199 files changed, 3726 insertions, 1304 deletions

diff --git a/drivers/bluetooth/hci_ath.c b/drivers/bluetooth/hci_ath.c
index 6a160c17ea94..bd34406faaae 100644
--- a/drivers/bluetooth/hci_ath.c
+++ b/drivers/bluetooth/hci_ath.c
@@ -51,32 +51,32 @@ struct ath_struct {
 
 static int ath_wakeup_ar3k(struct tty_struct *tty)
 {
-	struct termios settings;
-	int status = tty->driver->ops->tiocmget(tty, NULL);
+	struct ktermios ktermios;
+	int status = tty->driver->ops->tiocmget(tty);
 
 	if (status & TIOCM_CTS)
 		return status;
 
 	/* Disable Automatic RTSCTS */
-	n_tty_ioctl_helper(tty, NULL, TCGETS, (unsigned long)&settings);
-	settings.c_cflag &= ~CRTSCTS;
-	n_tty_ioctl_helper(tty, NULL, TCSETS, (unsigned long)&settings);
+	memcpy(&ktermios, tty->termios, sizeof(ktermios));
+	ktermios.c_cflag &= ~CRTSCTS;
+	tty_set_termios(tty, &ktermios);
 
 	/* Clear RTS first */
-	status = tty->driver->ops->tiocmget(tty, NULL);
-	tty->driver->ops->tiocmset(tty, NULL, 0x00, TIOCM_RTS);
+	status = tty->driver->ops->tiocmget(tty);
+	tty->driver->ops->tiocmset(tty, 0x00, TIOCM_RTS);
 	mdelay(20);
 
 	/* Set RTS, wake up board */
-	status = tty->driver->ops->tiocmget(tty, NULL);
-	tty->driver->ops->tiocmset(tty, NULL, TIOCM_RTS, 0x00);
+	status = tty->driver->ops->tiocmget(tty);
+	tty->driver->ops->tiocmset(tty, TIOCM_RTS, 0x00);
 	mdelay(20);
 
-	status = tty->driver->ops->tiocmget(tty, NULL);
+	status = tty->driver->ops->tiocmget(tty);
 
-	n_tty_ioctl_helper(tty, NULL, TCGETS, (unsigned long)&settings);
-	settings.c_cflag |= CRTSCTS;
-	n_tty_ioctl_helper(tty, NULL, TCSETS, (unsigned long)&settings);
+	/* Disable Automatic RTSCTS */
+	ktermios.c_cflag |= CRTSCTS;
+	status = tty_set_termios(tty, &ktermios);
 
 	return status;
 }
diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig
index b7980a83ce2d..04f8b2d083c6 100644
--- a/drivers/char/Kconfig
+++ b/drivers/char/Kconfig
@@ -4,89 +4,7 @@
 
 menu "Character devices"
 
-config VT
-	bool "Virtual terminal" if EXPERT
-	depends on !S390
-	select INPUT
-	default y
-	---help---
-	  If you say Y here, you will get support for terminal devices with
-	  display and keyboard devices. These are called "virtual" because you
-	  can run several virtual terminals (also called virtual consoles) on
-	  one physical terminal. This is rather useful, for example one
-	  virtual terminal can collect system messages and warnings, another
-	  one can be used for a text-mode user session, and a third could run
-	  an X session, all in parallel. Switching between virtual terminals
-	  is done with certain key combinations, usually Alt-<function key>.
-
-	  The setterm command ("man setterm") can be used to change the
-	  properties (such as colors or beeping) of a virtual terminal. The
-	  man page console_codes(4) ("man console_codes") contains the special
-	  character sequences that can be used to change those properties
-	  directly. The fonts used on virtual terminals can be changed with
-	  the setfont ("man setfont") command and the key bindings are defined
-	  with the loadkeys ("man loadkeys") command.
-
-	  You need at least one virtual terminal device in order to make use
-	  of your keyboard and monitor. Therefore, only people configuring an
-	  embedded system would want to say N here in order to save some
-	  memory; the only way to log into such a system is then via a serial
-	  or network connection.
-
-	  If unsure, say Y, or else you won't be able to do much with your new
-	  shiny Linux system :-)
-
-config CONSOLE_TRANSLATIONS
-	depends on VT
-	default y
-	bool "Enable character translations in console" if EXPERT
-	---help---
-	  This enables support for font mapping and Unicode translation
-	  on virtual consoles.
-
-config VT_CONSOLE
-	bool "Support for console on virtual terminal" if EXPERT
-	depends on VT
-	default y
-	---help---
-	  The system console is the device which receives all kernel messages
-	  and warnings and which allows logins in single user mode. If you
-	  answer Y here, a virtual terminal (the device used to interact with
-	  a physical terminal) can be used as system console. This is the most
-	  common mode of operations, so you should say Y here unless you want
-	  the kernel messages be output only to a serial port (in which case
-	  you should say Y to "Console on serial port", below).
-
-	  If you do say Y here, by default the currently visible virtual
-	  terminal (/dev/tty0) will be used as system console. You can change
-	  that with a kernel command line option such as "console=tty3" which
-	  would use the third virtual terminal as system console. (Try "man
-	  bootparam" or see the documentation of your boot loader (lilo or
-	  loadlin) about how to pass options to the kernel at boot time.)
-
-	  If unsure, say Y.
-
-config HW_CONSOLE
-	bool
-	depends on VT && !S390 && !UML
-	default y
-
-config VT_HW_CONSOLE_BINDING
-       bool "Support for binding and unbinding console drivers"
-       depends on HW_CONSOLE
-       default n
-       ---help---
-         The virtual terminal is the device that interacts with the physical
-         terminal through console drivers. On these systems, at least one
-         console driver is loaded. In other configurations, additional console
-         drivers may be enabled, such as the framebuffer console. If more than
-         1 console driver is enabled, setting this to 'y' will allow you to
-         select the console driver that will serve as the backend for the
-         virtual terminals.
-
-	 See <file:Documentation/console/console.txt> for more
-	 information. For framebuffer console users, please refer to
-	 <file:Documentation/fb/fbcon.txt>.
+source "drivers/tty/Kconfig"
 
 config DEVKMEM
 	bool "/dev/kmem virtual device support"
@@ -97,253 +15,6 @@ config DEVKMEM
 	  kind of kernel debugging operations.
 	  When in doubt, say "N".
 
-config BFIN_JTAG_COMM
-	tristate "Blackfin JTAG Communication"
-	depends on BLACKFIN
-	help
-	  Add support for emulating a TTY device over the Blackfin JTAG.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called bfin_jtag_comm.
-
-config BFIN_JTAG_COMM_CONSOLE
-	bool "Console on Blackfin JTAG"
-	depends on BFIN_JTAG_COMM=y
-
-config SERIAL_NONSTANDARD
-	bool "Non-standard serial port support"
-	depends on HAS_IOMEM
-	---help---
-	  Say Y here if you have any non-standard serial boards -- boards
-	  which aren't supported using the standard "dumb" serial driver.
-	  This includes intelligent serial boards such as Cyclades,
-	  Digiboards, etc. These are usually used for systems that need many
-	  serial ports because they serve many terminals or dial-in
-	  connections.
-
-	  Note that the answer to this question won't directly affect the
-	  kernel: saying N will just cause the configurator to skip all
-	  the questions about non-standard serial boards.
-
-	  Most people can say N here.
-
-config COMPUTONE
-	tristate "Computone IntelliPort Plus serial support"
-	depends on SERIAL_NONSTANDARD && (ISA || EISA || PCI)
-	---help---
-	  This driver supports the entire family of Intelliport II/Plus
-	  controllers with the exception of the MicroChannel controllers and
-	  products previous to the Intelliport II. These are multiport cards,
-	  which give you many serial ports. You would need something like this
-	  to connect more than two modems to your Linux box, for instance in
-	  order to become a dial-in server. If you have a card like that, say
-	  Y here and read <file:Documentation/serial/computone.txt>.
-
-	  To compile this driver as module, choose M here: the
-	  module will be called ip2.
-
-config ROCKETPORT
-	tristate "Comtrol RocketPort support"
-	depends on SERIAL_NONSTANDARD && (ISA || EISA || PCI)
-	help
-	  This driver supports Comtrol RocketPort and RocketModem PCI boards.   
-          These boards provide 2, 4, 8, 16, or 32 high-speed serial ports or
-          modems.  For information about the RocketPort/RocketModem  boards
-          and this driver read <file:Documentation/serial/rocket.txt>.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called rocket.
-
-	  If you want to compile this driver into the kernel, say Y here.  If
-          you don't have a Comtrol RocketPort/RocketModem card installed, say N.
-
-config CYCLADES
-	tristate "Cyclades async mux support"
-	depends on SERIAL_NONSTANDARD && (PCI || ISA)
-	select FW_LOADER
-	---help---
-	  This driver supports Cyclades Z and Y multiserial boards.
-	  You would need something like this to connect more than two modems to
-	  your Linux box, for instance in order to become a dial-in server.
-
-	  For information about the Cyclades-Z card, read
-	  <file:Documentation/serial/README.cycladesZ>.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called cyclades.
-
-	  If you haven't heard about it, it's safe to say N.
-
-config CYZ_INTR
-	bool "Cyclades-Z interrupt mode operation (EXPERIMENTAL)"
-	depends on EXPERIMENTAL && CYCLADES
-	help
-	  The Cyclades-Z family of multiport cards allows 2 (two) driver op
-	  modes: polling and interrupt. In polling mode, the driver will check
-	  the status of the Cyclades-Z ports every certain amount of time
-	  (which is called polling cycle and is configurable). In interrupt
-	  mode, it will use an interrupt line (IRQ) in order to check the
-	  status of the Cyclades-Z ports. The default op mode is polling. If
-	  unsure, say N.
-
-config DIGIEPCA
-	tristate "Digiboard Intelligent Async Support"
-	depends on SERIAL_NONSTANDARD && (ISA || EISA || PCI)
-	---help---
-	  This is a driver for Digi International's Xx, Xeve, and Xem series
-	  of cards which provide multiple serial ports. You would need
-	  something like this to connect more than two modems to your Linux
-	  box, for instance in order to become a dial-in server. This driver
-	  supports the original PC (ISA) boards as well as PCI, and EISA. If
-	  you have a card like this, say Y here and read the file
-	  <file:Documentation/serial/digiepca.txt>.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called epca.
-
-config MOXA_INTELLIO
-	tristate "Moxa Intellio support"
-	depends on SERIAL_NONSTANDARD && (ISA || EISA || PCI)
-	select FW_LOADER
-	help
-	  Say Y here if you have a Moxa Intellio multiport serial card.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called moxa.
-
-config MOXA_SMARTIO
-	tristate "Moxa SmartIO support v. 2.0"
-	depends on SERIAL_NONSTANDARD && (PCI || EISA || ISA)
-	help
-	  Say Y here if you have a Moxa SmartIO multiport serial card and/or
-	  want to help develop a new version of this driver.
-
-	  This is upgraded (1.9.1) driver from original Moxa drivers with
-	  changes finally resulting in PCI probing.
-
-	  This driver can also be built as a module. The module will be called
-	  mxser. If you want to do that, say M here.
-
-config ISI
-	tristate "Multi-Tech multiport card support (EXPERIMENTAL)"
-	depends on SERIAL_NONSTANDARD && PCI
-	select FW_LOADER
-	help
-	  This is a driver for the Multi-Tech cards which provide several
-	  serial ports.  The driver is experimental and can currently only be
-	  built as a module. The module will be called isicom.
-	  If you want to do that, choose M here.
-
-config SYNCLINK
-	tristate "Microgate SyncLink card support"
-	depends on SERIAL_NONSTANDARD && PCI && ISA_DMA_API
-	help
-	  Provides support for the SyncLink ISA and PCI multiprotocol serial
-	  adapters. These adapters support asynchronous and HDLC bit
-	  synchronous communication up to 10Mbps (PCI adapter).
-
-	  This driver can only be built as a module ( = code which can be
-	  inserted in and removed from the running kernel whenever you want).
-	  The module will be called synclink.  If you want to do that, say M
-	  here.
-
-config SYNCLINKMP
-	tristate "SyncLink Multiport support"
-	depends on SERIAL_NONSTANDARD && PCI
-	help
-	  Enable support for the SyncLink Multiport (2 or 4 ports)
-	  serial adapter, running asynchronous and HDLC communications up
-	  to 2.048Mbps. Each ports is independently selectable for
-	  RS-232, V.35, RS-449, RS-530, and X.21
-
-	  This driver may be built as a module ( = code which can be
-	  inserted in and removed from the running kernel whenever you want).
-	  The module will be called synclinkmp.  If you want to do that, say M
-	  here.
-
-config SYNCLINK_GT
-	tristate "SyncLink GT/AC support"
-	depends on SERIAL_NONSTANDARD && PCI
-	help
-	  Support for SyncLink GT and SyncLink AC families of
-	  synchronous and asynchronous serial adapters
-	  manufactured by Microgate Systems, Ltd. (www.microgate.com)
-
-config N_HDLC
-	tristate "HDLC line discipline support"
-	depends on SERIAL_NONSTANDARD
-	help
-	  Allows synchronous HDLC communications with tty device drivers that
-	  support synchronous HDLC such as the Microgate SyncLink adapter.
-
-	  This driver can be built as a module ( = code which can be
-	  inserted in and removed from the running kernel whenever you want).
-	  The module will be called n_hdlc. If you want to do that, say M
-	  here.
-
-config N_GSM
-	tristate "GSM MUX line discipline support (EXPERIMENTAL)"
-	depends on EXPERIMENTAL
-	depends on NET
-	help
-	  This line discipline provides support for the GSM MUX protocol and
-	  presents the mux as a set of 61 individual tty devices.
-
-config RISCOM8
-	tristate "SDL RISCom/8 card support"
-	depends on SERIAL_NONSTANDARD
-	help
-	  This is a driver for the SDL Communications RISCom/8 multiport card,
-	  which gives you many serial ports. You would need something like
-	  this to connect more than two modems to your Linux box, for instance
-	  in order to become a dial-in server. If you have a card like that,
-	  say Y here and read the file <file:Documentation/serial/riscom8.txt>.
-
-	  Also it's possible to say M here and compile this driver as kernel
-	  loadable module; the module will be called riscom8.
-
-config SPECIALIX
-	tristate "Specialix IO8+ card support"
-	depends on SERIAL_NONSTANDARD
-	help
-	  This is a driver for the Specialix IO8+ multiport card (both the
-	  ISA and the PCI version) which gives you many serial ports. You
-	  would need something like this to connect more than two modems to
-	  your Linux box, for instance in order to become a dial-in server.
-
-	  If you have a card like that, say Y here and read the file
-	  <file:Documentation/serial/specialix.txt>. Also it's possible to say
-	  M here and compile this driver as kernel loadable module which will be
-	  called specialix.
-
-config SX
-	tristate "Specialix SX (and SI) card support"
-	depends on SERIAL_NONSTANDARD && (PCI || EISA || ISA) && BROKEN
-	help
-	  This is a driver for the SX and SI multiport serial cards.
-	  Please read the file <file:Documentation/serial/sx.txt> for details.
-
-	  This driver can only be built as a module ( = code which can be
-	  inserted in and removed from the running kernel whenever you want).
-	  The module will be called sx. If you want to do that, say M here.
-
-config RIO
-	tristate "Specialix RIO system support"
-	depends on SERIAL_NONSTANDARD && BROKEN
-	help
-	  This is a driver for the Specialix RIO, a smart serial card which
-	  drives an outboard box that can support up to 128 ports.  Product
-	  information is at <http://www.perle.com/support/documentation.html#multiport>.
-	  There are both ISA and PCI versions.
-
-config RIO_OLDPCI
-	bool "Support really old RIO/PCI cards"
-	depends on RIO
-	help
-	  Older RIO PCI cards need some initialization-time configuration to
-	  determine the IRQ and some control addresses.  If you have a RIO and
-	  this doesn't seem to work, try setting this to Y.
-
 config STALDRV
 	bool "Stallion multiport serial support"
 	depends on SERIAL_NONSTANDARD
@@ -356,54 +27,6 @@ config STALDRV
 	  in this case.  If you have never heard about all this, it's safe to
 	  say N.
 
-config STALLION
-	tristate "Stallion EasyIO or EC8/32 support"
-	depends on STALDRV && (ISA || EISA || PCI)
-	help
-	  If you have an EasyIO or EasyConnection 8/32 multiport Stallion
-	  card, then this is for you; say Y.  Make sure to read
-	  <file:Documentation/serial/stallion.txt>.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called stallion.
-
-config ISTALLION
-	tristate "Stallion EC8/64, ONboard, Brumby support"
-	depends on STALDRV && (ISA || EISA || PCI)
-	help
-	  If you have an EasyConnection 8/64, ONboard, Brumby or Stallion
-	  serial multiport card, say Y here. Make sure to read
-	  <file:Documentation/serial/stallion.txt>.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called istallion.
-
-config NOZOMI
-	tristate "HSDPA Broadband Wireless Data Card - Globe Trotter"
-	depends on PCI && EXPERIMENTAL
-	help
-	  If you have a HSDPA driver Broadband Wireless Data Card -
-	  Globe Trotter PCMCIA card, say Y here.
-
-	  To compile this driver as a module, choose M here, the module
-	  will be called nozomi.
-
-config A2232
-	tristate "Commodore A2232 serial support (EXPERIMENTAL)"
-	depends on EXPERIMENTAL && ZORRO && BROKEN
-	---help---
-	  This option supports the 2232 7-port serial card shipped with the
-	  Amiga 2000 and other Zorro-bus machines, dating from 1989.  At
-	  a max of 19,200 bps, the ports are served by a 6551 ACIA UART chip
-	  each, plus a 8520 CIA, and a master 6502 CPU and buffer as well. The
-	  ports were connected with 8 pin DIN connectors on the card bracket,
-	  for which 8 pin to DB25 adapters were supplied. The card also had
-	  jumpers internally to toggle various pinning configurations.
-
-	  This driver can be built as a module; but then "generic_serial"
-	  will also be built as a module. This has to be loaded before
-	  "ser_a2232". If you want to do this, answer M here.
-
 config SGI_SNSC
 	bool "SGI Altix system controller communication support"
 	depends on (IA64_SGI_SN2 || IA64_GENERIC)
@@ -428,71 +51,6 @@ config SGI_MBCS
 
 source "drivers/tty/serial/Kconfig"
 
-config UNIX98_PTYS
-	bool "Unix98 PTY support" if EXPERT
-	default y
-	---help---
-	  A pseudo terminal (PTY) is a software device consisting of two
-	  halves: a master and a slave. The slave device behaves identical to
-	  a physical terminal; the master device is used by a process to
-	  read data from and write data to the slave, thereby emulating a
-	  terminal. Typical programs for the master side are telnet servers
-	  and xterms.
-
-	  Linux has traditionally used the BSD-like names /dev/ptyxx for
-	  masters and /dev/ttyxx for slaves of pseudo terminals. This scheme
-	  has a number of problems. The GNU C library glibc 2.1 and later,
-	  however, supports the Unix98 naming standard: in order to acquire a
-	  pseudo terminal, a process opens /dev/ptmx; the number of the pseudo
-	  terminal is then made available to the process and the pseudo
-	  terminal slave can be accessed as /dev/pts/<number>. What was
-	  traditionally /dev/ttyp2 will then be /dev/pts/2, for example.
-
-	  All modern Linux systems use the Unix98 ptys.  Say Y unless
-	  you're on an embedded system and want to conserve memory.
-
-config DEVPTS_MULTIPLE_INSTANCES
-	bool "Support multiple instances of devpts"
-	depends on UNIX98_PTYS
-	default n
-	---help---
-	  Enable support for multiple instances of devpts filesystem.
-	  If you want to have isolated PTY namespaces (eg: in containers),
-	  say Y here.  Otherwise, say N. If enabled, each mount of devpts
-	  filesystem with the '-o newinstance' option will create an
-	  independent PTY namespace.
-
-config LEGACY_PTYS
-	bool "Legacy (BSD) PTY support"
-	default y
-	---help---
-	  A pseudo terminal (PTY) is a software device consisting of two
-	  halves: a master and a slave. The slave device behaves identical to
-	  a physical terminal; the master device is used by a process to
-	  read data from and write data to the slave, thereby emulating a
-	  terminal. Typical programs for the master side are telnet servers
-	  and xterms.
-
-	  Linux has traditionally used the BSD-like names /dev/ptyxx
-	  for masters and /dev/ttyxx for slaves of pseudo
-	  terminals. This scheme has a number of problems, including
-	  security.  This option enables these legacy devices; on most
-	  systems, it is safe to say N.
-
-
-config LEGACY_PTY_COUNT
-	int "Maximum number of legacy PTY in use"
-	depends on LEGACY_PTYS
-	range 0 256
-	default "256"
-	---help---
-	  The maximum number of legacy PTYs that can be used at any one time.
-	  The default is 256, and should be more than enough.  Embedded
-	  systems may want to reduce this to save memory.
-
-	  When not in use, each legacy PTY occupies 12 bytes on 32-bit
-	  architectures and 24 bytes on 64-bit architectures.
-
 config TTY_PRINTK
 	bool "TTY driver to output user messages via printk"
 	depends on EXPERT
@@ -612,84 +170,7 @@ config PPDEV
 
 	  If unsure, say N.
 
-config HVC_DRIVER
-	bool
-	help
-	  Generic "hypervisor virtual console" infrastructure for various
-	  hypervisors (pSeries, iSeries, Xen, lguest).
-	  It will automatically be selected if one of the back-end console drivers
-	  is selected.
-
-config HVC_IRQ
-	bool
-
-config HVC_CONSOLE
-	bool "pSeries Hypervisor Virtual Console support"
-	depends on PPC_PSERIES
-	select HVC_DRIVER
-	select HVC_IRQ
-	help
-	  pSeries machines when partitioned support a hypervisor virtual
-	  console. This driver allows each pSeries partition to have a console
-	  which is accessed via the HMC.
-
-config HVC_ISERIES
-	bool "iSeries Hypervisor Virtual Console support"
-	depends on PPC_ISERIES
-	default y
-	select HVC_DRIVER
-	select HVC_IRQ
-	select VIOPATH
-	help
-	  iSeries machines support a hypervisor virtual console.
-
-config HVC_RTAS
-	bool "IBM RTAS Console support"
-	depends on PPC_RTAS
-	select HVC_DRIVER
-	help
-	  IBM Console device driver which makes use of RTAS
-
-config HVC_BEAT
-	bool "Toshiba's Beat Hypervisor Console support"
-	depends on PPC_CELLEB
-	select HVC_DRIVER
-	help
-	  Toshiba's Cell Reference Set Beat Console device driver
-
-config HVC_IUCV
-	bool "z/VM IUCV Hypervisor console support (VM only)"
-	depends on S390
-	select HVC_DRIVER
-	select IUCV
-	default y
-	help
-	  This driver provides a Hypervisor console (HVC) back-end to access
-	  a Linux (console) terminal via a z/VM IUCV communication path.
-
-config HVC_XEN
-	bool "Xen Hypervisor Console support"
-	depends on XEN
-	select HVC_DRIVER
-	select HVC_IRQ
-	default y
-	help
-	  Xen virtual console device driver
-
-config HVC_UDBG
-       bool "udbg based fake hypervisor console"
-       depends on PPC && EXPERIMENTAL
-       select HVC_DRIVER
-       default n
-
-config HVC_DCC
-       bool "ARM JTAG DCC console"
-       depends on ARM
-       select HVC_DRIVER
-       help
-         This console uses the JTAG DCC on ARM to create a console under the HVC
-	 driver. This console is used through a JTAG only on ARM. If you don't have
-	 a JTAG then you probably don't want this option.
+source "drivers/tty/hvc/Kconfig"
 
 config VIRTIO_CONSOLE
 	tristate "Virtio console"
@@ -707,23 +188,6 @@ config VIRTIO_CONSOLE
 	  the port which can be used by udev scripts to create a
 	  symlink to the device.
 
-config HVCS
-	tristate "IBM Hypervisor Virtual Console Server support"
-	depends on PPC_PSERIES && HVC_CONSOLE
-	help
-	  Partitionable IBM Power5 ppc64 machines allow hosting of
-	  firmware virtual consoles from one Linux partition by
-	  another Linux partition.  This driver allows console data
-	  from Linux partitions to be accessed through TTY device
-	  interfaces in the device tree of a Linux partition running
-	  this driver.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called hvcs.  Additionally, this module
-	  will depend on arch specific APIs exported from hvcserver.ko
-	  which will also be compiled when this driver is built as a
-	  module.
-
 config IBM_BSR
 	tristate "IBM POWER Barrier Synchronization Register support"
 	depends on PPC_PSERIES
diff --git a/drivers/char/Makefile b/drivers/char/Makefile
index 8238f89f73c9..057f65452e7b 100644
--- a/drivers/char/Makefile
+++ b/drivers/char/Makefile
@@ -5,31 +5,7 @@
 obj-y				+= mem.o random.o
 obj-$(CONFIG_TTY_PRINTK)	+= ttyprintk.o
 obj-y				+= misc.o
-obj-$(CONFIG_BFIN_JTAG_COMM)	+= bfin_jtag_comm.o
-obj-$(CONFIG_MVME147_SCC)	+= generic_serial.o vme_scc.o
-obj-$(CONFIG_MVME162_SCC)	+= generic_serial.o vme_scc.o
-obj-$(CONFIG_BVME6000_SCC)	+= generic_serial.o vme_scc.o
-obj-$(CONFIG_ROCKETPORT)	+= rocket.o
-obj-$(CONFIG_SERIAL167)		+= serial167.o
-obj-$(CONFIG_CYCLADES)		+= cyclades.o
-obj-$(CONFIG_STALLION)		+= stallion.o
-obj-$(CONFIG_ISTALLION)		+= istallion.o
-obj-$(CONFIG_NOZOMI)		+= nozomi.o
-obj-$(CONFIG_DIGIEPCA)		+= epca.o
-obj-$(CONFIG_SPECIALIX)		+= specialix.o
-obj-$(CONFIG_MOXA_INTELLIO)	+= moxa.o
-obj-$(CONFIG_A2232)		+= ser_a2232.o generic_serial.o
 obj-$(CONFIG_ATARI_DSP56K)	+= dsp56k.o
-obj-$(CONFIG_MOXA_SMARTIO)	+= mxser.o
-obj-$(CONFIG_COMPUTONE)		+= ip2/
-obj-$(CONFIG_RISCOM8)		+= riscom8.o
-obj-$(CONFIG_ISI)		+= isicom.o
-obj-$(CONFIG_SYNCLINK)		+= synclink.o
-obj-$(CONFIG_SYNCLINKMP)	+= synclinkmp.o
-obj-$(CONFIG_SYNCLINK_GT)	+= synclink_gt.o
-obj-$(CONFIG_AMIGA_BUILTIN_SERIAL) += amiserial.o
-obj-$(CONFIG_SX)		+= sx.o generic_serial.o
-obj-$(CONFIG_RIO)		+= rio/ generic_serial.o
 obj-$(CONFIG_VIRTIO_CONSOLE)	+= virtio_console.o
 obj-$(CONFIG_RAW_DRIVER)	+= raw.o
 obj-$(CONFIG_SGI_SNSC)		+= snsc.o snsc_event.o
diff --git a/drivers/char/pcmcia/Makefile b/drivers/char/pcmcia/Makefile
index be8f287aa398..0aae20985d57 100644
--- a/drivers/char/pcmcia/Makefile
+++ b/drivers/char/pcmcia/Makefile
@@ -4,8 +4,6 @@
 # Makefile for the Linux PCMCIA char device drivers.
 #
 
-obj-y += ipwireless/
-
 obj-$(CONFIG_SYNCLINK_CS) += synclink_cs.o
 obj-$(CONFIG_CARDMAN_4000) += cm4000_cs.o
 obj-$(CONFIG_CARDMAN_4040) += cm4040_cs.o
diff --git a/drivers/char/pcmcia/synclink_cs.c b/drivers/char/pcmcia/synclink_cs.c
index eaa41992fbe2..beca80bb9bdb 100644
--- a/drivers/char/pcmcia/synclink_cs.c
+++ b/drivers/char/pcmcia/synclink_cs.c
@@ -418,9 +418,9 @@ static void bh_status(MGSLPC_INFO *info);
 /*
  * ioctl handlers
  */
-static int tiocmget(struct tty_struct *tty, struct file *file);
-static int tiocmset(struct tty_struct *tty, struct file *file,
-		    unsigned int set, unsigned int clear);
+static int tiocmget(struct tty_struct *tty);
+static int tiocmset(struct tty_struct *tty,
+					unsigned int set, unsigned int clear);
 static int get_stats(MGSLPC_INFO *info, struct mgsl_icount __user *user_icount);
 static int get_params(MGSLPC_INFO *info, MGSL_PARAMS __user *user_params);
 static int set_params(MGSLPC_INFO *info, MGSL_PARAMS __user *new_params, struct tty_struct *tty);
@@ -2114,7 +2114,7 @@ static int modem_input_wait(MGSLPC_INFO *info,int arg)
 
 /* return the state of the serial control and status signals
  */
-static int tiocmget(struct tty_struct *tty, struct file *file)
+static int tiocmget(struct tty_struct *tty)
 {
 	MGSLPC_INFO *info = (MGSLPC_INFO *)tty->driver_data;
 	unsigned int result;
@@ -2139,7 +2139,7 @@ static int tiocmget(struct tty_struct *tty, struct file *file)
 
 /* set modem control signals (DTR/RTS)
  */
-static int tiocmset(struct tty_struct *tty, struct file *file,
+static int tiocmset(struct tty_struct *tty,
 		    unsigned int set, unsigned int clear)
 {
 	MGSLPC_INFO *info = (MGSLPC_INFO *)tty->driver_data;
@@ -2222,13 +2222,12 @@ static int mgslpc_get_icount(struct tty_struct *tty,
  * Arguments:
  *
  * 	tty	pointer to tty instance data
- * 	file	pointer to associated file object for device
  * 	cmd	IOCTL command code
  * 	arg	command argument/context
  *
  * Return Value:	0 if success, otherwise error code
  */
-static int mgslpc_ioctl(struct tty_struct *tty, struct file * file,
+static int mgslpc_ioctl(struct tty_struct *tty,
 			unsigned int cmd, unsigned long arg)
 {
 	MGSLPC_INFO * info = (MGSLPC_INFO *)tty->driver_data;
diff --git a/drivers/char/ttyprintk.c b/drivers/char/ttyprintk.c
index c40c1612c8a7..a1f68af4ccf4 100644
--- a/drivers/char/ttyprintk.c
+++ b/drivers/char/ttyprintk.c
@@ -144,7 +144,7 @@ static int tpk_write_room(struct tty_struct *tty)
 /*
  * TTY operations ioctl function.
  */
-static int tpk_ioctl(struct tty_struct *tty, struct file *file,
+static int tpk_ioctl(struct tty_struct *tty,
 			unsigned int cmd, unsigned long arg)
 {
 	struct ttyprintk_port *tpkp = tty->driver_data;
diff --git a/drivers/isdn/capi/capi.c b/drivers/isdn/capi/capi.c
index f80a7c48a35f..0d7088367038 100644
--- a/drivers/isdn/capi/capi.c
+++ b/drivers/isdn/capi/capi.c
@@ -1219,16 +1219,10 @@ static int capinc_tty_chars_in_buffer(struct tty_struct *tty)
 	return mp->outbytes;
 }
 
-static int capinc_tty_ioctl(struct tty_struct *tty, struct file * file,
+static int capinc_tty_ioctl(struct tty_struct *tty,
 		    unsigned int cmd, unsigned long arg)
 {
-	int error = 0;
-	switch (cmd) {
-	default:
-		error = n_tty_ioctl_helper(tty, file, cmd, arg);
-		break;
-	}
-	return error;
+	return -ENOIOCTLCMD;
 }
 
 static void capinc_tty_set_termios(struct tty_struct *tty, struct ktermios * old)
diff --git a/drivers/isdn/gigaset/interface.c b/drivers/isdn/gigaset/interface.c
index bb710d16a526..59de638225fe 100644
--- a/drivers/isdn/gigaset/interface.c
+++ b/drivers/isdn/gigaset/interface.c
@@ -115,15 +115,15 @@ static int if_config(struct cardstate *cs, int *arg)
 
 static int  if_open(struct tty_struct *tty, struct file *filp);
 static void if_close(struct tty_struct *tty, struct file *filp);
-static int  if_ioctl(struct tty_struct *tty, struct file *file,
+static int  if_ioctl(struct tty_struct *tty,
 		     unsigned int cmd, unsigned long arg);
 static int  if_write_room(struct tty_struct *tty);
 static int  if_chars_in_buffer(struct tty_struct *tty);
 static void if_throttle(struct tty_struct *tty);
 static void if_unthrottle(struct tty_struct *tty);
 static void if_set_termios(struct tty_struct *tty, struct ktermios *old);
-static int  if_tiocmget(struct tty_struct *tty, struct file *file);
-static int  if_tiocmset(struct tty_struct *tty, struct file *file,
+static int  if_tiocmget(struct tty_struct *tty);
+static int  if_tiocmset(struct tty_struct *tty,
 			unsigned int set, unsigned int clear);
 static int  if_write(struct tty_struct *tty,
 		     const unsigned char *buf, int count);
@@ -205,7 +205,7 @@ static void if_close(struct tty_struct *tty, struct file *filp)
 	module_put(cs->driver->owner);
 }
 
-static int if_ioctl(struct tty_struct *tty, struct file *file,
+static int if_ioctl(struct tty_struct *tty,
 		    unsigned int cmd, unsigned long arg)
 {
 	struct cardstate *cs;
@@ -280,7 +280,7 @@ static int if_ioctl(struct tty_struct *tty, struct file *file,
 	return retval;
 }
 
-static int if_tiocmget(struct tty_struct *tty, struct file *file)
+static int if_tiocmget(struct tty_struct *tty)
 {
 	struct cardstate *cs;
 	int retval;
@@ -303,7 +303,7 @@ static int if_tiocmget(struct tty_struct *tty, struct file *file)
 	return retval;
 }
 
-static int if_tiocmset(struct tty_struct *tty, struct file *file,
+static int if_tiocmset(struct tty_struct *tty,
 		       unsigned int set, unsigned int clear)
 {
 	struct cardstate *cs;
diff --git a/drivers/isdn/gigaset/ser-gigaset.c b/drivers/isdn/gigaset/ser-gigaset.c
index 0ef09d0eb96b..86a5c4f7775e 100644
--- a/drivers/isdn/gigaset/ser-gigaset.c
+++ b/drivers/isdn/gigaset/ser-gigaset.c
@@ -440,7 +440,7 @@ static int gigaset_set_modem_ctrl(struct cardstate *cs, unsigned old_state,
 	if (!set && !clear)
 		return 0;
 	gig_dbg(DEBUG_IF, "tiocmset set %x clear %x", set, clear);
-	return tty->ops->tiocmset(tty, NULL, set, clear);
+	return tty->ops->tiocmset(tty, set, clear);
 }
 
 static int gigaset_baud_rate(struct cardstate *cs, unsigned cflag)
diff --git a/drivers/isdn/i4l/isdn_tty.c b/drivers/isdn/i4l/isdn_tty.c
index c463162843ba..3d88f15aa218 100644
--- a/drivers/isdn/i4l/isdn_tty.c
+++ b/drivers/isdn/i4l/isdn_tty.c
@@ -1345,7 +1345,7 @@ isdn_tty_get_lsr_info(modem_info * info, uint __user * value)
 
 
 static int
-isdn_tty_tiocmget(struct tty_struct *tty, struct file *file)
+isdn_tty_tiocmget(struct tty_struct *tty)
 {
 	modem_info *info = (modem_info *) tty->driver_data;
 	u_char control, status;
@@ -1372,7 +1372,7 @@ isdn_tty_tiocmget(struct tty_struct *tty, struct file *file)
 }
 
 static int
-isdn_tty_tiocmset(struct tty_struct *tty, struct file *file,
+isdn_tty_tiocmset(struct tty_struct *tty,
 		unsigned int set, unsigned int clear)
 {
 	modem_info *info = (modem_info *) tty->driver_data;
@@ -1413,8 +1413,7 @@ isdn_tty_tiocmset(struct tty_struct *tty, struct file *file,
 }
 
 static int
-isdn_tty_ioctl(struct tty_struct *tty, struct file *file,
-	       uint cmd, ulong arg)
+isdn_tty_ioctl(struct tty_struct *tty, uint cmd, ulong arg)
 {
 	modem_info *info = (modem_info *) tty->driver_data;
 	int retval;
diff --git a/drivers/misc/pch_phub.c b/drivers/misc/pch_phub.c
index 98bffc471b17..380ba806495d 100644
--- a/drivers/misc/pch_phub.c
+++ b/drivers/misc/pch_phub.c
@@ -27,6 +27,7 @@
 #include <linux/mutex.h>
 #include <linux/if_ether.h>
 #include <linux/ctype.h>
+#include <linux/dmi.h>
 
 #define PHUB_STATUS 0x00		/* Status Register offset */
 #define PHUB_CONTROL 0x04		/* Control Register offset */
@@ -46,6 +47,17 @@
 #define PCH_MINOR_NOS 1
 #define CLKCFG_CAN_50MHZ 0x12000000
 #define CLKCFG_CANCLK_MASK 0xFF000000
+#define CLKCFG_UART_MASK			0xFFFFFF
+
+/* CM-iTC */
+#define CLKCFG_UART_48MHZ			(1 << 16)
+#define CLKCFG_BAUDDIV				(2 << 20)
+#define CLKCFG_PLL2VCO				(8 << 9)
+#define CLKCFG_UARTCLKSEL			(1 << 18)
+
+/* Macros for ML7213 */
+#define PCI_VENDOR_ID_ROHM			0x10db
+#define PCI_DEVICE_ID_ROHM_ML7213_PHUB		0x801A
 
 /* Macros for ML7213 */
 #define PCI_VENDOR_ID_ROHM			0x10db
@@ -618,6 +630,14 @@ static int __devinit pch_phub_probe(struct pci_dev *pdev,
 					       CLKCFG_CAN_50MHZ,
 					       CLKCFG_CANCLK_MASK);
 
+		/* quirk for CM-iTC board */
+		if (strstr(dmi_get_system_info(DMI_BOARD_NAME), "CM-iTC"))
+			pch_phub_read_modify_write_reg(chip,
+						(unsigned int)CLKCFG_REG_OFFSET,
+						CLKCFG_UART_48MHZ | CLKCFG_BAUDDIV |
+						CLKCFG_PLL2VCO | CLKCFG_UARTCLKSEL,
+						CLKCFG_UART_MASK);
+
 		/* set the prefech value */
 		iowrite32(0x000affaa, chip->pch_phub_base_address + 0x14);
 		/* set the interrupt delay value */
diff --git a/drivers/mmc/card/sdio_uart.c b/drivers/mmc/card/sdio_uart.c
index a0716967b7c8..c8c9edb3d7cb 100644
--- a/drivers/mmc/card/sdio_uart.c
+++ b/drivers/mmc/card/sdio_uart.c
@@ -956,7 +956,7 @@ static int sdio_uart_break_ctl(struct tty_struct *tty, int break_state)
 	return 0;
 }
 
-static int sdio_uart_tiocmget(struct tty_struct *tty, struct file *file)
+static int sdio_uart_tiocmget(struct tty_struct *tty)
 {
 	struct sdio_uart_port *port = tty->driver_data;
 	int result;
@@ -970,7 +970,7 @@ static int sdio_uart_tiocmget(struct tty_struct *tty, struct file *file)
 	return result;
 }
 
-static int sdio_uart_tiocmset(struct tty_struct *tty, struct file *file,
+static int sdio_uart_tiocmset(struct tty_struct *tty,
 			      unsigned int set, unsigned int clear)
 {
 	struct sdio_uart_port *port = tty->driver_data;
diff --git a/drivers/net/irda/irtty-sir.c b/drivers/net/irda/irtty-sir.c
index ee1dde52e8fc..3352b2443e58 100644
--- a/drivers/net/irda/irtty-sir.c
+++ b/drivers/net/irda/irtty-sir.c
@@ -167,7 +167,7 @@ static int irtty_set_dtr_rts(struct sir_dev *dev, int dtr, int rts)
 	 * let's be careful... Jean II
 	 */
 	IRDA_ASSERT(priv->tty->ops->tiocmset != NULL, return -1;);
-	priv->tty->ops->tiocmset(priv->tty, NULL, set, clear);
+	priv->tty->ops->tiocmset(priv->tty, set, clear);
 
 	return 0;
 }
diff --git a/drivers/net/usb/hso.c b/drivers/net/usb/hso.c
index 6d83812603b6..387ca43f26f4 100644
--- a/drivers/net/usb/hso.c
+++ b/drivers/net/usb/hso.c
@@ -324,7 +324,7 @@ struct hso_device {
 /* Prototypes                                                                */
 /*****************************************************************************/
 /* Serial driver functions */
-static int hso_serial_tiocmset(struct tty_struct *tty, struct file *file,
+static int hso_serial_tiocmset(struct tty_struct *tty,
 			       unsigned int set, unsigned int clear);
 static void ctrl_callback(struct urb *urb);
 static int put_rxbuf_data(struct urb *urb, struct hso_serial *serial);
@@ -1335,7 +1335,7 @@ static int hso_serial_open(struct tty_struct *tty, struct file *filp)
 
 	/* done */
 	if (result)
-		hso_serial_tiocmset(tty, NULL, TIOCM_RTS | TIOCM_DTR, 0);
+		hso_serial_tiocmset(tty, TIOCM_RTS | TIOCM_DTR, 0);
 err_out:
 	mutex_unlock(&serial->parent->mutex);
 	return result;
@@ -1656,7 +1656,7 @@ static int hso_get_count(struct tty_struct *tty,
 }
 
 
-static int hso_serial_tiocmget(struct tty_struct *tty, struct file *file)
+static int hso_serial_tiocmget(struct tty_struct *tty)
 {
 	int retval;
 	struct hso_serial *serial = get_serial_by_tty(tty);
@@ -1687,7 +1687,7 @@ static int hso_serial_tiocmget(struct tty_struct *tty, struct file *file)
 	return retval;
 }
 
-static int hso_serial_tiocmset(struct tty_struct *tty, struct file *file,
+static int hso_serial_tiocmset(struct tty_struct *tty,
 			       unsigned int set, unsigned int clear)
 {
 	int val = 0;
@@ -1730,7 +1730,7 @@ static int hso_serial_tiocmset(struct tty_struct *tty, struct file *file,
 			       USB_CTRL_SET_TIMEOUT);
 }
 
-static int hso_serial_ioctl(struct tty_struct *tty, struct file *file,
+static int hso_serial_ioctl(struct tty_struct *tty,
 			    unsigned int cmd, unsigned long arg)
 {
 	struct hso_serial *serial =  get_serial_by_tty(tty);
diff --git a/drivers/net/wan/pc300_tty.c b/drivers/net/wan/pc300_tty.c
index 515d9b8af01e..1c65d1c33873 100644
--- a/drivers/net/wan/pc300_tty.c
+++ b/drivers/net/wan/pc300_tty.c
@@ -131,9 +131,8 @@ static void cpc_tty_trace(pc300dev_t *dev, char* buf, int len, char rxtx);
 static void cpc_tty_signal_off(pc300dev_t *pc300dev, unsigned char);
 static void cpc_tty_signal_on(pc300dev_t *pc300dev, unsigned char);
 
-static int pc300_tiocmset(struct tty_struct *, struct file *,
-			  unsigned int, unsigned int);
-static int pc300_tiocmget(struct tty_struct *, struct file *);
+static int pc300_tiocmset(struct tty_struct *, unsigned int, unsigned int);
+static int pc300_tiocmget(struct tty_struct *);
 
 /* functions called by PC300 driver */
 void cpc_tty_init(pc300dev_t *dev);
@@ -543,7 +542,7 @@ static int cpc_tty_chars_in_buffer(struct tty_struct *tty)
 	return 0;
 } 
 
-static int pc300_tiocmset(struct tty_struct *tty, struct file *file,
+static int pc300_tiocmset(struct tty_struct *tty,
 			  unsigned int set, unsigned int clear)
 {
 	st_cpc_tty_area    *cpc_tty; 
@@ -570,7 +569,7 @@ static int pc300_tiocmset(struct tty_struct *tty, struct file *file,
 	return 0;
 }
 
-static int pc300_tiocmget(struct tty_struct *tty, struct file *file)
+static int pc300_tiocmget(struct tty_struct *tty)
 {
 	unsigned int result;
 	unsigned char status;
diff --git a/drivers/s390/char/keyboard.c b/drivers/s390/char/keyboard.c
index 5ad44daef73b..806588192483 100644
--- a/drivers/s390/char/keyboard.c
+++ b/drivers/s390/char/keyboard.c
@@ -455,9 +455,7 @@ do_kdgkb_ioctl(struct kbd_data *kbd, struct kbsentry __user *u_kbs,
 	return 0;
 }
 
-int
-kbd_ioctl(struct kbd_data *kbd, struct file *file,
-	  unsigned int cmd, unsigned long arg)
+int kbd_ioctl(struct kbd_data *kbd, unsigned int cmd, unsigned long arg)
 {
 	void __user *argp;
 	unsigned int ct;
diff --git a/drivers/s390/char/keyboard.h b/drivers/s390/char/keyboard.h
index 5ccfe9cf126d..7e736aaeae6e 100644
--- a/drivers/s390/char/keyboard.h
+++ b/drivers/s390/char/keyboard.h
@@ -36,7 +36,7 @@ void kbd_free(struct kbd_data *);
 void kbd_ascebc(struct kbd_data *, unsigned char *);
 
 void kbd_keycode(struct kbd_data *, unsigned int);
-int kbd_ioctl(struct kbd_data *, struct file *, unsigned int, unsigned long);
+int kbd_ioctl(struct kbd_data *, unsigned int, unsigned long);
 
 /*
  * Helper Functions.
diff --git a/drivers/s390/char/tty3270.c b/drivers/s390/char/tty3270.c
index 911822db614d..d33554df2b06 100644
--- a/drivers/s390/char/tty3270.c
+++ b/drivers/s390/char/tty3270.c
@@ -1718,9 +1718,8 @@ tty3270_wait_until_sent(struct tty_struct *tty, int timeout)
 {
 }
 
-static int
-tty3270_ioctl(struct tty_struct *tty, struct file *file,
-	      unsigned int cmd, unsigned long arg)
+static int tty3270_ioctl(struct tty_struct *tty, unsigned int cmd,
+			 unsigned long arg)
 {
 	struct tty3270 *tp;
 
@@ -1729,13 +1728,12 @@ tty3270_ioctl(struct tty_struct *tty, struct file *file,
 		return -ENODEV;
 	if (tty->flags & (1 << TTY_IO_ERROR))
 		return -EIO;
-	return kbd_ioctl(tp->kbd, file, cmd, arg);
+	return kbd_ioctl(tp->kbd, cmd, arg);
 }
 
 #ifdef CONFIG_COMPAT
-static long
-tty3270_compat_ioctl(struct tty_struct *tty, struct file *file,
-	      unsigned int cmd, unsigned long arg)
+static long tty3270_compat_ioctl(struct tty_struct *tty,
+				 unsigned int cmd, unsigned long arg)
 {
 	struct tty3270 *tp;
 
@@ -1744,7 +1742,7 @@ tty3270_compat_ioctl(struct tty_struct *tty, struct file *file,
 		return -ENODEV;
 	if (tty->flags & (1 << TTY_IO_ERROR))
 		return -EIO;
-	return kbd_ioctl(tp->kbd, file, cmd, (unsigned long)compat_ptr(arg));
+	return kbd_ioctl(tp->kbd, cmd, (unsigned long)compat_ptr(arg));
 }
 #endif
 
diff --git a/drivers/staging/Kconfig b/drivers/staging/Kconfig
index 5c8fcfc42c3e..58e4a8e15a0e 100644
--- a/drivers/staging/Kconfig
+++ b/drivers/staging/Kconfig
@@ -41,6 +41,10 @@ config STAGING_EXCLUDE_BUILD
 
 if !STAGING_EXCLUDE_BUILD
 
+source "drivers/staging/tty/Kconfig"
+
+source "drivers/staging/generic_serial/Kconfig"
+
 source "drivers/staging/et131x/Kconfig"
 
 source "drivers/staging/slicoss/Kconfig"
diff --git a/drivers/staging/Makefile b/drivers/staging/Makefile
index d53886317826..ff7372d25c91 100644
--- a/drivers/staging/Makefile
+++ b/drivers/staging/Makefile
@@ -3,6 +3,8 @@
 # fix for build system bug...
 obj-$(CONFIG_STAGING)		+= staging.o
 
