summaryrefslogtreecommitdiff
path: root/drivers
diff options
context:
space:
mode:
Diffstat (limited to 'drivers')
-rw-r--r--drivers/acpi/acpica/utresrc.c2
-rw-r--r--drivers/acpi/video.c2
-rw-r--r--drivers/base/memory.c9
-rw-r--r--drivers/dma/dmatest.c6
-rw-r--r--drivers/dma/dw_dmac.c2
-rw-r--r--drivers/firmware/efivars.c2
-rw-r--r--drivers/firmware/iscsi_ibft.c4
-rw-r--r--drivers/gpio/ab8500-gpio.c7
-rw-r--r--drivers/gpio/langwell_gpio.c2
-rw-r--r--drivers/gpu/drm/radeon/radeon_fence.c2
-rw-r--r--drivers/gpu/drm/radeon/radeon_ring.c2
-rw-r--r--drivers/gpu/drm/ttm/ttm_object.c2
-rw-r--r--drivers/i2c/busses/i2c-gpio.c2
-rw-r--r--drivers/leds/leds-mc13783.c2
-rw-r--r--drivers/macintosh/therm_pm72.c4
-rw-r--r--drivers/md/raid5.c2
-rw-r--r--drivers/media/dvb/dvb-usb/dw2102.c2
-rw-r--r--drivers/media/video/msp3400-driver.c2
-rw-r--r--drivers/media/video/saa7164/saa7164-encoder.c2
-rw-r--r--drivers/media/video/saa7164/saa7164-vbi.c2
-rw-r--r--drivers/media/video/usbvision/usbvision-video.c5
-rw-r--r--drivers/message/fusion/mptbase.c22
-rw-r--r--drivers/message/i2o/README.ioctl2
-rw-r--r--drivers/misc/bh1780gli.c8
-rw-r--r--drivers/misc/cs5535-mfgpt.c4
-rw-r--r--drivers/misc/ibmasm/ibmasmfs.c2
-rw-r--r--drivers/misc/spear13xx_pcie_gadget.c4
-rw-r--r--drivers/mmc/host/atmel-mci.c2
-rw-r--r--drivers/net/atlx/atl1.c5
-rw-r--r--drivers/net/can/pch_can.c2
-rw-r--r--drivers/net/can/softing/softing_main.c2
-rw-r--r--drivers/net/irda/ali-ircc.c2
-rw-r--r--drivers/net/macb.c2
-rw-r--r--drivers/net/s2io.c2
-rw-r--r--drivers/net/sgiseeq.c2
-rw-r--r--drivers/net/sgiseeq.h2
-rw-r--r--drivers/net/ucc_geth_ethtool.c2
-rw-r--r--drivers/net/usb/usbnet.c2
-rw-r--r--drivers/net/wan/pc300_drv.c2
-rw-r--r--drivers/net/wireless/airo.c27
-rw-r--r--drivers/net/wireless/ath/ath9k/ar9003_eeprom.c8
-rw-r--r--drivers/net/wireless/b43/b43.h4
-rw-r--r--drivers/net/wireless/ipw2x00/ipw2200.c2
-rw-r--r--drivers/net/wireless/iwlegacy/iwl-4965-calib.c4
-rw-r--r--drivers/net/wireless/iwlwifi/iwl-agn-calib.c4
-rw-r--r--drivers/net/wireless/iwlwifi/iwl-agn.c2
-rw-r--r--drivers/net/wireless/rtlwifi/core.c2
-rw-r--r--drivers/net/wireless/rtlwifi/rtl8192ce/hw.c4
-rw-r--r--drivers/platform/x86/Kconfig2
-rw-r--r--drivers/power/intel_mid_battery.c2
-rw-r--r--drivers/regulator/max8998.c4
-rw-r--r--drivers/regulator/mc13783-regulator.c2
-rw-r--r--drivers/scsi/aic7xxx/aicasm/aicasm_symbol.c2
-rw-r--r--drivers/scsi/aic7xxx/aicasm/aicasm_symbol.h2
-rw-r--r--drivers/scsi/be2iscsi/be_main.c4
-rw-r--r--drivers/scsi/constants.c2
-rw-r--r--drivers/scsi/esp_scsi.c2
-rw-r--r--drivers/scsi/lpfc/lpfc_attr.c2
-rw-r--r--drivers/scsi/lpfc/lpfc_bsg.c2
-rw-r--r--drivers/scsi/lpfc/lpfc_hw.h2
-rw-r--r--drivers/scsi/lpfc/lpfc_sli.c2
-rw-r--r--drivers/scsi/nsp32_debug.c2
-rw-r--r--drivers/scsi/pcmcia/nsp_debug.c2
-rw-r--r--drivers/scsi/pm8001/pm8001_init.c2
-rw-r--r--drivers/scsi/qla2xxx/qla_isr.c4
-rw-r--r--drivers/scsi/qla4xxx/ql4_mbx.c2
-rw-r--r--drivers/scsi/sgiwd93.c2
-rw-r--r--drivers/spi/atmel_spi.c2
-rw-r--r--drivers/target/target_core_alua.c4
-rw-r--r--drivers/target/target_core_transport.c2
-rw-r--r--drivers/tty/n_gsm.c2
-rw-r--r--drivers/tty/serial/bfin_sport_uart.c3
-rw-r--r--drivers/tty/serial/mfd.c4
-rw-r--r--drivers/tty/serial/mrst_max3110.c2
-rw-r--r--drivers/tty/tty_ioctl.c2
-rw-r--r--drivers/usb/gadget/atmel_usba_udc.c2
-rw-r--r--drivers/usb/host/imx21-dbg.c2
-rw-r--r--drivers/usb/host/uhci-hcd.c7
-rw-r--r--drivers/usb/misc/usbtest.c2
-rw-r--r--drivers/usb/storage/ene_ub6250.c4
-rw-r--r--drivers/video/backlight/ltv350qv.c2
-rw-r--r--drivers/video/console/newport_con.c2
-rw-r--r--drivers/video/msm/mddi.c2
-rw-r--r--drivers/video/mxsfb.c2
-rw-r--r--drivers/watchdog/bcm63xx_wdt.c2
-rw-r--r--drivers/xen/evtchn.c2
-rw-r--r--drivers/xen/swiotlb-xen.c2
87 files changed, 143 insertions, 144 deletions
diff --git a/drivers/acpi/acpica/utresrc.c b/drivers/acpi/acpica/utresrc.c
index 84e051844247..6ffd3a8bdaa5 100644
--- a/drivers/acpi/acpica/utresrc.c
+++ b/drivers/acpi/acpica/utresrc.c
@@ -50,7 +50,7 @@ ACPI_MODULE_NAME("utresrc")
#if defined(ACPI_DISASSEMBLER) || defined (ACPI_DEBUGGER)
/*
* Strings used to decode resource descriptors.
- * Used by both the disasssembler and the debugger resource dump routines
+ * Used by both the disassembler and the debugger resource dump routines
*/
const char *acpi_gbl_bm_decode[] = {
"NotBusMaster",
diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c
index ec574fc8fbc6..db39e9e607d8 100644
--- a/drivers/acpi/video.c
+++ b/drivers/acpi/video.c
@@ -1521,7 +1521,7 @@ static void acpi_video_device_notify(acpi_handle handle, u32 event, void *data)
acpi_bus_generate_proc_event(device, event, 0);
keycode = KEY_BRIGHTNESSDOWN;
break;
- case ACPI_VIDEO_NOTIFY_ZERO_BRIGHTNESS: /* zero brightnesss */
+ case ACPI_VIDEO_NOTIFY_ZERO_BRIGHTNESS: /* zero brightness */
if (brightness_switch_enabled)
acpi_video_switch_brightness(video_device, event);
acpi_bus_generate_proc_event(device, event, 0);
diff --git a/drivers/base/memory.c b/drivers/base/memory.c
index 0a134a424a37..9f9b2359f718 100644
--- a/drivers/base/memory.c
+++ b/drivers/base/memory.c
@@ -389,15 +389,14 @@ memory_probe_store(struct class *class, struct class_attribute *attr,
ret = add_memory(nid, phys_addr,
PAGES_PER_SECTION << PAGE_SHIFT);
if (ret)
- break;
+ goto out;
phys_addr += MIN_MEMORY_BLOCK_SIZE;
}
- if (ret)
- count = ret;
-
- return count;
+ ret = count;
+out:
+ return ret;
}
static CLASS_ATTR(probe, S_IWUSR, NULL, memory_probe_store);
diff --git a/drivers/dma/dmatest.c b/drivers/dma/dmatest.c
index e0888cb538d4..b4f5c32b6a47 100644
--- a/drivers/dma/dmatest.c
+++ b/drivers/dma/dmatest.c
@@ -56,8 +56,8 @@ MODULE_PARM_DESC(pq_sources,
static int timeout = 3000;
module_param(timeout, uint, S_IRUGO);
-MODULE_PARM_DESC(timeout, "Transfer Timeout in msec (default: 3000), \
- Pass -1 for infinite timeout");
+MODULE_PARM_DESC(timeout, "Transfer Timeout in msec (default: 3000), "
+ "Pass -1 for infinite timeout");
/*
* Initialization patterns. All bytes in the source buffer has bit 7
@@ -634,5 +634,5 @@ static void __exit dmatest_exit(void)
}
module_exit(dmatest_exit);
-MODULE_AUTHOR("Haavard Skinnemoen <hskinnemoen@atmel.com>");
+MODULE_AUTHOR("Haavard Skinnemoen (Atmel)");
MODULE_LICENSE("GPL v2");
diff --git a/drivers/dma/dw_dmac.c b/drivers/dma/dw_dmac.c
index 9c25c7d099e4..2a2e2fa00e91 100644
--- a/drivers/dma/dw_dmac.c
+++ b/drivers/dma/dw_dmac.c
@@ -1486,4 +1486,4 @@ module_exit(dw_exit);
MODULE_LICENSE("GPL v2");
MODULE_DESCRIPTION("Synopsys DesignWare DMA Controller driver");
-MODULE_AUTHOR("Haavard Skinnemoen <haavard.skinnemoen@atmel.com>");
+MODULE_AUTHOR("Haavard Skinnemoen (Atmel)");
diff --git a/drivers/firmware/efivars.c b/drivers/firmware/efivars.c
index a2d2f1f0d4f3..5f29aafd4462 100644
--- a/drivers/firmware/efivars.c
+++ b/drivers/firmware/efivars.c
@@ -321,7 +321,7 @@ efivar_show_raw(struct efivar_entry *entry, char *buf)
/*
* Generic read/write functions that call the specific functions of
- * the atttributes...
