summaryrefslogtreecommitdiff
path: root/drivers
diff options
context:
space:
mode:
Diffstat (limited to 'drivers')
-rw-r--r--drivers/gpio/cs5535-gpio.c16
-rw-r--r--drivers/hid/hid-core.c1
-rw-r--r--drivers/hid/hid-egalax.c2
-rw-r--r--drivers/hid/hid-input.c21
-rw-r--r--drivers/hid/hid-tmff.c2
-rw-r--r--drivers/infiniband/core/ud_header.c30
-rw-r--r--drivers/infiniband/core/uverbs_marshall.c4
-rw-r--r--drivers/infiniband/hw/mlx4/main.c4
-rw-r--r--drivers/infiniband/hw/mlx4/qp.c10
-rw-r--r--drivers/leds/Kconfig50
-rw-r--r--drivers/macintosh/Kconfig1
-rw-r--r--drivers/net/mlx4/fw.c4
-rw-r--r--drivers/net/wan/x25_asy.c2
-rw-r--r--drivers/serial/8250.c2
-rw-r--r--drivers/serial/mfd.c24
-rw-r--r--drivers/staging/asus_oled/asus_oled.c8
-rw-r--r--drivers/staging/batman-adv/hard-interface.c19
-rw-r--r--drivers/staging/batman-adv/soft-interface.c14
-rw-r--r--drivers/staging/brcm80211/README8
-rw-r--r--drivers/staging/brcm80211/TODO2
-rw-r--r--drivers/staging/comedi/drivers/usbdux.c4
-rw-r--r--drivers/staging/easycap/easycap.h1
-rw-r--r--drivers/staging/frontier/tranzport.c2
-rw-r--r--drivers/staging/iio/accel/adis16220_core.c2
-rw-r--r--drivers/staging/intel_sst/intel_sst_stream_encoded.c2
-rw-r--r--drivers/staging/line6/control.c204
-rw-r--r--drivers/staging/line6/midi.c4
-rw-r--r--drivers/staging/line6/pcm.c4
-rw-r--r--drivers/staging/line6/pod.c32
-rw-r--r--drivers/staging/line6/toneport.c4
-rw-r--r--drivers/staging/line6/variax.c12
-rw-r--r--drivers/staging/quickstart/quickstart.c10
-rw-r--r--drivers/staging/rt2860/usb_main_dev.c1
-rw-r--r--drivers/staging/rtl8187se/r8185b_init.c30
-rw-r--r--drivers/staging/rtl8712/usb_halinit.c2
-rw-r--r--drivers/staging/samsung-laptop/samsung-laptop.c2
-rw-r--r--drivers/staging/speakup/fakekey.c1
-rw-r--r--drivers/staging/spectra/ffsport.c2
-rw-r--r--drivers/staging/udlfb/udlfb.c2
-rw-r--r--drivers/staging/winbond/sysdef.h3
-rw-r--r--drivers/staging/zram/zram_sysfs.c4
-rw-r--r--drivers/tty/tty_io.c13
-rw-r--r--drivers/tty/tty_ldisc.c2
-rw-r--r--drivers/uio/uio.c2
-rw-r--r--drivers/uio/uio_cif.c2
-rw-r--r--drivers/uio/uio_netx.c2
-rw-r--r--drivers/usb/core/hcd.c2
-rw-r--r--drivers/usb/host/ehci-pci.c12
-rw-r--r--drivers/usb/host/xhci-hub.c7
-rw-r--r--drivers/usb/host/xhci-mem.c164
-rw-r--r--drivers/usb/host/xhci.c18
-rw-r--r--drivers/usb/host/xhci.h26
-rw-r--r--drivers/usb/misc/yurex.c1
-rw-r--r--drivers/usb/musb/musb_core.c3
-rw-r--r--drivers/usb/musb/musb_gadget.c124
-rw-r--r--drivers/usb/serial/ftdi_sio.c2
-rw-r--r--drivers/usb/serial/ftdi_sio_ids.h4
-rw-r--r--drivers/usb/serial/usb-serial.c3
-rw-r--r--drivers/watchdog/Kconfig3
-rw-r--r--drivers/watchdog/bcm63xx_wdt.c42
-rw-r--r--drivers/watchdog/gef_wdt.c1
-rw-r--r--drivers/watchdog/iTCO_wdt.c8
62 files changed, 673 insertions, 320 deletions
diff --git a/drivers/gpio/cs5535-gpio.c b/drivers/gpio/cs5535-gpio.c
index e23c06893d19..599f6c9e0fbf 100644
--- a/drivers/gpio/cs5535-gpio.c
+++ b/drivers/gpio/cs5535-gpio.c
@@ -56,6 +56,18 @@ static struct cs5535_gpio_chip {
* registers, see include/linux/cs5535.h.
*/
+static void errata_outl(u32 val, unsigned long addr)
+{
+ /*
+ * According to the CS5536 errata (#36), after suspend
+ * a write to the high bank GPIO register will clear all
+ * non-selected bits; the recommended workaround is a
+ * read-modify-write operation.
+ */
+ val |= inl(addr);
+ outl(val, addr);
+}
+
static void __cs5535_gpio_set(struct cs5535_gpio_chip *chip, unsigned offset,
unsigned int reg)
{
@@ -64,7 +76,7 @@ static void __cs5535_gpio_set(struct cs5535_gpio_chip *chip, unsigned offset,
outl(1 << offset, chip->base + reg);
else
/* high bank register */
- outl(1 << (offset - 16), chip->base + 0x80 + reg);
+ errata_outl(1 << (offset - 16), chip->base + 0x80 + reg);
}
void cs5535_gpio_set(unsigned offset, unsigned int reg)
@@ -86,7 +98,7 @@ static void __cs5535_gpio_clear(struct cs5535_gpio_chip *chip, unsigned offset,
outl(1 << (offset + 16), chip->base + reg);
else
/* high bank register */
- outl(1 << offset, chip->base + 0x80 + reg);
+ errata_outl(1 << offset, chip->base + 0x80 + reg);
}
void cs5535_gpio_clear(unsigned offset, unsigned int reg)
diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c
index 515345b11ac9..88cb04e7962b 100644
--- a/drivers/hid/hid-core.c
+++ b/drivers/hid/hid-core.c
@@ -1386,6 +1386,7 @@ static const struct hid_device_id hid_blacklist[] = {
{ HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, 0xb651) },
{ HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, 0xb653) },
{ HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, 0xb654) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, 0xb65a) },
{ HID_USB_DEVICE(USB_VENDOR_ID_TOPSEED, USB_DEVICE_ID_TOPSEED_CYBERLINK) },
{ HID_USB_DEVICE(USB_VENDOR_ID_TOPSEED2, USB_DEVICE_ID_TOPSEED2_RF_COMBO) },
{ HID_USB_DEVICE(USB_VENDOR_ID_TWINHAN, USB_DEVICE_ID_TWINHAN_IR_REMOTE) },
diff --git a/drivers/hid/hid-egalax.c b/drivers/hid/hid-egalax.c
index 54b017ad258d..5a1b52e0eb85 100644
--- a/drivers/hid/hid-egalax.c
+++ b/drivers/hid/hid-egalax.c
@@ -221,7 +221,7 @@ static int egalax_probe(struct hid_device *hdev, const struct hid_device_id *id)
struct egalax_data *td;
struct hid_report *report;
- td = kmalloc(sizeof(struct egalax_data), GFP_KERNEL);
+ td = kzalloc(sizeof(struct egalax_data), GFP_KERNEL);
if (!td) {
dev_err(&hdev->dev, "cannot allocate eGalax data\n");
return -ENOMEM;
diff --git a/drivers/hid/hid-input.c b/drivers/hid/hid-input.c
index bb0b3659437b..d8d372bae3cc 100644
--- a/drivers/hid/hid-input.c
+++ b/drivers/hid/hid-input.c
@@ -174,7 +174,7 @@ static int hidinput_setkeycode(struct input_dev *dev,
clear_bit(*old_keycode, dev->keybit);
set_bit(usage->code, dev->keybit);
- dbg_hid(KERN_DEBUG "Assigned keycode %d to HID usage code %x\n",
+ dbg_hid("Assigned keycode %d to HID usage code %x\n",
usage->code, usage->hid);
/*
@@ -203,8 +203,8 @@ static int hidinput_setkeycode(struct input_dev *dev,
*
* as seen in the HID specification v1.11 6.2.2.7 Global Items.
*
- * Only exponent 1 length units are processed. Centimeters are converted to
- * inches. Degrees are converted to radians.
+ * Only exponent 1 length units are processed. Centimeters and inches are
+ * converted to millimeters. Degrees are converted to radians.
*/
static __s32 hidinput_calc_abs_res(const struct hid_field *field, __u16 code)
{
@@ -225,13 +225,16 @@ static __s32 hidinput_calc_abs_res(const struct hid_field *field, __u16 code)
*/
if (code == ABS_X || code == ABS_Y || code == ABS_Z) {
if (field->unit == 0x11) { /* If centimeters */
- /* Convert to inches */
- prev = logical_extents;
- logical_extents *= 254;
- if (logical_extents < prev)
+ /* Convert to millimeters */
+ unit_exponent += 1;
+ } else if (field->unit == 0x13) { /* If inches */
+ /* Convert to millimeters */
+ prev = physical_extents;
+ physical_extents *= 254;
+ if (physical_extents < prev)
return 0;
- unit_exponent += 2;
- } else if (field->unit != 0x13) { /* If not inches */
+ unit_exponent -= 1;
+ } else {
return 0;
}
} else if (code == ABS_RX || code == ABS_RY || code == ABS_RZ) {
diff --git a/drivers/hid/hid-tmff.c b/drivers/hid/hid-tmff.c
index 15434c814793..25be4e1461bd 100644
--- a/drivers/hid/hid-tmff.c
+++ b/drivers/hid/hid-tmff.c
@@ -256,6 +256,8 @@ static const struct hid_device_id tm_devices[] = {
.driver_data = (unsigned long)ff_joystick },
{ HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, 0xb654), /* FGT Force Feedback Wheel */
.driver_data = (unsigned long)ff_joystick },
+ { HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, 0xb65a), /* F430 Force Feedback Wheel */
+ .driver_data = (unsigned long)ff_joystick },
{ }
};
MODULE_DEVICE_TABLE(hid, tm_devices);
diff --git a/drivers/infiniband/core/ud_header.c b/drivers/infiniband/core/ud_header.c
index bb7e19280821..9b737ff133e2 100644
--- a/drivers/infiniband/core/ud_header.c
+++ b/drivers/infiniband/core/ud_header.c
@@ -278,36 +278,6 @@ void ib_ud_header_init(int payload_bytes,
EXPORT_SYMBOL(ib_ud_header_init);
/**
- * ib_lrh_header_pack - Pack LRH header struct into wire format
- * @lrh:unpacked LRH header struct
- * @buf:Buffer to pack into
- *
- * ib_lrh_header_pack() packs the LRH header structure @lrh into
- * wire format in the buffer @buf.
- */
-int ib_lrh_header_pack(struct ib_unpacked_lrh *lrh, void *buf)
-{
- ib_pack(lrh_table, ARRAY_SIZE(lrh_table), lrh, buf);
- return 0;
-}
-EXPORT_SYMBOL(ib_lrh_header_pack);
-
-/**
- * ib_lrh_header_unpack - Unpack LRH structure from wire format
- * @lrh:unpacked LRH header struct
- * @buf:Buffer to pack into
- *
- * ib_lrh_header_unpack() unpacks the LRH header structure from
- * wire format (in buf) into @lrh.
- */
-int ib_lrh_header_unpack(void *buf, struct ib_unpacked_lrh *lrh)
-{
- ib_unpack(lrh_table, ARRAY_SIZE(lrh_table), buf, lrh);
- return 0;
-}
-EXPORT_SYMBOL(ib_lrh_header_unpack);
-
-/**
* ib_ud_header_pack - Pack UD header struct into wire format
* @header:UD header struct
* @buf:Buffer to pack into
diff --git a/drivers/infiniband/core/uverbs_marshall.c b/drivers/infiniband/core/uverbs_marshall.c
index 5440da0e59b4..1b1146f87124 100644
--- a/drivers/infiniband/core/uverbs_marshall.c
+++ b/drivers/infiniband/core/uverbs_marshall.c
@@ -40,18 +40,21 @@ void ib_copy_ah_attr_to_user(struct ib_uverbs_ah_attr *dst,
dst->grh.sgid_index = src->grh.sgid_index;
dst->grh.hop_limit = src->grh.hop_limit;
dst->grh.traffic_class = src->grh.traffic_class;
+ memset(&dst->grh.reserved, 0, sizeof(dst->grh.reserved));
dst->dlid = src->dlid;
dst->sl = src->sl;
dst->src_path_bits = src->src_path_bits;
dst->static_rate = src->static_rate;
dst->is_global = src->ah_flags & IB_AH_GRH ? 1 : 0;
dst->port_num = src->port_num;
+ dst->reserved = 0;
}
EXPORT_SYMBOL(ib_copy_ah_attr_to_user);
void ib_copy_qp_attr_to_user(struct ib_uverbs_qp_attr *dst,
struct ib_qp_attr *src)
{
+ dst->qp_state = src->qp_state;
dst->cur_qp_state = src->cur_qp_state;
dst->path_mtu = src->path_mtu;
dst->path_mig_state = src->path_mig_state;
@@ -83,6 +86,7 @@ void ib_copy_qp_attr_to_user(struct ib_uverbs_qp_attr *dst,
dst->rnr_retry = src->rnr_retry;
dst->alt_port_num = src->alt_port_num;
dst->alt_timeout = src->alt_timeout;
+ memset(dst->reserved, 0, sizeof(dst->reserved));
}
EXPORT_SYMBOL(ib_copy_qp_attr_to_user);
diff --git a/drivers/infiniband/hw/mlx4/main.c b/drivers/infiniband/hw/mlx4/main.c
index bf3e20cd0298..30e09caf0da9 100644
--- a/drivers/infiniband/hw/mlx4/main.c
+++ b/drivers/infiniband/hw/mlx4/main.c
@@ -219,7 +219,7 @@ static int eth_link_query_port(struct ib_device *ibdev, u8 port,
struct net_device *ndev;
enum ib_mtu tmp;
- props->active_width = IB_WIDTH_4X;
+ props->active_width = IB_WIDTH_1X;
props->active_speed = 4;
props->port_cap_flags = IB_PORT_CM_SUP;
props->gid_tbl_len = to_mdev(ibdev)->dev->caps.gid_table_len[port];
@@ -242,7 +242,7 @@ static int eth_link_query_port(struct ib_device *ibdev, u8 port,
tmp = iboe_get_mtu(ndev->mtu);
props->active_mtu = tmp ? min(props->max_mtu, tmp) : IB_MTU_256;
- props->state = netif_running(ndev) && netif_oper_up(ndev) ?
+ props->state = (netif_running(ndev) && netif_carrier_ok(ndev)) ?
IB_PORT_ACTIVE : IB_PORT_DOWN;
props->phys_state = state_to_phys_state(props->state);
diff --git a/drivers/infiniband/hw/mlx4/qp.c b/drivers/infiniband/hw/mlx4/qp.c
index 9a7794ac34c1..2001f20a4361 100644
--- a/drivers/infiniband/hw/mlx4/qp.c
+++ b/drivers/infiniband/hw/mlx4/qp.c
@@ -1816,6 +1816,11 @@ int mlx4_ib_post_send(struct ib_qp *ibqp, struct ib_send_wr *wr,
ctrl->fence_size = (wr->send_flags & IB_SEND_FENCE ?
