summaryrefslogtreecommitdiff
path: root/drivers
diff options
context:
space:
mode:
Diffstat (limited to 'drivers')
-rw-r--r--drivers/base/cpu.c10
-rw-r--r--drivers/block/cciss.c8
-rw-r--r--drivers/block/ub.c63
-rw-r--r--drivers/block/virtio_blk.c44
-rw-r--r--drivers/char/i8k.c6
-rw-r--r--drivers/char/mmtimer.c24
-rw-r--r--drivers/char/synclink.c16
-rw-r--r--drivers/firewire/fw-sbp2.c2
-rw-r--r--drivers/gpio/pca953x.c4
-rw-r--r--drivers/hwmon/adt7473.c45
-rw-r--r--drivers/hwmon/asb100.c4
-rw-r--r--drivers/hwmon/lm75.c5
-rw-r--r--drivers/hwmon/smsc47b397.c17
-rw-r--r--drivers/hwmon/w83793.c26
-rw-r--r--drivers/hwmon/w83l785ts.c4
-rw-r--r--drivers/ide/ide-probe.c3
-rw-r--r--drivers/ieee1394/nodemgr.c5
-rw-r--r--drivers/isdn/hysdn/hysdn_procconf.c3
-rw-r--r--drivers/lguest/lguest_device.c68
-rw-r--r--drivers/lguest/lguest_user.c4
-rw-r--r--drivers/mtd/chips/cfi_cmdset_0001.c14
-rw-r--r--drivers/mtd/devices/mtdram.c11
-rw-r--r--drivers/mtd/devices/phram.c13
-rw-r--r--drivers/mtd/devices/pmc551.c27
-rw-r--r--drivers/mtd/devices/slram.c15
-rw-r--r--drivers/mtd/maps/uclinux.c6
-rw-r--r--drivers/mtd/mtdpart.c8
-rw-r--r--drivers/mtd/nand/at91_nand.c42
-rw-r--r--drivers/net/fec.c125
-rw-r--r--drivers/net/fec.h4
-rw-r--r--drivers/net/virtio_net.c96
-rw-r--r--drivers/pcmcia/au1000_db1x00.c6
-rw-r--r--drivers/pcmcia/au1000_generic.c11
-rw-r--r--drivers/pcmcia/au1000_pb1x00.c14
-rw-r--r--drivers/pcmcia/au1000_xxs1500.c2
-rw-r--r--drivers/pcmcia/cardbus.c2
-rw-r--r--drivers/pcmcia/ds.c2
-rw-r--r--drivers/pcmcia/i82092.c6
-rw-r--r--drivers/pcmcia/omap_cf.c2
-rw-r--r--drivers/pcmcia/pd6729.c6
-rw-r--r--drivers/pcmcia/pxa2xx_lubbock.c8
-rw-r--r--drivers/pcmcia/pxa2xx_mainstone.c4
-rw-r--r--drivers/pcmcia/rsrc_nonstatic.c2
-rw-r--r--drivers/pcmcia/sa1100_assabet.c4
-rw-r--r--drivers/pcmcia/sa1100_badge4.c8
-rw-r--r--drivers/pcmcia/sa1100_cerf.c2
-rw-r--r--drivers/pcmcia/sa1100_jornada720.c4
-rw-r--r--drivers/pcmcia/sa1100_neponset.c4
-rw-r--r--drivers/pcmcia/sa1100_shannon.c8
-rw-r--r--drivers/pcmcia/sa1100_simpad.c2
-rw-r--r--drivers/pcmcia/soc_common.c17
-rw-r--r--drivers/pcmcia/soc_common.h1
-rw-r--r--drivers/pnp/pnpbios/rsparser.c6
-rw-r--r--drivers/scsi/mvsas.c4
-rw-r--r--drivers/scsi/ncr53c8xx.c2
-rw-r--r--drivers/serial/8250.c3
-rw-r--r--drivers/serial/8250_early.c2
-rw-r--r--drivers/serial/8250_pci.c14
-rw-r--r--drivers/serial/jsm/jsm.h1
-rw-r--r--drivers/serial/jsm/jsm_driver.c6
-rw-r--r--drivers/spi/spi_bfin5xx.c7
-rw-r--r--drivers/spi/spi_s3c24xx.c6
-rw-r--r--drivers/usb/Makefile2
-rw-r--r--drivers/usb/atm/Kconfig4
-rw-r--r--drivers/usb/c67x00/Makefile9
-rw-r--r--drivers/usb/c67x00/c67x00-drv.c243
-rw-r--r--drivers/usb/c67x00/c67x00-hcd.c412
-rw-r--r--drivers/usb/c67x00/c67x00-hcd.h133
-rw-r--r--drivers/usb/c67x00/c67x00-ll-hpi.c480
-rw-r--r--drivers/usb/c67x00/c67x00-sched.c1170
-rw-r--r--drivers/usb/c67x00/c67x00.h294
-rw-r--r--drivers/usb/core/message.c4
-rw-r--r--drivers/usb/gadget/Kconfig20
-rw-r--r--drivers/usb/gadget/Makefile1
-rw-r--r--drivers/usb/gadget/ether.c8
-rw-r--r--drivers/usb/gadget/file_storage.c25
-rw-r--r--drivers/usb/gadget/pxa27x_udc.c2404
-rw-r--r--drivers/usb/gadget/pxa27x_udc.h487
-rw-r--r--drivers/usb/gadget/serial.c90
-rw-r--r--drivers/usb/gadget/zero.c370
-rw-r--r--drivers/usb/host/Kconfig39
-rw-r--r--drivers/usb/host/Makefile4
-rw-r--r--drivers/usb/host/isp1760-hcd.c2231
-rw-r--r--drivers/usb/host/isp1760-hcd.h206
-rw-r--r--drivers/usb/host/isp1760-if.c298
-rw-r--r--drivers/usb/host/ohci-hub.c2
-rw-r--r--drivers/usb/host/uhci-hcd.c74
-rw-r--r--drivers/usb/host/uhci-hcd.h5
-rw-r--r--drivers/usb/misc/ldusb.c28
-rw-r--r--drivers/usb/misc/usbtest.c276
-rw-r--r--drivers/usb/serial/aircable.c98
-rw-r--r--drivers/usb/serial/airprime.c63
-rw-r--r--drivers/usb/serial/ark3116.c54
-rw-r--r--drivers/usb/serial/ch341.c2
-rw-r--r--drivers/usb/serial/ftdi_sio.c8
-rw-r--r--drivers/usb/serial/ftdi_sio.h11
-rw-r--r--drivers/usb/serial/mos7840.c5
-rw-r--r--drivers/usb/storage/Kconfig3
-rw-r--r--drivers/usb/storage/libusual.c2
-rw-r--r--drivers/usb/storage/onetouch.c4
-rw-r--r--drivers/usb/storage/unusual_devs.h28
-rw-r--r--drivers/usb/storage/usb.c3
-rw-r--r--drivers/virtio/virtio.c38
-rw-r--r--drivers/virtio/virtio_balloon.c12
-rw-r--r--drivers/virtio/virtio_pci.c34
-rw-r--r--drivers/virtio/virtio_ring.c5
106 files changed, 9660 insertions, 917 deletions
diff --git a/drivers/base/cpu.c b/drivers/base/cpu.c
index 6fe417429977..e38dfed41d80 100644
--- a/drivers/base/cpu.c
+++ b/drivers/base/cpu.c
@@ -18,7 +18,7 @@ struct sysdev_class cpu_sysdev_class = {
};
EXPORT_SYMBOL(cpu_sysdev_class);
-static struct sys_device *cpu_sys_devices[NR_CPUS];
+static DEFINE_PER_CPU(struct sys_device *, cpu_sys_devices);
#ifdef CONFIG_HOTPLUG_CPU
static ssize_t show_online(struct sys_device *dev, char *buf)
@@ -68,7 +68,7 @@ void unregister_cpu(struct cpu *cpu)
sysdev_remove_file(&cpu->sysdev, &attr_online);
sysdev_unregister(&cpu->sysdev);
- cpu_sys_devices[logical_cpu] = NULL;
+ per_cpu(cpu_sys_devices, logical_cpu) = NULL;
return;
}
#else /* ... !CONFIG_HOTPLUG_CPU */
@@ -167,7 +167,7 @@ int __cpuinit register_cpu(struct cpu *cpu, int num)
if (!error && cpu->hotpluggable)
register_cpu_control(cpu);
if (!error)
- cpu_sys_devices[num] = &cpu->sysdev;
+ per_cpu(cpu_sys_devices, num) = &cpu->sysdev;
if (!error)
register_cpu_under_node(num, cpu_to_node(num));
@@ -180,8 +180,8 @@ int __cpuinit register_cpu(struct cpu *cpu, int num)
struct sys_device *get_cpu_sysdev(unsigned cpu)
{
- if (cpu < NR_CPUS)
- return cpu_sys_devices[cpu];
+ if (cpu < nr_cpu_ids && cpu_possible(cpu))
+ return per_cpu(cpu_sys_devices, cpu);
else
return NULL;
}
diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c
index e539be5750dc..e336b05fe4a7 100644
--- a/drivers/block/cciss.c
+++ b/drivers/block/cciss.c
@@ -428,13 +428,9 @@ static void __devinit cciss_procinit(int i)
proc_cciss = proc_mkdir("driver/cciss", NULL);
if (!proc_cciss)
return;
- pde = proc_create(hba[i]->devname, S_IWUSR | S_IRUSR | S_IRGRP |
+ pde = proc_create_data(hba[i]->devname, S_IWUSR | S_IRUSR | S_IRGRP |
S_IROTH, proc_cciss,
- &cciss_proc_fops);
- if (!pde)
- return;
-
- pde->data = hba[i];
+ &cciss_proc_fops, hba[i]);
}
#endif /* CONFIG_PROC_FS */
diff --git a/drivers/block/ub.c b/drivers/block/ub.c
index e322cce8c12d..3a281ef11ffa 100644
--- a/drivers/block/ub.c
+++ b/drivers/block/ub.c
@@ -205,6 +205,7 @@ struct ub_scsi_cmd {
unsigned char key, asc, ascq; /* May be valid if error==-EIO */
int stat_count; /* Retries getting status. */
+ unsigned int timeo; /* jiffies until rq->timeout changes */
unsigned int len; /* Requested length */
unsigned int current_sg;
@@ -318,6 +319,7 @@ struct ub_dev {
int openc; /* protected by ub_lock! */
/* kref is too implicit for our taste */
int reset; /* Reset is running */
+ int bad_resid;
unsigned int tagcnt;
char name[12];
struct usb_device *dev;
@@ -764,6 +766,12 @@ static void ub_cmd_build_packet(struct ub_dev *sc, struct ub_lun *lun,
cmd->cdb_len = rq->cmd_len;
cmd->len = rq->data_len;
+
+ /*
+ * To reapply this to every URB is not as incorrect as it looks.
+ * In return, we avoid any complicated tracking calculations.
+ */
+ cmd->timeo = rq->timeout;
}
static void ub_rw_cmd_done(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
@@ -785,10 +793,6 @@ static void ub_rw_cmd_done(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
scsi_status = 0;
} else {
if (cmd->act_len != cmd->len) {
- if ((cmd->key == MEDIUM_ERROR ||
- cmd->key == UNIT_ATTENTION) &&
- ub_rw_cmd_retry(sc, lun, urq, cmd) == 0)
- return;
scsi_status = SAM_STAT_CHECK_CONDITION;
} else {
scsi_status = 0;
@@ -804,7 +808,10 @@ static void ub_rw_cmd_done(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
else
scsi_status = DID_ERROR << 16;
} else {
- if (cmd->error == -EIO) {
+ if (cmd->error == -EIO &&
+ (cmd->key == 0 ||
+ cmd->key == MEDIUM_ERROR ||
+ cmd->key == UNIT_ATTENTION)) {
if (ub_rw_cmd_retry(sc, lun, urq, cmd) == 0)
return;
}
@@ -1259,14 +1266,19 @@ static void ub_scsi_urb_compl(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
return;
}
- len = le32_to_cpu(bcs->Residue);
- if (len != cmd->len - cmd->act_len) {
- /*
- * It is all right to transfer less, the caller has
- * to check. But it's not all right if the device
- * counts disagree with our counts.
- */
- goto Bad_End;
+ if (!sc->bad_resid) {
+ len = le32_to_cpu(bcs->Residue);
+ if (len != cmd->len - cmd->act_len) {
+ /*
+ * Only start ignoring if this cmd ended well.
+ */
+ if (cmd->len == cmd->act_len) {
+ printk(KERN_NOTICE "%s: "
+ "bad residual %d of %d, ignoring\n",
+ sc->name, len, cmd->len);
+ sc->bad_resid = 1;
+ }
+ }
}
switch (bcs->Status) {
@@ -1297,8 +1309,7 @@ static void ub_scsi_urb_compl(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
ub_state_done(sc, cmd, -EIO);
} else {
- printk(KERN_WARNING "%s: "
- "wrong command state %d\n",
+ printk(KERN_WARNING "%s: wrong command state %d\n",
sc->name, cmd->state);
ub_state_done(sc, cmd, -EINVAL);
return;
@@ -1336,7 +1347,10 @@ static void ub_data_start(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
return;
}
- sc->work_timer.expires = jiffies + UB_DATA_TIMEOUT;
+ if (cmd->timeo)
+ sc->work_timer.expires = jiffies + cmd->timeo;
+ else
+ sc->work_timer.expires = jiffies + UB_DATA_TIMEOUT;
add_timer(&sc->work_timer);
cmd->state = UB_CMDST_DATA;
@@ -1376,7 +1390,10 @@ static int __ub_state_stat(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
return -1;
}
- sc->work_timer.expires = jiffies + UB_STAT_TIMEOUT;
+ if (cmd->timeo)
+ sc->work_timer.expires = jiffies + cmd->timeo;
+ else
+ sc->work_timer.expires = jiffies + UB_STAT_TIMEOUT;
add_timer(&sc->work_timer);
return 0;
}
@@ -1515,8 +1532,7 @@ static void ub_top_sense_done(struct ub_dev *sc, struct ub_scsi_cmd *scmd)
return;
}
if (cmd->state != UB_CMDST_SENSE) {
- printk(KERN_WARNING "%s: "
- "sense done with bad cmd state %d\n",
+ printk(KERN_WARNING "%s: sense done with bad cmd state %d\n",
sc->name, cmd->state);
return;
}
@@ -1720,7 +1736,7 @@ static int ub_bd_ioctl(struct inode *inode, struct file *filp,
}
/*
- * This is called once a new disk was seen by the block layer or by ub_probe().
+ * This is called by check_disk_change if we reported a media change.
* The main onjective here is to discover the features of the media such as
* the capacity, read-only status, etc. USB storage generally does not
* need to be spun up, but if we needed it, this would be the place.
@@ -2136,8 +2152,7 @@ static int ub_get_pipes(struct ub_dev *sc, struct usb_device *dev,
}
if (ep_in == NULL || ep_out == NULL) {
- printk(KERN_NOTICE "%s: failed endpoint check\n",
- sc->name);
+ printk(KERN_NOTICE "%s: failed endpoint check\n", sc->name);
return -ENODEV;
}
@@ -2354,7 +2369,7 @@ static void ub_disconnect(struct usb_interface *intf)
spin_unlock_irqrestore(&ub_lock, flags);
/*
- * Fence stall clearnings, operations triggered by unlinkings and so on.
+ * Fence stall clearings, operations triggered by unlinkings and so on.
* We do not attempt to unlink any URBs, because we do not trust the
* unlink paths in HC drivers. Also, we get -84 upon disconnect anyway.
*/
@@ -2417,7 +2432,7 @@ static void ub_disconnect(struct usb_interface *intf)
spin_unlock_irqrestore(sc->lock, flags);
/*
- * There is virtually no chance that other CPU runs times so long
+ * There is virtually no chance that other CPU runs a timeout so long
* after ub_urb_complete should have called del_timer, but only if HCD
* didn't forget to deliver a callback on unlink.
*/
diff --git a/drivers/block/virtio_blk.c b/drivers/block/virtio_blk.c
index 0cfbe8c594a5..84e064ffee52 100644
--- a/drivers/block/virtio_blk.c
+++ b/drivers/block/virtio_blk.c
@@ -35,7 +35,7 @@ struct virtblk_req
struct list_head list;
struct request *req;
struct virtio_blk_outhdr out_hdr;
- struct virtio_blk_inhdr in_hdr;
+ u8 status;
};
static void blk_done(struct virtqueue *vq)
@@ -48,7 +48,7 @@ static void blk_done(struct virtqueue *vq)
spin_lock_irqsave(&vblk->lock, flags);
while ((vbr = vblk->vq->vq_ops->get_buf(vblk->vq, &len)) != NULL) {
int uptodate;
- switch (vbr->in_hdr.status) {
+ switch (vbr->status) {
case VIRTIO_BLK_S_OK:
uptodate = 1;
break;
@@ -101,7 +101,7 @@ static bool do_req(struct request_queue *q, struct virtio_blk *vblk,
sg_init_table(vblk->sg, VIRTIO_MAX_SG);
sg_set_buf(&vblk->sg[0], &vbr->out_hdr, sizeof(vbr->out_hdr));
num = blk_rq_map_sg(q, vbr->req, vblk->sg+1);
- sg_set_buf(&vblk->sg[num+1], &vbr->in_hdr, sizeof(vbr->in_hdr));
+ sg_set_buf(&vblk->sg[num+1], &vbr->status, sizeof(vbr->status));
if (rq_data_dir(vbr->req) == WRITE) {
vbr->out_hdr.type |= VIRTIO_BLK_T_OUT;
@@ -157,10 +157,25 @@ static int virtblk_ioctl(struct inode *inode, struct file *filp,
/* We provide getgeo only to please some old bootloader/partitioning tools */
static int virtblk_getgeo(struct block_device *bd, struct hd_geometry *geo)
{
- /* some standard values, similar to sd */
- geo->heads = 1 << 6;
- geo->sectors = 1 << 5;
- geo->cylinders = get_capacity(bd->bd_disk) >> 11;
+ struct virtio_blk *vblk = bd->bd_disk->private_data;
+ struct virtio_blk_geometry vgeo;
+ int err;
+
+ /* see if the host passed in geometry config */
+ err = virtio_config_val(vblk->vdev, VIRTIO_BLK_F_GEOMETRY,
+ offsetof(struct virtio_blk_config, geometry),
+ &vgeo);
+
+ if (!err) {
+ geo->heads = vgeo.heads;
+ geo->sectors = vgeo.sectors;
+ geo->cylinders = vgeo.cylinders;
+ } else {
+ /* some standard values, similar to sd */
+ geo->heads = 1 << 6;
+ geo->sectors = 1 << 5;
+ geo->cylinders = get_capacity(bd->bd_disk) >> 11;
+ }
return 0;
}
@@ -242,12 +257,12 @@ static int virtblk_probe(struct virtio_device *vdev)
index++;
/* If barriers are supported, tell block layer that queue is ordered */
- if (vdev->config->feature(vdev, VIRTIO_BLK_F_BARRIER))
+ if (virtio_has_feature(vdev, VIRTIO_BLK_F_BARRIER))
blk_queue_ordered(vblk->disk->queue, QUEUE_ORDERED_TAG, NULL);
/* Host must always specify the capacity. */
- __virtio_config_val(vdev, offsetof(struct virtio_blk_config, capacity),
- &cap);
+ vdev->config->get(vdev, offsetof(struct virtio_blk_config, capacity),
+ &cap, sizeof(cap));
/* If capacity is too big, truncate with warning. */
if ((sector_t)cap != cap) {
@@ -289,7 +304,6 @@ out:
static void virtblk_remove(struct virtio_device *vdev)
{
struct virtio_blk *vblk = vdev->priv;
- int major = vblk->disk->major;
/* Nothing should be pending. */
BUG_ON(!list_empty(&vblk->reqs));
@@ -299,7 +313,6 @@ static void virtblk_remove(struct virtio_device *vdev)
blk_cleanup_queue(vblk->disk->queue);
put_disk(vblk->disk);
- unregister_blkdev(major, "virtblk");
mempool_destroy(vblk->pool);
vdev->config->del_vq(vblk->vq);
kfree(vblk);
@@ -310,7 +323,14 @@ static struct virtio_device_id id_table[] = {
{ 0 },
};
+static unsigned int features[] = {
+ VIRTIO_BLK_F_BARRIER, VIRTIO_BLK_F_SEG_MAX, VIRTIO_BLK_F_SIZE_MAX,
+ VIRTIO_BLK_F_GEOMETRY,
+};
+
static struct virtio_driver virtio_blk = {
+ .feature_table = features,
+ .feature_table_size = ARRAY_SIZE(features),
.driver.name = KBUILD_MODNAME,
.driver.owner = THIS_MODULE,
.id_table = id_table,
diff --git a/drivers/char/i8k.c b/drivers/char/i8k.c
index f49037b744f9..b60d425ce8d1 100644
--- a/drivers/char/i8k.c
+++ b/drivers/char/i8k.c
@@ -77,6 +77,10 @@ static int power_status;
module_param(power_status, bool, 0600);
MODULE_PARM_DESC(power_status, "Report power status in /proc/i8k");
+static int fan_mult = I8K_FAN_MULT;
+module_param(fan_mult, int, 0);
+MODULE_PARM_DESC(fan_mult, "Factor to multiply fan speed with");
+
static int i8k_open_fs(struct inode *inode, struct file *file);
static int i8k_ioctl(struct inode *, struct file *, unsigned int,
unsigned long);
@@ -239,7 +243,7 @@ static int i8k_get_fan_speed(int fan)
struct smm_regs regs = { .eax = I8K_SMM_GET_SPEED, };
regs.ebx = fan & 0xff;
- return i8k_smm(&regs) ? : (regs.eax & 0xffff) * I8K_FAN_MULT;
+ return i8k_smm(&regs) ? : (regs.eax & 0xffff) * fan_mult;
}
/*
diff --git a/drivers/char/mmtimer.c b/drivers/char/mmtimer.c
index d83db5d880e0..192961fd7173 100644
--- a/drivers/char/mmtimer.c
+++ b/drivers/char/mmtimer.c
@@ -30,6 +30,8 @@
#include <linux/miscdevice.h>
#include <linux/posix-timers.h>
#include <linux/interrupt.h>
+#include <linux/time.h>
+#include <linux/math64.h>
#include <asm/uaccess.h>
#include <asm/sn/addrs.h>
@@ -472,8 +474,8 @@ static int sgi_clock_get(clockid_t clockid, struct timespec *tp)
nsec = rtc_time() * sgi_clock_period
+ sgi_clock_offset.tv_nsec;
- tp->tv_sec = div_long_long_rem(nsec, NSEC_PER_SEC, &tp->tv_nsec)
- + sgi_clock_offset.tv_sec;
+ *tp = ns_to_timespec(nsec);
+ tp->tv_sec += sgi_clock_offset.tv_sec;
return 0;
};
@@ -481,11 +483,11 @@ static int sgi_clock_set(clockid_t clockid, struct timespec *tp)
{
u64 nsec;
- u64 rem;
+ u32 rem;
nsec = rtc_time() * sgi_clock_period;
- sgi_clock_offset.tv_sec = tp->tv_sec - div_long_long_rem(nsec, NSEC_PER_SEC, &rem);
+ sgi_clock_offset.tv_sec = tp->tv_sec - div_u64_rem(nsec, NSEC_PER_SEC, &rem);
if (rem <= tp->tv_nsec)
sgi_clock_offset.tv_nsec = tp->tv_sec - rem;
@@ -644,9 +646,6 @@ static int sgi_timer_del(struct k_itimer *timr)
return 0;
}
-#define timespec_to_ns(x) ((x).tv_nsec + (x).tv_sec * NSEC_PER_SEC)
-#define ns_to_timespec(ts, nsec) (ts).tv_sec = div_long_long_rem(nsec, NSEC_PER_SEC, &(ts).tv_nsec)
-
/* Assumption: it_lock is already held with irq's disabled */
static void sgi_timer_get(struct k_itimer *timr, struct itimerspec *cur_setting)
{
@@ -659,9 +658,8 @@ static void sgi_timer_get(struct k_itimer *timr, struct itimerspec *cur_setting)
return;
}
- ns_to_timespec(cur_setting->it_interval, timr->it.mmtimer.incr * sgi_clock_period);
- ns_to_timespec(cur_setting->it_value, (timr->it.mmtimer.expires - rtc_time())* sgi_clock_period);
- return;
+ cur_setting->it_interval = ns_to_timespec(timr->it.mmtimer.incr * sgi_clock_period);
+ cur_setting->it_value = ns_to_timespec((timr->it.mmtimer.expires - rtc_time()) * sgi_clock_period);
}
@@ -679,8 +677,8 @@ static int sgi_timer_set(struct k_itimer *timr, int flags,
sgi_timer_get(timr, old_setting);
sgi_timer_del(timr);
- when = timespec_to_ns(new_setting->it_value);
- period = timespec_to_ns(new_setting->it_interval);
+ when = timespec_to_ns(&new_setting->it_value);
+ period = timespec_to_ns(&new_setting->it_interval);
if (when == 0)
/* Clear timer */
@@ -695,7 +693,7 @@ static int sgi_timer_set(struct k_itimer *timr, int flags,
unsigned long now;
getnstimeofday(&n);
- now = timespec_to_ns(n);
+ now = timespec_to_ns(&n);
if (when > now)
when -= now;
else
diff --git a/drivers/char/synclink.c b/drivers/char/synclink.c
index 513b7c2f3e26..ac5080df2565 100644
--- a/drivers/char/synclink.c
+++ b/drivers/char/synclink.c
@@ -2028,13 +2028,13 @@ static void mgsl_change_params(struct mgsl_struct *info)
*/
static int mgsl_put_char(struct tty_struct *tty, unsigned char ch)
{
- struct mgsl_struct *info = (struct mgsl_struct *)tty->driver_data;
+ struct mgsl_struct *info = tty->driver_data;
unsigned long flags;
- int ret;
+ int ret = 0;
- if ( debug_level >= DEBUG_LEVEL_INFO ) {
- printk( "%s(%d):mgsl_put_char(%d) on %s\n",
- __FILE__,__LINE__,ch,info->device_name);
+ if (debug_level >= DEBUG_LEVEL_INFO) {
+ printk(KERN_DEBUG "%s(%d):mgsl_put_char(%d) on %s\n",
+ __FILE__, __LINE__, ch, info->device_name);
}
if (mgsl_paranoia_check(info, tty->name, "mgsl_put_char"))
@@ -2043,9 +2043,9 @@ static int mgsl_put_char(struct tty_struct *tty, unsigned char ch)
if (!tty || !info->xmit_buf)
return 0;
- spin_lock_irqsave(&info->irq_spinlock,flags);
+ spin_lock_irqsave(&info->irq_spinlock, flags);
- if ( (info->params.mode == MGSL_MODE_ASYNC ) || !info->tx_active ) {
+ if ((info->params.mode == MGSL_MODE_ASYNC ) || !info->tx_active) {
if (info->xmit_cnt < SERIAL_XMIT_SIZE - 1) {
info->xmit_buf[info->xmit_head++] = ch;
info->xmit_head &= SERIAL_XMIT_SIZE-1;
@@ -2053,7 +2053,7 @@ static int mgsl_put_char(struct tty_struct *tty, unsigned char ch)
ret = 1;
}
}
- spin_unlock_irqrestore(&info->irq_spinlock,flags);
+ spin_unlock_irqrestore(&info->irq_spinlock, flags);
return ret;
} /* end of mgsl_put_char() */
diff --git a/drivers/firewire/fw-sbp2.c b/drivers/firewire/fw-sbp2.c
index 2a999373863e..62e3c9190983 100644
--- a/drivers/firewire/fw-sbp2.c
+++ b/drivers/firewire/fw-sbp2.c
@@ -784,7 +784,7 @@ static void sbp2_release_target(struct kref *kref)
kfree(lu);
}
scsi_remove_host(shost);
- fw_notify("released %s\n", tgt->bus_id);
+ fw_notify("released %s, target %d:0:0\n", tgt->bus_id, shost->host_no);
fw_unit_put(tgt->unit);
scsi_host_put(shost);
diff --git a/drivers/gpio/pca953x.c b/drivers/gpio/pca953x.c
index 5a99e81d2784..93f916720b13 100644
--- a/drivers/gpio/pca953x.c
+++ b/drivers/gpio/pca953x.c
@@ -30,6 +30,8 @@ static const struct i2c_device_id pca953x_id[] = {
{ "pca9537", 4, },
{ "pca9538", 8, },
{ "pca9539", 16, },
+ { "pca9555", 16, },
+ { "pca9557", 8, },
/* REVISIT several pca955x parts should work here too */
{ }
};
@@ -193,7 +195,7 @@ static int __devinit pca953x_probe(struct i2c_client *client,
{
struct pca953x_platform_data *pdata;
struct pca953x_chip *chip;
- int ret, i;
+ int ret;
pdata = client->dev.platform_data;
if (pdata == NULL)
diff --git a/drivers/hwmon/adt7473.c b/drivers/hwmon/adt7473.c
index 9587869bdba0..c1009d6f9796 100644
--- a/drivers/hwmon/adt7473.c
+++ b/drivers/hwmon/adt7473.c
@@ -422,18 +422,14 @@ static ssize_t show_volt(struct device *dev, struct device_attribute *devattr,
* number in the range -128 to 127, or as an unsigned number that must
* be offset by 64.
*/
-static int decode_temp(struct adt7473_data *data, u8 raw)
+static int decode_temp(u8 twos_complement, u8 raw)
{
- if (data->temp_twos_complement)
- return (s8)raw;
- return raw - 64;
+ return twos_complement ? (s8)raw : raw - 64;
}
-static u8 encode_temp(struct adt7473_data *data, int cooked)
+static u8 encode_temp(u8 twos_complement, int cooked)
{
- if (data->temp_twos_complement)
- return (cooked & 0xFF);
- return cooked + 64;
+ return twos_complement ? cooked & 0xFF : cooked + 64;
}
static ssize_t show_temp_min(struct device *dev,
@@ -442,8 +438,9 @@ static ssize_t show_temp_min(struct device *dev,
{
struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
struct adt7473_data *data = adt7473_update_device(dev);
- return sprintf(buf, "%d\n",
- 1000 * decode_temp(data, data->temp_min[attr->index]));
+ return sprintf(buf, "%d\n", 1000 * decode_temp(
+ data->temp_twos_complement,
+ data->temp_min[attr->index]));
}
static ssize_t set_temp_min(struct device *dev,
@@ -455,7 +452,7 @@ static ssize_t set_temp_min(struct device *dev,
struct i2c_client *client = to_i2c_client(dev);
struct adt7473_data *data = i2c_get_clientdata(client);
int temp = simple_strtol(buf, NULL, 10) / 1000;
- temp = encode_temp(data, temp);
+ temp = encode_temp(data->temp_twos_complement, temp);
mutex_lock(&data->lock);
data->temp_min[attr->index] = temp;
@@ -472,8 +469,9 @@ static ssize_t show_temp_max(struct device *dev,
{
struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
struct adt7473_data *data = adt7473_update_device(dev);
- return sprintf(buf, "%d\n",
- 1000 * decode_temp(data, data->temp_max[attr->index]));
+ return sprintf(buf, "%d\n", 1000 * decode_temp(
+ data->temp_twos_complement,
+ data->temp_max[attr->index]));
}
static ssize_t set_temp_max(struct device *dev,
@@ -485,7 +483,7 @@ static ssize_t set_temp_max(struct device *dev,
struct i2c_client *client = to_i2c_client(dev);
struct adt7473_data *data = i2c_get_clientdata(client);
int temp = simple_strtol(buf, NULL, 10) / 1000;
- temp = encode_temp(data, temp);
+ temp = encode_temp(data->temp_twos_complement, temp);
mutex_lock(&data->lock);
data->temp_max[attr->index] = temp;
@@ -501,8 +499,9 @@ static ssize_t show_temp(struct device *dev, struct device_attribute *devattr,
{
struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
struct adt7473_data *data = adt7473_update_device(dev);
- return sprintf(buf, "%d\n",
- 1000 * decode_temp(data, data->temp[attr->index]));
+ return sprintf(buf, "%d\n", 1000 * decode_temp(
+ data->temp_twos_complement,
+ data->temp[attr->index]));
}
static ssize_t show_fan_min(struct device *dev,
@@ -671,8 +670,9 @@ static ssize_t show_temp_tmax(struct device *dev,
{
struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
struct adt7473_data *data = adt7473_update_device(dev);
- return sprintf(buf, "%d\n",
- 1000 * decode_temp(data, data->temp_tmax[attr->index]));
+ return sprintf(buf, "%d\n", 1000 * decode_temp(
+ data->temp_twos_complement,
+ data->temp_tmax[attr->index]));
}
static ssize_t set_temp_tmax(struct device *dev,
@@ -684,7 +684,7 @@ static ssize_t set_temp_tmax(struct device *dev,
struct i2c_client *client = to_i2c_client(dev);
struct adt7473_data *data = i2c_get_clientdata(client);
int temp = simple_strtol(buf, NULL, 10) / 1000;
- temp = encode_temp(data, temp);
+ temp = encode_temp(data->temp_twos_complement, temp);
mutex_lock(&data->lock);
data->temp_tmax[attr->index] = temp;
@@ -701,8 +701,9 @@ static ssize_t show_temp_tmin(struct device *dev,
{
struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
struct adt7473_data *data = adt7473_update_device(dev);
- return sprintf(buf, "%d\n",
- 1000 * decode_temp(data, data->temp_tmin[attr->index]));
+ return sprintf(buf, "%d\n", 1000 * decode_temp(
+ data->temp_twos_complement,
+ data->temp_tmin[attr->index]));
}
static ssize_t set_temp_tmin(struct device *dev,
@@ -714,7 +715,7 @@ static ssize_t set_temp_tmin(struct device *dev,
struct i2c_client *client = to_i2c_client(dev);
struct adt7473_data *data = i2c_get_clientdata(client);
int temp = simple_strtol(buf, NULL, 10) / 1000;
- temp = encode_temp(data, temp);
+ temp = encode_temp(data->temp_twos_complement, temp);
mutex_lock(&data->lock);
data->temp_tmin[attr->index] = temp;
diff --git a/drivers/hwmon/asb100.c b/drivers/hwmon/asb100.c
index 84712a22acea..fe2eea4d799b 100644
--- a/drivers/hwmon/asb100.c
+++ b/drivers/hwmon/asb100.c
@@ -953,12 +953,8 @@ static void asb100_write_value(struct i2c_client *client, u16 reg, u16 value)
static void asb100_init_client(struct i2c_client *client)
{
struct asb100_data *data = i2c_get_clientdata(client);
- int vid = 0;
- vid = asb100_read_value(client, ASB100_REG_VID_FANDIV) & 0x0f;
- vid |= (asb100_read_value(client, ASB100_REG_CHIPID) & 0x01) << 4;
data->vrm = vid_which_vrm();
- vid = vid_from_reg(vid, data->vrm);
/* Start monitoring */
asb100_write_value(client, ASB100_REG_CONFIG,
diff --git a/drivers/hwmon/lm75.c b/drivers/hwmon/lm75.c
index 115f4090b98e..fa7696905154 100644
--- a/drivers/hwmon/lm75.c
+++ b/drivers/hwmon/lm75.c
@@ -248,7 +248,7 @@ static int lm75_detach_client(struct i2c_client *client)
/* All registers are word-sized, except for the configuration register.
LM75 uses a high-byte first convention, which is exactly opposite to
- the usual practice. */
+ the SMBus standard. */
static int lm75_read_value(struct i2c_client *client, u8 reg)
{
if (reg == LM75_REG_CONF)
@@ -257,9 +257,6 @@ static int lm75_read_value(struct i2c_client *client, u8 reg)
return swab16(i2c_smbus_read_word_data(client, reg));
}
-/* All registers are word-sized, except for the configuration register.
- LM75 uses a high-byte first convention, which is exactly opposite to
- the usual practice. */
static int lm75_write_value(struct i2c_client *client, u8 reg, u16 value)
{
if (reg == LM75_REG_CONF)
diff --git a/drivers/hwmon/smsc47b397.c b/drivers/hwmon/smsc47b397.c
index f61d8f4185b2..eb03544c731c 100644
--- a/drivers/hwmon/smsc47b397.c
+++ b/drivers/hwmon/smsc47b397.c
@@ -335,11 +335,23 @@ exit:
static int __init smsc47b397_find(unsigned short *addr)
{
u8 id, rev;
+ char *name;
superio_enter();
id = force_id ? force_id : superio_inb(SUPERIO_REG_DEVID);
- if ((id != 0x6f) && (id != 0x81) && (id != 0x85)) {
+ switch(id) {
+ case 0x81:
+ name = "SCH5307-NS";
+ break;
+ case 0x6f:
+ name = "LPC47B397-NC";
+ break;
+ case 0x85:
+ case 0x8c:
+ name = "SCH5317";
+ break;
+ default:
superio_exit();
return -ENODEV;
}
@@ -352,8 +364,7 @@ static int __init smsc47b397_find(unsigned short *addr)
printk(KERN_INFO DRVNAME ": found SMSC %s "
"(base address 0x%04x, revision %u)\n",
- id == 0x81 ? "SCH5307-NS" : id == 0x85 ? "SCH5317" :
- "LPC47B397-NC", *addr, rev);
+ name, *addr, rev);
superio_exit();
return 0;
diff --git a/drivers/hwmon/w83793.c b/drivers/hwmon/w83793.c
index ee35af93b574..ed3c019b78c7 100644
--- a/drivers/hwmon/w83793.c
+++ b/drivers/hwmon/w83793.c
@@ -1024,10 +1024,9 @@ static struct sensor_device_attribute_2 w83793_vid[] = {
SENSOR_ATTR_2(cpu0_vid, S_IRUGO, show_vid, NULL, NOT_USED, 0),
SENSOR_ATTR_2(cpu1_vid, S_IRUGO, show_vid, NULL, NOT_USED, 1),
};
+static DEVICE_ATTR(vrm, S_IWUSR | S_IRUGO, show_vrm, store_vrm);
static struct sensor_device_attribute_2 sda_single_files[] = {
- SENSOR_ATTR_2(vrm, S_IWUSR | S_IRUGO, show_vrm, store_vrm,
- NOT_USED, NOT_USED),
SENSOR_ATTR_2(chassis, S_IWUSR | S_IRUGO, show_alarm_beep,
store_chassis_clear, ALARM_STATUS, 30),
SENSOR_ATTR_2(beep_enable, S_IWUSR | S_IRUGO, show_beep_enable,
@@ -1080,6 +1079,7 @@ static int w83793_detach_client(struct i2c_client *client)
for (i = 0; i < ARRAY_SIZE(w83793_vid); i++)
device_remove_file(dev, &w83793_vid[i].dev_attr);
+ device_remove_file(dev, &dev_attr_vrm);
for (i = 0; i < ARRAY_SIZE(w83793_left_fan); i++)
device_remove_file(dev, &w83793_left_fan[i].dev_attr);
@@ -1282,7 +1282,6 @@ static int w83793_detect(struct i2c_adapter *adapter, int address, int kind)
/* Initialize the chip */
w83793_init_client(client);
- data->vrm = vid_which_vrm();
/*
Only fan 1-5 has their own input pins,
Pwm 1-3 has their own pins
@@ -1293,7 +1292,9 @@ static int w83793_detect(struct i2c_adapter *adapter, int address, int kind)
val = w83793_read_value(client, W83793_REG_FANIN_CTRL);
/* check the function of pins 49-56 */
- if (!(tmp & 0x80)) {
+ if (tmp & 0x80) {
+ data->has_vid |= 0x2; /* has VIDB */
+ } else {
data->has_pwm |= 0x18; /* pwm 4,5 */
if (val & 0x01) { /* fan 6 */
data->has_fan |= 0x20;
@@ -1309,13 +1310,15 @@ static int w83793_detect(struct i2c_adapter *adapter, int address, int kind)
}
}
+ /* check the function of pins 37-40 */
+ if (!(tmp & 0x29))
+ data->has_vid |= 0x1; /* has VIDA */
if (0x08 == (tmp & 0x0c)) {
if (val & 0x08) /* fan 9 */
data->has_fan |= 0x100;
if (val & 0x10) /* fan 10 */
data->has_fan |= 0x200;
}
-
if (0x20 == (tmp & 0x30)) {
if (val & 0x20) /* fan 11 */
data->has_fan |= 0x400;
@@ -1359,13 +1362,6 @@ static int w83793_detect(struct i2c_adapter *adapter, int address, int kind)
if (tmp & 0x02)
data->has_temp |= 0x20;
- /* Detect the VID usage and ignore unused input */
- tmp = w83793_read_value(client, W83793_REG_MFC);
- if (!(tmp & 0x29))
- data->has_vid |= 0x1; /* has VIDA */
- if (tmp & 0x80)
- data->has_vid |= 0x2; /* has VIDB */
-
/* Register sysfs hooks */
for (i = 0; i < ARRAY_SIZE(w83793_sensor_attr_2); i++) {
err = device_create_file(dev,
@@ -1381,6 +1377,12 @@ static int w83793_detect(struct i2c_adapter *adapter, int address, int kind)
if (err)
goto exit_remove;
}
+ if (data->has_vid) {
+ data->vrm = vid_which_vrm();
+ err = device_create_file(dev, &dev_attr_vrm);
+ if (err)
+ goto exit_remove;
+ }
for (i = 0; i < ARRAY_SIZE(sda_single_files); i++) {
err = device_create_file(dev, &sda_single_files[i].dev_attr);
diff --git a/drivers/hwmon/w83l785ts.c b/drivers/hwmon/w83l785ts.c
index 77f2d482888b..52e268e25dab 100644
--- a/drivers/hwmon/w83l785ts.c
+++ b/drivers/hwmon/w83l785ts.c
@@ -301,8 +301,8 @@ static u8 w83l785ts_read_value(struct i2c_client *client, u8 reg, u8 defval)
msleep(i);
}
- dev_err(&client->dev, "Couldn't read value from register 0x%02x. "
- "Please report.\n", reg);
+ dev_err(&client->dev, "Couldn't read value from register 0x%02x.\n",
+ reg);
return defval;
}
diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c
index 099a0fe1745b..591deda3f86a 100644
--- a/drivers/ide/ide-probe.c
+++ b/drivers/ide/ide-probe.c
@@ -1347,7 +1347,8 @@ static void ide_init_port(ide_hwif_t *hwif, unsigned int port,
(d->host_flags & IDE_HFLAG_FORCE_LEGACY_IRQS))
hwif->irq = port ? 15 : 14;
- hwif->host_flags = d->host_flags;
+ /* ->host_flags may be set by ->init_iops (or even earlier...) */
+ hwif->host_flags |= d->host_flags;
hwif->pio_mask = d->pio_mask;
/* ->set_pio_mode for DTC2278 is currently limited to port 0 */
diff --git a/drivers/ieee1394/nodemgr.c b/drivers/ieee1394/nodemgr.c
index 29d833e71cbf..05710c7c1220 100644
--- a/drivers/ieee1394/nodemgr.c
+++ b/drivers/ieee1394/nodemgr.c
@@ -520,8 +520,11 @@ static ssize_t fw_show_drv_device_ids(struct device_driver *drv, char *buf)
char *scratch = buf;
driver = container_of(drv, struct hpsb_protocol_driver, driver);
+ id = driver->id_table;
+ if (!id)
+ return 0;
- for (id = driver->id_table; id->match_flags != 0; id++) {
+ for (; id->match_flags != 0; id++) {
int need_coma = 0;
if (id->match_flags & IEEE1394_MATCH_VENDOR_ID) {
diff --git a/drivers/isdn/hysdn/hysdn_procconf.c b/drivers/isdn/hysdn/hysdn_procconf.c
index 877be9922c3d..15906d005b05 100644
--- a/drivers/isdn/hysdn/hysdn_procconf.c
+++ b/drivers/isdn/hysdn/hysdn_procconf.c
@@ -405,7 +405,8 @@ hysdn_procconf_init(void)
sprintf(conf_name, "%s%d", PROC_CONF_BASENAME, card->myid);
if ((card->procconf = (void *) proc_create(conf_name,
S_IFREG | S_IRUGO | S_IWUSR,
- hysdn_proc_entry)) != NULL) {
+ hysdn_proc_entry,
+ &conf_fops)) != NULL) {
hysdn_proclog_init(card); /* init the log file entry */
}
card = card->next; /* next entry */
diff --git a/drivers/lguest/lguest_device.c b/drivers/lguest/lguest_device.c
index 2bc9bf7e88e5..8080249957af 100644
--- a/drivers/lguest/lguest_device.c
+++ b/drivers/lguest/lguest_device.c
@@ -85,27 +85,34 @@ static unsigned desc_size(const struct lguest_device_desc *desc)
+ desc->config_len;
}
-/* This tests (and acknowleges) a feature bit. */
-static bool lg_feature(struct virtio_device *vdev, unsigned fbit)
+/* This gets the device's feature bits. */
+static u32 lg_get_features(struct virtio_device *vdev)
{
+ unsigned int i;
+ u32 features = 0;
struct lguest_device_desc *desc = to_lgdev(vdev)->desc;
- u8 *features;
-
- /* Obviously if they ask for a feature off the end of our feature
- * bitmap, it's not set. */
- if (fbit / 8 > desc->feature_len)
- return false;
-
- /* The feature bitmap comes after the virtqueues. */
- features = lg_features(desc);
- if (!(features[fbit / 8] & (1 << (fbit % 8))))
- return false;
-
- /* We set the matching bit in the other half of the bitmap to tell the
- * Host we want to use this feature. We don't use this yet, but we
- * could in future. */
- features[desc->feature_len + fbit / 8] |= (1 << (fbit % 8));
- return true;
+ u8 *in_features = lg_features(desc);
+
+ /* We do this the slow but generic way. */
+ for (i = 0; i < min(desc->feature_len * 8, 32); i++)
+ if (in_features[i / 8] & (1 << (i % 8)))
+ features |= (1 << i);
+
+ return features;
+}
+
+static void lg_set_features(struct virtio_device *vdev, u32 features)
+{
+ unsigned int i;
+ struct lguest_device_desc *desc = to_lgdev(vdev)->desc;
+ /* Second half of bitmap is features we accept. */
+ u8 *out_features = lg_features(desc) + desc->feature_len;
+
+ memset(out_features, 0, desc->feature_len);
+ for (i = 0; i < min(desc->feature_len * 8, 32); i++) {
+ if (features & (1 << i))
+ out_features[i / 8] |= (1 << (i % 8));
+ }
}
/* Once they've found a field, getting a copy of it is easy. */
@@ -137,20 +144,26 @@ static u8 lg_get_status(struct virtio_device *vdev)
return to_lgdev(vdev)->desc->status;
}
+/* To notify on status updates, we (ab)use the NOTIFY hypercall, with the
+ * descriptor address of the device. A zero status means "reset". */
+static void set_status(struct virtio_device *vdev, u8 status)
+{
+ unsigned long offset = (void *)to_lgdev(vdev)->desc - lguest_devices;
+
+ /* We set the status. */
+ to_lgdev(vdev)->desc->status = status;
+ hcall(LHCALL_NOTIFY, (max_pfn<<PAGE_SHIFT) + offset, 0, 0);
+}
+
static void lg_set_status(struct virtio_device *vdev, u8 status)
{
BUG_ON(!status);
- to_lgdev(vdev)->desc->status = status;
+ set_status(vdev, status);
}
-/* To reset the device, we (ab)use the NOTIFY hypercall, with the descriptor
- * address of the device. The Host will zero the status and all the
- * features. */
static void lg_reset(struct virtio_device *vdev)
{
- unsigned long offset = (void *)to_lgdev(vdev)->desc - lguest_devices;
-
- hcall(LHCALL_NOTIFY, (max_pfn<<PAGE_SHIFT) + offset, 0, 0);
+ set_status(vdev, 0);
}
/*
@@ -286,7 +299,8 @@ static void lg_del_vq(struct virtqueue *vq)
/* The ops structure which hooks everything together. */
static struct virtio_config_ops lguest_config_ops = {
- .feature = lg_feature,
+ .get_features = lg_get_features,
+ .set_features = lg_set_features,
.get = lg_get,
.set = lg_set,
.get_status = lg_get_status,
diff --git a/drivers/lguest/lguest_user.c b/drivers/lguest/lguest_user.c
index 645e6e040bfb..e73a000473cc 100644
--- a/drivers/lguest/lguest_user.c
+++ b/drivers/lguest/lguest_user.c
@@ -102,7 +102,7 @@ static ssize_t read(struct file *file, char __user *user, size_t size,loff_t*o)
static int lg_cpu_start(struct lg_cpu *cpu, unsigned id, unsigned long start_ip)
{
/* We have a limited number the number of CPUs in the lguest struct. */
- if (id >= NR_CPUS)
+ if (id >= ARRAY_SIZE(cpu->lg->cpus))
return -EINVAL;
/* Set up this CPU's id, and pointer back to the lguest struct. */
@@ -251,8 +251,6 @@ static ssize_t write(struct file *file, const char __user *in,
if (!lg || (cpu_id >= lg->nr_cpus))
return -EINVAL;
cpu = &lg->cpus[cpu_id];
- if (!cpu)
- return -EINVAL;
/* Once the Guest is dead, you can only read() why it died. */
if (lg->dead)
diff --git a/drivers/mtd/chips/cfi_cmdset_0001.c b/drivers/mtd/chips/cfi_cmdset_0001.c
index e812df607a5c..fcd1aeccdf93 100644
--- a/drivers/mtd/chips/cfi_cmdset_0001.c
+++ b/drivers/mtd/chips/cfi_cmdset_0001.c
@@ -82,9 +82,8 @@ static struct mtd_info *cfi_intelext_setup (struct mtd_info *);
static int cfi_intelext_partition_fixup(struct mtd_info *, struct cfi_private **);
static int cfi_intelext_point (struct mtd_info *mtd, loff_t from, size_t len,
- size_t *retlen, u_char **mtdbuf);
-static void cfi_intelext_unpoint (struct mtd_info *mtd, u_char *addr, loff_t from,
- size_t len);
+ size_t *retlen, void **virt, resource_size_t *phys);
+static void cfi_intelext_unpoint(struct mtd_info *mtd, loff_t from, size_t len);
static int chip_ready (struct map_info *map, struct flchip *chip, unsigned long adr, int mode);
static int get_chip(struct map_info *map, struct flchip *chip, unsigned long adr, int mode);
@@ -1240,7 +1239,8 @@ static int do_point_onechip (struct map_info *map, struct flchip *chip, loff_t a
return ret;
}
-static int cfi_intelext_point (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char **mtdbuf)
+static int cfi_intelext_point(struct mtd_info *mtd, loff_t from, size_t len,
+ size_t *retlen, void **virt, resource_size_t *phys)
{
struct map_info *map = mtd->priv;
struct cfi_private *cfi = map->fldrv_priv;
@@ -1257,8 +1257,10 @@ static int cfi_intelext_point (struct mtd_info *mtd, loff_t from, size_t len, si
chipnum = (from >> cfi->chipshift);
ofs = from - (chipnum << cfi->chipshift);
- *mtdbuf = (void *)map->virt + cfi->chips[chipnum].start + ofs;
+ *virt = map->virt + cfi->chips[chipnum].start + ofs;
*retlen = 0;
+ if (phys)
+ *phys = map->phys + cfi->chips[chipnum].start + ofs;
while (len) {
unsigned long thislen;
@@ -1291,7 +1293,7 @@ static int cfi_intelext_point (struct mtd_info *mtd, loff_t from, size_t len, si
return 0;
}
-static void cfi_intelext_unpoint (struct mtd_info *mtd, u_char *addr, loff_t from, size_t len)
+static void cfi_intelext_unpoint(struct mtd_info *mtd, loff_t from, size_t len)
{
struct map_info *map = mtd->priv;
struct cfi_private *cfi = map->fldrv_priv;
diff --git a/drivers/mtd/devices/mtdram.c b/drivers/mtd/devices/mtdram.c
index bf485ff49457..0399be178620 100644
--- a/drivers/mtd/devices/mtdram.c
+++ b/drivers/mtd/devices/mtdram.c
@@ -48,18 +48,21 @@ static int ram_erase(struct mtd_info *mtd, struct erase_info *instr)
}
static int ram_point(struct mtd_info *mtd, loff_t from, size_t len,
- size_t *retlen, u_char **mtdbuf)
+ size_t *retlen, void **virt, resource_size_t *phys)
{
if (from + len > mtd->size)
return -EINVAL;
- *mtdbuf = mtd->priv + from;
+ /* can we return a physical address with this driver? */
+ if (phys)
+ return -EINVAL;
+
+ *virt = mtd->priv + from;
*retlen = len;
return 0;
}
-static void ram_unpoint(struct mtd_info *mtd, u_char * addr, loff_t from,
- size_t len)
+static void ram_unpoint(struct mtd_info *mtd, loff_t from, size_t len)
{
}
diff --git a/drivers/mtd/devices/phram.c b/drivers/mtd/devices/phram.c
index 5f960182da95..c7987b1c5e01 100644
--- a/drivers/mtd/devices/phram.c
+++ b/drivers/mtd/devices/phram.c
@@ -57,20 +57,21 @@ static int phram_erase(struct mtd_info *mtd, struct erase_info *instr)
}
static int phram_point(struct mtd_info *mtd, loff_t from, size_t len,
- size_t *retlen, u_char **mtdbuf)
+ size_t *retlen, void **virt, resource_size_t *phys)
{
- u_char *start = mtd->priv;
-
if (from + len > mtd->size)
return -EINVAL;
- *mtdbuf = start + from;
+ /* can we return a physical address with this driver? */
+ if (phys)
+ return -EINVAL;
+
+ *virt = mtd->priv + from;
*retlen = len;
return 0;
}
-static void phram_unpoint(struct mtd_info *mtd, u_char *addr, loff_t from,
- size_t len)
+static void phram_unpoint(struct mtd_info *mtd, loff_t from, size_t len)
{
}
diff --git a/drivers/mtd/devices/pmc551.c b/drivers/mtd/devices/pmc551.c
index 7060a0895ce2..bc9981749064 100644
--- a/drivers/mtd/devices/pmc551.c
+++ b/drivers/mtd/devices/pmc551.c
@@ -134,7 +134,8 @@ static int pmc551_erase(struct mtd_info *mtd, struct erase_info *instr)
eoff_lo = end & (priv->asize - 1);
soff_lo = instr->addr & (priv->asize - 1);
- pmc551_point(mtd, instr->addr, instr->len, &retlen, &ptr);
+ pmc551_point(mtd, instr->addr, instr->len, &retlen,
+ (void **)&ptr, NULL);
if (soff_hi == eoff_hi || mtd->size == priv->asize) {
/* The whole thing fits within one access, so just one shot
@@ -154,7 +155,8 @@ static int pmc551_erase(struct mtd_info *mtd, struct erase_info *instr)
}
soff_hi += priv->asize;
pmc551_point(mtd, (priv->base_map0 | soff_hi),
- priv->asize, &retlen, &ptr);
+ priv->asize, &retlen,
+ (void **)&ptr, NULL);
}
memset(ptr, 0xff, eoff_lo);
}
@@ -170,7 +172,7 @@ static int pmc551_erase(struct mtd_info *mtd, struct erase_info *instr)
}
static int pmc551_point(struct mtd_info *mtd, loff_t from, size_t len,
- size_t * retlen, u_char ** mtdbuf)
+ size_t *retlen, void **virt, resource_size_t *phys)
{
struct mypriv *priv = mtd->priv;
u32 soff_hi;
@@ -188,6 +190,10 @@ static int pmc551_point(struct mtd_info *mtd, loff_t from, size_t len,
return -EINVAL;
}
+ /* can we return a physical address with this driver? */
+ if (phys)
+ return -EINVAL;
+
soff_hi = from & ~(priv->asize - 1);
soff_lo = from & (priv->asize - 1);
@@ -198,13 +204,12 @@ static int pmc551_point(struct mtd_info *mtd, loff_t from, size_t len,
priv->curr_map0 = soff_hi;
}
- *mtdbuf = priv->start + soff_lo;
+ *virt = priv->start + soff_lo;
*retlen = len;
return 0;
}
-static void pmc551_unpoint(struct mtd_info *mtd, u_char * addr, loff_t from,
- size_t len)
+static void pmc551_unpoint(struct mtd_info *mtd, loff_t from, size_t len)
{
#ifdef CONFIG_MTD_PMC551_DEBUG
printk(KERN_DEBUG "pmc551_unpoint()\n");
@@ -242,7 +247,7 @@ static int pmc551_read(struct mtd_info *mtd, loff_t from, size_t len,
soff_lo = from & (priv->asize - 1);
eoff_lo = end & (priv->asize - 1);
- pmc551_point(mtd, from, len, retlen, &ptr);
+ pmc551_point(mtd, from, len, retlen, (void **)&ptr, NULL);
if (soff_hi == eoff_hi) {
/* The whole thing fits within one access, so just one shot
@@ -263,7 +268,8 @@ static int pmc551_read(struct mtd_info *mtd, loff_t from, size_t len,
goto out;
}
soff_hi += priv->asize;
- pmc551_point(mtd, soff_hi, priv->asize, retlen, &ptr);
+ pmc551_point(mtd, soff_hi, priv->asize, retlen,
+ (void **)&ptr, NULL);
}
memcpy(copyto, ptr, eoff_lo);
copyto += eoff_lo;
@@ -308,7 +314,7 @@ static int pmc551_write(struct mtd_info *mtd, loff_t to, size_t len,
soff_lo = to & (priv->asize - 1);
eoff_lo = end & (priv->asize - 1);
- pmc551_point(mtd, to, len, retlen, &ptr);
+ pmc551_point(mtd, to, len, retlen, (void **)&ptr, NULL);
if (soff_hi == eoff_hi) {
/* The whole thing fits within one access, so just one shot
@@ -329,7 +335,8 @@ static int pmc551_write(struct mtd_info *mtd, loff_t to, size_t len,
goto out;
}
soff_hi += priv->asize;
- pmc551_point(mtd, soff_hi, priv->asize, retlen, &ptr);
+ pmc551_point(mtd, soff_hi, priv->asize, retlen,
+ (void **)&ptr, NULL);
}
memcpy(ptr, copyfrom, eoff_lo);
copyfrom += eoff_lo;
diff --git a/drivers/mtd/devices/slram.c b/drivers/mtd/devices/slram.c
index d293add1857c..cb86db746f28 100644
--- a/drivers/mtd/devices/slram.c
+++ b/drivers/mtd/devices/slram.c
@@ -76,8 +76,9 @@ static char *map;
static slram_mtd_list_t *slram_mtdlist = NULL;
static int slram_erase(struct mtd_info *, struct erase_info *);
-static int slram_point(struct mtd_info *, loff_t, size_t, size_t *, u_char **);
-static void slram_unpoint(struct mtd_info *, u_char *, loff_t, size_t);
+static int slram_point(struct mtd_info *, loff_t, size_t, size_t *, void **,
+ resource_size_t *);
+static void slram_unpoint(struct mtd_info *, loff_t, size_t);
static int slram_read(struct mtd_info *, loff_t, size_t, size_t *, u_char *);
static int slram_write(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
@@ -104,19 +105,23 @@ static int slram_erase(struct mtd_info *mtd, struct erase_info *instr)
}
static int slram_point(struct mtd_info *mtd, loff_t from, size_t len,
- size_t *retlen, u_char **mtdbuf)
+ size_t *retlen, void **virt, resource_size_t *phys)
{
slram_priv_t *priv = mtd->priv;
+ /* can we return a physical address with this driver? */
+ if (phys)
+ return -EINVAL;
+
if (from + len > mtd->size)
return -EINVAL;
- *mtdbuf = priv->start + from;
+ *virt = priv->start + from;
*retlen = len;
return(0);
}
-static void slram_unpoint(struct mtd_info *mtd, u_char *addr, loff_t from, size_t len)
+static void slram_unpoint(struct mtd_info *mtd, loff_t from, size_t len)
{
}
diff --git a/drivers/mtd/maps/uclinux.c b/drivers/mtd/maps/uclinux.c
index 14ffb1a9302a..c42f4b83f686 100644
--- a/drivers/mtd/maps/uclinux.c
+++ b/drivers/mtd/maps/uclinux.c
@@ -40,10 +40,12 @@ struct mtd_partition uclinux_romfs[] = {
/****************************************************************************/
int uclinux_point(struct mtd_info *mtd, loff_t from, size_t len,
- size_t *retlen, u_char **mtdbuf)
+ size_t *retlen, void **virt, resource_size_t *phys)
{
struct map_info *map = mtd->priv;
- *mtdbuf = (u_char *) (map->virt + ((int) from));
+ *virt = map->virt + from;
+ if (phys)
+ *phys = map->phys + from;
*retlen = len;
return(0);
}
diff --git a/drivers/mtd/mtdpart.c b/drivers/mtd/mtdpart.c
index c66902df3171..07c701169344 100644
--- a/drivers/mtd/mtdpart.c
+++ b/drivers/mtd/mtdpart.c
@@ -68,7 +68,7 @@ static int part_read (struct mtd_info *mtd, loff_t from, size_t len,
}
static int part_point (struct mtd_info *mtd, loff_t from, size_t len,
- size_t *retlen, u_char **buf)
+ size_t *retlen, void **virt, resource_size_t *phys)
{
struct mtd_part *part = PART(mtd);
if (from >= mtd->size)
@@ -76,14 +76,14 @@ static int part_point (struct mtd_info *mtd, loff_t from, size_t len,
else if (from + len > mtd->size)
len = mtd->size - from;
return part->master->point (part->master, from + part->offset,
- len, retlen, buf);
+ len, retlen, virt, phys);
}
-static void part_unpoint (struct mtd_info *mtd, u_char *addr, loff_t from, size_t len)
+static void part_unpoint(struct mtd_info *mtd, loff_t from, size_t len)
{
struct mtd_part *part = PART(mtd);
- part->master->unpoint (part->master, addr, from + part->offset, len);
+ part->master->unpoint(part->master, from + part->offset, len);
}
static int part_read_oob(struct mtd_info *mtd, loff_t from,
diff --git a/drivers/mtd/nand/at91_nand.c b/drivers/mtd/nand/at91_nand.c
index 414ceaecdb3a..0adb287027a2 100644
--- a/drivers/mtd/nand/at91_nand.c
+++ b/drivers/mtd/nand/at91_nand.c
@@ -94,6 +94,24 @@ struct at91_nand_host {
};
/*
+ * Enable NAND.
+ */
+static void at91_nand_enable(struct at91_nand_host *host)
+{
+ if (host->board->enable_pin)
+ at91_set_gpio_value(host->board->enable_pin, 0);
+}
+
+/*
+ * Disable NAND.
+ */
+static void at91_nand_disable(struct at91_nand_host *host)
+{
+ if (host->board->enable_pin)
+ at91_set_gpio_value(host->board->enable_pin, 1);
+}
+
+/*
* Hardware specific access to control-lines
*/
static void at91_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
@@ -101,11 +119,11 @@ static void at91_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
struct nand_chip *nand_chip = mtd->priv;
struct at91_nand_host *host = nand_chip->priv;
- if (host->board->enable_pin && (ctrl & NAND_CTRL_CHANGE)) {
+ if (ctrl & NAND_CTRL_CHANGE) {
if (ctrl & NAND_NCE)
- at91_set_gpio_value(host->board->enable_pin, 0);
+ at91_nand_enable(host);
else
- at91_set_gpio_value(host->board->enable_pin, 1);
+ at91_nand_disable(host);
}
if (cmd == NAND_CMD_NONE)
return;
@@ -128,24 +146,6 @@ static int at91_nand_device_ready(struct mtd_info *mtd)
}
/*
- * Enable NAND.
- */
-static void at91_nand_enable(struct at91_nand_host *host)
-{
- if (host->board->enable_pin)
- at91_set_gpio_value(host->board->enable_pin, 0);
-}
-
-/*
- * Disable NAND.
- */
-static void at91_nand_disable(struct at91_nand_host *host)
-{
- if (host->board->enable_pin)
- at91_set_gpio_value(host->board->enable_pin, 1);
-}
-
-/*
* write oob for small pages
*/
static int at91_nand_write_oob_512(struct mtd_info *mtd,
diff --git a/drivers/net/fec.c b/drivers/net/fec.c
index d7a3ea88eddb..32a4f17d35fc 100644
--- a/drivers/net/fec.c
+++ b/drivers/net/fec.c
@@ -67,6 +67,10 @@
#define FEC_MAX_PORTS 1
#endif
+#if defined(CONFIG_FADS) || defined(CONFIG_RPXCLASSIC) || defined(CONFIG_M5272)
+#define HAVE_mii_link_interrupt
+#endif
+
/*
* Define the fixed address of the FEC hardware.
*/
@@ -205,7 +209,10 @@ struct fec_enet_private {
cbd_t *cur_rx, *cur_tx; /* The next free ring entry */
cbd_t *dirty_tx; /* The ring entries to be free()ed. */
uint tx_full;
- spinlock_t lock;
+ /* hold while accessing the HW like ringbuffer for tx/rx but not MAC */
+ spinlock_t hw_lock;
+ /* hold while accessing the mii_list_t() elements */
+ spinlock_t mii_lock;
uint phy_id;
uint phy_id_done;
@@ -309,6 +316,7 @@ fec_enet_start_xmit(struct sk_buff *skb, struct net_device *dev)
volatile fec_t *fecp;
volatile cbd_t *bdp;
unsigned short status;
+ unsigned long flags;
fep = netdev_priv(dev);
fecp = (volatile fec_t*)dev->base_addr;
@@ -318,6 +326,7 @@ fec_enet_start_xmit(struct sk_buff *skb, struct net_device *dev)
return 1;
}
+ spin_lock_irqsave(&fep->hw_lock, flags);
/* Fill in a Tx ring entry */
bdp = fep->cur_tx;
@@ -328,6 +337,7 @@ fec_enet_start_xmit(struct sk_buff *skb, struct net_device *dev)
* This should not happen, since dev->tbusy should be set.
*/
printk("%s: tx queue full!.\n", dev->name);
+ spin_unlock_irqrestore(&fep->hw_lock, flags);
return 1;
}
#endif
@@ -366,8 +376,6 @@ fec_enet_start_xmit(struct sk_buff *skb, struct net_device *dev)
flush_dcache_range((unsigned long)skb->data,
(unsigned long)skb->data + skb->len);
- spin_lock_irq(&fep->lock);
-
/* Send it on its way. Tell FEC it's ready, interrupt when done,
* it's the last BD of the frame, and to put the CRC on the end.
*/
@@ -396,7 +404,7 @@ fec_enet_start_xmit(struct sk_buff *skb, struct net_device *dev)
fep->cur_tx = (cbd_t *)bdp;
- spin_unlock_irq(&fep->lock);
+ spin_unlock_irqrestore(&fep->hw_lock, flags);
return 0;
}
@@ -454,19 +462,20 @@ fec_enet_interrupt(int irq, void * dev_id)
struct net_device *dev = dev_id;
volatile fec_t *fecp;
uint int_events;
- int handled = 0;
+ irqreturn_t ret = IRQ_NONE;
fecp = (volatile fec_t*)dev->base_addr;
/* Get the interrupt events that caused us to be here.
*/
- while ((int_events = fecp->fec_ievent) != 0) {
+ do {
+ int_events = fecp->fec_ievent;
fecp->fec_ievent = int_events;
/* Handle receive event in its own function.
*/
if (int_events & FEC_ENET_RXF) {
- handled = 1;
+ ret = IRQ_HANDLED;
fec_enet_rx(dev);
}
@@ -475,17 +484,18 @@ fec_enet_interrupt(int irq, void * dev_id)
them as part of the transmit process.
*/
if (int_events & FEC_ENET_TXF) {
- handled = 1;
+ ret = IRQ_HANDLED;
fec_enet_tx(dev);
}
if (int_events & FEC_ENET_MII) {
- handled = 1;
+ ret = IRQ_HANDLED;
fec_enet_mii(dev);
}
- }
- return IRQ_RETVAL(handled);
+ } while (int_events);
+
+ return ret;
}
@@ -498,7 +508,7 @@ fec_enet_tx(struct net_device *dev)
struct sk_buff *skb;
fep = netdev_priv(dev);
- spin_lock(&fep->lock);
+ spin_lock_irq(&fep->hw_lock);
bdp = fep->dirty_tx;
while (((status = bdp->cbd_sc) & BD_ENET_TX_READY) == 0) {
@@ -557,7 +567,7 @@ fec_enet_tx(struct net_device *dev)
}
}
fep->dirty_tx = (cbd_t *)bdp;
- spin_unlock(&fep->lock);
+ spin_unlock_irq(&fep->hw_lock);
}
@@ -584,6 +594,8 @@ fec_enet_rx(struct net_device *dev)
fep = netdev_priv(dev);
fecp = (volatile fec_t*)dev->base_addr;
+ spin_lock_irq(&fep->hw_lock);
+
/* First, grab all of the stats for the incoming packet.
* These get messed up if we get called due to a busy condition.
*/
@@ -689,6 +701,8 @@ while (!((status = bdp->cbd_sc) & BD_ENET_RX_EMPTY)) {
*/
fecp->fec_r_des_active = 0;
#endif
+
+ spin_unlock_irq(&fep->hw_lock);
}
@@ -702,11 +716,11 @@ fec_enet_mii(struct net_device *dev)
uint mii_reg;
fep = netdev_priv(dev);
+ spin_lock_irq(&fep->mii_lock);
+
ep = fep->hwp;
mii_reg = ep->fec_mii_data;
- spin_lock(&fep->lock);
-
if ((mip = mii_head) == NULL) {
printk("MII and no head!\n");
goto unlock;
@@ -723,7 +737,7 @@ fec_enet_mii(struct net_device *dev)
ep->fec_mii_data = mip->mii_regval;
unlock:
- spin_unlock(&fep->lock);
+ spin_unlock_irq(&fep->mii_lock);
}
static int
@@ -737,12 +751,11 @@ mii_queue(struct net_device *dev, int regval, void (*func)(uint, struct net_devi
/* Add PHY address to register command.
