diff options
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/virt/nitro_enclaves/ne_pci_dev.h | 327 |
1 files changed, 327 insertions, 0 deletions
diff --git a/drivers/virt/nitro_enclaves/ne_pci_dev.h b/drivers/virt/nitro_enclaves/ne_pci_dev.h new file mode 100644 index 000000000000..8bfbc6607818 --- /dev/null +++ b/drivers/virt/nitro_enclaves/ne_pci_dev.h @@ -0,0 +1,327 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright 2020 Amazon.com, Inc. or its affiliates. All Rights Reserved. + */ + +#ifndef _NE_PCI_DEV_H_ +#define _NE_PCI_DEV_H_ + +#include <linux/atomic.h> +#include <linux/list.h> +#include <linux/mutex.h> +#include <linux/pci.h> +#include <linux/pci_ids.h> +#include <linux/wait.h> + +/** + * DOC: Nitro Enclaves (NE) PCI device + */ + +/** + * PCI_DEVICE_ID_NE - Nitro Enclaves PCI device id. + */ +#define PCI_DEVICE_ID_NE (0xe4c1) +/** + * PCI_BAR_NE - Nitro Enclaves PCI device MMIO BAR. + */ +#define PCI_BAR_NE (0x03) + +/** + * DOC: Device registers in the NE PCI device MMIO BAR + */ + +/** + * NE_ENABLE - (1 byte) Register to notify the device that the driver is using + * it (Read/Write). + */ +#define NE_ENABLE (0x0000) +#define NE_ENABLE_OFF (0x00) +#define NE_ENABLE_ON (0x01) + +/** + * NE_VERSION - (2 bytes) Register to select the device run-time version + * (Read/Write). + */ +#define NE_VERSION (0x0002) +#define NE_VERSION_MAX (0x0001) + +/** + * NE_COMMAND - (4 bytes) Register to notify the device what command was + * requested (Write-Only). + */ +#define NE_COMMAND (0x0004) + +/** + * NE_EVTCNT - (4 bytes) Register to notify the driver that a reply or a device + * event is available (Read-Only): + * - Lower half - command reply counter + * - Higher half - out-of-band device event counter + */ +#define NE_EVTCNT (0x000c) +#define NE_EVTCNT_REPLY_SHIFT (0) +#define NE_EVTCNT_REPLY_MASK (0x0000ffff) +#define NE_EVTCNT_REPLY(cnt) (((cnt) & NE_EVTCNT_REPLY_MASK) >> \ + NE_EVTCNT_REPLY_SHIFT) +#define NE_EVTCNT_EVENT_SHIFT (16) +#define NE_EVTCNT_EVENT_MASK (0xffff0000) +#define NE_EVTCNT_EVENT(cnt) (((cnt) & NE_EVTCNT_EVENT_MASK) >> \ + NE_EVTCNT_EVENT_SHIFT) + +/** + * NE_SEND_DATA - (240 bytes) Buffer for sending the command request payload + * (Read/Write). + */ +#define NE_SEND_DATA (0x0010) + +/** + * NE_RECV_DATA - (240 bytes) Buffer for receiving the command reply payload + * (Read-Only). + */ +#define NE_RECV_DATA (0x0100) + +/** + * DOC: Device MMIO buffer sizes + */ + +/** + * NE_SEND_DATA_SIZE / NE_RECV_DATA_SIZE - 240 bytes for send / recv buffer. + */ +#define NE_SEND_DATA_SIZE (240) +#define NE_RECV_DATA_SIZE (240) + +/** + * DOC: MSI-X interrupt vectors + */ + +/** + * NE_VEC_REPLY - MSI-X vector used for command reply notification. + */ +#define NE_VEC_REPLY (0) + +/** + * NE_VEC_EVENT - MSI-X vector used for out-of-band events e.g. enclave crash. + */ +#define NE_VEC_EVENT (1) + +/** + * enum ne_pci_dev_cmd_type - Device command types. + * @INVALID_CMD: Invalid command. + * @ENCLAVE_START: Start an enclave, after setting its resources. + * @ENCLAVE_GET_SLOT: Get the slot uid of an enclave. + * @ENCLAVE_STOP: Terminate an enclave. + * @SLOT_ALLOC : Allocate a slot for an