MLX4_WQE_CTRL_FENCE : 0) | size;
+ if (be16_to_cpu(vlan) < 0x1000) {
+ ctrl->ins_vlan = 1 << 6;
+ ctrl->vlan_tag = vlan;
+ }
+
/*
* Make sure descriptor is fully written before
* setting ownership bit (because HW can start
@@ -1831,11 +1836,6 @@ int mlx4_ib_post_send(struct ib_qp *ibqp, struct ib_send_wr *wr,
ctrl->owner_opcode = mlx4_ib_opcode[wr->opcode] |
(ind & qp->sq.wqe_cnt ? cpu_to_be32(1 << 31) : 0) | blh;
- if (be16_to_cpu(vlan) < 0x1000) {
- ctrl->ins_vlan = 1 << 6;
- ctrl->vlan_tag = vlan;
- }
-
stamp = ind + qp->sq_spare_wqes;
ind += DIV_ROUND_UP(size * 16, 1U << qp->sq.wqe_shift);
diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
index 77b8fd20cd90..6f190f4cdbc0 100644
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -7,20 +7,20 @@ menuconfig NEW_LEDS
This is not related to standard keyboard LEDs which are controlled
via the input system.
-if NEW_LEDS
-
config LEDS_CLASS
bool "LED Class Support"
+ depends on NEW_LEDS
help
This option enables the led sysfs class in /sys/class/leds. You'll
need this to do anything useful with LEDs. If unsure, say N.
-if LEDS_CLASS
+if NEW_LEDS
comment "LED drivers"
config LEDS_88PM860X
tristate "LED Support for Marvell 88PM860x PMIC"
+ depends on LEDS_CLASS
depends on MFD_88PM860X
help
This option enables support for on-chip LED drivers found on Marvell
@@ -28,6 +28,7 @@ config LEDS_88PM860X
config LEDS_ATMEL_PWM
tristate "LED Support using Atmel PWM outputs"
+ depends on LEDS_CLASS
depends on ATMEL_PWM
help
This option enables support for LEDs driven using outputs
@@ -35,6 +36,7 @@ config LEDS_ATMEL_PWM
config LEDS_LOCOMO
tristate "LED Support for Locomo device"
+ depends on LEDS_CLASS
depends on SHARP_LOCOMO
help
This option enables support for the LEDs on Sharp Locomo.
@@ -42,6 +44,7 @@ config LEDS_LOCOMO
config LEDS_MIKROTIK_RB532
tristate "LED Support for Mikrotik Routerboard 532"
+ depends on LEDS_CLASS
depends on MIKROTIK_RB532
help
This option enables support for the so called "User LED" of
@@ -49,6 +52,7 @@ config LEDS_MIKROTIK_RB532
config LEDS_S3C24XX
tristate "LED Support for Samsung S3C24XX GPIO LEDs"
+ depends on LEDS_CLASS
depends on ARCH_S3C2410
help
This option enables support for LEDs connected to GPIO lines
@@ -56,12 +60,14 @@ config LEDS_S3C24XX
config LEDS_AMS_DELTA
tristate "LED Support for the Amstrad Delta (E3)"
+ depends on LEDS_CLASS
depends on MACH_AMS_DELTA
help
This option enables support for the LEDs on Amstrad Delta (E3).
config LEDS_NET48XX
tristate "LED Support for Soekris net48xx series Error LED"
+ depends on LEDS_CLASS
depends on SCx200_GPIO
help
This option enables support for the Soekris net4801 and net4826 error
@@ -79,18 +85,21 @@ config LEDS_NET5501
config LEDS_FSG
tristate "LED Support for the Freecom FSG-3"
+ depends on LEDS_CLASS
depends on MACH_FSG
help
This option enables support for the LEDs on the Freecom FSG-3.
config LEDS_WRAP
tristate "LED Support for the WRAP series LEDs"
+ depends on LEDS_CLASS
depends on SCx200_GPIO
help
This option enables support for the PCEngines WRAP programmable LEDs.
config LEDS_ALIX2
tristate "LED Support for ALIX.2 and ALIX.3 series"
+ depends on LEDS_CLASS
depends on X86 && !GPIO_CS5535 && !CS5535_GPIO
help
This option enables support for the PCEngines ALIX.2 and ALIX.3 LEDs.
@@ -98,12 +107,14 @@ config LEDS_ALIX2
config LEDS_H1940
tristate "LED Support for iPAQ H1940 device"
+ depends on LEDS_CLASS
depends on ARCH_H1940
help
This option enables support for the LEDs on the h1940.
config LEDS_COBALT_QUBE
tristate "LED Support for the Cobalt Qube series front LED"
+ depends on LEDS_CLASS
depends on MIPS_COBALT
help
This option enables support for the front LED on Cobalt Qube series
@@ -117,6 +128,7 @@ config LEDS_COBALT_RAQ
config LEDS_SUNFIRE
tristate "LED support for SunFire servers."
+ depends on LEDS_CLASS
depends on SPARC64
select LEDS_TRIGGERS
help
@@ -125,6 +137,7 @@ config LEDS_SUNFIRE
config LEDS_HP6XX
tristate "LED Support for the HP Jornada 6xx"
+ depends on LEDS_CLASS
depends on SH_HP6XX
help
This option enables LED support for the handheld
@@ -132,6 +145,7 @@ config LEDS_HP6XX
config LEDS_PCA9532
tristate "LED driver for PCA9532 dimmer"
+ depends on LEDS_CLASS
depends on I2C && INPUT && EXPERIMENTAL
help
This option enables support for NXP pca9532
@@ -140,6 +154,7 @@ config LEDS_PCA9532
config LEDS_GPIO
tristate "LED Support for GPIO connected LEDs"
+ depends on LEDS_CLASS
depends on GENERIC_GPIO
help
This option enables support for the LEDs connected to GPIO
@@ -167,6 +182,7 @@ config LEDS_GPIO_OF
config LEDS_LP3944
tristate "LED Support for N.S. LP3944 (Fun Light) I2C chip"
+ depends on LEDS_CLASS
depends on I2C
help
This option enables support for LEDs connected to the National
@@ -196,6 +212,7 @@ config LEDS_LP5523
config LEDS_CLEVO_MAIL
tristate "Mail LED on Clevo notebook"
+ depends on LEDS_CLASS
depends on X86 && SERIO_I8042 && DMI
help
This driver makes the mail LED accessible from userspace
@@ -226,6 +243,7 @@ config LEDS_CLEVO_MAIL
config LEDS_PCA955X
tristate "LED Support for PCA955x I2C chips"
+ depends on LEDS_CLASS
depends on I2C
help
This option enables support for LEDs connected to PCA955x
@@ -234,6 +252,7 @@ config LEDS_PCA955X
config LEDS_WM831X_STATUS
tristate "LED support for status LEDs on WM831x PMICs"
+ depends on LEDS_CLASS
depends on MFD_WM831X
help
This option enables support for the status LEDs of the WM831x
@@ -241,6 +260,7 @@ config LEDS_WM831X_STATUS
config LEDS_WM8350
tristate "LED Support for WM8350 AudioPlus PMIC"
+ depends on LEDS_CLASS
depends on MFD_WM8350
help
This option enables support for LEDs driven by the Wolfson
@@ -248,6 +268,7 @@ config LEDS_WM8350
config LEDS_DA903X
tristate "LED Support for DA9030/DA9034 PMIC"
+ depends on LEDS_CLASS
depends on PMIC_DA903X
help
This option enables support for on-chip LED drivers found
@@ -255,6 +276,7 @@ config LEDS_DA903X
config LEDS_DAC124S085
tristate "LED Support for DAC124S085 SPI DAC"
+ depends on LEDS_CLASS
depends on SPI
help
This option enables support for DAC124S085 SPI DAC from NatSemi,
@@ -262,18 +284,21 @@ config LEDS_DAC124S085
config LEDS_PWM
tristate "PWM driven LED Support"
+ depends on LEDS_CLASS
depends on HAVE_PWM
help
This option enables support for pwm driven LEDs
config LEDS_REGULATOR
tristate "REGULATOR driven LED support"
+ depends on LEDS_CLASS
depends on REGULATOR
help
This option enables support for regulator driven LEDs.
config LEDS_BD2802
tristate "LED driver for BD2802 RGB LED"
+ depends on LEDS_CLASS
depends on I2C
help
This option enables support for BD2802GU RGB LED driver chips
@@ -281,6 +306,7 @@ config LEDS_BD2802
config LEDS_INTEL_SS4200
tristate "LED driver for Intel NAS SS4200 series"
+ depends on LEDS_CLASS
depends on PCI && DMI
help
This option enables support for the Intel SS4200 series of
@@ -290,6 +316,7 @@ config LEDS_INTEL_SS4200
config LEDS_LT3593
tristate "LED driver for LT3593 controllers"
+ depends on LEDS_CLASS
depends on GENERIC_GPIO
help
This option enables support for LEDs driven by a Linear Technology
@@ -298,6 +325,7 @@ config LEDS_LT3593
config LEDS_ADP5520
tristate "LED Support for ADP5520/ADP5501 PMIC"
+ depends on LEDS_CLASS
depends on PMIC_ADP5520
help
This option enables support for on-chip LED drivers found
@@ -308,6 +336,7 @@ config LEDS_ADP5520
config LEDS_DELL_NETBOOKS
tristate "External LED on Dell Business Netbooks"
+ depends on LEDS_CLASS
depends on X86 && ACPI_WMI
help
This adds support for the Latitude 2100 and similar
@@ -315,6 +344,7 @@ config LEDS_DELL_NETBOOKS
config LEDS_MC13783
tristate "LED Support for MC13783 PMIC"
+ depends on LEDS_CLASS
depends on MFD_MC13783
help
This option enable support for on-chip LED drivers found
@@ -322,6 +352,7 @@ config LEDS_MC13783
config LEDS_NS2
tristate "LED support for Network Space v2 GPIO LEDs"
+ depends on LEDS_CLASS
depends on MACH_NETSPACE_V2 || MACH_INETSPACE_V2 || MACH_NETSPACE_MAX_V2 || D2NET_V2
default y
help
@@ -340,17 +371,17 @@ config LEDS_NETXBIG
config LEDS_TRIGGERS
bool "LED Trigger support"
+ depends on LEDS_CLASS
help
This option enables trigger support for the leds class.
These triggers allow kernel events to drive the LEDs and can
be configured via sysfs. If unsure, say Y.
-if LEDS_TRIGGERS
-
comment "LED Triggers"
config LEDS_TRIGGER_TIMER
tristate "LED Timer Trigger"
+ depends on LEDS_TRIGGERS
help
This allows LEDs to be controlled by a programmable timer
via sysfs. Some LED hardware can be programmed to start
@@ -362,12 +393,14 @@ config LEDS_TRIGGER_TIMER
config LEDS_TRIGGER_IDE_DISK
bool "LED IDE Disk Trigger"
depends on IDE_GD_ATA
+ depends on LEDS_TRIGGERS
help
This allows LEDs to be controlled by IDE disk activity.
If unsure, say Y.
config LEDS_TRIGGER_HEARTBEAT
tristate "LED Heartbeat Trigger"
+ depends on LEDS_TRIGGERS
help
This allows LEDs to be controlled by a CPU load average.
The flash frequency is a hyperbolic function of the 1-minute
@@ -376,6 +409,7 @@ config LEDS_TRIGGER_HEARTBEAT
config LEDS_TRIGGER_BACKLIGHT
tristate "LED backlight Trigger"
+ depends on LEDS_TRIGGERS
help
This allows LEDs to be controlled as a backlight device: they
turn off and on when the display is blanked and unblanked.
@@ -384,6 +418,7 @@ config LEDS_TRIGGER_BACKLIGHT
config LEDS_TRIGGER_GPIO
tristate "LED GPIO Trigger"
+ depends on LEDS_TRIGGERS
depends on GPIOLIB
help
This allows LEDs to be controlled by gpio events. It's good
@@ -396,6 +431,7 @@ config LEDS_TRIGGER_GPIO
config LEDS_TRIGGER_DEFAULT_ON
tristate "LED Default ON Trigger"
+ depends on LEDS_TRIGGERS
help
This allows LEDs to be initialised in the ON state.
If unsure, say Y.