*/
fep = netdev_priv(dev);
- regval |= fep->phy_addr << 23;
+ spin_lock_irqsave(&fep->mii_lock, flags);
+ regval |= fep->phy_addr << 23;
retval = 0;
- spin_lock_irqsave(&fep->lock,flags);
-
if ((mip = mii_free) != NULL) {
mii_free = mip->mii_next;
mip->mii_regval = regval;
@@ -759,9 +772,8 @@ mii_queue(struct net_device *dev, int regval, void (*func)(uint, struct net_devi
retval = 1;
}
- spin_unlock_irqrestore(&fep->lock,flags);
-
- return(retval);
+ spin_unlock_irqrestore(&fep->mii_lock, flags);
+ return retval;
}
static void mii_do_cmd(struct net_device *dev, const phy_cmd_t *c)
@@ -1222,7 +1234,7 @@ static phy_info_t const * const phy_info[] = {
};
/* ------------------------------------------------------------------------- */
-#if !defined(CONFIG_M532x)
+#ifdef HAVE_mii_link_interrupt
#ifdef CONFIG_RPXCLASSIC
static void
mii_link_interrupt(void *dev_id);
@@ -1362,18 +1374,8 @@ static void __inline__ fec_request_intrs(struct net_device *dev)
unsigned short irq;
} *idp, id[] = {
{ "fec(TXF)", 23 },
- { "fec(TXB)", 24 },
- { "fec(TXFIFO)", 25 },
- { "fec(TXCR)", 26 },
{ "fec(RXF)", 27 },
- { "fec(RXB)", 28 },
{ "fec(MII)", 29 },
- { "fec(LC)", 30 },
- { "fec(HBERR)", 31 },
- { "fec(GRA)", 32 },
- { "fec(EBERR)", 33 },
- { "fec(BABT)", 34 },
- { "fec(BABR)", 35 },
{ NULL },
};
@@ -1533,18 +1535,8 @@ static void __inline__ fec_request_intrs(struct net_device *dev)
unsigned short irq;
} *idp, id[] = {
{ "fec(TXF)", 23 },
- { "fec(TXB)", 24 },
- { "fec(TXFIFO)", 25 },
- { "fec(TXCR)", 26 },
{ "fec(RXF)", 27 },
- { "fec(RXB)", 28 },
{ "fec(MII)", 29 },
- { "fec(LC)", 30 },
- { "fec(HBERR)", 31 },
- { "fec(GRA)", 32 },
- { "fec(EBERR)", 33 },
- { "fec(BABT)", 34 },
- { "fec(BABR)", 35 },
{ NULL },
};
@@ -1660,18 +1652,8 @@ static void __inline__ fec_request_intrs(struct net_device *dev)
unsigned short irq;
} *idp, id[] = {
{ "fec(TXF)", 36 },
- { "fec(TXB)", 37 },
- { "fec(TXFIFO)", 38 },
- { "fec(TXCR)", 39 },
{ "fec(RXF)", 40 },
- { "fec(RXB)", 41 },
{ "fec(MII)", 42 },
- { "fec(LC)", 43 },
- { "fec(HBERR)", 44 },
- { "fec(GRA)", 45 },
- { "fec(EBERR)", 46 },
- { "fec(BABT)", 47 },
- { "fec(BABR)", 48 },
{ NULL },
};
@@ -2126,6 +2108,7 @@ mii_discover_phy(uint mii_reg, struct net_device *dev)
/* This interrupt occurs when the PHY detects a link change.
*/
+#ifdef HAVE_mii_link_interrupt
#ifdef CONFIG_RPXCLASSIC
static void
mii_link_interrupt(void *dev_id)
@@ -2148,6 +2131,7 @@ mii_link_interrupt(int irq, void * dev_id)
return IRQ_HANDLED;
}
+#endif
static int
fec_enet_open(struct net_device *dev)
@@ -2243,13 +2227,13 @@ static void set_multicast_list(struct net_device *dev)
/* Catch all multicast addresses, so set the
* filter to all 1's.
*/
- ep->fec_hash_table_high = 0xffffffff;
- ep->fec_hash_table_low = 0xffffffff;
+ ep->fec_grp_hash_table_high = 0xffffffff;
+ ep->fec_grp_hash_table_low = 0xffffffff;
} else {
/* Clear filter and add the addresses in hash register.
*/
- ep->fec_hash_table_high = 0;
- ep->fec_hash_table_low = 0;
+ ep->fec_grp_hash_table_high = 0;
+ ep->fec_grp_hash_table_low = 0;
dmi = dev->mc_list;
@@ -2280,9 +2264,9 @@ static void set_multicast_list(struct net_device *dev)
hash = (crc >> (32 - HASH_BITS)) & 0x3f;
if (hash > 31)
- ep->fec_hash_table_high |= 1 << (hash - 32);
+ ep->fec_grp_hash_table_high |= 1 << (hash - 32);
else
- ep->fec_hash_table_low |= 1 << hash;
+ ep->fec_grp_hash_table_low |= 1 << hash;
}
}
}
@@ -2332,6 +2316,9 @@ int __init fec_enet_init(struct net_device *dev)
return -ENOMEM;
}
+ spin_lock_init(&fep->hw_lock);
+ spin_lock_init(&fep->mii_lock);
+
/* Create an Ethernet device instance.
*/
fecp = (volatile fec_t *) fec_hw[index];
@@ -2430,11 +2417,15 @@ int __init fec_enet_init(struct net_device *dev)
*/
fec_request_intrs(dev);
- fecp->fec_hash_table_high = 0;
- fecp->fec_hash_table_low = 0;
+ fecp->fec_grp_hash_table_high = 0;
+ fecp->fec_grp_hash_table_low = 0;
fecp->fec_r_buff_size = PKT_MAXBLR_SIZE;
fecp->fec_ecntrl = 2;
fecp->fec_r_des_active = 0;
+#ifndef CONFIG_M5272
+ fecp->fec_hash_table_high = 0;
+ fecp->fec_hash_table_low = 0;
+#endif
dev->base_addr = (unsigned long)fecp;
@@ -2455,8 +2446,7 @@ int __init fec_enet_init(struct net_device *dev)
/* Clear and enable interrupts */
fecp->fec_ievent = 0xffc00000;
- fecp->fec_imask = (FEC_ENET_TXF | FEC_ENET_TXB |
- FEC_ENET_RXF | FEC_ENET_RXB | FEC_ENET_MII);
+ fecp->fec_imask = (FEC_ENET_TXF | FEC_ENET_RXF | FEC_ENET_MII);
/* Queue up command to detect the PHY and initialize the
* remainder of the interface.
@@ -2500,8 +2490,8 @@ fec_restart(struct net_device *dev, int duplex)
/* Reset all multicast.
*/
- fecp->fec_hash_table_high = 0;
- fecp->fec_hash_table_low = 0;
+ fecp->fec_grp_hash_table_high = 0;
+ fecp->fec_grp_hash_table_low = 0;
/* Set maximum receive buffer size.
*/
@@ -2583,8 +2573,7 @@ fec_restart(struct net_device *dev, int duplex)
/* Enable interrupts we wish to service.
*/
- fecp->fec_imask = (FEC_ENET_TXF | FEC_ENET_TXB |
- FEC_ENET_RXF | FEC_ENET_RXB | FEC_ENET_MII);
+ fecp->fec_imask = (FEC_ENET_TXF | FEC_ENET_RXF | FEC_ENET_MII);
}
static void
@@ -2624,7 +2613,7 @@ fec_stop(struct net_device *dev)
static int __init fec_enet_module_init(void)
{
struct net_device *dev;
- int i, j, err;
+ int i, err;
DECLARE_MAC_BUF(mac);
printk("FEC ENET Version 0.2\n");
diff --git a/drivers/net/fec.h b/drivers/net/fec.h
index 1d421606984f..292719daceff 100644
--- a/drivers/net/fec.h
+++ b/drivers/net/fec.h
@@ -88,8 +88,8 @@ typedef struct fec {
unsigned long fec_reserved7[158];
unsigned long fec_addr_low; /* Low 32bits MAC address */
unsigned long fec_addr_high; /* High 16bits MAC address */
- unsigned long fec_hash_table_high; /* High 32bits hash table */
- unsigned long fec_hash_table_low; /* Low 32bits hash table */
+ unsigned long fec_grp_hash_table_high;/* High 32bits hash table */
+ unsigned long fec_grp_hash_table_low; /* Low 32bits hash table */
unsigned long fec_r_des_start; /* Receive descriptor ring */
unsigned long fec_x_des_start; /* Transmit descriptor ring */
unsigned long fec_r_buff_size; /* Maximum receive buff size */
diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c
index 555b70c8b863..f926b5ab3d09 100644
--- a/drivers/net/virtio_net.c
+++ b/drivers/net/virtio_net.c
@@ -41,6 +41,9 @@ struct virtnet_info
struct net_device *dev;
struct napi_struct napi;
+ /* The skb we couldn't send because buffers were full. */
+ struct sk_buff *last_xmit_skb;
+
/* Number of input buffers, and max we've ever had. */
unsigned int num, max;
@@ -142,10 +145,10 @@ drop:
static void try_fill_recv(struct virtnet_info *vi)
{
struct sk_buff *skb;
- struct scatterlist sg[1+MAX_SKB_FRAGS];
+ struct scatterlist sg[2+MAX_SKB_FRAGS];
int num, err;
- sg_init_table(sg, 1+MAX_SKB_FRAGS);
+ sg_init_table(sg, 2+MAX_SKB_FRAGS);
for (;;) {
skb = netdev_alloc_skb(vi->dev, MAX_PACKET_LEN);
if (unlikely(!skb))
@@ -221,23 +224,22 @@ static void free_old_xmit_skbs(struct virtnet_info *vi)
while ((skb = vi->svq->vq_ops->get_buf(vi->svq, &len)) != NULL) {
pr_debug("Sent skb %p\n", skb);
__skb_unlink(skb, &vi->send);
- vi->dev->stats.tx_bytes += len;
+ vi->dev->stats.tx_bytes += skb->len;
vi->dev->stats.tx_packets++;
kfree_skb(skb);
}
}
-static int start_xmit(struct sk_buff *skb, struct net_device *dev)
+static int xmit_skb(struct virtnet_info *vi, struct sk_buff *skb)
{
- struct virtnet_info *vi = netdev_priv(dev);
- int num, err;
- struct scatterlist sg[1+MAX_SKB_FRAGS];
+ int num;
+ struct scatterlist sg[2+MAX_SKB_FRAGS];
struct virtio_net_hdr *hdr;
const unsigned char *dest = ((struct ethhdr *)skb->data)->h_dest;
- sg_init_table(sg, 1+MAX_SKB_FRAGS);
+ sg_init_table(sg, 2+MAX_SKB_FRAGS);
- pr_debug("%s: xmit %p " MAC_FMT "\n", dev->name, skb,
+ pr_debug("%s: xmit %p " MAC_FMT "\n", vi->dev->name, skb,
dest[0], dest[1], dest[2],
dest[3], dest[4], dest[5]);
@@ -272,30 +274,51 @@ static int start_xmit(struct sk_buff *skb, struct net_device *dev)
vnet_hdr_to_sg(sg, skb);
num = skb_to_sgvec(skb, sg+1, 0, skb->len) + 1;
- __skb_queue_head(&vi->send, skb);
+
+ return vi->svq->vq_ops->add_buf(vi->svq, sg, num, 0, skb);
+}
+
+static int start_xmit(struct sk_buff *skb, struct net_device *dev)
+{
+ struct virtnet_info *vi = netdev_priv(dev);
again:
/* Free up any pending old buffers before queueing new ones. */
free_old_xmit_skbs(vi);
- err = vi->svq->vq_ops->add_buf(vi->svq, sg, num, 0, skb);
- if (err) {
- pr_debug("%s: virtio not prepared to send\n", dev->name);
- netif_stop_queue(dev);
-
- /* Activate callback for using skbs: if this returns false it
- * means some were used in the meantime. */
- if (unlikely(!vi->svq->vq_ops->enable_cb(vi->svq))) {
- vi->svq->vq_ops->disable_cb(vi->svq);
- netif_start_queue(dev);
- goto again;
+
+ /* If we has a buffer left over from last time, send it now. */
+ if (vi->last_xmit_skb) {
+ if (xmit_skb(vi, vi->last_xmit_skb) != 0) {
+ /* Drop this skb: we only queue one. */
+ vi->dev->stats.tx_dropped++;
+ kfree_skb(skb);
+ goto stop_queue;
}
- __skb_unlink(skb, &vi->send);
+ vi->last_xmit_skb = NULL;
+ }
- return NETDEV_TX_BUSY;
+ /* Put new one in send queue and do transmit */
+ __skb_queue_head(&vi->send, skb);
+ if (xmit_skb(vi, skb) != 0) {
+ vi->last_xmit_skb = skb;
+ goto stop_queue;
}
+done:
vi->svq->vq_ops->kick(vi->svq);
-
- return 0;
+ return NETDEV_TX_OK;
+
+stop_queue:
+ pr_debug("%s: virtio not prepared to send\n", dev->name);
+ netif_stop_queue(dev);
+
+ /* Activate callback for using skbs: if this returns false it
+ * means some were used in the meantime. */
+ if (unlikely(!vi->svq->vq_ops->enable_cb(vi->svq))) {
+ vi->svq->vq_ops->disable_cb(vi->svq);
+ netif_start_queue(dev);
+ goto again;
+ }
+ goto done;
}
#ifdef CONFIG_NET_POLL_CONTROLLER
@@ -355,17 +378,26 @@ static int virtnet_probe(struct virtio_device *vdev)
SET_NETDEV_DEV(dev, &vdev->dev);
/* Do we support "hardware" checksums? */
- if (csum && vdev->config->feature(vdev, VIRTIO_NET_F_CSUM)) {
+ if (csum && virtio_has_feature(vdev, VIRTIO_NET_F_CSUM)) {
/* This opens up the world of extra features. */
dev->features |= NETIF_F_HW_CSUM|NETIF_F_SG|NETIF_F_FRAGLIST;
- if (gso && vdev->config->feature(vdev, VIRTIO_NET_F_GSO)) {
+ if (gso && virtio_has_feature(vdev, VIRTIO_NET_F_GSO)) {
dev->features |= NETIF_F_TSO | NETIF_F_UFO
| NETIF_F_TSO_ECN | NETIF_F_TSO6;
}
+ /* Individual feature bits: what can host handle? */
+ if (gso && virtio_has_feature(vdev, VIRTIO_NET_F_HOST_TSO4))
+ dev->features |= NETIF_F_TSO;
+ if (gso && virtio_has_feature(vdev, VIRTIO_NET_F_HOST_TSO6))
+ dev->features |= NETIF_F_TSO6;
+ if (gso && virtio_has_feature(vdev, VIRTIO_NET_F_HOST_ECN))
+ dev->features |= NETIF_F_TSO_ECN;
+ if (gso && virtio_has_feature(vdev, VIRTIO_NET_F_HOST_UFO))
+ dev->features |= NETIF_F_UFO;
}
/* Configuration may specify what MAC to use. Otherwise random. */
- if (vdev->config->feature(vdev, VIRTIO_NET_F_MAC)) {
+ if (virtio_has_feature(vdev, VIRTIO_NET_F_MAC)) {
vdev->config->get(vdev,
offsetof(struct virtio_net_config, mac),
dev->dev_addr, dev->addr_len);
@@ -454,7 +486,15 @@ static struct virtio_device_id id_table[] = {
{ 0 },
};
+static unsigned int features[] = {
+ VIRTIO_NET_F_CSUM, VIRTIO_NET_F_GSO, VIRTIO_NET_F_MAC,
+ VIRTIO_NET_F_HOST_TSO4, VIRTIO_NET_F_HOST_UFO, VIRTIO_NET_F_HOST_TSO6,
+ VIRTIO_NET_F_HOST_ECN,
+};
+
static struct virtio_driver virtio_net = {
+ .feature_table = features,
+ .feature_table_size = ARRAY_SIZE(features),
.driver.name = KBUILD_MODNAME,
.driver.owner = THIS_MODULE,
.id_table = id_table,
diff --git a/drivers/pcmcia/au1000_db1x00.c b/drivers/pcmcia/au1000_db1x00.c
index 74e051535d6c..c78d77fd7e3b 100644
--- a/drivers/pcmcia/au1000_db1x00.c
+++ b/drivers/pcmcia/au1000_db1x00.c
@@ -194,7 +194,7 @@ db1x00_pcmcia_configure_socket(struct au1000_pcmcia_socket *skt, struct socket_s
default:
pwr |= SET_VCC_VPP(0,0,sock);
printk("%s: bad Vcc/Vpp (%d:%d)\n",
- __FUNCTION__,
+ __func__,
state->Vcc,
state->Vpp);
break;
@@ -215,7 +215,7 @@ db1x00_pcmcia_configure_socket(struct au1000_pcmcia_socket *skt, struct socket_s
default:
pwr |= SET_VCC_VPP(0,0,sock);
printk("%s: bad Vcc/Vpp (%d:%d)\n",
- __FUNCTION__,
+ __func__,
state->Vcc,
state->Vpp);
break;
@@ -224,7 +224,7 @@ db1x00_pcmcia_configure_socket(struct au1000_pcmcia_socket *skt, struct socket_s
default: /* what's this ? */
pwr |= SET_VCC_VPP(0,0,sock);
printk(KERN_ERR "%s: bad Vcc %d\n",
- __FUNCTION__, state->Vcc);
+ __func__, state->Vcc);
break;
}
diff --git a/drivers/pcmcia/au1000_generic.c b/drivers/pcmcia/au1000_generic.c
index b693367d38cd..75e8f8505e47 100644
--- a/drivers/pcmcia/au1000_generic.c
+++ b/drivers/pcmcia/au1000_generic.c
@@ -41,6 +41,7 @@
#include <linux/notifier.h>
#include <linux/interrupt.h>
#include <linux/spinlock.h>
+#include <linux/mutex.h>
#include <linux/platform_device.h>
#include <asm/io.h>
@@ -71,7 +72,7 @@ extern struct au1000_pcmcia_socket au1000_pcmcia_socket[];
u32 *pcmcia_base_vaddrs[2];
extern const unsigned long mips_io_port_base;
-DECLARE_MUTEX(pcmcia_sockets_lock);
+static DEFINE_MUTEX(pcmcia_sockets_lock);
static int (*au1x00_pcmcia_hw_init[])(struct device *dev) = {
au1x_board_init,
@@ -472,7 +473,7 @@ int au1x00_drv_pcmcia_remove(struct device *dev)
struct skt_dev_info *sinfo = dev_get_drvdata(dev);
int i;
- down(&pcmcia_sockets_lock);
+ mutex_lock(&pcmcia_sockets_lock);
dev_set_drvdata(dev, NULL);
for (i = 0; i < sinfo->nskt; i++) {
@@ -488,7 +489,7 @@ int au1x00_drv_pcmcia_remove(struct device *dev)
}
kfree(sinfo);
- up(&pcmcia_sockets_lock);
+ mutex_unlock(&pcmcia_sockets_lock);
return 0;
}
@@ -501,13 +502,13 @@ static int au1x00_drv_pcmcia_probe(struct device *dev)
{
int i, ret = -ENODEV;
- down(&pcmcia_sockets_lock);
+ mutex_lock(&pcmcia_sockets_lock);
for (i=0; i < ARRAY_SIZE(au1x00_pcmcia_hw_init); i++) {
ret = au1x00_pcmcia_hw_init[i](dev);
if (ret == 0)
break;
}
- up(&pcmcia_sockets_lock);
+ mutex_unlock(&pcmcia_sockets_lock);
return ret;
}
diff --git a/drivers/pcmcia/au1000_pb1x00.c b/drivers/pcmcia/au1000_pb1x00.c
index 86c0808d6a05..157e41423a0a 100644
--- a/drivers/pcmcia/au1000_pb1x00.c
+++ b/drivers/pcmcia/au1000_pb1x00.c
@@ -244,7 +244,7 @@ pb1x00_pcmcia_configure_socket(const struct pcmcia_configure *configure)
pcr |= SET_VCC_VPP(VCC_HIZ,VPP_HIZ,
configure->sock);
printk("%s: bad Vcc/Vpp (%d:%d)\n",
- __FUNCTION__,
+ __func__,
configure->vcc,
configure->vpp);
break;
@@ -272,7 +272,7 @@ pb1x00_pcmcia_configure_socket(const struct pcmcia_configure *configure)
pcr |= SET_VCC_VPP(VCC_HIZ,VPP_HIZ,
configure->sock);
printk("%s: bad Vcc/Vpp (%d:%d)\n",
- __FUNCTION__,
+ __func__,
configure->vcc,
configure->vpp);
break;
@@ -300,7 +300,7 @@ pb1x00_pcmcia_configure_socket(const struct pcmcia_configure *configure)
pcr |= SET_VCC_VPP(VCC_HIZ,VPP_HIZ,
configure->sock);
printk("%s: bad Vcc/Vpp (%d:%d)\n",
- __FUNCTION__,
+ __func__,
configure->vcc,
configure->vpp);
break;
@@ -309,7 +309,7 @@ pb1x00_pcmcia_configure_socket(const struct pcmcia_configure *configure)
default: /* what's this ? */
pcr |= SET_VCC_VPP(VCC_HIZ,VPP_HIZ,configure->sock);
printk(KERN_ERR "%s: bad Vcc %d\n",
- __FUNCTION__, configure->vcc);
+ __func__, configure->vcc);
break;
}
@@ -353,7 +353,7 @@ pb1x00_pcmcia_configure_socket(const struct pcmcia_configure *configure)
default:
pcr |= SET_VCC_VPP(0,0);
printk("%s: bad Vcc/Vpp (%d:%d)\n",
- __FUNCTION__,
+ __func__,
configure->vcc,
configure->vpp);
break;
@@ -374,7 +374,7 @@ pb1x00_pcmcia_configure_socket(const struct pcmcia_configure *configure)
default:
pcr |= SET_VCC_VPP(0,0);
printk("%s: bad Vcc/Vpp (%d:%d)\n",
- __FUNCTION__,
+ __func__,
configure->vcc,
configure->vpp);
break;
@@ -383,7 +383,7 @@ pb1x00_pcmcia_configure_socket(const struct pcmcia_configure *configure)
default: /* what's this ? */
pcr |= SET_VCC_VPP(0,0);
printk(KERN_ERR "%s: bad Vcc %d\n",
- __FUNCTION__, configure->vcc);
+ __func__, configure->vcc);
break;
}
diff --git a/drivers/pcmcia/au1000_xxs1500.c b/drivers/pcmcia/au1000_xxs1500.c
index ce9d5c44a7b5..c78ed5347510 100644
--- a/drivers/pcmcia/au1000_xxs1500.c
+++ b/drivers/pcmcia/au1000_xxs1500.c
@@ -56,7 +56,7 @@
#define PCMCIA_IRQ AU1000_GPIO_4
#if 0
-#define DEBUG(x,args...) printk(__FUNCTION__ ": " x,##args)
+#define DEBUG(x, args...) printk(__func__ ": " x, ##args)
#else
#define DEBUG(x,args...)
#endif
diff --git a/drivers/pcmcia/cardbus.c b/drivers/pcmcia/cardbus.c
index 714baaeb6da1..fb2f38dc92c5 100644
--- a/drivers/pcmcia/cardbus.c
+++ b/drivers/pcmcia/cardbus.c
@@ -209,7 +209,7 @@ static void cardbus_assign_irqs(struct pci_bus *bus, int irq)
}
}
-int cb_alloc(struct pcmcia_socket * s)
+int __ref cb_alloc(struct pcmcia_socket * s)
{
struct pci_bus *bus = s->cb_dev->subordinate;
struct pci_dev *dev;
diff --git a/drivers/pcmcia/ds.c b/drivers/pcmcia/ds.c
index 5a85871f5ee9..e40775443d04 100644
--- a/drivers/pcmcia/ds.c
+++ b/drivers/pcmcia/ds.c
@@ -1520,7 +1520,7 @@ static void pcmcia_bus_remove_socket(struct device *dev,
/* the pcmcia_bus_interface is used to handle pcmcia socket devices */
-static struct class_interface pcmcia_bus_interface = {
+static struct class_interface pcmcia_bus_interface __refdata = {
.class = &pcmcia_socket_class,
.add_dev = &pcmcia_bus_add_socket,
.remove_dev = &pcmcia_bus_remove_socket,
diff --git a/drivers/pcmcia/i82092.c b/drivers/pcmcia/i82092.c
index e54ecc580d9e..e13618656ff7 100644
--- a/drivers/pcmcia/i82092.c
+++ b/drivers/pcmcia/i82092.c
@@ -53,7 +53,7 @@ static int i82092aa_socket_resume (struct pci_dev *dev)
}
#endif
-static struct pci_driver i82092aa_pci_drv = {
+static struct pci_driver i82092aa_pci_driver = {
.name = "i82092aa",
.id_table = i82092aa_pci_ids,
.probe = i82092aa_pci_probe,
@@ -714,13 +714,13 @@ static int i82092aa_set_mem_map(struct pcmcia_socket *socket, struct pccard_mem_
static int i82092aa_module_init(void)
{
- return pci_register_driver(&i82092aa_pci_drv);
+ return pci_register_driver(&i82092aa_pci_driver);
}
static void i82092aa_module_exit(void)
{
enter("i82092aa_module_exit");
- pci_unregister_driver(&i82092aa_pci_drv);
+ pci_unregister_driver(&i82092aa_pci_driver);
if (sockets[0].io_base>0)
release_region(sockets[0].io_base, 2);
leave("i82092aa_module_exit");
diff --git a/drivers/pcmcia/omap_cf.c b/drivers/pcmcia/omap_cf.c
index bb6db3a582b2..46314b420765 100644
--- a/drivers/pcmcia/omap_cf.c
+++ b/drivers/pcmcia/omap_cf.c
@@ -153,7 +153,7 @@ omap_cf_set_socket(struct pcmcia_socket *sock, struct socket_state_t *s)
static int omap_cf_ss_suspend(struct pcmcia_socket *s)
{
- pr_debug("%s: %s\n", driver_name, __FUNCTION__);
+ pr_debug("%s: %s\n", driver_name, __func__);
return omap_cf_set_socket(s, &dead_socket);
}
diff --git a/drivers/pcmcia/pd6729.c b/drivers/pcmcia/pd6729.c
index abc10fe49bd8..8bed1dab9039 100644
--- a/drivers/pcmcia/pd6729.c
+++ b/drivers/pcmcia/pd6729.c
@@ -778,7 +778,7 @@ static struct pci_device_id pd6729_pci_ids[] = {
};
MODULE_DEVICE_TABLE(pci, pd6729_pci_ids);
-static struct pci_driver pd6729_pci_drv = {
+static struct pci_driver pd6729_pci_driver = {
.name = "pd6729",
.id_table = pd6729_pci_ids,
.probe = pd6729_pci_probe,
@@ -791,12 +791,12 @@ static struct pci_driver pd6729_pci_drv = {
static int pd6729_module_init(void)
{
- return pci_register_driver(&pd6729_pci_drv);
+ return pci_register_driver(&pd6729_pci_driver);
}
static void pd6729_module_exit(void)
{
- pci_unregister_driver(&pd6729_pci_drv);
+ pci_unregister_driver(&pd6729_pci_driver);
}
module_init(pd6729_module_init);
diff --git a/drivers/pcmcia/pxa2xx_lubbock.c b/drivers/pcmcia/pxa2xx_lubbock.c
index 4a05802213c8..881ec8a8e389 100644
--- a/drivers/pcmcia/pxa2xx_lubbock.c
+++ b/drivers/pcmcia/pxa2xx_lubbock.c
@@ -87,7 +87,7 @@ lubbock_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
default:
printk(KERN_ERR "%s(): unrecognized Vcc %u\n",
- __FUNCTION__, state->Vcc);
+ __func__, state->Vcc);
ret = -1;
}
@@ -104,7 +104,7 @@ lubbock_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
pa_dwr_set |= GPIO_A0;
else {
printk(KERN_ERR "%s(): unrecognized Vpp %u\n",
- __FUNCTION__, state->Vpp);
+ __func__, state->Vpp);
ret = -1;
break;
}
@@ -128,14 +128,14 @@ lubbock_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
default:
printk(KERN_ERR "%s(): unrecognized Vcc %u\n",
- __FUNCTION__, state->Vcc);
+ __func__, state->Vcc);
ret = -1;
break;
}
if (state->Vpp != state->Vcc && state->Vpp != 0) {
printk(KERN_ERR "%s(): CF slot cannot support Vpp %u\n",
- __FUNCTION__, state->Vpp);
+ __func__, state->Vpp);
ret = -1;
break;
}
diff --git a/drivers/pcmcia/pxa2xx_mainstone.c b/drivers/pcmcia/pxa2xx_mainstone.c
index 6fa5eaaab8af..145b85e0f02c 100644
--- a/drivers/pcmcia/pxa2xx_mainstone.c
+++ b/drivers/pcmcia/pxa2xx_mainstone.c
@@ -99,7 +99,7 @@ static int mst_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
case 50: power |= MST_PCMCIA_PWR_VCC_50; break;
default:
printk(KERN_ERR "%s(): bad Vcc %u\n",
- __FUNCTION__, state->Vcc);
+ __func__, state->Vcc);
ret = -1;
}
@@ -111,7 +111,7 @@ static int mst_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
power |= MST_PCMCIA_PWR_VPP_VCC;
} else {
printk(KERN_ERR "%s(): bad Vpp %u\n",
- __FUNCTION__, state->Vpp);
+ __func__, state->Vpp);
ret = -1;
}
}
diff --git a/drivers/pcmcia/rsrc_nonstatic.c b/drivers/pcmcia/rsrc_nonstatic.c
index a8d100707721..0fcf763b9175 100644
--- a/drivers/pcmcia/rsrc_nonstatic.c
+++ b/drivers/pcmcia/rsrc_nonstatic.c
@@ -1045,7 +1045,7 @@ static void __devexit pccard_sysfs_remove_rsrc(struct device *dev,
device_remove_file(dev, *attr);
}
-static struct class_interface pccard_rsrc_interface = {
+static struct class_interface pccard_rsrc_interface __refdata = {
.class = &pcmcia_socket_class,
.add_dev = &pccard_sysfs_add_rsrc,
.remove_dev = __devexit_p(&pccard_sysfs_remove_rsrc),
diff --git a/drivers/pcmcia/sa1100_assabet.c b/drivers/pcmcia/sa1100_assabet.c
index 7c57fdd3c8d7..ce133ce81c10 100644
--- a/drivers/pcmcia/sa1100_assabet.c
+++ b/drivers/pcmcia/sa1100_assabet.c
@@ -66,14 +66,14 @@ assabet_pcmcia_configure_socket(struct soc_pcmcia_socket *skt, const socket_stat
case 50:
printk(KERN_WARNING "%s(): CS asked for 5V, applying 3.3V...\n",
- __FUNCTION__);
+ __func__);
case 33: /* Can only apply 3.3V to the CF slot. */
mask = ASSABET_BCR_CF_PWR;
break;
default:
- printk(KERN_ERR "%s(): unrecognized Vcc %u\n", __FUNCTION__,
+ printk(KERN_ERR "%s(): unrecognized Vcc %u\n", __func__,
state->Vcc);
return -1;
}
diff --git a/drivers/pcmcia/sa1100_badge4.c b/drivers/pcmcia/sa1100_badge4.c
index 62bfc7566ec2..607c3f326eca 100644
--- a/drivers/pcmcia/sa1100_badge4.c
+++ b/drivers/pcmcia/sa1100_badge4.c
@@ -82,14 +82,14 @@ badge4_pcmcia_configure_socket(struct soc_pcmcia_socket *skt, const socket_state
case 0:
if ((state->Vcc != 0) &&
(state->Vcc != badge4_pcmvcc)) {
- complain_about_jumpering(__FUNCTION__, "pcmvcc",
+ complain_about_jumpering(__func__, "pcmvcc",
badge4_pcmvcc, state->Vcc);
// Apply power regardless of the jumpering.
// return -1;
}
if ((state->Vpp != 0) &&
(state->Vpp != badge4_pcmvpp)) {
- complain_about_jumpering(__FUNCTION__, "pcmvpp",
+ complain_about_jumpering(__func__, "pcmvpp",
badge4_pcmvpp, state->Vpp);
return -1;
}
@@ -98,7 +98,7 @@ badge4_pcmcia_configure_socket(struct soc_pcmcia_socket *skt, const socket_state
case 1:
if ((state->Vcc != 0) &&
(state->Vcc != badge4_cfvcc)) {
- complain_about_jumpering(__FUNCTION__, "cfvcc",
+ complain_about_jumpering(__func__, "cfvcc",
badge4_cfvcc, state->Vcc);
return -1;
}
@@ -143,7 +143,7 @@ int pcmcia_badge4_init(struct device *dev)
if (machine_is_badge4()) {
printk(KERN_INFO
"%s: badge4_pcmvcc=%d, badge4_pcmvpp=%d, badge4_cfvcc=%d\n",
- __FUNCTION__,
+ __func__,
badge4_pcmvcc, badge4_pcmvpp, badge4_cfvcc);
ret = sa11xx_drv_pcmcia_probe(dev, &badge4_pcmcia_ops, 0, 2);
diff --git a/drivers/pcmcia/sa1100_cerf.c b/drivers/pcmcia/sa1100_cerf.c
index 549a1529fe35..7c3951a2675d 100644
--- a/drivers/pcmcia/sa1100_cerf.c
+++ b/drivers/pcmcia/sa1100_cerf.c
@@ -63,7 +63,7 @@ cerf_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
default:
printk(KERN_ERR "%s(): unrecognized Vcc %u\n",
- __FUNCTION__, state->Vcc);
+ __func__, state->Vcc);
return -1;
}
diff --git a/drivers/pcmcia/sa1100_jornada720.c b/drivers/pcmcia/sa1100_jornada720.c
index 6284c35dabc6..2167e6714d2d 100644
--- a/drivers/pcmcia/sa1100_jornada720.c
+++ b/drivers/pcmcia/sa1100_jornada720.c
@@ -42,7 +42,7 @@ jornada720_pcmcia_configure_socket(struct soc_pcmcia_socket *skt, const socket_s
unsigned int pa_dwr_mask, pa_dwr_set;
int ret;
-printk("%s(): config socket %d vcc %d vpp %d\n", __FUNCTION__,
+printk("%s(): config socket %d vcc %d vpp %d\n", __func__,
skt->nr, state->Vcc, state->Vpp);
switch (skt->nr) {
@@ -74,7 +74,7 @@ printk("%s(): config socket %d vcc %d vpp %d\n", __FUNCTION__,
if (state->Vpp != state->Vcc && state->Vpp != 0) {
printk(KERN_ERR "%s(): slot cannot support VPP %u\n",
- __FUNCTION__, state->Vpp);
+ __func__, state->Vpp);
return -1;
}
diff --git a/drivers/pcmcia/sa1100_neponset.c b/drivers/pcmcia/sa1100_neponset.c
index 5bc9e9532b9d..687492fcd5b4 100644
--- a/drivers/pcmcia/sa1100_neponset.c
+++ b/drivers/pcmcia/sa1100_neponset.c
@@ -59,7 +59,7 @@ neponset_pcmcia_configure_socket(struct soc_pcmcia_socket *skt, const socket_sta
ncr_set = NCR_A0VPP;
else {
printk(KERN_ERR "%s(): unrecognized VPP %u\n",
- __FUNCTION__, state->Vpp);
+ __func__, state->Vpp);
return -1;
}
break;
@@ -71,7 +71,7 @@ neponset_pcmcia_configure_socket(struct soc_pcmcia_socket *skt, const socket_sta
if (state->Vpp != state->Vcc && state->Vpp != 0) {
printk(KERN_ERR "%s(): CF slot cannot support VPP %u\n",
- __FUNCTION__, state->Vpp);
+ __func__, state->Vpp);
return -1;
}
break;
diff --git a/drivers/pcmcia/sa1100_shannon.c b/drivers/pcmcia/sa1100_shannon.c
index 9456f5478d09..494912fccc0d 100644
--- a/drivers/pcmcia/sa1100_shannon.c
+++ b/drivers/pcmcia/sa1100_shannon.c
@@ -73,19 +73,19 @@ shannon_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
{
switch (state->Vcc) {
case 0: /* power off */
- printk(KERN_WARNING "%s(): CS asked for 0V, still applying 3.3V..\n", __FUNCTION__);
+ printk(KERN_WARNING "%s(): CS asked for 0V, still applying 3.3V..\n", __func__);
break;
case 50:
- printk(KERN_WARNING "%s(): CS asked for 5V, applying 3.3V..\n", __FUNCTION__);
+ printk(KERN_WARNING "%s(): CS asked for 5V, applying 3.3V..\n", __func__);
case 33:
break;
default:
printk(KERN_ERR "%s(): unrecognized Vcc %u\n",
- __FUNCTION__, state->Vcc);
+ __func__, state->Vcc);
return -1;
}
- printk(KERN_WARNING "%s(): Warning, Can't perform reset\n", __FUNCTION__);
+ printk(KERN_WARNING "%s(): Warning, Can't perform reset\n", __func__);
/* Silently ignore Vpp, output enable, speaker enable. */
diff --git a/drivers/pcmcia/sa1100_simpad.c b/drivers/pcmcia/sa1100_simpad.c
index 04d6f7f75f78..42567de894b9 100644
--- a/drivers/pcmcia/sa1100_simpad.c
+++ b/drivers/pcmcia/sa1100_simpad.c
@@ -90,7 +90,7 @@ simpad_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
default:
printk(KERN_ERR "%s(): unrecognized Vcc %u\n",
- __FUNCTION__, state->Vcc);
+ __func__, state->Vcc);
clear_cs3_bit(VCC_3V_EN|VCC_5V_EN|EN0|EN1);
local_irq_restore(flags);
return -1;
diff --git a/drivers/pcmcia/soc_common.c b/drivers/pcmcia/soc_common.c
index aa7779d89752..420a77540f41 100644
--- a/drivers/pcmcia/soc_common.c
+++ b/drivers/pcmcia/soc_common.c
@@ -37,6 +37,7 @@
#include <linux/kernel.h>
#include <linux/timer.h>
#include <linux/mm.h>
+#include <linux/mutex.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/spinlock.h>
@@ -353,7 +354,7 @@ soc_common_pcmcia_set_io_map(struct pcmcia_socket *sock, struct pccard_io_map *m
(map->flags&MAP_PREFETCH)?"PREFETCH ":"");
if (map->map >= MAX_IO_WIN) {
- printk(KERN_ERR "%s(): map (%d) out of range\n", __FUNCTION__,
+ printk(KERN_ERR "%s(): map (%d) out of range\n", __func__,
map->map);
return -1;
}
@@ -578,7 +579,7 @@ EXPORT_SYMBOL(soc_pcmcia_enable_irqs);
LIST_HEAD(soc_pcmcia_sockets);
-DECLARE_MUTEX(soc_pcmcia_sockets_lock);
+static DEFINE_MUTEX(soc_pcmcia_sockets_lock);
static const char *skt_names[] = {
"PCMCIA socket 0",
@@ -601,11 +602,11 @@ soc_pcmcia_notifier(struct notifier_block *nb, unsigned long val, void *data)
struct cpufreq_freqs *freqs = data;
int ret = 0;
- down(&soc_pcmcia_sockets_lock);
+ mutex_lock(&soc_pcmcia_sockets_lock);
list_for_each_entry(skt, &soc_pcmcia_sockets, node)
if ( skt->ops->frequency_change )
ret += skt->ops->frequency_change(skt, val, freqs);
- up(&soc_pcmcia_sockets_lock);
+ mutex_unlock(&soc_pcmcia_sockets_lock);
return ret;
}
@@ -642,7 +643,7 @@ int soc_common_drv_pcmcia_probe(struct device *dev, struct pcmcia_low_level *ops
struct soc_pcmcia_socket *skt;
int ret, i;
- down(&soc_pcmcia_sockets_lock);
+ mutex_lock(&soc_pcmcia_sockets_lock);
sinfo = kzalloc(SKT_DEV_INFO_SIZE(nr), GFP_KERNEL);
if (!sinfo) {
@@ -782,7 +783,7 @@ int soc_common_drv_pcmcia_probe(struct device *dev, struct pcmcia_low_level *ops
kfree(sinfo);
out:
- up(&soc_pcmcia_sockets_lock);
+ mutex_unlock(&soc_pcmcia_sockets_lock);
return ret;
}
@@ -793,7 +794,7 @@ int soc_common_drv_pcmcia_remove(struct device *dev)
dev_set_drvdata(dev, NULL);
- down(&soc_pcmcia_sockets_lock);
+ mutex_lock(&soc_pcmcia_sockets_lock);
for (i = 0; i < sinfo->nskt; i++) {
struct soc_pcmcia_socket *skt = &sinfo->skt[i];
@@ -818,7 +819,7 @@ int soc_common_drv_pcmcia_remove(struct device *dev)
if (list_empty(&soc_pcmcia_sockets))
soc_pcmcia_cpufreq_unregister();
- up(&soc_pcmcia_sockets_lock);
+ mutex_unlock(&soc_pcmcia_sockets_lock);
kfree(sinfo);
diff --git a/drivers/pcmcia/soc_common.h b/drivers/pcmcia/soc_common.h
index 6f14126889b3..1edc1da9d353 100644
--- a/drivers/pcmcia/soc_common.h
+++ b/drivers/pcmcia/soc_common.h
@@ -133,7 +133,6 @@ extern void soc_common_pcmcia_get_timing(struct soc_pcmcia_socket *, struct soc_
extern struct list_head soc_pcmcia_sockets;
-extern struct semaphore soc_pcmcia_sockets_lock;
extern int soc_common_drv_pcmcia_probe(struct device *dev, struct pcmcia_low_level *ops, int first, int nr);
extern int soc_common_drv_pcmcia_remove(struct device *dev);
diff --git a/drivers/pnp/pnpbios/rsparser.c b/drivers/pnp/pnpbios/rsparser.c
index 2e2c457a0fea..5ff9a4c0447e 100644
--- a/drivers/pnp/pnpbios/rsparser.c
+++ b/drivers/pnp/pnpbios/rsparser.c
@@ -591,7 +591,8 @@ static void pnpbios_encode_irq(struct pnp_dev *dev, unsigned char *p,
p[1] = map & 0xff;
p[2] = (map >> 8) & 0xff;
- dev_dbg(&dev->dev, " encode irq %d\n", res->start);
+ dev_dbg(&dev->dev, " encode irq %llu\n",
+ (unsigned long long)res->start);
}
static void pnpbios_encode_dma(struct pnp_dev *dev, unsigned char *p,
@@ -602,7 +603,8 @@ static void pnpbios_encode_dma(struct pnp_dev *dev, unsigned char *p,
map = 1 << res->start;
p[1] = map & 0xff;
- dev_dbg(&dev->dev, " encode dma %d\n", res->start);
+ dev_dbg(&dev->dev, " encode dma %llu\n",
+ (unsigned long long)res->start);
}
static void pnpbios_encode_port(struct pnp_dev *dev, unsigned char *p,
diff --git a/drivers/scsi/mvsas.c b/drivers/scsi/mvsas.c
index e55b9037adb2..1dd70d7a4947 100644
--- a/drivers/scsi/mvsas.c
+++ b/drivers/scsi/mvsas.c
@@ -2822,7 +2822,9 @@ static void mvs_update_phyinfo(struct mvs_info *mvi, int i,
dev_printk(KERN_DEBUG, &pdev->dev,
"phy[%d] Get Attached Address 0x%llX ,"
" SAS Address 0x%llX\n",
- i, phy->att_dev_sas_addr, phy->dev_sas_addr);
+ i,
+ (unsigned long long)phy->att_dev_sas_addr,
+ (unsigned long long)phy->dev_sas_addr);
dev_printk(KERN_DEBUG, &pdev->dev,
"Rate = %x , type = %d\n",
sas_phy->linkrate, phy->phy_type);
diff --git a/drivers/scsi/ncr53c8xx.c b/drivers/scsi/ncr53c8xx.c
index ceab4f73caf1..c57c94c0ffd2 100644
--- a/drivers/scsi/ncr53c8xx.c
+++ b/drivers/scsi/ncr53c8xx.c
@@ -8222,7 +8222,7 @@ static void process_waiting_list(struct ncb *np, int sts)
#ifdef DEBUG_WAITING_LIST
if (waiting_list) printk("%s: waiting_list=%lx processing sts=%d\n", ncr_name(np), (u_long) waiting_list, sts);
#endif
- while (wcmd = waiting_list) {
+ while ((wcmd = waiting_list) != NULL) {
waiting_list = (struct scsi_cmnd *) wcmd->next_wcmd;
wcmd->next_wcmd = NULL;
if (sts == DID_OK) {
diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c
index ea41f2626458..a1ca9b7bf2d5 100644
--- a/drivers/serial/8250.c
+++ b/drivers/serial/8250.c
@@ -2271,7 +2271,8 @@ static int serial8250_request_std_resource(struct uart_8250_port *up)
}
if (up->port.flags & UPF_IOREMAP) {
- up->port.membase = ioremap(up->port.mapbase, size);
+ up->port.membase = ioremap_nocache(up->port.mapbase,
+ size);
if (!up->port.membase) {
release_mem_region(up->port.mapbase, size);
ret = -ENOMEM;
diff --git a/drivers/serial/8250_early.c b/drivers/serial/8250_early.c
index cd898704ba4f..f279745e9fef 100644
--- a/drivers/serial/8250_early.c
+++ b/drivers/serial/8250_early.c
@@ -153,7 +153,7 @@ static int __init parse_options(struct early_serial8250_device *device,
(void __iomem *)__fix_to_virt(FIX_EARLYCON_MEM_BASE);
port->membase += port->mapbase & ~PAGE_MASK;
#else
- port->membase = ioremap(port->mapbase, 64);
+ port->membase = ioremap_nocache(port->mapbase, 64);
if (!port->membase) {
printk(KERN_ERR "%s: Couldn't ioremap 0x%llx\n",
__func__,
diff --git a/drivers/serial/8250_pci.c b/drivers/serial/8250_pci.c
index 6e57382b9137..53fa19cf2f06 100644
--- a/drivers/serial/8250_pci.c
+++ b/drivers/serial/8250_pci.c
@@ -86,7 +86,7 @@ setup_port(struct serial_private *priv, struct uart_port *port,
len = pci_resource_len(dev, bar);
if (!priv->remapped_bar[bar])
- priv->remapped_bar[bar] = ioremap(base, len);
+ priv->remapped_bar[bar] = ioremap_nocache(base, len);
if (!priv->remapped_bar[bar])
return -ENOMEM;
@@ -270,7 +270,7 @@ static int pci_plx9050_init(struct pci_dev *dev)
/*
* enable/disable interrupts
*/
- p = ioremap(pci_resource_start(dev, 0), 0x80);
+ p = ioremap_nocache(pci_resource_start(dev, 0), 0x80);
if (p == NULL)
return -ENOMEM;
writel(irq_config, p + 0x4c);
@@ -294,7 +294,7 @@ static void __devexit pci_plx9050_exit(struct pci_dev *dev)
/*
* disable interrupts
*/
- p = ioremap(pci_resource_start(dev, 0), 0x80);
+ p = ioremap_nocache(pci_resource_start(dev, 0), 0x80);
if (p != NULL) {
writel(0, p + 0x4c);
@@ -341,7 +341,8 @@ static int sbs_init(struct pci_dev *dev)
{
u8 __iomem *p;
- p = ioremap(pci_resource_start(dev, 0), pci_resource_len(dev, 0));
+ p = ioremap_nocache(pci_resource_start(dev, 0),
+ pci_resource_len(dev, 0));
if (p == NULL)
return -ENOMEM;
@@ -365,7 +366,8 @@ static void __devexit sbs_exit(struct pci_dev *dev)
{
u8 __iomem *p;
- p = ioremap(pci_resource_start(dev, 0), pci_resource_len(dev, 0));
+ p = ioremap_nocache(pci_resource_start(dev, 0),
+ pci_resource_len(dev, 0));
/* FIXME: What if resource_len < OCT_REG_CR_OFF */
if (p != NULL)
writeb(0, p + OCT_REG_CR_OFF);
@@ -419,7 +421,7 @@ static int pci_siig10x_init(struct pci_dev *dev)
break;
}
- p = ioremap(pci_resource_start(dev, 0), 0x80);
+ p = ioremap_nocache(pci_resource_start(dev, 0), 0x80);
if (p == NULL)
return -ENOMEM;
diff --git a/drivers/serial/jsm/jsm.h b/drivers/serial/jsm/jsm.h
index 12c934a1f274..8871aaa3dba6 100644
--- a/drivers/serial/jsm/jsm.h
+++ b/drivers/serial/jsm/jsm.h
@@ -373,6 +373,7 @@ struct neo_uart_struct {
#define PCI_DEVICE_NEO_2DB9PRI_PCI_NAME "Neo 2 - DB9 Universal PCI - Powered Ring Indicator"
#define PCI_DEVICE_NEO_2RJ45_PCI_NAME "Neo 2 - RJ45 Universal PCI"
#define PCI_DEVICE_NEO_2RJ45PRI_PCI_NAME "Neo 2 - RJ45 Universal PCI - Powered Ring Indicator"
+#define PCIE_DEVICE_NEO_IBM_PCI_NAME "Neo 4 - PCI Express - IBM"
/*
* Our Global Variables.
diff --git a/drivers/serial/jsm/jsm_driver.c b/drivers/serial/jsm/jsm_driver.c
index 6767ee381cd1..338cf8a08b43 100644
--- a/drivers/serial/jsm/jsm_driver.c
+++ b/drivers/serial/jsm/jsm_driver.c
@@ -82,7 +82,10 @@ static int jsm_probe_one(struct pci_dev *pdev, const struct pci_device_id *ent)
/* store the info for the board we've found */
brd->boardnum = adapter_count++;
brd->pci_dev = pdev;
- brd->maxports = 2;
+ if (pdev->device == PCIE_DEVICE_ID_NEO_4_IBM)
+ brd->maxports = 4;
+ else
+ brd->maxports = 2;
spin_lock_init(&brd->bd_lock);
spin_lock_init(&brd->bd_intr_lock);
@@ -208,6 +211,7 @@ static struct pci_device_id jsm_pci_tbl[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_DIGI, PCI_DEVICE_ID_NEO_2DB9PRI), 0, 0, 1 },
{ PCI_DEVICE(PCI_VENDOR_ID_DIGI, PCI_DEVICE_ID_NEO_2RJ45), 0, 0, 2 },
{ PCI_DEVICE(PCI_VENDOR_ID_DIGI, PCI_DEVICE_ID_NEO_2RJ45PRI), 0, 0, 3 },
+ { PCI_DEVICE(PCI_VENDOR_ID_DIGI, PCIE_DEVICE_ID_NEO_4_IBM), 0, 0, 4 },
{ 0, }
};
MODULE_DEVICE_TABLE(pci, jsm_pci_tbl);
diff --git a/drivers/spi/spi_bfin5xx.c b/drivers/spi/spi_bfin5xx.c
index a9ac1fdb3094..7fea3cf4588a 100644
--- a/drivers/spi/spi_bfin5xx.c
+++ b/drivers/spi/spi_bfin5xx.c
@@ -608,6 +608,7 @@ static void pump_transfers(unsigned long data)
u8 width;
u16 cr, dma_width, dma_config;
u32 tranf_success = 1;
+ u8 full_duplex = 0;
/* Get current state information */
message = drv_data->cur_msg;
@@ -658,6 +659,7 @@ static void pump_transfers(unsigned long data)
}
if (transfer->rx_buf != NULL) {
+ full_duplex = transfer->tx_buf != NULL;
drv_data->rx = transfer->rx_buf;
drv_data->rx_end = drv_data->rx + transfer->len;
dev_dbg(&drv_data->pdev->dev, "rx_buf is %p, rx_end is %p\n",
@@ -740,7 +742,8 @@ static void pump_transfers(unsigned long data)
* successful use different way to r/w according to
* drv_data->cur_chip->enable_dma
*/
- if (drv_data->cur_chip->enable_dma && drv_data->len > 6) {
+ if (!full_duplex && drv_data->cur_chip->enable_dma
+ && drv_data->len > 6) {
disable_dma(drv_data->dma_channel);
clear_dma_irqstat(drv_data->dma_channel);
@@ -828,7 +831,7 @@ static void pump_transfers(unsigned long data)
/* IO mode write then read */
dev_dbg(&drv_data->pdev->dev, "doing IO transfer\n");
- if (drv_data->tx != NULL && drv_data->rx != NULL) {
+ if (full_duplex) {
/* full duplex mode */
BUG_ON((drv_data->tx_end - drv_data->tx) !=
(drv_data->rx_end - drv_data->rx));
diff --git a/drivers/spi/spi_s3c24xx.c b/drivers/spi/spi_s3c24xx.c
index 34bfb7dd7764..0885cc357a37 100644
--- a/drivers/spi/spi_s3c24xx.c
+++ b/drivers/spi/spi_s3c24xx.c
@@ -125,10 +125,10 @@ static int s3c24xx_spi_setupxfer(struct spi_device *spi,
/* is clk = pclk / (2 * (pre+1)), or is it
* clk = (pclk * 2) / ( pre + 1) */
- div = (div / 2) - 1;
+ div /= 2;
- if (div < 0)
- div = 1;
+ if (div > 0)
+ div -= 1;
if (div > 255)
div = 255;
diff --git a/drivers/usb/Makefile b/drivers/usb/Makefile
index 516a6400db43..a419c42e880e 100644
--- a/drivers/usb/Makefile
+++ b/drivers/usb/Makefile
@@ -17,6 +17,8 @@ obj-$(CONFIG_USB_SL811_HCD) += host/
obj-$(CONFIG_USB_U132_HCD) += host/
obj-$(CONFIG_USB_R8A66597_HCD) += host/
+obj-$(CONFIG_USB_C67X00_HCD) += c67x00/
+
obj-$(CONFIG_USB_ACM) += class/
obj-$(CONFIG_USB_PRINTER) += class/
diff --git a/drivers/usb/atm/Kconfig b/drivers/usb/atm/Kconfig
index 86e64035edb0..be0b8daac9c7 100644
--- a/drivers/usb/atm/Kconfig
+++ b/drivers/usb/atm/Kconfig
@@ -19,7 +19,6 @@ if USB_ATM
config USB_SPEEDTOUCH
tristate "Speedtouch USB support"
- depends on USB_ATM
select FW_LOADER
help
Say Y here if you have an SpeedTouch USB or SpeedTouch 330
@@ -32,7 +31,6 @@ config USB_SPEEDTOUCH
config USB_CXACRU
tristate "Conexant AccessRunner USB support"
- depends on USB_ATM
select FW_LOADER
help
Say Y here if you have an ADSL USB modem based on the Conexant
@@ -45,7 +43,6 @@ config USB_CXACRU
config USB_UEAGLEATM
tristate "ADI 930 and eagle USB DSL modem"
- depends on USB_ATM
select FW_LOADER
help
Say Y here if you have an ADSL USB modem based on the ADI 930
@@ -58,7 +55,6 @@ config USB_UEAGLEATM
config USB_XUSBATM
tristate "Other USB DSL modem support"
- depends on USB_ATM
help
Say Y here if you have a DSL USB modem not explicitly supported by
another USB DSL drivers. In order to use your modem you will need to
diff --git a/drivers/usb/c67x00/Makefile b/drivers/usb/c67x00/Makefile
new file mode 100644
index 000000000000..868bc41b5980
--- /dev/null
+++ b/drivers/usb/c67x00/Makefile
@@ -0,0 +1,9 @@
+#
+# Makefile for Cypress C67X00 USB Controller
+#
+
+ccflags-$(CONFIG_USB_DEBUG) += -DDEBUG
+
+obj-$(CONFIG_USB_C67X00_HCD) += c67x00.o
+
+c67x00-objs := c67x00-drv.o c67x00-ll-hpi.o c67x00-hcd.o c67x00-sched.o
diff --git a/drivers/usb/c67x00/c67x00-drv.c b/drivers/usb/c67x00/c67x00-drv.c
new file mode 100644
index 000000000000..5633bc5c8bf2
--- /dev/null
+++ b/drivers/usb/c67x00/c67x00-drv.c
@@ -0,0 +1,243 @@
+/*
+ * c67x00-drv.c: Cypress C67X00 USB Common infrastructure
+ *
+ * Copyright (C) 2006-2008 Barco N.V.
+ * Derived from the Cypress cy7c67200/300 ezusb linux driver and
+ * based on multiple host controller drivers inside the linux kernel.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301 USA.
+ */
+
+/*
+ * This file implements the common infrastructure for using the c67x00.
+ * It is both the link between the platform configuration and subdrivers and
+ * the link between the common hardware parts and the subdrivers (e.g.
+ * interrupt handling).
+ *
+ * The c67x00 has 2 SIE's (serial interface engine) wich can be configured
+ * to be host, device or OTG (with some limitations, E.G. only SIE1 can be OTG).
+ *
+ * Depending on the platform configuration, the SIE's are created and
+ * the corresponding subdriver is initialized (c67x00_probe_sie).
+ */
+
+#include <linux/device.h>
+#include <linux/io.h>
+#include <linux/list.h>
+#include <linux/usb.h>
+#include <linux/usb/c67x00.h>
+
+#include "c67x00.h"
+#include "c67x00-hcd.h"
+
+static void c67x00_probe_sie(struct c67x00_sie *sie,
+ struct c67x00_device *dev, int sie_num)
+{
+ spin_lock_init(&sie->lock);
+ sie->dev = dev;
+ sie->sie_num = sie_num;
+ sie->mode = c67x00_sie_config(dev->pdata->sie_config, sie_num);
+
+ switch (sie->mode) {
+ case C67X00_SIE_HOST:
+ c67x00_hcd_probe(sie);
+ break;
+
+ case C67X00_SIE_UNUSED:
+ dev_info(sie_dev(sie),
+ "Not using SIE %d as requested\n", sie->sie_num);
+ break;
+
+ default:
+ dev_err(sie_dev(sie),
+ "Unsupported configuration: 0x%x for SIE %d\n",
+ sie->mode, sie->sie_num);
+ break;
+ }
+}
+
+static void c67x00_remove_sie(struct c67x00_sie *sie)
+{
+ switch (sie->mode) {
+ case C67X00_SIE_HOST:
+ c67x00_hcd_remove(sie);
+ break;
+
+ default:
+ break;
+ }
+}
+
+static irqreturn_t c67x00_irq(int irq, void *__dev)
+{
+ struct c67x00_device *c67x00 = __dev;
+ struct c67x00_sie *sie;
+ u16 msg, int_status;
+ int i, count = 8;
+
+ int_status = c67x00_ll_hpi_status(c67x00);
+ if (!int_status)
+ return IRQ_NONE;
+
+ while (int_status != 0 && (count-- >= 0)) {
+ c67x00_ll_irq(c67x00, int_status);
+ for (i = 0; i < C67X00_SIES; i++) {
+ sie = &c67x00->sie[i];
+ msg = 0;
+ if (int_status & SIEMSG_FLG(i))
+ msg = c67x00_ll_fetch_siemsg(c67x00, i);
+ if (sie->irq)
+ sie->irq(sie, int_status, msg);
+ }
+ int_status = c67x00_ll_hpi_status(c67x00);
+ }
+
+ if (int_status)
+ dev_warn(&c67x00->pdev->dev, "Not all interrupts handled! "
+ "status = 0x%04x\n", int_status);
+
+ return IRQ_HANDLED;
+}
+
+/* ------------------------------------------------------------------------- */
+
+static int __devinit c67x00_drv_probe(struct platform_device *pdev)
+{
+ struct c67x00_device *c67x00;
+ struct c67x00_platform_data *pdata;
+ struct resource *res, *res2;
+ int ret, i;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res)
+ return -ENODEV;
+
+ res2 = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+ if (!res2)
+ return -ENODEV;
+
+ pdata = pdev->dev.platform_data;
+ if (!pdata)
+ return -ENODEV;
+
+ c67x00 = kzalloc(sizeof(*c67x00), GFP_KERNEL);
+ if (!c67x00)
+ return -ENOMEM;
+
+ if (!request_mem_region(res->start, res->end - res->start + 1,
+ pdev->name)) {
+ dev_err(&pdev->dev, "Memory region busy\n");
+ ret = -EBUSY;
+ goto request_mem_failed;
+ }
+ c67x00->hpi.base = ioremap(res->start, res->end - res->start + 1);
+ if (!c67x00->hpi.base) {
+ dev_err(&pdev->dev, "Unable to map HPI registers\n");
+ ret = -EIO;
+ goto map_failed;
+ }
+
+ spin_lock_init(&c67x00->hpi.lock);
+ c67x00->hpi.regstep = pdata->hpi_regstep;
+ c67x00->pdata = pdev->dev.platform_data;
+ c67x00->pdev = pdev;
+
+ c67x00_ll_init(c67x00);
+ c67x00_ll_hpi_reg_init(c67x00);
+
+ ret = request_irq(res2->start, c67x00_irq, 0, pdev->name, c67x00);
+ if (ret) {
+ dev_err(&pdev->dev, "Cannot claim IRQ\n");
+ goto request_irq_failed;
+ }
+
+ ret = c67x00_ll_reset(c67x00);
+ if (ret) {
+ dev_err(&pdev->dev, "Device reset failed\n");
+ goto reset_failed;
+ }
+
+ for (i = 0; i < C67X00_SIES; i++)
+ c67x00_probe_sie(&c67x00->sie[i], c67x00, i);
+
+ platform_set_drvdata(pdev, c67x00);
+
+ return 0;
+
+ reset_failed:
+ free_irq(res2->start, c67x00);
+ request_irq_failed:
+ iounmap(c67x00->hpi.base);
+ map_failed:
+ release_mem_region(res->start, res->end - res->start + 1);
+ request_mem_failed:
+ kfree(c67x00);
+
+ return ret;
+}
+
+static int __devexit c67x00_drv_remove(struct platform_device *pdev)
+{
+ struct c67x00_device *c67x00 = platform_get_drvdata(pdev);
+ struct resource *res;
+ int i;
+
+ for (i = 0; i < C67X00_SIES; i++)
+ c67x00_remove_sie(&c67x00->sie[i]);
+
+ c67x00_ll_release(c67x00);
+
+ res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+ if (res)
+ free_irq(res->start, c67x00);
+
+ iounmap(c67x00->hpi.base);
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (res)
+ release_mem_region(res->start, res->end - res->start + 1);
+
+ kfree(c67x00);
+
+ return 0;
+}
+
+static struct platform_driver c67x00_driver = {
+ .probe = c67x00_drv_probe,
+ .remove = __devexit_p(c67x00_drv_remove),
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "c67x00",
+ },
+};
+MODULE_ALIAS("platform:c67x00");
+
+static int __init c67x00_init(void)
+{
+ return platform_driver_register(&c67x00_driver);
+}
+
+static void __exit c67x00_exit(void)
+{
+ platform_driver_unregister(&c67x00_driver);
+}
+
+module_init(c67x00_init);
+module_exit(c67x00_exit);
+
+MODULE_AUTHOR("Peter Korsgaard, Jan Veldeman, Grant Likely");
+MODULE_DESCRIPTION("Cypress C67X00 USB Controller Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/c67x00/c67x00-hcd.c b/drivers/usb/c67x00/c67x00-hcd.c
new file mode 100644
index 000000000000..a22b887f4e9e
--- /dev/null
+++ b/drivers/usb/c67x00/c67x00-hcd.c
@@ -0,0 +1,412 @@
+/*
+ * c67x00-hcd.c: Cypress C67X00 USB Host Controller Driver
+ *
+ * Copyright (C) 2006-2008 Barco N.V.
+ * Derived from the Cypress cy7c67200/300 ezusb linux driver and
+ * based on multiple host controller drivers inside the linux kernel.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301 USA.
+ */
+
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/usb.h>
+
+#include "c67x00.h"
+#include "c67x00-hcd.h"
+
+/* --------------------------------------------------------------------------
+ * Root Hub Support
+ */
+
+static __u8 c67x00_hub_des[] = {
+ 0x09, /* __u8 bLength; */
+ 0x29, /* __u8 bDescriptorType; Hub-descriptor */
+ 0x02, /* __u8 bNbrPorts; */
+ 0x00, /* __u16 wHubCharacteristics; */
+ 0x00, /* (per-port OC, no power switching) */
+ 0x32, /* __u8 bPwrOn2pwrGood; 2ms */
+ 0x00, /* __u8 bHubContrCurrent; 0 mA */
+ 0x00, /* __u8 DeviceRemovable; ** 7 Ports max ** */
+ 0xff, /* __u8 PortPwrCtrlMask; ** 7 ports max ** */
+};
+
+static void c67x00_hub_reset_host_port(struct c67x00_sie *sie, int port)
+{
+ struct c67x00_hcd *c67x00 = sie->private_data;
+ unsigned long flags;
+
+ c67x00_ll_husb_reset(sie, port);
+
+ spin_lock_irqsave(&c67x00->lock, flags);
+ c67x00_ll_husb_reset_port(sie, port);
+ spin_unlock_irqrestore(&c67x00->lock, flags);
+
+ c67x00_ll_set_husb_eot(sie->dev, DEFAULT_EOT);
+}
+
+static int c67x00_hub_status_data(struct usb_hcd *hcd, char *buf)
+{
+ struct c67x00_hcd *c67x00 = hcd_to_c67x00_hcd(hcd);
+ struct c67x00_sie *sie = c67x00->sie;
+ u16 status;
+ int i;
+
+ *buf = 0;
+ status = c67x00_ll_usb_get_status(sie);
+ for (i = 0; i < C67X00_PORTS; i++)
+ if (status & PORT_CONNECT_CHANGE(i))
+ *buf |= (1 << i);
+
+ /* bit 0 denotes hub change, b1..n port change */
+ *buf <<= 1;
+
+ return !!*buf;
+}
+
+static int c67x00_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
+ u16 wIndex, char *buf, u16 wLength)
+{
+ struct c67x00_hcd *c67x00 = hcd_to_c67x00_hcd(hcd);
+ struct c67x00_sie *sie = c67x00->sie;
+ u16 status, usb_status;
+ int len = 0;
+ unsigned int port = wIndex-1;
+ u16 wPortChange, wPortStatus;
+
+ switch (typeReq) {
+
+ case GetHubStatus:
+ *(__le32 *) buf = cpu_to_le32(0);
+ len = 4; /* hub power */
+ break;
+
+ case GetPortStatus:
+ if (wIndex > C67X00_PORTS)
+ return -EPIPE;
+
+ status = c67x00_ll_usb_get_status(sie);
+ usb_status = c67x00_ll_get_usb_ctl(sie);
+
+ wPortChange = 0;
+ if (status & PORT_CONNECT_CHANGE(port))
+ wPortChange |= USB_PORT_STAT_C_CONNECTION;
+
+ wPortStatus = USB_PORT_STAT_POWER;
+ if (!(status & PORT_SE0_STATUS(port)))
+ wPortStatus |= USB_PORT_STAT_CONNECTION;
+ if (usb_status & LOW_SPEED_PORT(port)) {
+ wPortStatus |= USB_PORT_STAT_LOW_SPEED;
+ c67x00->low_speed_ports |= (1 << port);
+ } else
+ c67x00->low_speed_ports &= ~(1 << port);
+
+ if (usb_status & SOF_EOP_EN(port))
+ wPortStatus |= USB_PORT_STAT_ENABLE;
+
+ *(__le16 *) buf = cpu_to_le16(wPortStatus);
+ *(__le16 *) (buf + 2) = cpu_to_le16(wPortChange);
+ len = 4;
+ break;
+
+ case SetHubFeature: /* We don't implement these */
+ case ClearHubFeature:
+ switch (wValue) {
+ case C_HUB_OVER_CURRENT:
+ case C_HUB_LOCAL_POWER:
+ len = 0;
+ break;
+
+ default:
+ return -EPIPE;
+ }
+ break;
+
+ case SetPortFeature:
+ if (wIndex > C67X00_PORTS)
+ return -EPIPE;
+
+ switch (wValue) {
+ case USB_PORT_FEAT_SUSPEND:
+ dev_dbg(c67x00_hcd_dev(c67x00),
+ "SetPortFeature %d (SUSPEND)\n", port);
+ len = 0;
+ break;
+
+ case USB_PORT_FEAT_RESET:
+ c67x00_hub_reset_host_port(sie, port);
+ len = 0;
+ break;
+
+ case USB_PORT_FEAT_POWER:
+ /* Power always enabled */
+ len = 0;
+ break;
+
+ default:
+ dev_dbg(c67x00_hcd_dev(c67x00),
+ "%s: SetPortFeature %d (0x%04x) Error!\n",
+ __func__, port, wValue);
+ return -EPIPE;
+ }
+ break;
+
+ case ClearPortFeature:
+ if (wIndex > C67X00_PORTS)
+ return -EPIPE;
+
+ switch (wValue) {
+ case USB_PORT_FEAT_ENABLE:
+ /* Reset the port so that the c67x00 also notices the
+ * disconnect */
+ c67x00_hub_reset_host_port(sie, port);
+ len = 0;
+ break;
+
+ case USB_PORT_FEAT_C_ENABLE:
+ dev_dbg(c67x00_hcd_dev(c67x00),
+ "ClearPortFeature (%d): C_ENABLE\n", port);
+ len = 0;
+ break;
+
+ case USB_PORT_FEAT_SUSPEND:
+ dev_dbg(c67x00_hcd_dev(c67x00),
+ "ClearPortFeature (%d): SUSPEND\n", port);
+ len = 0;
+ break;
+
+ case USB_PORT_FEAT_C_SUSPEND:
+ dev_dbg(c67x00_hcd_dev(c67x00),
+ "ClearPortFeature (%d): C_SUSPEND\n", port);
+ len = 0;
+ break;
+
+ case USB_PORT_FEAT_POWER:
+ dev_dbg(c67x00_hcd_dev(c67x00),
+ "ClearPortFeature (%d): POWER\n", port);
+ return -EPIPE;
+
+ case USB_PORT_FEAT_C_CONNECTION:
+ c67x00_ll_usb_clear_status(sie,
+ PORT_CONNECT_CHANGE(port));
+ len = 0;
+ break;
+
+ case USB_PORT_FEAT_C_OVER_CURRENT:
+ dev_dbg(c67x00_hcd_dev(c67x00),
+ "ClearPortFeature (%d): OVER_CURRENT\n", port);
+ len = 0;
+ break;
+
+ case USB_PORT_FEAT_C_RESET:
+ dev_dbg(c67x00_hcd_dev(c67x00),
+ "ClearPortFeature (%d): C_RESET\n", port);
+ len = 0;
+ break;
+
+ default:
+ dev_dbg(c67x00_hcd_dev(c67x00),
+ "%s: ClearPortFeature %d (0x%04x) Error!\n",
+ __func__, port, wValue);
+ return -EPIPE;
+ }
+ break;
+
+ case GetHubDescriptor:
+ len = min_t(unsigned int, sizeof(c67x00_hub_des), wLength);
+ memcpy(buf, c67x00_hub_des, len);
+ break;
+
+ default:
+ dev_dbg(c67x00_hcd_dev(c67x00), "%s: unknown\n", __func__);
+ return -EPIPE;
+ }
+
+ return 0;
+}
+
+/* ---------------------------------------------------------------------
+ * Main part of host controller driver
+ */
+
+/**
+ * c67x00_hcd_irq
+ *
+ * This function is called from the interrupt handler in c67x00-drv.c
+ */
+static void c67x00_hcd_irq(struct c67x00_sie *sie, u16 int_status, u16 msg)
+{
+ struct c67x00_hcd *c67x00 = sie->private_data;
+ struct usb_hcd *hcd = c67x00_hcd_to_hcd(c67x00);
+
+ /* Handle sie message flags */
+ if (msg) {
+ if (msg & HUSB_TDListDone)
+ c67x00_sched_kick(c67x00);
+ else
+ dev_warn(c67x00_hcd_dev(c67x00),
+ "Unknown SIE msg flag(s): 0x%04x\n", msg);
+ }
+
+ if (unlikely(hcd->state == HC_STATE_HALT))
+ return;
+
+ if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags))
+ return;
+
+ /* Handle Start of frame events */
+ if (int_status & SOFEOP_FLG(sie->sie_num)) {
+ c67x00_ll_usb_clear_status(sie, SOF_EOP_IRQ_FLG);
+ c67x00_sched_kick(c67x00);
+ set_bit(HCD_FLAG_SAW_IRQ, &hcd->flags);
+ }
+}
+
+/**
+ * c67x00_hcd_start: Host controller start hook
+ */
+static int c67x00_hcd_start(struct usb_hcd *hcd)
+{
+ hcd->uses_new_polling = 1;
+ hcd->state = HC_STATE_RUNNING;
+ hcd->poll_rh = 1;
+
+ return 0;
+}
+
+/**
+ * c67x00_hcd_stop: Host controller stop hook
+ */
+static void c67x00_hcd_stop(struct usb_hcd *hcd)
+{
+ /* Nothing to do */
+}
+
+static int c67x00_hcd_get_frame(struct usb_hcd *hcd)
+{
+ struct c67x00_hcd *c67x00 = hcd_to_c67x00_hcd(hcd);
+ u16 temp_val;
+
+ dev_dbg(c67x00_hcd_dev(c67x00), "%s\n", __func__);
+ temp_val = c67x00_ll_husb_get_frame(c67x00->sie);
+ temp_val &= HOST_FRAME_MASK;
+ return temp_val ? (temp_val - 1) : HOST_FRAME_MASK;
+}
+
+static struct hc_driver c67x00_hc_driver = {
+ .description = "c67x00-hcd",
+ .product_desc = "Cypress C67X00 Host Controller",
+ .hcd_priv_size = sizeof(struct c67x00_hcd),
+ .flags = HCD_USB11 | HCD_MEMORY,
+
+ /*
+ * basic lifecycle operations
+ */
+ .start = c67x00_hcd_start,
+ .stop = c67x00_hcd_stop,
+
+ /*
+ * managing i/o requests and associated device resources
+ */
+ .urb_enqueue = c67x00_urb_enqueue,
+ .urb_dequeue = c67x00_urb_dequeue,
+ .endpoint_disable = c67x00_endpoint_disable,
+
+ /*
+ * scheduling support
+ */
+ .get_frame_number = c67x00_hcd_get_frame,
+
+ /*
+ * root hub support
+ */
+ .hub_status_data = c67x00_hub_status_data,
+ .hub_control = c67x00_hub_control,
+};
+
+/* ---------------------------------------------------------------------
+ * Setup/Teardown routines
+ */
+
+int c67x00_hcd_probe(struct c67x00_sie *sie)
+{
+ struct c67x00_hcd *c67x00;
+ struct usb_hcd *hcd;
+ unsigned long flags;
+ int retval;
+
+ if (usb_disabled())
+ return -ENODEV;
+
+ hcd = usb_create_hcd(&c67x00_hc_driver, sie_dev(sie), "c67x00_sie");
+ if (!hcd) {
+ retval = -ENOMEM;
+ goto err0;
+ }
+ c67x00 = hcd_to_c67x00_hcd(hcd);
+
+ spin_lock_init(&c67x00->lock);
+ c67x00->sie = sie;
+
+ INIT_LIST_HEAD(&c67x00->list[PIPE_ISOCHRONOUS]);
+ INIT_LIST_HEAD(&c67x00->list[PIPE_INTERRUPT]);
+ INIT_LIST_HEAD(&c67x00->list[PIPE_CONTROL]);
+ INIT_LIST_HEAD(&c67x00->list[PIPE_BULK]);
+ c67x00->urb_count = 0;
+ INIT_LIST_HEAD(&c67x00->td_list);
+ c67x00->td_base_addr = CY_HCD_BUF_ADDR + SIE_TD_OFFSET(sie->sie_num);
+ c67x00->buf_base_addr = CY_HCD_BUF_ADDR + SIE_BUF_OFFSET(sie->sie_num);
+ c67x00->max_frame_bw = MAX_FRAME_BW_STD;
+
+ c67x00_ll_husb_init_host_port(sie);
+
+ init_completion(&c67x00->endpoint_disable);
+ retval = c67x00_sched_start_scheduler(c67x00);
+ if (retval)
+ goto err1;
+
+ retval = usb_add_hcd(hcd, 0, 0);
+ if (retval) {
+ dev_dbg(sie_dev(sie), "%s: usb_add_hcd returned %d\n",
+ __func__, retval);
+ goto err2;
+ }
+
+ spin_lock_irqsave(&sie->lock, flags);
+ sie->private_data = c67x00;
+ sie->irq = c67x00_hcd_irq;
+ spin_unlock_irqrestore(&sie->lock, flags);
+
+ return retval;
+
+ err2:
+ c67x00_sched_stop_scheduler(c67x00);
+ err1:
+ usb_put_hcd(hcd);
+ err0:
+ return retval;
+}
+
+/* may be called with controller, bus, and devices active */
+void c67x00_hcd_remove(struct c67x00_sie *sie)
+{
+ struct c67x00_hcd *c67x00 = sie->private_data;
+ struct usb_hcd *hcd = c67x00_hcd_to_hcd(c67x00);
+
+ c67x00_sched_stop_scheduler(c67x00);
+ usb_remove_hcd(hcd);
+ usb_put_hcd(hcd);
+}
diff --git a/drivers/usb/c67x00/c67x00-hcd.h b/drivers/usb/c67x00/c67x00-hcd.h
new file mode 100644
index 000000000000..e8c6d94b2514
--- /dev/null
+++ b/drivers/usb/c67x00/c67x00-hcd.h
@@ -0,0 +1,133 @@
+/*
+ * c67x00-hcd.h: Cypress C67X00 USB HCD
+ *
+ * Copyright (C) 2006-2008 Barco N.V.
