13 files changed, 1484 insertions, 56 deletions

diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig
index 79078b8f5697..8951cefb0a96 100644
--- a/drivers/acpi/Kconfig
+++ b/drivers/acpi/Kconfig
@@ -393,4 +393,27 @@ config ACPI_EXTLOG
 	  driver adds support for that functionality with corresponding
 	  tracepoint which carries that information to userspace.
 
+menuconfig PMIC_OPREGION
+	bool "PMIC (Power Management Integrated Circuit) operation region support"
+	help
+	  Select this option to enable support for ACPI operation
+	  region of the PMIC chip. The operation region can be used
+	  to control power rails and sensor reading/writing on the
+	  PMIC chip.
+
+if PMIC_OPREGION
+config CRC_PMIC_OPREGION
+	bool "ACPI operation region support for CrystalCove PMIC"
+	depends on INTEL_SOC_PMIC
+	help
+	  This config adds ACPI operation region support for CrystalCove PMIC.
+
+config XPOWER_PMIC_OPREGION
+	bool "ACPI operation region support for XPower AXP288 PMIC"
+	depends on AXP288_ADC = y
+	help
+	  This config adds ACPI operation region support for XPower AXP288 PMIC.
+
+endif
+
 endif	# ACPI
diff --git a/drivers/acpi/Makefile b/drivers/acpi/Makefile
index 6d11522f0e48..f74317cc1ca9 100644
--- a/drivers/acpi/Makefile
+++ b/drivers/acpi/Makefile
@@ -88,3 +88,7 @@ obj-$(CONFIG_ACPI_PROCESSOR_AGGREGATOR) += acpi_pad.o
 obj-$(CONFIG_ACPI_APEI)		+= apei/
 
