diff options
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/message/fusion/lsi/fc_log.h | 89 | ||||
| -rw-r--r-- | drivers/message/fusion/lsi/mpi.h | 5 | ||||
| -rw-r--r-- | drivers/message/fusion/lsi/mpi_cnfg.h | 158 | ||||
| -rw-r--r-- | drivers/message/fusion/lsi/mpi_history.txt | 76 | ||||
| -rw-r--r-- | drivers/message/fusion/lsi/mpi_init.h | 4 | ||||
| -rw-r--r-- | drivers/message/fusion/lsi/mpi_ioc.h | 154 | ||||
| -rw-r--r-- | drivers/message/fusion/lsi/mpi_log_sas.h | 82 | ||||
| -rw-r--r-- | drivers/message/fusion/lsi/mpi_sas.h | 13 | ||||
| -rw-r--r-- | drivers/message/fusion/lsi/mpi_targ.h | 5 |
9 files changed, 413 insertions, 173 deletions
diff --git a/drivers/message/fusion/lsi/fc_log.h b/drivers/message/fusion/lsi/fc_log.h deleted file mode 100644 index dc98d46f9071..000000000000 --- a/drivers/message/fusion/lsi/fc_log.h +++ /dev/null @@ -1,89 +0,0 @@ -/* - * Copyright (c) 2000-2001 LSI Logic Corporation. All rights reserved. - * - * NAME: fc_log.h - * SUMMARY: MPI IocLogInfo definitions for the SYMFC9xx chips - * DESCRIPTION: Contains the enumerated list of values that may be returned - * in the IOCLogInfo field of a MPI Default Reply Message. - * - * CREATION DATE: 6/02/2000 - * ID: $Id: fc_log.h,v 4.6 2001/07/26 14:41:33 sschremm Exp $ - */ - - -/* - * MpiIocLogInfo_t enum - * - * These 32 bit values are used in the IOCLogInfo field of the MPI reply - * messages. - * The value is 0xabcccccc where - * a = The type of log info as per the MPI spec. Since these codes are - * all for Fibre Channel this value will always be 2. - * b = Specifies a subclass of the firmware where - * 0 = FCP Initiator - * 1 = FCP Target - * 2 = LAN - * 3 = MPI Message Layer - * 4 = FC Link - * 5 = Context Manager - * 6 = Invalid Field Offset - * 7 = State Change Info - * all others are reserved for future use - * c = A specific value within the subclass. - * - * NOTE: Any new values should be added to the end of each subclass so that the - * codes remain consistent across firmware releases. - */ -typedef enum _MpiIocLogInfoFc -{ - MPI_IOCLOGINFO_FC_INIT_BASE = 0x20000000, - MPI_IOCLOGINFO_FC_INIT_ERROR_OUT_OF_ORDER_FRAME = 0x20000001, /* received an out of order frame - unsupported */ - MPI_IOCLOGINFO_FC_INIT_ERROR_BAD_START_OF_FRAME = 0x20000002, /* Bad Rx Frame, bad start of frame primative */ - MPI_IOCLOGINFO_FC_INIT_ERROR_BAD_END_OF_FRAME = 0x20000003, /* Bad Rx Frame, bad end of frame primative */ - MPI_IOCLOGINFO_FC_INIT_ERROR_OVER_RUN = 0x20000004, /* Bad Rx Frame, overrun */ - MPI_IOCLOGINFO_FC_INIT_ERROR_RX_OTHER = 0x20000005, /* Other errors caught by IOC which require retries */ - MPI_IOCLOGINFO_FC_INIT_ERROR_SUBPROC_DEAD = 0x20000006, /* Main processor could not initialize sub-processor */ - MPI_IOCLOGINFO_FC_INIT_ERROR_RX_OVERRUN = 0x20000007, /* Scatter Gather overrun */ - MPI_IOCLOGINFO_FC_INIT_ERROR_RX_BAD_STATUS = 0x20000008, /* Receiver detected context mismatch via invalid header */ - MPI_IOCLOGINFO_FC_INIT_ERROR_RX_UNEXPECTED_FRAME= 0x20000009, /* CtxMgr detected unsupported frame type */ - MPI_IOCLOGINFO_FC_INIT_ERROR_LINK_FAILURE = 0x2000000A, /* Link failure occurred */ - MPI_IOCLOGINFO_FC_INIT_ERROR_TX_TIMEOUT = 0x2000000B, /* Transmitter timeout error */ - - MPI_IOCLOGINFO_FC_TARGET_BASE = 0x21000000, - MPI_IOCLOGINFO_FC_TARGET_NO_PDISC = 0x21000001, /* not sent because we are waiting for a PDISC from the initiator */ - MPI_IOCLOGINFO_FC_TARGET_NO_LOGIN = 0x21000002, /* not sent because we are not logged in to the remote node */ - MPI_IOCLOGINFO_FC_TARGET_DOAR_KILLED_BY_LIP = 0x21000003, /* Data Out, Auto Response, not sent due to a LIP */ - MPI_IOCLOGINFO_FC_TARGET_DIAR_KILLED_BY_LIP = 0x21000004, /* Data In, Auto Response, not sent due to a LIP */ - MPI_IOCLOGINFO_FC_TARGET_DIAR_MISSING_DATA = 0x21000005, /* Data In, Auto Response, missing data frames */ - MPI_IOCLOGINFO_FC_TARGET_DONR_KILLED_BY_LIP = 0x21000006, /* Data Out, No Response, not sent due to a LIP */ - MPI_IOCLOGINFO_FC_TARGET_WRSP_KILLED_BY_LIP = 0x21000007, /* Auto-response after a write not sent due to a LIP */ - MPI_IOCLOGINFO_FC_TARGET_DINR_KILLED_BY_LIP = 0x21000008, /* Data In, No Response, not completed due to a LIP */ - MPI_IOCLOGINFO_FC_TARGET_DINR_MISSING_DATA = 0x21000009, /* Data In, No Response, missing data frames */ - MPI_IOCLOGINFO_FC_TARGET_MRSP_KILLED_BY_LIP = 0x2100000a, /* Manual Response not sent due to a LIP */ - MPI_IOCLOGINFO_FC_TARGET_NO_CLASS_3 = 0x2100000b, /* not sent because remote node does not support Class 3 */ - MPI_IOCLOGINFO_FC_TARGET_LOGIN_NOT_VALID = 0x2100000c, /* not sent because login to remote node not validated */ - MPI_IOCLOGINFO_FC_TARGET_FROM_OUTBOUND = 0x2100000e, /* cleared from the outbound queue after a logout */ - MPI_IOCLOGINFO_FC_TARGET_WAITING_FOR_DATA_IN = 0x2100000f, /* cleared waiting for data after a logout */ - - MPI_IOCLOGINFO_FC_LAN_BASE = 0x22000000, - MPI_IOCLOGINFO_FC_LAN_TRANS_SGL_MISSING = 0x22000001, /* Transaction Context Sgl Missing */ - MPI_IOCLOGINFO_FC_LAN_TRANS_WRONG_PLACE = 0x22000002, /* Transaction Context found before an EOB */ - MPI_IOCLOGINFO_FC_LAN_TRANS_RES_BITS_SET = 0x22000003, /* Transaction Context value has reserved bits set */ - MPI_IOCLOGINFO_FC_LAN_WRONG_SGL_FLAG = 0x22000004, /* Invalid SGL Flags */ - - MPI_IOCLOGINFO_FC_MSG_BASE = 0x23000000, - - MPI_IOCLOGINFO_FC_LINK_BASE = 0x24000000, - MPI_IOCLOGINFO_FC_LINK_LOOP_INIT_TIMEOUT = 0x24000001, /* Loop initialization timed out */ - MPI_IOCLOGINFO_FC_LINK_ALREADY_INITIALIZED = 0x24000002, /* Another system controller already initialized the loop */ - MPI_IOCLOGINFO_FC_LINK_LINK_NOT_ESTABLISHED = 0x24000003, /* Not synchronized to signal or still negotiating (possible cable problem) */ - MPI_IOCLOGINFO_FC_LINK_CRC_ERROR = 0x24000004, /* CRC check detected error on received frame */ - - MPI_IOCLOGINFO_FC_CTX_BASE = 0x25000000, - - MPI_IOCLOGINFO_FC_INVALID_FIELD_BYTE_OFFSET = 0x26000000, /* The lower 24 bits give the byte offset of the field in the request message that is invalid */ - MPI_IOCLOGINFO_FC_INVALID_FIELD_MAX_OFFSET = 0x26ffffff, - - MPI_IOCLOGINFO_FC_STATE_CHANGE = 0x27000000 /* The lower 24 bits give additional information concerning state change */ - -} MpiIocLogInfoFc_t; diff --git a/drivers/message/fusion/lsi/mpi.h b/drivers/message/fusion/lsi/mpi.h index 02cdc840a06b..81ad77622dac 100644 --- a/drivers/message/fusion/lsi/mpi.h +++ b/drivers/message/fusion/lsi/mpi.h @@ -6,7 +6,7 @@ * Title: MPI Message independent structures and definitions * Creation Date: July 27, 2000 * - * mpi.h Version: 01.05.10 + * mpi.h Version: 01.05.11 * * Version History * --------------- @@ -76,6 +76,7 @@ * Added EEDP IOCStatus codes. * 08-03-05 01.05.09 Bumped MPI_HEADER_VERSION_UNIT. * 08-30-05 01.05.10 Added 2 new IOCStatus codes for Target. + * 03-27-06 01.05.11 Bumped MPI_HEADER_VERSION_UNIT. * -------------------------------------------------------------------------- */ @@ -106,7 +107,7 @@ /* Note: The major versions of 0xe0 through 0xff are reserved */ /* versioning for this MPI header set */ -#define MPI_HEADER_VERSION_UNIT (0x0C) +#define MPI_HEADER_VERSION_UNIT (0x0D) #define MPI_HEADER_VERSION_DEV (0x00) #define MPI_HEADER_VERSION_UNIT_MASK (0xFF00) #define MPI_HEADER_VERSION_UNIT_SHIFT (8) diff --git a/drivers/message/fusion/lsi/mpi_cnfg.h b/drivers/message/fusion/lsi/mpi_cnfg.h index b1becec27e1b..47e13e360c10 100644 --- a/drivers/message/fusion/lsi/mpi_cnfg.h +++ b/drivers/message/fusion/lsi/mpi_cnfg.h @@ -6,7 +6,7 @@ * Title: MPI Config message, structures, and Pages * Creation Date: July 27, 2000 * - * mpi_cnfg.h Version: 01.05.11 + * mpi_cnfg.h Version: 01.05.12 * * Version History * --------------- @@ -266,6 +266,16 @@ * Added postpone SATA Init bit to SAS IO Unit Page 1 * ControlFlags. * Changed LogEntry format for Log Page 0. + * 03-27-06 01.05.12 Added two new Flags defines for Manufacturing Page 4. + * Added Manufacturing Page 7. + * Added MPI_IOCPAGE2_CAP_FLAGS_RAID_64_BIT_ADDRESSING. + * Added IOC Page 6. + * Added PrevBootDeviceForm field to CONFIG_PAGE_BIOS_2. + * Added MaxLBAHigh field to RAID Volume Page 0. + * Added Nvdata version fields to SAS IO Unit Page 0. + * Added AdditionalControlFlags, MaxTargetPortConnectTime, + * ReportDeviceMissingDelay, and IODeviceMissingDelay + * fields to SAS IO Unit Page 1. * -------------------------------------------------------------------------- */ @@ -631,9 +641,11 @@ typedef struct _CONFIG_PAGE_MANUFACTURING_4 } CONFIG_PAGE_MANUFACTURING_4, MPI_POINTER PTR_CONFIG_PAGE_MANUFACTURING_4, ManufacturingPage4_t, MPI_POINTER pManufacturingPage4_t; -#define MPI_MANUFACTURING4_PAGEVERSION (0x03) +#define MPI_MANUFACTURING4_PAGEVERSION (0x04) /* defines for the Flags field */ +#define MPI_MANPAGE4_FORCE_BAD_BLOCK_TABLE (0x80) +#define MPI_MANPAGE4_FORCE_OFFLINE_FAILOVER (0x40) #define MPI_MANPAGE4_IME_DISABLE (0x20) #define MPI_MANPAGE4_IM_DISABLE (0x10) #define MPI_MANPAGE4_IS_DISABLE (0x08) @@ -668,6 +680,66 @@ typedef struct _CONFIG_PAGE_MANUFACTURING_6 #define MPI_MANUFACTURING6_PAGEVERSION (0x00) +typedef struct _MPI_MANPAGE7_CONNECTOR_INFO +{ + U32 Pinout; /* 00h */ + U8 Connector[16]; /* 04h */ + U8 Location; /* 14h */ + U8 Reserved1; /* 15h */ + U16 Slot; /* 16h */ + U32 Reserved2; /* 18h */ +} MPI_MANPAGE7_CONNECTOR_INFO, MPI_POINTER PTR_MPI_MANPAGE7_CONNECTOR_INFO, + MpiManPage7ConnectorInfo_t, MPI_POINTER pMpiManPage7ConnectorInfo_t; + +/* defines for the Pinout field */ +#define MPI_MANPAGE7_PINOUT_SFF_8484_L4 (0x00080000) +#define MPI_MANPAGE7_PINOUT_SFF_8484_L3 (0x00040000) +#define MPI_MANPAGE7_PINOUT_SFF_8484_L2 (0x00020000) +#define MPI_MANPAGE7_PINOUT_SFF_8484_L1 (0x00010000) +#define MPI_MANPAGE7_PINOUT_SFF_8470_L4 (0x00000800) +#define MPI_MANPAGE7_PINOUT_SFF_8470_L3 (0x00000400) +#define MPI_MANPAGE7_PINOUT_SFF_8470_L2 (0x00000200) +#define MPI_MANPAGE7_PINOUT_SFF_8470_L1 (0x00000100) +#define MPI_MANPAGE7_PINOUT_SFF_8482 (0x00000002) +#define MPI_MANPAGE7_PINOUT_CONNECTION_UNKNOWN (0x00000001) + +/* defines for the Location field */ +#define MPI_MANPAGE7_LOCATION_UNKNOWN (0x01) +#define MPI_MANPAGE7_LOCATION_INTERNAL (0x02) +#define MPI_MANPAGE7_LOCATION_EXTERNAL (0x04) +#define MPI_MANPAGE7_LOCATION_SWITCHABLE (0x08) +#define MPI_MANPAGE7_LOCATION_AUTO (0x10) +#define MPI_MANPAGE7_LOCATION_NOT_PRESENT (0x20) +#define MPI_MANPAGE7_LOCATION_NOT_CONNECTED (0x80) + +/* + * Host code (drivers, BIOS, utilities, etc.) should leave this define set to + * one and check NumPhys at runtime. + */ +#ifndef MPI_MANPAGE7_CONNECTOR_INFO_MAX +#define MPI_MANPAGE7_CONNECTOR_INFO_MAX (1) +#endif + +typedef struct _CONFIG_PAGE_MANUFACTURING_7 +{ + CONFIG_PAGE_HEADER Header; /* 00h */ + U32 Reserved1; /* 04h */ + U32 Reserved2; /* 08h */ + U32 Flags; /* 0Ch */ + U8 EnclosureName[16]; /* 10h */ + U8 NumPhys; /* 20h */ + U8 Reserved3; /* 21h */ + U16 Reserved4; /* 22h */ + MPI_MANPAGE7_CONNECTOR_INFO ConnectorInfo[MPI_MANPAGE7_CONNECTOR_INFO_MAX]; /* 24h */ +} CONFIG_PAGE_MANUFACTURING_7, MPI_POINTER PTR_CONFIG_PAGE_MANUFACTURING_7, + ManufacturingPage7_t, MPI_POINTER pManufacturingPage7_t; + +#define MPI_MANUFACTURING7_PAGEVERSION (0x00) + +/* defines for the Flags field */ +#define MPI_MANPAGE7_FLAG_USE_SLOT_INFO (0x00000001) + + /**************************************************************************** * IO Unit Config Pages ****************************************************************************/ @@ -867,7 +939,7 @@ typedef struct _CONFIG_PAGE_IOC_2 } CONFIG_PAGE_IOC_2, MPI_POINTER PTR_CONFIG_PAGE_IOC_2, IOCPage2_t, MPI_POINTER pIOCPage2_t; -#define MPI_IOCPAGE2_PAGEVERSION (0x03) +#define MPI_IOCPAGE2_PAGEVERSION (0x04) /* IOC Page 2 Capabilities flags */ @@ -878,6 +950,7 @@ typedef struct _CONFIG_PAGE_IOC_2 #define MPI_IOCPAGE2_CAP_FLAGS_RAID_6_SUPPORT (0x00000010) #define MPI_IOCPAGE2_CAP_FLAGS_RAID_10_SUPPORT (0x00000020) #define MPI_IOCPAGE2_CAP_FLAGS_RAID_50_SUPPORT (0x00000040) +#define MPI_IOCPAGE2_CAP_FLAGS_RAID_64_BIT_ADDRESSING (0x10000000) #define MPI_IOCPAGE2_CAP_FLAGS_SES_SUPPORT (0x20000000) #define MPI_IOCPAGE2_CAP_FLAGS_SAFTE_SUPPORT (0x40000000) #define MPI_IOCPAGE2_CAP_FLAGS_CROSS_CHANNEL_SUPPORT (0x80000000) @@ -975,6 +1048,44 @@ typedef struct _CONFIG_PAGE_IOC_5 #define MPI_IOCPAGE5_PAGEVERSION (0x00) +typedef struct _CONFIG_PAGE_IOC_6 +{ + CONFIG_PAGE_HEADER Header; /* 00h */ + U32 CapabilitiesFlags; /* 04h */ + U8 MaxDrivesIS; /* 08h */ + U8 MaxDrivesIM; /* 09h */ + U8 MaxDrivesIME; /* 0Ah */ + U8 Reserved1; /* 0Bh */ + U8 MinDrivesIS; /* 0Ch */ + U8 MinDrivesIM; /* 0Dh */ + U8 MinDrivesIME; /* 0Eh */ + U8 Reserved2; /* 0Fh */ + U8 MaxGlobalHotSpares; /* 10h */ + U8 Reserved3; /* 11h */ + U16 Reserved4; /* 12h */ + U32 Reserved5; /* 14h */ + U32 SupportedStripeSizeMapIS; /* 18h */ + U32 SupportedStripeSizeMapIME; /* 1Ch */ + U32 Reserved6; /* 20h */ + U8 MetadataSize; /* 24h */ + U8 Reserved7; /* 25h */ + U16 Reserved8; /* 26h */ + U16 MaxBadBlockTableEntries; /* 28h */ + U16 Reserved9; /* 2Ah */ + U16 IRNvsramUsage; /* 2Ch */ + U16 Reserved10; /* 2Eh */ + U32 IRNvsramVersion; /* 30h */ + U32 Reserved11; /* 34h */ + U32 Reserved12; /* 38h */ +} CONFIG_PAGE_IOC_6, MPI_POINTER PTR_CONFIG_PAGE_IOC_6, + IOCPage6_t, MPI_POINTER pIOCPage6_t; + +#define MPI_IOCPAGE6_PAGEVERSION (0x00) + +/* IOC Page 6 Capabilities Flags */ + +#define MPI_IOCPAGE6_CAP_FLAGS_GLOBAL_HOT_SPARE (0x00000001) + /**************************************************************************** * BIOS Config Pages @@ -1218,13 +1329,13 @@ typedef struct _CONFIG_PAGE_BIOS_2 U32 Reserved5; /* 14h */ U32 Reserved6; /* 18h */ U8 BootDeviceForm; /* 1Ch */ - U8 Reserved7; /* 1Dh */ + U8 PrevBootDeviceForm; /* 1Ch */ U16 Reserved8; /* 1Eh */ MPI_BIOSPAGE2_BOOT_DEVICE BootDevice; /* 20h */ } CONFIG_PAGE_BIOS_2, MPI_POINTER PTR_CONFIG_PAGE_BIOS_2, BIOSPage2_t, MPI_POINTER pBIOSPage2_t; -#define MPI_BIOSPAGE2_PAGEVERSION (0x01) +#define MPI_BIOSPAGE2_PAGEVERSION (0x02) #define MPI_BIOSPAGE2_FORM_MASK (0x0F) #define MPI_BIOSPAGE2_FORM_ADAPTER_ORDER (0x00) @@ -2080,7 +2191,7 @@ typedef struct _CONFIG_PAGE_RAID_VOL_0 RAID_VOL0_STATUS VolumeStatus; /* 08h */ RAID_VOL0_SETTINGS VolumeSettings; /* 0Ch */ U32 MaxLBA; /* 10h */ - U32 Reserved1; /* 14h */ + U32 MaxLBAHigh; /* 14h */ U32 StripeSize; /* 18h */ U32 Reserved2; /* 1Ch */ U32 Reserved3; /* 20h */ @@ -2092,7 +2203,7 @@ typedef struct _CONFIG_PAGE_RAID_VOL_0 } CONFIG_PAGE_RAID_VOL_0, MPI_POINTER PTR_CONFIG_PAGE_RAID_VOL_0, RaidVolumePage0_t, MPI_POINTER pRaidVolumePage0_t; -#define MPI_RAIDVOLPAGE0_PAGEVERSION (0x05) +#define MPI_RAIDVOLPAGE0_PAGEVERSION (0x06) /* values for RAID Volume Page 0 InactiveStatus field */ #define MPI_RAIDVOLPAGE0_UNKNOWN_INACTIVE (0x00) @@ -2324,7 +2435,8 @@ typedef struct _MPI_SAS_IO_UNIT0_PHY_DATA typedef struct _CONFIG_PAGE_SAS_IO_UNIT_0 { CONFIG_EXTENDED_PAGE_HEADER Header; /* 00h */ - U32 Reserved1; /* 08h */ + U16 NvdataVersionDefault; /* 08h */ + U16 NvdataVersionPersistent; /* 0Ah */ U8 NumPhys; /* 0Ch */ U8 Reserved2; /* 0Dh */ U16 Reserved3; /* 0Eh */ @@ -2332,7 +2444,7 @@ typedef struct _CONFIG_PAGE_SAS_IO_UNIT_0 } CONFIG_PAGE_SAS_IO_UNIT_0, MPI_POINTER PTR_CONFIG_PAGE_SAS_IO_UNIT_0, SasIOUnitPage0_t, MPI_POINTER pSasIOUnitPage0_t; -#define MPI_SASIOUNITPAGE0_PAGEVERSION (0x03) +#define MPI_SASIOUNITPAGE0_PAGEVERSION (0x04) /* values for SAS IO Unit Page 0 PortFlags */ #define MPI_SAS_IOUNIT0_PORT_FLAGS_DISCOVERY_IN_PROGRESS (0x08) @@ -2373,12 +2485,13 @@ typedef struct _CONFIG_PAGE_SAS_IO_UNIT_0 typedef struct _MPI_SAS_IO_UNIT1_PHY_DATA { - U8 Port; /* 00h */ - U8 PortFlags; /* 01h */ - U8 PhyFlags; /* 02h */ - U8 MaxMinLinkRate; /* 03h */ - U32 ControllerPhyDeviceInfo;/* 04h */ - U32 Reserved1; /* 08h */ + U8 Port; /* 00h */ + U8 PortFlags; /* 01h */ + U8 PhyFlags; /* 02h */ + U8 MaxMinLinkRate; /* 03h */ + U32 ControllerPhyDeviceInfo; /* 04h */ + U16 MaxTargetPortConnectTime; /* 08h */ + U16 Reserved1; /* 0Ah */ } MPI_SAS_IO_UNIT1_PHY_DATA, MPI_POINTER PTR_MPI_SAS_IO_UNIT1_PHY_DATA, SasIOUnit1PhyData, MPI_POINTER pSasIOUnit1PhyData; @@ -2395,15 +2508,17 @@ typedef struct _CONFIG_PAGE_SAS_IO_UNIT_1 CONFIG_EXTENDED_PAGE_HEADER Header; /* 00h */ U16 ControlFlags; /* 08h */ U16 MaxNumSATATargets; /* 0Ah */ - U32 Reserved1; /* 0Ch */ + U16 AdditionalControlFlags; /* 0Ch */ + U16 Reserved1; /* 0Eh */ U8 NumPhys; /* 10h */ U8 SATAMaxQDepth; /* 11h */ - U16 Reserved2; /* 12h */ + U8 ReportDeviceMissingDelay; /* 12h */ + U8 IODeviceMissingDelay; /* 13h */ MPI_SAS_IO_UNIT1_PHY_DATA PhyData[MPI_SAS_IOUNIT1_PHY_MAX]; /* 14h */ } CONFIG_PAGE_SAS_IO_UNIT_1, MPI_POINTER PTR_CONFIG_PAGE_SAS_IO_UNIT_1, SasIOUnitPage1_t, MPI_POINTER pSasIOUnitPage1_t; -#define MPI_SASIOUNITPAGE1_PAGEVERSION (0x05) +#define MPI_SASIOUNITPAGE1_PAGEVERSION (0x06) /* values for SAS IO Unit Page 1 ControlFlags */ #define MPI_SAS_IOUNIT1_CONTROL_DEVICE_SELF_TEST (0x8000) @@ -2428,6 +2543,13 @@ typedef struct _CONFIG_PAGE_SAS_IO_UNIT_1 #define MPI_SAS_IOUNIT1_CONTROL_FIRST_LVL_DISC_ONLY (0x0002) #define MPI_SAS_IOUNIT1_CONTROL_CLEAR_AFFILIATION (0x0001) +/* values for SAS IO Unit Page 1 AdditionalControlFlags */ +#define MPI_SAS_IOUNIT1_ACONTROL_ALLOW_TABLE_TO_TABLE (0x0001) + +/* defines for SAS IO Unit Page 1 ReportDeviceMissingDelay */ +#define MPI_SAS_IOUNIT1_REPORT_MISSING_TIMEOUT_MASK (0x7F) +#define MPI_SAS_IOUNIT1_REPORT_MISSING_UNIT_16 (0x80) + /* values for SAS IO Unit Page 1 PortFlags */ #define MPI_SAS_IOUNIT1_PORT_FLAGS_0_TARGET_IOC_NUM (0x00) #define MPI_SAS_IOUNIT1_PORT_FLAGS_1_TARGET_IOC_NUM (0x04) diff --git a/drivers/message/fusion/lsi/mpi_history.txt b/drivers/message/fusion/lsi/mpi_history.txt index 4a5f8dd1d766..582cfe7c2aa1 100644 --- a/drivers/message/fusion/lsi/mpi_history.txt +++ b/drivers/message/fusion/lsi/mpi_history.txt @@ -6,25 +6,25 @@ Copyright (c) 2000-2005 LSI Logic Corporation. --------------------------------------- - Header Set Release Version: 01.05.12 - Header Set Release Date: 08-30-05 + Header Set Release Version: 01.05.13 + Header Set Release Date: 03-27-06 --------------------------------------- Filename Current version Prior version ---------- --------------- ------------- - mpi.h 01.05.10 01.05.09 - mpi_ioc.h 01.05.10 01.05.09 - mpi_cnfg.h 01.05.11 01.05.10 - mpi_init.h 01.05.06 01.05.06 - mpi_targ.h 01.05.05 01.05.05 + mpi.h 01.05.11 01.05.10 + mpi_ioc.h 01.05.11 01.05.10 + mpi_cnfg.h 01.05.12 01.05.11 + mpi_init.h 01.05.07 01.05.06 + mpi_targ.h 01.05.06 01.05.05 mpi_fc.h 01.05.01 01.05.01 mpi_lan.h 01.05.01 01.05.01 mpi_raid.h 01.05.02 01.05.02 mpi_tool.h 01.05.03 01.05.03 mpi_inb.h 01.05.01 01.05.01 - mpi_sas.h 01.05.02 01.05.01 - mpi_type.h 01.05.02 01.05.01 - mpi_history.txt 01.05.12 01.05.11 + mpi_sas.h 01.05.03 01.05.02 + mpi_type.h 01.05.02 01.05.02 + mpi_history.txt 01.05.13 01.05.12 * Date Version Description @@ -93,6 +93,7 @@ mpi.h * Added EEDP IOCStatus codes. * 08-03-05 01.05.09 Bumped MPI_HEADER_VERSION_UNIT. * 08-30-05 01.05.10 Added 2 new IOCStatus codes for Target. + * 03-27-06 01.05.11 Bumped MPI_HEADER_VERSION_UNIT. * -------------------------------------------------------------------------- mpi_ioc.h @@ -170,6 +171,17 @@ mpi_ioc.h * Added new ReasonCode value for SAS Device Status Change * event. * Added new family code for FC949E. + * 03-27-06 01.05.11 Added MPI_IOCFACTS_CAPABILITY_TLR. + * Added additional Reason Codes and more event data fields + * to EVENT_DATA_SAS_DEVICE_STATUS_CHANGE. + * Added EVENT_DATA_SAS_BROADCAST_PRIMITIVE structure and + * new event. + * Added MPI_EVENT_SAS_SMP_ERROR and event data structure. + * Added MPI_EVENT_SAS_INIT_DEVICE_STATUS_CHANGE and event + * data structure. + * Added MPI_EVENT_SAS_INIT_TABLE_OVERFLOW and event + * data structure. + * Added MPI_EXT_IMAGE_TYPE_INITIALIZATION. * -------------------------------------------------------------------------- mpi_cnfg.h @@ -425,6 +437,16 @@ mpi_cnfg.h * Added postpone SATA Init bit to SAS IO Unit Page 1 * ControlFlags. * Changed LogEntry format for Log Page 0. + * 03-27-06 01.05.12 Added two new Flags defines for Manufacturing Page 4. + * Added Manufacturing Page 7. + * Added MPI_IOCPAGE2_CAP_FLAGS_RAID_64_BIT_ADDRESSING. + * Added IOC Page 6. + * Added PrevBootDeviceForm field to CONFIG_PAGE_BIOS_2. + * Added MaxLBAHigh field to RAID Volume Page 0. + * Added Nvdata version fields to SAS IO Unit Page 0. + * Added AdditionalControlFlags, MaxTargetPortConnectTime, + * ReportDeviceMissingDelay, and IODeviceMissingDelay + * fields to SAS IO Unit Page 1. * -------------------------------------------------------------------------- mpi_init.h @@ -467,6 +489,7 @@ mpi_init.h * Added four new defines for SEP SlotStatus. * 08-03-05 01.05.06 Fixed some MPI_SCSIIO32_MSGFLGS_ defines to make them * unique in the first 32 characters. + * 03-27-06 01.05.07 Added Task Management type of Clear ACA. * -------------------------------------------------------------------------- mpi_targ.h @@ -511,6 +534,7 @@ mpi_targ.h * 02-22-05 01.05.03 Changed a comment. * 03-11-05 01.05.04 Removed TargetAssistExtended Request. * 06-24-05 01.05.05 Added TargetAssistExtended structures and defines. + * 03-27-06 01.05.06 Added a comment. * -------------------------------------------------------------------------- mpi_fc.h @@ -610,6 +634,10 @@ mpi_sas.h * 08-30-05 01.05.02 Added DeviceInfo bit for SEP. * Added PrimFlags and Primitive field to SAS IO Unit * Control request, and added a new operation code. + * 03-27-06 01.05.03 Added Force Full Discovery, Transmit Port Select Signal, + * and Remove Device operations to SAS IO Unit Control. + * Added DevHandle field to SAS IO Unit Control request and + * reply. * -------------------------------------------------------------------------- mpi_type.h @@ -625,20 +653,20 @@ mpi_type.h mpi_history.txt Parts list history -Filename 01.05.12 01.05.11 01.05.10 01.05.09 ----------- -------- -------- -------- -------- -mpi.h 01.05.10 01.05.09 01.05.08 01.05.07 -mpi_ioc.h 01.05.10 01.05.09 01.05.09 01.05.08 -mpi_cnfg.h 01.05.11 01.05.10 01.05.09 01.05.08 -mpi_init.h 01.05.06 01.05.06 01.05.05 01.05.04 -mpi_targ.h 01.05.05 01.05.05 01.05.05 01.05.04 -mpi_fc.h 01.05.01 01.05.01 01.05.01 01.05.01 -mpi_lan.h 01.05.01 01.05.01 01.05.01 01.05.01 -mpi_raid.h 01.05.02 01.05.02 01.05.02 01.05.02 -mpi_tool.h 01.05.03 01.05.03 01.05.03 01.05.03 -mpi_inb.h 01.05.01 01.05.01 01.05.01 01.05.01 -mpi_sas.h 01.05.02 01.05.01 01.05.01 01.05.01 -mpi_type.h 01.05.02 01.05.01 01.05.01 01.05.01 +Filename 01.05.13 01.05.12 01.05.11 01.05.10 01.05.09 +---------- -------- -------- -------- -------- -------- +mpi.h 01.05.11 01.05.10 01.05.09 01.05.08 01.05.07 +mpi_ioc.h 01.05.11 01.05.10 01.05.09 01.05.09 01.05.08 +mpi_cnfg.h 01.05.12 01.05.11 01.05.10 01.05.09 01.05.08 +mpi_init.h 01.05.07 01.05.06 01.05.06 01.05.05 01.05.04 +mpi_targ.h 01.05.06 01.05.05 01.05.05 01.05.05 01.05.04 +mpi_fc.h 01.05.01 01.05.01 01.05.01 01.05.01 01.05.01 +mpi_lan.h 01.05.01 01.05.01 01.05.01 01.05.01 01.05.01 +mpi_raid.h 01.05.02 01.05.02 01.05.02 01.05.02 01.05.02 +mpi_tool.h 01.05.03 01.05.03 01.05.03 01.05.03 01.05.03 +mpi_inb.h 01.05.01 01.05.01 01.05.01 01.05.01 01.05.01 +mpi_sas.h 01.05.03 01.05.02 01.05.01 01.05.01 01.05.01 +mpi_type.h 01.05.02 01.05.02 01.05.01 01.05.01 01.05.01 Filename 01.05.08 01.05.07 01.05.06 01.05.05 01.05.04 01.05.03 ---------- -------- -------- -------- -------- -------- -------- diff --git a/drivers/message/fusion/lsi/mpi_init.h b/drivers/message/fusion/lsi/mpi_init.h index 68941f459ca3..c1c678989a23 100644 --- a/drivers/message/fusion/lsi/mpi_init.h +++ b/drivers/message/fusion/lsi/mpi_init.h @@ -6,7 +6,7 @@ * Title: MPI initiator mode messages and structures * Creation Date: June 8, 2000 * - * mpi_init.h Version: 01.05.06 + * mpi_init.h Version: 01.05.07 * * Version History * --------------- @@ -52,6 +52,7 @@ * Added four new defines for SEP SlotStatus. * 08-03-05 01.05.06 Fixed some MPI_SCSIIO32_MSGFLGS_ defines to make them * unique in the first 32 characters. + * 03-27-06 01.05.07 Added Task Management type of Clear ACA. * -------------------------------------------------------------------------- */ @@ -427,6 +428,7 @@ typedef struct _MSG_SCSI_TASK_MGMT #define MPI_SCSITASKMGMT_TASKTYPE_LOGICAL_UNIT_RESET (0x05) #define MPI_SCSITASKMGMT_TASKTYPE_CLEAR_TASK_SET (0x06) #define MPI_SCSITASKMGMT_TASKTYPE_QUERY_TASK (0x07) +#define MPI_SCSITASKMGMT_TASKTYPE_CLEAR_ACA (0x08) /* MsgFlags bits */ #define MPI_SCSITASKMGMT_MSGFLAGS_TARGET_RESET_OPTION (0x00) diff --git a/drivers/message/fusion/lsi/mpi_ioc.h b/drivers/message/fusion/lsi/mpi_ioc.h index 2c5f43fa7c73..18ba407fd399 100644 --- a/drivers/message/fusion/lsi/mpi_ioc.h +++ b/drivers/message/fusion/lsi/mpi_ioc.h @@ -6,7 +6,7 @@ * Title: MPI IOC, Port, Event, FW Download, and FW Upload messages * Creation Date: August 11, 2000 * - * mpi_ioc.h Version: 01.05.10 + * mpi_ioc.h Version: 01.05.11 * * Version History * --------------- @@ -87,6 +87,17 @@ * Added new ReasonCode value for SAS Device Status Change * event. * Added new family code for FC949E. + * 03-27-06 01.05.11 Added MPI_IOCFACTS_CAPABILITY_TLR. + * Added additional Reason Codes and more event data fields + * to EVENT_DATA_SAS_DEVICE_STATUS_CHANGE. + * Added EVENT_DATA_SAS_BROADCAST_PRIMITIVE structure and + * new event. + * Added MPI_EVENT_SAS_SMP_ERROR and event data structure. + * Added MPI_EVENT_SAS_INIT_DEVICE_STATUS_CHANGE and event + * data structure. + * Added MPI_EVENT_SAS_INIT_TABLE_OVERFLOW and event + * data structure. + * Added MPI_EXT_IMAGE_TYPE_INITIALIZATION. * -------------------------------------------------------------------------- */ @@ -272,6 +283,7 @@ typedef struct _MSG_IOC_FACTS_REPLY #define MPI_IOCFACTS_CAPABILITY_MULTICAST (0x00000100) #define MPI_IOCFACTS_CAPABILITY_SCSIIO32 (0x00000200) #define MPI_IOCFACTS_CAPABILITY_NO_SCSIIO16 (0x00000400) +#define MPI_IOCFACTS_CAPABILITY_TLR (0x00000800) /***************************************************************************** @@ -448,30 +460,34 @@ typedef struct _MSG_EVENT_ACK_REPLY /* Event */ -#define MPI_EVENT_NONE (0x00000000) -#define MPI_EVENT_LOG_DATA (0x00000001) -#define MPI_EVENT_STATE_CHANGE (0x00000002) -#define MPI_EVENT_UNIT_ATTENTION (0x00000003) -#define MPI_EVENT_IOC_BUS_RESET (0x00000004) -#define MPI_EVENT_EXT_BUS_RESET (0x00000005) -#define MPI_EVENT_RESCAN (0x00000006) -#define MPI_EVENT_LINK_STATUS_CHANGE (0x00000007) -#define MPI_EVENT_LOOP_STATE_CHANGE (0x00000008) -#define MPI_EVENT_LOGOUT (0x00000009) -#define MPI_EVENT_EVENT_CHANGE (0x0000000A) -#define MPI_EVENT_INTEGRATED_RAID (0x0000000B) -#define