+ * Derived from the Cypress cy7c67200/300 ezusb linux driver and
+ * based on multiple host controller drivers inside the linux kernel.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301 USA.
+ */
+
+#ifndef _USB_C67X00_HCD_H
+#define _USB_C67X00_HCD_H
+
+#include <linux/kernel.h>
+#include <linux/spinlock.h>
+#include <linux/list.h>
+#include <linux/usb.h>
+#include "../core/hcd.h"
+#include "c67x00.h"
+
+/*
+ * The following parameters depend on the CPU speed, bus speed, ...
+ * These can be tuned for specific use cases, e.g. if isochronous transfers
+ * are very important, bandwith can be sacrificed to guarantee that the
+ * 1ms deadline will be met.
+ * If bulk transfers are important, the MAX_FRAME_BW can be increased,
+ * but some (or many) isochronous deadlines might not be met.
+ *
+ * The values are specified in bittime.
+ */
+
+/*
+ * The current implementation switches between _STD (default) and _ISO (when
+ * isochronous transfers are scheduled), in order to optimize the throughput
+ * in normal cicrumstances, but also provide good isochronous behaviour.
+ *
+ * Bandwidth is described in bit time so with a 12MHz USB clock and 1ms
+ * frames; there are 12000 bit times per frame.
+ */
+
+#define TOTAL_FRAME_BW 12000
+#define DEFAULT_EOT 2250
+
+#define MAX_FRAME_BW_STD (TOTAL_FRAME_BW - DEFAULT_EOT)
+#define MAX_FRAME_BW_ISO 2400
+
+/*
+ * Periodic transfers may only use 90% of the full frame, but as
+ * we currently don't even use 90% of the full frame, we may
+ * use the full usable time for periodic transfers.
+ */
+#define MAX_PERIODIC_BW(full_bw) full_bw
+
+/* -------------------------------------------------------------------------- */
+
+struct c67x00_hcd {
+ spinlock_t lock;
+ struct c67x00_sie *sie;
+ unsigned int low_speed_ports; /* bitmask of low speed ports */
+ unsigned int urb_count;
+ unsigned int urb_iso_count;
+
+ struct list_head list[4]; /* iso, int, ctrl, bulk */
+#if PIPE_BULK != 3
+#error "Sanity check failed, this code presumes PIPE_... to range from 0 to 3"
+#endif
+
+ /* USB bandwidth allocated to td_list */
+ int bandwidth_allocated;
+ /* USB bandwidth allocated for isoc/int transfer */
+ int periodic_bw_allocated;
+ struct list_head td_list;
+ int max_frame_bw;
+
+ u16 td_base_addr;
+ u16 buf_base_addr;
+ u16 next_td_addr;
+ u16 next_buf_addr;
+
+ struct tasklet_struct tasklet;
+
+ struct completion endpoint_disable;
+
+ u16 current_frame;
+ u16 last_frame;
+};
+
+static inline struct c67x00_hcd *hcd_to_c67x00_hcd(struct usb_hcd *hcd)
+{
+ return (struct c67x00_hcd *)(hcd->hcd_priv);
+}
+
+static inline struct usb_hcd *c67x00_hcd_to_hcd(struct c67x00_hcd *c67x00)
+{
+ return container_of((void *)c67x00, struct usb_hcd, hcd_priv);
+}
+
+/* ---------------------------------------------------------------------
+ * Functions used by c67x00-drv
+ */
+
+int c67x00_hcd_probe(struct c67x00_sie *sie);
+void c67x00_hcd_remove(struct c67x00_sie *sie);
+
+/* ---------------------------------------------------------------------
+ * Transfer Descriptor scheduling functions
+ */
+int c67x00_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, gfp_t mem_flags);
+int c67x00_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status);
+void c67x00_endpoint_disable(struct usb_hcd *hcd,
+ struct usb_host_endpoint *ep);
+
+void c67x00_hcd_msg_received(struct c67x00_sie *sie, u16 msg);
+void c67x00_sched_kick(struct c67x00_hcd *c67x00);
+int c67x00_sched_start_scheduler(struct c67x00_hcd *c67x00);
+void c67x00_sched_stop_scheduler(struct c67x00_hcd *c67x00);
+
+#define c67x00_hcd_dev(x) (c67x00_hcd_to_hcd(x)->self.controller)
+
+#endif /* _USB_C67X00_HCD_H */
diff --git a/drivers/usb/c67x00/c67x00-ll-hpi.c b/drivers/usb/c67x00/c67x00-ll-hpi.c
new file mode 100644
index 000000000000..f3430b372f09
--- /dev/null
+++ b/drivers/usb/c67x00/c67x00-ll-hpi.c
@@ -0,0 +1,480 @@
+/*
+ * c67x00-ll-hpi.c: Cypress C67X00 USB Low level interface using HPI
+ *
+ * Copyright (C) 2006-2008 Barco N.V.
+ * Derived from the Cypress cy7c67200/300 ezusb linux driver and
+ * based on multiple host controller drivers inside the linux kernel.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301 USA.
+ */
+
+#include <asm/byteorder.h>
+#include <linux/io.h>
+#include <linux/usb/c67x00.h>
+#include "c67x00.h"
+
+#define COMM_REGS 14
+
+struct c67x00_lcp_int_data {
+ u16 regs[COMM_REGS];
+};
+
+/* -------------------------------------------------------------------------- */
+/* Interface definitions */
+
+#define COMM_ACK 0x0FED
+#define COMM_NAK 0xDEAD
+
+#define COMM_RESET 0xFA50
+#define COMM_EXEC_INT 0xCE01
+#define COMM_INT_NUM 0x01C2
+
+/* Registers 0 to COMM_REGS-1 */
+#define COMM_R(x) (0x01C4 + 2 * (x))
+
+#define HUSB_SIE_pCurrentTDPtr(x) ((x) ? 0x01B2 : 0x01B0)
+#define HUSB_SIE_pTDListDone_Sem(x) ((x) ? 0x01B8 : 0x01B6)
+#define HUSB_pEOT 0x01B4
+
+/* Software interrupts */
+/* 114, 115: */
+#define HUSB_SIE_INIT_INT(x) ((x) ? 0x0073 : 0x0072)
+#define HUSB_RESET_INT 0x0074
+
+#define SUSB_INIT_INT 0x0071
+#define SUSB_INIT_INT_LOC (SUSB_INIT_INT * 2)
+
+/* -----------------------------------------------------------------------
+ * HPI implementation
+ *
+ * The c67x00 chip also support control via SPI or HSS serial
+ * interfaces. However, this driver assumes that register access can
+ * be performed from IRQ context. While this is a safe assuption with
+ * the HPI interface, it is not true for the serial interfaces.
+ */
+
+/* HPI registers */
+#define HPI_DATA 0
+#define HPI_MAILBOX 1
+#define HPI_ADDR 2
+#define HPI_STATUS 3
+
+static inline u16 hpi_read_reg(struct c67x00_device *dev, int reg)
+{
+ return __raw_readw(dev->hpi.base + reg * dev->hpi.regstep);
+}
+
+static inline void hpi_write_reg(struct c67x00_device *dev, int reg, u16 value)
+{
+ __raw_writew(value, dev->hpi.base + reg * dev->hpi.regstep);
+}
+
+static inline u16 hpi_read_word_nolock(struct c67x00_device *dev, u16 reg)
+{
+ hpi_write_reg(dev, HPI_ADDR, reg);
+ return hpi_read_reg(dev, HPI_DATA);
+}
+
+static u16 hpi_read_word(struct c67x00_device *dev, u16 reg)
+{
+ u16 value;
+ unsigned long flags;
+
+ spin_lock_irqsave(&dev->hpi.lock, flags);
+ value = hpi_read_word_nolock(dev, reg);
+ spin_unlock_irqrestore(&dev->hpi.lock, flags);
+
+ return value;
+}
+
+static void hpi_write_word_nolock(struct c67x00_device *dev, u16 reg, u16 value)
+{
+ hpi_write_reg(dev, HPI_ADDR, reg);
+ hpi_write_reg(dev, HPI_DATA, value);
+}
+
+static void hpi_write_word(struct c67x00_device *dev, u16 reg, u16 value)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&dev->hpi.lock, flags);
+ hpi_write_word_nolock(dev, reg, value);
+ spin_unlock_irqrestore(&dev->hpi.lock, flags);
+}
+
+/*
+ * Only data is little endian, addr has cpu endianess
+ */
+static void hpi_write_words_le16(struct c67x00_device *dev, u16 addr,
+ u16 *data, u16 count)
+{
+ unsigned long flags;
+ int i;
+
+ spin_lock_irqsave(&dev->hpi.lock, flags);
+
+ hpi_write_reg(dev, HPI_ADDR, addr);
+ for (i = 0; i < count; i++)
+ hpi_write_reg(dev, HPI_DATA, cpu_to_le16(*data++));
+
+ spin_unlock_irqrestore(&dev->hpi.lock, flags);
+}
+
+/*
+ * Only data is little endian, addr has cpu endianess
+ */
+static void hpi_read_words_le16(struct c67x00_device *dev, u16 addr,
+ u16 *data, u16 count)
+{
+ unsigned long flags;
+ int i;
+
+ spin_lock_irqsave(&dev->hpi.lock, flags);
+ hpi_write_reg(dev, HPI_ADDR, addr);
+ for (i = 0; i < count; i++)
+ *data++ = le16_to_cpu(hpi_read_reg(dev, HPI_DATA));
+
+ spin_unlock_irqrestore(&dev->hpi.lock, flags);
+}
+
+static void hpi_set_bits(struct c67x00_device *dev, u16 reg, u16 mask)
+{
+ u16 value;
+ unsigned long flags;
+
+ spin_lock_irqsave(&dev->hpi.lock, flags);
+ value = hpi_read_word_nolock(dev, reg);
+ hpi_write_word_nolock(dev, reg, value | mask);
+ spin_unlock_irqrestore(&dev->hpi.lock, flags);
+}
+
+static void hpi_clear_bits(struct c67x00_device *dev, u16 reg, u16 mask)
+{
+ u16 value;
+ unsigned long flags;
+
+ spin_lock_irqsave(&dev->hpi.lock, flags);
+ value = hpi_read_word_nolock(dev, reg);
+ hpi_write_word_nolock(dev, reg, value & ~mask);
+ spin_unlock_irqrestore(&dev->hpi.lock, flags);
+}
+
+static u16 hpi_recv_mbox(struct c67x00_device *dev)
+{
+ u16 value;
+ unsigned long flags;
+
+ spin_lock_irqsave(&dev->hpi.lock, flags);
+ value = hpi_read_reg(dev, HPI_MAILBOX);
+ spin_unlock_irqrestore(&dev->hpi.lock, flags);
+
+ return value;
+}
+
+static u16 hpi_send_mbox(struct c67x00_device *dev, u16 value)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&dev->hpi.lock, flags);
+ hpi_write_reg(dev, HPI_MAILBOX, value);
+ spin_unlock_irqrestore(&dev->hpi.lock, flags);
+
+ return value;
+}
+
+u16 c67x00_ll_hpi_status(struct c67x00_device *dev)
+{
+ u16 value;
+ unsigned long flags;
+
+ spin_lock_irqsave(&dev->hpi.lock, flags);
+ value = hpi_read_reg(dev, HPI_STATUS);
+ spin_unlock_irqrestore(&dev->hpi.lock, flags);
+
+ return value;
+}
+
+void c67x00_ll_hpi_reg_init(struct c67x00_device *dev)
+{
+ int i;
+
+ hpi_recv_mbox(dev);
+ c67x00_ll_hpi_status(dev);
+ hpi_write_word(dev, HPI_IRQ_ROUTING_REG, 0);
+
+ for (i = 0; i < C67X00_SIES; i++) {
+ hpi_write_word(dev, SIEMSG_REG(i), 0);
+ hpi_read_word(dev, SIEMSG_REG(i));
+ }
+}
+
+void c67x00_ll_hpi_enable_sofeop(struct c67x00_sie *sie)
+{
+ hpi_set_bits(sie->dev, HPI_IRQ_ROUTING_REG,
+ SOFEOP_TO_HPI_EN(sie->sie_num));
+}
+
+void c67x00_ll_hpi_disable_sofeop(struct c67x00_sie *sie)
+{
+ hpi_clear_bits(sie->dev, HPI_IRQ_ROUTING_REG,
+ SOFEOP_TO_HPI_EN(sie->sie_num));
+}
+
+/* -------------------------------------------------------------------------- */
+/* Transactions */
+
+static inline u16 ll_recv_msg(struct c67x00_device *dev)
+{
+ u16 res;
+
+ res = wait_for_completion_timeout(&dev->hpi.lcp.msg_received, 5 * HZ);
+ WARN_ON(!res);
+
+ return (res == 0) ? -EIO : 0;
+}
+
+/* -------------------------------------------------------------------------- */
+/* General functions */
+
+u16 c67x00_ll_fetch_siemsg(struct c67x00_device *dev, int sie_num)
+{
+ u16 val;
+
+ val = hpi_read_word(dev, SIEMSG_REG(sie_num));
+ /* clear register to allow next message */
+ hpi_write_word(dev, SIEMSG_REG(sie_num), 0);
+
+ return val;
+}
+
+u16 c67x00_ll_get_usb_ctl(struct c67x00_sie *sie)
+{
+ return hpi_read_word(sie->dev, USB_CTL_REG(sie->sie_num));
+}
+
+/**
+ * c67x00_ll_usb_clear_status - clear the USB status bits
+ */
+void c67x00_ll_usb_clear_status(struct c67x00_sie *sie, u16 bits)
+{
+ hpi_write_word(sie->dev, USB_STAT_REG(sie->sie_num), bits);
+}
+
+u16 c67x00_ll_usb_get_status(struct c67x00_sie *sie)
+{
+ return hpi_read_word(sie->dev, USB_STAT_REG(sie->sie_num));
+}
+
+/* -------------------------------------------------------------------------- */
+
+static int c67x00_comm_exec_int(struct c67x00_device *dev, u16 nr,
+ struct c67x00_lcp_int_data *data)
+{
+ int i, rc;
+
+ mutex_lock(&dev->hpi.lcp.mutex);
+ hpi_write_word(dev, COMM_INT_NUM, nr);
+ for (i = 0; i < COMM_REGS; i++)
+ hpi_write_word(dev, COMM_R(i), data->regs[i]);
+ hpi_send_mbox(dev, COMM_EXEC_INT);
+ rc = ll_recv_msg(dev);
+ mutex_unlock(&dev->hpi.lcp.mutex);
+
+ return rc;
+}
+
+/* -------------------------------------------------------------------------- */
+/* Host specific functions */
+
+void c67x00_ll_set_husb_eot(struct c67x00_device *dev, u16 value)
+{
+ mutex_lock(&dev->hpi.lcp.mutex);
+ hpi_write_word(dev, HUSB_pEOT, value);
+ mutex_unlock(&dev->hpi.lcp.mutex);
+}
+
+static inline void c67x00_ll_husb_sie_init(struct c67x00_sie *sie)
+{
+ struct c67x00_device *dev = sie->dev;
+ struct c67x00_lcp_int_data data;
+ int rc;
+
+ rc = c67x00_comm_exec_int(dev, HUSB_SIE_INIT_INT(sie->sie_num), &data);
+ BUG_ON(rc); /* No return path for error code; crash spectacularly */
+}
+
+void c67x00_ll_husb_reset(struct c67x00_sie *sie, int port)
+{
+ struct c67x00_device *dev = sie->dev;
+ struct c67x00_lcp_int_data data;
+ int rc;
+
+ data.regs[0] = 50; /* Reset USB port for 50ms */
+ data.regs[1] = port | (sie->sie_num << 1);
+ rc = c67x00_comm_exec_int(dev, HUSB_RESET_INT, &data);
+ BUG_ON(rc); /* No return path for error code; crash spectacularly */
+}
+
+void c67x00_ll_husb_set_current_td(struct c67x00_sie *sie, u16 addr)
+{
+ hpi_write_word(sie->dev, HUSB_SIE_pCurrentTDPtr(sie->sie_num), addr);
+}
+
+u16 c67x00_ll_husb_get_current_td(struct c67x00_sie *sie)
+{
+ return hpi_read_word(sie->dev, HUSB_SIE_pCurrentTDPtr(sie->sie_num));
+}
+
+u16 c67x00_ll_husb_get_frame(struct c67x00_sie *sie)
+{
+ return hpi_read_word(sie->dev, HOST_FRAME_REG(sie->sie_num));
+}
+
+void c67x00_ll_husb_init_host_port(struct c67x00_sie *sie)
+{
+ /* Set port into host mode */
+ hpi_set_bits(sie->dev, USB_CTL_REG(sie->sie_num), HOST_MODE);
+ c67x00_ll_husb_sie_init(sie);
+ /* Clear interrupts */
+ c67x00_ll_usb_clear_status(sie, HOST_STAT_MASK);
+ /* Check */
+ if (!(hpi_read_word(sie->dev, USB_CTL_REG(sie->sie_num)) & HOST_MODE))
+ dev_warn(sie_dev(sie),
+ "SIE %d not set to host mode\n", sie->sie_num);
+}
+
+void c67x00_ll_husb_reset_port(struct c67x00_sie *sie, int port)
+{
+ /* Clear connect change */
+ c67x00_ll_usb_clear_status(sie, PORT_CONNECT_CHANGE(port));
+
+ /* Enable interrupts */
+ hpi_set_bits(sie->dev, HPI_IRQ_ROUTING_REG,
+ SOFEOP_TO_CPU_EN(sie->sie_num));
+ hpi_set_bits(sie->dev, HOST_IRQ_EN_REG(sie->sie_num),
+ SOF_EOP_IRQ_EN | DONE_IRQ_EN);
+
+ /* Enable pull down transistors */
+ hpi_set_bits(sie->dev, USB_CTL_REG(sie->sie_num), PORT_RES_EN(port));
+}
+
+/* -------------------------------------------------------------------------- */
+
+void c67x00_ll_irq(struct c67x00_device *dev, u16 int_status)
+{
+ if ((int_status & MBX_OUT_FLG) == 0)
+ return;
+
+ dev->hpi.lcp.last_msg = hpi_recv_mbox(dev);
+ complete(&dev->hpi.lcp.msg_received);
+}
+
+/* -------------------------------------------------------------------------- */
+
+int c67x00_ll_reset(struct c67x00_device *dev)
+{
+ int rc;
+
+ mutex_lock(&dev->hpi.lcp.mutex);
+ hpi_send_mbox(dev, COMM_RESET);
+ rc = ll_recv_msg(dev);
+ mutex_unlock(&dev->hpi.lcp.mutex);
+
+ return rc;
+}
+
+/* -------------------------------------------------------------------------- */
+
+/**
+ * c67x00_ll_write_mem_le16 - write into c67x00 memory
+ * Only data is little endian, addr has cpu endianess.
+ */
+void c67x00_ll_write_mem_le16(struct c67x00_device *dev, u16 addr,
+ void *data, int len)
+{
+ u8 *buf = data;
+
+ /* Sanity check */
+ if (addr + len > 0xffff) {
+ dev_err(&dev->pdev->dev,
+ "Trying to write beyond writable region!\n");
+ return;
+ }
+
+ if (addr & 0x01) {
+ /* unaligned access */
+ u16 tmp;
+ tmp = hpi_read_word(dev, addr - 1);
+ tmp = (tmp & 0x00ff) | (*buf++ << 8);
+ hpi_write_word(dev, addr - 1, tmp);
+ addr++;
+ len--;
+ }
+
+ hpi_write_words_le16(dev, addr, (u16 *)buf, len / 2);
+ buf += len & ~0x01;
+ addr += len & ~0x01;
+ len &= 0x01;
+
+ if (len) {
+ u16 tmp;
+ tmp = hpi_read_word(dev, addr);
+ tmp = (tmp & 0xff00) | *buf;
+ hpi_write_word(dev, addr, tmp);
+ }
+}
+
+/**
+ * c67x00_ll_read_mem_le16 - read from c67x00 memory
+ * Only data is little endian, addr has cpu endianess.
+ */
+void c67x00_ll_read_mem_le16(struct c67x00_device *dev, u16 addr,
+ void *data, int len)
+{
+ u8 *buf = data;
+
+ if (addr & 0x01) {
+ /* unaligned access */
+ u16 tmp;
+ tmp = hpi_read_word(dev, addr - 1);
+ *buf++ = (tmp >> 8) & 0x00ff;
+ addr++;
+ len--;
+ }
+
+ hpi_read_words_le16(dev, addr, (u16 *)buf, len / 2);
+ buf += len & ~0x01;
+ addr += len & ~0x01;
+ len &= 0x01;
+
+ if (len) {
+ u16 tmp;
+ tmp = hpi_read_word(dev, addr);
+ *buf = tmp & 0x00ff;
+ }
+}
+
+/* -------------------------------------------------------------------------- */
+
+void c67x00_ll_init(struct c67x00_device *dev)
+{
+ mutex_init(&dev->hpi.lcp.mutex);
+ init_completion(&dev->hpi.lcp.msg_received);
+}
+
+void c67x00_ll_release(struct c67x00_device *dev)
+{
+}
diff --git a/drivers/usb/c67x00/c67x00-sched.c b/drivers/usb/c67x00/c67x00-sched.c
new file mode 100644
index 000000000000..85dfe2965661
--- /dev/null
+++ b/drivers/usb/c67x00/c67x00-sched.c
@@ -0,0 +1,1170 @@
+/*
+ * c67x00-sched.c: Cypress C67X00 USB Host Controller Driver - TD scheduling
+ *
+ * Copyright (C) 2006-2008 Barco N.V.
+ * Derived from the Cypress cy7c67200/300 ezusb linux driver and
+ * based on multiple host controller drivers inside the linux kernel.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301 USA.
+ */
+
+#include <linux/kthread.h>
+
+#include "c67x00.h"
+#include "c67x00-hcd.h"
+
+/*
+ * These are the stages for a control urb, they are kept
+ * in both urb->interval and td->privdata.
+ */
+#define SETUP_STAGE 0
+#define DATA_STAGE 1
+#define STATUS_STAGE 2
+
+/* -------------------------------------------------------------------------- */
+
+/**
+ * struct c67x00_ep_data: Host endpoint data structure
+ */
+struct c67x00_ep_data {
+ struct list_head queue;
+ struct list_head node;
+ struct usb_host_endpoint *hep;
+ struct usb_device *dev;
+ u16 next_frame; /* For int/isoc transactions */
+};
+
+/**
+ * struct c67x00_td
+ *
+ * Hardware parts are little endiannes, SW in CPU endianess.
+ */
+struct c67x00_td {
+ /* HW specific part */
+ __le16 ly_base_addr; /* Bytes 0-1 */
+ __le16 port_length; /* Bytes 2-3 */
+ u8 pid_ep; /* Byte 4 */
+ u8 dev_addr; /* Byte 5 */
+ u8 ctrl_reg; /* Byte 6 */
+ u8 status; /* Byte 7 */
+ u8 retry_cnt; /* Byte 8 */
+#define TT_OFFSET 2
+#define TT_CONTROL 0
+#define TT_ISOCHRONOUS 1
+#define TT_BULK 2
+#define TT_INTERRUPT 3
+ u8 residue; /* Byte 9 */
+ __le16 next_td_addr; /* Bytes 10-11 */
+ /* SW part */
+ struct list_head td_list;
+ u16 td_addr;
+ void *data;
+ struct urb *urb;
+ unsigned long privdata;
+
+ /* These are needed for handling the toggle bits:
+ * an urb can be dequeued while a td is in progress
+ * after checking the td, the toggle bit might need to
+ * be fixed */
+ struct c67x00_ep_data *ep_data;
+ unsigned int pipe;
+};
+
+struct c67x00_urb_priv {
+ struct list_head hep_node;
+ struct urb *urb;
+ int port;
+ int cnt; /* packet number for isoc */
+ int status;
+ struct c67x00_ep_data *ep_data;
+};
+
+#define td_udev(td) ((td)->ep_data->dev)
+
+#define CY_TD_SIZE 12
+
+#define TD_PIDEP_OFFSET 0x04
+#define TD_PIDEPMASK_PID 0xF0
+#define TD_PIDEPMASK_EP 0x0F
+#define TD_PORTLENMASK_DL 0x02FF
+#define TD_PORTLENMASK_PN 0xC000
+
+#define TD_STATUS_OFFSET 0x07
+#define TD_STATUSMASK_ACK 0x01
+#define TD_STATUSMASK_ERR 0x02
+#define TD_STATUSMASK_TMOUT 0x04
+#define TD_STATUSMASK_SEQ 0x08
+#define TD_STATUSMASK_SETUP 0x10
+#define TD_STATUSMASK_OVF 0x20
+#define TD_STATUSMASK_NAK 0x40
+#define TD_STATUSMASK_STALL 0x80
+
+#define TD_ERROR_MASK (TD_STATUSMASK_ERR | TD_STATUSMASK_TMOUT | \
+ TD_STATUSMASK_STALL)
+
+#define TD_RETRYCNT_OFFSET 0x08
+#define TD_RETRYCNTMASK_ACT_FLG 0x10
+#define TD_RETRYCNTMASK_TX_TYPE 0x0C
+#define TD_RETRYCNTMASK_RTY_CNT 0x03
+
+#define TD_RESIDUE_OVERFLOW 0x80
+
+#define TD_PID_IN 0x90
+
+/* Residue: signed 8bits, neg -> OVERFLOW, pos -> UNDERFLOW */
+#define td_residue(td) ((__s8)(td->residue))
+#define td_ly_base_addr(td) (__le16_to_cpu((td)->ly_base_addr))
+#define td_port_length(td) (__le16_to_cpu((td)->port_length))
+#define td_next_td_addr(td) (__le16_to_cpu((td)->next_td_addr))
+
+#define td_active(td) ((td)->retry_cnt & TD_RETRYCNTMASK_ACT_FLG)
+#define td_length(td) (td_port_length(td) & TD_PORTLENMASK_DL)
+
+#define td_sequence_ok(td) (!td->status || \
+ (!(td->status & TD_STATUSMASK_SEQ) == \
+ !(td->ctrl_reg & SEQ_SEL)))
+
+#define td_acked(td) (!td->status || \
+ (td->status & TD_STATUSMASK_ACK))
+#define td_actual_bytes(td) (td_length(td) - td_residue(td))
+
+/* -------------------------------------------------------------------------- */
+
+#ifdef DEBUG
+
+/**
+ * dbg_td - Dump the contents of the TD
+ */
+static void dbg_td(struct c67x00_hcd *c67x00, struct c67x00_td *td, char *msg)
+{
+ struct device *dev = c67x00_hcd_dev(c67x00);
+
+ dev_dbg(dev, "### %s at 0x%04x\n", msg, td->td_addr);
+ dev_dbg(dev, "urb: 0x%p\n", td->urb);
+ dev_dbg(dev, "endpoint: %4d\n", usb_pipeendpoint(td->pipe));
+ dev_dbg(dev, "pipeout: %4d\n", usb_pipeout(td->pipe));
+ dev_dbg(dev, "ly_base_addr: 0x%04x\n", td_ly_base_addr(td));
+ dev_dbg(dev, "port_length: 0x%04x\n", td_port_length(td));
+ dev_dbg(dev, "pid_ep: 0x%02x\n", td->pid_ep);
+ dev_dbg(dev, "dev_addr: 0x%02x\n", td->dev_addr);
+ dev_dbg(dev, "ctrl_reg: 0x%02x\n", td->ctrl_reg);
+ dev_dbg(dev, "status: 0x%02x\n", td->status);
+ dev_dbg(dev, "retry_cnt: 0x%02x\n", td->retry_cnt);
+ dev_dbg(dev, "residue: 0x%02x\n", td->residue);
+ dev_dbg(dev, "next_td_addr: 0x%04x\n", td_next_td_addr(td));
+ dev_dbg(dev, "data:");
+ print_hex_dump(KERN_DEBUG, "", DUMP_PREFIX_OFFSET, 16, 1,
+ td->data, td_length(td), 1);
+}
+#else /* DEBUG */
+
+static inline void
+dbg_td(struct c67x00_hcd *c67x00, struct c67x00_td *td, char *msg) { }
+
+#endif /* DEBUG */
+
+/* -------------------------------------------------------------------------- */
+/* Helper functions */
+
+static inline u16 c67x00_get_current_frame_number(struct c67x00_hcd *c67x00)
+{
+ return c67x00_ll_husb_get_frame(c67x00->sie) & HOST_FRAME_MASK;
+}
+
+/**
+ * frame_add
+ * Software wraparound for framenumbers.
+ */
+static inline u16 frame_add(u16 a, u16 b)
+{
+ return (a + b) & HOST_FRAME_MASK;
+}
+
+/**
+ * frame_after - is frame a after frame b
+ */
+static inline int frame_after(u16 a, u16 b)
+{
+ return ((HOST_FRAME_MASK + a - b) & HOST_FRAME_MASK) <
+ (HOST_FRAME_MASK / 2);
+}
+
+/**
+ * frame_after_eq - is frame a after or equal to frame b
+ */
+static inline int frame_after_eq(u16 a, u16 b)
+{
+ return ((HOST_FRAME_MASK + 1 + a - b) & HOST_FRAME_MASK) <
+ (HOST_FRAME_MASK / 2);
+}
+
+/* -------------------------------------------------------------------------- */
+
+/**
+ * c67x00_release_urb - remove link from all tds to this urb
+ * Disconnects the urb from it's tds, so that it can be given back.
+ * pre: urb->hcpriv != NULL
+ */
+static void c67x00_release_urb(struct c67x00_hcd *c67x00, struct urb *urb)
+{
+ struct c67x00_td *td;
+ struct c67x00_urb_priv *urbp;
+
+ BUG_ON(!urb);
+
+ c67x00->urb_count--;
+
+ if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) {
+ c67x00->urb_iso_count--;
+ if (c67x00->urb_iso_count == 0)
+ c67x00->max_frame_bw = MAX_FRAME_BW_STD;
+ }
+
+ /* TODO this might be not so efficient when we've got many urbs!
+ * Alternatives:
+ * * only clear when needed
+ * * keep a list of tds with each urbp
+ */
+ list_for_each_entry(td, &c67x00->td_list, td_list)
+ if (urb == td->urb)
+ td->urb = NULL;
+
+ urbp = urb->hcpriv;
+ urb->hcpriv = NULL;
+ list_del(&urbp->hep_node);
+ kfree(urbp);
+}
+
+/* -------------------------------------------------------------------------- */
+
+static struct c67x00_ep_data *
+c67x00_ep_data_alloc(struct c67x00_hcd *c67x00, struct urb *urb)
+{
+ struct usb_host_endpoint *hep = urb->ep;
+ struct c67x00_ep_data *ep_data;
+ int type;
+
+ c67x00->current_frame = c67x00_get_current_frame_number(c67x00);
+
+ /* Check if endpoint already has a c67x00_ep_data struct allocated */
+ if (hep->hcpriv) {
+ ep_data = hep->hcpriv;
+ if (frame_after(c67x00->current_frame, ep_data->next_frame))
+ ep_data->next_frame =
+ frame_add(c67x00->current_frame, 1);
+ return hep->hcpriv;
+ }
+
+ /* Allocate and initialize a new c67x00 endpoint data structure */
+ ep_data = kzalloc(sizeof(*ep_data), GFP_ATOMIC);
+ if (!ep_data)
+ return NULL;
+
+ INIT_LIST_HEAD(&ep_data->queue);
+ INIT_LIST_HEAD(&ep_data->node);
+ ep_data->hep = hep;
+
+ /* hold a reference to udev as long as this endpoint lives,
+ * this is needed to possibly fix the data toggle */
+ ep_data->dev = usb_get_dev(urb->dev);
+ hep->hcpriv = ep_data;
+
+ /* For ISOC and INT endpoints, start ASAP: */
+ ep_data->next_frame = frame_add(c67x00->current_frame, 1);
+
+ /* Add the endpoint data to one of the pipe lists; must be added
+ in order of endpoint address */
+ type = usb_pipetype(urb->pipe);
+ if (list_empty(&ep_data->node)) {
+ list_add(&ep_data->node, &c67x00->list[type]);
+ } else {
+ struct c67x00_ep_data *prev;
+
+ list_for_each_entry(prev, &c67x00->list[type], node) {
+ if (prev->hep->desc.bEndpointAddress >
+ hep->desc.bEndpointAddress) {
+ list_add(&ep_data->node, prev->node.prev);
+ break;
+ }
+ }
+ }
+
+ return ep_data;
+}
+
+static int c67x00_ep_data_free(struct usb_host_endpoint *hep)
+{
+ struct c67x00_ep_data *ep_data = hep->hcpriv;
+
+ if (!ep_data)
+ return 0;
+
+ if (!list_empty(&ep_data->queue))
+ return -EBUSY;
+
+ usb_put_dev(ep_data->dev);
+ list_del(&ep_data->queue);
+ list_del(&ep_data->node);
+
+ kfree(ep_data);
+ hep->hcpriv = NULL;
+
+ return 0;
+}
+
+void c67x00_endpoint_disable(struct usb_hcd *hcd, struct usb_host_endpoint *ep)
+{
+ struct c67x00_hcd *c67x00 = hcd_to_c67x00_hcd(hcd);
+ unsigned long flags;
+
+ if (!list_empty(&ep->urb_list))
+ dev_warn(c67x00_hcd_dev(c67x00), "error: urb list not empty\n");
+
+ spin_lock_irqsave(&c67x00->lock, flags);
+
+ /* loop waiting for all transfers in the endpoint queue to complete */
+ while (c67x00_ep_data_free(ep)) {
+ /* Drop the lock so we can sleep waiting for the hardware */
+ spin_unlock_irqrestore(&c67x00->lock, flags);
+
+ /* it could happen that we reinitialize this completion, while
+ * somebody was waiting for that completion. The timeout and
+ * while loop handle such cases, but this might be improved */
+ INIT_COMPLETION(c67x00->endpoint_disable);
+ c67x00_sched_kick(c67x00);
+ wait_for_completion_timeout(&c67x00->endpoint_disable, 1 * HZ);
+
+ spin_lock_irqsave(&c67x00->lock, flags);
+ }
+
+ spin_unlock_irqrestore(&c67x00->lock, flags);
+}
+
+/* -------------------------------------------------------------------------- */
+
+static inline int get_root_port(struct usb_device *dev)
+{
+ while (dev->parent->parent)
+ dev = dev->parent;
+ return dev->portnum;
+}
+
+int c67x00_urb_enqueue(struct usb_hcd *hcd,
+ struct urb *urb, gfp_t mem_flags)
+{
+ int ret;
+ unsigned long flags;
+ struct c67x00_urb_priv *urbp;
+ struct c67x00_hcd *c67x00 = hcd_to_c67x00_hcd(hcd);
+ int port = get_root_port(urb->dev)-1;
+
+ spin_lock_irqsave(&c67x00->lock, flags);
+
+ /* Make sure host controller is running */
+ if (!HC_IS_RUNNING(hcd->state)) {
+ ret = -ENODEV;
+ goto err_not_linked;
+ }
+
+ ret = usb_hcd_link_urb_to_ep(hcd, urb);
+ if (ret)
+ goto err_not_linked;
+
+ /* Allocate and initialize urb private data */
+ urbp = kzalloc(sizeof(*urbp), mem_flags);
+ if (!urbp) {
+ ret = -ENOMEM;
+ goto err_urbp;
+ }
+
+ INIT_LIST_HEAD(&urbp->hep_node);
+ urbp->urb = urb;
+ urbp->port = port;
+
+ urbp->ep_data = c67x00_ep_data_alloc(c67x00, urb);
+
+ if (!urbp->ep_data) {
+ ret = -ENOMEM;
+ goto err_epdata;
+ }
+
+ /* TODO claim bandwidth with usb_claim_bandwidth?
+ * also release it somewhere! */
+
+ urb->hcpriv = urbp;
+
+ urb->actual_length = 0; /* Nothing received/transmitted yet */
+
+ switch (usb_pipetype(urb->pipe)) {
+ case PIPE_CONTROL:
+ urb->interval = SETUP_STAGE;
+ break;
+ case PIPE_INTERRUPT:
+ break;
+ case PIPE_BULK:
+ break;
+ case PIPE_ISOCHRONOUS:
+ if (c67x00->urb_iso_count == 0)
+ c67x00->max_frame_bw = MAX_FRAME_BW_ISO;
+ c67x00->urb_iso_count++;
+ /* Assume always URB_ISO_ASAP, FIXME */
+ if (list_empty(&urbp->ep_data->queue))
+ urb->start_frame = urbp->ep_data->next_frame;
+ else {
+ /* Go right after the last one */
+ struct urb *last_urb;
+
+ last_urb = list_entry(urbp->ep_data->queue.prev,
+ struct c67x00_urb_priv,
+ hep_node)->urb;
+ urb->start_frame =
+ frame_add(last_urb->start_frame,
+ last_urb->number_of_packets *
+ last_urb->interval);
+ }
+ urbp->cnt = 0;
+ break;
+ }
+
+ /* Add the URB to the endpoint queue */
+ list_add_tail(&urbp->hep_node, &urbp->ep_data->queue);
+
+ /* If this is the only URB, kick start the controller */
+ if (!c67x00->urb_count++)
+ c67x00_ll_hpi_enable_sofeop(c67x00->sie);
+
+ c67x00_sched_kick(c67x00);
+ spin_unlock_irqrestore(&c67x00->lock, flags);
+
+ return 0;
+
+err_epdata:
+ kfree(urbp);
+err_urbp:
+ usb_hcd_unlink_urb_from_ep(hcd, urb);
+err_not_linked:
+ spin_unlock_irqrestore(&c67x00->lock, flags);
+
+ return ret;
+}
+
+int c67x00_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status)
+{
+ struct c67x00_hcd *c67x00 = hcd_to_c67x00_hcd(hcd);
+ unsigned long flags;
+ int rc;
+
+ spin_lock_irqsave(&c67x00->lock, flags);
+ rc = usb_hcd_check_unlink_urb(hcd, urb, status);
+ if (rc)
+ goto done;
+
+ c67x00_release_urb(c67x00, urb);
+ usb_hcd_unlink_urb_from_ep(hcd, urb);
+
+ spin_unlock(&c67x00->lock);
+ usb_hcd_giveback_urb(hcd, urb, status);
+ spin_lock(&c67x00->lock);
+
+ spin_unlock_irqrestore(&c67x00->lock, flags);
+
+ return 0;
+
+ done:
+ spin_unlock_irqrestore(&c67x00->lock, flags);
+ return rc;
+}
+
+/* -------------------------------------------------------------------------- */
+
+/*
+ * pre: c67x00 locked, urb unlocked
+ */
+static void
+c67x00_giveback_urb(struct c67x00_hcd *c67x00, struct urb *urb, int status)
+{
+ struct c67x00_urb_priv *urbp;
+
+ if (!urb)
+ return;
+
+ urbp = urb->hcpriv;
+ urbp->status = status;
+
+ list_del_init(&urbp->hep_node);
+
+ c67x00_release_urb(c67x00, urb);
+ usb_hcd_unlink_urb_from_ep(c67x00_hcd_to_hcd(c67x00), urb);
+ spin_unlock(&c67x00->lock);
+ usb_hcd_giveback_urb(c67x00_hcd_to_hcd(c67x00), urb, urbp->status);
+ spin_lock(&c67x00->lock);
+}
+
+/* -------------------------------------------------------------------------- */
+
+static int c67x00_claim_frame_bw(struct c67x00_hcd *c67x00, struct urb *urb,
+ int len, int periodic)
+{
+ struct c67x00_urb_priv *urbp = urb->hcpriv;
+ int bit_time;
+
+ /* According to the C67x00 BIOS user manual, page 3-18,19, the
+ * following calculations provide the full speed bit times for
+ * a transaction.
+ *
+ * FS(in) = 112.5 + 9.36*BC + HOST_DELAY
+ * FS(in,iso) = 90.5 + 9.36*BC + HOST_DELAY
+ * FS(out) = 112.5 + 9.36*BC + HOST_DELAY
+ * FS(out,iso) = 78.4 + 9.36*BC + HOST_DELAY
+ * LS(in) = 802.4 + 75.78*BC + HOST_DELAY
+ * LS(out) = 802.6 + 74.67*BC + HOST_DELAY
+ *
+ * HOST_DELAY == 106 for the c67200 and c67300.
+ */
+
+ /* make calculations in 1/100 bit times to maintain resolution */
+ if (urbp->ep_data->dev->speed == USB_SPEED_LOW) {
+ /* Low speed pipe */
+ if (usb_pipein(urb->pipe))
+ bit_time = 80240 + 7578*len;
+ else
+ bit_time = 80260 + 7467*len;
+ } else {
+ /* FS pipes */
+ if (usb_pipeisoc(urb->pipe))
+ bit_time = usb_pipein(urb->pipe) ? 9050 : 7840;
+ else
+ bit_time = 11250;
+ bit_time += 936*len;
+ }
+
+ /* Scale back down to integer bit times. Use a host delay of 106.
+ * (this is the only place it is used) */
+ bit_time = ((bit_time+50) / 100) + 106;
+
+ if (unlikely(bit_time + c67x00->bandwidth_allocated >=
+ c67x00->max_frame_bw))
+ return -EMSGSIZE;
+
+ if (unlikely(c67x00->next_td_addr + CY_TD_SIZE >=
+ c67x00->td_base_addr + SIE_TD_SIZE))
+ return -EMSGSIZE;
+
+ if (unlikely(c67x00->next_buf_addr + len >=
+ c67x00->buf_base_addr + SIE_TD_BUF_SIZE))
+ return -EMSGSIZE;
+
+ if (periodic) {
+ if (unlikely(bit_time + c67x00->periodic_bw_allocated >=
+ MAX_PERIODIC_BW(c67x00->max_frame_bw)))
+ return -EMSGSIZE;
+ c67x00->periodic_bw_allocated += bit_time;
+ }
+
+ c67x00->bandwidth_allocated += bit_time;
+ return 0;
+}
+
+/* -------------------------------------------------------------------------- */
+
+/**
+ * td_addr and buf_addr must be word aligned
+ */
+static int c67x00_create_td(struct c67x00_hcd *c67x00, struct urb *urb,
+ void *data, int len, int pid, int toggle,
+ unsigned long privdata)
+{
+ struct c67x00_td *td;
+ struct c67x00_urb_priv *urbp = urb->hcpriv;
+ const __u8 active_flag = 1, retry_cnt = 1;
+ __u8 cmd = 0;
+ int tt = 0;
+
+ if (c67x00_claim_frame_bw(c67x00, urb, len, usb_pipeisoc(urb->pipe)
+ || usb_pipeint(urb->pipe)))
+ return -EMSGSIZE; /* Not really an error, but expected */
+
+ td = kzalloc(sizeof(*td), GFP_ATOMIC);
+ if (!td)
+ return -ENOMEM;
+
+ td->pipe = urb->pipe;
+ td->ep_data = urbp->ep_data;
+
+ if ((td_udev(td)->speed == USB_SPEED_LOW) &&
+ !(c67x00->low_speed_ports & (1 << urbp->port)))
+ cmd |= PREAMBLE_EN;
+
+ switch (usb_pipetype(td->pipe)) {
+ case PIPE_ISOCHRONOUS:
+ tt = TT_ISOCHRONOUS;
+ cmd |= ISO_EN;
+ break;
+ case PIPE_CONTROL:
+ tt = TT_CONTROL;
+ break;
+ case PIPE_BULK:
+ tt = TT_BULK;
+ break;
+ case PIPE_INTERRUPT:
+ tt = TT_INTERRUPT;
+ break;
+ }
+
+ if (toggle)
+ cmd |= SEQ_SEL;
+
+ cmd |= ARM_EN;
+
+ /* SW part */
+ td->td_addr = c67x00->next_td_addr;
+ c67x00->next_td_addr = c67x00->next_td_addr + CY_TD_SIZE;
+
+ /* HW part */
+ td->ly_base_addr = __cpu_to_le16(c67x00->next_buf_addr);
+ td->port_length = __cpu_to_le16((c67x00->sie->sie_num << 15) |
+ (urbp->port << 14) | (len & 0x3FF));
+ td->pid_ep = ((pid & 0xF) << TD_PIDEP_OFFSET) |
+ (usb_pipeendpoint(td->pipe) & 0xF);
+ td->dev_addr = usb_pipedevice(td->pipe) & 0x7F;
+ td->ctrl_reg = cmd;
+ td->status = 0;
+ td->retry_cnt = (tt << TT_OFFSET) | (active_flag << 4) | retry_cnt;
+ td->residue = 0;
+ td->next_td_addr = __cpu_to_le16(c67x00->next_td_addr);
+
+ /* SW part */
+ td->data = data;
+ td->urb = urb;
+ td->privdata = privdata;
+
+ c67x00->next_buf_addr += (len + 1) & ~0x01; /* properly align */
+
+ list_add_tail(&td->td_list, &c67x00->td_list);
+ return 0;
+}
+
+static inline void c67x00_release_td(struct c67x00_td *td)
+{
+ list_del_init(&td->td_list);
+ kfree(td);
+}
+
+/* -------------------------------------------------------------------------- */
+
+static int c67x00_add_data_urb(struct c67x00_hcd *c67x00, struct urb *urb)
+{
+ int remaining;
+ int toggle;
+ int pid;
+ int ret = 0;
+ int maxps;
+ int need_empty;
+
+ toggle = usb_gettoggle(urb->dev, usb_pipeendpoint(urb->pipe),
+ usb_pipeout(urb->pipe));
+ remaining = urb->transfer_buffer_length - urb->actual_length;
+
+ maxps = usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe));
+
+ need_empty = (urb->transfer_flags & URB_ZERO_PACKET) &&
+ usb_pipeout(urb->pipe) && !(remaining % maxps);
+
+ while (remaining || need_empty) {
+ int len;
+ char *td_buf;
+
+ len = (remaining > maxps) ? maxps : remaining;
+ if (!len)
+ need_empty = 0;
+
+ pid = usb_pipeout(urb->pipe) ? USB_PID_OUT : USB_PID_IN;
+ td_buf = urb->transfer_buffer + urb->transfer_buffer_length -
+ remaining;
+ ret = c67x00_create_td(c67x00, urb, td_buf, len, pid, toggle,
+ DATA_STAGE);
+ if (ret)
+ return ret; /* td wasn't created */
+
+ toggle ^= 1;
+ remaining -= len;
+ if (usb_pipecontrol(urb->pipe))
+ break;
+ }
+
+ return 0;
+}
+
+/**
+ * return 0 in case more bandwidth is available, else errorcode
+ */
+static int c67x00_add_ctrl_urb(struct c67x00_hcd *c67x00, struct urb *urb)
+{
+ int ret;
+ int pid;
+
+ switch (urb->interval) {
+ default:
+ case SETUP_STAGE:
+ ret = c67x00_create_td(c67x00, urb, urb->setup_packet,
+ 8, USB_PID_SETUP, 0, SETUP_STAGE);
+ if (ret)
+ return ret;
+ urb->interval = SETUP_STAGE;
+ usb_settoggle(urb->dev, usb_pipeendpoint(urb->pipe),
+ usb_pipeout(urb->pipe), 1);
+ break;
+ case DATA_STAGE:
+ if (urb->transfer_buffer_length) {
+ ret = c67x00_add_data_urb(c67x00, urb);
+ if (ret)
+ return ret;
+ break;
+ } /* else fallthrough */
+ case STATUS_STAGE:
+ pid = !usb_pipeout(urb->pipe) ? USB_PID_OUT : USB_PID_IN;
+ ret = c67x00_create_td(c67x00, urb, NULL, 0, pid, 1,
+ STATUS_STAGE);
+ if (ret)
+ return ret;
+ break;
+ }
+
+ return 0;
+}
+
+/*
+ * return 0 in case more bandwidth is available, else errorcode
+ */
+static int c67x00_add_int_urb(struct c67x00_hcd *c67x00, struct urb *urb)
+{
+ struct c67x00_urb_priv *urbp = urb->hcpriv;
+
+ if (frame_after_eq(c67x00->current_frame, urbp->ep_data->next_frame)) {
+ urbp->ep_data->next_frame =
+ frame_add(urbp->ep_data->next_frame, urb->interval);
+ return c67x00_add_data_urb(c67x00, urb);
+ }
+ return 0;
+}
+
+static int c67x00_add_iso_urb(struct c67x00_hcd *c67x00, struct urb *urb)
+{
+ struct c67x00_urb_priv *urbp = urb->hcpriv;
+
+ if (frame_after_eq(c67x00->current_frame, urbp->ep_data->next_frame)) {
+ char *td_buf;
+ int len, pid, ret;
+
+ BUG_ON(urbp->cnt >= urb->number_of_packets);
+
+ td_buf = urb->transfer_buffer +
+ urb->iso_frame_desc[urbp->cnt].offset;
+ len = urb->iso_frame_desc[urbp->cnt].length;
+ pid = usb_pipeout(urb->pipe) ? USB_PID_OUT : USB_PID_IN;
+
+ ret = c67x00_create_td(c67x00, urb, td_buf, len, pid, 0,
+ urbp->cnt);
+ if (ret) {
+ printk(KERN_DEBUG "create failed: %d\n", ret);
+ urb->iso_frame_desc[urbp->cnt].actual_length = 0;
+ urb->iso_frame_desc[urbp->cnt].status = ret;
+ if (urbp->cnt + 1 == urb->number_of_packets)
+ c67x00_giveback_urb(c67x00, urb, 0);
+ }
+
+ urbp->ep_data->next_frame =
+ frame_add(urbp->ep_data->next_frame, urb->interval);
+ urbp->cnt++;
+ }
+ return 0;
+}
+
+/* -------------------------------------------------------------------------- */
+
+static void c67x00_fill_from_list(struct c67x00_hcd *c67x00, int type,
+ int (*add)(struct c67x00_hcd *, struct urb *))
+{
+ struct c67x00_ep_data *ep_data;
+ struct urb *urb;
+
+ /* traverse every endpoint on the list */
+ list_for_each_entry(ep_data, &c67x00->list[type], node) {
+ if (!list_empty(&ep_data->queue)) {
+ /* and add the first urb */
+ /* isochronous transfer rely on this */
+ urb = list_entry(ep_data->queue.next,
+ struct c67x00_urb_priv,
+ hep_node)->urb;
+ add(c67x00, urb);
+ }
+ }
+}
+
+static void c67x00_fill_frame(struct c67x00_hcd *c67x00)
+{
+ struct c67x00_td *td, *ttd;
+
+ /* Check if we can proceed */
+ if (!list_empty(&c67x00->td_list)) {
+ dev_warn(c67x00_hcd_dev(c67x00),
+ "TD list not empty! This should not happen!\n");
+ list_for_each_entry_safe(td, ttd, &c67x00->td_list, td_list) {
+ dbg_td(c67x00, td, "Unprocessed td");
+ c67x00_release_td(td);
+ }
+ }
+
+ /* Reinitialize variables */
+ c67x00->bandwidth_allocated = 0;
+ c67x00->periodic_bw_allocated = 0;
+
+ c67x00->next_td_addr = c67x00->td_base_addr;
+ c67x00->next_buf_addr = c67x00->buf_base_addr;
+
+ /* Fill the list */
+ c67x00_fill_from_list(c67x00, PIPE_ISOCHRONOUS, c67x00_add_iso_urb);
+ c67x00_fill_from_list(c67x00, PIPE_INTERRUPT, c67x00_add_int_urb);
+ c67x00_fill_from_list(c67x00, PIPE_CONTROL, c67x00_add_ctrl_urb);
+ c67x00_fill_from_list(c67x00, PIPE_BULK, c67x00_add_data_urb);
+}
+
+/* -------------------------------------------------------------------------- */
+
+/**
+ * Get TD from C67X00
+ */
+static inline void
+c67x00_parse_td(struct c67x00_hcd *c67x00, struct c67x00_td *td)
+{
+ c67x00_ll_read_mem_le16(c67x00->sie->dev,
+ td->td_addr, td, CY_TD_SIZE);
+
+ if (usb_pipein(td->pipe) && td_actual_bytes(td))
+ c67x00_ll_read_mem_le16(c67x00->sie->dev, td_ly_base_addr(td),
+ td->data, td_actual_bytes(td));
+}
+
+static int c67x00_td_to_error(struct c67x00_hcd *c67x00, struct c67x00_td *td)
+{
+ if (td->status & TD_STATUSMASK_ERR) {
+ dbg_td(c67x00, td, "ERROR_FLAG");
+ return -EILSEQ;
+ }
+ if (td->status & TD_STATUSMASK_STALL) {
+ /* dbg_td(c67x00, td, "STALL"); */
+ return -EPIPE;
+ }
+ if (td->status & TD_STATUSMASK_TMOUT) {
+ dbg_td(c67x00, td, "TIMEOUT");
+ return -ETIMEDOUT;
+ }
+
+ return 0;
+}
+
+static inline int c67x00_end_of_data(struct c67x00_td *td)
+{
+ int maxps, need_empty, remaining;
+ struct urb *urb = td->urb;
+ int act_bytes;
+
+ act_bytes = td_actual_bytes(td);
+
+ if (unlikely(!act_bytes))
+ return 1; /* This was an empty packet */
+
+ maxps = usb_maxpacket(td_udev(td), td->pipe, usb_pipeout(td->pipe));
+
+ if (unlikely(act_bytes < maxps))
+ return 1; /* Smaller then full packet */
+
+ remaining = urb->transfer_buffer_length - urb->actual_length;
+ need_empty = (urb->transfer_flags & URB_ZERO_PACKET) &&
+ usb_pipeout(urb->pipe) && !(remaining % maxps);
+
+ if (unlikely(!remaining && !need_empty))
+ return 1;
+
+ return 0;
+}
+
+/* -------------------------------------------------------------------------- */
+
+/* Remove all td's from the list which come
+ * after last_td and are meant for the same pipe.
+ * This is used when a short packet has occured */
+static inline void c67x00_clear_pipe(struct c67x00_hcd *c67x00,
+ struct c67x00_td *last_td)
+{
+ struct c67x00_td *td, *tmp;
+ td = last_td;
+ tmp = last_td;
+ while (td->td_list.next != &c67x00->td_list) {
+ td = list_entry(td->td_list.next, struct c67x00_td, td_list);
+ if (td->pipe == last_td->pipe) {
+ c67x00_release_td(td);
+ td = tmp;
+ }
+ tmp = td;
+ }
+}
+
+/* -------------------------------------------------------------------------- */
+
+static void c67x00_handle_successful_td(struct c67x00_hcd *c67x00,
+ struct c67x00_td *td)
+{
+ struct urb *urb = td->urb;
+
+ if (!urb)
+ return;
+
+ urb->actual_length += td_actual_bytes(td);
+
+ switch (usb_pipetype(td->pipe)) {
+ /* isochronous tds are handled separately */
+ case PIPE_CONTROL:
+ switch (td->privdata) {
+ case SETUP_STAGE:
+ urb->interval =
+ urb->transfer_buffer_length ?
+ DATA_STAGE : STATUS_STAGE;
+ /* Don't count setup_packet with normal data: */
+ urb->actual_length = 0;
+ break;
+
+ case DATA_STAGE:
+ if (c67x00_end_of_data(td)) {
+ urb->interval = STATUS_STAGE;
+ c67x00_clear_pipe(c67x00, td);
+ }
+ break;
+
+ case STATUS_STAGE:
+ urb->interval = 0;
+ c67x00_giveback_urb(c67x00, urb, 0);
+ break;
+ }
+ break;
+
+ case PIPE_INTERRUPT:
+ case PIPE_BULK:
+ if (unlikely(c67x00_end_of_data(td))) {
+ c67x00_clear_pipe(c67x00, td);
+ c67x00_giveback_urb(c67x00, urb, 0);
+ }
+ break;
+ }
+}
+
+static void c67x00_handle_isoc(struct c67x00_hcd *c67x00, struct c67x00_td *td)
+{
+ struct urb *urb = td->urb;
+ struct c67x00_urb_priv *urbp;
+ int cnt;
+
+ if (!urb)
+ return;
+
+ urbp = urb->hcpriv;
+ cnt = td->privdata;
+
+ if (td->status & TD_ERROR_MASK)
+ urb->error_count++;
+
+ urb->iso_frame_desc[cnt].actual_length = td_actual_bytes(td);
+ urb->iso_frame_desc[cnt].status = c67x00_td_to_error(c67x00, td);
+ if (cnt + 1 == urb->number_of_packets) /* Last packet */
+ c67x00_giveback_urb(c67x00, urb, 0);
+}
+
+/* -------------------------------------------------------------------------- */
+
+/**
+ * c67x00_check_td_list - handle tds which have been processed by the c67x00
+ * pre: current_td == 0
+ */
+static inline void c67x00_check_td_list(struct c67x00_hcd *c67x00)
+{
+ struct c67x00_td *td, *tmp;
+ struct urb *urb;
+ int ack_ok;
+ int clear_endpoint;
+
+ list_for_each_entry_safe(td, tmp, &c67x00->td_list, td_list) {
+ /* get the TD */
+ c67x00_parse_td(c67x00, td);
+ urb = td->urb; /* urb can be NULL! */
+ ack_ok = 0;
+ clear_endpoint = 1;
+
+ /* Handle isochronous transfers separately */
+ if (usb_pipeisoc(td->pipe)) {
+ clear_endpoint = 0;
+ c67x00_handle_isoc(c67x00, td);
+ goto cont;
+ }
+
+ /* When an error occurs, all td's for that pipe go into an
+ * inactive state. This state matches successful transfers so
+ * we must make sure not to service them. */
+ if (td->status & TD_ERROR_MASK) {
+ c67x00_giveback_urb(c67x00, urb,
+ c67x00_td_to_error(c67x00, td));
+ goto cont;
+ }
+
+ if ((td->status & TD_STATUSMASK_NAK) || !td_sequence_ok(td) ||
+ !td_acked(td))
+ goto cont;
+
+ /* Sequence ok and acked, don't need to fix toggle */
+ ack_ok = 1;
+
+ if (unlikely(td->status & TD_STATUSMASK_OVF)) {
+ if (td_residue(td) & TD_RESIDUE_OVERFLOW) {
+ /* Overflow */
+ c67x00_giveback_urb(c67x00, urb, -EOVERFLOW);
+ goto cont;
+ }
+ }
+
+ clear_endpoint = 0;
+ c67x00_handle_successful_td(c67x00, td);
+
+cont:
+ if (clear_endpoint)
+ c67x00_clear_pipe(c67x00, td);
+ if (ack_ok)
+ usb_settoggle(td_udev(td), usb_pipeendpoint(td->pipe),
+ usb_pipeout(td->pipe),
+ !(td->ctrl_reg & SEQ_SEL));
+ /* next in list could have been removed, due to clear_pipe! */
+ tmp = list_entry(td->td_list.next, typeof(*td), td_list);
+ c67x00_release_td(td);
+ }
+}
+
+/* -------------------------------------------------------------------------- */
+
+static inline int c67x00_all_tds_processed(struct c67x00_hcd *c67x00)
+{
+ /* If all tds are processed, we can check the previous frame (if
+ * there was any) and start our next frame.
+ */
+ return !c67x00_ll_husb_get_current_td(c67x00->sie);
+}
+
+/**
+ * Send td to C67X00
+ */
+static void c67x00_send_td(struct c67x00_hcd *c67x00, struct c67x00_td *td)
+{
+ int len = td_length(td);
+
+ if (len && ((td->pid_ep & TD_PIDEPMASK_PID) != TD_PID_IN))
+ c67x00_ll_write_mem_le16(c67x00->sie->dev, td_ly_base_addr(td),
+ td->data, len);
+
+ c67x00_ll_write_mem_le16(c67x00->sie->dev,
+ td->td_addr, td, CY_TD_SIZE);
+}
+
+static void c67x00_send_frame(struct c67x00_hcd *c67x00)
+{
+ struct c67x00_td *td;
+
+ if (list_empty(&c67x00->td_list))
+ dev_warn(c67x00_hcd_dev(c67x00),
+ "%s: td list should not be empty here!\n",
+ __func__);
+
+ list_for_each_entry(td, &c67x00->td_list, td_list) {
+ if (td->td_list.next == &c67x00->td_list)
+ td->next_td_addr = 0; /* Last td in list */
+
+ c67x00_send_td(c67x00, td);
+ }
+
+ c67x00_ll_husb_set_current_td(c67x00->sie, c67x00->td_base_addr);
+}
+
+/* -------------------------------------------------------------------------- */
+
+/**
+ * c67x00_do_work - Schedulers state machine
+ */
+static void c67x00_do_work(struct c67x00_hcd *c67x00)
+{
+ spin_lock(&c67x00->lock);
+ /* Make sure all tds are processed */
+ if (!c67x00_all_tds_processed(c67x00))
+ goto out;
+
+ c67x00_check_td_list(c67x00);
+
+ /* no td's are being processed (current == 0)
+ * and all have been "checked" */
+ complete(&c67x00->endpoint_disable);
+
+ if (!list_empty(&c67x00->td_list))
+ goto out;
+
+ c67x00->current_frame = c67x00_get_current_frame_number(c67x00);
+ if (c67x00->current_frame == c67x00->last_frame)
+ goto out; /* Don't send tds in same frame */
+ c67x00->last_frame = c67x00->current_frame;
+
+ /* If no urbs are scheduled, our work is done */
+ if (!c67x00->urb_count) {
+ c67x00_ll_hpi_disable_sofeop(c67x00->sie);
+ goto out;
+ }
+
+ c67x00_fill_frame(c67x00);
+ if (!list_empty(&c67x00->td_list))
+ /* TD's have been added to the frame */
+ c67x00_send_frame(c67x00);
+
+ out:
+ spin_unlock(&c67x00->lock);
+}
+
+/* -------------------------------------------------------------------------- */
+
+static void c67x00_sched_tasklet(unsigned long __c67x00)
+{
+ struct c67x00_hcd *c67x00 = (struct c67x00_hcd *)__c67x00;
+ c67x00_do_work(c67x00);
+}
+
+void c67x00_sched_kick(struct c67x00_hcd *c67x00)
+{
+ tasklet_hi_schedule(&c67x00->tasklet);
+}
+
+int c67x00_sched_start_scheduler(struct c67x00_hcd *c67x00)
+{
+ tasklet_init(&c67x00->tasklet, c67x00_sched_tasklet,
+ (unsigned long)c67x00);
+ return 0;
+}
+
+void c67x00_sched_stop_scheduler(struct c67x00_hcd *c67x00)
+{
+ tasklet_kill(&c67x00->tasklet);
+}
diff --git a/drivers/usb/c67x00/c67x00.h b/drivers/usb/c67x00/c67x00.h
new file mode 100644
index 000000000000..a26e9ded0f32
--- /dev/null
+++ b/drivers/usb/c67x00/c67x00.h
@@ -0,0 +1,294 @@
+/*
+ * c67x00.h: Cypress C67X00 USB register and field definitions
+ *
+ * Copyright (C) 2006-2008 Barco N.V.
+ * Derived from the Cypress cy7c67200/300 ezusb linux driver and
+ * based on multiple host controller drivers inside the linux kernel.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301 USA.