 obj-$(CONFIG_ACPI_EXTLOG)	+= acpi_extlog.o
+
+obj-$(CONFIG_PMIC_OPREGION)	+= pmic/intel_pmic.o
+obj-$(CONFIG_CRC_PMIC_OPREGION) += pmic/intel_pmic_crc.o
+obj-$(CONFIG_XPOWER_PMIC_OPREGION) += pmic/intel_pmic_xpower.o
diff --git a/drivers/acpi/pmic/intel_pmic.c b/drivers/acpi/pmic/intel_pmic.c
new file mode 100644
index 000000000000..a732e5d7e322
--- /dev/null
+++ b/drivers/acpi/pmic/intel_pmic.c
@@ -0,0 +1,354 @@
+/*
+ * intel_pmic.c - Intel PMIC operation region driver
+ *
+ * Copyright (C) 2014 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/acpi.h>
+#include <linux/regmap.h>
+#include "intel_pmic.h"
+
+#define PMIC_POWER_OPREGION_ID		0x8d
+#define PMIC_THERMAL_OPREGION_ID	0x8c
+
+struct acpi_lpat {
+	int temp;
+	int raw;
+};
+
+struct intel_pmic_opregion {
+	struct mutex lock;
+	struct acpi_lpat *lpat;
+	int lpat_count;
+	struct regmap *regmap;
+	struct intel_pmic_opregion_data *data;
+};
+
+static int pmic_get_reg_bit(int address, struct pmic_table *table,
+			    int count, int *reg, int *bit)
+{
+	int i;
+
+	for (i = 0; i < count; i++) {
+		if (table[i].address == address) {
+			*reg = table[i].reg;
+			if (bit)
+				*bit = table[i].bit;
+			return 0;
+		}
+	}
+	return -ENOENT;
+}
+
+/**
+ * raw_to_temp(): Return temperature from raw value through LPAT table
+ *
+ * @lpat: the temperature_raw mapping table
+ * @count: the count of the above mapping table
+ * @raw: the raw value, used as a key to get the temerature from the
+ *       above mapping table
+ *
+ * A positive value will be returned on success, a negative errno will
+ * be returned in error cases.
+ */
+static int raw_to_temp(struct acpi_lpat *lpat, int count, int raw)
+{
+	int i, delta_temp, delta_raw, temp;
+
+	for (i = 0; i < count - 1; i++) {
+		if ((raw >= lpat[i].raw && raw <= lpat[i+1].raw) ||
+		    (raw <= lpat[i].raw && raw >= lpat[i+1].raw))
+			break;
+	}
+
+	if (i == count - 1)
+		return -ENOENT;
+
+	delta_temp = lpat[i+1].temp - lpat[i].temp;
+	delta_raw = lpat[i+1].raw - lpat[i].raw;
+	temp = lpat[i].temp + (raw - lpat[i].raw) * delta_temp / delta_raw;
+
+	return temp;
+}
+
+/**
+ * temp_to_raw(): Return raw value from temperature through LPAT table
+ *
+ * @lpat: the temperature_raw mapping table
+ * @count: the count of the above mapping table
+ * @temp: the temperature, used as a key to get the raw value from the
+ *        above mapping table
+ *
+ * A positive value will be returned on success, a negative errno will
+ * be returned in error cases.
+ */
+static int temp_to_raw(struct acpi_lpat *lpat, int count, int temp)
+{
+	int i, delta_temp, delta_raw, raw;
+
+	for (i = 0; i < count - 1; i++) {
+		if (temp >= lpat[i].temp && temp <= lpat[i+1].temp)
+			break;
+	}
+
+	if (i == count - 1)
+		return -ENOENT;
+
+	delta_temp = lpat[i+1].temp - lpat[i].temp;
+	delta_raw = lpat[i+1].raw - lpat[i].raw;
+	raw = lpat[i].raw + (temp - lpat[i].temp) * delta_raw / delta_temp;
+
+	return raw;
+}
+
+static void pmic_thermal_lpat(struct intel_pmic_opregion *opregion,
+			      acpi_handle handle, struct device *dev)
+{
+	struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
+	union acpi_object *obj_p, *obj_e;
+	int *lpat, i;
+	acpi_status status;
+
+	status = acpi_evaluate_object(handle, "LPAT", NULL, &buffer);
+	if (ACPI_FAILURE(status))
+		return;
+
+	obj_p = (union acpi_object *)buffer.pointer;
+	if (!obj_p || (obj_p->type != ACPI_TYPE_PACKAGE) ||
+	    (obj_p->package.count % 2) || (obj_p->package.count < 4))
+		goto out;
+
+	lpat = devm_kmalloc(dev, sizeof(int) * obj_p->package.count,
+			    GFP_KERNEL);
+	if (!lpat)
+		goto out;
+
+	for (i = 0; i < obj_p->package.count; i++) {
+		obj_e = &obj_p->package.elements[i];
+		if (obj_e->type != ACPI_TYPE_INTEGER) {
+			devm_kfree(dev, lpat);
+			goto out;
+		}
+		lpat[i] = (s64)obj_e->integer.value;
+	}
+
+	opregion->lpat = (struct acpi_lpat *)lpat;
+	opregion->lpat_count = obj_p->package.count / 2;
+
+out:
+	kfree(buffer.pointer);
+}
+
+static acpi_status intel_pmic_power_handler(u32 function,
+		acpi_physical_address address, u32 bits, u64 *value64,
+		void *handler_context, void *region_context)
+{
+	struct intel_pmic_opregion *opregion = region_context;
+	struct regmap *regmap = opregion->regmap;
+	struct intel_pmic_opregion_data *d = opregion->data;
+	int reg, bit, result;
+
+	if (bits != 32 || !value64)
+		return AE_BAD_PARAMETER;
+
+	if (function == ACPI_WRITE && !(*value64 == 0 || *value64 == 1))
+		return AE_BAD_PARAMETER;
+
+	result = pmic_get_reg_bit(address, d->power_table,
+				  d->power_table_count, &reg, &bit);
+	if (result == -ENOENT)
+		return AE_BAD_PARAMETER;
+
+	mutex_lock(&opregion->lock);
+
+	result = function == ACPI_READ ?
+		d->get_power(regmap, reg, bit, value64) :
+		d->update_power(regmap, reg, bit, *value64 == 1);
+
+	mutex_unlock(&opregion->lock);
+
+	return result ? AE_ERROR : AE_OK;
+}
+
+static int pmic_read_temp(struct intel_pmic_opregion *opregion,
+			  int reg, u64 *value)
+{
+	int raw_temp, temp;
+
+	if (!opregion->data->get_raw_temp)
+		return -ENXIO;
+
+	raw_temp = opregion->data->get_raw_temp(opregion->regmap, reg);
+	if (raw_temp < 0)
+		return raw_temp;
+
+	if (!opregion->lpat) {
+		*value = raw_temp;
+		return 0;
+	}
+
+	temp = raw_to_temp(opregion->lpat, opregion->lpat_count, raw_temp);
+	if (temp < 0)
+		return temp;
+
+	*value = temp;
+	return 0;
+}
+
+static int pmic_thermal_temp(struct intel_pmic_opregion *opregion, int reg,
+			     u32 function, u64 *value)
+{
+	return function == ACPI_READ ?
+		pmic_read_temp(opregion, reg, value) : -EINVAL;
+}
+
+static int pmic_thermal_aux(struct intel_pmic_opregion *opregion, int reg,
+			    u32 function, u64 *value)
+{
+	int raw_temp;
+
+	if (function == ACPI_READ)
+		return pmic_read_temp(opregion, reg, value);
+
+	if (!opregion->data->update_aux)
+		return -ENXIO;
+
+	if (opregion->lpat) {
+		raw_temp = temp_to_raw(opregion->lpat, opregion->lpat_count,
+				       *value);
+		if (raw_temp < 0)
+			return raw_temp;
+	} else {
+		raw_temp = *value;
+	}
+
+	return opregion->data->update_aux(opregion->regmap, reg, raw_temp);
+}
+
+static int pmic_thermal_pen(struct intel_pmic_opregion *opregion, int reg,
+			    u32 function, u64 *value)
+{
+	struct intel_pmic_opregion_data *d = opregion->data;
+	struct regmap *regmap = opregion->regmap;
+
+	if (!d->get_policy || !d->update_policy)
+		return -ENXIO;
+
+	if (function == ACPI_READ)
+		return d->get_policy(regmap, reg, value);
+
+	if (*value != 0 && *value != 1)
+		return -EINVAL;
+
+	return d->update_policy(regmap, reg, *value);
+}
+
+static bool pmic_thermal_is_temp(int address)
+{
+	return (address <= 0x3c) && !(address % 12);
+}
+
+static bool pmic_thermal_is_aux(int address)
+{
+	return (address >= 4 && address <= 0x40 && !((address - 4) % 12)) ||
+	       (address >= 8 && address <= 0x44 && !((address - 8) % 12));