@@ -403,8 +439,4 @@ config LEDS_TRIGGER_DEFAULT_ON
comment "iptables trigger is under Netfilter config (LED target)"
depends on LEDS_TRIGGERS
-endif # LEDS_TRIGGERS
-
-endif # LEDS_CLASS
-
endif # NEW_LEDS
diff --git a/drivers/macintosh/Kconfig b/drivers/macintosh/Kconfig
index 3d7355ff7308..fa51af11c6f1 100644
--- a/drivers/macintosh/Kconfig
+++ b/drivers/macintosh/Kconfig
@@ -102,6 +102,7 @@ config ADB_PMU_LED
config ADB_PMU_LED_IDE
bool "Use front LED as IDE LED by default"
depends on ADB_PMU_LED
+ depends on LEDS_CLASS
select LEDS_TRIGGERS
select LEDS_TRIGGER_IDE_DISK
help
diff --git a/drivers/net/mlx4/fw.c b/drivers/net/mlx4/fw.c
index b68eee2414c2..7a7e18ba278a 100644
--- a/drivers/net/mlx4/fw.c
+++ b/drivers/net/mlx4/fw.c
@@ -289,6 +289,10 @@ int mlx4_QUERY_DEV_CAP(struct mlx4_dev *dev, struct mlx4_dev_cap *dev_cap)
MLX4_GET(field, outbox, QUERY_DEV_CAP_LOG_BF_REG_SZ_OFFSET);
dev_cap->bf_reg_size = 1 << (field & 0x1f);
MLX4_GET(field, outbox, QUERY_DEV_CAP_LOG_MAX_BF_REGS_PER_PAGE_OFFSET);
+ if ((1 << (field & 0x3f)) > (PAGE_SIZE / dev_cap->bf_reg_size)) {
+ mlx4_warn(dev, "firmware bug: log2 # of blue flame regs is invalid (%d), forcing 3\n", field & 0x1f);
+ field = 3;
+ }
dev_cap->bf_regs_per_page = 1 << (field & 0x3f);
mlx4_dbg(dev, "BlueFlame available (reg size %d, regs/page %d)\n",
dev_cap->bf_reg_size, dev_cap->bf_regs_per_page);
diff --git a/drivers/net/wan/x25_asy.c b/drivers/net/wan/x25_asy.c
index cf05504d9511..24297b274cd4 100644
--- a/drivers/net/wan/x25_asy.c
+++ b/drivers/net/wan/x25_asy.c
@@ -577,7 +577,7 @@ static int x25_asy_open_tty(struct tty_struct *tty)
if (err)
return err;
/* Done. We have linked the TTY line to a channel. */
- return sl->dev->base_addr;
+ return 0;
}
diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c
index 4d8e14b7aa93..09a550860dcf 100644
--- a/drivers/serial/8250.c
+++ b/drivers/serial/8250.c
@@ -2872,7 +2872,7 @@ static struct console serial8250_console = {
.device = uart_console_device,
.setup = serial8250_console_setup,
.early_setup = serial8250_console_early_setup,
- .flags = CON_PRINTBUFFER,
+ .flags = CON_PRINTBUFFER | CON_ANYTIME,
.index = -1,
.data = &serial8250_reg,
};
diff --git a/drivers/serial/mfd.c b/drivers/serial/mfd.c
index 5fc699e929dc..d40010a22ecd 100644
--- a/drivers/serial/mfd.c
+++ b/drivers/serial/mfd.c
@@ -900,8 +900,7 @@ serial_hsu_set_termios(struct uart_port *port, struct ktermios *termios,
unsigned char cval, fcr = 0;
unsigned long flags;
unsigned int baud, quot;
- u32 mul = 0x3600;
- u32 ps = 0x10;
+ u32 ps, mul;
switch (termios->c_cflag & CSIZE) {
case CS5:
@@ -943,31 +942,24 @@ serial_hsu_set_termios(struct uart_port *port, struct ktermios *termios,
baud = uart_get_baud_rate(port, termios, old, 0, 4000000);
quot = 1;
+ ps = 0x10;
+ mul = 0x3600;
switch (baud) {
case 3500000:
mul = 0x3345;
ps = 0xC;
break;
- case 3000000:
- mul = 0x2EE0;
- break;
- case 2500000:
- mul = 0x2710;
- break;
- case 2000000:
- mul = 0x1F40;
- break;
case 1843200:
mul = 0x2400;
break;
+ case 3000000:
+ case 2500000:
+ case 2000000:
case 1500000:
- mul = 0x1770;
- break;
case 1000000:
- mul = 0xFA0;
- break;
case 500000:
- mul = 0x7D0;
+ /* mul/ps/quot = 0x9C4/0x10/0x1 will make a 500000 bps */
+ mul = baud / 500000 * 0x9C4;
break;
default:
/* Use uart_get_divisor to get quot for other baud rates */
diff --git a/drivers/staging/asus_oled/asus_oled.c b/drivers/staging/asus_oled/asus_oled.c
index 8c95d8c2a4f4..016c6f7f8630 100644
--- a/drivers/staging/asus_oled/asus_oled.c
+++ b/drivers/staging/asus_oled/asus_oled.c
@@ -620,13 +620,13 @@ static ssize_t class_set_picture(struct device *device,
#define ASUS_OLED_DEVICE_ATTR(_file) dev_attr_asus_oled_##_file
-static DEVICE_ATTR(asus_oled_enabled, S_IWUGO | S_IRUGO,
+static DEVICE_ATTR(asus_oled_enabled, S_IWUSR | S_IRUGO,
get_enabled, set_enabled);
-static DEVICE_ATTR(asus_oled_picture, S_IWUGO , NULL, set_picture);
+static DEVICE_ATTR(asus_oled_picture, S_IWUSR , NULL, set_picture);
-static DEVICE_ATTR(enabled, S_IWUGO | S_IRUGO,
+static DEVICE_ATTR(enabled, S_IWUSR | S_IRUGO,
class_get_enabled, class_set_enabled);
-static DEVICE_ATTR(picture, S_IWUGO, NULL, class_set_picture);
+static DEVICE_ATTR(picture, S_IWUSR, NULL, class_set_picture);
static int asus_oled_probe(struct usb_interface *interface,
const struct usb_device_id *id)
diff --git a/drivers/staging/batman-adv/hard-interface.c b/drivers/staging/batman-adv/hard-interface.c
index b68a7e5173be..d85de82f941a 100644
--- a/drivers/staging/batman-adv/hard-interface.c
+++ b/drivers/staging/batman-adv/hard-interface.c
@@ -463,9 +463,6 @@ static void hardif_remove_interface(struct batman_if *batman_if)
return;
batman_if->if_status = IF_TO_BE_REMOVED;
-
- /* caller must take if_list_lock */
- list_del_rcu(&batman_if->list);
synchronize_rcu();
sysfs_del_hardif(&batman_if->hardif_obj);
hardif_put(batman_if);
@@ -474,13 +471,21 @@ static void hardif_remove_interface(struct batman_if *batman_if)
void hardif_remove_interfaces(void)
{
struct batman_if *batman_if, *batman_if_tmp;
+ struct list_head if_queue;
+
+ INIT_LIST_HEAD(&if_queue);
- rtnl_lock();
spin_lock(&if_list_lock);
list_for_each_entry_safe(batman_if, batman_if_tmp, &if_list, list) {
- hardif_remove_interface(batman_if);
+ list_del_rcu(&batman_if->list);
+ list_add_tail(&batman_if->list, &if_queue);
}
spin_unlock(&if_list_lock);
+
+ rtnl_lock();
+ list_for_each_entry_safe(batman_if, batman_if_tmp, &if_queue, list) {
+ hardif_remove_interface(batman_if);
+ }
rtnl_unlock();
}
@@ -507,8 +512,10 @@ static int hard_if_event(struct notifier_block *this,
break;
case NETDEV_UNREGISTER:
spin_lock(&if_list_lock);
- hardif_remove_interface(batman_if);
+ list_del_rcu(&batman_if->list);
spin_unlock(&if_list_lock);
+
+ hardif_remove_interface(batman_if);
break;
case NETDEV_CHANGEMTU:
if (batman_if->soft_iface)
diff --git a/drivers/staging/batman-adv/soft-interface.c b/drivers/staging/batman-adv/soft-interface.c
index 3904db9ce7b1..0e996181daf7 100644
--- a/drivers/staging/batman-adv/soft-interface.c
+++ b/drivers/staging/batman-adv/soft-interface.c
@@ -194,14 +194,15 @@ void interface_rx(struct net_device *soft_iface,
struct bat_priv *priv = netdev_priv(soft_iface);
/* check if enough space is available for pulling, and pull */
- if (!pskb_may_pull(skb, hdr_size)) {
- kfree_skb(skb);
- return;
- }
+ if (!pskb_may_pull(skb, hdr_size))
+ goto dropped;
+
skb_pull_rcsum(skb, hdr_size);
/* skb_set_mac_header(skb, -sizeof(struct ethhdr));*/
/* skb->dev & skb->pkt_type are set here */
+ if (unlikely(!pskb_may_pull(skb, ETH_HLEN)))
+ goto dropped;
skb->protocol = eth_type_trans(skb, soft_iface);
/* should not be neccesary anymore as we use skb_pull_rcsum()
@@ -216,6 +217,11 @@ void interface_rx(struct net_device *soft_iface,
soft_iface->last_rx = jiffies;
netif_rx(skb);
+ return;
+
+dropped:
+ kfree_skb(skb);
+ return;
}
#ifdef HAVE_NET_DEVICE_OPS
diff --git a/drivers/staging/brcm80211/README b/drivers/staging/brcm80211/README
index c8f1cf1b4409..a27bb0b4f581 100644
--- a/drivers/staging/brcm80211/README
+++ b/drivers/staging/brcm80211/README
@@ -88,7 +88,9 @@ with the driver.
Contact Info:
=============
-Brett Rudley brudley@broadcom.com
-Henry Ptasinski henryp@broadcom.com
-Dowan Kim dowan@broadcom.com
+Brett Rudley brudley@broadcom.com
+Henry Ptasinski henryp@broadcom.com
+Dowan Kim dowan@broadcom.com
+Roland Vossen rvossen@broadcom.com
+Arend van Spriel arend@broadcom.com
diff --git a/drivers/staging/brcm80211/TODO b/drivers/staging/brcm80211/TODO
index dbf904184899..24ebadbe4241 100644
--- a/drivers/staging/brcm80211/TODO
+++ b/drivers/staging/brcm80211/TODO
@@ -46,4 +46,6 @@ Contact
Brett Rudley <brudley@broadcom.com>
Henry Ptasinski <henryp@broadcom.com>
Dowan Kim <dowan@broadcom.com>
+Roland Vossen <rvossen@broadcom.com>
+Arend van Spriel <arend@broadcom.com>
diff --git a/drivers/staging/comedi/drivers/usbdux.c b/drivers/staging/comedi/drivers/usbdux.c
index 1f177a67ff11..de784ff08caa 100644
--- a/drivers/staging/comedi/drivers/usbdux.c
+++ b/drivers/staging/comedi/drivers/usbdux.c
@@ -2295,8 +2295,8 @@ static void tidy_up(struct usbduxsub *usbduxsub_tmp)
usbduxsub_tmp->inBuffer = NULL;
kfree(usbduxsub_tmp->insnBuffer);
usbduxsub_tmp->insnBuffer = NULL;
- kfree(usbduxsub_tmp->inBuffer);
- usbduxsub_tmp->inBuffer = NULL;
+ kfree(usbduxsub_tmp->outBuffer);
+ usbduxsub_tmp->outBuffer = NULL;
kfree(usbduxsub_tmp->dac_commands);
usbduxsub_tmp->dac_commands = NULL;
kfree(usbduxsub_tmp->dux_commands);
diff --git a/drivers/staging/easycap/easycap.h b/drivers/staging/easycap/easycap.h
index 25961c23dc0f..884263b2775d 100644
--- a/drivers/staging/easycap/easycap.h
+++ b/drivers/staging/easycap/easycap.h
@@ -75,6 +75,7 @@
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/slab.h>
+#include <linux/smp_lock.h>
#include <linux/module.h>
#include <linux/kref.h>
#include <linux/usb.h>
diff --git a/drivers/staging/frontier/tranzport.c b/drivers/staging/frontier/tranzport.c
index a145a15cfdb3..8894ab14f167 100644
--- a/drivers/staging/frontier/tranzport.c
+++ b/drivers/staging/frontier/tranzport.c
@@ -204,7 +204,7 @@ static void usb_tranzport_abort_transfers(struct usb_tranzport *dev)
t->value = temp; \
return count; \
} \
- static DEVICE_ATTR(value, S_IWUGO | S_IRUGO, show_##value, set_##value);
+ static DEVICE_ATTR(value, S_IWUSR | S_IRUGO, show_##value, set_##value);
show_int(enable);
show_int(offline);
diff --git a/drivers/staging/iio/accel/adis16220_core.c b/drivers/staging/iio/accel/adis16220_core.c
index c86d1498737d..1c1e98aee2d9 100644
--- a/drivers/staging/iio/accel/adis16220_core.c
+++ b/drivers/staging/iio/accel/adis16220_core.c
@@ -507,7 +507,7 @@ static IIO_DEVICE_ATTR(reset, S_IWUSR, NULL,
adis16220_write_reset, 0);
#define IIO_DEV_ATTR_CAPTURE(_store) \
- IIO_DEVICE_ATTR(capture, S_IWUGO, NULL, _store, 0)
+ IIO_DEVICE_ATTR(capture, S_IWUSR, NULL, _store, 0)
static IIO_DEV_ATTR_CAPTURE(adis16220_write_capture);
diff --git a/drivers/staging/intel_sst/intel_sst_stream_encoded.c b/drivers/staging/intel_sst/intel_sst_stream_encoded.c
index fbae39fda5c0..5c455608b024 100644
--- a/drivers/staging/intel_sst/intel_sst_stream_encoded.c
+++ b/drivers/staging/intel_sst/intel_sst_stream_encoded.c
@@ -1269,7 +1269,7 @@ finish:
dbufs->output_bytes_produced = total_output;
str_info->status = str_info->prev;
str_info->prev = STREAM_DECODE;
- str_info->decode_ibuf = NULL;
kfree(str_info->decode_ibuf);
+ str_info->decode_ibuf = NULL;
return retval;
}
diff --git a/drivers/staging/line6/control.c b/drivers/staging/line6/control.c
index 040e25ca6d33..67e23b6e2d35 100644
--- a/drivers/staging/line6/control.c
+++ b/drivers/staging/line6/control.c
@@ -266,210 +266,210 @@ VARIAX_PARAM_R(float, mix2);
VARIAX_PARAM_R(float, mix1);
VARIAX_PARAM_R(int, pickup_wiring);
-static DEVICE_ATTR(tweak, S_IWUGO | S_IRUGO, pod_get_tweak, pod_set_tweak);
-static DEVICE_ATTR(wah_position, S_IWUGO | S_IRUGO, pod_get_wah_position,
+static DEVICE_ATTR(tweak, S_IWUSR | S_IRUGO, pod_get_tweak, pod_set_tweak);
+static DEVICE_ATTR(wah_position, S_IWUSR | S_IRUGO, pod_get_wah_position,
pod_set_wah_position);
-static DEVICE_ATTR(compression_gain, S_IWUGO | S_IRUGO,
+static DEVICE_ATTR(compression_gain, S_IWUSR | S_IRUGO,
pod_get_compression_gain, pod_set_compression_gain);
-static DEVICE_ATTR(vol_pedal_position, S_IWUGO | S_IRUGO,
+static DEVICE_ATTR(vol_pedal_position, S_IWUSR | S_IRUGO,
