diff options
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/mmc/host/sdhci-tegra.c | 42 |
1 files changed, 24 insertions, 18 deletions
diff --git a/drivers/mmc/host/sdhci-tegra.c b/drivers/mmc/host/sdhci-tegra.c index 4a23d6f5fdf5..0ee91e543200 100644 --- a/drivers/mmc/host/sdhci-tegra.c +++ b/drivers/mmc/host/sdhci-tegra.c @@ -54,6 +54,8 @@ #define SDMMC_VENDOR_MISC_CNTRL_SDMMC_SPARE0_ENABLE_SDR50 0x10 #define SDMMC_VENDOR_MISC_CNTRL_SDMMC_SPARE0_ENABLE_SD3_0_SUPPORT 0x20 +#define SDMMC_SDMEMCOMPPADCTRL 0x1E0 + #define SDMMC_AUTO_CAL_CONFIG 0x1E4 #define SDMMC_AUTO_CAL_CONFIG_AUTO_CAL_ENABLE 0x20000000 #define SDMMC_AUTO_CAL_CONFIG_AUTO_CAL_PD_OFFSET_SHIFT 0x8 @@ -78,6 +80,7 @@ struct tegra_sdhci_host { unsigned int card_present; struct regulator *reg_vdd_slot; struct regulator *reg_vddio; + unsigned int instance; unsigned int acquire_spinlock; }; @@ -149,6 +152,26 @@ static void tegra_sdhci_configure_capabilities(struct sdhci_host *sdhci) ctrl |= SDMMC_VENDOR_MISC_CNTRL_SDMMC_SPARE0_ENABLE_SD3_0_SUPPORT; sdhci_writel(sdhci, ctrl, SDMMC_VENDOR_MISC_CNTRL); + /* Auto calibration is present only for sdmmc1 and sdmmc3 */ + if ((host->instance ==0) || (host->instance == 2)) { + ctrl = sdhci_readl(sdhci, SDMMC_AUTO_CAL_CONFIG); + ctrl |= SDMMC_AUTO_CAL_CONFIG_AUTO_CAL_ENABLE; + /* Program Auto cal PD offset(bits 8:14) */ + ctrl &= ~(0x7F << SDMMC_AUTO_CAL_CONFIG_AUTO_CAL_PD_OFFSET_SHIFT); + ctrl |= (SDMMC_AUTO_CAL_CONFIG_AUTO_CAL_PD_OFFSET << + SDMMC_AUTO_CAL_CONFIG_AUTO_CAL_PD_OFFSET_SHIFT); + /* Program Auto cal PU offset(bits 0:6) */ + ctrl &= ~0x7F; + ctrl |= SDMMC_AUTO_CAL_CONFIG_AUTO_CAL_PU_OFFSET; + sdhci_writel(sdhci, ctrl, SDMMC_AUTO_CAL_CONFIG); + + /* Set SDMEM_COMPAD_VREF to 0x7 */ + ctrl |= sdhci_readl(sdhci, SDMMC_SDMEMCOMPPADCTRL); + ctrl &= ~0xF; + ctrl |= 0x7; + sdhci_writel(sdhci, ctrl, SDMMC_SDMEMCOMPPADCTRL); + } + tegra_sdhci_configure_tap_value(sdhci, host->tap_delay); #endif } @@ -226,24 +249,6 @@ static void tegra_sdhci_set_signalling_voltage(struct sdhci_host *sdhci, if (rc) printk(KERN_ERR "%s switching to %dV failed %d\n", mmc_hostname(sdhci->mmc), (maxV/1000000), rc); - else { -#ifndef CONFIG_ARCH_TEGRA_2x_SOC - if (signalling_voltage == MMC_1_8_VOLT_SIGNALLING) { - unsigned int val; - /* Do Auto Calibration */ - val = sdhci_readl(sdhci, SDMMC_AUTO_CAL_CONFIG); - val |= SDMMC_AUTO_CAL_CONFIG_AUTO_CAL_ENABLE; - /* Program Auto cal PD offset(bits 8:14) */ - val &= ~(0x7F << SDMMC_AUTO_CAL_CONFIG_AUTO_CAL_PD_OFFSET_SHIFT); - val |= (SDMMC_AUTO_CAL_CONFIG_AUTO_CAL_PD_OFFSET << - SDMMC_AUTO_CAL_CONFIG_AUTO_CAL_PD_OFFSET_SHIFT); - /* Program Auto cal PU offset(bits 0:6) */ - val &= ~0x7F; - val |= SDMMC_AUTO_CAL_CONFIG_AUTO_CAL_PU_OFFSET; - sdhci_writel(sdhci, val, SDMMC_AUTO_CAL_CONFIG); - } -#endif - } } static int tegra_sdhci_get_ro(struct sdhci_host *sdhci) @@ -313,6 +318,7 @@ static int __devinit tegra_sdhci_probe(struct platform_device *pdev) host->sdhci->tap_value = plat->tap_delay; #endif host->acquire_spinlock = 0; + host->instance = pdev->id; host->clk = clk_get(&pdev->dev, plat->clk_id); if (IS_ERR(host->clk)) { rc = PTR_ERR(host->clk); |