ret; + + return uart_add_one_port(&digicolor_uart, &dp->port); +} + +static int digicolor_uart_remove(struct platform_device *pdev) +{ + struct uart_port *port = platform_get_drvdata(pdev); + + uart_remove_one_port(&digicolor_uart, port); + + return 0; +} + +static const struct of_device_id digicolor_uart_dt_ids[] = { + { .compatible = "cnxt,cx92755-usart", }, + { } +}; +MODULE_DEVICE_TABLE(of, digicolor_uart_dt_ids); + +static struct platform_driver digicolor_uart_platform = { + .driver = { + .name = "digicolor-usart", + .of_match_table = of_match_ptr(digicolor_uart_dt_ids), + }, + .probe = digicolor_uart_probe, + .remove = digicolor_uart_remove, +}; + +static int __init digicolor_uart_init(void) +{ + int ret; + + if (IS_ENABLED(CONFIG_SERIAL_CONEXANT_DIGICOLOR_CONSOLE)) { + digicolor_uart.cons = &digicolor_console; + digicolor_console.data = &digicolor_uart; + } + + ret = uart_register_driver(&digicolor_uart); + if (ret) + return ret; + + return platform_driver_register(&digicolor_uart_platform); +} +module_init(digicolor_uart_init); + +static void __exit digicolor_uart_exit(void) +{ + platform_driver_unregister(&digicolor_uart_platform); + uart_unregister_driver(&digicolor_uart); +} +module_exit(digicolor_uart_exit); + +MODULE_AUTHOR("Baruch Siach <baruch@tkos.co.il>"); +MODULE_DESCRIPTION("Conexant Digicolor USART serial driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/tty/serial/etraxfs-uart.c b/drivers/tty/serial/etraxfs-uart.c new file mode 100644 index 000000000000..a57301a6fe42 --- /dev/null +++ b/drivers/tty/serial/etraxfs-uart.c @@ -0,0 +1,996 @@ +#include <linux/module.h> +#include <linux/init.h> +#include <linux/console.h> +#include <linux/platform_device.h> +#include <linux/serial_core.h> +#include <linux/tty_flip.h> +#include <linux/of.h> +#include <linux/gpio.h> +#include <linux/of_irq.h> +#include <linux/of_address.h> +#include <hwregs/ser_defs.h> + +#define DRV_NAME "etraxfs-uart" +#define UART_NR CONFIG_ETRAX_SERIAL_PORTS + +#define MODIFY_REG(instance, reg, var) \ + do { \ + if (REG_RD_INT(ser, instance, reg) != \ + REG_TYPE_CONV(int, reg_ser_##reg, var)) \ + REG_WR(ser, instance, reg, var); \ + } while (0) + +struct uart_cris_port { + struct uart_port port; + + int initialized; + int irq; + + void __iomem *regi_ser; + + struct gpio_desc *dtr_pin; + struct gpio_desc *dsr_pin; + struct gpio_desc *ri_pin; + struct gpio_desc *cd_pin; + + int write_ongoing; +}; + +static struct uart_driver etraxfs_uart_driver; +static struct uart_port *console_port; +static int console_baud = 115200; +static struct uart_cris_port *etraxfs_uart_ports[UART_NR]; + +static void cris_serial_port_init(struct uart_port *port, int line); +static void etraxfs_uart_stop_rx(struct uart_port *port); +static inline void etraxfs_uart_start_tx_bottom(struct uart_port *port); + +#ifdef CONFIG_SERIAL_ETRAXFS_CONSOLE +static void +cris_console_write(struct console *co, const char *s, unsigned int count) +{ + struct uart_cris_port *up; + int i; + reg_ser_r_stat_din stat; + reg_ser_rw_tr_dma_en tr_dma_en, old; + + up = etraxfs_uart_ports[co->index]; + + if (!up) + return; + + /* Switch to manual mode. */ + tr_dma_en = old = REG_RD(ser, up->regi_ser, rw_tr_dma_en); + if (tr_dma_en.en == regk_ser_yes) { + tr_dma_en.en = regk_ser_no; + REG_WR(ser, up->regi_ser, rw_tr_dma_en, tr_dma_en); + } + + /* Send data. */ + for (i = 0; i < count; i++) { + /* LF -> CRLF */ + if (s[i] == '\n') { + do { + stat = REG_RD(ser, up->regi_ser, r_stat_din); + } while (!stat.tr_rdy); + REG_WR_INT(ser, up->regi_ser, rw_dout, '\r'); + } + /* Wait until transmitter is ready and send. */ + do { + stat = REG_RD(ser, up->regi_ser, r_stat_din); + } while (!stat.tr_rdy); + REG_WR_INT(ser, up->regi_ser, rw_dout, s[i]); + } + + /* Restore mode. */ + if (tr_dma_en.en != old.en) + REG_WR(ser, up->regi_ser, rw_tr_dma_en, old); +} + +static int __init +cris_console_setup(struct console *co, char *options) +{ + struct uart_port *port; + int baud = 115200; + int bits = 8; + int parity = 'n'; + int flow = 'n'; + + if (co->index < 0 || co->index >= UART_NR) + co->index = 0; + port = &etraxfs_uart_ports[co->index]->port; + console_port = port; + + co->flags |= CON_CONSDEV; + + if (options) + uart_parse_options(options, &baud, &parity, &bits, &flow); + console_baud = baud; + cris_serial_port_init(port, co->index); + uart_set_options(port, co, baud, parity, bits, flow); + + return 0; +} + +static struct tty_driver *cris_console_device(struct console *co, int *index) +{ + struct uart_driver *p = co->data; + *index = co->index; + return p->tty_driver; +} + +static struct console cris_console = { + .name = "ttyS", + .write = cris_console_write, + .device = cris_console_device, + .setup = cris_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, + .data = &etraxfs_uart_driver, +}; +#endif /* CONFIG_SERIAL_ETRAXFS_CONSOLE */ + +static struct uart_driver etraxfs_uart_driver = { + .owner = THIS_MODULE, + .driver_name = "serial", + .dev_name = "ttyS", + .major = TTY_MAJOR, + .minor = 64, + .nr = UART_NR, +#ifdef CONFIG_SERIAL_ETRAXFS_CONSOLE + .cons = &cris_console, +#endif /* CONFIG_SERIAL_ETRAXFS_CONSOLE */ +}; + +static inline int crisv32_serial_get_rts(struct uart_cris_port *up) +{ + void __iomem *regi_ser = up->regi_ser; + /* + * Return what the user has controlled rts to or + * what the pin is? (if auto_rts is used it differs during tx) + */ + reg_ser_r_stat_din rstat = REG_RD(ser, regi_ser, r_stat_din); + + return !(rstat.rts_n == regk_ser_active); +} + +/* + * A set = 0 means 3.3V on the pin, bitvalue: 0=active, 1=inactive + * 0=0V , 1=3.3V + */ +static inline void crisv32_serial_set_rts(struct uart_cris_port *up, + int set, int force) +{ + void __iomem *regi_ser = up->regi_ser; + + unsigned long flags; + reg_ser_rw_rec_ctrl rec_ctrl; + + local_irq_save(flags); + rec_ctrl = REG_RD(ser, regi_ser, rw_rec_ctrl); + + if (set) + rec_ctrl.rts_n = regk_ser_active; + else + rec_ctrl.rts_n = regk_ser_inactive; + REG_WR(ser, regi_ser, rw_rec_ctrl, rec_ctrl); + local_irq_restore(flags); +} + +static inline int crisv32_serial_get_cts(struct uart_cris_port *up) +{ + void __iomem *regi_ser = up->regi_ser; + reg_ser_r_stat_din rstat = REG_RD(ser, regi_ser, r_stat_din); + + return (rstat.cts_n == regk_ser_active); +} + +/* + * Send a single character for XON/XOFF purposes. We do it in this separate + * function instead of the alternative support port.x_char, in the ...start_tx + * function, so we don't mix up this case with possibly enabling transmission + * of queued-up data (in case that's disabled after *receiving* an XOFF or + * negative CTS). This function is used for both DMA and non-DMA case; see HW + * docs specifically blessing sending characters manually when DMA for + * transmission is enabled and running. We may be asked to transmit despite + * the transmitter being disabled by a ..._stop_tx call so we need to enable + * it temporarily but restore the state afterwards. + */ +static void etraxfs_uart_send_xchar(struct uart_port *port, char ch) +{ + struct uart_cris_port *up = (struct uart_cris_port *)port; + reg_ser_rw_dout dout = { .data = ch }; + reg_ser_rw_ack_intr ack_intr = { .tr_rdy = regk_ser_yes }; + reg_ser_r_stat_din rstat; + reg_ser_rw_tr_ctrl prev_tr_ctrl, tr_ctrl; + void __iomem *regi_ser = up->regi_ser; + unsigned long flags; + + /* + * Wait for tr_rdy in case a character is already being output. Make + * sure we have integrity between the register reads and the writes + * below, but don't busy-wait with interrupts off and the port lock + * taken. + */ + spin_lock_irqsave(&port->lock, flags); + do { + spin_unlock_irqrestore(&port->lock, flags); + spin_lock_irqsave(&port->lock, flags); + prev_tr_ctrl = tr_ctrl = REG_RD(ser, regi_ser, rw_tr_ctrl); + rstat = REG_RD(ser, regi_ser, r_stat_din); + } while (!rstat.tr_rdy); + + /* + * Ack an interrupt if one was just issued for the previous character + * that was output. This is required for non-DMA as the interrupt is + * used as the only indicator that the transmitter is ready and it + * isn't while this x_char is being transmitted. + */ + REG_WR(ser, regi_ser, rw_ack_intr, ack_intr); + + /* Enable the transmitter in case it was disabled. */ + tr_ctrl.stop = 0; + REG_WR(ser, regi_ser, rw_tr_ctrl, tr_ctrl); + + /* + * Finally, send the blessed character; nothing should stop it now, + * except for an xoff-detected state, which we'll handle below. + */ + REG_WR(ser, regi_ser, rw_dout, dout); + up->port.icount.tx++; + + /* There might be an xoff state to clear. */ + rstat = REG_RD(ser, up->regi_ser, r_stat_din); + + /* + * Clear any xoff state that *may* have been there to + * inhibit transmission of the character. + */ + if (rstat.xoff_detect) { + reg_ser_rw_xoff_clr xoff_clr = { .clr = 1 }; + reg_ser_rw_tr_dma_en tr_dma_en; + + REG_WR(ser, regi_ser, rw_xoff_clr, xoff_clr); + tr_dma_en = REG_RD(ser, regi_ser, rw_tr_dma_en); + + /* + * If we had an xoff state but cleared it, instead sneak in a + * disabled state for the transmitter, after the character we + * sent. Thus we keep the port disabled, just as if the xoff + * state was still in effect (or actually, as if stop_tx had + * been called, as we stop DMA too). + */ + prev_tr_ctrl.stop = 1; + + tr_dma_en.en = 0; + REG_WR(ser, regi_ser, rw_tr_dma_en, tr_dma_en); + } + + /* Restore "previous" enabled/disabled state of the transmitter. */ + REG_WR(ser, regi_ser, rw_tr_ctrl, prev_tr_ctrl); + + spin_unlock_irqrestore(&port->lock, flags); +} + +/* + * Do not spin_lock_irqsave or disable interrupts by other means here; it's + * already done by the caller. + */ +static void etraxfs_uart_start_tx(struct uart_port *port) +{ + struct uart_cris_port *up = (struct uart_cris_port *)port; + + /* we have already done below if a write is ongoing */ + if (up->write_ongoing) + return; + + /* Signal that write is ongoing */ + up->write_ongoing = 1; + + etraxfs_uart_start_tx_bottom(port); +} + +static inline void etraxfs_uart_start_tx_bottom(struct uart_port *port) +{ + struct uart_cris_port *up = (struct uart_cris_port *)port; + void __iomem *regi_ser = up->regi_ser; + reg_ser_rw_tr_ctrl tr_ctrl; + reg_ser_rw_intr_mask intr_mask; + + tr_ctrl = REG_RD(ser, regi_ser, rw_tr_ctrl); + tr_ctrl.stop = regk_ser_no; + REG_WR(ser, regi_ser, rw_tr_ctrl, tr_ctrl); + intr_mask = REG_RD(ser, regi_ser, rw_intr_mask); + intr_mask.tr_rdy = regk_ser_yes; + REG_WR(ser, regi_ser, rw_intr_mask, intr_mask); +} + +/* + * This function handles both the DMA and non-DMA case by ordering the + * transmitter to stop of after the current character. We don't need to wait + * for any such character to be completely transmitted; we do that where it + * matters, like in etraxfs_uart_set_termios. Don't busy-wait here; see + * Documentation/serial/driver: this function is called within + * spin_lock_irq{,save} and thus separate ones would be disastrous (when SMP). + * There's no documented need to set the txd pin to any particular value; + * break setting is controlled solely by etraxfs_uart_break_ctl. + */ +static void etraxfs_uart_stop_tx(struct uart_port *port) +{ + struct uart_cris_port *up = (struct uart_cris_port *)port; + void __iomem *regi_ser = up->regi_ser; + reg_ser_rw_tr_ctrl tr_ctrl; + reg_ser_rw_intr_mask intr_mask; + reg_ser_rw_tr_dma_en tr_dma_en = {0}; + reg_ser_rw_xoff_clr xoff_clr = {0}; + + /* + * For the non-DMA case, we'd get a tr_rdy interrupt that we're not + * interested in as we're not transmitting any characters. For the + * DMA case, that interrupt is already turned off, but no reason to + * waste code on conditionals here. + */ + intr_mask = REG_RD(ser, regi_ser, rw_intr_mask); + intr_mask.tr_rdy = regk_ser_no; + REG_WR(ser, regi_ser, rw_intr_mask, intr_mask); + + tr_ctrl = REG_RD(ser, regi_ser, rw_tr_ctrl); + tr_ctrl.stop = 1; + REG_WR(ser, regi_ser, rw_tr_ctrl, tr_ctrl); + + /* + * Always clear possible hardware xoff-detected state here, no need to + * unnecessary consider mctrl settings and when they change. We clear + * it here rather than in start_tx: both functions are called as the + * effect of XOFF processing, but start_tx is also called when upper + * levels tell the driver that there are more characters to send, so + * avoid adding code there. + */ + xoff_clr.clr = 1; + REG_WR(ser, regi_ser, rw_xoff_clr, xoff_clr); + + /* + * Disable transmitter DMA, so that if we're in XON/XOFF, we can send + * those single characters without also giving go-ahead for queued up + * DMA data. + */ + tr_dma_en.en = 0; + REG_WR(ser, regi_ser, rw_tr_dma_en, tr_dma_en); + + /* + * Make sure that write_ongoing is reset when stopping tx. + */ + up->write_ongoing = 0; +} + +static void etraxfs_uart_stop_rx(struct uart_port *port) +{ + struct uart_cris_port *up = (struct uart_cris_port *)port; + void __iomem *regi_ser = up->regi_ser; + reg_ser_rw_rec_ctrl rec_ctrl = REG_RD(ser, regi_ser, rw_rec_ctrl); + + rec_ctrl.en = regk_ser_no; + REG_WR(ser, regi_ser, rw_rec_ctrl, rec_ctrl); +} + +static void etraxfs_uart_enable_ms(struct uart_port *port) +{ +} + +static void check_modem_status(struct uart_cris_port *up) +{ +} + +static unsigned int etraxfs_uart_tx_empty(struct uart_port *port) +{ + struct uart_cris_port *up = (struct uart_cris_port *)port; + unsigned long flags; + unsigned int ret; + reg_ser_r_stat_din rstat = {0}; + + spin_lock_irqsave(&up->port.lock, flags); + + rstat = REG_RD(ser, up->regi_ser, r_stat_din); + ret = rstat.tr_empty ? TIOCSER_TEMT : 0; + + spin_unlock_irqrestore(&up->port.lock, flags); + return ret; +} +static unsigned int etraxfs_uart_get_mctrl(struct uart_port *port) +{ + struct uart_cris_port *up = (struct uart_cris_port *)port; + unsigned int ret; + + ret = 0; + if (crisv32_serial_get_rts(up)) + ret |= TIOCM_RTS; + /* DTR is active low */ + if (up->dtr_pin && !gpiod_get_raw_value(up->dtr_pin)) + ret |= TIOCM_DTR; + /* CD is active low */ + if (up->cd_pin && !gpiod_get_raw_value(up->cd_pin)) + ret |= TIOCM_CD; + /* RI is active low */ + if (up->ri_pin && !gpiod_get_raw_value(up->ri_pin)) + ret |= TIOCM_RI; + /* DSR is active low */ + if (up->dsr_pin && !gpiod_get_raw_value(up->dsr_pin)) + ret |= TIOCM_DSR; + if (crisv32_serial_get_cts(up)) + ret |= TIOCM_CTS; + return ret; +} + +static void etraxfs_uart_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ + struct uart_cris_port *up = (struct uart_cris_port *)port; + + crisv32_serial_set_rts(up, mctrl & TIOCM_RTS ? 1 : 0, 0); + /* DTR is active low */ + if (up->dtr_pin) + gpiod_set_raw_value(up->dtr_pin, mctrl & TIOCM_DTR ? 0 : 1); + /* RI is active low */ + if (up->ri_pin) + gpiod_set_raw_value(up->ri_pin, mctrl & TIOCM_RNG ? 0 : 1); + /* CD is active low */ + if (up->cd_pin) + gpiod_set_raw_value(up->cd_pin, mctrl & TIOCM_CD ? 0 : 1); +} + +static void etraxfs_uart_break_ctl(struct uart_port *port, int break_state) +{ + struct uart_cris_port *up = (struct uart_cris_port *)port; + unsigned long flags; + reg_ser_rw_tr_ctrl tr_ctrl; + reg_ser_rw_tr_dma_en tr_dma_en; + reg_ser_rw_intr_mask intr_mask; + + spin_lock_irqsave(&up->port.lock, flags); + tr_ctrl = REG_RD(ser, up->regi_ser, rw_tr_ctrl); + tr_dma_en = REG_RD(ser, up->regi_ser, rw_tr_dma_en); + intr_mask = REG_RD(ser, up->regi_ser, rw_intr_mask); + + if (break_state != 0) { /* Send break */ + /* + * We need to disable DMA (if used) or tr_rdy interrupts if no + * DMA. No need to make this conditional on use of DMA; + * disabling will be a no-op for the other mode. + */ + intr_mask.tr_rdy = regk_ser_no; + tr_dma_en.en = 0; + + /* + * Stop transmission and set the txd pin to 0 after the + * current character. The txd setting will take effect after + * any current transmission has completed. + */ + tr_ctrl.stop = 1; + tr_ctrl.txd = 0; + } else { + /* Re-enable the serial interrupt. */ + intr_mask.tr_rdy = regk_ser_yes; + + tr_ctrl.stop = 0; + tr_ctrl.txd = 1; + } + REG_WR(ser, up->regi_ser, rw_tr_ctrl, tr_ctrl); + REG_WR(ser, up->regi_ser, rw_tr_dma_en, tr_dma_en); + REG_WR(ser, up->regi_ser, rw_intr_mask, intr_mask); + + spin_unlock_irqrestore(&up->port.lock, flags); +} + +static void +transmit_chars_no_dma(struct uart_cris_port *up) +{ + int max_count; + struct circ_buf *xmit = &up->port.state->xmit; + + void __iomem *regi_ser = up->regi_ser; + reg_ser_r_stat_din rstat; + reg_ser_rw_ack_intr ack_intr = { .tr_rdy = regk_ser_yes }; + + if (uart_circ_empty(xmit) || uart_tx_stopped(&up->port)) { + /* No more to send, so disable the interrupt. */ + reg_ser_rw_intr_mask intr_mask; + + intr_mask = REG_RD(ser, regi_ser, rw_intr_mask); + intr_mask.tr_rdy = 0; + intr_mask.tr_empty = 0; + REG_WR(ser, regi_ser, rw_intr_mask, intr_mask); + up->write_ongoing = 0; + return; + } + + /* If the serport is fast, we send up to max_count bytes before + exiting the loop. */ + max_count = 64; + do { + reg_ser_rw_dout dout = { .data = xmit->buf[xmit->tail] }; + + REG_WR(ser, regi_ser, rw_dout, dout); + REG_WR(ser, regi_ser, rw_ack_intr, ack_intr); + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE-1); + up->port.icount.tx++; + if (xmit->head == xmit->tail) + break; + rstat = REG_RD(ser, regi_ser, r_stat_din); + } while ((--max_count > 0) && rstat.tr_rdy); + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(&up->port); +} + +static void receive_chars_no_dma(struct uart_cris_port *up) +{ + reg_ser_rs_stat_din stat_din; + reg_ser_r_stat_din rstat; + struct tty_port *port; + struct uart_icount *icount; + int max_count = 16; + char flag; + reg_ser_rw_ack_intr ack_intr = { 0 }; + + rstat = REG_RD(ser, up->regi_ser, r_stat_din); + icount = &up->port.icount; + port = &up->port.state->port; + + do { + stat_din = REG_RD(ser, up->regi_ser, rs_stat_din); + + flag = TTY_NORMAL; + ack_intr.dav = 1; + REG_WR(ser, up->regi_ser, rw_ack_intr, ack_intr); + icount->rx++; + + if (stat_din.framing_err | stat_din.par_err | stat_din.orun) { + if (stat_din.data == 0x00 && + stat_din.framing_err) { + /* Most likely a break. */ + flag = TTY_BREAK; + icount->brk++; + } else if (stat_din.par_err) { + flag = TTY_PARITY; + icount->parity++; + } else if (stat_din.orun) { + flag = TTY_OVERRUN; + icount->overrun++; + } else if (stat_din.framing_err) { + flag = TTY_FRAME; + icount->frame++; + } + } + + /* + * If this becomes important, we probably *could* handle this + * gracefully by keeping track of the unhandled character. + */ + if (!tty_insert_flip_char(port, stat_din.data, flag)) + panic("%s: No tty buffer space", __func__); + rstat = REG_RD(ser, up->regi_ser, r_stat_din); + } while (rstat.dav && (max_count-- > 0)); + spin_unlock(&up->port.lock); + tty_flip_buffer_push(port); + spin_lock(&up->port.lock); +} + +static irqreturn_t +ser_interrupt(int irq, void *dev_id) +{ + struct uart_cris_port *up = (struct uart_cris_port *)dev_id; + void __iomem *regi_ser; + int handled = 0; + + spin_lock(&up->port.lock); + + regi_ser = up->regi_ser; + + if (regi_ser) { + reg_ser_r_masked_intr masked_intr; + + masked_intr = REG_RD(ser, regi_ser, r_masked_intr); + /* + * Check what interrupts are active before taking + * actions. If DMA is used the interrupt shouldn't + * be enabled. + */ + if (masked_intr.dav) { + receive_chars_no_dma(up); + handled = 1; + } + check_modem_status(up); + + if (masked_intr.tr_rdy) { + transmit_chars_no_dma(up); + handled = 1; + } + } + spin_unlock(&up->port.lock); + return IRQ_RETVAL(handled); +} + +#ifdef CONFIG_CONSOLE_POLL +static int etraxfs_uart_get_poll_char(struct uart_port *port) +{ + reg_ser_rs_stat_din stat; + reg_ser_rw_ack_intr ack_intr = { 0 }; + struct uart_cris_port *up = (struct uart_cris_port *)port; + + do { + stat = REG_RD(ser, up->regi_ser, rs_stat_din); + } while (!stat.dav); + + /* Ack the data_avail interrupt. */ + ack_intr.dav = 1; + REG_WR(ser, up->regi_ser, rw_ack_intr, ack_intr); + + return