summaryrefslogtreecommitdiff
path: root/drivers
diff options
context:
space:
mode:
Diffstat (limited to 'drivers')
-rw-r--r--drivers/amba/bus.c32
-rw-r--r--drivers/mmc/host/mmci.c66
-rw-r--r--drivers/mmc/host/mmci.h4
-rw-r--r--drivers/tty/serial/atmel_serial.c18
-rw-r--r--drivers/tty/serial/sa1100.c2
-rw-r--r--drivers/usb/gadget/pxa25x_udc.c4
-rw-r--r--drivers/watchdog/sp805_wdt.c6
7 files changed, 81 insertions, 51 deletions
diff --git a/drivers/amba/bus.c b/drivers/amba/bus.c
index e8eb91bd0d28..a2fc56d2e681 100644
--- a/drivers/amba/bus.c
+++ b/drivers/amba/bus.c
@@ -546,7 +546,8 @@ EXPORT_SYMBOL_GPL(amba_device_add);
static struct amba_device *
amba_aphb_device_add(struct device *parent, const char *name,
resource_size_t base, size_t size, int irq1, int irq2,
- void *pdata, unsigned int periphid, u64 dma_mask)
+ void *pdata, unsigned int periphid, u64 dma_mask,
+ struct resource *resbase)
{
struct amba_device *dev;
int ret;
@@ -563,7 +564,7 @@ amba_aphb_device_add(struct device *parent, const char *name,
dev->dev.platform_data = pdata;
dev->dev.parent = parent;
- ret = amba_device_add(dev, &iomem_resource);
+ ret = amba_device_add(dev, resbase);
if (ret) {
amba_device_put(dev);
return ERR_PTR(ret);
@@ -578,7 +579,7 @@ amba_apb_device_add(struct device *parent, const char *name,
void *pdata, unsigned int periphid)
{
return amba_aphb_device_add(parent, name, base, size, irq1, irq2, pdata,
- periphid, 0);
+ periphid, 0, &iomem_resource);
}
EXPORT_SYMBOL_GPL(amba_apb_device_add);
@@ -588,10 +589,33 @@ amba_ahb_device_add(struct device *parent, const char *name,
void *pdata, unsigned int periphid)
{
return amba_aphb_device_add(parent, name, base, size, irq1, irq2, pdata,
- periphid, ~0ULL);
+ periphid, ~0ULL, &iomem_resource);
}
EXPORT_SYMBOL_GPL(amba_ahb_device_add);
+struct amba_device *
+amba_apb_device_add_res(struct device *parent, const char *name,
+ resource_size_t base, size_t size, int irq1,
+ int irq2, void *pdata, unsigned int periphid,
+ struct resource *resbase)
+{
+ return amba_aphb_device_add(parent, name, base, size, irq1, irq2, pdata,
+ periphid, 0, resbase);
+}
+EXPORT_SYMBOL_GPL(amba_apb_device_add_res);
+
+struct amba_device *
+amba_ahb_device_add_res(struct device *parent, const char *name,
+ resource_size_t base, size_t size, int irq1,
+ int irq2, void *pdata, unsigned int periphid,
+ struct resource *resbase)
+{
+ return amba_aphb_device_add(parent, name, base, size, irq1, irq2, pdata,
+ periphid, ~0ULL, resbase);
+}
+EXPORT_SYMBOL_GPL(amba_ahb_device_add_res);
+
+
static void amba_device_initialize(struct amba_device *dev, const char *name)
{
device_initialize(&dev->dev);
diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c
index ec28d175d9c8..150772395cc6 100644
--- a/drivers/mmc/host/mmci.c
+++ b/drivers/mmc/host/mmci.c
@@ -33,6 +33,7 @@
#include <linux/amba/mmci.h>
#include <linux/pm_runtime.h>
#include <linux/types.h>
+#include <linux/pinctrl/consumer.h>
#include <asm/div64.h>
#include <asm/io.h>
@@ -654,9 +655,31 @@ static void mmci_start_data(struct mmci_host *host, struct mmc_data *data)
/* The ST Micro variants has a special bit to enable SDIO */
if (variant->sdio && host->mmc->card)
- if (mmc_card_sdio(host->mmc->card))
+ if (mmc_card_sdio(host->mmc->card)) {
+ /*
+ * The ST Micro variants has a special bit
+ * to enable SDIO.