MPI_EVENT_SCSI_DEVICE_STATUS_CHANGE (0x0000000C) -#define MPI_EVENT_ON_BUS_TIMER_EXPIRED (0x0000000D) -#define MPI_EVENT_QUEUE_FULL (0x0000000E) -#define MPI_EVENT_SAS_DEVICE_STATUS_CHANGE (0x0000000F) -#define MPI_EVENT_SAS_SES (0x00000010) -#define MPI_EVENT_PERSISTENT_TABLE_FULL (0x00000011) -#define MPI_EVENT_SAS_PHY_LINK_STATUS (0x00000012) -#define MPI_EVENT_SAS_DISCOVERY_ERROR (0x00000013) -#define MPI_EVENT_IR_RESYNC_UPDATE (0x00000014) -#define MPI_EVENT_IR2 (0x00000015) -#define MPI_EVENT_SAS_DISCOVERY (0x00000016) -#define MPI_EVENT_LOG_ENTRY_ADDED (0x00000021) +#define MPI_EVENT_NONE (0x00000000) +#define MPI_EVENT_LOG_DATA (0x00000001) +#define MPI_EVENT_STATE_CHANGE (0x00000002) +#define MPI_EVENT_UNIT_ATTENTION (0x00000003) +#define MPI_EVENT_IOC_BUS_RESET (0x00000004) +#define MPI_EVENT_EXT_BUS_RESET (0x00000005) +#define MPI_EVENT_RESCAN (0x00000006) +#define MPI_EVENT_LINK_STATUS_CHANGE (0x00000007) +#define MPI_EVENT_LOOP_STATE_CHANGE (0x00000008) +#define MPI_EVENT_LOGOUT (0x00000009) +#define MPI_EVENT_EVENT_CHANGE (0x0000000A) +#define MPI_EVENT_INTEGRATED_RAID (0x0000000B) +#define MPI_EVENT_SCSI_DEVICE_STATUS_CHANGE (0x0000000C) +#define MPI_EVENT_ON_BUS_TIMER_EXPIRED (0x0000000D) +#define MPI_EVENT_QUEUE_FULL (0x0000000E) +#define MPI_EVENT_SAS_DEVICE_STATUS_CHANGE (0x0000000F) +#define MPI_EVENT_SAS_SES (0x00000010) +#define MPI_EVENT_PERSISTENT_TABLE_FULL (0x00000011) +#define MPI_EVENT_SAS_PHY_LINK_STATUS (0x00000012) +#define MPI_EVENT_SAS_DISCOVERY_ERROR (0x00000013) +#define MPI_EVENT_IR_RESYNC_UPDATE (0x00000014) +#define MPI_EVENT_IR2 (0x00000015) +#define MPI_EVENT_SAS_DISCOVERY (0x00000016) +#define MPI_EVENT_SAS_BROADCAST_PRIMITIVE (0x00000017) +#define MPI_EVENT_SAS_INIT_DEVICE_STATUS_CHANGE (0x00000018) +#define MPI_EVENT_SAS_INIT_TABLE_OVERFLOW (0x00000019) +#define MPI_EVENT_SAS_SMP_ERROR (0x0000001A) +#define MPI_EVENT_LOG_ENTRY_ADDED (0x00000021) /* AckRequired field values */ @@ -558,18 +574,25 @@ typedef struct _EVENT_DATA_SAS_DEVICE_STATUS_CHANGE U8 PhyNum; /* 0Eh */ U8 Reserved1; /* 0Fh */ U64 SASAddress; /* 10h */ + U8 LUN[8]; /* 18h */ + U16 TaskTag; /* 20h */ + U16 Reserved2; /* 22h */ } EVENT_DATA_SAS_DEVICE_STATUS_CHANGE, MPI_POINTER PTR_EVENT_DATA_SAS_DEVICE_STATUS_CHANGE, MpiEventDataSasDeviceStatusChange_t, MPI_POINTER pMpiEventDataSasDeviceStatusChange_t; /* MPI SAS Device Status Change Event data ReasonCode values */ -#define MPI_EVENT_SAS_DEV_STAT_RC_ADDED (0x03) -#define MPI_EVENT_SAS_DEV_STAT_RC_NOT_RESPONDING (0x04) -#define MPI_EVENT_SAS_DEV_STAT_RC_SMART_DATA (0x05) -#define MPI_EVENT_SAS_DEV_STAT_RC_NO_PERSIST_ADDED (0x06) -#define MPI_EVENT_SAS_DEV_STAT_RC_UNSUPPORTED (0x07) -#define MPI_EVENT_SAS_DEV_STAT_RC_INTERNAL_DEVICE_RESET (0x08) +#define MPI_EVENT_SAS_DEV_STAT_RC_ADDED (0x03) +#define MPI_EVENT_SAS_DEV_STAT_RC_NOT_RESPONDING (0x04) +#define MPI_EVENT_SAS_DEV_STAT_RC_SMART_DATA (0x05) +#define MPI_EVENT_SAS_DEV_STAT_RC_NO_PERSIST_ADDED (0x06) +#define MPI_EVENT_SAS_DEV_STAT_RC_UNSUPPORTED (0x07) +#define MPI_EVENT_SAS_DEV_STAT_RC_INTERNAL_DEVICE_RESET (0x08) +#define MPI_EVENT_SAS_DEV_STAT_RC_TASK_ABORT_INTERNAL (0x09) +#define MPI_EVENT_SAS_DEV_STAT_RC_ABORT_TASK_SET_INTERNAL (0x0A) +#define MPI_EVENT_SAS_DEV_STAT_RC_CLEAR_TASK_SET_INTERNAL (0x0B) +#define MPI_EVENT_SAS_DEV_STAT_RC_QUERY_TASK_INTERNAL (0x0C) /* SCSI Event data for Queue Full event */ @@ -742,6 +765,27 @@ typedef struct _EVENT_DATA_SAS_SES } EVENT_DATA_SAS_SES, MPI_POINTER PTR_EVENT_DATA_SAS_SES, MpiEventDataSasSes_t, MPI_POINTER pMpiEventDataSasSes_t; +/* SAS Broadcast Primitive Event data */ + +typedef struct _EVENT_DATA_SAS_BROADCAST_PRIMITIVE +{ + U8 PhyNum; /* 00h */ + U8 Port; /* 01h */ + U8 PortWidth; /* 02h */ + U8 Primitive; /* 04h */ +} EVENT_DATA_SAS_BROADCAST_PRIMITIVE, + MPI_POINTER PTR_EVENT_DATA_SAS_BROADCAST_PRIMITIVE, + MpiEventDataSasBroadcastPrimitive_t, + MPI_POINTER pMpiEventDataSasBroadcastPrimitive_t; + +#define MPI_EVENT_PRIMITIVE_CHANGE (0x01) +#define MPI_EVENT_PRIMITIVE_EXPANDER (0x03) +#define MPI_EVENT_PRIMITIVE_RESERVED2 (0x04) +#define MPI_EVENT_PRIMITIVE_RESERVED3 (0x05) +#define MPI_EVENT_PRIMITIVE_RESERVED4 (0x06) +#define MPI_EVENT_PRIMITIVE_CHANGE0_RESERVED (0x07) +#define MPI_EVENT_PRIMITIVE_CHANGE1_RESERVED (0x08) + /* SAS Phy Link Status Event data */ typedef struct _EVENT_DATA_SAS_PHY_LINK_STATUS @@ -804,6 +848,53 @@ typedef struct _EVENT_DATA_DISCOVERY_ERROR #define MPI_EVENT_DSCVRY_ERR_DS_MULTPL_PATHS (0x00000800) #define MPI_EVENT_DSCVRY_ERR_DS_MAX_SATA_TARGETS (0x00001000) +/* SAS SMP Error Event data */ + +typedef struct _EVENT_DATA_SAS_SMP_ERROR +{ + U8 Status; /* 00h */ + U8 Port; /* 01h */ + U8 SMPFunctionResult; /* 02h */ + U8 Reserved1; /* 03h */ + U64 SASAddress; /* 04h */ +} EVENT_DATA_SAS_SMP_ERROR, MPI_POINTER PTR_EVENT_DATA_SAS_SMP_ERROR, + MpiEventDataSasSmpError_t, MPI_POINTER pMpiEventDataSasSmpError_t; + +/* defines for the Status field of the SAS SMP Error event */ +#define MPI_EVENT_SAS_SMP_FUNCTION_RESULT_VALID (0x00) +#define MPI_EVENT_SAS_SMP_CRC_ERROR (0x01) +#define MPI_EVENT_SAS_SMP_TIMEOUT (0x02) +#define MPI_EVENT_SAS_SMP_NO_DESTINATION (0x03) +#define MPI_EVENT_SAS_SMP_BAD_DESTINATION (0x04) + +/* SAS Initiator Device Status Change Event data */ + +typedef struct _EVENT_DATA_SAS_INIT_DEV_STATUS_CHANGE +{ + U8 ReasonCode; /* 00h */ + U8 Port; /* 01h */ + U16 DevHandle; /* 02h */ + U64 SASAddress; /* 04h */ +} EVENT_DATA_SAS_INIT_DEV_STATUS_CHANGE, + MPI_POINTER PTR_EVENT_DATA_SAS_INIT_DEV_STATUS_CHANGE, + MpiEventDataSasInitDevStatusChange_t, + MPI_POINTER pMpiEventDataSasInitDevStatusChange_t; + +/* defines for the ReasonCode field of the SAS Initiator Device Status Change event */ +#define MPI_EVENT_SAS_INIT_RC_ADDED (0x01) + +/* SAS Initiator Device Table Overflow Event data */ + +typedef struct _EVENT_DATA_SAS_INIT_TABLE_OVERFLOW +{ + U8 MaxInit; /* 00h */ + U8 CurrentInit; /* 01h */ + U16 Reserved1; /* 02h */ +} EVENT_DATA_SAS_INIT_TABLE_OVERFLOW, + MPI_POINTER PTR_EVENT_DATA_SAS_INIT_TABLE_OVERFLOW, + MpiEventDataSasInitTableOverflow_t, + MPI_POINTER pMpiEventDataSasInitTableOverflow_t; + /***************************************************************************** * @@ -1013,5 +1104,6 @@ typedef struct _MPI_EXT_IMAGE_HEADER #define MPI_EXT_IMAGE_TYPE_FW (0x01) #define MPI_EXT_IMAGE_TYPE_NVDATA (0x03) #define MPI_EXT_IMAGE_TYPE_BOOTLOADER (0x04) +#define MPI_EXT_IMAGE_TYPE_INITIALIZATION (0x05) #endif diff --git a/drivers/message/fusion/lsi/mpi_log_sas.h b/drivers/message/fusion/lsi/mpi_log_sas.h index a9c14ad132ce..871ebc08b706 100644 --- a/drivers/message/fusion/lsi/mpi_log_sas.h +++ b/drivers/message/fusion/lsi/mpi_log_sas.h @@ -13,6 +13,8 @@ #ifndef IOPI_IOCLOGINFO_H_INCLUDED #define IOPI_IOCLOGINFO_H_INCLUDED +#define SAS_LOGINFO_NEXUS_LOSS 0x31170000 +#define SAS_LOGINFO_MASK 0xFFFF0000 /****************************************************************************/ /* IOC LOGINFO defines, 0x00000000 - 0x0FFFFFFF */ @@ -51,6 +53,9 @@ #define IOP_LOGINFO_CODE_CONFIG_INVALID_PAGE_DNM (0x00030500) /* Device Not Mapped */ #define IOP_LOGINFO_CODE_CONFIG_INVALID_PAGE_PERSIST (0x00030600) /* Persistent Page not found */ #define IOP_LOGINFO_CODE_CONFIG_INVALID_PAGE_DEFAULT (0x00030700) /* Default Page not found */ + +#define IOP_LOGINFO_CODE_DIAG_MSG_ERROR (0x00040000) /* Error handling diag msg - or'd with diag status */ + #define IOP_LOGINFO_CODE_TASK_TERMINATED (0x00050000) #define IOP_LOGINFO_CODE_ENCL_MGMT_READ_ACTION_ERR0R (0x00060001) /* Read Action not supported for SEP msg */ @@ -103,6 +108,7 @@ #define PL_LOGINFO_CODE_IO_EXECUTED (0x00140000) #define PL_LOGINFO_CODE_PERS_RESV_OUT_NOT_AFFIL_OWNER (0x00150000) #define PL_LOGINFO_CODE_OPEN_TXDMA_ABORT (0x00160000) +#define PL_LOGINFO_CODE_IO_DEVICE_MISSING_DELAY_RETRY (0x00170000) #define PL_LOGINFO_SUB_CODE_OPEN_FAILURE (0x00000100) #define PL_LOGINFO_SUB_CODE_OPEN_FAILURE_NO_DEST_TIMEOUT (0x00000101) #define PL_LOGINFO_SUB_CODE_OPEN_FAILURE_ORR_TIMEOUT (0x0000011A) /* Open Reject (Retry) Timeout */ @@ -165,11 +171,81 @@ /****************************************************************************/ /* IR LOGINFO_CODE defines, valid if IOC_LOGINFO_ORIGINATOR = IR */ /****************************************************************************/ -#define IR_LOGINFO_CODE_UNUSED1 (0x00010000) -#define IR_LOGINFO_CODE_UNUSED2 (0x00020000) +#define IR_LOGINFO_RAID_ACTION_ERROR (0x00010000) +#define IR_LOGINFO_CODE_UNUSED2 (0x00020000) + +/* Amount of information passed down for Create Volume is too large */ +#define IR_LOGINFO_VOLUME_CREATE_INVALID_LENGTH (0x00010001) +/* Creation of duplicate volume attempted (Bus/Target ID checked) */ +#define IR_LOGINFO_VOLUME_CREATE_DUPLICATE (0x00010002) +/* Creation failed due to maximum number of supported volumes exceeded */ +#define IR_LOGINFO_VOLUME_CREATE_NO_SLOTS (0x00010003) +/* Creation failed due to DMA error in trying to read from host */ +#define IR_LOGINFO_VOLUME_CREATE_DMA_ERROR (0x00010004) +/* Creation failed due to invalid volume type passed down */ +#define IR_LOGINFO_VOLUME_CREATE_INVALID_VOLUME_TYPE (0x00010005) +/* Creation failed due to error reading MFG Page 4 */ +#define IR_LOGINFO_VOLUME_MFG_PAGE4_ERROR (0x00010006) +/* Creation failed when trying to create internal structures */ +#define IR_LOGINFO_VOLUME_INTERNAL_CONFIG_STRUCTURE_ERROR (0x00010007) + +/* Activation failed due to trying to activate an already active volume */ +#define IR_LOGINFO_VOLUME_ACTIVATING_AN_ACTIVE_VOLUME (0x00010010) +/* Activation failed due to trying to active unsupported volume type */ +#define IR_LOGINFO_VOLUME_ACTIVATING_INVALID_VOLUME_TYPE (0x00010011) +/* Activation failed due to trying to active too many volumes */ +#define IR_LOGINFO_VOLUME_ACTIVATING_TOO_MANY_VOLUMES (0x00010012) +/* Activation failed due to Volume ID in use already */ +#define IR_LOGINFO_VOLUME_ACTIVATING_VOLUME_ID_IN_USE (0x00010013) +/* Activation failed call to activateVolume returned failure */ +#define IR_LOGINFO_VOLUME_ACTIVATE_VOLUME_FAILED (0x00010014) +/* Activation failed trying to import the volume */ +#define IR_LOGINFO_VOLUME_ACTIVATING_IMPORT_VOLUME_FAILED (0x00010015) + +/* Phys Disk failed, too many phys disks */ +#define IR_LOGINFO_PHYSDISK_CREATE_TOO_MANY_DISKS (0x00010020) +/* Amount of information passed down for Create Pnysdisk is too large */ +#define IR_LOGINFO_PHYSDISK_CREATE_INVALID_LENGTH (0x00010021) +/* Creation failed due to DMA error in trying to read from host */ +#define IR_LOGINFO_PHYSDISK_CREATE_DMA_ERROR (0x00010022) +/* Creation failed due to invalid Bus TargetID passed down */ +#define