diff options
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/regulator/Kconfig | 8 | ||||
| -rw-r--r-- | drivers/regulator/core.c | 16 | ||||
| -rw-r--r-- | drivers/regulator/lp8755.c | 4 | ||||
| -rw-r--r-- | drivers/regulator/of_regulator.c | 4 |
4 files changed, 16 insertions, 16 deletions
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig index ee60a222f5eb..7fc1f88e27e7 100644 --- a/drivers/regulator/Kconfig +++ b/drivers/regulator/Kconfig @@ -484,7 +484,7 @@ config REGULATOR_MAX8925 tristate "Maxim MAX8925 Power Management IC" depends on MFD_MAX8925 help - Say y here to support the voltage regulaltor of Maxim MAX8925 PMIC. + Say y here to support the voltage regulator of Maxim MAX8925 PMIC. config REGULATOR_MAX8952 tristate "Maxim MAX8952 Power Management IC" @@ -501,7 +501,7 @@ config REGULATOR_MAX8973 select REGMAP_I2C help The MAXIM MAX8973 high-efficiency. three phase, DC-DC step-down - switching regulator delievers up to 9A of output current. Each + switching regulator delivers up to 9A of output current. Each phase operates at a 2MHz fixed frequency with a 120 deg shift from the adjacent phase, allowing the use of small magnetic component. @@ -646,7 +646,7 @@ config REGULATOR_PCF50633 tristate "NXP PCF50633 regulator driver" depends on MFD_PCF50633 help - Say Y here to support the voltage regulators and convertors + Say Y here to support the voltage regulators and converters on PCF50633 config REGULATOR_PFUZE100 @@ -924,7 +924,7 @@ config REGULATOR_TPS65132 select REGMAP_I2C help This driver supports TPS65132 single inductor - dual output - power supply specifcally designed for display panels. + power supply specifically designed for display panels. config REGULATOR_TPS65217 tristate "TI TPS65217 Power regulators" diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c index b9d7b45c7295..3f9d81b6e763 100644 --- a/drivers/regulator/core.c +++ b/drivers/regulator/core.c @@ -326,7 +326,7 @@ err_unlock: * @rdev: regulator source * @ww_ctx: w/w mutex acquire context * - * Unlock all regulators related with rdev by coupling or suppling. + * Unlock all regulators related with rdev by coupling or supplying. */ static void regulator_unlock_dependent(struct regulator_dev *rdev, struct ww_acquire_ctx *ww_ctx) @@ -341,7 +341,7 @@ static void regulator_unlock_dependent(struct regulator_dev *rdev, * @ww_ctx: w/w mutex acquire context * * This function as a wrapper on regulator_lock_recursive(), which locks - * all regulators related with rdev by coupling or suppling. + * all regulators related with rdev by coupling or supplying. */ static void regulator_lock_dependent(struct regulator_dev *rdev, struct ww_acquire_ctx *ww_ctx) @@ -1003,7 +1003,7 @@ static int suspend_set_state(struct regulator_dev *rdev, if (rstate == NULL) return 0; - /* If we have no suspend mode configration don't set anything; + /* If we have no suspend mode configuration don't set anything; * only warn if the driver implements set_suspend_voltage or * set_suspend_mode callback. */ @@ -1131,7 +1131,7 @@ static int machine_constraints_voltage(struct regulator_dev *rdev, int current_uV = _regulator_get_voltage(rdev); if (current_uV == -ENOTRECOVERABLE) { - /* This regulator can't be read and must be initted */ + /* This regulator can't be read and must be initialized */ rdev_info(rdev, "Setting %d-%duV\n", rdev->constraints->min_uV, rdev->constraints->max_uV); @@ -1780,7 +1780,7 @@ static int regulator_resolve_supply(struct regulator_dev *rdev) struct device *dev = rdev->dev.parent; int ret; - /* No supply to resovle? */ + /* No supply to resolve? */ if (!rdev->supply_name) return 0; @@ -2409,7 +2409,7 @@ static int _regulator_do_enable(struct regulator_dev *rdev) * timer wrapping. * in case of multiple timer wrapping, either it can be * detected by out-of-range remaining, or it cannot be - * detected and we gets a panelty of + * detected and we get a penalty of * _regulator_enable_delay(). */ remaining = intended - start_jiffy; @@ -2809,7 +2809,7 @@ static void regulator_disable_work(struct work_struct *work) /** * regulator_disable_deferred - disable regulator output with delay * @regulator: regulator source - * @ms: miliseconds until the regulator is disabled + * @ms: milliseconds until the regulator is disabled * * Execute regulator_disable() on the regulator after a delay. This * is intended for use with devices that require some time to quiesce. @@ -4943,7 +4943,7 @@ regulator_register(const struct regulator_desc *regulator_desc, * device tree until we have handled it over to the core. If the * config that was passed in to this function DOES NOT contain * a descriptor, and the config after this call DOES contain - * a descriptor, we definately got one from parsing the device + * a descriptor, we definitely got one from parsing the device * tree. */ if (!cfg->ena_gpiod && config->ena_gpiod) diff --git a/drivers/regulator/lp8755.c b/drivers/regulator/lp8755.c index 244822bb63cd..6d229ad4ef3e 100644 --- a/drivers/regulator/lp8755.c +++ b/drivers/regulator/lp8755.c @@ -386,7 +386,7 @@ static irqreturn_t lp8755_irq_handler(int irq, void *data) if (ret < 0) goto err_i2c; - /* send OCP event to all regualtor devices */ + /* send OCP event to all regulator devices */ if ((flag1 & 0x01) && (pchip->irqmask & 0x01)) for (icnt = 0; icnt < LP8755_BUCK_MAX; icnt++) if (pchip->rdev[icnt] != NULL) @@ -394,7 +394,7 @@ static irqreturn_t lp8755_irq_handler(int irq, void *data) LP8755_EVENT_OCP, NULL); - /* send OVP event to all regualtor devices */ + /* send OVP event to all regulator devices */ if ((flag1 & 0x02) && (pchip->irqmask & 0x02)) for (icnt = 0; icnt < LP8755_BUCK_MAX; icnt++) if (pchip->rdev[icnt] != NULL) diff --git a/drivers/regulator/of_regulator.c b/drivers/regulator/of_regulator.c index ffa5fc3724e4..7b6bf3536271 100644 --- a/drivers/regulator/of_regulator.c +++ b/drivers/regulator/of_regulator.c @@ -255,7 +255,7 @@ static void of_get_regulation_constraints(struct device_node *np, * @desc: regulator description * * Populates regulator_init_data structure by extracting data from device - * tree node, returns a pointer to the populated struture or NULL if memory + * tree node, returns a pointer to the populated structure or NULL if memory * alloc fails. */ struct regulator_init_data *of_get_regulator_init_data(struct device *dev, @@ -547,7 +547,7 @@ bool of_check_coupling_data(struct regulator_dev *rdev) NULL); if (c_n_phandles != n_phandles) { - dev_err(&rdev->dev, "number of couped reg phandles mismatch\n"); + dev_err(&rdev->dev, "number of coupled reg phandles mismatch\n"); ret = false; goto clean; } |