stat.data; +} + +static void etraxfs_uart_put_poll_char(struct uart_port *port, + unsigned char c) +{ + reg_ser_r_stat_din stat; + struct uart_cris_port *up = (struct uart_cris_port *)port; + + do { + stat = REG_RD(ser, up->regi_ser, r_stat_din); + } while (!stat.tr_rdy); + REG_WR_INT(ser, up->regi_ser, rw_dout, c); +} +#endif /* CONFIG_CONSOLE_POLL */ + +static int etraxfs_uart_startup(struct uart_port *port) +{ + struct uart_cris_port *up = (struct uart_cris_port *)port; + unsigned long flags; + reg_ser_rw_intr_mask ser_intr_mask = {0}; + + ser_intr_mask.dav = regk_ser_yes; + + if (request_irq(etraxfs_uart_ports[port->line]->irq, ser_interrupt, + 0, DRV_NAME, etraxfs_uart_ports[port->line])) + panic("irq ser%d", port->line); + + spin_lock_irqsave(&up->port.lock, flags); + + REG_WR(ser, up->regi_ser, rw_intr_mask, ser_intr_mask); + + etraxfs_uart_set_mctrl(&up->port, up->port.mctrl); + + spin_unlock_irqrestore(&up->port.lock, flags); + + return 0; +} + +static void etraxfs_uart_shutdown(struct uart_port *port) +{ + struct uart_cris_port *up = (struct uart_cris_port *)port; + unsigned long flags; + + spin_lock_irqsave(&up->port.lock, flags); + + etraxfs_uart_stop_tx(port); + etraxfs_uart_stop_rx(port); + + free_irq(etraxfs_uart_ports[port->line]->irq, + etraxfs_uart_ports[port->line]); + + etraxfs_uart_set_mctrl(&up->port, up->port.mctrl); + + spin_unlock_irqrestore(&up->port.lock, flags); + +} + +static void +etraxfs_uart_set_termios(struct uart_port *port, struct ktermios *termios, + struct ktermios *old) +{ + struct uart_cris_port *up = (struct uart_cris_port *)port; + unsigned long flags; + reg_ser_rw_xoff xoff; + reg_ser_rw_xoff_clr xoff_clr = {0}; + reg_ser_rw_tr_ctrl tx_ctrl = {0}; + reg_ser_rw_tr_dma_en tx_dma_en = {0}; + reg_ser_rw_rec_ctrl rx_ctrl = {0}; + reg_ser_rw_tr_baud_div tx_baud_div = {0}; + reg_ser_rw_rec_baud_div rx_baud_div = {0}; + int baud; + + if (old && + termios->c_cflag == old->c_cflag && + termios->c_iflag == old->c_iflag) + return; + + /* Tx: 8 bit, no/even parity, 1 stop bit, no cts. */ + tx_ctrl.base_freq = regk_ser_f29_493; + tx_ctrl.en = 0; + tx_ctrl.stop = 0; + tx_ctrl.auto_rts = regk_ser_no; + tx_ctrl.txd = 1; + tx_ctrl.auto_cts = 0; + /* Rx: 8 bit, no/even parity. */ + rx_ctrl.dma_err = regk_ser_stop; + rx_ctrl.sampling = regk_ser_majority; + rx_ctrl.timeout = 1; + + rx_ctrl.rts_n = regk_ser_inactive; + + /* Common for tx and rx: 8N1. */ + tx_ctrl.data_bits = regk_ser_bits8; + rx_ctrl.data_bits = regk_ser_bits8; + tx_ctrl.par = regk_ser_even; + rx_ctrl.par = regk_ser_even; + tx_ctrl.par_en = regk_ser_no; + rx_ctrl.par_en = regk_ser_no; + + tx_ctrl.stop_bits = regk_ser_bits1; + + /* + * Change baud-rate and write it to the hardware. + * + * baud_clock = base_freq / (divisor*8) + * divisor = base_freq / (baud_clock * 8) + * base_freq is either: + * off, ext, 29.493MHz, 32.000 MHz, 32.768 MHz or 100 MHz + * 20.493MHz is used for standard baudrates + */ + + /* + * For the console port we keep the original baudrate here. Not very + * beautiful. + */ + if ((port != console_port) || old) + baud = uart_get_baud_rate(port, termios, old, 0, + port->uartclk / 8); + else + baud = console_baud; + + tx_baud_div.div = 29493000 / (8 * baud); + /* Rx uses same as tx. */ + rx_baud_div.div = tx_baud_div.div; + rx_ctrl.base_freq = tx_ctrl.base_freq; + + if ((termios->c_cflag & CSIZE) == CS7) { + /* Set 7 bit mode. */ + tx_ctrl.data_bits = regk_ser_bits7; + rx_ctrl.data_bits = regk_ser_bits7; + } + + if (termios->c_cflag & CSTOPB) { + /* Set 2 stop bit mode. */ + tx_ctrl.stop_bits = regk_ser_bits2; + } + + if (termios->c_cflag & PARENB) { + /* Enable parity. */ + tx_ctrl.par_en = regk_ser_yes; + rx_ctrl.par_en = regk_ser_yes; + } + + if (termios->c_cflag & CMSPAR) { + if (termios->c_cflag & PARODD) { + /* Set mark parity if PARODD and CMSPAR. */ + tx_ctrl.par = regk_ser_mark; + rx_ctrl.par = regk_ser_mark; + } else { + tx_ctrl.par = regk_ser_space; + rx_ctrl.par = regk_ser_space; + } + } else { + if (termios->c_cflag & PARODD) { + /* Set odd parity. */ + tx_ctrl.par = regk_ser_odd; + rx_ctrl.par = regk_ser_odd; + } + } + + if (termios->c_cflag & CRTSCTS) { + /* Enable automatic CTS handling. */ + tx_ctrl.auto_cts = regk_ser_yes; + } + + /* Make sure the tx and rx are enabled. */ + tx_ctrl.en = regk_ser_yes; + rx_ctrl.en = regk_ser_yes; + + spin_lock_irqsave(&port->lock, flags); + + tx_dma_en.en = 0; + REG_WR(ser, up->regi_ser, rw_tr_dma_en, tx_dma_en); + + /* Actually write the control regs (if modified) to the hardware. */ + uart_update_timeout(port, termios->c_cflag, port->uartclk/8); + MODIFY_REG(up->regi_ser, rw_rec_baud_div, rx_baud_div); + MODIFY_REG(up->regi_ser, rw_rec_ctrl, rx_ctrl); + + MODIFY_REG(up->regi_ser, rw_tr_baud_div, tx_baud_div); + MODIFY_REG(up->regi_ser, rw_tr_ctrl, tx_ctrl); + + tx_dma_en.en = 0; + REG_WR(ser, up->regi_ser, rw_tr_dma_en, tx_dma_en); + + xoff = REG_RD(ser, up->regi_ser, rw_xoff); + + if (up->port.state && up->port.state->port.tty && + (up->port.state->port.tty->termios.c_iflag & IXON)) { + xoff.chr = STOP_CHAR(up->port.state->port.tty); + xoff.automatic = regk_ser_yes; + } else + xoff.automatic = regk_ser_no; + + MODIFY_REG(up->regi_ser, rw_xoff, xoff); + + /* + * Make sure we don't start in an automatically shut-off state due to + * a previous early exit. + */ + xoff_clr.clr = 1; + REG_WR(ser, up->regi_ser, rw_xoff_clr, xoff_clr); + + etraxfs_uart_set_mctrl(&up->port, up->port.mctrl); + spin_unlock_irqrestore(&up->port.lock, flags); +} + +static const char * +etraxfs_uart_type(struct uart_port *port) +{ + return "CRISv32"; +} + +static void etraxfs_uart_release_port(struct uart_port *port) +{ +} + +static int etraxfs_uart_request_port(struct uart_port *port) +{ + return 0; +} + +static void etraxfs_uart_config_port(struct uart_port *port, int flags) +{ + struct uart_cris_port *up = (struct uart_cris_port *)port; + + up->port.type = PORT_CRIS; +} + +static const struct uart_ops etraxfs_uart_pops = { + .tx_empty = etraxfs_uart_tx_empty, + .set_mctrl = etraxfs_uart_set_mctrl, + .get_mctrl = etraxfs_uart_get_mctrl, + .stop_tx = etraxfs_uart_stop_tx, + .start_tx = etraxfs_uart_start_tx, + .send_xchar = etraxfs_uart_send_xchar, + .stop_rx = etraxfs_uart_stop_rx, + .enable_ms = etraxfs_uart_enable_ms, + .break_ctl = etraxfs_uart_break_ctl, + .startup = etraxfs_uart_startup, + .shutdown = etraxfs_uart_shutdown, + .set_termios = etraxfs_uart_set_termios, + .type = etraxfs_uart_type, + .release_port = etraxfs_uart_release_port, + .request_port = etraxfs_uart_request_port, + .config_port = etraxfs_uart_config_port, +#ifdef CONFIG_CONSOLE_POLL + .poll_get_char = etraxfs_uart_get_poll_char, + .poll_put_char = etraxfs_uart_put_poll_char, +#endif +}; + +static void cris_serial_port_init(struct uart_port *port, int line) +{ + struct uart_cris_port *up = (struct uart_cris_port *)port; + + if (up->initialized) + return; + up->initialized = 1; + port->line = line; + spin_lock_init(&port->lock); + port->ops = &etraxfs_uart_pops; + port->irq = up->irq; + port->iobase = (unsigned long) up->regi_ser; + port->uartclk = 29493000; + + /* + * We can't fit any more than 255 here (unsigned char), though + * actually UART_XMIT_SIZE characters could be pending output. + * At time of this writing, the definition of "fifosize" is here the + * amount of characters that can be pending output after a start_tx call + * until tx_empty returns 1: see serial_core.c:uart_wait_until_sent. + * This matters for timeout calculations unfortunately, but keeping + * larger amounts at the DMA wouldn't win much so let's just play nice. + */ + port->fifosize = 255; + port->flags = UPF_BOOT_AUTOCONF; +} + +static int etraxfs_uart_probe(struct platform_device *pdev) +{ + struct device_node *np = pdev->dev.of_node; + struct uart_cris_port *up; + int dev_id; + + if (!np) + return -ENODEV; + + dev_id = of_alias_get_id(np, "serial"); + if (dev_id < 0) + dev_id = 0; + + if (dev_id >= UART_NR) + return -EINVAL; + + if (etraxfs_uart_ports[dev_id]) + return -EBUSY; + + up = devm_kzalloc(&pdev->dev, sizeof(struct uart_cris_port), + GFP_KERNEL); + if (!up) + return -ENOMEM; + + up->irq = irq_of_parse_and_map(np, 0); + up->regi_ser = of_iomap(np, 0); + up->dtr_pin = devm_gpiod_get_optional(&pdev->dev, "dtr"); + up->dsr_pin = devm_gpiod_get_optional(&pdev->dev, "dsr"); + up->ri_pin = devm_gpiod_get_optional(&pdev->dev, "ri"); + up->cd_pin = devm_gpiod_get_optional(&pdev->dev, "cd"); + up->port.dev = &pdev->dev; + cris_serial_port_init(&up->port, dev_id); + + etraxfs_uart_ports[dev_id] = up; + platform_set_drvdata(pdev, &up->port); + uart_add_one_port(&etraxfs_uart_driver, &up->port); + + return 0; +} + +static int etraxfs_uart_remove(struct platform_device *pdev) +{ + struct uart_port *port; + + port = platform_get_drvdata(pdev); + uart_remove_one_port(&etraxfs_uart_driver, port); + etraxfs_uart_ports[pdev->id] = NULL; + + return 0; +} + +static const struct of_device_id etraxfs_uart_dt_ids[] = { + { .compatible = "axis,etraxfs-uart" }, + { /* sentinel */ } +}; + +MODULE_DEVICE_TABLE(of, etraxfs_uart_dt_ids); + +static struct platform_driver etraxfs_uart_platform_driver = { + .driver = { + .name = DRV_NAME, + .of_match_table = of_match_ptr(etraxfs_uart_dt_ids), + }, + .probe = etraxfs_uart_probe, + .remove = etraxfs_uart_remove, +}; + +static int __init etraxfs_uart_init(void) +{ + int ret; + + ret = uart_register_driver(&etraxfs_uart_driver); + if (ret) + return ret; + + ret = platform_driver_register(&etraxfs_uart_platform_driver); + if (ret) + uart_unregister_driver(&etraxfs_uart_driver); + + return ret; +} + +static void __exit etraxfs_uart_exit(void) +{ + platform_driver_unregister(&etraxfs_uart_platform_driver); + uart_unregister_driver(&etraxfs_uart_driver); +} + +module_init(etraxfs_uart_init); +module_exit(etraxfs_uart_exit); diff --git a/drivers/tty/serial/fsl_lpuart.c b/drivers/tty/serial/fsl_lpuart.c index e7cde3a9566d..b1893f3f88f1 100644 --- a/drivers/tty/serial/fsl_lpuart.c +++ b/drivers/tty/serial/fsl_lpuart.c @@ -237,7 +237,8 @@ struct lpuart_port { unsigned int rxfifo_size; bool lpuart32; - bool lpuart_dma_use; + bool lpuart_dma_tx_use; + bool lpuart_dma_rx_use; struct dma_chan *dma_tx_chan; struct dma_chan *dma_rx_chan; struct dma_async_tx_descriptor *dma_tx_desc; @@ -454,6 +455,15 @@ static int lpuart_dma_rx(struct lpuart_port *sport) return 0; } +static void lpuart_flush_buffer(struct uart_port *port) +{ + struct lpuart_port *sport = container_of(port, struct lpuart_port, port); + if (sport->lpuart_dma_tx_use) { + dmaengine_terminate_all(sport->dma_tx_chan); + sport->dma_tx_in_progress = 0; + } +} + static void lpuart_dma_rx_complete(void *arg) { struct lpuart_port *sport = arg; @@ -461,6 +471,7 @@ static void lpuart_dma_rx_complete(void *arg) unsigned long flags; async_tx_ack(sport->dma_rx_desc); + mod_timer(&sport->lpuart_timer, jiffies + sport->dma_rx_timeout); spin_lock_irqsave(&sport->port.lock, flags); @@ -506,9 +517,6 @@ static inline void lpuart_prepare_rx(struct lpuart_port *sport) spin_lock_irqsave(&sport->port.lock, flags); - init_timer(&sport->lpuart_timer); - sport->lpuart_timer.function = lpuart_timer_func; - sport->lpuart_timer.data = (unsigned long)sport; sport->lpuart_timer.expires = jiffies + sport->dma_rx_timeout; add_timer(&sport->lpuart_timer); @@ -571,7 +579,7 @@ static void lpuart_start_tx(struct uart_port *port) temp = readb(port->membase + UARTCR2); writeb(temp | UARTCR2_TIE, port->membase + UARTCR2); - if (sport->lpuart_dma_use) { + if (sport->lpuart_dma_tx_use) { if (!uart_circ_empty(xmit) && !sport->dma_tx_in_progress) lpuart_prepare_tx(sport); } else { @@ -758,19 +766,19 @@ out: static irqreturn_t lpuart_int(int irq, void *dev_id) { struct lpuart_port *sport = dev_id; - unsigned char sts; + unsigned char sts, crdma; sts = readb(sport->port.membase + UARTSR1); + crdma = readb(sport->port.membase + UARTCR5); - if (sts & UARTSR1_RDRF) { - if (sport->lpuart_dma_use) + if (sts & UARTSR1_RDRF && !(crdma & UARTCR5_RDMAS)) { + if (sport->lpuart_dma_rx_use) lpuart_prepare_rx(sport); else lpuart_rxint(irq, dev_id); } - if (sts & UARTSR1_TDRE && - !(readb(sport->port.membase + UARTCR5) & UARTCR5_TDMAS)) { - if (sport->lpuart_dma_use) + if (sts & UARTSR1_TDRE && !(crdma & UARTCR5_TDMAS)) { + if (sport->lpuart_dma_tx_use) lpuart_pio_tx(sport); else lpuart_txint(irq, dev_id); @@ -953,26 +961,17 @@ static int lpuart_dma_tx_request(struct uart_port *port) { struct lpuart_port *sport = container_of(port, struct lpuart_port, port); - struct dma_chan *tx_chan; struct dma_slave_config dma_tx_sconfig; dma_addr_t dma_bus; unsigned char *dma_buf; int ret; - tx_chan = dma_request_slave_channel(sport->port.dev, "tx"); - - if (!tx_chan) { - dev_err(sport->port.dev, "Dma tx channel request failed!\n"); - return -ENODEV; - } - - dma_bus = dma_map_single(tx_chan->device->dev, + dma_bus = dma_map_single(sport->dma_tx_chan->device->dev, sport->port.state->xmit.buf, UART_XMIT_SIZE, DMA_TO_DEVICE); - if (dma_mapping_error(tx_chan->device->dev, dma_bus)) { + if (dma_mapping_error(sport->dma_tx_chan->device->dev, dma_bus)) { dev_err(sport->port.dev, "dma_map_single tx failed\n"); - dma_release_channel(tx_chan); return -ENOMEM; } @@ -981,16 +980,14 @@ static int lpuart_dma_tx_request(struct uart_port *port) dma_tx_sconfig.dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE; dma_tx_sconfig.dst_maxburst = sport->txfifo_size; dma_tx_sconfig.direction = DMA_MEM_TO_DEV; - ret = dmaengine_slave_config(tx_chan, &dma_tx_sconfig); + ret = dmaengine_slave_config(sport->dma_tx_chan, &dma_tx_sconfig); if (ret < 0) { dev_err(sport->port.dev, "Dma slave config failed, err = %d\n", ret); - dma_release_channel(tx_chan); return ret; } - sport->dma_tx_chan = tx_chan; sport->dma_tx_buf_virt = dma_buf; sport->dma_tx_buf_bus = dma_bus; sport->dma_tx_in_progress = 0; @@ -1002,34 +999,24 @@ static int lpuart_dma_rx_request(struct uart_port *port) { struct lpuart_port *sport = container_of(port, struct lpuart_port, port); - struct dma_chan *rx_chan; struct dma_slave_config dma_rx_sconfig; dma_addr_t dma_bus; unsigned char *dma_buf; int ret; - rx_chan = dma_request_slave_channel(sport->port.dev, "rx"); - - if (!rx_chan) { - dev_err(sport->port.dev, "Dma rx channel request failed!\n"); - return -ENODEV; - } - dma_buf = devm_kzalloc(sport->port.dev, FSL_UART_RX_DMA_BUFFER_SIZE, GFP_KERNEL); if (!dma_buf) { dev_err(sport->port.dev, "Dma rx alloc failed\n"); - dma_release_channel(rx_chan); return -ENOMEM; } - dma_bus = dma_map_single(rx_chan->device->dev, dma_buf, + dma_bus = dma_map_single(sport->dma_rx_chan->device->dev, dma_buf, FSL_UART_RX_DMA_BUFFER_SIZE, DMA_FROM_DEVICE); - if (dma_mapping_error(rx_chan->device->dev, dma_bus)) { + if (dma_mapping_error(sport->dma_rx_chan->device->dev, dma_bus)) { dev_err(sport->port.dev, "dma_map_single rx failed\n"); - dma_release_channel(rx_chan); return -ENOMEM; } @@ -1037,16 +1024,14 @@ static int lpuart_dma_rx_request(struct uart_port *port) dma_rx_sconfig.src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE; dma_rx_sconfig.src_maxburst = 1; dma_rx_sconfig.direction = DMA_DEV_TO_MEM; - ret = dmaengine_slave_config(rx_chan, &dma_rx_sconfig); + ret = dmaengine_slave_config(sport->dma_rx_chan, &dma_rx_sconfig); if (ret < 0) { dev_err(sport->port.dev, "Dma slave config failed, err = %d\n", ret); - dma_release_channel(rx_chan); return ret; } - sport->dma_rx_chan = rx_chan; sport->dma_rx_buf_virt = dma_buf; sport->dma_rx_buf_bus = dma_bus; sport->dma_rx_in_progress = 0; @@ -1058,31 +1043,24 @@ static void lpuart_dma_tx_free(struct uart_port *port) { struct lpuart_port *sport = container_of(port, struct lpuart_port, port); - struct dma_chan *dma_chan; dma_unmap_single(sport->port.dev, sport->dma_tx_buf_bus, UART_XMIT_SIZE, DMA_TO_DEVICE); - dma_chan = sport->dma_tx_chan; - sport->dma_tx_chan = NULL; + sport->dma_tx_buf_bus = 0; sport->dma_tx_buf_virt = NULL; - dma_release_channel(dma_chan); } static void lpuart_dma_rx_free(struct uart_port *port) { struct lpuart_port *sport = container_of(port, struct lpuart_port, port); - struct dma_chan *dma_chan; dma_unmap_single(sport->port.dev, sport->dma_rx_buf_bus, FSL_UART_RX_DMA_BUFFER_SIZE, DMA_FROM_DEVICE); - dma_chan = sport->dma_rx_chan; - sport->dma_rx_chan = NULL; sport->dma_rx_buf_bus = 0; sport->dma_rx_buf_virt = NULL; - dma_release_channel(dma_chan); } static int lpuart_startup(struct uart_port *port) @@ -1101,14 +1079,21 @@ static int lpuart_startup(struct uart_port *port) sport->rxfifo_size = 0x1 << (((temp >> UARTPFIFO_RXSIZE_OFF) & UARTPFIFO_FIFOSIZE_MASK) + 1); - /* Whether use dma support by dma request results */ - if (lpuart_dma_tx_request(port) || lpuart_dma_rx_request(port)) { - sport->lpuart_dma_use = false; - } else { - sport->lpuart_dma_use = true; + if (sport->dma_rx_chan && !lpuart_dma_rx_request(port)) { + sport->lpuart_dma_rx_use = true; + setup_timer(&sport->lpuart_timer, lpuart_timer_func, + (unsigned long)sport); + } else + sport->lpuart_dma_rx_use = false; + + + if (sport->dma_tx_chan && !lpuart_dma_tx_request(port)) { + sport->lpuart_dma_tx_use = true; temp = readb(port->membase + UARTCR5); + temp &= ~UARTCR5_RDMAS; writeb(temp | UARTCR5_TDMAS, port->membase + UARTCR5); - } + } else + sport->lpuart_dma_tx_use = false; ret = devm_request_irq(port->dev, port->irq, lpuart_int, 0, DRIVER_NAME, sport); @@ -1179,10 +1164,13 @@ static void lpuart_shutdown(struct uart_port *port) devm_free_irq(port->dev, port->irq, sport); - if (sport->lpuart_dma_use) { - lpuart_dma_tx_free(port); - lpuart_dma_rx_free(port); + if (sport->lpuart_dma_rx_use) { + lpuart_dma_rx_free(&sport->port); + del_timer_sync(&sport->lpuart_timer); } + + if (sport->lpuart_dma_tx_use) + lpuart_dma_tx_free(&sport->port); } static void lpuart32_shutdown(struct uart_port *port) @@ -1304,7 +1292,7 @@ lpuart_set_termios(struct uart_port *port, struct ktermios *termios, /* update the per-port timeout */ uart_update_timeout(port, termios->c_cflag, baud); - if (sport->lpuart_dma_use) { + if (sport->lpuart_dma_rx_use) { /* Calculate delay for 1.5 DMA buffers */ sport->dma_rx_timeout = (sport->port.timeout - HZ / 50) * FSL_UART_RX_DMA_BUFFER_SIZE * 3 / @@ -1517,6 +1505,7 @@ static struct uart_ops lpuart_pops = { .release_port = lpuart_release_port, .config_port = lpuart_config_port, .verify_port = lpuart_verify_port, + .flush_buffer = lpuart_flush_buffer, }; static struct uart_ops lpuart32_pops = { @@ -1535,6 +1524,7 @@ static struct uart_ops lpuart32_pops = { .release_port = lpuart_release_port, .config_port = lpuart_config_port, .verify_port = lpuart_verify_port, + .flush_buffer = lpuart_flush_buffer, }; static struct lpuart_port *lpuart_ports[UART_NR]; @@ -1833,6 +1823,16 @@ static int lpuart_probe(struct platform_device *pdev) return ret; } + sport->dma_tx_chan = dma_request_slave_channel(sport->port.dev, "tx"); + if (!sport->dma_tx_chan) + dev_info(sport->port.dev, "DMA tx channel request failed, " + "operating without tx DMA\n"); + + sport->dma_rx_chan = dma_request_slave_channel(sport->port.dev, "rx"); + if (!sport->dma_rx_chan) + dev_info(sport->port.dev, "DMA rx channel request failed, " + "operating without rx DMA\n"); + return 0; } @@ -1844,6 +1844,12 @@ static int lpuart_remove(struct platform_device *pdev) clk_disable_unprepare(sport->clk); + if (sport->dma_tx_chan) + dma_release_channel(sport->dma_tx_chan); + + if (sport->dma_rx_chan) + dma_release_channel(sport->dma_rx_chan); + return 0; } @@ -1851,6 +1857,19 @@ static int lpuart_remove(struct platform_device *pdev) static int lpuart_suspend(struct device *dev) { struct lpuart_port *sport = dev_get_drvdata(dev); + unsigned long temp; + + if (sport->lpuart32) { + /* disable Rx/Tx and interrupts */ + temp = lpuart32_read(sport->port.membase + UARTCTRL); + temp &= ~(UARTCTRL_TE | UARTCTRL_TIE | UARTCTRL_TCIE); + lpuart32_write(temp, sport->port.membase + UARTCTRL); + } else { + /* disable Rx/Tx and interrupts */ + temp = readb(sport->port.membase + UARTCR2); + temp &= ~(UARTCR2_TE | UARTCR2_TIE | UARTCR2_TCIE); + writeb(temp, sport->port.membase + UARTCR2); + } uart_suspend_port(&lpuart_reg, &sport->port); diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c index 4c5e9092e2d7..0eb29b1c47ac 100644 --- a/drivers/tty/serial/imx.c +++ b/drivers/tty/serial/imx.c @@ -74,6 +74,7 @@ #define IMX21_UTS 0xb4 /* UART Test Register on all other i.mx*/ /* UART Control Register Bit Fields.