enclave. + * @SLOT_FREE: Free the slot allocated for an enclave + * @SLOT_ADD_MEM: Add a memory region to an enclave slot. + * @SLOT_ADD_VCPU: Add a vCPU to an enclave slot. + * @SLOT_COUNT : Get the number of allocated slots. + * @NEXT_SLOT: Get the next slot in the list of allocated slots. + * @SLOT_INFO: Get the info for a slot e.g. slot uid, vCPUs count. + * @SLOT_ADD_BULK_VCPUS: Add a number of vCPUs, not providing CPU ids. + * @MAX_CMD: A gatekeeper for max possible command type. + */ +enum ne_pci_dev_cmd_type { + INVALID_CMD = 0, + ENCLAVE_START = 1, + ENCLAVE_GET_SLOT = 2, + ENCLAVE_STOP = 3, + SLOT_ALLOC = 4, + SLOT_FREE = 5, + SLOT_ADD_MEM = 6, + SLOT_ADD_VCPU = 7, + SLOT_COUNT = 8, + NEXT_SLOT = 9, + SLOT_INFO = 10, + SLOT_ADD_BULK_VCPUS = 11, + MAX_CMD, +}; + +/** + * DOC: Device commands - payload structure for requests and replies. + */ + +/** + * struct enclave_start_req - ENCLAVE_START request. + * @slot_uid: Slot unique id mapped to the enclave to start. + * @enclave_cid: Context ID (CID) for the enclave vsock device. + * If 0, CID is autogenerated. + * @flags: Flags for the enclave to start with (e.g. debug mode). + */ +struct enclave_start_req { + u64 slot_uid; + u64 enclave_cid; + u64 flags; +}; + +/** + * struct enclave_get_slot_req - ENCLAVE_GET_SLOT request. + * @enclave_cid: Context ID (CID) for the enclave vsock device. + */ +struct enclave_get_slot_req { + u64 enclave_cid; +}; + +/** + * struct enclave_stop_req - ENCLAVE_STOP request. + * @slot_uid: Slot unique id mapped to the enclave to stop. + */ +struct enclave_stop_req { + u64 slot_uid; +}; + +/** + * struct slot_alloc_req - SLOT_ALLOC request. + * @unused: In order to avoid weird sizeof edge cases. + */ +struct slot_alloc_req { + u8 unused; +}; + +/** + * struct slot_free_req - SLOT_FREE request. + * @slot_uid: Slot unique id mapped to the slot to free. + */ +struct slot_free_req { + u64 slot_uid; +}; + +/* TODO: Add flags field to the request to add memory region. */ +/** + * struct slot_add_mem_req - SLOT_ADD_MEM request. + * @slot_uid: Slot unique id mapped to the slot to add the memory region to. + * @paddr: Physical address of the memory region to add to the slot. + * @size: Memory size, in bytes, of the memory region to add to the slot. + */ +struct slot_add_mem_req { + u64 slot_uid; + u64 paddr; + u64 size; +}; + +/** + * struct slot_add_vcpu_req - SLOT_ADD_VCPU request. + * @slot_uid: Slot unique id mapped to the slot to add the vCPU to. + * @vcpu_id: vCPU ID of the CPU to add to the enclave. + * @padding: Padding for the overall data structure. + */ +struct slot_add_vcpu_req { + u64 slot_uid; + u32 vcpu_id; + u8 padding[4]; +}; + +/** + * struct slot_count_req - SLOT_COUNT request. + * @unused: In order to avoid weird sizeof edge cases. + */ +struct slot_count_req { + u8 unused; +}; + +/** + * struct next_slot_req - NEXT_SLOT request. + * @slot_uid: Slot unique id of the next slot in the iteration. + */ +struct next_slot_req { + u64 slot_uid; +}; + +/** + * struct slot_info_req - SLOT_INFO request. + * @slot_uid: Slot unique id mapped to the slot to get information about. + */ +struct slot_info_req { + u64 