+ */
+
+#ifndef _USB_C67X00_H
+#define _USB_C67X00_H
+
+#include <linux/spinlock.h>
+#include <linux/platform_device.h>
+#include <linux/completion.h>
+#include <linux/mutex.h>
+
+/* ---------------------------------------------------------------------
+ * Cypress C67x00 register definitions
+ */
+
+/* Hardware Revision Register */
+#define HW_REV_REG 0xC004
+
+/* General USB registers */
+/* ===================== */
+
+/* USB Control Register */
+#define USB_CTL_REG(x) ((x) ? 0xC0AA : 0xC08A)
+
+#define LOW_SPEED_PORT(x) ((x) ? 0x0800 : 0x0400)
+#define HOST_MODE 0x0200
+#define PORT_RES_EN(x) ((x) ? 0x0100 : 0x0080)
+#define SOF_EOP_EN(x) ((x) ? 0x0002 : 0x0001)
+
+/* USB status register - Notice it has different content in hcd/udc mode */
+#define USB_STAT_REG(x) ((x) ? 0xC0B0 : 0xC090)
+
+#define EP0_IRQ_FLG 0x0001
+#define EP1_IRQ_FLG 0x0002
+#define EP2_IRQ_FLG 0x0004
+#define EP3_IRQ_FLG 0x0008
+#define EP4_IRQ_FLG 0x0010
+#define EP5_IRQ_FLG 0x0020
+#define EP6_IRQ_FLG 0x0040
+#define EP7_IRQ_FLG 0x0080
+#define RESET_IRQ_FLG 0x0100
+#define SOF_EOP_IRQ_FLG 0x0200
+#define ID_IRQ_FLG 0x4000
+#define VBUS_IRQ_FLG 0x8000
+
+/* USB Host only registers */
+/* ======================= */
+
+/* Host n Control Register */
+#define HOST_CTL_REG(x) ((x) ? 0xC0A0 : 0xC080)
+
+#define PREAMBLE_EN 0x0080 /* Preamble enable */
+#define SEQ_SEL 0x0040 /* Data Toggle Sequence Bit Select */
+#define ISO_EN 0x0010 /* Isochronous enable */
+#define ARM_EN 0x0001 /* Arm operation */
+
+/* Host n Interrupt Enable Register */
+#define HOST_IRQ_EN_REG(x) ((x) ? 0xC0AC : 0xC08C)
+
+#define SOF_EOP_IRQ_EN 0x0200 /* SOF/EOP Interrupt Enable */
+#define SOF_EOP_TMOUT_IRQ_EN 0x0800 /* SOF/EOP Timeout Interrupt Enable */
+#define ID_IRQ_EN 0x4000 /* ID interrupt enable */
+#define VBUS_IRQ_EN 0x8000 /* VBUS interrupt enable */
+#define DONE_IRQ_EN 0x0001 /* Done Interrupt Enable */
+
+/* USB status register */
+#define HOST_STAT_MASK 0x02FD
+#define PORT_CONNECT_CHANGE(x) ((x) ? 0x0020 : 0x0010)
+#define PORT_SE0_STATUS(x) ((x) ? 0x0008 : 0x0004)
+
+/* Host Frame Register */
+#define HOST_FRAME_REG(x) ((x) ? 0xC0B6 : 0xC096)
+
+#define HOST_FRAME_MASK 0x07FF
+
+/* USB Peripheral only registers */
+/* ============================= */
+
+/* Device n Port Sel reg */
+#define DEVICE_N_PORT_SEL(x) ((x) ? 0xC0A4 : 0xC084)
+
+/* Device n Interrupt Enable Register */
+#define DEVICE_N_IRQ_EN_REG(x) ((x) ? 0xC0AC : 0xC08C)
+
+#define DEVICE_N_ENDPOINT_N_CTL_REG(dev, ep) ((dev) \
+ ? (0x0280 + (ep << 4)) \
+ : (0x0200 + (ep << 4)))
+#define DEVICE_N_ENDPOINT_N_STAT_REG(dev, ep) ((dev) \
+ ? (0x0286 + (ep << 4)) \
+ : (0x0206 + (ep << 4)))
+
+#define DEVICE_N_ADDRESS(dev) ((dev) ? (0xC0AE) : (0xC08E))
+
+/* HPI registers */
+/* ============= */
+
+/* HPI Status register */
+#define SOFEOP_FLG(x) (1 << ((x) ? 12 : 10))
+#define SIEMSG_FLG(x) (1 << (4 + (x)))
+#define RESET_FLG(x) ((x) ? 0x0200 : 0x0002)
+#define DONE_FLG(x) (1 << (2 + (x)))
+#define RESUME_FLG(x) (1 << (6 + (x)))
+#define MBX_OUT_FLG 0x0001 /* Message out available */
+#define MBX_IN_FLG 0x0100
+#define ID_FLG 0x4000
+#define VBUS_FLG 0x8000
+
+/* Interrupt routing register */
+#define HPI_IRQ_ROUTING_REG 0x0142
+
+#define HPI_SWAP_ENABLE(x) ((x) ? 0x0100 : 0x0001)
+#define RESET_TO_HPI_ENABLE(x) ((x) ? 0x0200 : 0x0002)
+#define DONE_TO_HPI_ENABLE(x) ((x) ? 0x0008 : 0x0004)
+#define RESUME_TO_HPI_ENABLE(x) ((x) ? 0x0080 : 0x0040)
+#define SOFEOP_TO_HPI_EN(x) ((x) ? 0x2000 : 0x0800)
+#define SOFEOP_TO_CPU_EN(x) ((x) ? 0x1000 : 0x0400)
+#define ID_TO_HPI_ENABLE 0x4000
+#define VBUS_TO_HPI_ENABLE 0x8000
+
+/* SIE msg registers */
+#define SIEMSG_REG(x) ((x) ? 0x0148 : 0x0144)
+
+#define HUSB_TDListDone 0x1000
+
+#define SUSB_EP0_MSG 0x0001
+#define SUSB_EP1_MSG 0x0002
+#define SUSB_EP2_MSG 0x0004
+#define SUSB_EP3_MSG 0x0008
+#define SUSB_EP4_MSG 0x0010
+#define SUSB_EP5_MSG 0x0020
+#define SUSB_EP6_MSG 0x0040
+#define SUSB_EP7_MSG 0x0080
+#define SUSB_RST_MSG 0x0100
+#define SUSB_SOF_MSG 0x0200
+#define SUSB_CFG_MSG 0x0400
+#define SUSB_SUS_MSG 0x0800
+#define SUSB_ID_MSG 0x4000
+#define SUSB_VBUS_MSG 0x8000
+
+/* BIOS interrupt routines */
+
+#define SUSBx_RECEIVE_INT(x) ((x) ? 97 : 81)
+#define SUSBx_SEND_INT(x) ((x) ? 96 : 80)
+
+#define SUSBx_DEV_DESC_VEC(x) ((x) ? 0x00D4 : 0x00B4)
+#define SUSBx_CONF_DESC_VEC(x) ((x) ? 0x00D6 : 0x00B6)
+#define SUSBx_STRING_DESC_VEC(x) ((x) ? 0x00D8 : 0x00B8)
+
+#define CY_HCD_BUF_ADDR 0x500 /* Base address for host */
+#define SIE_TD_SIZE 0x200 /* size of the td list */
+#define SIE_TD_BUF_SIZE 0x400 /* size of the data buffer */
+
+#define SIE_TD_OFFSET(host) ((host) ? (SIE_TD_SIZE+SIE_TD_BUF_SIZE) : 0)
+#define SIE_BUF_OFFSET(host) (SIE_TD_OFFSET(host) + SIE_TD_SIZE)
+
+/* Base address of HCD + 2 x TD_SIZE + 2 x TD_BUF_SIZE */
+#define CY_UDC_REQ_HEADER_BASE 0x1100
+/* 8- byte request headers for IN/OUT transfers */
+#define CY_UDC_REQ_HEADER_SIZE 8
+
+#define CY_UDC_REQ_HEADER_ADDR(ep_num) (CY_UDC_REQ_HEADER_BASE + \
+ ((ep_num) * CY_UDC_REQ_HEADER_SIZE))
+#define CY_UDC_DESC_BASE_ADDRESS (CY_UDC_REQ_HEADER_ADDR(8))
+
+#define CY_UDC_BIOS_REPLACE_BASE 0x1800
+#define CY_UDC_REQ_BUFFER_BASE 0x2000
+#define CY_UDC_REQ_BUFFER_SIZE 0x0400
+#define CY_UDC_REQ_BUFFER_ADDR(ep_num) (CY_UDC_REQ_BUFFER_BASE + \
+ ((ep_num) * CY_UDC_REQ_BUFFER_SIZE))
+
+/* ---------------------------------------------------------------------
+ * Driver data structures
+ */
+
+struct c67x00_device;
+
+/**
+ * struct c67x00_sie - Common data associated with a SIE
+ * @lock: lock to protect this struct and the associated chip registers
+ * @private_data: subdriver dependent data
+ * @irq: subdriver dependent irq handler, set NULL when not used
+ * @dev: link to common driver structure
+ * @sie_num: SIE number on chip, starting from 0
+ * @mode: SIE mode (host/peripheral/otg/not used)
+ */
+struct c67x00_sie {
+ /* Entries to be used by the subdrivers */
+ spinlock_t lock; /* protect this structure */
+ void *private_data;
+ void (*irq) (struct c67x00_sie *sie, u16 int_status, u16 msg);
+
+ /* Read only: */
+ struct c67x00_device *dev;
+ int sie_num;
+ int mode;
+};
+
+#define sie_dev(s) (&(s)->dev->pdev->dev)
+
+/**
+ * struct c67x00_lcp
+ */
+struct c67x00_lcp {
+ /* Internal use only */
+ struct mutex mutex;
+ struct completion msg_received;
+ u16 last_msg;
+};
+
+/*
+ * struct c67x00_hpi
+ */
+struct c67x00_hpi {
+ void __iomem *base;
+ int regstep;
+ spinlock_t lock;
+ struct c67x00_lcp lcp;
+};
+
+#define C67X00_SIES 2
+#define C67X00_PORTS 2
+
+/**
+ * struct c67x00_device - Common data associated with a c67x00 instance
+ * @hpi: hpi addresses
+ * @sie: array of sie's on this chip
+ * @pdev: platform device of instance
+ * @pdata: configuration provided by the platform
+ */
+struct c67x00_device {
+ struct c67x00_hpi hpi;
+ struct c67x00_sie sie[C67X00_SIES];
+ struct platform_device *pdev;
+ struct c67x00_platform_data *pdata;
+};
+
+/* ---------------------------------------------------------------------
+ * Low level interface functions
+ */
+
+/* Host Port Interface (HPI) functions */
+u16 c67x00_ll_hpi_status(struct c67x00_device *dev);
+void c67x00_ll_hpi_reg_init(struct c67x00_device *dev);
+void c67x00_ll_hpi_enable_sofeop(struct c67x00_sie *sie);
+void c67x00_ll_hpi_disable_sofeop(struct c67x00_sie *sie);
+
+/* General functions */
+u16 c67x00_ll_fetch_siemsg(struct c67x00_device *dev, int sie_num);
+u16 c67x00_ll_get_usb_ctl(struct c67x00_sie *sie);
+void c67x00_ll_usb_clear_status(struct c67x00_sie *sie, u16 bits);
+u16 c67x00_ll_usb_get_status(struct c67x00_sie *sie);
+void c67x00_ll_write_mem_le16(struct c67x00_device *dev, u16 addr,
+ void *data, int len);
+void c67x00_ll_read_mem_le16(struct c67x00_device *dev, u16 addr,
+ void *data, int len);
+
+/* Host specific functions */
+void c67x00_ll_set_husb_eot(struct c67x00_device *dev, u16 value);
+void c67x00_ll_husb_reset(struct c67x00_sie *sie, int port);
+void c67x00_ll_husb_set_current_td(struct c67x00_sie *sie, u16 addr);
+u16 c67x00_ll_husb_get_current_td(struct c67x00_sie *sie);
+u16 c67x00_ll_husb_get_frame(struct c67x00_sie *sie);
+void c67x00_ll_husb_init_host_port(struct c67x00_sie *sie);
+void c67x00_ll_husb_reset_port(struct c67x00_sie *sie, int port);
+
+/* Called by c67x00_irq to handle lcp interrupts */
+void c67x00_ll_irq(struct c67x00_device *dev, u16 int_status);
+
+/* Setup and teardown */
+void c67x00_ll_init(struct c67x00_device *dev);
+void c67x00_ll_release(struct c67x00_device *dev);
+int c67x00_ll_reset(struct c67x00_device *dev);
+
+#endif /* _USB_C67X00_H */
diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c
index e819e5359d57..3e69266e1f4d 100644
--- a/drivers/usb/core/message.c
+++ b/drivers/usb/core/message.c
@@ -394,7 +394,9 @@ int usb_sg_init(struct usb_sg_request *io, struct usb_device *dev,
if (!io->urbs)
goto nomem;
- urb_flags = URB_NO_TRANSFER_DMA_MAP | URB_NO_INTERRUPT;
+ urb_flags = URB_NO_INTERRUPT;
+ if (dma)
+ urb_flags |= URB_NO_TRANSFER_DMA_MAP;
if (usb_pipein(pipe))
urb_flags |= URB_SHORT_NOT_OK;
diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
index f7b54651dd42..6e784d2db423 100644
--- a/drivers/usb/gadget/Kconfig
+++ b/drivers/usb/gadget/Kconfig
@@ -231,6 +231,26 @@ config SUPERH_BUILT_IN_M66592
However, this problem is improved if change a value of
NET_IP_ALIGN to 4.
+config USB_GADGET_PXA27X
+ boolean "PXA 27x"
+ depends on ARCH_PXA && PXA27x
+ help
+ Intel's PXA 27x series XScale ARM v5TE processors include
+ an integrated full speed USB 1.1 device controller.
+
+ It has up to 23 endpoints, as well as endpoint zero (for
+ control transfers).
+
+ Say "y" to link the driver statically, or "m" to build a
+ dynamically linked module called "pxa27x_udc" and force all
+ gadget drivers to also be dynamically linked.
+
+config USB_PXA27X
+ tristate
+ depends on USB_GADGET_PXA27X
+ default USB_GADGET
+ select USB_GADGET_SELECTED
+
config USB_GADGET_GOKU
boolean "Toshiba TC86C001 'Goku-S'"
depends on PCI
diff --git a/drivers/usb/gadget/Makefile b/drivers/usb/gadget/Makefile
index c3aab80b6c76..12357255d740 100644
--- a/drivers/usb/gadget/Makefile
+++ b/drivers/usb/gadget/Makefile
@@ -9,6 +9,7 @@ obj-$(CONFIG_USB_DUMMY_HCD) += dummy_hcd.o
obj-$(CONFIG_USB_NET2280) += net2280.o
obj-$(CONFIG_USB_AMD5536UDC) += amd5536udc.o
obj-$(CONFIG_USB_PXA2XX) += pxa2xx_udc.o
+obj-$(CONFIG_USB_PXA27X) += pxa27x_udc.o
obj-$(CONFIG_USB_GOKU) += goku_udc.o
obj-$(CONFIG_USB_OMAP) += omap_udc.o
obj-$(CONFIG_USB_LH7A40X) += lh7a40x_udc.o
diff --git a/drivers/usb/gadget/ether.c b/drivers/usb/gadget/ether.c
index bb93bdd76593..8d61ea67a817 100644
--- a/drivers/usb/gadget/ether.c
+++ b/drivers/usb/gadget/ether.c
@@ -235,10 +235,6 @@ MODULE_PARM_DESC(host_addr, "Host Ethernet Address");
#define DEV_CONFIG_CDC
#endif
-#ifdef CONFIG_USB_GADGET_PXA27X
-#define DEV_CONFIG_CDC
-#endif
-
#ifdef CONFIG_USB_GADGET_S3C2410
#define DEV_CONFIG_CDC
#endif
@@ -270,6 +266,10 @@ MODULE_PARM_DESC(host_addr, "Host Ethernet Address");
#define DEV_CONFIG_SUBSET
#endif
+#ifdef CONFIG_USB_GADGET_PXA27X
+#define DEV_CONFIG_SUBSET
+#endif
+
#ifdef CONFIG_USB_GADGET_SUPERH
#define DEV_CONFIG_SUBSET
#endif
diff --git a/drivers/usb/gadget/file_storage.c b/drivers/usb/gadget/file_storage.c
index bf3f946fd455..47bb9f09a1aa 100644
--- a/drivers/usb/gadget/file_storage.c
+++ b/drivers/usb/gadget/file_storage.c
@@ -2307,6 +2307,29 @@ static int halt_bulk_in_endpoint(struct fsg_dev *fsg)
return rc;
}
+static int wedge_bulk_in_endpoint(struct fsg_dev *fsg)
+{
+ int rc;
+
+ DBG(fsg, "bulk-in set wedge\n");
+ rc = usb_ep_set_wedge(fsg->bulk_in);
+ if (rc == -EAGAIN)
+ VDBG(fsg, "delayed bulk-in endpoint wedge\n");
+ while (rc != 0) {
+ if (rc != -EAGAIN) {
+ WARN(fsg, "usb_ep_set_wedge -> %d\n", rc);
+ rc = 0;
+ break;
+ }
+
+ /* Wait for a short time and then try again */
+ if (msleep_interruptible(100) != 0)
+ return -EINTR;
+ rc = usb_ep_set_wedge(fsg->bulk_in);
+ }
+ return rc;
+}
+
static int pad_with_zeros(struct fsg_dev *fsg)
{
struct fsg_buffhd *bh = fsg->next_buffhd_to_fill;
@@ -2957,7 +2980,7 @@ static int received_cbw(struct fsg_dev *fsg, struct fsg_buffhd *bh)
* We aren't required to halt the OUT endpoint; instead
* we can simply accept and discard any data received
* until the next reset. */
- halt_bulk_in_endpoint(fsg);
+ wedge_bulk_in_endpoint(fsg);
set_bit(IGNORE_BULK_OUT, &fsg->atomic_bitflags);
return -EINVAL;
}
diff --git a/drivers/usb/gadget/pxa27x_udc.c b/drivers/usb/gadget/pxa27x_udc.c
new file mode 100644
index 000000000000..75eba202f737
--- /dev/null
+++ b/drivers/usb/gadget/pxa27x_udc.c
@@ -0,0 +1,2404 @@
+/*
+ * Handles the Intel 27x USB Device Controller (UDC)
+ *
+ * Inspired by original driver by Frank Becker, David Brownell, and others.
+ * Copyright (C) 2008 Robert Jarzmik
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/version.h>
+#include <linux/errno.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/list.h>
+#include <linux/interrupt.h>
+#include <linux/proc_fs.h>
+#include <linux/clk.h>
+#include <linux/irq.h>
+
+#include <asm/byteorder.h>
+#include <asm/hardware.h>
+
+#include <linux/usb.h>
+#include <linux/usb/ch9.h>
+#include <linux/usb/gadget.h>
+
+#include <asm/arch/udc.h>
+
+#include "pxa27x_udc.h"
+
+/*
+ * This driver handles the USB Device Controller (UDC) in Intel's PXA 27x
+ * series processors.
+ *
+ * Such controller drivers work with a gadget driver. The gadget driver
+ * returns descriptors, implements configuration and data protocols used
+ * by the host to interact with this device, and allocates endpoints to
+ * the different protocol interfaces. The controller driver virtualizes
+ * usb hardware so that the gadget drivers will be more portable.
+ *
+ * This UDC hardware wants to implement a bit too much USB protocol. The
+ * biggest issues are: that the endpoints have to be set up before the
+ * controller can be enabled (minor, and not uncommon); and each endpoint
+ * can only have one configuration, interface and alternative interface
+ * number (major, and very unusual). Once set up, these cannot be changed
+ * without a controller reset.
+ *
+ * The workaround is to setup all combinations necessary for the gadgets which
+ * will work with this driver. This is done in pxa_udc structure, statically.
+ * See pxa_udc, udc_usb_ep versus pxa_ep, and matching function find_pxa_ep.
+ * (You could modify this if needed. Some drivers have a "fifo_mode" module
+ * parameter to facilitate such changes.)
+ *
+ * The combinations have been tested with these gadgets :
+ * - zero gadget
+ * - file storage gadget
+ * - ether gadget
+ *
+ * The driver doesn't use DMA, only IO access and IRQ callbacks. No use is
+ * made of UDC's double buffering either. USB "On-The-Go" is not implemented.
+ *
+ * All the requests are handled the same way :
+ * - the drivers tries to handle the request directly to the IO
+ * - if the IO fifo is not big enough, the remaining is send/received in
+ * interrupt handling.
+ */
+
+#define DRIVER_VERSION "2008-04-18"
+#define DRIVER_DESC "PXA 27x USB Device Controller driver"
+
+static const char driver_name[] = "pxa27x_udc";
+static struct pxa_udc *the_controller;
+
+static void handle_ep(struct pxa_ep *ep);
+
+/*
+ * Debug filesystem
+ */
+#ifdef CONFIG_USB_GADGET_DEBUG_FS
+
+#include <linux/debugfs.h>
+#include <linux/uaccess.h>
+#include <linux/seq_file.h>
+
+static int state_dbg_show(struct seq_file *s, void *p)
+{
+ struct pxa_udc *udc = s->private;
+ int pos = 0, ret;
+ u32 tmp;
+
+ ret = -ENODEV;
+ if (!udc->driver)
+ goto out;
+
+ /* basic device status */
+ pos += seq_printf(s, DRIVER_DESC "\n"
+ "%s version: %s\nGadget driver: %s\n",
+ driver_name, DRIVER_VERSION,
+ udc->driver ? udc->driver->driver.name : "(none)");
+
+ tmp = udc_readl(udc, UDCCR);
+ pos += seq_printf(s,
+ "udccr=0x%0x(%s%s%s%s%s%s%s%s%s%s), "
+ "con=%d,inter=%d,altinter=%d\n", tmp,
+ (tmp & UDCCR_OEN) ? " oen":"",
+ (tmp & UDCCR_AALTHNP) ? " aalthnp":"",
+ (tmp & UDCCR_AHNP) ? " rem" : "",
+ (tmp & UDCCR_BHNP) ? " rstir" : "",
+ (tmp & UDCCR_DWRE) ? " dwre" : "",
+ (tmp & UDCCR_SMAC) ? " smac" : "",
+ (tmp & UDCCR_EMCE) ? " emce" : "",
+ (tmp & UDCCR_UDR) ? " udr" : "",
+ (tmp & UDCCR_UDA) ? " uda" : "",
+ (tmp & UDCCR_UDE) ? " ude" : "",
+ (tmp & UDCCR_ACN) >> UDCCR_ACN_S,
+ (tmp & UDCCR_AIN) >> UDCCR_AIN_S,
+ (tmp & UDCCR_AAISN) >> UDCCR_AAISN_S);
+ /* registers for device and ep0 */
+ pos += seq_printf(s, "udcicr0=0x%08x udcicr1=0x%08x\n",
+ udc_readl(udc, UDCICR0), udc_readl(udc, UDCICR1));
+ pos += seq_printf(s, "udcisr0=0x%08x udcisr1=0x%08x\n",
+ udc_readl(udc, UDCISR0), udc_readl(udc, UDCISR1));
+ pos += seq_printf(s, "udcfnr=%d\n", udc_readl(udc, UDCFNR));
+ pos += seq_printf(s, "irqs: reset=%lu, suspend=%lu, resume=%lu, "
+ "reconfig=%lu\n",
+ udc->stats.irqs_reset, udc->stats.irqs_suspend,
+ udc->stats.irqs_resume, udc->stats.irqs_reconfig);
+
+ ret = 0;
+out:
+ return ret;
+}
+
+static int queues_dbg_show(struct seq_file *s, void *p)
+{
+ struct pxa_udc *udc = s->private;
+ struct pxa_ep *ep;
+ struct pxa27x_request *req;
+ int pos = 0, i, maxpkt, ret;
+
+ ret = -ENODEV;
+ if (!udc->driver)
+ goto out;
+
+ /* dump endpoint queues */
+ for (i = 0; i < NR_PXA_ENDPOINTS; i++) {
+ ep = &udc->pxa_ep[i];
+ maxpkt = ep->fifo_size;
+ pos += seq_printf(s, "%-12s max_pkt=%d %s\n",
+ EPNAME(ep), maxpkt, "pio");
+
+ if (list_empty(&ep->queue)) {
+ pos += seq_printf(s, "\t(nothing queued)\n");
+ continue;
+ }
+
+ list_for_each_entry(req, &ep->queue, queue) {
+ pos += seq_printf(s, "\treq %p len %d/%d buf %p\n",
+ &req->req, req->req.actual,
+ req->req.length, req->req.buf);
+ }
+ }
+
+ ret = 0;
+out:
+ return ret;
+}
+
+static int eps_dbg_show(struct seq_file *s, void *p)
+{
+ struct pxa_udc *udc = s->private;
+ struct pxa_ep *ep;
+ int pos = 0, i, ret;
+ u32 tmp;
+
+ ret = -ENODEV;
+ if (!udc->driver)
+ goto out;
+
+ ep = &udc->pxa_ep[0];
+ tmp = udc_ep_readl(ep, UDCCSR);
+ pos += seq_printf(s, "udccsr0=0x%03x(%s%s%s%s%s%s%s)\n", tmp,
+ (tmp & UDCCSR0_SA) ? " sa" : "",
+ (tmp & UDCCSR0_RNE) ? " rne" : "",
+ (tmp & UDCCSR0_FST) ? " fst" : "",
+ (tmp & UDCCSR0_SST) ? " sst" : "",
+ (tmp & UDCCSR0_DME) ? " dme" : "",
+ (tmp & UDCCSR0_IPR) ? " ipr" : "",
+ (tmp & UDCCSR0_OPC) ? " opc" : "");
+ for (i = 0; i < NR_PXA_ENDPOINTS; i++) {
+ ep = &udc->pxa_ep[i];
+ tmp = i? udc_ep_readl(ep, UDCCR) : udc_readl(udc, UDCCR);
+ pos += seq_printf(s, "%-12s: "
+ "IN %lu(%lu reqs), OUT %lu(%lu reqs), "
+ "irqs=%lu, udccr=0x%08x, udccsr=0x%03x, "
+ "udcbcr=%d\n",
+ EPNAME(ep),
+ ep->stats.in_bytes, ep->stats.in_ops,
+ ep->stats.out_bytes, ep->stats.out_ops,
+ ep->stats.irqs,
+ tmp, udc_ep_readl(ep, UDCCSR),
+ udc_ep_readl(ep, UDCBCR));
+ }
+
+ ret = 0;
+out:
+ return ret;
+}
+
+static int eps_dbg_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, eps_dbg_show, inode->i_private);
+}
+
+static int queues_dbg_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, queues_dbg_show, inode->i_private);
+}
+
+static int state_dbg_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, state_dbg_show, inode->i_private);
+}
+
+static const struct file_operations state_dbg_fops = {
+ .owner = THIS_MODULE,
+ .open = state_dbg_open,
+ .llseek = seq_lseek,
+ .read = seq_read,
+ .release = single_release,
+};
+
+static const struct file_operations queues_dbg_fops = {
+ .owner = THIS_MODULE,
+ .open = queues_dbg_open,
+ .llseek = seq_lseek,
+ .read = seq_read,
+ .release = single_release,
+};
+
+static const struct file_operations eps_dbg_fops = {
+ .owner = THIS_MODULE,
+ .open = eps_dbg_open,
+ .llseek = seq_lseek,
+ .read = seq_read,
+ .release = single_release,
+};
+
+static void pxa_init_debugfs(struct pxa_udc *udc)
+{
+ struct dentry *root, *state, *queues, *eps;
+
+ root = debugfs_create_dir(udc->gadget.name, NULL);
+ if (IS_ERR(root) || !root)
+ goto err_root;
+
+ state = debugfs_create_file("udcstate", 0400, root, udc,
+ &state_dbg_fops);
+ if (!state)
+ goto err_state;
+ queues = debugfs_create_file("queues", 0400, root, udc,
+ &queues_dbg_fops);
+ if (!queues)
+ goto err_queues;
+ eps = debugfs_create_file("epstate", 0400, root, udc,
+ &eps_dbg_fops);
+ if (!queues)
+ goto err_eps;
+
+ udc->debugfs_root = root;
+ udc->debugfs_state = state;
+ udc->debugfs_queues = queues;
+ udc->debugfs_eps = eps;
+ return;
+err_eps:
+ debugfs_remove(eps);
+err_queues:
+ debugfs_remove(queues);
+err_state:
+ debugfs_remove(root);
+err_root:
+ dev_err(udc->dev, "debugfs is not available\n");
+}
+
+static void pxa_cleanup_debugfs(struct pxa_udc *udc)
+{
+ debugfs_remove(udc->debugfs_eps);
+ debugfs_remove(udc->debugfs_queues);
+ debugfs_remove(udc->debugfs_state);
+ debugfs_remove(udc->debugfs_root);
+ udc->debugfs_eps = NULL;
+ udc->debugfs_queues = NULL;
+ udc->debugfs_state = NULL;
+ udc->debugfs_root = NULL;
+}
+
+#else
+static inline void pxa_init_debugfs(struct pxa_udc *udc)
+{
+}
+
+static inline void pxa_cleanup_debugfs(struct pxa_udc *udc)
+{
+}
+#endif
+
+/**
+ * is_match_usb_pxa - check if usb_ep and pxa_ep match
+ * @udc_usb_ep: usb endpoint
+ * @ep: pxa endpoint
+ * @config: configuration required in pxa_ep
+ * @interface: interface required in pxa_ep
+ * @altsetting: altsetting required in pxa_ep
+ *
+ * Returns 1 if all criteria match between pxa and usb endpoint, 0 otherwise
+ */
+static int is_match_usb_pxa(struct udc_usb_ep *udc_usb_ep, struct pxa_ep *ep,
+ int config, int interface, int altsetting)
+{
+ if (usb_endpoint_num(&udc_usb_ep->desc) != ep->addr)
+ return 0;
+ if (usb_endpoint_dir_in(&udc_usb_ep->desc) != ep->dir_in)
+ return 0;
+ if (usb_endpoint_type(&udc_usb_ep->desc) != ep->type)
+ return 0;
+ if ((ep->config != config) || (ep->interface != interface)
+ || (ep->alternate != altsetting))
+ return 0;
+ return 1;
+}
+
+/**
+ * find_pxa_ep - find pxa_ep structure matching udc_usb_ep
+ * @udc: pxa udc
+ * @udc_usb_ep: udc_usb_ep structure
+ *
+ * Match udc_usb_ep and all pxa_ep available, to see if one matches.
+ * This is necessary because of the strong pxa hardware restriction requiring
+ * that once pxa endpoints are initialized, their configuration is freezed, and
+ * no change can be made to their address, direction, or in which configuration,
+ * interface or altsetting they are active ... which differs from more usual
+ * models which have endpoints be roughly just addressable fifos, and leave
+ * configuration events up to gadget drivers (like all control messages).
+ *
+ * Note that there is still a blurred point here :
+ * - we rely on UDCCR register "active interface" and "active altsetting".
+ * This is a nonsense in regard of USB spec, where multiple interfaces are
+ * active at the same time.
+ * - if we knew for sure that the pxa can handle multiple interface at the
+ * same time, assuming Intel's Developer Guide is wrong, this function
+ * should be reviewed, and a cache of couples (iface, altsetting) should
+ * be kept in the pxa_udc structure. In this case this function would match
+ * against the cache of couples instead of the "last altsetting" set up.
+ *
+ * Returns the matched pxa_ep structure or NULL if none found
+ */
+static struct pxa_ep *find_pxa_ep(struct pxa_udc *udc,
+ struct udc_usb_ep *udc_usb_ep)
+{
+ int i;
+ struct pxa_ep *ep;
+ int cfg = udc->config;
+ int iface = udc->last_interface;
+ int alt = udc->last_alternate;
+
+ if (udc_usb_ep == &udc->udc_usb_ep[0])
+ return &udc->pxa_ep[0];
+
+ for (i = 1; i < NR_PXA_ENDPOINTS; i++) {
+ ep = &udc->pxa_ep[i];
+ if (is_match_usb_pxa(udc_usb_ep, ep, cfg, iface, alt))
+ return ep;
+ }
+ return NULL;
+}
+
+/**
+ * update_pxa_ep_matches - update pxa_ep cached values in all udc_usb_ep
+ * @udc: pxa udc
+ *
+ * Context: in_interrupt()
+ *
+ * Updates all pxa_ep fields in udc_usb_ep structures, if this field was
+ * previously set up (and is not NULL). The update is necessary is a
+ * configuration change or altsetting change was issued by the USB host.
+ */
+static void update_pxa_ep_matches(struct pxa_udc *udc)
+{
+ int i;
+ struct udc_usb_ep *udc_usb_ep;
+
+ for (i = 1; i < NR_USB_ENDPOINTS; i++) {
+ udc_usb_ep = &udc->udc_usb_ep[i];
+ if (udc_usb_ep->pxa_ep)
+ udc_usb_ep->pxa_ep = find_pxa_ep(udc, udc_usb_ep);
+ }
+}
+
+/**
+ * pio_irq_enable - Enables irq generation for one endpoint
+ * @ep: udc endpoint
+ */
+static void pio_irq_enable(struct pxa_ep *ep)
+{
+ struct pxa_udc *udc = ep->dev;
+ int index = EPIDX(ep);
+ u32 udcicr0 = udc_readl(udc, UDCICR0);
+ u32 udcicr1 = udc_readl(udc, UDCICR1);
+
+ if (index < 16)
+ udc_writel(udc, UDCICR0, udcicr0 | (3 << (index * 2)));
+ else
+ udc_writel(udc, UDCICR1, udcicr1 | (3 << ((index - 16) * 2)));
+}
+
+/**
+ * pio_irq_disable - Disables irq generation for one endpoint
+ * @ep: udc endpoint
+ * @index: endpoint number
+ */
+static void pio_irq_disable(struct pxa_ep *ep)
+{
+ struct pxa_udc *udc = ep->dev;
+ int index = EPIDX(ep);
+ u32 udcicr0 = udc_readl(udc, UDCICR0);
+ u32 udcicr1 = udc_readl(udc, UDCICR1);
+
+ if (index < 16)
+ udc_writel(udc, UDCICR0, udcicr0 & ~(3 << (index * 2)));
+ else
+ udc_writel(udc, UDCICR1, udcicr1 & ~(3 << ((index - 16) * 2)));
+}
+
+/**
+ * udc_set_mask_UDCCR - set bits in UDCCR
+ * @udc: udc device
+ * @mask: bits to set in UDCCR
+ *
+ * Sets bits in UDCCR, leaving DME and FST bits as they were.
+ */
+static inline void udc_set_mask_UDCCR(struct pxa_udc *udc, int mask)
+{
+ u32 udccr = udc_readl(udc, UDCCR);
+ udc_writel(udc, UDCCR,
+ (udccr & UDCCR_MASK_BITS) | (mask & UDCCR_MASK_BITS));
+}
+
+/**
+ * udc_clear_mask_UDCCR - clears bits in UDCCR
+ * @udc: udc device
+ * @mask: bit to clear in UDCCR
+ *
+ * Clears bits in UDCCR, leaving DME and FST bits as they were.
+ */
+static inline void udc_clear_mask_UDCCR(struct pxa_udc *udc, int mask)
+{
+ u32 udccr = udc_readl(udc, UDCCR);
+ udc_writel(udc, UDCCR,
+ (udccr & UDCCR_MASK_BITS) & ~(mask & UDCCR_MASK_BITS));
+}
+
+/**
+ * ep_count_bytes_remain - get how many bytes in udc endpoint
+ * @ep: udc endpoint
+ *
+ * Returns number of bytes in OUT fifos. Broken for IN fifos (-EOPNOTSUPP)
+ */
+static int ep_count_bytes_remain(struct pxa_ep *ep)
+{
+ if (ep->dir_in)
+ return -EOPNOTSUPP;
+ return udc_ep_readl(ep, UDCBCR) & 0x3ff;
+}
+
+/**
+ * ep_is_empty - checks if ep has byte ready for reading
+ * @ep: udc endpoint
+ *
+ * If endpoint is the control endpoint, checks if there are bytes in the
+ * control endpoint fifo. If endpoint is a data endpoint, checks if bytes
+ * are ready for reading on OUT endpoint.
+ *
+ * Returns 0 if ep not empty, 1 if ep empty, -EOPNOTSUPP if IN endpoint
+ */
+static int ep_is_empty(struct pxa_ep *ep)
+{
+ int ret;
+
+ if (!is_ep0(ep) && ep->dir_in)
+ return -EOPNOTSUPP;
+ if (is_ep0(ep))
+ ret = !(udc_ep_readl(ep, UDCCSR) & UDCCSR0_RNE);
+ else
+ ret = !(udc_ep_readl(ep, UDCCSR) & UDCCSR_BNE);
+ return ret;
+}
+
+/**
+ * ep_is_full - checks if ep has place to write bytes
+ * @ep: udc endpoint
+ *
+ * If endpoint is not the control endpoint and is an IN endpoint, checks if
+ * there is place to write bytes into the endpoint.
+ *
+ * Returns 0 if ep not full, 1 if ep full, -EOPNOTSUPP if OUT endpoint
+ */
+static int ep_is_full(struct pxa_ep *ep)
+{
+ if (is_ep0(ep))
+ return (udc_ep_readl(ep, UDCCSR) & UDCCSR0_IPR);
+ if (!ep->dir_in)
+ return -EOPNOTSUPP;
+ return (!(udc_ep_readl(ep, UDCCSR) & UDCCSR_BNF));
+}
+
+/**
+ * epout_has_pkt - checks if OUT endpoint fifo has a packet available
+ * @ep: pxa endpoint
+ *
+ * Returns 1 if a complete packet is available, 0 if not, -EOPNOTSUPP for IN ep.
+ */
+static int epout_has_pkt(struct pxa_ep *ep)
+{
+ if (!is_ep0(ep) && ep->dir_in)
+ return -EOPNOTSUPP;
+ if (is_ep0(ep))
+ return (udc_ep_readl(ep, UDCCSR) & UDCCSR0_OPC);
+ return (udc_ep_readl(ep, UDCCSR) & UDCCSR_PC);
+}
+
+/**
+ * set_ep0state - Set ep0 automata state
+ * @dev: udc device
+ * @state: state
+ */
+static void set_ep0state(struct pxa_udc *udc, int state)
+{
+ struct pxa_ep *ep = &udc->pxa_ep[0];
+ char *old_stname = EP0_STNAME(udc);
+
+ udc->ep0state = state;
+ ep_dbg(ep, "state=%s->%s, udccsr0=0x%03x, udcbcr=%d\n", old_stname,
+ EP0_STNAME(udc), udc_ep_readl(ep, UDCCSR),
+ udc_ep_readl(ep, UDCBCR));
+}
+
+/**
+ * ep0_idle - Put control endpoint into idle state
+ * @dev: udc device
+ */
+static void ep0_idle(struct pxa_udc *dev)
+{
+ set_ep0state(dev, WAIT_FOR_SETUP);
+}
+
+/**
+ * inc_ep_stats_reqs - Update ep stats counts
+ * @ep: physical endpoint
+ * @req: usb request
+ * @is_in: ep direction (USB_DIR_IN or 0)
+ *
+ */
+static void inc_ep_stats_reqs(struct pxa_ep *ep, int is_in)
+{
+ if (is_in)
+ ep->stats.in_ops++;
+ else
+ ep->stats.out_ops++;
+}
+
+/**
+ * inc_ep_stats_bytes - Update ep stats counts
+ * @ep: physical endpoint
+ * @count: bytes transfered on endpoint
+ * @req: usb request
+ * @is_in: ep direction (USB_DIR_IN or 0)
+ */
+static void inc_ep_stats_bytes(struct pxa_ep *ep, int count, int is_in)
+{
+ if (is_in)
+ ep->stats.in_bytes += count;
+ else
+ ep->stats.out_bytes += count;
+}
+
+/**
+ * pxa_ep_setup - Sets up an usb physical endpoint
+ * @ep: pxa27x physical endpoint
+ *
+ * Find the physical pxa27x ep, and setup its UDCCR
+ */
+static __init void pxa_ep_setup(struct pxa_ep *ep)
+{
+ u32 new_udccr;
+
+ new_udccr = ((ep->config << UDCCONR_CN_S) & UDCCONR_CN)
+ | ((ep->interface << UDCCONR_IN_S) & UDCCONR_IN)
+ | ((ep->alternate << UDCCONR_AISN_S) & UDCCONR_AISN)
+ | ((EPADDR(ep) << UDCCONR_EN_S) & UDCCONR_EN)
+ | ((EPXFERTYPE(ep) << UDCCONR_ET_S) & UDCCONR_ET)
+ | ((ep->dir_in) ? UDCCONR_ED : 0)
+ | ((ep->fifo_size << UDCCONR_MPS_S) & UDCCONR_MPS)
+ | UDCCONR_EE;
+
+ udc_ep_writel(ep, UDCCR, new_udccr);
+}
+
+/**
+ * pxa_eps_setup - Sets up all usb physical endpoints
+ * @dev: udc device
+ *
+ * Setup all pxa physical endpoints, except ep0
+ */
+static __init void pxa_eps_setup(struct pxa_udc *dev)
+{
+ unsigned int i;
+
+ dev_dbg(dev->dev, "%s: dev=%p\n", __func__, dev);
+
+ for (i = 1; i < NR_PXA_ENDPOINTS; i++)
+ pxa_ep_setup(&dev->pxa_ep[i]);
+}
+
+/**
+ * pxa_ep_alloc_request - Allocate usb request
+ * @_ep: usb endpoint
+ * @gfp_flags:
+ *
+ * For the pxa27x, these can just wrap kmalloc/kfree. gadget drivers
+ * must still pass correctly initialized endpoints, since other controller
+ * drivers may care about how it's currently set up (dma issues etc).
+ */
+static struct usb_request *
+pxa_ep_alloc_request(struct usb_ep *_ep, gfp_t gfp_flags)
+{
+ struct pxa27x_request *req;
+
+ req = kzalloc(sizeof *req, gfp_flags);
+ if (!req || !_ep)
+ return NULL;
+
+ INIT_LIST_HEAD(&req->queue);
+ req->in_use = 0;
+ req->udc_usb_ep = container_of(_ep, struct udc_usb_ep, usb_ep);
+
+ return &req->req;
+}
+
+/**
+ * pxa_ep_free_request - Free usb request
+ * @_ep: usb endpoint
+ * @_req: usb request
+ *
+ * Wrapper around kfree to free _req
+ */
+static void pxa_ep_free_request(struct usb_ep *_ep, struct usb_request *_req)
+{
+ struct pxa27x_request *req;
+
+ req = container_of(_req, struct pxa27x_request, req);
+ WARN_ON(!list_empty(&req->queue));
+ kfree(req);
+}
+
+/**
+ * ep_add_request - add a request to the endpoint's queue
+ * @ep: usb endpoint
+ * @req: usb request
+ *
+ * Context: ep->lock held
+ *
+ * Queues the request in the endpoint's queue, and enables the interrupts
+ * on the endpoint.
+ */
+static void ep_add_request(struct pxa_ep *ep, struct pxa27x_request *req)
+{
+ if (unlikely(!req))
+ return;
+ ep_vdbg(ep, "req:%p, lg=%d, udccsr=0x%03x\n", req,
+ req->req.length, udc_ep_readl(ep, UDCCSR));
+
+ req->in_use = 1;
+ list_add_tail(&req->queue, &ep->queue);
+ pio_irq_enable(ep);
+}
+
+/**
+ * ep_del_request - removes a request from the endpoint's queue
+ * @ep: usb endpoint
+ * @req: usb request
+ *
+ * Context: ep->lock held
+ *
+ * Unqueue the request from the endpoint's queue. If there are no more requests
+ * on the endpoint, and if it's not the control endpoint, interrupts are
+ * disabled on the endpoint.
+ */
+static void ep_del_request(struct pxa_ep *ep, struct pxa27x_request *req)
+{
+ if (unlikely(!req))
+ return;
+ ep_vdbg(ep, "req:%p, lg=%d, udccsr=0x%03x\n", req,
+ req->req.length, udc_ep_readl(ep, UDCCSR));
+
+ list_del_init(&req->queue);
+ req->in_use = 0;
+ if (!is_ep0(ep) && list_empty(&ep->queue))
+ pio_irq_disable(ep);
+}
+
+/**
+ * req_done - Complete an usb request
+ * @ep: pxa physical endpoint
+ * @req: pxa request
+ * @status: usb request status sent to gadget API
+ *
+ * Context: ep->lock held
+ *
+ * Retire a pxa27x usb request. Endpoint must be locked.
+ */
+static void req_done(struct pxa_ep *ep, struct pxa27x_request *req, int status)
+{
+ ep_del_request(ep, req);
+ if (likely(req->req.status == -EINPROGRESS))
+ req->req.status = status;
+ else
+ status = req->req.status;
+
+ if (status && status != -ESHUTDOWN)
+ ep_dbg(ep, "complete req %p stat %d len %u/%u\n",
+ &req->req, status,
+ req->req.actual, req->req.length);
+
+ req->req.complete(&req->udc_usb_ep->usb_ep, &req->req);
+}
+
+/**
+ * ep_end_out_req - Ends control endpoint in request
+ * @ep: physical endpoint
+ * @req: pxa request
+ *
+ * Context: ep->lock held
+ *
+ * Ends endpoint in request (completes usb request).
+ */
+static void ep_end_out_req(struct pxa_ep *ep, struct pxa27x_request *req)
+{
+ inc_ep_stats_reqs(ep, !USB_DIR_IN);
+ req_done(ep, req, 0);
+}
+
+/**
+ * ep0_end_out_req - Ends control endpoint in request (ends data stage)
+ * @ep: physical endpoint
+ * @req: pxa request
+ *
+ * Context: ep->lock held
+ *
+ * Ends control endpoint in request (completes usb request), and puts
+ * control endpoint into idle state
+ */
+static void ep0_end_out_req(struct pxa_ep *ep, struct pxa27x_request *req)
+{
+ set_ep0state(ep->dev, OUT_STATUS_STAGE);
+ ep_end_out_req(ep, req);
+ ep0_idle(ep->dev);
+}
+
+/**
+ * ep_end_in_req - Ends endpoint out request
+ * @ep: physical endpoint
+ * @req: pxa request
+ *
+ * Context: ep->lock held
+ *
+ * Ends endpoint out request (completes usb request).
+ */
+static void ep_end_in_req(struct pxa_ep *ep, struct pxa27x_request *req)
+{
+ inc_ep_stats_reqs(ep, USB_DIR_IN);
+ req_done(ep, req, 0);
+}
+
+/**
+ * ep0_end_in_req - Ends control endpoint out request (ends data stage)
+ * @ep: physical endpoint
+ * @req: pxa request
+ *
+ * Context: ep->lock held
+ *
+ * Ends control endpoint out request (completes usb request), and puts
+ * control endpoint into status state
+ */
+static void ep0_end_in_req(struct pxa_ep *ep, struct pxa27x_request *req)
+{
+ struct pxa_udc *udc = ep->dev;
+
+ set_ep0state(udc, IN_STATUS_STAGE);
+ ep_end_in_req(ep, req);
+}
+
+/**
+ * nuke - Dequeue all requests
+ * @ep: pxa endpoint
+ * @status: usb request status
+ *
+ * Context: ep->lock held
+ *
+ * Dequeues all requests on an endpoint. As a side effect, interrupts will be
+ * disabled on that endpoint (because no more requests).
+ */
+static void nuke(struct pxa_ep *ep, int status)
+{
+ struct pxa27x_request *req;
+
+ while (!list_empty(&ep->queue)) {
+ req = list_entry(ep->queue.next, struct pxa27x_request, queue);
+ req_done(ep, req, status);
+ }
+}
+
+/**
+ * read_packet - transfer 1 packet from an OUT endpoint into request
+ * @ep: pxa physical endpoint
+ * @req: usb request
+ *
+ * Takes bytes from OUT endpoint and transfers them info the usb request.
+ * If there is less space in request than bytes received in OUT endpoint,
+ * bytes are left in the OUT endpoint.
+ *
+ * Returns how many bytes were actually transfered
+ */
+static int read_packet(struct pxa_ep *ep, struct pxa27x_request *req)
+{
+ u32 *buf;
+ int bytes_ep, bufferspace, count, i;
+
+ bytes_ep = ep_count_bytes_remain(ep);
+ bufferspace = req->req.length - req->req.actual;
+
+ buf = (u32 *)(req->req.buf + req->req.actual);
+ prefetchw(buf);
+
+ if (likely(!ep_is_empty(ep)))
+ count = min(bytes_ep, bufferspace);
+ else /* zlp */
+ count = 0;
+
+ for (i = count; i > 0; i -= 4)
+ *buf++ = udc_ep_readl(ep, UDCDR);
+ req->req.actual += count;
+
+ udc_ep_writel(ep, UDCCSR, UDCCSR_PC);
+
+ return count;
+}
+
+/**
+ * write_packet - transfer 1 packet from request into an IN endpoint
+ * @ep: pxa physical endpoint
+ * @req: usb request
+ * @max: max bytes that fit into endpoint
+ *
+ * Takes bytes from usb request, and transfers them into the physical
+ * endpoint. If there are no bytes to transfer, doesn't write anything
+ * to physical endpoint.
+ *
+ * Returns how many bytes were actually transfered.
+ */
+static int write_packet(struct pxa_ep *ep, struct pxa27x_request *req,
+ unsigned int max)
+{
+ int length, count, remain, i;
+ u32 *buf;
+ u8 *buf_8;
+
+ buf = (u32 *)(req->req.buf + req->req.actual);
+ prefetch(buf);
+
+ length = min(req->req.length - req->req.actual, max);
+ req->req.actual += length;
+
+ remain = length & 0x3;
+ count = length & ~(0x3);
+ for (i = count; i > 0 ; i -= 4)
+ udc_ep_writel(ep, UDCDR, *buf++);
+
+ buf_8 = (u8 *)buf;
+ for (i = remain; i > 0; i--)
+ udc_ep_writeb(ep, UDCDR, *buf_8++);
+
+ ep_vdbg(ep, "length=%d+%d, udccsr=0x%03x\n", count, remain,
+ udc_ep_readl(ep, UDCCSR));
+
+ return length;
+}
+
+/**
+ * read_fifo - Transfer packets from OUT endpoint into usb request
+ * @ep: pxa physical endpoint
+ * @req: usb request
+ *
+ * Context: callable when in_interrupt()
+ *
+ * Unload as many packets as possible from the fifo we use for usb OUT
+ * transfers and put them into the request. Caller should have made sure
+ * there's at least one packet ready.
+ * Doesn't complete the request, that's the caller's job
+ *
+ * Returns 1 if the request completed, 0 otherwise
+ */
+static int read_fifo(struct pxa_ep *ep, struct pxa27x_request *req)
+{
+ int count, is_short, completed = 0;
+
+ while (epout_has_pkt(ep)) {
+ count = read_packet(ep, req);
+ inc_ep_stats_bytes(ep, count, !USB_DIR_IN);
+
+ is_short = (count < ep->fifo_size);
+ ep_dbg(ep, "read udccsr:%03x, count:%d bytes%s req %p %d/%d\n",
+ udc_ep_readl(ep, UDCCSR), count, is_short ? "/S" : "",
+ &req->req, req->req.actual, req->req.length);
+
+ /* completion */
+ if (is_short || req->req.actual == req->req.length) {
+ completed = 1;
+ break;
+ }
+ /* finished that packet. the next one may be waiting... */
+ }
+ return completed;
+}
+
+/**
+ * write_fifo - transfer packets from usb request into an IN endpoint
+ * @ep: pxa physical endpoint
+ * @req: pxa usb request
+ *
+ * Write to an IN endpoint fifo, as many packets as possible.
+ * irqs will use this to write the rest later.
+ * caller guarantees at least one packet buffer is ready (or a zlp).
+ * Doesn't complete the request, that's the caller's job
+ *
+ * Returns 1 if request fully transfered, 0 if partial transfer
+ */
+static int write_fifo(struct pxa_ep *ep, struct pxa27x_request *req)
+{
+ unsigned max;
+ int count, is_short, is_last = 0, completed = 0, totcount = 0;
+ u32 udccsr;
+
+ max = ep->fifo_size;
+ do {
+ is_short = 0;
+
+ udccsr = udc_ep_readl(ep, UDCCSR);
+ if (udccsr & UDCCSR_PC) {
+ ep_vdbg(ep, "Clearing Transmit Complete, udccsr=%x\n",
+ udccsr);
+ udc_ep_writel(ep, UDCCSR, UDCCSR_PC);
+ }
+ if (udccsr & UDCCSR_TRN) {
+ ep_vdbg(ep, "Clearing Underrun on, udccsr=%x\n",
+ udccsr);
+ udc_ep_writel(ep, UDCCSR, UDCCSR_TRN);
+ }
+
+ count = write_packet(ep, req, max);
+ inc_ep_stats_bytes(ep, count, USB_DIR_IN);
+ totcount += count;
+
+ /* last packet is usually short (or a zlp) */
+ if (unlikely(count < max)) {
+ is_last = 1;
+ is_short = 1;
+ } else {
+ if (likely(req->req.length > req->req.actual)
+ || req->req.zero)
+ is_last = 0;
+ else
+ is_last = 1;
+ /* interrupt/iso maxpacket may not fill the fifo */
+ is_short = unlikely(max < ep->fifo_size);
+ }
+
+ if (is_short)
+ udc_ep_writel(ep, UDCCSR, UDCCSR_SP);
+
+ /* requests complete when all IN data is in the FIFO */
+ if (is_last) {
+ completed = 1;
+ break;
+ }
+ } while (!ep_is_full(ep));
+
+ ep_dbg(ep, "wrote count:%d bytes%s%s, left:%d req=%p\n",
+ totcount, is_last ? "/L" : "", is_short ? "/S" : "",
+ req->req.length - req->req.actual, &req->req);
+
+ return completed;
+}
+
+/**
+ * read_ep0_fifo - Transfer packets from control endpoint into usb request
+ * @ep: control endpoint
+ * @req: pxa usb request
+ *
+ * Special ep0 version of the above read_fifo. Reads as many bytes from control
+ * endpoint as can be read, and stores them into usb request (limited by request
+ * maximum length).
+ *
+ * Returns 0 if usb request only partially filled, 1 if fully filled
+ */
+static int read_ep0_fifo(struct pxa_ep *ep, struct pxa27x_request *req)
+{
+ int count, is_short, completed = 0;
+
+ while (epout_has_pkt(ep)) {
+ count = read_packet(ep, req);
+ udc_ep_writel(ep, UDCCSR, UDCCSR0_OPC);
+ inc_ep_stats_bytes(ep, count, !USB_DIR_IN);
+
+ is_short = (count < ep->fifo_size);
+ ep_dbg(ep, "read udccsr:%03x, count:%d bytes%s req %p %d/%d\n",
+ udc_ep_readl(ep, UDCCSR), count, is_short ? "/S" : "",
+ &req->req, req->req.actual, req->req.length);
+
+ if (is_short || req->req.actual >= req->req.length) {
+ completed = 1;
+ break;
+ }
+ }
+
+ return completed;
+}
+
+/**
+ * write_ep0_fifo - Send a request to control endpoint (ep0 in)
+ * @ep: control endpoint
+ * @req: request
+ *
+ * Context: callable when in_interrupt()
+ *
+ * Sends a request (or a part of the request) to the control endpoint (ep0 in).
+ * If the request doesn't fit, the remaining part will be sent from irq.
+ * The request is considered fully written only if either :
+ * - last write transfered all remaining bytes, but fifo was not fully filled
+ * - last write was a 0 length write
+ *
+ * Returns 1 if request fully written, 0 if request only partially sent
+ */
+static int write_ep0_fifo(struct pxa_ep *ep, struct pxa27x_request *req)
+{
+ unsigned count;
+ int is_last, is_short;
+
+ count = write_packet(ep, req, EP0_FIFO_SIZE);
+ inc_ep_stats_bytes(ep, count, USB_DIR_IN);
+
+ is_short = (count < EP0_FIFO_SIZE);
+ is_last = ((count == 0) || (count < EP0_FIFO_SIZE));
+
+ /* Sends either a short packet or a 0 length packet */
+ if (unlikely(is_short))
+ udc_ep_writel(ep, UDCCSR, UDCCSR0_IPR);
+
+ ep_dbg(ep, "in %d bytes%s%s, %d left, req=%p, udccsr0=0x%03x\n",
+ count, is_short ? "/S" : "", is_last ? "/L" : "",
+ req->req.length - req->req.actual,
+ &req->req, udc_ep_readl(ep, UDCCSR));
+
+ return is_last;
+}
+
+/**
+ * pxa_ep_queue - Queue a request into an IN endpoint
+ * @_ep: usb endpoint
+ * @_req: usb request
+ * @gfp_flags: flags
+ *
+ * Context: normally called when !in_interrupt, but callable when in_interrupt()
+ * in the special case of ep0 setup :
+ * (irq->handle_ep0_ctrl_req->gadget_setup->pxa_ep_queue)
+ *
+ * Returns 0 if succedeed, error otherwise
+ */
+static int pxa_ep_queue(struct usb_ep *_ep, struct usb_request *_req,
+ gfp_t gfp_flags)
+{
+ struct udc_usb_ep *udc_usb_ep;
+ struct pxa_ep *ep;
+ struct pxa27x_request *req;
+ struct pxa_udc *dev;
+ unsigned long flags;
+ int rc = 0;
+ int is_first_req;
+ unsigned length;
+
+ req = container_of(_req, struct pxa27x_request, req);
+ udc_usb_ep = container_of(_ep, struct udc_usb_ep, usb_ep);
+
+ if (unlikely(!_req || !_req->complete || !_req->buf))
+ return -EINVAL;
+
+ if (unlikely(!_ep))
+ return -EINVAL;
+
+ dev = udc_usb_ep->dev;
+ ep = udc_usb_ep->pxa_ep;
+ if (unlikely(!ep))
+ return -EINVAL;
+
+ dev = ep->dev;
+ if (unlikely(!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN)) {
+ ep_dbg(ep, "bogus device state\n");
+ return -ESHUTDOWN;
+ }
+
+ /* iso is always one packet per request, that's the only way
+ * we can report per-packet status. that also helps with dma.
+ */
+ if (unlikely(EPXFERTYPE_is_ISO(ep)
+ && req->req.length > ep->fifo_size))
+ return -EMSGSIZE;
+
+ spin_lock_irqsave(&ep->lock, flags);
+
+ is_first_req = list_empty(&ep->queue);
+ ep_dbg(ep, "queue req %p(first=%s), len %d buf %p\n",
+ _req, is_first_req ? "yes" : "no",
+ _req->length, _req->buf);
+
+ if (!ep->enabled) {
+ _req->status = -ESHUTDOWN;
+ rc = -ESHUTDOWN;
+ goto out;
+ }
+
+ if (req->in_use) {
+ ep_err(ep, "refusing to queue req %p (already queued)\n", req);
+ goto out;
+ }
+
+ length = _req->length;
+ _req->status = -EINPROGRESS;
+ _req->actual = 0;
+
+ ep_add_request(ep, req);
+
+ if (is_ep0(ep)) {
+ switch (dev->ep0state) {
+ case WAIT_ACK_SET_CONF_INTERF:
+ if (length == 0) {
+ ep_end_in_req(ep, req);
+ } else {
+ ep_err(ep, "got a request of %d bytes while"
+ "in state WATI_ACK_SET_CONF_INTERF\n",
+ length);
+ ep_del_request(ep, req);
+ rc = -EL2HLT;
+ }
+ ep0_idle(ep->dev);
+ break;
+ case IN_DATA_STAGE:
+ if (!ep_is_full(ep))
+ if (write_ep0_fifo(ep, req))
+ ep0_end_in_req(ep, req);
+ break;
+ case OUT_DATA_STAGE:
+ if ((length == 0) || !epout_has_pkt(ep))
+ if (read_ep0_fifo(ep, req))
+ ep0_end_out_req(ep, req);
+ break;
+ default:
+ ep_err(ep, "odd state %s to send me a request\n",
+ EP0_STNAME(ep->dev));
+ ep_del_request(ep, req);
+ rc = -EL2HLT;
+ break;
+ }
+ } else {
+ handle_ep(ep);
+ }
+
+out:
+ spin_unlock_irqrestore(&ep->lock, flags);
+ return rc;
+}
+
+/**
+ * pxa_ep_dequeue - Dequeue one request
+ * @_ep: usb endpoint
+ * @_req: usb request
+ *
+ * Return 0 if no error, -EINVAL or -ECONNRESET otherwise
+ */
+static int pxa_ep_dequeue(struct usb_ep *_ep, struct usb_request *_req)
+{
+ struct pxa_ep *ep;
+ struct udc_usb_ep *udc_usb_ep;
+ struct pxa27x_request *req;
+ unsigned long flags;
+ int rc;
+
+ if (!_ep)
+ return -EINVAL;
+ udc_usb_ep = container_of(_ep, struct udc_usb_ep, usb_ep);
+ ep = udc_usb_ep->pxa_ep;
+ if (!ep || is_ep0(ep))
+ return -EINVAL;
+
+ spin_lock_irqsave(&ep->lock, flags);
+
+ /* make sure it's actually queued on this endpoint */
+ list_for_each_entry(req, &ep->queue, queue) {
+ if (&req->req == _req)
+ break;
+ }
+
+ rc = -EINVAL;
+ if (&req->req != _req)
+ goto out;
+
+ rc = 0;
+ req_done(ep, req, -ECONNRESET);
+out:
+ spin_unlock_irqrestore(&ep->lock, flags);
+ return rc;
+}
+
+/**
+ * pxa_ep_set_halt - Halts operations on one endpoint
+ * @_ep: usb endpoint
+ * @value:
+ *
+ * Returns 0 if no error, -EINVAL, -EROFS, -EAGAIN otherwise
+ */
+static int pxa_ep_set_halt(struct usb_ep *_ep, int value)
+{
+ struct pxa_ep *ep;
+ struct udc_usb_ep *udc_usb_ep;
+ unsigned long flags;
+ int rc;
+
+
+ if (!_ep)
+ return -EINVAL;
+ udc_usb_ep = container_of(_ep, struct udc_usb_ep, usb_ep);
+ ep = udc_usb_ep->pxa_ep;
+ if (!ep || is_ep0(ep))
+ return -EINVAL;
+
+ if (value == 0) {
+ /*
+ * This path (reset toggle+halt) is needed to implement
+ * SET_INTERFACE on normal hardware. but it can't be
+ * done from software on the PXA UDC, and the hardware
+ * forgets to do it as part of SET_INTERFACE automagic.
+ */
+ ep_dbg(ep, "only host can clear halt\n");
+ return -EROFS;
+ }
+
+ spin_lock_irqsave(&ep->lock, flags);
+
+ rc = -EAGAIN;
+ if (ep->dir_in && (ep_is_full(ep) || !list_empty(&ep->queue)))
+ goto out;
+
+ /* FST, FEF bits are the same for control and non control endpoints */
+ rc = 0;
+ udc_ep_writel(ep, UDCCSR, UDCCSR_FST | UDCCSR_FEF);
+ if (is_ep0(ep))
+ set_ep0state(ep->dev, STALL);
+
+out:
+ spin_unlock_irqrestore(&ep->lock, flags);
+ return rc;
+}
+
+/**
+ * pxa_ep_fifo_status - Get how many bytes in physical endpoint
+ * @_ep: usb endpoint
+ *
+ * Returns number of bytes in OUT fifos. Broken for IN fifos.
+ */
+static int pxa_ep_fifo_status(struct usb_ep *_ep)
+{
+ struct pxa_ep *ep;
+ struct udc_usb_ep *udc_usb_ep;
+
+ if (!_ep)
+ return -ENODEV;
+ udc_usb_ep = container_of(_ep, struct udc_usb_ep, usb_ep);
+ ep = udc_usb_ep->pxa_ep;
+ if (!ep || is_ep0(ep))
+ return -ENODEV;
+
+ if (ep->dir_in)
+ return -EOPNOTSUPP;
+ if (ep->dev->gadget.speed == USB_SPEED_UNKNOWN || ep_is_empty(ep))
+ return 0;
+ else
+ return ep_count_bytes_remain(ep) + 1;
+}
+
+/**
+ * pxa_ep_fifo_flush - Flushes one endpoint
+ * @_ep: usb endpoint
+ *
+ * Discards all data in one endpoint(IN or OUT), except control endpoint.
+ */
+static void pxa_ep_fifo_flush(struct usb_ep *_ep)
+{
+ struct pxa_ep *ep;
+ struct udc_usb_ep *udc_usb_ep;
+ unsigned long flags;
+
+ if (!_ep)
+ return;
+ udc_usb_ep = container_of(_ep, struct udc_usb_ep, usb_ep);
+ ep = udc_usb_ep->pxa_ep;
+ if (!ep || is_ep0(ep))
+ return;
+
+ spin_lock_irqsave(&ep->lock, flags);
+
+ if (unlikely(!list_empty(&ep->queue)))
+ ep_dbg(ep, "called while queue list not empty\n");
+ ep_dbg(ep, "called\n");
+
+ /* for OUT, just read and discard the FIFO contents. */
+ if (!ep->dir_in) {
+ while (!ep_is_empty(ep))
+ udc_ep_readl(ep, UDCDR);
+ } else {
+ /* most IN status is the same, but ISO can't stall */
+ udc_ep_writel(ep, UDCCSR,
+ UDCCSR_PC | UDCCSR_FEF | UDCCSR_TRN
+ | (EPXFERTYPE_is_ISO(ep) ? 0 : UDCCSR_SST));
+ }
+
+ spin_unlock_irqrestore(&ep->lock, flags);
+
+ return;
+}
+
+/**
+ * pxa_ep_enable - Enables usb endpoint
+ * @_ep: usb endpoint
+ * @desc: usb endpoint descriptor
+ *
+ * Nothing much to do here, as ep configuration is done once and for all
+ * before udc is enabled. After udc enable, no physical endpoint configuration
+ * can be changed.
+ * Function makes sanity checks and flushes the endpoint.
+ */
+static int pxa_ep_enable(struct usb_ep *_ep,
+ const struct usb_endpoint_descriptor *desc)
+{
+ struct pxa_ep *ep;
+ struct udc_usb_ep *udc_usb_ep;
+ struct pxa_udc *udc;
+
+ if (!_ep || !desc)
+ return -EINVAL;
+
+ udc_usb_ep = container_of(_ep, struct udc_usb_ep, usb_ep);
+ if (udc_usb_ep->pxa_ep) {
+ ep = udc_usb_ep->pxa_ep;
+ ep_warn(ep, "usb_ep %s already enabled, doing nothing\n",
+ _ep->name);
+ } else {
+ ep = find_pxa_ep(udc_usb_ep->dev, udc_usb_ep);
+ }
+
+ if (!ep || is_ep0(ep)) {
+ dev_err(udc_usb_ep->dev->dev,
+ "unable to match pxa_ep for ep %s\n",
+ _ep->name);
+ return -EINVAL;
+ }
+
+ if ((desc->bDescriptorType != USB_DT_ENDPOINT)
+ || (ep->type != usb_endpoint_type(desc))) {
+ ep_err(ep, "type mismatch\n");
+ return -EINVAL;
+ }
+
+ if (ep->fifo_size < le16_to_cpu(desc->wMaxPacketSize)) {
+ ep_err(ep, "bad maxpacket\n");
+ return -ERANGE;
+ }
+
+ udc_usb_ep->pxa_ep = ep;
+ udc = ep->dev;
+
+ if (!udc->driver || udc->gadget.speed == USB_SPEED_UNKNOWN) {
+ ep_err(ep, "bogus device state\n");
+ return -ESHUTDOWN;
+ }
+
+ ep->enabled = 1;
+
+ /* flush fifo (mostly for OUT buffers) */
+ pxa_ep_fifo_flush(_ep);
+
+ ep_dbg(ep, "enabled\n");
+ return 0;
+}
+
+/**
+ * pxa_ep_disable - Disable usb endpoint
+ * @_ep: usb endpoint
+ *
+ * Same as for pxa_ep_enable, no physical endpoint configuration can be
+ * changed.
+ * Function flushes the endpoint and related requests.
+ */
+static int pxa_ep_disable(struct usb_ep *_ep)
+{
+ struct pxa_ep *ep;
+ struct udc_usb_ep *udc_usb_ep;
+ unsigned long flags;
+
+ if (!_ep)
+ return -EINVAL;
+
+ udc_usb_ep = container_of(_ep, struct udc_usb_ep, usb_ep);
+ ep = udc_usb_ep->pxa_ep;
+ if (!ep || is_ep0(ep) || !list_empty(&ep->queue))
+ return -EINVAL;
+
+ spin_lock_irqsave(&ep->lock, flags);
+ ep->enabled = 0;
+ nuke(ep, -ESHUTDOWN);
+ spin_unlock_irqrestore(&ep->lock, flags);
+
+ pxa_ep_fifo_flush(_ep);
+ udc_usb_ep->pxa_ep = NULL;
+
+ ep_dbg(ep, "disabled\n");
+ return 0;
+}
+
+static struct usb_ep_ops pxa_ep_ops = {
+ .enable = pxa_ep_enable,
+ .disable = pxa_ep_disable,
+
+ .alloc_request = pxa_ep_alloc_request,
+ .free_request = pxa_ep_free_request,
+
+ .queue = pxa_ep_queue,
+ .dequeue = pxa_ep_dequeue,
+
+ .set_halt = pxa_ep_set_halt,
+ .fifo_status = pxa_ep_fifo_status,
+ .fifo_flush = pxa_ep_fifo_flush,
+};
+
+
+/**
+ * pxa_udc_get_frame - Returns usb frame number
+ * @_gadget: usb gadget
+ */
+static int pxa_udc_get_frame(struct usb_gadget *_gadget)
+{
+ struct pxa_udc *udc = to_gadget_udc(_gadget);
+
+ return (udc_readl(udc, UDCFNR) & 0x7ff);
+}
+
+/**
+ * pxa_udc_wakeup - Force udc device out of suspend
+ * @_gadget: usb gadget
+ *
+ * Returns 0 if succesfull, error code otherwise
+ */
+static int pxa_udc_wakeup(struct usb_gadget *_gadget)
+{
+ struct pxa_udc *udc = to_gadget_udc(_gadget);
+
+ /* host may not have enabled remote wakeup */
+ if ((udc_readl(udc, UDCCR) & UDCCR_DWRE) == 0)
+ return -EHOSTUNREACH;
+ udc_set_mask_UDCCR(udc, UDCCR_UDR);
+ return 0;
+}
+
+static const struct usb_gadget_ops pxa_udc_ops = {
+ .get_frame = pxa_udc_get_frame,
+ .wakeup = pxa_udc_wakeup,
+ /* current versions must always be self-powered */
+};
+
+/**
+ * udc_disable - disable udc device controller
+ * @udc: udc device
+ *
+ * Disables the udc device : disables clocks, udc interrupts, control endpoint
+ * interrupts.
+ */
+static void udc_disable(struct pxa_udc *udc)
+{
+ udc_writel(udc, UDCICR0, 0);
+ udc_writel(udc, UDCICR1, 0);
+
+ udc_clear_mask_UDCCR(udc, UDCCR_UDE);
+ clk_disable(udc->clk);
+
+ ep0_idle(udc);
+ udc->gadget.speed = USB_SPEED_UNKNOWN;
+ udc->mach->udc_command(PXA2XX_UDC_CMD_DISCONNECT);
+}
+
+/**
+ * udc_init_data - Initialize udc device data structures
+ * @dev: udc device
+ *
+ * Initializes gadget endpoint list, endpoints locks. No action is taken
+ * on the hardware.
+ */
+static __init void udc_init_data(struct pxa_udc *dev)
+{
+ int i;
+ struct pxa_ep *ep;
+
+ /* device/ep0 records init */
+ INIT_LIST_HEAD(&dev->gadget.ep_list);
+ INIT_LIST_HEAD(&dev->gadget.ep0->ep_list);
+ dev->udc_usb_ep[0].pxa_ep = &dev->pxa_ep[0];
+ ep0_idle(dev);
+ strcpy(dev->dev->bus_id, "");
+
+ /* PXA endpoints init */
+ for (i = 0; i < NR_PXA_ENDPOINTS; i++) {
+ ep = &dev->pxa_ep[i];
+
+ ep->enabled = is_ep0(ep);
+ INIT_LIST_HEAD(&ep->queue);
+ spin_lock_init(&ep->lock);
+ }
+
+ /* USB endpoints init */
+ for (i = 0; i < NR_USB_ENDPOINTS; i++)
+ if (i != 0)
+ list_add_tail(&dev->udc_usb_ep[i].usb_ep.ep_list,
+ &dev->gadget.ep_list);
+}
+
+/**
+ * udc_enable - Enables the udc device
+ * @dev: udc device
+ *
+ * Enables the udc device : enables clocks, udc interrupts, control endpoint
+ * interrupts, sets usb as UDC client and setups endpoints.