pod_get_vol_pedal_position, pod_set_vol_pedal_position);
-static DEVICE_ATTR(compression_threshold, S_IWUGO | S_IRUGO,
+static DEVICE_ATTR(compression_threshold, S_IWUSR | S_IRUGO,
pod_get_compression_threshold,
pod_set_compression_threshold);
-static DEVICE_ATTR(pan, S_IWUGO | S_IRUGO, pod_get_pan, pod_set_pan);
-static DEVICE_ATTR(amp_model_setup, S_IWUGO | S_IRUGO, pod_get_amp_model_setup,
+static DEVICE_ATTR(pan, S_IWUSR | S_IRUGO, pod_get_pan, pod_set_pan);
+static DEVICE_ATTR(amp_model_setup, S_IWUSR | S_IRUGO, pod_get_amp_model_setup,
pod_set_amp_model_setup);
-static DEVICE_ATTR(amp_model, S_IWUGO | S_IRUGO, pod_get_amp_model,
+static DEVICE_ATTR(amp_model, S_IWUSR | S_IRUGO, pod_get_amp_model,
pod_set_amp_model);
-static DEVICE_ATTR(drive, S_IWUGO | S_IRUGO, pod_get_drive, pod_set_drive);
-static DEVICE_ATTR(bass, S_IWUGO | S_IRUGO, pod_get_bass, pod_set_bass);
-static DEVICE_ATTR(mid, S_IWUGO | S_IRUGO, pod_get_mid, pod_set_mid);
-static DEVICE_ATTR(lowmid, S_IWUGO | S_IRUGO, pod_get_lowmid, pod_set_lowmid);
-static DEVICE_ATTR(treble, S_IWUGO | S_IRUGO, pod_get_treble, pod_set_treble);
-static DEVICE_ATTR(highmid, S_IWUGO | S_IRUGO, pod_get_highmid,
+static DEVICE_ATTR(drive, S_IWUSR | S_IRUGO, pod_get_drive, pod_set_drive);
+static DEVICE_ATTR(bass, S_IWUSR | S_IRUGO, pod_get_bass, pod_set_bass);
+static DEVICE_ATTR(mid, S_IWUSR | S_IRUGO, pod_get_mid, pod_set_mid);
+static DEVICE_ATTR(lowmid, S_IWUSR | S_IRUGO, pod_get_lowmid, pod_set_lowmid);
+static DEVICE_ATTR(treble, S_IWUSR | S_IRUGO, pod_get_treble, pod_set_treble);
+static DEVICE_ATTR(highmid, S_IWUSR | S_IRUGO, pod_get_highmid,
pod_set_highmid);
-static DEVICE_ATTR(chan_vol, S_IWUGO | S_IRUGO, pod_get_chan_vol,
+static DEVICE_ATTR(chan_vol, S_IWUSR | S_IRUGO, pod_get_chan_vol,
pod_set_chan_vol);
-static DEVICE_ATTR(reverb_mix, S_IWUGO | S_IRUGO, pod_get_reverb_mix,
+static DEVICE_ATTR(reverb_mix, S_IWUSR | S_IRUGO, pod_get_reverb_mix,
pod_set_reverb_mix);
-static DEVICE_ATTR(effect_setup, S_IWUGO | S_IRUGO, pod_get_effect_setup,
+static DEVICE_ATTR(effect_setup, S_IWUSR | S_IRUGO, pod_get_effect_setup,
pod_set_effect_setup);
-static DEVICE_ATTR(band_1_frequency, S_IWUGO | S_IRUGO,
+static DEVICE_ATTR(band_1_frequency, S_IWUSR | S_IRUGO,
pod_get_band_1_frequency, pod_set_band_1_frequency);
-static DEVICE_ATTR(presence, S_IWUGO | S_IRUGO, pod_get_presence,
+static DEVICE_ATTR(presence, S_IWUSR | S_IRUGO, pod_get_presence,
pod_set_presence);
-static DEVICE_ATTR2(treble__bass, treble, S_IWUGO | S_IRUGO,
+static DEVICE_ATTR2(treble__bass, treble, S_IWUSR | S_IRUGO,
pod_get_treble__bass, pod_set_treble__bass);
-static DEVICE_ATTR(noise_gate_enable, S_IWUGO | S_IRUGO,
+static DEVICE_ATTR(noise_gate_enable, S_IWUSR | S_IRUGO,
pod_get_noise_gate_enable, pod_set_noise_gate_enable);
-static DEVICE_ATTR(gate_threshold, S_IWUGO | S_IRUGO, pod_get_gate_threshold,
+static DEVICE_ATTR(gate_threshold, S_IWUSR | S_IRUGO, pod_get_gate_threshold,
pod_set_gate_threshold);
-static DEVICE_ATTR(gate_decay_time, S_IWUGO | S_IRUGO, pod_get_gate_decay_time,
+static DEVICE_ATTR(gate_decay_time, S_IWUSR | S_IRUGO, pod_get_gate_decay_time,
pod_set_gate_decay_time);
-static DEVICE_ATTR(stomp_enable, S_IWUGO | S_IRUGO, pod_get_stomp_enable,
+static DEVICE_ATTR(stomp_enable, S_IWUSR | S_IRUGO, pod_get_stomp_enable,
pod_set_stomp_enable);
-static DEVICE_ATTR(comp_enable, S_IWUGO | S_IRUGO, pod_get_comp_enable,
+static DEVICE_ATTR(comp_enable, S_IWUSR | S_IRUGO, pod_get_comp_enable,
pod_set_comp_enable);
-static DEVICE_ATTR(stomp_time, S_IWUGO | S_IRUGO, pod_get_stomp_time,
+static DEVICE_ATTR(stomp_time, S_IWUSR | S_IRUGO, pod_get_stomp_time,
pod_set_stomp_time);
-static DEVICE_ATTR(delay_enable, S_IWUGO | S_IRUGO, pod_get_delay_enable,
+static DEVICE_ATTR(delay_enable, S_IWUSR | S_IRUGO, pod_get_delay_enable,
pod_set_delay_enable);
-static DEVICE_ATTR(mod_param_1, S_IWUGO | S_IRUGO, pod_get_mod_param_1,
+static DEVICE_ATTR(mod_param_1, S_IWUSR | S_IRUGO, pod_get_mod_param_1,
pod_set_mod_param_1);
-static DEVICE_ATTR(delay_param_1, S_IWUGO | S_IRUGO, pod_get_delay_param_1,
+static DEVICE_ATTR(delay_param_1, S_IWUSR | S_IRUGO, pod_get_delay_param_1,
pod_set_delay_param_1);
-static DEVICE_ATTR(delay_param_1_note_value, S_IWUGO | S_IRUGO,
+static DEVICE_ATTR(delay_param_1_note_value, S_IWUSR | S_IRUGO,
pod_get_delay_param_1_note_value,
pod_set_delay_param_1_note_value);
-static DEVICE_ATTR2(band_2_frequency__bass, band_2_frequency, S_IWUGO | S_IRUGO,
+static DEVICE_ATTR2(band_2_frequency__bass, band_2_frequency, S_IWUSR | S_IRUGO,
pod_get_band_2_frequency__bass,
pod_set_band_2_frequency__bass);
-static DEVICE_ATTR(delay_param_2, S_IWUGO | S_IRUGO, pod_get_delay_param_2,
+static DEVICE_ATTR(delay_param_2, S_IWUSR | S_IRUGO, pod_get_delay_param_2,
pod_set_delay_param_2);
-static DEVICE_ATTR(delay_volume_mix, S_IWUGO | S_IRUGO,
+static DEVICE_ATTR(delay_volume_mix, S_IWUSR | S_IRUGO,
pod_get_delay_volume_mix, pod_set_delay_volume_mix);
-static DEVICE_ATTR(delay_param_3, S_IWUGO | S_IRUGO, pod_get_delay_param_3,
+static DEVICE_ATTR(delay_param_3, S_IWUSR | S_IRUGO, pod_get_delay_param_3,
pod_set_delay_param_3);
-static DEVICE_ATTR(reverb_enable, S_IWUGO | S_IRUGO, pod_get_reverb_enable,
+static DEVICE_ATTR(reverb_enable, S_IWUSR | S_IRUGO, pod_get_reverb_enable,
pod_set_reverb_enable);
-static DEVICE_ATTR(reverb_type, S_IWUGO | S_IRUGO, pod_get_reverb_type,
+static DEVICE_ATTR(reverb_type, S_IWUSR | S_IRUGO, pod_get_reverb_type,
pod_set_reverb_type);
-static DEVICE_ATTR(reverb_decay, S_IWUGO | S_IRUGO, pod_get_reverb_decay,
+static DEVICE_ATTR(reverb_decay, S_IWUSR | S_IRUGO, pod_get_reverb_decay,
pod_set_reverb_decay);
-static DEVICE_ATTR(reverb_tone, S_IWUGO | S_IRUGO, pod_get_reverb_tone,
+static DEVICE_ATTR(reverb_tone, S_IWUSR | S_IRUGO, pod_get_reverb_tone,
pod_set_reverb_tone);
-static DEVICE_ATTR(reverb_pre_delay, S_IWUGO | S_IRUGO,
+static DEVICE_ATTR(reverb_pre_delay, S_IWUSR | S_IRUGO,
pod_get_reverb_pre_delay, pod_set_reverb_pre_delay);
-static DEVICE_ATTR(reverb_pre_post, S_IWUGO | S_IRUGO, pod_get_reverb_pre_post,
+static DEVICE_ATTR(reverb_pre_post, S_IWUSR | S_IRUGO, pod_get_reverb_pre_post,
pod_set_reverb_pre_post);
-static DEVICE_ATTR(band_2_frequency, S_IWUGO | S_IRUGO,
+static DEVICE_ATTR(band_2_frequency, S_IWUSR | S_IRUGO,
pod_get_band_2_frequency, pod_set_band_2_frequency);
-static DEVICE_ATTR2(band_3_frequency__bass, band_3_frequency, S_IWUGO | S_IRUGO,
+static DEVICE_ATTR2(band_3_frequency__bass, band_3_frequency, S_IWUSR | S_IRUGO,
pod_get_band_3_frequency__bass,
pod_set_band_3_frequency__bass);
-static DEVICE_ATTR(wah_enable, S_IWUGO | S_IRUGO, pod_get_wah_enable,
+static DEVICE_ATTR(wah_enable, S_IWUSR | S_IRUGO, pod_get_wah_enable,
pod_set_wah_enable);
-static DEVICE_ATTR(modulation_lo_cut, S_IWUGO | S_IRUGO,
+static DEVICE_ATTR(modulation_lo_cut, S_IWUSR | S_IRUGO,
pod_get_modulation_lo_cut, pod_set_modulation_lo_cut);
-static DEVICE_ATTR(delay_reverb_lo_cut, S_IWUGO | S_IRUGO,
+static DEVICE_ATTR(delay_reverb_lo_cut, S_IWUSR | S_IRUGO,
pod_get_delay_reverb_lo_cut, pod_set_delay_reverb_lo_cut);
-static DEVICE_ATTR(volume_pedal_minimum, S_IWUGO | S_IRUGO,
+static DEVICE_ATTR(volume_pedal_minimum, S_IWUSR | S_IRUGO,
pod_get_volume_pedal_minimum, pod_set_volume_pedal_minimum);
-static DEVICE_ATTR(eq_pre_post, S_IWUGO | S_IRUGO, pod_get_eq_pre_post,
+static DEVICE_ATTR(eq_pre_post, S_IWUSR | S_IRUGO, pod_get_eq_pre_post,
pod_set_eq_pre_post);
-static DEVICE_ATTR(volume_pre_post, S_IWUGO | S_IRUGO, pod_get_volume_pre_post,
+static DEVICE_ATTR(volume_pre_post, S_IWUSR | S_IRUGO, pod_get_volume_pre_post,
pod_set_volume_pre_post);
-static DEVICE_ATTR(di_model, S_IWUGO | S_IRUGO, pod_get_di_model,
+static DEVICE_ATTR(di_model, S_IWUSR | S_IRUGO, pod_get_di_model,
pod_set_di_model);
-static DEVICE_ATTR(di_delay, S_IWUGO | S_IRUGO, pod_get_di_delay,
+static DEVICE_ATTR(di_delay, S_IWUSR | S_IRUGO, pod_get_di_delay,
pod_set_di_delay);
-static DEVICE_ATTR(mod_enable, S_IWUGO | S_IRUGO, pod_get_mod_enable,
+static DEVICE_ATTR(mod_enable, S_IWUSR | S_IRUGO, pod_get_mod_enable,
pod_set_mod_enable);
-static DEVICE_ATTR(mod_param_1_note_value, S_IWUGO | S_IRUGO,
+static DEVICE_ATTR(mod_param_1_note_value, S_IWUSR | S_IRUGO,
pod_get_mod_param_1_note_value,
pod_set_mod_param_1_note_value);
-static DEVICE_ATTR(mod_param_2, S_IWUGO | S_IRUGO, pod_get_mod_param_2,
+static DEVICE_ATTR(mod_param_2, S_IWUSR | S_IRUGO, pod_get_mod_param_2,
pod_set_mod_param_2);
-static DEVICE_ATTR(mod_param_3, S_IWUGO | S_IRUGO, pod_get_mod_param_3,
+static DEVICE_ATTR(mod_param_3, S_IWUSR | S_IRUGO, pod_get_mod_param_3,
pod_set_mod_param_3);
-static DEVICE_ATTR(mod_param_4, S_IWUGO | S_IRUGO, pod_get_mod_param_4,
+static DEVICE_ATTR(mod_param_4, S_IWUSR | S_IRUGO, pod_get_mod_param_4,
pod_set_mod_param_4);
-static DEVICE_ATTR(mod_param_5, S_IWUGO | S_IRUGO, pod_get_mod_param_5,
+static DEVICE_ATTR(mod_param_5, S_IWUSR | S_IRUGO, pod_get_mod_param_5,
pod_set_mod_param_5);
-static DEVICE_ATTR(mod_volume_mix, S_IWUGO | S_IRUGO, pod_get_mod_volume_mix,
+static DEVICE_ATTR(mod_volume_mix, S_IWUSR | S_IRUGO, pod_get_mod_volume_mix,
pod_set_mod_volume_mix);
-static DEVICE_ATTR(mod_pre_post, S_IWUGO | S_IRUGO, pod_get_mod_pre_post,
+static DEVICE_ATTR(mod_pre_post, S_IWUSR | S_IRUGO, pod_get_mod_pre_post,
pod_set_mod_pre_post);
-static DEVICE_ATTR(modulation_model, S_IWUGO | S_IRUGO,
+static DEVICE_ATTR(modulation_model, S_IWUSR | S_IRUGO,
pod_get_modulation_model, pod_set_modulation_model);
-static DEVICE_ATTR(band_3_frequency, S_IWUGO | S_IRUGO,
+static DEVICE_ATTR(band_3_frequency, S_IWUSR | S_IRUGO,
pod_get_band_3_frequency, pod_set_band_3_frequency);
-static DEVICE_ATTR2(band_4_frequency__bass, band_4_frequency, S_IWUGO | S_IRUGO,
+static DEVICE_ATTR2(band_4_frequency__bass, band_4_frequency, S_IWUSR | S_IRUGO,
pod_get_band_4_frequency__bass,
pod_set_band_4_frequency__bass);
-static DEVICE_ATTR(mod_param_1_double_precision, S_IWUGO | S_IRUGO,
+static DEVICE_ATTR(mod_param_1_double_precision, S_IWUSR | S_IRUGO,
pod_get_mod_param_1_double_precision,
pod_set_mod_param_1_double_precision);
-static DEVICE_ATTR(delay_param_1_double_precision, S_IWUGO | S_IRUGO,
+static DEVICE_ATTR(delay_param_1_double_precision, S_IWUSR | S_IRUGO,
pod_get_delay_param_1_double_precision,
pod_set_delay_param_1_double_precision);
-static DEVICE_ATTR(eq_enable, S_IWUGO | S_IRUGO, pod_get_eq_enable,
+static DEVICE_ATTR(eq_enable, S_IWUSR | S_IRUGO, pod_get_eq_enable,
pod_set_eq_enable);
-static DEVICE_ATTR(tap, S_IWUGO | S_IRUGO, pod_get_tap, pod_set_tap);
-static DEVICE_ATTR(volume_tweak_pedal_assign, S_IWUGO | S_IRUGO,
+static DEVICE_ATTR(tap, S_IWUSR | S_IRUGO, pod_get_tap, pod_set_tap);
+static DEVICE_ATTR(volume_tweak_pedal_assign, S_IWUSR | S_IRUGO,
pod_get_volume_tweak_pedal_assign,
pod_set_volume_tweak_pedal_assign);
-static DEVICE_ATTR(band_5_frequency, S_IWUGO | S_IRUGO,
+static DEVICE_ATTR(band_5_frequency, S_IWUSR | S_IRUGO,
pod_get_band_5_frequency, pod_set_band_5_frequency);
-static DEVICE_ATTR(tuner, S_IWUGO | S_IRUGO, pod_get_tuner, pod_set_tuner);
-static DEVICE_ATTR(mic_selection, S_IWUGO | S_IRUGO, pod_get_mic_selection,
+static DEVICE_ATTR(tuner, S_IWUSR | S_IRUGO, pod_get_tuner, pod_set_tuner);
+static DEVICE_ATTR(mic_selection, S_IWUSR | S_IRUGO, pod_get_mic_selection,
pod_set_mic_selection);
