summaryrefslogtreecommitdiff
path: root/drivers
diff options
context:
space:
mode:
Diffstat (limited to 'drivers')
-rw-r--r--drivers/acpi/osl.c4
-rw-r--r--drivers/acpi/power.c1
-rw-r--r--drivers/ata/ata_piix.c2
-rw-r--r--drivers/block/cciss.c3
-rw-r--r--drivers/char/agp/generic.c2
-rw-r--r--drivers/char/bsr.c2
-rw-r--r--drivers/firewire/ohci.c2
-rw-r--r--drivers/gpu/drm/drm_bufs.c2
-rw-r--r--drivers/gpu/drm/i915/intel_display.c4
-rw-r--r--drivers/gpu/drm/radeon/atombios.h4
-rw-r--r--drivers/infiniband/hw/ipath/ipath_iba6110.c2
-rw-r--r--drivers/infiniband/hw/ipath/ipath_iba6120.c4
-rw-r--r--drivers/infiniband/hw/ipath/ipath_iba7220.c2
-rw-r--r--drivers/isdn/hardware/mISDN/hfcmulti.c2
-rw-r--r--drivers/isdn/hisax/hfc4s8s_l1.c2
-rw-r--r--drivers/macintosh/windfarm_pm81.c2
-rw-r--r--drivers/media/dvb/dvb-usb/friio-fe.c2
-rw-r--r--drivers/message/i2o/i2o_config.c16
-rw-r--r--drivers/misc/eeprom/eeprom.c36
-rw-r--r--drivers/misc/eeprom/eeprom_93cx6.c39
-rw-r--r--drivers/misc/eeprom/max6875.c52
-rw-r--r--drivers/net/bnx2x_hsi.h2
-rw-r--r--drivers/net/ps3_gelic_wireless.c2
-rw-r--r--drivers/net/smsc911x.c4
-rw-r--r--drivers/pci/hotplug/cpqphp_core.c2
-rw-r--r--drivers/pci/pci.c2
-rw-r--r--drivers/pci/pci.h2
-rw-r--r--drivers/ps3/ps3-sys-manager.c2
-rw-r--r--drivers/regulator/core.c2
-rw-r--r--drivers/rtc/rtc-rx8581.c6
-rw-r--r--drivers/rtc/rtc-stk17ta8.c4
-rw-r--r--drivers/s390/char/sclp_cpi_sys.c2
-rw-r--r--drivers/scsi/bfa/include/defs/bfa_defs_cee.h2
-rw-r--r--drivers/scsi/bfa/include/defs/bfa_defs_status.h4
-rw-r--r--drivers/spi/spi_mpc8xxx.c2
-rw-r--r--drivers/staging/vt6655/rxtx.c14
-rw-r--r--drivers/staging/vt6656/rxtx.c6
-rw-r--r--drivers/usb/host/ehci-omap.c2
-rw-r--r--drivers/usb/wusbcore/wa-xfer.c2
-rw-r--r--drivers/video/cobalt_lcdfb.c2
-rw-r--r--drivers/virtio/virtio_pci.c2
-rw-r--r--drivers/vlynq/Kconfig2
42 files changed, 118 insertions, 135 deletions
diff --git a/drivers/acpi/osl.c b/drivers/acpi/osl.c
index 7594f65800cf..4bc1c4178f50 100644
--- a/drivers/acpi/osl.c
+++ b/drivers/acpi/osl.c
@@ -1406,7 +1406,7 @@ acpi_os_invalidate_address(
switch (space_id) {
case ACPI_ADR_SPACE_SYSTEM_IO:
case ACPI_ADR_SPACE_SYSTEM_MEMORY:
- /* Only interference checks against SystemIO and SytemMemory
+ /* Only interference checks against SystemIO and SystemMemory
are needed */
res.start = address;
res.end = address + length - 1;
@@ -1458,7 +1458,7 @@ acpi_os_validate_address (
switch (space_id) {
case ACPI_ADR_SPACE_SYSTEM_IO:
case ACPI_ADR_SPACE_SYSTEM_MEMORY:
- /* Only interference checks against SystemIO and SytemMemory
+ /* Only interference checks against SystemIO and SystemMemory
are needed */
res = kzalloc(sizeof(struct acpi_res_list), GFP_KERNEL);
if (!res)
diff --git a/drivers/acpi/power.c b/drivers/acpi/power.c
index ddc76787b842..f74d3b31e5c9 100644
--- a/drivers/acpi/power.c
+++ b/drivers/acpi/power.c
@@ -172,7 +172,6 @@ static int acpi_power_get_list_state(struct acpi_handle_list *list, int *state)
return -EINVAL;
/* The state of the list is 'on' IFF all resources are 'on'. */
- /* */
for (i = 0; i < list->count; i++) {
/*
diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c
index 83bc49fac9bb..ec52fc618763 100644
--- a/drivers/ata/ata_piix.c
+++ b/drivers/ata/ata_piix.c
@@ -43,7 +43,7 @@
* driver the list of errata that are relevant is below, going back to
* PIIX4. Older device documentation is now a bit tricky to find.
