summaryrefslogtreecommitdiff
path: root/drivers
diff options
context:
space:
mode:
Diffstat (limited to 'drivers')
-rw-r--r--drivers/ata/libata-core.c4
-rw-r--r--drivers/base/bus.c2
-rw-r--r--drivers/bluetooth/Kconfig3
-rw-r--r--drivers/gpu/drm/drm_crtc_helper.c2
-rw-r--r--drivers/input/sparse-keymap.c2
-rw-r--r--drivers/misc/mic/Kconfig2
-rw-r--r--drivers/mmc/core/host.c2
-rw-r--r--drivers/net/ethernet/intel/ixgbe/ixgbe_fcoe.c2
-rw-r--r--drivers/regulator/core.c2
-rw-r--r--drivers/scsi/scsi_transport_iscsi.c6
-rw-r--r--drivers/staging/android/Kconfig2
-rw-r--r--drivers/staging/bcm/Kconfig1
-rw-r--r--drivers/staging/frontier/Kconfig1
-rw-r--r--drivers/staging/media/go7007/Kconfig3
-rw-r--r--drivers/staging/rtl8187se/Kconfig1
-rw-r--r--drivers/staging/rtl8188eu/Kconfig1
-rw-r--r--drivers/staging/rtl8192e/rtl8192e/Kconfig1
-rw-r--r--drivers/staging/rtl8192u/Kconfig1
-rw-r--r--drivers/staging/rtl8712/Kconfig2
-rw-r--r--drivers/staging/usbip/Kconfig4
-rw-r--r--drivers/usb/core/Kconfig1
-rw-r--r--drivers/usb/core/message.c2
-rw-r--r--drivers/usb/core/urb.c2
-rw-r--r--drivers/usb/host/Kconfig3
24 files changed, 15 insertions, 37 deletions
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 34406f7fdd7a..c19734d96d7e 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -1524,7 +1524,7 @@ static void ata_qc_complete_internal(struct ata_queued_cmd *qc)
* @dev: Device to which the command is sent
* @tf: Taskfile registers for the command and the result
* @cdb: CDB for packet command
- * @dma_dir: Data tranfer direction of the command
+ * @dma_dir: Data transfer direction of the command
* @sgl: sg list for the data buffer of the command
* @n_elem: Number of sg entries
* @timeout: Timeout in msecs (0 for default)
@@ -1712,7 +1712,7 @@ unsigned ata_exec_internal_sg(struct ata_device *dev,
* @dev: Device to which the command is sent
* @tf: Taskfile registers for the command and the result
* @cdb: CDB for packet command
- * @dma_dir: Data tranfer direction of the command
+ * @dma_dir: Data transfer direction of the command
* @buf: Data buffer of the command
* @buflen: Length of data buffer
* @timeout: Timeout in msecs (0 for default)
diff --git a/drivers/base/bus.c b/drivers/base/bus.c
index 59dc8086e4fa..83e910a57563 100644
--- a/drivers/base/bus.c
+++ b/drivers/base/bus.c
@@ -1218,7 +1218,7 @@ err_dev:
* with the name of the subsystem. The root device can carry subsystem-
* wide attributes. All registered devices are below this single root
* device and are named after the subsystem with a simple enumeration
- * number appended. The registered devices are not explicitely named;
+ * number appended. The registered devices are not explicitly named;
* only 'id' in the device needs to be set.
*
* Do not use this interface for anything new, it exists for compatibility
diff --git a/drivers/bluetooth/Kconfig b/drivers/bluetooth/Kconfig
index 11a6104a1e4f..f5ce64e03fd7 100644
--- a/drivers/bluetooth/Kconfig
+++ b/drivers/bluetooth/Kconfig
@@ -241,5 +241,6 @@ config BT_WILINK
core driver to communicate with the BT core of the combo chip.
Say Y here to compile support for Texas Instrument's WiLink7 driver
- into the kernel or say M to compile it as module.
+ into the kernel or say M to compile it as module (btwilink).