-static DEVICE_ATTR(cabinet_model, S_IWUGO | S_IRUGO, pod_get_cabinet_model,
+static DEVICE_ATTR(cabinet_model, S_IWUSR | S_IRUGO, pod_get_cabinet_model,
pod_set_cabinet_model);
-static DEVICE_ATTR(stomp_model, S_IWUGO | S_IRUGO, pod_get_stomp_model,
+static DEVICE_ATTR(stomp_model, S_IWUSR | S_IRUGO, pod_get_stomp_model,
pod_set_stomp_model);
-static DEVICE_ATTR(roomlevel, S_IWUGO | S_IRUGO, pod_get_roomlevel,
+static DEVICE_ATTR(roomlevel, S_IWUSR | S_IRUGO, pod_get_roomlevel,
pod_set_roomlevel);
-static DEVICE_ATTR(band_4_frequency, S_IWUGO | S_IRUGO,
+static DEVICE_ATTR(band_4_frequency, S_IWUSR | S_IRUGO,
pod_get_band_4_frequency, pod_set_band_4_frequency);
-static DEVICE_ATTR(band_6_frequency, S_IWUGO | S_IRUGO,
+static DEVICE_ATTR(band_6_frequency, S_IWUSR | S_IRUGO,
pod_get_band_6_frequency, pod_set_band_6_frequency);
-static DEVICE_ATTR(stomp_param_1_note_value, S_IWUGO | S_IRUGO,
+static DEVICE_ATTR(stomp_param_1_note_value, S_IWUSR | S_IRUGO,
pod_get_stomp_param_1_note_value,
pod_set_stomp_param_1_note_value);
-static DEVICE_ATTR(stomp_param_2, S_IWUGO | S_IRUGO, pod_get_stomp_param_2,
+static DEVICE_ATTR(stomp_param_2, S_IWUSR | S_IRUGO, pod_get_stomp_param_2,
pod_set_stomp_param_2);
-static DEVICE_ATTR(stomp_param_3, S_IWUGO | S_IRUGO, pod_get_stomp_param_3,
+static DEVICE_ATTR(stomp_param_3, S_IWUSR | S_IRUGO, pod_get_stomp_param_3,
pod_set_stomp_param_3);
-static DEVICE_ATTR(stomp_param_4, S_IWUGO | S_IRUGO, pod_get_stomp_param_4,
+static DEVICE_ATTR(stomp_param_4, S_IWUSR | S_IRUGO, pod_get_stomp_param_4,
pod_set_stomp_param_4);
-static DEVICE_ATTR(stomp_param_5, S_IWUGO | S_IRUGO, pod_get_stomp_param_5,
+static DEVICE_ATTR(stomp_param_5, S_IWUSR | S_IRUGO, pod_get_stomp_param_5,
pod_set_stomp_param_5);
-static DEVICE_ATTR(stomp_param_6, S_IWUGO | S_IRUGO, pod_get_stomp_param_6,
+static DEVICE_ATTR(stomp_param_6, S_IWUSR | S_IRUGO, pod_get_stomp_param_6,
pod_set_stomp_param_6);
-static DEVICE_ATTR(amp_switch_select, S_IWUGO | S_IRUGO,
+static DEVICE_ATTR(amp_switch_select, S_IWUSR | S_IRUGO,
pod_get_amp_switch_select, pod_set_amp_switch_select);
-static DEVICE_ATTR(delay_param_4, S_IWUGO | S_IRUGO, pod_get_delay_param_4,
+static DEVICE_ATTR(delay_param_4, S_IWUSR | S_IRUGO, pod_get_delay_param_4,
pod_set_delay_param_4);
-static DEVICE_ATTR(delay_param_5, S_IWUGO | S_IRUGO, pod_get_delay_param_5,
+static DEVICE_ATTR(delay_param_5, S_IWUSR | S_IRUGO, pod_get_delay_param_5,
pod_set_delay_param_5);
-static DEVICE_ATTR(delay_pre_post, S_IWUGO | S_IRUGO, pod_get_delay_pre_post,
+static DEVICE_ATTR(delay_pre_post, S_IWUSR | S_IRUGO, pod_get_delay_pre_post,
pod_set_delay_pre_post);
-static DEVICE_ATTR(delay_model, S_IWUGO | S_IRUGO, pod_get_delay_model,
+static DEVICE_ATTR(delay_model, S_IWUSR | S_IRUGO, pod_get_delay_model,
pod_set_delay_model);
-static DEVICE_ATTR(delay_verb_model, S_IWUGO | S_IRUGO,
+static DEVICE_ATTR(delay_verb_model, S_IWUSR | S_IRUGO,
pod_get_delay_verb_model, pod_set_delay_verb_model);
-static DEVICE_ATTR(tempo_msb, S_IWUGO | S_IRUGO, pod_get_tempo_msb,
+static DEVICE_ATTR(tempo_msb, S_IWUSR | S_IRUGO, pod_get_tempo_msb,
pod_set_tempo_msb);
-static DEVICE_ATTR(tempo_lsb, S_IWUGO | S_IRUGO, pod_get_tempo_lsb,
+static DEVICE_ATTR(tempo_lsb, S_IWUSR | S_IRUGO, pod_get_tempo_lsb,
pod_set_tempo_lsb);
-static DEVICE_ATTR(wah_model, S_IWUGO | S_IRUGO, pod_get_wah_model,
+static DEVICE_ATTR(wah_model, S_IWUSR | S_IRUGO, pod_get_wah_model,
pod_set_wah_model);
-static DEVICE_ATTR(bypass_volume, S_IWUGO | S_IRUGO, pod_get_bypass_volume,
+static DEVICE_ATTR(bypass_volume, S_IWUSR | S_IRUGO, pod_get_bypass_volume,
pod_set_bypass_volume);
-static DEVICE_ATTR(fx_loop_on_off, S_IWUGO | S_IRUGO, pod_get_fx_loop_on_off,
+static DEVICE_ATTR(fx_loop_on_off, S_IWUSR | S_IRUGO, pod_get_fx_loop_on_off,
pod_set_fx_loop_on_off);
-static DEVICE_ATTR(tweak_param_select, S_IWUGO | S_IRUGO,
+static DEVICE_ATTR(tweak_param_select, S_IWUSR | S_IRUGO,
pod_get_tweak_param_select, pod_set_tweak_param_select);
-static DEVICE_ATTR(amp1_engage, S_IWUGO | S_IRUGO, pod_get_amp1_engage,
+static DEVICE_ATTR(amp1_engage, S_IWUSR | S_IRUGO, pod_get_amp1_engage,
pod_set_amp1_engage);
-static DEVICE_ATTR(band_1_gain, S_IWUGO | S_IRUGO, pod_get_band_1_gain,
+static DEVICE_ATTR(band_1_gain, S_IWUSR | S_IRUGO, pod_get_band_1_gain,
pod_set_band_1_gain);
-static DEVICE_ATTR2(band_2_gain__bass, band_2_gain, S_IWUGO | S_IRUGO,
+static DEVICE_ATTR2(band_2_gain__bass, band_2_gain, S_IWUSR | S_IRUGO,
pod_get_band_2_gain__bass, pod_set_band_2_gain__bass);
-static DEVICE_ATTR(band_2_gain, S_IWUGO | S_IRUGO, pod_get_band_2_gain,
+static DEVICE_ATTR(band_2_gain, S_IWUSR | S_IRUGO, pod_get_band_2_gain,
pod_set_band_2_gain);
-static DEVICE_ATTR2(band_3_gain__bass, band_3_gain, S_IWUGO | S_IRUGO,
+static DEVICE_ATTR2(band_3_gain__bass, band_3_gain, S_IWUSR | S_IRUGO,
pod_get_band_3_gain__bass, pod_set_band_3_gain__bass);
-static DEVICE_ATTR(band_3_gain, S_IWUGO | S_IRUGO, pod_get_band_3_gain,
+static DEVICE_ATTR(band_3_gain, S_IWUSR | S_IRUGO, pod_get_band_3_gain,
pod_set_band_3_gain);
-static DEVICE_ATTR2(band_4_gain__bass, band_4_gain, S_IWUGO | S_IRUGO,
+static DEVICE_ATTR2(band_4_gain__bass, band_4_gain, S_IWUSR | S_IRUGO,
pod_get_band_4_gain__bass, pod_set_band_4_gain__bass);
-static DEVICE_ATTR2(band_5_gain__bass, band_5_gain, S_IWUGO | S_IRUGO,
+static DEVICE_ATTR2(band_5_gain__bass, band_5_gain, S_IWUSR | S_IRUGO,
pod_get_band_5_gain__bass, pod_set_band_5_gain__bass);
-static DEVICE_ATTR(band_4_gain, S_IWUGO | S_IRUGO, pod_get_band_4_gain,
+static DEVICE_ATTR(band_4_gain, S_IWUSR | S_IRUGO, pod_get_band_4_gain,
pod_set_band_4_gain);
-static DEVICE_ATTR2(band_6_gain__bass, band_6_gain, S_IWUGO | S_IRUGO,
+static DEVICE_ATTR2(band_6_gain__bass, band_6_gain, S_IWUSR | S_IRUGO,
pod_get_band_6_gain__bass, pod_set_band_6_gain__bass);
static DEVICE_ATTR(body, S_IRUGO, variax_get_body, line6_nop_write);
static DEVICE_ATTR(pickup1_enable, S_IRUGO, variax_get_pickup1_enable,
diff --git a/drivers/staging/line6/midi.c b/drivers/staging/line6/midi.c
index 4304dfe6c166..ab67e889d2c4 100644
--- a/drivers/staging/line6/midi.c
+++ b/drivers/staging/line6/midi.c
@@ -350,9 +350,9 @@ static ssize_t midi_set_midi_mask_receive(struct device *dev,
return count;
}
-static DEVICE_ATTR(midi_mask_transmit, S_IWUGO | S_IRUGO,
+static DEVICE_ATTR(midi_mask_transmit, S_IWUSR | S_IRUGO,
midi_get_midi_mask_transmit, midi_set_midi_mask_transmit);
-static DEVICE_ATTR(midi_mask_receive, S_IWUGO | S_IRUGO,
+static DEVICE_ATTR(midi_mask_receive, S_IWUSR | S_IRUGO,
midi_get_midi_mask_receive, midi_set_midi_mask_receive);
/* MIDI device destructor */
diff --git a/drivers/staging/line6/pcm.c b/drivers/staging/line6/pcm.c
index e54770e34d2e..b9c55f9eb501 100644
--- a/drivers/staging/line6/pcm.c
+++ b/drivers/staging/line6/pcm.c
@@ -79,9 +79,9 @@ static ssize_t pcm_set_impulse_period(struct device *dev,
return count;
}
-static DEVICE_ATTR(impulse_volume, S_IWUGO | S_IRUGO, pcm_get_impulse_volume,
+static DEVICE_ATTR(impulse_volume, S_IWUSR | S_IRUGO, pcm_get_impulse_volume,
pcm_set_impulse_volume);
-static DEVICE_ATTR(impulse_period, S_IWUGO | S_IRUGO, pcm_get_impulse_period,
+static DEVICE_ATTR(impulse_period, S_IWUSR | S_IRUGO, pcm_get_impulse_period,
pcm_set_impulse_period);
#endif
diff --git a/drivers/staging/line6/pod.c b/drivers/staging/line6/pod.c
index 22e2cedcacf7..d9b30212585c 100644
--- a/drivers/staging/line6/pod.c
+++ b/drivers/staging/line6/pod.c
@@ -1051,48 +1051,48 @@ POD_GET_SYSTEM_PARAM(tuner_pitch, 1);
#undef GET_SYSTEM_PARAM
/* POD special files: */
-static DEVICE_ATTR(channel, S_IWUGO | S_IRUGO, pod_get_channel,
+static DEVICE_ATTR(channel, S_IWUSR | S_IRUGO, pod_get_channel,
pod_set_channel);
static DEVICE_ATTR(clip, S_IRUGO, pod_wait_for_clip, line6_nop_write);
static DEVICE_ATTR(device_id, S_IRUGO, pod_get_device_id, line6_nop_write);
static DEVICE_ATTR(dirty, S_IRUGO, pod_get_dirty, line6_nop_write);
-static DEVICE_ATTR(dump, S_IWUGO | S_IRUGO, pod_get_dump, pod_set_dump);
-static DEVICE_ATTR(dump_buf, S_IWUGO | S_IRUGO, pod_get_dump_buf,
+static DEVICE_ATTR(dump, S_IWUSR | S_IRUGO, pod_get_dump, pod_set_dump);
+static DEVICE_ATTR(dump_buf, S_IWUSR | S_IRUGO, pod_get_dump_buf,
pod_set_dump_buf);
-static DEVICE_ATTR(finish, S_IWUGO, line6_nop_read, pod_set_finish);
+static DEVICE_ATTR(finish, S_IWUSR, line6_nop_read, pod_set_finish);
static DEVICE_ATTR(firmware_version, S_IRUGO, pod_get_firmware_version,
line6_nop_write);
-static DEVICE_ATTR(midi_postprocess, S_IWUGO | S_IRUGO,
+static DEVICE_ATTR(midi_postprocess, S_IWUSR | S_IRUGO,
pod_get_midi_postprocess, pod_set_midi_postprocess);
-static DEVICE_ATTR(monitor_level, S_IWUGO | S_IRUGO, pod_get_monitor_level,
+static DEVICE_ATTR(monitor_level, S_IWUSR | S_IRUGO, pod_get_monitor_level,
pod_set_monitor_level);
static DEVICE_ATTR(name, S_IRUGO, pod_get_name, line6_nop_write);
static DEVICE_ATTR(name_buf, S_IRUGO, pod_get_name_buf, line6_nop_write);
-static DEVICE_ATTR(retrieve_amp_setup, S_IWUGO, line6_nop_read,
+static DEVICE_ATTR(retrieve_amp_setup, S_IWUSR, line6_nop_read,
pod_set_retrieve_amp_setup);
-static DEVICE_ATTR(retrieve_channel, S_IWUGO, line6_nop_read,
+static DEVICE_ATTR(retrieve_channel, S_IWUSR, line6_nop_read,
pod_set_retrieve_channel);
-static DEVICE_ATTR(retrieve_effects_setup, S_IWUGO, line6_nop_read,
+static DEVICE_ATTR(retrieve_effects_setup, S_IWUSR, line6_nop_read,
pod_set_retrieve_effects_setup);
-static DEVICE_ATTR(routing, S_IWUGO | S_IRUGO, pod_get_routing,
+static DEVICE_ATTR(routing, S_IWUSR | S_IRUGO, pod_get_routing,
pod_set_routing);
static DEVICE_ATTR(serial_number, S_IRUGO, pod_get_serial_number,
line6_nop_write);
-static DEVICE_ATTR(store_amp_setup, S_IWUGO, line6_nop_read,
+static DEVICE_ATTR(store_amp_setup, S_IWUSR, line6_nop_read,
pod_set_store_amp_setup);
-static DEVICE_ATTR(store_channel, S_IWUGO, line6_nop_read,
+static DEVICE_ATTR(store_channel, S_IWUSR, line6_nop_read,
pod_set_store_channel);
-static DEVICE_ATTR(store_effects_setup, S_IWUGO, line6_nop_read,
+static DEVICE_ATTR(store_effects_setup, S_IWUSR, line6_nop_read,
pod_set_store_effects_setup);
-static DEVICE_ATTR(tuner_freq, S_IWUGO | S_IRUGO, pod_get_tuner_freq,
+static DEVICE_ATTR(tuner_freq, S_IWUSR | S_IRUGO, pod_get_tuner_freq,
pod_set_tuner_freq);
-static DEVICE_ATTR(tuner_mute, S_IWUGO | S_IRUGO, pod_get_tuner_mute,
+static DEVICE_ATTR(tuner_mute, S_IWUSR | S_IRUGO, pod_get_tuner_mute,
pod_set_tuner_mute);
static DEVICE_ATTR(tuner_note, S_IRUGO, pod_get_tuner_note, line6_nop_write);
static DEVICE_ATTR(tuner_pitch, S_IRUGO, pod_get_tuner_pitch, line6_nop_write);
#ifdef CONFIG_LINE6_USB_RAW
-static DEVICE_ATTR(raw, S_IWUGO, line6_nop_read, line6_set_raw);
+static DEVICE_ATTR(raw, S_IWUSR, line6_nop_read, line6_set_raw);
#endif
/* control info callback */
diff --git a/drivers/staging/line6/toneport.c b/drivers/staging/line6/toneport.c
index 6a10b0f9749a..879e6992bbc6 100644
--- a/drivers/staging/line6/toneport.c
+++ b/drivers/staging/line6/toneport.c
@@ -154,9 +154,9 @@ static ssize_t toneport_set_led_green(struct device *dev,
return count;
}
-static DEVICE_ATTR(led_red, S_IWUGO | S_IRUGO, line6_nop_read,
+static DEVICE_ATTR(led_red, S_IWUSR | S_IRUGO, line6_nop_read,
toneport_set_led_red);
-static DEVICE_ATTR(led_green, S_IWUGO | S_IRUGO, line6_nop_read,
+static DEVICE_ATTR(led_green, S_IWUSR | S_IRUGO, line6_nop_read,
