summaryrefslogtreecommitdiff
path: root/drivers
diff options
context:
space:
mode:
Diffstat (limited to 'drivers')
-rw-r--r--drivers/i2c/busses/Kconfig10
-rw-r--r--drivers/input/misc/Kconfig4
-rw-r--r--drivers/mfd/Kconfig4
-rw-r--r--drivers/misc/Kconfig4
-rw-r--r--drivers/mtd/maps/Kconfig10
-rw-r--r--drivers/net/Kconfig2
-rw-r--r--drivers/rtc/Kconfig2
-rw-r--r--drivers/serial/Kconfig6
-rw-r--r--drivers/usb/image/Kconfig2
-rw-r--r--drivers/usb/serial/Kconfig2
-rw-r--r--drivers/video/Kconfig6
-rw-r--r--drivers/video/console/Kconfig2
-rw-r--r--drivers/video/omap/Kconfig2
13 files changed, 28 insertions, 28 deletions
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index de95c75efb41..c466c6cfc2e5 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -278,7 +278,7 @@ config I2C_IXP2000
depends on ARCH_IXP2000
select I2C_ALGOBIT
help
- Say Y here if you have an Intel IXP2000(2400, 2800, 2850) based
+ Say Y here if you have an Intel IXP2000 (2400, 2800, 2850) based
system and are using GPIO lines for an I2C bus.
This support is also available as a module. If so, the module
@@ -293,8 +293,8 @@ config I2C_POWERMAC
default y
help
This exposes the various PowerMac i2c interfaces to the linux i2c
- layer and to userland. It is used by various drivers on the powemac
- platform, thus should generally be enabled.
+ layer and to userland. It is used by various drivers on the PowerMac
+ platform, and should generally be enabled.
This support is also available as a module. If so, the module
will be called i2c-powermac.
@@ -438,12 +438,12 @@ config I2C_SIMTEC
tristate "Simtec Generic I2C interface"
select I2C_ALGOBIT
help
- If you say yes to this option, support will be inclyded for
+ If you say yes to this option, support will be included for
the Simtec Generic I2C interface. This driver is for the
simple I2C bus used on newer Simtec products for general
I2C, such as DDC on the Simtec BBD2016A.
- This driver can also be build as a module. If so, the module
+ This driver can also be built as a module. If so, the module
will be called i2c-simtec.
config SCx200_I2C
diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
index 7acc6351bb44..8f5c7b90187d 100644
--- a/drivers/input/misc/Kconfig
+++ b/drivers/input/misc/Kconfig
@@ -70,9 +70,9 @@ config INPUT_WISTRON_BTNS
select LEDS_CLASS
select CHECK_SIGNATURE
help
- Say Y here for support of Winstron laptop button interface, used on
+ Say Y here for support of Wistron laptop button interfaces, used on
laptops of various brands, including Acer and Fujitsu-Siemens. If
- available, mail and wifi leds will be controlable via /sys/class/leds.
+ available, mail and wifi LEDs will be controllable via /sys/class/leds.
To compile this driver as a module, choose M here: the module will
be called wistron_btns.
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index a20a51efe118..25716193a534 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -10,8 +10,8 @@ config MFD_SM501
---help---
This is the core driver for the Silicon Motion SM501 multimedia
companion chip. This device is a multifunction device which may
- provide numerous interfaces including USB host controller USB gadget,
- Asyncronous Serial ports, Audio functions and a dual display video
+ provide numerous interfaces including USB host controller, USB gadget,
+ asynchronous serial ports, audio functions, and a dual display video
interface. The device may be connected by PCI or local bus with
varying functions enabled.
diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index cf02ddc3436f..b5e67c0ff433 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -180,7 +180,7 @@ config THINKPAD_ACPI
For more information about this driver see
<file:Documentation/thinkpad-acpi.txt> and <http://ibm-acpi.sf.net/> .
- This driver was formely known as ibm-acpi.
+ This driver was formerly known as ibm-acpi.
If you have an IBM or Lenovo ThinkPad laptop, say Y or M here.
@@ -214,7 +214,7 @@ config THINKPAD_ACPI_BAY
default y
---help---
Allows the thinkpad_acpi driver to handle removable bays. It will
- eletrically disable the device in the bay, and also generate
+ electrically disable the device in the bay, and also generate
notifications when the bay lever is ejected or inserted.
If you are not sure, say Y here.
diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig
index 2a2a125b0c76..a592fc04cf78 100644
--- a/drivers/mtd/maps/Kconfig
+++ b/drivers/mtd/maps/Kconfig
@@ -54,7 +54,7 @@ config MTD_PHYSMAP_BANKWIDTH
help
This is the total width of the data bus of the flash devices
in octets. For example, if you have a data bus width of 32
- bits, you would set the bus width octect value to 4. This is
+ bits, you would set the bus width octet value to 4. This is
used internally by the CFI drivers.
Ignore this option if you use run-time physmap configuration
(i.e., run-time calling physmap_configure()).