+ */
+static void udc_enable(struct pxa_udc *udc)
+{
+ udc_writel(udc, UDCICR0, 0);
+ udc_writel(udc, UDCICR1, 0);
+ udc_writel(udc, UP2OCR, UP2OCR_HXOE);
+ udc_clear_mask_UDCCR(udc, UDCCR_UDE);
+
+ clk_enable(udc->clk);
+
+ ep0_idle(udc);
+ udc->gadget.speed = USB_SPEED_FULL;
+ memset(&udc->stats, 0, sizeof(udc->stats));
+
+ udc_set_mask_UDCCR(udc, UDCCR_UDE);
+ udelay(2);
+ if (udc_readl(udc, UDCCR) & UDCCR_EMCE)
+ dev_err(udc->dev, "Configuration errors, udc disabled\n");
+
+ /*
+ * Caller must be able to sleep in order to cope with startup transients
+ */
+ msleep(100);
+
+ /* enable suspend/resume and reset irqs */
+ udc_writel(udc, UDCICR1,
+ UDCICR1_IECC | UDCICR1_IERU
+ | UDCICR1_IESU | UDCICR1_IERS);
+
+ /* enable ep0 irqs */
+ pio_irq_enable(&udc->pxa_ep[0]);
+
+ dev_info(udc->dev, "UDC connecting\n");
+ if (udc->mach->udc_command)
+ udc->mach->udc_command(PXA2XX_UDC_CMD_CONNECT);
+}
+
+/**
+ * usb_gadget_register_driver - Register gadget driver
+ * @driver: gadget driver
+ *
+ * When a driver is successfully registered, it will receive control requests
+ * including set_configuration(), which enables non-control requests. Then
+ * usb traffic follows until a disconnect is reported. Then a host may connect
+ * again, or the driver might get unbound.
+ *
+ * Returns 0 if no error, -EINVAL, -ENODEV, -EBUSY otherwise
+ */
+int usb_gadget_register_driver(struct usb_gadget_driver *driver)
+{
+ struct pxa_udc *udc = the_controller;
+ int retval;
+
+ if (!driver || driver->speed != USB_SPEED_FULL || !driver->bind
+ || !driver->disconnect || !driver->setup)
+ return -EINVAL;
+ if (!udc)
+ return -ENODEV;
+ if (udc->driver)
+ return -EBUSY;
+
+ /* first hook up the driver ... */
+ udc->driver = driver;
+ udc->gadget.dev.driver = &driver->driver;
+
+ retval = device_add(&udc->gadget.dev);
+ if (retval) {
+ dev_err(udc->dev, "device_add error %d\n", retval);
+ goto add_fail;
+ }
+ retval = driver->bind(&udc->gadget);
+ if (retval) {
+ dev_err(udc->dev, "bind to driver %s --> error %d\n",
+ driver->driver.name, retval);
+ goto bind_fail;
+ }
+ dev_dbg(udc->dev, "registered gadget driver '%s'\n",
+ driver->driver.name);
+
+ udc_enable(udc);
+ return 0;
+
+bind_fail:
+ device_del(&udc->gadget.dev);
+add_fail:
+ udc->driver = NULL;
+ udc->gadget.dev.driver = NULL;
+ return retval;
+}
+EXPORT_SYMBOL(usb_gadget_register_driver);
+
+
+/**
+ * stop_activity - Stops udc endpoints
+ * @udc: udc device
+ * @driver: gadget driver
+ *
+ * Disables all udc endpoints (even control endpoint), report disconnect to
+ * the gadget user.
+ */
+static void stop_activity(struct pxa_udc *udc, struct usb_gadget_driver *driver)
+{
+ int i;
+
+ /* don't disconnect drivers more than once */
+ if (udc->gadget.speed == USB_SPEED_UNKNOWN)
+ driver = NULL;
+ udc->gadget.speed = USB_SPEED_UNKNOWN;
+
+ for (i = 0; i < NR_USB_ENDPOINTS; i++)
+ pxa_ep_disable(&udc->udc_usb_ep[i].usb_ep);
+
+ if (driver)
+ driver->disconnect(&udc->gadget);
+}
+
+/**
+ * usb_gadget_unregister_driver - Unregister the gadget driver
+ * @driver: gadget driver
+ *
+ * Returns 0 if no error, -ENODEV, -EINVAL otherwise
+ */
+int usb_gadget_unregister_driver(struct usb_gadget_driver *driver)
+{
+ struct pxa_udc *udc = the_controller;
+
+ if (!udc)
+ return -ENODEV;
+ if (!driver || driver != udc->driver || !driver->unbind)
+ return -EINVAL;
+
+ stop_activity(udc, driver);
+ udc_disable(udc);
+
+ driver->unbind(&udc->gadget);
+ udc->driver = NULL;
+
+ device_del(&udc->gadget.dev);
+
+ dev_info(udc->dev, "unregistered gadget driver '%s'\n",
+ driver->driver.name);
+ return 0;
+}
+EXPORT_SYMBOL(usb_gadget_unregister_driver);
+
+/**
+ * handle_ep0_ctrl_req - handle control endpoint control request
+ * @udc: udc device
+ * @req: control request
+ */
+static void handle_ep0_ctrl_req(struct pxa_udc *udc,
+ struct pxa27x_request *req)
+{
+ struct pxa_ep *ep = &udc->pxa_ep[0];
+ union {
+ struct usb_ctrlrequest r;
+ u32 word[2];
+ } u;
+ int i;
+ int have_extrabytes = 0;
+
+ nuke(ep, -EPROTO);
+
+ /* read SETUP packet */
+ for (i = 0; i < 2; i++) {
+ if (unlikely(ep_is_empty(ep)))
+ goto stall;
+ u.word[i] = udc_ep_readl(ep, UDCDR);
+ }
+
+ have_extrabytes = !ep_is_empty(ep);
+ while (!ep_is_empty(ep)) {
+ i = udc_ep_readl(ep, UDCDR);
+ ep_err(ep, "wrong to have extra bytes for setup : 0x%08x\n", i);
+ }
+
+ le16_to_cpus(&u.r.wValue);
+ le16_to_cpus(&u.r.wIndex);
+ le16_to_cpus(&u.r.wLength);
+
+ ep_dbg(ep, "SETUP %02x.%02x v%04x i%04x l%04x\n",
+ u.r.bRequestType, u.r.bRequest,
+ u.r.wValue, u.r.wIndex, u.r.wLength);
+ if (unlikely(have_extrabytes))
+ goto stall;
+
+ if (u.r.bRequestType & USB_DIR_IN)
+ set_ep0state(udc, IN_DATA_STAGE);
+ else
+ set_ep0state(udc, OUT_DATA_STAGE);
+
+ /* Tell UDC to enter Data Stage */
+ udc_ep_writel(ep, UDCCSR, UDCCSR0_SA | UDCCSR0_OPC);
+
+ i = udc->driver->setup(&udc->gadget, &u.r);
+ if (i < 0)
+ goto stall;
+out:
+ return;
+stall:
+ ep_dbg(ep, "protocol STALL, udccsr0=%03x err %d\n",
+ udc_ep_readl(ep, UDCCSR), i);
+ udc_ep_writel(ep, UDCCSR, UDCCSR0_FST | UDCCSR0_FTF);
+ set_ep0state(udc, STALL);
+ goto out;
+}
+
+/**
+ * handle_ep0 - Handle control endpoint data transfers
+ * @udc: udc device
+ * @fifo_irq: 1 if triggered by fifo service type irq
+ * @opc_irq: 1 if triggered by output packet complete type irq
+ *
+ * Context : when in_interrupt() or with ep->lock held
+ *
+ * Tries to transfer all pending request data into the endpoint and/or
+ * transfer all pending data in the endpoint into usb requests.
+ * Handles states of ep0 automata.
+ *
+ * PXA27x hardware handles several standard usb control requests without
+ * driver notification. The requests fully handled by hardware are :
+ * SET_ADDRESS, SET_FEATURE, CLEAR_FEATURE, GET_CONFIGURATION, GET_INTERFACE,
+ * GET_STATUS
+ * The requests handled by hardware, but with irq notification are :
+ * SYNCH_FRAME, SET_CONFIGURATION, SET_INTERFACE
+ * The remaining standard requests really handled by handle_ep0 are :
+ * GET_DESCRIPTOR, SET_DESCRIPTOR, specific requests.
+ * Requests standardized outside of USB 2.0 chapter 9 are handled more
+ * uniformly, by gadget drivers.
+ *
+ * The control endpoint state machine is _not_ USB spec compliant, it's even
+ * hardly compliant with Intel PXA270 developers guide.
+ * The key points which inferred this state machine are :
+ * - on every setup token, bit UDCCSR0_SA is raised and held until cleared by
+ * software.
+ * - on every OUT packet received, UDCCSR0_OPC is raised and held until
+ * cleared by software.
+ * - clearing UDCCSR0_OPC always flushes ep0. If in setup stage, never do it
+ * before reading ep0.
+ * - irq can be called on a "packet complete" event (opc_irq=1), while
+ * UDCCSR0_OPC is not yet raised (delta can be as big as 100ms
+ * from experimentation).
+ * - as UDCCSR0_SA can be activated while in irq handling, and clearing
+ * UDCCSR0_OPC would flush the setup data, we almost never clear UDCCSR0_OPC
+ * => we never actually read the "status stage" packet of an IN data stage
+ * => this is not documented in Intel documentation
+ * - hardware as no idea of STATUS STAGE, it only handle SETUP STAGE and DATA
+ * STAGE. The driver add STATUS STAGE to send last zero length packet in
+ * OUT_STATUS_STAGE.
+ * - special attention was needed for IN_STATUS_STAGE. If a packet complete
+ * event is detected, we terminate the status stage without ackowledging the
+ * packet (not to risk to loose a potential SETUP packet)
+ */
+static void handle_ep0(struct pxa_udc *udc, int fifo_irq, int opc_irq)
+{
+ u32 udccsr0;
+ struct pxa_ep *ep = &udc->pxa_ep[0];
+ struct pxa27x_request *req = NULL;
+ int completed = 0;
+
+ udccsr0 = udc_ep_readl(ep, UDCCSR);
+ ep_dbg(ep, "state=%s, req=%p, udccsr0=0x%03x, udcbcr=%d, irq_msk=%x\n",
+ EP0_STNAME(udc), req, udccsr0, udc_ep_readl(ep, UDCBCR),
+ (fifo_irq << 1 | opc_irq));
+
+ if (!list_empty(&ep->queue))
+ req = list_entry(ep->queue.next, struct pxa27x_request, queue);
+
+ if (udccsr0 & UDCCSR0_SST) {
+ ep_dbg(ep, "clearing stall status\n");
+ nuke(ep, -EPIPE);
+ udc_ep_writel(ep, UDCCSR, UDCCSR0_SST);
+ ep0_idle(udc);
+ }
+
+ if (udccsr0 & UDCCSR0_SA) {
+ nuke(ep, 0);
+ set_ep0state(udc, SETUP_STAGE);
+ }
+
+ switch (udc->ep0state) {
+ case WAIT_FOR_SETUP:
+ /*
+ * Hardware bug : beware, we cannot clear OPC, since we would
+ * miss a potential OPC irq for a setup packet.
+ * So, we only do ... nothing, and hope for a next irq with
+ * UDCCSR0_SA set.
+ */
+ break;
+ case SETUP_STAGE:
+ udccsr0 &= UDCCSR0_CTRL_REQ_MASK;
+ if (likely(udccsr0 == UDCCSR0_CTRL_REQ_MASK))
+ handle_ep0_ctrl_req(udc, req);
+ break;
+ case IN_DATA_STAGE: /* GET_DESCRIPTOR */
+ if (epout_has_pkt(ep))
+ udc_ep_writel(ep, UDCCSR, UDCCSR0_OPC);
+ if (req && !ep_is_full(ep))
+ completed = write_ep0_fifo(ep, req);
+ if (completed)
+ ep0_end_in_req(ep, req);
+ break;
+ case OUT_DATA_STAGE: /* SET_DESCRIPTOR */
+ if (epout_has_pkt(ep) && req)
+ completed = read_ep0_fifo(ep, req);
+ if (completed)
+ ep0_end_out_req(ep, req);
+ break;
+ case STALL:
+ udc_ep_writel(ep, UDCCSR, UDCCSR0_FST);
+ break;
+ case IN_STATUS_STAGE:
+ /*
+ * Hardware bug : beware, we cannot clear OPC, since we would
+ * miss a potential PC irq for a setup packet.
+ * So, we only put the ep0 into WAIT_FOR_SETUP state.
+ */
+ if (opc_irq)
+ ep0_idle(udc);
+ break;
+ case OUT_STATUS_STAGE:
+ case WAIT_ACK_SET_CONF_INTERF:
+ ep_warn(ep, "should never get in %s state here!!!\n",
+ EP0_STNAME(ep->dev));
+ ep0_idle(udc);
+ break;
+ }
+}
+
+/**
+ * handle_ep - Handle endpoint data tranfers
+ * @ep: pxa physical endpoint
+ *
+ * Tries to transfer all pending request data into the endpoint and/or
+ * transfer all pending data in the endpoint into usb requests.
+ *
+ * Is always called when in_interrupt() or with ep->lock held.
+ */
+static void handle_ep(struct pxa_ep *ep)
+{
+ struct pxa27x_request *req;
+ int completed;
+ u32 udccsr;
+ int is_in = ep->dir_in;
+ int loop = 0;
+
+ do {
+ completed = 0;
+ udccsr = udc_ep_readl(ep, UDCCSR);
+ if (likely(!list_empty(&ep->queue)))
+ req = list_entry(ep->queue.next,
+ struct pxa27x_request, queue);
+ else
+ req = NULL;
+
+ ep_dbg(ep, "req:%p, udccsr 0x%03x loop=%d\n",
+ req, udccsr, loop++);
+
+ if (unlikely(udccsr & (UDCCSR_SST | UDCCSR_TRN)))
+ udc_ep_writel(ep, UDCCSR,
+ udccsr & (UDCCSR_SST | UDCCSR_TRN));
+ if (!req)
+ break;
+
+ if (unlikely(is_in)) {
+ if (likely(!ep_is_full(ep)))
+ completed = write_fifo(ep, req);
+ if (completed)
+ ep_end_in_req(ep, req);
+ } else {
+ if (likely(epout_has_pkt(ep)))
+ completed = read_fifo(ep, req);
+ if (completed)
+ ep_end_out_req(ep, req);
+ }
+ } while (completed);
+}
+
+/**
+ * pxa27x_change_configuration - Handle SET_CONF usb request notification
+ * @udc: udc device
+ * @config: usb configuration
+ *
+ * Post the request to upper level.
+ * Don't use any pxa specific harware configuration capabilities
+ */
+static void pxa27x_change_configuration(struct pxa_udc *udc, int config)
+{
+ struct usb_ctrlrequest req ;
+
+ dev_dbg(udc->dev, "config=%d\n", config);
+
+ udc->config = config;
+ udc->last_interface = 0;
+ udc->last_alternate = 0;
+
+ req.bRequestType = 0;
+ req.bRequest = USB_REQ_SET_CONFIGURATION;
+ req.wValue = config;
+ req.wIndex = 0;
+ req.wLength = 0;
+
+ set_ep0state(udc, WAIT_ACK_SET_CONF_INTERF);
+ udc->driver->setup(&udc->gadget, &req);
+}
+
+/**
+ * pxa27x_change_interface - Handle SET_INTERF usb request notification
+ * @udc: udc device
+ * @iface: interface number
+ * @alt: alternate setting number
+ *
+ * Post the request to upper level.
+ * Don't use any pxa specific harware configuration capabilities
+ */
+static void pxa27x_change_interface(struct pxa_udc *udc, int iface, int alt)
+{
+ struct usb_ctrlrequest req;
+
+ dev_dbg(udc->dev, "interface=%d, alternate setting=%d\n", iface, alt);
+
+ udc->last_interface = iface;
+ udc->last_alternate = alt;
+
+ req.bRequestType = USB_RECIP_INTERFACE;
+ req.bRequest = USB_REQ_SET_INTERFACE;
+ req.wValue = alt;
+ req.wIndex = iface;
+ req.wLength = 0;
+
+ set_ep0state(udc, WAIT_ACK_SET_CONF_INTERF);
+ udc->driver->setup(&udc->gadget, &req);
+}
+
+/*
+ * irq_handle_data - Handle data transfer
+ * @irq: irq IRQ number
+ * @udc: dev pxa_udc device structure
+ *
+ * Called from irq handler, transferts data to or from endpoint to queue
+ */
+static void irq_handle_data(int irq, struct pxa_udc *udc)
+{
+ int i;
+ struct pxa_ep *ep;
+ u32 udcisr0 = udc_readl(udc, UDCISR0) & UDCCISR0_EP_MASK;
+ u32 udcisr1 = udc_readl(udc, UDCISR1) & UDCCISR1_EP_MASK;
+
+ if (udcisr0 & UDCISR_INT_MASK) {
+ udc->pxa_ep[0].stats.irqs++;
+ udc_writel(udc, UDCISR0, UDCISR_INT(0, UDCISR_INT_MASK));
+ handle_ep0(udc, !!(udcisr0 & UDCICR_FIFOERR),
+ !!(udcisr0 & UDCICR_PKTCOMPL));
+ }
+
+ udcisr0 >>= 2;
+ for (i = 1; udcisr0 != 0 && i < 16; udcisr0 >>= 2, i++) {
+ if (!(udcisr0 & UDCISR_INT_MASK))
+ continue;
+
+ udc_writel(udc, UDCISR0, UDCISR_INT(i, UDCISR_INT_MASK));
+ ep = &udc->pxa_ep[i];
+ ep->stats.irqs++;
+ handle_ep(ep);
+ }
+
+ for (i = 16; udcisr1 != 0 && i < 24; udcisr1 >>= 2, i++) {
+ udc_writel(udc, UDCISR1, UDCISR_INT(i - 16, UDCISR_INT_MASK));
+ if (!(udcisr1 & UDCISR_INT_MASK))
+ continue;
+
+ ep = &udc->pxa_ep[i];
+ ep->stats.irqs++;
+ handle_ep(ep);
+ }
+
+}
+
+/**
+ * irq_udc_suspend - Handle IRQ "UDC Suspend"
+ * @udc: udc device
+ */
+static void irq_udc_suspend(struct pxa_udc *udc)
+{
+ udc_writel(udc, UDCISR1, UDCISR1_IRSU);
+ udc->stats.irqs_suspend++;
+
+ if (udc->gadget.speed != USB_SPEED_UNKNOWN
+ && udc->driver && udc->driver->suspend)
+ udc->driver->suspend(&udc->gadget);
+ ep0_idle(udc);
+}
+
+/**
+ * irq_udc_resume - Handle IRQ "UDC Resume"
+ * @udc: udc device
+ */
+static void irq_udc_resume(struct pxa_udc *udc)
+{
+ udc_writel(udc, UDCISR1, UDCISR1_IRRU);
+ udc->stats.irqs_resume++;
+
+ if (udc->gadget.speed != USB_SPEED_UNKNOWN
+ && udc->driver && udc->driver->resume)
+ udc->driver->resume(&udc->gadget);
+}
+
+/**
+ * irq_udc_reconfig - Handle IRQ "UDC Change Configuration"
+ * @udc: udc device
+ */
+static void irq_udc_reconfig(struct pxa_udc *udc)
+{
+ unsigned config, interface, alternate, config_change;
+ u32 udccr = udc_readl(udc, UDCCR);
+
+ udc_writel(udc, UDCISR1, UDCISR1_IRCC);
+ udc->stats.irqs_reconfig++;
+
+ config = (udccr & UDCCR_ACN) >> UDCCR_ACN_S;
+ config_change = (config != udc->config);
+ pxa27x_change_configuration(udc, config);
+
+ interface = (udccr & UDCCR_AIN) >> UDCCR_AIN_S;
+ alternate = (udccr & UDCCR_AAISN) >> UDCCR_AAISN_S;
+ pxa27x_change_interface(udc, interface, alternate);
+
+ if (config_change)
+ update_pxa_ep_matches(udc);
+ udc_set_mask_UDCCR(udc, UDCCR_SMAC);
+}
+
+/**
+ * irq_udc_reset - Handle IRQ "UDC Reset"
+ * @udc: udc device
+ */
+static void irq_udc_reset(struct pxa_udc *udc)
+{
+ u32 udccr = udc_readl(udc, UDCCR);
+ struct pxa_ep *ep = &udc->pxa_ep[0];
+
+ dev_info(udc->dev, "USB reset\n");
+ udc_writel(udc, UDCISR1, UDCISR1_IRRS);
+ udc->stats.irqs_reset++;
+
+ if ((udccr & UDCCR_UDA) == 0) {
+ dev_dbg(udc->dev, "USB reset start\n");
+ stop_activity(udc, udc->driver);
+ }
+ udc->gadget.speed = USB_SPEED_FULL;
+ memset(&udc->stats, 0, sizeof udc->stats);
+
+ nuke(ep, -EPROTO);
+ udc_ep_writel(ep, UDCCSR, UDCCSR0_FTF | UDCCSR0_OPC);
+ ep0_idle(udc);
+}
+
+/**
+ * pxa_udc_irq - Main irq handler
+ * @irq: irq number
+ * @_dev: udc device
+ *
+ * Handles all udc interrupts
+ */
+static irqreturn_t pxa_udc_irq(int irq, void *_dev)
+{
+ struct pxa_udc *udc = _dev;
+ u32 udcisr0 = udc_readl(udc, UDCISR0);
+ u32 udcisr1 = udc_readl(udc, UDCISR1);
+ u32 udccr = udc_readl(udc, UDCCR);
+ u32 udcisr1_spec;
+
+ dev_vdbg(udc->dev, "Interrupt, UDCISR0:0x%08x, UDCISR1:0x%08x, "
+ "UDCCR:0x%08x\n", udcisr0, udcisr1, udccr);
+
+ udcisr1_spec = udcisr1 & 0xf8000000;
+ if (unlikely(udcisr1_spec & UDCISR1_IRSU))
+ irq_udc_suspend(udc);
+ if (unlikely(udcisr1_spec & UDCISR1_IRRU))
+ irq_udc_resume(udc);
+ if (unlikely(udcisr1_spec & UDCISR1_IRCC))
+ irq_udc_reconfig(udc);
+ if (unlikely(udcisr1_spec & UDCISR1_IRRS))
+ irq_udc_reset(udc);
+
+ if ((udcisr0 & UDCCISR0_EP_MASK) | (udcisr1 & UDCCISR1_EP_MASK))
+ irq_handle_data(irq, udc);
+
+ return IRQ_HANDLED;
+}
+
+static struct pxa_udc memory = {
+ .gadget = {
+ .ops = &pxa_udc_ops,
+ .ep0 = &memory.udc_usb_ep[0].usb_ep,
+ .name = driver_name,
+ .dev = {
+ .bus_id = "gadget",
+ },
+ },
+
+ .udc_usb_ep = {
+ USB_EP_CTRL,
+ USB_EP_OUT_BULK(1),
+ USB_EP_IN_BULK(2),
+ USB_EP_IN_ISO(3),
+ USB_EP_OUT_ISO(4),
+ USB_EP_IN_INT(5),
+ },
+
+ .pxa_ep = {
+ PXA_EP_CTRL,
+ /* Endpoints for gadget zero */
+ PXA_EP_OUT_BULK(1, 1, 3, 0, 0),
+ PXA_EP_IN_BULK(2, 2, 3, 0, 0),
+ /* Endpoints for ether gadget, file storage gadget */
+ PXA_EP_OUT_BULK(3, 1, 1, 0, 0),
+ PXA_EP_IN_BULK(4, 2, 1, 0, 0),
+ PXA_EP_IN_ISO(5, 3, 1, 0, 0),
+ PXA_EP_OUT_ISO(6, 4, 1, 0, 0),
+ PXA_EP_IN_INT(7, 5, 1, 0, 0),
+ /* Endpoints for RNDIS, serial */
+ PXA_EP_OUT_BULK(8, 1, 2, 0, 0),
+ PXA_EP_IN_BULK(9, 2, 2, 0, 0),
+ PXA_EP_IN_INT(10, 5, 2, 0, 0),
+ /*
+ * All the following endpoints are only for completion. They
+ * won't never work, as multiple interfaces are really broken on
+ * the pxa.
+ */
+ PXA_EP_OUT_BULK(11, 1, 2, 1, 0),
+ PXA_EP_IN_BULK(12, 2, 2, 1, 0),
+ /* Endpoint for CDC Ether */
+ PXA_EP_OUT_BULK(13, 1, 1, 1, 1),
+ PXA_EP_IN_BULK(14, 2, 1, 1, 1),
+ }
+};
+
+/**
+ * pxa_udc_probe - probes the udc device
+ * @_dev: platform device
+ *
+ * Perform basic init : allocates udc clock, creates sysfs files, requests
+ * irq.
+ */
+static int __init pxa_udc_probe(struct platform_device *pdev)
+{
+ struct resource *regs;
+ struct pxa_udc *udc = &memory;
+ int retval;
+
+ regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!regs)
+ return -ENXIO;
+ udc->irq = platform_get_irq(pdev, 0);
+ if (udc->irq < 0)
+ return udc->irq;
+
+ udc->dev = &pdev->dev;
+ udc->mach = pdev->dev.platform_data;
+
+ udc->clk = clk_get(&pdev->dev, "UDCCLK");
+ if (IS_ERR(udc->clk)) {
+ retval = PTR_ERR(udc->clk);
+ goto err_clk;
+ }
+
+ retval = -ENOMEM;
+ udc->regs = ioremap(regs->start, regs->end - regs->start + 1);
+ if (!udc->regs) {
+ dev_err(&pdev->dev, "Unable to map UDC I/O memory\n");
+ goto err_map;
+ }
+
+ device_initialize(&udc->gadget.dev);
+ udc->gadget.dev.parent = &pdev->dev;
+ udc->gadget.dev.dma_mask = NULL;
+
+ the_controller = udc;
+ platform_set_drvdata(pdev, udc);
+ udc_init_data(udc);
+ pxa_eps_setup(udc);
+
+ /* irq setup after old hardware state is cleaned up */
+ retval = request_irq(udc->irq, pxa_udc_irq,
+ IRQF_SHARED, driver_name, udc);
+ if (retval != 0) {
+ dev_err(udc->dev, "%s: can't get irq %i, err %d\n",
+ driver_name, IRQ_USB, retval);
+ goto err_irq;
+ }
+
+ pxa_init_debugfs(udc);
+ return 0;
+err_irq:
+ iounmap(udc->regs);
+err_map:
+ clk_put(udc->clk);
+ udc->clk = NULL;
+err_clk:
+ return retval;
+}
+
+/**
+ * pxa_udc_remove - removes the udc device driver
+ * @_dev: platform device
+ */
+static int __exit pxa_udc_remove(struct platform_device *_dev)
+{
+ struct pxa_udc *udc = platform_get_drvdata(_dev);
+
+ usb_gadget_unregister_driver(udc->driver);
+ free_irq(udc->irq, udc);
+ pxa_cleanup_debugfs(udc);
+
+ platform_set_drvdata(_dev, NULL);
+ the_controller = NULL;
+ clk_put(udc->clk);
+
+ return 0;
+}
+
+static void pxa_udc_shutdown(struct platform_device *_dev)
+{
+ struct pxa_udc *udc = platform_get_drvdata(_dev);
+
+ udc_disable(udc);
+}
+
+#ifdef CONFIG_PM
+/**
+ * pxa_udc_suspend - Suspend udc device
+ * @_dev: platform device
+ * @state: suspend state
+ *
+ * Suspends udc : saves configuration registers (UDCCR*), then disables the udc
+ * device.
+ */
+static int pxa_udc_suspend(struct platform_device *_dev, pm_message_t state)
+{
+ int i;
+ struct pxa_udc *udc = platform_get_drvdata(_dev);
+ struct pxa_ep *ep;
+
+ ep = &udc->pxa_ep[0];
+ udc->udccsr0 = udc_ep_readl(ep, UDCCSR);
+ for (i = 1; i < NR_PXA_ENDPOINTS; i++) {
+ ep = &udc->pxa_ep[i];
+ ep->udccsr_value = udc_ep_readl(ep, UDCCSR);
+ ep->udccr_value = udc_ep_readl(ep, UDCCR);
+ ep_dbg(ep, "udccsr:0x%03x, udccr:0x%x\n",
+ ep->udccsr_value, ep->udccr_value);
+ }
+
+ udc_disable(udc);
+
+ return 0;
+}
+
+/**
+ * pxa_udc_resume - Resume udc device
+ * @_dev: platform device
+ *
+ * Resumes udc : restores configuration registers (UDCCR*), then enables the udc
+ * device.
+ */
+static int pxa_udc_resume(struct platform_device *_dev)
+{
+ int i;
+ struct pxa_udc *udc = platform_get_drvdata(_dev);
+ struct pxa_ep *ep;
+
+ ep = &udc->pxa_ep[0];
+ udc_ep_writel(ep, UDCCSR, udc->udccsr0 & (UDCCSR0_FST | UDCCSR0_DME));
+ for (i = 1; i < NR_PXA_ENDPOINTS; i++) {
+ ep = &udc->pxa_ep[i];
+ udc_ep_writel(ep, UDCCSR, ep->udccsr_value);
+ udc_ep_writel(ep, UDCCR, ep->udccr_value);
+ ep_dbg(ep, "udccsr:0x%03x, udccr:0x%x\n",
+ ep->udccsr_value, ep->udccr_value);
+ }
+
+ udc_enable(udc);
+ /*
+ * We do not handle OTG yet.
+ *
+ * OTGPH bit is set when sleep mode is entered.
+ * it indicates that OTG pad is retaining its state.
+ * Upon exit from sleep mode and before clearing OTGPH,
+ * Software must configure the USB OTG pad, UDC, and UHC
+ * to the state they were in before entering sleep mode.
+ *
+ * Should be : PSSR |= PSSR_OTGPH;
+ */
+
+ return 0;
+}
+#endif
+
+/* work with hotplug and coldplug */
+MODULE_ALIAS("platform:pxa2xx-udc");
+
+static struct platform_driver udc_driver = {
+ .driver = {
+ .name = "pxa2xx-udc",
+ .owner = THIS_MODULE,
+ },
+ .remove = __exit_p(pxa_udc_remove),
+ .shutdown = pxa_udc_shutdown,
+#ifdef CONFIG_PM
+ .suspend = pxa_udc_suspend,
+ .resume = pxa_udc_resume
+#endif
+};
+
+static int __init udc_init(void)
+{
+ printk(KERN_INFO "%s: version %s\n", driver_name, DRIVER_VERSION);
+ return platform_driver_probe(&udc_driver, pxa_udc_probe);
+}
+module_init(udc_init);
+
+
+static void __exit udc_exit(void)
+{
+ platform_driver_unregister(&udc_driver);
+}
+module_exit(udc_exit);
+
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_AUTHOR("Robert Jarzmik");
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/gadget/pxa27x_udc.h b/drivers/usb/gadget/pxa27x_udc.h
new file mode 100644
index 000000000000..1d1b7936ee11
--- /dev/null
+++ b/drivers/usb/gadget/pxa27x_udc.h
@@ -0,0 +1,487 @@
+/*
+ * linux/drivers/usb/gadget/pxa27x_udc.h
+ * Intel PXA27x on-chip full speed USB device controller
+ *
+ * Inspired by original driver by Frank Becker, David Brownell, and others.
+ * Copyright (C) 2008 Robert Jarzmik
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef __LINUX_USB_GADGET_PXA27X_H
+#define __LINUX_USB_GADGET_PXA27X_H
+
+#include <linux/types.h>
+#include <linux/spinlock.h>
+#include <linux/io.h>
+
+/*
+ * Register definitions
+ */
+/* Offsets */
+#define UDCCR 0x0000 /* UDC Control Register */
+#define UDCICR0 0x0004 /* UDC Interrupt Control Register0 */
+#define UDCICR1 0x0008 /* UDC Interrupt Control Register1 */
+#define UDCISR0 0x000C /* UDC Interrupt Status Register 0 */
+#define UDCISR1 0x0010 /* UDC Interrupt Status Register 1 */
+#define UDCFNR 0x0014 /* UDC Frame Number Register */
+#define UDCOTGICR 0x0018 /* UDC On-The-Go interrupt control */
+#define UP2OCR 0x0020 /* USB Port 2 Output Control register */
+#define UP3OCR 0x0024 /* USB Port 3 Output Control register */
+#define UDCCSRn(x) (0x0100 + ((x)<<2)) /* UDC Control/Status register */
+#define UDCBCRn(x) (0x0200 + ((x)<<2)) /* UDC Byte Count Register */
+#define UDCDRn(x) (0x0300 + ((x)<<2)) /* UDC Data Register */
+#define UDCCRn(x) (0x0400 + ((x)<<2)) /* UDC Control Register */
+
+#define UDCCR_OEN (1 << 31) /* On-the-Go Enable */
+#define UDCCR_AALTHNP (1 << 30) /* A-device Alternate Host Negotiation
+ Protocol Port Support */
+#define UDCCR_AHNP (1 << 29) /* A-device Host Negotiation Protocol
+ Support */
+#define UDCCR_BHNP (1 << 28) /* B-device Host Negotiation Protocol
+ Enable */
+#define UDCCR_DWRE (1 << 16) /* Device Remote Wake-up Enable */
+#define UDCCR_ACN (0x03 << 11) /* Active UDC configuration Number */
+#define UDCCR_ACN_S 11
+#define UDCCR_AIN (0x07 << 8) /* Active UDC interface Number */
+#define UDCCR_AIN_S 8
+#define UDCCR_AAISN (0x07 << 5) /* Active UDC Alternate Interface
+ Setting Number */
+#define UDCCR_AAISN_S 5
+#define UDCCR_SMAC (1 << 4) /* Switch Endpoint Memory to Active
+ Configuration */
+#define UDCCR_EMCE (1 << 3) /* Endpoint Memory Configuration
+ Error */
+#define UDCCR_UDR (1 << 2) /* UDC Resume */
+#define UDCCR_UDA (1 << 1) /* UDC Active */
+#define UDCCR_UDE (1 << 0) /* UDC Enable */
+
+#define UDCICR_INT(n, intr) (((intr) & 0x03) << (((n) & 0x0F) * 2))
+#define UDCICR1_IECC (1 << 31) /* IntEn - Configuration Change */
+#define UDCICR1_IESOF (1 << 30) /* IntEn - Start of Frame */
+#define UDCICR1_IERU (1 << 29) /* IntEn - Resume */
+#define UDCICR1_IESU (1 << 28) /* IntEn - Suspend */
+#define UDCICR1_IERS (1 << 27) /* IntEn - Reset */
+#define UDCICR_FIFOERR (1 << 1) /* FIFO Error interrupt for EP */
+#define UDCICR_PKTCOMPL (1 << 0) /* Packet Complete interrupt for EP */
+#define UDCICR_INT_MASK (UDCICR_FIFOERR | UDCICR_PKTCOMPL)
+
+#define UDCISR_INT(n, intr) (((intr) & 0x03) << (((n) & 0x0F) * 2))
+#define UDCISR1_IRCC (1 << 31) /* IntReq - Configuration Change */
+#define UDCISR1_IRSOF (1 << 30) /* IntReq - Start of Frame */
+#define UDCISR1_IRRU (1 << 29) /* IntReq - Resume */
+#define UDCISR1_IRSU (1 << 28) /* IntReq - Suspend */
+#define UDCISR1_IRRS (1 << 27) /* IntReq - Reset */
+#define UDCISR_INT_MASK (UDCICR_FIFOERR | UDCICR_PKTCOMPL)
+
+#define UDCOTGICR_IESF (1 << 24) /* OTG SET_FEATURE command recvd */
+#define UDCOTGICR_IEXR (1 << 17) /* Extra Transciever Interrupt
+ Rising Edge Interrupt Enable */
+#define UDCOTGICR_IEXF (1 << 16) /* Extra Transciever Interrupt
+ Falling Edge Interrupt Enable */
+#define UDCOTGICR_IEVV40R (1 << 9) /* OTG Vbus Valid 4.0V Rising Edge
+ Interrupt Enable */
+#define UDCOTGICR_IEVV40F (1 << 8) /* OTG Vbus Valid 4.0V Falling Edge
+ Interrupt Enable */
+#define UDCOTGICR_IEVV44R (1 << 7) /* OTG Vbus Valid 4.4V Rising Edge
+ Interrupt Enable */
+#define UDCOTGICR_IEVV44F (1 << 6) /* OTG Vbus Valid 4.4V Falling Edge
+ Interrupt Enable */
+#define UDCOTGICR_IESVR (1 << 5) /* OTG Session Valid Rising Edge
+ Interrupt Enable */
+#define UDCOTGICR_IESVF (1 << 4) /* OTG Session Valid Falling Edge
+ Interrupt Enable */
+#define UDCOTGICR_IESDR (1 << 3) /* OTG A-Device SRP Detect Rising
+ Edge Interrupt Enable */
+#define UDCOTGICR_IESDF (1 << 2) /* OTG A-Device SRP Detect Falling
+ Edge Interrupt Enable */
+#define UDCOTGICR_IEIDR (1 << 1) /* OTG ID Change Rising Edge
+ Interrupt Enable */
+#define UDCOTGICR_IEIDF (1 << 0) /* OTG ID Change Falling Edge
+ Interrupt Enable */
+
+/* Host Port 2 field bits */
+#define UP2OCR_CPVEN (1 << 0) /* Charge Pump Vbus Enable */
+#define UP2OCR_CPVPE (1 << 1) /* Charge Pump Vbus Pulse Enable */
+ /* Transceiver enablers */
+#define UP2OCR_DPPDE (1 << 2) /* D+ Pull Down Enable */
+#define UP2OCR_DMPDE (1 << 3) /* D- Pull Down Enable */
+#define UP2OCR_DPPUE (1 << 4) /* D+ Pull Up Enable */
+#define UP2OCR_DMPUE (1 << 5) /* D- Pull Up Enable */
+#define UP2OCR_DPPUBE (1 << 6) /* D+ Pull Up Bypass Enable */
+#define UP2OCR_DMPUBE (1 << 7) /* D- Pull Up Bypass Enable */
+#define UP2OCR_EXSP (1 << 8) /* External Transceiver Speed Control */
+#define UP2OCR_EXSUS (1 << 9) /* External Transceiver Speed Enable */
+#define UP2OCR_IDON (1 << 10) /* OTG ID Read Enable */
+#define UP2OCR_HXS (1 << 16) /* Transceiver Output Select */
+#define UP2OCR_HXOE (1 << 17) /* Transceiver Output Enable */
+#define UP2OCR_SEOS (1 << 24) /* Single-Ended Output Select */
+
+#define UDCCSR0_SA (1 << 7) /* Setup Active */
+#define UDCCSR0_RNE (1 << 6) /* Receive FIFO Not Empty */
+#define UDCCSR0_FST (1 << 5) /* Force Stall */
+#define UDCCSR0_SST (1 << 4) /* Sent Stall */
+#define UDCCSR0_DME (1 << 3) /* DMA Enable */
+#define UDCCSR0_FTF (1 << 2) /* Flush Transmit FIFO */
+#define UDCCSR0_IPR (1 << 1) /* IN Packet Ready */
+#define UDCCSR0_OPC (1 << 0) /* OUT Packet Complete */
+
+#define UDCCSR_DPE (1 << 9) /* Data Packet Error */
+#define UDCCSR_FEF (1 << 8) /* Flush Endpoint FIFO */
+#define UDCCSR_SP (1 << 7) /* Short Packet Control/Status */
+#define UDCCSR_BNE (1 << 6) /* Buffer Not Empty (IN endpoints) */
+#define UDCCSR_BNF (1 << 6) /* Buffer Not Full (OUT endpoints) */
+#define UDCCSR_FST (1 << 5) /* Force STALL */
+#define UDCCSR_SST (1 << 4) /* Sent STALL */
+#define UDCCSR_DME (1 << 3) /* DMA Enable */
+#define UDCCSR_TRN (1 << 2) /* Tx/Rx NAK */
+#define UDCCSR_PC (1 << 1) /* Packet Complete */
+#define UDCCSR_FS (1 << 0) /* FIFO needs service */
+
+#define UDCCONR_CN (0x03 << 25) /* Configuration Number */
+#define UDCCONR_CN_S 25
+#define UDCCONR_IN (0x07 << 22) /* Interface Number */
+#define UDCCONR_IN_S 22
+#define UDCCONR_AISN (0x07 << 19) /* Alternate Interface Number */
+#define UDCCONR_AISN_S 19
+#define UDCCONR_EN (0x0f << 15) /* Endpoint Number */
+#define UDCCONR_EN_S 15
+#define UDCCONR_ET (0x03 << 13) /* Endpoint Type: */
+#define UDCCONR_ET_S 13
+#define UDCCONR_ET_INT (0x03 << 13) /* Interrupt */
+#define UDCCONR_ET_BULK (0x02 << 13) /* Bulk */
+#define UDCCONR_ET_ISO (0x01 << 13) /* Isochronous */
+#define UDCCONR_ET_NU (0x00 << 13) /* Not used */
+#define UDCCONR_ED (1 << 12) /* Endpoint Direction */
+#define UDCCONR_MPS (0x3ff << 2) /* Maximum Packet Size */
+#define UDCCONR_MPS_S 2
+#define UDCCONR_DE (1 << 1) /* Double Buffering Enable */
+#define UDCCONR_EE (1 << 0) /* Endpoint Enable */
+
+#define UDCCR_MASK_BITS (UDCCR_OEN | UDCCR_SMAC | UDCCR_UDR | UDCCR_UDE)
+#define UDCCSR_WR_MASK (UDCCSR_DME | UDCCSR_FST)
+#define UDC_FNR_MASK (0x7ff)
+#define UDC_BCR_MASK (0x3ff)
+
+/*
+ * UDCCR = UDC Endpoint Configuration Registers
+ * UDCCSR = UDC Control/Status Register for this EP
+ * UDCBCR = UDC Byte Count Remaining (contents of OUT fifo)
+ * UDCDR = UDC Endpoint Data Register (the fifo)
+ */
+#define ofs_UDCCR(ep) (UDCCRn(ep->idx))
+#define ofs_UDCCSR(ep) (UDCCSRn(ep->idx))
+#define ofs_UDCBCR(ep) (UDCBCRn(ep->idx))
+#define ofs_UDCDR(ep) (UDCDRn(ep->idx))
+
+/* Register access macros */
+#define udc_ep_readl(ep, reg) \
+ __raw_readl((ep)->dev->regs + ofs_##reg(ep))
+#define udc_ep_writel(ep, reg, value) \
+ __raw_writel((value), ep->dev->regs + ofs_##reg(ep))
+#define udc_ep_readb(ep, reg) \
+ __raw_readb((ep)->dev->regs + ofs_##reg(ep))
+#define udc_ep_writeb(ep, reg, value) \
+ __raw_writeb((value), ep->dev->regs + ofs_##reg(ep))
+#define udc_readl(dev, reg) \
+ __raw_readl((dev)->regs + (reg))
+#define udc_writel(udc, reg, value) \
+ __raw_writel((value), (udc)->regs + (reg))
+
+#define UDCCSR_MASK (UDCCSR_FST | UDCCSR_DME)
+#define UDCCISR0_EP_MASK ~0
+#define UDCCISR1_EP_MASK 0xffff
+#define UDCCSR0_CTRL_REQ_MASK (UDCCSR0_OPC | UDCCSR0_SA | UDCCSR0_RNE)
+
+#define EPIDX(ep) (ep->idx)
+#define EPADDR(ep) (ep->addr)
+#define EPXFERTYPE(ep) (ep->type)
+#define EPNAME(ep) (ep->name)
+#define is_ep0(ep) (!ep->idx)
+#define EPXFERTYPE_is_ISO(ep) (EPXFERTYPE(ep) == USB_ENDPOINT_XFER_ISOC)
+
+/*
+ * Endpoint definitions
+ *
+ * Once enabled, pxa endpoint configuration is freezed, and cannot change
+ * unless a reset happens or the udc is disabled.
+ * Therefore, we must define all pxa potential endpoint definitions needed for
+ * all gadget and set them up before the udc is enabled.
+ *
+ * As the architecture chosen is fully static, meaning the pxa endpoint
+ * configurations are set up once and for all, we must provide a way to match
+ * one usb endpoint (usb_ep) to several pxa endpoints. The reason is that gadget
+ * layer autoconf doesn't choose the usb_ep endpoint on (config, interface, alt)
+ * criteria, while the pxa architecture requires that.
+ *
+ * The solution is to define several pxa endpoints matching one usb_ep. Ex:
+ * - "ep1-in" matches pxa endpoint EPA (which is an IN ep at addr 1, when
+ * the udc talks on (config=3, interface=0, alt=0)
+ * - "ep1-in" matches pxa endpoint EPB (which is an IN ep at addr 1, when
+ * the udc talks on (config=3, interface=0, alt=1)
+ * - "ep1-in" matches pxa endpoint EPC (which is an IN ep at addr 1, when
+ * the udc talks on (config=2, interface=0, alt=0)
+ *
+ * We'll define the pxa endpoint by its index (EPA => idx=1, EPB => idx=2, ...)
+ */
+
+/*
+ * Endpoint definition helpers
+ */
+#define USB_EP_DEF(addr, bname, dir, type, maxpkt) \
+{ .usb_ep = { .name = bname, .ops = &pxa_ep_ops, .maxpacket = maxpkt, }, \
+ .desc = { .bEndpointAddress = addr | (dir ? USB_DIR_IN : 0), \
+ .bmAttributes = type, \
+ .wMaxPacketSize = maxpkt, }, \
+ .dev = &memory \
+}
+#define USB_EP_BULK(addr, bname, dir) \
+ USB_EP_DEF(addr, bname, dir, USB_ENDPOINT_XFER_BULK, BULK_FIFO_SIZE)
+#define USB_EP_ISO(addr, bname, dir) \
+ USB_EP_DEF(addr, bname, dir, USB_ENDPOINT_XFER_ISOC, ISO_FIFO_SIZE)
+#define USB_EP_INT(addr, bname, dir) \
+ USB_EP_DEF(addr, bname, dir, USB_ENDPOINT_XFER_INT, INT_FIFO_SIZE)
+#define USB_EP_IN_BULK(n) USB_EP_BULK(n, "ep" #n "in-bulk", 1)
+#define USB_EP_OUT_BULK(n) USB_EP_BULK(n, "ep" #n "out-bulk", 0)
+#define USB_EP_IN_ISO(n) USB_EP_ISO(n, "ep" #n "in-iso", 1)
+#define USB_EP_OUT_ISO(n) USB_EP_ISO(n, "ep" #n "out-iso", 0)
+#define USB_EP_IN_INT(n) USB_EP_INT(n, "ep" #n "in-int", 1)
+#define USB_EP_CTRL USB_EP_DEF(0, "ep0", 0, 0, EP0_FIFO_SIZE)
+
+#define PXA_EP_DEF(_idx, _addr, dir, _type, maxpkt, _config, iface, altset) \
+{ \
+ .dev = &memory, \
+ .name = "ep" #_idx, \
+ .idx = _idx, .enabled = 0, \
+ .dir_in = dir, .addr = _addr, \
+ .config = _config, .interface = iface, .alternate = altset, \
+ .type = _type, .fifo_size = maxpkt, \
+}
+#define PXA_EP_BULK(_idx, addr, dir, config, iface, alt) \
+ PXA_EP_DEF(_idx, addr, dir, USB_ENDPOINT_XFER_BULK, BULK_FIFO_SIZE, \
+ config, iface, alt)
+#define PXA_EP_ISO(_idx, addr, dir, config, iface, alt) \
+ PXA_EP_DEF(_idx, addr, dir, USB_ENDPOINT_XFER_ISOC, ISO_FIFO_SIZE, \
+ config, iface, alt)
+#define PXA_EP_INT(_idx, addr, dir, config, iface, alt) \
+ PXA_EP_DEF(_idx, addr, dir, USB_ENDPOINT_XFER_INT, INT_FIFO_SIZE, \
+ config, iface, alt)
+#define PXA_EP_IN_BULK(i, adr, c, f, a) PXA_EP_BULK(i, adr, 1, c, f, a)
+#define PXA_EP_OUT_BULK(i, adr, c, f, a) PXA_EP_BULK(i, adr, 0, c, f, a)
+#define PXA_EP_IN_ISO(i, adr, c, f, a) PXA_EP_ISO(i, adr, 1, c, f, a)
+#define PXA_EP_OUT_ISO(i, adr, c, f, a) PXA_EP_ISO(i, adr, 0, c, f, a)
+#define PXA_EP_IN_INT(i, adr, c, f, a) PXA_EP_INT(i, adr, 1, c, f, a)
+#define PXA_EP_CTRL PXA_EP_DEF(0, 0, 0, 0, EP0_FIFO_SIZE, 0, 0, 0)
+
+struct pxa27x_udc;
+
+struct stats {
+ unsigned long in_ops;
+ unsigned long out_ops;
+ unsigned long in_bytes;
+ unsigned long out_bytes;
+ unsigned long irqs;
+};
+
+/**
+ * struct udc_usb_ep - container of each usb_ep structure
+ * @usb_ep: usb endpoint
+ * @desc: usb descriptor, especially type and address
+ * @dev: udc managing this endpoint
+ * @pxa_ep: matching pxa_ep (cache of find_pxa_ep() call)
+ */
+struct udc_usb_ep {
+ struct usb_ep usb_ep;
+ struct usb_endpoint_descriptor desc;
+ struct pxa_udc *dev;
+ struct pxa_ep *pxa_ep;
+};
+
+/**
+ * struct pxa_ep - pxa endpoint
+ * @dev: udc device
+ * @queue: requests queue
+ * @lock: lock to pxa_ep data (queues and stats)
+ * @enabled: true when endpoint enabled (not stopped by gadget layer)
+ * @idx: endpoint index (1 => epA, 2 => epB, ..., 24 => epX)
+ * @name: endpoint name (for trace/debug purpose)
+ * @dir_in: 1 if IN endpoint, 0 if OUT endpoint
+ * @addr: usb endpoint number
+ * @config: configuration in which this endpoint is active
+ * @interface: interface in which this endpoint is active
+ * @alternate: altsetting in which this endpoitn is active
+ * @fifo_size: max packet size in the endpoint fifo
+ * @type: endpoint type (bulk, iso, int, ...)
+ * @udccsr_value: save register of UDCCSR0 for suspend/resume
+ * @udccr_value: save register of UDCCR for suspend/resume
+ * @stats: endpoint statistics
+ *
+ * The *PROBLEM* is that pxa's endpoint configuration scheme is both misdesigned
+ * (cares about config/interface/altsetting, thus placing needless limits on
+ * device capability) and full of implementation bugs forcing it to be set up
+ * for use more or less like a pxa255.
+ *
+ * As we define the pxa_ep statically, we must guess all needed pxa_ep for all
+ * gadget which may work with this udc driver.
+ */
+struct pxa_ep {
+ struct pxa_udc *dev;
+
+ struct list_head queue;
+ spinlock_t lock; /* Protects this structure */
+ /* (queues, stats) */
+ unsigned enabled:1;
+
+ unsigned idx:5;
+ char *name;
+
+ /*
+ * Specific pxa endpoint data, needed for hardware initialization
+ */
+ unsigned dir_in:1;
+ unsigned addr:3;
+ unsigned config:2;
+ unsigned interface:3;
+ unsigned alternate:3;
+ unsigned fifo_size;
+ unsigned type;
+
+#ifdef CONFIG_PM
+ u32 udccsr_value;
+ u32 udccr_value;
+#endif
+ struct stats stats;
+};
+
+/**
+ * struct pxa27x_request - container of each usb_request structure
+ * @req: usb request
+ * @udc_usb_ep: usb endpoint the request was submitted on
+ * @in_use: sanity check if request already queued on an pxa_ep
+ * @queue: linked list of requests, linked on pxa_ep->queue
+ */
+struct pxa27x_request {
+ struct usb_request req;
+ struct udc_usb_ep *udc_usb_ep;
+ unsigned in_use:1;
+ struct list_head queue;
+};
+
+enum ep0_state {
+ WAIT_FOR_SETUP,
+ SETUP_STAGE,
+ IN_DATA_STAGE,
+ OUT_DATA_STAGE,
+ IN_STATUS_STAGE,
+ OUT_STATUS_STAGE,
+ STALL,
+ WAIT_ACK_SET_CONF_INTERF
+};
+
+static char *ep0_state_name[] = {
+ "WAIT_FOR_SETUP", "SETUP_STAGE", "IN_DATA_STAGE", "OUT_DATA_STAGE",
+ "IN_STATUS_STAGE", "OUT_STATUS_STAGE", "STALL",
+ "WAIT_ACK_SET_CONF_INTERF"
+};
+#define EP0_STNAME(udc) ep0_state_name[(udc)->ep0state]
+
+#define EP0_FIFO_SIZE 16U
+#define BULK_FIFO_SIZE 64U
+#define ISO_FIFO_SIZE 256U
+#define INT_FIFO_SIZE 16U
+
+struct udc_stats {
+ unsigned long irqs_reset;
+ unsigned long irqs_suspend;
+ unsigned long irqs_resume;
+ unsigned long irqs_reconfig;
+};
+
+#define NR_USB_ENDPOINTS (1 + 5) /* ep0 + ep1in-bulk + .. + ep3in-iso */
+#define NR_PXA_ENDPOINTS (1 + 14) /* ep0 + epA + epB + .. + epX */
+
+/**
+ * struct pxa_udc - udc structure
+ * @regs: mapped IO space
+ * @irq: udc irq
+ * @clk: udc clock
+ * @usb_gadget: udc gadget structure
+ * @driver: bound gadget (zero, g_ether, g_file_storage, ...)
+ * @dev: device
+ * @mach: machine info, used to activate specific GPIO
+ * @ep0state: control endpoint state machine state
+ * @stats: statistics on udc usage
+ * @udc_usb_ep: array of usb endpoints offered by the gadget
+ * @pxa_ep: array of pxa available endpoints
+ * @config: UDC active configuration
+ * @last_interface: UDC interface of the last SET_INTERFACE host request
+ * @last_alternate: UDC altsetting of the last SET_INTERFACE host request
+ * @udccsr0: save of udccsr0 in case of suspend
+ * @debugfs_root: root entry of debug filesystem
+ * @debugfs_state: debugfs entry for "udcstate"
+ * @debugfs_queues: debugfs entry for "queues"
+ * @debugfs_eps: debugfs entry for "epstate"
+ */
+struct pxa_udc {
+ void __iomem *regs;
+ int irq;
+ struct clk *clk;
+
+ struct usb_gadget gadget;
+ struct usb_gadget_driver *driver;
+ struct device *dev;
+ struct pxa2xx_udc_mach_info *mach;
+
+ enum ep0_state ep0state;
+ struct udc_stats stats;
+
+ struct udc_usb_ep udc_usb_ep[NR_USB_ENDPOINTS];
+ struct pxa_ep pxa_ep[NR_PXA_ENDPOINTS];
+
+ unsigned config:2;
+ unsigned last_interface:3;
+ unsigned last_alternate:3;
+
+#ifdef CONFIG_PM
+ unsigned udccsr0;
+#endif
+#ifdef CONFIG_USB_GADGET_DEBUG_FS
+ struct dentry *debugfs_root;
+ struct dentry *debugfs_state;
+ struct dentry *debugfs_queues;
+ struct dentry *debugfs_eps;
+#endif
+};
+
+static inline struct pxa_udc *to_gadget_udc(struct usb_gadget *gadget)
+{
+ return container_of(gadget, struct pxa_udc, gadget);
+}
+
+/*
+ * Debugging/message support
+ */
+#define ep_dbg(ep, fmt, arg...) \
+ dev_dbg(ep->dev->dev, "%s:%s: " fmt, EPNAME(ep), __func__, ## arg)
+#define ep_vdbg(ep, fmt, arg...) \
+ dev_vdbg(ep->dev->dev, "%s:%s: " fmt, EPNAME(ep), __func__, ## arg)
+#define ep_err(ep, fmt, arg...) \
+ dev_err(ep->dev->dev, "%s:%s: " fmt, EPNAME(ep), __func__, ## arg)
+#define ep_info(ep, fmt, arg...) \
+ dev_info(ep->dev->dev, "%s:%s: " fmt, EPNAME(ep), __func__, ## arg)
+#define ep_warn(ep, fmt, arg...) \
+ dev_warn(ep->dev->dev, "%s:%s:" fmt, EPNAME(ep), __func__, ## arg)
+
+#endif /* __LINUX_USB_GADGET_PXA27X_H */
diff --git a/drivers/usb/gadget/serial.c b/drivers/usb/gadget/serial.c
index 8d158e5640e3..54cdd6f94034 100644
--- a/drivers/usb/gadget/serial.c
+++ b/drivers/usb/gadget/serial.c
@@ -135,7 +135,10 @@ struct gs_port {
int port_in_use; /* open/close in progress */
wait_queue_head_t port_write_wait;/* waiting to write */
struct gs_buf *port_write_buf;
- struct usb_cdc_line_coding port_line_coding;
+ struct usb_cdc_line_coding port_line_coding; /* 8-N-1 etc */
+ u16 port_handshake_bits;
+#define RS232_RTS (1 << 1)
+#define RS232_DTE (1 << 0)
};
/* the device structure holds info for the USB device */
@@ -199,6 +202,8 @@ static int gs_setup_standard(struct usb_gadget *gadget,
static int gs_setup_class(struct usb_gadget *gadget,
const struct usb_ctrlrequest *ctrl);
static void gs_setup_complete(struct usb_ep *ep, struct usb_request *req);
+static void gs_setup_complete_set_line_coding(struct usb_ep *ep,
+ struct usb_request *req);
static void gs_disconnect(struct usb_gadget *gadget);
static int gs_set_config(struct gs_dev *dev, unsigned config);
static void gs_reset_config(struct gs_dev *dev);
@@ -406,7 +411,7 @@ static struct usb_cdc_acm_descriptor gs_acm_descriptor = {
.bLength = sizeof(gs_acm_descriptor),
.bDescriptorType = USB_DT_CS_INTERFACE,
.bDescriptorSubType = USB_CDC_ACM_TYPE,
- .bmCapabilities = 0,
+ .bmCapabilities = (1 << 1),
};
static const struct usb_cdc_union_desc gs_union_desc = {
@@ -1502,6 +1507,8 @@ static int gs_setup(struct usb_gadget *gadget,
u16 wValue = le16_to_cpu(ctrl->wValue);
u16 wLength = le16_to_cpu(ctrl->wLength);
+ req->complete = gs_setup_complete;
+
switch (ctrl->bRequestType & USB_TYPE_MASK) {
case USB_TYPE_STANDARD:
ret = gs_setup_standard(gadget,ctrl);
@@ -1679,18 +1686,14 @@ static int gs_setup_class(struct usb_gadget *gadget,
switch (ctrl->bRequest) {
case USB_CDC_REQ_SET_LINE_CODING:
- /* FIXME Submit req to read the data; have its completion
- * handler copy that data to port->port_line_coding (iff
- * it's valid) and maybe pass it on. Until then, fail.
- */
- pr_warning("gs_setup: set_line_coding "
- "unuspported\n");
+ if (wLength != sizeof(struct usb_cdc_line_coding))
+ break;
+ ret = wLength;
+ req->complete = gs_setup_complete_set_line_coding;
break;
case USB_CDC_REQ_GET_LINE_CODING:
- port = dev->dev_port[0]; /* ACM only has one port */
- ret = min(wLength,
- (u16)sizeof(struct usb_cdc_line_coding));
+ ret = min_t(int, wLength, sizeof(struct usb_cdc_line_coding));
if (port) {
spin_lock(&port->port_lock);
memcpy(req->buf, &port->port_line_coding, ret);
@@ -1699,15 +1702,27 @@ static int gs_setup_class(struct usb_gadget *gadget,
break;
case USB_CDC_REQ_SET_CONTROL_LINE_STATE:
- /* FIXME Submit req to read the data; have its completion
- * handler use that to set the state (iff it's valid) and
- * maybe pass it on. Until then, fail.
- */
- pr_warning("gs_setup: set_control_line_state "
- "unuspported\n");
+ if (wLength != 0)
+ break;
+ ret = 0;
+ if (port) {
+ /* REVISIT: we currently just remember this data.
+ * If we change that, update whatever hardware needs
+ * updating.
+ */
+ spin_lock(&port->port_lock);
+ port->port_handshake_bits = wValue;
+ spin_unlock(&port->port_lock);
+ }
break;
default:
+ /* NOTE: strictly speaking, we should accept AT-commands
+ * using SEND_ENCPSULATED_COMMAND/GET_ENCAPSULATED_RESPONSE.
+ * But our call management descriptor says we don't handle
+ * call management, so we should be able to get by without
+ * handling those "required" commands (except by stalling).
+ */
pr_err("gs_setup: unknown class request, "
"type=%02x, request=%02x, value=%04x, "
"index=%04x, length=%d\n",
@@ -1719,6 +1734,42 @@ static int gs_setup_class(struct usb_gadget *gadget,
return ret;
}
+static void gs_setup_complete_set_line_coding(struct usb_ep *ep,
+ struct usb_request *req)
+{
+ struct gs_dev *dev = ep->driver_data;
+ struct gs_port *port = dev->dev_port[0]; /* ACM only has one port */
+
+ switch (req->status) {
+ case 0:
+ /* normal completion */
+ if (req->actual != sizeof(port->port_line_coding))
+ usb_ep_set_halt(ep);
+ else if (port) {
+ struct usb_cdc_line_coding *value = req->buf;
+
+ /* REVISIT: we currently just remember this data.
+ * If we change that, (a) validate it first, then
+ * (b) update whatever hardware needs updating.
+ */
+ spin_lock(&port->port_lock);
+ port->port_line_coding = *value;
+ spin_unlock(&port->port_lock);
+ }
+ break;
+
+ case -ESHUTDOWN:
+ /* disconnect */
+ gs_free_req(ep, req);
+ break;
+
+ default:
+ /* unexpected */
+ break;
+ }
+ return;
+}
+
/*
* gs_setup_complete
*/
@@ -1906,6 +1957,11 @@ static int gs_set_config(struct gs_dev *dev, unsigned config)
}
}
+ /* REVISIT the ACM mode should be able to actually *issue* some
+ * notifications, for at least serial state change events if
+ * not also for network connection; say so in bmCapabilities.
+ */
+
pr_info("gs_set_config: %s configured, %s speed %s config\n",
GS_LONG_NAME,
gadget->speed == USB_SPEED_HIGH ? "high" : "full",
diff --git a/drivers/usb/gadget/zero.c b/drivers/usb/gadget/zero.c
index d3d4f4048e6c..fce4924dbbe8 100644
--- a/drivers/usb/gadget/zero.c
+++ b/drivers/usb/gadget/zero.c
@@ -23,9 +23,7 @@
/*
* Gadget Zero only needs two bulk endpoints, and is an example of how you
* can write a hardware-agnostic gadget driver running inside a USB device.
- *
- * Hardware details are visible (see CONFIG_USB_ZERO_* below) but don't
- * affect most of the driver.
+ * Some hardware details are visible, but don't affect most of the driver.
*
* Use it with the Linux host/master side "usbtest" driver to get a basic
* functional test of your device-side usb stack, or with "usb-skeleton".
@@ -37,6 +35,7 @@
* buflen=N default N=4096, buffer size used
* qlen=N default N=32, how many buffers in the loopback queue
* loopdefault default false, list loopback config first
+ * autoresume=N default N=0, seconds before triggering remote wakeup
*
* Many drivers will only have one configuration, letting them be much
* simpler if they also don't support high speed operation (like this
@@ -62,13 +61,13 @@
/*-------------------------------------------------------------------------*/
-#define DRIVER_VERSION "Lughnasadh, 2007"
+#define DRIVER_VERSION "Earth Day 2008"
-static const char shortname [] = "zero";
-static const char longname [] = "Gadget Zero";
+static const char shortname[] = "zero";
+static const char longname[] = "Gadget Zero";
-static const char source_sink [] = "source and sink data";
-static const char loopback [] = "loop input to output";
+static const char source_sink[] = "source and sink data";
+static const char loopback[] = "loop input to output";
/*-------------------------------------------------------------------------*/
@@ -120,16 +119,16 @@ static unsigned buflen = 4096;
static unsigned qlen = 32;
static unsigned pattern = 0;
-module_param (buflen, uint, S_IRUGO);
-module_param (qlen, uint, S_IRUGO);
-module_param (pattern, uint, S_IRUGO|S_IWUSR);
+module_param(buflen, uint, S_IRUGO);
+module_param(qlen, uint, S_IRUGO);
+module_param(pattern, uint, S_IRUGO|S_IWUSR);
/*
* if it's nonzero, autoresume says how many seconds to wait
* before trying to wake up the host after suspend.
*/
static unsigned autoresume = 0;
-module_param (autoresume, uint, 0);
+module_param(autoresume, uint, 0);
/*
* Normally the "loopback" configuration is second (index 1) so
@@ -138,8 +137,7 @@ module_param (autoresume, uint, 0);
* Or controllers (like superh) that only support one config.
*/
static int loopdefault = 0;
-
-module_param (loopdefault, bool, S_IRUGO|S_IWUSR);
+module_param(loopdefault, bool, S_IRUGO|S_IWUSR);
/*-------------------------------------------------------------------------*/
@@ -176,24 +174,22 @@ module_param (loopdefault, bool, S_IRUGO|S_IWUSR);
#define CONFIG_SOURCE_SINK 3
#define CONFIG_LOOPBACK 2
-static struct usb_device_descriptor
-device_desc = {
+static struct usb_device_descriptor device_desc = {
.bLength = sizeof device_desc,
.bDescriptorType = USB_DT_DEVICE,
- .bcdUSB = __constant_cpu_to_le16 (0x0200),
+ .bcdUSB = __constant_cpu_to_le16(0x0200),
.bDeviceClass = USB_CLASS_VENDOR_SPEC,
- .idVendor = __constant_cpu_to_le16 (DRIVER_VENDOR_NUM),
- .idProduct = __constant_cpu_to_le16 (DRIVER_PRODUCT_NUM),
+ .idVendor = __constant_cpu_to_le16(DRIVER_VENDOR_NUM),
+ .idProduct = __constant_cpu_to_le16(DRIVER_PRODUCT_NUM),
.iManufacturer = STRING_MANUFACTURER,
.iProduct = STRING_PRODUCT,
.iSerialNumber = STRING_SERIAL,
.bNumConfigurations = 2,
};
-static struct usb_config_descriptor
-source_sink_config = {
+static struct usb_config_descriptor source_sink_config = {
.bLength = sizeof source_sink_config,
.bDescriptorType = USB_DT_CONFIG,
@@ -205,8 +201,7 @@ source_sink_config = {
.bMaxPower = 1, /* self-powered */
};
-static struct usb_config_descriptor
-loopback_config = {
+static struct usb_config_descriptor loopback_config = {
.bLength = sizeof loopback_config,
.bDescriptorType = USB_DT_CONFIG,
@@ -218,8 +213,7 @@ loopback_config = {
.bMaxPower = 1, /* self-powered */
};
-static struct usb_otg_descriptor
-otg_descriptor = {
+static struct usb_otg_descriptor otg_descriptor = {
.bLength = sizeof otg_descriptor,
.bDescriptorType = USB_DT_OTG,
@@ -228,8 +222,7 @@ otg_descriptor = {
/* one interface in each configuration */
-static const struct usb_interface_descriptor
-source_sink_intf = {
+static const struct usb_interface_descriptor source_sink_intf = {
.bLength = sizeof source_sink_intf,
.bDescriptorType = USB_DT_INTERFACE,
@@ -238,8 +231,7 @@ source_sink_intf = {
.iInterface = STRING_SOURCE_SINK,
};
-static const struct usb_interface_descriptor
-loopback_intf = {
+static const struct usb_interface_descriptor loopback_intf = {
.bLength = sizeof loopback_intf,
.bDescriptorType = USB_DT_INTERFACE,
@@ -250,8 +242,7 @@ loopback_intf = {
/* two full speed bulk endpoints; their use is config-dependent */
-static struct usb_endpoint_descriptor
-fs_source_desc = {
+static struct usb_endpoint_descriptor fs_source_desc = {
.bLength = USB_DT_ENDPOINT_SIZE,
.bDescriptorType = USB_DT_ENDPOINT,
@@ -259,8 +250,7 @@ fs_source_desc = {
.bmAttributes = USB_ENDPOINT_XFER_BULK,
};
-static struct usb_endpoint_descriptor
-fs_sink_desc = {
+static struct usb_endpoint_descriptor fs_sink_desc = {
.bLength = USB_DT_ENDPOINT_SIZE,
.bDescriptorType = USB_DT_ENDPOINT,
@@ -268,7 +258,7 @@ fs_sink_desc = {
.bmAttributes = USB_ENDPOINT_XFER_BULK,
};
-static const struct usb_descriptor_header *fs_source_sink_function [] = {
+static const struct usb_descriptor_header *fs_source_sink_function[] = {
(struct usb_descriptor_header *) &otg_descriptor,
(struct usb_descriptor_header *) &source_sink_intf,
(struct usb_descriptor_header *) &fs_sink_desc,
@@ -276,7 +266,7 @@ static const struct usb_descriptor_header *fs_source_sink_function [] = {
NULL,
};
-static const struct usb_descriptor_header *fs_loopback_function [] = {
+static const struct usb_descriptor_header *fs_loopback_function[] = {
(struct usb_descriptor_header *) &otg_descriptor,
(struct usb_descriptor_header *) &loopback_intf,
(struct usb_descriptor_header *) &fs_sink_desc,
@@ -293,36 +283,33 @@ static const struct usb_descriptor_header *fs_loopback_function [] = {
* for the config descriptor.
*/
-static struct usb_endpoint_descriptor
-hs_source_desc = {
+static struct usb_endpoint_descriptor hs_source_desc = {
.bLength = USB_DT_ENDPOINT_SIZE,
.bDescriptorType = USB_DT_ENDPOINT,
.bmAttributes = USB_ENDPOINT_XFER_BULK,
- .wMaxPacketSize = __constant_cpu_to_le16 (512),
+ .wMaxPacketSize = __constant_cpu_to_le16(512),
};
-static struct usb_endpoint_descriptor
-hs_sink_desc = {
+static struct usb_endpoint_descriptor hs_sink_desc = {
.bLength = USB_DT_ENDPOINT_SIZE,
.bDescriptorType = USB_DT_ENDPOINT,
.bmAttributes = USB_ENDPOINT_XFER_BULK,
- .wMaxPacketSize = __constant_cpu_to_le16 (512),
+ .wMaxPacketSize = __constant_cpu_to_le16(512),
};
-static struct usb_qualifier_descriptor
-dev_qualifier = {
+static struct usb_qualifier_descriptor dev_qualifier = {
.bLength = sizeof dev_qualifier,
.bDescriptorType = USB_DT_DEVICE_QUALIFIER,
- .bcdUSB = __constant_cpu_to_le16 (0x0200),
+ .bcdUSB = __constant_cpu_to_le16(0x0200),
.bDeviceClass = USB_CLASS_VENDOR_SPEC,
.bNumConfigurations = 2,
};
-static const struct usb_descriptor_header *hs_source_sink_function [] = {
+static const struct usb_descriptor_header *hs_source_sink_function[] = {
(struct usb_descriptor_header *) &otg_descriptor,
(struct usb_descriptor_header *) &source_sink_intf,
(struct usb_descriptor_header *) &hs_source_desc,
@@ -330,7 +317,7 @@ static const struct usb_descriptor_header *hs_source_sink_function [] = {
NULL,
};
-static const struct usb_descriptor_header *hs_loopback_function [] = {
+static const struct usb_descriptor_header *hs_loopback_function[] = {
(struct usb_descriptor_header *) &otg_descriptor,
(struct usb_descriptor_header *) &loopback_intf,
(struct usb_descriptor_header *) &hs_source_desc,
@@ -355,7 +342,7 @@ static char serial[] = "0123456789.0123456789.0123456789";
/* static strings, in UTF-8 */
-static struct usb_string strings [] = {
+static struct usb_string strings[] = {
{ STRING_MANUFACTURER, manufacturer, },
{ STRING_PRODUCT, longname, },
{ STRING_SERIAL, serial, },
@@ -364,7 +351,7 @@ static struct usb_string strings [] = {
{ } /* end of list */
};
-static struct usb_gadget_strings stringtab = {
+static struct usb_gadget_strings stringtab = {
.language = 0x0409, /* en-us */
.strings = strings,
};
@@ -387,8 +374,7 @@ static struct usb_gadget_strings stringtab = {
* high bandwidth modes at high speed. (Maybe work like Intel's test
* device?)