+ */
+ u32 clk;
+
datactrl |= MCI_ST_DPSM_SDIOEN;
+ /*
+ * The ST Micro variant for SDIO small write transfers
+ * needs to have clock H/W flow control disabled,
+ * otherwise the transfer will not start. The threshold
+ * depends on the rate of MCLK.
+ */
+ if (data->flags & MMC_DATA_WRITE &&
+ (host->size < 8 ||
+ (host->size <= 8 && host->mclk > 50000000)))
+ clk = host->clk_reg & ~variant->clkreg_enable;
+ else
+ clk = host->clk_reg | variant->clkreg_enable;
+
+ mmci_write_clkreg(host, clk);
+ }
+
/*
* Attempt to use DMA operation mode, if this
* should fail, fall back to PIO mode
@@ -840,14 +863,14 @@ static int mmci_pio_read(struct mmci_host *host, char *buffer, unsigned int rema
if (unlikely(count & 0x3)) {
if (count < 4) {
unsigned char buf[4];
- readsl(base + MMCIFIFO, buf, 1);
+ ioread32_rep(base + MMCIFIFO, buf, 1);
memcpy(ptr, buf, count);
} else {
- readsl(base + MMCIFIFO, ptr, count >> 2);
+ ioread32_rep(base + MMCIFIFO, ptr, count >> 2);
count &= ~0x3;
}
} else {
- readsl(base + MMCIFIFO, ptr, count >> 2);
+ ioread32_rep(base + MMCIFIFO, ptr, count >> 2);
}
ptr += count;
@@ -877,22 +900,6 @@ static int mmci_pio_write(struct mmci_host *host, char *buffer, unsigned int rem
count = min(remain, maxcnt);
/*
- * The ST Micro variant for SDIO transfer sizes
- * less then 8 bytes should have clock H/W flow
- * control disabled.
- */
- if (variant->sdio &&
- mmc_card_sdio(host->mmc->card)) {
- u32 clk;
- if (count < 8)
- clk = host->clk_reg & ~variant->clkreg_enable;
- else
- clk = host->clk_reg | variant->clkreg_enable;
-
- mmci_write_clkreg(host, clk);
- }
-
- /*
* SDIO especially may want to send something that is
* not divisible by 4 (as opposed to card sectors
* etc), and the FIFO only accept full 32-bit writes.
@@ -900,7 +907,7 @@ static int mmci_pio_write(struct mmci_host *host, char *buffer, unsigned int rem
* byte become a 32bit write, 7 bytes will be two
* 32bit writes etc.
*/
- writesl(base + MMCIFIFO, ptr, (count + 3) >> 2);
+ iowrite32_rep(base + MMCIFIFO, ptr, (count + 3) >> 2);
ptr += count;
remain -= count;
@@ -1360,6 +1367,23 @@ static int mmci_probe(struct amba_device *dev,
mmc->f_max = min(host->mclk, fmax);
dev_dbg(mmc_dev(mmc), "clocking block at %u Hz\n", mmc->f_max);
+ host->pinctrl = devm_pinctrl_get(&dev->dev);
+ if (IS_ERR(host->pinctrl)) {
+ ret = PTR_ERR(host->pinctrl);
+ goto clk_disable;
+ }
+
+ host->pins_default = pinctrl_lookup_state(host->pinctrl,
+ PINCTRL_STATE_DEFAULT);
+
+ /* enable pins to be muxed in and configured */
+ if (!IS_ERR(host->pins_default)) {
+ ret = pinctrl_select_state(host->pinctrl, host->pins_default);
+ if (ret)
+ dev_warn(&dev->dev, "could not set default pins\n");
+ } else
+ dev_warn(&dev->dev, "could not get default pinstate\n");
+
#ifdef CONFIG_REGULATOR
/* If we're using the regulator framework, try to fetch a regulator */
host->vcc = regulator_get(&dev->dev, "vmmc");
diff --git a/drivers/mmc/host/mmci.h b/drivers/mmc/host/mmci.h
index d437ccf62d6b..d34d8c0add8e 100644
--- a/drivers/mmc/host/mmci.h
+++ b/drivers/mmc/host/mmci.h
@@ -195,6 +195,10 @@ struct mmci_host {
unsigned int size;
struct regulator *vcc;
+ /* pinctrl handles */
+ struct pinctrl *pinctrl;
+ struct pinctrl_state *pins_default;
+
#ifdef CONFIG_DMA_ENGINE
/* DMA stuff */
struct dma_chan *dma_current;
diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c
index b95886c1198d..1a8a2713dd95 100644
--- a/drivers/tty/serial/atmel_serial.c
+++ b/drivers/tty/serial/atmel_serial.c
@@ -44,7 +44,6 @@
#include <asm/io.h>
#include <asm/ioctls.h>
-#include <asm/mach/serial_at91.h>
#include <mach/board.h>
#ifdef CONFIG_ARM
@@ -1514,23 +1513,6 @@ static void atmel_init_port(struct atmel_uart_port *atmel_port,
}
}
-/*
- * Register board-specific modem-control line handlers.