+obj-y += tty/
+obj-y += generic_serial/
 obj-$(CONFIG_ET131X)		+= et131x/
 obj-$(CONFIG_SLICOSS)		+= slicoss/
 obj-$(CONFIG_VIDEO_GO7007)	+= go7007/
diff --git a/drivers/staging/generic_serial/Kconfig b/drivers/staging/generic_serial/Kconfig
new file mode 100644
index 000000000000..795daea37750
--- /dev/null
+++ b/drivers/staging/generic_serial/Kconfig
@@ -0,0 +1,45 @@
+config A2232
+	tristate "Commodore A2232 serial support (EXPERIMENTAL)"
+	depends on EXPERIMENTAL && ZORRO && BROKEN
+	---help---
+	  This option supports the 2232 7-port serial card shipped with the
+	  Amiga 2000 and other Zorro-bus machines, dating from 1989.  At
+	  a max of 19,200 bps, the ports are served by a 6551 ACIA UART chip
+	  each, plus a 8520 CIA, and a master 6502 CPU and buffer as well. The
+	  ports were connected with 8 pin DIN connectors on the card bracket,
+	  for which 8 pin to DB25 adapters were supplied. The card also had
+	  jumpers internally to toggle various pinning configurations.
+
+	  This driver can be built as a module; but then "generic_serial"
+	  will also be built as a module. This has to be loaded before
+	  "ser_a2232". If you want to do this, answer M here.
+
+config SX
+	tristate "Specialix SX (and SI) card support"
+	depends on SERIAL_NONSTANDARD && (PCI || EISA || ISA) && BROKEN
+	help
+	  This is a driver for the SX and SI multiport serial cards.
+	  Please read the file <file:Documentation/serial/sx.txt> for details.
+
+	  This driver can only be built as a module ( = code which can be
+	  inserted in and removed from the running kernel whenever you want).
+	  The module will be called sx. If you want to do that, say M here.
+
+config RIO
+	tristate "Specialix RIO system support"
+	depends on SERIAL_NONSTANDARD && BROKEN
+	help
+	  This is a driver for the Specialix RIO, a smart serial card which
+	  drives an outboard box that can support up to 128 ports.  Product
+	  information is at <http://www.perle.com/support/documentation.html#multiport>.
+	  There are both ISA and PCI versions.
+
+config RIO_OLDPCI
+	bool "Support really old RIO/PCI cards"
+	depends on RIO
+	help
+	  Older RIO PCI cards need some initialization-time configuration to
+	  determine the IRQ and some control addresses.  If you have a RIO and
+	  this doesn't seem to work, try setting this to Y.
+
+
diff --git a/drivers/staging/generic_serial/Makefile b/drivers/staging/generic_serial/Makefile
new file mode 100644
index 000000000000..ffc90c8b013c
--- /dev/null
+++ b/drivers/staging/generic_serial/Makefile
@@ -0,0 +1,6 @@
+obj-$(CONFIG_MVME147_SCC)	+= generic_serial.o vme_scc.o
+obj-$(CONFIG_MVME162_SCC)	+= generic_serial.o vme_scc.o
+obj-$(CONFIG_BVME6000_SCC)	+= generic_serial.o vme_scc.o
+obj-$(CONFIG_A2232)		+= ser_a2232.o generic_serial.o
+obj-$(CONFIG_SX)		+= sx.o generic_serial.o
+obj-$(CONFIG_RIO)		+= rio/ generic_serial.o
diff --git a/drivers/staging/generic_serial/TODO b/drivers/staging/generic_serial/TODO
new file mode 100644
index 000000000000..88756453ac6c
--- /dev/null
+++ b/drivers/staging/generic_serial/TODO
@@ -0,0 +1,6 @@
+These are a few tty/serial drivers that either do not build,
+or work if they do build, or if they seem to work, are for obsolete
+hardware, or are full of unfixable races and no one uses them anymore.
+
+If no one steps up to adopt any of these drivers, they will be removed
+in the 2.6.41 release.
diff --git a/drivers/char/generic_serial.c b/drivers/staging/generic_serial/generic_serial.c
index 5954ee1dc953..466988dbc37d 100644
--- a/drivers/char/generic_serial.c
+++ b/drivers/staging/generic_serial/generic_serial.c
@@ -566,9 +566,9 @@ void gs_close(struct tty_struct * tty, struct file * filp)
 	 * line status register.
 	 */
 
-	spin_lock_irqsave(&port->driver_lock, flags);
+	spin_lock(&port->driver_lock);
 	port->rd->disable_rx_interrupts (port);
-	spin_unlock_irqrestore(&port->driver_lock, flags);
+	spin_unlock(&port->driver_lock);
 	spin_unlock_irqrestore(&port->port.lock, flags);
 
 	/* close has no way of returning "EINTR", so discard return value */
diff --git a/drivers/char/rio/Makefile b/drivers/staging/generic_serial/rio/Makefile
index 1661875883fb..1661875883fb 100644
--- a/drivers/char/rio/Makefile
+++ b/drivers/staging/generic_serial/rio/Makefile
diff --git a/drivers/char/rio/board.h b/drivers/staging/generic_serial/rio/board.h
index bdea633a9076..bdea633a9076 100644
--- a/drivers/char/rio/board.h
+++ b/drivers/staging/generic_serial/rio/board.h
diff --git a/drivers/char/rio/cirrus.h b/drivers/staging/generic_serial/rio/cirrus.h
index 5ab51679caa2..5ab51679caa2 100644
--- a/drivers/char/rio/cirrus.h
+++ b/drivers/staging/generic_serial/rio/cirrus.h
diff --git a/drivers/char/rio/cmdblk.h b/drivers/staging/generic_serial/rio/cmdblk.h
index 9ed4f861675a..9ed4f861675a 100644
--- a/drivers/char/rio/cmdblk.h
+++ b/drivers/staging/generic_serial/rio/cmdblk.h
diff --git a/drivers/char/rio/cmdpkt.h b/drivers/staging/generic_serial/rio/cmdpkt.h
index c1e7a2798070..c1e7a2798070 100644
--- a/drivers/char/rio/cmdpkt.h
+++ b/drivers/staging/generic_serial/rio/cmdpkt.h
diff --git a/drivers/char/rio/daemon.h b/drivers/staging/generic_serial/rio/daemon.h
index 4af90323fd00..4af90323fd00 100644
--- a/drivers/char/rio/daemon.h
+++ b/drivers/staging/generic_serial/rio/daemon.h
diff --git a/drivers/char/rio/errors.h b/drivers/staging/generic_serial/rio/errors.h
index bdb05234090a..bdb05234090a 100644
--- a/drivers/char/rio/errors.h
+++ b/drivers/staging/generic_serial/rio/errors.h
diff --git a/drivers/char/rio/func.h b/drivers/staging/generic_serial/rio/func.h
index 078d44f85e45..078d44f85e45 100644
--- a/drivers/char/rio/func.h
+++ b/drivers/staging/generic_serial/rio/func.h
diff --git a/drivers/char/rio/host.h b/drivers/staging/generic_serial/rio/host.h
index 78f24540c224..78f24540c224 100644
--- a/drivers/char/rio/host.h
+++ b/drivers/staging/generic_serial/rio/host.h
diff --git a/drivers/char/rio/link.h b/drivers/staging/generic_serial/rio/link.h
index f3bf11a04d41..f3bf11a04d41 100644
--- a/drivers/char/rio/link.h
+++ b/drivers/staging/generic_serial/rio/link.h
diff --git a/drivers/char/rio/linux_compat.h b/drivers/staging/generic_serial/rio/linux_compat.h
index 34c0d2899ef1..34c0d2899ef1 100644
--- a/drivers/char/rio/linux_compat.h
+++ b/drivers/staging/generic_serial/rio/linux_compat.h
diff --git a/drivers/char/rio/map.h b/drivers/staging/generic_serial/rio/map.h
index 8366978578c1..8366978578c1 100644
--- a/drivers/char/rio/map.h
+++ b/drivers/staging/generic_serial/rio/map.h
diff --git a/drivers/char/rio/param.h b/drivers/staging/generic_serial/rio/param.h
index 7e9b6283e8aa..7e9b6283e8aa 100644
--- a/drivers/char/rio/param.h
+++ b/drivers/staging/generic_serial/rio/param.h
diff --git a/drivers/char/rio/parmmap.h b/drivers/staging/generic_serial/rio/parmmap.h
index acc8fa439df5..acc8fa439df5 100644
--- a/drivers/char/rio/parmmap.h
+++ b/drivers/staging/generic_serial/rio/parmmap.h
diff --git a/drivers/char/rio/pci.h b/drivers/staging/generic_serial/rio/pci.h
index 6032f9135956..6032f9135956 100644
--- a/drivers/char/rio/pci.h
+++ b/drivers/staging/generic_serial/rio/pci.h
diff --git a/drivers/char/rio/phb.h b/drivers/staging/generic_serial/rio/phb.h
index a4c48ae4e365..a4c48ae4e365 100644
--- a/drivers/char/rio/phb.h
+++ b/drivers/staging/generic_serial/rio/phb.h
diff --git a/drivers/char/rio/pkt.h b/drivers/staging/generic_serial/rio/pkt.h
index a9458164f02f..a9458164f02f 100644
--- a/drivers/char/rio/pkt.h
+++ b/drivers/staging/generic_serial/rio/pkt.h
diff --git a/drivers/char/rio/port.h b/drivers/staging/generic_serial/rio/port.h
index 49cf6d15ee54..49cf6d15ee54 100644
--- a/drivers/char/rio/port.h
+++ b/drivers/staging/generic_serial/rio/port.h
diff --git a/drivers/char/rio/protsts.h b/drivers/staging/generic_serial/rio/protsts.h
index 8ab79401d3ee..8ab79401d3ee 100644
--- a/drivers/char/rio/protsts.h
+++ b/drivers/staging/generic_serial/rio/protsts.h
diff --git a/drivers/char/rio/rio.h b/drivers/staging/generic_serial/rio/rio.h
index 1bf36223a4e8..1bf36223a4e8 100644
--- a/drivers/char/rio/rio.h
+++ b/drivers/staging/generic_serial/rio/rio.h
diff --git a/drivers/char/rio/rio_linux.c b/drivers/staging/generic_serial/rio/rio_linux.c
index 5e33293d24e3..5e33293d24e3 100644
--- a/drivers/char/rio/rio_linux.c
+++ b/drivers/staging/generic_serial/rio/rio_linux.c
diff --git a/drivers/char/rio/rio_linux.h b/drivers/staging/generic_serial/rio/rio_linux.h
index 7f26cd7c815e..7f26cd7c815e 100644
--- a/drivers/char/rio/rio_linux.h
+++ b/drivers/staging/generic_serial/rio/rio_linux.h
diff --git a/drivers/char/rio/rioboard.h b/drivers/staging/generic_serial/rio/rioboard.h
index 252230043c82..252230043c82 100644
--- a/drivers/char/rio/rioboard.h
+++ b/drivers/staging/generic_serial/rio/rioboard.h
diff --git a/drivers/char/rio/rioboot.c b/drivers/staging/generic_serial/rio/rioboot.c
index d956dd316005..d956dd316005 100644
--- a/drivers/char/rio/rioboot.c
+++ b/drivers/staging/generic_serial/rio/rioboot.c
diff --git a/drivers/char/rio/riocmd.c b/drivers/staging/generic_serial/rio/riocmd.c
index f121357e5af0..f121357e5af0 100644
--- a/drivers/char/rio/riocmd.c
+++ b/drivers/staging/generic_serial/rio/riocmd.c
diff --git a/drivers/char/rio/rioctrl.c b/drivers/staging/generic_serial/rio/rioctrl.c
index 780506326a73..780506326a73 100644
--- a/drivers/char/rio/rioctrl.c
+++ b/drivers/staging/generic_serial/rio/rioctrl.c
diff --git a/drivers/char/rio/riodrvr.h b/drivers/staging/generic_serial/rio/riodrvr.h
index 0907e711b355..0907e711b355 100644
--- a/drivers/char/rio/riodrvr.h
+++ b/drivers/staging/generic_serial/rio/riodrvr.h
diff --git a/drivers/char/rio/rioinfo.h b/drivers/staging/generic_serial/rio/rioinfo.h
index 42ff1e79d96f..42ff1e79d96f 100644
--- a/drivers/char/rio/rioinfo.h
+++ b/drivers/staging/generic_serial/rio/rioinfo.h
diff --git a/drivers/char/rio/rioinit.c b/drivers/staging/generic_serial/rio/rioinit.c
index 24a282bb89d4..24a282bb89d4 100644
--- a/drivers/char/rio/rioinit.c
+++ b/drivers/staging/generic_serial/rio/rioinit.c
diff --git a/drivers/char/rio/riointr.c b/drivers/staging/generic_serial/rio/riointr.c
index 2e71aecae206..2e71aecae206 100644
--- a/drivers/char/rio/riointr.c
+++ b/drivers/staging/generic_serial/rio/riointr.c
diff --git a/drivers/char/rio/rioioctl.h b/drivers/staging/generic_serial/rio/rioioctl.h
index e8af5b30519e..e8af5b30519e 100644
--- a/drivers/char/rio/rioioctl.h
+++ b/drivers/staging/generic_serial/rio/rioioctl.h
diff --git a/drivers/char/rio/rioparam.c b/drivers/staging/generic_serial/rio/rioparam.c
index 6415f3f32a72..6415f3f32a72 100644
--- a/drivers/char/rio/rioparam.c
+++ b/drivers/staging/generic_serial/rio/rioparam.c
diff --git a/drivers/char/rio/rioroute.c b/drivers/staging/generic_serial/rio/rioroute.c
index f9b936ac3394..f9b936ac3394 100644
--- a/drivers/char/rio/rioroute.c
+++ b/drivers/staging/generic_serial/rio/rioroute.c
diff --git a/drivers/char/rio/riospace.h b/drivers/staging/generic_serial/rio/riospace.h
index ffb31d4332b9..ffb31d4332b9 100644
--- a/drivers/char/rio/riospace.h
+++ b/drivers/staging/generic_serial/rio/riospace.h
diff --git a/drivers/char/rio/riotable.c b/drivers/staging/generic_serial/rio/riotable.c
index 3d15802dc0f3..3d15802dc0f3 100644
--- a/drivers/char/rio/riotable.c
+++ b/drivers/staging/generic_serial/rio/riotable.c
diff --git a/drivers/char/rio/riotty.c b/drivers/staging/generic_serial/rio/riotty.c
index 8a90393faf3c..8a90393faf3c 100644
--- a/drivers/char/rio/riotty.c
+++ b/drivers/staging/generic_serial/rio/riotty.c
diff --git a/drivers/char/rio/route.h b/drivers/staging/generic_serial/rio/route.h
index 46e963771c30..46e963771c30 100644
--- a/drivers/char/rio/route.h
+++ b/drivers/staging/generic_serial/rio/route.h
diff --git a/drivers/char/rio/rup.h b/drivers/staging/generic_serial/rio/rup.h
index 4ae90cb207a9..4ae90cb207a9 100644
--- a/drivers/char/rio/rup.h
+++ b/drivers/staging/generic_serial/rio/rup.h
diff --git a/drivers/char/rio/unixrup.h b/drivers/staging/generic_serial/rio/unixrup.h
index 7abf0cba0f2c..7abf0cba0f2c 100644
--- a/drivers/char/rio/unixrup.h
+++ b/drivers/staging/generic_serial/rio/unixrup.h
diff --git a/drivers/char/ser_a2232.c b/drivers/staging/generic_serial/ser_a2232.c
index 9610861d1f5f..3f47c2ead8e5 100644
--- a/drivers/char/ser_a2232.c
+++ b/drivers/staging/generic_serial/ser_a2232.c
@@ -133,8 +133,8 @@ static void a2232_hungup(void *ptr);
 /* END GENERIC_SERIAL PROTOTYPES */
 
 /* Functions that the TTY driver struct expects */
-static int  a2232_ioctl(struct tty_struct *tty, struct file *file,
-										unsigned int cmd, unsigned long arg);
+static int  a2232_ioctl(struct tty_struct *tty,
+				unsigned int cmd, unsigned long arg);
 static void a2232_throttle(struct tty_struct *tty);
 static void a2232_unthrottle(struct tty_struct *tty);
 static int  a2232_open(struct tty_struct * tty, struct file * filp);
@@ -447,7 +447,7 @@ static void a2232_hungup(void *ptr)
 /*** END   OF REAL_DRIVER FUNCTIONS ***/
 
 /*** BEGIN  FUNCTIONS EXPECTED BY TTY DRIVER STRUCTS ***/
-static int a2232_ioctl(	struct tty_struct *tty, struct file *file,
+static int a2232_ioctl(	struct tty_struct *tty,
 			unsigned int cmd, unsigned long arg)
 {
 	return -ENOIOCTLCMD;
diff --git a/drivers/char/ser_a2232.h b/drivers/staging/generic_serial/ser_a2232.h
index bc09eb9e118b..bc09eb9e118b 100644
--- a/drivers/char/ser_a2232.h
+++ b/drivers/staging/generic_serial/ser_a2232.h
diff --git a/drivers/char/ser_a2232fw.ax b/drivers/staging/generic_serial/ser_a2232fw.ax
index 736438032768..736438032768 100644
--- a/drivers/char/ser_a2232fw.ax
+++ b/drivers/staging/generic_serial/ser_a2232fw.ax
diff --git a/drivers/char/ser_a2232fw.h b/drivers/staging/generic_serial/ser_a2232fw.h
index e09a30acfe5c..e09a30acfe5c 100644
--- a/drivers/char/ser_a2232fw.h
+++ b/drivers/staging/generic_serial/ser_a2232fw.h
diff --git a/drivers/char/sx.c b/drivers/staging/generic_serial/sx.c
index a786326cea2f..1291462bcddb 100644
--- a/drivers/char/sx.c
+++ b/drivers/staging/generic_serial/sx.c
@@ -1873,14 +1873,14 @@ static int sx_break(struct tty_struct *tty, int flag)
 	return 0;
 }
 
-static int sx_tiocmget(struct tty_struct *tty, struct file *file)
+static int sx_tiocmget(struct tty_struct *tty)
 {
 	struct sx_port *port = tty->driver_data;
 	return sx_getsignals(port);
 }
 
-static int sx_tiocmset(struct tty_struct *tty, struct file *file,
-		unsigned int set, unsigned int clear)
+static int sx_tiocmset(struct tty_struct *tty,
+					unsigned int set, unsigned int clear)
 {
 	struct sx_port *port = tty->driver_data;
 	int rts = -1, dtr = -1;
@@ -1899,7 +1899,7 @@ static int sx_tiocmset(struct tty_struct *tty, struct file *file,
 	return 0;
 }
 
-static int sx_ioctl(struct tty_struct *tty, struct file *filp,
+static int sx_ioctl(struct tty_struct *tty,
 		unsigned int cmd, unsigned long arg)
 {
 	int rc;
diff --git a/drivers/char/sx.h b/drivers/staging/generic_serial/sx.h
index 87c2defdead7..87c2defdead7 100644
--- a/drivers/char/sx.h
+++ b/drivers/staging/generic_serial/sx.h
diff --git a/drivers/char/sxboards.h b/drivers/staging/generic_serial/sxboards.h
index 427927dc7dbf..427927dc7dbf 100644
--- a/drivers/char/sxboards.h
+++ b/drivers/staging/generic_serial/sxboards.h
diff --git a/drivers/char/sxwindow.h b/drivers/staging/generic_serial/sxwindow.h
index cf01b662aefc..cf01b662aefc 100644
--- a/drivers/char/sxwindow.h
+++ b/drivers/staging/generic_serial/sxwindow.h
diff --git a/drivers/char/vme_scc.c b/drivers/staging/generic_serial/vme_scc.c
index 12de1202d22c..96838640f575 100644
--- a/drivers/char/vme_scc.c
+++ b/drivers/staging/generic_serial/vme_scc.c
@@ -75,7 +75,7 @@ static void scc_hungup(void  *ptr);
 static void scc_close(void  *ptr);
 static int scc_chars_in_buffer(void * ptr);
 static int scc_open(struct tty_struct * tty, struct file * filp);
-static int scc_ioctl(struct tty_struct * tty, struct file * filp,
+static int scc_ioctl(struct tty_struct * tty,
                      unsigned int cmd, unsigned long arg);
 static void scc_throttle(struct tty_struct *tty);
 static void scc_unthrottle(struct tty_struct *tty);
@@ -1046,7 +1046,7 @@ static void scc_unthrottle (struct tty_struct * tty)
 }
 
 
-static int scc_ioctl(struct tty_struct *tty, struct file *file,
+static int scc_ioctl(struct tty_struct *tty,
 		     unsigned int cmd, unsigned long arg)
 {
 	return -ENOIOCTLCMD;
diff --git a/drivers/staging/quatech_usb2/quatech_usb2.c b/drivers/staging/quatech_usb2/quatech_usb2.c
index ed58f482c963..36b18e302718 100644
--- a/drivers/staging/quatech_usb2/quatech_usb2.c
+++ b/drivers/staging/quatech_usb2/quatech_usb2.c
@@ -852,7 +852,7 @@ static int qt2_chars_in_buffer(struct tty_struct *tty)
  * TIOCMGET and TIOCMSET are filtered off to their own methods before they get
  * here, so we don't have to handle them.
  */
-static int qt2_ioctl(struct tty_struct *tty, struct file *file,
+static int qt2_ioctl(struct tty_struct *tty,
 		     unsigned int cmd, unsigned long arg)
 {
 	struct usb_serial_port *port = tty->driver_data;
@@ -1078,7 +1078,7 @@ static void qt2_set_termios(struct tty_struct *tty,
 	}
 }
 
-static int qt2_tiocmget(struct tty_struct *tty, struct file *file)
+static int qt2_tiocmget(struct tty_struct *tty)
 {
 	struct usb_serial_port *port = tty->driver_data;
 	struct usb_serial *serial = port->serial;
@@ -1121,7 +1121,7 @@ static int qt2_tiocmget(struct tty_struct *tty, struct file *file)
 	}
 }
 
-static int qt2_tiocmset(struct tty_struct *tty, struct file *file,
+static int qt2_tiocmset(struct tty_struct *tty,
 		       unsigned int set, unsigned int clear)
 {
 	struct usb_serial_port *port = tty->driver_data;
diff --git a/drivers/staging/serqt_usb2/serqt_usb2.c b/drivers/staging/serqt_usb2/serqt_usb2.c
index 27841ef6a568..e0aae86a8809 100644
--- a/drivers/staging/serqt_usb2/serqt_usb2.c
+++ b/drivers/staging/serqt_usb2/serqt_usb2.c
@@ -1191,7 +1191,7 @@ static int qt_write_room(struct tty_struct *tty)
 
 }
 
-static int qt_ioctl(struct tty_struct *tty, struct file *file,
+static int qt_ioctl(struct tty_struct *tty,
 		    unsigned int cmd, unsigned long arg)
 {
 	struct usb_serial_port *port = tty->driver_data;
@@ -1383,7 +1383,7 @@ static void qt_break(struct tty_struct *tty, int break_state)
 
 static inline int qt_real_tiocmget(struct tty_struct *tty,
 				   struct usb_serial_port *port,
-				   struct file *file, struct usb_serial *serial)
+				   struct usb_serial *serial)
 {
 
 	u8 mcr;
@@ -1425,7 +1425,6 @@ static inline int qt_real_tiocmget(struct tty_struct *tty,
 
 static inline int qt_real_tiocmset(struct tty_struct *tty,
 				   struct usb_serial_port *port,
-				   struct file *file,
 				   struct usb_serial *serial,
 				   unsigned int value)
 {
@@ -1462,7 +1461,7 @@ static inline int qt_real_tiocmset(struct tty_struct *tty,
 		return 0;
 }
 
-static int qt_tiocmget(struct tty_struct *tty, struct file *file)
+static int qt_tiocmget(struct tty_struct *tty)
 {
 	struct usb_serial_port *port = tty->driver_data;
 	struct usb_serial *serial = get_usb_serial(port, __func__);
@@ -1480,13 +1479,13 @@ static int qt_tiocmget(struct tty_struct *tty, struct file *file)
 	dbg("%s - port %d\n", __func__, port->number);
 	dbg("%s - port->RxHolding = %d\n", __func__, qt_port->RxHolding);
 
-	retval = qt_real_tiocmget(tty, port, file, serial);
+	retval = qt_real_tiocmget(tty, port, serial);
 
 	spin_unlock_irqrestore(&qt_port->lock, flags);
 	return retval;
 }
 
-static int qt_tiocmset(struct tty_struct *tty, struct file *file,
+static int qt_tiocmset(struct tty_struct *tty,
 		       unsigned int set, unsigned int clear)
 {
 
@@ -1506,7 +1505,7 @@ static int qt_tiocmset(struct tty_struct *tty, struct file *file,
 	dbg("%s - port %d\n", __func__, port->number);
 	dbg("%s - qt_port->RxHolding = %d\n", __func__, qt_port->RxHolding);
 
-	retval = qt_real_tiocmset(tty, port, file, serial, set);
+	retval = qt_real_tiocmset(tty, port, serial, set);
 
 	spin_unlock_irqrestore(&qt_port->lock, flags);
 	return retval;
diff --git a/drivers/staging/tty/Kconfig b/drivers/staging/tty/Kconfig
new file mode 100644
index 000000000000..77103a07abbd
--- /dev/null
+++ b/drivers/staging/tty/Kconfig
@@ -0,0 +1,87 @@
+config STALLION
+	tristate "Stallion EasyIO or EC8/32 support"
+	depends on STALDRV && (ISA || EISA || PCI)
+	help
+	  If you have an EasyIO or EasyConnection 8/32 multiport Stallion
+	  card, then this is for you; say Y.  Make sure to read
+	  <file:Documentation/serial/stallion.txt>.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called stallion.
+
+config ISTALLION
+	tristate "Stallion EC8/64, ONboard, Brumby support"
+	depends on STALDRV && (ISA || EISA || PCI)
+	help
+	  If you have an EasyConnection 8/64, ONboard, Brumby or Stallion
+	  serial multiport card, say Y here. Make sure to read
+	  <file:Documentation/serial/stallion.txt>.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called istallion.
+
+config DIGIEPCA
+	tristate "Digiboard Intelligent Async Support"
+	depends on SERIAL_NONSTANDARD && (ISA || EISA || PCI)
+	---help---
+	  This is a driver for Digi International's Xx, Xeve, and Xem series
+	  of cards which provide multiple serial ports. You would need
+	  something like this to connect more than two modems to your Linux
+	  box, for instance in order to become a dial-in server. This driver
+	  supports the original PC (ISA) boards as well as PCI, and EISA. If
+	  you have a card like this, say Y here and read the file
+	  <file:Documentation/serial/digiepca.txt>.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called epca.
+
+config RISCOM8
+	tristate "SDL RISCom/8 card support"
+	depends on SERIAL_NONSTANDARD
+	help
+	  This is a driver for the SDL Communications RISCom/8 multiport card,
+	  which gives you many serial ports. You would need something like
+	  this to connect more than two modems to your Linux box, for instance
+	  in order to become a dial-in server. If you have a card like that,
+	  say Y here and read the file <file:Documentation/serial/riscom8.txt>.
+
+	  Also it's possible to say M here and compile this driver as kernel
+	  loadable module; the module will be called riscom8.
+
+config SPECIALIX
+	tristate "Specialix IO8+ card support"
+	depends on SERIAL_NONSTANDARD
+	help
+	  This is a driver for the Specialix IO8+ multiport card (both the
+	  ISA and the PCI version) which gives you many serial ports. You
+	  would need something like this to connect more than two modems to
+	  your Linux box, for instance in order to become a dial-in server.
+
+	  If you have a card like that, say Y here and read the file
+	  <file:Documentation/serial/specialix.txt>. Also it's possible to say
+	  M here and compile this driver as kernel loadable module which will be
+	  called specialix.
+
+config COMPUTONE
+	tristate "Computone IntelliPort Plus serial support"
+	depends on SERIAL_NONSTANDARD && (ISA || EISA || PCI)
+	---help---
+	  This driver supports the entire family of Intelliport II/Plus
+	  controllers with the exception of the MicroChannel controllers and
+	  products previous to the Intelliport II. These are multiport cards,
+	  which give you many serial ports. You would need something like this
+	  to connect more than two modems to your Linux box, for instance in
+	  order to become a dial-in server. If you have a card like that, say
+	  Y here and read <file:Documentation/serial/computone.txt>.
+
+	  To compile this driver as module, choose M here: the
+	  module will be called ip2.
+
+config SERIAL167
+	bool "CD2401 support for MVME166/7 serial ports"
+	depends on MVME16x
+	help
+	  This is the driver for the serial ports on the Motorola MVME166,
+	  167, and 172 boards.  Everyone using one of these boards should say
+	  Y here.
+
diff --git a/drivers/staging/tty/Makefile b/drivers/staging/tty/Makefile
new file mode 100644
index 000000000000..ac57c105611b
--- /dev/null
+++ b/drivers/staging/tty/Makefile
@@ -0,0 +1,7 @@
+obj-$(CONFIG_STALLION)		+= stallion.o
+obj-$(CONFIG_ISTALLION)		+= istallion.o
+obj-$(CONFIG_DIGIEPCA)		+= epca.o
+obj-$(CONFIG_SERIAL167)		+= serial167.o
+obj-$(CONFIG_SPECIALIX)		+= specialix.o
+obj-$(CONFIG_RISCOM8)		+= riscom8.o
+obj-$(CONFIG_COMPUTONE)		+= ip2/
diff --git a/drivers/staging/tty/TODO b/drivers/staging/tty/TODO
new file mode 100644
index 000000000000..88756453ac6c
--- /dev/null
+++ b/drivers/staging/tty/TODO
@@ -0,0 +1,6 @@
+These are a few tty/serial drivers that either do not build,
+or work if they do build, or if they seem to work, are for obsolete
+hardware, or are full of unfixable races and no one uses them anymore.
+
+If no one steps up to adopt any of these drivers, they will be removed
+in the 2.6.41 release.
diff --git a/drivers/char/cd1865.h b/drivers/staging/tty/cd1865.h
index 9940966e7a1d..9940966e7a1d 100644
--- a/drivers/char/cd1865.h
+++ b/drivers/staging/tty/cd1865.h
diff --git a/drivers/char/digi1.h b/drivers/staging/tty/digi1.h
index 94d4eab5d3ca..94d4eab5d3ca 100644
--- a/drivers/char/digi1.h
+++ b/drivers/staging/tty/digi1.h
diff --git a/drivers/char/digiFep1.h b/drivers/staging/tty/digiFep1.h
index 3c1f1922c798..3c1f1922c798 100644
--- a/drivers/char/digiFep1.h
+++ b/drivers/staging/tty/digiFep1.h
diff --git a/drivers/char/digiPCI.h b/drivers/staging/tty/digiPCI.h
index 6ca7819e5069..6ca7819e5069 100644
--- a/drivers/char/digiPCI.h
+++ b/drivers/staging/tty/digiPCI.h
diff --git a/drivers/char/epca.c b/drivers/staging/tty/epca.c
index d9df46aa0fba..7ad3638967ae 100644
--- a/drivers/char/epca.c
+++ b/drivers/staging/tty/epca.c
@@ -175,9 +175,9 @@ static unsigned termios2digi_i(struct channel *ch, unsigned);
 static unsigned termios2digi_c(struct channel *ch, unsigned);
 static void epcaparam(struct tty_struct *, struct channel *);
 static void receive_data(struct channel *, struct tty_struct *tty);
-static int pc_ioctl(struct tty_struct *, struct file *,
+static int pc_ioctl(struct tty_struct *,
 			unsigned int, unsigned long);
-static int info_ioctl(struct tty_struct *, struct file *,
+static int info_ioctl(struct tty_struct *,
 			unsigned int, unsigned long);
 static void pc_set_termios(struct tty_struct *, struct ktermios *);
 static void do_softint(struct work_struct *work);
@@ -1919,7 +1919,7 @@ static void receive_data(struct channel *ch, struct tty_struct *tty)
 	tty_schedule_flip(tty);
 }
 
-static int info_ioctl(struct tty_struct *tty, struct file *file,
+static int info_ioctl(struct tty_struct *tty,
 		    unsigned int cmd, unsigned long arg)
 {
 	switch (cmd) {
@@ -1982,7 +1982,7 @@ static int info_ioctl(struct tty_struct *tty, struct file *file,
 	return 0;
 }
 
-static int pc_tiocmget(struct tty_struct *tty, struct file *file)
+static int pc_tiocmget(struct tty_struct *tty)
 {
 	struct channel *ch = tty->driver_data;
 	struct board_chan __iomem *bc;
@@ -2015,7 +2015,7 @@ static int pc_tiocmget(struct tty_struct *tty, struct file *file)
 	return mflag;
 }
 
-static int pc_tiocmset(struct tty_struct *tty, struct file *file,
+static int pc_tiocmset(struct tty_struct *tty,
 		       unsigned int set, unsigned int clear)
 {
 	struct channel *ch = tty->driver_data;
@@ -2057,7 +2057,7 @@ static int pc_tiocmset(struct tty_struct *tty, struct file *file,
 	return 0;
 }
 
-static int pc_ioctl(struct tty_struct *tty, struct file *file,
+static int pc_ioctl(struct tty_struct *tty,
 					unsigned int cmd, unsigned long arg)
 {
 	digiflow_t dflow;
@@ -2074,14 +2074,14 @@ static int pc_ioctl(struct tty_struct *tty, struct file *file,
 		return -EINVAL;
 	switch (cmd) {
 	case TIOCMODG:
-		mflag = pc_tiocmget(tty, file);
+		mflag = pc_tiocmget(tty);
 		if (put_user(mflag, (unsigned long __user *)argp))
 			return -EFAULT;
 		break;
 	case TIOCMODS:
 		if (get_user(mstat, (unsigned __user *)argp))
 			return -EFAULT;
-		return pc_tiocmset(tty, file, mstat, ~mstat);
+		return pc_tiocmset(tty, mstat, ~mstat);
 	case TIOCSDTR:
 		spin_lock_irqsave(&epca_lock, flags);
 		ch->omodem |= ch->m_dtr;
diff --git a/drivers/char/epca.h b/drivers/staging/tty/epca.h
index d414bf2dbf7c..d414bf2dbf7c 100644
--- a/drivers/char/epca.h
+++ b/drivers/staging/tty/epca.h
diff --git a/drivers/char/epcaconfig.h b/drivers/staging/tty/epcaconfig.h
index 55dec067078e..55dec067078e 100644
--- a/drivers/char/epcaconfig.h
+++ b/drivers/staging/tty/epcaconfig.h
diff --git a/drivers/char/ip2/Makefile b/drivers/staging/tty/ip2/Makefile
index 7b78e0dfc5b0..7b78e0dfc5b0 100644
--- a/drivers/char/ip2/Makefile
+++ b/drivers/staging/tty/ip2/Makefile
diff --git a/drivers/char/ip2/i2cmd.c b/drivers/staging/tty/ip2/i2cmd.c
index e7af647800b6..e7af647800b6 100644
--- a/drivers/char/ip2/i2cmd.c
+++ b/drivers/staging/tty/ip2/i2cmd.c
diff --git a/drivers/char/ip2/i2cmd.h b/drivers/staging/tty/ip2/i2cmd.h
index 29277ec6b8ed..29277ec6b8ed 100644
--- a/drivers/char/ip2/i2cmd.h
+++ b/drivers/staging/tty/ip2/i2cmd.h
diff --git a/drivers/char/ip2/i2ellis.c b/drivers/staging/tty/ip2/i2ellis.c
index 29db44de399f..29db44de399f 100644
--- a/drivers/char/ip2/i2ellis.c
+++ b/drivers/staging/tty/ip2/i2ellis.c
diff --git a/drivers/char/ip2/i2ellis.h b/drivers/staging/tty/ip2/i2ellis.h
index fb6df2456018..fb6df2456018 100644
--- a/drivers/char/ip2/i2ellis.h
+++ b/drivers/staging/tty/ip2/i2ellis.h
diff --git a/drivers/char/ip2/i2hw.h b/drivers/staging/tty/ip2/i2hw.h
index c0ba6c05f0cd..c0ba6c05f0cd 100644
--- a/drivers/char/ip2/i2hw.h
+++ b/drivers/staging/tty/ip2/i2hw.h
diff --git a/drivers/char/ip2/i2lib.c b/drivers/staging/tty/ip2/i2lib.c
index 0d10b89218ed..0d10b89218ed 100644
--- a/drivers/char/ip2/i2lib.c
+++ b/drivers/staging/tty/ip2/i2lib.c
diff --git a/drivers/char/ip2/i2lib.h b/drivers/staging/tty/ip2/i2lib.h
index e559e9bac06d..e559e9bac06d 100644
--- a/drivers/char/ip2/i2lib.h
+++ b/drivers/staging/tty/ip2/i2lib.h
diff --git a/drivers/char/ip2/i2pack.h b/drivers/staging/tty/ip2/i2pack.h
index 00342a677c90..00342a677c90 100644
--- a/drivers/char/ip2/i2pack.h
+++ b/drivers/staging/tty/ip2/i2pack.h
diff --git a/drivers/char/ip2/ip2.h b/drivers/staging/tty/ip2/ip2.h
index 936ccc533949..936ccc533949 100644
--- a/drivers/char/ip2/ip2.h
+++ b/drivers/staging/tty/ip2/ip2.h
diff --git a/drivers/char/ip2/ip2ioctl.h b/drivers/staging/tty/ip2/ip2ioctl.h
index aa0a9da85e05..aa0a9da85e05 100644
--- a/drivers/char/ip2/ip2ioctl.h
+++ b/drivers/staging/tty/ip2/ip2ioctl.h
diff --git a/drivers/char/ip2/ip2main.c b/drivers/staging/tty/ip2/ip2main.c
index c3a025356b8b..ea7a8fb08283 100644
--- a/drivers/char/ip2/ip2main.c
+++ b/drivers/staging/tty/ip2/ip2main.c
@@ -173,7 +173,7 @@ static void ip2_flush_chars(PTTY);
 static int  ip2_write_room(PTTY);
 static int  ip2_chars_in_buf(PTTY);
 static void ip2_flush_buffer(PTTY);
-static int  ip2_ioctl(PTTY, struct file *, UINT, ULONG);
+static int  ip2_ioctl(PTTY, UINT, ULONG);
 static void ip2_set_termios(PTTY, struct ktermios *);
 static void ip2_set_line_discipline(PTTY);
 static void ip2_throttle(PTTY);
@@ -181,8 +181,8 @@ static void ip2_unthrottle(PTTY);
 static void ip2_stop(PTTY);
 static void ip2_start(PTTY);
 static void ip2_hangup(PTTY);
-static int  ip2_tiocmget(struct tty_struct *tty, struct file *file);
-static int  ip2_tiocmset(struct tty_struct *tty, struct file *file,
+static int  ip2_tiocmget(struct tty_struct *tty);
+static int  ip2_tiocmset(struct tty_struct *tty,
 			 unsigned int set, unsigned int clear);
 static int ip2_get_icount(struct tty_struct *tty,
 		struct serial_icounter_struct *icount);
@@ -2038,7 +2038,7 @@ ip2_stop ( PTTY tty )
 /* Device Ioctl Section                                                       */
 /******************************************************************************/
 
-static int ip2_tiocmget(struct tty_struct *tty, struct file *file)
+static int ip2_tiocmget(struct tty_struct *tty)
 {
 	i2ChanStrPtr pCh = DevTable[tty->index];
 #ifdef	ENABLE_DSSNOW
@@ -2085,7 +2085,7 @@ static int ip2_tiocmget(struct tty_struct *tty, struct file *file)
 	      | ((pCh->dataSetIn  & I2_CTS) ? TIOCM_CTS : 0);
 }
 
-static int ip2_tiocmset(struct tty_struct *tty, struct file *file,
+static int ip2_tiocmset(struct tty_struct *tty,
 			unsigned int set, unsigned int clear)
 {
 	i2ChanStrPtr pCh = DevTable[tty->index];
@@ -2127,7 +2127,7 @@ static int ip2_tiocmset(struct tty_struct *tty, struct file *file,
 /*                                                                            */
 /******************************************************************************/
 static int
-ip2_ioctl ( PTTY tty, struct file *pFile, UINT cmd, ULONG arg )
+ip2_ioctl ( PTTY tty, UINT cmd, ULONG arg )
 {
 	wait_queue_t wait;
 	i2ChanStrPtr pCh = DevTable[tty->index];
diff --git a/drivers/char/ip2/ip2trace.h b/drivers/staging/tty/ip2/ip2trace.h
index da20435dc8a6..da20435dc8a6 100644
--- a/drivers/char/ip2/ip2trace.h
+++ b/drivers/staging/tty/ip2/ip2trace.h
diff --git a/drivers/char/ip2/ip2types.h b/drivers/staging/tty/ip2/ip2types.h
index 9d67b260b2f6..9d67b260b2f6 100644
--- a/drivers/char/ip2/ip2types.h
+++ b/drivers/staging/tty/ip2/ip2types.h
diff --git a/drivers/char/istallion.c b/drivers/staging/tty/istallion.c
index 7c6de4c92458..0b266272cccd 100644
--- a/drivers/char/istallion.c
+++ b/drivers/staging/tty/istallion.c
@@ -603,7 +603,7 @@ static int	stli_putchar(struct tty_struct *tty, unsigned char ch);
 static void	stli_flushchars(struct tty_struct *tty);
 static int	stli_writeroom(struct tty_struct *tty);
 static int	stli_charsinbuffer(struct tty_struct *tty);
-static int	stli_ioctl(struct tty_struct *tty, struct file *file, unsigned int cmd, unsigned long arg);
+static int	stli_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg);
 static void	stli_settermios(struct tty_struct *tty, struct ktermios *old);
 static void	stli_throttle(struct tty_struct *tty);
 static void	stli_unthrottle(struct tty_struct *tty);
@@ -1501,7 +1501,7 @@ static int stli_setserial(struct tty_struct *tty, struct serial_struct __user *s
 
 /*****************************************************************************/
 
-static int stli_tiocmget(struct tty_struct *tty, struct file *file)
+static int stli_tiocmget(struct tty_struct *tty)
 {
 	struct stliport *portp = tty->driver_data;
 	struct stlibrd *brdp;
@@ -1524,7 +1524,7 @@ static int stli_tiocmget(struct tty_struct *tty, struct file *file)
 	return stli_mktiocm(portp->asig.sigvalue);
 }
 
-static int stli_tiocmset(struct tty_struct *tty, struct file *file,
+static int stli_tiocmset(struct tty_struct *tty,
 			 unsigned int set, unsigned int clear)
 {
 	struct stliport *portp = tty->driver_data;
@@ -1556,7 +1556,7 @@ static int stli_tiocmset(struct tty_struct *tty, struct file *file,
 			    sizeof(asysigs_t), 0);
 }
 
-static int stli_ioctl(struct tty_struct *tty, struct file *file, unsigned int cmd, unsigned long arg)
+static int stli_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg)
 {
 	struct stliport *portp;
 	struct stlibrd *brdp;
diff --git a/drivers/char/riscom8.c b/drivers/staging/tty/riscom8.c
index af4de1fe8445..602643a40b4b 100644
--- a/drivers/char/riscom8.c
+++ b/drivers/staging/tty/riscom8.c
@@ -1086,7 +1086,7 @@ static int rc_chars_in_buffer(struct tty_struct *tty)
 	return port->xmit_cnt;
 }
 
-static int rc_tiocmget(struct tty_struct *tty, struct file *file)
+static int rc_tiocmget(struct tty_struct *tty)
 {
 	struct riscom_port *port = tty->driver_data;
 	struct riscom_board *bp;
@@ -1115,8 +1115,8 @@ static int rc_tiocmget(struct tty_struct *tty, struct file *file)
 	return result;
 }
 
-static int rc_tiocmset(struct tty_struct *tty, struct file *file,
-		       unsigned int set, unsigned int clear)
+static int rc_tiocmset(struct tty_struct *tty,
+				       unsigned int set, unsigned int clear)
 {
 	struct riscom_port *port = tty->driver_data;
 	unsigned long flags;
@@ -1236,7 +1236,7 @@ static int rc_get_serial_info(struct riscom_port *port,
 	return copy_to_user(retinfo, &tmp, sizeof(tmp)) ? -EFAULT : 0;
 }
 
-static int rc_ioctl(struct tty_struct *tty, struct file *filp,
+static int rc_ioctl(struct tty_struct *tty,
 		    unsigned int cmd, unsigned long arg)
 {
 	struct riscom_port *port = tty->driver_data;
diff --git a/drivers/char/riscom8.h b/drivers/staging/tty/riscom8.h
index c9876b3f9714..c9876b3f9714 100644
--- a/drivers/char/riscom8.h
+++ b/drivers/staging/tty/riscom8.h
diff --git a/drivers/char/riscom8_reg.h b/drivers/staging/tty/riscom8_reg.h
index a32475ed0d18..a32475ed0d18 100644
--- a/drivers/char/riscom8_reg.h
+++ b/drivers/staging/tty/riscom8_reg.h
diff --git a/drivers/char/serial167.c b/drivers/staging/tty/serial167.c
index 748c3b0ecd89..674af6933978 100644
--- a/drivers/char/serial167.c
+++ b/drivers/staging/tty/serial167.c
@@ -1308,7 +1308,7 @@ check_and_exit:
 	return startup(info);
 }				/* set_serial_info */
 
-static int cy_tiocmget(struct tty_struct *tty, struct file *file)
+static int cy_tiocmget(struct tty_struct *tty)
 {
 	struct cyclades_port *info = tty->driver_data;
 	int channel;
@@ -1331,8 +1331,7 @@ static int cy_tiocmget(struct tty_struct *tty, struct file *file)
 }				/* cy_tiocmget */
 
 static int
-cy_tiocmset(struct tty_struct *tty, struct file *file,
-	    unsigned int set, unsigned int clear)
+cy_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear)
 {
 	struct cyclades_port *info = tty->driver_data;
 	int channel;
@@ -1493,7 +1492,7 @@ get_default_timeout(struct cyclades_port *info, unsigned long __user * value)
 }
 
 static int
-cy_ioctl(struct tty_struct *tty, struct file *file,
+cy_ioctl(struct tty_struct *tty,
 	 unsigned int cmd, unsigned long arg)
 {
 	struct cyclades_port *info = tty->driver_data;
diff --git a/drivers/char/specialix.c b/drivers/staging/tty/specialix.c
index c2bca3f25ef3..47e5753f732a 100644
--- a/drivers/char/specialix.c
+++ b/drivers/staging/tty/specialix.c
@@ -1737,7 +1737,7 @@ static int sx_chars_in_buffer(struct tty_struct *tty)
 	return port->xmit_cnt;
 }
 
-static int sx_tiocmget(struct tty_struct *tty, struct file *file)
+static int sx_tiocmget(struct tty_struct *tty)
 {
 	struct specialix_port *port = tty->driver_data;
 	struct specialix_board *bp;
@@ -1778,7 +1778,7 @@ static int sx_tiocmget(struct tty_struct *tty, struct file *file)
 }
 
 
-static int sx_tiocmset(struct tty_struct *tty, struct file *file,
+static int sx_tiocmset(struct tty_struct *tty,
 		       unsigned int set, unsigned int clear)
 {
 	struct specialix_port *port = tty->driver_data;
@@ -1928,7 +1928,7 @@ static int sx_get_serial_info(struct specialix_port *port,
 }
 
 
-static int sx_ioctl(struct tty_struct *tty, struct file *filp,
+static int sx_ioctl(struct tty_struct *tty,
 				unsigned int cmd, unsigned long arg)
 {
 	struct specialix_port *port = tty->driver_data;
diff --git a/drivers/char/specialix_io8.h b/drivers/staging/tty/specialix_io8.h
index c63005274d9b..c63005274d9b 100644
--- a/drivers/char/specialix_io8.h
+++ b/drivers/staging/tty/specialix_io8.h
diff --git a/drivers/char/stallion.c b/drivers/staging/tty/stallion.c
index 461a5a045517..4fff5cd3b163 100644
--- a/drivers/char/stallion.c
+++ b/drivers/staging/tty/stallion.c
@@ -1094,7 +1094,7 @@ static int stl_setserial(struct tty_struct *tty, struct serial_struct __user *sp
 