*/
-static int
-config_buf (struct usb_gadget *gadget,
+static int config_buf(struct usb_gadget *gadget,
u8 *buf, u8 type, unsigned index)
{
int is_source_sink;
@@ -419,7 +405,7 @@ config_buf (struct usb_gadget *gadget,
if (!gadget_is_otg(gadget))
function++;
- len = usb_gadget_config_buf (is_source_sink
+ len = usb_gadget_config_buf(is_source_sink
? &source_sink_config
: &loopback_config,
buf, USB_BUFSIZ, function);
@@ -431,27 +417,26 @@ config_buf (struct usb_gadget *gadget,
/*-------------------------------------------------------------------------*/
-static struct usb_request *
-alloc_ep_req (struct usb_ep *ep, unsigned length)
+static struct usb_request *alloc_ep_req(struct usb_ep *ep, unsigned length)
{
struct usb_request *req;
- req = usb_ep_alloc_request (ep, GFP_ATOMIC);
+ req = usb_ep_alloc_request(ep, GFP_ATOMIC);
if (req) {
req->length = length;
req->buf = kmalloc(length, GFP_ATOMIC);
if (!req->buf) {
- usb_ep_free_request (ep, req);
+ usb_ep_free_request(ep, req);
req = NULL;
}
}
return req;
}
-static void free_ep_req (struct usb_ep *ep, struct usb_request *req)
+static void free_ep_req(struct usb_ep *ep, struct usb_request *req)
{
kfree(req->buf);
- usb_ep_free_request (ep, req);
+ usb_ep_free_request(ep, req);
}
/*-------------------------------------------------------------------------*/
@@ -472,7 +457,7 @@ static void free_ep_req (struct usb_ep *ep, struct usb_request *req)
/* optionally require specific source/sink data patterns */
static int
-check_read_data (
+check_read_data(
struct zero_dev *dev,
struct usb_ep *ep,
struct usb_request *req
@@ -498,8 +483,8 @@ check_read_data (
continue;
break;
}
- ERROR (dev, "bad OUT byte, buf [%d] = %d\n", i, *buf);
- usb_ep_set_halt (ep);
+ ERROR(dev, "bad OUT byte, buf[%d] = %d\n", i, *buf);
+ usb_ep_set_halt(ep);
return -EINVAL;
}
return 0;
@@ -512,7 +497,7 @@ static void reinit_write_data(struct usb_ep *ep, struct usb_request *req)
switch (pattern) {
case 0:
- memset (req->buf, 0, req->length);
+ memset(req->buf, 0, req->length);
break;
case 1:
for (i = 0; i < req->length; i++)
@@ -525,7 +510,7 @@ static void reinit_write_data(struct usb_ep *ep, struct usb_request *req)
* irq delay between end of one request and start of the next.
* that prevents using hardware dma queues.
*/
-static void source_sink_complete (struct usb_ep *ep, struct usb_request *req)
+static void source_sink_complete(struct usb_ep *ep, struct usb_request *req)
{
struct zero_dev *dev = ep->driver_data;
int status = req->status;
@@ -534,8 +519,8 @@ static void source_sink_complete (struct usb_ep *ep, struct usb_request *req)
case 0: /* normal completion? */
if (ep == dev->out_ep) {
- check_read_data (dev, ep, req);
- memset (req->buf, 0x55, req->length);
+ check_read_data(dev, ep, req);
+ memset(req->buf, 0x55, req->length);
} else
reinit_write_data(ep, req);
break;
@@ -544,11 +529,11 @@ static void source_sink_complete (struct usb_ep *ep, struct usb_request *req)
case -ECONNABORTED: /* hardware forced ep reset */
case -ECONNRESET: /* request dequeued */
case -ESHUTDOWN: /* disconnect from host */
- VDBG (dev, "%s gone (%d), %d/%d\n", ep->name, status,
+ VDBG(dev, "%s gone (%d), %d/%d\n", ep->name, status,
req->actual, req->length);
if (ep == dev->out_ep)
- check_read_data (dev, ep, req);
- free_ep_req (ep, req);
+ check_read_data(dev, ep, req);
+ free_ep_req(ep, req);
return;
case -EOVERFLOW: /* buffer overrun on read means that
@@ -557,18 +542,18 @@ static void source_sink_complete (struct usb_ep *ep, struct usb_request *req)
*/
default:
#if 1
- DBG (dev, "%s complete --> %d, %d/%d\n", ep->name,
+ DBG(dev, "%s complete --> %d, %d/%d\n", ep->name,
status, req->actual, req->length);
#endif
case -EREMOTEIO: /* short read */
break;
}
- status = usb_ep_queue (ep, req, GFP_ATOMIC);
+ status = usb_ep_queue(ep, req, GFP_ATOMIC);
if (status) {
- ERROR (dev, "kill %s: resubmit %d bytes --> %d\n",
+ ERROR(dev, "kill %s: resubmit %d bytes --> %d\n",
ep->name, req->length, status);
- usb_ep_set_halt (ep);
+ usb_ep_set_halt(ep);
/* FIXME recover later ... somehow */
}
}
@@ -578,24 +563,24 @@ static struct usb_request *source_sink_start_ep(struct usb_ep *ep)
struct usb_request *req;
int status;
- req = alloc_ep_req (ep, buflen);
+ req = alloc_ep_req(ep, buflen);
if (!req)
return NULL;
- memset (req->buf, 0, req->length);
+ memset(req->buf, 0, req->length);
req->complete = source_sink_complete;
- if (strcmp (ep->name, EP_IN_NAME) == 0)
+ if (strcmp(ep->name, EP_IN_NAME) == 0)
reinit_write_data(ep, req);
else
- memset (req->buf, 0x55, req->length);
+ memset(req->buf, 0x55, req->length);
status = usb_ep_queue(ep, req, GFP_ATOMIC);
if (status) {
struct zero_dev *dev = ep->driver_data;
- ERROR (dev, "start %s --> %d\n", ep->name, status);
- free_ep_req (ep, req);
+ ERROR(dev, "start %s --> %d\n", ep->name, status);
+ free_ep_req(ep, req);
req = NULL;
}
@@ -608,34 +593,34 @@ static int set_source_sink_config(struct zero_dev *dev)
struct usb_ep *ep;
struct usb_gadget *gadget = dev->gadget;
- gadget_for_each_ep (ep, gadget) {
+ gadget_for_each_ep(ep, gadget) {
const struct usb_endpoint_descriptor *d;
/* one endpoint writes (sources) zeroes in (to the host) */
- if (strcmp (ep->name, EP_IN_NAME) == 0) {
- d = ep_desc (gadget, &hs_source_desc, &fs_source_desc);
- result = usb_ep_enable (ep, d);
+ if (strcmp(ep->name, EP_IN_NAME) == 0) {
+ d = ep_desc(gadget, &hs_source_desc, &fs_source_desc);
+ result = usb_ep_enable(ep, d);
if (result == 0) {
ep->driver_data = dev;
if (source_sink_start_ep(ep) != NULL) {
dev->in_ep = ep;
continue;
}
- usb_ep_disable (ep);
+ usb_ep_disable(ep);
result = -EIO;
}
/* one endpoint reads (sinks) anything out (from the host) */
- } else if (strcmp (ep->name, EP_OUT_NAME) == 0) {
- d = ep_desc (gadget, &hs_sink_desc, &fs_sink_desc);
- result = usb_ep_enable (ep, d);
+ } else if (strcmp(ep->name, EP_OUT_NAME) == 0) {
+ d = ep_desc(gadget, &hs_sink_desc, &fs_sink_desc);
+ result = usb_ep_enable(ep, d);
if (result == 0) {
ep->driver_data = dev;
if (source_sink_start_ep(ep) != NULL) {
dev->out_ep = ep;
continue;
}
- usb_ep_disable (ep);
+ usb_ep_disable(ep);
result = -EIO;
}
@@ -644,11 +629,11 @@ static int set_source_sink_config(struct zero_dev *dev)
continue;
/* stop on error */
- ERROR (dev, "can't start %s, result %d\n", ep->name, result);
+ ERROR(dev, "can't start %s, result %d\n", ep->name, result);
break;
}
if (result == 0)
- DBG (dev, "buflen %d\n", buflen);
+ DBG(dev, "buflen %d\n", buflen);
/* caller is responsible for cleanup on error */
return result;
@@ -656,7 +641,7 @@ static int set_source_sink_config(struct zero_dev *dev)
/*-------------------------------------------------------------------------*/
-static void loopback_complete (struct usb_ep *ep, struct usb_request *req)
+static void loopback_complete(struct usb_ep *ep, struct usb_request *req)
{
struct zero_dev *dev = ep->driver_data;
int status = req->status;
@@ -668,19 +653,19 @@ static void loopback_complete (struct usb_ep *ep, struct usb_request *req)
/* loop this OUT packet back IN to the host */
req->zero = (req->actual < req->length);
req->length = req->actual;
- status = usb_ep_queue (dev->in_ep, req, GFP_ATOMIC);
+ status = usb_ep_queue(dev->in_ep, req, GFP_ATOMIC);
if (status == 0)
return;
/* "should never get here" */
- ERROR (dev, "can't loop %s to %s: %d\n",
+ ERROR(dev, "can't loop %s to %s: %d\n",
ep->name, dev->in_ep->name,
status);
}
/* queue the buffer for some later OUT packet */
req->length = buflen;
- status = usb_ep_queue (dev->out_ep, req, GFP_ATOMIC);
+ status = usb_ep_queue(dev->out_ep, req, GFP_ATOMIC);
if (status == 0)
return;
@@ -688,7 +673,7 @@ static void loopback_complete (struct usb_ep *ep, struct usb_request *req)
/* FALLTHROUGH */
default:
- ERROR (dev, "%s loop complete --> %d, %d/%d\n", ep->name,
+ ERROR(dev, "%s loop complete --> %d, %d/%d\n", ep->name,
status, req->actual, req->length);
/* FALLTHROUGH */
@@ -700,7 +685,7 @@ static void loopback_complete (struct usb_ep *ep, struct usb_request *req)
case -ECONNABORTED: /* hardware forced ep reset */
case -ECONNRESET: /* request dequeued */
case -ESHUTDOWN: /* disconnect from host */
- free_ep_req (ep, req);
+ free_ep_req(ep, req);
return;
}
}
@@ -711,13 +696,13 @@ static int set_loopback_config(struct zero_dev *dev)
struct usb_ep *ep;
struct usb_gadget *gadget = dev->gadget;
- gadget_for_each_ep (ep, gadget) {
+ gadget_for_each_ep(ep, gadget) {
const struct usb_endpoint_descriptor *d;
/* one endpoint writes data back IN to the host */
- if (strcmp (ep->name, EP_IN_NAME) == 0) {
- d = ep_desc (gadget, &hs_source_desc, &fs_source_desc);
- result = usb_ep_enable (ep, d);
+ if (strcmp(ep->name, EP_IN_NAME) == 0) {
+ d = ep_desc(gadget, &hs_source_desc, &fs_source_desc);
+ result = usb_ep_enable(ep, d);
if (result == 0) {
ep->driver_data = dev;
dev->in_ep = ep;
@@ -725,9 +710,9 @@ static int set_loopback_config(struct zero_dev *dev)
}
/* one endpoint just reads OUT packets */
- } else if (strcmp (ep->name, EP_OUT_NAME) == 0) {
- d = ep_desc (gadget, &hs_sink_desc, &fs_sink_desc);
- result = usb_ep_enable (ep, d);
+ } else if (strcmp(ep->name, EP_OUT_NAME) == 0) {
+ d = ep_desc(gadget, &hs_sink_desc, &fs_sink_desc);
+ result = usb_ep_enable(ep, d);
if (result == 0) {
ep->driver_data = dev;
dev->out_ep = ep;
@@ -739,7 +724,7 @@ static int set_loopback_config(struct zero_dev *dev)
continue;
/* stop on error */
- ERROR (dev, "can't enable %s, result %d\n", ep->name, result);
+ ERROR(dev, "can't enable %s, result %d\n", ep->name, result);
break;
}
@@ -753,19 +738,19 @@ static int set_loopback_config(struct zero_dev *dev)
ep = dev->out_ep;
for (i = 0; i < qlen && result == 0; i++) {
- req = alloc_ep_req (ep, buflen);
+ req = alloc_ep_req(ep, buflen);
if (req) {
req->complete = loopback_complete;
- result = usb_ep_queue (ep, req, GFP_ATOMIC);
+ result = usb_ep_queue(ep, req, GFP_ATOMIC);
if (result)
- DBG (dev, "%s queue req --> %d\n",
+ DBG(dev, "%s queue req --> %d\n",
ep->name, result);
} else
result = -ENOMEM;
}
}
if (result == 0)
- DBG (dev, "qlen %d, buflen %d\n", qlen, buflen);
+ DBG(dev, "qlen %d, buflen %d\n", qlen, buflen);
/* caller is responsible for cleanup on error */
return result;
@@ -773,26 +758,26 @@ static int set_loopback_config(struct zero_dev *dev)
/*-------------------------------------------------------------------------*/
-static void zero_reset_config (struct zero_dev *dev)
+static void zero_reset_config(struct zero_dev *dev)
{
if (dev->config == 0)
return;
- DBG (dev, "reset config\n");
+ DBG(dev, "reset config\n");
/* just disable endpoints, forcing completion of pending i/o.
* all our completion handlers free their requests in this case.
*/
if (dev->in_ep) {
- usb_ep_disable (dev->in_ep);
+ usb_ep_disable(dev->in_ep);
dev->in_ep = NULL;
}
if (dev->out_ep) {
- usb_ep_disable (dev->out_ep);
+ usb_ep_disable(dev->out_ep);
dev->out_ep = NULL;
}
dev->config = 0;
- del_timer (&dev->resume);
+ del_timer(&dev->resume);
}
/* change our operational config. this code must agree with the code
@@ -813,12 +798,12 @@ static int zero_set_config(struct zero_dev *dev, unsigned number)
if (number == dev->config)
return 0;
- if (gadget_is_sa1100 (gadget) && dev->config) {
+ if (gadget_is_sa1100(gadget) && dev->config) {
/* tx fifo is full, but we can't clear it...*/
ERROR(dev, "can't change configurations\n");
return -ESPIPE;
}
- zero_reset_config (dev);
+ zero_reset_config(dev);
switch (number) {
case CONFIG_SOURCE_SINK:
@@ -837,7 +822,7 @@ static int zero_set_config(struct zero_dev *dev, unsigned number)
if (!result && (!dev->in_ep || !dev->out_ep))
result = -ENODEV;
if (result)
- zero_reset_config (dev);
+ zero_reset_config(dev);
else {
char *speed;
@@ -849,7 +834,7 @@ static int zero_set_config(struct zero_dev *dev, unsigned number)
}
dev->config = number;
- INFO (dev, "%s speed config #%d: %s\n", speed, number,
+ INFO(dev, "%s speed config #%d: %s\n", speed, number,
(number == CONFIG_SOURCE_SINK)
? source_sink : loopback);
}
@@ -858,10 +843,10 @@ static int zero_set_config(struct zero_dev *dev, unsigned number)
/*-------------------------------------------------------------------------*/
-static void zero_setup_complete (struct usb_ep *ep, struct usb_request *req)
+static void zero_setup_complete(struct usb_ep *ep, struct usb_request *req)
{
if (req->status || req->actual != req->length)
- DBG ((struct zero_dev *) ep->driver_data,
+ DBG((struct zero_dev *) ep->driver_data,
"setup complete --> %d, %d/%d\n",
req->status, req->actual, req->length);
}
@@ -874,9 +859,9 @@ static void zero_setup_complete (struct usb_ep *ep, struct usb_request *req)
* the work is in config-specific setup.
*/
static int
-zero_setup (struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl)
+zero_setup(struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl)
{
- struct zero_dev *dev = get_gadget_data (gadget);
+ struct zero_dev *dev = get_gadget_data(gadget);
struct usb_request *req = dev->req;
int value = -EOPNOTSUPP;
u16 w_index = le16_to_cpu(ctrl->wIndex);
@@ -895,14 +880,14 @@ zero_setup (struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl)
switch (w_value >> 8) {
case USB_DT_DEVICE:
- value = min (w_length, (u16) sizeof device_desc);
- memcpy (req->buf, &device_desc, value);
+ value = min(w_length, (u16) sizeof device_desc);
+ memcpy(req->buf, &device_desc, value);
break;
case USB_DT_DEVICE_QUALIFIER:
if (!gadget_is_dualspeed(gadget))
break;
- value = min (w_length, (u16) sizeof dev_qualifier);
- memcpy (req->buf, &dev_qualifier, value);
+ value = min(w_length, (u16) sizeof dev_qualifier);
+ memcpy(req->buf, &dev_qualifier, value);
break;
case USB_DT_OTHER_SPEED_CONFIG:
@@ -910,11 +895,11 @@ zero_setup (struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl)
break;
// FALLTHROUGH
case USB_DT_CONFIG:
- value = config_buf (gadget, req->buf,
+ value = config_buf(gadget, req->buf,
w_value >> 8,
w_value & 0xff);
if (value >= 0)
- value = min (w_length, (u16) value);
+ value = min(w_length, (u16) value);
break;
case USB_DT_STRING:
@@ -923,10 +908,10 @@ zero_setup (struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl)
* add string tables for other languages, using
* any UTF-8 characters
*/
- value = usb_gadget_get_string (&stringtab,
+ value = usb_gadget_get_string(&stringtab,
w_value & 0xff, req->buf);
if (value >= 0)
- value = min (w_length, (u16) value);
+ value = min(w_length, (u16) value);
break;
}
break;
@@ -936,20 +921,20 @@ zero_setup (struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl)
if (ctrl->bRequestType != 0)
goto unknown;
if (gadget->a_hnp_support)
- DBG (dev, "HNP available\n");
+ DBG(dev, "HNP available\n");
else if (gadget->a_alt_hnp_support)
- DBG (dev, "HNP needs a different root port\n");
+ DBG(dev, "HNP needs a different root port\n");
else
- VDBG (dev, "HNP inactive\n");
- spin_lock (&dev->lock);
+ VDBG(dev, "HNP inactive\n");
+ spin_lock(&dev->lock);
value = zero_set_config(dev, w_value);
- spin_unlock (&dev->lock);
+ spin_unlock(&dev->lock);
break;
case USB_REQ_GET_CONFIGURATION:
if (ctrl->bRequestType != USB_DIR_IN)
goto unknown;
*(u8 *)req->buf = dev->config;
- value = min (w_length, (u16) 1);
+ value = min(w_length, (u16) 1);
break;
/* until we add altsetting support, or other interfaces,
@@ -959,7 +944,7 @@ zero_setup (struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl)
case USB_REQ_SET_INTERFACE:
if (ctrl->bRequestType != USB_RECIP_INTERFACE)
goto unknown;
- spin_lock (&dev->lock);
+ spin_lock(&dev->lock);
if (dev->config && w_index == 0 && w_value == 0) {
u8 config = dev->config;
@@ -970,11 +955,11 @@ zero_setup (struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl)
* if we had more than one interface we couldn't
* use this "reset the config" shortcut.
*/
- zero_reset_config (dev);
+ zero_reset_config(dev);
zero_set_config(dev, config);
value = 0;
}
- spin_unlock (&dev->lock);
+ spin_unlock(&dev->lock);
break;
case USB_REQ_GET_INTERFACE:
if (ctrl->bRequestType != (USB_DIR_IN|USB_RECIP_INTERFACE))
@@ -986,7 +971,7 @@ zero_setup (struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl)
break;
}
*(u8 *)req->buf = 0;
- value = min (w_length, (u16) 1);
+ value = min(w_length, (u16) 1);
break;
/*
@@ -1018,7 +1003,7 @@ zero_setup (struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl)
default:
unknown:
- VDBG (dev,
+ VDBG(dev,
"unknown control req%02x.%02x v%04x i%04x l%d\n",
ctrl->bRequestType, ctrl->bRequest,
w_value, w_index, w_length);
@@ -1028,11 +1013,11 @@ unknown:
if (value >= 0) {
req->length = value;
req->zero = value < w_length;
- value = usb_ep_queue (gadget->ep0, req, GFP_ATOMIC);
+ value = usb_ep_queue(gadget->ep0, req, GFP_ATOMIC);
if (value < 0) {
- DBG (dev, "ep_queue --> %d\n", value);
+ DBG(dev, "ep_queue --> %d\n", value);
req->status = 0;
- zero_setup_complete (gadget->ep0, req);
+ zero_setup_complete(gadget->ep0, req);
}
}
@@ -1040,28 +1025,26 @@ unknown:
return value;
}
-static void
-zero_disconnect (struct usb_gadget *gadget)
+static void zero_disconnect(struct usb_gadget *gadget)
{
- struct zero_dev *dev = get_gadget_data (gadget);
+ struct zero_dev *dev = get_gadget_data(gadget);
unsigned long flags;
- spin_lock_irqsave (&dev->lock, flags);
- zero_reset_config (dev);
+ spin_lock_irqsave(&dev->lock, flags);
+ zero_reset_config(dev);
/* a more significant application might have some non-usb
* activities to quiesce here, saving resources like power
* or pushing the notification up a network stack.
*/
- spin_unlock_irqrestore (&dev->lock, flags);
+ spin_unlock_irqrestore(&dev->lock, flags);
/* next we may get setup() calls to enumerate new connections;
* or an unbind() during shutdown (including removing module).
*/
}
-static void
-zero_autoresume (unsigned long _dev)
+static void zero_autoresume(unsigned long _dev)
{
struct zero_dev *dev = (struct zero_dev *) _dev;
int status;
@@ -1070,32 +1053,30 @@ zero_autoresume (unsigned long _dev)
* more significant than just a timer firing...
*/
if (dev->gadget->speed != USB_SPEED_UNKNOWN) {
- status = usb_gadget_wakeup (dev->gadget);
- DBG (dev, "wakeup --> %d\n", status);
+ status = usb_gadget_wakeup(dev->gadget);
+ DBG(dev, "wakeup --> %d\n", status);
}
}
/*-------------------------------------------------------------------------*/
-static void /* __init_or_exit */
-zero_unbind (struct usb_gadget *gadget)
+static void zero_unbind(struct usb_gadget *gadget)
{
- struct zero_dev *dev = get_gadget_data (gadget);
+ struct zero_dev *dev = get_gadget_data(gadget);
- DBG (dev, "unbind\n");
+ DBG(dev, "unbind\n");
/* we've already been disconnected ... no i/o is active */
if (dev->req) {
dev->req->length = USB_BUFSIZ;
- free_ep_req (gadget->ep0, dev->req);
+ free_ep_req(gadget->ep0, dev->req);
}
- del_timer_sync (&dev->resume);
- kfree (dev);
- set_gadget_data (gadget, NULL);
+ del_timer_sync(&dev->resume);
+ kfree(dev);
+ set_gadget_data(gadget, NULL);
}
-static int __init
-zero_bind (struct usb_gadget *gadget)
+static int __init zero_bind(struct usb_gadget *gadget)
{
struct zero_dev *dev;
struct usb_ep *ep;
@@ -1111,8 +1092,8 @@ zero_bind (struct usb_gadget *gadget)
* autoconfigure on any sane usb controller driver,
* but there may also be important quirks to address.
*/
- usb_ep_autoconfig_reset (gadget);
- ep = usb_ep_autoconfig (gadget, &fs_source_desc);
+ usb_ep_autoconfig_reset(gadget);
+ ep = usb_ep_autoconfig(gadget, &fs_source_desc);
if (!ep) {
autoconf_fail:
pr_err("%s: can't autoconfigure on %s\n",
@@ -1122,15 +1103,15 @@ autoconf_fail:
EP_IN_NAME = ep->name;
ep->driver_data = ep; /* claim */
- ep = usb_ep_autoconfig (gadget, &fs_sink_desc);
+ ep = usb_ep_autoconfig(gadget, &fs_sink_desc);
if (!ep)
goto autoconf_fail;
EP_OUT_NAME = ep->name;
ep->driver_data = ep; /* claim */
- gcnum = usb_gadget_controller_number (gadget);
+ gcnum = usb_gadget_controller_number(gadget);
if (gcnum >= 0)
- device_desc.bcdDevice = cpu_to_le16 (0x0200 + gcnum);
+ device_desc.bcdDevice = cpu_to_le16(0x0200 + gcnum);
else {
/* gadget zero is so simple (for now, no altsettings) that
* it SHOULD NOT have problems with bulk-capable hardware.
@@ -1141,7 +1122,7 @@ autoconf_fail:
*/
pr_warning("%s: controller '%s' not recognized\n",
shortname, gadget->name);
- device_desc.bcdDevice = __constant_cpu_to_le16 (0x9999);
+ device_desc.bcdDevice = __constant_cpu_to_le16(0x9999);
}
@@ -1149,12 +1130,16 @@ autoconf_fail:
dev = kzalloc(sizeof(*dev), GFP_KERNEL);
if (!dev)
return -ENOMEM;
- spin_lock_init (&dev->lock);
+ spin_lock_init(&dev->lock);
dev->gadget = gadget;
- set_gadget_data (gadget, dev);
+ set_gadget_data(gadget, dev);
+
+ init_timer(&dev->resume);
+ dev->resume.function = zero_autoresume;
+ dev->resume.data = (unsigned long) dev;
/* preallocate control response and buffer */
- dev->req = usb_ep_alloc_request (gadget->ep0, GFP_KERNEL);
+ dev->req = usb_ep_alloc_request(gadget->ep0, GFP_KERNEL);
if (!dev->req)
goto enomem;
dev->req->buf = kmalloc(USB_BUFSIZ, GFP_KERNEL);
@@ -1182,11 +1167,8 @@ autoconf_fail:
loopback_config.bmAttributes |= USB_CONFIG_ATT_WAKEUP;
}
- usb_gadget_set_selfpowered (gadget);
+ usb_gadget_set_selfpowered(gadget);
- init_timer (&dev->resume);
- dev->resume.function = zero_autoresume;
- dev->resume.data = (unsigned long) dev;
if (autoresume) {
source_sink_config.bmAttributes |= USB_CONFIG_ATT_WAKEUP;
loopback_config.bmAttributes |= USB_CONFIG_ATT_WAKEUP;
@@ -1194,45 +1176,43 @@ autoconf_fail:
gadget->ep0->driver_data = dev;
- INFO (dev, "%s, version: " DRIVER_VERSION "\n", longname);
- INFO (dev, "using %s, OUT %s IN %s\n", gadget->name,
+ INFO(dev, "%s, version: " DRIVER_VERSION "\n", longname);
+ INFO(dev, "using %s, OUT %s IN %s\n", gadget->name,
EP_OUT_NAME, EP_IN_NAME);
- snprintf (manufacturer, sizeof manufacturer, "%s %s with %s",
+ snprintf(manufacturer, sizeof manufacturer, "%s %s with %s",
init_utsname()->sysname, init_utsname()->release,
gadget->name);
return 0;
enomem:
- zero_unbind (gadget);
+ zero_unbind(gadget);
return -ENOMEM;
}
/*-------------------------------------------------------------------------*/
-static void
-zero_suspend (struct usb_gadget *gadget)
+static void zero_suspend(struct usb_gadget *gadget)
{
- struct zero_dev *dev = get_gadget_data (gadget);
+ struct zero_dev *dev = get_gadget_data(gadget);
if (gadget->speed == USB_SPEED_UNKNOWN)
return;
if (autoresume) {
- mod_timer (&dev->resume, jiffies + (HZ * autoresume));
- DBG (dev, "suspend, wakeup in %d seconds\n", autoresume);
+ mod_timer(&dev->resume, jiffies + (HZ * autoresume));
+ DBG(dev, "suspend, wakeup in %d seconds\n", autoresume);
} else
- DBG (dev, "suspend\n");
+ DBG(dev, "suspend\n");
}
-static void
-zero_resume (struct usb_gadget *gadget)
+static void zero_resume(struct usb_gadget *gadget)
{
- struct zero_dev *dev = get_gadget_data (gadget);
+ struct zero_dev *dev = get_gadget_data(gadget);
- DBG (dev, "resume\n");
- del_timer (&dev->resume);
+ DBG(dev, "resume\n");
+ del_timer(&dev->resume);
}
@@ -1264,15 +1244,15 @@ MODULE_AUTHOR("David Brownell");
MODULE_LICENSE("GPL");
-static int __init init (void)
+static int __init init(void)
{
- return usb_gadget_register_driver (&zero_driver);
+ return usb_gadget_register_driver(&zero_driver);
}
-module_init (init);
+module_init(init);
-static void __exit cleanup (void)
+static void __exit cleanup(void)
{
- usb_gadget_unregister_driver (&zero_driver);
+ usb_gadget_unregister_driver(&zero_driver);
}
-module_exit (cleanup);
+module_exit(cleanup);
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index 0b87480dd713..33b467a8352d 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -4,6 +4,19 @@
comment "USB Host Controller Drivers"
depends on USB
+config USB_C67X00_HCD
+ tristate "Cypress C67x00 HCD support"
+ depends on USB
+ help
+ The Cypress C67x00 (EZ-Host/EZ-OTG) chips are dual-role
+ host/peripheral/OTG USB controllers.
+
+ Enable this option to support this chip in host controller mode.
+ If unsure, say N.
+
+ To compile this driver as a module, choose M here: the
+ module will be called c67x00.
+
config USB_EHCI_HCD
tristate "EHCI HCD (USB 2.0) support"
depends on USB && USB_ARCH_HAS_EHCI
@@ -95,6 +108,32 @@ config USB_ISP116X_HCD
To compile this driver as a module, choose M here: the
module will be called isp116x-hcd.
+config USB_ISP1760_HCD
+ tristate "ISP 1760 HCD support"
+ depends on USB && EXPERIMENTAL
+ ---help---
+ The ISP1760 chip is a USB 2.0 host controller.
+
+ This driver does not support isochronous transfers or OTG.
+
+ To compile this driver as a module, choose M here: the
+ module will be called isp1760-hcd.
+
+config USB_ISP1760_PCI
+ bool "Support for the PCI bus"
+ depends on USB_ISP1760_HCD && PCI
+ ---help---
+ Enables support for the device present on the PCI bus.
+ This should only be required if you happen to have the eval kit from
+ NXP and you are going to test it.
+
+config USB_ISP1760_OF
+ bool "Support for the OF platform bus"
+ depends on USB_ISP1760_HCD && OF
+ ---help---
+ Enables support for the device present on the PowerPC
+ OpenFirmware platform bus.
+
config USB_OHCI_HCD
tristate "OHCI HCD support"
depends on USB && USB_ARCH_HAS_OHCI
diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile
index bb8e9d44f371..f1edda2dcfde 100644
--- a/drivers/usb/host/Makefile
+++ b/drivers/usb/host/Makefile
@@ -6,6 +6,8 @@ ifeq ($(CONFIG_USB_DEBUG),y)
EXTRA_CFLAGS += -DDEBUG
endif
+isp1760-objs := isp1760-hcd.o isp1760-if.o
+
obj-$(CONFIG_PCI) += pci-quirks.o
obj-$(CONFIG_USB_EHCI_HCD) += ehci-hcd.o
@@ -16,4 +18,4 @@ obj-$(CONFIG_USB_SL811_HCD) += sl811-hcd.o
obj-$(CONFIG_USB_SL811_CS) += sl811_cs.o
obj-$(CONFIG_USB_U132_HCD) += u132-hcd.o
obj-$(CONFIG_USB_R8A66597_HCD) += r8a66597-hcd.o
-
+obj-$(CONFIG_USB_ISP1760_HCD) += isp1760.o
diff --git a/drivers/usb/host/isp1760-hcd.c b/drivers/usb/host/isp1760-hcd.c
new file mode 100644
index 000000000000..4ba96c1e060c
--- /dev/null
+++ b/drivers/usb/host/isp1760-hcd.c
@@ -0,0 +1,2231 @@
+/*
+ * Driver for the NXP ISP1760 chip
+ *
+ * However, the code might contain some bugs. What doesn't work for sure is:
+ * - ISO
+ * - OTG
+ e The interrupt line is configured as active low, level.
+ *
+ * (c) 2007 Sebastian Siewior <bigeasy@linutronix.de>
+ *
+ */
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/list.h>
+#include <linux/usb.h>
+#include <linux/debugfs.h>
+#include <linux/uaccess.h>
+#include <linux/io.h>
+#include <asm/unaligned.h>
+
+#include "../core/hcd.h"
+#include "isp1760-hcd.h"
+
+static struct kmem_cache *qtd_cachep;
+static struct kmem_cache *qh_cachep;
+
+struct isp1760_hcd {
+ u32 hcs_params;
+ spinlock_t lock;
+ struct inter_packet_info atl_ints[32];
+ struct inter_packet_info int_ints[32];
+ struct memory_chunk memory_pool[BLOCKS];
+
+ /* periodic schedule support */
+#define DEFAULT_I_TDPS 1024
+ unsigned periodic_size;
+ unsigned i_thresh;
+ unsigned long reset_done;
+ unsigned long next_statechange;
+};
+
+static inline struct isp1760_hcd *hcd_to_priv(struct usb_hcd *hcd)
+{
+ return (struct isp1760_hcd *) (hcd->hcd_priv);
+}
+static inline struct usb_hcd *priv_to_hcd(struct isp1760_hcd *priv)
+{
+ return container_of((void *) priv, struct usb_hcd, hcd_priv);
+}
+
+/* Section 2.2 Host Controller Capability Registers */
+#define HC_LENGTH(p) (((p)>>00)&0x00ff) /* bits 7:0 */
+#define HC_VERSION(p) (((p)>>16)&0xffff) /* bits 31:16 */
+#define HCS_INDICATOR(p) ((p)&(1 << 16)) /* true: has port indicators */
+#define HCS_PPC(p) ((p)&(1 << 4)) /* true: port power control */
+#define HCS_N_PORTS(p) (((p)>>0)&0xf) /* bits 3:0, ports on HC */
+#define HCC_ISOC_CACHE(p) ((p)&(1 << 7)) /* true: can cache isoc frame */
+#define HCC_ISOC_THRES(p) (((p)>>4)&0x7) /* bits 6:4, uframes cached */
+
+/* Section 2.3 Host Controller Operational Registers */
+#define CMD_LRESET (1<<7) /* partial reset (no ports, etc) */
+#define CMD_RESET (1<<1) /* reset HC not bus */
+#define CMD_RUN (1<<0) /* start/stop HC */
+#define STS_PCD (1<<2) /* port change detect */
+#define FLAG_CF (1<<0) /* true: we'll support "high speed" */
+
+#define PORT_OWNER (1<<13) /* true: companion hc owns this port */
+#define PORT_POWER (1<<12) /* true: has power (see PPC) */
+#define PORT_USB11(x) (((x) & (3 << 10)) == (1 << 10)) /* USB 1.1 device */
+#define PORT_RESET (1<<8) /* reset port */
+#define PORT_SUSPEND (1<<7) /* suspend port */
+#define PORT_RESUME (1<<6) /* resume it */
+#define PORT_PE (1<<2) /* port enable */
+#define PORT_CSC (1<<1) /* connect status change */
+#define PORT_CONNECT (1<<0) /* device connected */
+#define PORT_RWC_BITS (PORT_CSC)
+
+struct isp1760_qtd {
+ struct isp1760_qtd *hw_next;
+ u8 packet_type;
+ u8 toggle;
+
+ void *data_buffer;
+ /* the rest is HCD-private */
+ struct list_head qtd_list;
+ struct urb *urb;
+ size_t length;
+
+ /* isp special*/
+ u32 status;
+#define URB_COMPLETE_NOTIFY (1 << 0)
+#define URB_ENQUEUED (1 << 1)
+#define URB_TYPE_ATL (1 << 2)
+#define URB_TYPE_INT (1 << 3)
+};
+
+struct isp1760_qh {
+ /* first part defined by EHCI spec */
+ struct list_head qtd_list;
+ struct isp1760_hcd *priv;
+
+ /* periodic schedule info */
+ unsigned short period; /* polling interval */
+ struct usb_device *dev;
+
+ u32 toggle;
+ u32 ping;
+};
+
+#define ehci_port_speed(priv, portsc) (1 << USB_PORT_FEAT_HIGHSPEED)
+
+static unsigned int isp1760_readl(__u32 __iomem *regs)
+{
+ return readl(regs);
+}
+
+static void isp1760_writel(const unsigned int val, __u32 __iomem *regs)
+{
+ writel(val, regs);
+}
+
+/*
+ * The next two copy via MMIO data to/from the device. memcpy_{to|from}io()
+ * doesn't quite work because some people have to enforce 32-bit access
+ */
+static void priv_read_copy(struct isp1760_hcd *priv, u32 *src,
+ __u32 __iomem *dst, u32 offset, u32 len)
+{
+ struct usb_hcd *hcd = priv_to_hcd(priv);
+ u32 val;
+ u8 *buff8;
+
+ if (!src) {
+ printk(KERN_ERR "ERROR: buffer: %p len: %d\n", src, len);
+ return;
+ }
+ isp1760_writel(offset, hcd->regs + HC_MEMORY_REG);
+ /* XXX
+ * 90nsec delay, the spec says something how this could be avoided.
+ */
+ mdelay(1);
+
+ while (len >= 4) {
+ *src = __raw_readl(dst);
+ len -= 4;
+ src++;
+ dst++;
+ }
+
+ if (!len)
+ return;
+
+ /* in case we have 3, 2 or 1 by left. The dst buffer may not be fully
+ * allocated.
+ */
+ val = isp1760_readl(dst);
+
+ buff8 = (u8 *)src;
+ while (len) {
+
+ *buff8 = val;
+ val >>= 8;
+ len--;
+ buff8++;
+ }
+}
+
+static void priv_write_copy(const struct isp1760_hcd *priv, const u32 *src,
+ __u32 __iomem *dst, u32 len)
+{
+ while (len >= 4) {
+ __raw_writel(*src, dst);
+ len -= 4;
+ src++;
+ dst++;
+ }
+
+ if (!len)
+ return;
+ /* in case we have 3, 2 or 1 by left. The buffer is allocated and the
+ * extra bytes should not be read by the HW
+ */
+
+ __raw_writel(*src, dst);
+}
+
+/* memory management of the 60kb on the chip from 0x1000 to 0xffff */
+static void init_memory(struct isp1760_hcd *priv)
+{
+ int i;
+ u32 payload;
+
+ payload = 0x1000;
+ for (i = 0; i < BLOCK_1_NUM; i++) {
+ priv->memory_pool[i].start = payload;
+ priv->memory_pool[i].size = BLOCK_1_SIZE;
+ priv->memory_pool[i].free = 1;
+ payload += priv->memory_pool[i].size;
+ }
+
+
+ for (i = BLOCK_1_NUM; i < BLOCK_1_NUM + BLOCK_2_NUM; i++) {
+ priv->memory_pool[i].start = payload;
+ priv->memory_pool[i].size = BLOCK_2_SIZE;
+ priv->memory_pool[i].free = 1;
+ payload += priv->memory_pool[i].size;
+ }
+
+
+ for (i = BLOCK_1_NUM + BLOCK_2_NUM; i < BLOCKS; i++) {
+ priv->memory_pool[i].start = payload;
+ priv->memory_pool[i].size = BLOCK_3_SIZE;
+ priv->memory_pool[i].free = 1;
+ payload += priv->memory_pool[i].size;
+ }
+
+ BUG_ON(payload - priv->memory_pool[i - 1].size > PAYLOAD_SIZE);
+}
+
+static u32 alloc_mem(struct isp1760_hcd *priv, u32 size)
+{
+ int i;
+
+ if (!size)
+ return ISP1760_NULL_POINTER;
+
+ for (i = 0; i < BLOCKS; i++) {
+ if (priv->memory_pool[i].size >= size &&
+ priv->memory_pool[i].free) {
+
+ priv->memory_pool[i].free = 0;
+ return priv->memory_pool[i].start;
+ }
+ }
+
+ printk(KERN_ERR "ISP1760 MEM: can not allocate %d bytes of memory\n",
+ size);
+ printk(KERN_ERR "Current memory map:\n");
+ for (i = 0; i < BLOCKS; i++) {
+ printk(KERN_ERR "Pool %2d size %4d status: %d\n",
+ i, priv->memory_pool[i].size,
+ priv->memory_pool[i].free);
+ }
+ /* XXX maybe -ENOMEM could be possible */
+ BUG();
+ return 0;
+}
+
+static void free_mem(struct isp1760_hcd *priv, u32 mem)
+{
+ int i;
+
+ if (mem == ISP1760_NULL_POINTER)
+ return;
+
+ for (i = 0; i < BLOCKS; i++) {
+ if (priv->memory_pool[i].start == mem) {
+
+ BUG_ON(priv->memory_pool[i].free);
+
+ priv->memory_pool[i].free = 1;
+ return ;
+ }
+ }
+
+ printk(KERN_ERR "Trying to free not-here-allocated memory :%08x\n",
+ mem);
+ BUG();
+}
+
+static void isp1760_init_regs(struct usb_hcd *hcd)
+{
+ isp1760_writel(0, hcd->regs + HC_BUFFER_STATUS_REG);
+ isp1760_writel(NO_TRANSFER_ACTIVE, hcd->regs +
+ HC_ATL_PTD_SKIPMAP_REG);
+ isp1760_writel(NO_TRANSFER_ACTIVE, hcd->regs +
+ HC_INT_PTD_SKIPMAP_REG);
+ isp1760_writel(NO_TRANSFER_ACTIVE, hcd->regs +
+ HC_ISO_PTD_SKIPMAP_REG);
+
+ isp1760_writel(~NO_TRANSFER_ACTIVE, hcd->regs +
+ HC_ATL_PTD_DONEMAP_REG);
+ isp1760_writel(~NO_TRANSFER_ACTIVE, hcd->regs +
+ HC_INT_PTD_DONEMAP_REG);
+ isp1760_writel(~NO_TRANSFER_ACTIVE, hcd->regs +
+ HC_ISO_PTD_DONEMAP_REG);
+}
+
+static int handshake(struct isp1760_hcd *priv, void __iomem *ptr,
+ u32 mask, u32 done, int usec)
+{
+ u32 result;
+
+ do {
+ result = isp1760_readl(ptr);
+ if (result == ~0)
+ return -ENODEV;
+ result &= mask;
+ if (result == done)
+ return 0;
+ udelay(1);
+ usec--;
+ } while (usec > 0);
+ return -ETIMEDOUT;
+}
+
+/* reset a non-running (STS_HALT == 1) controller */
+static int ehci_reset(struct isp1760_hcd *priv)
+{
+ int retval;
+ struct usb_hcd *hcd = priv_to_hcd(priv);
+ u32 command = isp1760_readl(hcd->regs + HC_USBCMD);
+
+ command |= CMD_RESET;
+ isp1760_writel(command, hcd->regs + HC_USBCMD);
+ hcd->state = HC_STATE_HALT;
+ priv->next_statechange = jiffies;
+ retval = handshake(priv, hcd->regs + HC_USBCMD,
+ CMD_RESET, 0, 250 * 1000);
+ return retval;
+}
+
+static void qh_destroy(struct isp1760_qh *qh)
+{
+ BUG_ON(!list_empty(&qh->qtd_list));
+ kmem_cache_free(qh_cachep, qh);
+}
+
+static struct isp1760_qh *isp1760_qh_alloc(struct isp1760_hcd *priv,
+ gfp_t flags)
+{
+ struct isp1760_qh *qh;
+
+ qh = kmem_cache_zalloc(qh_cachep, flags);
+ if (!qh)
+ return qh;
+
+ INIT_LIST_HEAD(&qh->qtd_list);
+ qh->priv = priv;
+ return qh;
+}
+
+/* magic numbers that can affect system performance */
+#define EHCI_TUNE_CERR 3 /* 0-3 qtd retries; 0 == don't stop */
+#define EHCI_TUNE_RL_HS 4 /* nak throttle; see 4.9 */
+#define EHCI_TUNE_RL_TT 0
+#define EHCI_TUNE_MULT_HS 1 /* 1-3 transactions/uframe; 4.10.3 */
+#define EHCI_TUNE_MULT_TT 1
+#define EHCI_TUNE_FLS 2 /* (small) 256 frame schedule */
+
+/* one-time init, only for memory state */
+static int priv_init(struct usb_hcd *hcd)
+{
+ struct isp1760_hcd *priv = hcd_to_priv(hcd);
+ u32 hcc_params;
+
+ spin_lock_init(&priv->lock);
+
+ /*
+ * hw default: 1K periodic list heads, one per frame.
+ * periodic_size can shrink by USBCMD update if hcc_params allows.
+ */
+ priv->periodic_size = DEFAULT_I_TDPS;
+
+ /* controllers may cache some of the periodic schedule ... */
+ hcc_params = isp1760_readl(hcd->regs + HC_HCCPARAMS);
+ /* full frame cache */
+ if (HCC_ISOC_CACHE(hcc_params))
+ priv->i_thresh = 8;
+ else /* N microframes cached */
+ priv->i_thresh = 2 + HCC_ISOC_THRES(hcc_params);
+
+ return 0;
+}
+
+static int isp1760_hc_setup(struct usb_hcd *hcd)
+{
+ struct isp1760_hcd *priv = hcd_to_priv(hcd);
+ int result;
+ u32 scratch;
+
+ isp1760_writel(0xdeadbabe, hcd->regs + HC_SCRATCH_REG);
+ scratch = isp1760_readl(hcd->regs + HC_SCRATCH_REG);
+ if (scratch != 0xdeadbabe) {
+ printk(KERN_ERR "ISP1760: Scratch test failed.\n");
+ return -ENODEV;
+ }
+
+ /* pre reset */
+ isp1760_init_regs(hcd);
+
+ /* reset */
+ isp1760_writel(SW_RESET_RESET_ALL, hcd->regs + HC_RESET_REG);
+ mdelay(100);
+
+ isp1760_writel(SW_RESET_RESET_HC, hcd->regs + HC_RESET_REG);
+ mdelay(100);
+
+ result = ehci_reset(priv);
+ if (result)
+ return result;
+
+ /* Step 11 passed */
+
+ isp1760_writel(INTERRUPT_ENABLE_MASK, hcd->regs + HC_INTERRUPT_REG);
+ isp1760_writel(INTERRUPT_ENABLE_MASK, hcd->regs + HC_INTERRUPT_ENABLE);
+
+ /* ATL reset */
+ scratch = isp1760_readl(hcd->regs + HC_HW_MODE_CTRL);
+ isp1760_writel(scratch | ALL_ATX_RESET, hcd->regs + HC_HW_MODE_CTRL);
+ mdelay(10);
+ isp1760_writel(scratch, hcd->regs + HC_HW_MODE_CTRL);
+
+ isp1760_writel(PORT1_POWER | PORT1_INIT2, hcd->regs + HC_PORT1_CTRL);
+ mdelay(10);
+
+ priv->hcs_params = isp1760_readl(hcd->regs + HC_HCSPARAMS);
+
+ return priv_init(hcd);
+}
+
+static void isp1760_init_maps(struct usb_hcd *hcd)
+{
+ /*set last maps, for iso its only 1, else 32 tds bitmap*/
+ isp1760_writel(0x80000000, hcd->regs + HC_ATL_PTD_LASTPTD_REG);
+ isp1760_writel(0x80000000, hcd->regs + HC_INT_PTD_LASTPTD_REG);
+ isp1760_writel(0x00000001, hcd->regs + HC_ISO_PTD_LASTPTD_REG);
+}
+
+static void isp1760_enable_interrupts(struct usb_hcd *hcd)
+{
+ isp1760_writel(0, hcd->regs + HC_ATL_IRQ_MASK_AND_REG);
+ isp1760_writel(0, hcd->regs + HC_ATL_IRQ_MASK_OR_REG);
+ isp1760_writel(0, hcd->regs + HC_INT_IRQ_MASK_AND_REG);
+ isp1760_writel(0, hcd->regs + HC_INT_IRQ_MASK_OR_REG);
+ isp1760_writel(0, hcd->regs + HC_ISO_IRQ_MASK_AND_REG);
+ isp1760_writel(0xffffffff, hcd->regs + HC_ISO_IRQ_MASK_OR_REG);
+ /* step 23 passed */
+}
+
+static int isp1760_run(struct usb_hcd *hcd)
+{
+ struct isp1760_hcd *priv = hcd_to_priv(hcd);
+ int retval;
+ u32 temp;
+ u32 command;
+ u32 chipid;
+
+ hcd->uses_new_polling = 1;
+ hcd->poll_rh = 0;
+
+ hcd->state = HC_STATE_RUNNING;
+ isp1760_enable_interrupts(hcd);
+ temp = isp1760_readl(hcd->regs + HC_HW_MODE_CTRL);
+ temp |= FINAL_HW_CONFIG;
+ isp1760_writel(temp, hcd->regs + HC_HW_MODE_CTRL);
+
+ command = isp1760_readl(hcd->regs + HC_USBCMD);
+ command &= ~(CMD_LRESET|CMD_RESET);
+ command |= CMD_RUN;
+ isp1760_writel(command, hcd->regs + HC_USBCMD);
+
+ retval = handshake(priv, hcd->regs + HC_USBCMD, CMD_RUN, CMD_RUN,
+ 250 * 1000);
+ if (retval)
+ return retval;
+
+ /*
+ * XXX
+ * Spec says to write FLAG_CF as last config action, priv code grabs
+ * the semaphore while doing so.
+ */
+ down_write(&ehci_cf_port_reset_rwsem);
+ isp1760_writel(FLAG_CF, hcd->regs + HC_CONFIGFLAG);
+
+ retval = handshake(priv, hcd->regs + HC_CONFIGFLAG, FLAG_CF, FLAG_CF,
+ 250 * 1000);
+ up_write(&ehci_cf_port_reset_rwsem);
+ if (retval)
+ return retval;
+
+ chipid = isp1760_readl(hcd->regs + HC_CHIP_ID_REG);
+ isp1760_info(priv, "USB ISP %04x HW rev. %d started\n", chipid & 0xffff,
+ chipid >> 16);
+
+ /* PTD Register Init Part 2, Step 28 */
+ /* enable INTs */
+ isp1760_init_maps(hcd);
+
+ /* GRR this is run-once init(), being done every time the HC starts.
+ * So long as they're part of class devices, we can't do it init()
+ * since the class device isn't created that early.
+ */
+ return 0;
+}
+
+static u32 base_to_chip(u32 base)
+{
+ return ((base - 0x400) >> 3);
+}
+
+static void transform_into_atl(struct isp1760_hcd *priv, struct isp1760_qh *qh,
+ struct isp1760_qtd *qtd, struct urb *urb,
+ u32 payload, struct ptd *ptd)
+{
+ u32 dw0;
+ u32 dw1;
+ u32 dw2;
+ u32 dw3;
+ u32 maxpacket;
+ u32 multi;
+ u32 pid_code;
+ u32 rl = RL_COUNTER;
+ u32 nak = NAK_COUNTER;
+
+ /* according to 3.6.2, max packet len can not be > 0x400 */
+ maxpacket = usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe));
+ multi = 1 + ((maxpacket >> 11) & 0x3);
+ maxpacket &= 0x7ff;
+
+ /* DW0 */
+ dw0 = PTD_VALID;
+ dw0 |= PTD_LENGTH(qtd->length);
+ dw0 |= PTD_MAXPACKET(maxpacket);
+ dw0 |= PTD_ENDPOINT(usb_pipeendpoint(urb->pipe));
+ dw1 = usb_pipeendpoint(urb->pipe) >> 1;
+
+ /* DW1 */
+ dw1 |= PTD_DEVICE_ADDR(usb_pipedevice(urb->pipe));
+
+ pid_code = qtd->packet_type;
+ dw1 |= PTD_PID_TOKEN(pid_code);
+
+ if (usb_pipebulk(urb->pipe))
+ dw1 |= PTD_TRANS_BULK;
+ else if (usb_pipeint(urb->pipe))
+ dw1 |= PTD_TRANS_INT;
+
+ if (urb->dev->speed != USB_SPEED_HIGH) {
+ /* split transaction */
+
+ dw1 |= PTD_TRANS_SPLIT;
+ if (urb->dev->speed == USB_SPEED_LOW)
+ dw1 |= PTD_SE_USB_LOSPEED;
+
+ dw1 |= PTD_PORT_NUM(urb->dev->ttport);
+ dw1 |= PTD_HUB_NUM(urb->dev->tt->hub->devnum);
+
+ /* SE bit for Split INT transfers */
+ if (usb_pipeint(urb->pipe) &&
+ (urb->dev->speed == USB_SPEED_LOW))
+ dw1 |= 2 << 16;
+
+ dw3 = 0;
+ rl = 0;
+ nak = 0;
+ } else {
+ dw0 |= PTD_MULTI(multi);
+ if (usb_pipecontrol(urb->pipe) || usb_pipebulk(urb->pipe))
+ dw3 = qh->ping;
+ else
+ dw3 = 0;
+ }
+ /* DW2 */
+ dw2 = 0;
+ dw2 |= PTD_DATA_START_ADDR(base_to_chip(payload));
+ dw2 |= PTD_RL_CNT(rl);
+ dw3 |= PTD_NAC_CNT(nak);
+
+ /* DW3 */
+ if (usb_pipecontrol(urb->pipe))
+ dw3 |= PTD_DATA_TOGGLE(qtd->toggle);
+ else
+ dw3 |= qh->toggle;
+
+
+ dw3 |= PTD_ACTIVE;
+ /* Cerr */
+ dw3 |= PTD_CERR(ERR_COUNTER);
+
+ memset(ptd, 0, sizeof(*ptd));
+
+ ptd->dw0 = cpu_to_le32(dw0);
+ ptd->dw1 = cpu_to_le32(dw1);
+ ptd->dw2 = cpu_to_le32(dw2);
+ ptd->dw3 = cpu_to_le32(dw3);
+}
+
+static void transform_add_int(struct isp1760_hcd *priv, struct isp1760_qh *qh,
+ struct isp1760_qtd *qtd, struct urb *urb,
+ u32 payload, struct ptd *ptd)
+{
+ u32 maxpacket;
+ u32 multi;
+ u32 numberofusofs;
+ u32 i;
+ u32 usofmask, usof;
+ u32 period;
+
+ maxpacket = usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe));
+ multi = 1 + ((maxpacket >> 11) & 0x3);
+ maxpacket &= 0x7ff;
+ /* length of the data per uframe */
+ maxpacket = multi * maxpacket;
+
+ numberofusofs = urb->transfer_buffer_length / maxpacket;
+ if (urb->transfer_buffer_length % maxpacket)
+ numberofusofs += 1;
+
+ usofmask = 1;
+ usof = 0;
+ for (i = 0; i < numberofusofs; i++) {
+ usof |= usofmask;
+ usofmask <<= 1;
+ }
+
+ if (urb->dev->speed != USB_SPEED_HIGH) {
+ /* split */
+ ptd->dw5 = __constant_cpu_to_le32(0x1c);
+
+ if (qh->period >= 32)
+ period = qh->period / 2;
+ else
+ period = qh->period;
+
+ } else {
+
+ if (qh->period >= 8)
+ period = qh->period/8;
+ else
+ period = qh->period;
+
+ if (period >= 32)
+ period = 16;
+
+ if (qh->period >= 8) {
+ /* millisecond period */
+ period = (period << 3);
+ } else {
+ /* usof based tranmsfers */
+ /* minimum 4 usofs */
+ usof = 0x11;
+ }
+ }
+
+ ptd->dw2 |= cpu_to_le32(period);
+ ptd->dw4 = cpu_to_le32(usof);
+}
+
+static void transform_into_int(struct isp1760_hcd *priv, struct isp1760_qh *qh,
+ struct isp1760_qtd *qtd, struct urb *urb,
+ u32 payload, struct ptd *ptd)
+{
+ transform_into_atl(priv, qh, qtd, urb, payload, ptd);
+ transform_add_int(priv, qh, qtd, urb, payload, ptd);
+}
+
+static int qtd_fill(struct isp1760_qtd *qtd, void *databuffer, size_t len,
+ u32 token)
+{
+ int count;
+
+ qtd->data_buffer = databuffer;
+ qtd->packet_type = GET_QTD_TOKEN_TYPE(token);
+ qtd->toggle = GET_DATA_TOGGLE(token);
+
+ if (len > HC_ATL_PL_SIZE)
+ count = HC_ATL_PL_SIZE;
+ else
+ count = len;
+
+ qtd->length = count;
+ return count;
+}
+
+static int check_error(struct ptd *ptd)
+{
+ int error = 0;
+ u32 dw3;
+
+ dw3 = le32_to_cpu(ptd->dw3);
+ if (dw3 & DW3_HALT_BIT)
+ error = -EPIPE;
+
+ if (dw3 & DW3_ERROR_BIT) {
+ printk(KERN_ERR "error bit is set in DW3\n");
+ error = -EPIPE;
+ }
+
+ if (dw3 & DW3_QTD_ACTIVE) {
+ printk(KERN_ERR "transfer active bit is set DW3\n");
+ printk(KERN_ERR "nak counter: %d, rl: %d\n", (dw3 >> 19) & 0xf,
+ (le32_to_cpu(ptd->dw2) >> 25) & 0xf);
+ }
+
+ return error;
+}
+
+static void check_int_err_status(u32 dw4)
+{
+ u32 i;
+
+ dw4 >>= 8;
+
+ for (i = 0; i < 8; i++) {
+ switch (dw4 & 0x7) {
+ case INT_UNDERRUN:
+ printk(KERN_ERR "ERROR: under run , %d\n", i);
+ break;
+
+ case INT_EXACT:
+ printk(KERN_ERR "ERROR: transaction error, %d\n", i);
+ break;
+
+ case INT_BABBLE:
+ printk(KERN_ERR "ERROR: babble error, %d\n", i);
+ break;
+ }
+ dw4 >>= 3;
+ }
+}
+
+static void enqueue_one_qtd(struct isp1760_qtd *qtd, struct isp1760_hcd *priv,
+ u32 payload)
+{
+ u32 token;
+ struct usb_hcd *hcd = priv_to_hcd(priv);
+
+ token = qtd->packet_type;
+
+ if (qtd->length && (qtd->length <= HC_ATL_PL_SIZE)) {
+ switch (token) {
+ case IN_PID:
+ break;
+ case OUT_PID:
+ case SETUP_PID:
+ priv_write_copy(priv, qtd->data_buffer,
+ hcd->regs + payload,
+ qtd->length);
+ }
+ }
+}
+
+static void enqueue_one_atl_qtd(u32 atl_regs, u32 payload,
+ struct isp1760_hcd *priv, struct isp1760_qh *qh,
+ struct urb *urb, u32 slot, struct isp1760_qtd *qtd)
+{
+ struct ptd ptd;
+ struct usb_hcd *hcd = priv_to_hcd(priv);
+
+ transform_into_atl(priv, qh, qtd, urb, payload, &ptd);
+ priv_write_copy(priv, (u32 *)&ptd, hcd->regs + atl_regs, sizeof(ptd));
+ enqueue_one_qtd(qtd, priv, payload);
+
+ priv->atl_ints[slot].urb = urb;
+ priv->atl_ints[slot].qh = qh;
+ priv->atl_ints[slot].qtd = qtd;
+ priv->atl_ints[slot].data_buffer = qtd->data_buffer;
+ priv->atl_ints[slot].payload = payload;
+ qtd->status |= URB_ENQUEUED | URB_TYPE_ATL;
+ qtd->status |= slot << 16;
+}
+
+static void enqueue_one_int_qtd(u32 int_regs, u32 payload,
+ struct isp1760_hcd *priv, struct isp1760_qh *qh,
+ struct urb *urb, u32 slot, struct isp1760_qtd *qtd)
+{
+ struct ptd ptd;
+ struct usb_hcd *hcd = priv_to_hcd(priv);
+
+ transform_into_int(priv, qh, qtd, urb, payload, &ptd);
+ priv_write_copy(priv, (u32 *)&ptd, hcd->regs + int_regs, sizeof(ptd));
+ enqueue_one_qtd(qtd, priv, payload);
+
+ priv->int_ints[slot].urb = urb;
+ priv->int_ints[slot].qh = qh;
+ priv->int_ints[slot].qtd = qtd;
+ priv->int_ints[slot].data_buffer = qtd->data_buffer;
+ priv->int_ints[slot].payload = payload;
+ qtd->status |= URB_ENQUEUED | URB_TYPE_INT;
+ qtd->status |= slot << 16;
+}
+
+void enqueue_an_ATL_packet(struct usb_hcd *hcd, struct isp1760_qh *qh,
+ struct isp1760_qtd *qtd)
+{
+ struct isp1760_hcd *priv = hcd_to_priv(hcd);
+ u32 skip_map, or_map;
+ u32 queue_entry;
+ u32 slot;
+ u32 atl_regs, payload;
+ u32 buffstatus;
+
+ skip_map = isp1760_readl(hcd->regs + HC_ATL_PTD_SKIPMAP_REG);
+
+ BUG_ON(!skip_map);
+ slot = __ffs(skip_map);
+ queue_entry = 1 << slot;
+
+ atl_regs = ATL_REGS_OFFSET + slot * sizeof(struct ptd);
+
+ payload = alloc_mem(priv, qtd->length);
+
+ enqueue_one_atl_qtd(atl_regs, payload, priv, qh, qtd->urb, slot, qtd);
+
+ or_map = isp1760_readl(hcd->regs + HC_ATL_IRQ_MASK_OR_REG);
+ or_map |= queue_entry;
+ isp1760_writel(or_map, hcd->regs + HC_ATL_IRQ_MASK_OR_REG);
+
+ skip_map &= ~queue_entry;
+ isp1760_writel(skip_map, hcd->regs + HC_ATL_PTD_SKIPMAP_REG);
+
+ buffstatus = isp1760_readl(hcd->regs + HC_BUFFER_STATUS_REG);
+ buffstatus |= ATL_BUFFER;
+ isp1760_writel(buffstatus, hcd->regs + HC_BUFFER_STATUS_REG);
+}
+
+void enqueue_an_INT_packet(struct usb_hcd *hcd, struct isp1760_qh *qh,
+ struct isp1760_qtd *qtd)
+{
+ struct isp1760_hcd *priv = hcd_to_priv(hcd);
+ u32 skip_map, or_map;
+ u32 queue_entry;
+ u32 slot;
+ u32 int_regs, payload;
+ u32 buffstatus;
+
+ skip_map = isp1760_readl(hcd->regs + HC_INT_PTD_SKIPMAP_REG);
+
+ BUG_ON(!skip_map);
+ slot = __ffs(skip_map);
+ queue_entry = 1 << slot;
+
+ int_regs = INT_REGS_OFFSET + slot * sizeof(struct ptd);
+
+ payload = alloc_mem(priv, qtd->length);
+
+ enqueue_one_int_qtd(int_regs, payload, priv, qh, qtd->urb, slot, qtd);
+
+ or_map = isp1760_readl(hcd->regs + HC_INT_IRQ_MASK_OR_REG);
+ or_map |= queue_entry;
+ isp1760_writel(or_map, hcd->regs + HC_INT_IRQ_MASK_OR_REG);
+
+ skip_map &= ~queue_entry;
+ isp1760_writel(skip_map, hcd->regs + HC_INT_PTD_SKIPMAP_REG);
+
+ buffstatus = isp1760_readl(hcd->regs + HC_BUFFER_STATUS_REG);
+ buffstatus |= INT_BUFFER;
+ isp1760_writel(buffstatus, hcd->regs + HC_BUFFER_STATUS_REG);
+}
+
+static void isp1760_urb_done(struct isp1760_hcd *priv, struct urb *urb, int status)
+__releases(priv->lock)
+__acquires(priv->lock)
+{
+ if (!urb->unlinked) {
+ if (status == -EINPROGRESS)
+ status = 0;
+ }
+
+ /* complete() can reenter this HCD */
+ usb_hcd_unlink_urb_from_ep(priv_to_hcd(priv), urb);
+ spin_unlock(&priv->lock);
+ usb_hcd_giveback_urb(priv_to_hcd(priv), urb, status);
+ spin_lock(&priv->lock);
+}
+
+static void isp1760_qtd_free(struct isp1760_qtd *qtd)
+{
+ kmem_cache_free(qtd_cachep, qtd);
+}
+
+static struct isp1760_qtd *clean_this_qtd(struct isp1760_qtd *qtd)
+{
+ struct isp1760_qtd *tmp_qtd;
+
+ tmp_qtd = qtd->hw_next;
+ list_del(&qtd->qtd_list);
+ isp1760_qtd_free(qtd);
+ return tmp_qtd;
+}
+
+/*
+ * Remove this QTD from the QH list and free its memory. If this QTD
+ * isn't the last one than remove also his successor(s).
+ * Returns the QTD which is part of an new URB and should be enqueued.
+ */
+static struct isp1760_qtd *clean_up_qtdlist(struct isp1760_qtd *qtd)
+{
+ struct isp1760_qtd *tmp_qtd;
+ int last_one;
+
+ do {
+ tmp_qtd = qtd->hw_next;
+ last_one = qtd->status & URB_COMPLETE_NOTIFY;
+ list_del(&qtd->qtd_list);
+ isp1760_qtd_free(qtd);
+ qtd = tmp_qtd;
+ } while (!last_one && qtd);
+
+ return qtd;
+}
+
+static void do_atl_int(struct usb_hcd *usb_hcd)
+{
+ struct isp1760_hcd *priv = hcd_to_priv(usb_hcd);
+ u32 done_map, skip_map;
+ struct ptd ptd;
+ struct urb *urb = NULL;
+ u32 atl_regs_base;
+ u32 atl_regs;
+ u32 queue_entry;
+ u32 payload;
+ u32 length;
+ u32 or_map;
+ u32 status = -EINVAL;
+ int error;
+ struct isp1760_qtd *qtd;
+ struct isp1760_qh *qh;
+ u32 rl;
+ u32 nakcount;
+
+ done_map = isp1760_readl(usb_hcd->regs +
+ HC_ATL_PTD_DONEMAP_REG);
+ skip_map = isp1760_readl(usb_hcd->regs +
+ HC_ATL_PTD_SKIPMAP_REG);
+
+ or_map = isp1760_readl(usb_hcd->regs + HC_ATL_IRQ_MASK_OR_REG);
+ or_map &= ~done_map;
+ isp1760_writel(or_map, usb_hcd->regs + HC_ATL_IRQ_MASK_OR_REG);
+
+ atl_regs_base = ATL_REGS_OFFSET;
+ while (done_map) {
+ u32 dw1;
+ u32 dw2;
+ u32 dw3;
+
+ status = 0;
+
+ queue_entry = __ffs(done_map);
+ done_map &= ~(1 << queue_entry);
+ skip_map |= 1 << queue_entry;
+
+ atl_regs = atl_regs_base + queue_entry * sizeof(struct ptd);
+
+ urb = priv->atl_ints[queue_entry].urb;
+ qtd = priv->atl_ints[queue_entry].qtd;
+ qh = priv->atl_ints[queue_entry].qh;
+ payload = priv->atl_ints[queue_entry].payload;
+
+ if (!qh) {
+ printk(KERN_ERR "qh is 0\n");
+ continue;
+ }
+ priv_read_copy(priv, (u32 *)&ptd, usb_hcd->regs + atl_regs,
+ atl_regs, sizeof(ptd));
+
+ dw1 = le32_to_cpu(ptd.dw1);
+ dw2 = le32_to_cpu(ptd.dw2);
+ dw3 = le32_to_cpu(ptd.dw3);
+ rl = (dw2 >> 25) & 0x0f;
+ nakcount = (dw3 >> 19) & 0xf;
+
+ /* Transfer Error, *but* active and no HALT -> reload */
+ if ((dw3 & DW3_ERROR_BIT) && (dw3 & DW3_QTD_ACTIVE) &&
+ !(dw3 & DW3_HALT_BIT)) {
+
+ /* according to ppriv code, we have to
+ * reload this one if trasfered bytes != requested bytes
+ * else act like everything went smooth..
+ * XXX This just doesn't feel right and hasn't
+ * triggered so far.
+ */
+
+ length = PTD_XFERRED_LENGTH(dw3);
+ printk(KERN_ERR "Should reload now.... transfered %d "
+ "of %zu\n", length, qtd->length);
+ BUG();
+ }
+
+ if (!nakcount && (dw3 & DW3_QTD_ACTIVE)) {
+ u32 buffstatus;
+
+ /* XXX
+ * NAKs are handled in HW by the chip. Usually if the
+ * device is not able to send data fast enough.
+ * This did not trigger for a long time now.
+ */
+ printk(KERN_ERR "Reloading ptd %p/%p... qh %p readed: "
+ "%d of %d done: %08x cur: %08x\n", qtd,
+ urb, qh, PTD_XFERRED_LENGTH(dw3),
+ qtd->length, done_map,
+ (1 << queue_entry));
+
+ /* RL counter = ERR counter */
+ dw3 &= ~(0xf << 19);
+ dw3 |= rl << 19;
+ dw3 &= ~(3 << (55 - 32));
+ dw3 |= ERR_COUNTER << (55 - 32);
+
+ /*
+ * It is not needed to write skip map back because it
+ * is unchanged. Just make sure that this entry is
+ * unskipped once it gets written to the HW.