+}
+
+static bool pmic_thermal_is_pen(int address)
+{
+	return address >= 0x48 && address <= 0x5c;
+}
+
+static acpi_status intel_pmic_thermal_handler(u32 function,
+		acpi_physical_address address, u32 bits, u64 *value64,
+		void *handler_context, void *region_context)
+{
+	struct intel_pmic_opregion *opregion = region_context;
+	struct intel_pmic_opregion_data *d = opregion->data;
+	int reg, result;
+
+	if (bits != 32 || !value64)
+		return AE_BAD_PARAMETER;
+
+	result = pmic_get_reg_bit(address, d->thermal_table,
+				  d->thermal_table_count, &reg, NULL);
+	if (result == -ENOENT)
+		return AE_BAD_PARAMETER;
+
+	mutex_lock(&opregion->lock);
+
+	if (pmic_thermal_is_temp(address))
+		result = pmic_thermal_temp(opregion, reg, function, value64);
+	else if (pmic_thermal_is_aux(address))
+		result = pmic_thermal_aux(opregion, reg, function, value64);
+	else if (pmic_thermal_is_pen(address))
+		result = pmic_thermal_pen(opregion, reg, function, value64);
+	else
+		result = -EINVAL;
+
+	mutex_unlock(&opregion->lock);
+
+	if (result < 0) {
+		if (result == -EINVAL)
+			return AE_BAD_PARAMETER;
+		else
+			return AE_ERROR;
+	}
+
+	return AE_OK;
+}
+
+int intel_pmic_install_opregion_handler(struct device *dev, acpi_handle handle,
+					struct regmap *regmap,
+					struct intel_pmic_opregion_data *d)
+{
+	acpi_status status;
+	struct intel_pmic_opregion *opregion;
+
+	if (!dev || !regmap || !d)
+		return -EINVAL;
+
+	if (!handle)
+		return -ENODEV;
+
+	opregion = devm_kzalloc(dev, sizeof(*opregion), GFP_KERNEL);
+	if (!opregion)
+		return -ENOMEM;
+
+	mutex_init(&opregion->lock);
+	opregion->regmap = regmap;
+	pmic_thermal_lpat(opregion, handle, dev);
+
+	status = acpi_install_address_space_handler(handle,
+						    PMIC_POWER_OPREGION_ID,
+						    intel_pmic_power_handler,
+						    NULL, opregion);
+	if (ACPI_FAILURE(status))
+		return -ENODEV;
+
+	status = acpi_install_address_space_handler(handle,
+						    PMIC_THERMAL_OPREGION_ID,
+						    intel_pmic_thermal_handler,
+						    NULL, opregion);
+	if (ACPI_FAILURE(status)) {
+		acpi_remove_address_space_handler(handle, PMIC_POWER_OPREGION_ID,
+						  intel_pmic_power_handler);
+		return -ENODEV;
+	}
+
+	opregion->data = d;
+	return 0;
+}
+EXPORT_SYMBOL_GPL(intel_pmic_install_opregion_handler);
+
+MODULE_LICENSE("GPL");
diff --git a/drivers/acpi/pmic/intel_pmic.h b/drivers/acpi/pmic/intel_pmic.h
new file mode 100644
index 000000000000..d4e90af8f0dd
--- /dev/null
+++ b/drivers/acpi/pmic/intel_pmic.h
@@ -0,0 +1,25 @@
+#ifndef __INTEL_PMIC_H
+#define __INTEL_PMIC_H
+
+struct pmic_table {
+	int address;	/* operation region address */
+	int reg;	/* corresponding thermal register */
+	int bit;	/* control bit for power */
+};
+
+struct intel_pmic_opregion_data {
+	int (*get_power)(struct regmap *r, int reg, int bit, u64 *value);
+	int (*update_power)(struct regmap *r, int reg, int bit, bool on);
+	int (*get_raw_temp)(struct regmap *r, int reg);
+	int (*update_aux)(struct regmap *r, int reg, int raw_temp);
+	int (*get_policy)(struct regmap *r, int reg, u64 *value);
+	int (*update_policy)(struct regmap *r, int reg, int enable);
+	struct pmic_table *power_table;
+	int power_table_count;
+	struct pmic_table *thermal_table;
+	int thermal_table_count;
+};
+
+int intel_pmic_install_opregion_handler(struct device *dev, acpi_handle handle, struct regmap *regmap, struct intel_pmic_opregion_data *d);
+
+#endif
diff --git a/drivers/acpi/pmic/intel_pmic_crc.c b/drivers/acpi/pmic/intel_pmic_crc.c
new file mode 100644
index 000000000000..ef7d8ff95abe
--- /dev/null
+++ b/drivers/acpi/pmic/intel_pmic_crc.c
@@ -0,0 +1,211 @@
+/*
+ * intel_pmic_crc.c - Intel CrystalCove PMIC operation region driver
+ *
+ * Copyright (C) 2014 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/acpi.h>
+#include <linux/mfd/intel_soc_pmic.h>
+#include <linux/regmap.h>
+#include <linux/platform_device.h>
+#include "intel_pmic.h"
+
+#define PWR_SOURCE_SELECT	BIT(1)
+
+#define PMIC_A0LOCK_REG		0xc5
+
+static struct pmic_table power_table[] = {
+	{
+		.address = 0x24,
+		.reg = 0x66,
+		.bit = 0x00,
+	},
+	{
+		.address = 0x48,
+		.reg = 0x5d,
+		.bit = 0x00,
+	},
+};
+
+static struct pmic_table thermal_table[] = {
+	{
+		.address = 0x00,
+		.reg = 0x75
+	},
+	{
+		.address = 0x04,
+		.reg = 0x95
+	},
+	{
+		.address = 0x08,
+		.reg = 0x97
+	},
+	{
+		.address = 0x0c,
+		.reg = 0x77
+	},
+	{
+		.address = 0x10,
+		.reg = 0x9a
+	},
+	{
+		.address = 0x14,
+		.reg = 0x9c
+	},
+	{
+		.address = 0x18,
+		.reg = 0x79
+	},
+	{
+		.address = 0x1c,
+		.reg = 0x9f
+	},
+	{
+		.address = 0x20,
+		.reg = 0xa1
+	},
+	{
+		.address = 0x48,
+		.reg = 0x94
+	},
+	{
+		.address = 0x4c,
+		.reg = 0x99
+	},
+	{
+		.address = 0x50,
+		.reg = 0x9e
+	},
+};
+
+static int intel_crc_pmic_get_power(struct regmap *regmap, int reg,
+				    int bit, u64 *value)
+{
+	int data;
+
+	if (regmap_read(regmap, reg, &data))
+		return -EIO;
+
+	*value = (data & PWR_SOURCE_SELECT) && (data & BIT(bit)) ? 1 : 0;
+	return 0;
+}
+
+static int intel_crc_pmic_update_power(struct regmap *regmap, int reg,
+				       int bit, bool on)
+{
+	int data;
+
+	if (regmap_read(regmap, reg, &data))
+		return -EIO;
+
+	if (on) {
+		data |= PWR_SOURCE_SELECT | BIT(bit);
+	} else {
+		data &= ~BIT(bit);
+		data |= PWR_SOURCE_SELECT;
+	}
+
+	if (regmap_write(regmap, reg, data))
+		return -EIO;
+	return 0;
+}
+
+static int intel_crc_pmic_get_raw_temp(struct regmap *regmap, int reg)
+{
+	int temp_l, temp_h;
+
+	/*
+	 * Raw temperature value is 10bits: 8bits in reg
+	 * and 2bits in reg-1: bit0,1
+	 */
+	if (regmap_read(regmap, reg, &temp_l) ||
+	    regmap_read(regmap, reg - 1, &temp_h))
+		return -EIO;
+
+	return temp_l | (temp_h & 0x3) << 8;
+}
+
+static int intel_crc_pmic_update_aux(struct regmap *regmap, int reg, int raw)
+{
+	return regmap_write(regmap, reg, raw) ||
+		regmap_update_bits(regmap, reg - 1, 0x3, raw >> 8) ? -EIO : 0;
+}
+
+static int intel_crc_pmic_get_policy(struct regmap *regmap, int reg, u64 *value)
+{
+	int pen;
+
+	if (regmap_read(regmap, reg, &pen))
+		return -EIO;
+	*value = pen >> 7;
+	return 0;
+}
+
+static int intel_crc_pmic_update_policy(struct regmap *regmap,
+					int reg, int enable)
+{
+	int alert0;
+
+	/* Update to policy enable bit requires unlocking a0lock */
+	if (regmap_read(regmap, PMIC_A0LOCK_REG, &alert0))
+		return -EIO;
+
+	if (regmap_update_bits(regmap, PMIC_A0LOCK_REG, 0x01, 0))
+		return -EIO;
+
+	if (regmap_update_bits(regmap, reg, 0x80, enable << 7))
+		return -EIO;
+
+	/* restore alert0 */
+	if (regmap_write(regmap, PMIC_A0LOCK_REG, alert0))
+		return -EIO;
+
+	return 0;
+}
+
+static struct intel_pmic_opregion_data intel_crc_pmic_opregion_data = {
+	.get_power	= intel_crc_pmic_get_power,
+	.update_power	= intel_crc_pmic_update_power,
