summaryrefslogtreecommitdiff
path: root/drivers
diff options
context:
space:
mode:
Diffstat (limited to 'drivers')
-rw-r--r--drivers/firewire/fw-card.c4
-rw-r--r--drivers/firewire/fw-device.c123
-rw-r--r--drivers/firewire/fw-device.h1
-rw-r--r--drivers/firewire/fw-ohci.c6
-rw-r--r--drivers/firewire/fw-sbp2.c89
-rw-r--r--drivers/firewire/fw-topology.c12
-rw-r--r--drivers/firewire/fw-transaction.h9
-rw-r--r--drivers/ieee1394/ieee1394.h4
-rw-r--r--drivers/ieee1394/ieee1394_core.c16
-rw-r--r--drivers/ieee1394/ohci1394.h2
-rw-r--r--drivers/ieee1394/sbp2.c54
11 files changed, 221 insertions, 99 deletions
diff --git a/drivers/firewire/fw-card.c b/drivers/firewire/fw-card.c
index 6bd91a15d5e6..7be2cf3514e7 100644
--- a/drivers/firewire/fw-card.c
+++ b/drivers/firewire/fw-card.c
@@ -232,7 +232,7 @@ fw_card_bm_work(struct work_struct *work)
root_id = root_node->node_id;
grace = time_after(jiffies, card->reset_jiffies + DIV_ROUND_UP(HZ, 10));
- if (card->bm_generation + 1 == generation ||
+ if (is_next_generation(generation, card->bm_generation) ||
(card->bm_generation != generation && grace)) {
/*
* This first step is to figure out who is IRM and
@@ -512,7 +512,7 @@ fw_core_remove_card(struct fw_card *card)
fw_core_initiate_bus_reset(card, 1);
mutex_lock(&card_mutex);
- list_del(&card->link);
+ list_del_init(&card->link);
mutex_unlock(&card_mutex);
/* Set up the dummy driver. */
diff --git a/drivers/firewire/fw-device.c b/drivers/firewire/fw-device.c
index 2af5a8d1e012..bf53acb45652 100644
--- a/drivers/firewire/fw-device.c
+++ b/drivers/firewire/fw-device.c
@@ -25,6 +25,7 @@
#include <linux/device.h>
#include <linux/delay.h>
#include <linux/idr.h>
+#include <linux/jiffies.h>
#include <linux/string.h>
#include <linux/rwsem.h>
#include <linux/semaphore.h>
@@ -634,12 +635,39 @@ struct fw_device *fw_device_get_by_devt(dev_t devt)
return device;
}
+/*
+ * These defines control the retry behavior for reading the config
+ * rom. It shouldn't be necessary to tweak these; if the device
+ * doesn't respond to a config rom read within 10 seconds, it's not
+ * going to respond at all. As for the initial delay, a lot of
+ * devices will be able to respond within half a second after bus
+ * reset. On the other hand, it's not really worth being more
+ * aggressive than that, since it scales pretty well; if 10 devices
+ * are plugged in, they're all getting read within one second.
+ */
+
+#define MAX_RETRIES 10
+#define RETRY_DELAY (3 * HZ)
+#define INITIAL_DELAY (HZ / 2)
+#define SHUTDOWN_DELAY (2 * HZ)
+
static void fw_device_shutdown(struct work_struct *work)
{
struct fw_device *device =
container_of(work, struct fw_device, work.work);
int minor = MINOR(device->device.devt);
+ if (time_is_after_jiffies(device->card->reset_jiffies + SHUTDOWN_DELAY)
+ && !list_empty(&device->card->link)) {
+ schedule_delayed_work(&device->work, SHUTDOWN_DELAY);
+ return;
+ }
+
+ if (atomic_cmpxchg(&device->state,
+ FW_DEVICE_GONE,
+ FW_DEVICE_SHUTDOWN) != FW_DEVICE_GONE)
+ return;
+
fw_device_cdev_remove(device);
device_for_each_child(&device->device, NULL, shutdown_unit);
device_unregister(&device->device);
@@ -647,6 +675,7 @@ static void fw_device_shutdown(struct work_struct *work)
down_write(&fw_device_rwsem);
idr_remove(&fw_device_idr, minor);
up_write(&fw_device_rwsem);
+
fw_device_put(device);
}
@@ -654,25 +683,63 @@ static struct device_type fw_device_type = {
.release = fw_device_release,
};
+static void fw_device_update(struct work_struct *work);
+
/*
- * These defines control the retry behavior for reading the config
- * rom. It shouldn't be necessary to tweak these; if the device
- * doesn't respond to a config rom read within 10 seconds, it's not
- * going to respond at all. As for the initial delay, a lot of
- * devices will be able to respond within half a second after bus
- * reset. On the other hand, it's not really worth being more
- * aggressive than that, since it scales pretty well; if 10 devices
- * are plugged in, they're all getting read within one second.
