summaryrefslogtreecommitdiff
path: root/drivers
diff options
context:
space:
mode:
Diffstat (limited to 'drivers')
-rw-r--r--drivers/hwmon/Kconfig13
-rw-r--r--drivers/hwmon/Makefile1
-rw-r--r--drivers/hwmon/ab8500.c206
-rw-r--r--drivers/hwmon/abx500.c491
-rw-r--r--drivers/hwmon/abx500.h69
-rw-r--r--drivers/mfd/ab8500-core.c544
-rw-r--r--drivers/mfd/ab8500-debugfs.c1741
-rw-r--r--drivers/mfd/ab8500-gpadc.c559
-rw-r--r--drivers/mfd/ab8500-sysctrl.c98
-rw-r--r--drivers/power/88pm860x_charger.c2
-rw-r--r--drivers/power/Kconfig14
-rw-r--r--drivers/power/Makefile4
-rw-r--r--drivers/power/ab8500_bmdata.c140
-rw-r--r--drivers/power/ab8500_btemp.c80
-rw-r--r--drivers/power/ab8500_charger.c699
-rw-r--r--drivers/power/ab8500_fg.c501
-rw-r--r--drivers/power/abx500_chargalg.c455
-rw-r--r--drivers/power/charger-manager.c3
-rw-r--r--drivers/power/da9030_battery.c6
-rw-r--r--drivers/power/da9052-battery.c5
-rw-r--r--drivers/power/ds2760_battery.c4
-rw-r--r--drivers/power/ds2780_battery.c7
-rw-r--r--drivers/power/ds2782_battery.c23
-rw-r--r--drivers/power/goldfish_battery.c2
-rw-r--r--drivers/power/gpio-charger.c5
-rw-r--r--drivers/power/isp1704_charger.c5
-rw-r--r--drivers/power/lp8788-charger.c8
-rw-r--r--drivers/power/max17040_battery.c20
-rw-r--r--drivers/power/max8903_charger.c4
-rw-r--r--drivers/power/max8925_power.c5
-rw-r--r--drivers/power/max8997_charger.c9
-rw-r--r--drivers/power/max8998_charger.c5
-rw-r--r--drivers/power/pcf50633-charger.c7
-rw-r--r--drivers/power/pm2301_charger.c391
-rw-r--r--drivers/power/pm2301_charger.h23
-rw-r--r--drivers/power/power_supply_core.c187
-rw-r--r--drivers/power/reset/Kconfig7
-rw-r--r--drivers/power/reset/Makefile3
-rw-r--r--drivers/power/reset/vexpress-poweroff.c146
-rw-r--r--drivers/power/rx51_battery.c8
-rw-r--r--drivers/power/s3c_adc_battery.c7
-rw-r--r--drivers/power/sbs-battery.c22
-rw-r--r--drivers/power/test_power.c31
-rw-r--r--drivers/power/tps65090-charger.c320
-rw-r--r--drivers/power/twl4030_charger.c12
-rw-r--r--drivers/power/wm831x_backup.c10
46 files changed, 5849 insertions, 1053 deletions
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index f61d98a62967..9c333d471433 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -39,6 +39,19 @@ config HWMON_DEBUG_CHIP
comment "Native drivers"
+config SENSORS_AB8500
+ tristate "AB8500 thermal monitoring"
+ depends on AB8500_GPADC && AB8500_BM
+ default n
+ help
+ If you say yes here you get support for the thermal sensor part
+ of the AB8500 chip. The driver includes thermal management for
+ AB8500 die and two GPADC channels. The GPADC channel are preferably
+ used to access sensors outside the AB8500 chip.
+
+ This driver can also be built as a module. If so, the module
+ will be called abx500-temp.
+
config SENSORS_ABITUGURU
tristate "Abit uGuru (rev 1 & 2)"
depends on X86 && DMI
diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
index c51b0dc35dc8..d17d3e64f9f4 100644
--- a/drivers/hwmon/Makefile
+++ b/drivers/hwmon/Makefile
@@ -19,6 +19,7 @@ obj-$(CONFIG_SENSORS_W83795) += w83795.o
obj-$(CONFIG_SENSORS_W83781D) += w83781d.o
obj-$(CONFIG_SENSORS_W83791D) += w83791d.o
+obj-$(CONFIG_SENSORS_AB8500) += abx500.o ab8500.o
obj-$(CONFIG_SENSORS_ABITUGURU) += abituguru.o
obj-$(CONFIG_SENSORS_ABITUGURU3)+= abituguru3.o
obj-$(CONFIG_SENSORS_AD7314) += ad7314.o
diff --git a/drivers/hwmon/ab8500.c b/drivers/hwmon/ab8500.c
new file mode 100644
index 000000000000..d844dc806853
--- /dev/null
+++ b/drivers/hwmon/ab8500.c
@@ -0,0 +1,206 @@
+/*
+ * Copyright (C) ST-Ericsson 2010 - 2013
+ * Author: Martin Persson <martin.persson@stericsson.com>
+ * Hongbo Zhang <hongbo.zhang@linaro.org>
+ * License Terms: GNU General Public License v2
+ *
+ * When the AB8500 thermal warning temperature is reached (threshold cannot
+ * be changed by SW), an interrupt is set, and if no further action is taken
+ * within a certain time frame, pm_power off will be called.
+ *
+ * When AB8500 thermal shutdown temperature is reached a hardware shutdown of
+ * the AB8500 will occur.
+ */
+
+#include <linux/err.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/mfd/abx500.h>
+#include <linux/mfd/abx500/ab8500-bm.h>
+#include <linux/mfd/abx500/ab8500-gpadc.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/power/ab8500.h>
+#include <linux/slab.h>
+#include <linux/sysfs.h>
+#include "abx500.h"
+
+#define DEFAULT_POWER_OFF_DELAY (HZ * 10)
+#define THERMAL_VCC 1800
+#define PULL_UP_RESISTOR 47000
+/* Number of monitored sensors should not greater than NUM_SENSORS */
+#define NUM_MONITORED_SENSORS 4
+
+struct ab8500_gpadc_cfg {
+ const struct abx500_res_to_temp *temp_tbl;
+ int tbl_sz;
+ int vcc;
+ int r_up;
+};
+
+struct ab8500_temp {
+ struct ab8500_gpadc *gpadc;
+ struct ab8500_btemp *btemp;
+ struct delayed_work power_off_work;
+ struct ab8500_gpadc_cfg cfg;
+ struct abx500_temp *abx500_data;
+};
+
+/*
+ * The hardware connection is like this:
+ * VCC----[ R_up ]-----[ NTC ]----GND
+ * where R_up is pull-up resistance, and GPADC measures voltage on NTC.
+ * and res_to_temp table is strictly sorted by falling resistance values.
+ */
+static int ab8500_voltage_to_temp(struct ab8500_gpadc_cfg *cfg,
+ int v_ntc, int *temp)
+{
+ int r_ntc, i = 0, tbl_sz = cfg->tbl_sz;
+ const struct abx500_res_to_temp *tbl = cfg->temp_tbl;
+
+ if (cfg->vcc < 0 || v_ntc >= cfg->vcc)
+ return -EINVAL;
+
+ r_ntc = v_ntc * cfg->r_up / (cfg->vcc - v_ntc);
+ if (r_ntc > tbl[0].resist || r_ntc < tbl[tbl_sz - 1].resist)
+ return -EINVAL;
+
+ while (!(r_ntc <= tbl[i].resist && r_ntc > tbl[i + 1].resist) &&
+ i < tbl_sz - 2)
+ i++;
+
+ /* return milli-Celsius */
+ *temp = tbl[i].temp * 1000 + ((tbl[i + 1].temp - tbl[i].temp) * 1000 *
+ (r_ntc - tbl[i].resist)) / (tbl[i + 1].resist - tbl[i].resist);
+
+ return 0;
+}
+
+static int ab8500_read_sensor(struct abx500_temp *data, u8 sensor, int *temp)
+{
+ int voltage, ret;
+ struct ab8500_temp *ab8500_data = data->plat_data;
+
+ if (sensor == BAT_CTRL) {
+ *temp = ab8500_btemp_get_batctrl_temp(ab8500_data->btemp);
+ } else if (sensor == BTEMP_BALL) {
+ *temp = ab8500_btemp_get_temp(ab8500_data->btemp);
+ } else {
+ voltage = ab8500_gpadc_convert(ab8500_data->gpadc, sensor);
+ if (voltage < 0)
+ return voltage;
+
+ ret = ab8500_voltage_to_temp(&ab8500_data->cfg, voltage, temp);
+ if (ret < 0)
+ return ret;
+ }
+
+ return 0;
+}
+
+static void ab8500_thermal_power_off(struct work_struct *work)
+{
+ struct ab8500_temp *ab8500_data = container_of(work,
+ struct ab8500_temp, power_off_work.work);
+ struct abx500_temp *abx500_data = ab8500_data->abx500_data;
+
+ dev_warn(&abx500_data->pdev->dev, "Power off due to critical temp\n");
+
+ pm_power_off();
+}
+
+static ssize_t ab8500_show_name(struct device *dev,
+ struct device_attribute *devattr, char *buf)
+{
+ return sprintf(buf, "ab8500\n");
+}
+
+static ssize_t ab8500_show_label(struct device *dev,
+ struct device_attribute *devattr, char *buf)
+{
+ char *label;
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ int index = attr->index;
+
+ switch (index) {
+ case 1:
+ label = "ext_adc1";
+ break;
+ case 2:
+ label = "ext_adc2";
+ break;
+ case 3:
+ label = "bat_temp";
+ break;
+ case 4:
+ label = "bat_ctrl";
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return sprintf(buf, "%s\n", label);
+}
+
+static int ab8500_temp_irq_handler(int irq, struct abx500_temp *data)
+{
+ struct ab8500_temp *ab8500_data = data->plat_data;
+
+ dev_warn(&data->pdev->dev, "Power off in %d s\n",
+ DEFAULT_POWER_OFF_DELAY / HZ);
+
+ schedule_delayed_work(&ab8500_data->power_off_work,
+ DEFAULT_POWER_OFF_DELAY);
+ return 0;
+}
+
+int abx500_hwmon_init(struct abx500_temp *data)
+{
+ struct ab8500_temp *ab8500_data;
+
+ ab8500_data = devm_kzalloc(&data->pdev->dev, sizeof(*ab8500_data),
+ GFP_KERNEL);
+ if (!ab8500_data)
+ return -ENOMEM;
+
+ ab8500_data->gpadc = ab8500_gpadc_get("ab8500-gpadc.0");
+ if (IS_ERR(ab8500_data->gpadc))
+ return PTR_ERR(ab8500_data->gpadc);
+
+ ab8500_data->btemp = ab8500_btemp_get();
+ if (IS_ERR(ab8500_data->btemp))
+ return PTR_ERR(ab8500_data->btemp);
+
+ INIT_DELAYED_WORK(&ab8500_data->power_off_work,
+ ab8500_thermal_power_off);
+
+ ab8500_data->cfg.vcc = THERMAL_VCC;
+ ab8500_data->cfg.r_up = PULL_UP_RESISTOR;
+ ab8500_data->cfg.temp_tbl = ab8500_temp_tbl_a_thermistor;
+ ab8500_data->cfg.tbl_sz = ab8500_temp_tbl_a_size;
+
+ data->plat_data = ab8500_data;
+
+ /*
+ * ADC_AUX1 and ADC_AUX2, connected to external NTC
+ * BTEMP_BALL and BAT_CTRL, fixed usage
+ */
+ data->gpadc_addr[0] = ADC_AUX1;
+ data->gpadc_addr[1] = ADC_AUX2;
+ data->gpadc_addr[2] = BTEMP_BALL;
+ data->gpadc_addr[3] = BAT_CTRL;
+ data->monitored_sensors = NUM_MONITORED_SENSORS;
+
+ data->ops.read_sensor = ab8500_read_sensor;
+ data->ops.irq_handler = ab8500_temp_irq_handler;
+ data->ops.show_name = ab8500_show_name;
+ data->ops.show_label = ab8500_show_label;
+ data->ops.is_visible = NULL;
+
+ return 0;
+}
+EXPORT_SYMBOL(abx500_hwmon_init);
+
+MODULE_AUTHOR("Hongbo Zhang <hongbo.zhang@linaro.org>");
+MODULE_DESCRIPTION("AB8500 temperature driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/hwmon/abx500.c b/drivers/hwmon/abx500.c
new file mode 100644
index 000000000000..b4ad87b31a37
--- /dev/null
+++ b/drivers/hwmon/abx500.c
@@ -0,0 +1,491 @@
+/*
+ * Copyright (C) ST-Ericsson 2010 - 2013
+ * Author: Martin Persson <martin.persson@stericsson.com>
+ * Hongbo Zhang <hongbo.zhang@linaro.org>
+ * License Terms: GNU General Public License v2
+ *
+ * ABX500 does not provide auto ADC, so to monitor the required temperatures,
+ * a periodic work is used. It is more important to not wake up the CPU than
+ * to perform this job, hence the use of a deferred delay.