+	.get_raw_temp	= intel_crc_pmic_get_raw_temp,
+	.update_aux	= intel_crc_pmic_update_aux,
+	.get_policy	= intel_crc_pmic_get_policy,
+	.update_policy	= intel_crc_pmic_update_policy,
+	.power_table	= power_table,
+	.power_table_count= ARRAY_SIZE(power_table),
+	.thermal_table	= thermal_table,
+	.thermal_table_count = ARRAY_SIZE(thermal_table),
+};
+
+static int intel_crc_pmic_opregion_probe(struct platform_device *pdev)
+{
+	struct intel_soc_pmic *pmic = dev_get_drvdata(pdev->dev.parent);
+	return intel_pmic_install_opregion_handler(&pdev->dev,
+			ACPI_HANDLE(pdev->dev.parent), pmic->regmap,
+			&intel_crc_pmic_opregion_data);
+}
+
+static struct platform_driver intel_crc_pmic_opregion_driver = {
+	.probe = intel_crc_pmic_opregion_probe,
+	.driver = {
+		.name = "crystal_cove_pmic",
+	},
+};
+
+static int __init intel_crc_pmic_opregion_driver_init(void)
+{
+	return platform_driver_register(&intel_crc_pmic_opregion_driver);
+}
+module_init(intel_crc_pmic_opregion_driver_init);
+
+MODULE_DESCRIPTION("CrystalCove ACPI opration region driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/acpi/pmic/intel_pmic_xpower.c b/drivers/acpi/pmic/intel_pmic_xpower.c
new file mode 100644
index 000000000000..6a082d4de12c
--- /dev/null
+++ b/drivers/acpi/pmic/intel_pmic_xpower.c
@@ -0,0 +1,268 @@
+/*
+ * intel_pmic_xpower.c - XPower AXP288 PMIC operation region driver
+ *
+ * Copyright (C) 2014 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/acpi.h>
+#include <linux/mfd/axp20x.h>
+#include <linux/regmap.h>
+#include <linux/platform_device.h>
+#include <linux/iio/consumer.h>
+#include "intel_pmic.h"
+
+#define XPOWER_GPADC_LOW	0x5b
+
+static struct pmic_table power_table[] = {
+	{
+		.address = 0x00,
+		.reg = 0x13,
+		.bit = 0x05,
+	},
+	{
+		.address = 0x04,
+		.reg = 0x13,
+		.bit = 0x06,
+	},
+	{
+		.address = 0x08,
+		.reg = 0x13,
+		.bit = 0x07,
+	},
+	{
+		.address = 0x0c,
+		.reg = 0x12,
+		.bit = 0x03,
+	},
+	{
+		.address = 0x10,
+		.reg = 0x12,
+		.bit = 0x04,
+	},
+	{
+		.address = 0x14,
+		.reg = 0x12,
+		.bit = 0x05,
+	},
+	{
+		.address = 0x18,
+		.reg = 0x12,
+		.bit = 0x06,
+	},
+	{
+		.address = 0x1c,
+		.reg = 0x12,
+		.bit = 0x00,
+	},
+	{
+		.address = 0x20,
+		.reg = 0x12,
+		.bit = 0x01,
+	},
+	{
+		.address = 0x24,
+		.reg = 0x12,
+		.bit = 0x02,
+	},
+	{
+		.address = 0x28,
+		.reg = 0x13,
+		.bit = 0x02,
+	},
+	{
+		.address = 0x2c,
+		.reg = 0x13,
+		.bit = 0x03,
+	},
+	{
+		.address = 0x30,
+		.reg = 0x13,
+		.bit = 0x04,
+	},
+	{
+		.address = 0x38,
+		.reg = 0x10,
+		.bit = 0x03,
+	},
+	{
+		.address = 0x3c,
+		.reg = 0x10,
+		.bit = 0x06,
+	},
+	{
+		.address = 0x40,
+		.reg = 0x10,
+		.bit = 0x05,
+	},
+	{
+		.address = 0x44,
+		.reg = 0x10,
+		.bit = 0x04,
+	},
+	{
+		.address = 0x48,
+		.reg = 0x10,
+		.bit = 0x01,
+	},
+	{
+		.address = 0x4c,
+		.reg = 0x10,
+		.bit = 0x00
+	},
+};
+
+/* TMP0 - TMP5 are the same, all from GPADC */
+static struct pmic_table thermal_table[] = {
+	{
+		.address = 0x00,
+		.reg = XPOWER_GPADC_LOW
+	},
+	{
+		.address = 0x0c,
+		.reg = XPOWER_GPADC_LOW
+	},
+	{
+		.address = 0x18,
+		.reg = XPOWER_GPADC_LOW
+	},
+	{
+		.address = 0x24,
+		.reg = XPOWER_GPADC_LOW
+	},
+	{
+		.address = 0x30,
+		.reg = XPOWER_GPADC_LOW
+	},
+	{
+		.address = 0x3c,
+		.reg = XPOWER_GPADC_LOW
+	},
+};
+
+static int intel_xpower_pmic_get_power(struct regmap *regmap, int reg,
+				       int bit, u64 *value)
+{
+	int data;
+
+	if (regmap_read(regmap, reg, &data))
+		return -EIO;
+
+	*value = (data & BIT(bit)) ? 1 : 0;
+	return 0;
+}
+
+static int intel_xpower_pmic_update_power(struct regmap *regmap, int reg,
+					  int bit, bool on)
+{
+	int data;
+
+	if (regmap_read(regmap, reg, &data))
+		return -EIO;
+
+	if (on)
+		data |= BIT(bit);
+	else
+		data &= ~BIT(bit);
+
+	if (regmap_write(regmap, reg, data))
+		return -EIO;
+
+	return 0;
+}
+
+/**
+ * intel_xpower_pmic_get_raw_temp(): Get raw temperature reading from the PMIC
+ *
+ * @regmap: regmap of the PMIC device
+ * @reg: register to get the reading
+ *
+ * We could get the sensor value by manipulating the HW regs here, but since
+ * the axp288 IIO driver may also access the same regs at the same time, the
+ * APIs provided by IIO subsystem are used here instead to avoid problems. As
+ * a result, the two passed in params are of no actual use.
+ *
+ * Return a positive value on success, errno on failure.
+ */
+static int intel_xpower_pmic_get_raw_temp(struct regmap *regmap, int reg)
+{
+	struct iio_channel *gpadc_chan;
+	int ret, val;
+
+	gpadc_chan = iio_channel_get(NULL, "axp288-system-temp");
+	if (IS_ERR_OR_NULL(gpadc_chan))
+		return -EACCES;
+
+	ret = iio_read_channel_raw(gpadc_chan, &val);
+	if (ret < 0)
+		val = ret;
+
+	iio_channel_release(gpadc_chan);
+	return val;
+}
+
+static struct intel_pmic_opregion_data intel_xpower_pmic_opregion_data = {
+	.get_power = intel_xpower_pmic_get_power,
+	.update_power = intel_xpower_pmic_update_power,
+	.get_raw_temp = intel_xpower_pmic_get_raw_temp,
+	.power_table = power_table,
+	.power_table_count = ARRAY_SIZE(power_table),
+	.thermal_table = thermal_table,
+	.thermal_table_count = ARRAY_SIZE(thermal_table),
+};
+
+static acpi_status intel_xpower_pmic_gpio_handler(u32 function,
+		acpi_physical_address address, u32 bit_width, u64 *value,
+		void *handler_context, void *region_context)
+{
+	return AE_OK;
+}
+
+static int intel_xpower_pmic_opregion_probe(struct platform_device *pdev)
+{
+	struct device *parent = pdev->dev.parent;
+	struct axp20x_dev *axp20x = dev_get_drvdata(parent);
+	acpi_status status;
+	int result;
+
+	status = acpi_install_address_space_handler(ACPI_HANDLE(parent),
+			ACPI_ADR_SPACE_GPIO, intel_xpower_pmic_gpio_handler,
+			NULL, NULL);
+	if (ACPI_FAILURE(status))
+		return -ENODEV;
+
+	result = intel_pmic_install_opregion_handler(&pdev->dev,
+					ACPI_HANDLE(parent), axp20x->regmap,
+					&intel_xpower_pmic_opregion_data);
+	if (result)
+		acpi_remove_address_space_handler(ACPI_HANDLE(parent),
+						  ACPI_ADR_SPACE_GPIO,
+						  intel_xpower_pmic_gpio_handler);
+
+	return result;
+}
+
+static struct platform_driver intel_xpower_pmic_opregion_driver = {
+	.probe = intel_xpower_pmic_opregion_probe,
+	.driver = {
+		.name = "axp288_pmic_acpi",
+	},
+};
+
+static int __init intel_xpower_pmic_opregion_driver_init(void)
+{
+	return platform_driver_register(&intel_xpower_pmic_opregion_driver);
+}
+module_init(intel_xpower_pmic_opregion_driver_init);
+
+MODULE_DESCRIPTION("XPower AXP288 ACPI operation region driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c
index 9d75ead2a1f9..185a57d13723 100644
--- a/drivers/acpi/video.c
+++ b/drivers/acpi/video.c
@@ -1681,6 +1681,19 @@ static void acpi_video_dev_register_backlight(struct acpi_video_device *device)
 		printk(KERN_ERR PREFIX "Create sysfs link\n");
 }
 