*/ +#define URXD_DUMMY_READ (1<<16) #define URXD_CHARRDY (1<<15) #define URXD_ERR (1<<14) #define URXD_OVRRUN (1<<13) @@ -463,13 +464,17 @@ static void imx_enable_ms(struct uart_port *port) mod_timer(&sport->timer, jiffies); } +static void imx_dma_tx(struct imx_port *sport); static inline void imx_transmit_buffer(struct imx_port *sport) { struct circ_buf *xmit = &sport->port.state->xmit; + unsigned long temp; if (sport->port.x_char) { /* Send next char */ writel(sport->port.x_char, sport->port.membase + URTX0); + sport->port.icount.tx++; + sport->port.x_char = 0; return; } @@ -478,6 +483,22 @@ static inline void imx_transmit_buffer(struct imx_port *sport) return; } + if (sport->dma_is_enabled) { + /* + * We've just sent a X-char Ensure the TX DMA is enabled + * and the TX IRQ is disabled. + **/ + temp = readl(sport->port.membase + UCR1); + temp &= ~UCR1_TXMPTYEN; + if (sport->dma_is_txing) { + temp |= UCR1_TDMAEN; + writel(temp, sport->port.membase + UCR1); + } else { + writel(temp, sport->port.membase + UCR1); + imx_dma_tx(sport); + } + } + while (!uart_circ_empty(xmit) && !(readl(sport->port.membase + uts_reg(sport)) & UTS_TXFULL)) { /* send xmit->buf[xmit->tail] @@ -500,26 +521,39 @@ static void dma_tx_callback(void *data) struct scatterlist *sgl = &sport->tx_sgl[0]; struct circ_buf *xmit = &sport->port.state->xmit; unsigned long flags; + unsigned long temp; + + spin_lock_irqsave(&sport->port.lock, flags); dma_unmap_sg(sport->port.dev, sgl, sport->dma_tx_nents, DMA_TO_DEVICE); - sport->dma_is_txing = 0; + temp = readl(sport->port.membase + UCR1); + temp &= ~UCR1_TDMAEN; + writel(temp, sport->port.membase + UCR1); /* update the stat */ - spin_lock_irqsave(&sport->port.lock, flags); xmit->tail = (xmit->tail + sport->tx_bytes) & (UART_XMIT_SIZE - 1); sport->port.icount.tx += sport->tx_bytes; - spin_unlock_irqrestore(&sport->port.lock, flags); dev_dbg(sport->port.dev, "we finish the TX DMA.\n"); - uart_write_wakeup(&sport->port); + sport->dma_is_txing = 0; + + spin_unlock_irqrestore(&sport->port.lock, flags); + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(&sport->port); if (waitqueue_active(&sport->dma_wait)) { wake_up(&sport->dma_wait); dev_dbg(sport->port.dev, "exit in %s.\n", __func__); return; } + + spin_lock_irqsave(&sport->port.lock, flags); + if (!uart_circ_empty(xmit) && !uart_tx_stopped(&sport->port)) + imx_dma_tx(sport); + spin_unlock_irqrestore(&sport->port.lock, flags); } static void imx_dma_tx(struct imx_port *sport) @@ -529,24 +563,23 @@ static void imx_dma_tx(struct imx_port *sport) struct dma_async_tx_descriptor *desc; struct dma_chan *chan = sport->dma_chan_tx; struct device *dev = sport->port.dev; - enum dma_status status; + unsigned long temp; int ret; - status = dmaengine_tx_status(chan, (dma_cookie_t)0, NULL); - if (DMA_IN_PROGRESS == status) + if (sport->dma_is_txing) return; sport->tx_bytes = uart_circ_chars_pending(xmit); - if (xmit->tail > xmit->head && xmit->head > 0) { + if (xmit->tail < xmit->head) { + sport->dma_tx_nents = 1; + sg_init_one(sgl, xmit->buf + xmit->tail, sport->tx_bytes); + } else { sport->dma_tx_nents = 2; sg_init_table(sgl, 2); sg_set_buf(sgl, xmit->buf + xmit->tail, UART_XMIT_SIZE - xmit->tail); sg_set_buf(sgl + 1, xmit->buf, xmit->head); - } else { - sport->dma_tx_nents = 1; - sg_init_one(sgl, xmit->buf + xmit->tail, sport->tx_bytes); } ret = dma_map_sg(dev, sgl, sport->dma_tx_nents, DMA_TO_DEVICE); @@ -557,6 +590,8 @@ static void imx_dma_tx(struct imx_port *sport) desc = dmaengine_prep_slave_sg(chan, sgl, sport->dma_tx_nents, DMA_MEM_TO_DEV, DMA_PREP_INTERRUPT); if (!desc) { + dma_unmap_sg(dev, sgl, sport->dma_tx_nents, + DMA_TO_DEVICE); dev_err(dev, "We cannot prepare for the TX slave dma!\n"); return; } @@ -565,6 +600,11 @@ static void imx_dma_tx(struct imx_port *sport) dev_dbg(dev, "TX: prepare to send %lu bytes by DMA.\n", uart_circ_chars_pending(xmit)); + + temp = readl(sport->port.membase + UCR1); + temp |= UCR1_TDMAEN; + writel(temp, sport->port.membase + UCR1); + /* fire it */ sport->dma_is_txing = 1; dmaengine_submit(desc); @@ -590,13 +630,6 @@ static void imx_start_tx(struct uart_port *port) temp &= ~(UCR1_RRDYEN); writel(temp, sport->port.membase + UCR1); } - /* Clear any pending ORE flag before enabling interrupt */ - temp = readl(sport->port.membase + USR2); - writel(temp | USR2_ORE, sport->port.membase + USR2); - - temp = readl(sport->port.membase + UCR4); - temp |= UCR4_OREN; - writel(temp, sport->port.membase + UCR4); if (!sport->dma_is_enabled) { temp = readl(sport->port.membase + UCR1); @@ -614,15 +647,21 @@ static void imx_start_tx(struct uart_port *port) } if (sport->dma_is_enabled) { - /* FIXME: port->x_char must be transmitted if != 0 */ + if (sport->port.x_char) { + /* We have X-char to send, so enable TX IRQ and + * disable TX DMA to let TX interrupt to send X-char */ + temp = readl(sport->port.membase + UCR1); + temp &= ~UCR1_TDMAEN; + temp |= UCR1_TXMPTYEN; + writel(temp, sport->port.membase + UCR1); + return; + } + if (!uart_circ_empty(&port->state->xmit) && !uart_tx_stopped(port)) imx_dma_tx(sport); return; } - - if (readl(sport->port.membase + uts_reg(sport)) & UTS_TXEMPTY) - imx_transmit_buffer(sport); } static irqreturn_t imx_rtsint(int irq, void *dev_id) @@ -694,7 +733,7 @@ static irqreturn_t imx_rxint(int irq, void *dev_id) continue; } - rx &= sport->port.read_status_mask; + rx &= (sport->port.read_status_mask | 0xFF); if (rx & URXD_BRK) flg = TTY_BREAK; @@ -710,6 +749,9 @@ static irqreturn_t imx_rxint(int irq, void *dev_id) #endif } + if (sport->port.ignore_status_mask & URXD_DUMMY_READ) + goto out; + tty_insert_flip_char(port, rx, flg); } @@ -727,6 +769,9 @@ static int start_rx_dma(struct imx_port *sport); static void imx_dma_rxint(struct imx_port *sport) { unsigned long temp; + unsigned long flags; + + spin_lock_irqsave(&sport->port.lock, flags); temp = readl(sport->port.membase + USR2); if ((temp & USR2_RDR) && !sport->dma_is_rxing) { @@ -740,6 +785,8 @@ static void imx_dma_rxint(struct imx_port *sport) /* tell the DMA to receive the data. */ start_rx_dma(sport); } + + spin_unlock_irqrestore(&sport->port.lock, flags); } static irqreturn_t imx_int(int irq, void *dev_id) @@ -869,6 +916,9 @@ static int imx_setup_ufcr(struct imx_port *sport, unsigned int mode) static void imx_rx_dma_done(struct imx_port *sport) { unsigned long temp; + unsigned long flags; + + spin_lock_irqsave(&sport->port.lock, flags); /* Enable this interrupt when the RXFIFO is empty. */ temp = readl(sport->port.membase + UCR1); @@ -880,6 +930,8 @@ static void imx_rx_dma_done(struct imx_port *sport) /* Is the shutdown waiting for us? */ if (waitqueue_active(&sport->dma_wait)) wake_up(&sport->dma_wait); + + spin_unlock_irqrestore(&sport->port.lock, flags); } /* @@ -910,12 +962,26 @@ static void dma_rx_callback(void *data) dev_dbg(sport->port.dev, "We get %d bytes.\n", count); if (count) { - tty_insert_flip_string(port, sport->rx_buf, count); + if (!(sport->port.ignore_status_mask & URXD_DUMMY_READ)) + tty_insert_flip_string(port, sport->rx_buf, count); tty_flip_buffer_push(port); start_rx_dma(sport); - } else + } else if (readl(sport->port.membase + USR2) & USR2_RDR) { + /* + * start rx_dma directly once data in RXFIFO, more efficient + * than before: + * 1. call imx_rx_dma_done to stop dma if no data received + * 2. wait next RDR interrupt to start dma transfer. + */ + start_rx_dma(sport); + } else { + /* + * stop dma to prevent too many IDLE event trigged if no data + * in RXFIFO + */ imx_rx_dma_done(sport); + } } static int start_rx_dma(struct imx_port *sport) @@ -935,6 +1001,7 @@ static int start_rx_dma(struct imx_port *sport) desc = dmaengine_prep_slave_sg(chan, sgl, 1, DMA_DEV_TO_MEM, DMA_PREP_INTERRUPT); if (!desc) { + dma_unmap_sg(dev, sgl, 1, DMA_FROM_DEVICE); dev_err(dev, "We cannot prepare for the RX slave dma!\n"); return -EINVAL; } @@ -1108,12 +1175,20 @@ static int imx_startup(struct uart_port *port) while (!(readl(sport->port.membase + UCR2) & UCR2_SRST) && (--i > 0)) udelay(1); + /* Can we enable the DMA support? */ + if (is_imx6q_uart(sport) && !uart_console(port) && + !sport->dma_is_inited) + imx_uart_dma_init(sport); + spin_lock_irqsave(&sport->port.lock, flags); /* * Finally, clear and enable interrupts */ writel(USR1_RTSD, sport->port.membase + USR1); + if (sport->dma_is_inited && !sport->dma_is_enabled) + imx_enable_dma(sport); + temp = readl(sport->port.membase + UCR1); temp |= UCR1_RRDYEN | UCR1_RTSDEN | UCR1_UARTEN; @@ -1124,6 +1199,14 @@ static int imx_startup(struct uart_port *port) writel(temp, sport->port.membase + UCR1); + /* Clear any pending ORE flag before enabling interrupt */ + temp = readl(sport->port.membase + USR2); + writel(temp | USR2_ORE, sport->port.membase + USR2); + + temp = readl(sport->port.membase + UCR4); + temp |= UCR4_OREN; + writel(temp, sport->port.membase + UCR4); + temp = readl(sport->port.membase + UCR2); temp |= (UCR2_RXEN | UCR2_TXEN); if (!sport->have_rtscts) @@ -1189,9 +1272,11 @@ static void imx_shutdown(struct uart_port *port) dmaengine_terminate_all(sport->dma_chan_tx); dmaengine_terminate_all(sport->dma_chan_rx); } + spin_lock_irqsave(&sport->port.lock, flags); imx_stop_tx(port); imx_stop_rx(port); imx_disable_dma(sport); + spin_unlock_irqrestore(&sport->port.lock, flags); imx_uart_dma_exit(sport); } @@ -1233,11 +1318,48 @@ static void imx_shutdown(struct uart_port *port) static void imx_flush_buffer(struct uart_port *port) { struct imx_port *sport = (struct imx_port *)port; + struct scatterlist *sgl = &sport->tx_sgl[0]; + unsigned long temp; + int i = 100, ubir, ubmr, ubrc, uts; - if (sport->dma_is_enabled) { - sport->tx_bytes = 0; - dmaengine_terminate_all(sport->dma_chan_tx); + if (!sport->dma_chan_tx) + return; + + sport->tx_bytes = 0; + dmaengine_terminate_all(sport->dma_chan_tx); + if (sport->dma_is_txing) { + dma_unmap_sg(sport->port.dev, sgl, sport->dma_tx_nents, + DMA_TO_DEVICE); + temp = readl(sport->port.membase + UCR1); + temp &= ~UCR1_TDMAEN; + writel(temp, sport->port.membase + UCR1); + sport->dma_is_txing = false; } + + /* + * According to the Reference Manual description of the UART SRST bit: + * "Reset the transmit and receive state machines, + * all FIFOs and register USR1, USR2, UBIR, UBMR, UBRC, URXD, UTXD + * and UTS[6-3]". As we don't need to restore the old values from + * USR1, USR2, URXD, UTXD, only save/restore the other four registers + */ + ubir = readl(sport->port.membase + UBIR); + ubmr = readl(sport->port.membase + UBMR); + ubrc = readl(sport->port.membase + UBRC); + uts = readl(sport->port.membase + IMX21_UTS); + + temp = readl(sport->port.membase + UCR2); + temp &= ~UCR2_SRST; + writel(temp, sport->port.membase + UCR2); + + while (!(readl(sport->port.membase + UCR2) & UCR2_SRST) && (--i > 0)) + udelay(1); + + /* Restore the registers */ + writel(ubir, sport->port.membase + UBIR); + writel(ubmr, sport->port.membase + UBMR); + writel(ubrc, sport->port.membase + UBRC); + writel(uts, sport->port.membase + IMX21_UTS); } static void @@ -1280,11 +1402,6 @@ imx_set_termios(struct uart_port *port, struct ktermios *termios, if (sport->have_rtscts) { ucr2 &= ~UCR2_IRTS; ucr2 |= UCR2_CTSC; - - /* Can we enable the DMA support? */ - if (is_imx6q_uart(sport) && !uart_console(port) - && !sport->dma_is_inited) - imx_uart_dma_init(sport); } else { termios->c_cflag &= ~CRTSCTS; } @@ -1319,7 +1436,7 @@ imx_set_termios(struct uart_port *port, struct ktermios *termios, */ sport->port.ignore_status_mask = 0; if (termios->c_iflag & IGNPAR) - sport->port.ignore_status_mask |= URXD_PRERR; + sport->port.ignore_status_mask |= URXD_PRERR | URXD_FRMERR; if (termios->c_iflag & IGNBRK) { sport->port.ignore_status_mask |= URXD_BRK; /* @@ -1330,6 +1447,9 @@ imx_set_termios(struct uart_port *port, struct ktermios *termios, sport->port.ignore_status_mask |= URXD_OVRRUN; } + if ((termios->c_cflag & CREAD) == 0) + sport->port.ignore_status_mask |= URXD_DUMMY_READ; + /* * Update the per-port timeout. */ @@ -1403,8 +1523,6 @@ imx_set_termios(struct uart_port *port, struct ktermios *termios, if (UART_ENABLE_MS(&sport->port, termios->c_cflag)) imx_enable_ms(&sport->port); - if (sport->dma_is_inited && !sport->dma_is_enabled) - imx_enable_dma(sport); spin_unlock_irqrestore(&sport->port.lock, flags); } diff --git a/drivers/tty/serial/mcf.c b/drivers/tty/serial/mcf.c index 10496672dfdb..a9b0ab38a68c 100644 --- a/drivers/tty/serial/mcf.c +++ b/drivers/tty/serial/mcf.c @@ -3,7 +3,7 @@ /* * mcf.c -- Freescale ColdFire UART driver * - * (C) Copyright 2003-2007, Greg Ungerer <gerg@snapgear.com> + * (C) Copyright 2003-2007, Greg Ungerer <gerg@uclinux.org> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -198,7 +198,6 @@ static void mcf_shutdown(struct uart_port *port) static void mcf_set_termios(struct uart_port *port, struct ktermios *termios, struct ktermios *old) { - struct mcf_uart *pp = container_of(port, struct mcf_uart, port); unsigned long flags; unsigned int baud, baudclk; #if defined(CONFIG_M5272) @@ -441,7 +440,6 @@ static int mcf_verify_port(struct uart_port *port, struct serial_struct *ser) /* Enable or disable the RS485 support */ static int mcf_config_rs485(struct uart_port *port, struct serial_rs485 *rs485) { - struct mcf_uart *pp = container_of(port, struct mcf_uart, port); unsigned char mr1, mr2; /* Get mode registers */ @@ -631,6 +629,7 @@ static int mcf_probe(struct platform_device *pdev) port->mapbase = platp[i].mapbase; port->membase = (platp[i].membase) ? platp[i].membase : (unsigned char __iomem *) platp[i].mapbase; + port->dev = &pdev->dev; port->iotype = SERIAL_IO_MEM; port->irq = platp[i].irq; port->uartclk = MCF_BUSCLK; @@ -702,7 +701,7 @@ static void __exit mcf_exit(void) module_init(mcf_init); module_exit(mcf_exit); -MODULE_AUTHOR("Greg Ungerer <gerg@snapgear.com>"); +MODULE_AUTHOR("Greg Ungerer <gerg@uclinux.org>"); MODULE_DESCRIPTION("Freescale ColdFire UART driver"); MODULE_LICENSE("GPL"); MODULE_ALIAS("platform:mcfuart"); diff --git a/drivers/tty/serial/men_z135_uart.c b/drivers/tty/serial/men_z135_uart.c index 517cd073dc08..35c55505b3eb 100644 --- a/drivers/tty/serial/men_z135_uart.c +++ b/drivers/tty/serial/men_z135_uart.c @@ -23,7 +23,6 @@ #define MEN_Z135_MAX_PORTS 12 #define MEN_Z135_BASECLK 29491200 #define MEN_Z135_FIFO_SIZE 1024 -#define MEN_Z135_NUM_MSI_VECTORS 2 #define MEN_Z135_FIFO_WATERMARK 1020 #define MEN_Z135_STAT_REG 0x0 @@ -34,12 +33,11 @@ #define MEN_Z135_CONF_REG 0x808 #define MEN_Z135_UART_FREQ 0x80c #define MEN_Z135_BAUD_REG 0x810 -#define MENZ135_TIMEOUT 0x814 +#define MEN_Z135_TIMEOUT 0x814 #define MEN_Z135_MEM_SIZE 0x818 -#define IS_IRQ(x) ((x) & 1) -#define IRQ_ID(x) (((x) >> 1) & 7) +#define IRQ_ID(x) ((x) & 0x1f) #define MEN_Z135_IER_RXCIEN BIT(0) /* RX Space IRQ */ #define MEN_Z135_IER_TXCIEN BIT(1) /* TX Space IRQ */ @@ -94,11 +92,11 @@ #define MEN_Z135_LSR_TEXP BIT(6) #define MEN_Z135_LSR_RXFIFOERR BIT(7) -#define MEN_Z135_IRQ_ID_MST 0 -#define MEN_Z135_IRQ_ID_TSA 1 -#define MEN_Z135_IRQ_ID_RDA 2 -#define MEN_Z135_IRQ_ID_RLS 3 -#define MEN_Z135_IRQ_ID_CTI 6 +#define MEN_Z135_IRQ_ID_RLS BIT(0) +#define MEN_Z135_IRQ_ID_RDA BIT(1) +#define MEN_Z135_IRQ_ID_CTI BIT(2) +#define MEN_Z135_IRQ_ID_TSA BIT(3) +#define MEN_Z135_IRQ_ID_MST BIT(4) #define LCR(x) (((x) >> MEN_Z135_LCR_SHIFT) & 0xff) @@ -118,12 +116,18 @@ static int align; module_param(align, int, S_IRUGO); MODULE_PARM_DESC(align, "Keep hardware FIFO write pointer aligned, default 0"); +static uint rx_timeout; +module_param(rx_timeout, uint, S_IRUGO); +MODULE_PARM_DESC(rx_timeout, "RX timeout. " + "Timeout in seconds = (timeout_reg * baud_reg * 4) / freq_reg"); + struct men_z135_port { struct uart_port port; struct mcb_device *mdev; unsigned char *rxbuf; u32 stat_reg; spinlock_t lock; + bool automode; }; #define to_men_z135(port) container_of((port), struct men_z135_port, port) @@ -180,12 +184,16 @@ static inline void men_z135_reg_clr(struct men_z135_port *uart, */ static void men_z135_handle_modem_status(struct men_z135_port *uart) { - if (uart->stat_reg & MEN_Z135_MSR_DDCD) + u8 msr; + + msr = (uart->stat_reg >> 8) & 0xff; + + if (msr & MEN_Z135_MSR_DDCD) uart_handle_dcd_change(&uart->port, - uart->stat_reg & ~MEN_Z135_MSR_DCD); - if (uart->stat_reg & MEN_Z135_MSR_DCTS) + msr & MEN_Z135_MSR_DCD); + if (msr & MEN_Z135_MSR_DCTS) uart_handle_cts_change(&uart->port, - uart->stat_reg & ~MEN_Z135_MSR_CTS); + msr & MEN_Z135_MSR_CTS); } static void men_z135_handle_lsr(struct men_z135_port *uart) @@ -322,7 +330,8 @@ static void men_z135_handle_tx(struct men_z135_port *uart) txfree = MEN_Z135_FIFO_WATERMARK - txc; if (txfree <= 0) { - pr_err("Not enough room in TX FIFO have %d, need %d\n", + dev_err(&uart->mdev->dev, + "Not enough room in TX FIFO have %d, need %d\n", txfree, qlen); goto irq_en; } @@ -373,43 +382,54 @@ out: * @irq: The IRQ number * @data: Pointer to UART port * - * Check IIR register to see which tasklet to start. + * Check IIR register to find the cause of the interrupt and handle it. + * It is possible that multiple interrupts reason bits are set and reading + * the IIR is a destructive read, so we always need to check for all possible + * interrupts and handle them. */ static irqreturn_t men_z135_intr(int irq, void *data) { struct men_z135_port *uart = (struct men_z135_port *)data; struct uart_port *port = &uart->port; + bool handled = false; + unsigned long flags; int irq_id; uart->stat_reg = ioread32(port->membase + MEN_Z135_STAT_REG); - /* IRQ pending is low active */ - if (IS_IRQ(uart->stat_reg)) - return IRQ_NONE; - irq_id = IRQ_ID(uart->stat_reg); - switch (irq_id) { - case MEN_Z135_IRQ_ID_MST: - men_z135_handle_modem_status(uart); - break; - case MEN_Z135_IRQ_ID_TSA: - men_z135_handle_tx(uart); - break; - case MEN_Z135_IRQ_ID_CTI: - dev_dbg(&uart->mdev->dev, "Character Timeout Indication\n"); - /* Fallthrough */ - case MEN_Z135_IRQ_ID_RDA: - /* Reading data clears RX IRQ */ - men_z135_handle_rx(uart); - break; - case MEN_Z135_IRQ_ID_RLS: + + if (!irq_id) + goto out; + + spin_lock_irqsave(&port->lock, flags); + /* It's save to write to IIR[7:6] RXC[9:8] */ + iowrite8(irq_id, port->membase + MEN_Z135_STAT_REG); + + if (irq_id & MEN_Z135_IRQ_ID_RLS) { men_z135_handle_lsr(uart); - break; - default: - dev_warn(&uart->mdev->dev, "Unknown IRQ id %d\n", irq_id); - return IRQ_NONE; + handled = true; + } + + if (irq_id & (MEN_Z135_IRQ_ID_RDA | MEN_Z135_IRQ_ID_CTI)) { + if (irq_id & MEN_Z135_IRQ_ID_CTI) + dev_dbg(&uart->mdev->dev, "Character Timeout Indication\n"); + men_z135_handle_rx(uart); + handled = true; + } + + if (irq_id & MEN_Z135_IRQ_ID_TSA) { + men_z135_handle_tx(uart); + handled = true; } - return IRQ_HANDLED; + if (irq_id & MEN_Z135_IRQ_ID_MST) { + men_z135_handle_modem_status(uart); + handled = true; + } + + spin_unlock_irqrestore(&port->lock, flags); +out: + return IRQ_RETVAL(handled); } /** @@ -464,21 +484,37 @@ static unsigned int men_z135_tx_empty(struct uart_port *port) */ static void men_z135_set_mctrl(struct uart_port *port, unsigned int mctrl) { - struct men_z135_port *uart = to_men_z135(port); - u32 conf_reg = 0; + u32 old; + u32 conf_reg; + conf_reg = old = ioread32(port->membase + MEN_Z135_CONF_REG); if (mctrl & TIOCM_RTS) conf_reg |= MEN_Z135_MCR_RTS; + else + conf_reg &= ~MEN_Z135_MCR_RTS; + if (mctrl & TIOCM_DTR) conf_reg |= MEN_Z135_MCR_DTR; + else + conf_reg &= ~MEN_Z135_MCR_DTR; + if (mctrl & TIOCM_OUT1) conf_reg |= MEN_Z135_MCR_OUT1; + else + conf_reg &= ~MEN_Z135_MCR_OUT1; + if (mctrl & TIOCM_OUT2) conf_reg |= MEN_Z135_MCR_OUT2; + else + conf_reg &= ~MEN_Z135_MCR_OUT2; + if (mctrl & TIOCM_LOOP) conf_reg |= MEN_Z135_MCR_LOOP; + else + conf_reg &= ~MEN_Z135_MCR_LOOP; - men_z135_reg_set(uart, MEN_Z135_CONF_REG, conf_reg); + if (conf_reg != old) + iowrite32(conf_reg, port->membase + MEN_Z135_CONF_REG); } /** @@ -490,12 +526,9 @@ static void men_z135_set_mctrl(struct uart_port *port, unsigned int mctrl) static unsigned int men_z135_get_mctrl(struct uart_port *port) { unsigned int mctrl = 0; - u32 stat_reg; u8 msr; - stat_reg = ioread32(port->membase + MEN_Z135_STAT_REG); - - msr = ~((stat_reg >> 8) & 0xff); + msr = ioread8(port->membase + MEN_Z135_STAT_REG + 1); if (msr & MEN_Z135_MSR_CTS) mctrl |= TIOCM_CTS; @@ -524,6 +557,19 @@ static void men_z135_stop_tx(struct uart_port *port) men_z135_reg_clr(uart, MEN_Z135_CONF_REG, MEN_Z135_IER_TXCIEN); } +/* + * men_z135_disable_ms() - Disable Modem Status + * port: The UART port + * + * Enable Modem Status IRQ. + */ +static void men_z135_disable_ms(struct uart_port *port) +{ + struct men_z135_port *uart = to_men_z135(port); + + men_z135_reg_clr(uart, MEN_Z135_CONF_REG, MEN_Z135_IER_MSIEN); +} + /** * men_z135_start_tx() - Start transmitting characters * @port: The UART port @@ -535,6 +581,9 @@ static void men_z135_start_tx(struct uart_port *port) { struct men_z135_port *uart = to_men_z135(port); + if (uart->automode) + men_z135_disable_ms(port); + men_z135_handle_tx(uart); } @@ -584,6 +633,9 @@ static int men_z135_startup(struct uart_port *port) iowrite32(conf_reg, port->membase + MEN_Z135_CONF_REG); + if (rx_timeout) + iowrite32(rx_timeout, port->membase + MEN_Z135_TIMEOUT); + return 0; } @@ -603,6 +655,7 @@ static void men_z135_set_termios(struct uart_port *port, struct ktermios *termios, struct ktermios *old) { + struct men_z135_port *uart = to_men_z135(port); unsigned int baud; u32 conf_reg; u32 bd_reg; @@ -643,6 +696,16 @@ static void men_z135_set_termios(struct uart_port *port, } else lcr |= MEN_Z135_PAR_DIS << MEN_Z135_PEN_SHIFT; + conf_reg |= MEN_Z135_IER_MSIEN; + if (termios->c_cflag & CRTSCTS) { + conf_reg |= MEN_Z135_MCR_RCFC; + uart->automode = true; + termios->c_cflag &= ~CLOCAL; + } else { + conf_reg &= ~MEN_Z135_MCR_RCFC; + uart->automode = false; + } + termios->c_cflag &= ~CMSPAR; /* Mark/Space parity is not supported */ conf_reg |= lcr << MEN_Z135_LCR_SHIFT; diff --git a/drivers/tty/serial/mrst_max3110.c b/drivers/tty/serial/mrst_max3110.c deleted file mode 100644 index 77239d5e620d..000000000000 --- a/drivers/tty/serial/mrst_max3110.c +++ /dev/null @@ -1,909 +0,0 @@ -/* - * mrst_max3110.c - spi uart protocol driver for Maxim 3110 - * - * Copyright (c) 2008-2010, Intel Corporation. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - */ - -/* - * Note: - * 1. From Max3110 spec, the Rx FIFO has 8 words, while the Tx FIFO only has - * 1 word. If SPI master controller doesn't support sclk frequency change, - * then the char need be sent out one by one with some delay - * - * 2. Currently only RX available interrupt is used, no need for waiting TXE - * interrupt for a low speed UART device - */ - -#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt - -#ifdef CONFIG_MAGIC_SYSRQ -#define SUPPORT_SYSRQ -#endif - -#include <linux/module.h> -#include <linux/ioport.h> -#include <linux/irq.h> -#include <linux/init.h> -#include <linux/console.h> -#include <linux/tty.h> -#include <linux/tty_flip.h> -#include <linux/serial_core.h> -#include <linux/serial_reg.h> - -#include <linux/kthread.h> -#include <linux/spi/spi.h> -#include <linux/pm.h> - -#include "mrst_max3110.h" - -#define UART_TX_NEEDED 1 -#define CON_TX_NEEDED 2 -#define BIT_IRQ_PENDING 3 - -struct uart_max3110 { - struct uart_port port; - struct spi_device *spi; - char name[SPI_NAME_SIZE]; - - wait_queue_head_t wq; - struct task_struct *main_thread; - struct task_struct *read_thread; - struct mutex thread_mutex; - struct mutex io_mutex; - - u32 baud; - u16 cur_conf; - u8 clock; - u8 parity, word_7bits; - u16 irq; - - unsigned long uart_flags; - - /* console related */ - struct circ_buf con_xmit; -}; - -/* global data structure, may need be removed */ -static struct uart_max3110 *pmax; - -static int receive_chars(struct uart_max3110 *max, - unsigned short *str, int len); -static int max3110_read_multi(struct uart_max3110 *max); -static void max3110_con_receive(struct uart_max3110 *max); - -static int max3110_write_then_read(struct uart_max3110 *max, - const void *txbuf, void *rxbuf, unsigned len, int always_fast) -{ - struct spi_device *spi = max->spi; - struct spi_message message; - struct spi_transfer x; - int ret; - - mutex_lock(&max->io_mutex); - spi_message_init(&message); - memset(&x, 0, sizeof x); - x.len = len; - x.tx_buf = txbuf; - x.rx_buf = rxbuf; - spi_message_add_tail(&x, &message); - - if (always_fast) - x.speed_hz = spi->max_speed_hz; - else if (max->baud) - x.speed_hz = max->baud; - - /* Do the i/o */ - ret = spi_sync(spi, &message); - mutex_unlock(&max->io_mutex); - return ret; -} - -/* Write a 16b word to the device */ -static int max3110_out(struct uart_max3110 *max, const u16 out) -{ - void *buf; - u16 *obuf, *ibuf; - int ret; - - buf = kzalloc(8, GFP_KERNEL | GFP_DMA); - if (!buf) - return -ENOMEM; - - obuf = buf; - ibuf = buf + 4; - *obuf = out; - ret = max3110_write_then_read(max, obuf, ibuf, 2, 1); - if (ret) { - pr_warn("%s: get err msg %d when sending 0x%x\n", - __func__, ret, out); - goto exit; - } - - receive_chars(max, ibuf, 1); - -exit: - kfree(buf); - return ret; -} - -/* - * This is usually used to read data from SPIC RX FIFO, which doesn't - * need any delay like flushing character out. - * - * Return how many valide bytes are read back - */ -static int max3110_read_multi(struct uart_max3110 *max) -{ - void *buf; - u16 *obuf, *ibuf; - int ret, blen; - - blen = M3110_RX_FIFO_DEPTH * sizeof(u16); - buf = kzalloc(blen * 2, GFP_KERNEL | GFP_DMA); - if (!buf) - return 0; - - /* tx/rx always have the same length */ - obuf = buf; - ibuf = buf + blen; - - if (max3110_write_then_read(max, obuf, ibuf, blen, 1)) { - kfree(buf); - return 0; - } - - ret = receive_chars(max, ibuf, M3110_RX_FIFO_DEPTH); - - kfree(buf); - return ret; -} - -static void serial_m3110_con_putchar(struct uart_port *port, int ch) -{ - struct uart_max3110 *max = - container_of(port, struct uart_max3110, port); - struct circ_buf *xmit = &max->con_xmit; - - if (uart_circ_chars_free(xmit)) { - xmit->buf[xmit->head] = (char)ch; - xmit->head = (xmit->head + 1) & (PAGE_SIZE - 1); - } -} - -/* - * Print a string to the serial port trying not to disturb - * any possible real use of the port... - * - * The console_lock must be held when we get here. - */ -static void serial_m3110_con_write(struct console *co, - const char *s, unsigned int count) -{ - if (!pmax) - return; - - uart_console_write(&pmax->port, s, count, serial_m3110_con_putchar); - - if (!test_and_set_bit(CON_TX_NEEDED, &pmax->uart_flags)) - wake_up(&pmax->wq); -} - -static int __init -serial_m3110_con_setup(struct console *co, char *options) -{ - struct uart_max3110 *max = pmax; - int baud = 115200; - int bits = 8; - int parity = 'n'; - int flow = 'n'; - - pr_info("setting up console\n"); - - if (co->index == -1) - co->index = 0; - - if (!max) { - pr_err("pmax is NULL, return\n"); - return -ENODEV; - } - - if (options) - uart_parse_options(options, &baud, &parity, &bits, &flow); - - return uart_set_options(&max->port, co, baud, parity, bits, flow); -} - -static struct tty_driver *serial_m3110_con_device(struct console *co, - int *index) -{ - struct uart_driver *p = co->data; - *index = co->index; - return p->tty_driver; -} - -static struct uart_driver serial_m3110_reg; -static struct console serial_m3110_console = { - .name = "ttyS", - .write = serial_m3110_con_write, - .device = serial_m3110_con_device, - .setup = serial_m3110_con_setup, - .flags = CON_PRINTBUFFER, - .index = -1, - .data = &serial_m3110_reg, -}; - -static unsigned int serial_m3110_tx_empty(struct uart_port *port) -{ - return 1; -} - -static void serial_m3110_stop_tx(struct uart_port *port) -{ - return; -} - -/* stop_rx will be called in spin_lock env */ -static void serial_m3110_stop_rx(struct uart_port *port) -{ - return; -} - -#define WORDS_PER_XFER 128 -static void send_circ_buf(struct uart_max3110 *max, - struct circ_buf *xmit) -{ - void *buf; - u16 *obuf, *ibuf; - int i, len, blen, dma_size, left, ret = 0; - - - dma_size = WORDS_PER_XFER * sizeof(u16) * 2; - buf = kzalloc(dma_size, GFP_KERNEL | GFP_DMA); - if (!buf) - return; - obuf = buf; - ibuf = buf + dma_size/2; - - while (!uart_circ_empty(xmit)) { - left = uart_circ_chars_pending(xmit); - while (left) { - len = min(left, WORDS_PER_XFER); - blen = len * sizeof(u16); - memset(ibuf, 0, blen); - - for (i = 0; i < len; i++) { - obuf[i] = (u8)xmit->buf[xmit->tail] | WD_TAG; - xmit->tail = (xmit->tail + 1) & - (UART_XMIT_SIZE - 1); - } - - /* Fail to send msg to console is not very critical */ - - ret = max3110_write_then_read(max, obuf, ibuf, blen, 0); - if (ret) - pr_warn("%s: get err msg %d\n", __func__, ret); - - receive_chars(max, ibuf, len); - - max->port.icount.tx += len; - left -= len; - } - } - - kfree(buf); -} - -static void transmit_char(struct uart_max3110 *max) -{ - struct uart_port *port = &max->port; - struct circ_buf *xmit = &port->state->xmit; - - if (uart_circ_empty(xmit) || uart_tx_stopped(port)) - return; - - send_circ_buf(max, xmit); - - if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) - uart_write_wakeup(port); - - if (uart_circ_empty(xmit)) - serial_m3110_stop_tx(port); -} - -/* - * This will be called by uart_write() and tty_write, can't - * go to sleep - */ -static void serial_m3110_start_tx(struct uart_port *port) -{ - struct uart_max3110 *max = - container_of(port, struct uart_max3110, port); - - if (!test_and_set_bit(UART_TX_NEEDED, &max->uart_flags)) - wake_up(&max->wq); -} - -static int -receive_chars(struct uart_max3110 *max, unsigned short *str, int len) -{ - struct uart_port *port = &max->port; - struct tty_port *tport; - char buf[M3110_RX_FIFO_DEPTH]; - int r, w, usable; - - /* If uart is not opened, just return */ - if (!port->state) - return 0; - - tport = &port->state->port; - - for (r = 0, w = 0; r < len; r++) { - if (str[r] & MAX3110_BREAK && - uart_handle_break(port)) - continue; - - if (str[r] & MAX3110_READ_DATA_AVAILABLE) { - if (uart_handle_sysrq_char(port, str[r] & 0xff)) - continue; - - buf[w++] = str[r] & 0xff; - } - } - - if (!w) - return 0; - - for (r = 0; w; r += usable, w -= usable) { - usable = tty_buffer_request_room(tport, w); - if (usable) { - tty_insert_flip_string(tport, buf + r, usable); - port->icount.rx += usable; - } - } - tty_flip_buffer_push(tport); - - return r; -} - -/* - * This routine will be used in read_thread or RX IRQ handling, - * it will first do one round buffer read(8 words), if there is some - * valid RX data, will try to read 5 more rounds till all data - * is read out. - * - * Use stack space as data buffer to save some system load, and chose - * 504 Btyes as a threadhold to do a bulk push to upper tty layer when - * receiving bulk data, a much bigger buffer may cause stack overflow - */ -static void max3110_con_receive(struct uart_max3110 *max) -{ - int loop = 1, num; - - do { - num = max3110_read_multi(max); - - if (num) { - loop = 5; - } - } while (--loop); -} - -static int max3110_main_thread(void *_max) -{ - struct uart_max3110 *max = _max; - wait_queue_head_t *wq = &max->wq; - int ret = 0; - struct circ_buf *xmit = &max->con_xmit; - - pr_info("start main thread\n"); - - do { - wait_event_interruptible(*wq, - max->uart_flags || kthread_should_stop()); - - mutex_lock(&max->thread_mutex); - - if (test_and_clear_bit(BIT_IRQ_PENDING, &max->uart_flags)) - max3110_con_receive(max); - - /* first handle console output */ - if (test_and_clear_bit(CON_TX_NEEDED, &max->uart_flags)) - send_circ_buf(max, xmit); - - /* handle uart output */ - if (test_and_clear_bit(UART_TX_NEEDED, &max->uart_flags)) - transmit_char(max); - - mutex_unlock(&max->thread_mutex); - - } while (!kthread_should_stop()); - - return ret; -} - -static irqreturn_t serial_m3110_irq(int irq, void *dev_id) -{ - struct uart_max3110 *max = dev_id; - - /* max3110's irq is a falling edge, not level triggered, - * so no need to disable the irq */ - - if (!test_and_set_bit(BIT_IRQ_PENDING, &max->uart_flags)) - wake_up(&max->wq); - - return IRQ_HANDLED; -} - -/* if don't use RX IRQ, then need a thread to polling read */ -static int max3110_read_thread(void *_max) -{ - struct uart_max3110 *max = _max; - - pr_info("start read thread\n"); - do { - /* - * If can't acquire the mutex, it means the main thread - * is running which will also perform the rx job - */ - if (mutex_trylock(&max->thread_mutex)) { - max3110_con_receive(max); - mutex_unlock(&max->thread_mutex); - } - - set_current_state(TASK_INTERRUPTIBLE); - schedule_timeout(HZ / 20); - } while (!kthread_should_stop()); - - return 0; -} - -static int serial_m3110_startup(struct uart_port *port) -{ - struct uart_max3110 *max = - container_of(port, struct uart_max3110, port); - u16 config = 0; - int ret = 0; - - if (port->line != 0) { - pr_err("uart port startup failed\n"); - return -1; - } - - /* Disable all IRQ and config it to 115200, 8n1 */ - config = WC_TAG | WC_FIFO_ENABLE - | WC_1_STOPBITS - | WC_8BIT_WORD - | WC_BAUD_DR2; - - /* as we use thread to handle tx/rx, need set low latency */ - port->state->port.low_latency = 1; - - if (max->irq) { - /* Enable RX IRQ only */ - config |= WC_RXA_IRQ_ENABLE; - } else { - /* If IRQ is disabled, start a read thread for input data */ - max->read_thread = - kthread_run(max3110_read_thread, max, "max3110_read"); - if (IS_ERR(max->read_thread)) { - ret = PTR_ERR(max->read_thread); - max->read_thread = NULL; - pr_err("Can't create read thread!\n"); - return ret; - } - } - - ret = max3110_out(max, config); - if (ret) { - if (max->read_thread) - kthread_stop(max->read_thread); - max->read_thread = NULL; - return ret; - } - - max->cur_conf = config; - return 0; -} - -static void serial_m3110_shutdown(struct uart_port *port) -{ - struct uart_max3110 *max = - container_of(port, struct uart_max3110, port); - u16 config; - - if (max->read_thread) { - kthread_stop(max->read_thread); - max->read_thread = NULL; - } - - /* Disable interrupts from this port */ - config = WC_TAG | WC_SW_SHDI; - max3110_out(max, config); -} - -static void serial_m3110_release_port(struct uart_port *port) -{ -} - -static int serial_m3110_request_port(struct uart_port *port) -{ - return 0; -} - -static void serial_m3110_config_port(struct uart_port *port, int flags) -{ - port->type = PORT_MAX3100; -} - -static int -serial_m3110_verify_port(struct uart_port *port, struct serial_struct *ser) -{ - /* we don't want the core code to modify any port params */ - return -EINVAL; -} - - -static const char *serial_m3110_type(struct uart_port *port) -{ - struct uart_max3110 *max = - container_of(port, struct uart_max3110, port); - return max->name; -} - -static void -serial_m3110_set_termios(struct uart_port *port, struct ktermios *termios, - struct ktermios *old) -{ - struct uart_max3110 *max = - container_of(port, struct uart_max3110, port); - unsigned char cval; - unsigned int baud, parity = 0; - int clk_div = -1; - u16 new_conf = max->cur_conf; - - switch (termios->c_cflag & CSIZE) { - case CS7: - cval = UART_LCR_WLEN7; - new_conf |= WC_7BIT_WORD; - break; - default: - /* We only support CS7 & CS8 */ - termios->c_cflag &= ~CSIZE; - termios->c_cflag |= CS8; - case CS8: - cval = UART_LCR_WLEN8; - new_conf |= WC_8BIT_WORD; - break; - } - - baud = uart_get_baud_rate(port, termios, old, 0, 230400); - - /* First calc the div for 1.8MHZ clock case */ - switch (baud) { - case 300: - clk_div = WC_BAUD_DR384; - break; - case 600: - clk_div = WC_BAUD_DR192; - break; - case 1200: - clk_div = WC_BAUD_DR96; - break; - case 2400: - clk_div = WC_BAUD_DR48; - break; - case 4800: - clk_div = WC_BAUD_DR24; - break; - case 9600: - clk_div = WC_BAUD_DR12; - break; - case 19200: - clk_div = WC_BAUD_DR6; - break; - case 38400: - clk_div = WC_BAUD_DR3; - break; - case 57600: - clk_div = WC_BAUD_DR2; - break; - case 115200: - clk_div = WC_BAUD_DR1; - break; - case 230400: - if (max->clock & MAX3110_HIGH_CLK) - break; - default: - /* Pick the previous baud rate */ - baud = max->baud; - clk_div = max->cur_conf & WC_BAUD_DIV_MASK; - tty_termios_encode_baud_rate(termios, baud, baud); - } - - if (max->clock & MAX3110_HIGH_CLK) { - clk_div += 1; - /* High clk version max3110 doesn't support B300 */ - if (baud == 300) { - baud = 600; - clk_div = WC_BAUD_DR384; - } - if (baud == 230400) - clk_div = WC_BAUD_DR1; - tty_termios_encode_baud_rate(termios, baud, baud); - } - - new_conf = (new_conf & ~WC_BAUD_DIV_MASK) | clk_div; - - if (unlikely(termios->c_cflag & CMSPAR)) - termios->c_cflag &= ~CMSPAR; - - if (termios->c_cflag & CSTOPB) - new_conf |= WC_2_STOPBITS; - else - new_conf &= ~WC_2_STOPBITS; - - if (termios->c_cflag & PARENB) { - new_conf |= WC_PARITY_ENABLE; - parity |= UART_LCR_PARITY; - } else - new_conf &= ~WC_PARITY_ENABLE; - - if (!