 /*****************************************************************************/
 
-static int stl_tiocmget(struct tty_struct *tty, struct file *file)
+static int stl_tiocmget(struct tty_struct *tty)
 {
 	struct stlport	*portp;
 
@@ -1107,7 +1107,7 @@ static int stl_tiocmget(struct tty_struct *tty, struct file *file)
 	return stl_getsignals(portp);
 }
 
-static int stl_tiocmset(struct tty_struct *tty, struct file *file,
+static int stl_tiocmset(struct tty_struct *tty,
 			unsigned int set, unsigned int clear)
 {
 	struct stlport	*portp;
@@ -1132,14 +1132,13 @@ static int stl_tiocmset(struct tty_struct *tty, struct file *file,
 	return 0;
 }
 
-static int stl_ioctl(struct tty_struct *tty, struct file *file, unsigned int cmd, unsigned long arg)
+static int stl_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg)
 {
 	struct stlport	*portp;
 	int		rc;
 	void __user *argp = (void __user *)arg;
 
-	pr_debug("stl_ioctl(tty=%p,file=%p,cmd=%x,arg=%lx)\n", tty, file, cmd,
-			arg);
+	pr_debug("stl_ioctl(tty=%p,cmd=%x,arg=%lx)\n", tty, cmd, arg);
 
 	portp = tty->driver_data;
 	if (portp == NULL)
diff --git a/drivers/tty/Kconfig b/drivers/tty/Kconfig
new file mode 100644
index 000000000000..3fd7199301b6
--- /dev/null
+++ b/drivers/tty/Kconfig
@@ -0,0 +1,321 @@
+config VT
+	bool "Virtual terminal" if EXPERT
+	depends on !S390
+	select INPUT
+	default y
+	---help---
+	  If you say Y here, you will get support for terminal devices with
+	  display and keyboard devices. These are called "virtual" because you
+	  can run several virtual terminals (also called virtual consoles) on
+	  one physical terminal. This is rather useful, for example one
+	  virtual terminal can collect system messages and warnings, another
+	  one can be used for a text-mode user session, and a third could run
+	  an X session, all in parallel. Switching between virtual terminals
+	  is done with certain key combinations, usually Alt-<function key>.
+
+	  The setterm command ("man setterm") can be used to change the
+	  properties (such as colors or beeping) of a virtual terminal. The
+	  man page console_codes(4) ("man console_codes") contains the special
+	  character sequences that can be used to change those properties
+	  directly. The fonts used on virtual terminals can be changed with
+	  the setfont ("man setfont") command and the key bindings are defined
+	  with the loadkeys ("man loadkeys") command.
+
+	  You need at least one virtual terminal device in order to make use
+	  of your keyboard and monitor. Therefore, only people configuring an
+	  embedded system would want to say N here in order to save some
+	  memory; the only way to log into such a system is then via a serial
+	  or network connection.
+
+	  If unsure, say Y, or else you won't be able to do much with your new
+	  shiny Linux system :-)
+
+config CONSOLE_TRANSLATIONS
+	depends on VT
+	default y
+	bool "Enable character translations in console" if EXPERT
+	---help---
+	  This enables support for font mapping and Unicode translation
+	  on virtual consoles.
+
+config VT_CONSOLE
+	bool "Support for console on virtual terminal" if EXPERT
+	depends on VT
+	default y
+	---help---
+	  The system console is the device which receives all kernel messages
+	  and warnings and which allows logins in single user mode. If you
+	  answer Y here, a virtual terminal (the device used to interact with
+	  a physical terminal) can be used as system console. This is the most
+	  common mode of operations, so you should say Y here unless you want
+	  the kernel messages be output only to a serial port (in which case
+	  you should say Y to "Console on serial port", below).
+
+	  If you do say Y here, by default the currently visible virtual
+	  terminal (/dev/tty0) will be used as system console. You can change
+	  that with a kernel command line option such as "console=tty3" which
+	  would use the third virtual terminal as system console. (Try "man
+	  bootparam" or see the documentation of your boot loader (lilo or
+	  loadlin) about how to pass options to the kernel at boot time.)
+
+	  If unsure, say Y.
+
+config HW_CONSOLE
+	bool
+	depends on VT && !S390 && !UML
+	default y
+
+config VT_HW_CONSOLE_BINDING
+       bool "Support for binding and unbinding console drivers"
+       depends on HW_CONSOLE
+       default n
+       ---help---
+         The virtual terminal is the device that interacts with the physical
+         terminal through console drivers. On these systems, at least one
+         console driver is loaded. In other configurations, additional console
+         drivers may be enabled, such as the framebuffer console. If more than
+         1 console driver is enabled, setting this to 'y' will allow you to
+         select the console driver that will serve as the backend for the
+         virtual terminals.
+
+	 See <file:Documentation/console/console.txt> for more
+	 information. For framebuffer console users, please refer to
+	 <file:Documentation/fb/fbcon.txt>.
+
+config UNIX98_PTYS
+	bool "Unix98 PTY support" if EXPERT
+	default y
+	---help---
+	  A pseudo terminal (PTY) is a software device consisting of two
+	  halves: a master and a slave. The slave device behaves identical to
+	  a physical terminal; the master device is used by a process to
+	  read data from and write data to the slave, thereby emulating a
+	  terminal. Typical programs for the master side are telnet servers
+	  and xterms.
+
+	  Linux has traditionally used the BSD-like names /dev/ptyxx for
+	  masters and /dev/ttyxx for slaves of pseudo terminals. This scheme
+	  has a number of problems. The GNU C library glibc 2.1 and later,
+	  however, supports the Unix98 naming standard: in order to acquire a
+	  pseudo terminal, a process opens /dev/ptmx; the number of the pseudo
+	  terminal is then made available to the process and the pseudo
+	  terminal slave can be accessed as /dev/pts/<number>. What was
+	  traditionally /dev/ttyp2 will then be /dev/pts/2, for example.
+
+	  All modern Linux systems use the Unix98 ptys.  Say Y unless
+	  you're on an embedded system and want to conserve memory.
+
+config DEVPTS_MULTIPLE_INSTANCES
+	bool "Support multiple instances of devpts"
+	depends on UNIX98_PTYS
+	default n
+	---help---
+	  Enable support for multiple instances of devpts filesystem.
+	  If you want to have isolated PTY namespaces (eg: in containers),
+	  say Y here.  Otherwise, say N. If enabled, each mount of devpts
+	  filesystem with the '-o newinstance' option will create an
+	  independent PTY namespace.
+
+config LEGACY_PTYS
+	bool "Legacy (BSD) PTY support"
+	default y
+	---help---
+	  A pseudo terminal (PTY) is a software device consisting of two
+	  halves: a master and a slave. The slave device behaves identical to
+	  a physical terminal; the master device is used by a process to
+	  read data from and write data to the slave, thereby emulating a
+	  terminal. Typical programs for the master side are telnet servers
+	  and xterms.
+
+	  Linux has traditionally used the BSD-like names /dev/ptyxx
+	  for masters and /dev/ttyxx for slaves of pseudo
+	  terminals. This scheme has a number of problems, including
+	  security.  This option enables these legacy devices; on most
+	  systems, it is safe to say N.
+
+
+config LEGACY_PTY_COUNT
+	int "Maximum number of legacy PTY in use"
+	depends on LEGACY_PTYS
+	range 0 256
+	default "256"
+	---help---
+	  The maximum number of legacy PTYs that can be used at any one time.
+	  The default is 256, and should be more than enough.  Embedded
+	  systems may want to reduce this to save memory.
+
+	  When not in use, each legacy PTY occupies 12 bytes on 32-bit
+	  architectures and 24 bytes on 64-bit architectures.
+
+config BFIN_JTAG_COMM
+	tristate "Blackfin JTAG Communication"
+	depends on BLACKFIN
+	help
+	  Add support for emulating a TTY device over the Blackfin JTAG.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called bfin_jtag_comm.
+
+config BFIN_JTAG_COMM_CONSOLE
+	bool "Console on Blackfin JTAG"
+	depends on BFIN_JTAG_COMM=y
+
+config SERIAL_NONSTANDARD
+	bool "Non-standard serial port support"
+	depends on HAS_IOMEM
+	---help---
+	  Say Y here if you have any non-standard serial boards -- boards
+	  which aren't supported using the standard "dumb" serial driver.
+	  This includes intelligent serial boards such as Cyclades,
+	  Digiboards, etc. These are usually used for systems that need many
+	  serial ports because they serve many terminals or dial-in
+	  connections.
+
+	  Note that the answer to this question won't directly affect the
+	  kernel: saying N will just cause the configurator to skip all
+	  the questions about non-standard serial boards.
+
+	  Most people can say N here.
+
+config ROCKETPORT
+	tristate "Comtrol RocketPort support"
+	depends on SERIAL_NONSTANDARD && (ISA || EISA || PCI)
+	help
+	  This driver supports Comtrol RocketPort and RocketModem PCI boards.   
+          These boards provide 2, 4, 8, 16, or 32 high-speed serial ports or
+          modems.  For information about the RocketPort/RocketModem  boards
+          and this driver read <file:Documentation/serial/rocket.txt>.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called rocket.
+
+	  If you want to compile this driver into the kernel, say Y here.  If
+          you don't have a Comtrol RocketPort/RocketModem card installed, say N.
+
+config CYCLADES
+	tristate "Cyclades async mux support"
+	depends on SERIAL_NONSTANDARD && (PCI || ISA)
+	select FW_LOADER
+	---help---
+	  This driver supports Cyclades Z and Y multiserial boards.
+	  You would need something like this to connect more than two modems to
+	  your Linux box, for instance in order to become a dial-in server.
+
+	  For information about the Cyclades-Z card, read
+	  <file:Documentation/serial/README.cycladesZ>.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called cyclades.
+
+	  If you haven't heard about it, it's safe to say N.
+
+config CYZ_INTR
+	bool "Cyclades-Z interrupt mode operation (EXPERIMENTAL)"
+	depends on EXPERIMENTAL && CYCLADES
+	help
+	  The Cyclades-Z family of multiport cards allows 2 (two) driver op
+	  modes: polling and interrupt. In polling mode, the driver will check
+	  the status of the Cyclades-Z ports every certain amount of time
+	  (which is called polling cycle and is configurable). In interrupt
+	  mode, it will use an interrupt line (IRQ) in order to check the
+	  status of the Cyclades-Z ports. The default op mode is polling. If
+	  unsure, say N.
+
+config MOXA_INTELLIO
+	tristate "Moxa Intellio support"
+	depends on SERIAL_NONSTANDARD && (ISA || EISA || PCI)
+	select FW_LOADER
+	help
+	  Say Y here if you have a Moxa Intellio multiport serial card.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called moxa.
+
+config MOXA_SMARTIO
+	tristate "Moxa SmartIO support v. 2.0"
+	depends on SERIAL_NONSTANDARD && (PCI || EISA || ISA)
+	help
+	  Say Y here if you have a Moxa SmartIO multiport serial card and/or
+	  want to help develop a new version of this driver.
+
+	  This is upgraded (1.9.1) driver from original Moxa drivers with
+	  changes finally resulting in PCI probing.
+
+	  This driver can also be built as a module. The module will be called
+	  mxser. If you want to do that, say M here.
+
+config SYNCLINK
+	tristate "Microgate SyncLink card support"
+	depends on SERIAL_NONSTANDARD && PCI && ISA_DMA_API
+	help
+	  Provides support for the SyncLink ISA and PCI multiprotocol serial
+	  adapters. These adapters support asynchronous and HDLC bit
+	  synchronous communication up to 10Mbps (PCI adapter).
+
+	  This driver can only be built as a module ( = code which can be
+	  inserted in and removed from the running kernel whenever you want).
+	  The module will be called synclink.  If you want to do that, say M
+	  here.
+
+config SYNCLINKMP
+	tristate "SyncLink Multiport support"
+	depends on SERIAL_NONSTANDARD && PCI
+	help
+	  Enable support for the SyncLink Multiport (2 or 4 ports)
+	  serial adapter, running asynchronous and HDLC communications up
+	  to 2.048Mbps. Each ports is independently selectable for
+	  RS-232, V.35, RS-449, RS-530, and X.21
+
+	  This driver may be built as a module ( = code which can be
+	  inserted in and removed from the running kernel whenever you want).
+	  The module will be called synclinkmp.  If you want to do that, say M
+	  here.
+
+config SYNCLINK_GT
+	tristate "SyncLink GT/AC support"
+	depends on SERIAL_NONSTANDARD && PCI
+	help
+	  Support for SyncLink GT and SyncLink AC families of
+	  synchronous and asynchronous serial adapters
+	  manufactured by Microgate Systems, Ltd. (www.microgate.com)
+
+config NOZOMI
+	tristate "HSDPA Broadband Wireless Data Card - Globe Trotter"
+	depends on PCI && EXPERIMENTAL
+	help
+	  If you have a HSDPA driver Broadband Wireless Data Card -
+	  Globe Trotter PCMCIA card, say Y here.
+
+	  To compile this driver as a module, choose M here, the module
+	  will be called nozomi.
+
+config ISI
+	tristate "Multi-Tech multiport card support (EXPERIMENTAL)"
+	depends on SERIAL_NONSTANDARD && PCI
+	select FW_LOADER
+	help
+	  This is a driver for the Multi-Tech cards which provide several
+	  serial ports.  The driver is experimental and can currently only be
+	  built as a module. The module will be called isicom.
+	  If you want to do that, choose M here.
+
+config N_HDLC
+	tristate "HDLC line discipline support"
+	depends on SERIAL_NONSTANDARD
+	help
+	  Allows synchronous HDLC communications with tty device drivers that
+	  support synchronous HDLC such as the Microgate SyncLink adapter.
+
+	  This driver can be built as a module ( = code which can be
+	  inserted in and removed from the running kernel whenever you want).
+	  The module will be called n_hdlc. If you want to do that, say M
+	  here.
+
+config N_GSM
+	tristate "GSM MUX line discipline support (EXPERIMENTAL)"
+	depends on EXPERIMENTAL
+	depends on NET
+	help
+	  This line discipline provides support for the GSM MUX protocol and
+	  presents the mux as a set of 61 individual tty devices.
+
diff --git a/drivers/tty/Makefile b/drivers/tty/Makefile
index 396277216e4f..690522fcb338 100644
--- a/drivers/tty/Makefile
+++ b/drivers/tty/Makefile
@@ -11,3 +11,18 @@ obj-$(CONFIG_R3964)		+= n_r3964.o
 obj-y				+= vt/
 obj-$(CONFIG_HVC_DRIVER)	+= hvc/
 obj-y				+= serial/
+
+# tty drivers
+obj-$(CONFIG_AMIGA_BUILTIN_SERIAL) += amiserial.o
+obj-$(CONFIG_BFIN_JTAG_COMM)	+= bfin_jtag_comm.o
+obj-$(CONFIG_CYCLADES)		+= cyclades.o
+obj-$(CONFIG_ISI)		+= isicom.o
+obj-$(CONFIG_MOXA_INTELLIO)	+= moxa.o
+obj-$(CONFIG_MOXA_SMARTIO)	+= mxser.o
+obj-$(CONFIG_NOZOMI)		+= nozomi.o
+obj-$(CONFIG_ROCKETPORT)	+= rocket.o
+obj-$(CONFIG_SYNCLINK_GT)	+= synclink_gt.o
+obj-$(CONFIG_SYNCLINKMP)	+= synclinkmp.o
+obj-$(CONFIG_SYNCLINK)		+= synclink.o
+
+obj-y += ipwireless/
diff --git a/drivers/char/amiserial.c b/drivers/tty/amiserial.c
index 6ee3348bc3e4..f214e5022472 100644
--- a/drivers/char/amiserial.c
+++ b/drivers/tty/amiserial.c
@@ -1194,7 +1194,7 @@ static int get_lsr_info(struct async_struct * info, unsigned int __user *value)
 }
 
 
-static int rs_tiocmget(struct tty_struct *tty, struct file *file)
+static int rs_tiocmget(struct tty_struct *tty)
 {
 	struct async_struct * info = tty->driver_data;
 	unsigned char control, status;
@@ -1216,8 +1216,8 @@ static int rs_tiocmget(struct tty_struct *tty, struct file *file)
 		| (!(status  & SER_CTS) ? TIOCM_CTS : 0);
 }
 
-static int rs_tiocmset(struct tty_struct *tty, struct file *file,
-		       unsigned int set, unsigned int clear)
+static int rs_tiocmset(struct tty_struct *tty, unsigned int set,
+						unsigned int clear)
 {
 	struct async_struct * info = tty->driver_data;
 	unsigned long flags;
@@ -1293,7 +1293,7 @@ static int rs_get_icount(struct tty_struct *tty,
 	return 0;
 }
 
-static int rs_ioctl(struct tty_struct *tty, struct file * file,
+static int rs_ioctl(struct tty_struct *tty,
 		    unsigned int cmd, unsigned long arg)
 {
 	struct async_struct * info = tty->driver_data;
diff --git a/drivers/char/bfin_jtag_comm.c b/drivers/tty/bfin_jtag_comm.c
index 16402445f2b2..16402445f2b2 100644
--- a/drivers/char/bfin_jtag_comm.c
+++ b/drivers/tty/bfin_jtag_comm.c
diff --git a/drivers/char/cyclades.c b/drivers/tty/cyclades.c
index 4f152c28f40e..c99728f0cd9f 100644
--- a/drivers/char/cyclades.c
+++ b/drivers/tty/cyclades.c
@@ -2429,7 +2429,7 @@ static int get_lsr_info(struct cyclades_port *info, unsigned int __user *value)
 	return put_user(result, (unsigned long __user *)value);
 }
 
-static int cy_tiocmget(struct tty_struct *tty, struct file *file)
+static int cy_tiocmget(struct tty_struct *tty)
 {
 	struct cyclades_port *info = tty->driver_data;
 	struct cyclades_card *card;
@@ -2483,7 +2483,7 @@ end:
 }				/* cy_tiomget */
 
 static int
-cy_tiocmset(struct tty_struct *tty, struct file *file,
+cy_tiocmset(struct tty_struct *tty,
 		unsigned int set, unsigned int clear)
 {
 	struct cyclades_port *info = tty->driver_data;
@@ -2680,7 +2680,7 @@ static int cy_cflags_changed(struct cyclades_port *info, unsigned long arg,
  * not recognized by the driver, it should return ENOIOCTLCMD.
  */
 static int
-cy_ioctl(struct tty_struct *tty, struct file *file,
+cy_ioctl(struct tty_struct *tty,
 	 unsigned int cmd, unsigned long arg)
 {
 	struct cyclades_port *info = tty->driver_data;
diff --git a/drivers/tty/hvc/Kconfig b/drivers/tty/hvc/Kconfig
new file mode 100644
index 000000000000..6f2c9809f1fb
--- /dev/null
+++ b/drivers/tty/hvc/Kconfig
@@ -0,0 +1,105 @@
+config HVC_DRIVER
+	bool
+	help
+	  Generic "hypervisor virtual console" infrastructure for various
+	  hypervisors (pSeries, iSeries, Xen, lguest).
+	  It will automatically be selected if one of the back-end console drivers
+	  is selected.
+
+config HVC_IRQ
+	bool
+
+config HVC_CONSOLE
+	bool "pSeries Hypervisor Virtual Console support"
+	depends on PPC_PSERIES
+	select HVC_DRIVER
+	select HVC_IRQ
+	help
+	  pSeries machines when partitioned support a hypervisor virtual
+	  console. This driver allows each pSeries partition to have a console
+	  which is accessed via the HMC.
+
+config HVC_ISERIES
+	bool "iSeries Hypervisor Virtual Console support"
+	depends on PPC_ISERIES
+	default y
+	select HVC_DRIVER
+	select HVC_IRQ
+	select VIOPATH
+	help
+	  iSeries machines support a hypervisor virtual console.
+
+config HVC_RTAS
+	bool "IBM RTAS Console support"
+	depends on PPC_RTAS
+	select HVC_DRIVER
+	help
+	  IBM Console device driver which makes use of RTAS
+
+config HVC_BEAT
+	bool "Toshiba's Beat Hypervisor Console support"
+	depends on PPC_CELLEB
+	select HVC_DRIVER
+	help
+	  Toshiba's Cell Reference Set Beat Console device driver
+
+config HVC_IUCV
+	bool "z/VM IUCV Hypervisor console support (VM only)"
+	depends on S390
+	select HVC_DRIVER
+	select IUCV
+	default y
+	help
+	  This driver provides a Hypervisor console (HVC) back-end to access
+	  a Linux (console) terminal via a z/VM IUCV communication path.
+
+config HVC_XEN
+	bool "Xen Hypervisor Console support"
+	depends on XEN
+	select HVC_DRIVER
+	select HVC_IRQ
+	default y
+	help
+	  Xen virtual console device driver
+
+config HVC_UDBG
+       bool "udbg based fake hypervisor console"
+       depends on PPC && EXPERIMENTAL
+       select HVC_DRIVER
+       default n
+
+config HVC_DCC
+       bool "ARM JTAG DCC console"
+       depends on ARM
+       select HVC_DRIVER
+       help
+         This console uses the JTAG DCC on ARM to create a console under the HVC
+	 driver. This console is used through a JTAG only on ARM. If you don't have
+	 a JTAG then you probably don't want this option.
+
+config HVC_BFIN_JTAG
+	bool "Blackfin JTAG console"
+	depends on BLACKFIN
+	select HVC_DRIVER
+	help
+	 This console uses the Blackfin JTAG to create a console under the
+	 the HVC driver.  If you don't have JTAG, then you probably don't
+	 want this option.
+
+config HVCS
+	tristate "IBM Hypervisor Virtual Console Server support"
+	depends on PPC_PSERIES && HVC_CONSOLE
+	help
+	  Partitionable IBM Power5 ppc64 machines allow hosting of
+	  firmware virtual consoles from one Linux partition by
+	  another Linux partition.  This driver allows console data
+	  from Linux partitions to be accessed through TTY device
+	  interfaces in the device tree of a Linux partition running
+	  this driver.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called hvcs.  Additionally, this module
+	  will depend on arch specific APIs exported from hvcserver.ko
+	  which will also be compiled when this driver is built as a
+	  module.
+
diff --git a/drivers/tty/hvc/Makefile b/drivers/tty/hvc/Makefile
index d79e7e9bf9d2..40a25d93fe52 100644
--- a/drivers/tty/hvc/Makefile
+++ b/drivers/tty/hvc/Makefile
@@ -9,4 +9,5 @@ obj-$(CONFIG_HVC_IRQ)		+= hvc_irq.o
 obj-$(CONFIG_HVC_XEN)		+= hvc_xen.o
 obj-$(CONFIG_HVC_IUCV)		+= hvc_iucv.o
 obj-$(CONFIG_HVC_UDBG)		+= hvc_udbg.o
+obj-$(CONFIG_HVC_BFIN_JTAG)	+= hvc_bfin_jtag.o
 obj-$(CONFIG_HVCS)		+= hvcs.o
diff --git a/drivers/tty/hvc/hvc_bfin_jtag.c b/drivers/tty/hvc/hvc_bfin_jtag.c
new file mode 100644
index 000000000000..31d6cc6a77af
--- /dev/null
+++ b/drivers/tty/hvc/hvc_bfin_jtag.c
@@ -0,0 +1,105 @@
+/*
+ * Console via Blackfin JTAG Communication
+ *
+ * Copyright 2008-2011 Analog Devices Inc.
+ *
+ * Enter bugs at http://blackfin.uclinux.org/
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/console.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/moduleparam.h>
+#include <linux/types.h>
+
+#include "hvc_console.h"
+
+/* See the Debug/Emulation chapter in the HRM */
+#define EMUDOF   0x00000001	/* EMUDAT_OUT full & valid */
+#define EMUDIF   0x00000002	/* EMUDAT_IN full & valid */
+#define EMUDOOVF 0x00000004	/* EMUDAT_OUT overflow */
+#define EMUDIOVF 0x00000008	/* EMUDAT_IN overflow */
+
+/* Helper functions to glue the register API to simple C operations */
+static inline uint32_t bfin_write_emudat(uint32_t emudat)
+{
+	__asm__ __volatile__("emudat = %0;" : : "d"(emudat));
+	return emudat;
+}
+
+static inline uint32_t bfin_read_emudat(void)
+{
+	uint32_t emudat;
+	__asm__ __volatile__("%0 = emudat;" : "=d"(emudat));
+	return emudat;
+}
+
+/* Send data to the host */
+static int hvc_bfin_put_chars(uint32_t vt, const char *buf, int count)
+{
+	static uint32_t outbound_len;
+	uint32_t emudat;
+	int ret;
+
+	if (bfin_read_DBGSTAT() & EMUDOF)
+		return 0;
+
+	if (!outbound_len) {
+		outbound_len = count;
+		bfin_write_emudat(outbound_len);
+		return 0;
+	}
+
+	ret = min(outbound_len, (uint32_t)4);
+	memcpy(&emudat, buf, ret);
+	bfin_write_emudat(emudat);
+	outbound_len -= ret;
+
+	return ret;
+}
+
+/* Receive data from the host */
+static int hvc_bfin_get_chars(uint32_t vt, char *buf, int count)
+{
+	static uint32_t inbound_len;
+	uint32_t emudat;
+	int ret;
+
+	if (!(bfin_read_DBGSTAT() & EMUDIF))
+		return 0;
+	emudat = bfin_read_emudat();
+
+	if (!inbound_len) {
+		inbound_len = emudat;
+		return 0;
+	}
+
+	ret = min(inbound_len, (uint32_t)4);
+	memcpy(buf, &emudat, ret);
+	inbound_len -= ret;
+
+	return ret;
+}
+
+/* Glue the HVC layers to the Blackfin layers */
+static const struct hv_ops hvc_bfin_get_put_ops = {
+	.get_chars = hvc_bfin_get_chars,
+	.put_chars = hvc_bfin_put_chars,
+};
+
+static int __init hvc_bfin_console_init(void)
+{
+	hvc_instantiate(0, 0, &hvc_bfin_get_put_ops);
+	return 0;
+}
+console_initcall(hvc_bfin_console_init);
+
+static int __init hvc_bfin_init(void)
+{
+	hvc_alloc(0, 0, &hvc_bfin_get_put_ops, 128);
+	return 0;
+}
+device_initcall(hvc_bfin_init);
diff --git a/drivers/tty/hvc/hvc_dcc.c b/drivers/tty/hvc/hvc_dcc.c
index 6470f63deb4b..435f6facbc23 100644
--- a/drivers/tty/hvc/hvc_dcc.c
+++ b/drivers/tty/hvc/hvc_dcc.c
@@ -33,54 +33,29 @@
 static inline u32 __dcc_getstatus(void)
 {
 	u32 __ret;
-
-	asm("mrc p14, 0, %0, c0, c1, 0	@ read comms ctrl reg"
+	asm volatile("mrc p14, 0, %0, c0, c1, 0	@ read comms ctrl reg"
 		: "=r" (__ret) : : "cc");
 
 	return __ret;
 }
 
 
-#if defined(CONFIG_CPU_V7)
 static inline char __dcc_getchar(void)
 {
 	char __c;
 
-	asm("get_wait:	mrc p14, 0, pc, c0, c1, 0                          \n\
-			bne get_wait                                       \n\
-			mrc p14, 0, %0, c0, c5, 0	@ read comms data reg"
-		: "=r" (__c) : : "cc");
-
-	return __c;
-}
-#else
-static inline char __dcc_getchar(void)
-{
-	char __c;
-
-	asm("mrc p14, 0, %0, c0, c5, 0	@ read comms data reg"
+	asm volatile("mrc p14, 0, %0, c0, c5, 0	@ read comms data reg"
 		: "=r" (__c));
 
 	return __c;
 }
-#endif
 
-#if defined(CONFIG_CPU_V7)
-static inline void __dcc_putchar(char c)
-{
-	asm("put_wait:	mrc p14, 0, pc, c0, c1, 0                 \n\
-			bcs put_wait                              \n\
-			mcr p14, 0, %0, c0, c5, 0                   "
-	: : "r" (c) : "cc");
-}
-#else
 static inline void __dcc_putchar(char c)
 {
-	asm("mcr p14, 0, %0, c0, c5, 0	@ write a char"
+	asm volatile("mcr p14, 0, %0, c0, c5, 0	@ write a char"
 		: /* no output register */
 		: "r" (c));
 }
-#endif
 
 static int hvc_dcc_put_chars(uint32_t vt, const char *buf, int count)
 {
@@ -90,7 +65,7 @@ static int hvc_dcc_put_chars(uint32_t vt, const char *buf, int count)
 		while (__dcc_getstatus() & DCC_STATUS_TX)
 			cpu_relax();
 
-		__dcc_putchar((char)(buf[i] & 0xFF));
+		__dcc_putchar(buf[i]);
 	}
 
 	return count;
@@ -100,15 +75,11 @@ static int hvc_dcc_get_chars(uint32_t vt, char *buf, int count)
 {
 	int i;
 
-	for (i = 0; i < count; ++i) {
-		int c = -1;
-
+	for (i = 0; i < count; ++i)
 		if (__dcc_getstatus() & DCC_STATUS_RX)
-			c = __dcc_getchar();
-		if (c < 0)
+			buf[i] = __dcc_getchar();
+		else
 			break;
-		buf[i] = c;
-	}
 
 	return i;
 }
diff --git a/drivers/tty/hvc/hvsi.c b/drivers/tty/hvc/hvsi.c
index 67a75a502c01..8a8d6373f164 100644
--- a/drivers/tty/hvc/hvsi.c
+++ b/drivers/tty/hvc/hvsi.c
@@ -1095,7 +1095,7 @@ static void hvsi_unthrottle(struct tty_struct *tty)
 	h_vio_signal(hp->vtermno, VIO_IRQ_ENABLE);
 }
 
-static int hvsi_tiocmget(struct tty_struct *tty, struct file *file)
+static int hvsi_tiocmget(struct tty_struct *tty)
 {
 	struct hvsi_struct *hp = tty->driver_data;
 
@@ -1103,8 +1103,8 @@ static int hvsi_tiocmget(struct tty_struct *tty, struct file *file)
 	return hp->mctrl;
 }
 
-static int hvsi_tiocmset(struct tty_struct *tty, struct file *file,
-		unsigned int set, unsigned int clear)
+static int hvsi_tiocmset(struct tty_struct *tty,
+				unsigned int set, unsigned int clear)
 {
 	struct hvsi_struct *hp = tty->driver_data;
 	unsigned long flags;
diff --git a/drivers/char/pcmcia/ipwireless/Makefile b/drivers/tty/ipwireless/Makefile
index db80873d7f20..db80873d7f20 100644
--- a/drivers/char/pcmcia/ipwireless/Makefile
+++ b/drivers/tty/ipwireless/Makefile
diff --git a/drivers/char/pcmcia/ipwireless/hardware.c b/drivers/tty/ipwireless/hardware.c
index 0aeb5a38d296..0aeb5a38d296 100644
--- a/drivers/char/pcmcia/ipwireless/hardware.c
+++ b/drivers/tty/ipwireless/hardware.c
diff --git a/drivers/char/pcmcia/ipwireless/hardware.h b/drivers/tty/ipwireless/hardware.h
index 90a8590e43b0..90a8590e43b0 100644
--- a/drivers/char/pcmcia/ipwireless/hardware.h
+++ b/drivers/tty/ipwireless/hardware.h
diff --git a/drivers/char/pcmcia/ipwireless/main.c b/drivers/tty/ipwireless/main.c
index 444155a305ae..444155a305ae 100644
--- a/drivers/char/pcmcia/ipwireless/main.c
+++ b/drivers/tty/ipwireless/main.c
diff --git a/drivers/char/pcmcia/ipwireless/main.h b/drivers/tty/ipwireless/main.h
index f2cbb116bccb..f2cbb116bccb 100644
--- a/drivers/char/pcmcia/ipwireless/main.h
+++ b/drivers/tty/ipwireless/main.h
diff --git a/drivers/char/pcmcia/ipwireless/network.c b/drivers/tty/ipwireless/network.c
index f7daeea598e4..f7daeea598e4 100644
--- a/drivers/char/pcmcia/ipwireless/network.c
+++ b/drivers/tty/ipwireless/network.c
diff --git a/drivers/char/pcmcia/ipwireless/network.h b/drivers/tty/ipwireless/network.h
index 561f765b3334..561f765b3334 100644
--- a/drivers/char/pcmcia/ipwireless/network.h
+++ b/drivers/tty/ipwireless/network.h
diff --git a/drivers/char/pcmcia/ipwireless/setup_protocol.h b/drivers/tty/ipwireless/setup_protocol.h
index 9d6bcc77c73c..9d6bcc77c73c 100644
--- a/drivers/char/pcmcia/ipwireless/setup_protocol.h
+++ b/drivers/tty/ipwireless/setup_protocol.h
diff --git a/drivers/char/pcmcia/ipwireless/tty.c b/drivers/tty/ipwireless/tty.c
index f5eb28b6cb0f..ef92869502a7 100644
--- a/drivers/char/pcmcia/ipwireless/tty.c
+++ b/drivers/tty/ipwireless/tty.c
@@ -395,7 +395,7 @@ static int set_control_lines(struct ipw_tty *tty, unsigned int set,
 	return 0;
 }
 
-static int ipw_tiocmget(struct tty_struct *linux_tty, struct file *file)
+static int ipw_tiocmget(struct tty_struct *linux_tty)
 {
 	struct ipw_tty *tty = linux_tty->driver_data;
 	/* FIXME: Exactly how is the tty object locked here .. */
@@ -410,7 +410,7 @@ static int ipw_tiocmget(struct tty_struct *linux_tty, struct file *file)
 }
 
 static int
-ipw_tiocmset(struct tty_struct *linux_tty, struct file *file,
+ipw_tiocmset(struct tty_struct *linux_tty,
 	     unsigned int set, unsigned int clear)
 {
 	struct ipw_tty *tty = linux_tty->driver_data;
@@ -425,7 +425,7 @@ ipw_tiocmset(struct tty_struct *linux_tty, struct file *file,
 	return set_control_lines(tty, set, clear);
 }
 
-static int ipw_ioctl(struct tty_struct *linux_tty, struct file *file,
+static int ipw_ioctl(struct tty_struct *linux_tty,
 		     unsigned int cmd, unsigned long arg)
 {
 	struct ipw_tty *tty = linux_tty->driver_data;
@@ -484,7 +484,7 @@ static int ipw_ioctl(struct tty_struct *linux_tty, struct file *file,
 			return tty_perform_flush(linux_tty, arg);
 		}
 	}
-	return tty_mode_ioctl(linux_tty, file, cmd , arg);
+	return -ENOIOCTLCMD;
 }
 
 static int add_tty(int j,
diff --git a/drivers/char/pcmcia/ipwireless/tty.h b/drivers/tty/ipwireless/tty.h
index 747b2d637860..747b2d637860 100644
--- a/drivers/char/pcmcia/ipwireless/tty.h
+++ b/drivers/tty/ipwireless/tty.h
diff --git a/drivers/char/isicom.c b/drivers/tty/isicom.c
index c27e9d21fea9..db1cf9c328d8 100644
--- a/drivers/char/isicom.c
+++ b/drivers/tty/isicom.c
@@ -1065,7 +1065,7 @@ static int isicom_send_break(struct tty_struct *tty, int length)
 	return 0;
 }
 
-static int isicom_tiocmget(struct tty_struct *tty, struct file *file)
+static int isicom_tiocmget(struct tty_struct *tty)
 {
 	struct isi_port *port = tty->driver_data;
 	/* just send the port status */
@@ -1082,8 +1082,8 @@ static int isicom_tiocmget(struct tty_struct *tty, struct file *file)
 		((status & ISI_RI ) ? TIOCM_RI  : 0);
 }
 
-static int isicom_tiocmset(struct tty_struct *tty, struct file *file,
-	unsigned int set, unsigned int clear)
+static int isicom_tiocmset(struct tty_struct *tty,
+					unsigned int set, unsigned int clear)
 {
 	struct isi_port *port = tty->driver_data;
 	unsigned long flags;
@@ -1167,7 +1167,7 @@ static int isicom_get_serial_info(struct isi_port *port,
 	return 0;
 }
 
-static int isicom_ioctl(struct tty_struct *tty, struct file *filp,
+static int isicom_ioctl(struct tty_struct *tty,
 	unsigned int cmd, unsigned long arg)
 {
 	struct isi_port *port = tty->driver_data;
diff --git a/drivers/char/moxa.c b/drivers/tty/moxa.c
index 107b0bd58d19..35b0c38590e6 100644
--- a/drivers/char/moxa.c
+++ b/drivers/tty/moxa.c
@@ -199,8 +199,8 @@ static void moxa_set_termios(struct tty_struct *, struct ktermios *);
 static void moxa_stop(struct tty_struct *);
 static void moxa_start(struct tty_struct *);
 static void moxa_hangup(struct tty_struct *);
-static int moxa_tiocmget(struct tty_struct *tty, struct file *file);
-static int moxa_tiocmset(struct tty_struct *tty, struct file *file,
+static int moxa_tiocmget(struct tty_struct *tty);
+static int moxa_tiocmset(struct tty_struct *tty,
 			 unsigned int set, unsigned int clear);
 static void moxa_poll(unsigned long);
 static void moxa_set_tty_param(struct tty_struct *, struct ktermios *);
@@ -287,7 +287,7 @@ static void moxa_low_water_check(void __iomem *ofsAddr)
  * TTY operations
  */
 
-static int moxa_ioctl(struct tty_struct *tty, struct file *file,
+static int moxa_ioctl(struct tty_struct *tty,
 		      unsigned int cmd, unsigned long arg)
 {
 	struct moxa_port *ch = tty->driver_data;
@@ -1257,7 +1257,7 @@ static int moxa_chars_in_buffer(struct tty_struct *tty)
 	return chars;
 }
 
-static int moxa_tiocmget(struct tty_struct *tty, struct file *file)
+static int moxa_tiocmget(struct tty_struct *tty)
 {
 	struct moxa_port *ch = tty->driver_data;
 	int flag = 0, dtr, rts;
@@ -1277,7 +1277,7 @@ static int moxa_tiocmget(struct tty_struct *tty, struct file *file)
 	return flag;
 }
 
-static int moxa_tiocmset(struct tty_struct *tty, struct file *file,
+static int moxa_tiocmset(struct tty_struct *tty,
 			 unsigned int set, unsigned int clear)
 {
 	struct moxa_port *ch;
diff --git a/drivers/char/moxa.h b/drivers/tty/moxa.h
index 87d16ce57be7..87d16ce57be7 100644
--- a/drivers/char/moxa.h
+++ b/drivers/tty/moxa.h
diff --git a/drivers/char/mxser.c b/drivers/tty/mxser.c
index dd9d75351cd6..d188f378684d 100644
--- a/drivers/char/mxser.c
+++ b/drivers/tty/mxser.c
@@ -1320,7 +1320,7 @@ static int mxser_get_lsr_info(struct mxser_port *info,
 	return put_user(result, value);
 }
 
-static int mxser_tiocmget(struct tty_struct *tty, struct file *file)
+static int mxser_tiocmget(struct tty_struct *tty)
 {
 	struct mxser_port *info = tty->driver_data;
 	unsigned char control, status;
@@ -1347,7 +1347,7 @@ static int mxser_tiocmget(struct tty_struct *tty, struct file *file)
 		    ((status & UART_MSR_CTS) ? TIOCM_CTS : 0);
 }
 
-static int mxser_tiocmset(struct tty_struct *tty, struct file *file,
+static int mxser_tiocmset(struct tty_struct *tty,
 		unsigned int set, unsigned int clear)
 {
 	struct mxser_port *info = tty->driver_data;
@@ -1655,7 +1655,7 @@ static int mxser_cflags_changed(struct mxser_port *info, unsigned long arg,
 	return ret;
 }
 
-static int mxser_ioctl(struct tty_struct *tty, struct file *file,
+static int mxser_ioctl(struct tty_struct *tty,
 		unsigned int cmd, unsigned long arg)
 {
 	struct mxser_port *info = tty->driver_data;
diff --git a/drivers/char/mxser.h b/drivers/tty/mxser.h
index 41878a69203d..41878a69203d 100644
--- a/drivers/char/mxser.h
+++ b/drivers/tty/mxser.h
diff --git a/drivers/tty/n_gsm.c b/drivers/tty/n_gsm.c
index aa2e5d3eb01a..176f63256b37 100644
--- a/drivers/tty/n_gsm.c
+++ b/drivers/tty/n_gsm.c
@@ -1250,8 +1250,7 @@ static void gsm_control_response(struct gsm_mux *gsm, unsigned int command,
 
 static void gsm_control_transmit(struct gsm_mux *gsm, struct gsm_control *ctrl)
 {
-	struct gsm_msg *msg = gsm_data_alloc(gsm, 0, ctrl->len + 1,
-							gsm->ftype|PF);
+	struct gsm_msg *msg = gsm_data_alloc(gsm, 0, ctrl->len + 1, gsm->ftype);
 	if (msg == NULL)
 		return;
 	msg->data[0] = (ctrl->cmd << 1) | 2 | EA;	/* command */
@@ -2649,13 +2648,13 @@ static void gsmtty_wait_until_sent(struct tty_struct *tty, int timeout)
 	   to do here */
 }
 
-static int gsmtty_tiocmget(struct tty_struct *tty, struct file *filp)
+static int gsmtty_tiocmget(struct tty_struct *tty)
 {
 	struct gsm_dlci *dlci = tty->driver_data;
 	return dlci->modem_rx;
 }
 
-static int gsmtty_tiocmset(struct tty_struct *tty, struct file *filp,
+static int gsmtty_tiocmset(struct tty_struct *tty,
 	unsigned int set, unsigned int clear)
 {
 	struct gsm_dlci *dlci = tty->driver_data;
@@ -2672,7 +2671,7 @@ static int gsmtty_tiocmset(struct tty_struct *tty, struct file *filp,
 }
 
 
-static int gsmtty_ioctl(struct tty_struct *tty, struct file *filp,
+static int gsmtty_ioctl(struct tty_struct *tty,
 			unsigned int cmd, unsigned long arg)
 {
 	return -ENOIOCTLCMD;
diff --git a/drivers/char/nozomi.c b/drivers/tty/nozomi.c
index 294d03e8c61a..f4f11164efe5 100644
--- a/drivers/char/nozomi.c
+++ b/drivers/tty/nozomi.c
@@ -1514,8 +1514,6 @@ static void __devexit tty_exit(struct nozomi *dc)
 
 	DBG1(" ");
 
-	flush_scheduled_work();
-
 	for (i = 0; i < MAX_PORT; ++i) {
 		struct tty_struct *tty = tty_port_tty_get(&dc->port[i].port);
 		if (tty && list_empty(&tty->hangup_work.entry))
@@ -1750,7 +1748,7 @@ static int ntty_write_room(struct tty_struct *tty)
 }
 
 /* Gets io control parameters */
-static int ntty_tiocmget(struct tty_struct *tty, struct file *file)
+static int ntty_tiocmget(struct tty_struct *tty)
 {
 	const struct port *port = tty->driver_data;
 	const struct ctrl_dl *ctrl_dl = &port->ctrl_dl;
@@ -1767,8 +1765,8 @@ static int ntty_tiocmget(struct tty_struct *tty, struct file *file)
 }
 
 /* Sets io controls parameters */
-static int ntty_tiocmset(struct tty_struct *tty, struct file *file,
-	unsigned int set, unsigned int clear)
+static int ntty_tiocmset(struct tty_struct *tty,
+					unsigned int set, unsigned int clear)
 {
 	struct nozomi *dc = get_dc_by_tty(tty);
 	unsigned long flags;
@@ -1824,7 +1822,7 @@ static int ntty_tiocgicount(struct tty_struct *tty,
 	return 0;
 }
 
-static int ntty_ioctl(struct tty_struct *tty, struct file *file,
+static int ntty_ioctl(struct tty_struct *tty,
 		      unsigned int cmd, unsigned long arg)
 {
 	struct port *port = tty->driver_data;
diff --git a/drivers/tty/pty.c b/drivers/tty/pty.c
index 923a48585501..c88029af84dd 100644
--- a/drivers/tty/pty.c
+++ b/drivers/tty/pty.c
@@ -334,7 +334,7 @@ free_mem_out:
 	return -ENOMEM;
 }
 
-static int pty_bsd_ioctl(struct tty_struct *tty, struct file *file,
+static int pty_bsd_ioctl(struct tty_struct *tty,
 			 unsigned int cmd, unsigned long arg)
 {
 	switch (cmd) {
@@ -489,7 +489,7 @@ static struct ctl_table pty_root_table[] = {
 };
 
 
-static int pty_unix98_ioctl(struct tty_struct *tty, struct file *file,
+static int pty_unix98_ioctl(struct tty_struct *tty,
 			    unsigned int cmd, unsigned long arg)
 {
 	switch (cmd) {
diff --git a/drivers/char/rocket.c b/drivers/tty/rocket.c
index 3e4e73a0d7c1..3780da8ad12d 100644
--- a/drivers/char/rocket.c
+++ b/drivers/tty/rocket.c
@@ -1169,7 +1169,7 @@ static int sGetChanRI(CHANNEL_T * ChP)
  *  Returns the state of the serial modem control lines.  These next 2 functions 
  *  are the way kernel versions > 2.5 handle modem control lines rather than IOCTLs.
  */
-static int rp_tiocmget(struct tty_struct *tty, struct file *file)
+static int rp_tiocmget(struct tty_struct *tty)
 {
 	struct r_port *info = tty->driver_data;
 	unsigned int control, result, ChanStatus;
@@ -1189,8 +1189,8 @@ static int rp_tiocmget(struct tty_struct *tty, struct file *file)
 /* 
  *  Sets the modem control lines
  */
-static int rp_tiocmset(struct tty_struct *tty, struct file *file,
-		    unsigned int set, unsigned int clear)
+static int rp_tiocmset(struct tty_struct *tty,
+				unsigned int set, unsigned int clear)
 {
 	struct r_port *info = tty->driver_data;
 
@@ -1326,7 +1326,7 @@ static int get_version(struct r_port *info, struct rocket_version __user *retver
 }
 
 /*  IOCTL call handler into the driver */
-static int rp_ioctl(struct tty_struct *tty, struct file *file,
+static int rp_ioctl(struct tty_struct *tty,
 		    unsigned int cmd, unsigned long arg)
 {
 	struct r_port *info = tty->driver_data;
diff --git a/drivers/char/rocket.h b/drivers/tty/rocket.h
index ec863f35f1a9..ec863f35f1a9 100644
--- a/drivers/char/rocket.h
+++ b/drivers/tty/rocket.h
diff --git a/drivers/char/rocket_int.h b/drivers/tty/rocket_int.h
index 67e0f1e778a2..67e0f1e778a2 100644
--- a/drivers/char/rocket_int.h
+++ b/drivers/tty/rocket_int.h
diff --git a/drivers/tty/serial/68328serial.c b/drivers/tty/serial/68328serial.c
index de0160e3f8c4..d5bfd41707e7 100644
--- a/drivers/tty/serial/68328serial.c
+++ b/drivers/tty/serial/68328serial.c
@@ -393,28 +393,6 @@ static void do_softint(struct work_struct *work)
 #endif   
 }
 
-/*
- * This routine is called from the scheduler tqueue when the interrupt
- * routine has signalled that a hangup has occurred.  The path of
- * hangup processing is:
- *
- * 	serial interrupt routine -> (scheduler tqueue) ->
- * 	do_serial_hangup() -> tty->hangup() -> rs_hangup()
- * 
- */
-static void do_serial_hangup(struct work_struct *work)
-{
-	struct m68k_serial	*info = container_of(work, struct m68k_serial, tqueue_hangup);
-	struct tty_struct	*tty;
-	
-	tty = info->tty;
-	if (!tty)
-		return;
-
-	tty_hangup(tty);
-}
-
-
 static int startup(struct m68k_serial * info)
 {
 	m68328_uart *uart = &uart_addr[info->line];
@@ -967,7 +945,7 @@ static void send_break(struct m68k_serial * info, unsigned int duration)
         local_irq_restore(flags);
 }
 