+static void acpi_video_run_bcl_for_osi(struct acpi_video_bus *video)
+{
+	struct acpi_video_device *dev;
+	union acpi_object *levels;
+
+	mutex_lock(&video->device_list_lock);
+	list_for_each_entry(dev, &video->video_device_list, entry) {
+		if (!acpi_video_device_lcd_query_levels(dev, &levels))
+			kfree(levels);
+	}
+	mutex_unlock(&video->device_list_lock);
+}
+
 static int acpi_video_bus_register_backlight(struct acpi_video_bus *video)
 {
 	struct acpi_video_device *dev;
@@ -1688,6 +1701,8 @@ static int acpi_video_bus_register_backlight(struct acpi_video_bus *video)
 	if (video->backlight_registered)
 		return 0;
 
+	acpi_video_run_bcl_for_osi(video);
+
 	if (!acpi_video_verify_backlight_support())
 		return 0;
 
diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig
index 88bdc8f612e2..bc4e787096e8 100644
--- a/drivers/iio/adc/Kconfig
+++ b/drivers/iio/adc/Kconfig
@@ -127,6 +127,14 @@ config AT91_ADC
 	help
 	  Say yes here to build support for Atmel AT91 ADC.
 
+config AXP288_ADC
+	tristate "X-Powers AXP288 ADC driver"
+	depends on MFD_AXP20X
+	help
+	  Say yes here to have support for X-Powers power management IC (PMIC) ADC
+	  device. Depending on platform configuration, this general purpose ADC can
+	  be used for sampling sensors such as thermal resistors.
+
 config EXYNOS_ADC
 	tristate "Exynos ADC driver support"
 	depends on ARCH_EXYNOS || ARCH_S3C24XX || ARCH_S3C64XX || (OF && COMPILE_TEST)
diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile
index cb88a6a23b8f..f30093f5b67a 100644
--- a/drivers/iio/adc/Makefile
+++ b/drivers/iio/adc/Makefile
@@ -14,6 +14,7 @@ obj-$(CONFIG_AD7793) += ad7793.o
 obj-$(CONFIG_AD7887) += ad7887.o
 obj-$(CONFIG_AD799X) += ad799x.o
 obj-$(CONFIG_AT91_ADC) += at91_adc.o
+obj-$(CONFIG_AXP288_ADC) += axp288_adc.o
 obj-$(CONFIG_EXYNOS_ADC) += exynos_adc.o
 obj-$(CONFIG_LP8788_ADC) += lp8788_adc.o
 obj-$(CONFIG_MAX1027) += max1027.o
diff --git a/drivers/iio/adc/axp288_adc.c b/drivers/iio/adc/axp288_adc.c
new file mode 100644
index 000000000000..08bcfb061ca5
--- /dev/null
+++ b/drivers/iio/adc/axp288_adc.c
@@ -0,0 +1,261 @@
+/*
+ * axp288_adc.c - X-Powers AXP288 PMIC ADC Driver
+ *
+ * Copyright (C) 2014 Intel Corporation
+ *
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	See the GNU
+ * General Public License for more details.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/regmap.h>
+#include <linux/mfd/axp20x.h>
+#include <linux/platform_device.h>
+
+#include <linux/iio/iio.h>
+#include <linux/iio/machine.h>
+#include <linux/iio/driver.h>
+
+#define AXP288_ADC_EN_MASK		0xF1
+#define AXP288_ADC_TS_PIN_GPADC		0xF2
+#define AXP288_ADC_TS_PIN_ON		0xF3
+
+enum axp288_adc_id {
+	AXP288_ADC_TS,
+	AXP288_ADC_PMIC,
+	AXP288_ADC_GP,
+	AXP288_ADC_BATT_CHRG_I,
+	AXP288_ADC_BATT_DISCHRG_I,
+	AXP288_ADC_BATT_V,
+	AXP288_ADC_NR_CHAN,
+};
+
+struct axp288_adc_info {
+	int irq;
+	struct regmap *regmap;
+};
+
+static const struct iio_chan_spec const axp288_adc_channels[] = {
+	{
+		.indexed = 1,
+		.type = IIO_TEMP,
+		.channel = 0,
+		.address = AXP288_TS_ADC_H,
+		.datasheet_name = "TS_PIN",
+	}, {
+		.indexed = 1,
+		.type = IIO_TEMP,
+		.channel = 1,
+		.address = AXP288_PMIC_ADC_H,
+		.datasheet_name = "PMIC_TEMP",
+	}, {
+		.indexed = 1,
+		.type = IIO_TEMP,
+		.channel = 2,
+		.address = AXP288_GP_ADC_H,
+		.datasheet_name = "GPADC",
+	}, {
+		.indexed = 1,
+		.type = IIO_CURRENT,
+		.channel = 3,
+		.address = AXP20X_BATT_CHRG_I_H,
+		.datasheet_name = "BATT_CHG_I",
+		.info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED),
+	}, {
+		.indexed = 1,
+		.type = IIO_CURRENT,
+		.channel = 4,
+		.address = AXP20X_BATT_DISCHRG_I_H,
+		.datasheet_name = "BATT_DISCHRG_I",
+		.info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED),
+	}, {
+		.indexed = 1,
+		.type = IIO_VOLTAGE,
+		.channel = 5,
+		.address = AXP20X_BATT_V_H,
+		.datasheet_name = "BATT_V",
+		.info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED),
+	},
+};
+
+#define AXP288_ADC_MAP(_adc_channel_label, _consumer_dev_name,	\
+		_consumer_channel)				\
+	{							\
+		.adc_channel_label = _adc_channel_label,	\
+		.consumer_dev_name = _consumer_dev_name,	\
+		.consumer_channel = _consumer_channel,		\
+	}
+
+/* for consumer drivers */
+static struct iio_map axp288_adc_default_maps[] = {
+	AXP288_ADC_MAP("TS_PIN", "axp288-batt", "axp288-batt-temp"),
+	AXP288_ADC_MAP("PMIC_TEMP", "axp288-pmic", "axp288-pmic-temp"),
+	AXP288_ADC_MAP("GPADC", "axp288-gpadc", "axp288-system-temp"),
+	AXP288_ADC_MAP("BATT_CHG_I", "axp288-chrg", "axp288-chrg-curr"),
+	AXP288_ADC_MAP("BATT_DISCHRG_I", "axp288-chrg", "axp288-chrg-d-curr"),
+	AXP288_ADC_MAP("BATT_V", "axp288-batt", "axp288-batt-volt"),
+	{},
+};
+
+static int axp288_adc_read_channel(int *val, unsigned long address,
+				struct regmap *regmap)
+{
+	u8 buf[2];
+
+	if (regmap_bulk_read(regmap, address, buf, 2))
+		return -EIO;
+	*val = (buf[0] << 4) + ((buf[1] >> 4) & 0x0F);
+
+	return IIO_VAL_INT;
+}
+
+static int axp288_adc_set_ts(struct regmap *regmap, unsigned int mode,
+				unsigned long address)
+{
+	/* channels other than GPADC do not need to switch TS pin */
+	if (address != AXP288_GP_ADC_H)
+		return 0;
+
+	return regmap_write(regmap, AXP288_ADC_TS_PIN_CTRL, mode);
+}
+
+static int axp288_adc_read_raw(struct iio_dev *indio_dev,
+			struct iio_chan_spec const *chan,
+			int *val, int *val2, long mask)
+{
+	int ret;
+	struct axp288_adc_info *info = iio_priv(indio_dev);
+
+	mutex_lock(&indio_dev->mlock);
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		if (axp288_adc_set_ts(info->regmap, AXP288_ADC_TS_PIN_GPADC,
+					chan->address)) {
+			dev_err(&indio_dev->dev, "GPADC mode\n");
+			ret = -EINVAL;
+			break;
+		}
+		ret = axp288_adc_read_channel(val, chan->address, info->regmap);
+		if (axp288_adc_set_ts(info->regmap, AXP288_ADC_TS_PIN_ON,
+						chan->address))
+			dev_err(&indio_dev->dev, "TS pin restore\n");
+		break;
+	case IIO_CHAN_INFO_PROCESSED:
+		ret = axp288_adc_read_channel(val, chan->address, info->regmap);
+		break;
+	default:
+		ret = -EINVAL;
+	}
+	mutex_unlock(&indio_dev->mlock);
+
+	return ret;
+}
+
+static int axp288_adc_set_state(struct regmap *regmap)
+{
+	/* ADC should be always enabled for internal FG to function */
+	if (regmap_write(regmap, AXP288_ADC_TS_PIN_CTRL, AXP288_ADC_TS_PIN_ON))
+		return -EIO;
+
+	return regmap_write(regmap, AXP20X_ADC_EN1, AXP288_ADC_EN_MASK);
+}
+
+static const struct iio_info axp288_adc_iio_info = {
+	.read_raw = &axp288_adc_read_raw,
+	.driver_module = THIS_MODULE,
+};
+
+static int axp288_adc_probe(struct platform_device *pdev)
+{
+	int ret;
+	struct axp288_adc_info *info;
+	struct iio_dev *indio_dev;
+	struct axp20x_dev *axp20x = dev_get_drvdata(pdev->dev.parent);
+
+	indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*info));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	info = iio_priv(indio_dev);
+	info->irq = platform_get_irq(pdev, 0);
+	if (info->irq < 0) {
+		dev_err(&pdev->dev, "no irq resource?\n");
+		return info->irq;
+	}
+	platform_set_drvdata(pdev, indio_dev);
+	info->regmap = axp20x->regmap;
+	/*
+	 * Set ADC to enabled state at all time, including system suspend.
+	 * otherwise internal fuel gauge functionality may be affected.
+	 */
+	ret = axp288_adc_set_state(axp20x->regmap);
+	if (ret) {
+		dev_err(&pdev->dev, "unable to enable ADC device\n");
+		return ret;
+	}
+
+	indio_dev->dev.parent = &pdev->dev;
+	indio_dev->name = pdev->name;
+	indio_dev->channels = axp288_adc_channels;
+	indio_dev->num_channels = ARRAY_SIZE(axp288_adc_channels);
+	indio_dev->info = &axp288_adc_iio_info;
+	indio_dev->modes = INDIO_DIRECT_MODE;
+	ret = iio_map_array_register(indio_dev, axp288_adc_default_maps);
+	if (ret < 0)
+		return ret;
+
+	ret = iio_device_register(indio_dev);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "unable to register iio device\n");
+		goto err_array_unregister;
+	}
+	return 0;
+
+err_array_unregister:
+	iio_map_array_unregister(indio_dev);
+
+	return ret;
+}
+
+static int axp288_adc_remove(struct platform_device *pdev)
+{
+	struct iio_dev *indio_dev = platform_get_drvdata(pdev);
+
+	iio_device_unregister(indio_dev);
+	iio_map_array_unregister(indio_dev);
+
+	return 0;
+}
+
+static struct platform_device_id axp288_adc_id_table[] = {
+	{ .name = "axp288_adc" },
+	{},
+};
+
+static struct platform_driver axp288_adc_driver = {
+	.probe = axp288_adc_probe,
+	.remove = axp288_adc_remove,
+	.id_table = axp288_adc_id_table,
+	.driver = {
+		.name = "axp288_adc",
+	},
+};
+
+MODULE_DEVICE_TABLE(platform, axp288_adc_id_table);
+
+module_platform_driver(axp288_adc_driver);
+
+MODULE_AUTHOR("Jacob Pan <jacob.jun.pan@linux.intel.com>");
+MODULE_DESCRIPTION("X-Powers AXP288 ADC Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 1456ea70bbc7..9af299ba711a 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -74,7 +74,8 @@ config MFD_AXP20X
 	select REGMAP_IRQ
 	depends on I2C=y
 	help
-	  If you say Y here you get support for the X-Powers AXP202 and AXP209.
+	  If you say Y here you get support for the X-Powers AXP202, AXP209 and
+	  AXP288 power management IC (PMIC).
 	  This driver include only the core APIs. You have to select individual
 	  components like regulators or the PEK (Power Enable Key) under the
 	  corresponding menus.
diff --git a/drivers/mfd/axp20x.c b/drivers/mfd/axp20x.c
index 6231adbb295d..1df18d188342 100644
--- a/drivers/mfd/axp20x.c
+++ b/drivers/mfd/axp20x.c
@@ -1,9 +1,9 @@
 /*
- * axp20x.c - MFD core driver for the X-Powers AXP202 and AXP209
+ * axp20x.c - MFD core driver for the X-Powers' Power Management ICs
  *
- * AXP20x comprises an adaptive USB-Compatible PWM charger, 2 BUCK DC-DC
- * converters, 5 LDOs, multiple 12-bit ADCs of voltage, current and temperature
- * as well as 4 configurable GPIOs.
+ * AXP20x typically comprises an adaptive USB-Compatible PWM charger, BUCK DC-DC
+ * converters, LDOs, multiple 12-bit ADCs of voltage, current and temperature
+ * as well as configurable GPIOs.
  *
  * Author: Carlo Caione <carlo@caione.org>
  *
@@ -25,9 +25,16 @@
 #include <linux/mfd/core.h>
 #include <linux/of_device.h>
 #include <linux/of_irq.h>
+#include <linux/acpi.h>
 