+ * If a device was pending for deletion because its node went away but its
+ * bus info block and root directory header matches that of a newly discovered
+ * device, revive the existing fw_device.
+ * The newly allocated fw_device becomes obsolete instead.
*/
+static int lookup_existing_device(struct device *dev, void *data)
+{
+ struct fw_device *old = fw_device(dev);
+ struct fw_device *new = data;
+ struct fw_card *card = new->card;
+ int match = 0;
+
+ down_read(&fw_device_rwsem); /* serialize config_rom access */
+ spin_lock_irq(&card->lock); /* serialize node access */
+
+ if (memcmp(old->config_rom, new->config_rom, 6 * 4) == 0 &&
+ atomic_cmpxchg(&old->state,
+ FW_DEVICE_GONE,
+ FW_DEVICE_RUNNING) == FW_DEVICE_GONE) {
+ struct fw_node *current_node = new->node;
+ struct fw_node *obsolete_node = old->node;
+
+ new->node = obsolete_node;
+ new->node->data = new;
+ old->node = current_node;
+ old->node->data = old;
+
+ old->max_speed = new->max_speed;
+ old->node_id = current_node->node_id;
+ smp_wmb(); /* update node_id before generation */
+ old->generation = card->generation;
+ old->config_rom_retries = 0;
+ fw_notify("rediscovered device %s\n", dev_name(dev));
-#define MAX_RETRIES 10
-#define RETRY_DELAY (3 * HZ)
-#define INITIAL_DELAY (HZ / 2)
+ PREPARE_DELAYED_WORK(&old->work, fw_device_update);
+ schedule_delayed_work(&old->work, 0);
+
+ if (current_node == card->root_node)
+ fw_schedule_bm_work(card, 0);
+
+ match = 1;
+ }
+
+ spin_unlock_irq(&card->lock);
+ up_read(&fw_device_rwsem);
+
+ return match;
+}
static void fw_device_init(struct work_struct *work)
{
struct fw_device *device =
container_of(work, struct fw_device, work.work);
+ struct device *revived_dev;
int minor, err;
/*
@@ -696,6 +763,15 @@ static void fw_device_init(struct work_struct *work)
return;
}
+ revived_dev = device_find_child(device->card->device,
+ device, lookup_existing_device);
+ if (revived_dev) {
+ put_device(revived_dev);
+ fw_device_release(&device->device);
+
+ return;
+ }
+
device_initialize(&device->device);
fw_device_get(device);
@@ -734,9 +810,10 @@ static void fw_device_init(struct work_struct *work)
* fw_node_event().