toneport_set_led_green);
static int toneport_send_cmd(struct usb_device *usbdev, int cmd1, int cmd2)
diff --git a/drivers/staging/line6/variax.c b/drivers/staging/line6/variax.c
index 894eee7f2317..81241cdf1be9 100644
--- a/drivers/staging/line6/variax.c
+++ b/drivers/staging/line6/variax.c
@@ -549,21 +549,21 @@ static ssize_t variax_set_raw2(struct device *dev,
#endif
/* Variax workbench special files: */
-static DEVICE_ATTR(model, S_IWUGO | S_IRUGO, variax_get_model,
+static DEVICE_ATTR(model, S_IWUSR | S_IRUGO, variax_get_model,
variax_set_model);
-static DEVICE_ATTR(volume, S_IWUGO | S_IRUGO, variax_get_volume,
+static DEVICE_ATTR(volume, S_IWUSR | S_IRUGO, variax_get_volume,
variax_set_volume);
-static DEVICE_ATTR(tone, S_IWUGO | S_IRUGO, variax_get_tone, variax_set_tone);
+static DEVICE_ATTR(tone, S_IWUSR | S_IRUGO, variax_get_tone, variax_set_tone);
static DEVICE_ATTR(name, S_IRUGO, variax_get_name, line6_nop_write);
static DEVICE_ATTR(bank, S_IRUGO, variax_get_bank, line6_nop_write);
static DEVICE_ATTR(dump, S_IRUGO, variax_get_dump, line6_nop_write);
-static DEVICE_ATTR(active, S_IWUGO | S_IRUGO, variax_get_active,
+static DEVICE_ATTR(active, S_IWUSR | S_IRUGO, variax_get_active,
variax_set_active);
static DEVICE_ATTR(guitar, S_IRUGO, variax_get_guitar, line6_nop_write);
#ifdef CONFIG_LINE6_USB_RAW
-static DEVICE_ATTR(raw, S_IWUGO, line6_nop_read, line6_set_raw);
-static DEVICE_ATTR(raw2, S_IWUGO, line6_nop_read, variax_set_raw2);
+static DEVICE_ATTR(raw, S_IWUSR, line6_nop_read, line6_set_raw);
+static DEVICE_ATTR(raw2, S_IWUSR, line6_nop_read, variax_set_raw2);
#endif
/*
diff --git a/drivers/staging/quickstart/quickstart.c b/drivers/staging/quickstart/quickstart.c
index d746715d3d89..d83bec876d2e 100644
--- a/drivers/staging/quickstart/quickstart.c
+++ b/drivers/staging/quickstart/quickstart.c
@@ -355,7 +355,6 @@ static int quickstart_acpi_remove(struct acpi_device *device, int type)
static void quickstart_exit(void)
{
input_unregister_device(quickstart_input);
- input_free_device(quickstart_input);
device_remove_file(&pf_device->dev, &dev_attr_pressed_button);
device_remove_file(&pf_device->dev, &dev_attr_buttons);
@@ -375,6 +374,7 @@ static int __init quickstart_init_input(void)
{
struct quickstart_btn **ptr = &quickstart_data.btn_lst;
int count;
+ int ret;
quickstart_input = input_allocate_device();
@@ -391,7 +391,13 @@ static int __init quickstart_init_input(void)
ptr = &((*ptr)->next);
}
- return input_register_device(quickstart_input);
+ ret = input_register_device(quickstart_input);
+ if (ret) {
+ input_free_device(quickstart_input);
+ return ret;
+ }
+
+ return 0;
}
static int __init quickstart_init(void)
diff --git a/drivers/staging/rt2860/usb_main_dev.c b/drivers/staging/rt2860/usb_main_dev.c
index ddacfc6c4861..cd15daae5412 100644
--- a/drivers/staging/rt2860/usb_main_dev.c
+++ b/drivers/staging/rt2860/usb_main_dev.c
@@ -182,6 +182,7 @@ struct usb_device_id rtusb_usb_id[] = {
{USB_DEVICE(0x2001, 0x3C09)}, /* D-Link */
{USB_DEVICE(0x2001, 0x3C0A)}, /* D-Link 3072 */
{USB_DEVICE(0x2019, 0xED14)}, /* Planex Communications, Inc. */
+ {USB_DEVICE(0x0411, 0x015D)}, /* Buffalo Airstation WLI-UC-GN */
{} /* Terminating entry */
};
diff --git a/drivers/staging/rtl8187se/r8185b_init.c b/drivers/staging/rtl8187se/r8185b_init.c
index 46000d72f4c4..3bdf9b31cc4e 100644
--- a/drivers/staging/rtl8187se/r8185b_init.c
+++ b/drivers/staging/rtl8187se/r8185b_init.c
@@ -264,8 +264,12 @@ HwHSSIThreeWire(
udelay(10);
}
- if (TryCnt == TC_3W_POLL_MAX_TRY_CNT)
- panic("HwThreeWire(): CmdReg: %#X RE|WE bits are not clear!!\n", u1bTmp);
+ if (TryCnt == TC_3W_POLL_MAX_TRY_CNT) {
+ printk(KERN_ERR "rtl8187se: HwThreeWire(): CmdReg:"
+ " %#X RE|WE bits are not clear!!\n", u1bTmp);
+ dump_stack();
+ return 0;
+ }
/* RTL8187S HSSI Read/Write Function */
u1bTmp = read_nic_byte(dev, RF_SW_CONFIG);
@@ -298,13 +302,23 @@ HwHSSIThreeWire(
int idx;
int ByteCnt = nDataBufBitCnt / 8;
/* printk("%d\n",nDataBufBitCnt); */
- if ((nDataBufBitCnt % 8) != 0)
- panic("HwThreeWire(): nDataBufBitCnt(%d) should be multiple of 8!!!\n",
- nDataBufBitCnt);
+ if ((nDataBufBitCnt % 8) != 0) {
+ printk(KERN_ERR "rtl8187se: "
+ "HwThreeWire(): nDataBufBitCnt(%d)"
+ " should be multiple of 8!!!\n",
+ nDataBufBitCnt);
+ dump_stack();
+ nDataBufBitCnt += 8;
+ nDataBufBitCnt &= ~7;
+ }
- if (nDataBufBitCnt > 64)
- panic("HwThreeWire(): nDataBufBitCnt(%d) should <= 64!!!\n",
- nDataBufBitCnt);
+ if (nDataBufBitCnt > 64) {
+ printk(KERN_ERR "rtl8187se: HwThreeWire():"
+ " nDataBufBitCnt(%d) should <= 64!!!\n",
+ nDataBufBitCnt);
+ dump_stack();
+ nDataBufBitCnt = 64;
+ }
for (idx = 0; idx < ByteCnt; idx++)
write_nic_byte(dev, (SW_3W_DB0+idx), *(pDataBuf+idx));
diff --git a/drivers/staging/rtl8712/usb_halinit.c b/drivers/staging/rtl8712/usb_halinit.c
index f6569dce3012..0e9483bbabe1 100644
--- a/drivers/staging/rtl8712/usb_halinit.c
+++ b/drivers/staging/rtl8712/usb_halinit.c
@@ -37,7 +37,7 @@ u8 r8712_usb_hal_bus_init(struct _adapter *padapter)
{
u8 val8 = 0;
u8 ret = _SUCCESS;
- u8 PollingCnt = 20;
+ int PollingCnt = 20;
struct registry_priv *pregistrypriv = &padapter->registrypriv;
if (pregistrypriv->chip_version == RTL8712_FPGA) {
diff --git a/drivers/staging/samsung-laptop/samsung-laptop.c b/drivers/staging/samsung-laptop/samsung-laptop.c
index eb44b60e1eb5..ac2bf11e1119 100644
--- a/drivers/staging/samsung-laptop/samsung-laptop.c
+++ b/drivers/staging/samsung-laptop/samsung-laptop.c
@@ -356,7 +356,7 @@ static ssize_t set_silent_state(struct device *dev,
}
return count;
}
-static DEVICE_ATTR(silent, S_IWUGO | S_IRUGO,
+static DEVICE_ATTR(silent, S_IWUSR | S_IRUGO,
get_silent_state, set_silent_state);
diff --git a/drivers/staging/speakup/fakekey.c b/drivers/staging/speakup/fakekey.c
index adb93f21c0d6..65b231178f05 100644
--- a/drivers/staging/speakup/fakekey.c
+++ b/drivers/staging/speakup/fakekey.c
@@ -62,7 +62,6 @@ void speakup_remove_virtual_keyboard(void)
{
if (virt_keyboard != NULL) {
input_unregister_device(virt_keyboard);
- input_free_device(virt_keyboard);
virt_keyboard = NULL;
}
}
diff --git a/drivers/staging/spectra/ffsport.c b/drivers/staging/spectra/ffsport.c
index c7932da03c56..63a9d0adf32d 100644
--- a/drivers/staging/spectra/ffsport.c
+++ b/drivers/staging/spectra/ffsport.c
@@ -656,7 +656,7 @@ static int SBD_setup_device(struct spectra_nand_dev *dev, int which)
/* Here we force report 512 byte hardware sector size to Kernel */
blk_queue_logical_block_size(dev->queue, 512);
- blk_queue_ordered(dev->queue, QUEUE_ORDERED_DRAIN_FLUSH);
+ blk_queue_flush(dev->queue, REQ_FLUSH);
dev->thread = kthread_run(spectra_trans_thread, dev, "nand_thd");
if (IS_ERR(dev->thread)) {
diff --git a/drivers/staging/udlfb/udlfb.c b/drivers/staging/udlfb/udlfb.c
index fed25105970a..b7ac16005265 100644
--- a/drivers/staging/udlfb/udlfb.c
+++ b/drivers/staging/udlfb/udlfb.c
@@ -1441,7 +1441,7 @@ static struct device_attribute fb_device_attrs[] = {
__ATTR_RO(metrics_bytes_identical),
__ATTR_RO(metrics_bytes_sent),
__ATTR_RO(metrics_cpu_kcycles_used),
- __ATTR(metrics_reset, S_IWUGO, NULL, metrics_reset_store),
+ __ATTR(metrics_reset, S_IWUSR, NULL, metrics_reset_store),
};
/*
diff --git a/drivers/staging/winbond/sysdef.h b/drivers/staging/winbond/sysdef.h
index 9195adf98e14..d0d71f69bc8c 100644
--- a/drivers/staging/winbond/sysdef.h
+++ b/drivers/staging/winbond/sysdef.h
@@ -2,6 +2,9 @@
#ifndef SYS_DEF_H
#define SYS_DEF_H
+
+#include <linux/delay.h>
+
#define WB_LINUX
#define WB_LINUX_WPA_PSK
diff --git a/drivers/staging/zram/zram_sysfs.c b/drivers/staging/zram/zram_sysfs.c
index 6c574a994d11..6b3cf00b0ff4 100644
--- a/drivers/staging/zram/zram_sysfs.c
+++ b/drivers/staging/zram/zram_sysfs.c
@@ -189,10 +189,10 @@ static ssize_t mem_used_total_show(struct device *dev,
return sprintf(buf, "%llu\n", val);
}
-static DEVICE_ATTR(disksize, S_IRUGO | S_IWUGO,
+static DEVICE_ATTR(disksize, S_IRUGO | S_IWUSR,
disksize_show, disksize_store);
static DEVICE_ATTR(initstate, S_IRUGO, initstate_show, NULL);
-static DEVICE_ATTR(reset, S_IWUGO, NULL, reset_store);
+static DEVICE_ATTR(reset, S_IWUSR, NULL, reset_store);
static DEVICE_ATTR(num_reads, S_IRUGO, num_reads_show, NULL);
static DEVICE_ATTR(num_writes, S_IRUGO, num_writes_show, NULL);
static DEVICE_ATTR(invalid_io, S_IRUGO, invalid_io_show, NULL);
diff --git a/drivers/tty/tty_io.c b/drivers/tty/tty_io.c
index c05c5af5aa04..35480dd57a30 100644
--- a/drivers/tty/tty_io.c
+++ b/drivers/tty/tty_io.c
@@ -559,6 +559,9 @@ void __tty_hangup(struct tty_struct *tty)
tty_lock();
+ /* some functions below drop BTM, so we need this bit */
+ set_bit(TTY_HUPPING, &tty->flags);
+
/* inuse_filps is protected by the single tty lock,
this really needs to change if we want to flush the
workqueue with the lock held */
@@ -578,6 +581,10 @@ void __tty_hangup(struct tty_struct *tty)
}
spin_unlock(&tty_files_lock);
+ /*
+ * it drops BTM and thus races with reopen
+ * we protect the race by TTY_HUPPING
+ */
tty_ldisc_hangup(tty);
read_lock(&tasklist_lock);
@@ -615,7 +622,6 @@ void __tty_hangup(struct tty_struct *tty)
tty->session = NULL;
tty->pgrp = NULL;
tty->ctrl_status = 0;
- set_bit(TTY_HUPPED, &tty->flags);
spin_unlock_irqrestore(&tty->ctrl_lock, flags);
/* Account for the p->signal references we killed */
@@ -641,6 +647,7 @@ void __tty_hangup(struct tty_struct *tty)
* can't yet guarantee all that.
*/
set_bit(TTY_HUPPED, &tty->flags);
+ clear_bit(TTY_HUPPING, &tty->flags);
tty_ldisc_enable(tty);
tty_unlock();
@@ -1310,7 +1317,9 @@ static int tty_reopen(struct tty_struct *tty)
{
struct tty_driver *driver = tty->driver;
- if (test_bit(TTY_CLOSING, &tty->flags))
+ if (test_bit(TTY_CLOSING, &tty->flags) ||
+ test_bit(TTY_HUPPING, &tty->flags) ||
+ test_bit(TTY_LDISC_CHANGING, &tty->flags))
return -EIO;
if (driver->type == TTY_DRIVER_TYPE_PTY &&
diff --git a/drivers/tty/tty_ldisc.c b/drivers/tty/tty_ldisc.c
index d8e96b005023..4214d58276f7 100644
--- a/drivers/tty/tty_ldisc.c
+++ b/drivers/tty/tty_ldisc.c
@@ -454,6 +454,8 @@ static int tty_ldisc_open(struct tty_struct *tty, struct tty_ldisc *ld)
/* BTM here locks versus a hangup event */
WARN_ON(!tty_locked());
ret = ld->ops->open(tty);
+ if (ret)
+ clear_bit(TTY_LDISC_OPEN, &tty->flags);
return ret;
}
return 0;
diff --git a/drivers/uio/uio.c b/drivers/uio/uio.c
index a858d2b87b94..51fe1795d5a8 100644
--- a/drivers/uio/uio.c
+++ b/drivers/uio/uio.c
@@ -3,7 +3,7 @@
*
* Copyright(C) 2005, Benedikt Spranger <b.spranger@linutronix.de>
* Copyright(C) 2005, Thomas Gleixner <tglx@linutronix.de>
- * Copyright(C) 2006, Hans J. Koch <hjk@linutronix.de>
+ * Copyright(C) 2006, Hans J. Koch <hjk@hansjkoch.de>
* Copyright(C) 2006, Greg Kroah-Hartman <greg@kroah.com>
*
* Userspace IO
diff --git a/drivers/uio/uio_cif.c b/drivers/uio/uio_cif.c
index a8ea2f19a0cc..a84a451159ed 100644
--- a/drivers/uio/uio_cif.c
+++ b/drivers/uio/uio_cif.c
@@ -1,7 +1,7 @@
/*
* UIO Hilscher CIF card driver
*
- * (C) 2007 Hans J. Koch <hjk@linutronix.de>
+ * (C) 2007 Hans J. Koch <hjk@hansjkoch.de>
* Original code (C) 2005 Benedikt Spranger <b.spranger@linutronix.de>
*
* Licensed under GPL version 2 only.
diff --git a/drivers/uio/uio_netx.c b/drivers/uio/uio_netx.c
index 5a18e9f7b836..5ffdb483b015 100644
--- a/drivers/uio/uio_netx.c
+++ b/drivers/uio/uio_netx.c
@@ -2,7 +2,7 @@
* UIO driver for Hilscher NetX based fieldbus cards (cifX, comX).