(termios->c_cflag & PARODD)) - parity |= UART_LCR_EPAR; - max->parity = parity; - - uart_update_timeout(port, termios->c_cflag, baud); - - new_conf |= WC_TAG; - if (new_conf != max->cur_conf) { - if (!max3110_out(max, new_conf)) { - max->cur_conf = new_conf; - max->baud = baud; - } - } -} - -/* Don't handle hw handshaking */ -static unsigned int serial_m3110_get_mctrl(struct uart_port *port) -{ - return TIOCM_DSR | TIOCM_CAR | TIOCM_DSR; -} - -static void serial_m3110_set_mctrl(struct uart_port *port, unsigned int mctrl) -{ -} - -static void serial_m3110_break_ctl(struct uart_port *port, int break_state) -{ -} - -static void serial_m3110_pm(struct uart_port *port, unsigned int state, - unsigned int oldstate) -{ -} - -static struct uart_ops serial_m3110_ops = { - .tx_empty = serial_m3110_tx_empty, - .set_mctrl = serial_m3110_set_mctrl, - .get_mctrl = serial_m3110_get_mctrl, - .stop_tx = serial_m3110_stop_tx, - .start_tx = serial_m3110_start_tx, - .stop_rx = serial_m3110_stop_rx, - .break_ctl = serial_m3110_break_ctl, - .startup = serial_m3110_startup, - .shutdown = serial_m3110_shutdown, - .set_termios = serial_m3110_set_termios, - .pm = serial_m3110_pm, - .type = serial_m3110_type, - .release_port = serial_m3110_release_port, - .request_port = serial_m3110_request_port, - .config_port = serial_m3110_config_port, - .verify_port = serial_m3110_verify_port, -}; - -static struct uart_driver serial_m3110_reg = { - .owner = THIS_MODULE, - .driver_name = "MRST serial", - .dev_name = "ttyS", - .major = TTY_MAJOR, - .minor = 64, - .nr = 1, - .cons = &serial_m3110_console, -}; - -#ifdef CONFIG_PM_SLEEP -static int serial_m3110_suspend(struct device *dev) -{ - struct spi_device *spi = to_spi_device(dev); - struct uart_max3110 *max = spi_get_drvdata(spi); - - if (max->irq > 0) - disable_irq(max->irq); - uart_suspend_port(&serial_m3110_reg, &max->port); - max3110_out(max, max->cur_conf | WC_SW_SHDI); - return 0; -} - -static int serial_m3110_resume(struct device *dev) -{ - struct spi_device *spi = to_spi_device(dev); - struct uart_max3110 *max = spi_get_drvdata(spi); - - max3110_out(max, max->cur_conf); - uart_resume_port(&serial_m3110_reg, &max->port); - if (max->irq > 0) - enable_irq(max->irq); - return 0; -} - -static SIMPLE_DEV_PM_OPS(serial_m3110_pm_ops, serial_m3110_suspend, - serial_m3110_resume); -#define SERIAL_M3110_PM_OPS (&serial_m3110_pm_ops) - -#else -#define SERIAL_M3110_PM_OPS NULL -#endif - -static int serial_m3110_probe(struct spi_device *spi) -{ - struct uart_max3110 *max; - void *buffer; - u16 res; - int ret = 0; - - max = kzalloc(sizeof(*max), GFP_KERNEL); - if (!max) - return -ENOMEM; - - /* Set spi info */ - spi->bits_per_word = 16; - max->clock = MAX3110_HIGH_CLK; - - spi_setup(spi); - - max->port.type = PORT_MAX3100; - max->port.fifosize = 2; /* Only have 16b buffer */ - max->port.ops = &serial_m3110_ops; - max->port.line = 0; - max->port.dev = &spi->dev; - max->port.uartclk = 115200; - - max->spi = spi; - strcpy(max->name, spi->modalias); - max->irq = (u16)spi->irq; - - mutex_init(&max->thread_mutex); - mutex_init(&max->io_mutex); - - max->word_7bits = 0; - max->parity = 0; - max->baud = 0; - - max->cur_conf = 0; - max->uart_flags = 0; - - /* Check if reading configuration register returns something sane */ - - res = RC_TAG; - ret = max3110_write_then_read(max, (u8 *)&res, (u8 *)&res, 2, 0); - if (ret < 0 || res == 0 || res == 0xffff) { - dev_dbg(&spi->dev, "MAX3111 deemed not present (conf reg %04x)", - res); - ret = -ENODEV; - goto err_get_page; - } - - buffer = (void *)__get_free_page(GFP_KERNEL); - if (!buffer) { - ret = -ENOMEM; - goto err_get_page; - } - max->con_xmit.buf = buffer; - max->con_xmit.head = 0; - max->con_xmit.tail = 0; - - init_waitqueue_head(&max->wq); - - max->main_thread = kthread_run(max3110_main_thread, - max, "max3110_main"); - if (IS_ERR(max->main_thread)) { - ret = PTR_ERR(max->main_thread); - goto err_kthread; - } - - if (max->irq) { - ret = request_irq(max->irq, serial_m3110_irq, - IRQ_TYPE_EDGE_FALLING, "max3110", max); - if (ret) { - max->irq = 0; - dev_warn(&spi->dev, - "unable to allocate IRQ, will use polling method\n"); - } - } - - spi_set_drvdata(spi, max); - pmax = max; - - /* Give membase a psudo value to pass serial_core's check */ - max->port.membase = (unsigned char __iomem *)0xff110000; - uart_add_one_port(&serial_m3110_reg, &max->port); - - return 0; - -err_kthread: - free_page((unsigned long)buffer); -err_get_page: - kfree(max); - return ret; -} - -static int serial_m3110_remove(struct spi_device *dev) -{ - struct uart_max3110 *max = spi_get_drvdata(dev); - - if (!max) - return 0; - - uart_remove_one_port(&serial_m3110_reg, &max->port); - - free_page((unsigned long)max->con_xmit.buf); - - if (max->irq) - free_irq(max->irq, max); - - if (max->main_thread) - kthread_stop(max->main_thread); - - kfree(max); - return 0; -} - -static struct spi_driver uart_max3110_driver = { - .driver = { - .name = "spi_max3111", - .owner = THIS_MODULE, - .pm = SERIAL_M3110_PM_OPS, - }, - .probe = serial_m3110_probe, - .remove = serial_m3110_remove, -}; - -static int __init serial_m3110_init(void) -{ - int ret = 0; - - ret = uart_register_driver(&serial_m3110_reg); - if (ret) - return ret; - - ret = spi_register_driver(&uart_max3110_driver); - if (ret) - uart_unregister_driver(&serial_m3110_reg); - - return ret; -} - -static void __exit serial_m3110_exit(void) -{ - spi_unregister_driver(&uart_max3110_driver); - uart_unregister_driver(&serial_m3110_reg); -} - -module_init(serial_m3110_init); -module_exit(serial_m3110_exit); - -MODULE_LICENSE("GPL v2"); -MODULE_ALIAS("spi:max3110-uart"); diff --git a/drivers/tty/serial/mrst_max3110.h b/drivers/tty/serial/mrst_max3110.h deleted file mode 100644 index 35af0739513b..000000000000 --- a/drivers/tty/serial/mrst_max3110.h +++ /dev/null @@ -1,61 +0,0 @@ -#ifndef _MRST_MAX3110_H -#define _MRST_MAX3110_H - -#define MAX3110_HIGH_CLK 0x1 /* 3.6864 MHZ */ -#define MAX3110_LOW_CLK 0x0 /* 1.8432 MHZ */ - -/* status bits for all 4 MAX3110 operate modes */ -#define MAX3110_READ_DATA_AVAILABLE (1 << 15) -#define MAX3110_WRITE_BUF_EMPTY (1 << 14) -#define MAX3110_BREAK (1 << 10) - -#define WC_TAG (3 << 14) -#define RC_TAG (1 << 14) -#define WD_TAG (2 << 14) -#define RD_TAG (0 << 14) - -/* bits def for write configuration */ -#define WC_FIFO_ENABLE_MASK (1 << 13) -#define WC_FIFO_ENABLE (0 << 13) - -#define WC_SW_SHDI (1 << 12) - -#define WC_IRQ_MASK (0xF << 8) -#define WC_TXE_IRQ_ENABLE (1 << 11) /* TX empty irq */ -#define WC_RXA_IRQ_ENABLE (1 << 10) /* RX available irq */ -#define WC_PAR_HIGH_IRQ_ENABLE (1 << 9) -#define WC_REC_ACT_IRQ_ENABLE (1 << 8) - -#define WC_IRDA_ENABLE (1 << 7) - -#define WC_STOPBITS_MASK (1 << 6) -#define WC_2_STOPBITS (1 << 6) -#define WC_1_STOPBITS (0 << 6) - -#define WC_PARITY_ENABLE_MASK (1 << 5) -#define WC_PARITY_ENABLE (1 << 5) - -#define WC_WORDLEN_MASK (1 << 4) -#define WC_7BIT_WORD (1 << 4) -#define WC_8BIT_WORD (0 << 4) - -#define WC_BAUD_DIV_MASK (0xF) -#define WC_BAUD_DR1 (0x0) -#define WC_BAUD_DR2 (0x1) -#define WC_BAUD_DR4 (0x2) -#define WC_BAUD_DR8 (0x3) -#define WC_BAUD_DR16 (0x4) -#define WC_BAUD_DR32 (0x5) -#define WC_BAUD_DR64 (0x6) -#define WC_BAUD_DR128 (0x7) -#define WC_BAUD_DR3 (0x8) -#define WC_BAUD_DR6 (0x9) -#define WC_BAUD_DR12 (0xA) -#define WC_BAUD_DR24 (0xB) -#define WC_BAUD_DR48 (0xC) -#define WC_BAUD_DR96 (0xD) -#define WC_BAUD_DR192 (0xE) -#define WC_BAUD_DR384 (0xF) - -#define M3110_RX_FIFO_DEPTH 8 -#endif diff --git a/drivers/tty/serial/msm_serial.c b/drivers/tty/serial/msm_serial.c index c88b522ccd73..b73889c8ed4b 100644 --- a/drivers/tty/serial/msm_serial.c +++ b/drivers/tty/serial/msm_serial.c @@ -920,14 +920,15 @@ static void msm_console_write(struct console *co, const char *s, static int __init msm_console_setup(struct console *co, char *options) { struct uart_port *port; - struct msm_port *msm_port; - int baud = 0, flow, bits, parity; + int baud = 115200; + int bits = 8; + int parity = 'n'; + int flow = 'n'; if (unlikely(co->index >= UART_NR || co->index < 0)) return -ENXIO; port = get_port_from_line(co->index); - msm_port = UART_TO_MSM(port); if (unlikely(!port->membase)) return -ENXIO; @@ -937,23 +938,6 @@ static int __init msm_console_setup(struct console *co, char *options) if (options) uart_parse_options(options, &baud, &parity, &bits, &flow); - bits = 8; - parity = 'n'; - flow = 'n'; - msm_write(port, UART_MR2_BITS_PER_CHAR_8 | UART_MR2_STOP_BIT_LEN_ONE, - UART_MR2); /* 8N1 */ - - if (baud < 300 || baud > 115200) - baud = 115200; - msm_set_baud_rate(port, baud); - - msm_reset(port); - - if (msm_port->is_uartdm) { - msm_write(port, UART_CR_CMD_PROTECTION_EN, UART_CR); - msm_write(port, UART_CR_TX_ENABLE, UART_CR); - } - pr_info("msm_serial: console setup on port #%d\n", port->line); return uart_set_options(port, co, baud, parity, bits, flow); @@ -1142,9 +1126,6 @@ static int __init msm_serial_init(void) static void __exit msm_serial_exit(void) { -#ifdef CONFIG_SERIAL_MSM_CONSOLE - unregister_console(&msm_console); -#endif platform_driver_unregister(&msm_platform_driver); uart_unregister_driver(&msm_uart_driver); } diff --git a/drivers/tty/serial/mxs-auart.c b/drivers/tty/serial/mxs-auart.c index ec553f8eb218..d1298b6cc68e 100644 --- a/drivers/tty/serial/mxs-auart.c +++ b/drivers/tty/serial/mxs-auart.c @@ -152,8 +152,6 @@ struct mxs_auart_port { unsigned int mctrl_prev; enum mxs_auart_type devtype; - unsigned int irq; - struct clk *clk; struct device *dev; @@ -1228,37 +1226,32 @@ static int mxs_auart_probe(struct platform_device *pdev) of_match_device(mxs_auart_dt_ids, &pdev->dev); struct mxs_auart_port *s; u32 version; - int ret = 0; + int ret, irq; struct resource *r; - s = kzalloc(sizeof(struct mxs_auart_port), GFP_KERNEL); - if (!s) { - ret = -ENOMEM; - goto out; - } + s = devm_kzalloc(&pdev->dev, sizeof(*s), GFP_KERNEL); + if (!s) + return -ENOMEM; ret = serial_mxs_probe_dt(s, pdev); if (ret > 0) s->port.line = pdev->id < 0 ? 0 : pdev->id; else if (ret < 0) - goto out_free; + return ret; if (of_id) { pdev->id_entry = of_id->data; s->devtype = pdev->id_entry->driver_data; } - s->clk = clk_get(&pdev->dev, NULL); - if (IS_ERR(s->clk)) { - ret = PTR_ERR(s->clk); - goto out_free; - } + s->clk = devm_clk_get(&pdev->dev, NULL); + if (IS_ERR(s->clk)) + return PTR_ERR(s->clk); r = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!r) { - ret = -ENXIO; - goto out_free_clk; - } + if (!r) + return -ENXIO; + s->port.mapbase = r->start; s->port.membase = ioremap(r->start, resource_size(r)); @@ -1271,11 +1264,15 @@ static int mxs_auart_probe(struct platform_device *pdev) s->mctrl_prev = 0; - s->irq = platform_get_irq(pdev, 0); - s->port.irq = s->irq; - ret = request_irq(s->irq, mxs_auart_irq_handle, 0, dev_name(&pdev->dev), s); + irq = platform_get_irq(pdev, 0); + if (irq < 0) + return irq; + + s->port.irq = irq; + ret = devm_request_irq(&pdev->dev, irq, mxs_auart_irq_handle, 0, + dev_name(&pdev->dev), s); if (ret) - goto out_free_clk; + return ret; platform_set_drvdata(pdev, s); @@ -1288,7 +1285,7 @@ static int mxs_auart_probe(struct platform_device *pdev) */ ret = mxs_auart_request_gpio_irq(s); if (ret) - goto out_free_irq; + return ret; auart_port[s->port.line] = s; @@ -1307,14 +1304,7 @@ static int mxs_auart_probe(struct platform_device *pdev) out_free_gpio_irq: mxs_auart_free_gpio_irq(s); -out_free_irq: auart_port[pdev->id] = NULL; - free_irq(s->irq, s); -out_free_clk: - clk_put(s->clk); -out_free: - kfree(s); -out: return ret; } @@ -1323,13 +1313,8 @@ static int mxs_auart_remove(struct platform_device *pdev) struct mxs_auart_port *s = platform_get_drvdata(pdev); uart_remove_one_port(&auart_driver, &s->port); - auart_port[pdev->id] = NULL; - mxs_auart_free_gpio_irq(s); - clk_put(s->clk); - free_irq(s->irq, s); - kfree(s); return 0; } diff --git a/drivers/tty/serial/of_serial.c b/drivers/tty/serial/of_serial.c index 64f1bab7e9d7..7ff61e24a195 100644 --- a/drivers/tty/serial/of_serial.c +++ b/drivers/tty/serial/of_serial.c @@ -102,6 +102,11 @@ static int of_platform_serial_setup(struct platform_device *ofdev, if (of_property_read_u32(np, "fifo-size", &prop) == 0) port->fifosize = prop; + /* Check for a fixed line number */ + ret = of_alias_get_id(np, "serial"); + if (ret >= 0) + port->line = ret; + port->irq = irq_of_parse_and_map(np, 0); port->iotype = UPIO_MEM; if (of_property_read_u32(np, "reg-io-width", &prop) == 0) { @@ -128,6 +133,10 @@ static int of_platform_serial_setup(struct platform_device *ofdev, if (of_find_property(np, "no-loopback-test", NULL)) port->flags |= UPF_SKIP_TEST; + ret = of_alias_get_id(np, "serial"); + if (ret >= 0) + port->line = ret; + port->dev = &ofdev->dev; switch (type) { @@ -331,6 +340,10 @@ static struct of_device_id of_platform_serial_table[] = { .data = (void *)PORT_ALTR_16550_F64, }, { .compatible = "altr,16550-FIFO128", .data = (void *)PORT_ALTR_16550_F128, }, + { .compatible = "mrvl,mmp-uart", + .data = (void *)PORT_XSCALE, }, + { .compatible = "mrvl,pxa-uart", + .data = (void *)PORT_XSCALE, }, #ifdef CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL { .compatible = "ibm,qpace-nwp-serial", .data = (void *)PORT_NWPSERIAL, }, diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c index 2e1073da6719..10256fa04b40 100644 --- a/drivers/tty/serial/omap-serial.c +++ b/drivers/tty/serial/omap-serial.c @@ -63,7 +63,7 @@ #define UART_ERRATA_i202_MDR1_ACCESS BIT(0) #define UART_ERRATA_i291_DMA_FORCEIDLE BIT(1) -#define DEFAULT_CLK_SPEED 48000000 /* 48Mhz*/ +#define DEFAULT_CLK_SPEED 48000000 /* 48Mhz */ /* SCR register bitmasks */ #define OMAP_UART_SCR_RX_TRIG_GRANU1_MASK (1 << 7) @@ -93,7 +93,7 @@ /* WER = 0x7F * Enable module level wakeup in WER reg */ -#define OMAP_UART_WER_MOD_WKUP 0X7F +#define OMAP_UART_WER_MOD_WKUP 0x7F /* Enable XON/XOFF flow control on output */ #define OMAP_UART_SW_TX 0x08 @@ -114,7 +114,7 @@ struct uart_omap_dma { dma_addr_t tx_buf_dma_phys; unsigned int uart_base; /* - * Buffer for rx dma.It is not required for tx because the buffer + * Buffer for rx dma. It is not required for tx because the buffer * comes from port structure. */ unsigned char *rx_buf; @@ -151,7 +151,7 @@ struct uart_omap_port { int use_dma; /* * Some bits in registers are cleared on a read, so they must - * be saved whenever the register is read but the bits will not + * be saved whenever the register is read, but the bits will not * be immediately processed. */ unsigned int lsr_break_flag; @@ -681,7 +681,7 @@ static unsigned int serial_omap_get_mctrl(struct uart_port *port) static void serial_omap_set_mctrl(struct uart_port *port, unsigned int mctrl) { struct uart_omap_port *up = to_uart_omap_port(port); - unsigned char mcr = 0, old_mcr; + unsigned char mcr = 0, old_mcr, lcr; dev_dbg(up->port.dev, "serial_omap_set_mctrl+%d\n", up->port.line); if (mctrl & TIOCM_RTS) @@ -701,6 +701,17 @@ static void serial_omap_set_mctrl(struct uart_port *port, unsigned int mctrl) UART_MCR_DTR | UART_MCR_RTS); up->mcr = old_mcr | mcr; serial_out(up, UART_MCR, up->mcr); + + /* Turn off autoRTS if RTS is lowered; restore autoRTS if RTS raised */ + lcr = serial_in(up, UART_LCR); + serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); + if ((mctrl & TIOCM_RTS) && (port->status & UPSTAT_AUTORTS)) + up->efr |= UART_EFR_RTS; + else + up->efr &= UART_EFR_RTS; + serial_out(up, UART_EFR, up->efr); + serial_out(up, UART_LCR, lcr); + pm_runtime_mark_last_busy(up->dev); pm_runtime_put_autosuspend(up->dev); } @@ -756,8 +767,6 @@ static int serial_omap_startup(struct uart_port *port) * (they will be reenabled in set_termios()) */ serial_omap_clear_fifos(up); - /* For Hardware flow control */ - serial_out(up, UART_MCR, UART_MCR_RTS); /* * Clear the interrupt registers. @@ -1053,12 +1062,12 @@ serial_omap_set_termios(struct uart_port *port, struct ktermios *termios, serial_out(up, UART_TI752_TCR, OMAP_UART_TCR_TRIG); - if (termios->c_cflag & CRTSCTS && up->port.flags & UPF_HARD_FLOW) { - /* Enable AUTORTS and AUTOCTS */ - up->efr |= UART_EFR_CTS | UART_EFR_RTS; + up->port.status &= ~(UPSTAT_AUTOCTS | UPSTAT_AUTORTS | UPSTAT_AUTOXOFF); - /* Ensure MCR RTS is asserted */ - up->mcr |= UART_MCR_RTS; + if (termios->c_cflag & CRTSCTS && up->port.flags & UPF_HARD_FLOW) { + /* Enable AUTOCTS (autoRTS is enabled when RTS is raised) */ + up->port.status |= UPSTAT_AUTOCTS | UPSTAT_AUTORTS; + up->efr |= UART_EFR_CTS; } else { /* Disable AUTORTS and AUTOCTS */ up->efr &= ~(UART_EFR_CTS | UART_EFR_RTS); @@ -1081,8 +1090,10 @@ serial_omap_set_termios(struct uart_port *port, struct ktermios *termios, * Enable XON/XOFF flow control on output. * Transmit XON1, XOFF1 */ - if (termios->c_iflag & IXOFF) + if (termios->c_iflag & IXOFF) { + up->port.status |= UPSTAT_AUTOXOFF; up->efr |= OMAP_UART_SW_TX; + } /* * IXANY Flag: diff --git a/drivers/tty/serial/samsung.c b/drivers/tty/serial/samsung.c index 107e80722575..af821a908720 100644 --- a/drivers/tty/serial/samsung.c +++ b/drivers/tty/serial/samsung.c @@ -28,6 +28,9 @@ #define SUPPORT_SYSRQ #endif +#include <linux/dmaengine.h> +#include <linux/dma-mapping.h> +#include <linux/slab.h> #include <linux/module.h> #include <linux/ioport.h> #include <linux/io.h> @@ -78,6 +81,10 @@ static void dbg(const char *fmt, ...) #define S3C24XX_SERIAL_MAJOR 204 #define S3C24XX_SERIAL_MINOR 64 +#define S3C24XX_TX_PIO 1 +#define S3C24XX_TX_DMA 2 +#define S3C24XX_RX_PIO 1 +#define S3C24XX_RX_DMA 2 /* macros to change one thing to another */ #define tx_enabled(port) ((port)->unused[0]) @@ -154,39 +161,272 @@ static void s3c24xx_serial_rx_disable(struct uart_port *port) static void s3c24xx_serial_stop_tx(struct uart_port *port) { struct s3c24xx_uart_port *ourport = to_ourport(port); + struct s3c24xx_uart_dma *dma = ourport->dma; + struct circ_buf *xmit = &port->state->xmit; + struct dma_tx_state state; + int count; - if (tx_enabled(port)) { - if (s3c24xx_serial_has_interrupt_mask(port)) - __set_bit(S3C64XX_UINTM_TXD, - portaddrl(port, S3C64XX_UINTM)); - else - disable_irq_nosync(ourport->tx_irq); - tx_enabled(port) = 0; - if (port->flags & UPF_CONS_FLOW) - s3c24xx_serial_rx_enable(port); + if (!tx_enabled(port)) + return; + + if (s3c24xx_serial_has_interrupt_mask(port)) + __set_bit(S3C64XX_UINTM_TXD, + portaddrl(port, S3C64XX_UINTM)); + else + disable_irq_nosync(ourport->tx_irq); + + if (dma && dma->tx_chan && ourport->tx_in_progress == S3C24XX_TX_DMA) { + dmaengine_pause(dma->tx_chan); + dmaengine_tx_status(dma->tx_chan, dma->tx_cookie, &state); + dmaengine_terminate_all(dma->tx_chan); + dma_sync_single_for_cpu(ourport->port.dev, + dma->tx_transfer_addr, dma->tx_size, DMA_TO_DEVICE); + async_tx_ack(dma->tx_desc); + count = dma->tx_bytes_requested - state.residue; + xmit->tail = (xmit->tail + count) & (UART_XMIT_SIZE - 1); + port->icount.tx += count; } + + tx_enabled(port) = 0; + ourport->tx_in_progress = 0; + + if (port->flags & UPF_CONS_FLOW) + s3c24xx_serial_rx_enable(port); + + ourport->tx_mode = 0; } -static void s3c24xx_serial_start_tx(struct uart_port *port) +static void s3c24xx_serial_start_next_tx(struct s3c24xx_uart_port *ourport); + +static void s3c24xx_serial_tx_dma_complete(void *args) +{ + struct s3c24xx_uart_port *ourport = args; + struct uart_port *port = &ourport->port; + struct circ_buf *xmit = &port->state->xmit; + struct s3c24xx_uart_dma *dma = ourport->dma; + struct dma_tx_state state; + unsigned long flags; + int count; + + + dmaengine_tx_status(dma->tx_chan, dma->tx_cookie, &state); + count = dma->tx_bytes_requested - state.residue; + async_tx_ack(dma->tx_desc); + + dma_sync_single_for_cpu(ourport->port.dev, dma->tx_transfer_addr, + dma->tx_size, DMA_TO_DEVICE); + + spin_lock_irqsave(&port->lock, flags); + + xmit->tail = (xmit->tail + count) & (UART_XMIT_SIZE - 1); + port->icount.tx += count; + ourport->tx_in_progress = 0; + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(port); + + s3c24xx_serial_start_next_tx(ourport); + spin_unlock_irqrestore(&port->lock, flags); +} + +static void enable_tx_dma(struct s3c24xx_uart_port *ourport) +{ + struct uart_port *port = &ourport->port; + u32 ucon; + + /* Mask Tx interrupt */ + if (s3c24xx_serial_has_interrupt_mask(port)) + __set_bit(S3C64XX_UINTM_TXD, + portaddrl(port, S3C64XX_UINTM)); + else + disable_irq_nosync(ourport->tx_irq); + + /* Enable tx dma mode */ + ucon = rd_regl(port, S3C2410_UCON); + ucon &= ~(S3C64XX_UCON_TXBURST_MASK | S3C64XX_UCON_TXMODE_MASK); + ucon |= (dma_get_cache_alignment() >= 16) ? + S3C64XX_UCON_TXBURST_16 : S3C64XX_UCON_TXBURST_1; + ucon |= S3C64XX_UCON_TXMODE_DMA; + wr_regl(port, S3C2410_UCON, ucon); + + ourport->tx_mode = S3C24XX_TX_DMA; +} + +static void enable_tx_pio(struct s3c24xx_uart_port *ourport) +{ + struct uart_port *port = &ourport->port; + u32 ucon, ufcon; + + /* Set ufcon txtrig */ + ourport->tx_in_progress = S3C24XX_TX_PIO; + ufcon = rd_regl(port, S3C2410_UFCON); + wr_regl(port, S3C2410_UFCON, ufcon); + + /* Enable tx pio mode */ + ucon = rd_regl(port, S3C2410_UCON); + ucon &= ~(S3C64XX_UCON_TXMODE_MASK); + ucon |= S3C64XX_UCON_TXMODE_CPU; + wr_regl(port, S3C2410_UCON, ucon); + + /* Unmask Tx interrupt */ + if (s3c24xx_serial_has_interrupt_mask(port)) + __clear_bit(S3C64XX_UINTM_TXD, + portaddrl(port, S3C64XX_UINTM)); + else + enable_irq(ourport->tx_irq); + + ourport->tx_mode = S3C24XX_TX_PIO; +} + +static void s3c24xx_serial_start_tx_pio(struct s3c24xx_uart_port *ourport) +{ + if (ourport->tx_mode != S3C24XX_TX_PIO) + enable_tx_pio(ourport); +} + +static int s3c24xx_serial_start_tx_dma(struct s3c24xx_uart_port *ourport, + unsigned int count) +{ + struct uart_port *port = &ourport->port; + struct circ_buf *xmit = &port->state->xmit; + struct s3c24xx_uart_dma *dma = ourport->dma; + + + if (ourport->tx_mode != S3C24XX_TX_DMA) + enable_tx_dma(ourport); + + while (xmit->tail & (dma_get_cache_alignment() - 1)) { + if (rd_regl(port, S3C2410_UFSTAT) & ourport->info->tx_fifofull) + return 0; + wr_regb(port, S3C2410_UTXH, xmit->buf[xmit->tail]); + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + port->icount.tx++; + count--; + } + + dma->tx_size = count & ~(dma_get_cache_alignment() - 1); + dma->tx_transfer_addr = dma->tx_addr + xmit->tail; + + dma_sync_single_for_device(ourport->port.dev, dma->tx_transfer_addr, + dma->tx_size, DMA_TO_DEVICE); + + dma->tx_desc = dmaengine_prep_slave_single(dma->tx_chan, + dma->tx_transfer_addr, dma->tx_size, + DMA_MEM_TO_DEV, DMA_PREP_INTERRUPT); + if (!dma->tx_desc) { + dev_err(ourport->port.dev, "Unable to get desc for Tx\n"); + return -EIO; + } + + dma->tx_desc->callback = s3c24xx_serial_tx_dma_complete; + dma->tx_desc->callback_param = ourport; + dma->tx_bytes_requested = dma->tx_size; + + ourport->tx_in_progress = S3C24XX_TX_DMA; + dma->tx_cookie = dmaengine_submit(dma->tx_desc); + dma_async_issue_pending(dma->tx_chan); + return 0; +} + +static void s3c24xx_serial_start_next_tx(struct s3c24xx_uart_port *ourport) +{ + struct uart_port *port = &ourport->port; + struct circ_buf *xmit = &port->state->xmit; + unsigned long count; + + /* Get data size up to the end of buffer */ + count = CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE); + + if (!count) { + s3c24xx_serial_stop_tx(port); + return; + } + + if (!ourport->dma || !ourport->dma->tx_chan || count < port->fifosize) + s3c24xx_serial_start_tx_pio(ourport); + else + s3c24xx_serial_start_tx_dma(ourport, count); +} + +void s3c24xx_serial_start_tx(struct uart_port *port) { struct s3c24xx_uart_port *ourport = to_ourport(port); + struct circ_buf *xmit = &port->state->xmit; if (!tx_enabled(port)) { if (port->flags & UPF_CONS_FLOW) s3c24xx_serial_rx_disable(port); - if (s3c24xx_serial_has_interrupt_mask(port)) - __clear_bit(S3C64XX_UINTM_TXD, - portaddrl(port, S3C64XX_UINTM)); - else - enable_irq(ourport->tx_irq); tx_enabled(port) = 1; + if (!ourport->dma || !ourport->dma->tx_chan) + s3c24xx_serial_start_tx_pio(ourport); + } + + if (ourport->dma && ourport->dma->tx_chan) { + if (!uart_circ_empty(xmit) && !ourport->tx_in_progress) + s3c24xx_serial_start_next_tx(ourport); + } +} + +static void s3c24xx_uart_copy_rx_to_tty(struct s3c24xx_uart_port *ourport, + struct tty_port *tty, int count) +{ + struct s3c24xx_uart_dma *dma = ourport->dma; + int copied; + + if (!count) + return; + + dma_sync_single_for_cpu(ourport->port.dev, dma->rx_addr, + dma->rx_size, DMA_FROM_DEVICE); + + ourport->port.icount.rx += count; + if (!tty) { + dev_err(ourport->port.dev, "No tty port\n"); + return; + } + copied = tty_insert_flip_string(tty, + ((unsigned char *)(ourport->dma->rx_buf)), count); + if (copied != count) { + WARN_ON(1); + dev_err(ourport->port.dev, "RxData copy to tty layer failed\n"); + } +} + +static int s3c24xx_serial_rx_fifocnt(struct s3c24xx_uart_port *ourport, + unsigned long ufstat); + +static void uart_rx_drain_fifo(struct s3c24xx_uart_port *ourport) +{ + struct uart_port *port = &ourport->port; + struct tty_port *tty = &port->state->port; + unsigned int ch, ufstat; + unsigned int count; + + ufstat = rd_regl(port, S3C2410_UFSTAT); + count = s3c24xx_serial_rx_fifocnt(ourport, ufstat); + + if (!count) + return; + + while (count-- > 0) { + ch = rd_regb(port, S3C2410_URXH); + + ourport->port.icount.rx++; + tty_insert_flip_char(tty, ch, TTY_NORMAL); } + + tty_flip_buffer_push(tty); } static void s3c24xx_serial_stop_rx(struct uart_port *port) { struct s3c24xx_uart_port *ourport = to_ourport(port); + struct s3c24xx_uart_dma *dma = ourport->dma; + struct tty_port *t = &port->state->port; + struct dma_tx_state state; + enum dma_status dma_status; + unsigned int received; if (rx_enabled(port)) { dbg("s3c24xx_serial_stop_rx: port=%p\n", port); @@ -197,6 +437,17 @@ static void s3c24xx_serial_stop_rx(struct uart_port *port) disable_irq_nosync(ourport->rx_irq); rx_enabled(port) = 0; } + if (dma && dma->rx_chan) { + dmaengine_pause(dma->tx_chan); + dma_status = dmaengine_tx_status(dma->rx_chan, + dma->rx_cookie, &state); + if (dma_status == DMA_IN_PROGRESS || + dma_status == DMA_PAUSED) { + received = dma->rx_bytes_requested - state.residue; + dmaengine_terminate_all(dma->rx_chan); + s3c24xx_uart_copy_rx_to_tty(ourport, t, received); + } + } } static inline struct s3c24xx_uart_info @@ -228,12 +479,157 @@ static int s3c24xx_serial_rx_fifocnt(struct s3c24xx_uart_port *ourport, return (ufstat & info->rx_fifomask) >> info->rx_fifoshift; } +static void s3c64xx_start_rx_dma(struct s3c24xx_uart_port *ourport); +static void s3c24xx_serial_rx_dma_complete(void *args) +{ + struct s3c24xx_uart_port *ourport = args; + struct uart_port *port = &ourport->port; + + struct s3c24xx_uart_dma *dma = ourport->dma; + struct tty_port *t = &port->state->port; + struct tty_struct *tty = tty_port_tty_get(&ourport->port.state->port); + + struct dma_tx_state state; + unsigned long flags; + int received; + + dmaengine_tx_status(dma->rx_chan, dma->rx_cookie, &state); + received = dma->rx_bytes_requested - state.residue; + async_tx_ack(dma->rx_desc); + + spin_lock_irqsave(&port->lock, flags); + + if (received) + s3c24xx_uart_copy_rx_to_tty(ourport, t, received); + + if (tty) { + tty_flip_buffer_push(t); + tty_kref_put(tty); + } + + s3c64xx_start_rx_dma(ourport); + + spin_unlock_irqrestore(&port->lock, flags); +} + +static void s3c64xx_start_rx_dma(struct s3c24xx_uart_port *ourport) +{ + struct s3c24xx_uart_dma *dma = ourport->dma; + + dma_sync_single_for_device(ourport->port.dev, dma->rx_addr, + dma->rx_size, DMA_FROM_DEVICE); + + dma->rx_desc = dmaengine_prep_slave_single(dma->rx_chan, + dma->rx_addr, dma->rx_size, DMA_DEV_TO_MEM, + DMA_PREP_INTERRUPT); + if (!dma->rx_desc) { + dev_err(ourport->port.dev, "Unable to get desc for Rx\n"); + return; + } + + dma->rx_desc->callback = s3c24xx_serial_rx_dma_complete; + dma->rx_desc->callback_param = ourport; + dma->rx_bytes_requested = dma->rx_size; + + dma->rx_cookie = dmaengine_submit(dma->rx_desc); + dma_async_issue_pending(dma->rx_chan); +} /* ? - where has parity gone?? */ #define S3C2410_UERSTAT_PARITY (0x1000) -static irqreturn_t -s3c24xx_serial_rx_chars(int irq, void *dev_id) +static void enable_rx_dma(struct s3c24xx_uart_port *ourport) +{ + struct uart_port *port = &ourport->port; + unsigned int ucon; + + /* set Rx mode to DMA mode */ + ucon = rd_regl(port, S3C2410_UCON); + ucon &= ~(S3C64XX_UCON_RXBURST_MASK | + S3C64XX_UCON_TIMEOUT_MASK | + S3C64XX_UCON_EMPTYINT_EN | + S3C64XX_UCON_DMASUS_EN | + S3C64XX_UCON_TIMEOUT_EN | + S3C64XX_UCON_RXMODE_MASK); + ucon |= S3C64XX_UCON_RXBURST_16 | + 0xf << S3C64XX_UCON_TIMEOUT_SHIFT | + S3C64XX_UCON_EMPTYINT_EN | + S3C64XX_UCON_TIMEOUT_EN | + S3C64XX_UCON_RXMODE_DMA; + wr_regl(port, S3C2410_UCON, ucon); + + ourport->rx_mode = S3C24XX_RX_DMA; +} + +static void enable_rx_pio(struct s3c24xx_uart_port *ourport) +{ + struct uart_port *port = &ourport->port; + unsigned int ucon; + + /* set Rx mode to DMA mode */ + ucon = rd_regl(port, S3C2410_UCON); + ucon &= ~(S3C64XX_UCON_TIMEOUT_MASK | + S3C64XX_UCON_EMPTYINT_EN | + S3C64XX_UCON_DMASUS_EN | + S3C64XX_UCON_TIMEOUT_EN | + S3C64XX_UCON_RXMODE_MASK); + ucon |= 0xf << S3C64XX_UCON_TIMEOUT_SHIFT | + S3C64XX_UCON_TIMEOUT_EN | + S3C64XX_UCON_RXMODE_CPU; + wr_regl(port, S3C2410_UCON, ucon); + + ourport->rx_mode = S3C24XX_RX_PIO; +} + +static irqreturn_t s3c24xx_serial_rx_chars_dma(int irq, void *dev_id) +{ + unsigned int utrstat, ufstat, received; + struct s3c24xx_uart_port *ourport = dev_id; + struct uart_port *port = &ourport->port; + struct s3c24xx_uart_dma *dma = ourport->dma; + struct tty_struct *tty = tty_port_tty_get(&ourport->port.state->port); + struct tty_port *t = &port->state->port; + unsigned long flags; + struct dma_tx_state state; + + utrstat = rd_regl(port, S3C2410_UTRSTAT); + ufstat = rd_regl(port, S3C2410_UFSTAT); + + spin_lock_irqsave(&port->lock, flags); + + if (!(utrstat & S3C2410_UTRSTAT_TIMEOUT)) { + s3c64xx_start_rx_dma(ourport); + if (ourport->rx_mode == S3C24XX_RX_PIO) + enable_rx_dma(ourport); + goto finish; + } + + if (ourport->rx_mode == S3C24XX_RX_DMA) { + dmaengine_pause(dma->rx_chan); + dmaengine_tx_status(dma->rx_chan, dma->rx_cookie, &state); + dmaengine_terminate_all(dma->rx_chan); + received = dma->rx_bytes_requested - state.residue; + s3c24xx_uart_copy_rx_to_tty(ourport, t, received); + + enable_rx_pio(ourport); + } + + uart_rx_drain_fifo(ourport); + + if (tty) { + tty_flip_buffer_push(t); + tty_kref_put(tty); + } + + wr_regl(port, S3C2410_UTRSTAT, S3C2410_UTRSTAT_TIMEOUT); + +finish: + spin_unlock_irqrestore(&port->lock, flags); + + return IRQ_HANDLED; +} + +static irqreturn_t s3c24xx_serial_rx_chars_pio(int irq, void *dev_id) { struct s3c24xx_uart_port *ourport = dev_id; struct uart_port *port = &ourport->port; @@ -324,16 +720,33 @@ out: return IRQ_HANDLED; } + +static irqreturn_t s3c24xx_serial_rx_chars(int irq, void *dev_id) +{ + struct s3c24xx_uart_port *ourport = dev_id; + + if (ourport->dma && ourport->dma->rx_chan) + return s3c24xx_serial_rx_chars_dma(irq, dev_id); + return s3c24xx_serial_rx_chars_pio(irq, dev_id); +} + static irqreturn_t s3c24xx_serial_tx_chars(int irq, void *id) { struct s3c24xx_uart_port *ourport = id; struct uart_port *port = &ourport->port; struct circ_buf *xmit = &port->state->xmit; unsigned long flags; - int count = port->fifosize; + int count; spin_lock_irqsave(&port->lock, flags); + count = CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE); + + if (ourport->dma && ourport->dma->tx_chan && count >= port->fifosize) { + s3c24xx_serial_start_tx_dma(ourport, count); + goto out; + } + if (port->x_char) { wr_regb(port, S3C2410_UTXH, port->x_char); port->icount.tx++; @@ -352,6 +765,7 @@ static irqreturn_t s3c24xx_serial_tx_chars(int irq, void *id) /* try and drain the buffer... */ + count = port->fifosize; while (!uart_circ_empty(xmit) && count-- > 0) { if (rd_regl(port, S3C2410_UFSTAT) & ourport->info->tx_fifofull) break; @@ -453,6 +867,93 @@ static void s3c24xx_serial_break_ctl(struct uart_port *port, int break_state) spin_unlock_irqrestore(&port->lock, flags); } +static int s3c24xx_serial_request_dma(struct s3c24xx_uart_port *p) +{ + struct s3c24xx_uart_dma *dma = p->dma; + dma_cap_mask_t mask; + unsigned long flags; + + /* Default slave configuration parameters */ + dma->rx_conf.direction = DMA_DEV_TO_MEM; + dma->rx_conf.src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE; + dma->rx_conf.src_addr = p->port.mapbase + S3C2410_URXH; + dma->rx_conf.src_maxburst = 16; + + dma->tx_conf.direction = DMA_MEM_TO_DEV; + dma->tx_conf.dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE; + dma->tx_conf.dst_addr = p->port.mapbase + S3C2410_UTXH; + if (dma_get_cache_alignment() >= 16) + dma->tx_conf.dst_maxburst = 16; + else + dma->tx_conf.dst_maxburst = 1; + + dma_cap_zero(mask); + dma_cap_set(DMA_SLAVE, mask); + + dma->rx_chan = dma_request_slave_channel_compat(mask, dma->fn, + dma->rx_param, p->port.dev, "rx"); + if (!dma->rx_chan) + return -ENODEV; + + dmaengine_slave_config(dma->rx_chan, &dma->rx_conf); + + dma->tx_chan = dma_request_slave_channel_compat(mask, dma->fn, + dma->tx_param, p->port.dev, "tx"); + if (!dma->tx_chan) { + dma_release_channel(dma->rx_chan); + return -ENODEV; + } + + dmaengine_slave_config(dma->tx_chan, &dma->tx_conf); + + /* RX buffer */ + dma->rx_size = PAGE_SIZE; + + dma->rx_buf = kmalloc(dma->rx_size, GFP_KERNEL); + + if (!dma->rx_buf) { + dma_release_channel(dma->rx_chan); + dma_release_channel(dma->tx_chan); + return -ENOMEM; + } + + dma->rx_addr = dma_map_single(dma->rx_chan->device->dev, dma->rx_buf, + dma->rx_size, DMA_FROM_DEVICE); + + spin_lock_irqsave(&p->port.lock, flags); + + /* TX buffer */ + dma->tx_addr = dma_map_single(dma->tx_chan->device->dev, + p->port.state->xmit.buf, + UART_XMIT_SIZE, DMA_TO_DEVICE); + + spin_unlock_irqrestore(&p->port.lock, flags); + + return 0; +} + +static void s3c24xx_serial_release_dma(struct s3c24xx_uart_port *p) +{ + struct s3c24xx_uart_dma *dma = p->dma; + + if (dma->rx_chan) { + dmaengine_terminate_all(dma->rx_chan); + dma_unmap_single(dma->rx_chan->device->dev, dma->rx_addr, + dma->rx_size, DMA_FROM_DEVICE); + kfree(dma->rx_buf); + dma_release_channel(dma->rx_chan); + dma->rx_chan = NULL; + } + + if (dma->tx_chan) { + dmaengine_terminate_all(dma->tx_chan); + dma_unmap_single(dma->tx_chan->device->dev, dma->tx_addr, + UART_XMIT_SIZE, DMA_TO_DEVICE); + dma_release_channel(dma->tx_chan); + dma->tx_chan = NULL; + } +} + static void s3c24xx_serial_shutdown(struct uart_port *port) { struct s3c24xx_uart_port *ourport = to_ourport(port); @@ -478,6 +979,11 @@ static void s3c24xx_serial_shutdown(struct uart_port *port) wr_regl(port, S3C64XX_UINTP, 0xf); wr_regl(port, S3C64XX_UINTM, 0xf); } + + if (ourport->dma) + s3c24xx_serial_release_dma(ourport); + + ourport->tx_in_progress = 0; } static int s3c24xx_serial_startup(struct uart_port *port) @@ -529,12 +1035,21 @@ err: static int s3c64xx_serial_startup(struct uart_port *port) { struct s3c24xx_uart_port *ourport = to_ourport(port); + unsigned long flags; + unsigned int ufcon; int ret; dbg("s3c64xx_serial_startup: port=%p (%08llx,%p)\n", port, (unsigned long long)port->mapbase, port->membase); wr_regl(port, S3C64XX_UINTM, 0xf); + if (ourport->dma) { + ret = s3c24xx_serial_request_dma(ourport); + if (ret < 0) { + dev_warn(port->dev, "DMA request failed\n"); + return ret; + } + } ret = request_irq(port->irq, s3c64xx_serial_handle_irq, IRQF_SHARED, s3c24xx_serial_portname(port), ourport); @@ -549,8 +1064,20 @@ static int s3c64xx_serial_startup(struct uart_port *port) tx_enabled(port) = 0; ourport->tx_claimed = 1; + spin_lock_irqsave(&port->lock, flags); + + ufcon = rd_regl(port, S3C2410_UFCON); + ufcon |= S3C2410_UFCON_RESETRX | S3C2410_UFCON_RESETTX | + S5PV210_UFCON_RXTRIG8; + wr_regl(port, S3C2410_UFCON, ufcon); + + enable_rx_pio(ourport); + + spin_unlock_irqrestore(&port->lock, flags); + /* Enable Rx Interrupt */ __clear_bit(S3C64XX_UINTM_RXD, portaddrl(port, S3C64XX_UINTM)); + dbg("s3c64xx_serial_startup ok\n"); return ret; } @@ -1209,6 +1736,18 @@ static int s3c24xx_serial_init_port(struct s3c24xx_uart_port *ourport, ret = platform_get_irq(platdev, 1); if (ret > 0) ourport->tx_irq = ret; + /* + * DMA is currently supported only on DT platforms, if DMA properties + * are specified. + */ + if (platdev->dev.of_node && of_find_property(platdev->dev.of_node, + "dmas", NULL)) { + ourport->dma = devm_kzalloc(port->dev, + sizeof(*ourport->dma), + GFP_KERNEL); + if (!ourport->dma) + return -ENOMEM; + } ourport->clk = clk_get(&platdev->dev, "uart"); if (IS_ERR(ourport->clk)) { @@ -1857,6 +2396,111 @@ static struct platform_driver samsung_serial_driver = { module_platform_driver(samsung_serial_driver); +#ifdef CONFIG_SERIAL_SAMSUNG_CONSOLE +/* + * Early console. + */ + +struct samsung_early_console_data { + u32 txfull_mask; +}; + +static void samsung_early_busyuart(struct uart_port *port) +{ + while (!(readl(port->membase + S3C2410_UTRSTAT) & S3C2410_UTRSTAT_TXFE)) + ; +} + +static void samsung_early_busyuart_fifo(struct uart_port *port) +{ + struct samsung_early_console_data *data = port->private_data; + + while (readl(port->membase + S3C2410_UFSTAT) & data->txfull_mask) + ; +} + +static void samsung_early_putc(struct uart_port *port, int c) +{ + if (readl(port->membase + S3C2410_UFCON) & S3C2410_UFCON_FIFOMODE) + samsung_early_busyuart_fifo(port); + else + samsung_early_busyuart(port); + + writeb(c, port->membase + S3C2410_UTXH); +} + +static void samsung_early_write(struct console *con, const char *s, unsigned n) +{ + struct earlycon_device *dev = con->data; + + uart_console_write(&dev->port, s, n, samsung_early_putc); +} + +static int __init samsung_early_console_setup(struct earlycon_device *device, + const char *opt) +{ + if (!device->port.membase) + return -ENODEV; + + device->con->write = samsung_early_write; + return 0; +} + +/* S3C2410 */ +static struct samsung_early_console_data s3c2410_early_console_data = { + .txfull_mask = S3C2410_UFSTAT_TXFULL, +}; + +static int __init s3c2410_early_console_setup(struct earlycon_device *device, + const char *opt) +{ + device->port.private_data = &s3c2410_early_console_data; + return samsung_early_console_setup(device, opt); +} +OF_EARLYCON_DECLARE(s3c2410, "samsung,s3c2410-uart", + s3c2410_early_console_setup); +EARLYCON_DECLARE(s3c2410, s3c2410_early_console_setup); + +/* S3C2412, S3C2440, S3C64xx */ +static struct samsung_early_console_data s3c2440_early_console_data = { + .txfull_mask = S3C2440_UFSTAT_TXFULL, +}; + +static int __init s3c2440_early_console_setup(struct earlycon_device *device, + const char *opt) +{ + device->port.private_data = &s3c2440_early_console_data; + return samsung_early_console_setup(device, opt); +} +OF_EARLYCON_DECLARE(s3c2412, "samsung,s3c2412-uart", + s3c2440_early_console_setup); +OF_EARLYCON_DECLARE(s3c2440, "samsung,s3c2440-uart", + s3c2440_early_console_setup); +OF_EARLYCON_DECLARE(s3c6400, "samsung,s3c6400-uart", + s3c2440_early_console_setup); +EARLYCON_DECLARE(s3c2412, s3c2440_early_console_setup); +EARLYCON_DECLARE(s3c2440, s3c2440_early_console_setup); +EARLYCON_DECLARE(s3c6400, s3c2440_early_console_setup); + +/* S5PV210, EXYNOS */ +static struct samsung_early_console_data s5pv210_early_console_data = { + .txfull_mask = S5PV210_UFSTAT_TXFULL, +}; + +static int __init s5pv210_early_console_setup(struct earlycon_device *device, + const char *opt) +{ + device->port.private_data = &s5pv210_early_console_data; + return samsung_early_console_setup(device, opt); +} +OF_EARLYCON_DECLARE(s5pv210, "samsung,s5pv210-uart", + s5pv210_early_console_setup); +OF_EARLYCON_DECLARE(exynos4210, "samsung,exynos4210-uart", + s5pv210_early_console_setup); +EARLYCON_DECLARE(s5pv210, s5pv210_early_console_setup); +EARLYCON_DECLARE(exynos4210, s5pv210_early_console_setup); +#endif + MODULE_ALIAS("platform:samsung-uart"); MODULE_DESCRIPTION("Samsung SoC Serial port driver"); MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>"); diff --git a/drivers/tty/serial/samsung.h b/drivers/tty/serial/samsung.h index eb071dd19b2d..d275032aa68d 100644 --- a/drivers/tty/serial/samsung.h +++ b/drivers/tty/serial/samsung.h @@ -12,6 +12,8 @@ * published by the Free Software Foundation. */ +#include <linux/dmaengine.h> + struct s3c24xx_uart_info { char *name; unsigned int type; @@ -41,6 +43,40 @@ struct s3c24xx_serial_drv_data { unsigned int fifosize[CONFIG_SERIAL_SAMSUNG_UARTS]; }; +struct s3c24xx_uart_dma { + dma_filter_fn fn; + void *rx_param; + void *tx_param; + + unsigned int rx_chan_id; + unsigned int tx_chan_id; + + struct dma_slave_config rx_conf; + struct dma_slave_config tx_conf; + + struct dma_chan *rx_chan; + struct dma_chan *tx_chan; + + dma_addr_t rx_addr; + dma_addr_t tx_addr; + + dma_cookie_t rx_cookie; + dma_cookie_t tx_cookie; + + char *rx_buf; + + dma_addr_t tx_transfer_addr; + + size_t rx_size; + size_t tx_size; + + struct dma_async_tx_descriptor *tx_desc; + struct dma_async_tx_descriptor *rx_desc; + + int tx_bytes_requested; + int rx_bytes_requested; +}; + struct s3c24xx_uart_port { unsigned char rx_claimed; unsigned char tx_claimed; @@ -50,6 +86,10 @@ struct s3c24xx_uart_port { unsigned int rx_irq; unsigned int tx_irq; + unsigned int tx_in_progress; + unsigned int tx_mode; + unsigned int rx_mode; + struct s3c24xx_uart_info *info; struct clk *clk; struct clk *baudclk; @@ -59,6 +99,8 @@ struct s3c24xx_uart_port { /* reference to platform data */ struct s3c2410_uartcfg *cfg; + struct s3c24xx_uart_dma *dma; + #ifdef CONFIG_CPU_FREQ struct notifier_block freq_transition; #endif diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c index 984605bb5bf1..6a1055ae3437 100644 --- a/drivers/tty/serial/serial_core.c +++ b/drivers/tty/serial/serial_core.c @@ -179,14 +179,6 @@ static int uart_port_startup(struct tty_struct *tty, struct uart_state *state, if (tty->termios.c_cflag & CBAUD) uart_set_mctrl(uport, TIOCM_RTS | TIOCM_DTR); } - - spin_lock_irq(&uport->lock); - if (uart_cts_enabled(uport) && - !