*
- * The chipsets all follow very much the same design. The orginal Triton
+ * The chipsets all follow very much the same design. The original Triton
* series chipsets do _not_ support independant device timings, but this
* is fixed in Triton II. With the odd mobile exception the chips then
* change little except in gaining more modes until SATA arrives. This
diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c
index eb5ff0531cfb..51ceaee98f9f 100644
--- a/drivers/block/cciss.c
+++ b/drivers/block/cciss.c
@@ -1588,7 +1588,6 @@ static int cciss_ioctl(struct block_device *bdev, fmode_t mode,
c->Request = ioc->Request;
if (ioc->buf_size > 0) {
- int i;
for (i = 0; i < sg_used; i++) {
temp64.val =
pci_map_single(host->pdev, buff[i],
@@ -2434,7 +2433,7 @@ static int deregister_disk(ctlr_info_t *h, int drv_index,
/* if it was the last disk, find the new hightest lun */
if (clear_all && recalculate_highest_lun) {
- int i, newhighest = -1;
+ int newhighest = -1;
for (i = 0; i <= h->highest_lun; i++) {
/* if the disk has size > 0, it is available */
if (h->drv[i] && h->drv[i]->heads)
diff --git a/drivers/char/agp/generic.c b/drivers/char/agp/generic.c
index fb86708e47ed..4b51982fd23a 100644
--- a/drivers/char/agp/generic.c
+++ b/drivers/char/agp/generic.c
@@ -1214,7 +1214,7 @@ struct agp_memory *agp_generic_alloc_user(size_t page_count, int type)
return NULL;
for (i = 0; i < page_count; i++)
- new->pages[i] = 0;
+ new->pages[i] = NULL;
new->page_count = 0;
new->type = type;
new->num_scratch_pages = pages;
diff --git a/drivers/char/bsr.c b/drivers/char/bsr.c
index 7fef305774de..89d871ef8c2f 100644
--- a/drivers/char/bsr.c
+++ b/drivers/char/bsr.c
@@ -253,7 +253,7 @@ static int bsr_add_node(struct device_node *bn)
cur->bsr_device = device_create(bsr_class, NULL, cur->bsr_dev,
cur, cur->bsr_name);
- if (!cur->bsr_device) {
+ if (IS_ERR(cur->bsr_device)) {
printk(KERN_ERR "device_create failed for %s\n",
cur->bsr_name);
cdev_del(&cur->bsr_cdev);
diff --git a/drivers/firewire/ohci.c b/drivers/firewire/ohci.c
index 94b16e0340ae..a3b083a7403a 100644
--- a/drivers/firewire/ohci.c
+++ b/drivers/firewire/ohci.c
@@ -1351,7 +1351,7 @@ static void bus_reset_tasklet(unsigned long data)
* was set up before this reset, the old one is now no longer
* in use and we can free it. Update the config rom pointers
* to point to the current config rom and clear the
- * next_config_rom pointer so a new udpate can take place.
+ * next_config_rom pointer so a new update can take place.
*/
if (ohci->next_config_rom != NULL) {
diff --git a/drivers/gpu/drm/drm_bufs.c b/drivers/gpu/drm/drm_bufs.c
index f7ba82ebf65a..2092e7bb788f 100644
--- a/drivers/gpu/drm/drm_bufs.c
+++ b/drivers/gpu/drm/drm_bufs.c
@@ -961,7 +961,7 @@ int drm_addbufs_pci(struct drm_device * dev, struct drm_buf_desc * request)
dma->buflist[i + dma->buf_count] = &entry->buflist[i];
}
- /* No allocations failed, so now we can replace the orginal pagelist
+ /* No allocations failed, so now we can replace the original pagelist
* with the new one.
*/
if (dma->page_count) {
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index c7502b6b1600..f27e3703a716 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -905,9 +905,9 @@ intel_g4x_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc,
memset(best_clock, 0, sizeof(*best_clock));
max_n = limit->n.max;
- /* based on hardware requriment prefer smaller n to precision */
+ /* based on hardware requirement, prefer smaller n to precision */
for (clock.n = limit->n.min; clock.n <= max_n; clock.n++) {
- /* based on hardware requirment prefere larger m1,m2 */
+ /* based on hardware requirement, prefere larger m1,m2 */
for (clock.m1 = limit->m1.max;
clock.m1 >= limit->m1.min; clock.m1--) {
for (clock.m2 = limit->m2.max;
diff --git a/drivers/gpu/drm/radeon/atombios.h b/drivers/gpu/drm/radeon/atombios.h
index 27e2c715be11..5319d9e2f7ba 100644
--- a/drivers/gpu/drm/radeon/atombios.h
+++ b/drivers/gpu/drm/radeon/atombios.h
@@ -3780,7 +3780,7 @@ typedef struct _ATOM_ASIC_SS_ASSIGNMENT
UCHAR ucReserved[2];
}ATOM_ASIC_SS_ASSIGNMENT;
-//Define ucClockIndication, SW uses the IDs below to search if the SS is requried/enabled on a clock branch/signal type.
+//Define ucClockIndication, SW uses the IDs below to search if the SS is required/enabled on a clock branch/signal type.
//SS is not required or enabled if a match is not found.
#define ASIC_INTERNAL_MEMORY_SS 1
#define ASIC_INTERNAL_ENGINE_SS 2
@@ -5895,7 +5895,7 @@ typedef struct _ATOM_PPLIB_RS780_CLOCK_INFO
UCHAR ucPadding; // For proper alignment and size.