*/
if (atomic_cmpxchg(&device->state,
- FW_DEVICE_INITIALIZING,
- FW_DEVICE_RUNNING) == FW_DEVICE_SHUTDOWN) {
- fw_device_shutdown(work);
+ FW_DEVICE_INITIALIZING,
+ FW_DEVICE_RUNNING) == FW_DEVICE_GONE) {
+ PREPARE_DELAYED_WORK(&device->work, fw_device_shutdown);
+ schedule_delayed_work(&device->work, SHUTDOWN_DELAY);
} else {
if (device->config_rom_retries)
fw_notify("created device %s: GUID %08x%08x, S%d00, "
@@ -847,8 +924,8 @@ static void fw_device_refresh(struct work_struct *work)
case REREAD_BIB_UNCHANGED:
if (atomic_cmpxchg(&device->state,
- FW_DEVICE_INITIALIZING,
- FW_DEVICE_RUNNING) == FW_DEVICE_SHUTDOWN)
+ FW_DEVICE_INITIALIZING,
+ FW_DEVICE_RUNNING) == FW_DEVICE_GONE)
goto gone;
fw_device_update(work);
@@ -879,8 +956,8 @@ static void fw_device_refresh(struct work_struct *work)
create_units(device);
if (atomic_cmpxchg(&device->state,
- FW_DEVICE_INITIALIZING,
- FW_DEVICE_RUNNING) == FW_DEVICE_SHUTDOWN)
+ FW_DEVICE_INITIALIZING,
+ FW_DEVICE_RUNNING) == FW_DEVICE_GONE)
goto gone;
fw_notify("refreshed device %s\n", dev_name(&device->device));
@@ -890,8 +967,9 @@ static void fw_device_refresh(struct work_struct *work)
give_up:
fw_notify("giving up on refresh of device %s\n", dev_name(&device->device));
gone:
- atomic_set(&device->state, FW_DEVICE_SHUTDOWN);
- fw_device_shutdown(work);
+ atomic_set(&device->state, FW_DEVICE_GONE);
+ PREPARE_DELAYED_WORK(&device->work, fw_device_shutdown);
+ schedule_delayed_work(&device->work, SHUTDOWN_DELAY);
out:
if (node_id == card->root_node->node_id)
fw_schedule_bm_work(card, 0);
@@ -995,9 +1073,10 @@ void fw_node_event(struct fw_card *card, struct fw_node *node, int event)
*/
device = node->data;
if (atomic_xchg(&device->state,
- FW_DEVICE_SHUTDOWN) == FW_DEVICE_RUNNING) {
+ FW_DEVICE_GONE) == FW_DEVICE_RUNNING) {
PREPARE_DELAYED_WORK(&device->work, fw_device_shutdown);
- schedule_delayed_work(&device->work, 0);
+ schedule_delayed_work(&device->work,
+ list_empty(&card->link) ? 0 : SHUTDOWN_DELAY);
}
break;
}
diff --git a/drivers/firewire/fw-device.h b/drivers/firewire/fw-device.h
index df51732608d9..8ef6ec2ca21c 100644
--- a/drivers/firewire/fw-device.h
+++ b/drivers/firewire/fw-device.h
@@ -28,6 +28,7 @@
enum fw_device_state {
FW_DEVICE_INITIALIZING,
FW_DEVICE_RUNNING,
+ FW_DEVICE_GONE,
FW_DEVICE_SHUTDOWN,
};
diff --git a/drivers/firewire/fw-ohci.c b/drivers/firewire/fw-ohci.c
index ab9c01e462ef..6d19828a93a5 100644
--- a/drivers/firewire/fw-ohci.c
+++ b/drivers/firewire/fw-ohci.c
@@ -226,7 +226,7 @@ static inline struct fw_ohci *fw_ohci(struct fw_card *card)
#define CONTEXT_DEAD 0x0800
#define CONTEXT_ACTIVE 0x0400
-#define OHCI1394_MAX_AT_REQ_RETRIES 0x2
+#define OHCI1394_MAX_AT_REQ_RETRIES 0xf
#define OHCI1394_MAX_AT_RESP_RETRIES 0x2
#define OHCI1394_MAX_PHYS_RESP_RETRIES 0x8
@@ -896,11 +896,11 @@ static void context_stop(struct context *ctx)
for (i = 0; i < 10; i++) {
reg = reg_read(ctx->ohci, CONTROL_SET(ctx->regs));
if ((reg & CONTEXT_ACTIVE) == 0)
- break;
+ return;
- fw_notify("context_stop: still active (0x%08x)\n", reg);
mdelay(1);
}
+ fw_error("Error: DMA context still active (0x%08x)\n", reg);
}
struct driver_data {
diff --git a/drivers/firewire/fw-sbp2.c b/drivers/firewire/fw-sbp2.c
index e88d5067448c..c71c4419d9e8 100644
--- a/drivers/firewire/fw-sbp2.c
+++ b/drivers/firewire/fw-sbp2.c
@@ -168,6 +168,7 @@ struct sbp2_target {
int address_high;
unsigned int workarounds;
unsigned int mgt_orb_timeout;
+ unsigned int max_payload;
int dont_block; /* counter for each logical unit */
int blocked; /* ditto */
@@ -310,14 +311,16 @@ struct sbp2_command_orb {
dma_addr_t page_table_bus;
};
+#define SBP2_ROM_VALUE_WILDCARD ~0 /* match all */
+#define SBP2_ROM_VALUE_MISSING 0xff000000 /* not present in the unit dir. */
+
/*
* List of devices with known bugs.