+ * the attributes...
*/
static ssize_t efivar_attr_show(struct kobject *kobj, struct attribute *attr,
char *buf)
diff --git a/drivers/firmware/iscsi_ibft.c b/drivers/firmware/iscsi_ibft.c
index 6148a1c67895..ce33f4626957 100644
--- a/drivers/firmware/iscsi_ibft.c
+++ b/drivers/firmware/iscsi_ibft.c
@@ -87,8 +87,8 @@
#define IBFT_ISCSI_VERSION "0.5.0"
#define IBFT_ISCSI_DATE "2010-Feb-25"
-MODULE_AUTHOR("Peter Jones <pjones@redhat.com> and \
-Konrad Rzeszutek <ketuzsezr@darnok.org>");
+MODULE_AUTHOR("Peter Jones <pjones@redhat.com> and "
+ "Konrad Rzeszutek <ketuzsezr@darnok.org>");
MODULE_DESCRIPTION("sysfs interface to BIOS iBFT information");
MODULE_LICENSE("GPL");
MODULE_VERSION(IBFT_ISCSI_VERSION);
diff --git a/drivers/gpio/ab8500-gpio.c b/drivers/gpio/ab8500-gpio.c
index e7b834d054b7..970053c89ff7 100644
--- a/drivers/gpio/ab8500-gpio.c
+++ b/drivers/gpio/ab8500-gpio.c
@@ -482,8 +482,8 @@ static int __devexit ab8500_gpio_remove(struct platform_device *pdev)
ret = gpiochip_remove(&ab8500_gpio->chip);
if (ret < 0) {
- dev_err(ab8500_gpio->dev, "unable to remove gpiochip:\
- %d\n", ret);
+ dev_err(ab8500_gpio->dev, "unable to remove gpiochip: %d\n",
+ ret);
return ret;
}
@@ -516,7 +516,6 @@ static void __exit ab8500_gpio_exit(void)
module_exit(ab8500_gpio_exit);
MODULE_AUTHOR("BIBEK BASU <bibek.basu@stericsson.com>");
-MODULE_DESCRIPTION("Driver allows to use AB8500 unused pins\
- to be used as GPIO");
+MODULE_DESCRIPTION("Driver allows to use AB8500 unused pins to be used as GPIO");
MODULE_ALIAS("AB8500 GPIO driver");
MODULE_LICENSE("GPL v2");
diff --git a/drivers/gpio/langwell_gpio.c b/drivers/gpio/langwell_gpio.c
index 560ab648cf18..1b06f67e1f69 100644
--- a/drivers/gpio/langwell_gpio.c
+++ b/drivers/gpio/langwell_gpio.c
@@ -122,7 +122,7 @@ static int lnw_gpio_direction_output(struct gpio_chip *chip,
lnw_gpio_set(chip, offset, value);
spin_lock_irqsave(&lnw->lock, flags);
value = readl(gpdr);
- value |= BIT(offset % 32);;
+ value |= BIT(offset % 32);
writel(value, gpdr);
spin_unlock_irqrestore(&lnw->lock, flags);
return 0;
diff --git a/drivers/gpu/drm/radeon/radeon_fence.c b/drivers/gpu/drm/radeon/radeon_fence.c
index bbcd1dd7bac0..1f8229436570 100644
--- a/drivers/gpu/drm/radeon/radeon_fence.c
+++ b/drivers/gpu/drm/radeon/radeon_fence.c
@@ -322,7 +322,7 @@ void radeon_fence_unref(struct radeon_fence **fence)
*fence = NULL;
if (tmp) {
- kref_put(&tmp->kref, &radeon_fence_destroy);
+ kref_put(&tmp->kref, radeon_fence_destroy);
}
}
diff --git a/drivers/gpu/drm/radeon/radeon_ring.c b/drivers/gpu/drm/radeon/radeon_ring.c
index c6776e48fdde..08c0233db1b8 100644
--- a/drivers/gpu/drm/radeon/radeon_ring.c
+++ b/drivers/gpu/drm/radeon/radeon_ring.c
@@ -194,7 +194,7 @@ int radeon_ib_pool_init(struct radeon_device *rdev)
r = radeon_bo_kmap(rdev->ib_pool.robj, &ptr);
radeon_bo_unreserve(rdev->ib_pool.robj);
if (r) {
- DRM_ERROR("radeon: failed to map ib poll (%d).\n", r);
+ DRM_ERROR("radeon: failed to map ib pool (%d).\n", r);
return r;
}
for (i = 0; i < RADEON_IB_POOL_SIZE; i++) {
diff --git a/drivers/gpu/drm/ttm/ttm_object.c b/drivers/gpu/drm/ttm/ttm_object.c
index 75e9d6f86ba4..ebddd443d91a 100644
--- a/drivers/gpu/drm/ttm/ttm_object.c
+++ b/drivers/gpu/drm/ttm/ttm_object.c
@@ -206,7 +206,7 @@ void ttm_base_object_unref(struct ttm_base_object **p_base)
*/
write_lock(&tdev->object_lock);
- (void)kref_put(&base->refcount, &ttm_release_base);
+ kref_put(&base->refcount, ttm_release_base);
write_unlock(&tdev->object_lock);
}
EXPORT_SYMBOL(ttm_base_object_unref);
diff --git a/drivers/i2c/busses/i2c-gpio.c b/drivers/i2c/busses/i2c-gpio.c
index d9aa9a649e35..a651779d9ff7 100644
--- a/drivers/i2c/busses/i2c-gpio.c
+++ b/drivers/i2c/busses/i2c-gpio.c
@@ -219,7 +219,7 @@ static void __exit i2c_gpio_exit(void)
}
module_exit(i2c_gpio_exit);
-MODULE_AUTHOR("Haavard Skinnemoen <hskinnemoen@atmel.com>");
+MODULE_AUTHOR("Haavard Skinnemoen (Atmel)");
MODULE_DESCRIPTION("Platform-independent bitbanging I2C driver");
MODULE_LICENSE("GPL");
MODULE_ALIAS("platform:i2c-gpio");
diff --git a/drivers/leds/leds-mc13783.c b/drivers/leds/leds-mc13783.c
index 06a5bb484707..126ca7955f6e 100644
--- a/drivers/leds/leds-mc13783.c
+++ b/drivers/leds/leds-mc13783.c
@@ -235,7 +235,7 @@ static int __devinit mc13783_leds_prepare(struct platform_device *pdev)
MC13783_LED_Cx_PERIOD;
if (pdata->flags & MC13783_LED_TRIODE_TC3)
- reg |= MC13783_LED_Cx_TRIODE_TC_BIT;;
+ reg |= MC13783_LED_Cx_TRIODE_TC_BIT;
ret = mc13783_reg_write(dev, MC13783_REG_LED_CONTROL_5, reg);
if (ret)
diff --git a/drivers/macintosh/therm_pm72.c b/drivers/macintosh/therm_pm72.c
index bb8b722a9783..0ff92c208005 100644
--- a/drivers/macintosh/therm_pm72.c
+++ b/drivers/macintosh/therm_pm72.c
@@ -44,11 +44,11 @@
* TODO: - Check MPU structure version/signature
* - Add things like /sbin/overtemp for non-critical
* overtemp conditions so userland can take some policy
- * decisions, like slewing down CPUs
+ * decisions, like slowing down CPUs
* - Deal with fan and i2c failures in a better way
* - Maybe do a generic PID based on params used for
* U3 and Drives ? Definitely need to factor code a bit
- * bettter... also make sensor detection more robust using
+ * better... also make sensor detection more robust using
* the device-tree to probe for them
* - Figure out how to get the slots consumption and set the
* slots fan accordingly
diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c
index 34dd54539f7b..346e69bfdab3 100644
--- a/drivers/md/raid5.c
+++ b/drivers/md/raid5.c
@@ -3958,7 +3958,7 @@ static int make_request(mddev_t *mddev, struct bio * bi)
/* spinlock is needed as reshape_progress may be
* 64bit on a 32bit platform, and so it might be
* possible to see a half-updated value
- * Ofcourse reshape_progress could change after
+ * Of course reshape_progress could change after
* the lock is dropped, so once we get a reference
* to the stripe that we think it is, we will have
* to check again.