-static int rs_ioctl(struct tty_struct *tty, struct file * file,
+static int rs_ioctl(struct tty_struct *tty,
 		    unsigned int cmd, unsigned long arg)
 {
 	struct m68k_serial * info = (struct m68k_serial *)tty->driver_data;
@@ -1347,7 +1325,6 @@ rs68328_init(void)
 	    info->count = 0;
 	    info->blocked_open = 0;
 	    INIT_WORK(&info->tqueue, do_softint);
-	    INIT_WORK(&info->tqueue_hangup, do_serial_hangup);
 	    init_waitqueue_head(&info->open_wait);
 	    init_waitqueue_head(&info->close_wait);
 	    info->line = i;
diff --git a/drivers/tty/serial/68328serial.h b/drivers/tty/serial/68328serial.h
index 664ceb0a158c..8c9c3c0745db 100644
--- a/drivers/tty/serial/68328serial.h
+++ b/drivers/tty/serial/68328serial.h
@@ -159,7 +159,6 @@ struct m68k_serial {
 	int			xmit_tail;
 	int			xmit_cnt;
 	struct work_struct	tqueue;
-	struct work_struct	tqueue_hangup;
 	wait_queue_head_t	open_wait;
 	wait_queue_head_t	close_wait;
 };
diff --git a/drivers/tty/serial/68360serial.c b/drivers/tty/serial/68360serial.c
index bc21eeae8fde..0a3e8787ed50 100644
--- a/drivers/tty/serial/68360serial.c
+++ b/drivers/tty/serial/68360serial.c
@@ -1240,7 +1240,7 @@ static int get_lsr_info(struct async_struct * info, unsigned int *value)
 }
 #endif
 
-static int rs_360_tiocmget(struct tty_struct *tty, struct file *file)
+static int rs_360_tiocmget(struct tty_struct *tty)
 {
 	ser_info_t *info = (ser_info_t *)tty->driver_data;
 	unsigned int result = 0;
@@ -1271,7 +1271,7 @@ static int rs_360_tiocmget(struct tty_struct *tty, struct file *file)
 	return result;
 }
 
-static int rs_360_tiocmset(struct tty_struct *tty, struct file *file,
+static int rs_360_tiocmset(struct tty_struct *tty,
 			   unsigned int set, unsigned int clear)
 {
 #ifdef modem_control
@@ -1405,7 +1405,7 @@ static int rs_360_get_icount(struct tty_struct *tty,
 	return 0;
 }
 
-static int rs_360_ioctl(struct tty_struct *tty, struct file * file,
+static int rs_360_ioctl(struct tty_struct *tty,
 		    unsigned int cmd, unsigned long arg)
 {
 	int error;
diff --git a/drivers/tty/serial/8250.c b/drivers/tty/serial/8250.c
index 3975df6f7fdb..b3b881bc4712 100644
--- a/drivers/tty/serial/8250.c
+++ b/drivers/tty/serial/8250.c
@@ -954,6 +954,23 @@ static int broken_efr(struct uart_8250_port *up)
 	return 0;
 }
 
+static inline int ns16550a_goto_highspeed(struct uart_8250_port *up)
+{
+	unsigned char status;
+
+	status = serial_in(up, 0x04); /* EXCR2 */
+#define PRESL(x) ((x) & 0x30)
+	if (PRESL(status) == 0x10) {
+		/* already in high speed mode */
+		return 0;
+	} else {
+		status &= ~0xB0; /* Disable LOCK, mask out PRESL[01] */
+		status |= 0x10;  /* 1.625 divisor for baud_base --> 921600 */
+		serial_outp(up, 0x04, status);
+	}
+	return 1;
+}
+
 /*
  * We know that the chip has FIFOs.  Does it have an EFR?  The
  * EFR is located in the same register position as the IIR and
@@ -1025,12 +1042,8 @@ static void autoconfig_16550a(struct uart_8250_port *up)
 			quot = serial_dl_read(up);
 			quot <<= 3;
 
-			status1 = serial_in(up, 0x04); /* EXCR2 */
-			status1 &= ~0xB0; /* Disable LOCK, mask out PRESL[01] */
-			status1 |= 0x10;  /* 1.625 divisor for baud_base --> 921600 */
-			serial_outp(up, 0x04, status1);
-
-			serial_dl_write(up, quot);
+			if (ns16550a_goto_highspeed(up))
+				serial_dl_write(up, quot);
 
 			serial_outp(up, UART_LCR, 0);
 
@@ -3025,17 +3038,13 @@ void serial8250_resume_port(int line)
 	struct uart_8250_port *up = &serial8250_ports[line];
 
 	if (up->capabilities & UART_NATSEMI) {
-		unsigned char tmp;
-
 		/* Ensure it's still in high speed mode */
 		serial_outp(up, UART_LCR, 0xE0);
 
-		tmp = serial_in(up, 0x04); /* EXCR2 */
-		tmp &= ~0xB0; /* Disable LOCK, mask out PRESL[01] */
-		tmp |= 0x10;  /* 1.625 divisor for baud_base --> 921600 */
-		serial_outp(up, 0x04, tmp);
+		ns16550a_goto_highspeed(up);
 
 		serial_outp(up, UART_LCR, 0);
+		up->port.uartclk = 921600*16;
 	}
 	uart_resume_port(&serial8250_reg, &up->port);
 }
diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index 2b8334601c8b..d9ccbf825095 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -1319,6 +1319,18 @@ config SERIAL_MSM_CONSOLE
 	depends on SERIAL_MSM=y
 	select SERIAL_CORE_CONSOLE
 
+config SERIAL_MSM_HS
+	tristate "MSM UART High Speed: Serial Driver"
+	depends on ARCH_MSM
+	select SERIAL_CORE
+	help
+	  If you have a machine based on MSM family of SoCs, you
+	  can enable its onboard high speed serial port by enabling
+	  this option.
+
+	  Choose M here to compile it as a module. The module will be
+	  called msm_serial_hs.
+
 config SERIAL_VT8500
 	bool "VIA VT8500 on-chip serial port support"
 	depends on ARM && ARCH_VT8500
@@ -1588,12 +1600,25 @@ config SERIAL_IFX6X60
 	  Support for the IFX6x60 modem devices on Intel MID platforms.
 
 config SERIAL_PCH_UART
-	tristate "Intel EG20T PCH UART"
-	depends on PCI && DMADEVICES
+	tristate "Intel EG20T PCH UART/OKI SEMICONDUCTOR ML7213 IOH"
+	depends on PCI
 	select SERIAL_CORE
-	select PCH_DMA
 	help
 	  This driver is for PCH(Platform controller Hub) UART of Intel EG20T
 	  which is an IOH(Input/Output Hub) for x86 embedded processor.
 	  Enabling PCH_DMA, this PCH UART works as DMA mode.
+
+	  This driver also can be used for OKI SEMICONDUCTOR ML7213 IOH(Input/
+	  Output Hub) which is for IVI(In-Vehicle Infotainment) use.
+	  ML7213 is companion chip for Intel Atom E6xx series.
+	  ML7213 is completely compatible for Intel EG20T PCH.
+
+config SERIAL_MSM_SMD
+	bool "Enable tty device interface for some SMD ports"
+	default n
+	depends on MSM_SMD
+	help
+	  Enables userspace clients to read and write to some streaming SMD
+	  ports via tty device interface for MSM chipset.
+
 endmenu
diff --git a/drivers/tty/serial/Makefile b/drivers/tty/serial/Makefile
index 8ea92e9c73b0..d94dc005c8a6 100644
--- a/drivers/tty/serial/Makefile
+++ b/drivers/tty/serial/Makefile
@@ -76,6 +76,7 @@ obj-$(CONFIG_SERIAL_SGI_IOC3) += ioc3_serial.o
 obj-$(CONFIG_SERIAL_ATMEL) += atmel_serial.o
 obj-$(CONFIG_SERIAL_UARTLITE) += uartlite.o
 obj-$(CONFIG_SERIAL_MSM) += msm_serial.o
+obj-$(CONFIG_SERIAL_MSM_HS) += msm_serial_hs.o
 obj-$(CONFIG_SERIAL_NETX) += netx-serial.o
 obj-$(CONFIG_SERIAL_OF_PLATFORM) += of_serial.o
 obj-$(CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL) += nwpserial.o
@@ -92,3 +93,4 @@ obj-$(CONFIG_SERIAL_MRST_MAX3110)	+= mrst_max3110.o
 obj-$(CONFIG_SERIAL_MFD_HSU)	+= mfd.o
 obj-$(CONFIG_SERIAL_IFX6X60)  	+= ifx6x60.o
 obj-$(CONFIG_SERIAL_PCH_UART)	+= pch_uart.o
+obj-$(CONFIG_SERIAL_MSM_SMD)	+= msm_smd_tty.o
diff --git a/drivers/tty/serial/altera_jtaguart.c b/drivers/tty/serial/altera_jtaguart.c
index f9b49b5ff5e1..8f014bb916b7 100644
--- a/drivers/tty/serial/altera_jtaguart.c
+++ b/drivers/tty/serial/altera_jtaguart.c
@@ -305,28 +305,6 @@ static struct altera_jtaguart altera_jtaguart_ports[ALTERA_JTAGUART_MAXPORTS];
 
 #if defined(CONFIG_SERIAL_ALTERA_JTAGUART_CONSOLE)
 
-int __init early_altera_jtaguart_setup(struct altera_jtaguart_platform_uart
-				       *platp)
-{
-	struct uart_port *port;
-	int i;
-
-	for (i = 0; i < ALTERA_JTAGUART_MAXPORTS && platp[i].mapbase; i++) {
-		port = &altera_jtaguart_ports[i].port;
-
-		port->line = i;
-		port->type = PORT_ALTERA_JTAGUART;
-		port->mapbase = platp[i].mapbase;
-		port->membase = ioremap(port->mapbase, ALTERA_JTAGUART_SIZE);
-		port->iotype = SERIAL_IO_MEM;
-		port->irq = platp[i].irq;
-		port->flags = ASYNC_BOOT_AUTOCONF;
-		port->ops = &altera_jtaguart_ops;
-	}
-
-	return 0;
-}
-
 #if defined(CONFIG_SERIAL_ALTERA_JTAGUART_CONSOLE_BYPASS)
 static void altera_jtaguart_console_putc(struct console *co, const char c)
 {
@@ -384,7 +362,7 @@ static int __init altera_jtaguart_console_setup(struct console *co,
 	if (co->index < 0 || co->index >= ALTERA_JTAGUART_MAXPORTS)
 		return -EINVAL;
 	port = &altera_jtaguart_ports[co->index].port;
-	if (port->membase == 0)
+	if (port->membase == NULL)
 		return -ENODEV;
 	return 0;
 }
@@ -431,22 +409,45 @@ static int __devinit altera_jtaguart_probe(struct platform_device *pdev)
 {
 	struct altera_jtaguart_platform_uart *platp = pdev->dev.platform_data;
 	struct uart_port *port;
-	int i;
+	struct resource *res_irq, *res_mem;
+	int i = pdev->id;
 
-	for (i = 0; i < ALTERA_JTAGUART_MAXPORTS && platp[i].mapbase; i++) {
-		port = &altera_jtaguart_ports[i].port;
+	/* -1 emphasizes that the platform must have one port, no .N suffix */
+	if (i == -1)
+		i = 0;
 
-		port->line = i;
-		port->type = PORT_ALTERA_JTAGUART;
-		port->mapbase = platp[i].mapbase;
-		port->membase = ioremap(port->mapbase, ALTERA_JTAGUART_SIZE);
-		port->iotype = SERIAL_IO_MEM;
-		port->irq = platp[i].irq;
-		port->ops = &altera_jtaguart_ops;
-		port->flags = ASYNC_BOOT_AUTOCONF;
+	if (i >= ALTERA_JTAGUART_MAXPORTS)
+		return -EINVAL;
 
-		uart_add_one_port(&altera_jtaguart_driver, port);
-	}
+	port = &altera_jtaguart_ports[i].port;
+
+	res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (res_mem)
+		port->mapbase = res_mem->start;
+	else if (platp)
+		port->mapbase = platp->mapbase;
+	else
+		return -ENODEV;
+
+	res_irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+	if (res_irq)
+		port->irq = res_irq->start;
+	else if (platp)
+		port->irq = platp->irq;
+	else
+		return -ENODEV;
+
+	port->membase = ioremap(port->mapbase, ALTERA_JTAGUART_SIZE);
+	if (!port->membase)
+		return -ENOMEM;
+
+	port->line = i;
+	port->type = PORT_ALTERA_JTAGUART;
+	port->iotype = SERIAL_IO_MEM;
+	port->ops = &altera_jtaguart_ops;
+	port->flags = UPF_BOOT_AUTOCONF;
+
+	uart_add_one_port(&altera_jtaguart_driver, port);
 
 	return 0;
 }
@@ -454,13 +455,13 @@ static int __devinit altera_jtaguart_probe(struct platform_device *pdev)
 static int __devexit altera_jtaguart_remove(struct platform_device *pdev)
 {
 	struct uart_port *port;
-	int i;
+	int i = pdev->id;
 
-	for (i = 0; i < ALTERA_JTAGUART_MAXPORTS; i++) {
-		port = &altera_jtaguart_ports[i].port;
-		if (port)
-			uart_remove_one_port(&altera_jtaguart_driver, port);
-	}
+	if (i == -1)
+		i = 0;
+
+	port = &altera_jtaguart_ports[i].port;
+	uart_remove_one_port(&altera_jtaguart_driver, port);
 
 	return 0;
 }
diff --git a/drivers/tty/serial/altera_uart.c b/drivers/tty/serial/altera_uart.c
index 721216292a50..3a573528555e 100644
--- a/drivers/tty/serial/altera_uart.c
+++ b/drivers/tty/serial/altera_uart.c
@@ -86,16 +86,12 @@ struct altera_uart {
 
 static u32 altera_uart_readl(struct uart_port *port, int reg)
 {
-	struct altera_uart_platform_uart *platp = port->private_data;
-
-	return readl(port->membase + (reg << platp->bus_shift));
+	return readl(port->membase + (reg << port->regshift));
 }
 
 static void altera_uart_writel(struct uart_port *port, u32 dat, int reg)
 {
-	struct altera_uart_platform_uart *platp = port->private_data;
-
-	writel(dat, port->membase + (reg << platp->bus_shift));
+	writel(dat, port->membase + (reg << port->regshift));
 }
 
 static unsigned int altera_uart_tx_empty(struct uart_port *port)
@@ -546,13 +542,17 @@ static int __devinit altera_uart_probe(struct platform_device *pdev)
 	if (!port->membase)
 		return -ENOMEM;
 
+	if (platp)
+		port->regshift = platp->bus_shift;
+	else
+		port->regshift = 0;
+
 	port->line = i;
 	port->type = PORT_ALTERA_UART;
 	port->iotype = SERIAL_IO_MEM;
 	port->uartclk = platp->uartclk;
 	port->ops = &altera_uart_ops;
 	port->flags = UPF_BOOT_AUTOCONF;
-	port->private_data = platp;
 
 	uart_add_one_port(&altera_uart_driver, port);
 
@@ -561,9 +561,15 @@ static int __devinit altera_uart_probe(struct platform_device *pdev)
 
 static int __devexit altera_uart_remove(struct platform_device *pdev)
 {
-	struct uart_port *port = &altera_uart_ports[pdev->id].port;
+	struct uart_port *port;
+	int i = pdev->id;
 
+	if (i == -1)
+		i = 0;
+
+	port = &altera_uart_ports[i].port;
 	uart_remove_one_port(&altera_uart_driver, port);
+
 	return 0;
 }
 
diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c
index 2a1d52fb4936..f119d1761106 100644
--- a/drivers/tty/serial/atmel_serial.c
+++ b/drivers/tty/serial/atmel_serial.c
@@ -1240,6 +1240,21 @@ static void atmel_set_termios(struct uart_port *port, struct ktermios *termios,
 	spin_unlock_irqrestore(&port->lock, flags);
 }
 
+static void atmel_set_ldisc(struct uart_port *port, int new)
+{
+	int line = port->line;
+
+	if (line >= port->state->port.tty->driver->num)
+		return;
+
+	if (port->state->port.tty->ldisc->ops->num == N_PPS) {
+		port->flags |= UPF_HARDPPS_CD;
+		atmel_enable_ms(port);
+	} else {
+		port->flags &= ~UPF_HARDPPS_CD;
+	}
+}
+
 /*
  * Return string describing the specified port
  */
@@ -1380,6 +1395,7 @@ static struct uart_ops atmel_pops = {
 	.shutdown	= atmel_shutdown,
 	.flush_buffer	= atmel_flush_buffer,
 	.set_termios	= atmel_set_termios,
+	.set_ldisc	= atmel_set_ldisc,
 	.type		= atmel_type,
 	.release_port	= atmel_release_port,
 	.request_port	= atmel_request_port,
diff --git a/drivers/tty/serial/bfin_sport_uart.c b/drivers/tty/serial/bfin_sport_uart.c
index e95c524d9d18..c3ec0a61d859 100644
--- a/drivers/tty/serial/bfin_sport_uart.c
+++ b/drivers/tty/serial/bfin_sport_uart.c
@@ -788,7 +788,7 @@ static int __devinit sport_uart_probe(struct platform_device *pdev)
 		sport->port.mapbase = res->start;
 
 		sport->port.irq = platform_get_irq(pdev, 0);
-		if (sport->port.irq < 0) {
+		if ((int)sport->port.irq < 0) {
 			dev_err(&pdev->dev, "No sport RX/TX IRQ specified\n");
 			ret = -ENOENT;
 			goto out_error_unmap;
diff --git a/drivers/tty/serial/crisv10.c b/drivers/tty/serial/crisv10.c
index bcc31f2140ac..225123b37f19 100644
--- a/drivers/tty/serial/crisv10.c
+++ b/drivers/tty/serial/crisv10.c
@@ -3581,8 +3581,7 @@ rs_break(struct tty_struct *tty, int break_state)
 }
 
 static int
-rs_tiocmset(struct tty_struct *tty, struct file *file,
-		unsigned int set, unsigned int clear)
+rs_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear)
 {
 	struct e100_serial *info = (struct e100_serial *)tty->driver_data;
 	unsigned long flags;
@@ -3614,7 +3613,7 @@ rs_tiocmset(struct tty_struct *tty, struct file *file,
 }
 
 static int
-rs_tiocmget(struct tty_struct *tty, struct file *file)
+rs_tiocmget(struct tty_struct *tty)
 {
 	struct e100_serial *info = (struct e100_serial *)tty->driver_data;
 	unsigned int result;
@@ -3648,7 +3647,7 @@ rs_tiocmget(struct tty_struct *tty, struct file *file)
 
 
 static int
-rs_ioctl(struct tty_struct *tty, struct file * file,
+rs_ioctl(struct tty_struct *tty,
 	 unsigned int cmd, unsigned long arg)
 {
 	struct e100_serial * info = (struct e100_serial *)tty->driver_data;
diff --git a/drivers/tty/serial/ifx6x60.c b/drivers/tty/serial/ifx6x60.c
index ab93763862d5..8ee5a41d340d 100644
--- a/drivers/tty/serial/ifx6x60.c
+++ b/drivers/tty/serial/ifx6x60.c
@@ -8,7 +8,7 @@
  *		      Jan Dumon <j.dumon@option.com>
  *
  * Copyright (C) 2009, 2010 Intel Corp
- * Russ Gorby <richardx.r.gorby@intel.com>
+ * Russ Gorby <russ.gorby@intel.com>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -67,6 +67,7 @@
 #define IFX_SPI_MORE_MASK		0x10
 #define IFX_SPI_MORE_BIT		12	/* bit position in u16 */
 #define IFX_SPI_CTS_BIT			13	/* bit position in u16 */
+#define IFX_SPI_MODE			SPI_MODE_1
 #define IFX_SPI_TTY_ID			0
 #define IFX_SPI_TIMEOUT_SEC		2
 #define IFX_SPI_HEADER_0		(-1)
@@ -76,7 +77,7 @@
 static void ifx_spi_handle_srdy(struct ifx_spi_device *ifx_dev);
 
 /* local variables */
-static int spi_b16 = 1;			/* 8 or 16 bit word length */
+static int spi_bpw = 16;		/* 8, 16 or 32 bit word length */
 static struct tty_driver *tty_drv;
 static struct ifx_spi_device *saved_ifx_dev;
 static struct lock_class_key ifx_spi_key;
@@ -244,7 +245,7 @@ static void ifx_spi_timeout(unsigned long arg)
  *	Map the signal state into Linux modem flags and report the value
  *	in Linux terms
  */
-static int ifx_spi_tiocmget(struct tty_struct *tty, struct file *filp)
+static int ifx_spi_tiocmget(struct tty_struct *tty)
 {
 	unsigned int value;
 	struct ifx_spi_device *ifx_dev = tty->driver_data;
@@ -262,7 +263,6 @@ static int ifx_spi_tiocmget(struct tty_struct *tty, struct file *filp)
 /**
  *	ifx_spi_tiocmset	-	set modem bits
  *	@tty: the tty structure
- *	@filp: file handle issuing the request
  *	@set: bits to set
  *	@clear: bits to clear
  *
@@ -271,7 +271,7 @@ static int ifx_spi_tiocmget(struct tty_struct *tty, struct file *filp)
  *
  *	FIXME: do we need to kick the tranfers when we do this ?
  */
-static int ifx_spi_tiocmset(struct tty_struct *tty, struct file *filp,
+static int ifx_spi_tiocmset(struct tty_struct *tty,
 			    unsigned int set, unsigned int clear)
 {
 	struct ifx_spi_device *ifx_dev = tty->driver_data;
@@ -722,9 +722,9 @@ static void ifx_spi_io(unsigned long data)
 		/* note len is BYTES, not transfers */
 		ifx_dev->spi_xfer.len = IFX_SPI_TRANSFER_SIZE;
 		ifx_dev->spi_xfer.cs_change = 0;
-		ifx_dev->spi_xfer.speed_hz = 12500000;
+		ifx_dev->spi_xfer.speed_hz = ifx_dev->spi_dev->max_speed_hz;
 		/* ifx_dev->spi_xfer.speed_hz = 390625; */
-		ifx_dev->spi_xfer.bits_per_word = spi_b16 ? 16 : 8;
+		ifx_dev->spi_xfer.bits_per_word = spi_bpw;
 
 		ifx_dev->spi_xfer.tx_buf = ifx_dev->tx_buffer;
 		ifx_dev->spi_xfer.rx_buf = ifx_dev->rx_buffer;
@@ -732,7 +732,7 @@ static void ifx_spi_io(unsigned long data)
 		/*
 		 * setup dma pointers
 		 */
-		if (ifx_dev->is_6160) {
+		if (ifx_dev->use_dma) {
 			ifx_dev->spi_msg.is_dma_mapped = 1;
 			ifx_dev->tx_dma = ifx_dev->tx_bus;
 			ifx_dev->rx_dma = ifx_dev->rx_bus;
@@ -798,8 +798,8 @@ static int ifx_spi_create_port(struct ifx_spi_device *ifx_dev)
 		goto error_ret;
 	}
 
-	pport->ops = &ifx_tty_port_ops;
 	tty_port_init(pport);
+	pport->ops = &ifx_tty_port_ops;
 	ifx_dev->minor = IFX_SPI_TTY_ID;
 	ifx_dev->tty_dev = tty_register_device(tty_drv, ifx_dev->minor,
 					       &ifx_dev->spi_dev->dev);
@@ -960,7 +960,7 @@ static int ifx_spi_spi_probe(struct spi_device *spi)
 {
 	int ret;
 	int srdy;
-	struct ifx_modem_platform_data *pl_data = NULL;
+	struct ifx_modem_platform_data *pl_data;
 	struct ifx_spi_device *ifx_dev;
 
 	if (saved_ifx_dev) {
@@ -968,6 +968,12 @@ static int ifx_spi_spi_probe(struct spi_device *spi)
 		return -ENODEV;
 	}
 
+	pl_data = (struct ifx_modem_platform_data *)spi->dev.platform_data;
+	if (!pl_data) {
+		dev_err(&spi->dev, "missing platform data!");
+		return -ENODEV;
+	}
+
 	/* initialize structure to hold our device variables */
 	ifx_dev = kzalloc(sizeof(struct ifx_spi_device), GFP_KERNEL);
 	if (!ifx_dev) {
@@ -983,14 +989,25 @@ static int ifx_spi_spi_probe(struct spi_device *spi)
 	init_timer(&ifx_dev->spi_timer);
 	ifx_dev->spi_timer.function = ifx_spi_timeout;
 	ifx_dev->spi_timer.data = (unsigned long)ifx_dev;
-	ifx_dev->is_6160 = pl_data->is_6160;
+	ifx_dev->modem = pl_data->modem_type;
+	ifx_dev->use_dma = pl_data->use_dma;
+	ifx_dev->max_hz = pl_data->max_hz;
+	/* initialize spi mode, etc */
+	spi->max_speed_hz = ifx_dev->max_hz;
+	spi->mode = IFX_SPI_MODE | (SPI_LOOP & spi->mode);
+	spi->bits_per_word = spi_bpw;
+	ret = spi_setup(spi);
+	if (ret) {
+		dev_err(&spi->dev, "SPI setup wasn't successful %d", ret);
+		return -ENODEV;
+	}
 
 	/* ensure SPI protocol flags are initialized to enable transfer */
 	ifx_dev->spi_more = 0;
 	ifx_dev->spi_slave_cts = 0;
 
 	/*initialize transfer and dma buffers */
-	ifx_dev->tx_buffer = dma_alloc_coherent(&ifx_dev->spi_dev->dev,
+	ifx_dev->tx_buffer = dma_alloc_coherent(ifx_dev->spi_dev->dev.parent,
 				IFX_SPI_TRANSFER_SIZE,
 				&ifx_dev->tx_bus,
 				GFP_KERNEL);
@@ -999,7 +1016,7 @@ static int ifx_spi_spi_probe(struct spi_device *spi)
 		ret = -ENOMEM;
 		goto error_ret;
 	}
-	ifx_dev->rx_buffer = dma_alloc_coherent(&ifx_dev->spi_dev->dev,
+	ifx_dev->rx_buffer = dma_alloc_coherent(ifx_dev->spi_dev->dev.parent,
 				IFX_SPI_TRANSFER_SIZE,
 				&ifx_dev->rx_bus,
 				GFP_KERNEL);
@@ -1025,18 +1042,11 @@ static int ifx_spi_spi_probe(struct spi_device *spi)
 		goto error_ret;
 	}
 
-	pl_data = (struct ifx_modem_platform_data *)spi->dev.platform_data;
-	if (pl_data) {
-		ifx_dev->gpio.reset = pl_data->rst_pmu;
-		ifx_dev->gpio.po = pl_data->pwr_on;
-		ifx_dev->gpio.mrdy = pl_data->mrdy;
-		ifx_dev->gpio.srdy = pl_data->srdy;
-		ifx_dev->gpio.reset_out = pl_data->rst_out;
-	} else {
-		dev_err(&spi->dev, "missing platform data!");
-		ret = -ENODEV;
-		goto error_ret;
-	}
+	ifx_dev->gpio.reset = pl_data->rst_pmu;
+	ifx_dev->gpio.po = pl_data->pwr_on;
+	ifx_dev->gpio.mrdy = pl_data->mrdy;
+	ifx_dev->gpio.srdy = pl_data->srdy;
+	ifx_dev->gpio.reset_out = pl_data->rst_out;
 
 	dev_info(&spi->dev, "gpios %d, %d, %d, %d, %d",
 		 ifx_dev->gpio.reset, ifx_dev->gpio.po, ifx_dev->gpio.mrdy,
@@ -1322,9 +1332,9 @@ static const struct spi_device_id ifx_id_table[] = {
 MODULE_DEVICE_TABLE(spi, ifx_id_table);
 
 /* spi operations */
-static const struct spi_driver ifx_spi_driver_6160 = {
+static const struct spi_driver ifx_spi_driver = {
 	.driver = {
-		.name = "ifx6160",
+		.name = DRVNAME,
 		.bus = &spi_bus_type,
 		.pm = &ifx_spi_pm,
 		.owner = THIS_MODULE},
@@ -1346,7 +1356,7 @@ static void __exit ifx_spi_exit(void)
 {
 	/* unregister */
 	tty_unregister_driver(tty_drv);
-	spi_unregister_driver((void *)&ifx_spi_driver_6160);
+	spi_unregister_driver((void *)&ifx_spi_driver);
 }
 
 /**
@@ -1388,7 +1398,7 @@ static int __init ifx_spi_init(void)
 		return result;
 	}
 
-	result = spi_register_driver((void *)&ifx_spi_driver_6160);
+	result = spi_register_driver((void *)&ifx_spi_driver);
 	if (result) {
 		pr_err("%s: spi_register_driver failed(%d)",
 			DRVNAME, result);
diff --git a/drivers/tty/serial/ifx6x60.h b/drivers/tty/serial/ifx6x60.h
index deb7b8d977dc..e8464baf9e75 100644
--- a/drivers/tty/serial/ifx6x60.h
+++ b/drivers/tty/serial/ifx6x60.h
@@ -29,8 +29,6 @@
 #define DRVNAME				"ifx6x60"
 #define TTYNAME				"ttyIFX"
 
-/* #define IFX_THROTTLE_CODE */
-
 #define IFX_SPI_MAX_MINORS		1
 #define IFX_SPI_TRANSFER_SIZE		2048
 #define IFX_SPI_FIFO_SIZE		4096
@@ -88,7 +86,9 @@ struct ifx_spi_device {
 	dma_addr_t rx_dma;
 	dma_addr_t tx_dma;
 
-	int is_6160;				/* Modem type */
+	int modem;		/* Modem type */
+	int use_dma;		/* provide dma-able addrs in SPI msg */
+	long max_hz;		/* max SPI frequency */
 
 	spinlock_t write_lock;
 	int write_pending;
diff --git a/drivers/tty/serial/mfd.c b/drivers/tty/serial/mfd.c
index d40010a22ecd..c111f36f5d21 100644
--- a/drivers/tty/serial/mfd.c
+++ b/drivers/tty/serial/mfd.c
@@ -16,9 +16,7 @@
  *    2/3 chan to port 1, 4/5 chan to port 3. Even number chans
  *    are used for RX, odd chans for TX
  *
- * 2. In A0 stepping, UART will not support TX half empty flag
- *
- * 3. The RI/DSR/DCD/DTR are not pinned out, DCD & DSR are always
+ * 2. The RI/DSR/DCD/DTR are not pinned out, DCD & DSR are always
  *    asserted, only when the HW is reset the DDCD and DDSR will
  *    be triggered
  */
@@ -41,8 +39,6 @@
 #include <linux/io.h>
 #include <linux/debugfs.h>
 
-#define  MFD_HSU_A0_STEPPING	1
-
 #define HSU_DMA_BUF_SIZE	2048
 
 #define chan_readl(chan, offset)	readl(chan->reg + offset)
@@ -51,7 +47,10 @@
 #define mfd_readl(obj, offset)		readl(obj->reg + offset)
 #define mfd_writel(obj, offset, val)	writel(val, obj->reg + offset)
 
-#define HSU_DMA_TIMEOUT_CHECK_FREQ	(HZ/10)
+static int hsu_dma_enable;
+module_param(hsu_dma_enable, int, 0);
+MODULE_PARM_DESC(hsu_dma_enable, "It is a bitmap to set working mode, if \
+bit[x] is 1, then port[x] will work in DMA mode, otherwise in PIO mode.");
 
 struct hsu_dma_buffer {
 	u8		*buf;
@@ -65,7 +64,6 @@ struct hsu_dma_chan {
 	enum dma_data_direction	dirt;
 	struct uart_hsu_port	*uport;
 	void __iomem		*reg;
-	struct timer_list	rx_timer; /* only needed by RX channel */
 };
 
 struct uart_hsu_port {
@@ -355,8 +353,6 @@ void hsu_dma_start_rx_chan(struct hsu_dma_chan *rxc, struct hsu_dma_buffer *dbuf
 					 | (0x1 << 24)	/* timeout bit, see HSU Errata 1 */
 					 );
 	chan_writel(rxc, HSU_CH_CR, 0x3);
-
-	mod_timer(&rxc->rx_timer, jiffies + HSU_DMA_TIMEOUT_CHECK_FREQ);
 }
 
 /* Protected by spin_lock_irqsave(port->lock) */
@@ -420,7 +416,6 @@ void hsu_dma_rx(struct uart_hsu_port *up, u32 int_sts)
 		chan_writel(chan, HSU_CH_CR, 0x3);
 		return;
 	}
-	del_timer(&chan->rx_timer);
 
 	dma_sync_single_for_cpu(port->dev, dbuf->dma_addr,
 			dbuf->dma_size, DMA_FROM_DEVICE);
@@ -448,8 +443,6 @@ void hsu_dma_rx(struct uart_hsu_port *up, u32 int_sts)
 	tty_flip_buffer_push(tty);
 
 	chan_writel(chan, HSU_CH_CR, 0x3);
-	chan->rx_timer.expires = jiffies + HSU_DMA_TIMEOUT_CHECK_FREQ;
-	add_timer(&chan->rx_timer);
 
 }
 
@@ -551,16 +544,9 @@ static void transmit_chars(struct uart_hsu_port *up)
 		return;
 	}
 
-#ifndef MFD_HSU_A0_STEPPING
+	/* The IRQ is for TX FIFO half-empty */
 	count = up->port.fifosize / 2;
-#else
-	/*
-	 * A0 only supports fully empty IRQ, and the first char written
-	 * into it won't clear the EMPT bit, so we may need be cautious
-	 * by useing a shorter buffer
-	 */
-	count = up->port.fifosize - 4;
-#endif
+
 	do {
 		serial_out(up, UART_TX, xmit->buf[xmit->tail]);
 		xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
@@ -769,9 +755,8 @@ static void serial_hsu_break_ctl(struct uart_port *port, int break_state)
 /*
  * What special to do:
  * 1. chose the 64B fifo mode
- * 2. make sure not to select half empty mode for A0 stepping
- * 3. start dma or pio depends on configuration
- * 4. we only allocate dma memory when needed
+ * 2. start dma or pio depends on configuration
+ * 3. we only allocate dma memory when needed
  */
 static int serial_hsu_startup(struct uart_port *port)
 {
@@ -870,8 +855,6 @@ static void serial_hsu_shutdown(struct uart_port *port)
 		container_of(port, struct uart_hsu_port, port);
 	unsigned long flags;
 
-	del_timer_sync(&up->rxc->rx_timer);
-
 	/* Disable interrupts from this port */
 	up->ier = 0;
 	serial_out(up, UART_IER, 0);
@@ -977,10 +960,6 @@ serial_hsu_set_termios(struct uart_port *port, struct ktermios *termios,
 		fcr = UART_FCR_ENABLE_FIFO | UART_FCR_HSU_64_32B;
 
 	fcr |= UART_FCR_HSU_64B_FIFO;
-#ifdef MFD_HSU_A0_STEPPING
-	/* A0 doesn't support half empty IRQ */
-	fcr |= UART_FCR_FULL_EMPT_TXI;
-#endif
 
 	/*
 	 * Ok, we're now changing the port state.  Do it with
@@ -1343,28 +1322,6 @@ err_disable:
 	return ret;
 }
 
-static void hsu_dma_rx_timeout(unsigned long data)
-{
-	struct hsu_dma_chan *chan = (void *)data;
-	struct uart_hsu_port *up = chan->uport;
-	struct hsu_dma_buffer *dbuf = &up->rxbuf;
-	int count = 0;
-	unsigned long flags;
-
-	spin_lock_irqsave(&up->port.lock, flags);
-
-	count = chan_readl(chan, HSU_CH_D0SAR) - dbuf->dma_addr;
-
-	if (!count) {
-		mod_timer(&chan->rx_timer, jiffies + HSU_DMA_TIMEOUT_CHECK_FREQ);
-		goto exit;
-	}
-
-	hsu_dma_rx(up, 0);
-exit:
-	spin_unlock_irqrestore(&up->port.lock, flags);
-}
-
 static void hsu_global_init(void)
 {
 	struct hsu_port *hsu;
@@ -1415,6 +1372,12 @@ static void hsu_global_init(void)
 
 		serial_hsu_ports[i] = uport;
 		uport->index = i;
+
+		if (hsu_dma_enable & (1<<i))
+			uport->use_dma = 1;
+		else
+			uport->use_dma = 0;
+
 		uport++;
 	}
 
@@ -1427,12 +1390,6 @@ static void hsu_global_init(void)
 		dchan->reg = hsu->reg + HSU_DMA_CHANS_REG_OFFSET +
 				i * HSU_DMA_CHANS_REG_LENGTH;
 
-		/* Work around for RX */
-		if (dchan->dirt == DMA_FROM_DEVICE) {
-			init_timer(&dchan->rx_timer);
-			dchan->rx_timer.function = hsu_dma_rx_timeout;
-			dchan->rx_timer.data = (unsigned long)dchan;
-		}
 		dchan++;
 	}
 
diff --git a/drivers/tty/serial/mrst_max3110.c b/drivers/tty/serial/mrst_max3110.c
index b62857bf2fdb..37e13c3d91d9 100644
--- a/drivers/tty/serial/mrst_max3110.c
+++ b/drivers/tty/serial/mrst_max3110.c
@@ -51,7 +51,7 @@
 struct uart_max3110 {
 	struct uart_port port;
 	struct spi_device *spi;
-	char name[24];
+	char name[SPI_NAME_SIZE];
 