* See http://www.hilscher.com for details.
*
- * (C) 2007 Hans J. Koch <hjk@linutronix.de>
+ * (C) 2007 Hans J. Koch <hjk@hansjkoch.de>
* (C) 2008 Manuel Traut <manut@linutronix.de>
*
* Licensed under GPL version 2 only.
diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c
index 61800f77dac8..ced846ac4141 100644
--- a/drivers/usb/core/hcd.c
+++ b/drivers/usb/core/hcd.c
@@ -1330,6 +1330,8 @@ static int map_urb_for_dma(struct usb_hcd *hcd, struct urb *urb,
*/
if (usb_endpoint_xfer_control(&urb->ep->desc)) {
+ if (hcd->self.uses_pio_for_control)
+ return ret;
if (hcd->self.uses_dma) {
urb->setup_dma = dma_map_single(
hcd->self.controller,
diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c
index 01bb72b71832..655f3c9f88bf 100644
--- a/drivers/usb/host/ehci-pci.c
+++ b/drivers/usb/host/ehci-pci.c
@@ -161,6 +161,18 @@ static int ehci_pci_setup(struct usb_hcd *hcd)
if (pdev->revision < 0xa4)
ehci->no_selective_suspend = 1;
break;
+
+ /* MCP89 chips on the MacBookAir3,1 give EPROTO when
+ * fetching device descriptors unless LPM is disabled.
+ * There are also intermittent problems enumerating
+ * devices with PPCD enabled.
+ */
+ case 0x0d9d:
+ ehci_info(ehci, "disable lpm/ppcd for nvidia mcp89");
+ ehci->has_lpm = 0;
+ ehci->has_ppcd = 0;
+ ehci->command &= ~CMD_PPCEE;
+ break;
}
break;
case PCI_VENDOR_ID_VIA:
diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c
index fef5a1f9d483..5d963e350494 100644
--- a/drivers/usb/host/xhci-hub.c
+++ b/drivers/usb/host/xhci-hub.c
@@ -229,6 +229,13 @@ void xhci_ring_device(struct xhci_hcd *xhci, int slot_id)
static void xhci_disable_port(struct xhci_hcd *xhci, u16 wIndex,
u32 __iomem *addr, u32 port_status)
{
+ /* Don't allow the USB core to disable SuperSpeed ports. */
+ if (xhci->port_array[wIndex] == 0x03) {
+ xhci_dbg(xhci, "Ignoring request to disable "
+ "SuperSpeed port.\n");
+ return;
+ }
+
/* Write 1 to disable the port */
xhci_writel(xhci, port_status | PORT_PE, addr);
port_status = xhci_readl(xhci, addr);
diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
index d178761c3981..0fae58ef8afe 100644
--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -1443,6 +1443,13 @@ void xhci_mem_cleanup(struct xhci_hcd *xhci)
xhci->dcbaa = NULL;
scratchpad_free(xhci);
+
+ xhci->num_usb2_ports = 0;
+ xhci->num_usb3_ports = 0;
+ kfree(xhci->usb2_ports);
+ kfree(xhci->usb3_ports);
+ kfree(xhci->port_array);
+
xhci->page_size = 0;
xhci->page_shift = 0;
xhci->bus_suspended = 0;
@@ -1627,6 +1634,161 @@ static void xhci_set_hc_event_deq(struct xhci_hcd *xhci)
&xhci->ir_set->erst_dequeue);
}
+static void xhci_add_in_port(struct xhci_hcd *xhci, unsigned int num_ports,
+ u32 __iomem *addr, u8 major_revision)
+{
+ u32 temp, port_offset, port_count;
+ int i;
+
+ if (major_revision > 0x03) {
+ xhci_warn(xhci, "Ignoring unknown port speed, "
+ "Ext Cap %p, revision = 0x%x\n",
+ addr, major_revision);
+ /* Ignoring port protocol we can't understand. FIXME */
+ return;
+ }
+
+ /* Port offset and count in the third dword, see section 7.2 */
+ temp = xhci_readl(xhci, addr + 2);
+ port_offset = XHCI_EXT_PORT_OFF(temp);
+ port_count = XHCI_EXT_PORT_COUNT(temp);
+ xhci_dbg(xhci, "Ext Cap %p, port offset = %u, "
+ "count = %u, revision = 0x%x\n",
+ addr, port_offset, port_count, major_revision);
+ /* Port count includes the current port offset */
+ if (port_offset == 0 || (port_offset + port_count - 1) > num_ports)
+ /* WTF? "Valid values are ‘1’ to MaxPorts" */
+ return;
+ port_offset--;
+ for (i = port_offset; i < (port_offset + port_count); i++) {
+ /* Duplicate entry. Ignore the port if the revisions differ. */
+ if (xhci->port_array[i] != 0) {
+ xhci_warn(xhci, "Duplicate port entry, Ext Cap %p,"
+ " port %u\n", addr, i);
+ xhci_warn(xhci, "Port was marked as USB %u, "
+ "duplicated as USB %u\n",
+ xhci->port_array[i], major_revision);
+ /* Only adjust the roothub port counts if we haven't
+ * found a similar duplicate.
+ */
+ if (xhci->port_array[i] != major_revision &&
+ xhci->port_array[i] != (u8) -1) {
+ if (xhci->port_array[i] == 0x03)
+ xhci->num_usb3_ports--;
+ else
+ xhci->num_usb2_ports--;
+ xhci->port_array[i] = (u8) -1;
+ }
+ /* FIXME: Should we disable the port? */
+ }
+ xhci->port_array[i] = major_revision;
+ if (major_revision == 0x03)
+ xhci->num_usb3_ports++;
+ else
+ xhci->num_usb2_ports++;
+ }
+ /* FIXME: Should we disable ports not in the Extended Capabilities? */
+}
+
+/*
+ * Scan the Extended Capabilities for the "Supported Protocol Capabilities" that
+ * specify what speeds each port is supposed to be. We can't count on the port
+ * speed bits in the PORTSC register being correct until a device is connected,
+ * but we need to set up the two fake roothubs with the correct number of USB
+ * 3.0 and USB 2.0 ports at host controller initialization time.
+ */
+static int xhci_setup_port_arrays(struct xhci_hcd *xhci, gfp_t flags)
+{
+ u32 __iomem *addr;
+ u32 offset;
+ unsigned int num_ports;
+ int i, port_index;
+
+ addr = &xhci->cap_regs->hcc_params;
+ offset = XHCI_HCC_EXT_CAPS(xhci_readl(xhci, addr));
+ if (offset == 0) {
+ xhci_err(xhci, "No Extended Capability registers, "
+ "unable to set up roothub.\n");
+ return -ENODEV;
+ }
+
+ num_ports = HCS_MAX_PORTS(xhci->hcs_params1);
+ xhci->port_array = kzalloc(sizeof(*xhci->port_array)*num_ports, flags);
+ if (!xhci->port_array)
+ return -ENOMEM;
+
+ /*
+ * For whatever reason, the first capability offset is from the
+ * capability register base, not from the HCCPARAMS register.
+ * See section 5.3.6 for offset calculation.
+ */
+ addr = &xhci->cap_regs->hc_capbase + offset;
+ while (1) {
+ u32 cap_id;
+
+ cap_id = xhci_readl(xhci, addr);
+ if (XHCI_EXT_CAPS_ID(cap_id) == XHCI_EXT_CAPS_PROTOCOL)
+ xhci_add_in_port(xhci, num_ports, addr,
+ (u8) XHCI_EXT_PORT_MAJOR(cap_id));
+ offset = XHCI_EXT_CAPS_NEXT(cap_id);
+ if (!offset || (xhci->num_usb2_ports + xhci->num_usb3_ports)
+ == num_ports)
+ break;
+ /*
+ * Once you're into the Extended Capabilities, the offset is
+ * always relative to the register holding the offset.
+ */
+ addr += offset;
+ }
+
+ if (xhci->num_usb2_ports == 0 && xhci->num_usb3_ports == 0) {
+ xhci_warn(xhci, "No ports on the roothubs?\n");
+ return -ENODEV;
+ }
+ xhci_dbg(xhci, "Found %u USB 2.0 ports and %u USB 3.0 ports.\n",
+ xhci->num_usb2_ports, xhci->num_usb3_ports);
+ /*
+ * Note we could have all USB 3.0 ports, or all USB 2.0 ports.
+ * Not sure how the USB core will handle a hub with no ports...
+ */
+ if (xhci->num_usb2_ports) {
+ xhci->usb2_ports = kmalloc(sizeof(*xhci->usb2_ports)*
+ xhci->num_usb2_ports, flags);
+ if (!xhci->usb2_ports)
+ return -ENOMEM;
+
+ port_index = 0;
+ for (i = 0; i < num_ports; i++)
+ if (xhci->port_array[i] != 0x03) {
+ xhci->usb2_ports[port_index] =
+ &xhci->op_regs->port_status_base +
+ NUM_PORT_REGS*i;
+ xhci_dbg(xhci, "USB 2.0 port at index %u, "
+ "addr = %p\n", i,
+ xhci->usb2_ports[port_index]);
+ port_index++;
+ }
+ }
+ if (xhci->num_usb3_ports) {
+ xhci->usb3_ports = kmalloc(sizeof(*xhci->usb3_ports)*
+ xhci->num_usb3_ports, flags);
+ if (!xhci->usb3_ports)
+ return -ENOMEM;
+
+ port_index = 0;
+ for (i = 0; i < num_ports; i++)
+ if (xhci->port_array[i] == 0x03) {
+ xhci->usb3_ports[port_index] =
+ &xhci->op_regs->port_status_base +
+ NUM_PORT_REGS*i;
+ xhci_dbg(xhci, "USB 3.0 port at index %u, "
+ "addr = %p\n", i,
+ xhci->usb3_ports[port_index]);
+ port_index++;
+ }
+ }
+ return 0;
+}
int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags)
{
@@ -1809,6 +1971,8 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags)
if (scratchpad_alloc(xhci, flags))
goto fail;
+ if (xhci_setup_port_arrays(xhci, flags))
+ goto fail;
return 0;
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 06fca0835b52..45e4a3108cc3 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -1549,6 +1549,15 @@ static int xhci_configure_endpoint(struct xhci_hcd *xhci,
cmd_completion = command->completion;
cmd_status = &command->status;
command->command_trb = xhci->cmd_ring->enqueue;
+
+ /* Enqueue pointer can be left pointing to the link TRB,
+ * we must handle that
+ */
+ if ((command->command_trb->link.control & TRB_TYPE_BITMASK)
+ == TRB_TYPE(TRB_LINK))
+ command->command_trb =
+ xhci->cmd_ring->enq_seg->next->trbs;
+
list_add_tail(&command->cmd_list, &virt_dev->cmd_list);
} else {
in_ctx = virt_dev->in_ctx;
@@ -2272,6 +2281,15 @@ int xhci_discover_or_reset_device(struct usb_hcd *hcd, struct usb_device *udev)
/* Attempt to submit the Reset Device command to the command ring */
spin_lock_irqsave(&xhci->lock, flags);
reset_device_cmd->command_trb = xhci->cmd_ring->enqueue;
+
+ /* Enqueue pointer can be left pointing to the link TRB,
+ * we must handle that
+ */
+ if ((reset_device_cmd->command_trb->link.control & TRB_TYPE_BITMASK)
+ == TRB_TYPE(TRB_LINK))
+ reset_device_cmd->command_trb =
+ xhci->cmd_ring->enq_seg->next->trbs;
+
list_add_tail(&reset_device_cmd->cmd_list, &virt_dev->cmd_list);
ret = xhci_queue_reset_device(xhci, slot_id);
if (ret) {
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index 85e65647d445..170c367112d2 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -454,6 +454,24 @@ struct xhci_doorbell_array {
/**
+ * struct xhci_protocol_caps
+ * @revision: major revision, minor revision, capability ID,
+ * and next capability pointer.
+ * @name_string: Four ASCII characters to say which spec this xHC
+ * follows, typically "USB ".
+ * @port_info: Port offset, count, and protocol-defined information.
+ */
+struct xhci_protocol_caps {
+ u32 revision;
+ u32 name_string;
+ u32 port_info;
+};
+
+#define XHCI_EXT_PORT_MAJOR(x) (((x) >> 24) & 0xff)
+#define XHCI_EXT_PORT_OFF(x) ((x) & 0xff)
+#define XHCI_EXT_PORT_COUNT(x) (((x) >> 8) & 0xff)
+
+/**
* struct xhci_container_ctx
* @type: Type of context. Used to calculated offsets to contained contexts.
* @size: Size of the context data
@@ -1240,6 +1258,14 @@ struct xhci_hcd {
u32 suspended_ports[8]; /* which ports are
suspended */
unsigned long resume_done[MAX_HC_PORTS];
+ /* Is each xHCI roothub port a USB 3.0, USB 2.0, or USB 1.1 port? */
+ u8 *port_array;
+ /* Array of pointers to USB 3.0 PORTSC registers */
+ u32 __iomem **usb3_ports;
+ unsigned int num_usb3_ports;
+ /* Array of pointers to USB 2.0 PORTSC registers */
+ u32 __iomem **usb2_ports;
+ unsigned int num_usb2_ports;
};
/* For testing purposes */
diff --git a/drivers/usb/misc/yurex.c b/drivers/usb/misc/yurex.c
index 719c6180b31f..ac5bfd619e62 100644
--- a/drivers/usb/misc/yurex.c
+++ b/drivers/usb/misc/yurex.c
@@ -536,6 +536,7 @@ static const struct file_operations yurex_fops = {
.open = yurex_open,
.release = yurex_release,
.fasync = yurex_fasync,
+ .llseek = default_llseek,
};
diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index e6669fc3b804..99beebce8550 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -2116,12 +2116,15 @@ bad_config:
* Otherwise, wait till the gadget driver hooks up.