diff --git a/drivers/media/dvb/dvb-usb/dw2102.c b/drivers/media/dvb/dvb-usb/dw2102.c
index f5b9da18f611..d312323504a4 100644
--- a/drivers/media/dvb/dvb-usb/dw2102.c
+++ b/drivers/media/dvb/dvb-usb/dw2102.c
@@ -1377,7 +1377,7 @@ static struct rc_map_table rc_map_su3000_table[] = {
{ 0x0f, KEY_BLUE }, /* bottom yellow button */
{ 0x14, KEY_AUDIO }, /* Snapshot */
{ 0x38, KEY_TV }, /* TV/Radio */
- { 0x0c, KEY_ESC } /* upper Red buttton */
+ { 0x0c, KEY_ESC } /* upper Red button */
};
static struct rc_map_dvb_usb_table_table keys_tables[] = {
diff --git a/drivers/media/video/msp3400-driver.c b/drivers/media/video/msp3400-driver.c
index 8126622fb4f5..de5d481b0328 100644
--- a/drivers/media/video/msp3400-driver.c
+++ b/drivers/media/video/msp3400-driver.c
@@ -96,7 +96,7 @@ MODULE_PARM_DESC(debug, "Enable debug messages [0-3]");
MODULE_PARM_DESC(stereo_threshold, "Sets signal threshold to activate stereo");
MODULE_PARM_DESC(standard, "Specify audio standard: 32 = NTSC, 64 = radio, Default: Autodetect");
MODULE_PARM_DESC(amsound, "Hardwire AM sound at 6.5Hz (France), FM can autoscan");
-MODULE_PARM_DESC(dolby, "Activates Dolby processsing");
+MODULE_PARM_DESC(dolby, "Activates Dolby processing");
/* ---------------------------------------------------------------------- */
diff --git a/drivers/media/video/saa7164/saa7164-encoder.c b/drivers/media/video/saa7164/saa7164-encoder.c
index f9d594698832..400364569c8d 100644
--- a/drivers/media/video/saa7164/saa7164-encoder.c
+++ b/drivers/media/video/saa7164/saa7164-encoder.c
@@ -177,7 +177,7 @@ static int saa7164_encoder_buffers_alloc(struct saa7164_port *port)
}
}
- /* Allocate some kenrel kernel buffers for copying
+ /* Allocate some kernel buffers for copying
* to userpsace.
*/
len = params->numberoflines * params->pitch;
diff --git a/drivers/media/video/saa7164/saa7164-vbi.c b/drivers/media/video/saa7164/saa7164-vbi.c
index 9e5b01c29cf5..bc1fcedba874 100644
--- a/drivers/media/video/saa7164/saa7164-vbi.c
+++ b/drivers/media/video/saa7164/saa7164-vbi.c
@@ -148,7 +148,7 @@ static int saa7164_vbi_buffers_alloc(struct saa7164_port *port)
}
}
- /* Allocate some kenrel kernel buffers for copying
+ /* Allocate some kernel buffers for copying
* to userpsace.
*/
len = params->numberoflines * params->pitch;
diff --git a/drivers/media/video/usbvision/usbvision-video.c b/drivers/media/video/usbvision/usbvision-video.c
index 6083137f0bf8..9855fbe5927a 100644
--- a/drivers/media/video/usbvision/usbvision-video.c
+++ b/drivers/media/video/usbvision/usbvision-video.c
@@ -70,8 +70,9 @@
#include "usbvision.h"
#include "usbvision-cards.h"
-#define DRIVER_AUTHOR "Joerg Heckenbach <joerg@heckenbach-aw.de>, \
-Dwaine Garden <DwaineGarden@rogers.com>"
+#define DRIVER_AUTHOR \
+ "Joerg Heckenbach <joerg@heckenbach-aw.de>, " \
+ "Dwaine Garden <DwaineGarden@rogers.com>"
#define DRIVER_NAME "usbvision"
#define DRIVER_ALIAS "USBVision"
#define DRIVER_DESC "USBVision USB Video Device Driver for Linux"
diff --git a/drivers/message/fusion/mptbase.c b/drivers/message/fusion/mptbase.c
index fa15e853d4e8..7956a10f9488 100644
--- a/drivers/message/fusion/mptbase.c
+++ b/drivers/message/fusion/mptbase.c
@@ -83,19 +83,18 @@ MODULE_VERSION(my_VERSION);
static int mpt_msi_enable_spi;
module_param(mpt_msi_enable_spi, int, 0);
-MODULE_PARM_DESC(mpt_msi_enable_spi, " Enable MSI Support for SPI \
- controllers (default=0)");
+MODULE_PARM_DESC(mpt_msi_enable_spi,
+ " Enable MSI Support for SPI controllers (default=0)");
static int mpt_msi_enable_fc;
module_param(mpt_msi_enable_fc, int, 0);
-MODULE_PARM_DESC(mpt_msi_enable_fc, " Enable MSI Support for FC \
- controllers (default=0)");
+MODULE_PARM_DESC(mpt_msi_enable_fc,
+ " Enable MSI Support for FC controllers (default=0)");
static int mpt_msi_enable_sas;
module_param(mpt_msi_enable_sas, int, 0);
-MODULE_PARM_DESC(mpt_msi_enable_sas, " Enable MSI Support for SAS \
- controllers (default=0)");
-
+MODULE_PARM_DESC(mpt_msi_enable_sas,
+ " Enable MSI Support for SAS controllers (default=0)");
static int mpt_channel_mapping;
module_param(mpt_channel_mapping, int, 0);
@@ -105,15 +104,14 @@ static int mpt_debug_level;
static int mpt_set_debug_level(const char *val, struct kernel_param *kp);
module_param_call(mpt_debug_level, mpt_set_debug_level, param_get_int,
&mpt_debug_level, 0600);
-MODULE_PARM_DESC(mpt_debug_level, " debug level - refer to mptdebug.h \
- - (default=0)");
+MODULE_PARM_DESC(mpt_debug_level,
+ " debug level - refer to mptdebug.h - (default=0)");
int mpt_fwfault_debug;
EXPORT_SYMBOL(mpt_fwfault_debug);
module_param(mpt_fwfault_debug, int, 0600);
-MODULE_PARM_DESC(mpt_fwfault_debug, "Enable detection of Firmware fault"
- " and halt Firmware on fault - (default=0)");
-
+MODULE_PARM_DESC(mpt_fwfault_debug,
+ "Enable detection of Firmware fault and halt Firmware on fault - (default=0)");
static char MptCallbacksName[MPT_MAX_PROTOCOL_DRIVERS][50];
diff --git a/drivers/message/i2o/README.ioctl b/drivers/message/i2o/README.ioctl
index 65c0c47aeb79..5fb195af43e2 100644
--- a/drivers/message/i2o/README.ioctl
+++ b/drivers/message/i2o/README.ioctl
@@ -110,7 +110,7 @@ V. Getting Logical Configuration Table
ENOBUFS Buffer not large enough. If this occurs, the required
buffer length is written into *(lct->reslen)
-VI. Settting Parameters
+VI. Setting Parameters
SYNOPSIS
diff --git a/drivers/misc/bh1780gli.c b/drivers/misc/bh1780gli.c
index d07cd67c951c..82fe2d067827 100644
--- a/drivers/misc/bh1780gli.c
+++ b/drivers/misc/bh1780gli.c
@@ -49,8 +49,8 @@ static int bh1780_write(struct bh1780_data *ddata, u8 reg, u8 val, char *msg)
int ret = i2c_smbus_write_byte_data(ddata->client, reg, val);
if (ret < 0)
dev_err(&ddata->client->dev,
- "i2c_smbus_write_byte_data failed error %d\
- Register (%s)\n", ret, msg);
+ "i2c_smbus_write_byte_data failed error %d Register (%s)\n",
+ ret, msg);
return ret;
}
@@ -59,8 +59,8 @@ static int bh1780_read(struct bh1780_data *ddata, u8 reg, char *msg)
int ret = i2c_smbus_read_byte_data(ddata->client, reg);
if (ret < 0)
dev_err(&ddata->client->dev,
- "i2c_smbus_read_byte_data failed error %d\
- Register (%s)\n", ret, msg);
+ "i2c_smbus_read_byte_data failed error %d Register (%s)\n",
+ ret, msg);
return ret;
}
diff --git a/drivers/misc/cs5535-mfgpt.c b/drivers/misc/cs5535-mfgpt.c
index d02d302ee6d5..e01e08c8c88b 100644
--- a/drivers/misc/cs5535-mfgpt.c
+++ b/drivers/misc/cs5535-mfgpt.c
@@ -329,7 +329,7 @@ done:
return err;
}
-static struct platform_driver cs5535_mfgpt_drv = {
+static struct platform_driver cs5535_mfgpt_driver = {
.driver = {
.name = DRV_NAME,
.owner = THIS_MODULE,
@@ -340,7 +340,7 @@ static struct platform_driver cs5535_mfgpt_drv = {
static int __init cs5535_mfgpt_init(void)
{
- return platform_driver_register(&cs5535_mfgpt_drv);
+ return platform_driver_register(&cs5535_mfgpt_driver);
}
module_init(cs5535_mfgpt_init);
diff --git a/drivers/misc/ibmasm/ibmasmfs.c b/drivers/misc/ibmasm/ibmasmfs.c
index d2d5d23416dd..89947723a27d 100644