 	wait_queue_head_t wq;
 	struct task_struct *main_thread;
diff --git a/drivers/tty/serial/msm_serial_hs.c b/drivers/tty/serial/msm_serial_hs.c
new file mode 100644
index 000000000000..2e7fc9cee9cc
--- /dev/null
+++ b/drivers/tty/serial/msm_serial_hs.c
@@ -0,0 +1,1880 @@
+/*
+ * MSM 7k/8k High speed uart driver
+ *
+ * Copyright (c) 2007-2011, Code Aurora Forum. All rights reserved.
+ * Copyright (c) 2008 Google Inc.
+ * Modified: Nick Pelly <npelly@google.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+ * See the GNU General Public License for more details.
+ *
+ * Has optional support for uart power management independent of linux
+ * suspend/resume:
+ *
+ * RX wakeup.
+ * UART wakeup can be triggered by RX activity (using a wakeup GPIO on the
+ * UART RX pin). This should only be used if there is not a wakeup
+ * GPIO on the UART CTS, and the first RX byte is known (for example, with the
+ * Bluetooth Texas Instruments HCILL protocol), since the first RX byte will
+ * always be lost. RTS will be asserted even while the UART is off in this mode
+ * of operation. See msm_serial_hs_platform_data.rx_wakeup_irq.
+ */
+
+#include <linux/module.h>
+
+#include <linux/serial.h>
+#include <linux/serial_core.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/ioport.h>
+#include <linux/kernel.h>
+#include <linux/timer.h>
+#include <linux/clk.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/dma-mapping.h>
+#include <linux/dmapool.h>
+#include <linux/wait.h>
+#include <linux/workqueue.h>
+
+#include <linux/atomic.h>
+#include <asm/irq.h>
+#include <asm/system.h>
+
+#include <mach/hardware.h>
+#include <mach/dma.h>
+#include <linux/platform_data/msm_serial_hs.h>
+
+/* HSUART Registers */
+#define UARTDM_MR1_ADDR 0x0
+#define UARTDM_MR2_ADDR 0x4
+
+/* Data Mover result codes */
+#define RSLT_FIFO_CNTR_BMSK (0xE << 28)
+#define RSLT_VLD            BIT(1)
+
+/* write only register */
+#define UARTDM_CSR_ADDR 0x8
+#define UARTDM_CSR_115200 0xFF
+#define UARTDM_CSR_57600  0xEE
+#define UARTDM_CSR_38400  0xDD
+#define UARTDM_CSR_28800  0xCC
+#define UARTDM_CSR_19200  0xBB
+#define UARTDM_CSR_14400  0xAA
+#define UARTDM_CSR_9600   0x99
+#define UARTDM_CSR_7200   0x88
+#define UARTDM_CSR_4800   0x77
+#define UARTDM_CSR_3600   0x66
+#define UARTDM_CSR_2400   0x55
+#define UARTDM_CSR_1200   0x44
+#define UARTDM_CSR_600    0x33
+#define UARTDM_CSR_300    0x22
+#define UARTDM_CSR_150    0x11
+#define UARTDM_CSR_75     0x00
+
+/* write only register */
+#define UARTDM_TF_ADDR 0x70
+#define UARTDM_TF2_ADDR 0x74
+#define UARTDM_TF3_ADDR 0x78
+#define UARTDM_TF4_ADDR 0x7C
+
+/* write only register */
+#define UARTDM_CR_ADDR 0x10
+#define UARTDM_IMR_ADDR 0x14
+
+#define UARTDM_IPR_ADDR 0x18
+#define UARTDM_TFWR_ADDR 0x1c
+#define UARTDM_RFWR_ADDR 0x20
+#define UARTDM_HCR_ADDR 0x24
+#define UARTDM_DMRX_ADDR 0x34
+#define UARTDM_IRDA_ADDR 0x38
+#define UARTDM_DMEN_ADDR 0x3c
+
+/* UART_DM_NO_CHARS_FOR_TX */
+#define UARTDM_NCF_TX_ADDR 0x40
+
+#define UARTDM_BADR_ADDR 0x44
+
+#define UARTDM_SIM_CFG_ADDR 0x80
+/* Read Only register */
+#define UARTDM_SR_ADDR 0x8
+
+/* Read Only register */
+#define UARTDM_RF_ADDR  0x70
+#define UARTDM_RF2_ADDR 0x74
+#define UARTDM_RF3_ADDR 0x78
+#define UARTDM_RF4_ADDR 0x7C
+
+/* Read Only register */
+#define UARTDM_MISR_ADDR 0x10
+
+/* Read Only register */
+#define UARTDM_ISR_ADDR 0x14
+#define UARTDM_RX_TOTAL_SNAP_ADDR 0x38
+
+#define UARTDM_RXFS_ADDR 0x50
+
+/* Register field Mask Mapping */
+#define UARTDM_SR_PAR_FRAME_BMSK        BIT(5)
+#define UARTDM_SR_OVERRUN_BMSK          BIT(4)
+#define UARTDM_SR_TXEMT_BMSK            BIT(3)
+#define UARTDM_SR_TXRDY_BMSK            BIT(2)
+#define UARTDM_SR_RXRDY_BMSK            BIT(0)
+
+#define UARTDM_CR_TX_DISABLE_BMSK       BIT(3)
+#define UARTDM_CR_RX_DISABLE_BMSK       BIT(1)
+#define UARTDM_CR_TX_EN_BMSK            BIT(2)
+#define UARTDM_CR_RX_EN_BMSK            BIT(0)
+
+/* UARTDM_CR channel_comman bit value (register field is bits 8:4) */
+#define RESET_RX                0x10
+#define RESET_TX                0x20
+#define RESET_ERROR_STATUS      0x30
+#define RESET_BREAK_INT         0x40
+#define START_BREAK             0x50
+#define STOP_BREAK              0x60
+#define RESET_CTS               0x70
+#define RESET_STALE_INT         0x80
+#define RFR_LOW                 0xD0
+#define RFR_HIGH                0xE0
+#define CR_PROTECTION_EN        0x100
+#define STALE_EVENT_ENABLE      0x500
+#define STALE_EVENT_DISABLE     0x600
+#define FORCE_STALE_EVENT       0x400
+#define CLEAR_TX_READY          0x300
+#define RESET_TX_ERROR          0x800
+#define RESET_TX_DONE           0x810
+
+#define UARTDM_MR1_AUTO_RFR_LEVEL1_BMSK 0xffffff00
+#define UARTDM_MR1_AUTO_RFR_LEVEL0_BMSK 0x3f
+#define UARTDM_MR1_CTS_CTL_BMSK 0x40
+#define UARTDM_MR1_RX_RDY_CTL_BMSK 0x80
+
+#define UARTDM_MR2_ERROR_MODE_BMSK 0x40
+#define UARTDM_MR2_BITS_PER_CHAR_BMSK 0x30
+
+/* bits per character configuration */
+#define FIVE_BPC  (0 << 4)
+#define SIX_BPC   (1 << 4)
+#define SEVEN_BPC (2 << 4)
+#define EIGHT_BPC (3 << 4)
+
+#define UARTDM_MR2_STOP_BIT_LEN_BMSK 0xc
+#define STOP_BIT_ONE (1 << 2)
+#define STOP_BIT_TWO (3 << 2)
+
+#define UARTDM_MR2_PARITY_MODE_BMSK 0x3
+
+/* Parity configuration */
+#define NO_PARITY 0x0
+#define EVEN_PARITY 0x1
+#define ODD_PARITY 0x2
+#define SPACE_PARITY 0x3
+
+#define UARTDM_IPR_STALE_TIMEOUT_MSB_BMSK 0xffffff80
+#define UARTDM_IPR_STALE_LSB_BMSK 0x1f
+
+/* These can be used for both ISR and IMR register */
+#define UARTDM_ISR_TX_READY_BMSK        BIT(7)
+#define UARTDM_ISR_CURRENT_CTS_BMSK     BIT(6)
+#define UARTDM_ISR_DELTA_CTS_BMSK       BIT(5)
+#define UARTDM_ISR_RXLEV_BMSK           BIT(4)
+#define UARTDM_ISR_RXSTALE_BMSK         BIT(3)
+#define UARTDM_ISR_RXBREAK_BMSK         BIT(2)
+#define UARTDM_ISR_RXHUNT_BMSK          BIT(1)
+#define UARTDM_ISR_TXLEV_BMSK           BIT(0)
+
+/* Field definitions for UART_DM_DMEN*/
+#define UARTDM_TX_DM_EN_BMSK 0x1
+#define UARTDM_RX_DM_EN_BMSK 0x2
+
+#define UART_FIFOSIZE 64
+#define UARTCLK 7372800
+
+/* Rx DMA request states */
+enum flush_reason {
+	FLUSH_NONE,
+	FLUSH_DATA_READY,
+	FLUSH_DATA_INVALID,  /* values after this indicate invalid data */
+	FLUSH_IGNORE = FLUSH_DATA_INVALID,
+	FLUSH_STOP,
+	FLUSH_SHUTDOWN,
+};
+
+/* UART clock states */
+enum msm_hs_clk_states_e {
+	MSM_HS_CLK_PORT_OFF,     /* port not in use */
+	MSM_HS_CLK_OFF,          /* clock disabled */
+	MSM_HS_CLK_REQUEST_OFF,  /* disable after TX and RX flushed */
+	MSM_HS_CLK_ON,           /* clock enabled */
+};
+
+/* Track the forced RXSTALE flush during clock off sequence.
+ * These states are only valid during MSM_HS_CLK_REQUEST_OFF */
+enum msm_hs_clk_req_off_state_e {
+	CLK_REQ_OFF_START,
+	CLK_REQ_OFF_RXSTALE_ISSUED,
+	CLK_REQ_OFF_FLUSH_ISSUED,
+	CLK_REQ_OFF_RXSTALE_FLUSHED,
+};
+
+/**
+ * struct msm_hs_tx
+ * @tx_ready_int_en: ok to dma more tx?
+ * @dma_in_flight: tx dma in progress
+ * @xfer: top level DMA command pointer structure
+ * @command_ptr: third level command struct pointer
+ * @command_ptr_ptr: second level command list struct pointer
+ * @mapped_cmd_ptr: DMA view of third level command struct
+ * @mapped_cmd_ptr_ptr: DMA view of second level command list struct
+ * @tx_count: number of bytes to transfer in DMA transfer
+ * @dma_base: DMA view of UART xmit buffer
+ *
+ * This structure describes a single Tx DMA transaction. MSM DMA
+ * commands have two levels of indirection. The top level command
+ * ptr points to a list of command ptr which in turn points to a
+ * single DMA 'command'. In our case each Tx transaction consists
+ * of a single second level pointer pointing to a 'box type' command.
+ */
+struct msm_hs_tx {
+	unsigned int tx_ready_int_en;
+	unsigned int dma_in_flight;
+	struct msm_dmov_cmd xfer;
+	dmov_box *command_ptr;
+	u32 *command_ptr_ptr;
+	dma_addr_t mapped_cmd_ptr;
+	dma_addr_t mapped_cmd_ptr_ptr;
+	int tx_count;
+	dma_addr_t dma_base;
+};
+
+/**
+ * struct msm_hs_rx
+ * @flush: Rx DMA request state
+ * @xfer: top level DMA command pointer structure
+ * @cmdptr_dmaaddr: DMA view of second level command structure
+ * @command_ptr: third level DMA command pointer structure
+ * @command_ptr_ptr: second level DMA command list pointer
+ * @mapped_cmd_ptr: DMA view of the third level command structure
+ * @wait: wait for DMA completion before shutdown
+ * @buffer: destination buffer for RX DMA
+ * @rbuffer: DMA view of buffer
+ * @pool: dma pool out of which coherent rx buffer is allocated
+ * @tty_work: private work-queue for tty flip buffer push task
+ *
+ * This structure describes a single Rx DMA transaction. Rx DMA
+ * transactions use box mode DMA commands.
+ */
+struct msm_hs_rx {
+	enum flush_reason flush;
+	struct msm_dmov_cmd xfer;
+	dma_addr_t cmdptr_dmaaddr;
+	dmov_box *command_ptr;
+	u32 *command_ptr_ptr;
+	dma_addr_t mapped_cmd_ptr;
+	wait_queue_head_t wait;
+	dma_addr_t rbuffer;
+	unsigned char *buffer;
+	struct dma_pool *pool;
+	struct work_struct tty_work;
+};
+
+/**
+ * struct msm_hs_rx_wakeup
+ * @irq: IRQ line to be configured as interrupt source on Rx activity
+ * @ignore: boolean value. 1 = ignore the wakeup interrupt
+ * @rx_to_inject: extra character to be inserted to Rx tty on wakeup
+ * @inject_rx: 1 = insert rx_to_inject. 0 = do not insert extra character
+ *
+ * This is an optional structure required for UART Rx GPIO IRQ based
+ * wakeup from low power state. UART wakeup can be triggered by RX activity
+ * (using a wakeup GPIO on the UART RX pin). This should only be used if
+ * there is not a wakeup GPIO on the UART CTS, and the first RX byte is
+ * known (eg., with the Bluetooth Texas Instruments HCILL protocol),
+ * since the first RX byte will always be lost. RTS will be asserted even
+ * while the UART is clocked off in this mode of operation.
+ */
+struct msm_hs_rx_wakeup {
+	int irq;  /* < 0 indicates low power wakeup disabled */
+	unsigned char ignore;
+	unsigned char inject_rx;
+	char rx_to_inject;
+};
+
+/**
+ * struct msm_hs_port
+ * @uport: embedded uart port structure
+ * @imr_reg: shadow value of UARTDM_IMR
+ * @clk: uart input clock handle
+ * @tx: Tx transaction related data structure
+ * @rx: Rx transaction related data structure
+ * @dma_tx_channel: Tx DMA command channel
+ * @dma_rx_channel Rx DMA command channel
+ * @dma_tx_crci: Tx channel rate control interface number
+ * @dma_rx_crci: Rx channel rate control interface number
+ * @clk_off_timer: Timer to poll DMA event completion before clock off
+ * @clk_off_delay: clk_off_timer poll interval
+ * @clk_state: overall clock state
+ * @clk_req_off_state: post flush clock states
+ * @rx_wakeup: optional rx_wakeup feature related data
+ * @exit_lpm_cb: optional callback to exit low power mode
+ *
+ * Low level serial port structure.
+ */
+struct msm_hs_port {
+	struct uart_port uport;
+	unsigned long imr_reg;
+	struct clk *clk;
+	struct msm_hs_tx tx;
+	struct msm_hs_rx rx;
+
+	int dma_tx_channel;
+	int dma_rx_channel;
+	int dma_tx_crci;
+	int dma_rx_crci;
+
+	struct hrtimer clk_off_timer;
+	ktime_t clk_off_delay;
+	enum msm_hs_clk_states_e clk_state;
+	enum msm_hs_clk_req_off_state_e clk_req_off_state;
+
+	struct msm_hs_rx_wakeup rx_wakeup;
+	void (*exit_lpm_cb)(struct uart_port *);
+};
+
+#define MSM_UARTDM_BURST_SIZE 16   /* DM burst size (in bytes) */
+#define UARTDM_TX_BUF_SIZE UART_XMIT_SIZE
+#define UARTDM_RX_BUF_SIZE 512
+
+#define UARTDM_NR 2
+
+static struct msm_hs_port q_uart_port[UARTDM_NR];
+static struct platform_driver msm_serial_hs_platform_driver;
+static struct uart_driver msm_hs_driver;
+static struct uart_ops msm_hs_ops;
+static struct workqueue_struct *msm_hs_workqueue;
+
+#define UARTDM_TO_MSM(uart_port) \
+	container_of((uart_port), struct msm_hs_port, uport)
+
+static unsigned int use_low_power_rx_wakeup(struct msm_hs_port
+						   *msm_uport)
+{
+	return (msm_uport->rx_wakeup.irq >= 0);
+}
+
+static unsigned int msm_hs_read(struct uart_port *uport,
+				       unsigned int offset)
+{
+	return ioread32(uport->membase + offset);
+}
+
+static void msm_hs_write(struct uart_port *uport, unsigned int offset,
+				 unsigned int value)
+{
+	iowrite32(value, uport->membase + offset);
+}
+
+static void msm_hs_release_port(struct uart_port *port)
+{
+	iounmap(port->membase);
+}
+
+static int msm_hs_request_port(struct uart_port *port)
+{
+	port->membase = ioremap(port->mapbase, PAGE_SIZE);
+	if (unlikely(!port->membase))
+		return -ENOMEM;
+
+	/* configure the CR Protection to Enable */
+	msm_hs_write(port, UARTDM_CR_ADDR, CR_PROTECTION_EN);
+	return 0;
+}
+
+static int __devexit msm_hs_remove(struct platform_device *pdev)
+{
+
+	struct msm_hs_port *msm_uport;
+	struct device *dev;
+
+	if (pdev->id < 0 || pdev->id >= UARTDM_NR) {
+		printk(KERN_ERR "Invalid plaform device ID = %d\n", pdev->id);
+		return -EINVAL;
+	}
+
+	msm_uport = &q_uart_port[pdev->id];
+	dev = msm_uport->uport.dev;
+
+	dma_unmap_single(dev, msm_uport->rx.mapped_cmd_ptr, sizeof(dmov_box),
+			 DMA_TO_DEVICE);
+	dma_pool_free(msm_uport->rx.pool, msm_uport->rx.buffer,
+		      msm_uport->rx.rbuffer);
+	dma_pool_destroy(msm_uport->rx.pool);
+
+	dma_unmap_single(dev, msm_uport->rx.cmdptr_dmaaddr, sizeof(u32 *),
+			 DMA_TO_DEVICE);
+	dma_unmap_single(dev, msm_uport->tx.mapped_cmd_ptr_ptr, sizeof(u32 *),
+			 DMA_TO_DEVICE);
+	dma_unmap_single(dev, msm_uport->tx.mapped_cmd_ptr, sizeof(dmov_box),
+			 DMA_TO_DEVICE);
+
+	uart_remove_one_port(&msm_hs_driver, &msm_uport->uport);
+	clk_put(msm_uport->clk);
+
+	/* Free the tx resources */
+	kfree(msm_uport->tx.command_ptr);
+	kfree(msm_uport->tx.command_ptr_ptr);
+
+	/* Free the rx resources */
+	kfree(msm_uport->rx.command_ptr);
+	kfree(msm_uport->rx.command_ptr_ptr);
+
+	iounmap(msm_uport->uport.membase);
+
+	return 0;
+}
+
+static int msm_hs_init_clk_locked(struct uart_port *uport)
+{
+	int ret;
+	struct msm_hs_port *msm_uport = UARTDM_TO_MSM(uport);
+
+	ret = clk_enable(msm_uport->clk);
+	if (ret) {
+		printk(KERN_ERR "Error could not turn on UART clk\n");
+		return ret;
+	}
+
+	/* Set up the MREG/NREG/DREG/MNDREG */
+	ret = clk_set_rate(msm_uport->clk, uport->uartclk);
+	if (ret) {
+		printk(KERN_WARNING "Error setting clock rate on UART\n");
+		clk_disable(msm_uport->clk);
+		return ret;
+	}
+
+	msm_uport->clk_state = MSM_HS_CLK_ON;
+	return 0;
+}
+
+/* Enable and Disable clocks  (Used for power management) */
+static void msm_hs_pm(struct uart_port *uport, unsigned int state,
+		      unsigned int oldstate)
+{
+	struct msm_hs_port *msm_uport = UARTDM_TO_MSM(uport);
+
+	if (use_low_power_rx_wakeup(msm_uport) ||
+	    msm_uport->exit_lpm_cb)
+		return;  /* ignore linux PM states,
+			    use msm_hs_request_clock API */
+
+	switch (state) {
+	case 0:
+		clk_enable(msm_uport->clk);
+		break;
+	case 3:
+		clk_disable(msm_uport->clk);
+		break;
+	default:
+		dev_err(uport->dev, "msm_serial: Unknown PM state %d\n",
+			state);
+	}
+}
+
+/*
+ * programs the UARTDM_CSR register with correct bit rates
+ *
+ * Interrupts should be disabled before we are called, as
+ * we modify Set Baud rate
+ * Set receive stale interrupt level, dependant on Bit Rate
+ * Goal is to have around 8 ms before indicate stale.
+ * roundup (((Bit Rate * .008) / 10) + 1
+ */
+static void msm_hs_set_bps_locked(struct uart_port *uport,
+				  unsigned int bps)
+{
+	unsigned long rxstale;
+	unsigned long data;
+	struct msm_hs_port *msm_uport = UARTDM_TO_MSM(uport);
+
+	switch (bps) {
+	case 300:
+		msm_hs_write(uport, UARTDM_CSR_ADDR, UARTDM_CSR_75);
+		rxstale = 1;
+		break;
+	case 600:
+		msm_hs_write(uport, UARTDM_CSR_ADDR, UARTDM_CSR_150);
+		rxstale = 1;
+		break;
+	case 1200:
+		msm_hs_write(uport, UARTDM_CSR_ADDR, UARTDM_CSR_300);
+		rxstale = 1;
+		break;
+	case 2400:
+		msm_hs_write(uport, UARTDM_CSR_ADDR, UARTDM_CSR_600);
+		rxstale = 1;
+		break;
+	case 4800:
+		msm_hs_write(uport, UARTDM_CSR_ADDR, UARTDM_CSR_1200);
+		rxstale = 1;
+		break;
+	case 9600:
+		msm_hs_write(uport, UARTDM_CSR_ADDR, UARTDM_CSR_2400);
+		rxstale = 2;
+		break;
+	case 14400:
+		msm_hs_write(uport, UARTDM_CSR_ADDR, UARTDM_CSR_3600);
+		rxstale = 3;
+		break;
+	case 19200:
+		msm_hs_write(uport, UARTDM_CSR_ADDR, UARTDM_CSR_4800);
+		rxstale = 4;
+		break;
+	case 28800:
+		msm_hs_write(uport, UARTDM_CSR_ADDR, UARTDM_CSR_7200);
+		rxstale = 6;
+		break;
+	case 38400:
+		msm_hs_write(uport, UARTDM_CSR_ADDR, UARTDM_CSR_9600);
+		rxstale = 8;
+		break;
+	case 57600:
+		msm_hs_write(uport, UARTDM_CSR_ADDR, UARTDM_CSR_14400);
+		rxstale = 16;
+		break;
+	case 76800:
+		msm_hs_write(uport, UARTDM_CSR_ADDR, UARTDM_CSR_19200);
+		rxstale = 16;
+		break;
+	case 115200:
+		msm_hs_write(uport, UARTDM_CSR_ADDR, UARTDM_CSR_28800);
+		rxstale = 31;
+		break;
+	case 230400:
+		msm_hs_write(uport, UARTDM_CSR_ADDR, UARTDM_CSR_57600);
+		rxstale = 31;
+		break;
+	case 460800:
+		msm_hs_write(uport, UARTDM_CSR_ADDR, UARTDM_CSR_115200);
+		rxstale = 31;
+		break;
+	case 4000000:
+	case 3686400:
+	case 3200000:
+	case 3500000:
+	case 3000000:
+	case 2500000:
+	case 1500000:
+	case 1152000:
+	case 1000000:
+	case 921600:
+		msm_hs_write(uport, UARTDM_CSR_ADDR, UARTDM_CSR_115200);
+		rxstale = 31;
+		break;
+	default:
+		msm_hs_write(uport, UARTDM_CSR_ADDR, UARTDM_CSR_2400);
+		/* default to 9600 */
+		bps = 9600;
+		rxstale = 2;
+		break;
+	}
+	if (bps > 460800)
+		uport->uartclk = bps * 16;
+	else
+		uport->uartclk = UARTCLK;
+
+	if (clk_set_rate(msm_uport->clk, uport->uartclk)) {
+		printk(KERN_WARNING "Error setting clock rate on UART\n");
+		return;
+	}
+
+	data = rxstale & UARTDM_IPR_STALE_LSB_BMSK;
+	data |= UARTDM_IPR_STALE_TIMEOUT_MSB_BMSK & (rxstale << 2);
+
+	msm_hs_write(uport, UARTDM_IPR_ADDR, data);
+}
+
+/*
+ * termios :  new ktermios
+ * oldtermios:  old ktermios previous setting
+ *
+ * Configure the serial port
+ */
+static void msm_hs_set_termios(struct uart_port *uport,
+			       struct ktermios *termios,
+			       struct ktermios *oldtermios)
+{
+	unsigned int bps;
+	unsigned long data;
+	unsigned long flags;
+	unsigned int c_cflag = termios->c_cflag;
+	struct msm_hs_port *msm_uport = UARTDM_TO_MSM(uport);
+
+	spin_lock_irqsave(&uport->lock, flags);
+	clk_enable(msm_uport->clk);
+
+	/* 300 is the minimum baud support by the driver  */
+	bps = uart_get_baud_rate(uport, termios, oldtermios, 200, 4000000);
+
+	/* Temporary remapping  200 BAUD to 3.2 mbps */
+	if (bps == 200)
+		bps = 3200000;
+
+	msm_hs_set_bps_locked(uport, bps);
+
+	data = msm_hs_read(uport, UARTDM_MR2_ADDR);
+	data &= ~UARTDM_MR2_PARITY_MODE_BMSK;
+	/* set parity */
+	if (PARENB == (c_cflag & PARENB)) {
+		if (PARODD == (c_cflag & PARODD))
+			data |= ODD_PARITY;
+		else if (CMSPAR == (c_cflag & CMSPAR))
+			data |= SPACE_PARITY;
+		else
+			data |= EVEN_PARITY;
+	}
+
+	/* Set bits per char */
+	data &= ~UARTDM_MR2_BITS_PER_CHAR_BMSK;
+
+	switch (c_cflag & CSIZE) {
+	case CS5:
+		data |= FIVE_BPC;
+		break;
+	case CS6:
+		data |= SIX_BPC;
+		break;
+	case CS7:
+		data |= SEVEN_BPC;
+		break;
+	default:
+		data |= EIGHT_BPC;
+		break;
+	}
+	/* stop bits */
+	if (c_cflag & CSTOPB) {
+		data |= STOP_BIT_TWO;
+	} else {
+		/* otherwise 1 stop bit */
+		data |= STOP_BIT_ONE;
+	}
+	data |= UARTDM_MR2_ERROR_MODE_BMSK;
+	/* write parity/bits per char/stop bit configuration */
+	msm_hs_write(uport, UARTDM_MR2_ADDR, data);
+
+	/* Configure HW flow control */
+	data = msm_hs_read(uport, UARTDM_MR1_ADDR);
+
+	data &= ~(UARTDM_MR1_CTS_CTL_BMSK | UARTDM_MR1_RX_RDY_CTL_BMSK);
+
+	if (c_cflag & CRTSCTS) {
+		data |= UARTDM_MR1_CTS_CTL_BMSK;
+		data |= UARTDM_MR1_RX_RDY_CTL_BMSK;
+	}
+
+	msm_hs_write(uport, UARTDM_MR1_ADDR, data);
+
+	uport->ignore_status_mask = termios->c_iflag & INPCK;
+	uport->ignore_status_mask |= termios->c_iflag & IGNPAR;
+	uport->read_status_mask = (termios->c_cflag & CREAD);
+
+	msm_hs_write(uport, UARTDM_IMR_ADDR, 0);
+
+	/* Set Transmit software time out */
+	uart_update_timeout(uport, c_cflag, bps);
+
+	msm_hs_write(uport, UARTDM_CR_ADDR, RESET_RX);
+	msm_hs_write(uport, UARTDM_CR_ADDR, RESET_TX);
+
+	if (msm_uport->rx.flush == FLUSH_NONE) {
+		msm_uport->rx.flush = FLUSH_IGNORE;
+		msm_dmov_stop_cmd(msm_uport->dma_rx_channel, NULL, 1);
+	}
+
+	msm_hs_write(uport, UARTDM_IMR_ADDR, msm_uport->imr_reg);
+
+	clk_disable(msm_uport->clk);
+	spin_unlock_irqrestore(&uport->lock, flags);
+}
+
+/*
+ *  Standard API, Transmitter
+ *  Any character in the transmit shift register is sent
+ */
+static unsigned int msm_hs_tx_empty(struct uart_port *uport)
+{
+	unsigned int data;
+	unsigned int ret = 0;
+	struct msm_hs_port *msm_uport = UARTDM_TO_MSM(uport);
+
+	clk_enable(msm_uport->clk);
+
+	data = msm_hs_read(uport, UARTDM_SR_ADDR);
+	if (data & UARTDM_SR_TXEMT_BMSK)
+		ret = TIOCSER_TEMT;
+
+	clk_disable(msm_uport->clk);
+
+	return ret;
+}
+
+/*
+ *  Standard API, Stop transmitter.
+ *  Any character in the transmit shift register is sent as
+ *  well as the current data mover transfer .
+ */
+static void msm_hs_stop_tx_locked(struct uart_port *uport)
+{
+	struct msm_hs_port *msm_uport = UARTDM_TO_MSM(uport);
+
+	msm_uport->tx.tx_ready_int_en = 0;
+}
+
+/*
+ *  Standard API, Stop receiver as soon as possible.
+ *
+ *  Function immediately terminates the operation of the
+ *  channel receiver and any incoming characters are lost. None
+ *  of the receiver status bits are affected by this command and
+ *  characters that are already in the receive FIFO there.
+ */
+static void msm_hs_stop_rx_locked(struct uart_port *uport)
+{
+	struct msm_hs_port *msm_uport = UARTDM_TO_MSM(uport);
+	unsigned int data;
+
+	clk_enable(msm_uport->clk);
+
+	/* disable dlink */
+	data = msm_hs_read(uport, UARTDM_DMEN_ADDR);
+	data &= ~UARTDM_RX_DM_EN_BMSK;
+	msm_hs_write(uport, UARTDM_DMEN_ADDR, data);
+
+	/* Disable the receiver */
+	if (msm_uport->rx.flush == FLUSH_NONE)
+		msm_dmov_stop_cmd(msm_uport->dma_rx_channel, NULL, 1);
+
+	if (msm_uport->rx.flush != FLUSH_SHUTDOWN)
+		msm_uport->rx.flush = FLUSH_STOP;
+
+	clk_disable(msm_uport->clk);
+}
+
+/*  Transmit the next chunk of data */
+static void msm_hs_submit_tx_locked(struct uart_port *uport)
+{
+	int left;
+	int tx_count;
+	dma_addr_t src_addr;
+	struct msm_hs_port *msm_uport = UARTDM_TO_MSM(uport);
+	struct msm_hs_tx *tx = &msm_uport->tx;
+	struct circ_buf *tx_buf = &msm_uport->uport.state->xmit;
+
+	if (uart_circ_empty(tx_buf) || uport->state->port.tty->stopped) {
+		msm_hs_stop_tx_locked(uport);
+		return;
+	}
+
+	tx->dma_in_flight = 1;
+
+	tx_count = uart_circ_chars_pending(tx_buf);
+
+	if (UARTDM_TX_BUF_SIZE < tx_count)
+		tx_count = UARTDM_TX_BUF_SIZE;
+
+	left = UART_XMIT_SIZE - tx_buf->tail;
+
+	if (tx_count > left)
+		tx_count = left;
+
+	src_addr = tx->dma_base + tx_buf->tail;
+	dma_sync_single_for_device(uport->dev, src_addr, tx_count,
+				   DMA_TO_DEVICE);
+
+	tx->command_ptr->num_rows = (((tx_count + 15) >> 4) << 16) |
+				     ((tx_count + 15) >> 4);
+	tx->command_ptr->src_row_addr = src_addr;
+
+	dma_sync_single_for_device(uport->dev, tx->mapped_cmd_ptr,
+				   sizeof(dmov_box), DMA_TO_DEVICE);
+
+	*tx->command_ptr_ptr = CMD_PTR_LP | DMOV_CMD_ADDR(tx->mapped_cmd_ptr);
+
+	dma_sync_single_for_device(uport->dev, tx->mapped_cmd_ptr_ptr,
+				   sizeof(u32 *), DMA_TO_DEVICE);
+
+	/* Save tx_count to use in Callback */
+	tx->tx_count = tx_count;
+	msm_hs_write(uport, UARTDM_NCF_TX_ADDR, tx_count);
+
+	/* Disable the tx_ready interrupt */
+	msm_uport->imr_reg &= ~UARTDM_ISR_TX_READY_BMSK;
+	msm_hs_write(uport, UARTDM_IMR_ADDR, msm_uport->imr_reg);
+	msm_dmov_enqueue_cmd(msm_uport->dma_tx_channel, &tx->xfer);
+}
+
+/* Start to receive the next chunk of data */
+static void msm_hs_start_rx_locked(struct uart_port *uport)
+{
+	struct msm_hs_port *msm_uport = UARTDM_TO_MSM(uport);
+
+	msm_hs_write(uport, UARTDM_CR_ADDR, RESET_STALE_INT);
+	msm_hs_write(uport, UARTDM_DMRX_ADDR, UARTDM_RX_BUF_SIZE);
+	msm_hs_write(uport, UARTDM_CR_ADDR, STALE_EVENT_ENABLE);
+	msm_uport->imr_reg |= UARTDM_ISR_RXLEV_BMSK;
+	msm_hs_write(uport, UARTDM_IMR_ADDR, msm_uport->imr_reg);
+
+	msm_uport->rx.flush = FLUSH_NONE;
+	msm_dmov_enqueue_cmd(msm_uport->dma_rx_channel, &msm_uport->rx.xfer);
+
+	/* might have finished RX and be ready to clock off */
+	hrtimer_start(&msm_uport->clk_off_timer, msm_uport->clk_off_delay,
+			HRTIMER_MODE_REL);
+}
+
+/* Enable the transmitter Interrupt */
+static void msm_hs_start_tx_locked(struct uart_port *uport)
+{
+	struct msm_hs_port *msm_uport = UARTDM_TO_MSM(uport);
+
+	clk_enable(msm_uport->clk);
+
+	if (msm_uport->exit_lpm_cb)
+		msm_uport->exit_lpm_cb(uport);
+
+	if (msm_uport->tx.tx_ready_int_en == 0) {
+		msm_uport->tx.tx_ready_int_en = 1;
+		msm_hs_submit_tx_locked(uport);
+	}
+
+	clk_disable(msm_uport->clk);
+}
+
+/*
+ *  This routine is called when we are done with a DMA transfer
+ *
+ *  This routine is registered with Data mover when we set
+ *  up a Data Mover transfer. It is called from Data mover ISR
+ *  when the DMA transfer is done.
+ */
+static void msm_hs_dmov_tx_callback(struct msm_dmov_cmd *cmd_ptr,
+					unsigned int result,
+					struct msm_dmov_errdata *err)
+{
+	unsigned long flags;
+	struct msm_hs_port *msm_uport;
+
+	/* DMA did not finish properly */
+	WARN_ON((((result & RSLT_FIFO_CNTR_BMSK) >> 28) == 1) &&
+		!(result & RSLT_VLD));
+
+	msm_uport = container_of(cmd_ptr, struct msm_hs_port, tx.xfer);
+
+	spin_lock_irqsave(&msm_uport->uport.lock, flags);
+	clk_enable(msm_uport->clk);
+
+	msm_uport->imr_reg |= UARTDM_ISR_TX_READY_BMSK;
+	msm_hs_write(&msm_uport->uport, UARTDM_IMR_ADDR, msm_uport->imr_reg);
+
+	clk_disable(msm_uport->clk);
+	spin_unlock_irqrestore(&msm_uport->uport.lock, flags);
+}
+
+/*
+ * This routine is called when we are done with a DMA transfer or the
+ * a flush has been sent to the data mover driver.
+ *
+ * This routine is registered with Data mover when we set up a Data Mover
+ *  transfer. It is called from Data mover ISR when the DMA transfer is done.
+ */
+static void msm_hs_dmov_rx_callback(struct msm_dmov_cmd *cmd_ptr,
+					unsigned int result,
+					struct msm_dmov_errdata *err)
+{
+	int retval;
+	int rx_count;
+	unsigned long status;
+	unsigned int error_f = 0;
+	unsigned long flags;
+	unsigned int flush;
+	struct tty_struct *tty;
+	struct uart_port *uport;
+	struct msm_hs_port *msm_uport;
+
+	msm_uport = container_of(cmd_ptr, struct msm_hs_port, rx.xfer);
+	uport = &msm_uport->uport;
+
+	spin_lock_irqsave(&uport->lock, flags);
+	clk_enable(msm_uport->clk);
+
+	tty = uport->state->port.tty;
+
+	msm_hs_write(uport, UARTDM_CR_ADDR, STALE_EVENT_DISABLE);
+
+	status = msm_hs_read(uport, UARTDM_SR_ADDR);
+
+	/* overflow is not connect to data in a FIFO */
+	if (unlikely((status & UARTDM_SR_OVERRUN_BMSK) &&
+		     (uport->read_status_mask & CREAD))) {
+		tty_insert_flip_char(tty, 0, TTY_OVERRUN);
+		uport->icount.buf_overrun++;
+		error_f = 1;
+	}
+
+	if (!(uport->ignore_status_mask & INPCK))
+		status = status & ~(UARTDM_SR_PAR_FRAME_BMSK);
+
+	if (unlikely(status & UARTDM_SR_PAR_FRAME_BMSK)) {
+		/* Can not tell difference between parity & frame error */
+		uport->icount.parity++;
+		error_f = 1;
+		if (uport->ignore_status_mask & IGNPAR)
+			tty_insert_flip_char(tty, 0, TTY_PARITY);
+	}
+
+	if (error_f)
+		msm_hs_write(uport, UARTDM_CR_ADDR, RESET_ERROR_STATUS);
+
+	if (msm_uport->clk_req_off_state == CLK_REQ_OFF_FLUSH_ISSUED)
+		msm_uport->clk_req_off_state = CLK_REQ_OFF_RXSTALE_FLUSHED;
+
+	flush = msm_uport->rx.flush;
+	if (flush == FLUSH_IGNORE)
+		msm_hs_start_rx_locked(uport);
+	if (flush == FLUSH_STOP)
+		msm_uport->rx.flush = FLUSH_SHUTDOWN;
+	if (flush >= FLUSH_DATA_INVALID)
+		goto out;
+
+	rx_count = msm_hs_read(uport, UARTDM_RX_TOTAL_SNAP_ADDR);
+
+	if (0 != (uport->read_status_mask & CREAD)) {
+		retval = tty_insert_flip_string(tty, msm_uport->rx.buffer,
+						rx_count);
+		BUG_ON(retval != rx_count);
+	}
+
+	msm_hs_start_rx_locked(uport);
+
+out:
+	clk_disable(msm_uport->clk);
+
+	spin_unlock_irqrestore(&uport->lock, flags);
+
+	if (flush < FLUSH_DATA_INVALID)
+		queue_work(msm_hs_workqueue, &msm_uport->rx.tty_work);
+}
+
+static void msm_hs_tty_flip_buffer_work(struct work_struct *work)
+{
+	struct msm_hs_port *msm_uport =
+			container_of(work, struct msm_hs_port, rx.tty_work);
+	struct tty_struct *tty = msm_uport->uport.state->port.tty;
+
+	tty_flip_buffer_push(tty);
+}
+
+/*
+ *  Standard API, Current states of modem control inputs
+ *
+ * Since CTS can be handled entirely by HARDWARE we always
+ * indicate clear to send and count on the TX FIFO to block when
+ * it fills up.
+ *
+ * - TIOCM_DCD
+ * - TIOCM_CTS
+ * - TIOCM_DSR
+ * - TIOCM_RI
+ *  (Unsupported) DCD and DSR will return them high. RI will return low.
+ */
+static unsigned int msm_hs_get_mctrl_locked(struct uart_port *uport)
+{
+	return TIOCM_DSR | TIOCM_CAR | TIOCM_CTS;
+}
+
+/*
+ * True enables UART auto RFR, which indicates we are ready for data if the RX
+ * buffer is not full. False disables auto RFR, and deasserts RFR to indicate
+ * we are not ready for data. Must be called with UART clock on.
+ */
+static void set_rfr_locked(struct uart_port *uport, int auto_rfr)
+{
+	unsigned int data;
+
+	data = msm_hs_read(uport, UARTDM_MR1_ADDR);
+
+	if (auto_rfr) {
+		/* enable auto ready-for-receiving */
+		data |= UARTDM_MR1_RX_RDY_CTL_BMSK;
+		msm_hs_write(uport, UARTDM_MR1_ADDR, data);
+	} else {
+		/* disable auto ready-for-receiving */
+		data &= ~UARTDM_MR1_RX_RDY_CTL_BMSK;
+		msm_hs_write(uport, UARTDM_MR1_ADDR, data);
+		/* RFR is active low, set high */
+		msm_hs_write(uport, UARTDM_CR_ADDR, RFR_HIGH);
+	}
+}
+
+/*
+ *  Standard API, used to set or clear RFR
+ */
+static void msm_hs_set_mctrl_locked(struct uart_port *uport,
+				    unsigned int mctrl)
+{
+	unsigned int auto_rfr;
+	struct msm_hs_port *msm_uport = UARTDM_TO_MSM(uport);
+
+	clk_enable(msm_uport->clk);
+
+	auto_rfr = TIOCM_RTS & mctrl ? 1 : 0;
+	set_rfr_locked(uport, auto_rfr);
+
+	clk_disable(msm_uport->clk);
+}
+
+/* Standard API, Enable modem status (CTS) interrupt  */
+static void msm_hs_enable_ms_locked(struct uart_port *uport)
+{
+	struct msm_hs_port *msm_uport = UARTDM_TO_MSM(uport);
+
+	clk_enable(msm_uport->clk);
+
+	/* Enable DELTA_CTS Interrupt */
+	msm_uport->imr_reg |= UARTDM_ISR_DELTA_CTS_BMSK;
+	msm_hs_write(uport, UARTDM_IMR_ADDR, msm_uport->imr_reg);
+
+	clk_disable(msm_uport->clk);
+
+}
+
+/*
+ *  Standard API, Break Signal
+ *
+ * Control the transmission of a break signal. ctl eq 0 => break
+ * signal terminate ctl ne 0 => start break signal
+ */
+static void msm_hs_break_ctl(struct uart_port *uport, int ctl)
+{
+	struct msm_hs_port *msm_uport = UARTDM_TO_MSM(uport);
+
+	clk_enable(msm_uport->clk);
+	msm_hs_write(uport, UARTDM_CR_ADDR, ctl ? START_BREAK : STOP_BREAK);
+	clk_disable(msm_uport->clk);
+}
+
+static void msm_hs_config_port(struct uart_port *uport, int cfg_flags)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&uport->lock, flags);
+	if (cfg_flags & UART_CONFIG_TYPE) {
+		uport->type = PORT_MSM;
+		msm_hs_request_port(uport);
+	}
+	spin_unlock_irqrestore(&uport->lock, flags);
+}
+
+/*  Handle CTS changes (Called from interrupt handler) */
+static void msm_hs_handle_delta_cts(struct uart_port *uport)
+{
+	unsigned long flags;
+	struct msm_hs_port *msm_uport = UARTDM_TO_MSM(uport);
+
+	spin_lock_irqsave(&uport->lock, flags);
+	clk_enable(msm_uport->clk);
+
+	/* clear interrupt */
+	msm_hs_write(uport, UARTDM_CR_ADDR, RESET_CTS);
+	uport->icount.cts++;
+
+	clk_disable(msm_uport->clk);
+	spin_unlock_irqrestore(&uport->lock, flags);
+
+	/* clear the IOCTL TIOCMIWAIT if called */
+	wake_up_interruptible(&uport->state->port.delta_msr_wait);
+}
+
+/* check if the TX path is flushed, and if so clock off
+ * returns 0 did not clock off, need to retry (still sending final byte)
+ *        -1 did not clock off, do not retry
+ *         1 if we clocked off
+ */
+static int msm_hs_check_clock_off_locked(struct uart_port *uport)
+{
+	unsigned long sr_status;
+	struct msm_hs_port *msm_uport = UARTDM_TO_MSM(uport);
+	struct circ_buf *tx_buf = &uport->state->xmit;
+
+	/* Cancel if tx tty buffer is not empty, dma is in flight,
+	 * or tx fifo is not empty, or rx fifo is not empty */
+	if (msm_uport->clk_state != MSM_HS_CLK_REQUEST_OFF ||
+	    !uart_circ_empty(tx_buf) || msm_uport->tx.dma_in_flight ||
+	    (msm_uport->imr_reg & UARTDM_ISR_TXLEV_BMSK) ||
+	    !(msm_uport->imr_reg & UARTDM_ISR_RXLEV_BMSK))  {
+		return -1;
+	}
+
+	/* Make sure the uart is finished with the last byte */
+	sr_status = msm_hs_read(uport, UARTDM_SR_ADDR);
+	if (!(sr_status & UARTDM_SR_TXEMT_BMSK))
+		return 0;  /* retry */
+
+	/* Make sure forced RXSTALE flush complete */
+	switch (msm_uport->clk_req_off_state) {
+	case CLK_REQ_OFF_START:
+		msm_uport->clk_req_off_state = CLK_REQ_OFF_RXSTALE_ISSUED;
+		msm_hs_write(uport, UARTDM_CR_ADDR, FORCE_STALE_EVENT);
+		return 0;  /* RXSTALE flush not complete - retry */
+	case CLK_REQ_OFF_RXSTALE_ISSUED:
+	case CLK_REQ_OFF_FLUSH_ISSUED:
+		return 0;  /* RXSTALE flush not complete - retry */
+	case CLK_REQ_OFF_RXSTALE_FLUSHED:
+		break;  /* continue */
+	}
+
+	if (msm_uport->rx.flush != FLUSH_SHUTDOWN) {
+		if (msm_uport->rx.flush == FLUSH_NONE)
+			msm_hs_stop_rx_locked(uport);
+		return 0;  /* come back later to really clock off */
+	}
+
+	/* we really want to clock off */
+	clk_disable(msm_uport->clk);
+	msm_uport->clk_state = MSM_HS_CLK_OFF;
+
+	if (use_low_power_rx_wakeup(msm_uport)) {
+		msm_uport->rx_wakeup.ignore = 1;
+		enable_irq(msm_uport->rx_wakeup.irq);
+	}
+	return 1;
+}
+
+static enum hrtimer_restart msm_hs_clk_off_retry(struct hrtimer *timer)
+{
+	unsigned long flags;
+	int ret = HRTIMER_NORESTART;
+	struct msm_hs_port *msm_uport = container_of(timer, struct msm_hs_port,
+						     clk_off_timer);
+	struct uart_port *uport = &msm_uport->uport;
+
+	spin_lock_irqsave(&uport->lock, flags);
+
+	if (!msm_hs_check_clock_off_locked(uport)) {
+		hrtimer_forward_now(timer, msm_uport->clk_off_delay);
+		ret = HRTIMER_RESTART;
+	}
+
+	spin_unlock_irqrestore(&uport->lock, flags);
+
+	return ret;
+}
+
+static irqreturn_t msm_hs_isr(int irq, void *dev)
+{
+	unsigned long flags;
+	unsigned long isr_status;
+	struct msm_hs_port *msm_uport = dev;
+	struct uart_port *uport = &msm_uport->uport;
+	struct circ_buf *tx_buf = &uport->state->xmit;
+	struct msm_hs_tx *tx = &msm_uport->tx;
+	struct msm_hs_rx *rx = &msm_uport->rx;
+
+	spin_lock_irqsave(&uport->lock, flags);
+
+	isr_status = msm_hs_read(uport, UARTDM_MISR_ADDR);
+
+	/* Uart RX starting */
+	if (isr_status & UARTDM_ISR_RXLEV_BMSK) {
+		msm_uport->imr_reg &= ~UARTDM_ISR_RXLEV_BMSK;
+		msm_hs_write(uport, UARTDM_IMR_ADDR, msm_uport->imr_reg);
+	}
+	/* Stale rx interrupt */
+	if (isr_status & UARTDM_ISR_RXSTALE_BMSK) {
+		msm_hs_write(uport, UARTDM_CR_ADDR, STALE_EVENT_DISABLE);
+		msm_hs_write(uport, UARTDM_CR_ADDR, RESET_STALE_INT);
+
+		if (msm_uport->clk_req_off_state == CLK_REQ_OFF_RXSTALE_ISSUED)
+			msm_uport->clk_req_off_state =
+					CLK_REQ_OFF_FLUSH_ISSUED;
+		if (rx->flush == FLUSH_NONE) {
+			rx->flush = FLUSH_DATA_READY;
+			msm_dmov_stop_cmd(msm_uport->dma_rx_channel, NULL, 1);
+		}
+	}
+	/* tx ready interrupt */
+	if (isr_status & UARTDM_ISR_TX_READY_BMSK) {
+		/* Clear  TX Ready */
+		msm_hs_write(uport, UARTDM_CR_ADDR, CLEAR_TX_READY);
+
+		if (msm_uport->clk_state == MSM_HS_CLK_REQUEST_OFF) {
+			msm_uport->imr_reg |= UARTDM_ISR_TXLEV_BMSK;
+			msm_hs_write(uport, UARTDM_IMR_ADDR,
+				     msm_uport->imr_reg);
+		}
+
+		/* Complete DMA TX transactions and submit new transactions */
+		tx_buf->tail = (tx_buf->tail + tx->tx_count) & ~UART_XMIT_SIZE;
+
+		tx->dma_in_flight = 0;
+
+		uport->icount.tx += tx->tx_count;
+		if (tx->tx_ready_int_en)
+			msm_hs_submit_tx_locked(uport);
+
+		if (uart_circ_chars_pending(tx_buf) < WAKEUP_CHARS)
+			uart_write_wakeup(uport);
+	}
+	if (isr_status & UARTDM_ISR_TXLEV_BMSK) {
+		/* TX FIFO is empty */
+		msm_uport->imr_reg &= ~UARTDM_ISR_TXLEV_BMSK;
+		msm_hs_write(uport, UARTDM_IMR_ADDR, msm_uport->imr_reg);
+		if (!msm_hs_check_clock_off_locked(uport))
+			hrtimer_start(&msm_uport->clk_off_timer,
+				      msm_uport->clk_off_delay,
+				      HRTIMER_MODE_REL);
+	}
+
+	/* Change in CTS interrupt */
+	if (isr_status & UARTDM_ISR_DELTA_CTS_BMSK)
+		msm_hs_handle_delta_cts(uport);
+
+	spin_unlock_irqrestore(&uport->lock, flags);
+
+	return IRQ_HANDLED;
+}
+
+void msm_hs_request_clock_off_locked(struct uart_port *uport)
+{
+	struct msm_hs_port *msm_uport = UARTDM_TO_MSM(uport);
+
+	if (msm_uport->clk_state == MSM_HS_CLK_ON) {
+		msm_uport->clk_state = MSM_HS_CLK_REQUEST_OFF;
+		msm_uport->clk_req_off_state = CLK_REQ_OFF_START;
+		if (!use_low_power_rx_wakeup(msm_uport))
+			set_rfr_locked(uport, 0);
+		msm_uport->imr_reg |= UARTDM_ISR_TXLEV_BMSK;
+		msm_hs_write(uport, UARTDM_IMR_ADDR, msm_uport->imr_reg);
+	}
+}
+
+/**
+ * msm_hs_request_clock_off - request to (i.e. asynchronously) turn off uart
+ * clock once pending TX is flushed and Rx DMA command is terminated.
+ * @uport: uart_port structure for the device instance.
+ *
+ * This functions puts the device into a partially active low power mode. It
+ * waits to complete all pending tx transactions, flushes ongoing Rx DMA
+ * command and terminates UART side Rx transaction, puts UART HW in non DMA
+ * mode and then clocks off the device. A client calls this when no UART
+ * data is expected. msm_request_clock_on() must be called before any further
+ * UART can be sent or received.
+ */
+void msm_hs_request_clock_off(struct uart_port *uport)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&uport->lock, flags);
+	msm_hs_request_clock_off_locked(uport);
+	spin_unlock_irqrestore(&uport->lock, flags);
+}
+
+void msm_hs_request_clock_on_locked(struct uart_port *uport)
+{
+	struct msm_hs_port *msm_uport = UARTDM_TO_MSM(uport);
+	unsigned int data;
+
+	switch (msm_uport->clk_state) {
+	case MSM_HS_CLK_OFF:
+		clk_enable(msm_uport->clk);
+		disable_irq_nosync(msm_uport->rx_wakeup.irq);
+		/* fall-through */
+	case MSM_HS_CLK_REQUEST_OFF:
+		if (msm_uport->rx.flush == FLUSH_STOP ||
+		    msm_uport->rx.flush == FLUSH_SHUTDOWN) {
+			msm_hs_write(uport, UARTDM_CR_ADDR, RESET_RX);
+			data = msm_hs_read(uport, UARTDM_DMEN_ADDR);
+			data |= UARTDM_RX_DM_EN_BMSK;
+			msm_hs_write(uport, UARTDM_DMEN_ADDR, data);
+		}
+		hrtimer_try_to_cancel(&msm_uport->clk_off_timer);
+		if (msm_uport->rx.flush == FLUSH_SHUTDOWN)
+			msm_hs_start_rx_locked(uport);
+		if (!use_low_power_rx_wakeup(msm_uport))
+			set_rfr_locked(uport, 1);
+		if (msm_uport->rx.flush == FLUSH_STOP)
+			msm_uport->rx.flush = FLUSH_IGNORE;
+		msm_uport->clk_state = MSM_HS_CLK_ON;
+		break;
+	case MSM_HS_CLK_ON:
+		break;
+	case MSM_HS_CLK_PORT_OFF:
+		break;
+	}
+}
+
+/**
+ * msm_hs_request_clock_on - Switch the device from partially active low
+ * power mode to fully active (i.e. clock on) mode.
+ * @uport: uart_port structure for the device.
+ *
+ * This function switches on the input clock, puts UART HW into DMA mode
+ * and enqueues an Rx DMA command if the device was in partially active
+ * mode. It has no effect if called with the device in inactive state.
+ */
+void msm_hs_request_clock_on(struct uart_port *uport)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&uport->lock, flags);
+	msm_hs_request_clock_on_locked(uport);
+	spin_unlock_irqrestore(&uport->lock, flags);
+}
+
+static irqreturn_t msm_hs_rx_wakeup_isr(int irq, void *dev)
+{
+	unsigned int wakeup = 0;
+	unsigned long flags;
+	struct msm_hs_port *msm_uport = dev;
+	struct uart_port *uport = &msm_uport->uport;
+	struct tty_struct *tty = NULL;
+
+	spin_lock_irqsave(&uport->lock, flags);
+	if (msm_uport->clk_state == MSM_HS_CLK_OFF) {
+		/* ignore the first irq - it is a pending irq that occured
+		 * before enable_irq() */
+		if (msm_uport->rx_wakeup.ignore)
+			msm_uport->rx_wakeup.ignore = 0;
+		else
+			wakeup = 1;
+	}
+
+	if (wakeup) {
+		/* the uart was clocked off during an rx, wake up and
+		 * optionally inject char into tty rx */
+		msm_hs_request_clock_on_locked(uport);
+		if (msm_uport->rx_wakeup.inject_rx) {
+			tty = uport->state->port.tty;
+			tty_insert_flip_char(tty,
+					     msm_uport->rx_wakeup.rx_to_inject,
+					     TTY_NORMAL);
+			queue_work(msm_hs_workqueue, &msm_uport->rx.tty_work);
+		}
+	}
+
+	spin_unlock_irqrestore(&uport->lock, flags);
+
+	return IRQ_HANDLED;
+}
+
+static const char *msm_hs_type(struct uart_port *port)
+{
+	return (port->type == PORT_MSM) ? "MSM_HS_UART" : NULL;
+}
+
+/* Called when port is opened */
+static int msm_hs_startup(struct uart_port *uport)
+{
+	int ret;
+	int rfr_level;
+	unsigned long flags;
+	unsigned int data;
+	struct msm_hs_port *msm_uport = UARTDM_TO_MSM(uport);
+	struct circ_buf *tx_buf = &uport->state->xmit;
+	struct msm_hs_tx *tx = &msm_uport->tx;
+	struct msm_hs_rx *rx = &msm_uport->rx;
+
+	rfr_level = uport->fifosize;
+	if (rfr_level > 16)
+		rfr_level -= 16;
+
+	tx->dma_base = dma_map_single(uport->dev, tx_buf->buf, UART_XMIT_SIZE,
+				      DMA_TO_DEVICE);
+
+	/* do not let tty layer execute RX in global workqueue, use a
+	 * dedicated workqueue managed by this driver */
+	uport->state->port.tty->low_latency = 1;
+
+	/* turn on uart clk */
+	ret = msm_hs_init_clk_locked(uport);
+	if (unlikely(ret)) {
+		printk(KERN_ERR "Turning uartclk failed!\n");
+		goto err_msm_hs_init_clk;
+	}
+
+	/* Set auto RFR Level */
+	data = msm_hs_read(uport, UARTDM_MR1_ADDR);
+	data &= ~UARTDM_MR1_AUTO_RFR_LEVEL1_BMSK;
+	data &= ~UARTDM_MR1_AUTO_RFR_LEVEL0_BMSK;
+	data |= (UARTDM_MR1_AUTO_RFR_LEVEL1_BMSK & (rfr_level << 2));
+	data |= (UARTDM_MR1_AUTO_RFR_LEVEL0_BMSK & rfr_level);
+	msm_hs_write(uport, UARTDM_MR1_ADDR, data);
+
+	/* Make sure RXSTALE count is non-zero */
+	data = msm_hs_read(uport, UARTDM_IPR_ADDR);
+	if (!data) {
+		data |= 0x1f & UARTDM_IPR_STALE_LSB_BMSK;
+		msm_hs_write(uport, UARTDM_IPR_ADDR, data);
+	}
+
+	/* Enable Data Mover Mode */
+	data = UARTDM_TX_DM_EN_BMSK | UARTDM_RX_DM_EN_BMSK;
+	msm_hs_write(uport, UARTDM_DMEN_ADDR, data);
+
+	/* Reset TX */
+	msm_hs_write(uport, UARTDM_CR_ADDR, RESET_TX);
+	msm_hs_write(uport, UARTDM_CR_ADDR, RESET_RX);
+	msm_hs_write(uport, UARTDM_CR_ADDR, RESET_ERROR_STATUS);
+	msm_hs_write(uport, UARTDM_CR_ADDR, RESET_BREAK_INT);
+	msm_hs_write(uport, UARTDM_CR_ADDR, RESET_STALE_INT);
+	msm_hs_write(uport, UARTDM_CR_ADDR, RESET_CTS);
+	msm_hs_write(uport, UARTDM_CR_ADDR, RFR_LOW);
+	/* Turn on Uart Receiver */
+	msm_hs_write(uport, UARTDM_CR_ADDR, UARTDM_CR_RX_EN_BMSK);
+
+	/* Turn on Uart Transmitter */
+	msm_hs_write(uport, UARTDM_CR_ADDR, UARTDM_CR_TX_EN_BMSK);
+
+	/* Initialize the tx */
+	tx->tx_ready_int_en = 0;
+	tx->dma_in_flight = 0;
+
+	tx->xfer.complete_func = msm_hs_dmov_tx_callback;
+	tx->xfer.execute_func = NULL;
+
+	tx->command_ptr->cmd = CMD_LC |
+	    CMD_DST_CRCI(msm_uport->dma_tx_crci) | CMD_MODE_BOX;
+
+	tx->command_ptr->src_dst_len = (MSM_UARTDM_BURST_SIZE << 16)
+					   | (MSM_UARTDM_BURST_SIZE);
+
+	tx->command_ptr->row_offset = (MSM_UARTDM_BURST_SIZE << 16);
+
+	tx->command_ptr->dst_row_addr =
+	    msm_uport->uport.mapbase + UARTDM_TF_ADDR;
+
+
+	/* Turn on Uart Receive */
+	rx->xfer.complete_func = msm_hs_dmov_rx_callback;
+	rx->xfer.execute_func = NULL;
+
+	rx->command_ptr->cmd = CMD_LC |
+	    CMD_SRC_CRCI(msm_uport->dma_rx_crci) | CMD_MODE_BOX;
+
+	rx->command_ptr->src_dst_len = (MSM_UARTDM_BURST_SIZE << 16)
+					   | (MSM_UARTDM_BURST_SIZE);
+	rx->command_ptr->row_offset =  MSM_UARTDM_BURST_SIZE;
+	rx->command_ptr->src_row_addr = uport->mapbase + UARTDM_RF_ADDR;
+
+
+	msm_uport->imr_reg |= UARTDM_ISR_RXSTALE_BMSK;
+	/* Enable reading the current CTS, no harm even if CTS is ignored */
+	msm_uport->imr_reg |= UARTDM_ISR_CURRENT_CTS_BMSK;
+
+	msm_hs_write(uport, UARTDM_TFWR_ADDR, 0);  /* TXLEV on empty TX fifo */
+
+
+	ret = request_irq(uport->irq, msm_hs_isr, IRQF_TRIGGER_HIGH,
+			  "msm_hs_uart", msm_uport);
+	if (unlikely(ret)) {
+		printk(KERN_ERR "Request msm_hs_uart IRQ failed!\n");
+		goto err_request_irq;
+	}
+	if (use_low_power_rx_wakeup(msm_uport)) {
+		ret = request_irq(msm_uport->rx_wakeup.irq,
+				  msm_hs_rx_wakeup_isr,
+				  IRQF_TRIGGER_FALLING,
+				  "msm_hs_rx_wakeup", msm_uport);
+		if (unlikely(ret)) {
+			printk(KERN_ERR "Request msm_hs_rx_wakeup IRQ failed!\n");
+			free_irq(uport->irq, msm_uport);
+			goto err_request_irq;
+		}
+		disable_irq(msm_uport->rx_wakeup.irq);
+	}
+
+	spin_lock_irqsave(&uport->lock, flags);
+
+	msm_hs_write(uport, UARTDM_RFWR_ADDR, 0);
+	msm_hs_start_rx_locked(uport);
+
+	spin_unlock_irqrestore(&uport->lock, flags);
+	ret = pm_runtime_set_active(uport->dev);
+	if (ret)
+		dev_err(uport->dev, "set active error:%d\n", ret);
+	pm_runtime_enable(uport->dev);
+
+	return 0;
+
+err_request_irq:
+err_msm_hs_init_clk:
+	dma_unmap_single(uport->dev, tx->dma_base,
+				UART_XMIT_SIZE, DMA_TO_DEVICE);
+	return ret;
+}
+
+/* Initialize tx and rx data structures */
+static int __devinit uartdm_init_port(struct uart_port *uport)
+{
+	int ret = 0;
+	struct msm_hs_port *msm_uport = UARTDM_TO_MSM(uport);
+	struct msm_hs_tx *tx = &msm_uport->tx;
+	struct msm_hs_rx *rx = &msm_uport->rx;
+
+	/* Allocate the command pointer. Needs to be 64 bit aligned */
+	tx->command_ptr = kmalloc(sizeof(dmov_box), GFP_KERNEL | __GFP_DMA);
+	if (!tx->command_ptr)
+		return -ENOMEM;
+
+	tx->command_ptr_ptr = kmalloc(sizeof(u32 *), GFP_KERNEL | __GFP_DMA);
+	if (!tx->command_ptr_ptr) {
+		ret = -ENOMEM;
+		goto err_tx_command_ptr_ptr;
+	}
+
+	tx->mapped_cmd_ptr = dma_map_single(uport->dev, tx->command_ptr,
+					    sizeof(dmov_box), DMA_TO_DEVICE);
+	tx->mapped_cmd_ptr_ptr = dma_map_single(uport->dev,
+						tx->command_ptr_ptr,
+						sizeof(u32 *), DMA_TO_DEVICE);
+	tx->xfer.cmdptr = DMOV_CMD_ADDR(tx->mapped_cmd_ptr_ptr);
+
+	init_waitqueue_head(&rx->wait);
+
+	rx->pool = dma_pool_create("rx_buffer_pool", uport->dev,
+				   UARTDM_RX_BUF_SIZE, 16, 0);
+	if (!rx->pool) {
+		pr_err("%s(): cannot allocate rx_buffer_pool", __func__);
+		ret = -ENOMEM;
+		goto err_dma_pool_create;
+	}
+
+	rx->buffer = dma_pool_alloc(rx->pool, GFP_KERNEL, &rx->rbuffer);
+	if (!rx->buffer) {
+		pr_err("%s(): cannot allocate rx->buffer", __func__);
+		ret = -ENOMEM;
+		goto err_dma_pool_alloc;
+	}
+
+	/* Allocate the command pointer. Needs to be 64 bit aligned */
+	rx->command_ptr = kmalloc(sizeof(dmov_box), GFP_KERNEL | __GFP_DMA);
+	if (!rx->command_ptr) {
+		pr_err("%s(): cannot allocate rx->command_ptr", __func__);
+		ret = -ENOMEM;
+		goto err_rx_command_ptr;
+	}
+
+	rx->command_ptr_ptr = kmalloc(sizeof(u32 *), GFP_KERNEL | __GFP_DMA);
+	if (!rx->command_ptr_ptr) {
+		pr_err("%s(): cannot allocate rx->command_ptr_ptr", __func__);
+		ret = -ENOMEM;
+		goto err_rx_command_ptr_ptr;
+	}
+
+	rx->command_ptr->num_rows = ((UARTDM_RX_BUF_SIZE >> 4) << 16) |
+					 (UARTDM_RX_BUF_SIZE >> 4);
+
+	rx->command_ptr->dst_row_addr = rx->rbuffer;
+
+	rx->mapped_cmd_ptr = dma_map_single(uport->dev, rx->command_ptr,
+					    sizeof(dmov_box), DMA_TO_DEVICE);
+
+	*rx->command_ptr_ptr = CMD_PTR_LP | DMOV_CMD_ADDR(rx->mapped_cmd_ptr);
+
+	rx->cmdptr_dmaaddr = dma_map_single(uport->dev, rx->command_ptr_ptr,
+					    sizeof(u32 *), DMA_TO_DEVICE);
+	rx->xfer.cmdptr = DMOV_CMD_ADDR(rx->cmdptr_dmaaddr);
+
+	INIT_WORK(&rx->tty_work, msm_hs_tty_flip_buffer_work);
+
+	return ret;
+
+err_rx_command_ptr_ptr:
+	kfree(rx->command_ptr);
+err_rx_command_ptr:
+	dma_pool_free(msm_uport->rx.pool, msm_uport->rx.buffer,
+						msm_uport->rx.rbuffer);
+err_dma_pool_alloc:
+	dma_pool_destroy(msm_uport->rx.pool);
+err_dma_pool_create:
+	dma_unmap_single(uport->dev, msm_uport->tx.mapped_cmd_ptr_ptr,
+				sizeof(u32 *), DMA_TO_DEVICE);
+	dma_unmap_single(uport->dev, msm_uport->tx.mapped_cmd_ptr,
+				sizeof(dmov_box), DMA_TO_DEVICE);
+	kfree(msm_uport->tx.command_ptr_ptr);
+err_tx_command_ptr_ptr:
+	kfree(msm_uport->tx.command_ptr);
+	return ret;
+}
+
+static int __devinit msm_hs_probe(struct platform_device *pdev)
+{
+	int ret;
+	struct uart_port *uport;
+	struct msm_hs_port *msm_uport;
+	struct resource *resource;
+	const struct msm_serial_hs_platform_data *pdata =
+						pdev->dev.platform_data;
+
+	if (pdev->id < 0 || pdev->id >= UARTDM_NR) {
+		printk(KERN_ERR "Invalid plaform device ID = %d\n", pdev->id);
+		return -EINVAL;
+	}
+
+	msm_uport = &q_uart_port[pdev->id];
+	uport = &msm_uport->uport;
+
+	uport->dev = &pdev->dev;
+
+	resource = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (unlikely(!resource))
+		return -ENXIO;
+
+	uport->mapbase = resource->start;
+	uport->irq = platform_get_irq(pdev, 0);
+	if (unlikely(uport->irq < 0))
+		return -ENXIO;
+
+	if (unlikely(set_irq_wake(uport->irq, 1)))
+		return -ENXIO;
+
+	if (pdata == NULL || pdata->rx_wakeup_irq < 0)
+		msm_uport->rx_wakeup.irq = -1;
+	else {
+		msm_uport->rx_wakeup.irq = pdata->rx_wakeup_irq;
+		msm_uport->rx_wakeup.ignore = 1;
+		msm_uport->rx_wakeup.inject_rx = pdata->inject_rx_on_wakeup;
+		msm_uport->rx_wakeup.rx_to_inject = pdata->rx_to_inject;
+
+		if (unlikely(msm_uport->rx_wakeup.irq < 0))
+			return -ENXIO;
+
+		if (unlikely(set_irq_wake(msm_uport->rx_wakeup.irq, 1)))
+			return -ENXIO;
+	}
+
+	if (pdata == NULL)
+		msm_uport->exit_lpm_cb = NULL;
+	else
+		msm_uport->exit_lpm_cb = pdata->exit_lpm_cb;
+
+	resource = platform_get_resource_byname(pdev, IORESOURCE_DMA,
+						"uartdm_channels");
+	if (unlikely(!resource))
+		return -ENXIO;
+
+	msm_uport->dma_tx_channel = resource->start;
+	msm_uport->dma_rx_channel = resource->end;
+
+	resource = platform_get_resource_byname(pdev, IORESOURCE_DMA,
+						"uartdm_crci");
+	if (unlikely(!resource))
+		return -ENXIO;
+
+	msm_uport->dma_tx_crci = resource->start;
+	msm_uport->dma_rx_crci = resource->end;
+
+	uport->iotype = UPIO_MEM;
+	uport->fifosize = UART_FIFOSIZE;
+	uport->ops = &msm_hs_ops;
+	uport->flags = UPF_BOOT_AUTOCONF;
+	uport->uartclk = UARTCLK;
+	msm_uport->imr_reg = 0x0;
+	msm_uport->clk = clk_get(&pdev->dev, "uartdm_clk");
+	if (IS_ERR(msm_uport->clk))
+		return PTR_ERR(msm_uport->clk);
+
+	ret = uartdm_init_port(uport);
+	if (unlikely(ret))
+		return ret;
+
+	msm_uport->clk_state = MSM_HS_CLK_PORT_OFF;
+	hrtimer_init(&msm_uport->clk_off_timer, CLOCK_MONOTONIC,
+		     HRTIMER_MODE_REL);
+	msm_uport->clk_off_timer.function = msm_hs_clk_off_retry;
+	msm_uport->clk_off_delay = ktime_set(0, 1000000);  /* 1ms */
+
+	uport->line = pdev->id;
+	return uart_add_one_port(&msm_hs_driver, uport);
+}
+
+static int __init msm_serial_hs_init(void)
+{
+	int ret, i;
+
+	/* Init all UARTS as non-configured */
+	for (i = 0; i < UARTDM_NR; i++)
+		q_uart_port[i].uport.type = PORT_UNKNOWN;
+
+	msm_hs_workqueue = create_singlethread_workqueue("msm_serial_hs");
+	if (unlikely(!msm_hs_workqueue))
+		return -ENOMEM;
+
+	ret = uart_register_driver(&msm_hs_driver);
+	if (unlikely(ret)) {
+		printk(KERN_ERR "%s failed to load\n", __func__);
+		goto err_uart_register_driver;
+	}
+
+	ret = platform_driver_register(&msm_serial_hs_platform_driver);
+	if (ret) {
+		printk(KERN_ERR "%s failed to load\n", __func__);
+		goto err_platform_driver_register;
+	}
+
+	return ret;
+
+err_platform_driver_register:
+	uart_unregister_driver(&msm_hs_driver);
+err_uart_register_driver:
+	destroy_workqueue(msm_hs_workqueue);
+	return ret;
+}
+module_init(msm_serial_hs_init);
+
+/*
+ *  Called by the upper layer when port is closed.
+ *     - Disables the port
+ *     - Unhook the ISR
+ */
+static void msm_hs_shutdown(struct uart_port *uport)
+{
+	unsigned long flags;
+	struct msm_hs_port *msm_uport = UARTDM_TO_MSM(uport);
+
+	BUG_ON(msm_uport->rx.flush < FLUSH_STOP);
+
+	spin_lock_irqsave(&uport->lock, flags);
+	clk_enable(msm_uport->clk);
+
+	/* Disable the transmitter */
+	msm_hs_write(uport, UARTDM_CR_ADDR, UARTDM_CR_TX_DISABLE_BMSK);
+	/* Disable the receiver */
+	msm_hs_write(uport, UARTDM_CR_ADDR, UARTDM_CR_RX_DISABLE_BMSK);
+
+	pm_runtime_disable(uport->dev);
+	pm_runtime_set_suspended(uport->dev);
+
+	/* Free the interrupt */
+	free_irq(uport->irq, msm_uport);
+	if (use_low_power_rx_wakeup(msm_uport))
+		free_irq(msm_uport->rx_wakeup.irq, msm_uport);
+
+	msm_uport->imr_reg = 0;
+	msm_hs_write(uport, UARTDM_IMR_ADDR, msm_uport->imr_reg);
+
+	wait_event(msm_uport->rx.wait, msm_uport->rx.flush == FLUSH_SHUTDOWN);
+
+	clk_disable(msm_uport->clk);  /* to balance local clk_enable() */
+	if (msm_uport->clk_state != MSM_HS_CLK_OFF)
+		clk_disable(msm_uport->clk);  /* to balance clk_state */
+	msm_uport->clk_state = MSM_HS_CLK_PORT_OFF;
+
+	dma_unmap_single(uport->dev, msm_uport->tx.dma_base,
+			 UART_XMIT_SIZE, DMA_TO_DEVICE);
+
+	spin_unlock_irqrestore(&uport->lock, flags);
+
+	if (cancel_work_sync(&msm_uport->rx.tty_work))
+		msm_hs_tty_flip_buffer_work(&msm_uport->rx.tty_work);
+}
+
+static void __exit msm_serial_hs_exit(void)
+{
+	flush_workqueue(msm_hs_workqueue);
+	destroy_workqueue(msm_hs_workqueue);
+	platform_driver_unregister(&msm_serial_hs_platform_driver);
+	uart_unregister_driver(&msm_hs_driver);
+}
+module_exit(msm_serial_hs_exit);
+
+#ifdef CONFIG_PM_RUNTIME
+static int msm_hs_runtime_idle(struct device *dev)
+{
+	/*
+	 * returning success from idle results in runtime suspend to be
+	 * called
+	 */
+	return 0;
+}
+
+static int msm_hs_runtime_resume(struct device *dev)
+{
+	struct platform_device *pdev = container_of(dev, struct
+						    platform_device, dev);
+	struct msm_hs_port *msm_uport = &q_uart_port[pdev->id];
+
+	msm_hs_request_clock_on(&msm_uport->uport);
+	return 0;
+}
+
+static int msm_hs_runtime_suspend(struct device *dev)
+{
+	struct platform_device *pdev = container_of(dev, struct
+						    platform_device, dev);
+	struct msm_hs_port *msm_uport = &q_uart_port[pdev->id];
+
+	msm_hs_request_clock_off(&msm_uport->uport);
+	return 0;
+}
+#else
+#define msm_hs_runtime_idle NULL
+#define msm_hs_runtime_resume NULL
+#define msm_hs_runtime_suspend NULL
+#endif
+
+static const struct dev_pm_ops msm_hs_dev_pm_ops = {
+	.runtime_suspend = msm_hs_runtime_suspend,
+	.runtime_resume  = msm_hs_runtime_resume,
+	.runtime_idle    = msm_hs_runtime_idle,
+};
+
+static struct platform_driver msm_serial_hs_platform_driver = {
+	.probe = msm_hs_probe,
+	.remove = __devexit_p(msm_hs_remove),
+	.driver = {
+		.name = "msm_serial_hs",
+		.owner = THIS_MODULE,
+		.pm   = &msm_hs_dev_pm_ops,
+	},
+};
+
+static struct uart_driver msm_hs_driver = {
+	.owner = THIS_MODULE,
+	.driver_name = "msm_serial_hs",
+	.dev_name = "ttyHS",
+	.nr = UARTDM_NR,
+	.cons = 0,
+};
+
+static struct uart_ops msm_hs_ops = {
+	.tx_empty = msm_hs_tx_empty,
+	.set_mctrl = msm_hs_set_mctrl_locked,
+	.get_mctrl = msm_hs_get_mctrl_locked,
+	.stop_tx = msm_hs_stop_tx_locked,
+	.start_tx = msm_hs_start_tx_locked,
+	.stop_rx = msm_hs_stop_rx_locked,
+	.enable_ms = msm_hs_enable_ms_locked,
+	.break_ctl = msm_hs_break_ctl,
+	.startup = msm_hs_startup,
+	.shutdown = msm_hs_shutdown,
+	.set_termios = msm_hs_set_termios,
+	.pm = msm_hs_pm,
+	.type = msm_hs_type,
+	.config_port = msm_hs_config_port,
+	.release_port = msm_hs_release_port,
+	.request_port = msm_hs_request_port,
+};
+
+MODULE_DESCRIPTION("High Speed UART Driver for the MSM chipset");
+MODULE_VERSION("1.2");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/tty/serial/msm_smd_tty.c b/drivers/tty/serial/msm_smd_tty.c
new file mode 100644
index 000000000000..beeff1e86093
--- /dev/null
+++ b/drivers/tty/serial/msm_smd_tty.c
@@ -0,0 +1,236 @@
+/* drivers/tty/serial/msm_smd_tty.c
+ *
+ * Copyright (C) 2007 Google, Inc.
+ * Copyright (c) 2011, Code Aurora Forum. All rights reserved.
+ * Author: Brian Swetland <swetland@google.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/fs.h>
+#include <linux/cdev.h>
+#include <linux/device.h>
+#include <linux/wait.h>
+
+#include <linux/tty.h>
+#include <linux/tty_driver.h>
+#include <linux/tty_flip.h>
+
+#include <mach/msm_smd.h>
+
+#define MAX_SMD_TTYS 32
+
+struct smd_tty_info {
+	struct tty_port port;
+	smd_channel_t *ch;
+};
+
+struct smd_tty_channel_desc {
+	int id;
+	const char *name;
+};
+
+static struct smd_tty_info smd_tty[MAX_SMD_TTYS];
+
+static const struct smd_tty_channel_desc smd_default_tty_channels[] = {
+	{ .id = 0, .name = "SMD_DS" },
+	{ .id = 27, .name = "SMD_GPSNMEA" },
+};
+
+static const struct smd_tty_channel_desc *smd_tty_channels =
+		smd_default_tty_channels;
+static int smd_tty_channels_len = ARRAY_SIZE(smd_default_tty_channels);
+
+static void smd_tty_notify(void *priv, unsigned event)
+{
+	unsigned char *ptr;
+	int avail;
+	struct smd_tty_info *info = priv;
+	struct tty_struct *tty;
+
+	if (event != SMD_EVENT_DATA)
+		return;
+
+	tty = tty_port_tty_get(&info->port);
+	if (!tty)
+		return;
+
+	for (;;) {
+		if (test_bit(TTY_THROTTLED, &tty->flags))
+			break;
+		avail = smd_read_avail(info->ch);
+		if (avail == 0)
+			break;
+
+		avail = tty_prepare_flip_string(tty, &ptr, avail);
+
+		if (smd_read(info->ch, ptr, avail) != avail) {
+			/* shouldn't be possible since we're in interrupt
+			** context here and nobody else could 'steal' our
+			** characters.
+			*/
+			pr_err("OOPS - smd_tty_buffer mismatch?!");
+		}
+
+		tty_flip_buffer_push(tty);
+	}
+
+	/* XXX only when writable and necessary */
+	tty_wakeup(tty);
+	tty_kref_put(tty);
+}
+
+static int smd_tty_port_activate(struct tty_port *tport, struct tty_struct *tty)
+{
+	int i, res = 0;
+	int n = tty->index;
+	const char *name = NULL;
+	struct smd_tty_info *info = smd_tty + n;
+
+	for (i = 0; i < smd_tty_channels_len; i++) {
+		if (smd_tty_channels[i].id == n) {
+			name = smd_tty_channels[i].name;
+			break;
+		}
+	}
+	if (!name)
+		return -ENODEV;
+
+	if (info->ch)
+		smd_kick(info->ch);
+	else
+		res = smd_open(name, &info->ch, info, smd_tty_notify);
+
+	if (!res)
+		tty->driver_data = info;
+
+	return res;
+}
+
+static void smd_tty_port_shutdown(struct tty_port *tport)
+{
+	struct smd_tty_info *info;
+	struct tty_struct *tty = tty_port_tty_get(tport);
+
+	info = tty->driver_data;
+	if (info->ch) {
+		smd_close(info->ch);
+		info->ch = 0;
+	}
+
+	tty->driver_data = 0;
+	tty_kref_put(tty);
+}
+
+static int smd_tty_open(struct tty_struct *tty, struct file *f)
+{
+	struct smd_tty_info *info = smd_tty + tty->index;
+
+	return tty_port_open(&info->port, tty, f);
+}
+
+static void smd_tty_close(struct tty_struct *tty, struct file *f)
+{
+	struct smd_tty_info *info = tty->driver_data;
+
+	tty_port_close(&info->port, tty, f);
+}
+
+static int smd_tty_write(struct tty_struct *tty,
+			 const unsigned char *buf, int len)
+{
+	struct smd_tty_info *info = tty->driver_data;
+	int avail;
+
+	/* if we're writing to a packet channel we will
+	** never be able to write more data than there
+	** is currently space for
+	*/
+	avail = smd_write_avail(info->ch);
+	if (len > avail)
+		len = avail;
+
+	return smd_write(info->ch, buf, len);
+}
+
+static int smd_tty_write_room(struct tty_struct *tty)
+{
+	struct smd_tty_info *info = tty->driver_data;
+	return smd_write_avail(info->ch);
+}
+
+static int smd_tty_chars_in_buffer(struct tty_struct *tty)
+{
+	struct smd_tty_info *info = tty->driver_data;
+	return smd_read_avail(info->ch);
+}
+
+static void smd_tty_unthrottle(struct tty_struct *tty)
+{
+	struct smd_tty_info *info = tty->driver_data;
+	smd_kick(info->ch);
+}
+
+static const struct tty_port_operations smd_tty_port_ops = {
+	.shutdown = smd_tty_port_shutdown,
+	.activate = smd_tty_port_activate,
+};
+
+static const struct tty_operations smd_tty_ops = {
+	.open = smd_tty_open,
+	.close = smd_tty_close,
+	.write = smd_tty_write,
+	.write_room = smd_tty_write_room,
+	.chars_in_buffer = smd_tty_chars_in_buffer,
+	.unthrottle = smd_tty_unthrottle,
+};
+
+static struct tty_driver *smd_tty_driver;
+
+static int __init smd_tty_init(void)
+{
+	int ret, i;
+
+	smd_tty_driver = alloc_tty_driver(MAX_SMD_TTYS);
+	if (smd_tty_driver == 0)
+		return -ENOMEM;
+
+	smd_tty_driver->owner = THIS_MODULE;
+	smd_tty_driver->driver_name = "smd_tty_driver";
+	smd_tty_driver->name = "smd";
+	smd_tty_driver->major = 0;
+	smd_tty_driver->minor_start = 0;
+	smd_tty_driver->type = TTY_DRIVER_TYPE_SERIAL;
+	smd_tty_driver->subtype = SERIAL_TYPE_NORMAL;
+	smd_tty_driver->init_termios = tty_std_termios;
+	smd_tty_driver->init_termios.c_iflag = 0;
+	smd_tty_driver->init_termios.c_oflag = 0;
+	smd_tty_driver->init_termios.c_cflag = B38400 | CS8 | CREAD;
+	smd_tty_driver->init_termios.c_lflag = 0;
+	smd_tty_driver->flags = TTY_DRIVER_RESET_TERMIOS |
+		TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV;
+	tty_set_operations(smd_tty_driver, &smd_tty_ops);
+
+	ret = tty_register_driver(smd_tty_driver);
+	if (ret)
+		return ret;
+
+	for (i = 0; i < smd_tty_channels_len; i++) {
+		tty_port_init(&smd_tty[smd_tty_channels[i].id].port);
+		smd_tty[smd_tty_channels[i].id].port.ops = &smd_tty_port_ops;
+		tty_register_device(smd_tty_driver, smd_tty_channels[i].id, 0);
+	}
+
+	return 0;
+}
+
+module_init(smd_tty_init);
diff --git a/drivers/tty/serial/of_serial.c b/drivers/tty/serial/of_serial.c
index 5c7abe4c94dd..6a18ca6ddaa9 100644
--- a/drivers/tty/serial/of_serial.c
+++ b/drivers/tty/serial/of_serial.c
@@ -160,17 +160,17 @@ static int of_platform_serial_remove(struct platform_device *ofdev)
  * A few common types, add more as needed.
  */
 static struct of_device_id __devinitdata of_platform_serial_table[] = {
-	{ .type = "serial", .compatible = "ns8250",   .data = (void *)PORT_8250, },
-	{ .type = "serial", .compatible = "ns16450",  .data = (void *)PORT_16450, },
-	{ .type = "serial", .compatible = "ns16550a", .data = (void *)PORT_16550A, },
-	{ .type = "serial", .compatible = "ns16550",  .data = (void *)PORT_16550, },
-	{ .type = "serial", .compatible = "ns16750",  .data = (void *)PORT_16750, },
-	{ .type = "serial", .compatible = "ns16850",  .data = (void *)PORT_16850, },
+	{ .compatible = "ns8250",   .data = (void *)PORT_8250, },
+	{ .compatible = "ns16450",  .data = (void *)PORT_16450, },
+	{ .compatible = "ns16550a", .data = (void *)PORT_16550A, },
+	{ .compatible = "ns16550",  .data = (void *)PORT_16550, },
+	{ .compatible = "ns16750",  .data = (void *)PORT_16750, },
+	{ .compatible = "ns16850",  .data = (void *)PORT_16850, },
 #ifdef CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL
-	{ .type = "serial", .compatible = "ibm,qpace-nwp-serial",
-					.data = (void *)PORT_NWPSERIAL, },
+	{ .compatible = "ibm,qpace-nwp-serial",
+		.data = (void *)PORT_NWPSERIAL, },
 #endif
-	{ .type = "serial",			      .data = (void *)PORT_UNKNOWN, },
+	{ .type = "serial",         .data = (void *)PORT_UNKNOWN, },
 	{ /* end of list */ },
 };
 
diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c
index 7f2f01058789..763537943a53 100644
--- a/drivers/tty/serial/omap-serial.c
+++ b/drivers/tty/serial/omap-serial.c
@@ -20,6 +20,10 @@
  * this driver as required for the omap-platform.
  */
 
+#if defined(CONFIG_SERIAL_OMAP_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
+#define SUPPORT_SYSRQ
+#endif
+
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/console.h>
@@ -190,7 +194,6 @@ static inline void receive_chars(struct uart_omap_port *up, int *status)
 			if (up->port.line == up->port.cons->index) {
 				/* Recover the break flag from console xmit */
 				lsr |= up->lsr_break_flag;
-				up->lsr_break_flag = 0;
 			}
 #endif
 			if (lsr & UART_LSR_BI)
@@ -517,6 +520,9 @@ static int serial_omap_startup(struct uart_port *port)
 	up->ier = UART_IER_RLSI | UART_IER_RDI;
 	serial_out(up, UART_IER, up->ier);
 
+	/* Enable module level wake up */
+	serial_out(up, UART_OMAP_WER, OMAP_UART_WER_MOD_WKUP);
+
 	up->port_activity = jiffies;
 	return 0;
 }
@@ -824,9 +830,6 @@ serial_omap_pm(struct uart_port *port, unsigned int state,
 	serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B);
 	serial_out(up, UART_EFR, efr);
 	serial_out(up, UART_LCR, 0);
-	/* Enable module level wake up */
-	serial_out(up, UART_OMAP_WER,
-		(state != 0) ? OMAP_UART_WER_MOD_WKUP : 0);
 }
 
 static void serial_omap_release_port(struct uart_port *port)
diff --git a/drivers/tty/serial/pch_uart.c b/drivers/tty/serial/pch_uart.c
index 70a61458ec42..a9ad7f33526d 100644
--- a/drivers/tty/serial/pch_uart.c
+++ b/drivers/tty/serial/pch_uart.c
@@ -21,6 +21,7 @@
 #include <linux/serial_core.h>
 #include <linux/interrupt.h>
 #include <linux/io.h>
+#include <linux/dmi.h>
 
 #include <linux/dmaengine.h>
 #include <linux/pch_dma.h>
@@ -40,10 +41,11 @@ enum {
 
 #define PCH_UART_DRIVER_DEVICE "ttyPCH"
 
-#define PCH_UART_NR_GE_256FIFO		1
-#define PCH_UART_NR_GE_64FIFO		3
-#define PCH_UART_NR_GE	(PCH_UART_NR_GE_256FIFO+PCH_UART_NR_GE_64FIFO)
-#define PCH_UART_NR	PCH_UART_NR_GE
+/* Set the max number of UART port
+ * Intel EG20T PCH: 4 port
+ * OKI SEMICONDUCTOR ML7213 IOH: 3 port
+*/
+#define PCH_UART_NR	4
 
 #define PCH_UART_HANDLED_RX_INT	(1<<((PCH_UART_HANDLED_RX_INT_SHIFT)<<1))
 #define PCH_UART_HANDLED_TX_INT	(1<<((PCH_UART_HANDLED_TX_INT_SHIFT)<<1))
@@ -192,6 +194,8 @@ enum {
 #define PCH_UART_HAL_LOOP		(PCH_UART_MCR_LOOP)
 #define PCH_UART_HAL_AFE		(PCH_UART_MCR_AFE)
 
+#define PCI_VENDOR_ID_ROHM		0x10DB
+
 struct pch_uart_buffer {
 	unsigned char *buf;
 	int size;
@@ -215,6 +219,7 @@ struct eg20t_port {
 	struct pch_uart_buffer rxbuf;
 	unsigned int dmsr;
 	unsigned int fcr;
+	unsigned int mcr;
 	unsigned int use_dma;
 	unsigned int use_dma_flag;
 	struct dma_async_tx_descriptor	*desc_tx;
@@ -223,13 +228,44 @@ struct eg20t_port {
 	struct pch_dma_slave		param_rx;
 	struct dma_chan			*chan_tx;
 	struct dma_chan			*chan_rx;
-	struct scatterlist		sg_tx;
+	struct scatterlist		*sg_tx_p;
+	int				nent;
 	struct scatterlist		sg_rx;
 	int				tx_dma_use;
 	void				*rx_buf_virt;
 	dma_addr_t			rx_buf_dma;
 };
 
+/**
+ * struct pch_uart_driver_data - private data structure for UART-DMA
+ * @port_type:			The number of DMA channel
+ * @line_no:			UART port line number (0, 1, 2...)
+ */
+struct pch_uart_driver_data {
+	int port_type;
+	int line_no;
+};
+
+enum pch_uart_num_t {
+	pch_et20t_uart0 = 0,
+	pch_et20t_uart1,
+	pch_et20t_uart2,
+	pch_et20t_uart3,
+	pch_ml7213_uart0,
+	pch_ml7213_uart1,
+	pch_ml7213_uart2,
+};
+
+static struct pch_uart_driver_data drv_dat[] = {
+	[pch_et20t_uart0] = {PCH_UART_8LINE, 0},
+	[pch_et20t_uart1] = {PCH_UART_2LINE, 1},
+	[pch_et20t_uart2] = {PCH_UART_2LINE, 2},
+	[pch_et20t_uart3] = {PCH_UART_2LINE, 3},
+	[pch_ml7213_uart0] = {PCH_UART_8LINE, 0},
+	[pch_ml7213_uart1] = {PCH_UART_2LINE, 1},
+	[pch_ml7213_uart2] = {PCH_UART_2LINE, 2},
+};
+
 static unsigned int default_baud = 9600;
 static const int trigger_level_256[4] = { 1, 64, 128, 224 };
 static const int trigger_level_64[4] = { 1, 16, 32, 56 };
@@ -278,7 +314,7 @@ static int pch_uart_hal_set_line(struct eg20t_port *priv, int baud,
 
 	div = DIV_ROUND(priv->base_baud / 16, baud);
 	if (div < 0 || USHRT_MAX <= div) {
-		pr_err("Invalid Baud(div=0x%x)\n", div);
+		dev_err(priv->port.dev, "Invalid Baud(div=0x%x)\n", div);
 		return -EINVAL;
 	}
 
@@ -286,17 +322,17 @@ static int pch_uart_hal_set_line(struct eg20t_port *priv, int baud,
 	dlm = ((unsigned int)div >> 8) & 0x00FFU;
 
 	if (parity & ~(PCH_UART_LCR_PEN | PCH_UART_LCR_EPS | PCH_UART_LCR_SP)) {
-		pr_err("Invalid parity(0x%x)\n", parity);
+		dev_err(priv->port.dev, "Invalid parity(0x%x)\n", parity);
 		return -EINVAL;
 	}
 
 	if (bits & ~PCH_UART_LCR_WLS) {
-		pr_err("Invalid bits(0x%x)\n", bits);
+		dev_err(priv->port.dev, "Invalid bits(0x%x)\n", bits);
 		return -EINVAL;
 	}
 
 	if (stb & ~PCH_UART_LCR_STB) {
-		pr_err("Invalid STB(0x%x)\n", stb);
+		dev_err(priv->port.dev, "Invalid STB(0x%x)\n", stb);
 		return -EINVAL;
 	}
 
@@ -304,7 +340,7 @@ static int pch_uart_hal_set_line(struct eg20t_port *priv, int baud,
 	lcr |= bits;
 	lcr |= stb;
 
-	pr_debug("%s:baud = %d, div = %04x, lcr = %02x (%lu)\n",
+	dev_dbg(priv->port.dev, "%s:baud = %d, div = %04x, lcr = %02x (%lu)\n",
 		 __func__, baud, div, lcr, jiffies);
 	iowrite8(PCH_UART_LCR_DLAB, priv->membase + UART_LCR);
 	iowrite8(dll, priv->membase + PCH_UART_DLL);
@@ -318,7 +354,8 @@ static int pch_uart_hal_fifo_reset(struct eg20t_port *priv,
 				    unsigned int flag)
 {
 	if (flag & ~(PCH_UART_FCR_TFR | PCH_UART_FCR_RFR)) {
-		pr_err("%s:Invalid flag(0x%x)\n", __func__, flag);
+		dev_err(priv->port.dev, "%s:Invalid flag(0x%x)\n",
+			__func__, flag);
 		return -EINVAL;
 	}
 
@@ -337,17 +374,20 @@ static int pch_uart_hal_set_fifo(struct eg20t_port *priv,
 	u8 fcr;
 
 	if (dmamode & ~PCH_UART_FCR_DMS) {
-		pr_err("%s:Invalid DMA Mode(0x%x)\n", __func__, dmamode);
+		dev_err(priv->port.dev, "%s:Invalid DMA Mode(0x%x)\n",
+			__func__, dmamode);
 		return -EINVAL;
 	}
 
 	if (fifo_size & ~(PCH_UART_FCR_FIFOE | PCH_UART_FCR_FIFO256)) {
-		pr_err("%s:Invalid FIFO SIZE(0x%x)\n", __func__, fifo_size);
+		dev_err(priv->port.dev, "%s:Invalid FIFO SIZE(0x%x)\n",
+			__func__, fifo_size);
 		return -EINVAL;
 	}
 
 	if (trigger & ~PCH_UART_FCR_RFTL) {
-		pr_err("%s:Invalid TRIGGER(0x%x)\n", __func__, trigger);
+		dev_err(priv->port.dev, "%s:Invalid TRIGGER(0x%x)\n",
+			__func__, trigger);
 		return -EINVAL;
 	}
 
@@ -386,7 +426,7 @@ static u8 pch_uart_hal_get_modem(struct eg20t_port *priv)
 	return get_msr(priv, priv->membase);
 }
 
-static int pch_uart_hal_write(struct eg20t_port *priv,
+static void pch_uart_hal_write(struct eg20t_port *priv,
 			      const unsigned char *buf, int tx_size)
 {
 	int i;
@@ -396,7 +436,6 @@ static int pch_uart_hal_write(struct eg20t_port *priv,
 		thr = buf[i++];
 		iowrite8(thr, priv->membase + PCH_UART_THR);
 	}
-	return i;
 }
 
 static int pch_uart_hal_read(struct eg20t_port *priv, unsigned char *buf,
@@ -452,7 +491,7 @@ static int push_rx(struct eg20t_port *priv, const unsigned char *buf,
 	port = &priv->port;
 	tty = tty_port_tty_get(&port->state->port);
 	if (!tty) {
-		pr_debug("%s:tty is busy now", __func__);
+		dev_dbg(priv->port.dev, "%s:tty is busy now", __func__);
 		return -EBUSY;
 	}
 
@@ -469,8 +508,8 @@ static int pop_tx_x(struct eg20t_port *priv, unsigned char *buf)
 	struct uart_port *port = &priv->port;
 
 	if (port->x_char) {
-		pr_debug("%s:X character send %02x (%lu)\n", __func__,
-			port->x_char, jiffies);
+		dev_dbg(priv->port.dev, "%s:X character send %02x (%lu)\n",
+			__func__, port->x_char, jiffies);
 		buf[0] = port->x_char;
 		port->x_char = 0;
 		ret = 1;
@@ -490,7 +529,7 @@ static int dma_push_rx(struct eg20t_port *priv, int size)
 	port = &priv->port;
 	tty = tty_port_tty_get(&port->state->port);
 	if (!tty) {
-		pr_debug("%s:tty is busy now", __func__);
+		dev_dbg(priv->port.dev, "%s:tty is busy now", __func__);
 		return 0;
 	}
 
@@ -560,11 +599,13 @@ static void pch_request_dma(struct uart_port *port)
 	/* Set Tx DMA */
 	param = &priv->param_tx;
 	param->dma_dev = &dma_dev->dev;
-	param->chan_id = priv->port.line;
+	param->chan_id = priv->port.line * 2; /* Tx = 0, 2, 4, ... */
+
 	param->tx_reg = port->mapbase + UART_TX;
 	chan = dma_request_channel(mask, filter, param);
 	if (!chan) {
-		pr_err("%s:dma_request_channel FAILS(Tx)\n", __func__);
+		dev_err(priv->port.dev, "%s:dma_request_channel FAILS(Tx)\n",
+			__func__);
 		return;
 	}
 	priv->chan_tx = chan;
@@ -572,11 +613,13 @@ static void pch_request_dma(struct uart_port *port)
 	/* Set Rx DMA */
 	param = &priv->param_rx;
 	param->dma_dev = &dma_dev->dev;
-	param->chan_id = priv->port.line + 1; /* Rx = Tx + 1 */
+	param->chan_id = priv->port.line * 2 + 1; /* Rx = Tx + 1 */
+
 	param->rx_reg = port->mapbase + UART_RX;
 	chan = dma_request_channel(mask, filter, param);
 	if (!chan) {
-		pr_err("%s:dma_request_channel FAILS(Rx)\n", __func__);
+		dev_err(priv->port.dev, "%s:dma_request_channel FAILS(Rx)\n",
+			__func__);
 		dma_release_channel(priv->chan_tx);
 		return;
 	}
@@ -592,16 +635,20 @@ static void pch_dma_rx_complete(void *arg)
 	struct eg20t_port *priv = arg;
 	struct uart_port *port = &priv->port;
 	struct tty_struct *tty = tty_port_tty_get(&port->state->port);
+	int count;
 
 	if (!tty) {
-		pr_debug("%s:tty is busy now", __func__);
+		dev_dbg(priv->port.dev, "%s:tty is busy now", __func__);
 		return;
 	}
 
-	if (dma_push_rx(priv, priv->trigger_level))
+	dma_sync_sg_for_cpu(port->dev, &priv->sg_rx, 1, DMA_FROM_DEVICE);
+	count = dma_push_rx(priv, priv->trigger_level);
+	if (count)
 		tty_flip_buffer_push(tty);
-
 	tty_kref_put(tty);
+	async_tx_ack(priv->desc_rx);
+	pch_uart_hal_enable_interrupt(priv, PCH_UART_HAL_RX_INT);
 }
 
 static void pch_dma_tx_complete(void *arg)
@@ -609,16 +656,23 @@ static void pch_dma_tx_complete(void *arg)
 	struct eg20t_port *priv = arg;
 	struct uart_port *port = &priv->port;
 	struct circ_buf *xmit = &port->state->xmit;
+	struct scatterlist *sg = priv->sg_tx_p;
+	int i;
 
-	xmit->tail += sg_dma_len(&priv->sg_tx);
+	for (i = 0; i < priv->nent; i++, sg++) {
+		xmit->tail += sg_dma_len(sg);
+		port->icount.tx += sg_dma_len(sg);
+	}
 	xmit->tail &= UART_XMIT_SIZE - 1;
-	port->icount.tx += sg_dma_len(&priv->sg_tx);
-
 	async_tx_ack(priv->desc_tx);
+	dma_unmap_sg(port->dev, sg, priv->nent, DMA_TO_DEVICE);
 	priv->tx_dma_use = 0;
+	priv->nent = 0;
+	kfree(priv->sg_tx_p);
+	pch_uart_hal_enable_interrupt(priv, PCH_UART_HAL_TX_INT);
 }
 
-static int pop_tx(struct eg20t_port *priv, unsigned char *buf, int size)
+static int pop_tx(struct eg20t_port *priv, int size)
 {
 	int count = 0;
 	struct uart_port *port = &priv->port;
@@ -631,13 +685,13 @@ static int pop_tx(struct eg20t_port *priv, unsigned char *buf, int size)
 		int cnt_to_end =
 		    CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE);
 		int sz = min(size - count, cnt_to_end);
-		memcpy(&buf[count], &xmit->buf[xmit->tail], sz);
+		pch_uart_hal_write(priv, &xmit->buf[xmit->tail], sz);
 		xmit->tail = (xmit->tail + sz) & (UART_XMIT_SIZE - 1);
 		count += sz;
 	} while (!uart_circ_empty(xmit) && count < size);
 
 pop_tx_end:
-	pr_debug("%d characters. Remained %d characters. (%lu)\n",
+	dev_dbg(priv->port.dev, "%d characters. Remained %d characters.(%lu)\n",
 		 count, size - count, jiffies);
 
 	return count;
@@ -679,7 +733,7 @@ static int dma_handle_rx(struct eg20t_port *priv)
 
 	sg_init_table(&priv->sg_rx, 1); /* Initialize SG table */
 
-	sg_dma_len(sg) = priv->fifo_size;
+	sg_dma_len(sg) = priv->trigger_level;
 
 	sg_set_page(&priv->sg_rx, virt_to_page(priv->rx_buf_virt),
 		     sg_dma_len(sg), (unsigned long)priv->rx_buf_virt &
@@ -689,7 +743,8 @@ static int dma_handle_rx(struct eg20t_port *priv)
 
 	desc = priv->chan_rx->device->device_prep_slave_sg(priv->chan_rx,
 			sg, 1, DMA_FROM_DEVICE,
-			DMA_PREP_INTERRUPT);
+			DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
+
 	if (!desc)
 		return 0;
 
@@ -706,14 +761,14 @@ static unsigned int handle_tx(struct eg20t_port *priv)
 {
 	struct uart_port *port = &priv->port;
 	struct circ_buf *xmit = &port->state->xmit;
-	int ret;
 	int fifo_size;
 	int tx_size;
 	int size;
 	int tx_empty;
 
 	if (!priv->start_tx) {
-		pr_info("%s:Tx isn't started. (%lu)\n", __func__, jiffies);
+		dev_info(priv->port.dev, "%s:Tx isn't started. (%lu)\n",
+			__func__, jiffies);
 		pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_TX_INT);
 		priv->tx_empty = 1;
 		return 0;
@@ -728,17 +783,21 @@ static unsigned int handle_tx(struct eg20t_port *priv)
 		fifo_size--;
 	}
 	size = min(xmit->head - xmit->tail, fifo_size);
-	tx_size = pop_tx(priv, xmit->buf, size);
+	if (size < 0)
+		size = fifo_size;
+
+	tx_size = pop_tx(priv, size);
 	if (tx_size > 0) {
-		ret = pch_uart_hal_write(priv, xmit->buf, tx_size);
-		port->icount.tx += ret;
+		port->icount.tx += tx_size;
 		tx_empty = 0;
 	}
 
 	priv->tx_empty = tx_empty;
 
-	if (tx_empty)
+	if (tx_empty) {
 		pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_TX_INT);
+		uart_write_wakeup(port);
+	}
 
 	return PCH_UART_HANDLED_TX_INT;
 }
@@ -747,14 +806,28 @@ static unsigned int dma_handle_tx(struct eg20t_port *priv)
 {
 	struct uart_port *port = &priv->port;
 	struct circ_buf *xmit = &port->state->xmit;
-	struct scatterlist *sg = &priv->sg_tx;
+	struct scatterlist *sg;
 	int nent;
 	int fifo_size;
 	int tx_empty;
 	struct dma_async_tx_descriptor *desc;
+	int num;
+	int i;
+	int bytes;
+	int size;
+	int rem;
 
 	if (!priv->start_tx) {
-		pr_info("%s:Tx isn't started. (%lu)\n", __func__, jiffies);
+		dev_info(priv->port.dev, "%s:Tx isn't started. (%lu)\n",
+			__func__, jiffies);
+		pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_TX_INT);
+		priv->tx_empty = 1;
+		return 0;
+	}
+
+	if (priv->tx_dma_use) {
+		dev_dbg(priv->port.dev, "%s:Tx is not completed. (%lu)\n",
+			__func__, jiffies);
 		pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_TX_INT);
 		priv->tx_empty = 1;
 		return 0;
@@ -769,37 +842,73 @@ static unsigned int dma_handle_tx(struct eg20t_port *priv)
 		fifo_size--;
 	}
 
-	pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_TX_INT);
+	bytes = min((int)CIRC_CNT(xmit->head, xmit->tail,
+			     UART_XMIT_SIZE), CIRC_CNT_TO_END(xmit->head,
+			     xmit->tail, UART_XMIT_SIZE));
+	if (!bytes) {
+		dev_dbg(priv->port.dev, "%s 0 bytes return\n", __func__);
+		pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_TX_INT);
+		uart_write_wakeup(port);
+		return 0;
+	}
+
+	if (bytes > fifo_size) {
+		num = bytes / fifo_size + 1;
+		size = fifo_size;
+		rem = bytes % fifo_size;
+	} else {
+		num = 1;
+		size = bytes;
+		rem = bytes;
+	}
+
+	dev_dbg(priv->port.dev, "%s num=%d size=%d rem=%d\n",
+		__func__, num, size, rem);
 
 	priv->tx_dma_use = 1;
 
-	sg_init_table(&priv->sg_tx, 1); /* Initialize SG table */
+	priv->sg_tx_p = kzalloc(sizeof(struct scatterlist)*num, GFP_ATOMIC);
 
-	sg_set_page(&priv->sg_tx, virt_to_page(xmit->buf),
-		    UART_XMIT_SIZE, (int)xmit->buf & ~PAGE_MASK);
+	sg_init_table(priv->sg_tx_p, num); /* Initialize SG table */
+	sg = priv->sg_tx_p;
 