+ *
+ * A deferred delay for thermal monitor is considered safe because:
+ * If the chip gets too hot during a sleep state it's most likely due to
+ * external factors, such as the surrounding temperature. I.e. no SW decisions
+ * will make any difference.
+ */
+
+#include <linux/err.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/interrupt.h>
+#include <linux/jiffies.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/pm.h>
+#include <linux/slab.h>
+#include <linux/sysfs.h>
+#include <linux/workqueue.h>
+#include "abx500.h"
+
+#define DEFAULT_MONITOR_DELAY HZ
+#define DEFAULT_MAX_TEMP 130
+
+static inline void schedule_monitor(struct abx500_temp *data)
+{
+ data->work_active = true;
+ schedule_delayed_work(&data->work, DEFAULT_MONITOR_DELAY);
+}
+
+static void threshold_updated(struct abx500_temp *data)
+{
+ int i;
+ for (i = 0; i < data->monitored_sensors; i++)
+ if (data->max[i] != 0 || data->min[i] != 0) {
+ schedule_monitor(data);
+ return;
+ }
+
+ dev_dbg(&data->pdev->dev, "No active thresholds.\n");
+ cancel_delayed_work_sync(&data->work);
+ data->work_active = false;
+}
+
+static void gpadc_monitor(struct work_struct *work)
+{
+ int temp, i, ret;
+ char alarm_node[30];
+ bool updated_min_alarm, updated_max_alarm;
+ struct abx500_temp *data;
+
+ data = container_of(work, struct abx500_temp, work.work);
+ mutex_lock(&data->lock);
+
+ for (i = 0; i < data->monitored_sensors; i++) {
+ /* Thresholds are considered inactive if set to 0 */
+ if (data->max[i] == 0 && data->min[i] == 0)
+ continue;
+
+ if (data->max[i] < data->min[i])
+ continue;
+
+ ret = data->ops.read_sensor(data, data->gpadc_addr[i], &temp);
+ if (ret < 0) {
+ dev_err(&data->pdev->dev, "GPADC read failed\n");
+ continue;
+ }
+
+ updated_min_alarm = false;
+ updated_max_alarm = false;
+
+ if (data->min[i] != 0) {
+ if (temp < data->min[i]) {
+ if (data->min_alarm[i] == false) {
+ data->min_alarm[i] = true;
+ updated_min_alarm = true;
+ }
+ } else {
+ if (data->min_alarm[i] == true) {
+ data->min_alarm[i] = false;
+ updated_min_alarm = true;
+ }
+ }
+ }
+ if (data->max[i] != 0) {
+ if (temp > data->max[i]) {
+ if (data->max_alarm[i] == false) {
+ data->max_alarm[i] = true;
+ updated_max_alarm = true;
+ }
+ } else if (temp < data->max[i] - data->max_hyst[i]) {
+ if (data->max_alarm[i] == true) {
+ data->max_alarm[i] = false;
+ updated_max_alarm = true;
+ }
+ }
+ }
+
+ if (updated_min_alarm) {
+ ret = sprintf(alarm_node, "temp%d_min_alarm", i + 1);
+ sysfs_notify(&data->pdev->dev.kobj, NULL, alarm_node);
+ }
+ if (updated_max_alarm) {
+ ret = sprintf(alarm_node, "temp%d_max_alarm", i + 1);
+ sysfs_notify(&data->pdev->dev.kobj, NULL, alarm_node);
+ }
+ }
+
+ schedule_monitor(data);
+ mutex_unlock(&data->lock);
+}
+
+/* HWMON sysfs interfaces */
+static ssize_t show_name(struct device *dev, struct device_attribute *devattr,
+ char *buf)
+{
+ struct abx500_temp *data = dev_get_drvdata(dev);
+ /* Show chip name */
+ return data->ops.show_name(dev, devattr, buf);
+}
+
+static ssize_t show_label(struct device *dev,
+ struct device_attribute *devattr, char *buf)
+{
+ struct abx500_temp *data = dev_get_drvdata(dev);
+ /* Show each sensor label */
+ return data->ops.show_label(dev, devattr, buf);
+}
+
+static ssize_t show_input(struct device *dev,
+ struct device_attribute *devattr, char *buf)
+{
+ int ret, temp;
+ struct abx500_temp *data = dev_get_drvdata(dev);
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ u8 gpadc_addr = data->gpadc_addr[attr->index];
+
+ ret = data->ops.read_sensor(data, gpadc_addr, &temp);
+ if (ret < 0)
+ return ret;
+
+ return sprintf(buf, "%d\n", temp);
+}
+
+/* Set functions (RW nodes) */
+static ssize_t set_min(struct device *dev, struct device_attribute *devattr,
+ const char *buf, size_t count)
+{
+ unsigned long val;
+ struct abx500_temp *data = dev_get_drvdata(dev);
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ int res = kstrtol(buf, 10, &val);
+ if (res < 0)
+ return res;
+
+ val = clamp_val(val, 0, DEFAULT_MAX_TEMP);
+
+ mutex_lock(&data->lock);
+ data->min[attr->index] = val;
+ threshold_updated(data);
+ mutex_unlock(&data->lock);
+
+ return count;
+}
+
+static ssize_t set_max(struct device *dev, struct device_attribute *devattr,
+ const char *buf, size_t count)
+{
+ unsigned long val;
+ struct abx500_temp *data = dev_get_drvdata(dev);
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ int res = kstrtol(buf, 10, &val);
+ if (res < 0)
+ return res;
+
+ val = clamp_val(val, 0, DEFAULT_MAX_TEMP);
+
+ mutex_lock(&data->lock);
+ data->max[attr->index] = val;
+ threshold_updated(data);
+ mutex_unlock(&data->lock);
+
+ return count;
+}
+
+static ssize_t set_max_hyst(struct device *dev,
+ struct device_attribute *devattr,
+ const char *buf, size_t count)
+{
+ unsigned long val;
+ struct abx500_temp *data = dev_get_drvdata(dev);
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ int res = kstrtoul(buf, 10, &val);
+ if (res < 0)
+ return res;
+
+ val = clamp_val(val, 0, DEFAULT_MAX_TEMP);
+
+ mutex_lock(&data->lock);
+ data->max_hyst[attr->index] = val;
+ threshold_updated(data);
+ mutex_unlock(&data->lock);
+
+ return count;
+}
+
+/* Show functions (RO nodes) */
+static ssize_t show_min(struct device *dev,
+ struct device_attribute *devattr, char *buf)
+{
+ struct abx500_temp *data = dev_get_drvdata(dev);
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+
+ return sprintf(buf, "%ld\n", data->min[attr->index]);
+}
+
+static ssize_t show_max(struct device *dev,
+ struct device_attribute *devattr, char *buf)
+{
+ struct abx500_temp *data = dev_get_drvdata(dev);
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+
+ return sprintf(buf, "%ld\n", data->max[attr->index]);
+}
+
+static ssize_t show_max_hyst(struct device *dev,
+ struct device_attribute *devattr, char *buf)
+{
+ struct abx500_temp *data = dev_get_drvdata(dev);
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+
+ return sprintf(buf, "%ld\n", data->max_hyst[attr->index]);
+}
+
+static ssize_t show_min_alarm(struct device *dev,
+ struct device_attribute *devattr, char *buf)
+{
+ struct abx500_temp *data = dev_get_drvdata(dev);
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+
+ return sprintf(buf, "%d\n", data->min_alarm[attr->index]);
+}
+
+static ssize_t show_max_alarm(struct device *dev,
+ struct device_attribute *devattr, char *buf)
+{
+ struct abx500_temp *data = dev_get_drvdata(dev);
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+
+ return sprintf(buf, "%d\n", data->max_alarm[attr->index]);
+}
+
+static mode_t abx500_attrs_visible(struct kobject *kobj,
+ struct attribute *attr, int n)
+{
+ struct device *dev = container_of(kobj, struct device, kobj);
+ struct abx500_temp *data = dev_get_drvdata(dev);
+
+ if (data->ops.is_visible)
+ return data->ops.is_visible(attr, n);
+
+ return attr->mode;
+}
+
+/* Chip name, required by hwmon */
+static SENSOR_DEVICE_ATTR(name, S_IRUGO, show_name, NULL, 0);
+
+/* GPADC - SENSOR1 */
+static SENSOR_DEVICE_ATTR(temp1_label, S_IRUGO, show_label, NULL, 0);
+static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_input, NULL, 0);
+static SENSOR_DEVICE_ATTR(temp1_min, S_IWUSR | S_IRUGO, show_min, set_min, 0);
+static SENSOR_DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO, show_max, set_max, 0);
+static SENSOR_DEVICE_ATTR(temp1_max_hyst, S_IWUSR | S_IRUGO,
+ show_max_hyst, set_max_hyst, 0);
+static SENSOR_DEVICE_ATTR(temp1_min_alarm, S_IRUGO, show_min_alarm, NULL, 0);
+static SENSOR_DEVICE_ATTR(temp1_max_alarm, S_IRUGO, show_max_alarm, NULL, 0);
+
+/* GPADC - SENSOR2 */
+static SENSOR_DEVICE_ATTR(temp2_label, S_IRUGO, show_label, NULL, 1);
+static SENSOR_DEVICE_ATTR(temp2_input, S_IRUGO, show_input, NULL, 1);
+static SENSOR_DEVICE_ATTR(temp2_min, S_IWUSR | S_IRUGO, show_min, set_min, 1);
+static SENSOR_DEVICE_ATTR(temp2_max, S_IWUSR | S_IRUGO, show_max, set_max, 1);
+static SENSOR_DEVICE_ATTR(temp2_max_hyst, S_IWUSR | S_IRUGO,
+ show_max_hyst, set_max_hyst, 1);
+static SENSOR_DEVICE_ATTR(temp2_min_alarm, S_IRUGO, show_min_alarm, NULL, 1);
+static SENSOR_DEVICE_ATTR(temp2_max_alarm, S_IRUGO, show_max_alarm, NULL, 1);
+
+/* GPADC - SENSOR3 */
+static SENSOR_DEVICE_ATTR(temp3_label, S_IRUGO, show_label, NULL, 2);