--- a/drivers/misc/ibmasm/ibmasmfs.c
+++ b/drivers/misc/ibmasm/ibmasmfs.c
@@ -29,7 +29,7 @@
/*
* The IBMASM file virtual filesystem. It creates the following hierarchy
- * dymamically when mounted from user space:
+ * dynamically when mounted from user space:
*
* /ibmasm
* |-- 0
diff --git a/drivers/misc/spear13xx_pcie_gadget.c b/drivers/misc/spear13xx_pcie_gadget.c
index ec3b8c911833..7aded90f9daa 100644
--- a/drivers/misc/spear13xx_pcie_gadget.c
+++ b/drivers/misc/spear13xx_pcie_gadget.c
@@ -787,8 +787,8 @@ static int __devinit spear_pcie_gadget_probe(struct platform_device *pdev)
status = request_irq(irq, spear_pcie_gadget_irq, 0, pdev->name, NULL);
if (status) {
- dev_err(&pdev->dev, "pcie gadget interrupt IRQ%d already \
- claimed\n", irq);
+ dev_err(&pdev->dev,
+ "pcie gadget interrupt IRQ%d already claimed\n", irq);
goto err_iounmap;
}
diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c
index ea3888b65d5d..aa8039f473c4 100644
--- a/drivers/mmc/host/atmel-mci.c
+++ b/drivers/mmc/host/atmel-mci.c
@@ -1899,5 +1899,5 @@ late_initcall(atmci_init); /* try to load after dma driver when built-in */
module_exit(atmci_exit);
MODULE_DESCRIPTION("Atmel Multimedia Card Interface driver");
-MODULE_AUTHOR("Haavard Skinnemoen <haavard.skinnemoen@atmel.com>");
+MODULE_AUTHOR("Haavard Skinnemoen (Atmel)");
MODULE_LICENSE("GPL v2");
diff --git a/drivers/net/atlx/atl1.c b/drivers/net/atlx/atl1.c
index c5298d1ab744..cd5789ff3726 100644
--- a/drivers/net/atlx/atl1.c
+++ b/drivers/net/atlx/atl1.c
@@ -83,8 +83,9 @@
#include "atl1.h"
#define ATLX_DRIVER_VERSION "2.1.3"
-MODULE_AUTHOR("Xiong Huang <xiong.huang@atheros.com>, \
-Chris Snook <csnook@redhat.com>, Jay Cliburn <jcliburn@gmail.com>");
+MODULE_AUTHOR("Xiong Huang <xiong.huang@atheros.com>, "
+ "Chris Snook <csnook@redhat.com>, "
+ "Jay Cliburn <jcliburn@gmail.com>");
MODULE_LICENSE("GPL");
MODULE_VERSION(ATLX_DRIVER_VERSION);
diff --git a/drivers/net/can/pch_can.c b/drivers/net/can/pch_can.c
index e54712b22c27..d11fbb2b95ff 100644
--- a/drivers/net/can/pch_can.c
+++ b/drivers/net/can/pch_can.c
@@ -653,7 +653,7 @@ static int pch_can_rx_normal(struct net_device *ndev, u32 obj_num, int quota)
u16 data_reg;
do {
- /* Reading the messsage object from the Message RAM */
+ /* Reading the message object from the Message RAM */
iowrite32(PCH_CMASK_RX_TX_GET, &priv->regs->ifregs[0].cmask);
pch_can_rw_msg_obj(&priv->regs->ifregs[0].creq, obj_num);
diff --git a/drivers/net/can/softing/softing_main.c b/drivers/net/can/softing/softing_main.c
index 7a70709d5608..60a49e5a2a53 100644
--- a/drivers/net/can/softing/softing_main.c
+++ b/drivers/net/can/softing/softing_main.c
@@ -797,7 +797,7 @@ static __devinit int softing_pdev_probe(struct platform_device *pdev)
ret = -EINVAL;
pres = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!pres)
- goto platform_resource_failed;;
+ goto platform_resource_failed;
card->dpram_phys = pres->start;
card->dpram_size = pres->end - pres->start + 1;
card->dpram = ioremap_nocache(card->dpram_phys, card->dpram_size);
diff --git a/drivers/net/irda/ali-ircc.c b/drivers/net/irda/ali-ircc.c
index 872183f29ec4..d532dde5120f 100644
--- a/drivers/net/irda/ali-ircc.c
+++ b/drivers/net/irda/ali-ircc.c
@@ -1800,7 +1800,7 @@ static int ali_ircc_dma_receive_complete(struct ali_ircc_cb *self)
MessageCount = inb(iobase+ FIR_LSR)&0x07;
if (MessageCount > 0)
- IRDA_DEBUG(0, "%s(), Messsage count = %d,\n", __func__ , MessageCount);
+ IRDA_DEBUG(0, "%s(), Message count = %d,\n", __func__ , MessageCount);
for (i=0; i<=MessageCount; i++)
{
diff --git a/drivers/net/macb.c b/drivers/net/macb.c
index 629bd2649c0c..6c6a02869dfc 100644
--- a/drivers/net/macb.c
+++ b/drivers/net/macb.c
@@ -1356,5 +1356,5 @@ module_exit(macb_exit);
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("Atmel MACB Ethernet driver");
-MODULE_AUTHOR("Haavard Skinnemoen <hskinnemoen@atmel.com>");
+MODULE_AUTHOR("Haavard Skinnemoen (Atmel)");
MODULE_ALIAS("platform:macb");
diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c
index a9a5f5ed19c6..df0d2c8ecc09 100644
--- a/drivers/net/s2io.c
+++ b/drivers/net/s2io.c
@@ -7163,7 +7163,7 @@ static void do_s2io_card_down(struct s2io_nic *sp, int do_io)
/* As per the HW requirement we need to replenish the
* receive buffer to avoid the ring bump. Since there is
* no intention of processing the Rx frame at this pointwe are
- * just settting the ownership bit of rxd in Each Rx
+ * just setting the ownership bit of rxd in Each Rx
* ring to HW and set the appropriate buffer size
* based on the ring mode
*/
diff --git a/drivers/net/sgiseeq.c b/drivers/net/sgiseeq.c
index dd03bf619988..54415c7b84a2 100644
--- a/drivers/net/sgiseeq.c
+++ b/drivers/net/sgiseeq.c
@@ -1,7 +1,7 @@
/*
* sgiseeq.c: Seeq8003 ethernet driver for SGI machines.
*
- * Copyright (C) 1996 David S. Miller (dm@engr.sgi.com)
+ * Copyright (C) 1996 David S. Miller (davem@davemloft.net)
*/
#undef DEBUG
diff --git a/drivers/net/sgiseeq.h b/drivers/net/sgiseeq.h
index 523104de6830..2211e2987a8d 100644
--- a/drivers/net/sgiseeq.h
+++ b/drivers/net/sgiseeq.h
@@ -1,7 +1,7 @@
/*
* sgiseeq.h: Defines for the Seeq8003 ethernet controller.
*
- * Copyright (C) 1996 David S. Miller (dm@engr.sgi.com)
+ * Copyright (C) 1996 David S. Miller (davem@davemloft.net)
*/
#ifndef _SGISEEQ_H
#define _SGISEEQ_H
diff --git a/drivers/net/ucc_geth_ethtool.c b/drivers/net/ucc_geth_ethtool.c
index 537fbc0a4401..a97257f91a3d 100644
--- a/drivers/net/ucc_geth_ethtool.c
+++ b/drivers/net/ucc_geth_ethtool.c
@@ -6,7 +6,7 @@
* Author: Li Yang <leoli@freescale.com>
*
* Limitation:
- * Can only get/set setttings of the first queue.
+ * Can only get/set settings of the first queue.
* Need to re-open the interface manually after changing some parameters.
*
* This program is free software; you can redistribute it and/or modify it
diff --git a/drivers/net/usb/usbnet.c b/drivers/net/usb/usbnet.c
index e6dd24466965..ce395fe5de26 100644
--- a/drivers/net/usb/usbnet.c
+++ b/drivers/net/usb/usbnet.c
@@ -109,7 +109,7 @@ int usbnet_get_endpoints(struct usbnet *dev, struct usb_interface *intf)
/* take the first altsetting with in-bulk + out-bulk;
* remember any status endpoint, just in case;
- * ignore other endpoints and altsetttings.
+ * ignore other endpoints and altsettings.
*/
for (ep = 0; ep < alt->desc.bNumEndpoints; ep++) {
struct usb_host_endpoint *e;
diff --git a/drivers/net/wan/pc300_drv.c b/drivers/net/wan/pc300_drv.c
index f875cfae3093..737b59f1a8dc 100644
--- a/drivers/net/wan/pc300_drv.c
+++ b/drivers/net/wan/pc300_drv.c
@@ -1445,7 +1445,7 @@ static void falc_update_stats(pc300_t * card, int ch)
* Description: In the remote loopback mode the clock and data recovered
* from the line inputs RL1/2 or RDIP/RDIN are routed back
* to the line outputs XL1/2 or XDOP/XDON via the analog
- * transmitter. As in normal mode they are processsed by
+ * transmitter. As in normal mode they are processed by
* the synchronizer and then sent to the system interface.