@@ -73,12 +73,12 @@ config MTD_PMC_MSP_EVM
depends on PMC_MSP && MTD_CFI
select MTD_PARTITIONS
help
- This provides a 'mapping' driver which support the way
- in which user-programmable flash chips are connected on the
- PMC-Sierra MSP eval/demo boards
+ This provides a 'mapping' driver which supports the way
+ in which user-programmable flash chips are connected on the
+ PMC-Sierra MSP eval/demo boards.
choice
- prompt "Maximum mappable memory avialable for flash IO"
+ prompt "Maximum mappable memory available for flash IO"
depends on MTD_PMC_MSP_EVM
default MSP_FLASH_MAP_LIMIT_32M
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 83d52c8acab0..fd9e8405fd77 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -855,7 +855,7 @@ config BFIN_MAC_USE_L1
depends on BFIN_MAC && BF537
default y
help
- To get maximum network performace, you should use L1 memory as rx/tx buffers.
+ To get maximum network performance, you should use L1 memory as rx/tx buffers.
Say N here if you want to reserve L1 memory for other uses.
config BFIN_TX_DESC_NUM
diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index 6420a90a4a92..cbde770eb121 100644
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -240,7 +240,7 @@ config RTC_DRV_TWL92330
depends on MENELAUS
help
If you say yes here you get support for the RTC on the
- TWL92330 "Menelaus" power mangement chip, used with OMAP2
+ TWL92330 "Menelaus" power management chip, used with OMAP2
platforms. The support is integrated with the rest of
the Menelaus driver; it's not separate module.
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index d6ae38e55d01..87665d7df6f2 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -62,11 +62,11 @@ config SERIAL_8250_CONSOLE
kernel will automatically use the first serial line, /dev/ttyS0, as
system console.
- you can set that using a kernel command line option such as
+ You can set that using a kernel command line option such as
"console=uart8250,io,0x3f8,9600n8"
"console=uart8250,mmio,0xff5e0000,115200n8".
- and it will switch to normal serial console when correponding port is
- ready.
+ and it will switch to normal serial console when the corresponding
+ port is ready.
"earlycon=uart8250,io,0x3f8,9600n8"
"earlycon=uart8250,mmio,0xff5e0000,115200n8".
it will not only setup early console.
diff --git a/drivers/usb/image/Kconfig b/drivers/usb/image/Kconfig
index 95ce703110d2..7595dfb38e3b 100644
--- a/drivers/usb/image/Kconfig
+++ b/drivers/usb/image/Kconfig
@@ -1,5 +1,5 @@
#
-# USB Imageing devices configuration
+# USB Imaging devices configuration
#
comment "USB Imaging devices"
depends on USB
diff --git a/drivers/usb/serial/Kconfig b/drivers/usb/serial/Kconfig
index 99fefed77919..4a86696e6c7d 100644
--- a/drivers/usb/serial/Kconfig
+++ b/drivers/usb/serial/Kconfig
@@ -527,7 +527,7 @@ config USB_SERIAL_CYBERJACK
depends on USB_SERIAL && EXPERIMENTAL
---help---
Say Y here if you want to use a cyberJack pinpad/e-com USB chipcard
- reader. This is an interface to ISO 7816 compatible contactbased
+ reader. This is an interface to ISO 7816 compatible contact-based
chipcards, e.g. GSM SIMs.
To compile this driver as a module, choose M here: the
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index b3bf4ecc983a..fb9d8d0b2c04 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -661,7 +661,7 @@ config FB_HECUBA
help
This enables support for the Hecuba board. This driver was tested
with an E-Ink 800x600 display and x86 SBCs through a 16 bit GPIO
- interface (8 bit data, 4 bit control). If you anticpate using
+ interface (8 bit data, 4 bit control). If you anticipate using
this driver, say Y or M; otherwise say N. You must specify the
GPIO IO address to be used for setting control and data.
@@ -815,7 +815,7 @@ config FB_XVR500
help
This is the framebuffer device for the Sun XVR-500 and similar
graphics cards based upon the 3DLABS Wildcat chipset. The driver
- only works on sparc64 systems where the system firwmare has
+ only works on sparc64 systems where the system firmware has
mostly initialized the card already. It is treated as a
completely dumb framebuffer device.
@@ -828,7 +828,7 @@ config FB_XVR2500
help
This is the framebuffer device for the Sun XVR-2500 and similar
graphics cards based upon the 3DLABS Wildcat chipset. The driver
- only works on sparc64 systems where the system firwmare has
+ only works on sparc64 systems where the system firmware has
mostly initialized the card already. It is treated as a
completely dumb framebuffer device.
diff --git a/drivers/video/console/Kconfig b/drivers/video/console/Kconfig
index a22ccf9485a4..267422f66255 100644
--- a/drivers/video/console/Kconfig
+++ b/drivers/video/console/Kconfig
@@ -27,7 +27,7 @@ config VGACON_SOFT_SCROLLBACK
The scrollback buffer of the standard VGA console is located in
the VGA RAM. The size of this RAM is fixed and is quite small.
If you require a larger scrollback buffer, this can be placed in
- System RAM which is dynamically allocated during intialization.
+ System RAM which is dynamically allocated during initialization.
Placing the scrollback buffer in System RAM will slightly slow
down the console.
diff --git a/drivers/video/omap/Kconfig b/drivers/video/omap/Kconfig
index 7f4d25b8a184..f4fcf11b290d 100644
--- a/drivers/video/omap/Kconfig
+++ b/drivers/video/omap/Kconfig
@@ -8,7 +8,7 @@ config FB_OMAP
Frame buffer driver for OMAP based boards.
config FB_OMAP_BOOTLOADER_INIT
- bool "Check bootloader initializaion"
+ bool "Check bootloader initialization"
depends on FB_OMAP
help
Say Y here if you want to enable checking if the bootloader has