USHORT usVDDC; // For the 780, use: None, Low, High, Variable
UCHAR ucMaxHTLinkWidth; // From SBIOS - {2, 4, 8, 16}
- UCHAR ucMinHTLinkWidth; // From SBIOS - {2, 4, 8, 16}. Effective only if CDLW enabled. Minimum down stream width could be bigger as display BW requriement.
+ UCHAR ucMinHTLinkWidth; // From SBIOS - {2, 4, 8, 16}. Effective only if CDLW enabled. Minimum down stream width could be bigger as display BW requirement.
USHORT usHTLinkFreq; // See definition ATOM_PPLIB_RS780_HTLINKFREQ_xxx or in MHz(>=200).
ULONG ulFlags;
} ATOM_PPLIB_RS780_CLOCK_INFO;
diff --git a/drivers/infiniband/hw/ipath/ipath_iba6110.c b/drivers/infiniband/hw/ipath/ipath_iba6110.c
index 37d12e5efa49..1d7aea132a09 100644
--- a/drivers/infiniband/hw/ipath/ipath_iba6110.c
+++ b/drivers/infiniband/hw/ipath/ipath_iba6110.c
@@ -1474,7 +1474,7 @@ static void ipath_ht_quiet_serdes(struct ipath_devdata *dd)
/**
* ipath_pe_put_tid - write a TID in chip
* @dd: the infinipath device
- * @tidptr: pointer to the expected TID (in chip) to udpate
+ * @tidptr: pointer to the expected TID (in chip) to update
* @tidtype: RCVHQ_RCV_TYPE_EAGER (1) for eager, RCVHQ_RCV_TYPE_EXPECTED (0) for expected
* @pa: physical address of in memory buffer; ipath_tidinvalid if freeing
*
diff --git a/drivers/infiniband/hw/ipath/ipath_iba6120.c b/drivers/infiniband/hw/ipath/ipath_iba6120.c
index fbf8c5379ea8..4b4a30b0dabd 100644
--- a/drivers/infiniband/hw/ipath/ipath_iba6120.c
+++ b/drivers/infiniband/hw/ipath/ipath_iba6120.c
@@ -1328,7 +1328,7 @@ bail:
/**
* ipath_pe_put_tid - write a TID in chip
* @dd: the infinipath device
- * @tidptr: pointer to the expected TID (in chip) to udpate
+ * @tidptr: pointer to the expected TID (in chip) to update
* @tidtype: RCVHQ_RCV_TYPE_EAGER (1) for eager, RCVHQ_RCV_TYPE_EXPECTED (0) for expected
* @pa: physical address of in memory buffer; ipath_tidinvalid if freeing
*
@@ -1394,7 +1394,7 @@ static void ipath_pe_put_tid(struct ipath_devdata *dd, u64 __iomem *tidptr,
/**
* ipath_pe_put_tid_2 - write a TID in chip, Revision 2 or higher
* @dd: the infinipath device
- * @tidptr: pointer to the expected TID (in chip) to udpate
+ * @tidptr: pointer to the expected TID (in chip) to update
* @tidtype: RCVHQ_RCV_TYPE_EAGER (1) for eager, RCVHQ_RCV_TYPE_EXPECTED (0) for expected
* @pa: physical address of in memory buffer; ipath_tidinvalid if freeing
*
diff --git a/drivers/infiniband/hw/ipath/ipath_iba7220.c b/drivers/infiniband/hw/ipath/ipath_iba7220.c
index a805402dd4ae..34b778ed97fc 100644
--- a/drivers/infiniband/hw/ipath/ipath_iba7220.c
+++ b/drivers/infiniband/hw/ipath/ipath_iba7220.c
@@ -1738,7 +1738,7 @@ bail:
/**
* ipath_7220_put_tid - write a TID to the chip
* @dd: the infinipath device
- * @tidptr: pointer to the expected TID (in chip) to udpate
+ * @tidptr: pointer to the expected TID (in chip) to update
* @tidtype: 0 for eager, 1 for expected
* @pa: physical address of in memory buffer; ipath_tidinvalid if freeing
*
diff --git a/drivers/isdn/hardware/mISDN/hfcmulti.c b/drivers/isdn/hardware/mISDN/hfcmulti.c
index 75e71b5d9215..095ed76ebe80 100644
--- a/drivers/isdn/hardware/mISDN/hfcmulti.c
+++ b/drivers/isdn/hardware/mISDN/hfcmulti.c
@@ -117,7 +117,7 @@
* NOTE: only one mode value must be given for every card.
* -> See hfc_multi.h for HFC_IO_MODE_* values
* By default, the IO mode is pci memory IO (MEMIO).
- * Some cards requre specific IO mode, so it cannot be changed.
+ * Some cards require specific IO mode, so it cannot be changed.
* It may be usefull to set IO mode to register io (REGIO) to solve
* PCI bridge problems.