 #define AXP20X_OFF	0x80
 
+static const char const *axp20x_model_names[] = {
+	"AXP202",
+	"AXP209",
+	"AXP288",
+};
+
 static const struct regmap_range axp20x_writeable_ranges[] = {
 	regmap_reg_range(AXP20X_DATACACHE(0), AXP20X_IRQ5_STATE),
 	regmap_reg_range(AXP20X_DCDC_MODE, AXP20X_FG_RES),
@@ -47,6 +54,25 @@ static const struct regmap_access_table axp20x_volatile_table = {
 	.n_yes_ranges	= ARRAY_SIZE(axp20x_volatile_ranges),
 };
 
+static const struct regmap_range axp288_writeable_ranges[] = {
+	regmap_reg_range(AXP20X_DATACACHE(0), AXP20X_IRQ6_STATE),
+	regmap_reg_range(AXP20X_DCDC_MODE, AXP288_FG_TUNE5),
+};
+
+static const struct regmap_range axp288_volatile_ranges[] = {
+	regmap_reg_range(AXP20X_IRQ1_EN, AXP20X_IPSOUT_V_HIGH_L),
+};
+
+static const struct regmap_access_table axp288_writeable_table = {
+	.yes_ranges	= axp288_writeable_ranges,
+	.n_yes_ranges	= ARRAY_SIZE(axp288_writeable_ranges),
+};
+
+static const struct regmap_access_table axp288_volatile_table = {
+	.yes_ranges	= axp288_volatile_ranges,
+	.n_yes_ranges	= ARRAY_SIZE(axp288_volatile_ranges),
+};
+
 static struct resource axp20x_pek_resources[] = {
 	{
 		.name	= "PEK_DBR",
@@ -61,6 +87,39 @@ static struct resource axp20x_pek_resources[] = {
 	},
 };
 
+static struct resource axp288_battery_resources[] = {
+	{
+		.start = AXP288_IRQ_QWBTU,
+		.end   = AXP288_IRQ_QWBTU,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = AXP288_IRQ_WBTU,
+		.end   = AXP288_IRQ_WBTU,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = AXP288_IRQ_QWBTO,
+		.end   = AXP288_IRQ_QWBTO,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = AXP288_IRQ_WBTO,
+		.end   = AXP288_IRQ_WBTO,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = AXP288_IRQ_WL2,
+		.end   = AXP288_IRQ_WL2,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = AXP288_IRQ_WL1,
+		.end   = AXP288_IRQ_WL1,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
 static const struct regmap_config axp20x_regmap_config = {
 	.reg_bits	= 8,
 	.val_bits	= 8,
@@ -70,47 +129,96 @@ static const struct regmap_config axp20x_regmap_config = {
 	.cache_type	= REGCACHE_RBTREE,
 };
 
-#define AXP20X_IRQ(_irq, _off, _mask) \
-	[AXP20X_IRQ_##_irq] = { .reg_offset = (_off), .mask = BIT(_mask) }
+static const struct regmap_config axp288_regmap_config = {
+	.reg_bits	= 8,
+	.val_bits	= 8,
+	.wr_table	= &axp288_writeable_table,
+	.volatile_table	= &axp288_volatile_table,
+	.max_register	= AXP288_FG_TUNE5,
+	.cache_type	= REGCACHE_RBTREE,
+};
+
+#define INIT_REGMAP_IRQ(_variant, _irq, _off, _mask)			\
+	[_variant##_IRQ_##_irq] = { .reg_offset = (_off), .mask = BIT(_mask) }
 