+static SENSOR_DEVICE_ATTR(temp3_input, S_IRUGO, show_input, NULL, 2);
+static SENSOR_DEVICE_ATTR(temp3_min, S_IWUSR | S_IRUGO, show_min, set_min, 2);
+static SENSOR_DEVICE_ATTR(temp3_max, S_IWUSR | S_IRUGO, show_max, set_max, 2);
+static SENSOR_DEVICE_ATTR(temp3_max_hyst, S_IWUSR | S_IRUGO,
+ show_max_hyst, set_max_hyst, 2);
+static SENSOR_DEVICE_ATTR(temp3_min_alarm, S_IRUGO, show_min_alarm, NULL, 2);
+static SENSOR_DEVICE_ATTR(temp3_max_alarm, S_IRUGO, show_max_alarm, NULL, 2);
+
+/* GPADC - SENSOR4 */
+static SENSOR_DEVICE_ATTR(temp4_label, S_IRUGO, show_label, NULL, 3);
+static SENSOR_DEVICE_ATTR(temp4_input, S_IRUGO, show_input, NULL, 3);
+static SENSOR_DEVICE_ATTR(temp4_min, S_IWUSR | S_IRUGO, show_min, set_min, 3);
+static SENSOR_DEVICE_ATTR(temp4_max, S_IWUSR | S_IRUGO, show_max, set_max, 3);
+static SENSOR_DEVICE_ATTR(temp4_max_hyst, S_IWUSR | S_IRUGO,
+ show_max_hyst, set_max_hyst, 3);
+static SENSOR_DEVICE_ATTR(temp4_min_alarm, S_IRUGO, show_min_alarm, NULL, 3);
+static SENSOR_DEVICE_ATTR(temp4_max_alarm, S_IRUGO, show_max_alarm, NULL, 3);
+
+struct attribute *abx500_temp_attributes[] = {
+ &sensor_dev_attr_name.dev_attr.attr,
+
+ &sensor_dev_attr_temp1_label.dev_attr.attr,
+ &sensor_dev_attr_temp1_input.dev_attr.attr,
+ &sensor_dev_attr_temp1_min.dev_attr.attr,
+ &sensor_dev_attr_temp1_max.dev_attr.attr,
+ &sensor_dev_attr_temp1_max_hyst.dev_attr.attr,
+ &sensor_dev_attr_temp1_min_alarm.dev_attr.attr,
+ &sensor_dev_attr_temp1_max_alarm.dev_attr.attr,
+
+ &sensor_dev_attr_temp2_label.dev_attr.attr,
+ &sensor_dev_attr_temp2_input.dev_attr.attr,
+ &sensor_dev_attr_temp2_min.dev_attr.attr,
+ &sensor_dev_attr_temp2_max.dev_attr.attr,
+ &sensor_dev_attr_temp2_max_hyst.dev_attr.attr,
+ &sensor_dev_attr_temp2_min_alarm.dev_attr.attr,
+ &sensor_dev_attr_temp2_max_alarm.dev_attr.attr,
+
+ &sensor_dev_attr_temp3_label.dev_attr.attr,
+ &sensor_dev_attr_temp3_input.dev_attr.attr,
+ &sensor_dev_attr_temp3_min.dev_attr.attr,
+ &sensor_dev_attr_temp3_max.dev_attr.attr,
+ &sensor_dev_attr_temp3_max_hyst.dev_attr.attr,
+ &sensor_dev_attr_temp3_min_alarm.dev_attr.attr,
+ &sensor_dev_attr_temp3_max_alarm.dev_attr.attr,
+
+ &sensor_dev_attr_temp4_label.dev_attr.attr,
+ &sensor_dev_attr_temp4_input.dev_attr.attr,
+ &sensor_dev_attr_temp4_min.dev_attr.attr,
+ &sensor_dev_attr_temp4_max.dev_attr.attr,
+ &sensor_dev_attr_temp4_max_hyst.dev_attr.attr,
+ &sensor_dev_attr_temp4_min_alarm.dev_attr.attr,
+ &sensor_dev_attr_temp4_max_alarm.dev_attr.attr,
+ NULL
+};
+
+static const struct attribute_group abx500_temp_group = {
+ .attrs = abx500_temp_attributes,
+ .is_visible = abx500_attrs_visible,
+};
+
+static irqreturn_t abx500_temp_irq_handler(int irq, void *irq_data)
+{
+ struct platform_device *pdev = irq_data;
+ struct abx500_temp *data = platform_get_drvdata(pdev);
+
+ data->ops.irq_handler(irq, data);
+ return IRQ_HANDLED;
+}
+
+static int setup_irqs(struct platform_device *pdev)
+{
+ int ret;
+ int irq = platform_get_irq_byname(pdev, "ABX500_TEMP_WARM");
+
+ if (irq < 0) {
+ dev_err(&pdev->dev, "Get irq by name failed\n");
+ return irq;
+ }
+
+ ret = devm_request_threaded_irq(&pdev->dev, irq, NULL,
+ abx500_temp_irq_handler, IRQF_NO_SUSPEND, "abx500-temp", pdev);
+ if (ret < 0)
+ dev_err(&pdev->dev, "Request threaded irq failed (%d)\n", ret);
+
+ return ret;
+}
+
+static int abx500_temp_probe(struct platform_device *pdev)
+{
+ struct abx500_temp *data;
+ int err;
+
+ data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ data->pdev = pdev;
+ mutex_init(&data->lock);
+
+ /* Chip specific initialization */
+ err = abx500_hwmon_init(data);
+ if (err < 0 || !data->ops.read_sensor || !data->ops.show_name ||
+ !data->ops.show_label)
+ return err;
+
+ INIT_DEFERRABLE_WORK(&data->work, gpadc_monitor);
+
+ platform_set_drvdata(pdev, data);
+
+ err = sysfs_create_group(&pdev->dev.kobj, &abx500_temp_group);
+ if (err < 0) {
+ dev_err(&pdev->dev, "Create sysfs group failed (%d)\n", err);
+ return err;
+ }
+
+ data->hwmon_dev = hwmon_device_register(&pdev->dev);
+ if (IS_ERR(data->hwmon_dev)) {
+ err = PTR_ERR(data->hwmon_dev);
+ dev_err(&pdev->dev, "Class registration failed (%d)\n", err);
+ goto exit_sysfs_group;
+ }
+
+ if (data->ops.irq_handler) {
+ err = setup_irqs(pdev);
+ if (err < 0)
+ goto exit_hwmon_reg;
+ }
+ return 0;
+
+exit_hwmon_reg:
+ hwmon_device_unregister(data->hwmon_dev);
+exit_sysfs_group:
+ sysfs_remove_group(&pdev->dev.kobj, &abx500_temp_group);
+ return err;
+}
+
+static int abx500_temp_remove(struct platform_device *pdev)
+{
+ struct abx500_temp *data = platform_get_drvdata(pdev);
+
+ cancel_delayed_work_sync(&data->work);
+ hwmon_device_unregister(data->hwmon_dev);
+ sysfs_remove_group(&pdev->dev.kobj, &abx500_temp_group);
+
+ return 0;
+}
+
+static int abx500_temp_suspend(struct platform_device *pdev,
+ pm_message_t state)
+{
+ struct abx500_temp *data = platform_get_drvdata(pdev);
+
+ if (data->work_active)
+ cancel_delayed_work_sync(&data->work);
+
+ return 0;
+}
+
+static int abx500_temp_resume(struct platform_device *pdev)
+{
+ struct abx500_temp *data = platform_get_drvdata(pdev);
+
+ if (data->work_active)
+ schedule_monitor(data);
+
+ return 0;
+}
+
+#ifdef CONFIG_OF
+static const struct of_device_id abx500_temp_match[] = {
+ { .compatible = "stericsson,abx500-temp" },
+ {},
+};
+#endif
+
+static struct platform_driver abx500_temp_driver = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "abx500-temp",
+ .of_match_table = of_match_ptr(abx500_temp_match),
+ },
+ .suspend = abx500_temp_suspend,
+ .resume = abx500_temp_resume,
+ .probe = abx500_temp_probe,
+ .remove = abx500_temp_remove,
+};
+
+module_platform_driver(abx500_temp_driver);
+
+MODULE_AUTHOR("Martin Persson <martin.persson@stericsson.com>");
+MODULE_DESCRIPTION("ABX500 temperature driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/hwmon/abx500.h b/drivers/hwmon/abx500.h
new file mode 100644
index 000000000000..9b295e684d0e
--- /dev/null
+++ b/drivers/hwmon/abx500.h
@@ -0,0 +1,69 @@
+/*
+ * Copyright (C) ST-Ericsson 2010 - 2013
+ * License terms: GNU General Public License v2
+ * Author: Martin Persson <martin.persson@stericsson.com>
+ * Hongbo Zhang <hongbo.zhang@linaro.com>
+ */
+
+#ifndef _ABX500_H
+#define _ABX500_H
+
+#define NUM_SENSORS 5
+
+struct abx500_temp;
+
+/*
+ * struct abx500_temp_ops - abx500 chip specific ops
+ * @read_sensor: reads gpadc output
+ * @irq_handler: irq handler
+ * @show_name: hwmon device name
+ * @show_label: hwmon attribute label
+ * @is_visible: is attribute visible
+ */
+struct abx500_temp_ops {
+ int (*read_sensor)(struct abx500_temp *, u8, int *);
+ int (*irq_handler)(int, struct abx500_temp *);
+ ssize_t (*show_name)(struct device *,
+ struct device_attribute *, char *);
+ ssize_t (*show_label) (struct device *,
+ struct device_attribute *, char *);
+ int (*is_visible)(struct attribute *, int);
+};
+
+/*
+ * struct abx500_temp - representation of temp mon device
+ * @pdev: platform device
+ * @hwmon_dev: hwmon device
+ * @ops: abx500 chip specific ops
+ * @gpadc_addr: gpadc channel address
+ * @min: sensor temperature min value
+ * @max: sensor temperature max value
+ * @max_hyst: sensor temperature hysteresis value for max limit
+ * @min_alarm: sensor temperature min alarm
+ * @max_alarm: sensor temperature max alarm
+ * @work: delayed work scheduled to monitor temperature periodically
+ * @work_active: True if work is active
+ * @lock: mutex
+ * @monitored_sensors: number of monitored sensors
+ * @plat_data: private usage, usually points to platform specific data
+ */
+struct abx500_temp {
+ struct platform_device *pdev;
+ struct device *hwmon_dev;
+ struct abx500_temp_ops ops;
+ u8 gpadc_addr[NUM_SENSORS];
+ unsigned long min[NUM_SENSORS];
+ unsigned long max[NUM_SENSORS];
+ unsigned long max_hyst[NUM_SENSORS];
+ bool min_alarm[NUM_SENSORS];
+ bool max_alarm[NUM_SENSORS];
+ struct delayed_work work;
+ bool work_active;
+ struct mutex lock;
+ int monitored_sensors;
+ void *plat_data;
+};
+
+int abx500_hwmon_init(struct abx500_temp *data);
+
+#endif /* _ABX500_H */
diff --git a/drivers/mfd/ab8500-core.c b/drivers/mfd/ab8500-core.c
index 7c84ced2e01b..f276352cc9ef 100644