* If unsure, don't give this parameter.
diff --git a/drivers/isdn/hisax/hfc4s8s_l1.c b/drivers/isdn/hisax/hfc4s8s_l1.c
index 051b44e2556c..384d5118e325 100644
--- a/drivers/isdn/hisax/hfc4s8s_l1.c
+++ b/drivers/isdn/hisax/hfc4s8s_l1.c
@@ -310,7 +310,7 @@ wait_busy(hfc4s8s_hw * a)
/******************************************************/
/* function to read critical counter registers that */
-/* may be udpated by the chip during read */
+/* may be updated by the chip during read */
/******************************************************/
static u_char
Read_hfc8_stable(hfc4s8s_hw * hw, int reg)
diff --git a/drivers/macintosh/windfarm_pm81.c b/drivers/macintosh/windfarm_pm81.c
index 565d5b2adc95..129cda737880 100644
--- a/drivers/macintosh/windfarm_pm81.c
+++ b/drivers/macintosh/windfarm_pm81.c
@@ -188,7 +188,7 @@ struct wf_smu_sys_fans_state {
};
/*
- * Configs for SMU Sytem Fan control loop
+ * Configs for SMU System Fan control loop
*/
static struct wf_smu_sys_fans_param wf_smu_sys_all_params[] = {
/* Model ID 2 */
diff --git a/drivers/media/dvb/dvb-usb/friio-fe.c b/drivers/media/dvb/dvb-usb/friio-fe.c
index d14bd227b502..93c21ddd0b77 100644
--- a/drivers/media/dvb/dvb-usb/friio-fe.c
+++ b/drivers/media/dvb/dvb-usb/friio-fe.c
@@ -300,7 +300,7 @@ static int jdvbt90502_set_frontend(struct dvb_frontend *fe,
struct dvb_frontend_parameters *p)
{
/**
- * NOTE: ignore all the paramters except frequency.
+ * NOTE: ignore all the parameters except frequency.
* others should be fixed to the proper value for ISDB-T,
* but don't check here.
*/
diff --git a/drivers/message/i2o/i2o_config.c b/drivers/message/i2o/i2o_config.c
index 11073fa3d9f4..d33693c13368 100644
--- a/drivers/message/i2o/i2o_config.c
+++ b/drivers/message/i2o/i2o_config.c
@@ -314,22 +314,22 @@ static int i2o_cfg_swul(unsigned long arg)
int ret = 0;
if (copy_from_user(&kxfer, pxfer, sizeof(struct i2o_sw_xfer)))
- goto return_fault;
+ return -EFAULT;
if (get_user(swlen, kxfer.swlen) < 0)
- goto return_fault;
+ return -EFAULT;
if (get_user(maxfrag, kxfer.maxfrag) < 0)
- goto return_fault;
+ return -EFAULT;
if (get_user(curfrag, kxfer.curfrag) < 0)
- goto return_fault;
+ return -EFAULT;
if (curfrag == maxfrag)
fragsize = swlen - (maxfrag - 1) * 8192;
if (!kxfer.buf)
- goto return_fault;
+ return -EFAULT;
c = i2o_find_iop(kxfer.iop);
if (!c)
@@ -373,12 +373,8 @@ static int i2o_cfg_swul(unsigned long arg)
i2o_dma_free(&c->pdev->dev, &buffer);
- return_ret:
return ret;
- return_fault:
- ret = -EFAULT;
- goto return_ret;
-};
+}
static int i2o_cfg_swdel(unsigned long arg)
{
diff --git a/drivers/misc/eeprom/eeprom.c b/drivers/misc/eeprom/eeprom.c
index f939ebc2507c..e306a8cd2f96 100644
--- a/drivers/misc/eeprom/eeprom.c
+++ b/drivers/misc/eeprom/eeprom.c
@@ -1,24 +1,20 @@
/*
- Copyright (C) 1998, 1999 Frodo Looijaard <frodol@dds.nl> and
- Philip Edelbrock <phil@netroedge.com>
- Copyright (C) 2003 Greg Kroah-Hartman <greg@kroah.com>
- Copyright (C) 2003 IBM Corp.
- Copyright (C) 2004 Jean Delvare <khali@linux-fr.org>
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
+ * Copyright (C) 1998, 1999 Frodo Looijaard <frodol@dds.nl> and
+ * Philip Edelbrock <phil@netroedge.com>
+ * Copyright (C) 2003 Greg Kroah-Hartman <greg@kroah.com>
+ * Copyright (C) 2003 IBM Corp.
+ * Copyright (C) 2004 Jean Delvare <khali@linux-fr.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
#include <linux/kernel.h>
#include <linux/init.h>
diff --git a/drivers/misc/eeprom/eeprom_93cx6.c b/drivers/misc/eeprom/eeprom_93cx6.c
index 15b1780025c8..7b33de95c4bf 100644
--- a/drivers/misc/eeprom/eeprom_93cx6.c
+++ b/drivers/misc/eeprom/eeprom_93cx6.c
@@ -1,27 +1,20 @@
/*
- Copyright (C) 2004 - 2006 rt2x00 SourceForge Project
- <http://rt2x00.serialmonkey.com>
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the
- Free Software Foundation, Inc.,
- 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- */
-
-/*
- Module: eeprom_93cx6
- Abstract: EEPROM reader routines for 93cx6 chipsets.
- Supported chipsets: 93c46 & 93c66.
+ * Copyright (C) 2004 - 2006 rt2x00 SourceForge Project
+ * <http://rt2x00.serialmonkey.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Module: eeprom_93cx6
+ * Abstract: EEPROM reader routines for 93cx6 chipsets.
+ * Supported chipsets: 93c46 & 93c66.
