diff options
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/ide/legacy/umc8672.c | 58 |
1 files changed, 29 insertions, 29 deletions
diff --git a/drivers/ide/legacy/umc8672.c b/drivers/ide/legacy/umc8672.c index 43ee632a6dae..4d90badd2bda 100644 --- a/drivers/ide/legacy/umc8672.c +++ b/drivers/ide/legacy/umc8672.c @@ -19,7 +19,7 @@ */ /* - * VLB Controller Support from + * VLB Controller Support from * Wolfram Podien * Rohoefe 3 * D28832 Achim @@ -32,7 +32,7 @@ * #define UMC_DRIVE0 11 * in the beginning of the driver, which sets the speed of drive 0 to 11 (there * are some lines present). 0 - 11 are allowed speed values. These values are - * the results from the DOS speed test program supplied from UMC. 11 is the + * the results from the DOS speed test program supplied from UMC. 11 is the * highest speed (about PIO mode 3) */ #define REALLY_SLOW_IO /* some systems can safely undef this */ @@ -60,46 +60,46 @@ #define UMC_DRIVE3 1 /* In case of crash reduce speed */ static u8 current_speeds[4] = {UMC_DRIVE0, UMC_DRIVE1, UMC_DRIVE2, UMC_DRIVE3}; -static const u8 pio_to_umc [5] = {0,3,7,10,11}; /* rough guesses */ +static const u8 pio_to_umc [5] = {0, 3, 7, 10, 11}; /* rough guesses */ /* 0 1 2 3 4 5 6 7 8 9 10 11 */ static const u8 speedtab [3][12] = { - {0xf, 0xb, 0x2, 0x2, 0x2, 0x1, 0x1, 0x1, 0x1, 0x1, 0x1, 0x1 }, - {0x3, 0x2, 0x2, 0x2, 0x2, 0x2, 0x1, 0x1, 0x1, 0x1, 0x1, 0x1 }, - {0xff,0xcb,0xc0,0x58,0x36,0x33,0x23,0x22,0x21,0x11,0x10,0x0}}; + {0x0f, 0x0b, 0x02, 0x02, 0x02, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x1}, + {0x03, 0x02, 0x02, 0x02, 0x02, 0x02, 0x01, 0x01, 0x01, 0x01, 0x01, 0x1}, + {0xff, 0xcb, 0xc0, 0x58, 0x36, 0x33, 0x23, 0x22, 0x21, 0x11, 0x10, 0x0} +}; -static void out_umc (char port,char wert) +static void out_umc(char port, char wert) { - outb_p(port,0x108); - outb_p(wert,0x109); + outb_p(port, 0x108); + outb_p(wert, 0x109); } -static inline u8 in_umc (char port) +static inline u8 in_umc(char port) { - outb_p(port,0x108); + outb_p(port, 0x108); return inb_p(0x109); } -static void umc_set_speeds (u8 speeds[]) +static void umc_set_speeds(u8 speeds[]) { int i, tmp; - outb_p(0x5A,0x108); /* enable umc */ + outb_p(0x5A, 0x108); /* enable umc */ - out_umc (0xd7,(speedtab[0][speeds[2]] | (speedtab[0][speeds[3]]<<4))); - out_umc (0xd6,(speedtab[0][speeds[0]] | (speedtab[0][speeds[1]]<<4))); + out_umc(0xd7, (speedtab[0][speeds[2]] | (speedtab[0][speeds[3]]<<4))); + out_umc(0xd6, (speedtab[0][speeds[0]] | (speedtab[0][speeds[1]]<<4))); tmp = 0; - for (i = 3; i >= 0; i--) { + for (i = 3; i >= 0; i--) tmp = (tmp << 2) | speedtab[1][speeds[i]]; + out_umc(0xdc, tmp); + for (i = 0; i < 4; i++) { + out_umc(0xd0 + i, speedtab[2][speeds[i]]); + out_umc(0xd8 + i, speedtab[2][speeds[i]]); } - out_umc (0xdc,tmp); - for (i = 0;i < 4; i++) { - out_umc (0xd0+i,speedtab[2][speeds[i]]); - out_umc (0xd8+i,speedtab[2][speeds[i]]); - } - outb_p(0xa5,0x108); /* disable umc */ + outb_p(0xa5, 0x108); /* disable umc */ - printk ("umc8672: drive speeds [0 to 11]: %d %d %d %d\n", + printk("umc8672: drive speeds [0 to 11]: %d %d %d %d\n", speeds[0], speeds[1], speeds[2], speeds[3]); } @@ -115,7 +115,7 @@ static void umc_set_pio_mode(ide_drive_t *drive, const u8 pio) printk(KERN_ERR "umc8672: other interface is busy: exiting tune_umc()\n"); } else { current_speeds[drive->name[2] - 'a'] = pio_to_umc[pio]; - umc_set_speeds (current_speeds); + umc_set_speeds(current_speeds); } spin_unlock_irqrestore(&ide_lock, flags); } @@ -138,16 +138,16 @@ static int __init umc8672_probe(void) return 1; } local_irq_save(flags); - outb_p(0x5A,0x108); /* enable umc */ + outb_p(0x5A, 0x108); /* enable umc */ if (in_umc (0xd5) != 0xa0) { local_irq_restore(flags); printk(KERN_ERR "umc8672: not found\n"); release_region(0x108, 2); - return 1; + return 1; } - outb_p(0xa5,0x108); /* disable umc */ + outb_p(0xa5, 0x108); /* disable umc */ - umc_set_speeds (current_speeds); + umc_set_speeds(current_speeds); local_irq_restore(flags); memset(&hw, 0, sizeof(hw)); @@ -177,7 +177,7 @@ static int __init umc8672_probe(void) return 0; } -int probe_umc8672 = 0; +int probe_umc8672; module_param_named(probe, probe_umc8672, bool, 0); MODULE_PARM_DESC(probe, "probe for UMC8672 chipset"); |