+
endmenu
diff --git a/drivers/gpu/drm/drm_crtc_helper.c b/drivers/gpu/drm/drm_crtc_helper.c
index ea92b827e787..f7a81209beb3 100644
--- a/drivers/gpu/drm/drm_crtc_helper.c
+++ b/drivers/gpu/drm/drm_crtc_helper.c
@@ -564,7 +564,7 @@ drm_crtc_helper_disable(struct drm_crtc *crtc)
* Caller must hold mode config lock.
*
* Setup a new configuration, provided by the upper layers (either an ioctl call
- * from userspace or internally e.g. from the fbdev suppport code) in @set, and
+ * from userspace or internally e.g. from the fbdev support code) in @set, and
* enable it. This is the main helper functions for drivers that implement
* kernel mode setting with the crtc helper functions and the assorted
* ->prepare(), ->modeset() and ->commit() helper callbacks.
diff --git a/drivers/input/sparse-keymap.c b/drivers/input/sparse-keymap.c
index a70aa555bbff..e7409c45bdd0 100644
--- a/drivers/input/sparse-keymap.c
+++ b/drivers/input/sparse-keymap.c
@@ -236,7 +236,7 @@ EXPORT_SYMBOL(sparse_keymap_setup);
* in an input device that was set up by sparse_keymap_setup().
* NOTE: It is safe to cal this function while input device is
* still registered (however the drivers should care not to try to
- * use freed keymap and thus have to shut off interrups/polling
+ * use freed keymap and thus have to shut off interrupts/polling
* before freeing the keymap).
*/
void sparse_keymap_free(struct input_dev *dev)
diff --git a/drivers/misc/mic/Kconfig b/drivers/misc/mic/Kconfig
index e42b331edbc6..462a5b1d8651 100644
--- a/drivers/misc/mic/Kconfig
+++ b/drivers/misc/mic/Kconfig
@@ -4,7 +4,6 @@ config INTEL_MIC_HOST
tristate "Intel MIC Host Driver"
depends on 64BIT && PCI && X86
select VHOST_RING
- default N
help
This enables Host Driver support for the Intel Many Integrated
Core (MIC) family of PCIe form factor coprocessor devices that
@@ -25,7 +24,6 @@ config INTEL_MIC_CARD
tristate "Intel MIC Card Driver"
depends on 64BIT && X86
select VIRTIO
- default N
help
This enables card driver support for the Intel Many Integrated
Core (MIC) device family. The card driver communicates shutdown/
diff --git a/drivers/mmc/core/host.c b/drivers/mmc/core/host.c
index 49bc403e31f0..114f6bdfbef3 100644
--- a/drivers/mmc/core/host.c
+++ b/drivers/mmc/core/host.c
@@ -337,7 +337,7 @@ int mmc_of_parse(struct mmc_host *host)
break;
default:
dev_err(host->parent,
- "Invalid \"bus-width\" value %ud!\n", bus_width);
+ "Invalid \"bus-width\" value %u!\n", bus_width);
return -EINVAL;
}
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_fcoe.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_fcoe.c
index f58db453a97e..08726177a3eb 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_fcoe.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_fcoe.c
@@ -585,7 +585,7 @@ static int ixgbe_fcoe_dma_pool_alloc(struct ixgbe_fcoe *fcoe,
struct dma_pool *pool;
char pool_name[32];
- snprintf(pool_name, 32, "ixgbe_fcoe_ddp_%d", cpu);
+ snprintf(pool_name, 32, "ixgbe_fcoe_ddp_%u", cpu);
pool = dma_pool_create(pool_name, dev, IXGBE_FCPTR_MAX,
IXGBE_FCPTR_ALIGN, PAGE_SIZE);
diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c
index bac485acc7f3..9a09f3cdbabb 100644
--- a/drivers/regulator/core.c
+++ b/drivers/regulator/core.c
@@ -2138,7 +2138,7 @@ EXPORT_SYMBOL_GPL(regulator_is_enabled);
* @regulator: regulator source
*
* Returns positive if the regulator driver backing the source/client
- * can change its voltage, false otherwise. Usefull for detecting fixed
+ * can change its voltage, false otherwise. Useful for detecting fixed
* or dummy regulators and disabling voltage change logic in the client
* driver.