*/
#include <linux/kernel.h>
diff --git a/drivers/misc/eeprom/max6875.c b/drivers/misc/eeprom/max6875.c
index 5a6b2bce8ad5..fe2909278507 100644
--- a/drivers/misc/eeprom/max6875.c
+++ b/drivers/misc/eeprom/max6875.c
@@ -1,30 +1,30 @@
/*
- max6875.c - driver for MAX6874/MAX6875
-
- Copyright (C) 2005 Ben Gardner <bgardner@wabtec.com>
-
- Based on eeprom.c
-
- The MAX6875 has a bank of registers and two banks of EEPROM.
- Address ranges are defined as follows:
- * 0x0000 - 0x0046 = configuration registers
- * 0x8000 - 0x8046 = configuration EEPROM
- * 0x8100 - 0x82FF = user EEPROM
-
- This driver makes the user EEPROM available for read.
-
- The registers & config EEPROM should be accessed via i2c-dev.
-
- The MAX6875 ignores the lowest address bit, so each chip responds to
- two addresses - 0x50/0x51 and 0x52/0x53.
-
- Note that the MAX6875 uses i2c_smbus_write_byte_data() to set the read
- address, so this driver is destructive if loaded for the wrong EEPROM chip.
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; version 2 of the License.
-*/
+ * max6875.c - driver for MAX6874/MAX6875
+ *
+ * Copyright (C) 2005 Ben Gardner <bgardner@wabtec.com>
+ *
+ * Based on eeprom.c
+ *
+ * The MAX6875 has a bank of registers and two banks of EEPROM.
+ * Address ranges are defined as follows:
+ * * 0x0000 - 0x0046 = configuration registers
+ * * 0x8000 - 0x8046 = configuration EEPROM
+ * * 0x8100 - 0x82FF = user EEPROM
+ *
+ * This driver makes the user EEPROM available for read.
+ *
+ * The registers & config EEPROM should be accessed via i2c-dev.
+ *
+ * The MAX6875 ignores the lowest address bit, so each chip responds to
+ * two addresses - 0x50/0x51 and 0x52/0x53.
+ *
+ * Note that the MAX6875 uses i2c_smbus_write_byte_data() to set the read
+ * address, so this driver is destructive if loaded for the wrong EEPROM chip.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ */
#include <linux/kernel.h>
#include <linux/init.h>
diff --git a/drivers/net/bnx2x_hsi.h b/drivers/net/bnx2x_hsi.h
index 760069345b11..fd1f29e0317d 100644
--- a/drivers/net/bnx2x_hsi.h
+++ b/drivers/net/bnx2x_hsi.h
@@ -683,7 +683,7 @@ struct drv_func_mb {
#define DRV_MSG_CODE_GET_MANUF_KEY 0x82000000
#define DRV_MSG_CODE_LOAD_L2B_PRAM 0x90000000
/*
- * The optic module verification commands requris bootcode
+ * The optic module verification commands require bootcode
* v5.0.6 or later
*/
#define DRV_MSG_CODE_VRFY_OPT_MDL 0xa0000000
diff --git a/drivers/net/ps3_gelic_wireless.c b/drivers/net/ps3_gelic_wireless.c
index f0be507e5324..369a8016b1ff 100644
--- a/drivers/net/ps3_gelic_wireless.c
+++ b/drivers/net/ps3_gelic_wireless.c
@@ -96,7 +96,7 @@ static inline int precise_ie(void)
* post_eurus_cmd helpers
*/
struct eurus_cmd_arg_info {
- int pre_arg; /* command requres arg1, arg2 at POST COMMAND */
+ int pre_arg; /* command requires arg1, arg2 at POST COMMAND */
int post_arg; /* command requires arg1, arg2 at GET_RESULT */
};
diff --git a/drivers/net/smsc911x.c b/drivers/net/smsc911x.c
index cbf520d38eac..ffbaa608e002 100644
--- a/drivers/net/smsc911x.c
+++ b/drivers/net/smsc911x.c
@@ -736,7 +736,7 @@ static void smsc911x_phy_adjust_link(struct net_device *dev)
SMSC_TRACE(HW, "configuring for carrier OK");
if ((pdata->gpio_orig_setting & GPIO_CFG_LED1_EN_) &&
(!pdata->using_extphy)) {
- /* Restore orginal GPIO configuration */
+ /* Restore original GPIO configuration */
pdata->gpio_setting = pdata->gpio_orig_setting;
smsc911x_reg_write(pdata, GPIO_CFG,
pdata->gpio_setting);
@@ -750,7 +750,7 @@ static void smsc911x_phy_adjust_link(struct net_device *dev)
if ((pdata->gpio_setting & GPIO_CFG_LED1_EN_) &&
(!pdata->using_extphy)) {
/* Force 10/100 LED off, after saving
- * orginal GPIO configuration */
+ * original GPIO configuration */
pdata->gpio_orig_setting = pdata->gpio_setting;
pdata->gpio_setting &= ~GPIO_CFG_LED1_EN_;
diff --git a/drivers/pci/hotplug/cpqphp_core.c b/drivers/pci/hotplug/cpqphp_core.c
index f184d1d2ecbe..6644337d63d6 100644
--- a/drivers/pci/hotplug/cpqphp_core.c
+++ b/drivers/pci/hotplug/cpqphp_core.c
@@ -848,7 +848,7 @@ static int cpqhpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
goto err_disable_device;
}
- /* Check for the proper subsytem ID's
+ /* Check for the proper subsystem ID's
* Intel uses a different SSID programming model than Compaq.