--- a/drivers/mfd/ab8500-core.c
+++ b/drivers/mfd/ab8500-core.c
@@ -95,6 +95,7 @@
#define AB8500_IT_MASK22_REG 0x55
#define AB8500_IT_MASK23_REG 0x56
#define AB8500_IT_MASK24_REG 0x57
+#define AB8500_IT_MASK25_REG 0x58
/*
* latch hierarchy registers
@@ -102,15 +103,25 @@
#define AB8500_IT_LATCHHIER1_REG 0x60
#define AB8500_IT_LATCHHIER2_REG 0x61
#define AB8500_IT_LATCHHIER3_REG 0x62
+#define AB8540_IT_LATCHHIER4_REG 0x63
#define AB8500_IT_LATCHHIER_NUM 3
+#define AB8540_IT_LATCHHIER_NUM 4
#define AB8500_REV_REG 0x80
#define AB8500_IC_NAME_REG 0x82
#define AB8500_SWITCH_OFF_STATUS 0x00
#define AB8500_TURN_ON_STATUS 0x00
+#define AB8505_TURN_ON_STATUS_2 0x04
+#define AB8500_CH_USBCH_STAT1_REG 0x02
+#define VBUS_DET_DBNC100 0x02
+#define VBUS_DET_DBNC1 0x01
+
+static DEFINE_SPINLOCK(on_stat_lock);
+static u8 turn_on_stat_mask = 0xFF;
+static u8 turn_on_stat_set;
static bool no_bm; /* No battery management */
module_param(no_bm, bool, S_IRUGO);
@@ -130,9 +141,15 @@ static const int ab8500_irq_regoffset[AB8500_NUM_IRQ_REGS] = {
0, 1, 2, 3, 4, 6, 7, 8, 9, 11, 18, 19, 20, 21,
};
-/* AB9540 support */
+/* AB9540 / AB8505 support */
static const int ab9540_irq_regoffset[AB9540_NUM_IRQ_REGS] = {
- 0, 1, 2, 3, 4, 6, 7, 8, 9, 11, 18, 19, 20, 21, 12, 13, 24,
+ 0, 1, 2, 3, 4, 6, 7, 8, 9, 11, 18, 19, 20, 21, 12, 13, 24, 5, 22, 23
+};
+
+/* AB8540 support */
+static const int ab8540_irq_regoffset[AB8540_NUM_IRQ_REGS] = {
+ 0, 1, 2, 3, 4, -1, -1, -1, -1, 11, 18, 19, 20, 21, 12, 13, 24, 5, 22, 23,
+ 25, 26, 27, 28, 29, 30, 31,
};
static const char ab8500_version_str[][7] = {
@@ -352,6 +369,9 @@ static void ab8500_irq_sync_unlock(struct irq_data *data)
is_ab8500_1p1_or_earlier(ab8500))
continue;
+ if (ab8500->irq_reg_offset[i] < 0)
+ continue;
+
ab8500->oldmask[i] = new;
reg = AB8500_IT_MASK1_REG + ab8500->irq_reg_offset[i];
@@ -423,6 +443,18 @@ static struct irq_chip ab8500_irq_chip = {
.irq_set_type = ab8500_irq_set_type,
};
+static void update_latch_offset(u8 *offset, int i)
+{
+ /* Fix inconsistent ITFromLatch25 bit mapping... */
+ if (unlikely(*offset == 17))
+ *offset = 24;
+ /* Fix inconsistent ab8540 bit mapping... */
+ if (unlikely(*offset == 16))
+ *offset = 25;
+ if ((i==3) && (*offset >= 24))
+ *offset += 2;
+}
+
static int ab8500_handle_hierarchical_line(struct ab8500 *ab8500,
int latch_offset, u8 latch_val)
{
@@ -474,9 +506,7 @@ static int ab8500_handle_hierarchical_latch(struct ab8500 *ab8500,
latch_bit = __ffs(hier_val);
latch_offset = (hier_offset << 3) + latch_bit;
- /* Fix inconsistent ITFromLatch25 bit mapping... */
- if (unlikely(latch_offset == 17))
- latch_offset = 24;
+ update_latch_offset(&latch_offset, hier_offset);
status = get_register_interruptible(ab8500,
AB8500_INTERRUPT,
@@ -504,7 +534,7 @@ static irqreturn_t ab8500_hierarchical_irq(int irq, void *dev)
dev_vdbg(ab8500->dev, "interrupt\n");
/* Hierarchical interrupt version */
- for (i = 0; i < AB8500_IT_LATCHHIER_NUM; i++) {
+ for (i = 0; i < (ab8500->it_latchhier_num); i++) {
int status;
u8 hier_val;
@@ -520,63 +550,6 @@ static irqreturn_t ab8500_hierarchical_irq(int irq, void *dev)
return IRQ_HANDLED;
}
-/**
- * ab8500_irq_get_virq(): Map an interrupt on a chip to a virtual IRQ
- *
- * @ab8500: ab8500_irq controller to operate on.
- * @irq: index of the interrupt requested in the chip IRQs
- *
- * Useful for drivers to request their own IRQs.
- */
-static int ab8500_irq_get_virq(struct ab8500 *ab8500, int irq)
-{
- if (!ab8500)
- return -EINVAL;
-
- return irq_create_mapping(ab8500->domain, irq);
-}
-
-static irqreturn_t ab8500_irq(int irq, void *dev)
-{
- struct ab8500 *ab8500 = dev;
- int i;
-
- dev_vdbg(ab8500->dev, "interrupt\n");
-
- atomic_inc(&ab8500->transfer_ongoing);
-
- for (i = 0; i < ab8500->mask_size; i++) {
- int regoffset = ab8500->irq_reg_offset[i];
- int status;
- u8 value;
-
- /*
- * Interrupt register 12 doesn't exist prior to AB8500 version
- * 2.0
- */
- if (regoffset == 11 && is_ab8500_1p1_or_earlier(ab8500))
- continue;
-
- status = get_register_interruptible(ab8500, AB8500_INTERRUPT,
- AB8500_IT_LATCH1_REG + regoffset, &value);
- if (status < 0 || value == 0)
- continue;
-
- do {
- int bit = __ffs(value);
- int line = i * 8 + bit;
- int virq = ab8500_irq_get_virq(ab8500, line);
-
- handle_nested_irq(virq);
- ab8500_debug_register_interrupt(line);
- value &= ~(1 << bit);
-
- } while (value);
- }
- atomic_dec(&ab8500->transfer_ongoing);
- return IRQ_HANDLED;
-}
-
static int ab8500_irq_map(struct irq_domain *d, unsigned int virq,
irq_hw_number_t hwirq)
{
@@ -607,7 +580,9 @@ static int ab8500_irq_init(struct ab8500 *ab8500, struct device_node *np)
{
int num_irqs;
- if (is_ab9540(ab8500))
+ if (is_ab8540(ab8500))
+ num_irqs = AB8540_NR_IRQS;
+ else if (is_ab9540(ab8500))
num_irqs = AB9540_NR_IRQS;
else if (is_ab8505(ab8500))
num_irqs = AB8505_NR_IRQS;
@@ -650,6 +625,15 @@ static struct resource ab8500_gpadc_resources[] = {
},
};
+static struct resource ab8505_gpadc_resources[] = {
+ {
+ .name = "SW_CONV_END",
+ .start = AB8500_INT_GP_SW_ADC_CONV_END,
+ .end = AB8500_INT_GP_SW_ADC_CONV_END,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
static struct resource ab8500_rtc_resources[] = {
{
.name = "60S",
@@ -973,6 +957,30 @@ static struct resource ab8505_iddet_resources[] = {
.end = AB8505_INT_KEYSTUCK,
.flags = IORESOURCE_IRQ,
},
+ {
+ .name = "VBUS_DET_R",
+ .start = AB8500_INT_VBUS_DET_R,
+ .end = AB8500_INT_VBUS_DET_R,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .name = "VBUS_DET_F",
+ .start = AB8500_INT_VBUS_DET_F,
+ .end = AB8500_INT_VBUS_DET_F,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .name = "ID_DET_PLUGR",
+ .start = AB8500_INT_ID_DET_PLUGR,
+ .end = AB8500_INT_ID_DET_PLUGR,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .name = "ID_DET_PLUGF",
+ .start = AB8500_INT_ID_DET_PLUGF,
+ .end = AB8500_INT_ID_DET_PLUGF,
+ .flags = IORESOURCE_IRQ,
+ },
};
static struct resource ab8500_temp_resources[] = {
@@ -984,7 +992,42 @@ static struct resource ab8500_temp_resources[] = {
},
};
-static struct mfd_cell abx500_common_devs[] = {
+static struct mfd_cell ab8500_bm_devs[] = {
+ {
+ .name = "ab8500-charger",
+ .of_compatible = "stericsson,ab8500-charger",
+ .num_resources = ARRAY_SIZE(ab8500_charger_resources),
+ .resources = ab8500_charger_resources,
+ .platform_data = &ab8500_bm_data,
+ .pdata_size = sizeof(ab8500_bm_data),
+ },
+ {
+ .name = "ab8500-btemp",
+ .of_compatible = "stericsson,ab8500-btemp",
+ .num_resources = ARRAY_SIZE(ab8500_btemp_resources),
+ .resources = ab8500_btemp_resources,
+ .platform_data = &ab8500_bm_data,
+ .pdata_size = sizeof(ab8500_bm_data),
+ },
+ {
+ .name = "ab8500-fg",
+ .of_compatible = "stericsson,ab8500-fg",
+ .num_resources = ARRAY_SIZE(ab8500_fg_resources),
+ .resources = ab8500_fg_resources,
+ .platform_data = &ab8500_bm_data,
+ .pdata_size = sizeof(ab8500_bm_data),
+ },
+ {
+ .name = "ab8500-chargalg",
+ .of_compatible = "stericsson,ab8500-chargalg",
+ .num_resources = ARRAY_SIZE(ab8500_chargalg_resources),
+ .resources = ab8500_chargalg_resources,
+ .platform_data = &ab8500_bm_data,
+ .pdata_size = sizeof(ab8500_bm_data),
+ },
+};
+
+static struct mfd_cell ab8500_devs[] = {
#ifdef CONFIG_DEBUG_FS
{
.name = "ab8500-debug",
@@ -1007,7 +1050,6 @@ static struct mfd_cell abx500_common_devs[] = {
},
{
.name = "ab8500-gpadc",
- .of_compatible = "stericsson,ab8500-gpadc",
.num_resources = ARRAY_SIZE(ab8500_gpadc_resources),
.resources = ab8500_gpadc_resources,
},
@@ -1024,6 +1066,7 @@ static struct mfd_cell abx500_common_devs[] = {
.resources = ab8500_av_acc_detect_resources,
},
{
+
.name = "ab8500-poweron-key",
.of_compatible = "stericsson,ab8500-poweron-key",
.num_resources = ARRAY_SIZE(ab8500_poweronkey_db_resources),
@@ -1053,82 +1096,220 @@ static struct mfd_cell abx500_common_devs[] = {
.of_compatible = "stericsson,ab8500-denc",
},
{
+ .name = "ab8500-gpio",
+ .of_compatible = "stericsson,ab8500-gpio",
+ },
+ {
.name = "abx500-temp",
.of_compatible = "stericsson,abx500-temp",
.num_resources = ARRAY_SIZE(ab8500_temp_resources),
.resources = ab8500_temp_resources,
},
+ {
+ .name = "ab8500-usb",
+ .num_resources = ARRAY_SIZE(ab8500_usb_resources),
+ .resources = ab8500_usb_resources,