*/
if (!is_otg_enabled(musb) && is_host_enabled(musb)) {
+ struct usb_hcd *hcd = musb_to_hcd(musb);
+
MUSB_HST_MODE(musb);
musb->xceiv->default_a = 1;
musb->xceiv->state = OTG_STATE_A_IDLE;
status = usb_add_hcd(musb_to_hcd(musb), -1, 0);
+ hcd->self.uses_pio_for_control = 1;
DBG(1, "%s mode, status %d, devctl %02x %c\n",
"HOST", status,
musb_readb(musb->mregs, MUSB_DEVCTL),
diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c
index 36cfd060dbe5..9d6ade82b9f2 100644
--- a/drivers/usb/musb/musb_gadget.c
+++ b/drivers/usb/musb/musb_gadget.c
@@ -92,6 +92,59 @@
/* ----------------------------------------------------------------------- */
+/* Maps the buffer to dma */
+
+static inline void map_dma_buffer(struct musb_request *request,
+ struct musb *musb)
+{
+ if (request->request.dma == DMA_ADDR_INVALID) {
+ request->request.dma = dma_map_single(
+ musb->controller,
+ request->request.buf,
+ request->request.length,
+ request->tx
+ ? DMA_TO_DEVICE
+ : DMA_FROM_DEVICE);
+ request->mapped = 1;
+ } else {
+ dma_sync_single_for_device(musb->controller,
+ request->request.dma,
+ request->request.length,
+ request->tx
+ ? DMA_TO_DEVICE
+ : DMA_FROM_DEVICE);
+ request->mapped = 0;
+ }
+}
+
+/* Unmap the buffer from dma and maps it back to cpu */
+static inline void unmap_dma_buffer(struct musb_request *request,
+ struct musb *musb)
+{
+ if (request->request.dma == DMA_ADDR_INVALID) {
+ DBG(20, "not unmapping a never mapped buffer\n");
+ return;
+ }
+ if (request->mapped) {
+ dma_unmap_single(musb->controller,
+ request->request.dma,
+ request->request.length,
+ request->tx
+ ? DMA_TO_DEVICE
+ : DMA_FROM_DEVICE);
+ request->request.dma = DMA_ADDR_INVALID;
+ request->mapped = 0;
+ } else {
+ dma_sync_single_for_cpu(musb->controller,
+ request->request.dma,
+ request->request.length,
+ request->tx
+ ? DMA_TO_DEVICE
+ : DMA_FROM_DEVICE);
+
+ }
+}
+
/*
* Immediately complete a request.
*
@@ -119,24 +172,8 @@ __acquires(ep->musb->lock)
ep->busy = 1;
spin_unlock(&musb->lock);
- if (is_dma_capable()) {
- if (req->mapped) {
- dma_unmap_single(musb->controller,
- req->request.dma,
- req->request.length,
- req->tx
- ? DMA_TO_DEVICE
- : DMA_FROM_DEVICE);
- req->request.dma = DMA_ADDR_INVALID;
- req->mapped = 0;
- } else if (req->request.dma != DMA_ADDR_INVALID)
- dma_sync_single_for_cpu(musb->controller,
- req->request.dma,
- req->request.length,
- req->tx
- ? DMA_TO_DEVICE
- : DMA_FROM_DEVICE);
- }
+ if (is_dma_capable() && ep->dma)
+ unmap_dma_buffer(req, musb);
if (request->status == 0)
DBG(5, "%s done request %p, %d/%d\n",
ep->end_point.name, request,
@@ -395,6 +432,13 @@ static void txstate(struct musb *musb, struct musb_request *req)
#endif
if (!use_dma) {
+ /*
+ * Unmap the dma buffer back to cpu if dma channel
+ * programming fails
+ */
+ if (is_dma_capable() && musb_ep->dma)
+ unmap_dma_buffer(req, musb);
+
musb_write_fifo(musb_ep->hw_ep, fifo_count,
(u8 *) (request->buf + request->actual));
request->actual += fifo_count;
@@ -713,6 +757,21 @@ static void rxstate(struct musb *musb, struct musb_request *req)
return;
}
#endif
+ /*
+ * Unmap the dma buffer back to cpu if dma channel
+ * programming fails. This buffer is mapped if the
+ * channel allocation is successful
+ */
+ if (is_dma_capable() && musb_ep->dma) {
+ unmap_dma_buffer(req, musb);
+
+ /*
+ * Clear DMAENAB and AUTOCLEAR for the
+ * PIO mode transfer
+ */
+ csr &= ~(MUSB_RXCSR_DMAENAB | MUSB_RXCSR_AUTOCLEAR);
+ musb_writew(epio, MUSB_RXCSR, csr);
+ }
musb_read_fifo(musb_ep->hw_ep, fifo_count, (u8 *)
(request->buf + request->actual));
@@ -837,7 +896,9 @@ void musb_g_rx(struct musb *musb, u8 epnum)
if (!request)
return;
}
+#if defined(CONFIG_USB_INVENTRA_DMA) || defined(CONFIG_USB_TUSB_OMAP_DMA)
exit:
+#endif
/* Analyze request */
rxstate(musb, to_musb_request(request));
}
@@ -1150,26 +1211,9 @@ static int musb_gadget_queue(struct usb_ep *ep, struct usb_request *req,
request->epnum = musb_ep->current_epnum;
request->tx = musb_ep->is_in;
- if (is_dma_capable() && musb_ep->dma) {
- if (request->request.dma == DMA_ADDR_INVALID) {
- request->request.dma = dma_map_single(
- musb->controller,
- request->request.buf,
- request->request.length,
- request->tx
- ? DMA_TO_DEVICE
- : DMA_FROM_DEVICE);
- request->mapped = 1;
- } else {
- dma_sync_single_for_device(musb->controller,
- request->request.dma,
- request->request.length,
- request->tx
- ? DMA_TO_DEVICE
- : DMA_FROM_DEVICE);
- request->mapped = 0;
- }
- } else
+ if (is_dma_capable() && musb_ep->dma)
+ map_dma_buffer(request, musb);
+ else
request->mapped = 0;
spin_lock_irqsave(&musb->lock, lockflags);
@@ -1789,6 +1833,8 @@ int usb_gadget_probe_driver(struct usb_gadget_driver *driver,
spin_unlock_irqrestore(&musb->lock, flags);
if (is_otg_enabled(musb)) {
+ struct usb_hcd *hcd = musb_to_hcd(musb);
+
DBG(3, "OTG startup...\n");
/* REVISIT: funcall to other code, which also
@@ -1803,6 +1849,8 @@ int usb_gadget_probe_driver(struct usb_gadget_driver *driver,
musb->gadget_driver = NULL;
musb->g.dev.driver = NULL;
spin_unlock_irqrestore(&musb->lock, flags);
+ } else {
+ hcd->self.uses_pio_for_control = 1;
}
}
}
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 76f8b3556672..6a50965e23f2 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -201,6 +201,7 @@ static struct usb_device_id id_table_combined [] = {
{ USB_DEVICE(FTDI_VID, FTDI_MTXORB_5_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_MTXORB_6_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_R2000KU_TRUE_RNG) },
+ { USB_DEVICE(FTDI_VID, FTDI_VARDAAN_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0100_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0101_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0102_PID) },
@@ -696,6 +697,7 @@ static struct usb_device_id id_table_combined [] = {
.driver_info = (kernel_ulong_t)&ftdi_NDI_device_quirk },
{ USB_DEVICE(TELLDUS_VID, TELLDUS_TELLSTICK_PID) },
{ USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_SERIAL_VX7_PID) },
+ { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_CT29B_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_MAXSTREAM_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_PHI_FISCO_PID) },
{ USB_DEVICE(TML_VID, TML_USB_SERIAL_PID) },
diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h
index 263f62551197..1286f1e23d8c 100644
--- a/drivers/usb/serial/ftdi_sio_ids.h
+++ b/drivers/usb/serial/ftdi_sio_ids.h
@@ -114,6 +114,9 @@
/* Lenz LI-USB Computer Interface. */
#define FTDI_LENZ_LIUSB_PID 0xD780
+/* Vardaan Enterprises Serial Interface VEUSB422R3 */
+#define FTDI_VARDAAN_PID 0xF070
+
/*
* Xsens Technologies BV products (http://www.xsens.com).
*/
@@ -721,6 +724,7 @@
*/
#define RTSYSTEMS_VID 0x2100 /* Vendor ID */
#define RTSYSTEMS_SERIAL_VX7_PID 0x9e52 /* Serial converter for VX-7 Radios using FT232RL */
+#define RTSYSTEMS_CT29B_PID 0x9e54 /* CT29B Radio Cable */
/*
* Bayer Ascensia Contour blood glucose meter USB-converter cable.
diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c
index 861223f2af6e..6954de50c0ff 100644
--- a/drivers/usb/serial/usb-serial.c
+++ b/drivers/usb/serial/usb-serial.c
@@ -51,6 +51,7 @@ static struct usb_driver usb_serial_driver = {
.suspend = usb_serial_suspend,
.resume = usb_serial_resume,
.no_dynamic_id = 1,
+ .supports_autosuspend = 1,
};
/* There is no MODULE_DEVICE_TABLE for usbserial.c. Instead
@@ -1343,6 +1344,8 @@ int usb_serial_register(struct usb_serial_driver *driver)
return -ENODEV;
fixup_generic(driver);
+ if (driver->usb_driver)
+ driver->usb_driver->supports_autosuspend = 1;
if (!driver->description)
driver->description = driver->driver.name;
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index 4a291045ebac..a5ad77ef4266 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -558,6 +558,9 @@ config IT8712F_WDT
This is the driver for the built-in watchdog timer on the IT8712F
Super I/0 chipset used on many motherboards.
+ If the driver does not work, then make sure that the game port in
+ the BIOS is enabled.
+
To compile this driver as a module, choose M here: the
module will be called it8712f_wdt.
diff --git a/drivers/watchdog/bcm63xx_wdt.c b/drivers/watchdog/bcm63xx_wdt.c
index a1debc89356b..3c5045a206dd 100644
--- a/drivers/watchdog/bcm63xx_wdt.c
+++ b/drivers/watchdog/bcm63xx_wdt.c
@@ -18,7 +18,6 @@
#include <linux/miscdevice.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
-#include <linux/reboot.h>
#include <linux/types.h>
#include <linux/uaccess.h>
#include <linux/watchdog.h>
@@ -220,14 +219,6 @@ static long bcm63xx_wdt_ioctl(struct file *file, unsigned int cmd,
}
}
-static int bcm63xx_wdt_notify_sys(struct notifier_block *this,
- unsigned long code, void *unused)
-{
- if (code == SYS_DOWN || code == SYS_HALT)
- bcm63xx_wdt_pause();
- return NOTIFY_DONE;
-}
-
static const struct file_operations bcm63xx_wdt_fops = {
.owner = THIS_MODULE,
.llseek = no_llseek,
@@ -243,12 +234,8 @@ static struct miscdevice bcm63xx_wdt_miscdev = {
.fops = &bcm63xx_wdt_fops,
};
-static struct notifier_block bcm63xx_wdt_notifier = {
- .notifier_call = bcm63xx_wdt_notify_sys,
-};
-
-static int bcm63xx_wdt_probe(struct platform_device *pdev)
+static int __devinit bcm63xx_wdt_probe(struct platform_device *pdev)
{
int ret;
struct resource *r;
@@ -280,16 +267,10 @@ static int bcm63xx_wdt_probe(struct platform_device *pdev)
wdt_time);
}
- ret = register_reboot_notifier(&bcm63xx_wdt_notifier);
- if (ret) {
- dev_err(&pdev->dev, "failed to register reboot_notifier\n");
- goto unregister_timer;
- }
-
ret = misc_register(&bcm63xx_wdt_miscdev);
if (ret < 0) {
dev_err(&pdev->dev, "failed to register watchdog device\n");
- goto unregister_reboot_notifier;
+ goto unregister_timer;
}
dev_info(&pdev->dev, " started, timer margin: %d sec\n",
@@ -297,8 +278,6 @@ static int bcm63xx_wdt_probe(struct platform_device *pdev)
return 0;
-unregister_reboot_notifier:
- unregister_reboot_notifier(&bcm63xx_wdt_notifier);
unregister_timer:
bcm63xx_timer_unregister(TIMER_WDT_ID);
unmap:
@@ -306,25 +285,28 @@ unmap:
return ret;
}
-static int bcm63xx_wdt_remove(struct platform_device *pdev)
+static int __devexit bcm63xx_wdt_remove(struct platform_device *pdev)
{
if (!nowayout)
bcm63xx_wdt_pause();
misc_deregister(&bcm63xx_wdt_miscdev);
-
- iounmap(bcm63xx_wdt_device.regs);
-
- unregister_reboot_notifier(&bcm63xx_wdt_notifier);
bcm63xx_timer_unregister(TIMER_WDT_ID);
-
+ iounmap(bcm63xx_wdt_device.regs);
return 0;
}
+static void bcm63xx_wdt_shutdown(struct platform_device *pdev)
+{
+ bcm63xx_wdt_pause();
+}
+
static struct platform_driver bcm63xx_wdt = {
.probe = bcm63xx_wdt_probe,
- .remove = bcm63xx_wdt_remove,
+ .remove = __devexit_p(bcm63xx_wdt_remove),
+ .shutdown = bcm63xx_wdt_shutdown,
.driver = {
+ .owner = THIS_MODULE,
.name = "bcm63xx-wdt",
}
};
diff --git a/drivers/watchdog/gef_wdt.c b/drivers/watchdog/gef_wdt.c
index 9c21d19043a6..f6bd6f10fcec 100644
--- a/drivers/watchdog/gef_wdt.c
+++ b/drivers/watchdog/gef_wdt.c
@@ -30,6 +30,7 @@
#include <linux/module.h>
#include <linux/miscdevice.h>
#include <linux/watchdog.h>
+#include <linux/fs.h>
#include <linux/of.h>
#include <linux/of_platform.h>
#include <linux/io.h>
diff --git a/drivers/watchdog/iTCO_wdt.c b/drivers/watchdog/iTCO_wdt.c
index f7e90fe47b71..b8838d2c67a6 100644
--- a/drivers/watchdog/iTCO_wdt.c
+++ b/drivers/watchdog/iTCO_wdt.c
@@ -32,6 +32,7 @@
* document number 322169-001, 322170-003: 5 Series, 3400 Series (PCH)
* document number 320066-003, 320257-008: EP80597 (IICH)
* document number TBD : Cougar Point (CPT)
+ * document number TBD : Patsburg (PBG)
*/
/*
@@ -146,7 +147,8 @@ enum iTCO_chipsets {
TCO_CPT29, /* Cougar Point */
TCO_CPT30, /* Cougar Point */
TCO_CPT31, /* Cougar Point */
- TCO_PBG, /* Patsburg */
+ TCO_PBG1, /* Patsburg */
+ TCO_PBG2, /* Patsburg */
};
static struct {
@@ -235,6 +237,7 @@ static struct {
{"Cougar Point", 2},
{"Cougar Point", 2},
{"Patsburg", 2},
+ {"Patsburg", 2},
{NULL, 0}
};
@@ -350,7 +353,8 @@ static struct pci_device_id iTCO_wdt_pci_tbl[] = {
{ ITCO_PCI_DEVICE(0x1c5d, TCO_CPT29)},
{ ITCO_PCI_DEVICE(0x1c5e, TCO_CPT30)},
{ ITCO_PCI_DEVICE(0x1c5f, TCO_CPT31)},
- { ITCO_PCI_DEVICE(0x1d40, TCO_PBG)},
+ { ITCO_PCI_DEVICE(0x1d40, TCO_PBG1)},
+ { ITCO_PCI_DEVICE(0x1d41, TCO_PBG2)},
{ 0, }, /* End of list */
};
MODULE_DEVICE_TABLE(pci, iTCO_wdt_pci_tbl);