*/
diff --git a/drivers/scsi/scsi_transport_iscsi.c b/drivers/scsi/scsi_transport_iscsi.c
index fd8ffe6bcfdd..0102a2d70dd8 100644
--- a/drivers/scsi/scsi_transport_iscsi.c
+++ b/drivers/scsi/scsi_transport_iscsi.c
@@ -1225,7 +1225,7 @@ struct bus_type iscsi_flashnode_bus = {
* Adds a sysfs entry for the flashnode session attributes
*
* Returns:
- * pointer to allocated flashnode sess on sucess
+ * pointer to allocated flashnode sess on success
* %NULL on failure
*/
struct iscsi_bus_flash_session *
@@ -1423,7 +1423,7 @@ static int iscsi_iter_destroy_flashnode_conn_fn(struct device *dev, void *data)
}
/**
- * iscsi_destroy_flashnode_sess - destory flashnode session entry
+ * iscsi_destroy_flashnode_sess - destroy flashnode session entry
* @fnode_sess: pointer to flashnode session entry to be destroyed
*
* Deletes the flashnode session entry and all children flashnode connection
@@ -1453,7 +1453,7 @@ static int iscsi_iter_destroy_flashnode_fn(struct device *dev, void *data)
}
/**
- * iscsi_destroy_all_flashnode - destory all flashnode session entries
+ * iscsi_destroy_all_flashnode - destroy all flashnode session entries
* @shost: pointer to host data
*
* Destroys all the flashnode session entries and all corresponding children
diff --git a/drivers/staging/android/Kconfig b/drivers/staging/android/Kconfig
index ab28d2b5e308..99e484f845f2 100644
--- a/drivers/staging/android/Kconfig
+++ b/drivers/staging/android/Kconfig
@@ -2,7 +2,6 @@ menu "Android"
config ANDROID
bool "Android Drivers"
- default N
---help---
Enable support for various drivers needed on the Android platform
@@ -73,7 +72,6 @@ config ANDROID_TIMED_GPIO
config ANDROID_LOW_MEMORY_KILLER
bool "Android Low Memory Killer"
- default N
---help---
Registers processes to be killed when memory is low
diff --git a/drivers/staging/bcm/Kconfig b/drivers/staging/bcm/Kconfig
index 83c9752504d4..8acf4b24a7c9 100644
--- a/drivers/staging/bcm/Kconfig
+++ b/drivers/staging/bcm/Kconfig
@@ -1,7 +1,6 @@
config BCM_WIMAX
tristate "Beceem BCS200/BCS220-3 and BCSM250 wimax support"
depends on USB && NET
- default N
help
This is an experimental driver for the Beceem WIMAX chipset used
by Sprint 4G.
diff --git a/drivers/staging/frontier/Kconfig b/drivers/staging/frontier/Kconfig
index 7121853bd397..4da290b2f5bd 100644
--- a/drivers/staging/frontier/Kconfig
+++ b/drivers/staging/frontier/Kconfig
@@ -1,6 +1,5 @@
config TRANZPORT
tristate "Frontier Tranzport and Alphatrack support"
depends on USB
- default N
---help---
Enable support for the Frontier Tranzport and Alphatrack devices.
diff --git a/drivers/staging/media/go7007/Kconfig b/drivers/staging/media/go7007/Kconfig
index 04bd0fba7b1f..95a3af644a92 100644
--- a/drivers/staging/media/go7007/Kconfig
+++ b/drivers/staging/media/go7007/Kconfig
@@ -13,7 +13,6 @@ config VIDEO_GO7007
select VIDEO_TW9906 if MEDIA_SUBDRV_AUTOSELECT
select VIDEO_OV7640 if MEDIA_SUBDRV_AUTOSELECT
select VIDEO_UDA1342 if MEDIA_SUBDRV_AUTOSELECT
- default N
---help---
This is a video4linux driver for the WIS GO7007 MPEG
encoder chip.