+ },
+ {
+ .name = "ab8500-codec",
+ },
};
-static struct mfd_cell ab8500_bm_devs[] = {
+static struct mfd_cell ab9540_devs[] = {
+#ifdef CONFIG_DEBUG_FS
{
- .name = "ab8500-charger",
- .of_compatible = "stericsson,ab8500-charger",
- .num_resources = ARRAY_SIZE(ab8500_charger_resources),
- .resources = ab8500_charger_resources,
- .platform_data = &ab8500_bm_data,
- .pdata_size = sizeof(ab8500_bm_data),
+ .name = "ab8500-debug",
+ .num_resources = ARRAY_SIZE(ab8500_debug_resources),
+ .resources = ab8500_debug_resources,
},
+#endif
{
- .name = "ab8500-btemp",
- .of_compatible = "stericsson,ab8500-btemp",
- .num_resources = ARRAY_SIZE(ab8500_btemp_resources),
- .resources = ab8500_btemp_resources,
- .platform_data = &ab8500_bm_data,
- .pdata_size = sizeof(ab8500_bm_data),
+ .name = "ab8500-sysctrl",
},
{
- .name = "ab8500-fg",
- .of_compatible = "stericsson,ab8500-fg",
- .num_resources = ARRAY_SIZE(ab8500_fg_resources),
- .resources = ab8500_fg_resources,
- .platform_data = &ab8500_bm_data,
- .pdata_size = sizeof(ab8500_bm_data),
+ .name = "ab8500-regulator",
},
{
- .name = "ab8500-chargalg",
- .of_compatible = "stericsson,ab8500-chargalg",
- .num_resources = ARRAY_SIZE(ab8500_chargalg_resources),
- .resources = ab8500_chargalg_resources,
- .platform_data = &ab8500_bm_data,
- .pdata_size = sizeof(ab8500_bm_data),
+ .name = "abx500-clk",
+ .of_compatible = "stericsson,abx500-clk",
+ },
+ {
+ .name = "ab8500-gpadc",
+ .of_compatible = "stericsson,ab8500-gpadc",
+ .num_resources = ARRAY_SIZE(ab8500_gpadc_resources),
+ .resources = ab8500_gpadc_resources,
+ },
+ {
+ .name = "ab8500-rtc",
+ .num_resources = ARRAY_SIZE(ab8500_rtc_resources),
+ .resources = ab8500_rtc_resources,
+ },
+ {
+ .name = "ab8500-acc-det",
+ .num_resources = ARRAY_SIZE(ab8500_av_acc_detect_resources),
+ .resources = ab8500_av_acc_detect_resources,
+ },
+ {
+ .name = "ab8500-poweron-key",
+ .num_resources = ARRAY_SIZE(ab8500_poweronkey_db_resources),
+ .resources = ab8500_poweronkey_db_resources,
+ },
+ {
+ .name = "ab8500-pwm",
+ .id = 1,
+ },
+ {
+ .name = "ab8500-leds",
+ },
+ {
+ .name = "abx500-temp",
+ .num_resources = ARRAY_SIZE(ab8500_temp_resources),
+ .resources = ab8500_temp_resources,
+ },
+ {
+ .name = "pinctrl-ab9540",
+ .of_compatible = "stericsson,ab9540-gpio",
+ },
+ {
+ .name = "ab9540-usb",
+ .num_resources = ARRAY_SIZE(ab8500_usb_resources),
+ .resources = ab8500_usb_resources,
+ },
+ {
+ .name = "ab9540-codec",
+ },
+ {
+ .name = "ab-iddet",
+ .num_resources = ARRAY_SIZE(ab8505_iddet_resources),
+ .resources = ab8505_iddet_resources,
},
};
-static struct mfd_cell ab8500_devs[] = {
+/* Device list for ab8505 */
+static struct mfd_cell ab8505_devs[] = {
+#ifdef CONFIG_DEBUG_FS
{
- .name = "pinctrl-ab8500",
- .of_compatible = "stericsson,ab8500-gpio",
+ .name = "ab8500-debug",
+ .num_resources = ARRAY_SIZE(ab8500_debug_resources),
+ .resources = ab8500_debug_resources,
+ },
+#endif
+ {
+ .name = "ab8500-sysctrl",
+ },
+ {
+ .name = "ab8500-regulator",
+ },
+ {
+ .name = "abx500-clk",
+ .of_compatible = "stericsson,abx500-clk",
+ },
+ {
+ .name = "ab8500-gpadc",
+ .num_resources = ARRAY_SIZE(ab8505_gpadc_resources),
+ .resources = ab8505_gpadc_resources,
+ },
+ {
+ .name = "ab8500-rtc",
+ .num_resources = ARRAY_SIZE(ab8500_rtc_resources),
+ .resources = ab8500_rtc_resources,
+ },
+ {
+ .name = "ab8500-acc-det",
+ .num_resources = ARRAY_SIZE(ab8500_av_acc_detect_resources),
+ .resources = ab8500_av_acc_detect_resources,
+ },
+ {
+ .name = "ab8500-poweron-key",
+ .num_resources = ARRAY_SIZE(ab8500_poweronkey_db_resources),
+ .resources = ab8500_poweronkey_db_resources,
+ },
+ {
+ .name = "ab8500-pwm",
+ .id = 1,
+ },
+ {
+ .name = "ab8500-leds",
+ },
+ {
+ .name = "ab8500-gpio",
},
{
.name = "ab8500-usb",
- .of_compatible = "stericsson,ab8500-usb",
.num_resources = ARRAY_SIZE(ab8500_usb_resources),
.resources = ab8500_usb_resources,
},
{
.name = "ab8500-codec",
- .of_compatible = "stericsson,ab8500-codec",
+ },
+ {
+ .name = "ab-iddet",
+ .num_resources = ARRAY_SIZE(ab8505_iddet_resources),
+ .resources = ab8505_iddet_resources,
},
};
-static struct mfd_cell ab9540_devs[] = {
+static struct mfd_cell ab8540_devs[] = {
+#ifdef CONFIG_DEBUG_FS
{
- .name = "pinctrl-ab9540",
- .of_compatible = "stericsson,ab9540-gpio",
+ .name = "ab8500-debug",
+ .num_resources = ARRAY_SIZE(ab8500_debug_resources),
+ .resources = ab8500_debug_resources,
+ },
+#endif
+ {
+ .name = "ab8500-sysctrl",
},
{
- .name = "ab9540-usb",
+ .name = "ab8500-regulator",
+ },
+ {
+ .name = "abx500-clk",
+ .of_compatible = "stericsson,abx500-clk",
+ },
+ {
+ .name = "ab8500-gpadc",
+ .num_resources = ARRAY_SIZE(ab8505_gpadc_resources),
+ .resources = ab8505_gpadc_resources,
+ },
+ {
+ .name = "ab8500-rtc",
+ .num_resources = ARRAY_SIZE(ab8500_rtc_resources),
+ .resources = ab8500_rtc_resources,
+ },
+ {
+ .name = "ab8500-acc-det",
+ .num_resources = ARRAY_SIZE(ab8500_av_acc_detect_resources),
+ .resources = ab8500_av_acc_detect_resources,
+ },
+ {
+ .name = "ab8500-poweron-key",
+ .num_resources = ARRAY_SIZE(ab8500_poweronkey_db_resources),
+ .resources = ab8500_poweronkey_db_resources,
+ },
+ {
+ .name = "ab8500-pwm",
+ .id = 1,
+ },
+ {
+ .name = "ab8500-leds",
+ },
+ {
+ .name = "abx500-temp",
+ .num_resources = ARRAY_SIZE(ab8500_temp_resources),
+ .resources = ab8500_temp_resources,
+ },
+ {
+ .name = "ab8500-gpio",
+ },
+ {
+ .name = "ab8540-usb",
.num_resources = ARRAY_SIZE(ab8500_usb_resources),
.resources = ab8500_usb_resources,
},
{
- .name = "ab9540-codec",
+ .name = "ab8540-codec",
},
-};
-
-/* Device list common to ab9540 and ab8505 */
-static struct mfd_cell ab9540_ab8505_devs[] = {
{
.name = "ab-iddet",
.num_resources = ARRAY_SIZE(ab8505_iddet_resources),
@@ -1142,6 +1323,7 @@ static ssize_t show_chip_id(struct device *dev,
struct ab8500 *ab8500;
ab8500 = dev_get_drvdata(dev);
+
return sprintf(buf, "%#x\n", ab8500 ? ab8500->chip_id : -EINVAL);
}
@@ -1171,6 +1353,15 @@ static ssize_t show_switch_off_status(struct device *dev,
return sprintf(buf, "%#x\n", value);
}
+/* use mask and set to override the register turn_on_stat value */
+void ab8500_override_turn_on_stat(u8 mask, u8 set)
+{
+ spin_lock(&on_stat_lock);
+ turn_on_stat_mask = mask;
+ turn_on_stat_set = set;
+ spin_unlock(&on_stat_lock);
+}
+
/*
* ab8500 has turned on due to (TURN_ON_STATUS):
* 0x01 PORnVbat
@@ -1194,9 +1385,38 @@ static ssize_t show_turn_on_status(struct device *dev,
AB8500_TURN_ON_STATUS, &value);
if (ret < 0)
return ret;
+
+ /*
+ * In L9540, turn_on_status register is not updated correctly if
+ * the device is rebooted with AC/USB charger connected. Due to
+ * this, the device boots android instead of entering into charge
+ * only mode. Read the AC/USB status register to detect the charger
+ * presence and update the turn on status manually.
+ */
+ if (is_ab9540(ab8500)) {
+ spin_lock(&on_stat_lock);
+ value = (value & turn_on_stat_mask) | turn_on_stat_set;
+ spin_unlock(&on_stat_lock);
+ }
+
return sprintf(buf, "%#x\n", value);
}
+static ssize_t show_turn_on_status_2(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ int ret;
+ u8 value;
+ struct ab8500 *ab8500;
+
+ ab8500 = dev_get_drvdata(dev);
+ ret = get_register_interruptible(ab8500, AB8500_SYS_CTRL1_BLOCK,
+ AB8505_TURN_ON_STATUS_2, &value);
+ if (ret < 0)
+ return ret;
+ return sprintf(buf, "%#x\n", (value & 0x1));
+}
+
static ssize_t show_ab9540_dbbrstn(struct device *dev,
struct device_attribute *attr, char *buf)
{
@@ -1253,6 +1473,7 @@ exit:
static DEVICE_ATTR(chip_id, S_IRUGO, show_chip_id, NULL);
static DEVICE_ATTR(switch_off_status, S_IRUGO, show_switch_off_status, NULL);
static DEVICE_ATTR(turn_on_status, S_IRUGO, show_turn_on_status, NULL);
+static DEVICE_ATTR(turn_on_status_2, S_IRUGO, show_turn_on_status_2, NULL);
static DEVICE_ATTR(dbbrstn, S_IRUGO | S_IWUSR,
show_ab9540_dbbrstn, store_ab9540_dbbrstn);
@@ -1263,6 +1484,11 @@ static struct attribute *ab8500_sysfs_entries[] = {
NULL,
};
+static struct attribute *ab8505_sysfs_entries[] = {
+ &dev_attr_turn_on_status_2.attr,
+ NULL,
+};
+
static struct attribute *ab9540_sysfs_entries[] = {
&dev_attr_chip_id.attr,
&dev_attr_switch_off_status.attr,