*
* The firmware_revision field, masked with 0xffff00, is the best
* indicator for the type of bridge chip of a device. It yields a few
* false positives but this did not break correctly behaving devices
- * so far. We use ~0 as a wildcard, since the 24 bit values we get
- * from the config rom can never match that.
+ * so far.
*/
static const struct {
u32 firmware_revision;
@@ -339,33 +342,35 @@ static const struct {
},
/* Initio bridges, actually only needed for some older ones */ {
.firmware_revision = 0x000200,
- .model = ~0,
+ .model = SBP2_ROM_VALUE_WILDCARD,
.workarounds = SBP2_WORKAROUND_INQUIRY_36,
},
/* PL-3507 bridge with Prolific firmware */ {
.firmware_revision = 0x012800,
- .model = ~0,
+ .model = SBP2_ROM_VALUE_WILDCARD,
.workarounds = SBP2_WORKAROUND_POWER_CONDITION,
},
/* Symbios bridge */ {
.firmware_revision = 0xa0b800,
- .model = ~0,
+ .model = SBP2_ROM_VALUE_WILDCARD,
.workarounds = SBP2_WORKAROUND_128K_MAX_TRANS,
},
/* Datafab MD2-FW2 with Symbios/LSILogic SYM13FW500 bridge */ {
.firmware_revision = 0x002600,
- .model = ~0,
+ .model = SBP2_ROM_VALUE_WILDCARD,
.workarounds = SBP2_WORKAROUND_128K_MAX_TRANS,
},
-
/*
- * There are iPods (2nd gen, 3rd gen) with model_id == 0, but
- * these iPods do not feature the read_capacity bug according
- * to one report. Read_capacity behaviour as well as model_id
- * could change due to Apple-supplied firmware updates though.
+ * iPod 2nd generation: needs 128k max transfer size workaround
+ * iPod 3rd generation: needs fix capacity workaround
*/
-
- /* iPod 4th generation. */ {
+ {
+ .firmware_revision = 0x0a2700,
+ .model = 0x000000,
+ .workarounds = SBP2_WORKAROUND_128K_MAX_TRANS |
+ SBP2_WORKAROUND_FIX_CAPACITY,
+ },
+ /* iPod 4th generation */ {
.firmware_revision = 0x0a2700,
.model = 0x000021,
.workarounds = SBP2_WORKAROUND_FIX_CAPACITY,
@@ -1092,7 +1097,7 @@ static void sbp2_init_workarounds(struct sbp2_target *tgt, u32 model,
continue;
if (sbp2_workarounds_table[i].model != model &&
- sbp2_workarounds_table[i].model != ~0)
+ sbp2_workarounds_table[i].model != SBP2_ROM_VALUE_WILDCARD)
continue;
w |= sbp2_workarounds_table[i].workarounds;
@@ -1142,20 +1147,28 @@ static int sbp2_probe(struct device *dev)
fw_device_get(device);
fw_unit_get(unit);
- /* Initialize to values that won't match anything in our table. */
- firmware_revision = 0xff000000;
- model = 0xff000000;
-
/* implicit directory ID */
tgt->directory_id = ((unit->directory - device->config_rom) * 4
+ CSR_CONFIG_ROM) & 0xffffff;
+ firmware_revision = SBP2_ROM_VALUE_MISSING;
+ model = SBP2_ROM_VALUE_MISSING;
+
if (sbp2_scan_unit_dir(tgt, unit->directory, &model,
&firmware_revision) < 0)
goto fail_tgt_put;
sbp2_init_workarounds(tgt, model, firmware_revision);
+ /*
+ * At S100 we can do 512 bytes per packet, at S200 1024 bytes,
+ * and so on up to 4096 bytes. The SBP-2 max_payload field
+ * specifies the max payload size as 2 ^ (max_payload + 2), so
+ * if we set this to max_speed + 7, we get the right value.