(uport->ops->get_mctrl(uport) & TIOCM_CTS)) - uport->hw_stopped = 1; - else - uport->hw_stopped = 0; - spin_unlock_irq(&uport->lock); } /* @@ -442,6 +434,7 @@ static void uart_change_speed(struct tty_struct *tty, struct uart_state *state, { struct uart_port *uport = state->uart_port; struct ktermios *termios; + int hw_stopped; /* * If we have no tty, termios, or the port does not exist, @@ -466,6 +459,18 @@ static void uart_change_speed(struct tty_struct *tty, struct uart_state *state, uport->status &= ~UPSTAT_DCD_ENABLE; else uport->status |= UPSTAT_DCD_ENABLE; + + /* reset sw-assisted CTS flow control based on (possibly) new mode */ + hw_stopped = uport->hw_stopped; + uport->hw_stopped = uart_softcts_mode(uport) && + !(uport->ops->get_mctrl(uport) & TIOCM_CTS); + if (uport->hw_stopped) { + if (!hw_stopped) + uport->ops->stop_tx(uport); + } else { + if (hw_stopped) + __uart_start(tty); + } spin_unlock_irq(&uport->lock); } @@ -619,22 +624,22 @@ static void uart_throttle(struct tty_struct *tty) { struct uart_state *state = tty->driver_data; struct uart_port *port = state->uart_port; - upf_t mask = 0; + upstat_t mask = 0; if (I_IXOFF(tty)) - mask |= UPF_SOFT_FLOW; + mask |= UPSTAT_AUTOXOFF; if (tty->termios.c_cflag & CRTSCTS) - mask |= UPF_HARD_FLOW; + mask |= UPSTAT_AUTORTS; - if (port->flags & mask) { + if (port->status & mask) { port->ops->throttle(port); - mask &= ~port->flags; + mask &= ~port->status; } - if (mask & UPF_SOFT_FLOW) + if (mask & UPSTAT_AUTOXOFF) uart_send_xchar(tty, STOP_CHAR(tty)); - if (mask & UPF_HARD_FLOW) + if (mask & UPSTAT_AUTORTS) uart_clear_mctrl(port, TIOCM_RTS); } @@ -642,22 +647,22 @@ static void uart_unthrottle(struct tty_struct *tty) { struct uart_state *state = tty->driver_data; struct uart_port *port = state->uart_port; - upf_t mask = 0; + upstat_t mask = 0; if (I_IXOFF(tty)) - mask |= UPF_SOFT_FLOW; + mask |= UPSTAT_AUTOXOFF; if (tty->termios.c_cflag & CRTSCTS) - mask |= UPF_HARD_FLOW; + mask |= UPSTAT_AUTORTS; - if (port->flags & mask) { + if (port->status & mask) { port->ops->unthrottle(port); - mask &= ~port->flags; + mask &= ~port->status; } - if (mask & UPF_SOFT_FLOW) + if (mask & UPSTAT_AUTOXOFF) uart_send_xchar(tty, START_CHAR(tty)); - if (mask & UPF_HARD_FLOW) + if (mask & UPSTAT_AUTORTS) uart_set_mctrl(port, TIOCM_RTS); } @@ -1351,30 +1356,6 @@ static void uart_set_termios(struct tty_struct *tty, mask |= TIOCM_RTS; uart_set_mctrl(uport, mask); } - - /* - * If the port is doing h/w assisted flow control, do nothing. - * We assume that port->hw_stopped has never been set. - */ - if (uport->flags & UPF_HARD_FLOW) - return; - - /* Handle turning off CRTSCTS */ - if ((old_termios->c_cflag & CRTSCTS) && !(cflag & CRTSCTS)) { - spin_lock_irq(&uport->lock); - uport->hw_stopped = 0; - __uart_start(tty); - spin_unlock_irq(&uport->lock); - } - /* Handle turning on CRTSCTS */ - else if (!(old_termios->c_cflag & CRTSCTS) && (cflag & CRTSCTS)) { - spin_lock_irq(&uport->lock); - if (!(uport->ops->get_mctrl(uport) & TIOCM_CTS)) { - uport->hw_stopped = 1; - uport->ops->stop_tx(uport); - } - spin_unlock_irq(&uport->lock); - } } /* @@ -2008,23 +1989,24 @@ int uart_suspend_port(struct uart_driver *drv, struct uart_port *uport) } put_device(tty_dev); - if (console_suspend_enabled || !uart_console(uport)) - uport->suspended = 1; + /* Nothing to do if the console is not suspending */ + if (!console_suspend_enabled && uart_console(uport)) + goto unlock; + + uport->suspended = 1; if (port->flags & ASYNC_INITIALIZED) { const struct uart_ops *ops = uport->ops; int tries; - if (console_suspend_enabled || !uart_console(uport)) { - set_bit(ASYNCB_SUSPENDED, &port->flags); - clear_bit(ASYNCB_INITIALIZED, &port->flags); - - spin_lock_irq(&uport->lock); - ops->stop_tx(uport); - ops->set_mctrl(uport, 0); - ops->stop_rx(uport); - spin_unlock_irq(&uport->lock); - } + set_bit(ASYNCB_SUSPENDED, &port->flags); + clear_bit(ASYNCB_INITIALIZED, &port->flags); + + spin_lock_irq(&uport->lock); + ops->stop_tx(uport); + ops->set_mctrl(uport, 0); + ops->stop_rx(uport); + spin_unlock_irq(&uport->lock); /* * Wait for the transmitter to empty. @@ -2036,19 +2018,17 @@ int uart_suspend_port(struct uart_driver *drv, struct uart_port *uport) drv->dev_name, drv->tty_driver->name_base + uport->line); - if (console_suspend_enabled || !uart_console(uport)) - ops->shutdown(uport); + ops->shutdown(uport); } /* * Disable the console device before suspending. */ - if (console_suspend_enabled && uart_console(uport)) + if (uart_console(uport)) console_stop(uport->cons); - if (console_suspend_enabled || !uart_console(uport)) - uart_change_pm(state, UART_PM_STATE_OFF); - + uart_change_pm(state, UART_PM_STATE_OFF); +unlock: mutex_unlock(&port->mutex); return 0; @@ -2856,7 +2836,7 @@ void uart_handle_cts_change(struct uart_port *uport, unsigned int status) uport->icount.cts++; - if (uart_cts_enabled(uport)) { + if (uart_softcts_mode(uport)) { if (uport->hw_stopped) { if (status) { uport->hw_stopped = 0; @@ -2869,6 +2849,7 @@ void uart_handle_cts_change(struct uart_port *uport, unsigned int status) uport->ops->stop_tx(uport); } } + } } EXPORT_SYMBOL_GPL(uart_handle_cts_change); diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c index e032963989fc..5b50c792ad5f 100644 --- a/drivers/tty/serial/sh-sci.c +++ b/drivers/tty/serial/sh-sci.c @@ -858,7 +858,7 @@ static int sci_handle_fifo_overrun(struct uart_port *port) tty_insert_flip_char(tport, 0, TTY_OVERRUN); tty_flip_buffer_push(tport); - dev_notice(port->dev, "overrun error\n"); + dev_dbg(port->dev, "overrun error\n"); copied++; } @@ -997,12 +997,15 @@ static inline unsigned long port_rx_irq_mask(struct uart_port *port) static irqreturn_t sci_mpxed_interrupt(int irq, void *ptr) { unsigned short ssr_status, scr_status, err_enabled; + unsigned short slr_status = 0; struct uart_port *port = ptr; struct sci_port *s = to_sci_port(port); irqreturn_t ret = IRQ_NONE; ssr_status = serial_port_in(port, SCxSR); scr_status = serial_port_in(port, SCSCR); + if (port->type == PORT_SCIF || port->type == PORT_HSCIF) + slr_status = serial_port_in(port, SCLSR); err_enabled = scr_status & port_rx_irq_mask(port); /* Tx Interrupt */ @@ -1015,8 +1018,11 @@ static irqreturn_t sci_mpxed_interrupt(int irq, void *ptr) * DR flags */ if (((ssr_status & SCxSR_RDxF(port)) || s->chan_rx) && - (scr_status & SCSCR_RIE)) + (scr_status & SCSCR_RIE)) { + if (port->type == PORT_SCIF || port->type == PORT_HSCIF) + sci_handle_fifo_overrun(port); ret = sci_rx_interrupt(irq, ptr); + } /* Error Interrupt */ if ((ssr_status & SCxSR_ERRORS(port)) && err_enabled) @@ -1026,6 +1032,12 @@ static irqreturn_t sci_mpxed_interrupt(int irq, void *ptr) if ((ssr_status & SCxSR_BRK(port)) && err_enabled) ret = sci_br_interrupt(irq, ptr); + /* Overrun Interrupt */ + if (port->type == PORT_SCIF || port->type == PORT_HSCIF) { + if (slr_status & 0x01) + sci_handle_fifo_overrun(port); + } + return ret; } @@ -2605,7 +2617,7 @@ static int sci_probe(struct platform_device *dev) return 0; } -static int sci_suspend(struct device *dev) +static __maybe_unused int sci_suspend(struct device *dev) { struct sci_port *sport = dev_get_drvdata(dev); @@ -2615,7 +2627,7 @@ static int sci_suspend(struct device *dev) return 0; } -static int sci_resume(struct device *dev) +static __maybe_unused int sci_resume(struct device *dev) { struct sci_port *sport = dev_get_drvdata(dev); @@ -2625,10 +2637,7 @@ static int sci_resume(struct device *dev) return 0; } -static const struct dev_pm_ops sci_dev_pm_ops = { - .suspend = sci_suspend, - .resume = sci_resume, -}; +static SIMPLE_DEV_PM_OPS(sci_dev_pm_ops, sci_suspend, sci_resume); static struct platform_driver sci_driver = { .probe = sci_probe, diff --git a/drivers/tty/serial/sirfsoc_uart.c b/drivers/tty/serial/sirfsoc_uart.c index b269f6bd16d6..27ed0e960880 100644 --- a/drivers/tty/serial/sirfsoc_uart.c +++ b/drivers/tty/serial/sirfsoc_uart.c @@ -177,7 +177,7 @@ static void sirfsoc_uart_stop_tx(struct uart_port *port) dmaengine_pause(sirfport->tx_dma_chan); sirfport->tx_dma_state = TX_DMA_PAUSE; } else { - if (!sirfport->is_marco) + if (!sirfport->is_atlas7) wr_regl(port, ureg->sirfsoc_int_en_reg, rd_regl(port, ureg->sirfsoc_int_en_reg) & ~uint_en->sirfsoc_txfifo_empty_en); @@ -186,7 +186,7 @@ static void sirfsoc_uart_stop_tx(struct uart_port *port) uint_en->sirfsoc_txfifo_empty_en); } } else { - if (!sirfport->is_marco) + if (!sirfport->is_atlas7) wr_regl(port, ureg->sirfsoc_int_en_reg, rd_regl(port, ureg->sirfsoc_int_en_reg) & ~uint_en->sirfsoc_txfifo_empty_en); @@ -217,7 +217,7 @@ static void sirfsoc_uart_tx_with_dma(struct sirfsoc_uart_port *sirfport) } if (sirfport->tx_dma_state == TX_DMA_RUNNING) return; - if (!sirfport->is_marco) + if (!sirfport->is_atlas7) wr_regl(port, ureg->sirfsoc_int_en_reg, rd_regl(port, ureg->sirfsoc_int_en_reg)& ~(uint_en->sirfsoc_txfifo_empty_en)); @@ -244,7 +244,7 @@ static void sirfsoc_uart_tx_with_dma(struct sirfsoc_uart_port *sirfport) } if (tran_size < 4) sirfsoc_uart_pio_tx_chars(sirfport, tran_size); - if (!sirfport->is_marco) + if (!sirfport->is_atlas7) wr_regl(port, ureg->sirfsoc_int_en_reg, rd_regl(port, ureg->sirfsoc_int_en_reg)| uint_en->sirfsoc_txfifo_empty_en); @@ -293,7 +293,7 @@ static void sirfsoc_uart_start_tx(struct uart_port *port) sirfsoc_uart_pio_tx_chars(sirfport, SIRFSOC_UART_IO_TX_REASONABLE_CNT); wr_regl(port, ureg->sirfsoc_tx_fifo_op, SIRFUART_FIFO_START); - if (!sirfport->is_marco) + if (!sirfport->is_atlas7) wr_regl(port, ureg->sirfsoc_int_en_reg, rd_regl(port, ureg->sirfsoc_int_en_reg)| uint_en->sirfsoc_txfifo_empty_en); @@ -311,7 +311,7 @@ static void sirfsoc_uart_stop_rx(struct uart_port *port) wr_regl(port, ureg->sirfsoc_rx_fifo_op, 0); if (sirfport->rx_dma_chan) { - if (!sirfport->is_marco) + if (!sirfport->is_atlas7) wr_regl(port, ureg->sirfsoc_int_en_reg, rd_regl(port, ureg->sirfsoc_int_en_reg) & ~(SIRFUART_RX_DMA_INT_EN(port, uint_en) | @@ -322,7 +322,7 @@ static void sirfsoc_uart_stop_rx(struct uart_port *port) uint_en->sirfsoc_rx_done_en); dmaengine_terminate_all(sirfport->rx_dma_chan); } else { - if (!sirfport->is_marco) + if (!sirfport->is_atlas7) wr_regl(port, ureg->sirfsoc_int_en_reg, rd_regl(port, ureg->sirfsoc_int_en_reg)& ~(SIRFUART_RX_IO_INT_EN(port, uint_en))); @@ -344,7 +344,7 @@ static void sirfsoc_uart_disable_ms(struct uart_port *port) if (sirfport->uart_reg->uart_type == SIRF_REAL_UART) { wr_regl(port, ureg->sirfsoc_afc_ctrl, rd_regl(port, ureg->sirfsoc_afc_ctrl) & ~0x3FF); - if (!sirfport->is_marco) + if (!sirfport->is_atlas7) wr_regl(port, ureg->sirfsoc_int_en_reg, rd_regl(port, ureg->sirfsoc_int_en_reg)& ~uint_en->sirfsoc_cts_en); @@ -380,7 +380,7 @@ static void sirfsoc_uart_enable_ms(struct uart_port *port) wr_regl(port, ureg->sirfsoc_afc_ctrl, rd_regl(port, ureg->sirfsoc_afc_ctrl) | SIRFUART_AFC_TX_EN | SIRFUART_AFC_RX_EN); - if (!sirfport->is_marco) + if (!sirfport->is_atlas7) wr_regl(port, ureg->sirfsoc_int_en_reg, rd_regl(port, ureg->sirfsoc_int_en_reg) | uint_en->sirfsoc_cts_en); @@ -544,7 +544,7 @@ static void sirfsoc_rx_tmo_process_tl(unsigned long param) sirfport->rx_io_count = 0; wr_regl(port, ureg->sirfsoc_int_st_reg, uint_st->sirfsoc_rx_done); - if (!sirfport->is_marco) + if (!sirfport->is_atlas7) wr_regl(port, ureg->sirfsoc_int_en_reg, rd_regl(port, ureg->sirfsoc_int_en_reg) & ~(uint_en->sirfsoc_rx_done_en)); @@ -555,7 +555,7 @@ static void sirfsoc_rx_tmo_process_tl(unsigned long param) } else { wr_regl(port, ureg->sirfsoc_int_st_reg, uint_st->sirfsoc_rx_done); - if (!sirfport->is_marco) + if (!sirfport->is_atlas7) wr_regl(port, ureg->sirfsoc_int_en_reg, rd_regl(port, ureg->sirfsoc_int_en_reg) | (uint_en->sirfsoc_rx_done_en)); @@ -578,7 +578,7 @@ static void sirfsoc_uart_handle_rx_tmo(struct sirfsoc_uart_port *sirfport) dmaengine_terminate_all(sirfport->rx_dma_chan); sirfport->rx_dma_items[sirfport->rx_issued].xmit.head = SIRFSOC_RX_DMA_BUF_SIZE - tx_state.residue; - if (!sirfport->is_marco) + if (!sirfport->is_atlas7) wr_regl(port, ureg->sirfsoc_int_en_reg, rd_regl(port, ureg->sirfsoc_int_en_reg) & ~(uint_en->sirfsoc_rx_timeout_en)); @@ -598,7 +598,7 @@ static void sirfsoc_uart_handle_rx_done(struct sirfsoc_uart_port *sirfport) sirfsoc_uart_pio_rx_chars(port, 4 - sirfport->rx_io_count); if (sirfport->rx_io_count == 4) { sirfport->rx_io_count = 0; - if (!sirfport->is_marco) + if (!sirfport->is_atlas7) wr_regl(port, ureg->sirfsoc_int_en_reg, rd_regl(port, ureg->sirfsoc_int_en_reg) & ~(uint_en->sirfsoc_rx_done_en)); @@ -748,7 +748,7 @@ static void sirfsoc_uart_start_next_rx_dma(struct uart_port *port) for (i = 0; i < SIRFSOC_RX_LOOP_BUF_CNT; i++) sirfsoc_rx_submit_one_dma_desc(port, i); sirfport->rx_completed = sirfport->rx_issued = 0; - if (!sirfport->is_marco) + if (!sirfport->is_atlas7) wr_regl(port, ureg->sirfsoc_int_en_reg, rd_regl(port, ureg->sirfsoc_int_en_reg) | SIRFUART_RX_DMA_INT_EN(port, uint_en)); @@ -770,7 +770,7 @@ static void sirfsoc_uart_start_rx(struct uart_port *port) if (sirfport->rx_dma_chan) sirfsoc_uart_start_next_rx_dma(port); else { - if (!sirfport->is_marco) + if (!sirfport->is_atlas7) wr_regl(port, ureg->sirfsoc_int_en_reg, rd_regl(port, ureg->sirfsoc_int_en_reg) | SIRFUART_RX_IO_INT_EN(port, uint_en)); @@ -1124,7 +1124,7 @@ static void sirfsoc_uart_shutdown(struct uart_port *port) { struct sirfsoc_uart_port *sirfport = to_sirfport(port); struct sirfsoc_register *ureg = &sirfport->uart_reg->uart_reg; - if (!sirfport->is_marco) + if (!sirfport->is_atlas7) wr_regl(port, ureg->sirfsoc_int_en_reg, 0); else wr_regl(port, SIRFUART_INT_EN_CLR, ~0UL); @@ -1271,7 +1271,7 @@ static struct uart_driver sirfsoc_uart_drv = { static struct of_device_id sirfsoc_uart_ids[] = { { .compatible = "sirf,prima2-uart", .data = &sirfsoc_uart,}, - { .compatible = "sirf,marco-uart", .data = &sirfsoc_uart}, + { .compatible = "sirf,atlas7-uart", .data = &sirfsoc_uart}, { .compatible = "sirf,prima2-usp-uart", .data = &sirfsoc_usp}, {} }; @@ -1350,8 +1350,8 @@ static int sirfsoc_uart_probe(struct platform_device *pdev) gpio_direction_output(sirfport->rts_gpio, 1); } usp_no_flow_control: - if (of_device_is_compatible(pdev->dev.of_node, "sirf,marco-uart")) - sirfport->is_marco = true; + if (of_device_is_compatible(pdev->dev.of_node, "sirf,atlas7-uart")) + sirfport->is_atlas7 = true; if (of_property_read_u32(pdev->dev.of_node, "fifosize", @@ -1393,7 +1393,7 @@ usp_no_flow_control: goto err; } port->uartclk = clk_get_rate(sirfport->clk); - if (of_device_is_compatible(pdev->dev.of_node, "sirf,marco-bt-uart")) { + if (of_device_is_compatible(pdev->dev.of_node, "sirf,atlas7-bt-uart")) { sirfport->clk_general = devm_clk_get(&pdev->dev, "general"); if (IS_ERR(sirfport->clk_general)) { ret = PTR_ERR(sirfport->clk_general); diff --git a/drivers/tty/serial/sirfsoc_uart.h b/drivers/tty/serial/sirfsoc_uart.h index 275d03893990..727eb6b88fff 100644 --- a/drivers/tty/serial/sirfsoc_uart.h +++ b/drivers/tty/serial/sirfsoc_uart.h @@ -421,8 +421,8 @@ struct sirfsoc_uart_port { bool is_bt_uart; struct clk *clk_general; struct clk *clk_noc; - /* for SiRFmarco, there are SET/CLR for UART_INT_EN */ - bool is_marco; + /* for SiRFatlas7, there are SET/CLR for UART_INT_EN */ + bool is_atlas7; struct sirfsoc_uart_register *uart_reg; struct dma_chan *rx_dma_chan; struct dma_chan *tx_dma_chan; diff --git a/drivers/tty/serial/sprd_serial.c b/drivers/tty/serial/sprd_serial.c new file mode 100644 index 000000000000..594b63331ef4 --- /dev/null +++ b/drivers/tty/serial/sprd_serial.c @@ -0,0 +1,793 @@ +/* + * Copyright (C) 2012-2015 Spreadtrum Communications Inc. + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#if defined(CONFIG_SERIAL_SPRD_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) +#define SUPPORT_SYSRQ +#endif + +#include <linux/clk.h> +#include <linux/console.h> +#include <linux/delay.h> +#include <linux/io.h> +#include <linux/ioport.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/platform_device.h> +#include <linux/serial_core.h> +#include <linux/serial.h> +#include <linux/slab.h> +#include <linux/tty.h> +#include <linux/tty_flip.h> + +/* device name */ +#define UART_NR_MAX 8 +#define SPRD_TTY_NAME "ttyS" +#define SPRD_FIFO_SIZE 128 +#define SPRD_DEF_RATE 26000000 +#define SPRD_BAUD_IO_LIMIT 3000000 +#define SPRD_TIMEOUT 256 + +/* the offset of serial registers and BITs for them */ +/* data registers */ +#define SPRD_TXD 0x0000 +#define SPRD_RXD 0x0004 + +/* line status register and its BITs */ +#define SPRD_LSR 0x0008 +#define SPRD_LSR_OE BIT(4) +#define SPRD_LSR_FE BIT(3) +#define SPRD_LSR_PE BIT(2) +#define SPRD_LSR_BI BIT(7) +#define SPRD_LSR_TX_OVER BIT(15) + +/* data number in TX and RX fifo */ +#define SPRD_STS1 0x000C + +/* interrupt enable register and its BITs */ +#define SPRD_IEN 0x0010 +#define SPRD_IEN_RX_FULL BIT(0) +#define SPRD_IEN_TX_EMPTY BIT(1) +#define SPRD_IEN_BREAK_DETECT BIT(7) +#define SPRD_IEN_TIMEOUT BIT(13) + +/* interrupt clear register */ +#define SPRD_ICLR 0x0014 + +/* line control register */ +#define SPRD_LCR 0x0018 +#define SPRD_LCR_STOP_1BIT 0x10 +#define SPRD_LCR_STOP_2BIT 0x30 +#define SPRD_LCR_DATA_LEN (BIT(2) | BIT(3)) +#define SPRD_LCR_DATA_LEN5 0x0 +#define SPRD_LCR_DATA_LEN6 0x4 +#define SPRD_LCR_DATA_LEN7 0x8 +#define SPRD_LCR_DATA_LEN8 0xc +#define SPRD_LCR_PARITY (BIT(0) | BIT(1)) +#define SPRD_LCR_PARITY_EN 0x2 +#define SPRD_LCR_EVEN_PAR 0x0 +#define SPRD_LCR_ODD_PAR 0x1 + +/* control register 1 */ +#define SPRD_CTL1 0x001C +#define RX_HW_FLOW_CTL_THLD BIT(6) +#define RX_HW_FLOW_CTL_EN BIT(7) +#define TX_HW_FLOW_CTL_EN BIT(8) +#define RX_TOUT_THLD_DEF 0x3E00 +#define RX_HFC_THLD_DEF 0x40 + +/* fifo threshold register */ +#define SPRD_CTL2 0x0020 +#define THLD_TX_EMPTY 0x40 +#define THLD_RX_FULL 0x40 + +/* config baud rate register */ +#define SPRD_CLKD0 0x0024 +#define SPRD_CLKD1 0x0028 + +/* interrupt mask status register */ +#define SPRD_IMSR 0x002C +#define SPRD_IMSR_RX_FIFO_FULL BIT(0) +#define SPRD_IMSR_TX_FIFO_EMPTY BIT(1) +#define SPRD_IMSR_BREAK_DETECT BIT(7) +#define SPRD_IMSR_TIMEOUT BIT(13) + +struct reg_backup { + u32 ien; + u32 ctrl0; + u32 ctrl1; + u32 ctrl2; + u32 clkd0; + u32 clkd1; + u32 dspwait; +}; + +struct sprd_uart_port { + struct uart_port port; + struct reg_backup reg_bak; + char name[16]; +}; + +static struct sprd_uart_port *sprd_port[UART_NR_MAX]; +static int sprd_ports_num; + +static inline unsigned int serial_in(struct uart_port *port, int offset) +{ + return readl_relaxed(port->membase + offset); +} + +static inline void serial_out(struct uart_port *port, int offset, int value) +{ + writel_relaxed(value, port->membase + offset); +} + +static unsigned int sprd_tx_empty(struct uart_port *port) +{ + if (serial_in(port, SPRD_STS1) & 0xff00) + return 0; + else + return TIOCSER_TEMT; +} + +static unsigned int sprd_get_mctrl(struct uart_port *port) +{ + return TIOCM_DSR | TIOCM_CTS; +} + +static void sprd_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ + /* nothing to do */ +} + +static void sprd_stop_tx(struct uart_port *port) +{ + unsigned int ien, iclr; + + iclr = serial_in(port, SPRD_ICLR); + ien = serial_in(port, SPRD_IEN); + + iclr |= SPRD_IEN_TX_EMPTY; + ien &= ~SPRD_IEN_TX_EMPTY; + + serial_out(port, SPRD_ICLR, iclr); + serial_out(port, SPRD_IEN, ien); +} + +static void sprd_start_tx(struct uart_port *port) +{ + unsigned int ien; + + ien = serial_in(port, SPRD_IEN); + if (!