*----------------------------------------------------------------------------
*/
diff --git a/drivers/net/wireless/airo.c b/drivers/net/wireless/airo.c
index 4e5c7a11f04a..a70c512f05d2 100644
--- a/drivers/net/wireless/airo.c
+++ b/drivers/net/wireless/airo.c
@@ -242,9 +242,8 @@ static int airo_perm = 0555;
static int proc_perm = 0644;
MODULE_AUTHOR("Benjamin Reed");
-MODULE_DESCRIPTION("Support for Cisco/Aironet 802.11 wireless ethernet \
-cards. Direct support for ISA/PCI/MPI cards and support \
-for PCMCIA when used with airo_cs.");
+MODULE_DESCRIPTION("Support for Cisco/Aironet 802.11 wireless ethernet cards. "
+ "Direct support for ISA/PCI/MPI cards and support for PCMCIA when used with airo_cs.");
MODULE_LICENSE("Dual BSD/GPL");
MODULE_SUPPORTED_DEVICE("Aironet 4500, 4800 and Cisco 340/350");
module_param_array(io, int, NULL, 0);
@@ -252,18 +251,20 @@ module_param_array(irq, int, NULL, 0);
module_param_array(rates, int, NULL, 0);
module_param_array(ssids, charp, NULL, 0);
module_param(auto_wep, int, 0);
-MODULE_PARM_DESC(auto_wep, "If non-zero, the driver will keep looping through \
-the authentication options until an association is made. The value of \
-auto_wep is number of the wep keys to check. A value of 2 will try using \
-the key at index 0 and index 1.");
+MODULE_PARM_DESC(auto_wep,
+ "If non-zero, the driver will keep looping through the authentication options until an association is made. "
+ "The value of auto_wep is number of the wep keys to check. "
+ "A value of 2 will try using the key at index 0 and index 1.");
module_param(aux_bap, int, 0);
-MODULE_PARM_DESC(aux_bap, "If non-zero, the driver will switch into a mode \
-than seems to work better for older cards with some older buses. Before \
-switching it checks that the switch is needed.");
+MODULE_PARM_DESC(aux_bap,
+ "If non-zero, the driver will switch into a mode that seems to work better for older cards with some older buses. "
+ "Before switching it checks that the switch is needed.");
module_param(maxencrypt, int, 0);
-MODULE_PARM_DESC(maxencrypt, "The maximum speed that the card can do \
-encryption. Units are in 512kbs. Zero (default) means there is no limit. \
-Older cards used to be limited to 2mbs (4).");
+MODULE_PARM_DESC(maxencrypt,
+ "The maximum speed that the card can do encryption. "
+ "Units are in 512kbs. "
+ "Zero (default) means there is no limit. "
+ "Older cards used to be limited to 2mbs (4).");
module_param(adhoc, int, 0);
MODULE_PARM_DESC(adhoc, "If non-zero, the card will start in adhoc mode.");
module_param(probe, int, 0);
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
index 1e220354e4be..d985841ff401 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
@@ -3327,26 +3327,26 @@ static int ar9300_eeprom_restore_internal(struct ath_hw *ah,
else
cptr = AR9300_BASE_ADDR;
ath_dbg(common, ATH_DBG_EEPROM,
- "Trying EEPROM accesss at Address 0x%04x\n", cptr);
+ "Trying EEPROM access at Address 0x%04x\n", cptr);
if (ar9300_check_eeprom_header(ah, read, cptr))
goto found;
cptr = AR9300_BASE_ADDR_512;
ath_dbg(common, ATH_DBG_EEPROM,
- "Trying EEPROM accesss at Address 0x%04x\n", cptr);
+ "Trying EEPROM access at Address 0x%04x\n", cptr);
if (ar9300_check_eeprom_header(ah, read, cptr))
goto found;
read = ar9300_read_otp;
cptr = AR9300_BASE_ADDR;
ath_dbg(common, ATH_DBG_EEPROM,
- "Trying OTP accesss at Address 0x%04x\n", cptr);
+ "Trying OTP access at Address 0x%04x\n", cptr);
if (ar9300_check_eeprom_header(ah, read, cptr))
goto found;
cptr = AR9300_BASE_ADDR_512;
ath_dbg(common, ATH_DBG_EEPROM,
- "Trying OTP accesss at Address 0x%04x\n", cptr);
+ "Trying OTP access at Address 0x%04x\n", cptr);
if (ar9300_check_eeprom_header(ah, read, cptr))
goto found;
diff --git a/drivers/net/wireless/b43/b43.h b/drivers/net/wireless/b43/b43.h
index 229f4388f790..ebc93c1bb5e7 100644
--- a/drivers/net/wireless/b43/b43.h
+++ b/drivers/net/wireless/b43/b43.h
@@ -648,8 +648,8 @@ struct b43_request_fw_context {
char errors[B43_NR_FWTYPES][128];
/* Temporary buffer for storing the firmware name. */
char fwname[64];
- /* A fatal error occurred while requesting. Firmware reqest
- * can not continue, as any other reqest will also fail. */
+ /* A fatal error occurred while requesting. Firmware request
+ * can not continue, as any other request will also fail. */
int fatal_failure;
};
diff --git a/drivers/net/wireless/ipw2x00/ipw2200.c b/drivers/net/wireless/ipw2x00/ipw2200.c
index 42c3fe37af64..87813c33bdc2 100644
--- a/drivers/net/wireless/ipw2x00/ipw2200.c
+++ b/drivers/net/wireless/ipw2x00/ipw2200.c
@@ -7430,7 +7430,7 @@ static int ipw_associate_network(struct ipw_priv *priv,
priv->assoc_request.capability &=
~cpu_to_le16(WLAN_CAPABILITY_SHORT_SLOT_TIME);
- IPW_DEBUG_ASSOC("%sssocation attempt: '%s', channel %d, "
+ IPW_DEBUG_ASSOC("%ssociation attempt: '%s', channel %d, "
"802.11%c [%d], %s[:%s], enc=%s%s%s%c%c\n",
roaming ? "Rea" : "A",
print_ssid(ssid, priv->essid, priv->essid_len),
diff --git a/drivers/net/wireless/iwlegacy/iwl-4965-calib.c b/drivers/net/wireless/iwlegacy/iwl-4965-calib.c
index 81d6a25eb04f..162d877e6869 100644
--- a/drivers/net/wireless/iwlegacy/iwl-4965-calib.c
+++ b/drivers/net/wireless/iwlegacy/iwl-4965-calib.c
@@ -713,8 +713,8 @@ iwl4965_find_disconn_antenna(struct iwl_priv *priv, u32* average_sig,
iwl4965_find_first_chain(priv->cfg->valid_tx_ant);
data->disconn_array[first_chain] = 0;
active_chains |= BIT(first_chain);
- IWL_DEBUG_CALIB(priv, "All Tx chains are disconnected \
- W/A - declare %d as connected\n",
+ IWL_DEBUG_CALIB(priv,
+ "All Tx chains are disconnected W/A - declare %d as connected\n",
first_chain);
break;
}
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-calib.c b/drivers/net/wireless/iwlwifi/iwl-agn-calib.c
index 0f6bb9b2e642..39d1e47a0978 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn-calib.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn-calib.c
@@ -817,8 +817,8 @@ static void iwl_find_disconn_antenna(struct iwl_priv *priv, u32* average_sig,
find_first_chain(priv->cfg->valid_tx_ant);
data->disconn_array[first_chain] = 0;
active_chains |= BIT(first_chain);
- IWL_DEBUG_CALIB(priv, "All Tx chains are disconnected \
- W/A - declare %d as connected\n",
+ IWL_DEBUG_CALIB(priv,
+ "All Tx chains are disconnected W/A - declare %d as connected\n",
first_chain);
break;
}
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c
index 3ecc3198d9bf..08e3cae4fa5a 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn.c
@@ -1766,7 +1766,7 @@ static const char *desc_lookup(u32 num)
max = ARRAY_SIZE(advanced_lookup) - 1;
for (i = 0; i < max; i++) {
if (advanced_lookup[i].num == num)
- break;;
+ break;
}
return advanced_lookup[i].name;
}
diff --git a/drivers/net/wireless/rtlwifi/core.c b/drivers/net/wireless/rtlwifi/core.c
index fc89cd8c8320..d2ec2535aa3c 100644
--- a/drivers/net/wireless/rtlwifi/core.c
+++ b/drivers/net/wireless/rtlwifi/core.c
@@ -783,7 +783,7 @@ static void rtl_op_set_tsf(struct ieee80211_hw *hw, u64 tsf)
{
struct rtl_priv *rtlpriv = rtl_priv(hw);
struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
- u8 bibss = (mac->opmode == NL80211_IFTYPE_ADHOC) ? 1 : 0;;
+ u8 bibss = (mac->opmode == NL80211_IFTYPE_ADHOC) ? 1 : 0;
mac->tsf = tsf;
rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_CORRECT_TSF, (u8 *) (&bibss));
diff --git a/drivers/net/wireless/rtlwifi/rtl8192ce/hw.c b/drivers/net/wireless/rtlwifi/rtl8192ce/hw.c
index 4a56138eb33c..defb4370cf74 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192ce/hw.c
+++ b/drivers/net/wireless/rtlwifi/rtl8192ce/hw.c
@@ -697,7 +697,7 @@ static bool _rtl92ce_init_mac(struct ieee80211_hw *hw)
rtl_write_word(rtlpriv, REG_CR, 0x2ff);
if (_rtl92ce_llt_table_init(hw) == false)
- return false;;
+ return false;
rtl_write_dword(rtlpriv, REG_HISR, 0xffffffff);
rtl_write_byte(rtlpriv, REG_HISRE, 0xff);
@@ -754,7 +754,7 @@ static bool _rtl92ce_init_mac(struct ieee80211_hw *hw)
rtl_write_dword(rtlpriv, REG_MCUTST_1, 0x0);
- return true;;
+ return true;
}
static void _rtl92ce_hw_configure(struct ieee80211_hw *hw)
diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig
index 0485e394712a..485c09eef424 100644
--- a/drivers/platform/x86/Kconfig
+++ b/drivers/platform/x86/Kconfig
@@ -111,7 +111,7 @@ config DELL_WMI_AIO
All-In-One machines.
To compile this driver as a module, choose M here: the module will
- be called dell-wmi.