* For Intel, each SSID bit identifies a PHP capability.
* Also Intel HPC's may have RID=0.
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index 37499127c801..1df7c508814e 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -1503,7 +1503,7 @@ int pci_prepare_to_sleep(struct pci_dev *dev)
* pci_back_from_sleep - turn PCI device on during system-wide transition into working state
* @dev: Device to handle.
*
- * Disable device's sytem wake-up capability and put it into D0.
+ * Disable device's system wake-up capability and put it into D0.
*/
int pci_back_from_sleep(struct pci_dev *dev)
{
diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h
index 4eb10f48d270..f8077b3c8c8c 100644
--- a/drivers/pci/pci.h
+++ b/drivers/pci/pci.h
@@ -244,7 +244,7 @@ struct pci_ats {
int stu; /* Smallest Translation Unit */
int qdep; /* Invalidate Queue Depth */
int ref_cnt; /* Physical Function reference count */
- int is_enabled:1; /* Enable bit is set */
+ unsigned int is_enabled:1; /* Enable bit is set */
};
#ifdef CONFIG_PCI_IOV
diff --git a/drivers/ps3/ps3-sys-manager.c b/drivers/ps3/ps3-sys-manager.c
index 3cbaf1811bd0..d37c445f0eda 100644
--- a/drivers/ps3/ps3-sys-manager.c
+++ b/drivers/ps3/ps3-sys-manager.c
@@ -119,7 +119,7 @@ enum ps3_sys_manager_service_id {
* enum ps3_sys_manager_attr - Notification attribute (bit position mask).
* @PS3_SM_ATTR_POWER: Power button.
* @PS3_SM_ATTR_RESET: Reset button, not available on retail console.
- * @PS3_SM_ATTR_THERMAL: Sytem thermal alert.
+ * @PS3_SM_ATTR_THERMAL: System thermal alert.
* @PS3_SM_ATTR_CONTROLLER: Remote controller event.
* @PS3_SM_ATTR_ALL: Logical OR of all.
*
diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c
index 2b4e40d31190..51cf2bb37438 100644
--- a/drivers/regulator/core.c
+++ b/drivers/regulator/core.c
@@ -1540,7 +1540,7 @@ EXPORT_SYMBOL_GPL(regulator_count_voltages);
* Context: can sleep
*
* Returns a voltage that can be passed to @regulator_set_voltage(),
- * zero if this selector code can't be used on this sytem, or a
+ * zero if this selector code can't be used on this system, or a
* negative errno.
*/
int regulator_list_voltage(struct regulator *regulator, unsigned selector)
diff --git a/drivers/rtc/rtc-rx8581.c b/drivers/rtc/rtc-rx8581.c
index c9522f3bc21c..9718aaaa8215 100644
--- a/drivers/rtc/rtc-rx8581.c
+++ b/drivers/rtc/rtc-rx8581.c
@@ -1,8 +1,8 @@
/*
* An I2C driver for the Epson RX8581 RTC
*
- * Author: Martyn Welch <martyn.welch@gefanuc.com>
- * Copyright 2008 GE Fanuc Intelligent Platforms Embedded Systems, Inc.
+ * Author: Martyn Welch <martyn.welch@ge.com>
+ * Copyright 2008 GE Intelligent Platforms Embedded Systems, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -272,7 +272,7 @@ static void __exit rx8581_exit(void)
i2c_del_driver(&rx8581_driver);
}
-MODULE_AUTHOR("Martyn Welch <martyn.welch@gefanuc.com>");
+MODULE_AUTHOR("Martyn Welch <martyn.welch@ge.com>");
MODULE_DESCRIPTION("Epson RX-8581 RTC driver");
MODULE_LICENSE("GPL");
MODULE_VERSION(DRV_VERSION);
diff --git a/drivers/rtc/rtc-stk17ta8.c b/drivers/rtc/rtc-stk17ta8.c
index 875ba099e7a5..b53a00198dbe 100644
--- a/drivers/rtc/rtc-stk17ta8.c
+++ b/drivers/rtc/rtc-stk17ta8.c
@@ -1,7 +1,7 @@
/*
* A RTC driver for the Simtek STK17TA8
*
- * By Thomas Hommel <thomas.hommel@gefanuc.com>
+ * By Thomas Hommel <thomas.hommel@ge.com>
*
* Based on the DS1553 driver from
* Atsushi Nemoto <anemo@mba.ocn.ne.jp>
@@ -382,7 +382,7 @@ static __exit void stk17ta8_exit(void)
module_init(stk17ta8_init);
module_exit(stk17ta8_exit);
-MODULE_AUTHOR("Thomas Hommel <thomas.hommel@gefanuc.com>");
+MODULE_AUTHOR("Thomas Hommel <thomas.hommel@ge.com>");
MODULE_DESCRIPTION("Simtek STK17TA8 RTC driver");
MODULE_LICENSE("GPL");