 static const struct regmap_irq axp20x_regmap_irqs[] = {
-	AXP20X_IRQ(ACIN_OVER_V,		0, 7),
-	AXP20X_IRQ(ACIN_PLUGIN,		0, 6),
-	AXP20X_IRQ(ACIN_REMOVAL,	0, 5),
-	AXP20X_IRQ(VBUS_OVER_V,		0, 4),
-	AXP20X_IRQ(VBUS_PLUGIN,		0, 3),
-	AXP20X_IRQ(VBUS_REMOVAL,	0, 2),
-	AXP20X_IRQ(VBUS_V_LOW,		0, 1),
-	AXP20X_IRQ(BATT_PLUGIN,		1, 7),
-	AXP20X_IRQ(BATT_REMOVAL,	1, 6),
-	AXP20X_IRQ(BATT_ENT_ACT_MODE,	1, 5),
-	AXP20X_IRQ(BATT_EXIT_ACT_MODE,	1, 4),
-	AXP20X_IRQ(CHARG,		1, 3),
-	AXP20X_IRQ(CHARG_DONE,		1, 2),
-	AXP20X_IRQ(BATT_TEMP_HIGH,	1, 1),
-	AXP20X_IRQ(BATT_TEMP_LOW,	1, 0),
-	AXP20X_IRQ(DIE_TEMP_HIGH,	2, 7),
-	AXP20X_IRQ(CHARG_I_LOW,		2, 6),
-	AXP20X_IRQ(DCDC1_V_LONG,	2, 5),
-	AXP20X_IRQ(DCDC2_V_LONG,	2, 4),
-	AXP20X_IRQ(DCDC3_V_LONG,	2, 3),
-	AXP20X_IRQ(PEK_SHORT,		2, 1),
-	AXP20X_IRQ(PEK_LONG,		2, 0),
-	AXP20X_IRQ(N_OE_PWR_ON,		3, 7),
-	AXP20X_IRQ(N_OE_PWR_OFF,	3, 6),
-	AXP20X_IRQ(VBUS_VALID,		3, 5),
-	AXP20X_IRQ(VBUS_NOT_VALID,	3, 4),
-	AXP20X_IRQ(VBUS_SESS_VALID,	3, 3),
-	AXP20X_IRQ(VBUS_SESS_END,	3, 2),
-	AXP20X_IRQ(LOW_PWR_LVL1,	3, 1),
-	AXP20X_IRQ(LOW_PWR_LVL2,	3, 0),
-	AXP20X_IRQ(TIMER,		4, 7),
-	AXP20X_IRQ(PEK_RIS_EDGE,	4, 6),
-	AXP20X_IRQ(PEK_FAL_EDGE,	4, 5),
-	AXP20X_IRQ(GPIO3_INPUT,		4, 3),
-	AXP20X_IRQ(GPIO2_INPUT,		4, 2),
-	AXP20X_IRQ(GPIO1_INPUT,		4, 1),
-	AXP20X_IRQ(GPIO0_INPUT,		4, 0),
+	INIT_REGMAP_IRQ(AXP20X, ACIN_OVER_V,		0, 7),
+	INIT_REGMAP_IRQ(AXP20X, ACIN_PLUGIN,		0, 6),
+	INIT_REGMAP_IRQ(AXP20X, ACIN_REMOVAL,	        0, 5),
+	INIT_REGMAP_IRQ(AXP20X, VBUS_OVER_V,		0, 4),
+	INIT_REGMAP_IRQ(AXP20X, VBUS_PLUGIN,		0, 3),
+	INIT_REGMAP_IRQ(AXP20X, VBUS_REMOVAL,	        0, 2),
+	INIT_REGMAP_IRQ(AXP20X, VBUS_V_LOW,		0, 1),
+	INIT_REGMAP_IRQ(AXP20X, BATT_PLUGIN,		1, 7),
+	INIT_REGMAP_IRQ(AXP20X, BATT_REMOVAL,	        1, 6),
+	INIT_REGMAP_IRQ(AXP20X, BATT_ENT_ACT_MODE,	1, 5),
+	INIT_REGMAP_IRQ(AXP20X, BATT_EXIT_ACT_MODE,	1, 4),
+	INIT_REGMAP_IRQ(AXP20X, CHARG,		        1, 3),
+	INIT_REGMAP_IRQ(AXP20X, CHARG_DONE,		1, 2),
+	INIT_REGMAP_IRQ(AXP20X, BATT_TEMP_HIGH,	        1, 1),
+	INIT_REGMAP_IRQ(AXP20X, BATT_TEMP_LOW,	        1, 0),
+	INIT_REGMAP_IRQ(AXP20X, DIE_TEMP_HIGH,	        2, 7),
+	INIT_REGMAP_IRQ(AXP20X, CHARG_I_LOW,		2, 6),
+	INIT_REGMAP_IRQ(AXP20X, DCDC1_V_LONG,	        2, 5),
+	INIT_REGMAP_IRQ(AXP20X, DCDC2_V_LONG,	        2, 4),
+	INIT_REGMAP_IRQ(AXP20X, DCDC3_V_LONG,	        2, 3),
+	INIT_REGMAP_IRQ(AXP20X, PEK_SHORT,		2, 1),
+	INIT_REGMAP_IRQ(AXP20X, PEK_LONG,		2, 0),
+	INIT_REGMAP_IRQ(AXP20X, N_OE_PWR_ON,		3, 7),
+	INIT_REGMAP_IRQ(AXP20X, N_OE_PWR_OFF,	        3, 6),
+	INIT_REGMAP_IRQ(AXP20X, VBUS_VALID,		3, 5),
+	INIT_REGMAP_IRQ(AXP20X, VBUS_NOT_VALID,	        3, 4),
+	INIT_REGMAP_IRQ(AXP20X, VBUS_SESS_VALID,	3, 3),
+	INIT_REGMAP_IRQ(AXP20X, VBUS_SESS_END,	        3, 2),
+	INIT_REGMAP_IRQ(AXP20X, LOW_PWR_LVL1,	        3, 1),
+	INIT_REGMAP_IRQ(AXP20X, LOW_PWR_LVL2,	        3, 0),
+	INIT_REGMAP_IRQ(AXP20X, TIMER,		        4, 7),
+	INIT_REGMAP_IRQ(AXP20X, PEK_RIS_EDGE,	        4, 6),
+	INIT_REGMAP_IRQ(AXP20X, PEK_FAL_EDGE,	        4, 5),
+	INIT_REGMAP_IRQ(AXP20X, GPIO3_INPUT,		4, 3),
+	INIT_REGMAP_IRQ(AXP20X, GPIO2_INPUT,		4, 2),
+	INIT_REGMAP_IRQ(AXP20X, GPIO1_INPUT,		4, 1),
+	INIT_REGMAP_IRQ(AXP20X, GPIO0_INPUT,		4, 0),
+};
+
+/* some IRQs are compatible with axp20x models */
+static const struct regmap_irq axp288_regmap_irqs[] = {
+	INIT_REGMAP_IRQ(AXP288, VBUS_FALL,              0, 2),
+	INIT_REGMAP_IRQ(AXP288, VBUS_RISE,              0, 3),
+	INIT_REGMAP_IRQ(AXP288, OV,                     0, 4),
+
+	INIT_REGMAP_IRQ(AXP288, DONE,                   1, 2),
+	INIT_REGMAP_IRQ(AXP288, CHARGING,               1, 3),
+	INIT_REGMAP_IRQ(AXP288, SAFE_QUIT,              1, 4),
+	INIT_REGMAP_IRQ(AXP288, SAFE_ENTER,             1, 5),
+	INIT_REGMAP_IRQ(AXP288, ABSENT,                 1, 6),
+	INIT_REGMAP_IRQ(AXP288, APPEND,                 1, 7),
+
+	INIT_REGMAP_IRQ(AXP288, QWBTU,                  2, 0),
+	INIT_REGMAP_IRQ(AXP288, WBTU,                   2, 1),
+	INIT_REGMAP_IRQ(AXP288, QWBTO,                  2, 2),
+	INIT_REGMAP_IRQ(AXP288, WBTO,                   2, 3),
+	INIT_REGMAP_IRQ(AXP288, QCBTU,                  2, 4),
+	INIT_REGMAP_IRQ(AXP288, CBTU,                   2, 5),
+	INIT_REGMAP_IRQ(AXP288, QCBTO,                  2, 6),
+	INIT_REGMAP_IRQ(AXP288, CBTO,                   2, 7),
+
+	INIT_REGMAP_IRQ(AXP288, WL2,                    3, 0),
+	INIT_REGMAP_IRQ(AXP288, WL1,                    3, 1),
+	INIT_REGMAP_IRQ(AXP288, GPADC,                  3, 2),
+	INIT_REGMAP_IRQ(AXP288, OT,                     3, 7),
+
+	INIT_REGMAP_IRQ(AXP288, GPIO0,                  4, 0),
+	INIT_REGMAP_IRQ(AXP288, GPIO1,                  4, 1),
+	INIT_REGMAP_IRQ(AXP288, POKO,                   4, 2),
+	INIT_REGMAP_IRQ(AXP288, POKL,                   4, 3),
+	INIT_REGMAP_IRQ(AXP288, POKS,                   4, 4),
+	INIT_REGMAP_IRQ(AXP288, POKN,                   4, 5),
+	INIT_REGMAP_IRQ(AXP288, POKP,                   4, 6),
+	INIT_REGMAP_IRQ(AXP288, TIMER,                  4, 7),
+
+	INIT_REGMAP_IRQ(AXP288, MV_CHNG,                5, 0),
+	INIT_REGMAP_IRQ(AXP288, BC_USB_CHNG,            5, 1),
 };
 
 static const struct of_device_id axp20x_of_match[] = {
@@ -128,16 +236,39 @@ static const struct i2c_device_id axp20x_i2c_id[] = {
 };
 MODULE_DEVICE_TABLE(i2c, axp20x_i2c_id);
 
+static struct acpi_device_id axp20x_acpi_match[] = {
+	{
+		.id = "INT33F4",
+		.driver_data = AXP288_ID,
+	},
+	{ },
+};
+MODULE_DEVICE_TABLE(acpi, axp20x_acpi_match);
+
 static const struct regmap_irq_chip axp20x_regmap_irq_chip = {
 	.name			= "axp20x_irq_chip",
 	.status_base		= AXP20X_IRQ1_STATE,
 	.ack_base		= AXP20X_IRQ1_STATE,
 	.mask_base		= AXP20X_IRQ1_EN,
-	.num_regs		= 5,
+	.mask_invert		= true,
+	.init_ack_masked	= true,
 	.irqs			= axp20x_regmap_irqs,
 	.num_irqs		= ARRAY_SIZE(axp20x_regmap_irqs),
+	.num_regs		= 5,
+
+};
+
+static const struct regmap_irq_chip axp288_regmap_irq_chip = {
+	.name			= "axp288_irq_chip",
+	.status_base		= AXP20X_IRQ1_STATE,
+	.ack_base		= AXP20X_IRQ1_STATE,
+	.mask_base		= AXP20X_IRQ1_EN,
 	.mask_invert		= true,
 	.init_ack_masked	= true,
+	.irqs			= axp288_regmap_irqs,
+	.num_irqs		= ARRAY_SIZE(axp288_regmap_irqs),
+	.num_regs		= 6,
+
 };
 
 static struct mfd_cell axp20x_cells[] = {
@@ -150,36 +281,158 @@ static struct mfd_cell axp20x_cells[] = {
 	},
 };
 