@@ -1275,6 +1501,10 @@ static struct attribute_group ab8500_attr_group = {
.attrs = ab8500_sysfs_entries,
};
+static struct attribute_group ab8505_attr_group = {
+ .attrs = ab8505_sysfs_entries,
+};
+
static struct attribute_group ab9540_attr_group = {
.attrs = ab9540_sysfs_entries,
};
@@ -1290,6 +1520,15 @@ static int ab8500_probe(struct platform_device *pdev)
"Battery level lower than power on reset threshold",
"Power on key 1 pressed longer than 10 seconds",
"DB8500 thermal shutdown"};
+ static char *turn_on_status[] = {
+ "Battery rising (Vbat)",
+ "Power On Key 1 dbF",
+ "Power On Key 2 dbF",
+ "RTC Alarm",
+ "Main Charger Detect",
+ "Vbus Detect (USB)",
+ "USB ID Detect",
+ "UART Factory Mode Detect"};
struct ab8500_platform_data *plat = dev_get_platdata(&pdev->dev);
const struct platform_device_id *platid = platform_get_device_id(pdev);
enum ab8500_version version = AB8500_VERSION_UNDEFINED;
@@ -1351,13 +1590,20 @@ static int ab8500_probe(struct platform_device *pdev)
ab8500->chip_id >> 4,
ab8500->chip_id & 0x0F);
- /* Configure AB8500 or AB9540 IRQ */
- if (is_ab9540(ab8500) || is_ab8505(ab8500)) {
+ /* Configure AB8540 */
+ if (is_ab8540(ab8500)) {
+ ab8500->mask_size = AB8540_NUM_IRQ_REGS;
+ ab8500->irq_reg_offset = ab8540_irq_regoffset;
+ ab8500->it_latchhier_num = AB8540_IT_LATCHHIER_NUM;
+ }/* Configure AB8500 or AB9540 IRQ */
+ else if (is_ab9540(ab8500) || is_ab8505(ab8500)) {
ab8500->mask_size = AB9540_NUM_IRQ_REGS;
ab8500->irq_reg_offset = ab9540_irq_regoffset;
+ ab8500->it_latchhier_num = AB8500_IT_LATCHHIER_NUM;
} else {
ab8500->mask_size = AB8500_NUM_IRQ_REGS;
ab8500->irq_reg_offset = ab8500_irq_regoffset;
+ ab8500->it_latchhier_num = AB8500_IT_LATCHHIER_NUM;
}
ab8500->mask = devm_kzalloc(&pdev->dev, ab8500->mask_size, GFP_KERNEL);
if (!ab8500->mask)
@@ -1396,10 +1642,36 @@ static int ab8500_probe(struct platform_device *pdev)
} else {
printk(KERN_CONT " None\n");
}
+ ret = get_register_interruptible(ab8500, AB8500_SYS_CTRL1_BLOCK,
+ AB8500_TURN_ON_STATUS, &value);
+ if (ret < 0)
+ return ret;
+ dev_info(ab8500->dev, "turn on reason(s) (%#x): ", value);
+
+ if (value) {
+ for (i = 0; i < ARRAY_SIZE(turn_on_status); i++) {
+ if (value & 1)
+ printk("\"%s\" ", turn_on_status[i]);
+ value = value >> 1;
+ }
+ printk("\n");
+ } else {
+ printk("None\n");
+ }
if (plat && plat->init)
plat->init(ab8500);
+ if (is_ab9540(ab8500)) {
+ ret = get_register_interruptible(ab8500, AB8500_CHARGER,
+ AB8500_CH_USBCH_STAT1_REG, &value);
+ if (ret < 0)
+ return ret;
+ if ((value & VBUS_DET_DBNC1) && (value & VBUS_DET_DBNC100))
+ ab8500_override_turn_on_stat(~AB8500_POW_KEY_1_ON,
+ AB8500_VBUS_DET);
+ }
+
/* Clear and mask all interrupts */
for (i = 0; i < ab8500->mask_size; i++) {
/*
@@ -1410,6 +1682,9 @@ static int ab8500_probe(struct platform_device *pdev)
is_ab8500_1p1_or_earlier(ab8500))
continue;
+ if (ab8500->irq_reg_offset[i] < 0)
+ continue;
+
get_register_interruptible(ab8500, AB8500_INTERRUPT,
AB8500_IT_LATCH1_REG + ab8500->irq_reg_offset[i],
&value);
@@ -1428,26 +1703,10 @@ static int ab8500_probe(struct platform_device *pdev)
if (ret)
return ret;
- /* Activate this feature only in ab9540 */
- /* till tests are done on ab8500 1p2 or later*/
- if (is_ab9540(ab8500)) {
- ret = devm_request_threaded_irq(&pdev->dev, ab8500->irq, NULL,
- ab8500_hierarchical_irq,
- IRQF_ONESHOT | IRQF_NO_SUSPEND,
- "ab8500", ab8500);
- }
- else {
- ret = devm_request_threaded_irq(&pdev->dev, ab8500->irq, NULL,
- ab8500_irq,
- IRQF_ONESHOT | IRQF_NO_SUSPEND,
- "ab8500", ab8500);
- if (ret)
- return ret;
- }
-
- ret = mfd_add_devices(ab8500->dev, 0, abx500_common_devs,
- ARRAY_SIZE(abx500_common_devs), NULL,
- ab8500->irq_base, ab8500->domain);
+ ret = devm_request_threaded_irq(&pdev->dev, ab8500->irq, NULL,
+ ab8500_hierarchical_irq,
+ IRQF_ONESHOT | IRQF_NO_SUSPEND,
+ "ab8500", ab8500);
if (ret)
return ret;
@@ -1455,6 +1714,14 @@ static int ab8500_probe(struct platform_device *pdev)
ret = mfd_add_devices(ab8500->dev, 0, ab9540_devs,
ARRAY_SIZE(ab9540_devs), NULL,
ab8500->irq_base, ab8500->domain);
+ else if (is_ab8540(ab8500))
+ ret = mfd_add_devices(ab8500->dev, 0, ab8540_devs,
+ ARRAY_SIZE(ab8540_devs), NULL,
+ ab8500->irq_base, ab8500->domain);
+ else if (is_ab8505(ab8500))
+ ret = mfd_add_devices(ab8500->dev, 0, ab8505_devs,
+ ARRAY_SIZE(ab8505_devs), NULL,
+ ab8500->irq_base, ab8500->domain);
else
ret = mfd_add_devices(ab8500->dev, 0, ab8500_devs,
ARRAY_SIZE(ab8500_devs), NULL,
@@ -1462,13 +1729,6 @@ static int ab8500_probe(struct platform_device *pdev)
if (ret)
return ret;
- if (is_ab9540(ab8500) || is_ab8505(ab8500))
- ret = mfd_add_devices(ab8500->dev, 0, ab9540_ab8505_devs,
- ARRAY_SIZE(ab9540_ab8505_devs), NULL,
- ab8500->irq_base, ab8500->domain);
- if (ret)
- return ret;
-
if (!no_bm) {
/* Add battery management devices */
ret = mfd_add_devices(ab8500->dev, 0, ab8500_bm_devs,
@@ -1478,12 +1738,19 @@ static int ab8500_probe(struct platform_device *pdev)
dev_err(ab8500->dev, "error adding bm devices\n");
}
- if (is_ab9540(ab8500))
+ if (((is_ab8505(ab8500) || is_ab9540(ab8500)) &&
+ ab8500->chip_id >= AB8500_CUT2P0) || is_ab8540(ab8500))
ret = sysfs_create_group(&ab8500->dev->kobj,
&ab9540_attr_group);
else
ret = sysfs_create_group(&ab8500->dev->kobj,
&ab8500_attr_group);
+
+ if ((is_ab8505(ab8500) || is_ab9540(ab8500)) &&
+ ab8500->chip_id >= AB8500_CUT2P0)
+ ret = sysfs_create_group(&ab8500->dev->kobj,
+ &ab8505_attr_group);
+
if (ret)
dev_err(ab8500->dev, "error creating sysfs entries\n");
@@ -1494,11 +1761,16 @@ static int ab8500_remove(struct platform_device *pdev)
{
struct ab8500 *ab8500 = platform_get_drvdata(pdev);
- if (is_ab9540(ab8500))
+ if (((is_ab8505(ab8500) || is_ab9540(ab8500)) &&
+ ab8500->chip_id >= AB8500_CUT2P0) || is_ab8540(ab8500))
sysfs_remove_group(&ab8500->dev->kobj, &ab9540_attr_group);
else
sysfs_remove_group(&ab8500->dev->kobj, &ab8500_attr_group);
+ if ((is_ab8505(ab8500) || is_ab9540(ab8500)) &&
+ ab8500->chip_id >= AB8500_CUT2P0)
+ sysfs_remove_group(&ab8500->dev->kobj, &ab8505_attr_group);
+
mfd_remove_devices(ab8500->dev);
return 0;
diff --git a/drivers/mfd/ab8500-debugfs.c b/drivers/mfd/ab8500-debugfs.c
index 45fe3c50eb03..b88bbbc15f1e 100644
--- a/drivers/mfd/ab8500-debugfs.c
+++ b/drivers/mfd/ab8500-debugfs.c
@@ -80,6 +80,7 @@
#include <linux/interrupt.h>
#include <linux/kobject.h>
#include <linux/slab.h>
+#include <linux/irq.h>
#include <linux/mfd/abx500.h>
#include <linux/mfd/abx500/ab8500.h>
@@ -90,6 +91,9 @@
#include <linux/ctype.h>
#endif
+/* TODO: this file should not reference IRQ_DB8500_AB8500! */
+#include <mach/irqs.h>
+
static u32 debug_bank;
static u32 debug_address;
@@ -101,6 +105,11 @@ static int num_irqs;
static struct device_attribute **dev_attr;
static char **event_name;
+static u8 avg_sample = SAMPLE_16;
+static u8 trig_edge = RISING_EDGE;
+static u8 conv_type = ADC_SW;
+static u8 trig_timer;
+
/**
* struct ab8500_reg_range
* @first: the first address of the range
@@ -150,7 +159,9 @@ static struct hwreg_cfg hwreg_cfg = {
#define AB8500_REV_REG 0x80
-static struct ab8500_prcmu_ranges debug_ranges[AB8500_NUM_BANKS] = {
+static struct ab8500_prcmu_ranges *debug_ranges;
+
+struct ab8500_prcmu_ranges ab8500_debug_ranges[AB8500_NUM_BANKS] = {
[0x0] = {
.num_ranges = 0,
.range = NULL,
@@ -354,7 +365,7 @@ static struct ab8500_prcmu_ranges debug_ranges[AB8500_NUM_BANKS] = {
},
{
.first = 0xf5,
- .last = 0xf6,
+ .last = 0xf6,
},
},
},
@@ -479,6 +490,781 @@ static struct ab8500_prcmu_ranges debug_ranges[AB8500_NUM_BANKS] = {
},
};
+struct ab8500_prcmu_ranges ab8505_debug_ranges[AB8500_NUM_BANKS] = {
+ [0x0] = {
+ .num_ranges = 0,
+ .range = NULL,
+ },
+ [AB8500_SYS_CTRL1_BLOCK] = {
+ .num_ranges = 5,
+ .range = (struct ab8500_reg_range[]) {
+ {
+ .first = 0x00,
+ .last = 0x04,
+ },
+ {
+ .first = 0x42,
+ .last = 0x42,
+ },
+ {
+ .first = 0x52,
+ .last = 0x52,
+ },
+ {
+ .first = 0x54,
+ .last = 0x57,
+ },
+ {
+ .first = 0x80,
+ .last = 0x83,
+ },
+ },
+ },
+ [AB8500_SYS_CTRL2_BLOCK] = {
+ .num_ranges = 5,
+ .range = (struct ab8500_reg_range[]) {
+ {
+ .first = 0x00,
+ .last = 0x0D,
+ },
+ {
+ .first = 0x0F,
+ .last = 0x17,
+ },
+ {
+ .first = 0x20,
+ .last = 0x20,
+ },
+ {
+ .first = 0x30,
+ .last = 0x30,