+ */
+ tgt->max_payload = min(device->max_speed + 7, 10U);
+ tgt->max_payload = min(tgt->max_payload, device->card->max_receive - 1);
+
/* Do the login in a workqueue so we can easily reschedule retries. */
list_for_each_entry(lu, &tgt->lu_list, link)
sbp2_queue_work(lu, DIV_ROUND_UP(HZ, 5));
@@ -1273,6 +1286,19 @@ static struct fw_driver sbp2_driver = {
.id_table = sbp2_id_table,
};
+static void sbp2_unmap_scatterlist(struct device *card_device,
+ struct sbp2_command_orb *orb)
+{
+ if (scsi_sg_count(orb->cmd))
+ dma_unmap_sg(card_device, scsi_sglist(orb->cmd),
+ scsi_sg_count(orb->cmd),
+ orb->cmd->sc_data_direction);
+
+ if (orb->request.misc & cpu_to_be32(COMMAND_ORB_PAGE_TABLE_PRESENT))
+ dma_unmap_single(card_device, orb->page_table_bus,
+ sizeof(orb->page_table), DMA_TO_DEVICE);
+}
+
static unsigned int
sbp2_status_to_sense_data(u8 *sbp2_status, u8 *sense_data)
{
@@ -1352,15 +1378,7 @@ complete_command_orb(struct sbp2_orb *base_orb, struct sbp2_status *status)
dma_unmap_single(device->card->device, orb->base.request_bus,
sizeof(orb->request), DMA_TO_DEVICE);
-
- if (scsi_sg_count(orb->cmd) > 0)
- dma_unmap_sg(device->card->device, scsi_sglist(orb->cmd),
- scsi_sg_count(orb->cmd),
- orb->cmd->sc_data_direction);
-
- if (orb->page_table_bus != 0)
- dma_unmap_single(device->card->device, orb->page_table_bus,
- sizeof(orb->page_table), DMA_TO_DEVICE);
+ sbp2_unmap_scatterlist(device->card->device, orb);
orb->cmd->result = result;
orb->done(orb->cmd);
@@ -1434,7 +1452,6 @@ static int sbp2_scsi_queuecommand(struct scsi_cmnd *cmd, scsi_done_fn_t done)
struct sbp2_logical_unit *lu = cmd->device->hostdata;
struct fw_device *device = fw_device(lu->tgt->unit->device.parent);
struct sbp2_command_orb *orb;
- unsigned int max_payload;
int generation, retval = SCSI_MLQUEUE_HOST_BUSY;
/*
@@ -1462,17 +1479,9 @@ static int sbp2_scsi_queuecommand(struct scsi_cmnd *cmd, scsi_done_fn_t done)
orb->done = done;
orb->cmd = cmd;
- orb->request.next.high = cpu_to_be32(SBP2_ORB_NULL);
- /*
- * At speed 100 we can do 512 bytes per packet, at speed 200,
- * 1024 bytes per packet etc. The SBP-2 max_payload field
- * specifies the max payload size as 2 ^ (max_payload + 2), so
- * if we set this to max_speed + 7, we get the right value.
- */
- max_payload = min(device->max_speed + 7,
- device->card->max_receive - 1);
+ orb->request.next.high = cpu_to_be32(SBP2_ORB_NULL);
orb->request.misc = cpu_to_be32(
- COMMAND_ORB_MAX_PAYLOAD(max_payload) |
+ COMMAND_ORB_MAX_PAYLOAD(lu->tgt->max_payload) |
COMMAND_ORB_SPEED(device->max_speed) |
COMMAND_ORB_NOTIFY);
@@ -1491,8 +1500,10 @@ static int sbp2_scsi_queuecommand(struct scsi_cmnd *cmd, scsi_done_fn_t done)
orb->base.request_bus =
dma_map_single(device->card->device, &orb->request,
sizeof(orb->request), DMA_TO_DEVICE);
- if (dma_mapping_error(device->card->device, orb->base.request_bus))
+ if (dma_mapping_error(device->card->device, orb->base.request_bus)) {
+ sbp2_unmap_scatterlist(device->card->device, orb);
goto out;
+ }
sbp2_send_orb(&orb->base, lu, lu->tgt->node_id, generation,
lu->command_block_agent_address + SBP2_ORB_POINTER);
diff --git a/drivers/firewire/fw-topology.c b/drivers/firewire/fw-topology.c
index c9be6e6948c4..8dd6703b55cd 100644
--- a/drivers/firewire/fw-topology.c
+++ b/drivers/firewire/fw-topology.c
@@ -518,6 +518,18 @@ fw_core_handle_bus_reset(struct fw_card *card,
struct fw_node *local_node;
unsigned long flags;
+ /*
+ * If the selfID buffer is not the immediate successor of the
+ * previously processed one, we cannot reliably compare the
+ * old and new topologies.