(ien & SPRD_IEN_TX_EMPTY)) { + ien |= SPRD_IEN_TX_EMPTY; + serial_out(port, SPRD_IEN, ien); + } +} + +static void sprd_stop_rx(struct uart_port *port) +{ + unsigned int ien, iclr; + + iclr = serial_in(port, SPRD_ICLR); + ien = serial_in(port, SPRD_IEN); + + ien &= ~(SPRD_IEN_RX_FULL | SPRD_IEN_BREAK_DETECT); + iclr |= SPRD_IEN_RX_FULL | SPRD_IEN_BREAK_DETECT; + + serial_out(port, SPRD_IEN, ien); + serial_out(port, SPRD_ICLR, iclr); +} + +/* The Sprd serial does not support this function. */ +static void sprd_break_ctl(struct uart_port *port, int break_state) +{ + /* nothing to do */ +} + +static int handle_lsr_errors(struct uart_port *port, + unsigned int *flag, + unsigned int *lsr) +{ + int ret = 0; + + /* statistics */ + if (*lsr & SPRD_LSR_BI) { + *lsr &= ~(SPRD_LSR_FE | SPRD_LSR_PE); + port->icount.brk++; + ret = uart_handle_break(port); + if (ret) + return ret; + } else if (*lsr & SPRD_LSR_PE) + port->icount.parity++; + else if (*lsr & SPRD_LSR_FE) + port->icount.frame++; + if (*lsr & SPRD_LSR_OE) + port->icount.overrun++; + + /* mask off conditions which should be ignored */ + *lsr &= port->read_status_mask; + if (*lsr & SPRD_LSR_BI) + *flag = TTY_BREAK; + else if (*lsr & SPRD_LSR_PE) + *flag = TTY_PARITY; + else if (*lsr & SPRD_LSR_FE) + *flag = TTY_FRAME; + + return ret; +} + +static inline void sprd_rx(struct uart_port *port) +{ + struct tty_port *tty = &port->state->port; + unsigned int ch, flag, lsr, max_count = SPRD_TIMEOUT; + + while ((serial_in(port, SPRD_STS1) & 0x00ff) && max_count--) { + lsr = serial_in(port, SPRD_LSR); + ch = serial_in(port, SPRD_RXD); + flag = TTY_NORMAL; + port->icount.rx++; + + if (lsr & (SPRD_LSR_BI | SPRD_LSR_PE | + SPRD_LSR_FE | SPRD_LSR_OE)) + if (handle_lsr_errors(port, &lsr, &flag)) + continue; + if (uart_handle_sysrq_char(port, ch)) + continue; + + uart_insert_char(port, lsr, SPRD_LSR_OE, ch, flag); + } + + tty_flip_buffer_push(tty); +} + +static inline void sprd_tx(struct uart_port *port) +{ + struct circ_buf *xmit = &port->state->xmit; + int count; + + if (port->x_char) { + serial_out(port, SPRD_TXD, port->x_char); + port->icount.tx++; + port->x_char = 0; + return; + } + + if (uart_circ_empty(xmit) || uart_tx_stopped(port)) { + sprd_stop_tx(port); + return; + } + + count = THLD_TX_EMPTY; + do { + serial_out(port, SPRD_TXD, xmit->buf[xmit->tail]); + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + port->icount.tx++; + if (uart_circ_empty(xmit)) + break; + } while (--count > 0); + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(port); + + if (uart_circ_empty(xmit)) + sprd_stop_tx(port); +} + +/* this handles the interrupt from one port */ +static irqreturn_t sprd_handle_irq(int irq, void *dev_id) +{ + struct uart_port *port = dev_id; + unsigned int ims; + + spin_lock(&port->lock); + + ims = serial_in(port, SPRD_IMSR); + + if (!ims) + return IRQ_NONE; + + serial_out(port, SPRD_ICLR, ~0); + + if (ims & (SPRD_IMSR_RX_FIFO_FULL | + SPRD_IMSR_BREAK_DETECT | SPRD_IMSR_TIMEOUT)) + sprd_rx(port); + + if (ims & SPRD_IMSR_TX_FIFO_EMPTY) + sprd_tx(port); + + spin_unlock(&port->lock); + + return IRQ_HANDLED; +} + +static int sprd_startup(struct uart_port *port) +{ + int ret = 0; + unsigned int ien, fc; + unsigned int timeout; + struct sprd_uart_port *sp; + unsigned long flags; + + serial_out(port, SPRD_CTL2, ((THLD_TX_EMPTY << 8) | THLD_RX_FULL)); + + /* clear rx fifo */ + timeout = SPRD_TIMEOUT; + while (timeout-- && serial_in(port, SPRD_STS1) & 0x00ff) + serial_in(port, SPRD_RXD); + + /* clear tx fifo */ + timeout = SPRD_TIMEOUT; + while (timeout-- && serial_in(port, SPRD_STS1) & 0xff00) + cpu_relax(); + + /* clear interrupt */ + serial_out(port, SPRD_IEN, 0); + serial_out(port, SPRD_ICLR, ~0); + + /* allocate irq */ + sp = container_of(port, struct sprd_uart_port, port); + snprintf(sp->name, sizeof(sp->name), "sprd_serial%d", port->line); + ret = devm_request_irq(port->dev, port->irq, sprd_handle_irq, + IRQF_SHARED, sp->name, port); + if (ret) { + dev_err(port->dev, "fail to request serial irq %d, ret=%d\n", + port->irq, ret); + return ret; + } + fc = serial_in(port, SPRD_CTL1); + fc |= RX_TOUT_THLD_DEF | RX_HFC_THLD_DEF; + serial_out(port, SPRD_CTL1, fc); + + /* enable interrupt */ + spin_lock_irqsave(&port->lock, flags); + ien = serial_in(port, SPRD_IEN); + ien |= SPRD_IEN_RX_FULL | SPRD_IEN_BREAK_DETECT | SPRD_IEN_TIMEOUT; + serial_out(port, SPRD_IEN, ien); + spin_unlock_irqrestore(&port->lock, flags); + + return 0; +} + +static void sprd_shutdown(struct uart_port *port) +{ + serial_out(port, SPRD_IEN, 0); + serial_out(port, SPRD_ICLR, ~0); + devm_free_irq(port->dev, port->irq, port); +} + +static void sprd_set_termios(struct uart_port *port, + struct ktermios *termios, + struct ktermios *old) +{ + unsigned int baud, quot; + unsigned int lcr = 0, fc; + unsigned long flags; + + /* ask the core to calculate the divisor for us */ + baud = uart_get_baud_rate(port, termios, old, 0, SPRD_BAUD_IO_LIMIT); + + quot = (unsigned int)((port->uartclk + baud / 2) / baud); + + /* set data length */ + switch (termios->c_cflag & CSIZE) { + case CS5: + lcr |= SPRD_LCR_DATA_LEN5; + break; + case CS6: + lcr |= SPRD_LCR_DATA_LEN6; + break; + case CS7: + lcr |= SPRD_LCR_DATA_LEN7; + break; + case CS8: + default: + lcr |= SPRD_LCR_DATA_LEN8; + break; + } + + /* calculate stop bits */ + lcr &= ~(SPRD_LCR_STOP_1BIT | SPRD_LCR_STOP_2BIT); + if (termios->c_cflag & CSTOPB) + lcr |= SPRD_LCR_STOP_2BIT; + else + lcr |= SPRD_LCR_STOP_1BIT; + + /* calculate parity */ + lcr &= ~SPRD_LCR_PARITY; + termios->c_cflag &= ~CMSPAR; /* no support mark/space */ + if (termios->c_cflag & PARENB) { + lcr |= SPRD_LCR_PARITY_EN; + if (termios->c_cflag & PARODD) + lcr |= SPRD_LCR_ODD_PAR; + else + lcr |= SPRD_LCR_EVEN_PAR; + } + + spin_lock_irqsave(&port->lock, flags); + + /* update the per-port timeout */ + uart_update_timeout(port, termios->c_cflag, baud); + + port->read_status_mask = SPRD_LSR_OE; + if (termios->c_iflag & INPCK) + port->read_status_mask |= SPRD_LSR_FE | SPRD_LSR_PE; + if (termios->c_iflag & (IGNBRK | BRKINT | PARMRK)) + port->read_status_mask |= SPRD_LSR_BI; + + /* characters to ignore */ + port->ignore_status_mask = 0; + if (termios->c_iflag & IGNPAR) + port->ignore_status_mask |= SPRD_LSR_PE | SPRD_LSR_FE; + if (termios->c_iflag & IGNBRK) { + port->ignore_status_mask |= SPRD_LSR_BI; + /* + * If we're ignoring parity and break indicators, + * ignore overruns too (for real raw support). + */ + if (termios->c_iflag & IGNPAR) + port->ignore_status_mask |= SPRD_LSR_OE; + } + + /* flow control */ + fc = serial_in(port, SPRD_CTL1); + fc &= ~(RX_HW_FLOW_CTL_THLD | RX_HW_FLOW_CTL_EN | TX_HW_FLOW_CTL_EN); + if (termios->c_cflag & CRTSCTS) { + fc |= RX_HW_FLOW_CTL_THLD; + fc |= RX_HW_FLOW_CTL_EN; + fc |= TX_HW_FLOW_CTL_EN; + } + + /* clock divider bit0~bit15 */ + serial_out(port, SPRD_CLKD0, quot & 0xffff); + + /* clock divider bit16~bit20 */ + serial_out(port, SPRD_CLKD1, (quot & 0x1f0000) >> 16); + serial_out(port, SPRD_LCR, lcr); + fc |= RX_TOUT_THLD_DEF | RX_HFC_THLD_DEF; + serial_out(port, SPRD_CTL1, fc); + + spin_unlock_irqrestore(&port->lock, flags); + + /* Don't rewrite B0 */ + if (tty_termios_baud_rate(termios)) + tty_termios_encode_baud_rate(termios, baud, baud); +} + +static const char *sprd_type(struct uart_port *port) +{ + return "SPX"; +} + +static void sprd_release_port(struct uart_port *port) +{ + /* nothing to do */ +} + +static int sprd_request_port(struct uart_port *port) +{ + return 0; +} + +static void sprd_config_port(struct uart_port *port, int flags) +{ + if (flags & UART_CONFIG_TYPE) + port->type = PORT_SPRD; +} + +static int sprd_verify_port(struct uart_port *port, + struct serial_struct *ser) +{ + if (ser->type != PORT_SPRD) + return -EINVAL; + if (port->irq != ser->irq) + return -EINVAL; + return 0; +} + +static struct uart_ops serial_sprd_ops = { + .tx_empty = sprd_tx_empty, + .get_mctrl = sprd_get_mctrl, + .set_mctrl = sprd_set_mctrl, + .stop_tx = sprd_stop_tx, + .start_tx = sprd_start_tx, + .stop_rx = sprd_stop_rx, + .break_ctl = sprd_break_ctl, + .startup = sprd_startup, + .shutdown = sprd_shutdown, + .set_termios = sprd_set_termios, + .type = sprd_type, + .release_port = sprd_release_port, + .request_port = sprd_request_port, + .config_port = sprd_config_port, + .verify_port = sprd_verify_port, +}; + +#ifdef CONFIG_SERIAL_SPRD_CONSOLE +static inline void wait_for_xmitr(struct uart_port *port) +{ + unsigned int status, tmout = 10000; + + /* wait up to 10ms for the character(s) to be sent */ + do { + status = serial_in(port, SPRD_STS1); + if (--tmout == 0) + break; + udelay(1); + } while (status & 0xff00); +} + +static void sprd_console_putchar(struct uart_port *port, int ch) +{ + wait_for_xmitr(port); + serial_out(port, SPRD_TXD, ch); +} + +static void sprd_console_write(struct console *co, const char *s, + unsigned int count) +{ + struct uart_port *port = &sprd_port[co->index]->port; + int locked = 1; + unsigned long flags; + + if (port->sysrq) + locked = 0; + else if (oops_in_progress) + locked = spin_trylock_irqsave(&port->lock, flags); + else + spin_lock_irqsave(&port->lock, flags); + + uart_console_write(port, s, count, sprd_console_putchar); + + /* wait for transmitter to become empty */ + wait_for_xmitr(port); + + if (locked) + spin_unlock_irqrestore(&port->lock, flags); +} + +static int __init sprd_console_setup(struct console *co, char *options) +{ + struct uart_port *port; + int baud = 115200; + int bits = 8; + int parity = 'n'; + int flow = 'n'; + + if (co->index >= UART_NR_MAX || co->index < 0) + co->index = 0; + + port = &sprd_port[co->index]->port; + if (port == NULL) { + pr_info("serial port %d not yet initialized\n", co->index); + return -ENODEV; + } + if (options) + uart_parse_options(options, &baud, &parity, &bits, &flow); + + return uart_set_options(port, co, baud, parity, bits, flow); +} + +static struct uart_driver sprd_uart_driver; +static struct console sprd_console = { + .name = SPRD_TTY_NAME, + .write = sprd_console_write, + .device = uart_console_device, + .setup = sprd_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, + .data = &sprd_uart_driver, +}; + +#define SPRD_CONSOLE (&sprd_console) + +/* Support for earlycon */ +static void sprd_putc(struct uart_port *port, int c) +{ + unsigned int timeout = SPRD_TIMEOUT; + + while (timeout-- && + !(readl(port->membase + SPRD_LSR) & SPRD_LSR_TX_OVER)) + cpu_relax(); + + writeb(c, port->membase + SPRD_TXD); +} + +static void sprd_early_write(struct console *con, const char *s, + unsigned n) +{ + struct earlycon_device *dev = con->data; + + uart_console_write(&dev->port, s, n, sprd_putc); +} + +static int __init sprd_early_console_setup( + struct earlycon_device *device, + const char *opt) +{ + if (!device->port.membase) + return -ENODEV; + + device->con->write = sprd_early_write; + return 0; +} + +EARLYCON_DECLARE(sprd_serial, sprd_early_console_setup); +OF_EARLYCON_DECLARE(sprd_serial, "sprd,sc9836-uart", + sprd_early_console_setup); + +#else /* !CONFIG_SERIAL_SPRD_CONSOLE */ +#define SPRD_CONSOLE NULL +#endif + +static struct uart_driver sprd_uart_driver = { + .owner = THIS_MODULE, + .driver_name = "sprd_serial", + .dev_name = SPRD_TTY_NAME, + .major = 0, + .minor = 0, + .nr = UART_NR_MAX, + .cons = SPRD_CONSOLE, +}; + +static int sprd_probe_dt_alias(int index, struct device *dev) +{ + struct device_node *np; + int ret = index; + + if (!IS_ENABLED(CONFIG_OF)) + return ret; + + np = dev->of_node; + if (!np) + return ret; + + ret = of_alias_get_id(np, "serial"); + if (IS_ERR_VALUE(ret)) + ret = index; + else if (ret >= ARRAY_SIZE(sprd_port) || sprd_port[ret] != NULL) { + dev_warn(dev, "requested serial port %d not available.\n", ret); + ret = index; + } + + return ret; +} + +static int sprd_remove(struct platform_device *dev) +{ + struct sprd_uart_port *sup = platform_get_drvdata(dev); + + if (sup) { + uart_remove_one_port(&sprd_uart_driver, &sup->port); + sprd_port[sup->port.line] = NULL; + sprd_ports_num--; + } + + if (!sprd_ports_num) + uart_unregister_driver(&sprd_uart_driver); + + return 0; +} + +static int sprd_probe(struct platform_device *pdev) +{ + struct resource *res; + struct uart_port *up; + struct clk *clk; + int irq; + int index; + int ret; + + for (index = 0; index < ARRAY_SIZE(sprd_port); index++) + if (sprd_port[index] == NULL) + break; + + if (index == ARRAY_SIZE(sprd_port)) + return -EBUSY; + + index = sprd_probe_dt_alias(index, &pdev->dev); + + sprd_port[index] = devm_kzalloc(&pdev->dev, + sizeof(*sprd_port[index]), GFP_KERNEL); + if (!sprd_port[index]) + return -ENOMEM; + + up = &sprd_port[index]->port; + up->dev = &pdev->dev; + up->line = index; + up->type = PORT_SPRD; + up->iotype = SERIAL_IO_PORT; + up->uartclk = SPRD_DEF_RATE; + up->fifosize = SPRD_FIFO_SIZE; + up->ops = &serial_sprd_ops; + up->flags = UPF_BOOT_AUTOCONF; + + clk = devm_clk_get(&pdev->dev, NULL); + if (!IS_ERR(clk)) + up->uartclk = clk_get_rate(clk); + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + dev_err(&pdev->dev, "not provide mem resource\n"); + return -ENODEV; + } + up->mapbase = res->start; + up->membase = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(up->membase)) + return PTR_ERR(up->membase); + + irq = platform_get_irq(pdev, 0); + if (irq < 0) { + dev_err(&pdev->dev, "not provide irq resource\n"); + return -ENODEV; + } + up->irq = irq; + + if (!sprd_ports_num) { + ret = uart_register_driver(&sprd_uart_driver); + if (ret < 0) { + pr_err("Failed to register SPRD-UART driver\n"); + return ret; + } + } + sprd_ports_num++; + + ret = uart_add_one_port(&sprd_uart_driver, up); + if (ret) { + sprd_port[index] = NULL; + sprd_remove(pdev); + } + + platform_set_drvdata(pdev, up); + + return ret; +} + +static int sprd_suspend(struct device *dev) +{ + struct sprd_uart_port *sup = dev_get_drvdata(dev); + + uart_suspend_port(&sprd_uart_driver, &sup->port); + + return 0; +} + +static int sprd_resume(struct device *dev) +{ + struct sprd_uart_port *sup = dev_get_drvdata(dev); + + uart_resume_port(&sprd_uart_driver, &sup->port); + + return 0; +} + +static SIMPLE_DEV_PM_OPS(sprd_pm_ops, sprd_suspend, sprd_resume); + +static const struct of_device_id serial_ids[] = { + {.compatible = "sprd,sc9836-uart",}, + {} +}; + +static struct platform_driver sprd_platform_driver = { + .probe = sprd_probe, + .remove = sprd_remove, + .driver = { + .name = "sprd_serial", + .of_match_table = of_match_ptr(serial_ids), + .pm = &sprd_pm_ops, + }, +}; + +module_platform_driver(sprd_platform_driver); + +MODULE_LICENSE("GPL v2"); +MODULE_DESCRIPTION("Spreadtrum SoC serial driver series"); diff --git a/drivers/tty/serial/xilinx_uartps.c b/drivers/tty/serial/xilinx_uartps.c index 542bab37e502..cff531a51a78 100644 --- a/drivers/tty/serial/xilinx_uartps.c +++ b/drivers/tty/serial/xilinx_uartps.c @@ -637,10 +637,12 @@ static void cdns_uart_set_termios(struct uart_port *port, spin_lock_irqsave(&port->lock, flags); - /* Empty the receive FIFO 1st before making changes */ - while ((cdns_uart_readl(CDNS_UART_SR_OFFSET) & - CDNS_UART_SR_RXEMPTY) != CDNS_UART_SR_RXEMPTY) { - cdns_uart_readl(CDNS_UART_FIFO_OFFSET); + /* Wait for the transmit FIFO to empty before making changes */ + if (!(cdns_uart_readl(CDNS_UART_CR_OFFSET) & CDNS_UART_CR_TX_DIS)) { + while (!(cdns_uart_readl(CDNS_UART_SR_OFFSET) & + CDNS_UART_SR_TXEMPTY)) { + cpu_relax(); + } } /* Disable the TX and RX to set baud rate */ diff --git a/drivers/tty/tty_buffer.c b/drivers/tty/tty_buffer.c index 3605103fc1ac..75661641f5fe 100644 --- a/drivers/tty/tty_buffer.c +++ b/drivers/tty/tty_buffer.c @@ -557,3 +557,9 @@ int tty_buffer_set_limit(struct tty_port *port, int limit) return 0; } EXPORT_SYMBOL_GPL(tty_buffer_set_limit); + +/* slave ptys can claim nested buffer lock when handling BRK and INTR */ +void tty_buffer_set_lock_subclass(struct tty_port *port) +{ + lockdep_set_subclass(&port->buf.lock, TTY_LOCK_SLAVE); +} diff --git a/drivers/tty/tty_ioctl.c b/drivers/tty/tty_ioctl.c index 1787fa4d9448..a5cf253b2544 100644 --- a/drivers/tty/tty_ioctl.c +++ b/drivers/tty/tty_ioctl.c @@ -530,7 +530,7 @@ EXPORT_SYMBOL(tty_termios_hw_change); * Locking: termios_rwsem */ -int tty_set_termios(struct tty_struct *tty, struct ktermios *new_termios) +static int tty_set_termios(struct tty_struct *tty, struct ktermios *new_termios) { struct ktermios old_termios; struct tty_ldisc *ld; @@ -563,7 +563,6 @@ int tty_set_termios(struct tty_struct *tty, struct ktermios *new_termios) up_write(&tty->termios_rwsem); return 0; } -EXPORT_SYMBOL_GPL(tty_set_termios); /** * set_termios - set termios values for a tty diff --git a/drivers/tty/tty_mutex.c b/drivers/tty/tty_mutex.c index 4486741190c4..0efcf713b756 100644 --- a/drivers/tty/tty_mutex.c +++ b/drivers/tty/tty_mutex.c @@ -4,18 +4,8 @@ #include <linux/semaphore.h> #include <linux/sched.h> -/* - * Nested tty locks are necessary for releasing pty pairs. - * The stable lock order is master pty first, then slave pty. - */ - /* Legacy tty mutex glue */ -enum { - TTY_MUTEX_NORMAL, - TTY_MUTEX_SLAVE, -}; - /* * Getting the big tty mutex. */ @@ -46,12 +36,8 @@ EXPORT_SYMBOL(tty_unlock); void __lockfunc tty_lock_slave(struct tty_struct *tty) { - if (tty && tty != tty->link) { - WARN_ON(!mutex_is_locked(&tty->link->legacy_mutex) || - !tty->driver->type == TTY_DRIVER_TYPE_PTY || - !tty->driver->type == PTY_TYPE_SLAVE); + if (tty && tty != tty->link) tty_lock(tty); - } } void __lockfunc tty_unlock_slave(struct tty_struct *tty) @@ -62,5 +48,5 @@ void __lockfunc tty_unlock_slave(struct tty_struct *tty) void tty_set_lock_subclass(struct tty_struct *tty) { - lockdep_set_subclass(&tty->legacy_mutex, TTY_MUTEX_SLAVE); + lockdep_set_subclass(&tty->legacy_mutex, TTY_LOCK_SLAVE); } diff --git a/drivers/tty/vt/vt.c b/drivers/tty/vt/vt.c index f3fbbbca9bde..6e00572cbeb9 100644 --- a/drivers/tty/vt/vt.c +++ b/drivers/tty/vt/vt.c @@ -500,6 +500,7 @@ void invert_screen(struct vc_data *vc, int offset, int count, int viewed) #endif if (DO_UPDATE(vc)) do_update_region(vc, (unsigned long) p, count); + notify_update(vc); } /* used by selection: complement pointer position */ @@ -516,6 +517,7 @@ void complement_pos(struct vc_data *vc, int offset) scr_writew(old, screenpos(vc, old_offset, 1)); if (DO_UPDATE(vc)) vc->vc_sw->con_putc(vc, old, oldy, oldx); + notify_update(vc); } old_offset = offset; @@ -533,8 +535,8 @@ void complement_pos(struct vc_data *vc, int offset) oldy = (offset >> 1) / vc->vc_cols; vc->vc_sw->con_putc(vc, new, oldy, oldx); } + notify_update(vc); } - } static void insert_char(struct vc_data *vc, unsigned int nr) @@ -3318,11 +3320,8 @@ static int vt_bind(struct con_driver *con) if (first == 0 && last == MAX_NR_CONSOLES -1) deflt = 1; - if (first != -1) { - console_lock(); + if (first != -1) do_bind_con_driver(csw, first, last, deflt); - console_unlock(); - } first = -1; last = -1; @@ -3362,9 +3361,7 @@ static int vt_unbind(struct con_driver *con) deflt = 1; if (first != -1) { - console_lock(); ret = do_unbind_con_driver(csw, first, last, deflt); - console_unlock(); if (ret != 0) return ret; } @@ -3394,11 +3391,15 @@ static ssize_t store_bind(struct device *dev, struct device_attribute *attr, struct con_driver *con = dev_get_drvdata(dev); int bind = simple_strtoul(buf, NULL, 0); + console_lock(); + if (bind) vt_bind(con); else vt_unbind(con); + console_unlock(); + return count; } @@ -3665,8 +3666,7 @@ int do_unregister_con_driver(const struct consw *csw) for (i = 0; i < MAX_NR_CON_DRIVER; i++) { struct con_driver *con_driver = ®istered_con_driver[i]; - if (con_driver->con == csw && - con_driver->flag & CON_DRIVER_FLAG_INIT) { + if (con_driver->con == csw) { vtconsole_deinit_device(con_driver); device_destroy(vtconsole_class, MKDEV(0, con_driver->node)); |