+ be called dell-wmi-aio.
config FUJITSU_LAPTOP
diff --git a/drivers/power/intel_mid_battery.c b/drivers/power/intel_mid_battery.c
index bce3a01da2f0..cffcb7c00b00 100644
--- a/drivers/power/intel_mid_battery.c
+++ b/drivers/power/intel_mid_battery.c
@@ -522,7 +522,7 @@ static int pmic_battery_set_charger(struct pmic_power_module_info *pbi,
if (retval) {
dev_warn(pbi->dev, "%s(): ipc pmic read failed\n",
__func__);
- return retval;;
+ return retval;
}
return 0;
diff --git a/drivers/regulator/max8998.c b/drivers/regulator/max8998.c
index 43410266f993..f57e9c42fdb4 100644
--- a/drivers/regulator/max8998.c
+++ b/drivers/regulator/max8998.c
@@ -405,8 +405,8 @@ static int max8998_set_voltage_buck(struct regulator_dev *rdev,
switch (buck) {
case MAX8998_BUCK1:
dev_dbg(max8998->dev,
- "BUCK1, i:%d, buck1_vol1:%d, buck1_vol2:%d\n\
- buck1_vol3:%d, buck1_vol4:%d\n",
+ "BUCK1, i:%d, buck1_vol1:%d, buck1_vol2:%d\n"
+ "buck1_vol3:%d, buck1_vol4:%d\n",
i, max8998->buck1_vol[0], max8998->buck1_vol[1],
max8998->buck1_vol[2], max8998->buck1_vol[3]);
diff --git a/drivers/regulator/mc13783-regulator.c b/drivers/regulator/mc13783-regulator.c
index 23249cb0a8bd..b8a00c7fa441 100644
--- a/drivers/regulator/mc13783-regulator.c
+++ b/drivers/regulator/mc13783-regulator.c
@@ -341,7 +341,7 @@ static int __devinit mc13783_regulator_probe(struct platform_device *pdev)
struct mc13783_regulator_init_data *init_data;
int i, ret;
- dev_dbg(&pdev->dev, "mc13783_regulator_probe id %d\n", pdev->id);
+ dev_dbg(&pdev->dev, "%s id %d\n", __func__, pdev->id);
priv = kzalloc(sizeof(*priv) +
pdata->num_regulators * sizeof(priv->regulators[0]),
diff --git a/drivers/scsi/aic7xxx/aicasm/aicasm_symbol.c b/drivers/scsi/aic7xxx/aicasm/aicasm_symbol.c
index 078ed600f47a..232aff1fe784 100644
--- a/drivers/scsi/aic7xxx/aicasm/aicasm_symbol.c
+++ b/drivers/scsi/aic7xxx/aicasm/aicasm_symbol.c
@@ -1,5 +1,5 @@
/*
- * Aic7xxx SCSI host adapter firmware asssembler symbol table implementation
+ * Aic7xxx SCSI host adapter firmware assembler symbol table implementation
*
* Copyright (c) 1997 Justin T. Gibbs.
* Copyright (c) 2002 Adaptec Inc.
diff --git a/drivers/scsi/aic7xxx/aicasm/aicasm_symbol.h b/drivers/scsi/aic7xxx/aicasm/aicasm_symbol.h
index 2ba73ae7c777..34bbcad7f83f 100644
--- a/drivers/scsi/aic7xxx/aicasm/aicasm_symbol.h
+++ b/drivers/scsi/aic7xxx/aicasm/aicasm_symbol.h
@@ -1,5 +1,5 @@
/*
- * Aic7xxx SCSI host adapter firmware asssembler symbol table definitions
+ * Aic7xxx SCSI host adapter firmware assembler symbol table definitions
*
* Copyright (c) 1997 Justin T. Gibbs.
* Copyright (c) 2002 Adaptec Inc.
diff --git a/drivers/scsi/be2iscsi/be_main.c b/drivers/scsi/be2iscsi/be_main.c
index cea9b275965c..94b9a07845d5 100644
--- a/drivers/scsi/be2iscsi/be_main.c
+++ b/drivers/scsi/be2iscsi/be_main.c
@@ -619,7 +619,7 @@ static void beiscsi_get_params(struct beiscsi_hba *phba)
+ BE2_NOPOUT_REQ));
phba->params.cxns_per_ctrl = phba->fw_config.iscsi_cid_count;
phba->params.asyncpdus_per_ctrl = phba->fw_config.iscsi_cid_count * 2;
- phba->params.icds_per_ctrl = phba->fw_config.iscsi_icd_count;;
+ phba->params.icds_per_ctrl = phba->fw_config.iscsi_icd_count;
phba->params.num_sge_per_io = BE2_SGE;
phba->params.defpdu_hdr_sz = BE2_DEFPDU_HDR_SZ;
phba->params.defpdu_data_sz = BE2_DEFPDU_DATA_SZ;
@@ -782,7 +782,7 @@ static irqreturn_t be_isr(int irq, void *dev_id)
int isr;
phba = dev_id;
- ctrl = &phba->ctrl;;
+ ctrl = &phba->ctrl;
isr = ioread32(ctrl->csr + CEV_ISR0_OFFSET +
(PCI_FUNC(ctrl->pdev->devfn) * CEV_ISR_SIZE));
if (!isr)
diff --git a/drivers/scsi/constants.c b/drivers/scsi/constants.c
index 60d2ef291646..450e011f981a 100644
--- a/drivers/scsi/constants.c
+++ b/drivers/scsi/constants.c
@@ -34,7 +34,7 @@
static const char * cdb_byte0_names[] = {
/* 00-03 */ "Test Unit Ready", "Rezero Unit/Rewind", NULL, "Request Sense",
/* 04-07 */ "Format Unit/Medium", "Read Block Limits", NULL,
- "Reasssign Blocks",
+ "Reassign Blocks",
/* 08-0d */ "Read(6)", NULL, "Write(6)", "Seek(6)", NULL, NULL,
/* 0e-12 */ NULL, "Read Reverse", "Write Filemarks", "Space", "Inquiry",
/* 13-16 */ "Verify(6)", "Recover Buffered Data", "Mode Select(6)",
diff --git a/drivers/scsi/esp_scsi.c b/drivers/scsi/esp_scsi.c
index 9a1af1d6071a..394ed9e79fd4 100644
--- a/drivers/scsi/esp_scsi.c
+++ b/drivers/scsi/esp_scsi.c
@@ -1058,7 +1058,7 @@ static struct esp_cmd_entry *esp_reconnect_with_tag(struct esp *esp,
esp->ops->send_dma_cmd(esp, esp->command_block_dma,
2, 2, 1, ESP_CMD_DMA | ESP_CMD_TI);
- /* ACK the msssage. */
+ /* ACK the message. */
scsi_esp_cmd(esp, ESP_CMD_MOK);
for (i = 0; i < ESP_RESELECT_TAG_LIMIT; i++) {
diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c
index 17d789325f40..8dcbf8fff673 100644
--- a/drivers/scsi/lpfc/lpfc_attr.c
+++ b/drivers/scsi/lpfc/lpfc_attr.c
@@ -4532,7 +4532,7 @@ lpfc_set_vport_symbolic_name(struct fc_vport *fc_vport)
*
* This function is called by the lpfc_get_cfgparam() routine to set the
* module lpfc_log_verbose into the @phba cfg_log_verbose for use with
- * log messsage according to the module's lpfc_log_verbose parameter setting
+ * log message according to the module's lpfc_log_verbose parameter setting
* before hba port or vport created.
**/
static void
diff --git a/drivers/scsi/lpfc/lpfc_bsg.c b/drivers/scsi/lpfc/lpfc_bsg.c
index 37e2a1272f86..853e5042f39c 100644
--- a/drivers/scsi/lpfc/lpfc_bsg.c
+++ b/drivers/scsi/lpfc/lpfc_bsg.c
@@ -598,7 +598,7 @@ lpfc_bsg_rport_els(struct fc_bsg_job *job)
dd_data->context_un.iocb.cmdiocbq = cmdiocbq;
dd_data->context_un.iocb.rspiocbq = rspiocbq;
dd_data->context_un.iocb.set_job = job;
- dd_data->context_un.iocb.bmp = NULL;;
+ dd_data->context_un.iocb.bmp = NULL;
dd_data->context_un.iocb.ndlp = ndlp;
if (phba->cfg_poll & DISABLE_FCP_RING_INT) {
diff --git a/drivers/scsi/lpfc/lpfc_hw.h b/drivers/scsi/lpfc/lpfc_hw.h
index 95f11ed79463..86b6f7e6686a 100644
--- a/drivers/scsi/lpfc/lpfc_hw.h
+++ b/drivers/scsi/lpfc/lpfc_hw.h
@@ -1002,7 +1002,7 @@ typedef struct _ELS_PKT { /* Structure is in Big Endian format */
#define SLI_MGMT_GRPL 0x102 /* Get registered Port list */
#define SLI_MGMT_GPAT 0x110 /* Get Port attributes */
#define SLI_MGMT_RHBA 0x200 /* Register HBA */
-#define SLI_MGMT_RHAT 0x201 /* Register HBA atttributes */
+#define SLI_MGMT_RHAT 0x201 /* Register HBA attributes */
#define SLI_MGMT_RPRT 0x210 /* Register Port */
#define SLI_MGMT_RPA 0x211 /* Register Port attributes */
#define SLI_MGMT_DHBA 0x300 /* De-register HBA */
diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c
index 837d272cb2d6..fd5835e1c039 100644
--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -3040,7 +3040,7 @@ lpfc_sli_sp_handle_rspiocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
list_add_tail(&rspiocbp->list, &(pring->iocb_continueq));
pring->iocb_continueq_cnt++;
- /* Now, determine whetehr the list is completed for processing */
+ /* Now, determine whether the list is completed for processing */
irsp = &rspiocbp->iocb;
if (irsp->ulpLe) {
/*
diff --git a/drivers/scsi/nsp32_debug.c b/drivers/scsi/nsp32_debug.c
index 2fb3fb58858d..58806f432a16 100644
--- a/drivers/scsi/nsp32_debug.c
+++ b/drivers/scsi/nsp32_debug.c
@@ -13,7 +13,7 @@ static const char unknown[] = "UNKNOWN";