MODULE_VERSION(DRV_VERSION);
diff --git a/drivers/s390/char/sclp_cpi_sys.c b/drivers/s390/char/sclp_cpi_sys.c
index 62c2647f37f4..4a51e3f09689 100644
--- a/drivers/s390/char/sclp_cpi_sys.c
+++ b/drivers/s390/char/sclp_cpi_sys.c
@@ -102,7 +102,7 @@ static struct sclp_req *cpi_prepare_req(void)
/* set system name */
set_data(evb->system_name, system_name);
- /* set sytem level */
+ /* set system level */
evb->system_level = system_level;
/* set sysplex name */
diff --git a/drivers/scsi/bfa/include/defs/bfa_defs_cee.h b/drivers/scsi/bfa/include/defs/bfa_defs_cee.h
index b0ac9ac15c5d..6eaf519eccdc 100644
--- a/drivers/scsi/bfa/include/defs/bfa_defs_cee.h
+++ b/drivers/scsi/bfa/include/defs/bfa_defs_cee.h
@@ -50,7 +50,7 @@ struct bfa_cee_lldp_str_s {
};
-/* LLDP paramters */
+/* LLDP parameters */
struct bfa_cee_lldp_cfg_s {
struct bfa_cee_lldp_str_s chassis_id;
struct bfa_cee_lldp_str_s port_id;
diff --git a/drivers/scsi/bfa/include/defs/bfa_defs_status.h b/drivers/scsi/bfa/include/defs/bfa_defs_status.h
index 4374494bd566..ec78b4cb121a 100644
--- a/drivers/scsi/bfa/include/defs/bfa_defs_status.h
+++ b/drivers/scsi/bfa/include/defs/bfa_defs_status.h
@@ -223,9 +223,9 @@ enum bfa_status {
BFA_STATUS_IM_PVID_NON_ZERO = 140, /* Port VLAN ID (PVID) is Set to
* Non-Zero Value */
BFA_STATUS_IM_INETCFG_LOCK_FAILED = 141, /* Acquiring Network
- * Subsytem Lock Failed.Please
+ * Subsystem Lock Failed.Please
* try after some time */
- BFA_STATUS_IM_GET_INETCFG_FAILED = 142, /* Acquiring Network Subsytem
+ BFA_STATUS_IM_GET_INETCFG_FAILED = 142, /* Acquiring Network Subsystem
* handle Failed. Please try
* after some time */
BFA_STATUS_IM_NOT_BOUND = 143, /* IM driver is not active */
diff --git a/drivers/spi/spi_mpc8xxx.c b/drivers/spi/spi_mpc8xxx.c
index 14d052316502..e324627d97a2 100644
--- a/drivers/spi/spi_mpc8xxx.c
+++ b/drivers/spi/spi_mpc8xxx.c
@@ -640,7 +640,7 @@ static int mpc8xxx_spi_setup(struct spi_device *spi)
}
mpc8xxx_spi = spi_master_get_devdata(spi->master);
- hw_mode = cs->hw_mode; /* Save orginal settings */
+ hw_mode = cs->hw_mode; /* Save original settings */
cs->hw_mode = mpc8xxx_spi_read_reg(&mpc8xxx_spi->base->mode);
/* mask out bits we are going to set */
cs->hw_mode &= ~(SPMODE_CP_BEGIN_EDGECLK | SPMODE_CI_INACTIVEHIGH
diff --git a/drivers/staging/vt6655/rxtx.c b/drivers/staging/vt6655/rxtx.c
index ed3070edcac1..4fcc4351e73f 100644
--- a/drivers/staging/vt6655/rxtx.c
+++ b/drivers/staging/vt6655/rxtx.c
@@ -25,19 +25,19 @@
* Date: May 20, 2003
*
* Functions:
- * s_vGenerateTxParameter - Generate tx dma requried parameter.
+ * s_vGenerateTxParameter - Generate tx dma required parameter.
* vGenerateMACHeader - Translate 802.3 to 802.11 header
- * cbGetFragCount - Caculate fragement number count
+ * cbGetFragCount - Caculate fragment number count
* csBeacon_xmit - beacon tx function
* csMgmt_xmit - management tx function
* s_cbFillTxBufHead - fulfill tx dma buffer header
* s_uGetDataDuration - get tx data required duration
* s_uFillDataHead- fulfill tx data duration header
- * s_uGetRTSCTSDuration- get rtx/cts requried duration
+ * s_uGetRTSCTSDuration- get rtx/cts required duration
* s_uGetRTSCTSRsvTime- get rts/cts reserved time
* s_uGetTxRsvTime- get frame reserved time
* s_vFillCTSHead- fulfill CTS ctl header
- * s_vFillFragParameter- Set fragement ctl parameter.
+ * s_vFillFragParameter- Set fragment ctl parameter.
* s_vFillRTSHead- fulfill RTS ctl header
* s_vFillTxKey- fulfill tx encrypt key
* s_vSWencryption- Software encrypt header
@@ -877,7 +877,7 @@ s_vFillRTSHead (
}
// Note: So far RTSHead dosen't appear in ATIM & Beacom DMA, so we don't need to take them into account.
- // Otherwise, we need to modified codes for them.