-	nent = dma_map_sg(port->dev, &priv->sg_tx, 1, DMA_TO_DEVICE);
+	for (i = 0; i < num; i++, sg++) {
+		if (i == (num - 1))
+			sg_set_page(sg, virt_to_page(xmit->buf),
+				    rem, fifo_size * i);
+		else
+			sg_set_page(sg, virt_to_page(xmit->buf),
+				    size, fifo_size * i);
+	}
+
+	sg = priv->sg_tx_p;
+	nent = dma_map_sg(port->dev, sg, num, DMA_TO_DEVICE);
 	if (!nent) {
-		pr_err("%s:dma_map_sg Failed\n", __func__);
+		dev_err(priv->port.dev, "%s:dma_map_sg Failed\n", __func__);
 		return 0;
 	}
-
-	sg->offset = xmit->tail & (UART_XMIT_SIZE - 1);
-	sg_dma_address(sg) = (sg_dma_address(sg) & ~(UART_XMIT_SIZE - 1)) +
-			      sg->offset;
-	sg_dma_len(sg) = min((int)CIRC_CNT(xmit->head, xmit->tail,
-			     UART_XMIT_SIZE), CIRC_CNT_TO_END(xmit->head,
-			     xmit->tail, UART_XMIT_SIZE));
+	priv->nent = nent;
+
+	for (i = 0; i < nent; i++, sg++) {
+		sg->offset = (xmit->tail & (UART_XMIT_SIZE - 1)) +
+			      fifo_size * i;
+		sg_dma_address(sg) = (sg_dma_address(sg) &
+				    ~(UART_XMIT_SIZE - 1)) + sg->offset;
+		if (i == (nent - 1))
+			sg_dma_len(sg) = rem;
+		else
+			sg_dma_len(sg) = size;
+	}
 
 	desc = priv->chan_tx->device->device_prep_slave_sg(priv->chan_tx,
-		sg, nent, DMA_TO_DEVICE, DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
+					priv->sg_tx_p, nent, DMA_TO_DEVICE,
+					DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
 	if (!desc) {
-		pr_err("%s:device_prep_slave_sg Failed\n", __func__);
+		dev_err(priv->port.dev, "%s:device_prep_slave_sg Failed\n",
+			__func__);
 		return 0;
 	}
-
-	dma_sync_sg_for_device(port->dev, sg, 1, DMA_TO_DEVICE);
-
+	dma_sync_sg_for_device(port->dev, priv->sg_tx_p, nent, DMA_TO_DEVICE);
 	priv->desc_tx = desc;
 	desc->callback = pch_dma_tx_complete;
 	desc->callback_param = priv;
@@ -854,10 +963,16 @@ static irqreturn_t pch_uart_interrupt(int irq, void *dev_id)
 			}
 			break;
 		case PCH_UART_IID_RDR:	/* Received Data Ready */
-			if (priv->use_dma)
+			if (priv->use_dma) {
+				pch_uart_hal_disable_interrupt(priv,
+							PCH_UART_HAL_RX_INT);
 				ret = dma_handle_rx(priv);
-			else
+				if (!ret)
+					pch_uart_hal_enable_interrupt(priv,
+							PCH_UART_HAL_RX_INT);
+			} else {
 				ret = handle_rx(priv);
+			}
 			break;
 		case PCH_UART_IID_RDR_TO:	/* Received Data Ready
 						   (FIFO Timeout) */
@@ -874,7 +989,8 @@ static irqreturn_t pch_uart_interrupt(int irq, void *dev_id)
 			ret = PCH_UART_HANDLED_MS_INT;
 			break;
 		default:	/* Never junp to this label */
-			pr_err("%s:iid=%d (%lu)\n", __func__, iid, jiffies);
+			dev_err(priv->port.dev, "%s:iid=%d (%lu)\n", __func__,
+				iid, jiffies);
 			ret = -1;
 			break;
 		}
@@ -932,7 +1048,6 @@ static unsigned int pch_uart_get_mctrl(struct uart_port *port)
 static void pch_uart_set_mctrl(struct uart_port *port, unsigned int mctrl)
 {
 	u32 mcr = 0;
-	unsigned int dat;
 	struct eg20t_port *priv = container_of(port, struct eg20t_port, port);
 
 	if (mctrl & TIOCM_DTR)
@@ -942,11 +1057,11 @@ static void pch_uart_set_mctrl(struct uart_port *port, unsigned int mctrl)
 	if (mctrl & TIOCM_LOOP)
 		mcr |= UART_MCR_LOOP;
 
-	if (mctrl) {
-		dat = pch_uart_get_mctrl(port);
-		dat |= mcr;
-		iowrite8(dat, priv->membase + UART_MCR);
-	}
+	if (priv->mcr & UART_MCR_AFE)
+		mcr |= UART_MCR_AFE;
+
+	if (mctrl)
+		iowrite8(mcr, priv->membase + UART_MCR);
 }
 
 static void pch_uart_stop_tx(struct uart_port *port)
@@ -963,9 +1078,13 @@ static void pch_uart_start_tx(struct uart_port *port)
 
 	priv = container_of(port, struct eg20t_port, port);
 
-	if (priv->use_dma)
-		if (priv->tx_dma_use)
+	if (priv->use_dma) {
+		if (priv->tx_dma_use) {
+			dev_dbg(priv->port.dev, "%s : Tx DMA is NOT empty.\n",
+				__func__);
 			return;
+		}
+	}
 
 	priv->start_tx = 1;
 	pch_uart_hal_enable_interrupt(priv, PCH_UART_HAL_TX_INT);
@@ -1010,7 +1129,12 @@ static int pch_uart_startup(struct uart_port *port)
 
 	priv = container_of(port, struct eg20t_port, port);
 	priv->tx_empty = 1;
-	port->uartclk = priv->base_baud;
+
+	if (port->uartclk)
+		priv->base_baud = port->uartclk;
+	else
+		port->uartclk = priv->base_baud;
+
 	pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_ALL_INT);
 	ret = pch_uart_hal_set_line(priv, default_baud,
 			      PCH_UART_HAL_PARITY_NONE, PCH_UART_HAL_8BIT,
@@ -1081,7 +1205,8 @@ static void pch_uart_shutdown(struct uart_port *port)
 	ret = pch_uart_hal_set_fifo(priv, PCH_UART_HAL_DMA_MODE0,
 			      PCH_UART_HAL_FIFO_DIS, PCH_UART_HAL_TRIGGER1);
 	if (ret)
-		pr_err("pch_uart_hal_set_fifo Failed(ret=%d)\n", ret);
+		dev_err(priv->port.dev,
+			"pch_uart_hal_set_fifo Failed(ret=%d)\n", ret);
 
 	if (priv->use_dma_flag)
 		pch_free_dma(port);
@@ -1130,6 +1255,13 @@ static void pch_uart_set_termios(struct uart_port *port,
 	} else {
 		parity = PCH_UART_HAL_PARITY_NONE;
 	}
+
+	/* Only UART0 has auto hardware flow function */
+	if ((termios->c_cflag & CRTSCTS) && (priv->fifo_size == 256))
+		priv->mcr |= UART_MCR_AFE;
+	else
+		priv->mcr &= ~UART_MCR_AFE;
+
 	termios->c_cflag &= ~CMSPAR; /* Mark/Space parity is not supported */
 
 	baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk / 16);
@@ -1202,17 +1334,19 @@ static int pch_uart_verify_port(struct uart_port *port,
 
 	priv = container_of(port, struct eg20t_port, port);
 	if (serinfo->flags & UPF_LOW_LATENCY) {
-		pr_info("PCH UART : Use PIO Mode (without DMA)\n");
+		dev_info(priv->port.dev,
+			"PCH UART : Use PIO Mode (without DMA)\n");
 		priv->use_dma = 0;
 		serinfo->flags &= ~UPF_LOW_LATENCY;
 	} else {
 #ifndef CONFIG_PCH_DMA
-		pr_err("%s : PCH DMA is not Loaded.\n", __func__);
+		dev_err(priv->port.dev, "%s : PCH DMA is not Loaded.\n",
+			__func__);
 		return -EOPNOTSUPP;
 #endif
 		priv->use_dma = 1;
 		priv->use_dma_flag = 1;
-		pr_info("PCH UART : Use DMA Mode\n");
+		dev_info(priv->port.dev, "PCH UART : Use DMA Mode\n");
 	}
 
 	return 0;
@@ -1249,7 +1383,7 @@ static struct uart_driver pch_uart_driver = {
 };
 
 static struct eg20t_port *pch_uart_init_port(struct pci_dev *pdev,
-						int port_type)
+					     const struct pci_device_id *id)
 {
 	struct eg20t_port *priv;
 	int ret;
@@ -1257,7 +1391,11 @@ static struct eg20t_port *pch_uart_init_port(struct pci_dev *pdev,
 	unsigned int mapbase;
 	unsigned char *rxbuf;
 	int fifosize, base_baud;
-	static int num;
+	int port_type;
+	struct pch_uart_driver_data *board;
+
+	board = &drv_dat[id->driver_data];
+	port_type = board->port_type;
 
 	priv = kzalloc(sizeof(struct eg20t_port), GFP_KERNEL);
 	if (priv == NULL)
@@ -1267,14 +1405,18 @@ static struct eg20t_port *pch_uart_init_port(struct pci_dev *pdev,
 	if (!rxbuf)
 		goto init_port_free_txbuf;
 
+	base_baud = 1843200; /* 1.8432MHz */
+
+	/* quirk for CM-iTC board */
+	if (strstr(dmi_get_system_info(DMI_BOARD_NAME), "CM-iTC"))
+		base_baud = 192000000; /* 192.0MHz */
+
 	switch (port_type) {
 	case PORT_UNKNOWN:
-		fifosize = 256; /* UART0 */
-		base_baud = 1843200; /* 1.8432MHz */
+		fifosize = 256; /* EG20T/ML7213: UART0 */
 		break;
 	case PORT_8250:
-		fifosize = 64; /* UART1~3 */
-		base_baud = 1843200; /* 1.8432MHz */
+		fifosize = 64; /* EG20T:UART1~3  ML7213: UART1~2*/
 		break;
 	default:
 		dev_err(&pdev->dev, "Invalid Port Type(=%d)\n", port_type);
@@ -1302,11 +1444,14 @@ static struct eg20t_port *pch_uart_init_port(struct pci_dev *pdev,
 	priv->port.ops = &pch_uart_ops;
 	priv->port.flags = UPF_BOOT_AUTOCONF;
 	priv->port.fifosize = fifosize;
-	priv->port.line = num++;
+	priv->port.line = board->line_no;
 	priv->trigger = PCH_UART_HAL_TRIGGER_M;
 
+	spin_lock_init(&priv->port.lock);
+
 	pci_set_drvdata(pdev, priv);
 	pch_uart_hal_request(pdev, fifosize, base_baud);
+
 	ret = uart_add_one_port(&pch_uart_driver, &priv->port);
 	if (ret < 0)
 		goto init_port_hal_free;
@@ -1377,13 +1522,19 @@ static int pch_uart_pci_resume(struct pci_dev *pdev)
 
 static DEFINE_PCI_DEVICE_TABLE(pch_uart_pci_id) = {
 	{PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x8811),
-	 .driver_data = PCH_UART_8LINE},
+	 .driver_data = pch_et20t_uart0},
 	{PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x8812),
-	 .driver_data = PCH_UART_2LINE},
+	 .driver_data = pch_et20t_uart1},
 	{PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x8813),
-	 .driver_data = PCH_UART_2LINE},
+	 .driver_data = pch_et20t_uart2},
 	{PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x8814),
-	 .driver_data = PCH_UART_2LINE},
+	 .driver_data = pch_et20t_uart3},
+	{PCI_DEVICE(PCI_VENDOR_ID_ROHM, 0x8027),
+	 .driver_data = pch_ml7213_uart0},
+	{PCI_DEVICE(PCI_VENDOR_ID_ROHM, 0x8028),
+	 .driver_data = pch_ml7213_uart1},
+	{PCI_DEVICE(PCI_VENDOR_ID_ROHM, 0x8029),
+	 .driver_data = pch_ml7213_uart2},
 	{0,},
 };
 
@@ -1397,7 +1548,7 @@ static int __devinit pch_uart_pci_probe(struct pci_dev *pdev,
 	if (ret < 0)
 		goto probe_error;
 
-	priv = pch_uart_init_port(pdev, id->driver_data);
+	priv = pch_uart_init_port(pdev, id);
 	if (!priv) {
 		ret = -EBUSY;
 		goto probe_disable_device;
diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c
index 460a72d91bb7..733fe8e73f0f 100644
--- a/drivers/tty/serial/serial_core.c
+++ b/drivers/tty/serial/serial_core.c
@@ -905,7 +905,7 @@ static int uart_get_lsr_info(struct tty_struct *tty,
 	return put_user(result, value);
 }
 
-static int uart_tiocmget(struct tty_struct *tty, struct file *file)
+static int uart_tiocmget(struct tty_struct *tty)
 {
 	struct uart_state *state = tty->driver_data;
 	struct tty_port *port = &state->port;
@@ -913,10 +913,8 @@ static int uart_tiocmget(struct tty_struct *tty, struct file *file)
 	int result = -EIO;
 
 	mutex_lock(&port->mutex);
-	if ((!file || !tty_hung_up_p(file)) &&
-	    !(tty->flags & (1 << TTY_IO_ERROR))) {
+	if (!(tty->flags & (1 << TTY_IO_ERROR))) {
 		result = uport->mctrl;
-
 		spin_lock_irq(&uport->lock);
 		result |= uport->ops->get_mctrl(uport);
 		spin_unlock_irq(&uport->lock);
@@ -927,8 +925,7 @@ static int uart_tiocmget(struct tty_struct *tty, struct file *file)
 }
 
 static int
-uart_tiocmset(struct tty_struct *tty, struct file *file,
-	      unsigned int set, unsigned int clear)
+uart_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear)
 {
 	struct uart_state *state = tty->driver_data;
 	struct uart_port *uport = state->uart_port;
@@ -936,8 +933,7 @@ uart_tiocmset(struct tty_struct *tty, struct file *file,
 	int ret = -EIO;
 
 	mutex_lock(&port->mutex);
-	if ((!file || !tty_hung_up_p(file)) &&
-	    !(tty->flags & (1 << TTY_IO_ERROR))) {
+	if (!(tty->flags & (1 << TTY_IO_ERROR))) {
 		uart_update_mctrl(uport, set, clear);
 		ret = 0;
 	}
@@ -1103,7 +1099,7 @@ static int uart_get_icount(struct tty_struct *tty,
  * Called via sys_ioctl.  We can use spin_lock_irq() here.
  */
 static int
-uart_ioctl(struct tty_struct *tty, struct file *filp, unsigned int cmd,
+uart_ioctl(struct tty_struct *tty, unsigned int cmd,
 	   unsigned long arg)
 {
 	struct uart_state *state = tty->driver_data;
@@ -1156,7 +1152,7 @@ uart_ioctl(struct tty_struct *tty, struct file *filp, unsigned int cmd,
 
 	mutex_lock(&port->mutex);
 
-	if (tty_hung_up_p(filp)) {
+	if (tty->flags & (1 << TTY_IO_ERROR)) {
 		ret = -EIO;
 		goto out_up;
 	}
@@ -2064,7 +2060,7 @@ int uart_resume_port(struct uart_driver *drv, struct uart_port *uport)
 	/*
 	 * Re-enable the console device after suspending.
 	 */
-	if (console_suspend_enabled && uart_console(uport)) {
+	if (uart_console(uport)) {
 		/*
 		 * First try to use the console cflag setting.
 		 */
@@ -2077,9 +2073,9 @@ int uart_resume_port(struct uart_driver *drv, struct uart_port *uport)
 		if (port->tty && port->tty->termios && termios.c_cflag == 0)
 			termios = *(port->tty->termios);
 
-		uart_change_pm(state, 0);
 		uport->ops->set_termios(uport, &termios, NULL);
-		console_start(uport->cons);
+		if (console_suspend_enabled)
+			console_start(uport->cons);
 	}
 
 	if (port->flags & ASYNC_SUSPENDED) {
diff --git a/drivers/char/synclink.c b/drivers/tty/synclink.c
index 3a6824f12be2..18888d005a0a 100644
--- a/drivers/char/synclink.c
+++ b/drivers/tty/synclink.c
@@ -823,8 +823,8 @@ static isr_dispatch_func UscIsrTable[7] =
 /*
  * ioctl call handlers
  */
-static int tiocmget(struct tty_struct *tty, struct file *file);
-static int tiocmset(struct tty_struct *tty, struct file *file,
+static int tiocmget(struct tty_struct *tty);
+static int tiocmset(struct tty_struct *tty,
 		    unsigned int set, unsigned int clear);
 static int mgsl_get_stats(struct mgsl_struct * info, struct mgsl_icount
 	__user *user_icount);
@@ -2846,7 +2846,7 @@ static int modem_input_wait(struct mgsl_struct *info,int arg)
 
 /* return the state of the serial control and status signals
  */
-static int tiocmget(struct tty_struct *tty, struct file *file)
+static int tiocmget(struct tty_struct *tty)
 {
 	struct mgsl_struct *info = tty->driver_data;
 	unsigned int result;
@@ -2871,8 +2871,8 @@ static int tiocmget(struct tty_struct *tty, struct file *file)
 
 /* set modem control signals (DTR/RTS)
  */
-static int tiocmset(struct tty_struct *tty, struct file *file,
-		    unsigned int set, unsigned int clear)
+static int tiocmset(struct tty_struct *tty,
+				    unsigned int set, unsigned int clear)
 {
 	struct mgsl_struct *info = tty->driver_data;
  	unsigned long flags;
@@ -2962,13 +2962,12 @@ static int msgl_get_icount(struct tty_struct *tty,
  * Arguments:
  * 
  * 	tty	pointer to tty instance data
- * 	file	pointer to associated file object for device
  * 	cmd	IOCTL command code
  * 	arg	command argument/context
  * 	
  * Return Value:	0 if success, otherwise error code
  */
-static int mgsl_ioctl(struct tty_struct *tty, struct file * file,
+static int mgsl_ioctl(struct tty_struct *tty,
 		    unsigned int cmd, unsigned long arg)
 {
 	struct mgsl_struct * info = tty->driver_data;
diff --git a/drivers/char/synclink_gt.c b/drivers/tty/synclink_gt.c
index d01fffeac951..a35dd549a008 100644
--- a/drivers/char/synclink_gt.c
+++ b/drivers/tty/synclink_gt.c
@@ -154,7 +154,7 @@ static void flush_buffer(struct tty_struct *tty);
 static void tx_hold(struct tty_struct *tty);
 static void tx_release(struct tty_struct *tty);
 
-static int  ioctl(struct tty_struct *tty, struct file *file, unsigned int cmd, unsigned long arg);
+static int  ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg);
 static int  chars_in_buffer(struct tty_struct *tty);
 static void throttle(struct tty_struct * tty);
 static void unthrottle(struct tty_struct * tty);
@@ -512,9 +512,9 @@ static int  tx_abort(struct slgt_info *info);
 static int  rx_enable(struct slgt_info *info, int enable);
 static int  modem_input_wait(struct slgt_info *info,int arg);
 static int  wait_mgsl_event(struct slgt_info *info, int __user *mask_ptr);
-static int  tiocmget(struct tty_struct *tty, struct file *file);
-static int  tiocmset(struct tty_struct *tty, struct file *file,
-		     unsigned int set, unsigned int clear);
+static int  tiocmget(struct tty_struct *tty);
+static int  tiocmset(struct tty_struct *tty,
+				unsigned int set, unsigned int clear);
 static int set_break(struct tty_struct *tty, int break_state);
 static int  get_interface(struct slgt_info *info, int __user *if_mode);
 static int  set_interface(struct slgt_info *info, int if_mode);
@@ -1030,13 +1030,12 @@ static void tx_release(struct tty_struct *tty)
  * Arguments
  *
  * 	tty	pointer to tty instance data
- * 	file	pointer to associated file object for device
  * 	cmd	IOCTL command code
  * 	arg	command argument/context
  *
  * Return 0 if success, otherwise error code
  */
-static int ioctl(struct tty_struct *tty, struct file *file,
+static int ioctl(struct tty_struct *tty,
 		 unsigned int cmd, unsigned long arg)
 {
 	struct slgt_info *info = tty->driver_data;
@@ -1200,7 +1199,7 @@ static long set_params32(struct slgt_info *info, struct MGSL_PARAMS32 __user *ne
 	return 0;
 }
 
-static long slgt_compat_ioctl(struct tty_struct *tty, struct file *file,
+static long slgt_compat_ioctl(struct tty_struct *tty,
 			 unsigned int cmd, unsigned long arg)
 {
 	struct slgt_info *info = tty->driver_data;
@@ -1239,7 +1238,7 @@ static long slgt_compat_ioctl(struct tty_struct *tty, struct file *file,
 	case MGSL_IOCSIF:
 	case MGSL_IOCSXSYNC:
 	case MGSL_IOCSXCTRL:
-		rc = ioctl(tty, file, cmd, arg);
+		rc = ioctl(tty, cmd, arg);
 		break;
 	}
 
@@ -3195,7 +3194,7 @@ static int modem_input_wait(struct slgt_info *info,int arg)
 /*
  *  return state of serial control and status signals
  */
-static int tiocmget(struct tty_struct *tty, struct file *file)
+static int tiocmget(struct tty_struct *tty)
 {
 	struct slgt_info *info = tty->driver_data;
 	unsigned int result;
@@ -3223,7 +3222,7 @@ static int tiocmget(struct tty_struct *tty, struct file *file)
  *		TIOCMSET = set/clear signal values
  * 	value	bit mask for command
  */
-static int tiocmset(struct tty_struct *tty, struct file *file,
+static int tiocmset(struct tty_struct *tty,
 		    unsigned int set, unsigned int clear)
 {
 	struct slgt_info *info = tty->driver_data;
diff --git a/drivers/char/synclinkmp.c b/drivers/tty/synclinkmp.c
index 2f9eb4b0dec1..327343694473 100644
--- a/drivers/char/synclinkmp.c
+++ b/drivers/tty/synclinkmp.c
@@ -520,7 +520,7 @@ static void flush_buffer(struct tty_struct *tty);
 static void tx_hold(struct tty_struct *tty);
 static void tx_release(struct tty_struct *tty);
 
-static int  ioctl(struct tty_struct *tty, struct file *file, unsigned int cmd, unsigned long arg);
+static int  ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg);
 static int  chars_in_buffer(struct tty_struct *tty);
 static void throttle(struct tty_struct * tty);
 static void unthrottle(struct tty_struct * tty);
@@ -546,9 +546,9 @@ static int  tx_abort(SLMP_INFO *info);
 static int  rx_enable(SLMP_INFO *info, int enable);
 static int  modem_input_wait(SLMP_INFO *info,int arg);
 static int  wait_mgsl_event(SLMP_INFO *info, int __user *mask_ptr);
-static int  tiocmget(struct tty_struct *tty, struct file *file);
-static int  tiocmset(struct tty_struct *tty, struct file *file,
-		     unsigned int set, unsigned int clear);
+static int  tiocmget(struct tty_struct *tty);
+static int  tiocmset(struct tty_struct *tty,
+			unsigned int set, unsigned int clear);
 static int  set_break(struct tty_struct *tty, int break_state);
 
 static void add_device(SLMP_INFO *info);
@@ -1248,13 +1248,12 @@ static void tx_release(struct tty_struct *tty)
  * Arguments:
  *
  * 	tty	pointer to tty instance data
- * 	file	pointer to associated file object for device
  * 	cmd	IOCTL command code
  * 	arg	command argument/context
  *
  * Return Value:	0 if success, otherwise error code
  */
-static int ioctl(struct tty_struct *tty, struct file *file,
+static int ioctl(struct tty_struct *tty,
 		 unsigned int cmd, unsigned long arg)
 {
 	SLMP_INFO *info = tty->driver_data;
@@ -3207,7 +3206,7 @@ static int modem_input_wait(SLMP_INFO *info,int arg)
 
 /* return the state of the serial control and status signals
  */
-static int tiocmget(struct tty_struct *tty, struct file *file)
+static int tiocmget(struct tty_struct *tty)
 {
 	SLMP_INFO *info = tty->driver_data;
 	unsigned int result;
@@ -3232,8 +3231,8 @@ static int tiocmget(struct tty_struct *tty, struct file *file)
 
 /* set modem control signals (DTR/RTS)
  */
-static int tiocmset(struct tty_struct *tty, struct file *file,
-		    unsigned int set, unsigned int clear)
+static int tiocmset(struct tty_struct *tty,
+					unsigned int set, unsigned int clear)
 {
 	SLMP_INFO *info = tty->driver_data;
  	unsigned long flags;
diff --git a/drivers/tty/tty_audit.c b/drivers/tty/tty_audit.c
index f64582b0f623..7c5866920622 100644
--- a/drivers/tty/tty_audit.c
+++ b/drivers/tty/tty_audit.c
@@ -95,8 +95,10 @@ static void tty_audit_buf_push(struct task_struct *tsk, uid_t loginuid,
 {
 	if (buf->valid == 0)
 		return;
-	if (audit_enabled == 0)
+	if (audit_enabled == 0) {
+		buf->valid = 0;
 		return;
+	}
 	tty_audit_log("tty", tsk, loginuid, sessionid, buf->major, buf->minor,
 		      buf->data, buf->valid);
 	buf->valid = 0;
diff --git a/drivers/tty/tty_io.c b/drivers/tty/tty_io.c
index 0065da4b11c1..8ef2d69470ec 100644
--- a/drivers/tty/tty_io.c
+++ b/drivers/tty/tty_io.c
@@ -2465,12 +2465,12 @@ out:
  *	Locking: none (up to the driver)
  */
 
-static int tty_tiocmget(struct tty_struct *tty, struct file *file, int __user *p)
+static int tty_tiocmget(struct tty_struct *tty, int __user *p)
 {
 	int retval = -EINVAL;
 
 	if (tty->ops->tiocmget) {
-		retval = tty->ops->tiocmget(tty, file);
+		retval = tty->ops->tiocmget(tty);
 
 		if (retval >= 0)
 			retval = put_user(retval, p);
@@ -2481,7 +2481,6 @@ static int tty_tiocmget(struct tty_struct *tty, struct file *file, int __user *p
 /**
  *	tty_tiocmset		-	set modem status
  *	@tty: tty device
- *	@file: user file pointer
  *	@cmd: command - clear bits, set bits or set all
  *	@p: pointer to desired bits
  *
@@ -2491,7 +2490,7 @@ static int tty_tiocmget(struct tty_struct *tty, struct file *file, int __user *p
  *	Locking: none (up to the driver)
  */
 
-static int tty_tiocmset(struct tty_struct *tty, struct file *file, unsigned int cmd,
+static int tty_tiocmset(struct tty_struct *tty, unsigned int cmd,
 	     unsigned __user *p)
 {
 	int retval;
@@ -2518,7 +2517,7 @@ static int tty_tiocmset(struct tty_struct *tty, struct file *file, unsigned int
 	}
 	set &= TIOCM_DTR|TIOCM_RTS|TIOCM_OUT1|TIOCM_OUT2|TIOCM_LOOP;
 	clear &= TIOCM_DTR|TIOCM_RTS|TIOCM_OUT1|TIOCM_OUT2|TIOCM_LOOP;
-	return tty->ops->tiocmset(tty, file, set, clear);
+	return tty->ops->tiocmset(tty, set, clear);
 }
 
 static int tty_tiocgicount(struct tty_struct *tty, void __user *arg)
@@ -2627,6 +2626,11 @@ long tty_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 		return put_user(tty->ldisc->ops->num, (int __user *)p);
 	case TIOCSETD:
 		return tiocsetd(tty, p);
+	case TIOCVHANGUP:
+		if (!capable(CAP_SYS_ADMIN))
+			return -EPERM;
+		tty_vhangup(tty);
+		return 0;
 	case TIOCGDEV:
 	{
 		unsigned int ret = new_encode_dev(tty_devnum(real_tty));
@@ -2655,11 +2659,11 @@ long tty_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 		return send_break(tty, arg ? arg*100 : 250);
 
 	case TIOCMGET:
-		return tty_tiocmget(tty, file, p);
+		return tty_tiocmget(tty, p);
 	case TIOCMSET:
 	case TIOCMBIC:
 	case TIOCMBIS:
-		return tty_tiocmset(tty, file, cmd, p);
+		return tty_tiocmset(tty, cmd, p);
 	case TIOCGICOUNT:
 		retval = tty_tiocgicount(tty, p);
 		/* For the moment allow fall through to the old method */
@@ -2677,7 +2681,7 @@ long tty_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 		break;
 	}
 	if (tty->ops->ioctl) {
-		retval = (tty->ops->ioctl)(tty, file, cmd, arg);
+		retval = (tty->ops->ioctl)(tty, cmd, arg);
 		if (retval != -ENOIOCTLCMD)
 			return retval;
 	}
@@ -2705,7 +2709,7 @@ static long tty_compat_ioctl(struct file *file, unsigned int cmd,
 		return -EINVAL;
 
 	if (tty->ops->compat_ioctl) {
-		retval = (tty->ops->compat_ioctl)(tty, file, cmd, arg);
+		retval = (tty->ops->compat_ioctl)(tty, cmd, arg);
 		if (retval != -ENOIOCTLCMD)
 			return retval;
 	}
diff --git a/drivers/tty/tty_ioctl.c b/drivers/tty/tty_ioctl.c
index 0c1889971459..1a1135d580a2 100644
--- a/drivers/tty/tty_ioctl.c
+++ b/drivers/tty/tty_ioctl.c
@@ -486,7 +486,7 @@ int tty_termios_hw_change(struct ktermios *a, struct ktermios *b)
 EXPORT_SYMBOL(tty_termios_hw_change);
 
 /**
- *	change_termios		-	update termios values
+ *	tty_set_termios		-	update termios values
  *	@tty: tty to update
  *	@new_termios: desired new value
  *
@@ -497,7 +497,7 @@ EXPORT_SYMBOL(tty_termios_hw_change);
  *	Locking: termios_mutex
  */
 
-static void change_termios(struct tty_struct *tty, struct ktermios *new_termios)
+int tty_set_termios(struct tty_struct *tty, struct ktermios *new_termios)
 {
 	struct ktermios old_termios;
 	struct tty_ldisc *ld;
@@ -553,7 +553,9 @@ static void change_termios(struct tty_struct *tty, struct ktermios *new_termios)
 		tty_ldisc_deref(ld);
 	}
 	mutex_unlock(&tty->termios_mutex);
+	return 0;
 }
+EXPORT_SYMBOL_GPL(tty_set_termios);
 
 /**
  *	set_termios		-	set termios values for a tty
@@ -562,7 +564,7 @@ static void change_termios(struct tty_struct *tty, struct ktermios *new_termios)
  *	@opt: option information
  *
  *	Helper function to prepare termios data and run necessary other
- *	functions before using change_termios to do the actual changes.
+ *	functions before using tty_set_termios to do the actual changes.
  *
  *	Locking:
  *		Called functions take ldisc and termios_mutex locks
@@ -620,7 +622,7 @@ static int set_termios(struct tty_struct *tty, void __user *arg, int opt)
 			return -EINTR;
 	}
 
-	change_termios(tty, &tmp_termios);
+	tty_set_termios(tty, &tmp_termios);
 
 	/* FIXME: Arguably if tmp_termios == tty->termios AND the
 	   actual requested termios was not tmp_termios then we may
@@ -797,7 +799,7 @@ static int set_sgttyb(struct tty_struct *tty, struct sgttyb __user *sgttyb)
 						termios.c_ospeed);
 #endif
 	mutex_unlock(&tty->termios_mutex);
-	change_termios(tty, &termios);
+	tty_set_termios(tty, &termios);
 	return 0;
 }
 #endif
@@ -951,6 +953,8 @@ int tty_mode_ioctl(struct tty_struct *tty, struct file *file,
 	int ret = 0;
 	struct ktermios kterm;
 
+	BUG_ON(file == NULL);
+
 	if (tty->driver->type == TTY_DRIVER_TYPE_PTY &&
 	    tty->driver->subtype == PTY_TYPE_MASTER)
 		real_tty = tty->link;
diff --git a/drivers/tty/tty_ldisc.c b/drivers/tty/tty_ldisc.c
index 4214d58276f7..c42f402db9ba 100644
--- a/drivers/tty/tty_ldisc.c
+++ b/drivers/tty/tty_ldisc.c
@@ -535,6 +535,19 @@ static int tty_ldisc_halt(struct tty_struct *tty)
 }
 
 /**
+ *	tty_ldisc_flush_works	-	flush all works of a tty
+ *	@tty: tty device to flush works for
+ *
+ *	Sync flush all works belonging to @tty.
+ */
+static void tty_ldisc_flush_works(struct tty_struct *tty)
+{
+	flush_work_sync(&tty->hangup_work);
+	flush_work_sync(&tty->SAK_work);
+	flush_delayed_work_sync(&tty->buf.work);
+}
+
+/**
  *	tty_ldisc_wait_idle	-	wait for the ldisc to become idle
  *	@tty: tty to wait for
  *
@@ -653,7 +666,7 @@ int tty_set_ldisc(struct tty_struct *tty, int ldisc)
 
 	mutex_unlock(&tty->ldisc_mutex);
 
-	flush_scheduled_work();
+	tty_ldisc_flush_works(tty);
 
 	retval = tty_ldisc_wait_idle(tty);
 
@@ -905,7 +918,7 @@ void tty_ldisc_release(struct tty_struct *tty, struct tty_struct *o_tty)
 
 	tty_unlock();
 	tty_ldisc_halt(tty);
-	flush_scheduled_work();
+	tty_ldisc_flush_works(tty);
 	tty_lock();
 
 	mutex_lock(&tty->ldisc_mutex);
diff --git a/drivers/tty/vt/keyboard.c b/drivers/tty/vt/keyboard.c
index e95d7876ca6b..6dd3c68c13ad 100644
--- a/drivers/tty/vt/keyboard.c
+++ b/drivers/tty/vt/keyboard.c
@@ -654,7 +654,8 @@ static void k_spec(struct vc_data *vc, unsigned char value, char up_flag)
 	if (value >= ARRAY_SIZE(fn_handler))
 		return;
 	if ((kbd->kbdmode == VC_RAW ||
-	     kbd->kbdmode == VC_MEDIUMRAW) &&
+	     kbd->kbdmode == VC_MEDIUMRAW ||
+	     kbd->kbdmode == VC_OFF) &&
 	     value != KVAL(K_SAK))
 		return;		/* SAK is allowed even in raw mode */
 	fn_handler[value](vc);
@@ -1295,7 +1296,7 @@ static void kbd_keycode(unsigned int keycode, int down, int hw_raw)
 	if (rc == NOTIFY_STOP)
 		return;
 
-	if (raw_mode && type != KT_SPEC && type != KT_SHIFT)
+	if ((raw_mode || kbd->kbdmode == VC_OFF) && type != KT_SPEC && type != KT_SHIFT)
 		return;
 
 	(*k_handler[type])(vc, keysym & 0xff, !down);
diff --git a/drivers/tty/vt/vc_screen.c b/drivers/tty/vt/vc_screen.c
index a672ed192d33..7b3bfbe2e6de 100644
--- a/drivers/tty/vt/vc_screen.c
+++ b/drivers/tty/vt/vc_screen.c
@@ -28,7 +28,6 @@
 #include <linux/interrupt.h>
 #include <linux/mm.h>
 #include <linux/init.h>
-#include <linux/mutex.h>
 #include <linux/vt_kern.h>
 #include <linux/selection.h>
 #include <linux/kbd_kern.h>
@@ -51,6 +50,8 @@
 #undef addr
 #define HEADER_SIZE	4
 
+#define CON_BUF_SIZE (CONFIG_BASE_SMALL ? 256 : PAGE_SIZE)
+
 struct vcs_poll_data {
 	struct notifier_block notifier;
 	unsigned int cons_num;
@@ -131,21 +132,45 @@ vcs_poll_data_get(struct file *file)
 	return poll;
 }
 
+/*
+ * Returns VC for inode.
+ * Must be called with console_lock.
+ */
+static struct vc_data*
+vcs_vc(struct inode *inode, int *viewed)
+{
+	unsigned int currcons = iminor(inode) & 127;
+
+	WARN_CONSOLE_UNLOCKED();
+
+	if (currcons == 0) {
+		currcons = fg_console;
+		if (viewed)
+			*viewed = 1;
+	} else {
+		currcons--;
+		if (viewed)
+			*viewed = 0;
+	}
+	return vc_cons[currcons].d;
+}
+
+/*
+ * Returns size for VC carried by inode.
+ * Must be called with console_lock.
+ */
 static int
 vcs_size(struct inode *inode)
 {
 	int size;
 	int minor = iminor(inode);
-	int currcons = minor & 127;
 	struct vc_data *vc;
 
-	if (currcons == 0)
-		currcons = fg_console;
-	else
-		currcons--;
-	if (!vc_cons_allocated(currcons))
+	WARN_CONSOLE_UNLOCKED();
+
+	vc = vcs_vc(inode, NULL);
+	if (!vc)
 		return -ENXIO;
-	vc = vc_cons[currcons].d;
 
 	size = vc->vc_rows * vc->vc_cols;
 
@@ -158,11 +183,13 @@ static loff_t vcs_lseek(struct file *file, loff_t offset, int orig)
 {
 	int size;
 
-	mutex_lock(&con_buf_mtx);
+	console_lock();
 	size = vcs_size(file->f_path.dentry->d_inode);
+	console_unlock();
+	if (size < 0)
+		return size;
 	switch (orig) {
 		default:
-			mutex_unlock(&con_buf_mtx);
 			return -EINVAL;
 		case 2:
 			offset += size;
@@ -173,11 +200,9 @@ static loff_t vcs_lseek(struct file *file, loff_t offset, int orig)
 			break;
 	}
 	if (offset < 0 || offset > size) {
-		mutex_unlock(&con_buf_mtx);
 		return -EINVAL;
 	}
 	file->f_pos = offset;
-	mutex_unlock(&con_buf_mtx);
 	return file->f_pos;
 }
 
@@ -190,12 +215,15 @@ vcs_read(struct file *file, char __user *buf, size_t count, loff_t *ppos)
 	struct vc_data *vc;
 	struct vcs_poll_data *poll;
 	long pos;
-	long viewed, attr, read;
-	int col, maxcol;
+	long attr, read;
+	int col, maxcol, viewed;
 	unsigned short *org = NULL;
 	ssize_t ret;
+	char *con_buf;
 
-	mutex_lock(&con_buf_mtx);
+	con_buf = (char *) __get_free_page(GFP_KERNEL);
+	if (!con_buf)
+		return -ENOMEM;
 
 	pos = *ppos;
 
@@ -205,18 +233,10 @@ vcs_read(struct file *file, char __user *buf, size_t count, loff_t *ppos)
 	console_lock();
 
 	attr = (currcons & 128);
-	currcons = (currcons & 127);
-	if (currcons == 0) {
-		currcons = fg_console;
-		viewed = 1;
-	} else {
-		currcons--;
-		viewed = 0;
-	}
 	ret = -ENXIO;
-	if (!vc_cons_allocated(currcons))
+	vc = vcs_vc(inode, &viewed);
+	if (!vc)
 		goto unlock_out;
-	vc = vc_cons[currcons].d;
 
 	ret = -EINVAL;
 	if (pos < 0)
@@ -237,6 +257,12 @@ vcs_read(struct file *file, char __user *buf, size_t count, loff_t *ppos)
 		 * could sleep.
 		 */
 		size = vcs_size(inode);
+		if (size < 0) {
+			if (read)
+				break;
+			ret = size;
+			goto unlock_out;
+		}
 		if (pos >= size)
 			break;
 		if (count > size - pos)
@@ -355,7 +381,7 @@ vcs_read(struct file *file, char __user *buf, size_t count, loff_t *ppos)
 		ret = read;
 unlock_out:
 	console_unlock();
-	mutex_unlock(&con_buf_mtx);
+	free_page((unsigned long) con_buf);
 	return ret;
 }
 
@@ -366,13 +392,16 @@ vcs_write(struct file *file, const char __user *buf, size_t count, loff_t *ppos)
 	unsigned int currcons = iminor(inode);
 	struct vc_data *vc;
 	long pos;
-	long viewed, attr, size, written;
+	long attr, size, written;
 	char *con_buf0;
-	int col, maxcol;
+	int col, maxcol, viewed;
 	u16 *org0 = NULL, *org = NULL;
 	size_t ret;
+	char *con_buf;
 
-	mutex_lock(&con_buf_mtx);
+	con_buf = (char *) __get_free_page(GFP_KERNEL);
+	if (!con_buf)
+		return -ENOMEM;
 
 	pos = *ppos;
 
@@ -382,19 +411,10 @@ vcs_write(struct file *file, const char __user *buf, size_t count, loff_t *ppos)
 	console_lock();
 
 	attr = (currcons & 128);
-	currcons = (currcons & 127);
-
-	if (currcons == 0) {
-		currcons = fg_console;
-		viewed = 1;
-	} else {
-		currcons--;
-		viewed = 0;
-	}
 	ret = -ENXIO;
-	if (!vc_cons_allocated(currcons))
+	vc = vcs_vc(inode, &viewed);
+	if (!vc)
 		goto unlock_out;
-	vc = vc_cons[currcons].d;
 
 	size = vcs_size(inode);
 	ret = -EINVAL;
@@ -436,6 +456,12 @@ vcs_write(struct file *file, const char __user *buf, size_t count, loff_t *ppos)
 		 * Return data written up to now on failure.
 		 */
 		size = vcs_size(inode);
+		if (size < 0) {
+			if (written)
+				break;
+			ret = size;
+			goto unlock_out;
+		}
 		if (pos >= size)
 			break;
 		if (this_round > size - pos)
@@ -543,9 +569,7 @@ vcs_write(struct file *file, const char __user *buf, size_t count, loff_t *ppos)
 
 unlock_out:
 	console_unlock();
-
-	mutex_unlock(&con_buf_mtx);
-
+	free_page((unsigned long) con_buf);
 	return ret;
 }
 
diff --git a/drivers/tty/vt/vt.c b/drivers/tty/vt/vt.c
index 147ede3423df..798df6f89110 100644
--- a/drivers/tty/vt/vt.c
+++ b/drivers/tty/vt/vt.c
@@ -2068,18 +2068,6 @@ static void do_con_trol(struct tty_struct *tty, struct vc_data *vc, int c)
 	}
 }
 
-/* This is a temporary buffer used to prepare a tty console write
- * so that we can easily avoid touching user space while holding the
- * console spinlock.  It is allocated in con_init and is shared by
- * this code and the vc_screen read/write tty calls.
- *
- * We have to allocate this statically in the kernel data section
- * since console_init (and thus con_init) are called before any
- * kernel memory allocation is available.
- */
-char con_buf[CON_BUF_SIZE];
-DEFINE_MUTEX(con_buf_mtx);
-
 /* is_double_width() is based on the wcwidth() implementation by
  * Markus Kuhn -- 2007-05-26 (Unicode 5.0)
  * Latest version: http://www.cl.cam.ac.uk/~mgk25/ucs/wcwidth.c
@@ -2157,10 +2145,10 @@ static int do_con_write(struct tty_struct *tty, const unsigned char *buf, int co
 
 	currcons = vc->vc_num;
 	if (!vc_cons_allocated(currcons)) {
-	    /* could this happen? */
-		printk_once("con_write: tty %d not allocated\n", currcons+1);
-	    console_unlock();
-	    return 0;
+		/* could this happen? */
+		pr_warn_once("con_write: tty %d not allocated\n", currcons+1);
+		console_unlock();
+		return 0;
 	}
 
 	himask = vc->vc_hi_font_mask;
@@ -2940,7 +2928,7 @@ static int __init con_init(void)
 	gotoxy(vc, vc->vc_x, vc->vc_y);
 	csi_J(vc, 0);
 	update_screen(vc);
-	printk("Console: %s %s %dx%d",
+	pr_info("Console: %s %s %dx%d",
 		vc->vc_can_do_color ? "colour" : "mono",
 		display_desc, vc->vc_cols, vc->vc_rows);
 	printable = 1;
@@ -3103,7 +3091,7 @@ static int bind_con_driver(const struct consw *csw, int first, int last,
 			clear_buffer_attributes(vc);
 	}
 
-	printk("Console: switching ");
+	pr_info("Console: switching ");
 	if (!deflt)
 		printk("consoles %d-%d ", first+1, last+1);
 	if (j >= 0) {
@@ -3809,7 +3797,8 @@ void do_unblank_screen(int leaving_gfx)
 		return;
 	if (!vc_cons_allocated(fg_console)) {
 		/* impossible */
-		printk("unblank_screen: tty %d not allocated ??\n", fg_console+1);
+		pr_warning("unblank_screen: tty %d not allocated ??\n",
+			   fg_console+1);
 		return;
 	}
 	vc = vc_cons[fg_console].d;
diff --git a/drivers/tty/vt/vt_ioctl.c b/drivers/tty/vt/vt_ioctl.c
index 1235ebda6e1c..b64804965316 100644
--- a/drivers/tty/vt/vt_ioctl.c
+++ b/drivers/tty/vt/vt_ioctl.c
@@ -495,7 +495,7 @@ do_unimap_ioctl(int cmd, struct unimapdesc __user *user_ud, int perm, struct vc_
  * We handle the console-specific ioctl's here.  We allow the
  * capability to modify any console, not just the fg_console. 
  */
-int vt_ioctl(struct tty_struct *tty, struct file * file,
+int vt_ioctl(struct tty_struct *tty,
 	     unsigned int cmd, unsigned long arg)
 {
 	struct vc_data *vc = tty->driver_data;
@@ -688,6 +688,9 @@ int vt_ioctl(struct tty_struct *tty, struct file * file,
 			kbd->kbdmode = VC_UNICODE;
 			compute_shiftstate();
 			break;
+		  case K_OFF:
+			kbd->kbdmode = VC_OFF;
+			break;
 		  default:
 			ret = -EINVAL;
 			goto out;
@@ -1007,8 +1010,9 @@ int vt_ioctl(struct tty_struct *tty, struct file * file,
 			if (ret)
 				break;
 			/* Commence switch and lock */
-			set_console(arg);
+			set_console(vsa.console);
 		}
+		break;
 	}
 
 	/*
@@ -1491,7 +1495,7 @@ compat_unimap_ioctl(unsigned int cmd, struct compat_unimapdesc __user *user_ud,
 	return 0;
 }
 
-long vt_compat_ioctl(struct tty_struct *tty, struct file * file,
+long vt_compat_ioctl(struct tty_struct *tty,
 	     unsigned int cmd, unsigned long arg)
 {
 	struct vc_data *vc = tty->driver_data;
@@ -1577,7 +1581,7 @@ out:
 
 fallback:
 	tty_unlock();
-	return vt_ioctl(tty, file, cmd, arg);
+	return vt_ioctl(tty, cmd, arg);
 }
 
 
diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c
index 4ab49d4eebf4..f492a7f2b6ee 100644
--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -776,7 +776,7 @@ static int acm_tty_break_ctl(struct tty_struct *tty, int state)
 	return retval;
 }
 
-static int acm_tty_tiocmget(struct tty_struct *tty, struct file *file)
+static int acm_tty_tiocmget(struct tty_struct *tty)
 {
 	struct acm *acm = tty->driver_data;
 
@@ -791,7 +791,7 @@ static int acm_tty_tiocmget(struct tty_struct *tty, struct file *file)
 	       TIOCM_CTS;
 }
 
-static int acm_tty_tiocmset(struct tty_struct *tty, struct file *file,
+static int acm_tty_tiocmset(struct tty_struct *tty,
 			    unsigned int set, unsigned int clear)
 {
 	struct acm *acm = tty->driver_data;
@@ -813,7 +813,7 @@ static int acm_tty_tiocmset(struct tty_struct *tty, struct file *file,
 	return acm_set_control(acm, acm->ctrlout = newctrl);
 }
 
-static int acm_tty_ioctl(struct tty_struct *tty, struct file *file,
+static int acm_tty_ioctl(struct tty_struct *tty,
 					unsigned int cmd, unsigned long arg)
 {
 	struct acm *acm = tty->driver_data;
diff --git a/drivers/usb/serial/ark3116.c b/drivers/usb/serial/ark3116.c
index 8f1d4fb19d24..5cdb9d912275 100644
--- a/drivers/usb/serial/ark3116.c
+++ b/drivers/usb/serial/ark3116.c
@@ -431,7 +431,7 @@ static int ark3116_get_icount(struct tty_struct *tty,
 	return 0;
 }
 
-static int ark3116_ioctl(struct tty_struct *tty, struct file *file,
+static int ark3116_ioctl(struct tty_struct *tty,
 			 unsigned int cmd, unsigned long arg)
 {
 	struct usb_serial_port *port = tty->driver_data;
@@ -485,7 +485,7 @@ static int ark3116_ioctl(struct tty_struct *tty, struct file *file,
 	return -ENOIOCTLCMD;
 }
 
-static int ark3116_tiocmget(struct tty_struct *tty, struct file *file)
+static int ark3116_tiocmget(struct tty_struct *tty)
 {
 	struct usb_serial_port *port = tty->driver_data;
 	struct ark3116_private *priv = usb_get_serial_port_data(port);
@@ -511,7 +511,7 @@ static int ark3116_tiocmget(struct tty_struct *tty, struct file *file)
 		(ctrl   & UART_MCR_OUT2 ? TIOCM_OUT2 : 0);
 }
 