+ */
+ if (!is_next_generation(generation, card->generation) &&
+ card->local_node != NULL) {
+ fw_notify("skipped bus generations, destroying all nodes\n");
+ fw_destroy_nodes(card);
+ card->bm_retries = 0;
+ }
+
spin_lock_irqsave(&card->lock, flags);
card->node_id = node_id;
diff --git a/drivers/firewire/fw-transaction.h b/drivers/firewire/fw-transaction.h
index c9ab12a15f6e..1d78e9cc5940 100644
--- a/drivers/firewire/fw-transaction.h
+++ b/drivers/firewire/fw-transaction.h
@@ -276,6 +276,15 @@ static inline void fw_card_put(struct fw_card *card)
extern void fw_schedule_bm_work(struct fw_card *card, unsigned long delay);
/*
+ * Check whether new_generation is the immediate successor of old_generation.
+ * Take counter roll-over at 255 (as per to OHCI) into account.
+ */
+static inline bool is_next_generation(int new_generation, int old_generation)
+{
+ return (new_generation & 0xff) == ((old_generation + 1) & 0xff);
+}
+
+/*
* The iso packet format allows for an immediate header/payload part
* stored in 'header' immediately after the packet info plus an
* indirect payload part that is pointer to by the 'payload' field.
diff --git a/drivers/ieee1394/ieee1394.h b/drivers/ieee1394/ieee1394.h
index e0ae0d3d747f..af320e2c5079 100644
--- a/drivers/ieee1394/ieee1394.h
+++ b/drivers/ieee1394/ieee1394.h
@@ -54,9 +54,7 @@
#define IEEE1394_SPEED_800 0x03
#define IEEE1394_SPEED_1600 0x04
#define IEEE1394_SPEED_3200 0x05
-
-/* The current highest tested speed supported by the subsystem */
-#define IEEE1394_SPEED_MAX IEEE1394_SPEED_800
+#define IEEE1394_SPEED_MAX IEEE1394_SPEED_3200
/* Maps speed values above to a string representation */
extern const char *hpsb_speedto_str[];
diff --git a/drivers/ieee1394/ieee1394_core.c b/drivers/ieee1394/ieee1394_core.c
index dcdb71a7718d..2beb8d94f7bd 100644
--- a/drivers/ieee1394/ieee1394_core.c
+++ b/drivers/ieee1394/ieee1394_core.c
@@ -338,6 +338,7 @@ static void build_speed_map(struct hpsb_host *host, int nodecount)
u8 cldcnt[nodecount];
u8 *map = host->speed_map;
u8 *speedcap = host->speed;
+ u8 local_link_speed = host->csr.lnk_spd;
struct selfid *sid;
struct ext_selfid *esid;
int i, j, n;
@@ -373,8 +374,8 @@ static void build_speed_map(struct hpsb_host *host, int nodecount)
if (sid->port2 == SELFID_PORT_CHILD) cldcnt[n]++;
speedcap[n] = sid->speed;
- if (speedcap[n] > host->csr.lnk_spd)
- speedcap[n] = host->csr.lnk_spd;