slot_uid; +}; + +/** + * struct slot_add_bulk_vcpus_req - SLOT_ADD_BULK_VCPUS request. + * @slot_uid: Slot unique id mapped to the slot to add vCPUs to. + * @nr_vcpus: Number of vCPUs to add to the slot. + */ +struct slot_add_bulk_vcpus_req { + u64 slot_uid; + u64 nr_vcpus; +}; + +/** + * struct ne_pci_dev_cmd_reply - NE PCI device command reply. + * @rc : Return code of the logic that processed the request. + * @padding0: Padding for the overall data structure. + * @slot_uid: Valid for all commands except SLOT_COUNT. + * @enclave_cid: Valid for ENCLAVE_START command. + * @slot_count : Valid for SLOT_COUNT command. + * @mem_regions: Valid for SLOT_ALLOC and SLOT_INFO commands. + * @mem_size: Valid for SLOT_INFO command. + * @nr_vcpus: Valid for SLOT_INFO command. + * @flags: Valid for SLOT_INFO command. + * @state: Valid for SLOT_INFO command. + * @padding1: Padding for the overall data structure. + */ +struct ne_pci_dev_cmd_reply { + s32 rc; + u8 padding0[4]; + u64 slot_uid; + u64 enclave_cid; + u64 slot_count; + u64 mem_regions; + u64 mem_size; + u64 nr_vcpus; + u64 flags; + u16 state; + u8 padding1[6]; +}; + +/** + * struct ne_pci_dev - Nitro Enclaves (NE) PCI device. + * @cmd_reply_avail: Variable set if a reply has been sent by the + * PCI device. + * @cmd_reply_wait_q: Wait queue for handling command reply from the + * PCI device. + * @enclaves_list: List of the enclaves managed by the PCI device. + * @enclaves_list_mutex: Mutex for accessing the list of enclaves. + * @event_wq: Work queue for handling out-of-band events + * triggered by the Nitro Hypervisor which require + * enclave state scanning and propagation to the + * enclave process. + * @iomem_base : MMIO region of the PCI device. + * @notify_work: Work item for every received out-of-band event. + * @pci_dev_mutex: Mutex for accessing the PCI device MMIO space. + * @pdev: PCI device data structure. + */ +struct ne_pci_dev { + atomic_t cmd_reply_avail; + wait_queue_head_t cmd_reply_wait_q; + struct list_head enclaves_list; + struct mutex enclaves_list_mutex; + struct workqueue_struct *event_wq; + void __iomem *iomem_base; + struct work_struct notify_work; + struct mutex pci_dev_mutex; + struct pci_dev *pdev; +}; + +/** + * ne_do_request() - Submit command request to the PCI device based on the command + * type and retrieve the associated reply. + * @pdev: PCI device to send the command to and receive the reply from. + * @cmd_type: Command type of the request sent to the PCI device. + * @cmd_request: Command request payload. + * @cmd_request_size: Size of the command request payload. + * @cmd_reply: Command reply payload. + * @cmd_reply_size: Size of the command reply payload. + * + * Context: Process context. This function uses the ne_pci_dev mutex to handle + * one command at a time. + * Return: + * * 0 on success. + * * Negative return value on failure. + */ +int ne_do_request(struct pci_dev *pdev, enum ne_pci_dev_cmd_type cmd_type, + void *cmd_request, size_t cmd_request_size, + struct ne_pci_dev_cmd_reply *cmd_reply, + size_t cmd_reply_size); + +/* Nitro Enclaves (NE) PCI device driver */ +extern struct pci_driver ne_pci_driver; + +#endif /* _NE_PCI_DEV_H_ */ |