static const char * group_0_commands[] = {
/* 00-03 */ "Test Unit Ready", "Rezero Unit", unknown, "Request Sense",
-/* 04-07 */ "Format Unit", "Read Block Limits", unknown, "Reasssign Blocks",
+/* 04-07 */ "Format Unit", "Read Block Limits", unknown, "Reassign Blocks",
/* 08-0d */ "Read (6)", unknown, "Write (6)", "Seek (6)", unknown, unknown,
/* 0e-12 */ unknown, "Read Reverse", "Write Filemarks", "Space", "Inquiry",
/* 13-16 */ unknown, "Recover Buffered Data", "Mode Select", "Reserve",
diff --git a/drivers/scsi/pcmcia/nsp_debug.c b/drivers/scsi/pcmcia/nsp_debug.c
index 3c6ef64fcbff..6aa7d269d3b3 100644
--- a/drivers/scsi/pcmcia/nsp_debug.c
+++ b/drivers/scsi/pcmcia/nsp_debug.c
@@ -15,7 +15,7 @@ static const char unknown[] = "UNKNOWN";
static const char * group_0_commands[] = {
/* 00-03 */ "Test Unit Ready", "Rezero Unit", unknown, "Request Sense",
-/* 04-07 */ "Format Unit", "Read Block Limits", unknown, "Reasssign Blocks",
+/* 04-07 */ "Format Unit", "Read Block Limits", unknown, "Reassign Blocks",
/* 08-0d */ "Read (6)", unknown, "Write (6)", "Seek (6)", unknown, unknown,
/* 0e-12 */ unknown, "Read Reverse", "Write Filemarks", "Space", "Inquiry",
/* 13-16 */ unknown, "Recover Buffered Data", "Mode Select", "Reserve",
diff --git a/drivers/scsi/pm8001/pm8001_init.c b/drivers/scsi/pm8001/pm8001_init.c
index 002360da01e3..172cefb6deb9 100644
--- a/drivers/scsi/pm8001/pm8001_init.c
+++ b/drivers/scsi/pm8001/pm8001_init.c
@@ -160,7 +160,7 @@ static void pm8001_free(struct pm8001_hba_info *pm8001_ha)
static void pm8001_tasklet(unsigned long opaque)
{
struct pm8001_hba_info *pm8001_ha;
- pm8001_ha = (struct pm8001_hba_info *)opaque;;
+ pm8001_ha = (struct pm8001_hba_info *)opaque;
if (unlikely(!pm8001_ha))
BUG_ON(1);
PM8001_CHIP_DISP->isr(pm8001_ha);
diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c
index 9c0f0e3389eb..1b60a95adb50 100644
--- a/drivers/scsi/qla2xxx/qla_isr.c
+++ b/drivers/scsi/qla2xxx/qla_isr.c
@@ -1060,7 +1060,7 @@ qla2x00_ct_entry(scsi_qla_host_t *vha, struct req_que *req,
}
DEBUG2(qla2x00_dump_buffer((uint8_t *)pkt, sizeof(*pkt)));
} else {
- bsg_job->reply->result = DID_OK << 16;;
+ bsg_job->reply->result = DID_OK << 16;
bsg_job->reply->reply_payload_rcv_len =
bsg_job->reply_payload.payload_len;
bsg_job->reply_len = 0;
@@ -1155,7 +1155,7 @@ qla24xx_els_ct_entry(scsi_qla_host_t *vha, struct req_que *req,
DEBUG2(qla2x00_dump_buffer((uint8_t *)pkt, sizeof(*pkt)));
}
else {
- bsg_job->reply->result = DID_OK << 16;;
+ bsg_job->reply->result = DID_OK << 16;
bsg_job->reply->reply_payload_rcv_len = bsg_job->reply_payload.payload_len;
bsg_job->reply_len = 0;
}
diff --git a/drivers/scsi/qla4xxx/ql4_mbx.c b/drivers/scsi/qla4xxx/ql4_mbx.c
index f9d81c8372c3..d78b58dc5011 100644
--- a/drivers/scsi/qla4xxx/ql4_mbx.c
+++ b/drivers/scsi/qla4xxx/ql4_mbx.c
@@ -19,7 +19,7 @@
* @mbx_cmd: data pointer for mailbox in registers.
* @mbx_sts: data pointer for mailbox out registers.
*
- * This routine isssue mailbox commands and waits for completion.
+ * This routine issue mailbox commands and waits for completion.
* If outCount is 0, this routine completes successfully WITHOUT waiting
* for the mailbox command to complete.
**/
diff --git a/drivers/scsi/sgiwd93.c b/drivers/scsi/sgiwd93.c
index fef0e3c75b16..3a9d85ca6047 100644
--- a/drivers/scsi/sgiwd93.c
+++ b/drivers/scsi/sgiwd93.c
@@ -3,7 +3,7 @@
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
- * Copyright (C) 1996 David S. Miller (dm@engr.sgi.com)
+ * Copyright (C) 1996 David S. Miller (davem@davemloft.net)
* Copyright (C) 1999 Andrew R. Baker (andrewb@uab.edu)
* Copyright (C) 2001 Florian Lohoff (flo@rfc822.org)
* Copyright (C) 2003, 07 Ralf Baechle (ralf@linux-mips.org)
diff --git a/drivers/spi/atmel_spi.c b/drivers/spi/atmel_spi.c
index 1a478bf88c9d..08711e9202ab 100644
--- a/drivers/spi/atmel_spi.c
+++ b/drivers/spi/atmel_spi.c
@@ -935,6 +935,6 @@ static void __exit atmel_spi_exit(void)
module_exit(atmel_spi_exit);
MODULE_DESCRIPTION("Atmel AT32/AT91 SPI Controller driver");
-MODULE_AUTHOR("Haavard Skinnemoen <hskinnemoen@atmel.com>");
+MODULE_AUTHOR("Haavard Skinnemoen (Atmel)");
MODULE_LICENSE("GPL");
MODULE_ALIAS("platform:atmel_spi");
diff --git a/drivers/target/target_core_alua.c b/drivers/target/target_core_alua.c
index 30cbb743d9ba..47abb42d9c36 100644
--- a/drivers/target/target_core_alua.c
+++ b/drivers/target/target_core_alua.c
@@ -1036,7 +1036,7 @@ core_alua_allocate_lu_gp(const char *name, int def_group)
lu_gp = kmem_cache_zalloc(t10_alua_lu_gp_cache, GFP_KERNEL);
if (!(lu_gp)) {
printk(KERN_ERR "Unable to allocate struct t10_alua_lu_gp\n");
- return ERR_PTR(-ENOMEM);;
+ return ERR_PTR(-ENOMEM);
}
INIT_LIST_HEAD(&lu_gp->lu_gp_list);
INIT_LIST_HEAD(&lu_gp->lu_gp_mem_list);
@@ -1044,7 +1044,7 @@ core_alua_allocate_lu_gp(const char *name, int def_group)
atomic_set(&lu_gp->lu_gp_ref_cnt, 0);
if (def_group) {
- lu_gp->lu_gp_id = se_global->alua_lu_gps_counter++;;
+ lu_gp->lu_gp_id = se_global->alua_lu_gps_counter++;
lu_gp->lu_gp_valid_id = 1;
se_global->alua_lu_gps_count++;
}
diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c
index 9583b23c9c84..b9d3501bdd91 100644
--- a/drivers/target/target_core_transport.c
+++ b/drivers/target/target_core_transport.c
@@ -2128,7 +2128,7 @@ static void transport_failure_reset_queue_depth(struct se_device *dev)
{
unsigned long flags;
- spin_lock_irqsave(&SE_HBA(dev)->hba_queue_lock, flags);;
+ spin_lock_irqsave(&SE_HBA(dev)->hba_queue_lock, flags);
atomic_inc(&dev->depth_left);
atomic_inc(&SE_HBA(dev)->left_queue_depth);
spin_unlock_irqrestore(&SE_HBA(dev)->hba_queue_lock, flags);
diff --git a/drivers/tty/n_gsm.c b/drivers/tty/n_gsm.c
index 74273e638c0d..77623b936538 100644
--- a/drivers/tty/n_gsm.c
+++ b/drivers/tty/n_gsm.c
@@ -2128,7 +2128,7 @@ static int gsmld_attach_gsm(struct tty_struct *tty, struct gsm_mux *gsm)
/**
* gsmld_detach_gsm - stop doing 0710 mux
- * @tty: tty atttached to the mux
+ * @tty: tty attached to the mux
* @gsm: mux
*
* Shutdown and then clean up the resources used by the line discipline
diff --git a/drivers/tty/serial/bfin_sport_uart.c b/drivers/tty/serial/bfin_sport_uart.c
index c3ec0a61d859..891d194ae754 100644
--- a/drivers/tty/serial/bfin_sport_uart.c
+++ b/drivers/tty/serial/bfin_sport_uart.c
@@ -296,8 +296,7 @@ static int sport_startup(struct uart_port *port)
IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING |
IRQF_DISABLED, "BFIN_SPORT_UART_CTS", up)) {
up->cts_pin = -1;
- dev_info(port->dev, "Unable to attach BlackFin UART \
- over SPORT CTS interrupt. So, disable it.\n");
+ dev_info(port->dev, "Unable to attach BlackFin UART over SPORT CTS interrupt. So, disable it.\n");
}
}
if (up->rts_pin >= 0)
diff --git a/drivers/tty/serial/mfd.c b/drivers/tty/serial/mfd.c
index c111f36f5d21..cab52f4a88b0 100644
--- a/drivers/tty/serial/mfd.c
+++ b/drivers/tty/serial/mfd.c
@@ -49,8 +49,8 @@
static int hsu_dma_enable;
module_param(hsu_dma_enable, int, 0);
-MODULE_PARM_DESC(hsu_dma_enable, "It is a bitmap to set working mode, if \
-bit[x] is 1, then port[x] will work in DMA mode, otherwise in PIO mode.");
+MODULE_PARM_DESC(hsu_dma_enable,
+ "It is a bitmap to set working mode, if bit[x] is 1, then port[x] will work in DMA mode, otherwise in PIO mode.");
struct hsu_dma_buffer {