@@ -24,7 +23,6 @@ config VIDEO_GO7007
config VIDEO_GO7007_USB
tristate "WIS GO7007 USB support"
depends on VIDEO_GO7007 && USB
- default N
---help---
This is a video4linux driver for the WIS GO7007 MPEG
encoder chip over USB.
@@ -46,7 +44,6 @@ config VIDEO_GO7007_LOADER
config VIDEO_GO7007_USB_S2250_BOARD
tristate "Sensoray 2250/2251 support"
depends on VIDEO_GO7007_USB && USB
- default N
---help---
This is a video4linux driver for the Sensoray 2250/2251 device.
diff --git a/drivers/staging/rtl8187se/Kconfig b/drivers/staging/rtl8187se/Kconfig
index 3162aabbeb07..ff8d41ebca36 100644
--- a/drivers/staging/rtl8187se/Kconfig
+++ b/drivers/staging/rtl8187se/Kconfig
@@ -6,6 +6,5 @@ config R8187SE
select WEXT_PRIV
select EEPROM_93CX6
select CRYPTO
- default N
---help---
If built as a module, it will be called r8187se.ko.
diff --git a/drivers/staging/rtl8188eu/Kconfig b/drivers/staging/rtl8188eu/Kconfig
index 9a57d31ed248..e45c106c2162 100644
--- a/drivers/staging/rtl8188eu/Kconfig
+++ b/drivers/staging/rtl8188eu/Kconfig
@@ -3,7 +3,6 @@ config R8188EU
depends on WLAN && USB
select WIRELESS_EXT
select WEXT_PRIV
- default N
---help---
This option adds the Realtek RTL8188EU USB device such as TP-Link TL-WN725N.
If built as a module, it will be called r8188eu.
diff --git a/drivers/staging/rtl8192e/rtl8192e/Kconfig b/drivers/staging/rtl8192e/rtl8192e/Kconfig
index 50e0d91a409a..ad82bc348a75 100644
--- a/drivers/staging/rtl8192e/rtl8192e/Kconfig
+++ b/drivers/staging/rtl8192e/rtl8192e/Kconfig
@@ -5,5 +5,4 @@ config RTL8192E
select WIRELESS_EXT
select WEXT_PRIV
select CRYPTO
- default N
---help---
diff --git a/drivers/staging/rtl8192u/Kconfig b/drivers/staging/rtl8192u/Kconfig
index 3f055091b35f..3ee9d0d00fb6 100644
--- a/drivers/staging/rtl8192u/Kconfig
+++ b/drivers/staging/rtl8192u/Kconfig
@@ -5,5 +5,4 @@ config RTL8192U
select WIRELESS_EXT
select WEXT_PRIV
select CRYPTO
- default N
---help---
diff --git a/drivers/staging/rtl8712/Kconfig b/drivers/staging/rtl8712/Kconfig
index 6a43312380e0..f160eee52f09 100644
--- a/drivers/staging/rtl8712/Kconfig
+++ b/drivers/staging/rtl8712/Kconfig
@@ -4,7 +4,6 @@ config R8712U
select WIRELESS_EXT
select WEXT_PRIV
select FW_LOADER
- default N
---help---
This option adds the Realtek RTL8712 USB device such as the D-Link DWA-130.
If built as a module, it will be called r8712u.