+static struct resource axp288_adc_resources[] = {
+	{
+		.name  = "GPADC",
+		.start = AXP288_IRQ_GPADC,
+		.end   = AXP288_IRQ_GPADC,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct resource axp288_charger_resources[] = {
+	{
+		.start = AXP288_IRQ_OV,
+		.end   = AXP288_IRQ_OV,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = AXP288_IRQ_DONE,
+		.end   = AXP288_IRQ_DONE,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = AXP288_IRQ_CHARGING,
+		.end   = AXP288_IRQ_CHARGING,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = AXP288_IRQ_SAFE_QUIT,
+		.end   = AXP288_IRQ_SAFE_QUIT,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = AXP288_IRQ_SAFE_ENTER,
+		.end   = AXP288_IRQ_SAFE_ENTER,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = AXP288_IRQ_QCBTU,
+		.end   = AXP288_IRQ_QCBTU,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = AXP288_IRQ_CBTU,
+		.end   = AXP288_IRQ_CBTU,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = AXP288_IRQ_QCBTO,
+		.end   = AXP288_IRQ_QCBTO,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = AXP288_IRQ_CBTO,
+		.end   = AXP288_IRQ_CBTO,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct mfd_cell axp288_cells[] = {
+	{
+		.name = "axp288_adc",
+		.num_resources = ARRAY_SIZE(axp288_adc_resources),
+		.resources = axp288_adc_resources,
+	},
+	{
+		.name = "axp288_charger",
+		.num_resources = ARRAY_SIZE(axp288_charger_resources),
+		.resources = axp288_charger_resources,
+	},
+	{
+		.name = "axp288_battery",
+		.num_resources = ARRAY_SIZE(axp288_battery_resources),
+		.resources = axp288_battery_resources,
+	},
+	{
+		.name = "axp288_pmic_acpi",
+	},
+};
+
 static struct axp20x_dev *axp20x_pm_power_off;
 static void axp20x_power_off(void)
 {
+	if (axp20x_pm_power_off->variant == AXP288_ID)
+		return;
+
 	regmap_write(axp20x_pm_power_off->regmap, AXP20X_OFF_CTRL,
 		     AXP20X_OFF);
 }
 
+static int axp20x_match_device(struct axp20x_dev *axp20x, struct device *dev)
+{
+	const struct acpi_device_id *acpi_id;
+	const struct of_device_id *of_id;
+
+	if (dev->of_node) {
+		of_id = of_match_device(axp20x_of_match, dev);
+		if (!of_id) {
+			dev_err(dev, "Unable to match OF ID\n");
+			return -ENODEV;
+		}
+		axp20x->variant = (long) of_id->data;
+	} else {
+		acpi_id = acpi_match_device(dev->driver->acpi_match_table, dev);
+		if (!acpi_id || !acpi_id->driver_data) {
+			dev_err(dev, "Unable to match ACPI ID and data\n");
+			return -ENODEV;
+		}
+		axp20x->variant = (long) acpi_id->driver_data;
+	}
+
+	switch (axp20x->variant) {
+	case AXP202_ID:
+	case AXP209_ID:
+		axp20x->nr_cells = ARRAY_SIZE(axp20x_cells);
+		axp20x->cells = axp20x_cells;
+		axp20x->regmap_cfg = &axp20x_regmap_config;
+		axp20x->regmap_irq_chip = &axp20x_regmap_irq_chip;
+		break;
+	case AXP288_ID:
+		axp20x->cells = axp288_cells;
+		axp20x->nr_cells = ARRAY_SIZE(axp288_cells);
+		axp20x->regmap_cfg = &axp288_regmap_config;
+		axp20x->regmap_irq_chip = &axp288_regmap_irq_chip;
+		break;
+	default:
+		dev_err(dev, "unsupported AXP20X ID %lu\n", axp20x->variant);
+		return -EINVAL;
+	}
+	dev_info(dev, "AXP20x variant %s found\n",
+		axp20x_model_names[axp20x->variant]);
+
+	return 0;
+}
+
 static int axp20x_i2c_probe(struct i2c_client *i2c,
 			 const struct i2c_device_id *id)
 {
 	struct axp20x_dev *axp20x;
-	const struct of_device_id *of_id;
 	int ret;
 
 	axp20x = devm_kzalloc(&i2c->dev, sizeof(*axp20x), GFP_KERNEL);
 	if (!axp20x)
 		return -ENOMEM;
 
-	of_id = of_match_device(axp20x_of_match, &i2c->dev);
-	if (!of_id) {
-		dev_err(&i2c->dev, "Unable to setup AXP20X data\n");
-		return -ENODEV;
-	}
-	axp20x->variant = (long) of_id->data;
+	ret = axp20x_match_device(axp20x, &i2c->dev);
+	if (ret)
+		return ret;
 
 	axp20x->i2c_client = i2c;
 	axp20x->dev = &i2c->dev;
 	dev_set_drvdata(axp20x->dev, axp20x);
 
-	axp20x->regmap = devm_regmap_init_i2c(i2c, &axp20x_regmap_config);
+	axp20x->regmap = devm_regmap_init_i2c(i2c, axp20x->regmap_cfg);
 	if (IS_ERR(axp20x->regmap)) {
 		ret = PTR_ERR(axp20x->regmap);
 		dev_err(&i2c->dev, "regmap init failed: %d\n", ret);
@@ -188,15 +441,15 @@ static int axp20x_i2c_probe(struct i2c_client *i2c,
 
 	ret = regmap_add_irq_chip(axp20x->regmap, i2c->irq,
 				  IRQF_ONESHOT | IRQF_SHARED, -1,
-				  &axp20x_regmap_irq_chip,
+				  axp20x->regmap_irq_chip,
 				  &axp20x->regmap_irqc);
 	if (ret) {
 		dev_err(&i2c->dev, "failed to add irq chip: %d\n", ret);
 		return ret;
 	}
 
-	ret = mfd_add_devices(axp20x->dev, -1, axp20x_cells,
-			      ARRAY_SIZE(axp20x_cells), NULL, 0, NULL);
+	ret = mfd_add_devices(axp20x->dev, -1, axp20x->cells,
+			axp20x->nr_cells, NULL, 0, NULL);
 
 	if (ret) {
 		dev_err(&i2c->dev, "failed to add MFD devices: %d\n", ret);
@@ -234,6 +487,7 @@ static struct i2c_driver axp20x_i2c_driver = {
 		.name	= "axp20x",
 		.owner	= THIS_MODULE,
 		.of_match_table	= of_match_ptr(axp20x_of_match),
+		.acpi_match_table = ACPI_PTR(axp20x_acpi_match),
 	},
 	.probe		= axp20x_i2c_probe,
 	.remove		= axp20x_i2c_remove,
diff --git a/drivers/mfd/intel_soc_pmic_crc.c b/drivers/mfd/intel_soc_pmic_crc.c
index 7107cab832e6..c85e2ecb868a 100644
--- a/drivers/mfd/intel_soc_pmic_crc.c
+++ b/drivers/mfd/intel_soc_pmic_crc.c
@@ -106,6 +106,9 @@ static struct mfd_cell crystal_cove_dev[] = {
 		.num_resources = ARRAY_SIZE(gpio_resources),
 		.resources = gpio_resources,
 	},
+	{
+		.name = "crystal_cove_pmic",
+	},
 };
 
 static struct regmap_config crystal_cove_regmap_config = {