- */
-void __init atmel_register_uart_fns(struct atmel_port_fns *fns)
-{
- if (fns->enable_ms)
- atmel_pops.enable_ms = fns->enable_ms;
- if (fns->get_mctrl)
- atmel_pops.get_mctrl = fns->get_mctrl;
- if (fns->set_mctrl)
- atmel_pops.set_mctrl = fns->set_mctrl;
- atmel_open_hook = fns->open;
- atmel_close_hook = fns->close;
- atmel_pops.pm = fns->pm;
- atmel_pops.set_wake = fns->set_wake;
-}
-
struct platform_device *atmel_default_console_device; /* the serial console device */
#ifdef CONFIG_SERIAL_ATMEL_CONSOLE
diff --git a/drivers/tty/serial/sa1100.c b/drivers/tty/serial/sa1100.c
index da56c8a0fdc9..5d4b9b449b4a 100644
--- a/drivers/tty/serial/sa1100.c
+++ b/drivers/tty/serial/sa1100.c
@@ -29,6 +29,7 @@
#include <linux/init.h>
#include <linux/console.h>
#include <linux/sysrq.h>
+#include <linux/platform_data/sa11x0-serial.h>
#include <linux/platform_device.h>
#include <linux/tty.h>
#include <linux/tty_flip.h>
@@ -39,7 +40,6 @@
#include <asm/irq.h>
#include <mach/hardware.h>
#include <mach/irqs.h>
-#include <asm/mach/serial_sa1100.h>
/* We've been assigned a range on the "Low-density serial ports" major */
#define SERIAL_SA1100_MAJOR 204
diff --git a/drivers/usb/gadget/pxa25x_udc.c b/drivers/usb/gadget/pxa25x_udc.c
index 8efbf08c3561..d4ca9f1f7f24 100644
--- a/drivers/usb/gadget/pxa25x_udc.c
+++ b/drivers/usb/gadget/pxa25x_udc.c
@@ -29,6 +29,7 @@
#include <linux/list.h>
#include <linux/interrupt.h>
#include <linux/mm.h>
+#include <linux/platform_data/pxa2xx_udc.h>
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
#include <linux/irq.h>
@@ -59,9 +60,6 @@
#include <mach/lubbock.h>
#endif
-#include <asm/mach/udc_pxa2xx.h>
-
-
/*
* This driver handles the USB Device Controller (UDC) in Intel's PXA 25x
* series processors. The UDC for the IXP 4xx series is very similar.
diff --git a/drivers/watchdog/sp805_wdt.c b/drivers/watchdog/sp805_wdt.c
index 4552847fc7fe..76c73cbf0040 100644
--- a/drivers/watchdog/sp805_wdt.c
+++ b/drivers/watchdog/sp805_wdt.c
@@ -284,8 +284,7 @@ static int sp805_wdt_remove(struct amba_device *adev)
return 0;
}
-#ifdef CONFIG_PM
-static int sp805_wdt_suspend(struct device *dev)
+static int __maybe_unused sp805_wdt_suspend(struct device *dev)
{
struct sp805_wdt *wdt = dev_get_drvdata(dev);
@@ -295,7 +294,7 @@ static int sp805_wdt_suspend(struct device *dev)
return 0;
}
-static int sp805_wdt_resume(struct device *dev)
+static int __maybe_unused sp805_wdt_resume(struct device *dev)
{
struct sp805_wdt *wdt = dev_get_drvdata(dev);
@@ -304,7 +303,6 @@ static int sp805_wdt_resume(struct device *dev)
return 0;
}
-#endif /* CONFIG_PM */
static SIMPLE_DEV_PM_OPS(sp805_wdt_dev_pm_ops, sp805_wdt_suspend,
sp805_wdt_resume);
generated by cgit v1.2.3 (git 2.0.4) at 2024-11-17 03:08:08 +0000