@@ -12,7 +11,6 @@ config R8712U
config R8712_TX_AGGR
bool "Realtek RTL8712U Transmit Aggregation code"
depends on R8712U && BROKEN
- default N
---help---
This option provides transmit aggregation for the Realtek RTL8712 USB device.
diff --git a/drivers/staging/usbip/Kconfig b/drivers/staging/usbip/Kconfig
index 886000980474..bd99e9e47e50 100644
--- a/drivers/staging/usbip/Kconfig
+++ b/drivers/staging/usbip/Kconfig
@@ -1,7 +1,6 @@
config USBIP_CORE
tristate "USB/IP support"
depends on USB && NET
- default N
---help---
This enables pushing USB packets over IP to allow remote
machines direct access to USB devices. It provides the
@@ -18,7 +17,6 @@ config USBIP_CORE
config USBIP_VHCI_HCD
tristate "VHCI hcd"
depends on USBIP_CORE
- default N
---help---
This enables the USB/IP virtual host controller driver,
which is run on the remote machine.
@@ -29,7 +27,6 @@ config USBIP_VHCI_HCD
config USBIP_HOST
tristate "Host driver"
depends on USBIP_CORE
- default N
---help---
This enables the USB/IP host driver, which is run on the
machine that is sharing the USB devices.
@@ -40,6 +37,5 @@ config USBIP_HOST
config USBIP_DEBUG
bool "Debug messages for USB/IP"
depends on USBIP_CORE
- default N
---help---
This enables the debug messages from the USB/IP drivers.
diff --git a/drivers/usb/core/Kconfig b/drivers/usb/core/Kconfig
index fed7f68d025d..cb8e99156f5a 100644
--- a/drivers/usb/core/Kconfig
+++ b/drivers/usb/core/Kconfig
@@ -10,7 +10,6 @@ config USB_DEBUG
config USB_ANNOUNCE_NEW_DEVICES
bool "USB announce new devices"
- default N
help
Say Y here if you want the USB core to always announce the
idVendor, idProduct, Manufacturer, Product, and SerialNumber
diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c
index 3cdcd0a2c0b7..0c8a7fc4dad8 100644
--- a/drivers/usb/core/message.c
+++ b/drivers/usb/core/message.c
@@ -178,7 +178,7 @@ EXPORT_SYMBOL_GPL(usb_control_msg);
*
* Return:
* If successful, 0. Otherwise a negative error number. The number of actual
- * bytes transferred will be stored in the @actual_length paramater.
+ * bytes transferred will be stored in the @actual_length parameter.
*/
int usb_interrupt_msg(struct usb_device *usb_dev, unsigned int pipe,
void *data, int len, int *actual_length, int timeout)
diff --git a/drivers/usb/core/urb.c b/drivers/usb/core/urb.c
index 9ff665f1322f..991386ceb4ec 100644
--- a/drivers/usb/core/urb.c
+++ b/drivers/usb/core/urb.c
@@ -831,7 +831,7 @@ EXPORT_SYMBOL_GPL(usb_unpoison_anchored_urbs);
*
* this allows all outstanding URBs to be unlinked starting
* from the back of the queue. This function is asynchronous.
- * The unlinking is just tiggered. It may happen after this
+ * The unlinking is just triggered. It may happen after this
* function has returned.
*
* This routine should not be called by a driver after its disconnect
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index e22b82660831..3d9e54062d62 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -314,7 +314,6 @@ config USB_ISP1760_HCD
config USB_ISP1362_HCD
tristate "ISP1362 HCD support"
- default N
---help---
Supports the Philips ISP1362 chip as a host controller
@@ -326,7 +325,6 @@ config USB_ISP1362_HCD
config USB_FUSBH200_HCD
tristate "FUSBH200 HCD support"
depends on USB
- default N
---help---
Faraday FUSBH200 is designed to meet USB2.0 EHCI specification
with minor modification.
@@ -337,7 +335,6 @@ config USB_FUSBH200_HCD
config USB_FOTG210_HCD
tristate "FOTG210 HCD support"
depends on USB
- default N
---help---
Faraday FOTG210 is an OTG controller which can be configured as
an USB2.0 host. It is designed to meet USB2.0 EHCI specification
generated by cgit v1.2.3 (git 2.0.4) at 2024-12-29 15:57:09 +0000