+ },
+ {
+ .first = 0x32,
+ .last = 0x3A,
+ },
+ },
+ },
+ [AB8500_REGU_CTRL1] = {
+ .num_ranges = 3,
+ .range = (struct ab8500_reg_range[]) {
+ {
+ .first = 0x00,
+ .last = 0x00,
+ },
+ {
+ .first = 0x03,
+ .last = 0x11,
+ },
+ {
+ .first = 0x80,
+ .last = 0x86,
+ },
+ },
+ },
+ [AB8500_REGU_CTRL2] = {
+ .num_ranges = 6,
+ .range = (struct ab8500_reg_range[]) {
+ {
+ .first = 0x00,
+ .last = 0x06,
+ },
+ {
+ .first = 0x08,
+ .last = 0x15,
+ },
+ {
+ .first = 0x17,
+ .last = 0x19,
+ },
+ {
+ .first = 0x1B,
+ .last = 0x1D,
+ },
+ {
+ .first = 0x1F,
+ .last = 0x30,
+ },
+ {
+ .first = 0x40,
+ .last = 0x48,
+ },
+ /* 0x80-0x8B is SIM registers and should
+ * not be accessed from here */
+ },
+ },
+ [AB8500_USB] = {
+ .num_ranges = 3,
+ .range = (struct ab8500_reg_range[]) {
+ {
+ .first = 0x80,
+ .last = 0x83,
+ },
+ {
+ .first = 0x87,
+ .last = 0x8A,
+ },
+ {
+ .first = 0x91,
+ .last = 0x94,
+ },
+ },
+ },
+ [AB8500_TVOUT] = {
+ .num_ranges = 0,
+ .range = NULL,
+ },
+ [AB8500_DBI] = {
+ .num_ranges = 0,
+ .range = NULL,
+ },
+ [AB8500_ECI_AV_ACC] = {
+ .num_ranges = 1,
+ .range = (struct ab8500_reg_range[]) {
+ {
+ .first = 0x80,
+ .last = 0x82,
+ },
+ },
+ },
+ [AB8500_RESERVED] = {
+ .num_ranges = 0,
+ .range = NULL,
+ },
+ [AB8500_GPADC] = {
+ .num_ranges = 1,
+ .range = (struct ab8500_reg_range[]) {
+ {
+ .first = 0x00,
+ .last = 0x08,
+ },
+ },
+ },
+ [AB8500_CHARGER] = {
+ .num_ranges = 9,
+ .range = (struct ab8500_reg_range[]) {
+ {
+ .first = 0x02,
+ .last = 0x03,
+ },
+ {
+ .first = 0x05,
+ .last = 0x05,
+ },
+ {
+ .first = 0x40,
+ .last = 0x44,
+ },
+ {
+ .first = 0x50,
+ .last = 0x57,
+ },
+ {
+ .first = 0x60,
+ .last = 0x60,
+ },
+ {
+ .first = 0xA0,
+ .last = 0xA7,
+ },
+ {
+ .first = 0xAF,
+ .last = 0xB2,
+ },
+ {
+ .first = 0xC0,
+ .last = 0xC2,
+ },
+ {
+ .first = 0xF5,
+ .last = 0xF5,
+ },
+ },
+ },
+ [AB8500_GAS_GAUGE] = {
+ .num_ranges = 3,
+ .range = (struct ab8500_reg_range[]) {
+ {
+ .first = 0x00,
+ .last = 0x00,
+ },
+ {
+ .first = 0x07,
+ .last = 0x0A,
+ },
+ {
+ .first = 0x10,
+ .last = 0x14,
+ },
+ },
+ },
+ [AB8500_AUDIO] = {
+ .num_ranges = 1,
+ .range = (struct ab8500_reg_range[]) {
+ {
+ .first = 0x00,
+ .last = 0x83,
+ },
+ },
+ },
+ [AB8500_INTERRUPT] = {
+ .num_ranges = 11,
+ .range = (struct ab8500_reg_range[]) {
+ {
+ .first = 0x00,
+ .last = 0x04,
+ },
+ {
+ .first = 0x06,
+ .last = 0x07,
+ },
+ {
+ .first = 0x09,
+ .last = 0x09,
+ },
+ {
+ .first = 0x0B,
+ .last = 0x0C,
+ },
+ {
+ .first = 0x12,
+ .last = 0x15,
+ },
+ {
+ .first = 0x18,
+ .last = 0x18,
+ },
+ /* Latch registers should not be read here */
+ {
+ .first = 0x40,
+ .last = 0x44,
+ },
+ {
+ .first = 0x46,
+ .last = 0x49,
+ },
+ {
+ .first = 0x4B,
+ .last = 0x4D,
+ },
+ {
+ .first = 0x52,
+ .last = 0x55,
+ },
+ {
+ .first = 0x58,
+ .last = 0x58,
+ },
+ /* LatchHier registers should not be read here */
+ },
+ },
+ [AB8500_RTC] = {
+ .num_ranges = 2,
+ .range = (struct ab8500_reg_range[]) {
+ {
+ .first = 0x00,
+ .last = 0x14,
+ },
+ {
+ .first = 0x16,
+ .last = 0x17,
+ },
+ },
+ },
+ [AB8500_MISC] = {
+ .num_ranges = 8,
+ .range = (struct ab8500_reg_range[]) {
+ {
+ .first = 0x00,
+ .last = 0x06,
+ },
+ {
+ .first = 0x10,
+ .last = 0x16,
+ },
+ {
+ .first = 0x20,
+ .last = 0x26,
+ },
+ {
+ .first = 0x30,
+ .last = 0x36,
+ },
+ {
+ .first = 0x40,
+ .last = 0x46,
+ },
+ {
+ .first = 0x50,
+ .last = 0x50,
+ },
+ {
+ .first = 0x60,
+ .last = 0x6B,
+ },
+ {
+ .first = 0x80,
+ .last = 0x82,
+ },
+ },
+ },
+ [AB8500_DEVELOPMENT] = {
+ .num_ranges = 2,
+ .range = (struct ab8500_reg_range[]) {
+ {
+ .first = 0x00,
+ .last = 0x00,
+ },
+ {
+ .first = 0x05,
+ .last = 0x05,
+ },
+ },
+ },
+ [AB8500_DEBUG] = {
+ .num_ranges = 1,
+ .range = (struct ab8500_reg_range[]) {
+ {
+ .first = 0x05,
+ .last = 0x07,
+ },
+ },
+ },
+ [AB8500_PROD_TEST] = {
+ .num_ranges = 0,
+ .range = NULL,
+ },
+ [AB8500_STE_TEST] = {
+ .num_ranges = 0,
+ .range = NULL,
+ },
+ [AB8500_OTP_EMUL] = {
+ .num_ranges = 1,
+ .range = (struct ab8500_reg_range[]) {
+ {
+ .first = 0x01,
+ .last = 0x15,
+ },
+ },
+ },
+};
+
+struct ab8500_prcmu_ranges ab8540_debug_ranges[AB8500_NUM_BANKS] = {
+ [AB8500_M_FSM_RANK] = {
+ .num_ranges = 1,
+ .range = (struct ab8500_reg_range[]) {
+ {
+ .first = 0x00,
+ .last = 0x0B,
+ },
+ },
+ },
+ [AB8500_SYS_CTRL1_BLOCK] = {
+ .num_ranges = 6,
+ .range = (struct ab8500_reg_range[]) {
+ {
+ .first = 0x00,
+ .last = 0x04,
+ },
+ {
+ .first = 0x42,
+ .last = 0x42,
+ },
+ {
+ .first = 0x50,
+ .last = 0x54,
+ },
+ {
+ .first = 0x57,
+ .last = 0x57,
+ },
+ {
+ .first = 0x80,
+ .last = 0x83,
+ },
+ {
+ .first = 0x90,
+ .last = 0x90,
+ },
+ },
+ },
+ [AB8500_SYS_CTRL2_BLOCK] = {
+ .num_ranges = 5,
+ .range = (struct ab8500_reg_range[]) {
+ {
+ .first = 0x00,
+ .last = 0x0D,
+ },
+ {
+ .first = 0x0F,
+ .last = 0x10,
+ },
+ {
+ .first = 0x20,
+ .last = 0x21,
+ },
+ {
+ .first = 0x32,
+ .last = 0x3C,
+ },
+ {
+ .first = 0x40,
+ .last = 0x42,
+ },
+ },
+ },
+ [AB8500_REGU_CTRL1] = {
+ .num_ranges = 4,
+ .range = (struct ab8500_reg_range[]) {
+ {
+ .first = 0x03,
+ .last = 0x15,
+ },
+ {
+ .first = 0x20,
+ .last = 0x20,
+ },
+ {
+ .first = 0x80,
+ .last = 0x85,
+ },
+ {
+ .first = 0x87,
+ .last = 0x88,
+ },
+ },
+ },
+ [AB8500_REGU_CTRL2] = {
+ .num_ranges = 8,
+ .range = (struct ab8500_reg_range[]) {
+ {
+ .first = 0x00,
+ .last = 0x06,
+ },
+ {
+ .first = 0x08,
+ .last = 0x15,
+ },
+ {
+ .first = 0x17,
+ .last = 0x19,
+ },
+ {
+ .first = 0x1B,
+ .last = 0x1D,
+ },
+ {
+ .first = 0x1F,
+ .last = 0x2F,
+ },
+ {
+ .first = 0x31,
+ .last = 0x3A,
+ },
+ {
+ .first = 0x43,
+ .last = 0x44,
+ },
+ {
+ .first = 0x48,
+ .last = 0x49,
+ },
+ },
+ },
+ [AB8500_USB] = {
+ .num_ranges = 3,
+ .range = (struct ab8500_reg_range[]) {
+ {
+ .first = 0x80,
+ .last = 0x83,
+ },
+ {
+ .first = 0x87,
+ .last = 0x8A,
+ },
+ {
+ .first = 0x91,
+ .last = 0x94,
+ },
+ },
+ },
+ [AB8500_TVOUT] = {
+ .num_ranges = 0,
+ .range = NULL
+ },
+ [AB8500_DBI] = {
+ .num_ranges = 4,
+ .range = (struct ab8500_reg_range[]) {
+ {
+ .first = 0x00,
+ .last = 0x07,
+ },
+ {
+ .first = 0x10,
+ .last = 0x11,
+ },
+ {
+ .first = 0x20,
+ .last = 0x21,
+ },
+ {
+ .first = 0x30,
+ .last = 0x43,
+ },
+ },
+ },
+ [AB8500_ECI_AV_ACC] = {
+ .num_ranges = 2,
+ .range = (struct ab8500_reg_range[]) {
+ {
+ .first = 0x00,
+ .last = 0x03,
+ },
+ {
+ .first = 0x80,
+ .last = 0x82,
+ },
+ },
+ },
+ [AB8500_RESERVED] = {
+ .num_ranges = 0,
+ .range = NULL,
+ },
+ [AB8500_GPADC] = {
+ .num_ranges = 4,
+ .range = (struct ab8500_reg_range[]) {
+ {
+ .first = 0x00,
+ .last = 0x01,
+ },
+ {
+ .first = 0x04,
+ .last = 0x06,
+ },
+ {
+ .first = 0x09,
+ .last = 0x0A,
+ },
+ {
+ .first = 0x10,
+ .last = 0x14,
+ },
+ },
+ },
+ [AB8500_CHARGER] = {
+ .num_ranges = 10,
+ .range = (struct ab8500_reg_range[]) {
+ {
+ .first = 0x00,
+ .last = 0x00,
+ },
+ {
+ .first = 0x02,
+ .last = 0x05,
+ },
+ {
+ .first = 0x40,
+ .last = 0x44,
+ },
+ {
+ .first = 0x50,
+ .last = 0x57,
+ },
+ {
+ .first = 0x60,
+ .last = 0x60,
+ },
+ {
+ .first = 0x70,
+ .last = 0x70,
+ },
+ {
+ .first = 0xA0,
+ .last = 0xA9,
+ },
+ {
+ .first = 0xAF,
+ .last = 0xB2,
+ },
+ {
+ .first = 0xC0,
+ .last = 0xC6,
+ },
+ {
+ .first = 0xF5,
+ .last = 0xF5,
+ },
+ },
+ },
+ [AB8500_GAS_GAUGE] = {
+ .num_ranges = 3,
+ .range = (struct ab8500_reg_range[]) {
+ {
+ .first = 0x00,
+ .last = 0x00,
+ },
+ {
+ .first = 0x07,
+ .last = 0x0A,
+ },
+ {
+ .first = 0x10,
+ .last = 0x14,
+ },
+ },
+ },
+ [AB8500_AUDIO] = {
+ .num_ranges = 1,
+ .range = (struct ab8500_reg_range[]) {
+ {
+ .first = 0x00,
+ .last = 0x9f,
+ },
+ },
+ },
+ [AB8500_INTERRUPT] = {
+ .num_ranges = 6,
+ .range = (struct ab8500_reg_range[]) {
+ {
+ .first = 0x00,
+ .last = 0x05,
+ },
+ {
+ .first = 0x0B,
+ .last = 0x0D,
+ },
+ {
+ .first = 0x12,
+ .last = 0x20,
+ },
+ /* Latch registers should not be read here */
+ {
+ .first = 0x40,
+ .last = 0x45,
+ },
+ {
+ .first = 0x4B,
+ .last = 0x4D,
+ },
+ {
+ .first = 0x52,
+ .last = 0x60,
+ },
+ /* LatchHier registers should not be read here */
+ },
+ },
+ [AB8500_RTC] = {
+ .num_ranges = 3,
+ .range = (struct ab8500_reg_range[]) {
+ {
+ .first = 0x00,
+ .last = 0x07,
+ },
+ {
+ .first = 0x0B,
+ .last = 0x18,
+ },
+ {
+ .first = 0x20,
+ .last = 0x25,
+ },
+ },