+ if (speedcap[n] > local_link_speed)
+ speedcap[n] = local_link_speed;
n--;
}
}
@@ -407,12 +408,11 @@ static void build_speed_map(struct hpsb_host *host, int nodecount)
}
}
-#if SELFID_SPEED_UNKNOWN != IEEE1394_SPEED_MAX
- /* assume maximum speed for 1394b PHYs, nodemgr will correct it */
- for (n = 0; n < nodecount; n++)
- if (speedcap[n] == SELFID_SPEED_UNKNOWN)
- speedcap[n] = IEEE1394_SPEED_MAX;
-#endif
+ /* assume a maximum speed for 1394b PHYs, nodemgr will correct it */
+ if (local_link_speed > SELFID_SPEED_UNKNOWN)
+ for (i = 0; i < nodecount; i++)
+ if (speedcap[i] == SELFID_SPEED_UNKNOWN)
+ speedcap[i] = local_link_speed;
}
diff --git a/drivers/ieee1394/ohci1394.h b/drivers/ieee1394/ohci1394.h
index 4320bf010495..7fb8ab9780ae 100644
--- a/drivers/ieee1394/ohci1394.h
+++ b/drivers/ieee1394/ohci1394.h
@@ -26,7 +26,7 @@
#define OHCI1394_DRIVER_NAME "ohci1394"
-#define OHCI1394_MAX_AT_REQ_RETRIES 0x2
+#define OHCI1394_MAX_AT_REQ_RETRIES 0xf
#define OHCI1394_MAX_AT_RESP_RETRIES 0x2
#define OHCI1394_MAX_PHYS_RESP_RETRIES 0x8
#define OHCI1394_MAX_SELF_ID_ERRORS 16
diff --git a/drivers/ieee1394/sbp2.c b/drivers/ieee1394/sbp2.c
index ab1034ccb7fb..f3fd8657ce4b 100644
--- a/drivers/ieee1394/sbp2.c
+++ b/drivers/ieee1394/sbp2.c
@@ -115,8 +115,8 @@
*/
static int sbp2_max_speed = IEEE1394_SPEED_MAX;
module_param_named(max_speed, sbp2_max_speed, int, 0644);
-MODULE_PARM_DESC(max_speed, "Force max speed "
- "(3 = 800Mb/s, 2 = 400Mb/s, 1 = 200Mb/s, 0 = 100Mb/s)");
+MODULE_PARM_DESC(max_speed, "Limit data transfer speed (5 <= 3200, "
+ "4 <= 1600, 3 <= 800, 2 <= 400, 1 <= 200, 0 = 100 Mb/s)");
/*
* Set serialize_io to 0 or N to use dynamically appended lists of command ORBs.
@@ -256,7 +256,7 @@ static int sbp2_set_busy_timeout(struct sbp2_lu *);
static int sbp2_max_speed_and_size(struct sbp2_lu *);
-static const u8 sbp2_speedto_max_payload[] = { 0x7, 0x8, 0x9, 0xA, 0xB, 0xC };
+static const u8 sbp2_speedto_max_payload[] = { 0x7, 0x8, 0x9, 0xa, 0xa, 0xa };
static DEFINE_RWLOCK(sbp2_hi_logical_units_lock);
@@ -347,8 +347,8 @@ static struct scsi_host_template sbp2_shost_template = {
.sdev_attrs = sbp2_sysfs_sdev_attrs,
};
-/* for match-all entries in sbp2_workarounds_table */
-#define SBP2_ROM_VALUE_WILDCARD 0x1000000
+#define SBP2_ROM_VALUE_WILDCARD ~0 /* match all */
+#define SBP2_ROM_VALUE_MISSING 0xff000000 /* not present in the unit dir. */
/*
* List of devices with known bugs.