+ */
+ skip_map &= ~(1 << queue_entry);
+ or_map = isp1760_readl(usb_hcd->regs +
+ HC_ATL_IRQ_MASK_OR_REG);
+ or_map |= 1 << queue_entry;
+ isp1760_writel(or_map, usb_hcd->regs +
+ HC_ATL_IRQ_MASK_OR_REG);
+
+ ptd.dw3 = cpu_to_le32(dw3);
+ priv_write_copy(priv, (u32 *)&ptd, usb_hcd->regs +
+ atl_regs, sizeof(ptd));
+
+ ptd.dw0 |= __constant_cpu_to_le32(PTD_VALID);
+ priv_write_copy(priv, (u32 *)&ptd, usb_hcd->regs +
+ atl_regs, sizeof(ptd));
+
+ buffstatus = isp1760_readl(usb_hcd->regs +
+ HC_BUFFER_STATUS_REG);
+ buffstatus |= ATL_BUFFER;
+ isp1760_writel(buffstatus, usb_hcd->regs +
+ HC_BUFFER_STATUS_REG);
+ continue;
+ }
+
+ error = check_error(&ptd);
+ if (error) {
+ status = error;
+ priv->atl_ints[queue_entry].qh->toggle = 0;
+ priv->atl_ints[queue_entry].qh->ping = 0;
+ urb->status = -EPIPE;
+
+#if 0
+ printk(KERN_ERR "Error in %s().\n", __func__);
+ printk(KERN_ERR "IN dw0: %08x dw1: %08x dw2: %08x "
+ "dw3: %08x dw4: %08x dw5: %08x dw6: "
+ "%08x dw7: %08x\n",
+ ptd.dw0, ptd.dw1, ptd.dw2, ptd.dw3,
+ ptd.dw4, ptd.dw5, ptd.dw6, ptd.dw7);
+#endif
+ } else {
+ if (usb_pipetype(urb->pipe) == PIPE_BULK) {
+ priv->atl_ints[queue_entry].qh->toggle = dw3 &
+ (1 << 25);
+ priv->atl_ints[queue_entry].qh->ping = dw3 &
+ (1 << 26);
+ }
+ }
+
+ length = PTD_XFERRED_LENGTH(dw3);
+ if (length) {
+ switch (DW1_GET_PID(dw1)) {
+ case IN_PID:
+ priv_read_copy(priv,
+ priv->atl_ints[queue_entry].data_buffer,
+ usb_hcd->regs + payload, payload,
+ length);
+
+ case OUT_PID:
+
+ urb->actual_length += length;
+
+ case SETUP_PID:
+ break;
+ }
+ }
+
+ priv->atl_ints[queue_entry].data_buffer = NULL;
+ priv->atl_ints[queue_entry].urb = NULL;
+ priv->atl_ints[queue_entry].qtd = NULL;
+ priv->atl_ints[queue_entry].qh = NULL;
+
+ free_mem(priv, payload);
+
+ isp1760_writel(skip_map, usb_hcd->regs +
+ HC_ATL_PTD_SKIPMAP_REG);
+
+ if (urb->status == -EPIPE) {
+ /* HALT was received */
+
+ qtd = clean_up_qtdlist(qtd);
+ isp1760_urb_done(priv, urb, urb->status);
+
+ } else if (usb_pipebulk(urb->pipe) && (length < qtd->length)) {
+ /* short BULK received */
+
+ printk(KERN_ERR "short bulk, %d instead %d\n", length,
+ qtd->length);
+ if (urb->transfer_flags & URB_SHORT_NOT_OK) {
+ urb->status = -EREMOTEIO;
+ printk(KERN_ERR "not okey\n");
+ }
+
+ if (urb->status == -EINPROGRESS)
+ urb->status = 0;
+
+ qtd = clean_up_qtdlist(qtd);
+
+ isp1760_urb_done(priv, urb, urb->status);
+
+ } else if (qtd->status & URB_COMPLETE_NOTIFY) {
+ /* that was the last qtd of that URB */
+
+ if (urb->status == -EINPROGRESS)
+ urb->status = 0;
+
+ qtd = clean_this_qtd(qtd);
+ isp1760_urb_done(priv, urb, urb->status);
+
+ } else {
+ /* next QTD of this URB */
+
+ qtd = clean_this_qtd(qtd);
+ BUG_ON(!qtd);
+ }
+
+ if (qtd)
+ enqueue_an_ATL_packet(usb_hcd, qh, qtd);
+
+ skip_map = isp1760_readl(usb_hcd->regs +
+ HC_ATL_PTD_SKIPMAP_REG);
+ }
+}
+
+static void do_intl_int(struct usb_hcd *usb_hcd)
+{
+ struct isp1760_hcd *priv = hcd_to_priv(usb_hcd);
+ u32 done_map, skip_map;
+ struct ptd ptd;
+ struct urb *urb = NULL;
+ u32 int_regs;
+ u32 int_regs_base;
+ u32 payload;
+ u32 length;
+ u32 or_map;
+ int error;
+ u32 queue_entry;
+ struct isp1760_qtd *qtd;
+ struct isp1760_qh *qh;
+
+ done_map = isp1760_readl(usb_hcd->regs +
+ HC_INT_PTD_DONEMAP_REG);
+ skip_map = isp1760_readl(usb_hcd->regs +
+ HC_INT_PTD_SKIPMAP_REG);
+
+ or_map = isp1760_readl(usb_hcd->regs + HC_INT_IRQ_MASK_OR_REG);
+ or_map &= ~done_map;
+ isp1760_writel(or_map, usb_hcd->regs + HC_INT_IRQ_MASK_OR_REG);
+
+ int_regs_base = INT_REGS_OFFSET;
+
+ while (done_map) {
+ u32 dw1;
+ u32 dw3;
+
+ queue_entry = __ffs(done_map);
+ done_map &= ~(1 << queue_entry);
+ skip_map |= 1 << queue_entry;
+
+ int_regs = int_regs_base + queue_entry * sizeof(struct ptd);
+ urb = priv->int_ints[queue_entry].urb;
+ qtd = priv->int_ints[queue_entry].qtd;
+ qh = priv->int_ints[queue_entry].qh;
+ payload = priv->int_ints[queue_entry].payload;
+
+ if (!qh) {
+ printk(KERN_ERR "(INT) qh is 0\n");
+ continue;
+ }
+
+ priv_read_copy(priv, (u32 *)&ptd, usb_hcd->regs + int_regs,
+ int_regs, sizeof(ptd));
+ dw1 = le32_to_cpu(ptd.dw1);
+ dw3 = le32_to_cpu(ptd.dw3);
+ check_int_err_status(le32_to_cpu(ptd.dw4));
+
+ error = check_error(&ptd);
+ if (error) {
+#if 0
+ printk(KERN_ERR "Error in %s().\n", __func__);
+ printk(KERN_ERR "IN dw0: %08x dw1: %08x dw2: %08x "
+ "dw3: %08x dw4: %08x dw5: %08x dw6: "
+ "%08x dw7: %08x\n",
+ ptd.dw0, ptd.dw1, ptd.dw2, ptd.dw3,
+ ptd.dw4, ptd.dw5, ptd.dw6, ptd.dw7);
+#endif
+ urb->status = -EPIPE;
+ priv->int_ints[queue_entry].qh->toggle = 0;
+ priv->int_ints[queue_entry].qh->ping = 0;
+
+ } else {
+ priv->int_ints[queue_entry].qh->toggle =
+ dw3 & (1 << 25);
+ priv->int_ints[queue_entry].qh->ping = dw3 & (1 << 26);
+ }
+
+ if (urb->dev->speed != USB_SPEED_HIGH)
+ length = PTD_XFERRED_LENGTH_LO(dw3);
+ else
+ length = PTD_XFERRED_LENGTH(dw3);
+
+ if (length) {
+ switch (DW1_GET_PID(dw1)) {
+ case IN_PID:
+ priv_read_copy(priv,
+ priv->int_ints[queue_entry].data_buffer,
+ usb_hcd->regs + payload , payload,
+ length);
+ case OUT_PID:
+
+ urb->actual_length += length;
+
+ case SETUP_PID:
+ break;
+ }
+ }
+
+ priv->int_ints[queue_entry].data_buffer = NULL;
+ priv->int_ints[queue_entry].urb = NULL;
+ priv->int_ints[queue_entry].qtd = NULL;
+ priv->int_ints[queue_entry].qh = NULL;
+
+ isp1760_writel(skip_map, usb_hcd->regs +
+ HC_INT_PTD_SKIPMAP_REG);
+ free_mem(priv, payload);
+
+ if (urb->status == -EPIPE) {
+ /* HALT received */
+
+ qtd = clean_up_qtdlist(qtd);
+ isp1760_urb_done(priv, urb, urb->status);
+
+ } else if (qtd->status & URB_COMPLETE_NOTIFY) {
+
+ if (urb->status == -EINPROGRESS)
+ urb->status = 0;
+
+ qtd = clean_this_qtd(qtd);
+ isp1760_urb_done(priv, urb, urb->status);
+
+ } else {
+ /* next QTD of this URB */
+
+ qtd = clean_this_qtd(qtd);
+ BUG_ON(!qtd);
+ }
+
+ if (qtd)
+ enqueue_an_INT_packet(usb_hcd, qh, qtd);
+
+ skip_map = isp1760_readl(usb_hcd->regs +
+ HC_INT_PTD_SKIPMAP_REG);
+ }
+}
+
+#define max_packet(wMaxPacketSize) ((wMaxPacketSize) & 0x07ff)
+static struct isp1760_qh *qh_make(struct isp1760_hcd *priv, struct urb *urb,
+ gfp_t flags)
+{
+ struct isp1760_qh *qh;
+ int is_input, type;
+
+ qh = isp1760_qh_alloc(priv, flags);
+ if (!qh)
+ return qh;
+
+ /*
+ * init endpoint/device data for this QH
+ */
+ is_input = usb_pipein(urb->pipe);
+ type = usb_pipetype(urb->pipe);
+
+ if (type == PIPE_INTERRUPT) {
+
+ if (urb->dev->speed == USB_SPEED_HIGH) {
+
+ qh->period = urb->interval >> 3;
+ if (qh->period == 0 && urb->interval != 1) {
+ /* NOTE interval 2 or 4 uframes could work.
+ * But interval 1 scheduling is simpler, and
+ * includes high bandwidth.
+ */
+ printk(KERN_ERR "intr period %d uframes, NYET!",
+ urb->interval);
+ qh_destroy(qh);
+ return NULL;
+ }
+ } else {
+ qh->period = urb->interval;
+ }
+ }
+
+ /* support for tt scheduling, and access to toggles */
+ qh->dev = urb->dev;
+
+ if (!usb_pipecontrol(urb->pipe))
+ usb_settoggle(urb->dev, usb_pipeendpoint(urb->pipe), !is_input,
+ 1);
+ return qh;
+}
+
+/*
+ * For control/bulk/interrupt, return QH with these TDs appended.
+ * Allocates and initializes the QH if necessary.
+ * Returns null if it can't allocate a QH it needs to.
+ * If the QH has TDs (urbs) already, that's great.
+ */
+static struct isp1760_qh *qh_append_tds(struct isp1760_hcd *priv,
+ struct urb *urb, struct list_head *qtd_list, int epnum,
+ void **ptr)
+{
+ struct isp1760_qh *qh;
+ struct isp1760_qtd *qtd;
+ struct isp1760_qtd *prev_qtd;
+
+ qh = (struct isp1760_qh *)*ptr;
+ if (!qh) {
+ /* can't sleep here, we have priv->lock... */
+ qh = qh_make(priv, urb, GFP_ATOMIC);
+ if (!qh)
+ return qh;
+ *ptr = qh;
+ }
+
+ qtd = list_entry(qtd_list->next, struct isp1760_qtd,
+ qtd_list);
+ if (!list_empty(&qh->qtd_list))
+ prev_qtd = list_entry(qh->qtd_list.prev,
+ struct isp1760_qtd, qtd_list);
+ else
+ prev_qtd = NULL;
+
+ list_splice(qtd_list, qh->qtd_list.prev);
+ if (prev_qtd) {
+ BUG_ON(prev_qtd->hw_next);
+ prev_qtd->hw_next = qtd;
+ }
+
+ urb->hcpriv = qh;
+ return qh;
+}
+
+static void qtd_list_free(struct isp1760_hcd *priv, struct urb *urb,
+ struct list_head *qtd_list)
+{
+ struct list_head *entry, *temp;
+
+ list_for_each_safe(entry, temp, qtd_list) {
+ struct isp1760_qtd *qtd;
+
+ qtd = list_entry(entry, struct isp1760_qtd, qtd_list);
+ list_del(&qtd->qtd_list);
+ isp1760_qtd_free(qtd);
+ }
+}
+
+static int isp1760_prepare_enqueue(struct isp1760_hcd *priv, struct urb *urb,
+ struct list_head *qtd_list, gfp_t mem_flags, packet_enqueue *p)
+{
+ struct isp1760_qtd *qtd;
+ int epnum;
+ unsigned long flags;
+ struct isp1760_qh *qh = NULL;
+ int rc;
+ int qh_busy;
+
+ qtd = list_entry(qtd_list->next, struct isp1760_qtd, qtd_list);
+ epnum = urb->ep->desc.bEndpointAddress;
+
+ spin_lock_irqsave(&priv->lock, flags);
+ if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &priv_to_hcd(priv)->flags)) {
+ rc = -ESHUTDOWN;
+ goto done;
+ }
+ rc = usb_hcd_link_urb_to_ep(priv_to_hcd(priv), urb);
+ if (rc)
+ goto done;
+
+ qh = urb->ep->hcpriv;
+ if (qh)
+ qh_busy = !list_empty(&qh->qtd_list);
+ else
+ qh_busy = 0;
+
+ qh = qh_append_tds(priv, urb, qtd_list, epnum, &urb->ep->hcpriv);
+ if (!qh) {
+ usb_hcd_unlink_urb_from_ep(priv_to_hcd(priv), urb);
+ rc = -ENOMEM;
+ goto done;
+ }
+
+ if (!qh_busy)
+ p(priv_to_hcd(priv), qh, qtd);
+
+done:
+ spin_unlock_irqrestore(&priv->lock, flags);
+ if (!qh)
+ qtd_list_free(priv, urb, qtd_list);
+ return rc;
+}
+
+static struct isp1760_qtd *isp1760_qtd_alloc(struct isp1760_hcd *priv,
+ gfp_t flags)
+{
+ struct isp1760_qtd *qtd;
+
+ qtd = kmem_cache_zalloc(qtd_cachep, flags);
+ if (qtd)
+ INIT_LIST_HEAD(&qtd->qtd_list);
+
+ return qtd;
+}
+
+/*
+ * create a list of filled qtds for this URB; won't link into qh.
+ */
+static struct list_head *qh_urb_transaction(struct isp1760_hcd *priv,
+ struct urb *urb, struct list_head *head, gfp_t flags)
+{
+ struct isp1760_qtd *qtd, *qtd_prev;
+ void *buf;
+ int len, maxpacket;
+ int is_input;
+ u32 token;
+
+ /*
+ * URBs map to sequences of QTDs: one logical transaction
+ */
+ qtd = isp1760_qtd_alloc(priv, flags);
+ if (!qtd)
+ return NULL;
+
+ list_add_tail(&qtd->qtd_list, head);
+ qtd->urb = urb;
+ urb->status = -EINPROGRESS;
+
+ token = 0;
+ /* for split transactions, SplitXState initialized to zero */
+
+ len = urb->transfer_buffer_length;
+ is_input = usb_pipein(urb->pipe);
+ if (usb_pipecontrol(urb->pipe)) {
+ /* SETUP pid */
+ qtd_fill(qtd, urb->setup_packet,
+ sizeof(struct usb_ctrlrequest),
+ token | SETUP_PID);
+
+ /* ... and always at least one more pid */
+ token ^= DATA_TOGGLE;
+ qtd_prev = qtd;
+ qtd = isp1760_qtd_alloc(priv, flags);
+ if (!qtd)
+ goto cleanup;
+ qtd->urb = urb;
+ qtd_prev->hw_next = qtd;
+ list_add_tail(&qtd->qtd_list, head);
+
+ /* for zero length DATA stages, STATUS is always IN */
+ if (len == 0)
+ token |= IN_PID;
+ }
+
+ /*
+ * data transfer stage: buffer setup
+ */
+ buf = urb->transfer_buffer;
+
+ if (is_input)
+ token |= IN_PID;
+ else
+ token |= OUT_PID;
+
+ maxpacket = max_packet(usb_maxpacket(urb->dev, urb->pipe, !is_input));
+
+ /*
+ * buffer gets wrapped in one or more qtds;
+ * last one may be "short" (including zero len)
+ * and may serve as a control status ack
+ */
+ for (;;) {
+ int this_qtd_len;
+
+ if (!buf && len) {
+ /* XXX This looks like usb storage / SCSI bug */
+ printk(KERN_ERR "buf is null, dma is %08lx len is %d\n",
+ (long unsigned)urb->transfer_dma, len);
+ WARN_ON(1);
+ }
+
+ this_qtd_len = qtd_fill(qtd, buf, len, token);
+ len -= this_qtd_len;
+ buf += this_qtd_len;
+
+ /* qh makes control packets use qtd toggle; maybe switch it */
+ if ((maxpacket & (this_qtd_len + (maxpacket - 1))) == 0)
+ token ^= DATA_TOGGLE;
+
+ if (len <= 0)
+ break;
+
+ qtd_prev = qtd;
+ qtd = isp1760_qtd_alloc(priv, flags);
+ if (!qtd)
+ goto cleanup;
+ qtd->urb = urb;
+ qtd_prev->hw_next = qtd;
+ list_add_tail(&qtd->qtd_list, head);
+ }
+
+ /*
+ * control requests may need a terminating data "status" ack;
+ * bulk ones may need a terminating short packet (zero length).
+ */
+ if (urb->transfer_buffer_length != 0) {
+ int one_more = 0;
+
+ if (usb_pipecontrol(urb->pipe)) {
+ one_more = 1;
+ /* "in" <--> "out" */
+ token ^= IN_PID;
+ /* force DATA1 */
+ token |= DATA_TOGGLE;
+ } else if (usb_pipebulk(urb->pipe)
+ && (urb->transfer_flags & URB_ZERO_PACKET)
+ && !(urb->transfer_buffer_length % maxpacket)) {
+ one_more = 1;
+ }
+ if (one_more) {
+ qtd_prev = qtd;
+ qtd = isp1760_qtd_alloc(priv, flags);
+ if (!qtd)
+ goto cleanup;
+ qtd->urb = urb;
+ qtd_prev->hw_next = qtd;
+ list_add_tail(&qtd->qtd_list, head);
+
+ /* never any data in such packets */
+ qtd_fill(qtd, NULL, 0, token);
+ }
+ }
+
+ qtd->status = URB_COMPLETE_NOTIFY;
+ return head;
+
+cleanup:
+ qtd_list_free(priv, urb, head);
+ return NULL;
+}
+
+static int isp1760_urb_enqueue(struct usb_hcd *hcd, struct urb *urb,
+ gfp_t mem_flags)
+{
+ struct isp1760_hcd *priv = hcd_to_priv(hcd);
+ struct list_head qtd_list;
+ packet_enqueue *pe;
+
+ INIT_LIST_HEAD(&qtd_list);
+
+ switch (usb_pipetype(urb->pipe)) {
+ case PIPE_CONTROL:
+ case PIPE_BULK:
+
+ if (!qh_urb_transaction(priv, urb, &qtd_list, mem_flags))
+ return -ENOMEM;
+ pe = enqueue_an_ATL_packet;
+ break;
+
+ case PIPE_INTERRUPT:
+ if (!qh_urb_transaction(priv, urb, &qtd_list, mem_flags))
+ return -ENOMEM;
+ pe = enqueue_an_INT_packet;
+ break;
+
+ case PIPE_ISOCHRONOUS:
+ printk(KERN_ERR "PIPE_ISOCHRONOUS ain't supported\n");
+ default:
+ return -EPIPE;
+ }
+
+ isp1760_prepare_enqueue(priv, urb, &qtd_list, mem_flags, pe);
+ return 0;
+}
+
+static int isp1760_urb_dequeue(struct usb_hcd *hcd, struct urb *urb,
+ int status)
+{
+ struct isp1760_hcd *priv = hcd_to_priv(hcd);
+ struct inter_packet_info *ints;
+ u32 i;
+ u32 reg_base, or_reg, skip_reg;
+ int flags;
+ struct ptd ptd;
+
+ switch (usb_pipetype(urb->pipe)) {
+ case PIPE_ISOCHRONOUS:
+ return -EPIPE;
+ break;
+
+ case PIPE_INTERRUPT:
+ ints = priv->int_ints;
+ reg_base = INT_REGS_OFFSET;
+ or_reg = HC_INT_IRQ_MASK_OR_REG;
+ skip_reg = HC_INT_PTD_SKIPMAP_REG;
+ break;
+
+ default:
+ ints = priv->atl_ints;
+ reg_base = ATL_REGS_OFFSET;
+ or_reg = HC_ATL_IRQ_MASK_OR_REG;
+ skip_reg = HC_ATL_PTD_SKIPMAP_REG;
+ break;
+ }
+
+ memset(&ptd, 0, sizeof(ptd));
+ spin_lock_irqsave(&priv->lock, flags);
+
+ for (i = 0; i < 32; i++) {
+ if (ints->urb == urb) {
+ u32 skip_map;
+ u32 or_map;
+ struct isp1760_qtd *qtd;
+
+ skip_map = isp1760_readl(hcd->regs + skip_reg);
+ skip_map |= 1 << i;
+ isp1760_writel(skip_map, hcd->regs + skip_reg);
+
+ or_map = isp1760_readl(hcd->regs + or_reg);
+ or_map &= ~(1 << i);
+ isp1760_writel(or_map, hcd->regs + or_reg);
+
+ priv_write_copy(priv, (u32 *)&ptd, hcd->regs + reg_base
+ + i * sizeof(ptd), sizeof(ptd));
+ qtd = ints->qtd;
+
+ clean_up_qtdlist(qtd);
+
+ free_mem(priv, ints->payload);
+
+ ints->urb = NULL;
+ ints->qh = NULL;
+ ints->qtd = NULL;
+ ints->data_buffer = NULL;
+ ints->payload = 0;
+
+ isp1760_urb_done(priv, urb, status);
+ break;
+ }
+ ints++;
+ }
+
+ spin_unlock_irqrestore(&priv->lock, flags);
+ return 0;
+}
+
+static irqreturn_t isp1760_irq(struct usb_hcd *usb_hcd)
+{
+ struct isp1760_hcd *priv = hcd_to_priv(usb_hcd);
+ u32 imask;
+ irqreturn_t irqret = IRQ_NONE;
+
+ spin_lock(&priv->lock);
+
+ if (!(usb_hcd->state & HC_STATE_RUNNING))
+ goto leave;
+
+ imask = isp1760_readl(usb_hcd->regs + HC_INTERRUPT_REG);
+ if (unlikely(!imask))
+ goto leave;
+
+ isp1760_writel(imask, usb_hcd->regs + HC_INTERRUPT_REG);
+ if (imask & HC_ATL_INT)
+ do_atl_int(usb_hcd);
+
+ if (imask & HC_INTL_INT)
+ do_intl_int(usb_hcd);
+
+ irqret = IRQ_HANDLED;
+leave:
+ spin_unlock(&priv->lock);
+ return irqret;
+}
+
+static int isp1760_hub_status_data(struct usb_hcd *hcd, char *buf)
+{
+ struct isp1760_hcd *priv = hcd_to_priv(hcd);
+ u32 temp, status = 0;
+ u32 mask;
+ int retval = 1;
+ unsigned long flags;
+
+ /* if !USB_SUSPEND, root hub timers won't get shut down ... */
+ if (!HC_IS_RUNNING(hcd->state))
+ return 0;
+
+ /* init status to no-changes */
+ buf[0] = 0;
+ mask = PORT_CSC;
+
+ spin_lock_irqsave(&priv->lock, flags);
+ temp = isp1760_readl(hcd->regs + HC_PORTSC1);
+
+ if (temp & PORT_OWNER) {
+ if (temp & PORT_CSC) {
+ temp &= ~PORT_CSC;
+ isp1760_writel(temp, hcd->regs + HC_PORTSC1);
+ goto done;
+ }
+ }
+
+ /*
+ * Return status information even for ports with OWNER set.
+ * Otherwise khubd wouldn't see the disconnect event when a
+ * high-speed device is switched over to the companion
+ * controller by the user.
+ */
+
+ if ((temp & mask) != 0
+ || ((temp & PORT_RESUME) != 0
+ && time_after_eq(jiffies,
+ priv->reset_done))) {
+ buf [0] |= 1 << (0 + 1);
+ status = STS_PCD;
+ }
+ /* FIXME autosuspend idle root hubs */
+done:
+ spin_unlock_irqrestore(&priv->lock, flags);
+ return status ? retval : 0;
+}
+
+static void isp1760_hub_descriptor(struct isp1760_hcd *priv,
+ struct usb_hub_descriptor *desc)
+{
+ int ports = HCS_N_PORTS(priv->hcs_params);
+ u16 temp;
+
+ desc->bDescriptorType = 0x29;
+ /* priv 1.0, 2.3.9 says 20ms max */
+ desc->bPwrOn2PwrGood = 10;
+ desc->bHubContrCurrent = 0;
+
+ desc->bNbrPorts = ports;
+ temp = 1 + (ports / 8);
+ desc->bDescLength = 7 + 2 * temp;
+
+ /* two bitmaps: ports removable, and usb 1.0 legacy PortPwrCtrlMask */
+ memset(&desc->bitmap[0], 0, temp);
+ memset(&desc->bitmap[temp], 0xff, temp);
+
+ /* per-port overcurrent reporting */
+ temp = 0x0008;
+ if (HCS_PPC(priv->hcs_params))
+ /* per-port power control */
+ temp |= 0x0001;
+ else
+ /* no power switching */
+ temp |= 0x0002;
+ desc->wHubCharacteristics = cpu_to_le16(temp);
+}
+
+#define PORT_WAKE_BITS (PORT_WKOC_E|PORT_WKDISC_E|PORT_WKCONN_E)
+
+static int check_reset_complete(struct isp1760_hcd *priv, int index,
+ u32 __iomem *status_reg, int port_status)
+{
+ if (!(port_status & PORT_CONNECT))
+ return port_status;
+
+ /* if reset finished and it's still not enabled -- handoff */
+ if (!(port_status & PORT_PE)) {
+
+ printk(KERN_ERR "port %d full speed --> companion\n",
+ index + 1);
+
+ port_status |= PORT_OWNER;
+ port_status &= ~PORT_RWC_BITS;
+ isp1760_writel(port_status, status_reg);
+
+ } else
+ printk(KERN_ERR "port %d high speed\n", index + 1);
+
+ return port_status;
+}
+
+static int isp1760_hub_control(struct usb_hcd *hcd, u16 typeReq,
+ u16 wValue, u16 wIndex, char *buf, u16 wLength)
+{
+ struct isp1760_hcd *priv = hcd_to_priv(hcd);
+ int ports = HCS_N_PORTS(priv->hcs_params);
+ u32 __iomem *status_reg = hcd->regs + HC_PORTSC1;
+ u32 temp, status;
+ unsigned long flags;
+ int retval = 0;
+ unsigned selector;
+
+ /*
+ * FIXME: support SetPortFeatures USB_PORT_FEAT_INDICATOR.
+ * HCS_INDICATOR may say we can change LEDs to off/amber/green.
+ * (track current state ourselves) ... blink for diagnostics,
+ * power, "this is the one", etc. EHCI spec supports this.
+ */
+
+ spin_lock_irqsave(&priv->lock, flags);
+ switch (typeReq) {
+ case ClearHubFeature:
+ switch (wValue) {
+ case C_HUB_LOCAL_POWER:
+ case C_HUB_OVER_CURRENT:
+ /* no hub-wide feature/status flags */
+ break;
+ default:
+ goto error;
+ }
+ break;
+ case ClearPortFeature:
+ if (!wIndex || wIndex > ports)
+ goto error;
+ wIndex--;
+ temp = isp1760_readl(status_reg);
+
+ /*
+ * Even if OWNER is set, so the port is owned by the
+ * companion controller, khubd needs to be able to clear
+ * the port-change status bits (especially
+ * USB_PORT_FEAT_C_CONNECTION).
+ */
+
+ switch (wValue) {
+ case USB_PORT_FEAT_ENABLE:
+ isp1760_writel(temp & ~PORT_PE, status_reg);
+ break;
+ case USB_PORT_FEAT_C_ENABLE:
+ /* XXX error? */
+ break;
+ case USB_PORT_FEAT_SUSPEND:
+ if (temp & PORT_RESET)
+ goto error;
+
+ if (temp & PORT_SUSPEND) {
+ if ((temp & PORT_PE) == 0)
+ goto error;
+ /* resume signaling for 20 msec */
+ temp &= ~(PORT_RWC_BITS);
+ isp1760_writel(temp | PORT_RESUME,
+ status_reg);
+ priv->reset_done = jiffies +
+ msecs_to_jiffies(20);
+ }
+ break;
+ case USB_PORT_FEAT_C_SUSPEND:
+ /* we auto-clear this feature */
+ break;
+ case USB_PORT_FEAT_POWER:
+ if (HCS_PPC(priv->hcs_params))
+ isp1760_writel(temp & ~PORT_POWER, status_reg);
+ break;
+ case USB_PORT_FEAT_C_CONNECTION:
+ isp1760_writel(temp | PORT_CSC,
+ status_reg);
+ break;
+ case USB_PORT_FEAT_C_OVER_CURRENT:
+ /* XXX error ?*/
+ break;
+ case USB_PORT_FEAT_C_RESET:
+ /* GetPortStatus clears reset */
+ break;
+ default:
+ goto error;
+ }
+ isp1760_readl(hcd->regs + HC_USBCMD);
+ break;
+ case GetHubDescriptor:
+ isp1760_hub_descriptor(priv, (struct usb_hub_descriptor *)
+ buf);
+ break;
+ case GetHubStatus:
+ /* no hub-wide feature/status flags */
+ memset(buf, 0, 4);
+ break;
+ case GetPortStatus:
+ if (!wIndex || wIndex > ports)
+ goto error;
+ wIndex--;
+ status = 0;
+ temp = isp1760_readl(status_reg);
+
+ /* wPortChange bits */
+ if (temp & PORT_CSC)
+ status |= 1 << USB_PORT_FEAT_C_CONNECTION;
+
+
+ /* whoever resumes must GetPortStatus to complete it!! */
+ if (temp & PORT_RESUME) {
+ printk(KERN_ERR "Port resume should be skipped.\n");
+
+ /* Remote Wakeup received? */
+ if (!priv->reset_done) {
+ /* resume signaling for 20 msec */
+ priv->reset_done = jiffies
+ + msecs_to_jiffies(20);
+ /* check the port again */
+ mod_timer(&priv_to_hcd(priv)->rh_timer,
+ priv->reset_done);
+ }
+
+ /* resume completed? */
+ else if (time_after_eq(jiffies,
+ priv->reset_done)) {
+ status |= 1 << USB_PORT_FEAT_C_SUSPEND;
+ priv->reset_done = 0;
+
+ /* stop resume signaling */
+ temp = isp1760_readl(status_reg);
+ isp1760_writel(
+ temp & ~(PORT_RWC_BITS | PORT_RESUME),
+ status_reg);
+ retval = handshake(priv, status_reg,
+ PORT_RESUME, 0, 2000 /* 2msec */);
+ if (retval != 0) {
+ isp1760_err(priv,
+ "port %d resume error %d\n",
+ wIndex + 1, retval);
+ goto error;
+ }
+ temp &= ~(PORT_SUSPEND|PORT_RESUME|(3<<10));
+ }
+ }
+
+ /* whoever resets must GetPortStatus to complete it!! */
+ if ((temp & PORT_RESET)
+ && time_after_eq(jiffies,
+ priv->reset_done)) {
+ status |= 1 << USB_PORT_FEAT_C_RESET;
+ priv->reset_done = 0;
+
+ /* force reset to complete */
+ isp1760_writel(temp & ~PORT_RESET,
+ status_reg);
+ /* REVISIT: some hardware needs 550+ usec to clear
+ * this bit; seems too long to spin routinely...
+ */
+ retval = handshake(priv, status_reg,
+ PORT_RESET, 0, 750);
+ if (retval != 0) {
+ isp1760_err(priv, "port %d reset error %d\n",
+ wIndex + 1, retval);
+ goto error;
+ }
+
+ /* see what we found out */
+ temp = check_reset_complete(priv, wIndex, status_reg,
+ isp1760_readl(status_reg));
+ }
+ /*
+ * Even if OWNER is set, there's no harm letting khubd
+ * see the wPortStatus values (they should all be 0 except
+ * for PORT_POWER anyway).
+ */
+
+ if (temp & PORT_OWNER)
+ printk(KERN_ERR "Warning: PORT_OWNER is set\n");
+
+ if (temp & PORT_CONNECT) {
+ status |= 1 << USB_PORT_FEAT_CONNECTION;
+ /* status may be from integrated TT */
+ status |= ehci_port_speed(priv, temp);
+ }
+ if (temp & PORT_PE)
+ status |= 1 << USB_PORT_FEAT_ENABLE;
+ if (temp & (PORT_SUSPEND|PORT_RESUME))
+ status |= 1 << USB_PORT_FEAT_SUSPEND;
+ if (temp & PORT_RESET)
+ status |= 1 << USB_PORT_FEAT_RESET;
+ if (temp & PORT_POWER)
+ status |= 1 << USB_PORT_FEAT_POWER;
+
+ put_unaligned(cpu_to_le32(status), (__le32 *) buf);
+ break;
+ case SetHubFeature:
+ switch (wValue) {
+ case C_HUB_LOCAL_POWER:
+ case C_HUB_OVER_CURRENT:
+ /* no hub-wide feature/status flags */
+ break;
+ default:
+ goto error;
+ }
+ break;
+ case SetPortFeature:
+ selector = wIndex >> 8;
+ wIndex &= 0xff;
+ if (!wIndex || wIndex > ports)
+ goto error;
+ wIndex--;
+ temp = isp1760_readl(status_reg);
+ if (temp & PORT_OWNER)
+ break;
+
+/* temp &= ~PORT_RWC_BITS; */
+ switch (wValue) {
+ case USB_PORT_FEAT_ENABLE:
+ isp1760_writel(temp | PORT_PE, status_reg);
+ break;
+
+ case USB_PORT_FEAT_SUSPEND:
+ if ((temp & PORT_PE) == 0
+ || (temp & PORT_RESET) != 0)
+ goto error;
+
+ isp1760_writel(temp | PORT_SUSPEND, status_reg);
+ break;
+ case USB_PORT_FEAT_POWER:
+ if (HCS_PPC(priv->hcs_params))
+ isp1760_writel(temp | PORT_POWER,
+ status_reg);
+ break;
+ case USB_PORT_FEAT_RESET:
+ if (temp & PORT_RESUME)
+ goto error;
+ /* line status bits may report this as low speed,
+ * which can be fine if this root hub has a
+ * transaction translator built in.
+ */
+ if ((temp & (PORT_PE|PORT_CONNECT)) == PORT_CONNECT
+ && PORT_USB11(temp)) {
+ temp |= PORT_OWNER;
+ } else {
+ temp |= PORT_RESET;
+ temp &= ~PORT_PE;
+
+ /*
+ * caller must wait, then call GetPortStatus
+ * usb 2.0 spec says 50 ms resets on root
+ */
+ priv->reset_done = jiffies +
+ msecs_to_jiffies(50);
+ }
+ isp1760_writel(temp, status_reg);
+ break;
+ default:
+ goto error;
+ }
+ isp1760_readl(hcd->regs + HC_USBCMD);
+ break;
+
+ default:
+error:
+ /* "stall" on error */
+ retval = -EPIPE;
+ }
+ spin_unlock_irqrestore(&priv->lock, flags);
+ return retval;
+}
+
+static void isp1760_endpoint_disable(struct usb_hcd *usb_hcd,
+ struct usb_host_endpoint *ep)
+{
+ struct isp1760_hcd *priv = hcd_to_priv(usb_hcd);
+ struct isp1760_qh *qh;
+ struct isp1760_qtd *qtd;
+ u32 flags;
+
+ spin_lock_irqsave(&priv->lock, flags);
+ qh = ep->hcpriv;
+ if (!qh)
+ goto out;
+
+ ep->hcpriv = NULL;
+ do {
+ /* more than entry might get removed */
+ if (list_empty(&qh->qtd_list))
+ break;
+
+ qtd = list_first_entry(&qh->qtd_list, struct isp1760_qtd,
+ qtd_list);
+
+ if (qtd->status & URB_ENQUEUED) {
+
+ spin_unlock_irqrestore(&priv->lock, flags);
+ isp1760_urb_dequeue(usb_hcd, qtd->urb, -ECONNRESET);
+ spin_lock_irqsave(&priv->lock, flags);
+ } else {
+ struct urb *urb;
+
+ urb = qtd->urb;
+ clean_up_qtdlist(qtd);
+ isp1760_urb_done(priv, urb, -ECONNRESET);
+ }
+ } while (1);
+
+ qh_destroy(qh);
+ /* remove requests and leak them.
+ * ATL are pretty fast done, INT could take a while...
+ * The latter shoule be removed
+ */
+out:
+ spin_unlock_irqrestore(&priv->lock, flags);
+}
+
+static int isp1760_get_frame(struct usb_hcd *hcd)
+{
+ struct isp1760_hcd *priv = hcd_to_priv(hcd);
+ u32 fr;
+
+ fr = isp1760_readl(hcd->regs + HC_FRINDEX);
+ return (fr >> 3) % priv->periodic_size;
+}
+
+static void isp1760_stop(struct usb_hcd *hcd)
+{
+ struct isp1760_hcd *priv = hcd_to_priv(hcd);
+
+ isp1760_hub_control(hcd, ClearPortFeature, USB_PORT_FEAT_POWER, 1,
+ NULL, 0);
+ mdelay(20);
+
+ spin_lock_irq(&priv->lock);
+ ehci_reset(priv);
+ /* Disable IRQ */
+ isp1760_writel(HW_DATA_BUS_32BIT, hcd->regs + HC_HW_MODE_CTRL);
+ spin_unlock_irq(&priv->lock);
+
+ isp1760_writel(0, hcd->regs + HC_CONFIGFLAG);
+}
+
+static void isp1760_shutdown(struct usb_hcd *hcd)
+{
+ u32 command;
+
+ isp1760_stop(hcd);
+ isp1760_writel(HW_DATA_BUS_32BIT, hcd->regs + HC_HW_MODE_CTRL);
+
+ command = isp1760_readl(hcd->regs + HC_USBCMD);
+ command &= ~CMD_RUN;
+ isp1760_writel(command, hcd->regs + HC_USBCMD);
+}
+
+static const struct hc_driver isp1760_hc_driver = {
+ .description = "isp1760-hcd",
+ .product_desc = "NXP ISP1760 USB Host Controller",
+ .hcd_priv_size = sizeof(struct isp1760_hcd),
+ .irq = isp1760_irq,
+ .flags = HCD_MEMORY | HCD_USB2,
+ .reset = isp1760_hc_setup,
+ .start = isp1760_run,
+ .stop = isp1760_stop,
+ .shutdown = isp1760_shutdown,
+ .urb_enqueue = isp1760_urb_enqueue,
+ .urb_dequeue = isp1760_urb_dequeue,
+ .endpoint_disable = isp1760_endpoint_disable,
+ .get_frame_number = isp1760_get_frame,
+ .hub_status_data = isp1760_hub_status_data,
+ .hub_control = isp1760_hub_control,
+};
+
+int __init init_kmem_once(void)
+{
+ qtd_cachep = kmem_cache_create("isp1760_qtd",
+ sizeof(struct isp1760_qtd), 0, SLAB_TEMPORARY |
+ SLAB_MEM_SPREAD, NULL);
+
+ if (!qtd_cachep)
+ return -ENOMEM;
+
+ qh_cachep = kmem_cache_create("isp1760_qh", sizeof(struct isp1760_qh),
+ 0, SLAB_TEMPORARY | SLAB_MEM_SPREAD, NULL);
+
+ if (!qh_cachep) {
+ kmem_cache_destroy(qtd_cachep);
+ return -ENOMEM;
+ }
+
+ return 0;
+}
+
+void deinit_kmem_cache(void)
+{
+ kmem_cache_destroy(qtd_cachep);
+ kmem_cache_destroy(qh_cachep);
+}
+
+struct usb_hcd *isp1760_register(u64 res_start, u64 res_len, int irq,
+ u64 irqflags, struct device *dev, const char *busname)
+{
+ struct usb_hcd *hcd;
+ struct isp1760_hcd *priv;
+ int ret;
+
+ if (usb_disabled())
+ return ERR_PTR(-ENODEV);
+
+ /* prevent usb-core allocating DMA pages */
+ dev->dma_mask = NULL;
+
+ hcd = usb_create_hcd(&isp1760_hc_driver, dev, dev->bus_id);
+ if (!hcd)
+ return ERR_PTR(-ENOMEM);
+
+ priv = hcd_to_priv(hcd);
+ init_memory(priv);
+ hcd->regs = ioremap(res_start, res_len);
+ if (!hcd->regs) {
+ ret = -EIO;
+ goto err_put;
+ }
+
+ ret = usb_add_hcd(hcd, irq, irqflags);
+ if (ret)
+ goto err_unmap;
+
+ hcd->irq = irq;
+ hcd->rsrc_start = res_start;
+ hcd->rsrc_len = res_len;
+
+ return hcd;
+
+err_unmap:
+ iounmap(hcd->regs);
+
+err_put:
+ usb_put_hcd(hcd);
+
+ return ERR_PTR(ret);
+}
+
+MODULE_DESCRIPTION("Driver for the ISP1760 USB-controller from NXP");
+MODULE_AUTHOR("Sebastian Siewior <bigeasy@linuxtronix.de>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/usb/host/isp1760-hcd.h b/drivers/usb/host/isp1760-hcd.h
new file mode 100644
index 000000000000..3d86d0f6b147
--- /dev/null
+++ b/drivers/usb/host/isp1760-hcd.h
@@ -0,0 +1,206 @@
+#ifndef _ISP1760_HCD_H_
+#define _ISP1760_HCD_H_
+
+/* exports for if */
+struct usb_hcd *isp1760_register(u64 res_start, u64 res_len, int irq,
+ u64 irqflags, struct device *dev, const char *busname);
+int init_kmem_once(void);
+void deinit_kmem_cache(void);
+
+/* EHCI capability registers */
+#define HC_CAPLENGTH 0x00
+#define HC_HCSPARAMS 0x04
+#define HC_HCCPARAMS 0x08
+
+/* EHCI operational registers */
+#define HC_USBCMD 0x20
+#define HC_USBSTS 0x24
+#define HC_FRINDEX 0x2c
+#define HC_CONFIGFLAG 0x60
+#define HC_PORTSC1 0x64
+#define HC_ISO_PTD_DONEMAP_REG 0x130
+#define HC_ISO_PTD_SKIPMAP_REG 0x134
+#define HC_ISO_PTD_LASTPTD_REG 0x138
+#define HC_INT_PTD_DONEMAP_REG 0x140
+#define HC_INT_PTD_SKIPMAP_REG 0x144
+#define HC_INT_PTD_LASTPTD_REG 0x148
+#define HC_ATL_PTD_DONEMAP_REG 0x150
+#define HC_ATL_PTD_SKIPMAP_REG 0x154
+#define HC_ATL_PTD_LASTPTD_REG 0x158
+
+/* Configuration Register */
+#define HC_HW_MODE_CTRL 0x300
+#define ALL_ATX_RESET (1 << 31)
+#define HW_DATA_BUS_32BIT (1 << 8)
+#define HW_DACK_POL_HIGH (1 << 6)
+#define HW_DREQ_POL_HIGH (1 << 5)
+#define HW_INTR_HIGH_ACT (1 << 2)
+#define HW_INTR_EDGE_TRIG (1 << 1)
+#define HW_GLOBAL_INTR_EN (1 << 0)
+
+#define HC_CHIP_ID_REG 0x304
+#define HC_SCRATCH_REG 0x308
+
+#define HC_RESET_REG 0x30c
+#define SW_RESET_RESET_HC (1 << 1)
+#define SW_RESET_RESET_ALL (1 << 0)
+
+#define HC_BUFFER_STATUS_REG 0x334
+#define ATL_BUFFER 0x1
+#define INT_BUFFER 0x2
+#define ISO_BUFFER 0x4
+#define BUFFER_MAP 0x7
+
+#define HC_MEMORY_REG 0x33c
+#define HC_PORT1_CTRL 0x374
+#define PORT1_POWER (3 << 3)
+#define PORT1_INIT1 (1 << 7)
+#define PORT1_INIT2 (1 << 23)
+
+/* Interrupt Register */
+#define HC_INTERRUPT_REG 0x310
+
+#define HC_INTERRUPT_ENABLE 0x314
+#define INTERRUPT_ENABLE_MASK (HC_INTL_INT | HC_ATL_INT | HC_EOT_INT)
+#define FINAL_HW_CONFIG (HW_GLOBAL_INTR_EN | HW_DATA_BUS_32BIT)
+
+#define HC_ISO_INT (1 << 9)
+#define HC_ATL_INT (1 << 8)
+#define HC_INTL_INT (1 << 7)
+#define HC_EOT_INT (1 << 3)
+#define HC_SOT_INT (1 << 1)
+
+#define HC_ISO_IRQ_MASK_OR_REG 0x318
+#define HC_INT_IRQ_MASK_OR_REG 0x31C
+#define HC_ATL_IRQ_MASK_OR_REG 0x320
+#define HC_ISO_IRQ_MASK_AND_REG 0x324
+#define HC_INT_IRQ_MASK_AND_REG 0x328
+#define HC_ATL_IRQ_MASK_AND_REG 0x32C
+
+/* Register sets */
+#define HC_BEGIN_OF_ATL 0x0c00
+#define HC_BEGIN_OF_INT 0x0800
+#define HC_BEGIN_OF_ISO 0x0400
+#define HC_BEGIN_OF_PAYLOAD 0x1000
+
+/* urb state*/
+#define DELETE_URB (0x0008)
+#define NO_TRANSFER_ACTIVE (0xffffffff)
+
+#define ATL_REGS_OFFSET (0xc00)
+#define INT_REGS_OFFSET (0x800)
+
+/* Philips Transfer Descriptor (PTD) */
+struct ptd {
+ __le32 dw0;
+ __le32 dw1;
+ __le32 dw2;
+ __le32 dw3;
+ __le32 dw4;
+ __le32 dw5;
+ __le32 dw6;
+ __le32 dw7;
+};
+
+struct inter_packet_info {
+ void *data_buffer;
+ u32 payload;
+#define PTD_FIRE_NEXT (1 << 0)
+#define PTD_URB_FINISHED (1 << 1)
+ struct urb *urb;
+ struct isp1760_qh *qh;
+ struct isp1760_qtd *qtd;
+};
+
+
+typedef void (packet_enqueue)(struct usb_hcd *hcd, struct isp1760_qh *qh,
+ struct isp1760_qtd *qtd);
+
+#define isp1760_info(priv, fmt, args...) \
+ dev_info(priv_to_hcd(priv)->self.controller, fmt, ##args)
+
+#define isp1760_err(priv, fmt, args...) \
+ dev_err(priv_to_hcd(priv)->self.controller, fmt, ##args)
+
+/* chip memory management */
+struct memory_chunk {
+ unsigned int start;
+ unsigned int size;
+ unsigned int free;
+};
+
+/*
+ * 60kb divided in:
+ * - 32 blocks @ 256 bytes
+ * - 20 blocks @ 1024 bytes
+ * - 4 blocks @ 8192 bytes
+ */
+
+#define BLOCK_1_NUM 32
+#define BLOCK_2_NUM 20
+#define BLOCK_3_NUM 4
+
+#define BLOCK_1_SIZE 256
+#define BLOCK_2_SIZE 1024
+#define BLOCK_3_SIZE 8192
+#define BLOCKS (BLOCK_1_NUM + BLOCK_2_NUM + BLOCK_3_NUM)
+#define PAYLOAD_SIZE 0xf000
+
+/* I saw if some reloads if the pointer was negative */
+#define ISP1760_NULL_POINTER (0x400)
+
+/* ATL */
+/* DW0 */
+#define PTD_VALID 1
+#define PTD_LENGTH(x) (((u32) x) << 3)
+#define PTD_MAXPACKET(x) (((u32) x) << 18)
+#define PTD_MULTI(x) (((u32) x) << 29)
+#define PTD_ENDPOINT(x) (((u32) x) << 31)
+/* DW1 */
+#define PTD_DEVICE_ADDR(x) (((u32) x) << 3)
+#define PTD_PID_TOKEN(x) (((u32) x) << 10)
+#define PTD_TRANS_BULK ((u32) 2 << 12)
+#define PTD_TRANS_INT ((u32) 3 << 12)
+#define PTD_TRANS_SPLIT ((u32) 1 << 14)
+#define PTD_SE_USB_LOSPEED ((u32) 2 << 16)
+#define PTD_PORT_NUM(x) (((u32) x) << 18)
+#define PTD_HUB_NUM(x) (((u32) x) << 25)
+#define PTD_PING(x) (((u32) x) << 26)
+/* DW2 */
+#define PTD_RL_CNT(x) (((u32) x) << 25)
+#define PTD_DATA_START_ADDR(x) (((u32) x) << 8)
+#define BASE_ADDR 0x1000
+/* DW3 */
+#define PTD_CERR(x) (((u32) x) << 23)
+#define PTD_NAC_CNT(x) (((u32) x) << 19)
+#define PTD_ACTIVE ((u32) 1 << 31)
+#define PTD_DATA_TOGGLE(x) (((u32) x) << 25)
+
+#define DW3_HALT_BIT (1 << 30)
+#define DW3_ERROR_BIT (1 << 28)
+#define DW3_QTD_ACTIVE (1 << 31)
+
+#define INT_UNDERRUN (1 << 2)
+#define INT_BABBLE (1 << 1)
+#define INT_EXACT (1 << 0)
+
+#define DW1_GET_PID(x) (((x) >> 10) & 0x3)
+#define PTD_XFERRED_LENGTH(x) ((x) & 0x7fff)
+#define PTD_XFERRED_LENGTH_LO(x) ((x) & 0x7ff)
+
+#define SETUP_PID (2)
+#define IN_PID (1)
+#define OUT_PID (0)
+#define GET_QTD_TOKEN_TYPE(x) ((x) & 0x3)
+
+#define DATA_TOGGLE (1 << 31)
+#define GET_DATA_TOGGLE(x) ((x) >> 31)
+
+/* Errata 1 */
+#define RL_COUNTER (0)
+#define NAK_COUNTER (0)
+#define ERR_COUNTER (2)
+
+#define HC_ATL_PL_SIZE (8192)
+
+#endif
diff --git a/drivers/usb/host/isp1760-if.c b/drivers/usb/host/isp1760-if.c
new file mode 100644
index 000000000000..73fb2a38f1e4
--- /dev/null
+++ b/drivers/usb/host/isp1760-if.c
@@ -0,0 +1,298 @@
+/*
+ * Glue code for the ISP1760 driver and bus
+ * Currently there is support for
+ * - OpenFirmware
+ * - PCI
+ *
+ * (c) 2007 Sebastian Siewior <bigeasy@linutronix.de>
+ *
+ */
+
+#include <linux/usb.h>
+#include <linux/io.h>
+
+#include "../core/hcd.h"
+#include "isp1760-hcd.h"
+
+#ifdef CONFIG_USB_ISP1760_OF
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#endif
+
+#ifdef CONFIG_USB_ISP1760_PCI
+#include <linux/pci.h>
+#endif
+
+#ifdef CONFIG_USB_ISP1760_OF
+static int of_isp1760_probe(struct of_device *dev,
+ const struct of_device_id *match)
+{
+ struct usb_hcd *hcd;
+ struct device_node *dp = dev->node;
+ struct resource *res;
+ struct resource memory;
+ struct of_irq oirq;
+ int virq;
+ u64 res_len;
+ int ret;
+
+ ret = of_address_to_resource(dp, 0, &memory);
+ if (ret)
+ return -ENXIO;
+
+ res = request_mem_region(memory.start, memory.end - memory.start + 1,
+ dev->dev.bus_id);
+ if (!res)
+ return -EBUSY;
+
+ res_len = memory.end - memory.start + 1;
+
+ if (of_irq_map_one(dp, 0, &oirq)) {
+ ret = -ENODEV;
+ goto release_reg;
+ }
+
+ virq = irq_create_of_mapping(oirq.controller, oirq.specifier,
+ oirq.size);
+
+ hcd = isp1760_register(memory.start, res_len, virq,
+ IRQF_SHARED | IRQF_DISABLED, &dev->dev, dev->dev.bus_id);
+ if (IS_ERR(hcd)) {
+ ret = PTR_ERR(hcd);
+ goto release_reg;
+ }
+
+ dev_set_drvdata(&dev->dev, hcd);
+ return ret;
+
+release_reg:
+ release_mem_region(memory.start, memory.end - memory.start + 1);
+ return ret;
+}
+
+static int of_isp1760_remove(struct of_device *dev)
+{
+ struct usb_hcd *hcd = dev_get_drvdata(&dev->dev);
+
+ dev_set_drvdata(&dev->dev, NULL);
+
+ usb_remove_hcd(hcd);
+ iounmap(hcd->regs);
+ release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+ usb_put_hcd(hcd);
+ return 0;
+}
+
+static struct of_device_id of_isp1760_match[] = {
+ {
+ .compatible = "nxp,usb-isp1760",
+ },
+ { },
+};
+MODULE_DEVICE_TABLE(of, of_isp1760_match);
+
+static struct of_platform_driver isp1760_of_driver = {
+ .name = "nxp-isp1760",
+ .match_table = of_isp1760_match,
+ .probe = of_isp1760_probe,
+ .remove = of_isp1760_remove,
+};
+#endif
+
+#ifdef CONFIG_USB_ISP1760_PCI
+static u32 nxp_pci_io_base;
+static u32 iolength;
+static u32 pci_mem_phy0;
+static u32 length;
+static u8 *chip_addr;
+static u8 *iobase;
+
+static int __devinit isp1761_pci_probe(struct pci_dev *dev,
+ const struct pci_device_id *id)
+{
+ u8 latency, limit;
+ __u32 reg_data;
+ int retry_count;
+ int length;
+ int status = 1;
+ struct usb_hcd *hcd;
+
+ if (usb_disabled())
+ return -ENODEV;
+
+ if (pci_enable_device(dev) < 0)
+ return -ENODEV;
+
+ if (!dev->irq)
+ return -ENODEV;
+
+ /* Grab the PLX PCI mem maped port start address we need */
+ nxp_pci_io_base = pci_resource_start(dev, 0);
+ iolength = pci_resource_len(dev, 0);
+
+ if (!request_mem_region(nxp_pci_io_base, iolength, "ISP1761 IO MEM")) {
+ printk(KERN_ERR "request region #1\n");
+ return -EBUSY;
+ }
+
+ iobase = ioremap_nocache(nxp_pci_io_base, iolength);
+ if (!iobase) {
+ printk(KERN_ERR "ioremap #1\n");
+ release_mem_region(nxp_pci_io_base, iolength);
+ return -ENOMEM;
+ }
+ /* Grab the PLX PCI shared memory of the ISP 1761 we need */
+ pci_mem_phy0 = pci_resource_start(dev, 3);
+ length = pci_resource_len(dev, 3);
+
+ if (length < 0xffff) {
+ printk(KERN_ERR "memory length for this resource is less than "
+ "required\n");
+ release_mem_region(nxp_pci_io_base, iolength);
+ iounmap(iobase);
+ return -ENOMEM;
+ }
+
+ if (!request_mem_region(pci_mem_phy0, length, "ISP-PCI")) {
+ printk(KERN_ERR "host controller already in use\n");
+ release_mem_region(nxp_pci_io_base, iolength);
+ iounmap(iobase);
+ return -EBUSY;
+ }
+
+ /* bad pci latencies can contribute to overruns */
+ pci_read_config_byte(dev, PCI_LATENCY_TIMER, &latency);
+ if (latency) {
+ pci_read_config_byte(dev, PCI_MAX_LAT, &limit);
+ if (limit && limit < latency)
+ pci_write_config_byte(dev, PCI_LATENCY_TIMER, limit);
+ }
+
+ /* Try to check whether we can access Scratch Register of
+ * Host Controller or not. The initial PCI access is retried until
+ * local init for the PCI bridge is completed
+ */
+ retry_count = 20;
+ reg_data = 0;
+ while ((reg_data != 0xFACE) && retry_count) {
+ /*by default host is in 16bit mode, so
+ * io operations at this stage must be 16 bit
+ * */
+ writel(0xface, chip_addr + HC_SCRATCH_REG);
+ udelay(100);
+ reg_data = readl(chip_addr + HC_SCRATCH_REG);
+ retry_count--;
+ }
+
+ /* Host Controller presence is detected by writing to scratch register
+ * and reading back and checking the contents are same or not
+ */
+ if (reg_data != 0xFACE) {
+ err("scratch register mismatch %x", reg_data);
+ goto clean;
+ }
+
+ pci_set_master(dev);
+
+ status = readl(iobase + 0x68);
+ status |= 0x900;
+ writel(status, iobase + 0x68);
+
+ dev->dev.dma_mask = NULL;
+ hcd = isp1760_register(pci_mem_phy0, length, dev->irq,
+ IRQF_SHARED | IRQF_DISABLED, &dev->dev, dev->dev.bus_id);
+ pci_set_drvdata(dev, hcd);
+ if (!hcd)
+ return 0;
+clean:
+ status = -ENODEV;
+ iounmap(iobase);
+ release_mem_region(pci_mem_phy0, length);
+ release_mem_region(nxp_pci_io_base, iolength);
+ return status;
+}
+static void isp1761_pci_remove(struct pci_dev *dev)
+{
+ struct usb_hcd *hcd;
+
+ hcd = pci_get_drvdata(dev);
+
+ usb_remove_hcd(hcd);
+ iounmap(hcd->regs);
+ release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+ usb_put_hcd(hcd);
+
+ pci_disable_device(dev);
+
+ iounmap(iobase);
+ iounmap(chip_addr);
+
+ release_mem_region(nxp_pci_io_base, iolength);
+ release_mem_region(pci_mem_phy0, length);
+}
+
+static void isp1761_pci_shutdown(struct pci_dev *dev)
+{
+ printk(KERN_ERR "ips1761_pci_shutdown\n");
+}
+
+static const struct pci_device_id isp1760_plx [] = { {
+ /* handle any USB 2.0 EHCI controller */
+ PCI_DEVICE_CLASS(((PCI_CLASS_BRIDGE_OTHER << 8) | (0x06 << 16)), ~0),
+ .driver_data = 0,
+},
+{ /* end: all zeroes */ }
+};
+MODULE_DEVICE_TABLE(pci, isp1760_plx);
+
+static struct pci_driver isp1761_pci_driver = {
+ .name = "isp1760",
+ .id_table = isp1760_plx,
+ .probe = isp1761_pci_probe,
+ .remove = isp1761_pci_remove,
+ .shutdown = isp1761_pci_shutdown,
+};
+#endif
+
+static int __init isp1760_init(void)
+{
+ int ret;
+
+ init_kmem_once();
+
+#ifdef CONFIG_USB_ISP1760_OF
+ ret = of_register_platform_driver(&isp1760_of_driver);
+ if (ret) {
+ deinit_kmem_cache();
+ return ret;
+ }
+#endif
+#ifdef CONFIG_USB_ISP1760_PCI
+ ret = pci_register_driver(&isp1761_pci_driver);
+ if (ret)
+ goto unreg_of;
+#endif
+ return ret;
+
+#ifdef CONFIG_USB_ISP1760_PCI
+unreg_of:
+#endif
+#ifdef CONFIG_USB_ISP1760_OF
+ of_unregister_platform_driver(&isp1760_of_driver);
+#endif
+ deinit_kmem_cache();
+ return ret;
+}
+module_init(isp1760_init);
+
+static void __exit isp1760_exit(void)
+{
+#ifdef CONFIG_USB_ISP1760_OF
+ of_unregister_platform_driver(&isp1760_of_driver);
+#endif
+#ifdef CONFIG_USB_ISP1760_PCI
+ pci_unregister_driver(&isp1761_pci_driver);
+#endif
+ deinit_kmem_cache();
+}
+module_exit(isp1760_exit);
diff --git a/drivers/usb/host/ohci-hub.c b/drivers/usb/host/ohci-hub.c
index 17dc2eccda83..79a78029f896 100644
--- a/drivers/usb/host/ohci-hub.c
+++ b/drivers/usb/host/ohci-hub.c
@@ -613,7 +613,7 @@ static void start_hnp(struct ohci_hcd *ohci);
static inline int root_port_reset (struct ohci_hcd *ohci, unsigned port)
{
__hc32 __iomem *portstat = &ohci->regs->roothub.portstatus [port];
- u32 temp;
+ u32 temp = 0;
u16 now = ohci_readl(ohci, &ohci->regs->fmnumber);
u16 reset_done = now + PORT_RESET_MSEC;
int limit_1 = DIV_ROUND_UP(PORT_RESET_MSEC, PORT_RESET_HW_MSEC);
diff --git a/drivers/usb/host/uhci-hcd.c b/drivers/usb/host/uhci-hcd.c
index d3e0d8aa3980..3a7bfe7a8874 100644
--- a/drivers/usb/host/uhci-hcd.c
+++ b/drivers/usb/host/uhci-hcd.c
@@ -234,7 +234,7 @@ static int resume_detect_interrupts_are_broken(struct uhci_hcd *uhci)
return 0;
}
-static int remote_wakeup_is_broken(struct uhci_hcd *uhci)
+static int global_suspend_mode_is_broken(struct uhci_hcd *uhci)
{
int port;
const char *sys_info;
@@ -261,27 +261,60 @@ __releases(uhci->lock)
__acquires(uhci->lock)
{
int auto_stop;
- int int_enable, egsm_enable;
+ int int_enable, egsm_enable, wakeup_enable;
struct usb_device *rhdev = uhci_to_hcd(uhci)->self.root_hub;
auto_stop = (new_state == UHCI_RH_AUTO_STOPPED);
dev_dbg(&rhdev->dev, "%s%s\n", __func__,
(auto_stop ? " (auto-stop)" : ""));
- /* Enable resume-detect interrupts if they work.
- * Then enter Global Suspend mode if _it_ works, still configured.
+ /* Start off by assuming Resume-Detect interrupts and EGSM work
+ * and that remote wakeups should be enabled.
*/
egsm_enable = USBCMD_EGSM;
- uhci->working_RD = 1;
+ uhci->RD_enable = 1;
int_enable = USBINTR_RESUME;
- if (remote_wakeup_is_broken(uhci))
- egsm_enable = 0;
- if (resume_detect_interrupts_are_broken(uhci) || !egsm_enable ||
+ wakeup_enable = 1;
+
+ /* In auto-stop mode wakeups must always be detected, but
+ * Resume-Detect interrupts may be prohibited. (In the absence
+ * of CONFIG_PM, they are always disallowed.)
+ */
+ if (auto_stop) {
+ if (!device_may_wakeup(&rhdev->dev))
+ int_enable = 0;
+
+ /* In bus-suspend mode wakeups may be disabled, but if they are
+ * allowed then so are Resume-Detect interrupts.
+ */
+ } else {
#ifdef CONFIG_PM
- (!auto_stop && !rhdev->do_remote_wakeup) ||
+ if (!rhdev->do_remote_wakeup)
+ wakeup_enable = 0;
#endif
- (auto_stop && !device_may_wakeup(&rhdev->dev)))
- uhci->working_RD = int_enable = 0;
+ }
+
+ /* EGSM causes the root hub to echo a 'K' signal (resume) out any
+ * port which requests a remote wakeup. According to the USB spec,
+ * every hub is supposed to do this. But if we are ignoring
+ * remote-wakeup requests anyway then there's no point to it.
+ * We also shouldn't enable EGSM if it's broken.
+ */
+ if (!wakeup_enable || global_suspend_mode_is_broken(uhci))
+ egsm_enable = 0;
+
+ /* If we're ignoring wakeup events then there's no reason to
+ * enable Resume-Detect interrupts. We also shouldn't enable
+ * them if they are broken or disallowed.
+ *
+ * This logic may lead us to enabling RD but not EGSM. The UHCI
+ * spec foolishly says that RD works only when EGSM is on, but
+ * there's no harm in enabling it anyway -- perhaps some chips
+ * will implement it!
+ */
+ if (!wakeup_enable || resume_detect_interrupts_are_broken(uhci) ||
+ !int_enable)
+ uhci->RD_enable = int_enable = 0;
outw(int_enable, uhci->io_addr + USBINTR);
outw(egsm_enable | USBCMD_CF, uhci->io_addr + USBCMD);
@@ -308,7 +341,11 @@ __acquires(uhci->lock)
uhci->rh_state = new_state;
uhci->is_stopped = UHCI_IS_STOPPED;
- uhci_to_hcd(uhci)->poll_rh = !int_enable;
+
+ /* If interrupts don't work and remote wakeup is enabled then
+ * the suspended root hub needs to be polled.
+ */
+ uhci_to_hcd(uhci)->poll_rh = (!int_enable && wakeup_enable);
uhci_scan_schedule(uhci);
uhci_fsbr_off(uhci);
@@ -344,9 +381,12 @@ __acquires(uhci->lock)
* for 20 ms.
*/
if (uhci->rh_state == UHCI_RH_SUSPENDED) {
+ unsigned egsm;
+
+ /* Keep EGSM on if it was set before */
+ egsm = inw(uhci->io_addr + USBCMD) & USBCMD_EGSM;
uhci->rh_state = UHCI_RH_RESUMING;
- outw(USBCMD_FGR | USBCMD_EGSM | USBCMD_CF,
- uhci->io_addr + USBCMD);
+ outw(USBCMD_FGR | USBCMD_CF | egsm, uhci->io_addr + USBCMD);
spin_unlock_irq(&uhci->lock);
msleep(20);
spin_lock_irq(&uhci->lock);
@@ -801,8 +841,10 @@ static int uhci_pci_resume(struct usb_hcd *hcd)
spin_unlock_irq(&uhci->lock);
- if (!uhci->working_RD) {
- /* Suspended root hub needs to be polled */
+ /* If interrupts don't work and remote wakeup is enabled then
+ * the suspended root hub needs to be polled.