+ // Otherwise, we need to modify codes for them.
if (byPktType == PK_TYPE_11GB || byPktType == PK_TYPE_11GA) {
if (byFBOption == AUTO_FB_NONE) {
PSRTS_g pBuf = (PSRTS_g)pvRTS;
@@ -1133,7 +1133,7 @@ s_vFillCTSHead (
*
* Parameters:
* In:
- * pDevice - Pointer to adpater
+ * pDevice - Pointer to adapter
* pTxDataHead - Transmit Data Buffer
* pTxBufHead - pTxBufHead
* pvRrvTime - pvRrvTime
@@ -2252,7 +2252,7 @@ vGenerateFIFOHeader (
*
* Parameters:
* In:
- * pDevice - Pointer to adpater
+ * pDevice - Pointer to adapter
* dwTxBufferAddr - Transmit Buffer
* pPacket - Packet from upper layer
* cbPacketSize - Transmit Data Length
diff --git a/drivers/staging/vt6656/rxtx.c b/drivers/staging/vt6656/rxtx.c
index d9fa36c95230..a2ce6fad8ee5 100644
--- a/drivers/staging/vt6656/rxtx.c
+++ b/drivers/staging/vt6656/rxtx.c
@@ -25,17 +25,17 @@
* Date: May 20, 2003
*
* Functions:
- * s_vGenerateTxParameter - Generate tx dma requried parameter.
+ * s_vGenerateTxParameter - Generate tx dma required parameter.
* s_vGenerateMACHeader - Translate 802.3 to 802.11 header
* csBeacon_xmit - beacon tx function
* csMgmt_xmit - management tx function
* s_uGetDataDuration - get tx data required duration
* s_uFillDataHead- fulfill tx data duration header
- * s_uGetRTSCTSDuration- get rtx/cts requried duration
+ * s_uGetRTSCTSDuration- get rtx/cts required duration
* s_uGetRTSCTSRsvTime- get rts/cts reserved time
* s_uGetTxRsvTime- get frame reserved time
* s_vFillCTSHead- fulfill CTS ctl header
- * s_vFillFragParameter- Set fragement ctl parameter.
+ * s_vFillFragParameter- Set fragment ctl parameter.
* s_vFillRTSHead- fulfill RTS ctl header
* s_vFillTxKey- fulfill tx encrypt key
* s_vSWencryption- Software encrypt header
diff --git a/drivers/usb/host/ehci-omap.c b/drivers/usb/host/ehci-omap.c
index 40a858335035..0cd6c7795d90 100644
--- a/drivers/usb/host/ehci-omap.c
+++ b/drivers/usb/host/ehci-omap.c
@@ -181,7 +181,7 @@ struct ehci_hcd_omap {
void __iomem *ehci_base;
/* Regulators for USB PHYs.
- * Each PHY can have a seperate regulator.
+ * Each PHY can have a separate regulator.
*/
struct regulator *regulator[OMAP3_HS_USB_PORTS];
};
diff --git a/drivers/usb/wusbcore/wa-xfer.c b/drivers/usb/wusbcore/wa-xfer.c
index 112ef7e26f6b..608d61a105f6 100644
--- a/drivers/usb/wusbcore/wa-xfer.c
+++ b/drivers/usb/wusbcore/wa-xfer.c
@@ -76,7 +76,7 @@
* xfers-per-ripe, blocks-per-rpipe, rpipes-per-host), at the end
* we are going to have to rebuild all this based on an scheduler,
* to where we have a list of transactions to do and based on the
- * availability of the different requried components (blocks,
+ * availability of the different required components (blocks,
* rpipes, segment slots, etc), we go scheduling them. Painful.
*/
#include <linux/init.h>
diff --git a/drivers/video/cobalt_lcdfb.c b/drivers/video/cobalt_lcdfb.c
index 5eb61b5adfe8..42fe155aba0e 100644
--- a/drivers/video/cobalt_lcdfb.c
+++ b/drivers/video/cobalt_lcdfb.c
@@ -123,7 +123,7 @@ static void lcd_clear(struct fb_info *info)
lcd_write_control(info, LCD_RESET);
}
-static struct fb_fix_screeninfo cobalt_lcdfb_fix __initdata = {
+static struct fb_fix_screeninfo cobalt_lcdfb_fix __devinitdata = {
.id = "cobalt-lcd",
.type = FB_TYPE_TEXT,
.type_aux = FB_AUX_TEXT_MDA,
diff --git a/drivers/virtio/virtio_pci.c b/drivers/virtio/virtio_pci.c
index 24747aef1952..95896f387927 100644
--- a/drivers/virtio/virtio_pci.c
+++ b/drivers/virtio/virtio_pci.c
@@ -655,7 +655,7 @@ static int __devinit virtio_pci_probe(struct pci_dev *pci_dev,
/* we use the subsystem vendor/device id as the virtio vendor/device
* id. this allows us to use the same PCI vendor/device id for all
* virtio devices and to identify the particular virtio driver by
- * the subsytem ids */
+ * the subsystem ids */
vp_dev->vdev.id.vendor = pci_dev->subsystem_vendor;
vp_dev->vdev.id.device = pci_dev->subsystem_device;
diff --git a/drivers/vlynq/Kconfig b/drivers/vlynq/Kconfig
index a9efb1625321..d874b4f34136 100644
--- a/drivers/vlynq/Kconfig
+++ b/drivers/vlynq/Kconfig
@@ -1,8 +1,8 @@
menu "TI VLYNQ"
+ depends on AR7 && EXPERIMENTAL
config VLYNQ
bool "TI VLYNQ bus support"
- depends on AR7 && EXPERIMENTAL
help
Support for Texas Instruments(R) VLYNQ bus.
The VLYNQ bus is a high-speed, serial and packetized