u8 *buf;
diff --git a/drivers/tty/serial/mrst_max3110.c b/drivers/tty/serial/mrst_max3110.c
index 2f548af4e98a..1bd28450ca40 100644
--- a/drivers/tty/serial/mrst_max3110.c
+++ b/drivers/tty/serial/mrst_max3110.c
@@ -56,7 +56,7 @@ struct uart_max3110 {
wait_queue_head_t wq;
struct task_struct *main_thread;
struct task_struct *read_thread;
- struct mutex thread_mutex;;
+ struct mutex thread_mutex;
u32 baud;
u16 cur_conf;
diff --git a/drivers/tty/tty_ioctl.c b/drivers/tty/tty_ioctl.c
index 21574cb32343..620c971422b6 100644
--- a/drivers/tty/tty_ioctl.c
+++ b/drivers/tty/tty_ioctl.c
@@ -309,7 +309,7 @@ EXPORT_SYMBOL(tty_termios_input_baud_rate);
* @ospeed: output speed
*
* Encode the speeds set into the passed termios structure. This is
- * used as a library helper for drivers os that they can report back
+ * used as a library helper for drivers so that they can report back
* the actual speed selected when it differs from the speed requested
*
* For maximal back compatibility with legacy SYS5/POSIX *nix behaviour
diff --git a/drivers/usb/gadget/atmel_usba_udc.c b/drivers/usb/gadget/atmel_usba_udc.c
index e7c65a4408fb..db1a659702ba 100644
--- a/drivers/usb/gadget/atmel_usba_udc.c
+++ b/drivers/usb/gadget/atmel_usba_udc.c
@@ -2095,6 +2095,6 @@ static void __exit udc_exit(void)
module_exit(udc_exit);
MODULE_DESCRIPTION("Atmel USBA UDC driver");
-MODULE_AUTHOR("Haavard Skinnemoen <hskinnemoen@atmel.com>");
+MODULE_AUTHOR("Haavard Skinnemoen (Atmel)");
MODULE_LICENSE("GPL");
MODULE_ALIAS("platform:atmel_usba_udc");
diff --git a/drivers/usb/host/imx21-dbg.c b/drivers/usb/host/imx21-dbg.c
index 512f647448ca..6d7533427163 100644
--- a/drivers/usb/host/imx21-dbg.c
+++ b/drivers/usb/host/imx21-dbg.c
@@ -384,7 +384,7 @@ static void debug_isoc_show_one(struct seq_file *s,
seq_printf(s, "%s %d:\n"
"cc=0X%02X\n"
"scheduled frame %d (%d)\n"
- "submittted frame %d (%d)\n"
+ "submitted frame %d (%d)\n"
"completed frame %d (%d)\n"
"requested length=%d\n"
"completed length=%d\n\n",
diff --git a/drivers/usb/host/uhci-hcd.c b/drivers/usb/host/uhci-hcd.c
index 4f65b14e5e08..448b9d1f0e70 100644
--- a/drivers/usb/host/uhci-hcd.c
+++ b/drivers/usb/host/uhci-hcd.c
@@ -53,9 +53,10 @@
/*
* Version Information
*/
-#define DRIVER_AUTHOR "Linus 'Frodo Rabbit' Torvalds, Johannes Erdfelt, \
-Randy Dunlap, Georg Acher, Deti Fliegl, Thomas Sailer, Roman Weissgaerber, \
-Alan Stern"
+#define DRIVER_AUTHOR \
+ "Linus 'Frodo Rabbit' Torvalds, Johannes Erdfelt, " \
+ "Randy Dunlap, Georg Acher, Deti Fliegl, Thomas Sailer, " \
+ "Roman Weissgaerber, Alan Stern"
#define DRIVER_DESC "USB Universal Host Controller Interface driver"
/* for flakey hardware, ignore overcurrent indicators */
diff --git a/drivers/usb/misc/usbtest.c b/drivers/usb/misc/usbtest.c
index 388cc128072a..ff9a01f8d405 100644
--- a/drivers/usb/misc/usbtest.c
+++ b/drivers/usb/misc/usbtest.c
@@ -104,7 +104,7 @@ get_endpoints(struct usbtest_dev *dev, struct usb_interface *intf)
alt = intf->altsetting + tmp;
/* take the first altsetting with in-bulk + out-bulk;
- * ignore other endpoints and altsetttings.
+ * ignore other endpoints and altsettings.
*/
for (ep = 0; ep < alt->desc.bNumEndpoints; ep++) {
struct usb_host_endpoint *e;
diff --git a/drivers/usb/storage/ene_ub6250.c b/drivers/usb/storage/ene_ub6250.c
index 0e5aafda4537..31645afff5fc 100644
--- a/drivers/usb/storage/ene_ub6250.c
+++ b/drivers/usb/storage/ene_ub6250.c
@@ -715,8 +715,8 @@ static int ene_ub6250_probe(struct usb_interface *intf,
if (!(misc_reg03 & 0x01)) {
result = -ENODEV;
- printk(KERN_NOTICE "ums_eneub6250: The driver only supports SD\
- card. To use SM/MS card, please build driver/stagging/keucr\n");
+ printk(KERN_NOTICE "ums_eneub6250: The driver only supports SD card. "
+ "To use SM/MS card, please build driver/staging/keucr\n");
usb_stor_disconnect(intf);
}
diff --git a/drivers/video/backlight/ltv350qv.c b/drivers/video/backlight/ltv350qv.c
index dd0e84a9bd2f..cca43c06d3c8 100644
--- a/drivers/video/backlight/ltv350qv.c
+++ b/drivers/video/backlight/ltv350qv.c
@@ -333,7 +333,7 @@ static void __exit ltv350qv_exit(void)
module_init(ltv350qv_init);
module_exit(ltv350qv_exit);
-MODULE_AUTHOR("Haavard Skinnemoen <hskinnemoen@atmel.com>");
+MODULE_AUTHOR("Haavard Skinnemoen (Atmel)");
MODULE_DESCRIPTION("Samsung LTV350QV LCD Driver");
MODULE_LICENSE("GPL");
MODULE_ALIAS("spi:ltv350qv");
diff --git a/drivers/video/console/newport_con.c b/drivers/video/console/newport_con.c
index 3772433c49d1..93317b5b8740 100644
--- a/drivers/video/console/newport_con.c
+++ b/drivers/video/console/newport_con.c
@@ -6,7 +6,7 @@
*
* This driver is based on sgicons.c and cons_newport.
*
- * Copyright (C) 1996 David S. Miller (dm@engr.sgi.com)
+ * Copyright (C) 1996 David S. Miller (davem@davemloft.net)
* Copyright (C) 1997 Miguel de Icaza (miguel@nuclecu.unam.mx)
*/
#include <linux/init.h>
diff --git a/drivers/video/msm/mddi.c b/drivers/video/msm/mddi.c
index b66d86ac7cea..178b0720bd79 100644
--- a/drivers/video/msm/mddi.c
+++ b/drivers/video/msm/mddi.c
@@ -679,7 +679,7 @@ static int __devinit mddi_probe(struct platform_device *pdev)
printk(KERN_ERR "mddi: no associated mem resource!\n");
return -ENOMEM;
}
- mddi->base = ioremap(resource->start, resource->end - resource->start);
+ mddi->base = ioremap(resource->start, resource_size(resource));
if (!mddi->base) {
printk(KERN_ERR "mddi: failed to remap base!\n");
ret = -EINVAL;
diff --git a/drivers/video/mxsfb.c b/drivers/video/mxsfb.c
index 7d0284882984..0b2f2dd41416 100644
--- a/drivers/video/mxsfb.c
+++ b/drivers/video/mxsfb.c
@@ -401,7 +401,7 @@ static int mxsfb_set_par(struct fb_info *fb_info)
writel(CTRL1_FIFO_CLEAR, host->base + LCDC_CTRL1 + REG_SET);
ctrl = CTRL_BYPASS_COUNT | CTRL_MASTER |
- CTRL_SET_BUS_WIDTH(host->ld_intf_width);;
+ CTRL_SET_BUS_WIDTH(host->ld_intf_width);
switch (fb_info->var.bits_per_pixel) {
case 16:
diff --git a/drivers/watchdog/bcm63xx_wdt.c b/drivers/watchdog/bcm63xx_wdt.c
index 3c5045a206dd..5064e8317521 100644
--- a/drivers/watchdog/bcm63xx_wdt.c
+++ b/drivers/watchdog/bcm63xx_wdt.c
@@ -248,7 +248,7 @@ static int __devinit bcm63xx_wdt_probe(struct platform_device *pdev)
return -ENODEV;
}
- bcm63xx_wdt_device.regs = ioremap_nocache(r->start, r->end - r->start);
+ bcm63xx_wdt_device.regs = ioremap_nocache(r->start, resource_size(r));
if (!bcm63xx_wdt_device.regs) {
dev_err(&pdev->dev, "failed to remap I/O resources\n");
return -ENXIO;
diff --git a/drivers/xen/evtchn.c b/drivers/xen/evtchn.c
index ef11daf0cafe..dbc13e94b612 100644
--- a/drivers/xen/evtchn.c
+++ b/drivers/xen/evtchn.c
@@ -470,7 +470,7 @@ static int evtchn_open(struct inode *inode, struct file *filp)
filp->private_data = u;
- return nonseekable_open(inode, filp);;
+ return nonseekable_open(inode, filp);
}
static int evtchn_release(struct inode *inode, struct file *filp)
diff --git a/drivers/xen/swiotlb-xen.c b/drivers/xen/swiotlb-xen.c
index 54469c3eeacd..65ea21a97492 100644
--- a/drivers/xen/swiotlb-xen.c
+++ b/drivers/xen/swiotlb-xen.c
@@ -54,7 +54,7 @@ u64 start_dma_addr;
static dma_addr_t xen_phys_to_bus(phys_addr_t paddr)
{
- return phys_to_machine(XPADDR(paddr)).maddr;;
+ return phys_to_machine(XPADDR(paddr)).maddr;
}
static phys_addr_t xen_bus_to_phys(dma_addr_t baddr)