+ */
+ if (!uhci->RD_enable && hcd->self.root_hub->do_remote_wakeup) {
hcd->poll_rh = 1;
usb_hcd_poll_rh_status(hcd);
}
diff --git a/drivers/usb/host/uhci-hcd.h b/drivers/usb/host/uhci-hcd.h
index 340d6ed3e6e9..7d01c5677f92 100644
--- a/drivers/usb/host/uhci-hcd.h
+++ b/drivers/usb/host/uhci-hcd.h
@@ -400,8 +400,9 @@ struct uhci_hcd {
unsigned int scan_in_progress:1; /* Schedule scan is running */
unsigned int need_rescan:1; /* Redo the schedule scan */
unsigned int dead:1; /* Controller has died */
- unsigned int working_RD:1; /* Suspended root hub doesn't
- need to be polled */
+ unsigned int RD_enable:1; /* Suspended root hub with
+ Resume-Detect interrupts
+ enabled */
unsigned int is_initialized:1; /* Data structure is usable */
unsigned int fsbr_is_on:1; /* FSBR is turned on */
unsigned int fsbr_is_wanted:1; /* Does any URB want FSBR? */
diff --git a/drivers/usb/misc/ldusb.c b/drivers/usb/misc/ldusb.c
index 11580e81e2c6..7aafd53fbcab 100644
--- a/drivers/usb/misc/ldusb.c
+++ b/drivers/usb/misc/ldusb.c
@@ -148,7 +148,7 @@ MODULE_PARM_DESC(min_interrupt_out_interval, "Minimum interrupt out interval in
/* Structure to hold all of our device specific stuff */
struct ld_usb {
- struct semaphore sem; /* locks this structure */
+ struct mutex mutex; /* locks this structure */
struct usb_interface* intf; /* save off the usb interface pointer */
int open_count; /* number of times this port has been opened */
@@ -319,7 +319,7 @@ static int ld_usb_open(struct inode *inode, struct file *file)
return -ENODEV;
/* lock this device */
- if (down_interruptible(&dev->sem))
+ if (mutex_lock_interruptible(&dev->mutex))
return -ERESTARTSYS;
/* allow opening only once */
@@ -358,7 +358,7 @@ static int ld_usb_open(struct inode *inode, struct file *file)
file->private_data = dev;
unlock_exit:
- up(&dev->sem);
+ mutex_unlock(&dev->mutex);
return retval;
}
@@ -378,7 +378,7 @@ static int ld_usb_release(struct inode *inode, struct file *file)
goto exit;
}
- if (down_interruptible(&dev->sem)) {
+ if (mutex_lock_interruptible(&dev->mutex)) {
retval = -ERESTARTSYS;
goto exit;
}
@@ -389,7 +389,7 @@ static int ld_usb_release(struct inode *inode, struct file *file)
}
if (dev->intf == NULL) {
/* the device was unplugged before the file was released */
- up(&dev->sem);
+ mutex_unlock(&dev->mutex);
/* unlock here as ld_usb_delete frees dev */
ld_usb_delete(dev);
goto exit;
@@ -402,7 +402,7 @@ static int ld_usb_release(struct inode *inode, struct file *file)
dev->open_count = 0;
unlock_exit:
- up(&dev->sem);
+ mutex_unlock(&dev->mutex);
exit:
return retval;
@@ -448,7 +448,7 @@ static ssize_t ld_usb_read(struct file *file, char __user *buffer, size_t count,
goto exit;
/* lock this object */
- if (down_interruptible(&dev->sem)) {
+ if (mutex_lock_interruptible(&dev->mutex)) {
retval = -ERESTARTSYS;
goto exit;
}
@@ -505,7 +505,7 @@ static ssize_t ld_usb_read(struct file *file, char __user *buffer, size_t count,
unlock_exit:
/* unlock the device */
- up(&dev->sem);
+ mutex_unlock(&dev->mutex);
exit:
return retval;
@@ -528,7 +528,7 @@ static ssize_t ld_usb_write(struct file *file, const char __user *buffer,
goto exit;
/* lock this object */
- if (down_interruptible(&dev->sem)) {
+ if (mutex_lock_interruptible(&dev->mutex)) {
retval = -ERESTARTSYS;
goto exit;
}
@@ -602,7 +602,7 @@ static ssize_t ld_usb_write(struct file *file, const char __user *buffer,
unlock_exit:
/* unlock the device */
- up(&dev->sem);
+ mutex_unlock(&dev->mutex);
exit:
return retval;
@@ -651,7 +651,7 @@ static int ld_usb_probe(struct usb_interface *intf, const struct usb_device_id *
dev_err(&intf->dev, "Out of memory\n");
goto exit;
}
- init_MUTEX(&dev->sem);
+ mutex_init(&dev->mutex);
spin_lock_init(&dev->rbsl);
dev->intf = intf;
init_waitqueue_head(&dev->read_wait);
@@ -765,15 +765,15 @@ static void ld_usb_disconnect(struct usb_interface *intf)
/* give back our minor */
usb_deregister_dev(intf, &ld_usb_class);
- down(&dev->sem);
+ mutex_lock(&dev->mutex);
/* if the device is not opened, then we clean up right now */
if (!dev->open_count) {
- up(&dev->sem);
+ mutex_unlock(&dev->mutex);
ld_usb_delete(dev);
} else {
dev->intf = NULL;
- up(&dev->sem);
+ mutex_unlock(&dev->mutex);
}
dev_info(&intf->dev, "LD USB Device #%d now disconnected\n",
diff --git a/drivers/usb/misc/usbtest.c b/drivers/usb/misc/usbtest.c
index a51983854ca0..742be3c35947 100644
--- a/drivers/usb/misc/usbtest.c
+++ b/drivers/usb/misc/usbtest.c
@@ -79,30 +79,10 @@ static struct usb_device *testdev_to_usbdev (struct usbtest_dev *test)
/* set up all urbs so they can be used with either bulk or interrupt */
#define INTERRUPT_RATE 1 /* msec/transfer */
-#define xprintk(tdev,level,fmt,args...) \
- dev_printk(level , &(tdev)->intf->dev , fmt , ## args)
-
-#ifdef DEBUG
-#define DBG(dev,fmt,args...) \
- xprintk(dev , KERN_DEBUG , fmt , ## args)
-#else
-#define DBG(dev,fmt,args...) \
- do { } while (0)
-#endif /* DEBUG */
-
-#ifdef VERBOSE
-#define VDBG DBG
-#else
-#define VDBG(dev,fmt,args...) \
- do { } while (0)
-#endif /* VERBOSE */
-
-#define ERROR(dev,fmt,args...) \
- xprintk(dev , KERN_ERR , fmt , ## args)
-#define WARN(dev,fmt,args...) \
- xprintk(dev , KERN_WARNING , fmt , ## args)
-#define INFO(dev,fmt,args...) \
- xprintk(dev , KERN_INFO , fmt , ## args)
+#define ERROR(tdev, fmt, args...) \
+ dev_err(&(tdev)->intf->dev , fmt , ## args)
+#define WARN(tdev, fmt, args...) \
+ dev_warn(&(tdev)->intf->dev , fmt , ## args)
/*-------------------------------------------------------------------------*/
@@ -236,7 +216,7 @@ static struct urb *simple_alloc_urb (
static unsigned pattern = 0;
module_param (pattern, uint, S_IRUGO);
-// MODULE_PARM_DESC (pattern, "i/o pattern (0 == zeroes)");
+MODULE_PARM_DESC(pattern, "i/o pattern (0 == zeroes)");
static inline void simple_fill_buf (struct urb *urb)
{
@@ -257,7 +237,7 @@ static inline void simple_fill_buf (struct urb *urb)
}
}
-static inline int simple_check_buf (struct urb *urb)
+static inline int simple_check_buf(struct usbtest_dev *tdev, struct urb *urb)
{
unsigned i;
u8 expected;
@@ -285,7 +265,7 @@ static inline int simple_check_buf (struct urb *urb)
}
if (*buf == expected)
continue;
- dbg ("buf[%d] = %d (not %d)", i, *buf, expected);
+ ERROR(tdev, "buf[%d] = %d (not %d)\n", i, *buf, expected);
return -EINVAL;
}
return 0;
@@ -299,6 +279,7 @@ static void simple_free_urb (struct urb *urb)
}
static int simple_io (
+ struct usbtest_dev *tdev,
struct urb *urb,
int iterations,
int vary,
@@ -324,7 +305,7 @@ static int simple_io (
retval = urb->status;
urb->dev = udev;
if (retval == 0 && usb_pipein (urb->pipe))
- retval = simple_check_buf (urb);
+ retval = simple_check_buf(tdev, urb);
if (vary) {
int len = urb->transfer_buffer_length;
@@ -341,7 +322,7 @@ static int simple_io (
urb->transfer_buffer_length = max;
if (expected != retval)
- dev_dbg (&udev->dev,
+ dev_err(&udev->dev,
"%s failed, iterations left %d, status %d (not %d)\n",
label, iterations, retval, expected);
return retval;
@@ -357,7 +338,7 @@ static int simple_io (
static void free_sglist (struct scatterlist *sg, int nents)
{
unsigned i;
-
+
if (!sg)
return;
for (i = 0; i < nents; i++) {
@@ -415,7 +396,7 @@ alloc_sglist (int nents, int max, int vary)
}
static int perform_sglist (
- struct usb_device *udev,
+ struct usbtest_dev *tdev,
unsigned iterations,
int pipe,
struct usb_sg_request *req,
@@ -423,6 +404,7 @@ static int perform_sglist (
int nents
)
{
+ struct usb_device *udev = testdev_to_usbdev(tdev);
int retval = 0;
while (retval == 0 && iterations-- > 0) {
@@ -431,7 +413,7 @@ static int perform_sglist (
? (INTERRUPT_RATE << 3)
: INTERRUPT_RATE,
sg, nents, 0, GFP_KERNEL);
-
+
if (retval)
break;
usb_sg_wait (req);
@@ -446,7 +428,8 @@ static int perform_sglist (
// failure if retval is as we expected ...
if (retval)
- dbg ("perform_sglist failed, iterations left %d, status %d",
+ ERROR(tdev, "perform_sglist failed, "
+ "iterations left %d, status %d\n",
iterations, retval);
return retval;
}
@@ -505,28 +488,28 @@ static int set_altsetting (struct usbtest_dev *dev, int alternate)
alternate);
}
-static int is_good_config (char *buf, int len)
+static int is_good_config(struct usbtest_dev *tdev, int len)
{
struct usb_config_descriptor *config;
-
+
if (len < sizeof *config)
return 0;
- config = (struct usb_config_descriptor *) buf;
+ config = (struct usb_config_descriptor *) tdev->buf;
switch (config->bDescriptorType) {
case USB_DT_CONFIG:
case USB_DT_OTHER_SPEED_CONFIG:
if (config->bLength != 9) {
- dbg ("bogus config descriptor length");
+ ERROR(tdev, "bogus config descriptor length\n");
return 0;
}
/* this bit 'must be 1' but often isn't */
if (!realworld && !(config->bmAttributes & 0x80)) {
- dbg ("high bit of config attributes not set");
+ ERROR(tdev, "high bit of config attributes not set\n");
return 0;
}
if (config->bmAttributes & 0x1f) { /* reserved == 0 */
- dbg ("reserved config bits set");
+ ERROR(tdev, "reserved config bits set\n");
return 0;
}
break;
@@ -538,7 +521,7 @@ static int is_good_config (char *buf, int len)
return 1;
if (le16_to_cpu(config->wTotalLength) >= TBUF_SIZE) /* max partial read */
return 1;
- dbg ("bogus config descriptor read size");
+ ERROR(tdev, "bogus config descriptor read size\n");
return 0;
}
@@ -571,7 +554,7 @@ static int ch9_postconfig (struct usbtest_dev *dev)
/* 9.2.3 constrains the range here */
alt = iface->altsetting [i].desc.bAlternateSetting;
if (alt < 0 || alt >= iface->num_altsetting) {
- dev_dbg (&iface->dev,
+ dev_err(&iface->dev,
"invalid alt [%d].bAltSetting = %d\n",
i, alt);
}
@@ -583,7 +566,7 @@ static int ch9_postconfig (struct usbtest_dev *dev)
/* [9.4.10] set_interface */
retval = set_altsetting (dev, alt);
if (retval) {
- dev_dbg (&iface->dev, "can't set_interface = %d, %d\n",
+ dev_err(&iface->dev, "can't set_interface = %d, %d\n",
alt, retval);
return retval;
}
@@ -591,7 +574,7 @@ static int ch9_postconfig (struct usbtest_dev *dev)
/* [9.4.4] get_interface always works */
retval = get_altsetting (dev);
if (retval != alt) {
- dev_dbg (&iface->dev, "get alt should be %d, was %d\n",
+ dev_err(&iface->dev, "get alt should be %d, was %d\n",
alt, retval);
return (retval < 0) ? retval : -EDOM;
}
@@ -611,7 +594,7 @@ static int ch9_postconfig (struct usbtest_dev *dev)
USB_DIR_IN | USB_RECIP_DEVICE,
0, 0, dev->buf, 1, USB_CTRL_GET_TIMEOUT);
if (retval != 1 || dev->buf [0] != expected) {
- dev_dbg (&iface->dev, "get config --> %d %d (1 %d)\n",
+ dev_err(&iface->dev, "get config --> %d %d (1 %d)\n",
retval, dev->buf[0], expected);
return (retval < 0) ? retval : -EDOM;
}
@@ -621,7 +604,7 @@ static int ch9_postconfig (struct usbtest_dev *dev)
retval = usb_get_descriptor (udev, USB_DT_DEVICE, 0,
dev->buf, sizeof udev->descriptor);
if (retval != sizeof udev->descriptor) {
- dev_dbg (&iface->dev, "dev descriptor --> %d\n", retval);
+ dev_err(&iface->dev, "dev descriptor --> %d\n", retval);
return (retval < 0) ? retval : -EDOM;
}
@@ -629,8 +612,8 @@ static int ch9_postconfig (struct usbtest_dev *dev)
for (i = 0; i < udev->descriptor.bNumConfigurations; i++) {
retval = usb_get_descriptor (udev, USB_DT_CONFIG, i,
dev->buf, TBUF_SIZE);
- if (!is_good_config (dev->buf, retval)) {
- dev_dbg (&iface->dev,
+ if (!is_good_config(dev, retval)) {
+ dev_err(&iface->dev,
"config [%d] descriptor --> %d\n",
i, retval);
return (retval < 0) ? retval : -EDOM;
@@ -650,14 +633,14 @@ static int ch9_postconfig (struct usbtest_dev *dev)
sizeof (struct usb_qualifier_descriptor));
if (retval == -EPIPE) {
if (udev->speed == USB_SPEED_HIGH) {
- dev_dbg (&iface->dev,
+ dev_err(&iface->dev,
"hs dev qualifier --> %d\n",
retval);
return (retval < 0) ? retval : -EDOM;
}
/* usb2.0 but not high-speed capable; fine */
} else if (retval != sizeof (struct usb_qualifier_descriptor)) {
- dev_dbg (&iface->dev, "dev qualifier --> %d\n", retval);
+ dev_err(&iface->dev, "dev qualifier --> %d\n", retval);
return (retval < 0) ? retval : -EDOM;
} else
d = (struct usb_qualifier_descriptor *) dev->buf;
@@ -669,8 +652,8 @@ static int ch9_postconfig (struct usbtest_dev *dev)
retval = usb_get_descriptor (udev,
USB_DT_OTHER_SPEED_CONFIG, i,
dev->buf, TBUF_SIZE);
- if (!is_good_config (dev->buf, retval)) {
- dev_dbg (&iface->dev,
+ if (!is_good_config(dev, retval)) {
+ dev_err(&iface->dev,
"other speed config --> %d\n",
retval);
return (retval < 0) ? retval : -EDOM;
@@ -683,7 +666,7 @@ static int ch9_postconfig (struct usbtest_dev *dev)
/* [9.4.5] get_status always works */
retval = usb_get_status (udev, USB_RECIP_DEVICE, 0, dev->buf);
if (retval != 2) {
- dev_dbg (&iface->dev, "get dev status --> %d\n", retval);
+ dev_err(&iface->dev, "get dev status --> %d\n", retval);
return (retval < 0) ? retval : -EDOM;
}
@@ -693,11 +676,11 @@ static int ch9_postconfig (struct usbtest_dev *dev)
retval = usb_get_status (udev, USB_RECIP_INTERFACE,
iface->altsetting [0].desc.bInterfaceNumber, dev->buf);
if (retval != 2) {
- dev_dbg (&iface->dev, "get interface status --> %d\n", retval);
+ dev_err(&iface->dev, "get interface status --> %d\n", retval);
return (retval < 0) ? retval : -EDOM;
}
// FIXME get status for each endpoint in the interface
-
+
return 0;
}
@@ -752,8 +735,9 @@ static void ctrl_complete (struct urb *urb)
*/
if (subcase->number > 0) {
if ((subcase->number - ctx->last) != 1) {
- dbg ("subcase %d completed out of order, last %d",
- subcase->number, ctx->last);
+ ERROR(ctx->dev,
+ "subcase %d completed out of order, last %d\n",
+ subcase->number, ctx->last);
status = -EDOM;
ctx->last = subcase->number;
goto error;
@@ -777,7 +761,7 @@ static void ctrl_complete (struct urb *urb)
else if (subcase->number == 12 && status == -EPIPE)
status = 0;
else
- dbg ("subtest %d error, status %d",
+ ERROR(ctx->dev, "subtest %d error, status %d\n",
subcase->number, status);
}
@@ -788,9 +772,12 @@ error:
int i;
ctx->status = status;
- info ("control queue %02x.%02x, err %d, %d left",
+ ERROR(ctx->dev, "control queue %02x.%02x, err %d, "
+ "%d left, subcase %d, len %d/%d\n",
reqp->bRequestType, reqp->bRequest,
- status, ctx->count);
+ status, ctx->count, subcase->number,
+ urb->actual_length,
+ urb->transfer_buffer_length);
/* FIXME this "unlink everything" exit route should
* be a separate test case.
@@ -799,7 +786,8 @@ error:
/* unlink whatever's still pending */
for (i = 1; i < ctx->param->sglen; i++) {
struct urb *u = ctx->urb [
- (i + subcase->number) % ctx->param->sglen];
+ (i + subcase->number)
+ % ctx->param->sglen];
if (u == urb || !u->dev)
continue;
@@ -812,7 +800,8 @@ error:
case -EIDRM:
continue;
default:
- dbg ("urb unlink --> %d", status);
+ ERROR(ctx->dev, "urb unlink --> %d\n",
+ status);
}
}
status = ctx->status;
@@ -822,14 +811,15 @@ error:
/* resubmit if we need to, else mark this as done */
if ((status == 0) && (ctx->pending < ctx->count)) {
if ((status = usb_submit_urb (urb, GFP_ATOMIC)) != 0) {
- dbg ("can't resubmit ctrl %02x.%02x, err %d",
+ ERROR(ctx->dev,
+ "can't resubmit ctrl %02x.%02x, err %d\n",
reqp->bRequestType, reqp->bRequest, status);
urb->dev = NULL;
} else
ctx->pending++;
} else
urb->dev = NULL;
-
+
/* signal completion when nothing's queued */
if (ctx->pending == 0)
complete (&ctx->complete);
@@ -918,11 +908,11 @@ test_ctrl_queue (struct usbtest_dev *dev, struct usbtest_param *param)
req.wValue = cpu_to_le16 (USB_DT_INTERFACE << 8);
// interface == 0
len = sizeof (struct usb_interface_descriptor);
- expected = EPIPE;
+ expected = -EPIPE;
break;
// NOTE: two consecutive stalls in the queue here.
// that tests fault recovery a bit more aggressively.
- case 8: // clear endpoint halt (USUALLY STALLS)
+ case 8: // clear endpoint halt (MAY STALL)
req.bRequest = USB_REQ_CLEAR_FEATURE;
req.bRequestType = USB_RECIP_ENDPOINT;
// wValue 0 == ep halt
@@ -965,7 +955,7 @@ test_ctrl_queue (struct usbtest_dev *dev, struct usbtest_param *param)
break;
case 14: // short read; try to fill the last packet
req.wValue = cpu_to_le16 ((USB_DT_DEVICE << 8) | 0);
- // device descriptor size == 18 bytes
+ /* device descriptor size == 18 bytes */
len = udev->descriptor.bMaxPacketSize0;
switch (len) {
case 8: len = 24; break;
@@ -974,7 +964,7 @@ test_ctrl_queue (struct usbtest_dev *dev, struct usbtest_param *param)
expected = -EREMOTEIO;
break;
default:
- err ("bogus number of ctrl queue testcases!");
+ ERROR(dev, "bogus number of ctrl queue testcases!\n");
context.status = -EINVAL;
goto cleanup;
}
@@ -1003,7 +993,7 @@ test_ctrl_queue (struct usbtest_dev *dev, struct usbtest_param *param)
for (i = 0; i < param->sglen; i++) {
context.status = usb_submit_urb (urb [i], GFP_ATOMIC);
if (context.status != 0) {
- dbg ("can't submit urb[%d], status %d",
+ ERROR(dev, "can't submit urb[%d], status %d\n",
i, context.status);
context.count = context.pending;
break;
@@ -1070,7 +1060,7 @@ static int unlink1 (struct usbtest_dev *dev, int pipe, int size, int async)
* due to errors, or is just NAKing requests.
*/
if ((retval = usb_submit_urb (urb, GFP_KERNEL)) != 0) {
- dev_dbg (&dev->intf->dev, "submit fail %d\n", retval);
+ dev_err(&dev->intf->dev, "submit fail %d\n", retval);
return retval;
}
@@ -1087,13 +1077,13 @@ retry:
* "normal" drivers would prevent resubmission, but
* since we're testing unlink paths, we can't.
*/
- dev_dbg (&dev->intf->dev, "unlink retry\n");
+ ERROR(dev, "unlink retry\n");
goto retry;
}
} else
usb_kill_urb (urb);
if (!(retval == 0 || retval == -EINPROGRESS)) {
- dev_dbg (&dev->intf->dev, "unlink fail %d\n", retval);
+ dev_err(&dev->intf->dev, "unlink fail %d\n", retval);
return retval;
}
@@ -1121,7 +1111,7 @@ static int unlink_simple (struct usbtest_dev *dev, int pipe, int len)
/*-------------------------------------------------------------------------*/
-static int verify_not_halted (int ep, struct urb *urb)
+static int verify_not_halted(struct usbtest_dev *tdev, int ep, struct urb *urb)
{
int retval;
u16 status;
@@ -1129,20 +1119,21 @@ static int verify_not_halted (int ep, struct urb *urb)
/* shouldn't look or act halted */
retval = usb_get_status (urb->dev, USB_RECIP_ENDPOINT, ep, &status);
if (retval < 0) {
- dbg ("ep %02x couldn't get no-halt status, %d", ep, retval);
+ ERROR(tdev, "ep %02x couldn't get no-halt status, %d\n",
+ ep, retval);
return retval;
}
if (status != 0) {
- dbg ("ep %02x bogus status: %04x != 0", ep, status);
+ ERROR(tdev, "ep %02x bogus status: %04x != 0\n", ep, status);
return -EINVAL;
}
- retval = simple_io (urb, 1, 0, 0, __func__);
+ retval = simple_io(tdev, urb, 1, 0, 0, __func__);
if (retval != 0)
return -EINVAL;
return 0;
}
-static int verify_halted (int ep, struct urb *urb)
+static int verify_halted(struct usbtest_dev *tdev, int ep, struct urb *urb)
{
int retval;
u16 status;
@@ -1150,29 +1141,30 @@ static int verify_halted (int ep, struct urb *urb)
/* should look and act halted */
retval = usb_get_status (urb->dev, USB_RECIP_ENDPOINT, ep, &status);
if (retval < 0) {
- dbg ("ep %02x couldn't get halt status, %d", ep, retval);
+ ERROR(tdev, "ep %02x couldn't get halt status, %d\n",
+ ep, retval);
return retval;
}
le16_to_cpus(&status);
if (status != 1) {
- dbg ("ep %02x bogus status: %04x != 1", ep, status);
+ ERROR(tdev, "ep %02x bogus status: %04x != 1\n", ep, status);
return -EINVAL;
}
- retval = simple_io (urb, 1, 0, -EPIPE, __func__);
+ retval = simple_io(tdev, urb, 1, 0, -EPIPE, __func__);
if (retval != -EPIPE)
return -EINVAL;
- retval = simple_io (urb, 1, 0, -EPIPE, "verify_still_halted");
+ retval = simple_io(tdev, urb, 1, 0, -EPIPE, "verify_still_halted");
if (retval != -EPIPE)
return -EINVAL;
return 0;
}
-static int test_halt (int ep, struct urb *urb)
+static int test_halt(struct usbtest_dev *tdev, int ep, struct urb *urb)
{
int retval;
/* shouldn't look or act halted now */
- retval = verify_not_halted (ep, urb);
+ retval = verify_not_halted(tdev, ep, urb);
if (retval < 0)
return retval;
@@ -1182,20 +1174,20 @@ static int test_halt (int ep, struct urb *urb)
USB_ENDPOINT_HALT, ep,
NULL, 0, USB_CTRL_SET_TIMEOUT);
if (retval < 0) {
- dbg ("ep %02x couldn't set halt, %d", ep, retval);
+ ERROR(tdev, "ep %02x couldn't set halt, %d\n", ep, retval);
return retval;
}
- retval = verify_halted (ep, urb);
+ retval = verify_halted(tdev, ep, urb);
if (retval < 0)
return retval;
/* clear halt (tests API + protocol), verify it worked */
retval = usb_clear_halt (urb->dev, urb->pipe);
if (retval < 0) {
- dbg ("ep %02x couldn't clear halt, %d", ep, retval);
+ ERROR(tdev, "ep %02x couldn't clear halt, %d\n", ep, retval);
return retval;
}
- retval = verify_not_halted (ep, urb);
+ retval = verify_not_halted(tdev, ep, urb);
if (retval < 0)
return retval;
@@ -1217,7 +1209,7 @@ static int halt_simple (struct usbtest_dev *dev)
if (dev->in_pipe) {
ep = usb_pipeendpoint (dev->in_pipe) | USB_DIR_IN;
urb->pipe = dev->in_pipe;
- retval = test_halt (ep, urb);
+ retval = test_halt(dev, ep, urb);
if (retval < 0)
goto done;
}
@@ -1225,7 +1217,7 @@ static int halt_simple (struct usbtest_dev *dev)
if (dev->out_pipe) {
ep = usb_pipeendpoint (dev->out_pipe);
urb->pipe = dev->out_pipe;
- retval = test_halt (ep, urb);
+ retval = test_halt(dev, ep, urb);
}
done:
simple_free_urb (urb);
@@ -1275,7 +1267,7 @@ static int ctrl_out (struct usbtest_dev *dev,
if (retval != len) {
what = "write";
if (retval >= 0) {
- INFO(dev, "ctrl_out, wlen %d (expected %d)\n",
+ ERROR(dev, "ctrl_out, wlen %d (expected %d)\n",
retval, len);
retval = -EBADMSG;
}
@@ -1289,7 +1281,7 @@ static int ctrl_out (struct usbtest_dev *dev,
if (retval != len) {
what = "read";
if (retval >= 0) {
- INFO(dev, "ctrl_out, rlen %d (expected %d)\n",
+ ERROR(dev, "ctrl_out, rlen %d (expected %d)\n",
retval, len);
retval = -EBADMSG;
}
@@ -1299,7 +1291,7 @@ static int ctrl_out (struct usbtest_dev *dev,
/* fail if we can't verify */
for (j = 0; j < len; j++) {
if (buf [j] != (u8) (i + j)) {
- INFO (dev, "ctrl_out, byte %d is %d not %d\n",
+ ERROR(dev, "ctrl_out, byte %d is %d not %d\n",
j, buf [j], (u8) i + j);
retval = -EBADMSG;
break;
@@ -1321,7 +1313,7 @@ static int ctrl_out (struct usbtest_dev *dev,
}
if (retval < 0)
- INFO (dev, "ctrl_out %s failed, code %d, count %d\n",
+ ERROR (dev, "ctrl_out %s failed, code %d, count %d\n",
what, retval, i);
kfree (buf);
@@ -1366,7 +1358,7 @@ static void iso_callback (struct urb *urb)
case 0:
goto done;
default:
- dev_dbg (&ctx->dev->intf->dev,
+ dev_err(&ctx->dev->intf->dev,
"iso resubmit err %d\n",
status);
/* FALLTHROUGH */
@@ -1381,7 +1373,7 @@ static void iso_callback (struct urb *urb)
ctx->pending--;
if (ctx->pending == 0) {
if (ctx->errors)
- dev_dbg (&ctx->dev->intf->dev,
+ dev_err(&ctx->dev->intf->dev,
"iso test, %lu errors out of %lu\n",
ctx->errors, ctx->packet_count);
complete (&ctx->done);
@@ -1458,7 +1450,7 @@ test_iso_queue (struct usbtest_dev *dev, struct usbtest_param *param,
memset (urbs, 0, sizeof urbs);
udev = testdev_to_usbdev (dev);
- dev_dbg (&dev->intf->dev,
+ dev_info(&dev->intf->dev,
"... iso period %d %sframes, wMaxPacket %04x\n",
1 << (desc->bInterval - 1),
(udev->speed == USB_SPEED_HIGH) ? "micro" : "",
@@ -1475,7 +1467,7 @@ test_iso_queue (struct usbtest_dev *dev, struct usbtest_param *param,
urbs [i]->context = &context;
}
packets *= param->iterations;
- dev_dbg (&dev->intf->dev,
+ dev_info(&dev->intf->dev,
"... total %lu msec (%lu packets)\n",
(packets * (1 << (desc->bInterval - 1)))
/ ((udev->speed == USB_SPEED_HIGH) ? 8 : 1),
@@ -1537,6 +1529,13 @@ fail:
* except indirectly by consuming USB bandwidth and CPU resources for test
* threads and request completion. But the only way to know that for sure
* is to test when HC queues are in use by many devices.
+ *
+ * WARNING: Because usbfs grabs udev->dev.sem before calling this ioctl(),
+ * it locks out usbcore in certain code paths. Notably, if you disconnect
+ * the device-under-test, khubd will wait block forever waiting for the
+ * ioctl to complete ... so that usb_disconnect() can abort the pending
+ * urbs and then call usbtest_disconnect(). To abort a test, you're best
+ * off just killing the userspace task and waiting for it to exit.
*/
static int
@@ -1575,7 +1574,7 @@ usbtest_ioctl (struct usb_interface *intf, unsigned int code, void *buf)
* altsettings; force a default so most tests don't need to check.
*/
if (dev->info->alt >= 0) {
- int res;
+ int res;
if (intf->altsetting->desc.bInterfaceNumber) {
mutex_unlock(&dev->lock);
@@ -1604,7 +1603,7 @@ usbtest_ioctl (struct usb_interface *intf, unsigned int code, void *buf)
switch (param->test_num) {
case 0:
- dev_dbg (&intf->dev, "TEST 0: NOP\n");
+ dev_info(&intf->dev, "TEST 0: NOP\n");
retval = 0;
break;
@@ -1612,7 +1611,7 @@ usbtest_ioctl (struct usb_interface *intf, unsigned int code, void *buf)
case 1:
if (dev->out_pipe == 0)
break;
- dev_dbg (&intf->dev,
+ dev_info(&intf->dev,
"TEST 1: write %d bytes %u times\n",
param->length, param->iterations);
urb = simple_alloc_urb (udev, dev->out_pipe, param->length);
@@ -1621,13 +1620,13 @@ usbtest_ioctl (struct usb_interface *intf, unsigned int code, void *buf)
break;
}
// FIRMWARE: bulk sink (maybe accepts short writes)
- retval = simple_io (urb, param->iterations, 0, 0, "test1");
+ retval = simple_io(dev, urb, param->iterations, 0, 0, "test1");
simple_free_urb (urb);
break;
case 2:
if (dev->in_pipe == 0)
break;
- dev_dbg (&intf->dev,
+ dev_info(&intf->dev,
"TEST 2: read %d bytes %u times\n",
param->length, param->iterations);
urb = simple_alloc_urb (udev, dev->in_pipe, param->length);
@@ -1636,13 +1635,13 @@ usbtest_ioctl (struct usb_interface *intf, unsigned int code, void *buf)
break;
}
// FIRMWARE: bulk source (maybe generates short writes)
- retval = simple_io (urb, param->iterations, 0, 0, "test2");
+ retval = simple_io(dev, urb, param->iterations, 0, 0, "test2");
simple_free_urb (urb);
break;
case 3:
if (dev->out_pipe == 0 || param->vary == 0)
break;
- dev_dbg (&intf->dev,
+ dev_info(&intf->dev,
"TEST 3: write/%d 0..%d bytes %u times\n",
param->vary, param->length, param->iterations);
urb = simple_alloc_urb (udev, dev->out_pipe, param->length);
@@ -1651,14 +1650,14 @@ usbtest_ioctl (struct usb_interface *intf, unsigned int code, void *buf)
break;
}
// FIRMWARE: bulk sink (maybe accepts short writes)
- retval = simple_io (urb, param->iterations, param->vary,
+ retval = simple_io(dev, urb, param->iterations, param->vary,
0, "test3");
simple_free_urb (urb);
break;
case 4:
if (dev->in_pipe == 0 || param->vary == 0)
break;
- dev_dbg (&intf->dev,
+ dev_info(&intf->dev,
"TEST 4: read/%d 0..%d bytes %u times\n",
param->vary, param->length, param->iterations);
urb = simple_alloc_urb (udev, dev->in_pipe, param->length);
@@ -1667,7 +1666,7 @@ usbtest_ioctl (struct usb_interface *intf, unsigned int code, void *buf)
break;
}
// FIRMWARE: bulk source (maybe generates short writes)
- retval = simple_io (urb, param->iterations, param->vary,
+ retval = simple_io(dev, urb, param->iterations, param->vary,
0, "test4");
simple_free_urb (urb);
break;
@@ -1676,7 +1675,7 @@ usbtest_ioctl (struct usb_interface *intf, unsigned int code, void *buf)
case 5:
if (dev->out_pipe == 0 || param->sglen == 0)
break;
- dev_dbg (&intf->dev,
+ dev_info(&intf->dev,
"TEST 5: write %d sglists %d entries of %d bytes\n",
param->iterations,
param->sglen, param->length);
@@ -1686,7 +1685,7 @@ usbtest_ioctl (struct usb_interface *intf, unsigned int code, void *buf)
break;
}
// FIRMWARE: bulk sink (maybe accepts short writes)
- retval = perform_sglist (udev, param->iterations, dev->out_pipe,
+ retval = perform_sglist(dev, param->iterations, dev->out_pipe,
&req, sg, param->sglen);
free_sglist (sg, param->sglen);
break;
@@ -1694,7 +1693,7 @@ usbtest_ioctl (struct usb_interface *intf, unsigned int code, void *buf)
case 6:
if (dev->in_pipe == 0 || param->sglen == 0)
break;
- dev_dbg (&intf->dev,
+ dev_info(&intf->dev,
"TEST 6: read %d sglists %d entries of %d bytes\n",
param->iterations,
param->sglen, param->length);
@@ -1704,14 +1703,14 @@ usbtest_ioctl (struct usb_interface *intf, unsigned int code, void *buf)
break;
}
// FIRMWARE: bulk source (maybe generates short writes)
- retval = perform_sglist (udev, param->iterations, dev->in_pipe,
+ retval = perform_sglist(dev, param->iterations, dev->in_pipe,
&req, sg, param->sglen);
free_sglist (sg, param->sglen);
break;
case 7:
if (dev->out_pipe == 0 || param->sglen == 0 || param->vary == 0)
break;
- dev_dbg (&intf->dev,
+ dev_info(&intf->dev,
"TEST 7: write/%d %d sglists %d entries 0..%d bytes\n",
param->vary, param->iterations,
param->sglen, param->length);
@@ -1721,14 +1720,14 @@ usbtest_ioctl (struct usb_interface *intf, unsigned int code, void *buf)
break;
}
// FIRMWARE: bulk sink (maybe accepts short writes)
- retval = perform_sglist (udev, param->iterations, dev->out_pipe,
+ retval = perform_sglist(dev, param->iterations, dev->out_pipe,
&req, sg, param->sglen);
free_sglist (sg, param->sglen);
break;
case 8:
if (dev->in_pipe == 0 || param->sglen == 0 || param->vary == 0)
break;
- dev_dbg (&intf->dev,
+ dev_info(&intf->dev,
"TEST 8: read/%d %d sglists %d entries 0..%d bytes\n",
param->vary, param->iterations,
param->sglen, param->length);
@@ -1738,7 +1737,7 @@ usbtest_ioctl (struct usb_interface *intf, unsigned int code, void *buf)
break;
}
// FIRMWARE: bulk source (maybe generates short writes)
- retval = perform_sglist (udev, param->iterations, dev->in_pipe,
+ retval = perform_sglist(dev, param->iterations, dev->in_pipe,
&req, sg, param->sglen);
free_sglist (sg, param->sglen);
break;
@@ -1746,13 +1745,14 @@ usbtest_ioctl (struct usb_interface *intf, unsigned int code, void *buf)
/* non-queued sanity tests for control (chapter 9 subset) */
case 9:
retval = 0;
- dev_dbg (&intf->dev,
+ dev_info(&intf->dev,
"TEST 9: ch9 (subset) control tests, %d times\n",
param->iterations);
for (i = param->iterations; retval == 0 && i--; /* NOP */)
retval = ch9_postconfig (dev);
if (retval)
- dbg ("ch9 subset failed, iterations left %d", i);
+ dev_err(&intf->dev, "ch9 subset failed, "
+ "iterations left %d\n", i);
break;
/* queued control messaging */
@@ -1760,7 +1760,7 @@ usbtest_ioctl (struct usb_interface *intf, unsigned int code, void *buf)
if (param->sglen == 0)
break;
retval = 0;
- dev_dbg (&intf->dev,
+ dev_info(&intf->dev,
"TEST 10: queue %d control calls, %d times\n",
param->sglen,
param->iterations);
@@ -1772,26 +1772,26 @@ usbtest_ioctl (struct usb_interface *intf, unsigned int code, void *buf)
if (dev->in_pipe == 0 || !param->length)
break;
retval = 0;
- dev_dbg (&intf->dev, "TEST 11: unlink %d reads of %d\n",
+ dev_info(&intf->dev, "TEST 11: unlink %d reads of %d\n",
param->iterations, param->length);
for (i = param->iterations; retval == 0 && i--; /* NOP */)
retval = unlink_simple (dev, dev->in_pipe,
param->length);
if (retval)
- dev_dbg (&intf->dev, "unlink reads failed %d, "
+ dev_err(&intf->dev, "unlink reads failed %d, "
"iterations left %d\n", retval, i);
break;
case 12:
if (dev->out_pipe == 0 || !param->length)
break;
retval = 0;
- dev_dbg (&intf->dev, "TEST 12: unlink %d writes of %d\n",
+ dev_info(&intf->dev, "TEST 12: unlink %d writes of %d\n",
param->iterations, param->length);
for (i = param->iterations; retval == 0 && i--; /* NOP */)
retval = unlink_simple (dev, dev->out_pipe,
param->length);
if (retval)
- dev_dbg (&intf->dev, "unlink writes failed %d, "
+ dev_err(&intf->dev, "unlink writes failed %d, "
"iterations left %d\n", retval, i);
break;
@@ -1800,24 +1800,24 @@ usbtest_ioctl (struct usb_interface *intf, unsigned int code, void *buf)
if (dev->out_pipe == 0 && dev->in_pipe == 0)
break;
retval = 0;
- dev_dbg (&intf->dev, "TEST 13: set/clear %d halts\n",
+ dev_info(&intf->dev, "TEST 13: set/clear %d halts\n",
param->iterations);
for (i = param->iterations; retval == 0 && i--; /* NOP */)
retval = halt_simple (dev);
-
+
if (retval)
- DBG (dev, "halts failed, iterations left %d\n", i);
+ ERROR(dev, "halts failed, iterations left %d\n", i);
break;
/* control write tests */
case 14:
if (!dev->info->ctrl_out)
break;
- dev_dbg (&intf->dev, "TEST 14: %d ep0out, %d..%d vary %d\n",
+ dev_info(&intf->dev, "TEST 14: %d ep0out, %d..%d vary %d\n",
param->iterations,
realworld ? 1 : 0, param->length,
param->vary);
- retval = ctrl_out (dev, param->iterations,
+ retval = ctrl_out(dev, param->iterations,
param->length, param->vary);
break;
@@ -1825,7 +1825,7 @@ usbtest_ioctl (struct usb_interface *intf, unsigned int code, void *buf)
case 15:
if (dev->out_iso_pipe == 0 || param->sglen == 0)
break;
- dev_dbg (&intf->dev,
+ dev_info(&intf->dev,
"TEST 15: write %d iso, %d entries of %d bytes\n",
param->iterations,
param->sglen, param->length);
@@ -1838,7 +1838,7 @@ usbtest_ioctl (struct usb_interface *intf, unsigned int code, void *buf)
case 16:
if (dev->in_iso_pipe == 0 || param->sglen == 0)
break;
- dev_dbg (&intf->dev,
+ dev_info(&intf->dev,
"TEST 16: read %d iso, %d entries of %d bytes\n",
param->iterations,
param->sglen, param->length);
@@ -1898,7 +1898,8 @@ usbtest_probe (struct usb_interface *intf, const struct usb_device_id *id)
return -ENODEV;
if (product && le16_to_cpu(udev->descriptor.idProduct) != (u16)product)
return -ENODEV;
- dbg ("matched module params, vend=0x%04x prod=0x%04x",
+ dev_info(&intf->dev, "matched module params, "
+ "vend=0x%04x prod=0x%04x\n",
le16_to_cpu(udev->descriptor.idVendor),
le16_to_cpu(udev->descriptor.idProduct));
}
@@ -1940,7 +1941,8 @@ usbtest_probe (struct usb_interface *intf, const struct usb_device_id *id)
status = get_endpoints (dev, intf);
if (status < 0) {
- dbg ("couldn't get endpoints, %d\n", status);
+ WARN(dev, "couldn't get endpoints, %d\n",
+ status);
return status;
}
/* may find bulk or ISO pipes */
@@ -2082,21 +2084,9 @@ static struct usbtest_info generic_info = {
};
#endif
-// FIXME remove this
-static struct usbtest_info hact_info = {
- .name = "FX2/hact",
- //.ep_in = 6,
- .ep_out = 2,
- .alt = -1,
-};
-
static struct usb_device_id id_table [] = {
- { USB_DEVICE (0x0547, 0x1002),
- .driver_info = (unsigned long) &hact_info,
- },
-
/*-------------------------------------------------------------*/
/* EZ-USB devices which download firmware to replace (or in our
@@ -2185,7 +2175,7 @@ static int __init usbtest_init (void)
{
#ifdef GENERIC
if (vendor)
- dbg ("params: vend=0x%04x prod=0x%04x", vendor, product);
+ pr_debug("params: vend=0x%04x prod=0x%04x\n", vendor, product);
#endif
return usb_register (&usbtest_driver);
}
diff --git a/drivers/usb/serial/aircable.c b/drivers/usb/serial/aircable.c
index 9b1bb347dc2d..db6f97a93c02 100644
--- a/drivers/usb/serial/aircable.c
+++ b/drivers/usb/serial/aircable.c
@@ -147,7 +147,7 @@ static void serial_buf_free(struct circ_buf *cb)
*/
static int serial_buf_data_avail(struct circ_buf *cb)
{
- return CIRC_CNT(cb->head,cb->tail,AIRCABLE_BUF_SIZE);
+ return CIRC_CNT(cb->head, cb->tail, AIRCABLE_BUF_SIZE);
}
/*
@@ -171,7 +171,7 @@ static int serial_buf_put(struct circ_buf *cb, const char *buf, int count)
cb->head = (cb->head + c) & (AIRCABLE_BUF_SIZE-1);
buf += c;
count -= c;
- ret= c;
+ ret = c;
}
return ret;
}
@@ -197,7 +197,7 @@ static int serial_buf_get(struct circ_buf *cb, char *buf, int count)
cb->tail = (cb->tail + c) & (AIRCABLE_BUF_SIZE-1);
buf += c;
count -= c;
- ret= c;
+ ret = c;
}
return ret;
}
@@ -208,7 +208,7 @@ static void aircable_send(struct usb_serial_port *port)
{
int count, result;
struct aircable_private *priv = usb_get_serial_port_data(port);
- unsigned char* buf;
+ unsigned char *buf;
__le16 *dbuf;
dbg("%s - port %d", __func__, port->number);
if (port->write_urb_busy)
@@ -229,7 +229,8 @@ static void aircable_send(struct usb_serial_port *port)
buf[1] = TX_HEADER_1;
dbuf = (__le16 *)&buf[2];
*dbuf = cpu_to_le16((u16)count);
- serial_buf_get(priv->tx_buf,buf + HCI_HEADER_LENGTH, MAX_HCI_FRAMESIZE);
+ serial_buf_get(priv->tx_buf, buf + HCI_HEADER_LENGTH,
+ MAX_HCI_FRAMESIZE);
memcpy(port->write_urb->transfer_buffer, buf,
count + HCI_HEADER_LENGTH);
@@ -261,7 +262,7 @@ static void aircable_read(struct work_struct *work)
struct tty_struct *tty;
unsigned char *data;
int count;
- if (priv->rx_flags & THROTTLED){
+ if (priv->rx_flags & THROTTLED) {
if (priv->rx_flags & ACTUALLY_THROTTLED)
schedule_work(&priv->rx_work);
return;
@@ -282,10 +283,10 @@ static void aircable_read(struct work_struct *work)
count = min(64, serial_buf_data_avail(priv->rx_buf));
if (count <= 0)
- return; //We have finished sending everything.
+ return; /* We have finished sending everything. */
tty_prepare_flip_string(tty, &data, count);
- if (!data){
+ if (!data) {
err("%s- kzalloc(%d) failed.", __func__, count);
return;
}
@@ -304,9 +305,10 @@ static void aircable_read(struct work_struct *work)
static int aircable_probe(struct usb_serial *serial,
const struct usb_device_id *id)
{
- struct usb_host_interface *iface_desc = serial->interface->cur_altsetting;
+ struct usb_host_interface *iface_desc = serial->interface->
+ cur_altsetting;
struct usb_endpoint_descriptor *endpoint;
- int num_bulk_out=0;
+ int num_bulk_out = 0;
int i;
for (i = 0; i < iface_desc->desc.bNumEndpoints; i++) {
@@ -325,13 +327,13 @@ static int aircable_probe(struct usb_serial *serial,
return 0;
}
-static int aircable_attach (struct usb_serial *serial)
+static int aircable_attach(struct usb_serial *serial)
{
struct usb_serial_port *port = serial->port[0];
struct aircable_private *priv;
priv = kzalloc(sizeof(struct aircable_private), GFP_KERNEL);
- if (!priv){
+ if (!priv) {
err("%s- kmalloc(%Zd) failed.", __func__,
sizeof(struct aircable_private));
return -ENOMEM;
@@ -392,7 +394,7 @@ static int aircable_write(struct usb_serial_port *port,
usb_serial_debug_data(debug, &port->dev, __func__, count, source);
- if (!count){
+ if (!count) {
dbg("%s - write request of 0 bytes", __func__);
return count;
}
@@ -418,31 +420,31 @@ static void aircable_write_bulk_callback(struct urb *urb)
/* This has been taken from cypress_m8.c cypress_write_int_callback */
switch (status) {
- case 0:
- /* success */
- break;
- case -ECONNRESET:
- case -ENOENT:
- case -ESHUTDOWN:
- /* this urb is terminated, clean up */
- dbg("%s - urb shutting down with status: %d",
- __func__, status);
- port->write_urb_busy = 0;
+ case 0:
+ /* success */
+ break;
+ case -ECONNRESET:
+ case -ENOENT:
+ case -ESHUTDOWN:
+ /* this urb is terminated, clean up */
+ dbg("%s - urb shutting down with status: %d",
+ __func__, status);
+ port->write_urb_busy = 0;
+ return;
+ default:
+ /* error in the urb, so we have to resubmit it */
+ dbg("%s - Overflow in write", __func__);
+ dbg("%s - nonzero write bulk status received: %d",
+ __func__, status);
+ port->write_urb->transfer_buffer_length = 1;
+ port->write_urb->dev = port->serial->dev;
+ result = usb_submit_urb(port->write_urb, GFP_ATOMIC);
+ if (result)
+ dev_err(&urb->dev->dev,
+ "%s - failed resubmitting write urb, error %d\n",
+ __func__, result);
+ else
return;
- default:
- /* error in the urb, so we have to resubmit it */
- dbg("%s - Overflow in write", __func__);
- dbg("%s - nonzero write bulk status received: %d",
- __func__, status);
- port->write_urb->transfer_buffer_length = 1;
- port->write_urb->dev = port->serial->dev;
- result = usb_submit_urb(port->write_urb, GFP_ATOMIC);
- if (result)
- dev_err(&urb->dev->dev,
- "%s - failed resubmitting write urb, error %d\n",
- __func__, result);
- else
- return;
}
port->write_urb_busy = 0;
@@ -472,11 +474,11 @@ static void aircable_read_bulk_callback(struct urb *urb)
dbg("%s - caught -EPROTO, resubmitting the urb",
__func__);
usb_fill_bulk_urb(port->read_urb, port->serial->dev,
- usb_rcvbulkpipe(port->serial->dev,
- port->bulk_in_endpointAddress),
- port->read_urb->transfer_buffer,
- port->read_urb->transfer_buffer_length,
- aircable_read_bulk_callback, port);
+ usb_rcvbulkpipe(port->serial->dev,
+ port->bulk_in_endpointAddress),
+ port->read_urb->transfer_buffer,
+ port->read_urb->transfer_buffer_length,
+ aircable_read_bulk_callback, port);
result = usb_submit_urb(urb, GFP_ATOMIC);
if (result)
@@ -490,7 +492,7 @@ static void aircable_read_bulk_callback(struct urb *urb)
}
usb_serial_debug_data(debug, &port->dev, __func__,
- urb->actual_length,urb->transfer_buffer);
+ urb->actual_length, urb->transfer_buffer);
tty = port->tty;
if (tty && urb->actual_length) {
@@ -507,9 +509,9 @@ static void aircable_read_bulk_callback(struct urb *urb)
no_packages = urb->actual_length / (HCI_COMPLETE_FRAME);
if (urb->actual_length % HCI_COMPLETE_FRAME != 0)
- no_packages+=1;
+ no_packages++;
- for (i = 0; i < no_packages ;i++) {
+ for (i = 0; i < no_packages; i++) {
if (remaining > (HCI_COMPLETE_FRAME))
package_length = HCI_COMPLETE_FRAME;
else
@@ -529,7 +531,7 @@ static void aircable_read_bulk_callback(struct urb *urb)
if (port->open_count) {
usb_fill_bulk_urb(port->read_urb, port->serial->dev,
usb_rcvbulkpipe(port->serial->dev,
- port->bulk_in_endpointAddress),
+ port->bulk_in_endpointAddress),
port->read_urb->transfer_buffer,
port->read_urb->transfer_buffer_length,
aircable_read_bulk_callback, port);
@@ -602,7 +604,7 @@ static struct usb_serial_driver aircable_device = {
.unthrottle = aircable_unthrottle,
};
-static int __init aircable_init (void)
+static int __init aircable_init(void)
{
int retval;
retval = usb_serial_register(&aircable_device);
@@ -619,7 +621,7 @@ failed_usb_register:
return retval;
}
-static void __exit aircable_exit (void)
+static void __exit aircable_exit(void)
{
usb_deregister(&aircable_driver);
usb_serial_deregister(&aircable_device);
diff --git a/drivers/usb/serial/airprime.c b/drivers/usb/serial/airprime.c
index 725b6b94c274..0798c14ce787 100644
--- a/drivers/usb/serial/airprime.c
+++ b/drivers/usb/serial/airprime.c
@@ -68,8 +68,9 @@ static int airprime_send_setup(struct usb_serial_port *port)
val |= 0x02;
return usb_control_msg(serial->dev,
- usb_rcvctrlpipe(serial->dev, 0),
- 0x22,0x21,val,0,NULL,0,USB_CTRL_SET_TIMEOUT);
+ usb_rcvctrlpipe(serial->dev, 0),
+ 0x22, 0x21, val, 0, NULL, 0,
+ USB_CTRL_SET_TIMEOUT);
}
return 0;
@@ -90,17 +91,19 @@ static void airprime_read_bulk_callback(struct urb *urb)
__func__, status);
return;
}
- usb_serial_debug_data(debug, &port->dev, __func__, urb->actual_length, data);
+ usb_serial_debug_data(debug, &port->dev, __func__,
+ urb->actual_length, data);
tty = port->tty;
if (tty && urb->actual_length) {
- tty_insert_flip_string (tty, data, urb->actual_length);
- tty_flip_buffer_push (tty);
+ tty_insert_flip_string(tty, data, urb->actual_length);
+ tty_flip_buffer_push(tty);
}
- result = usb_submit_urb (urb, GFP_ATOMIC);
+ result = usb_submit_urb(urb, GFP_ATOMIC);
if (result)
- dev_err(&port->dev, "%s - failed resubmitting read urb, error %d\n",
+ dev_err(&port->dev,
+ "%s - failed resubmitting read urb, error %d\n",
__func__, result);
return;
}
@@ -115,7 +118,7 @@ static void airprime_write_bulk_callback(struct urb *urb)
dbg("%s - port %d", __func__, port->number);
/* free up the transfer buffer, as usb_free_urb() does not do this */
- kfree (urb->transfer_buffer);
+ kfree(urb->transfer_buffer);
if (status)
dbg("%s - nonzero write bulk status received: %d",
@@ -171,7 +174,7 @@ static int airprime_open(struct usb_serial_port *port, struct file *filp)
}
usb_fill_bulk_urb(urb, serial->dev,
usb_rcvbulkpipe(serial->dev,
- port->bulk_out_endpointAddress),
+ port->bulk_out_endpointAddress),
buffer, buffer_size,
airprime_read_bulk_callback, port);
result = usb_submit_urb(urb, GFP_KERNEL);
@@ -183,7 +186,8 @@ static int airprime_open(struct usb_serial_port *port, struct file *filp)
__func__, i, port->number, result);
goto errout;
}
- /* remember this urb so we can kill it when the port is closed */
+ /* remember this urb so we can kill it when the
+ port is closed */
priv->read_urbp[i] = urb;
}
@@ -192,22 +196,22 @@ static int airprime_open(struct usb_serial_port *port, struct file *filp)
goto out;
errout:
- /* some error happened, cancel any submitted urbs and clean up anything that
- got allocated successfully */
+ /* some error happened, cancel any submitted urbs and clean up
+ anything that got allocated successfully */
while (i-- != 0) {
urb = priv->read_urbp[i];
buffer = urb->transfer_buffer;
- usb_kill_urb (urb);
- usb_free_urb (urb);
- kfree (buffer);
+ usb_kill_urb(urb);
+ usb_free_urb(urb);
+ kfree(buffer);
}
out:
return result;
}
-static void airprime_close(struct usb_serial_port *port, struct file * filp)
+static void airprime_close(struct usb_serial_port *port, struct file *filp)
{
struct airprime_private *priv = usb_get_serial_port_data(port);
int i;
@@ -220,16 +224,16 @@ static void airprime_close(struct usb_serial_port *port, struct file * filp)
mutex_lock(&port->serial->disc_mutex);
if (!port->serial->disconnected)
airprime_send_setup(port);
- mutex_lock(&port->serial->disc_mutex);
+ mutex_unlock(&port->serial->disc_mutex);
for (i = 0; i < NUM_READ_URBS; ++i) {
- usb_kill_urb (priv->read_urbp[i]);
- kfree (priv->read_urbp[i]->transfer_buffer);
- usb_free_urb (priv->read_urbp[i]);
+ usb_kill_urb(priv->read_urbp[i]);
+ kfree(priv->read_urbp[i]->transfer_buffer);
+ usb_free_urb(priv->read_urbp[i]);
}
/* free up private structure */
- kfree (priv);
+ kfree(priv);
usb_set_serial_port_data(port, NULL);
}
@@ -259,10 +263,10 @@ static int airprime_write(struct usb_serial_port *port,
urb = usb_alloc_urb(0, GFP_ATOMIC);
if (!urb) {
dev_err(&port->dev, "no more free urbs\n");
- kfree (buffer);
+ kfree(buffer);
return -ENOMEM;
}
- memcpy (buffer, buf, count);
+ memcpy(buffer, buf, count);
usb_serial_debug_data(debug, &port->dev, __func__, count, buffer);
@@ -279,7 +283,7 @@ static int airprime_write(struct usb_serial_port *port,
"%s - usb_submit_urb(write bulk) failed with status = %d\n",
__func__, status);
count = status;
- kfree (buffer);
+ kfree(buffer);
} else {
spin_lock_irqsave(&priv->lock, flags);
++priv->outstanding_urbs;
@@ -287,7 +291,7 @@ static int airprime_write(struct usb_serial_port *port,
}
/* we are done with this urb, so let the host driver
* really free it when it is finished with it */
- usb_free_urb (urb);
+ usb_free_urb(urb);
return count;
}
@@ -315,8 +319,10 @@ static int __init airprime_init(void)
{
int retval;
- airprime_device.num_ports =
- (endpoints > 0 && endpoints <= MAX_BULK_EPS) ? endpoints : NUM_BULK_EPS;
+ airprime_device.num_ports = endpoints;
+ if (endpoints < 0 || endpoints >= MAX_BULK_EPS)
+ airprime_device.num_ports = NUM_BULK_EPS;
+
retval = usb_serial_register(&airprime_device);
if (retval)
return retval;
@@ -341,6 +347,7 @@ MODULE_LICENSE("GPL");
module_param(debug, bool, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(debug, "Debug enabled");
module_param(buffer_size, int, 0);
-MODULE_PARM_DESC(buffer_size, "Size of the transfer buffers in bytes (default 4096)");
+MODULE_PARM_DESC(buffer_size,
+ "Size of the transfer buffers in bytes (default 4096)");
module_param(endpoints, int, 0);
MODULE_PARM_DESC(endpoints, "Number of bulk EPs to configure (default 3)");
diff --git a/drivers/usb/serial/ark3116.c b/drivers/usb/serial/ark3116.c
index 599ab2e548a7..77895c8f8f31 100644
--- a/drivers/usb/serial/ark3116.c
+++ b/drivers/usb/serial/ark3116.c
@@ -24,7 +24,7 @@
#include <linux/usb.h>
#include <linux/usb/serial.h>
#include <linux/serial.h>
-#include <asm/uaccess.h>
+#include <linux/uaccess.h>
static int debug;
@@ -246,29 +246,29 @@ static void ark3116_set_termios(struct usb_serial_port *port,
baud = tty_get_baud_rate(port->tty);
switch (baud) {
- case 75:
- case 150:
- case 300:
- case 600:
- case 1200:
- case 1800:
- case 2400:
- case 4800:
- case 9600:
- case 19200:
- case 38400:
- case 57600:
- case 115200:
- case 230400:
- case 460800:
- /* Report the resulting rate back to the caller */
- tty_encode_baud_rate(port->tty, baud, baud);
- break;
- /* set 9600 as default (if given baudrate is invalid for example) */
- default:
- tty_encode_baud_rate(port->tty, 9600, 9600);
- case 0:
- baud = 9600;
+ case 75:
+ case 150:
+ case 300:
+ case 600:
+ case 1200:
+ case 1800:
+ case 2400:
+ case 4800:
+ case 9600:
+ case 19200:
+ case 38400:
+ case 57600:
+ case 115200:
+ case 230400:
+ case 460800:
+ /* Report the resulting rate back to the caller */
+ tty_encode_baud_rate(port->tty, baud, baud);
+ break;
+ /* set 9600 as default (if given baudrate is invalid for example) */
+ default:
+ tty_encode_baud_rate(port->tty, 9600, 9600);
+ case 0:
+ baud = 9600;
}
/*
@@ -380,19 +380,19 @@ static int ark3116_ioctl(struct usb_serial_port *port, struct file *file,
switch (cmd) {
case TIOCGSERIAL:
/* XXX: Some of these values are probably wrong. */
- memset(&serstruct, 0, sizeof (serstruct));
+ memset(&serstruct, 0, sizeof(serstruct));
serstruct.type = PORT_16654;
serstruct.line = port->serial->minor;
serstruct.port = port->number;
serstruct.custom_divisor = 0;
serstruct.baud_base = 460800;
- if (copy_to_user(user_arg, &serstruct, sizeof (serstruct)))
+ if (copy_to_user(user_arg, &serstruct, sizeof(serstruct)))
return -EFAULT;
return 0;
case TIOCSSERIAL:
- if (copy_from_user(&serstruct, user_arg, sizeof (serstruct)))
+ if (copy_from_user(&serstruct, user_arg, sizeof(serstruct)))
return -EFAULT;
return 0;
default:
diff --git a/drivers/usb/serial/ch341.c b/drivers/usb/serial/ch341.c
index d947d955bceb..ba28fdc9ccd2 100644
--- a/drivers/usb/serial/ch341.c
+++ b/drivers/usb/serial/ch341.c
@@ -130,7 +130,7 @@ static int ch341_get_status(struct usb_device *dev)
return -ENOMEM;
r = ch341_control_in(dev, 0x95, 0x0706, 0, buffer, size);
- if ( r < 0)
+ if (r < 0)
goto out;
/* Not having the datasheet for the CH341, we ignore the bytes returned
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index c7329f43d9c9..5b349ece7247 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -133,6 +133,14 @@ static struct ftdi_sio_quirk ftdi_HE_TIRA1_quirk = {
static struct usb_device_id id_table_combined [] = {
{ USB_DEVICE(FTDI_VID, FTDI_AMC232_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_CANUSB_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_0_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_1_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_2_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_3_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_4_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_5_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_6_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_7_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ACTZWAVE_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_IRTRANS_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_IPLUS_PID) },
diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h
index 6da539ede0ee..504edf8c3a3f 100644
--- a/drivers/usb/serial/ftdi_sio.h
+++ b/drivers/usb/serial/ftdi_sio.h
@@ -40,6 +40,17 @@
/* AlphaMicro Components AMC-232USB01 device */
#define FTDI_AMC232_PID 0xFF00 /* Product Id */
+/* SCS HF Radio Modems PID's (http://www.scs-ptc.com) */
+/* the VID is the standard ftdi vid (FTDI_VID) */
+#define FTDI_SCS_DEVICE_0_PID 0xD010 /* SCS PTC-IIusb */
+#define FTDI_SCS_DEVICE_1_PID 0xD011 /* SCS Tracker / DSP TNC */
+#define FTDI_SCS_DEVICE_2_PID 0xD012
+#define FTDI_SCS_DEVICE_3_PID 0xD013
+#define FTDI_SCS_DEVICE_4_PID 0xD014
+#define FTDI_SCS_DEVICE_5_PID 0xD015
+#define FTDI_SCS_DEVICE_6_PID 0xD016
+#define FTDI_SCS_DEVICE_7_PID 0xD017
+
/* ACT Solutions HomePro ZWave interface (http://www.act-solutions.com/HomePro.htm) */
#define FTDI_ACTZWAVE_PID 0xF2D0
diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c
index 6bcb82d3911a..78f2f6db494d 100644
--- a/drivers/usb/serial/mos7840.c
+++ b/drivers/usb/serial/mos7840.c
@@ -1713,7 +1713,7 @@ static int mos7840_tiocmset(struct usb_serial_port *port, struct file *file,
{
struct moschip_port *mos7840_port;
unsigned int mcr;
- unsigned int status;
+ int status;
dbg("%s - port %d", __func__, port->number);
@@ -1740,11 +1740,10 @@ static int mos7840_tiocmset(struct usb_serial_port *port, struct file *file,
mos7840_port->shadowMCR = mcr;
- status = 0;
status = mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER, mcr);
if (status < 0) {
dbg("setting MODEM_CONTROL_REGISTER Failed\n");
- return -1;
+ return status;
}
return 0;
diff --git a/drivers/usb/storage/Kconfig b/drivers/usb/storage/Kconfig
index 0f6d234d699b..3d9249632ae1 100644
--- a/drivers/usb/storage/Kconfig
+++ b/drivers/usb/storage/Kconfig
@@ -123,7 +123,8 @@ config USB_STORAGE_ALAUDA
config USB_STORAGE_ONETOUCH
bool "Support OneTouch Button on Maxtor Hard Drives"
- depends on USB_STORAGE && INPUT_EVDEV
+ depends on USB_STORAGE
+ depends on INPUT=y || INPUT=USB_STORAGE
help
Say Y here to include additional code to support the Maxtor OneTouch
USB hard drive's onetouch button.
diff --git a/drivers/usb/storage/libusual.c b/drivers/usb/storage/libusual.c
index a28d49122e7a..d617e8ae6b00 100644
--- a/drivers/usb/storage/libusual.c
+++ b/drivers/usb/storage/libusual.c
@@ -135,7 +135,7 @@ static int usu_probe(struct usb_interface *intf,
stat[type].fls |= USU_MOD_FL_THREAD;
spin_unlock_irqrestore(&usu_lock, flags);
- task = kthread_run(usu_probe_thread, (void*)type, "libusual_%d", type);
+ task = kthread_run(usu_probe_thread, (void*)type, "libusual_%ld", type);
if (IS_ERR(task)) {
rc = PTR_ERR(task);
printk(KERN_WARNING "libusual: "
diff --git a/drivers/usb/storage/onetouch.c b/drivers/usb/storage/onetouch.c
index dfd42fe9e5f0..98b89ea9e312 100644
--- a/drivers/usb/storage/onetouch.c
+++ b/drivers/usb/storage/onetouch.c
@@ -38,7 +38,7 @@
#include "onetouch.h"
#include "debug.h"
-void onetouch_release_input(void *onetouch_);
+static void onetouch_release_input(void *onetouch_);
struct usb_onetouch {
char name[128];
@@ -223,7 +223,7 @@ int onetouch_connect_input(struct us_data *ss)
return error;
}
-void onetouch_release_input(void *onetouch_)
+static void onetouch_release_input(void *onetouch_)
{
struct usb_onetouch *onetouch = (struct usb_onetouch *) onetouch_;
diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
index 732bf52a775e..a0ed889230aa 100644
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -44,7 +44,8 @@
* running with this patch.
* Send your submission to either Phil Dibowitz <phil@ipom.com> or
* Alan Stern <stern@rowland.harvard.edu>, and don't forget to CC: the
- * USB development list <linux-usb-devel@lists.sourceforge.net>.
+ * USB development list <linux-usb@vger.kernel.org> and the USB storage list
+ * <usb-storage@lists.one-eyed-alien.net>
*/
/* patch submitted by Vivian Bregier <Vivian.Bregier@imag.fr>
@@ -557,6 +558,13 @@ UNUSUAL_DEV( 0x04e6, 0x1010, 0x0000, 0x9999,
US_FL_SINGLE_LUN),
#endif
+/* Reported by Dmitry Khlystov <adminimus@gmail.com> */
+UNUSUAL_DEV( 0x04e8, 0x507c, 0x0220, 0x0220,
+ "Samsung",
+ "YP-U3",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ US_FL_MAX_SECTORS_64),
+
/* Reported by Bob Sass <rls@vectordb.com> -- only rev 1.33 tested */
UNUSUAL_DEV( 0x050d, 0x0115, 0x0133, 0x0133,
"Belkin",
@@ -1200,6 +1208,17 @@ UNUSUAL_DEV( 0x084d, 0x0011, 0x0110, 0x0110,
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_BULK32),
+/* Andrew Lunn <andrew@lunn.ch>
+ * PanDigital Digital Picture Frame. Does not like ALLOW_MEDIUM_REMOVAL
+ * on LUN 4.
+ * Note: Vend:Prod clash with "Ltd Maxell WS30 Slim Digital Camera"
+*/
+UNUSUAL_DEV( 0x0851, 0x1543, 0x0200, 0x0200,
+ "PanDigital",
+ "Photo Frame",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ US_FL_NOT_LOCKABLE),
+
/* Submitted by Jan De Luyck <lkml@kcore.org> */
UNUSUAL_DEV( 0x08bd, 0x1100, 0x0000, 0x0000,
"CITIZEN",
@@ -1342,6 +1361,13 @@ UNUSUAL_DEV( 0x0d96, 0x410a, 0x0001, 0xffff,
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_FIX_INQUIRY),
+/* Reported by Rohan Hart <rohan.hart17@gmail.com> */
+UNUSUAL_DEV( 0x2770, 0x915d, 0x0010, 0x0010,
+ "INTOVA",
+ "Pixtreme",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ US_FL_FIX_CAPACITY ),
+
/*
* Entry for Jenoptik JD 5200z3
*
diff --git a/drivers/usb/storage/usb.c b/drivers/usb/storage/usb.c
index a856effad3bd..e268aacb773a 100644
--- a/drivers/usb/storage/usb.c
+++ b/drivers/usb/storage/usb.c
@@ -539,7 +539,8 @@ static int get_device_info(struct us_data *us, const struct usb_device_id *id)
" has %s in unusual_devs.h (kernel"
" %s)\n"
" Please send a copy of this message to "
- "<linux-usb-devel@lists.sourceforge.net>\n",
+ "<linux-usb@vger.kernel.org> and "
+ "<usb-storage@lists.one-eyed-alien.net>\n",
le16_to_cpu(ddesc->idVendor),
le16_to_cpu(ddesc->idProduct),
le16_to_cpu(ddesc->bcdDevice),
diff --git a/drivers/virtio/virtio.c b/drivers/virtio/virtio.c
index b535483bc556..13866789b356 100644
--- a/drivers/virtio/virtio.c
+++ b/drivers/virtio/virtio.c
@@ -80,19 +80,51 @@ static void add_status(struct virtio_device *dev, unsigned status)
dev->config->set_status(dev, dev->config->get_status(dev) | status);
}
+void virtio_check_driver_offered_feature(const struct virtio_device *vdev,
+ unsigned int fbit)
+{
+ unsigned int i;
+ struct virtio_driver *drv = container_of(vdev->dev.driver,
+ struct virtio_driver, driver);
+
+ for (i = 0; i < drv->feature_table_size; i++)
+ if (drv->feature_table[i] == fbit)
+ return;
+ BUG();
+}
+EXPORT_SYMBOL_GPL(virtio_check_driver_offered_feature);
+
static int virtio_dev_probe(struct device *_d)
{
- int err;
+ int err, i;
struct virtio_device *dev = container_of(_d,struct virtio_device,dev);
struct virtio_driver *drv = container_of(dev->dev.driver,
struct virtio_driver, driver);
+ u32 device_features;
+ /* We have a driver! */
add_status(dev, VIRTIO_CONFIG_S_DRIVER);
+
+ /* Figure out what features the device supports. */
+ device_features = dev->config->get_features(dev);
+
+ /* Features supported by both device and driver into dev->features. */
+ memset(dev->features, 0, sizeof(dev->features));
+ for (i = 0; i < drv->feature_table_size; i++) {
+ unsigned int f = drv->feature_table[i];
+ BUG_ON(f >= 32);
+ if (device_features & (1 << f))
+ set_bit(f, dev->features);
+ }
+
err = drv->probe(dev);
if (err)
add_status(dev, VIRTIO_CONFIG_S_FAILED);
- else
+ else {
add_status(dev, VIRTIO_CONFIG_S_DRIVER_OK);
+ /* They should never have set feature bits beyond 32 */
+ dev->config->set_features(dev, dev->features[0]);
+ }
return err;
}
@@ -114,6 +146,8 @@ static int virtio_dev_remove(struct device *_d)
int register_virtio_driver(struct virtio_driver *driver)
{
+ /* Catch this early. */
+ BUG_ON(driver->feature_table_size && !driver->feature_table);
driver->driver.bus = &virtio_bus;
driver->driver.probe = virtio_dev_probe;
driver->driver.remove = virtio_dev_remove;
diff --git a/drivers/virtio/virtio_balloon.c b/drivers/virtio/virtio_balloon.c
index 0b3efc31ee6d..bfef604160d1 100644
--- a/drivers/virtio/virtio_balloon.c
+++ b/drivers/virtio/virtio_balloon.c
@@ -155,9 +155,9 @@ static void virtballoon_changed(struct virtio_device *vdev)
static inline s64 towards_target(struct virtio_balloon *vb)
{
u32 v;
- __virtio_config_val(vb->vdev,
- offsetof(struct virtio_balloon_config, num_pages),
- &v);
+ vb->vdev->config->get(vb->vdev,
+ offsetof(struct virtio_balloon_config, num_pages),
+ &v, sizeof(v));
return v - vb->num_pages;
}
@@ -227,7 +227,7 @@ static int virtballoon_probe(struct virtio_device *vdev)
}
vb->tell_host_first
- = vdev->config->feature(vdev, VIRTIO_BALLOON_F_MUST_TELL_HOST);
+ = virtio_has_feature(vdev, VIRTIO_BALLOON_F_MUST_TELL_HOST);
return 0;
@@ -259,7 +259,11 @@ static void virtballoon_remove(struct virtio_device *vdev)
kfree(vb);
}
+static unsigned int features[] = { VIRTIO_BALLOON_F_MUST_TELL_HOST };
+
static struct virtio_driver virtio_balloon = {
+ .feature_table = features,
+ .feature_table_size = ARRAY_SIZE(features),
.driver.name = KBUILD_MODNAME,
.driver.owner = THIS_MODULE,
.id_table = id_table,
diff --git a/drivers/virtio/virtio_pci.c b/drivers/virtio/virtio_pci.c
index c0df924766a7..27e9fc9117cd 100644
--- a/drivers/virtio/virtio_pci.c
+++ b/drivers/virtio/virtio_pci.c
@@ -87,23 +87,22 @@ static struct virtio_pci_device *to_vp_device(struct virtio_device *vdev)
return container_of(vdev, struct virtio_pci_device, vdev);
}
-/* virtio config->feature() implementation */
-static bool vp_feature(struct virtio_device *vdev, unsigned bit)
+/* virtio config->get_features() implementation */
+static u32 vp_get_features(struct virtio_device *vdev)
+{
+ struct virtio_pci_device *vp_dev = to_vp_device(vdev);
+
+ /* When someone needs more than 32 feature bits, we'll need to
+ * steal a bit to indicate that the rest are somewhere else. */
+ return ioread32(vp_dev->ioaddr + VIRTIO_PCI_HOST_FEATURES);
+}
+
+/* virtio config->set_features() implementation */
+static void vp_set_features(struct virtio_device *vdev, u32 features)
{
struct virtio_pci_device *vp_dev = to_vp_device(vdev);
- u32 mask;
-
- /* Since this function is supposed to have the side effect of
- * enabling a queried feature, we simulate that by doing a read
- * from the host feature bitmask and then writing to the guest
- * feature bitmask */
- mask = ioread32(vp_dev->ioaddr + VIRTIO_PCI_HOST_FEATURES);
- if (mask & (1 << bit)) {
- mask |= (1 << bit);
- iowrite32(mask, vp_dev->ioaddr + VIRTIO_PCI_GUEST_FEATURES);
- }
- return !!(mask & (1 << bit));
+ iowrite32(features, vp_dev->ioaddr + VIRTIO_PCI_GUEST_FEATURES);
}
/* virtio config->get() implementation */
@@ -145,14 +144,14 @@ static void vp_set_status(struct virtio_device *vdev, u8 status)
struct virtio_pci_device *vp_dev = to_vp_device(vdev);
/* We should never be setting status to 0. */
BUG_ON(status == 0);
- return iowrite8(status, vp_dev->ioaddr + VIRTIO_PCI_STATUS);
+ iowrite8(status, vp_dev->ioaddr + VIRTIO_PCI_STATUS);
}
static void vp_reset(struct virtio_device *vdev)
{
struct virtio_pci_device *vp_dev = to_vp_device(vdev);
/* 0 status means a reset. */
- return iowrite8(0, vp_dev->ioaddr + VIRTIO_PCI_STATUS);
+ iowrite8(0, vp_dev->ioaddr + VIRTIO_PCI_STATUS);
}
/* the notify function used when creating a virt queue */
@@ -293,7 +292,6 @@ static void vp_del_vq(struct virtqueue *vq)
}
static struct virtio_config_ops virtio_pci_config_ops = {
- .feature = vp_feature,
.get = vp_get,
.set = vp_set,
.get_status = vp_get_status,
@@ -301,6 +299,8 @@ static struct virtio_config_ops virtio_pci_config_ops = {
.reset = vp_reset,
.find_vq = vp_find_vq,
.del_vq = vp_del_vq,
+ .get_features = vp_get_features,
+ .set_features = vp_set_features,
};
/* the PCI probing function */
diff --git a/drivers/virtio/virtio_ring.c b/drivers/virtio/virtio_ring.c
index c2fa5c630813..937a49d6772c 100644
--- a/drivers/virtio/virtio_ring.c
+++ b/drivers/virtio/virtio_ring.c
@@ -184,6 +184,11 @@ static void *vring_get_buf(struct virtqueue *_vq, unsigned int *len)
START_USE(vq);
+ if (unlikely(vq->broken)) {
+ END_USE(vq);
+ return NULL;
+ }
+
if (!more_used(vq)) {
pr_debug("No more buffers in queue\n");
END_USE(vq);