-static int ark3116_tiocmset(struct tty_struct *tty, struct file *file,
+static int ark3116_tiocmset(struct tty_struct *tty,
 			unsigned set, unsigned clr)
 {
 	struct usb_serial_port *port = tty->driver_data;
diff --git a/drivers/usb/serial/belkin_sa.c b/drivers/usb/serial/belkin_sa.c
index 36df35295db2..d6921fa1403c 100644
--- a/drivers/usb/serial/belkin_sa.c
+++ b/drivers/usb/serial/belkin_sa.c
@@ -100,8 +100,8 @@ static void belkin_sa_process_read_urb(struct urb *urb);
 static void belkin_sa_set_termios(struct tty_struct *tty,
 			struct usb_serial_port *port, struct ktermios * old);
 static void belkin_sa_break_ctl(struct tty_struct *tty, int break_state);
-static int  belkin_sa_tiocmget(struct tty_struct *tty, struct file *file);
-static int  belkin_sa_tiocmset(struct tty_struct *tty, struct file *file,
+static int  belkin_sa_tiocmget(struct tty_struct *tty);
+static int  belkin_sa_tiocmset(struct tty_struct *tty,
 					unsigned int set, unsigned int clear);
 
 
@@ -497,7 +497,7 @@ static void belkin_sa_break_ctl(struct tty_struct *tty, int break_state)
 		dev_err(&port->dev, "Set break_ctl %d\n", break_state);
 }
 
-static int belkin_sa_tiocmget(struct tty_struct *tty, struct file *file)
+static int belkin_sa_tiocmget(struct tty_struct *tty)
 {
 	struct usb_serial_port *port = tty->driver_data;
 	struct belkin_sa_private *priv = usb_get_serial_port_data(port);
@@ -513,7 +513,7 @@ static int belkin_sa_tiocmget(struct tty_struct *tty, struct file *file)
 	return control_state;
 }
 
-static int belkin_sa_tiocmset(struct tty_struct *tty, struct file *file,
+static int belkin_sa_tiocmset(struct tty_struct *tty,
 			       unsigned int set, unsigned int clear)
 {
 	struct usb_serial_port *port = tty->driver_data;
diff --git a/drivers/usb/serial/ch341.c b/drivers/usb/serial/ch341.c
index 14ac87ee9251..6ae1c0688b5e 100644
--- a/drivers/usb/serial/ch341.c
+++ b/drivers/usb/serial/ch341.c
@@ -432,7 +432,7 @@ out:
 	kfree(break_reg);
 }
 
-static int ch341_tiocmset(struct tty_struct *tty, struct file *file,
+static int ch341_tiocmset(struct tty_struct *tty,
 			  unsigned int set, unsigned int clear)
 {
 	struct usb_serial_port *port = tty->driver_data;
@@ -553,8 +553,7 @@ static int wait_modem_info(struct usb_serial_port *port, unsigned int arg)
 	return 0;
 }
 
-/*static int ch341_ioctl(struct usb_serial_port *port, struct file *file,*/
-static int ch341_ioctl(struct tty_struct *tty, struct file *file,
+static int ch341_ioctl(struct tty_struct *tty,
 			unsigned int cmd, unsigned long arg)
 {
 	struct usb_serial_port *port = tty->driver_data;
@@ -573,7 +572,7 @@ static int ch341_ioctl(struct tty_struct *tty, struct file *file,
 	return -ENOIOCTLCMD;
 }
 
-static int ch341_tiocmget(struct tty_struct *tty, struct file *file)
+static int ch341_tiocmget(struct tty_struct *tty)
 {
 	struct usb_serial_port *port = tty->driver_data;
 	struct ch341_private *priv = usb_get_serial_port_data(port);
diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c
index 735ea03157ab..4df3e0cecbae 100644
--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -41,10 +41,9 @@ static void cp210x_get_termios_port(struct usb_serial_port *port,
 	unsigned int *cflagp, unsigned int *baudp);
 static void cp210x_set_termios(struct tty_struct *, struct usb_serial_port *,
 							struct ktermios*);
-static int cp210x_tiocmget(struct tty_struct *, struct file *);
-static int cp210x_tiocmset(struct tty_struct *, struct file *,
-		unsigned int, unsigned int);
-static int cp210x_tiocmset_port(struct usb_serial_port *port, struct file *,
+static int cp210x_tiocmget(struct tty_struct *);
+static int cp210x_tiocmset(struct tty_struct *, unsigned int, unsigned int);
+static int cp210x_tiocmset_port(struct usb_serial_port *port,
 		unsigned int, unsigned int);
 static void cp210x_break_ctl(struct tty_struct *, int);
 static int cp210x_startup(struct usb_serial *);
@@ -698,14 +697,14 @@ static void cp210x_set_termios(struct tty_struct *tty,
 
 }
 
-static int cp210x_tiocmset (struct tty_struct *tty, struct file *file,
+static int cp210x_tiocmset (struct tty_struct *tty,
 		unsigned int set, unsigned int clear)
 {
 	struct usb_serial_port *port = tty->driver_data;
-	return cp210x_tiocmset_port(port, file, set, clear);
+	return cp210x_tiocmset_port(port, set, clear);
 }
 
-static int cp210x_tiocmset_port(struct usb_serial_port *port, struct file *file,
+static int cp210x_tiocmset_port(struct usb_serial_port *port,
 		unsigned int set, unsigned int clear)
 {
 	unsigned int control = 0;
@@ -737,12 +736,12 @@ static int cp210x_tiocmset_port(struct usb_serial_port *port, struct file *file,
 static void cp210x_dtr_rts(struct usb_serial_port *p, int on)
 {
 	if (on)
-		cp210x_tiocmset_port(p, NULL,  TIOCM_DTR|TIOCM_RTS, 0);
+		cp210x_tiocmset_port(p, TIOCM_DTR|TIOCM_RTS, 0);
 	else
-		cp210x_tiocmset_port(p, NULL,  0, TIOCM_DTR|TIOCM_RTS);
+		cp210x_tiocmset_port(p, 0, TIOCM_DTR|TIOCM_RTS);
 }
 
-static int cp210x_tiocmget (struct tty_struct *tty, struct file *file)
+static int cp210x_tiocmget (struct tty_struct *tty)
 {
 	struct usb_serial_port *port = tty->driver_data;
 	unsigned int control;
diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c
index 2edf238b00b9..987e9bf7bd02 100644
--- a/drivers/usb/serial/cypress_m8.c
+++ b/drivers/usb/serial/cypress_m8.c
@@ -169,12 +169,12 @@ static int  cypress_write(struct tty_struct *tty, struct usb_serial_port *port,
 			const unsigned char *buf, int count);
 static void cypress_send(struct usb_serial_port *port);
 static int  cypress_write_room(struct tty_struct *tty);
-static int  cypress_ioctl(struct tty_struct *tty, struct file *file,
+static int  cypress_ioctl(struct tty_struct *tty,
 			unsigned int cmd, unsigned long arg);
 static void cypress_set_termios(struct tty_struct *tty,
 			struct usb_serial_port *port, struct ktermios *old);
-static int  cypress_tiocmget(struct tty_struct *tty, struct file *file);
-static int  cypress_tiocmset(struct tty_struct *tty, struct file *file,
+static int  cypress_tiocmget(struct tty_struct *tty);
+static int  cypress_tiocmset(struct tty_struct *tty,
 			unsigned int set, unsigned int clear);
 static int  cypress_chars_in_buffer(struct tty_struct *tty);
 static void cypress_throttle(struct tty_struct *tty);
@@ -864,7 +864,7 @@ static int cypress_write_room(struct tty_struct *tty)
 }
 
 
-static int cypress_tiocmget(struct tty_struct *tty, struct file *file)
+static int cypress_tiocmget(struct tty_struct *tty)
 {
 	struct usb_serial_port *port = tty->driver_data;
 	struct cypress_private *priv = usb_get_serial_port_data(port);
@@ -892,7 +892,7 @@ static int cypress_tiocmget(struct tty_struct *tty, struct file *file)
 }
 
 
-static int cypress_tiocmset(struct tty_struct *tty, struct file *file,
+static int cypress_tiocmset(struct tty_struct *tty,
 			       unsigned int set, unsigned int clear)
 {
 	struct usb_serial_port *port = tty->driver_data;
@@ -917,7 +917,7 @@ static int cypress_tiocmset(struct tty_struct *tty, struct file *file,
 }
 
 
-static int cypress_ioctl(struct tty_struct *tty, struct file *file,
+static int cypress_ioctl(struct tty_struct *tty,
 					unsigned int cmd, unsigned long arg)
 {
 	struct usb_serial_port *port = tty->driver_data;
diff --git a/drivers/usb/serial/digi_acceleport.c b/drivers/usb/serial/digi_acceleport.c
index 666e5a6edd82..86fbba6336c9 100644
--- a/drivers/usb/serial/digi_acceleport.c
+++ b/drivers/usb/serial/digi_acceleport.c
@@ -445,11 +445,11 @@ static void digi_rx_unthrottle(struct tty_struct *tty);
 static void digi_set_termios(struct tty_struct *tty,
 		struct usb_serial_port *port, struct ktermios *old_termios);
 static void digi_break_ctl(struct tty_struct *tty, int break_state);
-static int digi_tiocmget(struct tty_struct *tty, struct file *file);
-static int digi_tiocmset(struct tty_struct *tty, struct file *file,
-	unsigned int set, unsigned int clear);
+static int digi_tiocmget(struct tty_struct *tty);
+static int digi_tiocmset(struct tty_struct *tty, unsigned int set,
+		unsigned int clear);
 static int digi_write(struct tty_struct *tty, struct usb_serial_port *port,
-	const unsigned char *buf, int count);
+		const unsigned char *buf, int count);
 static void digi_write_bulk_callback(struct urb *urb);
 static int digi_write_room(struct tty_struct *tty);
 static int digi_chars_in_buffer(struct tty_struct *tty);
@@ -1118,7 +1118,7 @@ static void digi_break_ctl(struct tty_struct *tty, int break_state)
 }
 
 
-static int digi_tiocmget(struct tty_struct *tty, struct file *file)
+static int digi_tiocmget(struct tty_struct *tty)
 {
 	struct usb_serial_port *port = tty->driver_data;
 	struct digi_port *priv = usb_get_serial_port_data(port);
@@ -1134,8 +1134,8 @@ static int digi_tiocmget(struct tty_struct *tty, struct file *file)
 }
 
 
-static int digi_tiocmset(struct tty_struct *tty, struct file *file,
-	unsigned int set, unsigned int clear)
+static int digi_tiocmset(struct tty_struct *tty,
+					unsigned int set, unsigned int clear)
 {
 	struct usb_serial_port *port = tty->driver_data;
 	struct digi_port *priv = usb_get_serial_port_data(port);
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index a75f9298d88f..65967b36365f 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -866,10 +866,10 @@ static int ftdi_prepare_write_buffer(struct usb_serial_port *port,
 						void *dest, size_t size);
 static void ftdi_set_termios(struct tty_struct *tty,
 			struct usb_serial_port *port, struct ktermios *old);
-static int  ftdi_tiocmget(struct tty_struct *tty, struct file *file);
-static int  ftdi_tiocmset(struct tty_struct *tty, struct file *file,
+static int  ftdi_tiocmget(struct tty_struct *tty);
+static int  ftdi_tiocmset(struct tty_struct *tty,
 			unsigned int set, unsigned int clear);
-static int  ftdi_ioctl(struct tty_struct *tty, struct file *file,
+static int  ftdi_ioctl(struct tty_struct *tty,
 			unsigned int cmd, unsigned long arg);
 static void ftdi_break_ctl(struct tty_struct *tty, int break_state);
 
@@ -2178,7 +2178,7 @@ static void ftdi_set_termios(struct tty_struct *tty,
 	}
 }
 
-static int ftdi_tiocmget(struct tty_struct *tty, struct file *file)
+static int ftdi_tiocmget(struct tty_struct *tty)
 {
 	struct usb_serial_port *port = tty->driver_data;
 	struct ftdi_private *priv = usb_get_serial_port_data(port);
@@ -2231,7 +2231,7 @@ out:
 	return ret;
 }
 
-static int ftdi_tiocmset(struct tty_struct *tty, struct file *file,
+static int ftdi_tiocmset(struct tty_struct *tty,
 			unsigned int set, unsigned int clear)
 {
 	struct usb_serial_port *port = tty->driver_data;
@@ -2239,7 +2239,7 @@ static int ftdi_tiocmset(struct tty_struct *tty, struct file *file,
 	return update_mctrl(port, set, clear);
 }
 
-static int ftdi_ioctl(struct tty_struct *tty, struct file *file,
+static int ftdi_ioctl(struct tty_struct *tty,
 					unsigned int cmd, unsigned long arg)
 {
 	struct usb_serial_port *port = tty->driver_data;
diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c
index 76e3e502c23d..f1aedfa7c420 100644
--- a/drivers/usb/serial/io_edgeport.c
+++ b/drivers/usb/serial/io_edgeport.c
@@ -216,11 +216,11 @@ static void edge_unthrottle(struct tty_struct *tty);
 static void edge_set_termios(struct tty_struct *tty,
 					struct usb_serial_port *port,
 					struct ktermios *old_termios);
-static int  edge_ioctl(struct tty_struct *tty, struct file *file,
+static int  edge_ioctl(struct tty_struct *tty,
 					unsigned int cmd, unsigned long arg);
 static void edge_break(struct tty_struct *tty, int break_state);
-static int  edge_tiocmget(struct tty_struct *tty, struct file *file);
-static int  edge_tiocmset(struct tty_struct *tty, struct file *file,
+static int  edge_tiocmget(struct tty_struct *tty);
+static int  edge_tiocmset(struct tty_struct *tty,
 					unsigned int set, unsigned int clear);
 static int  edge_get_icount(struct tty_struct *tty,
 				struct serial_icounter_struct *icount);
@@ -1568,7 +1568,7 @@ static int get_lsr_info(struct edgeport_port *edge_port,
 	return 0;
 }
 
-static int edge_tiocmset(struct tty_struct *tty, struct file *file,
+static int edge_tiocmset(struct tty_struct *tty,
 					unsigned int set, unsigned int clear)
 {
 	struct usb_serial_port *port = tty->driver_data;
@@ -1599,7 +1599,7 @@ static int edge_tiocmset(struct tty_struct *tty, struct file *file,
 	return 0;
 }
 
-static int edge_tiocmget(struct tty_struct *tty, struct file *file)
+static int edge_tiocmget(struct tty_struct *tty)
 {
 	struct usb_serial_port *port = tty->driver_data;
 	struct edgeport_port *edge_port = usb_get_serial_port_data(port);
@@ -1679,7 +1679,7 @@ static int get_serial_info(struct edgeport_port *edge_port,
  * SerialIoctl
  *	this function handles any ioctl calls to the driver
  *****************************************************************************/
-static int edge_ioctl(struct tty_struct *tty, struct file *file,
+static int edge_ioctl(struct tty_struct *tty,
 					unsigned int cmd, unsigned long arg)
 {
 	struct usb_serial_port *port = tty->driver_data;
diff --git a/drivers/usb/serial/io_ti.c b/drivers/usb/serial/io_ti.c
index 22506b095c4f..d8434910fa7b 100644
--- a/drivers/usb/serial/io_ti.c
+++ b/drivers/usb/serial/io_ti.c
@@ -2444,7 +2444,7 @@ static void edge_set_termios(struct tty_struct *tty,
 	change_port_settings(tty, edge_port, old_termios);
 }
 
-static int edge_tiocmset(struct tty_struct *tty, struct file *file,
+static int edge_tiocmset(struct tty_struct *tty,
 					unsigned int set, unsigned int clear)
 {
 	struct usb_serial_port *port = tty->driver_data;
@@ -2477,7 +2477,7 @@ static int edge_tiocmset(struct tty_struct *tty, struct file *file,
 	return 0;
 }
 
-static int edge_tiocmget(struct tty_struct *tty, struct file *file)
+static int edge_tiocmget(struct tty_struct *tty)
 {
 	struct usb_serial_port *port = tty->driver_data;
 	struct edgeport_port *edge_port = usb_get_serial_port_data(port);
@@ -2552,7 +2552,7 @@ static int get_serial_info(struct edgeport_port *edge_port,
 	return 0;
 }
 
-static int edge_ioctl(struct tty_struct *tty, struct file *file,
+static int edge_ioctl(struct tty_struct *tty,
 					unsigned int cmd, unsigned long arg)
 {
 	struct usb_serial_port *port = tty->driver_data;
diff --git a/drivers/usb/serial/iuu_phoenix.c b/drivers/usb/serial/iuu_phoenix.c
index 99b97c04896f..6aca631a407a 100644
--- a/drivers/usb/serial/iuu_phoenix.c
+++ b/drivers/usb/serial/iuu_phoenix.c
@@ -150,7 +150,7 @@ static void iuu_release(struct usb_serial *serial)
 	}
 }
 
-static int iuu_tiocmset(struct tty_struct *tty, struct file *file,
+static int iuu_tiocmset(struct tty_struct *tty,
 			unsigned int set, unsigned int clear)
 {
 	struct usb_serial_port *port = tty->driver_data;
@@ -179,7 +179,7 @@ static int iuu_tiocmset(struct tty_struct *tty, struct file *file,
  * When no card , the reader respond with TIOCM_CD
  * This is known as CD autodetect mechanism
  */
-static int iuu_tiocmget(struct tty_struct *tty, struct file *file)
+static int iuu_tiocmget(struct tty_struct *tty)
 {
 	struct usb_serial_port *port = tty->driver_data;
 	struct iuu_private *priv = usb_get_serial_port_data(port);
diff --git a/drivers/usb/serial/keyspan.c b/drivers/usb/serial/keyspan.c
index 67f41b526570..a442352d7b61 100644
--- a/drivers/usb/serial/keyspan.c
+++ b/drivers/usb/serial/keyspan.c
@@ -301,7 +301,7 @@ static void keyspan_set_termios(struct tty_struct *tty,
 	keyspan_send_setup(port, 0);
 }
 
-static int keyspan_tiocmget(struct tty_struct *tty, struct file *file)
+static int keyspan_tiocmget(struct tty_struct *tty)
 {
 	struct usb_serial_port *port = tty->driver_data;
 	struct keyspan_port_private *p_priv = usb_get_serial_port_data(port);
@@ -317,7 +317,7 @@ static int keyspan_tiocmget(struct tty_struct *tty, struct file *file)
 	return value;
 }
 
-static int keyspan_tiocmset(struct tty_struct *tty, struct file *file,
+static int keyspan_tiocmset(struct tty_struct *tty,
 			    unsigned int set, unsigned int clear)
 {
 	struct usb_serial_port *port = tty->driver_data;
diff --git a/drivers/usb/serial/keyspan.h b/drivers/usb/serial/keyspan.h
index ce134dc28ddf..13fa1d1cc900 100644
--- a/drivers/usb/serial/keyspan.h
+++ b/drivers/usb/serial/keyspan.h
@@ -58,10 +58,9 @@ static void keyspan_set_termios		(struct tty_struct *tty,
 					 struct ktermios *old);
 static void keyspan_break_ctl		(struct tty_struct *tty,
 					 int break_state);
-static int  keyspan_tiocmget		(struct tty_struct *tty,
-					 struct file *file);
+static int  keyspan_tiocmget		(struct tty_struct *tty);
 static int  keyspan_tiocmset		(struct tty_struct *tty,
-					 struct file *file, unsigned int set,
+					 unsigned int set,
 					 unsigned int clear);
 static int  keyspan_fake_startup	(struct usb_serial *serial);
 
diff --git a/drivers/usb/serial/keyspan_pda.c b/drivers/usb/serial/keyspan_pda.c
index 7b690f3282a2..d5c0c6ab4966 100644
--- a/drivers/usb/serial/keyspan_pda.c
+++ b/drivers/usb/serial/keyspan_pda.c
@@ -458,7 +458,7 @@ static int keyspan_pda_set_modem_info(struct usb_serial *serial,
 	return rc;
 }
 
-static int keyspan_pda_tiocmget(struct tty_struct *tty, struct file *file)
+static int keyspan_pda_tiocmget(struct tty_struct *tty)
 {
 	struct usb_serial_port *port = tty->driver_data;
 	struct usb_serial *serial = port->serial;
@@ -479,7 +479,7 @@ static int keyspan_pda_tiocmget(struct tty_struct *tty, struct file *file)
 	return value;
 }
 
-static int keyspan_pda_tiocmset(struct tty_struct *tty, struct file *file,
+static int keyspan_pda_tiocmset(struct tty_struct *tty,
 				unsigned int set, unsigned int clear)
 {
 	struct usb_serial_port *port = tty->driver_data;
diff --git a/drivers/usb/serial/kl5kusb105.c b/drivers/usb/serial/kl5kusb105.c
index e8a65ce45a2f..19373cb7c5bf 100644
--- a/drivers/usb/serial/kl5kusb105.c
+++ b/drivers/usb/serial/kl5kusb105.c
@@ -68,8 +68,8 @@ static int  klsi_105_open(struct tty_struct *tty, struct usb_serial_port *port);
 static void klsi_105_close(struct usb_serial_port *port);
 static void klsi_105_set_termios(struct tty_struct *tty,
 			struct usb_serial_port *port, struct ktermios *old);
-static int  klsi_105_tiocmget(struct tty_struct *tty, struct file *file);
-static int  klsi_105_tiocmset(struct tty_struct *tty, struct file *file,
+static int  klsi_105_tiocmget(struct tty_struct *tty);
+static int  klsi_105_tiocmset(struct tty_struct *tty,
 			unsigned int set, unsigned int clear);
 static void klsi_105_process_read_urb(struct urb *urb);
 static int klsi_105_prepare_write_buffer(struct usb_serial_port *port,
@@ -637,7 +637,7 @@ static void mct_u232_break_ctl(struct tty_struct *tty, int break_state)
 }
 #endif
 
-static int klsi_105_tiocmget(struct tty_struct *tty, struct file *file)
+static int klsi_105_tiocmget(struct tty_struct *tty)
 {
 	struct usb_serial_port *port = tty->driver_data;
 	struct klsi_105_private *priv = usb_get_serial_port_data(port);
@@ -661,7 +661,7 @@ static int klsi_105_tiocmget(struct tty_struct *tty, struct file *file)
 	return (int)line_state;
 }
 
-static int klsi_105_tiocmset(struct tty_struct *tty, struct file *file,
+static int klsi_105_tiocmset(struct tty_struct *tty,
 			     unsigned int set, unsigned int clear)
 {
 	int retval = -EINVAL;
diff --git a/drivers/usb/serial/kobil_sct.c b/drivers/usb/serial/kobil_sct.c
index b382d9a0274d..ddd146300ddb 100644
--- a/drivers/usb/serial/kobil_sct.c
+++ b/drivers/usb/serial/kobil_sct.c
@@ -75,10 +75,10 @@ static void kobil_close(struct usb_serial_port *port);
 static int  kobil_write(struct tty_struct *tty, struct usb_serial_port *port,
 			 const unsigned char *buf, int count);
 static int  kobil_write_room(struct tty_struct *tty);
-static int  kobil_ioctl(struct tty_struct *tty, struct file *file,
+static int  kobil_ioctl(struct tty_struct *tty,
 			unsigned int cmd, unsigned long arg);
-static int  kobil_tiocmget(struct tty_struct *tty, struct file *file);
-static int  kobil_tiocmset(struct tty_struct *tty, struct file *file,
+static int  kobil_tiocmget(struct tty_struct *tty);
+static int  kobil_tiocmset(struct tty_struct *tty,
 			   unsigned int set, unsigned int clear);
 static void kobil_read_int_callback(struct urb *urb);
 static void kobil_write_callback(struct urb *purb);
@@ -504,7 +504,7 @@ static int kobil_write_room(struct tty_struct *tty)
 }
 
 
-static int kobil_tiocmget(struct tty_struct *tty, struct file *file)
+static int kobil_tiocmget(struct tty_struct *tty)
 {
 	struct usb_serial_port *port = tty->driver_data;
 	struct kobil_private *priv;
@@ -544,7 +544,7 @@ static int kobil_tiocmget(struct tty_struct *tty, struct file *file)
 	return result;
 }
 
-static int kobil_tiocmset(struct tty_struct *tty, struct file *file,
+static int kobil_tiocmset(struct tty_struct *tty,
 			   unsigned int set, unsigned int clear)
 {
 	struct usb_serial_port *port = tty->driver_data;
@@ -668,7 +668,7 @@ static void kobil_set_termios(struct tty_struct *tty,
 		);
 }
 
-static int kobil_ioctl(struct tty_struct *tty, struct file *file,
+static int kobil_ioctl(struct tty_struct *tty,
 					unsigned int cmd, unsigned long arg)
 {
 	struct usb_serial_port *port = tty->driver_data;
diff --git a/drivers/usb/serial/mct_u232.c b/drivers/usb/serial/mct_u232.c
index 1e225aacf46e..d2c019637e45 100644
--- a/drivers/usb/serial/mct_u232.c
+++ b/drivers/usb/serial/mct_u232.c
@@ -103,8 +103,8 @@ static void mct_u232_read_int_callback(struct urb *urb);
 static void mct_u232_set_termios(struct tty_struct *tty,
 			struct usb_serial_port *port, struct ktermios *old);
 static void mct_u232_break_ctl(struct tty_struct *tty, int break_state);
-static int  mct_u232_tiocmget(struct tty_struct *tty, struct file *file);
-static int  mct_u232_tiocmset(struct tty_struct *tty, struct file *file,
+static int  mct_u232_tiocmget(struct tty_struct *tty);
+static int  mct_u232_tiocmset(struct tty_struct *tty,
 			unsigned int set, unsigned int clear);
 static int  mct_u232_ioctl(struct tty_struct *tty, struct file *file,
 			unsigned int cmd, unsigned long arg);
@@ -790,7 +790,7 @@ static void mct_u232_break_ctl(struct tty_struct *tty, int break_state)
 } /* mct_u232_break_ctl */
 
 
-static int mct_u232_tiocmget(struct tty_struct *tty, struct file *file)
+static int mct_u232_tiocmget(struct tty_struct *tty)
 {
 	struct usb_serial_port *port = tty->driver_data;
 	struct mct_u232_private *priv = usb_get_serial_port_data(port);
@@ -806,7 +806,7 @@ static int mct_u232_tiocmget(struct tty_struct *tty, struct file *file)
 	return control_state;
 }
 
-static int mct_u232_tiocmset(struct tty_struct *tty, struct file *file,
+static int mct_u232_tiocmset(struct tty_struct *tty,
 			      unsigned int set, unsigned int clear)
 {
 	struct usb_serial_port *port = tty->driver_data;
diff --git a/drivers/usb/serial/mos7720.c b/drivers/usb/serial/mos7720.c
index ae506f4ee29d..40abedbc5943 100644
--- a/drivers/usb/serial/mos7720.c
+++ b/drivers/usb/serial/mos7720.c
@@ -1833,7 +1833,7 @@ static int get_lsr_info(struct tty_struct *tty,
 	return 0;
 }
 
-static int mos7720_tiocmget(struct tty_struct *tty, struct file *file)
+static int mos7720_tiocmget(struct tty_struct *tty)
 {
 	struct usb_serial_port *port = tty->driver_data;
 	struct moschip_port *mos7720_port = usb_get_serial_port_data(port);
@@ -1858,14 +1858,14 @@ static int mos7720_tiocmget(struct tty_struct *tty, struct file *file)
 	return result;
 }
 
-static int mos7720_tiocmset(struct tty_struct *tty, struct file *file,
+static int mos7720_tiocmset(struct tty_struct *tty,
 			    unsigned int set, unsigned int clear)
 {
 	struct usb_serial_port *port = tty->driver_data;
 	struct moschip_port *mos7720_port = usb_get_serial_port_data(port);
 	unsigned int mcr ;
 	dbg("%s - port %d", __func__, port->number);
-	dbg("he was at tiocmget");
+	dbg("he was at tiocmset");
 
 	mcr = mos7720_port->shadowMCR;
 
@@ -1987,7 +1987,7 @@ static int get_serial_info(struct moschip_port *mos7720_port,
 	return 0;
 }
 
-static int mos7720_ioctl(struct tty_struct *tty, struct file *file,
+static int mos7720_ioctl(struct tty_struct *tty,
 			 unsigned int cmd, unsigned long arg)
 {
 	struct usb_serial_port *port = tty->driver_data;
diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c
index 5627993f9e41..7b50aa122752 100644
--- a/drivers/usb/serial/mos7840.c
+++ b/drivers/usb/serial/mos7840.c
@@ -1644,7 +1644,7 @@ static void mos7840_unthrottle(struct tty_struct *tty)
 	}
 }
 
-static int mos7840_tiocmget(struct tty_struct *tty, struct file *file)
+static int mos7840_tiocmget(struct tty_struct *tty)
 {
 	struct usb_serial_port *port = tty->driver_data;
 	struct moschip_port *mos7840_port;
@@ -1674,7 +1674,7 @@ static int mos7840_tiocmget(struct tty_struct *tty, struct file *file)
 	return result;
 }
 
-static int mos7840_tiocmset(struct tty_struct *tty, struct file *file,
+static int mos7840_tiocmset(struct tty_struct *tty,
 			    unsigned int set, unsigned int clear)
 {
 	struct usb_serial_port *port = tty->driver_data;
@@ -2235,7 +2235,7 @@ static int mos7840_get_icount(struct tty_struct *tty,
  *	this function handles any ioctl calls to the driver
  *****************************************************************************/
 
-static int mos7840_ioctl(struct tty_struct *tty, struct file *file,
+static int mos7840_ioctl(struct tty_struct *tty,
 			 unsigned int cmd, unsigned long arg)
 {
 	struct usb_serial_port *port = tty->driver_data;
diff --git a/drivers/usb/serial/opticon.c b/drivers/usb/serial/opticon.c
index ce82396fc4e8..201f6096844b 100644
--- a/drivers/usb/serial/opticon.c
+++ b/drivers/usb/serial/opticon.c
@@ -391,7 +391,7 @@ static void opticon_unthrottle(struct tty_struct *tty)
 	}
 }
 
-static int opticon_tiocmget(struct tty_struct *tty, struct file *file)
+static int opticon_tiocmget(struct tty_struct *tty)
 {
 	struct usb_serial_port *port = tty->driver_data;
 	struct opticon_private *priv = usb_get_serial_data(port->serial);
@@ -468,7 +468,7 @@ static int get_serial_info(struct opticon_private *priv,
 	return 0;
 }
 
-static int opticon_ioctl(struct tty_struct *tty, struct file *file,
+static int opticon_ioctl(struct tty_struct *tty,
 			 unsigned int cmd, unsigned long arg)
 {
 	struct usb_serial_port *port = tty->driver_data;
diff --git a/drivers/usb/serial/oti6858.c b/drivers/usb/serial/oti6858.c
index 73613205be7a..4c29e6c2bda7 100644
--- a/drivers/usb/serial/oti6858.c
+++ b/drivers/usb/serial/oti6858.c
@@ -135,7 +135,7 @@ static void oti6858_close(struct usb_serial_port *port);
 static void oti6858_set_termios(struct tty_struct *tty,
 			struct usb_serial_port *port, struct ktermios *old);
 static void oti6858_init_termios(struct tty_struct *tty);
-static int oti6858_ioctl(struct tty_struct *tty, struct file *file,
+static int oti6858_ioctl(struct tty_struct *tty,
 			unsigned int cmd, unsigned long arg);
 static void oti6858_read_int_callback(struct urb *urb);
 static void oti6858_read_bulk_callback(struct urb *urb);
@@ -144,8 +144,8 @@ static int oti6858_write(struct tty_struct *tty, struct usb_serial_port *port,
 			const unsigned char *buf, int count);
 static int oti6858_write_room(struct tty_struct *tty);
 static int oti6858_chars_in_buffer(struct tty_struct *tty);
-static int oti6858_tiocmget(struct tty_struct *tty, struct file *file);
-static int oti6858_tiocmset(struct tty_struct *tty, struct file *file,
+static int oti6858_tiocmget(struct tty_struct *tty);
+static int oti6858_tiocmset(struct tty_struct *tty,
 				unsigned int set, unsigned int clear);
 static int oti6858_startup(struct usb_serial *serial);
 static void oti6858_release(struct usb_serial *serial);
@@ -624,7 +624,7 @@ static void oti6858_close(struct usb_serial_port *port)
 	usb_kill_urb(port->interrupt_in_urb);
 }
 
-static int oti6858_tiocmset(struct tty_struct *tty, struct file *file,
+static int oti6858_tiocmset(struct tty_struct *tty,
 				unsigned int set, unsigned int clear)
 {
 	struct usb_serial_port *port = tty->driver_data;
@@ -657,7 +657,7 @@ static int oti6858_tiocmset(struct tty_struct *tty, struct file *file,
 	return 0;
 }
 
-static int oti6858_tiocmget(struct tty_struct *tty, struct file *file)
+static int oti6858_tiocmget(struct tty_struct *tty)
 {
 	struct usb_serial_port *port = tty->driver_data;
 	struct oti6858_private *priv = usb_get_serial_port_data(port);
@@ -728,7 +728,7 @@ static int wait_modem_info(struct usb_serial_port *port, unsigned int arg)
 	return 0;
 }
 
-static int oti6858_ioctl(struct tty_struct *tty, struct file *file,
+static int oti6858_ioctl(struct tty_struct *tty,
 			unsigned int cmd, unsigned long arg)
 {
 	struct usb_serial_port *port = tty->driver_data;
diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c
index 08c9181b8e48..30461fcc2206 100644
--- a/drivers/usb/serial/pl2303.c
+++ b/drivers/usb/serial/pl2303.c
@@ -505,7 +505,7 @@ static int pl2303_open(struct tty_struct *tty, struct usb_serial_port *port)
 	return 0;
 }
 
-static int pl2303_tiocmset(struct tty_struct *tty, struct file *file,
+static int pl2303_tiocmset(struct tty_struct *tty,
 			   unsigned int set, unsigned int clear)
 {
 	struct usb_serial_port *port = tty->driver_data;
@@ -531,7 +531,7 @@ static int pl2303_tiocmset(struct tty_struct *tty, struct file *file,
 	return set_control_lines(port->serial->dev, control);
 }
 
-static int pl2303_tiocmget(struct tty_struct *tty, struct file *file)
+static int pl2303_tiocmget(struct tty_struct *tty)
 {
 	struct usb_serial_port *port = tty->driver_data;
 	struct pl2303_private *priv = usb_get_serial_port_data(port);
@@ -606,7 +606,7 @@ static int wait_modem_info(struct usb_serial_port *port, unsigned int arg)
 	return 0;
 }
 
-static int pl2303_ioctl(struct tty_struct *tty, struct file *file,
+static int pl2303_ioctl(struct tty_struct *tty,
 			unsigned int cmd, unsigned long arg)
 {
 	struct serial_struct ser;
diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c
index 5b88b6836a81..d5d136a53b61 100644
--- a/drivers/usb/serial/sierra.c
+++ b/drivers/usb/serial/sierra.c
@@ -395,7 +395,7 @@ static void sierra_set_termios(struct tty_struct *tty,
 	sierra_send_setup(port);
 }
 
-static int sierra_tiocmget(struct tty_struct *tty, struct file *file)
+static int sierra_tiocmget(struct tty_struct *tty)
 {
 	struct usb_serial_port *port = tty->driver_data;
 	unsigned int value;
@@ -414,7 +414,7 @@ static int sierra_tiocmget(struct tty_struct *tty, struct file *file)
 	return value;
 }
 
-static int sierra_tiocmset(struct tty_struct *tty, struct file *file,
+static int sierra_tiocmset(struct tty_struct *tty,
 			unsigned int set, unsigned int clear)
 {
 	struct usb_serial_port *port = tty->driver_data;
diff --git a/drivers/usb/serial/spcp8x5.c b/drivers/usb/serial/spcp8x5.c
index cbfb70bffdd0..180ea6c7911c 100644
--- a/drivers/usb/serial/spcp8x5.c
+++ b/drivers/usb/serial/spcp8x5.c
@@ -576,7 +576,7 @@ static int spcp8x5_wait_modem_info(struct usb_serial_port *port,
 	return 0;
 }
 
-static int spcp8x5_ioctl(struct tty_struct *tty, struct file *file,
+static int spcp8x5_ioctl(struct tty_struct *tty,
 			 unsigned int cmd, unsigned long arg)
 {
 	struct usb_serial_port *port = tty->driver_data;
@@ -595,7 +595,7 @@ static int spcp8x5_ioctl(struct tty_struct *tty, struct file *file,
 	return -ENOIOCTLCMD;
 }
 
-static int spcp8x5_tiocmset(struct tty_struct *tty, struct file *file,
+static int spcp8x5_tiocmset(struct tty_struct *tty,
 			    unsigned int set, unsigned int clear)
 {
 	struct usb_serial_port *port = tty->driver_data;
@@ -618,7 +618,7 @@ static int spcp8x5_tiocmset(struct tty_struct *tty, struct file *file,
 	return spcp8x5_set_ctrlLine(port->serial->dev, control , priv->type);
 }
 
-static int spcp8x5_tiocmget(struct tty_struct *tty, struct file *file)
+static int spcp8x5_tiocmget(struct tty_struct *tty)
 {
 	struct usb_serial_port *port = tty->driver_data;
 	struct spcp8x5_private *priv = usb_get_serial_port_data(port);
diff --git a/drivers/usb/serial/ssu100.c b/drivers/usb/serial/ssu100.c
index 8359ec798959..87362e48796e 100644
--- a/drivers/usb/serial/ssu100.c
+++ b/drivers/usb/serial/ssu100.c
@@ -439,7 +439,7 @@ static int ssu100_get_icount(struct tty_struct *tty,
 
 
 
-static int ssu100_ioctl(struct tty_struct *tty, struct file *file,
+static int ssu100_ioctl(struct tty_struct *tty,
 		    unsigned int cmd, unsigned long arg)
 {
 	struct usb_serial_port *port = tty->driver_data;
@@ -484,7 +484,7 @@ static int ssu100_attach(struct usb_serial *serial)
 	return ssu100_initdevice(serial->dev);
 }
 
-static int ssu100_tiocmget(struct tty_struct *tty, struct file *file)
+static int ssu100_tiocmget(struct tty_struct *tty)
 {
 	struct usb_serial_port *port = tty->driver_data;
 	struct usb_device *dev = port->serial->dev;
@@ -517,7 +517,7 @@ mget_out:
 	return r;
 }
 
-static int ssu100_tiocmset(struct tty_struct *tty, struct file *file,
+static int ssu100_tiocmset(struct tty_struct *tty,
 			   unsigned int set, unsigned int clear)
 {
 	struct usb_serial_port *port = tty->driver_data;
diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c
index a910004f4079..c6d92a530086 100644
--- a/drivers/usb/serial/ti_usb_3410_5052.c
+++ b/drivers/usb/serial/ti_usb_3410_5052.c
@@ -106,14 +106,14 @@ static int ti_write_room(struct tty_struct *tty);
 static int ti_chars_in_buffer(struct tty_struct *tty);
 static void ti_throttle(struct tty_struct *tty);
 static void ti_unthrottle(struct tty_struct *tty);
-static int ti_ioctl(struct tty_struct *tty, struct file *file,
+static int ti_ioctl(struct tty_struct *tty,
 		unsigned int cmd, unsigned long arg);
 static int ti_get_icount(struct tty_struct *tty,
 		struct serial_icounter_struct *icount);
 static void ti_set_termios(struct tty_struct *tty,
 		struct usb_serial_port *port, struct ktermios *old_termios);
-static int ti_tiocmget(struct tty_struct *tty, struct file *file);
-static int ti_tiocmset(struct tty_struct *tty, struct file *file,
+static int ti_tiocmget(struct tty_struct *tty);
+static int ti_tiocmset(struct tty_struct *tty,
 		unsigned int set, unsigned int clear);
 static void ti_break(struct tty_struct *tty, int break_state);
 static void ti_interrupt_callback(struct urb *urb);
@@ -818,7 +818,7 @@ static int ti_get_icount(struct tty_struct *tty,
 	return 0;
 }
 
-static int ti_ioctl(struct tty_struct *tty, struct file *file,
+static int ti_ioctl(struct tty_struct *tty,
 	unsigned int cmd, unsigned long arg)
 {
 	struct usb_serial_port *port = tty->driver_data;
@@ -1000,7 +1000,7 @@ static void ti_set_termios(struct tty_struct *tty,
 }
 
 
-static int ti_tiocmget(struct tty_struct *tty, struct file *file)
+static int ti_tiocmget(struct tty_struct *tty)
 {
 	struct usb_serial_port *port = tty->driver_data;
 	struct ti_port *tport = usb_get_serial_port_data(port);
@@ -1033,8 +1033,8 @@ static int ti_tiocmget(struct tty_struct *tty, struct file *file)
 }
 
 
-static int ti_tiocmset(struct tty_struct *tty, struct file *file,
-	unsigned int set, unsigned int clear)
+static int ti_tiocmset(struct tty_struct *tty,
+				unsigned int set, unsigned int clear)
 {
 	struct usb_serial_port *port = tty->driver_data;
 	struct ti_port *tport = usb_get_serial_port_data(port);
diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c
index 2ff90a9c8f47..1c031309ab25 100644
--- a/drivers/usb/serial/usb-serial.c
+++ b/drivers/usb/serial/usb-serial.c
@@ -406,7 +406,7 @@ static void serial_unthrottle(struct tty_struct *tty)
 		port->serial->type->unthrottle(tty);
 }
 
-static int serial_ioctl(struct tty_struct *tty, struct file *file,
+static int serial_ioctl(struct tty_struct *tty,
 					unsigned int cmd, unsigned long arg)
 {
 	struct usb_serial_port *port = tty->driver_data;
@@ -417,7 +417,7 @@ static int serial_ioctl(struct tty_struct *tty, struct file *file,
 	/* pass on to the driver specific version of this function
 	   if it is available */
 	if (port->serial->type->ioctl) {
-		retval = port->serial->type->ioctl(tty, file, cmd, arg);
+		retval = port->serial->type->ioctl(tty, cmd, arg);
 	} else
 		retval = -ENOIOCTLCMD;
 	return retval;
@@ -496,18 +496,18 @@ static const struct file_operations serial_proc_fops = {
 	.release	= single_release,
 };
 
-static int serial_tiocmget(struct tty_struct *tty, struct file *file)
+static int serial_tiocmget(struct tty_struct *tty)
 {
 	struct usb_serial_port *port = tty->driver_data;
 
 	dbg("%s - port %d", __func__, port->number);
 
 	if (port->serial->type->tiocmget)
-		return port->serial->type->tiocmget(tty, file);
+		return port->serial->type->tiocmget(tty);
 	return -EINVAL;
 }
 
-static int serial_tiocmset(struct tty_struct *tty, struct file *file,
+static int serial_tiocmset(struct tty_struct *tty,
 			    unsigned int set, unsigned int clear)
 {
 	struct usb_serial_port *port = tty->driver_data;
@@ -515,7 +515,7 @@ static int serial_tiocmset(struct tty_struct *tty, struct file *file,
 	dbg("%s - port %d", __func__, port->number);
 
 	if (port->serial->type->tiocmset)
-		return port->serial->type->tiocmset(tty, file, set, clear);
+		return port->serial->type->tiocmset(tty, set, clear);
 	return -EINVAL;
 }
 
diff --git a/drivers/usb/serial/usb-wwan.h b/drivers/usb/serial/usb-wwan.h
index 3ab77c5d9819..c47b6ec03063 100644
--- a/drivers/usb/serial/usb-wwan.h
+++ b/drivers/usb/serial/usb-wwan.h
@@ -15,10 +15,10 @@ extern int usb_wwan_write_room(struct tty_struct *tty);
 extern void usb_wwan_set_termios(struct tty_struct *tty,
 				 struct usb_serial_port *port,
 				 struct ktermios *old);
-extern int usb_wwan_tiocmget(struct tty_struct *tty, struct file *file);
-extern int usb_wwan_tiocmset(struct tty_struct *tty, struct file *file,
+extern int usb_wwan_tiocmget(struct tty_struct *tty);
+extern int usb_wwan_tiocmset(struct tty_struct *tty,
 			     unsigned int set, unsigned int clear);
-extern int usb_wwan_ioctl(struct tty_struct *tty, struct file *file,
+extern int usb_wwan_ioctl(struct tty_struct *tty,
 			  unsigned int cmd, unsigned long arg);
 extern int usb_wwan_send_setup(struct usb_serial_port *port);
 extern int usb_wwan_write(struct tty_struct *tty, struct usb_serial_port *port,
diff --git a/drivers/usb/serial/usb_wwan.c b/drivers/usb/serial/usb_wwan.c
index eb95aecc0015..a65ddd543869 100644
--- a/drivers/usb/serial/usb_wwan.c
+++ b/drivers/usb/serial/usb_wwan.c
@@ -79,7 +79,7 @@ void usb_wwan_set_termios(struct tty_struct *tty,
 }
 EXPORT_SYMBOL(usb_wwan_set_termios);
 
-int usb_wwan_tiocmget(struct tty_struct *tty, struct file *file)
+int usb_wwan_tiocmget(struct tty_struct *tty)
 {
 	struct usb_serial_port *port = tty->driver_data;
 	unsigned int value;
@@ -98,7 +98,7 @@ int usb_wwan_tiocmget(struct tty_struct *tty, struct file *file)
 }
 EXPORT_SYMBOL(usb_wwan_tiocmget);
 
-int usb_wwan_tiocmset(struct tty_struct *tty, struct file *file,
+int usb_wwan_tiocmset(struct tty_struct *tty,
 		      unsigned int set, unsigned int clear)
 {
 	struct usb_serial_port *port = tty->driver_data;
@@ -178,7 +178,7 @@ static int set_serial_info(struct usb_serial_port *port,
 	return retval;
 }
 
-int usb_wwan_ioctl(struct tty_struct *tty, struct file *file,
+int usb_wwan_ioctl(struct tty_struct *tty,
 		   unsigned int cmd, unsigned long arg)
 {
 	struct usb_serial_port *port = tty->driver_data;
diff --git a/drivers/usb/serial/whiteheat.c b/drivers/usb/serial/whiteheat.c
index 3f9ac88d588c..5b073bcc807b 100644
--- a/drivers/usb/serial/whiteheat.c
+++ b/drivers/usb/serial/whiteheat.c
@@ -152,12 +152,12 @@ static int  whiteheat_write(struct tty_struct *tty,
 			struct usb_serial_port *port,
 			const unsigned char *buf, int count);
 static int  whiteheat_write_room(struct tty_struct *tty);
-static int  whiteheat_ioctl(struct tty_struct *tty, struct file *file,
+static int  whiteheat_ioctl(struct tty_struct *tty,
 			unsigned int cmd, unsigned long arg);
 static void whiteheat_set_termios(struct tty_struct *tty,
 			struct usb_serial_port *port, struct ktermios *old);
-static int  whiteheat_tiocmget(struct tty_struct *tty, struct file *file);
-static int  whiteheat_tiocmset(struct tty_struct *tty, struct file *file,
+static int  whiteheat_tiocmget(struct tty_struct *tty);
+static int  whiteheat_tiocmset(struct tty_struct *tty,
 			unsigned int set, unsigned int clear);
 static void whiteheat_break_ctl(struct tty_struct *tty, int break_state);
 static int  whiteheat_chars_in_buffer(struct tty_struct *tty);
@@ -833,7 +833,7 @@ static int whiteheat_write_room(struct tty_struct *tty)
 	return (room);
 }
 
-static int whiteheat_tiocmget(struct tty_struct *tty, struct file *file)
+static int whiteheat_tiocmget(struct tty_struct *tty)
 {
 	struct usb_serial_port *port = tty->driver_data;
 	struct whiteheat_private *info = usb_get_serial_port_data(port);
@@ -850,7 +850,7 @@ static int whiteheat_tiocmget(struct tty_struct *tty, struct file *file)
 	return modem_signals;
 }
 
-static int whiteheat_tiocmset(struct tty_struct *tty, struct file *file,
+static int whiteheat_tiocmset(struct tty_struct *tty,
 			       unsigned int set, unsigned int clear)
 {
 	struct usb_serial_port *port = tty->driver_data;
@@ -874,7 +874,7 @@ static int whiteheat_tiocmset(struct tty_struct *tty, struct file *file,
 }
 
 
-static int whiteheat_ioctl(struct tty_struct *tty, struct file *file,
+static int whiteheat_ioctl(struct tty_struct *tty,
 					unsigned int cmd, unsigned long arg)
 {
 	struct usb_serial_port *port = tty->driver_data;