@@ -359,60 +359,70 @@ static struct scsi_host_template sbp2_shost_template = {
*/
static const struct {
u32 firmware_revision;
- u32 model_id;
+ u32 model;
unsigned workarounds;
} sbp2_workarounds_table[] = {
/* DViCO Momobay CX-1 with TSB42AA9 bridge */ {
.firmware_revision = 0x002800,
- .model_id = 0x001010,
+ .model = 0x001010,
.workarounds = SBP2_WORKAROUND_INQUIRY_36 |
SBP2_WORKAROUND_MODE_SENSE_8 |
SBP2_WORKAROUND_POWER_CONDITION,
},
/* DViCO Momobay FX-3A with TSB42AA9A bridge */ {
.firmware_revision = 0x002800,
- .model_id = 0x000000,
+ .model = 0x000000,
.workarounds = SBP2_WORKAROUND_DELAY_INQUIRY |
SBP2_WORKAROUND_POWER_CONDITION,
},
/* Initio bridges, actually only needed for some older ones */ {
.firmware_revision = 0x000200,
- .model_id = SBP2_ROM_VALUE_WILDCARD,
+ .model = SBP2_ROM_VALUE_WILDCARD,
.workarounds = SBP2_WORKAROUND_INQUIRY_36,
},
/* PL-3507 bridge with Prolific firmware */ {
.firmware_revision = 0x012800,
- .model_id = SBP2_ROM_VALUE_WILDCARD,
+ .model = SBP2_ROM_VALUE_WILDCARD,
.workarounds = SBP2_WORKAROUND_POWER_CONDITION,
},
/* Symbios bridge */ {
.firmware_revision = 0xa0b800,
- .model_id = SBP2_ROM_VALUE_WILDCARD,
+ .model = SBP2_ROM_VALUE_WILDCARD,
.workarounds = SBP2_WORKAROUND_128K_MAX_TRANS,
},
/* Datafab MD2-FW2 with Symbios/LSILogic SYM13FW500 bridge */ {
.firmware_revision = 0x002600,
- .model_id = SBP2_ROM_VALUE_WILDCARD,
+ .model = SBP2_ROM_VALUE_WILDCARD,
.workarounds = SBP2_WORKAROUND_128K_MAX_TRANS,
},
+ /*
+ * iPod 2nd generation: needs 128k max transfer size workaround
+ * iPod 3rd generation: needs fix capacity workaround
+ */
+ {
+ .firmware_revision = 0x0a2700,
+ .model = 0x000000,
+ .workarounds = SBP2_WORKAROUND_128K_MAX_TRANS |
+ SBP2_WORKAROUND_FIX_CAPACITY,
+ },
/* iPod 4th generation */ {
.firmware_revision = 0x0a2700,
- .model_id = 0x000021,
+ .model = 0x000021,
.workarounds = SBP2_WORKAROUND_FIX_CAPACITY,
},
/* iPod mini */ {
.firmware_revision = 0x0a2700,
- .model_id = 0x000022,
+ .model = 0x000022,
.workarounds = SBP2_WORKAROUND_FIX_CAPACITY,
},
/* iPod mini */ {
.firmware_revision = 0x0a2700,
- .model_id = 0x000023,
+ .model = 0x000023,
.workarounds = SBP2_WORKAROUND_FIX_CAPACITY,
},
/* iPod Photo */ {
.firmware_revision = 0x0a2700,
- .model_id = 0x00007e,
+ .model = 0x00007e,
.workarounds = SBP2_WORKAROUND_FIX_CAPACITY,
}
};
@@ -1341,13 +1351,15 @@ static void sbp2_parse_unit_directory(struct sbp2_lu *lu,
struct csr1212_keyval *kv;
struct csr1212_dentry *dentry;
u64 management_agent_addr;
- u32 unit_characteristics, firmware_revision;
+ u32 unit_characteristics, firmware_revision, model;
unsigned workarounds;
int i;
management_agent_addr = 0;
unit_characteristics = 0;
- firmware_revision = 0;
+ firmware_revision = SBP2_ROM_VALUE_MISSING;
+ model = ud->flags & UNIT_DIRECTORY_MODEL_ID ?
+ ud->model_id : SBP2_ROM_VALUE_MISSING;
csr1212_for_each_dir_entry(ud->ne->csr, kv, ud->ud_kv, dentry) {
switch (kv->key.id) {
@@ -1388,9 +1400,9 @@ static void sbp2_parse_unit_directory(struct sbp2_lu *lu,
sbp2_workarounds_table[i].firmware_revision !=
(firmware_revision & 0xffff00))
continue;
- if (sbp2_workarounds_table[i].model_id !=
+ if (sbp2_workarounds_table[i].model !=
SBP2_ROM_VALUE_WILDCARD &&
- sbp2_workarounds_table[i].model_id != ud->model_id)
+ sbp2_workarounds_table[i].model != model)
continue;
workarounds |= sbp2_workarounds_table[i].workarounds;
break;
@@ -1403,7 +1415,7 @@ static void sbp2_parse_unit_directory(struct sbp2_lu *lu,
NODE_BUS_ARGS(ud->ne->host, ud->ne->nodeid),
workarounds, firmware_revision,
ud->vendor_id ? ud->vendor_id : ud->ne->vendor_id,
- ud->model_id);
+ model);
/* We would need one SCSI host template for each target to adjust
* max_sectors on the fly, therefore warn only. */