IR_LOGINFO_PHYSDISK_CREATE_BUS_TID_INVALID (0x00010023) +/* Creation failed due to error in creating RAID Phys Disk Config Page */ +#define IR_LOGINFO_PHYSDISK_CREATE_CONFIG_PAGE_ERROR (0x00010024) + + +/* Compatibility Error : IR Disabled */ +#define IR_LOGINFO_COMPAT_ERROR_RAID_DISABLED (0x00010030) +/* Compatibility Error : Inquiry Comand failed */ +#define IR_LOGINFO_COMPAT_ERROR_INQUIRY_FAILED (0x00010031) +/* Compatibility Error : Device not direct access device */ +#define IR_LOGINFO_COMPAT_ERROR_NOT_DIRECT_ACCESS (0x00010032) +/* Compatibility Error : Removable device found */ +#define IR_LOGINFO_COMPAT_ERROR_REMOVABLE_FOUND (0x00010033) +/* Compatibility Error : Device SCSI Version not 2 or higher */ +#define IR_LOGINFO_COMPAT_ERROR_NEED_SCSI_2_OR_HIGHER (0x00010034) +/* Compatibility Error : SATA device, 48 BIT LBA not supported */ +#define IR_LOGINFO_COMPAT_ERROR_SATA_48BIT_LBA_NOT_SUPPORTED (0x00010035) +/* Compatibility Error : Device does not have 512 byte block sizes */ +#define IR_LOGINFO_COMPAT_ERROR_DEVICE_NOT_512_BYTE_BLOCK (0x00010036) +/* Compatibility Error : Volume Type check failed */ +#define IR_LOGINFO_COMPAT_ERROR_VOLUME_TYPE_CHECK_FAILED (0x00010037) +/* Compatibility Error : Volume Type is unsupported by FW */ +#define IR_LOGINFO_COMPAT_ERROR_UNSUPPORTED_VOLUME_TYPE (0x00010038) +/* Compatibility Error : Disk drive too small for use in volume */ +#define IR_LOGINFO_COMPAT_ERROR_DISK_TOO_SMALL (0x00010039) +/* Compatibility Error : Phys disk for Create Volume not found */ +#define IR_LOGINFO_COMPAT_ERROR_PHYS_DISK_NOT_FOUND (0x0001003A) +/* Compatibility Error : membership count error, too many or too few disks for volume type */ +#define IR_LOGINFO_COMPAT_ERROR_MEMBERSHIP_COUNT (0x0001003B) +/* Compatibility Error : Disk stripe sizes must be 64KB */ +#define IR_LOGINFO_COMPAT_ERROR_NON_64K_STRIPE_SIZE (0x0001003C) +/* Compatibility Error : IME size limited to < 2TB */ +#define IR_LOGINFO_COMPAT_ERROR_IME_VOL_NOT_CURRENTLY_SUPPORTED (0x0001003D) + /****************************************************************************/ -/* Defines for convienence */ +/* Defines for convenience */ /****************************************************************************/ #define IOC_LOGINFO_PREFIX_IOP ((MPI_IOCLOGINFO_TYPE_SAS << MPI_IOCLOGINFO_TYPE_SHIFT) | IOC_LOGINFO_ORIGINATOR_IOP) #define IOC_LOGINFO_PREFIX_PL ((MPI_IOCLOGINFO_TYPE_SAS << MPI_IOCLOGINFO_TYPE_SHIFT) | IOC_LOGINFO_ORIGINATOR_PL) diff --git a/drivers/message/fusion/lsi/mpi_sas.h b/drivers/message/fusion/lsi/mpi_sas.h index 70514867bddf..50b8f0a8f456 100644 --- a/drivers/message/fusion/lsi/mpi_sas.h +++ b/drivers/message/fusion/lsi/mpi_sas.h @@ -6,7 +6,7 @@ * Title: MPI Serial Attached SCSI structures and definitions * Creation Date: August 19, 2004 * - * mpi_sas.h Version: 01.05.02 + * mpi_sas.h Version: 01.05.03 * * Version History * --------------- @@ -17,6 +17,10 @@ * 08-30-05 01.05.02 Added DeviceInfo bit for SEP. * Added PrimFlags and Primitive field to SAS IO Unit * Control request, and added a new operation code. + * 03-27-06 01.05.03 Added Force Full Discovery, Transmit Port Select Signal, + * and Remove Device operations to SAS IO Unit Control. + * Added DevHandle field to SAS IO Unit Control request and + * reply. * -------------------------------------------------------------------------- */ @@ -209,7 +213,7 @@ typedef struct _MSG_SAS_IOUNIT_CONTROL_REQUEST U8 Reserved1; /* 01h */ U8 ChainOffset; /* 02h */ U8 Function; /* 03h */ - U16 Reserved2; /* 04h */ + U16 DevHandle; /* 04h */ U8 Reserved3; /* 06h */ U8 MsgFlags; /* 07h */ U32 MsgContext; /* 08h */ @@ -231,6 +235,9 @@ typedef struct _MSG_SAS_IOUNIT_CONTROL_REQUEST #define MPI_SAS_OP_PHY_CLEAR_ERROR_LOG (0x08) #define MPI_SAS_OP_MAP_CURRENT (0x09) #define MPI_SAS_OP_SEND_PRIMITIVE (0x0A) +#define MPI_SAS_OP_FORCE_FULL_DISCOVERY (0x0B) +#define MPI_SAS_OP_TRANSMIT_PORT_SELECT_SIGNAL (0x0C) +#define MPI_SAS_OP_TRANSMIT_REMOVE_DEVICE (0x0D) /* values for the PrimFlags field */ #define MPI_SAS_PRIMFLAGS_SINGLE (0x08) @@ -245,7 +252,7 @@ typedef struct _MSG_SAS_IOUNIT_CONTROL_REPLY U8 Reserved1; /* 01h */ U8 MsgLength; /* 02h */ U8 Function; /* 03h */ - U16 Reserved2; /* 04h */ + U16 DevHandle; /* 04h */ U8 Reserved3; /* 06h */ U8 MsgFlags; /* 07h */ U32 MsgContext; /* 08h */ diff --git a/drivers/message/fusion/lsi/mpi_targ.h b/drivers/message/fusion/lsi/mpi_targ.h index 3f462859ceea..20b667315773 100644 --- a/drivers/message/fusion/lsi/mpi_targ.h +++ b/drivers/message/fusion/lsi/mpi_targ.h @@ -6,7 +6,7 @@ * Title: MPI Target mode messages and structures * Creation Date: June 22, 2000 * - * mpi_targ.h Version: 01.05.05 + * mpi_targ.h Version: 01.05.06 * * Version History * --------------- @@ -54,6 +54,7 @@ * 02-22-05 01.05.03 Changed a comment. * 03-11-05 01.05.04 Removed TargetAssistExtended Request. * 06-24-05 01.05.05 Added TargetAssistExtended structures and defines. + * 03-27-06 01.05.06 Added a comment. * -------------------------------------------------------------------------- */ @@ -351,7 +352,7 @@ typedef struct _MSG_TARGET_ASSIST_REQUEST #define TARGET_ASSIST_FLAGS_CONFIRMED (0x08) #define TARGET_ASSIST_FLAGS_REPOST_CMD_BUFFER (0x80) - +/* Standard Target Mode Reply message */ typedef struct _MSG_TARGET_ERROR_REPLY { U16 Reserved; /* 00h */ |