+ },
+ [AB8500_MISC] = {
+ .num_ranges = 9,
+ .range = (struct ab8500_reg_range[]) {
+ {
+ .first = 0x00,
+ .last = 0x06,
+ },
+ {
+ .first = 0x10,
+ .last = 0x16,
+ },
+ {
+ .first = 0x20,
+ .last = 0x26,
+ },
+ {
+ .first = 0x30,
+ .last = 0x36,
+ },
+ {
+ .first = 0x40,
+ .last = 0x49,
+ },
+ {
+ .first = 0x50,
+ .last = 0x50,
+ },
+ {
+ .first = 0x60,
+ .last = 0x6B,
+ },
+ {
+ .first = 0x70,
+ .last = 0x74,
+ },
+ {
+ .first = 0x80,
+ .last = 0x82,
+ },
+ },
+ },
+ [AB8500_DEVELOPMENT] = {
+ .num_ranges = 3,
+ .range = (struct ab8500_reg_range[]) {
+ {
+ .first = 0x00,
+ .last = 0x01,
+ },
+ {
+ .first = 0x06,
+ .last = 0x06,
+ },
+ {
+ .first = 0x10,
+ .last = 0x21,
+ },
+ },
+ },
+ [AB8500_DEBUG] = {
+ .num_ranges = 3,
+ .range = (struct ab8500_reg_range[]) {
+ {
+ .first = 0x01,
+ .last = 0x0C,
+ },
+ {
+ .first = 0x0E,
+ .last = 0x11,
+ },
+ {
+ .first = 0x80,
+ .last = 0x81,
+ },
+ },
+ },
+ [AB8500_PROD_TEST] = {
+ .num_ranges = 0,
+ .range = NULL,
+ },
+ [AB8500_STE_TEST] = {
+ .num_ranges = 0,
+ .range = NULL,
+ },
+ [AB8500_OTP_EMUL] = {
+ .num_ranges = 1,
+ .range = (struct ab8500_reg_range[]) {
+ {
+ .first = 0x00,
+ .last = 0x3F,
+ },
+ },
+ },
+};
+
+
static irqreturn_t ab8500_debug_handler(int irq, void *data)
{
char buf[16];
@@ -520,19 +1306,16 @@ static int ab8500_registers_print(struct device *dev, u32 bank,
}
if (s) {
- err = seq_printf(s, " [%u/0x%02X]: 0x%02X\n",
+ err = seq_printf(s, " [0x%02X/0x%02X]: 0x%02X\n",
bank, reg, value);
if (err < 0) {
- dev_err(dev,
- "seq_printf overflow bank=%d reg=%d\n",
- bank, reg);
/* Error is not returned here since
* the output is wanted in any case */
return 0;
}
} else {
- printk(KERN_INFO" [%u/0x%02X]: 0x%02X\n", bank,
- reg, value);
+ printk(KERN_INFO" [0x%02X/0x%02X]: 0x%02X\n",
+ bank, reg, value);
}
}
}
@@ -546,7 +1329,7 @@ static int ab8500_print_bank_registers(struct seq_file *s, void *p)
seq_printf(s, AB8500_NAME_STRING " register values:\n");
- seq_printf(s, " bank %u:\n", bank);
+ seq_printf(s, " bank 0x%02X:\n", bank);
ab8500_registers_print(dev, bank, s);
return 0;
@@ -573,10 +1356,8 @@ static int ab8500_print_all_banks(struct seq_file *s, void *p)
seq_printf(s, AB8500_NAME_STRING " register values:\n");
- for (i = 1; i < AB8500_NUM_BANKS; i++) {
- err = seq_printf(s, " bank %u:\n", i);
- if (err < 0)
- dev_err(dev, "seq_printf overflow, bank=%d\n", i);
+ for (i = 0; i < AB8500_NUM_BANKS; i++) {
+ err = seq_printf(s, " bank 0x%02X:\n", i);
ab8500_registers_print(dev, i, s);
}
@@ -591,11 +1372,68 @@ void ab8500_dump_all_banks(struct device *dev)
printk(KERN_INFO"ab8500 register values:\n");
for (i = 1; i < AB8500_NUM_BANKS; i++) {
- printk(KERN_INFO" bank %u:\n", i);
+ printk(KERN_INFO" bank 0x%02X:\n", i);
ab8500_registers_print(dev, i, NULL);
}
}
+/* Space for 500 registers. */
+#define DUMP_MAX_REGS 700
+struct ab8500_register_dump
+{
+ u8 bank;
+ u8 reg;
+ u8 value;
+} ab8500_complete_register_dump[DUMP_MAX_REGS];
+
+extern int prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size);
+
+/* This shall only be called upon kernel panic! */
+void ab8500_dump_all_banks_to_mem(void)
+{
+ int i, r = 0;
+ u8 bank;
+ int err = 0;
+
+ pr_info("Saving all ABB registers at \"ab8500_complete_register_dump\" "
+ "for crash analyze.\n");
+
+ for (bank = 0; bank < AB8500_NUM_BANKS; bank++) {
+ for (i = 0; i < debug_ranges[bank].num_ranges; i++) {
+ u8 reg;
+
+ for (reg = debug_ranges[bank].range[i].first;
+ reg <= debug_ranges[bank].range[i].last;
+ reg++) {
+ u8 value;
+
+ err = prcmu_abb_read(bank, reg, &value, 1);
+
+ if (err < 0)
+ goto out;
+
+ ab8500_complete_register_dump[r].bank = bank;
+ ab8500_complete_register_dump[r].reg = reg;
+ ab8500_complete_register_dump[r].value = value;
+
+ r++;
+
+ if (r >= DUMP_MAX_REGS) {
+ pr_err("%s: too many register to dump!\n",
+ __func__);
+ err = -EINVAL;
+ goto out;
+ }
+ }
+ }
+ }
+out:
+ if (err >= 0)
+ pr_info("Saved all ABB registers.\n");
+ else
+ pr_info("Failed to save all ABB registers.\n");
+}
+
static int ab8500_all_banks_open(struct inode *inode, struct file *file)
{
struct seq_file *s;
@@ -625,7 +1463,7 @@ static const struct file_operations ab8500_all_banks_fops = {
static int ab8500_bank_print(struct seq_file *s, void *p)
{
- return seq_printf(s, "%d\n", debug_bank);
+ return seq_printf(s, "0x%02X\n", debug_bank);
}
static int ab8500_bank_open(struct inode *inode, struct file *file)
@@ -641,7 +1479,6 @@ static ssize_t ab8500_bank_write(struct file *file,
unsigned long user_bank;
int err;
- /* Get userspace string and assure termination */
err = kstrtoul_from_user(user_buf, count, 0, &user_bank);
if (err)
return err;
@@ -667,14 +1504,13 @@ static int ab8500_address_open(struct inode *inode, struct file *file)
}
static ssize_t ab8500_address_write(struct file *file,
- const char __user *user_buf,
- size_t count, loff_t *ppos)
+ const char __user *user_buf,
+ size_t count, loff_t *ppos)
{
struct device *dev = ((struct seq_file *)(file->private_data))->private;
unsigned long user_address;
int err;
- /* Get userspace string and assure termination */
err = kstrtoul_from_user(user_buf, count, 0, &user_address);
if (err)
return err;
@@ -684,6 +1520,7 @@ static ssize_t ab8500_address_write(struct file *file,
return -EINVAL;
}
debug_address = user_address;
+
return count;
}
@@ -711,14 +1548,13 @@ static int ab8500_val_open(struct inode *inode, struct file *file)
}
static ssize_t ab8500_val_write(struct file *file,
- const char __user *user_buf,
- size_t count, loff_t *ppos)
+ const char __user *user_buf,
+ size_t count, loff_t *ppos)
{
struct device *dev = ((struct seq_file *)(file->private_data))->private;
unsigned long user_val;
int err;
- /* Get userspace string and assure termination */
err = kstrtoul_from_user(user_buf, count, 0, &user_val);
if (err)
return err;
@@ -741,22 +1577,46 @@ static ssize_t ab8500_val_write(struct file *file,
* Interrupt status
*/
static u32 num_interrupts[AB8500_MAX_NR_IRQS];
+static u32 num_wake_interrupts[AB8500_MAX_NR_IRQS];
static int num_interrupt_lines;
+bool __attribute__((weak)) suspend_test_wake_cause_interrupt_is_mine(u32 my_int)
+{
+ return false;
+}
+
void ab8500_debug_register_interrupt(int line)
{
- if (line < num_interrupt_lines)
+ if (line < num_interrupt_lines) {
num_interrupts[line]++;
+ if (suspend_test_wake_cause_interrupt_is_mine(IRQ_DB8500_AB8500))
+ num_wake_interrupts[line]++;
+ }
}
static int ab8500_interrupts_print(struct seq_file *s, void *p)
{
int line;
- seq_printf(s, "irq: number of\n");
+ seq_printf(s, "name: number: number of: wake:\n");
- for (line = 0; line < num_interrupt_lines; line++)
- seq_printf(s, "%3i: %6i\n", line, num_interrupts[line]);
+ for (line = 0; line < num_interrupt_lines; line++) {
+ struct irq_desc *desc = irq_to_desc(line + irq_first);
+ struct irqaction *action = desc->action;
+
+ seq_printf(s, "%3i: %6i %4i", line,
+ num_interrupts[line],
+ num_wake_interrupts[line]);
+
+ if (desc && desc->name)
+ seq_printf(s, "-%-8s", desc->name);
+ if (action) {
+ seq_printf(s, " %s", action->name);
+ while ((action = action->next) != NULL)
+ seq_printf(s, ", %s", action->name);
+ }
+ seq_putc(s, '\n');
+ }
return 0;
}
@@ -801,6 +1661,79 @@ static int ab8500_hwreg_open(struct inode *inode, struct file *file)
return single_open(file, ab8500_hwreg_print, inode->i_private);
}
+#define AB8500_SUPPLY_CONTROL_CONFIG_1 0x01
+#define AB8500_SUPPLY_CONTROL_REG 0x00
+#define AB8500_FIRST_SIM_REG 0x80
+#define AB8500_LAST_SIM_REG 0x8B
+#define AB8505_LAST_SIM_REG 0x8C
+
+static int ab8500_print_modem_registers(struct seq_file *s, void *p)
+{
+ struct device *dev = s->private;
+ struct ab8500 *ab8500;
+ int err;
+ u8 value;
+ u8 orig_value;
+ u32 bank = AB8500_REGU_CTRL2;
+ u32 last_sim_reg = AB8500_LAST_SIM_REG;
+ u32 reg;
+
+ ab8500 = dev_get_drvdata(dev->parent);
+ dev_warn(dev, "WARNING! This operation can interfer with modem side\n"
+ "and should only be done with care\n");
+
+ err = abx500_get_register_interruptible(dev,
+ AB8500_REGU_CTRL1, AB8500_SUPPLY_CONTROL_REG, &orig_value);
+ if (err < 0) {
+ dev_err(dev, "ab->read fail %d\n", err);
+ return err;
+ }
+ /* Config 1 will allow APE side to read SIM registers */
+ err = abx500_set_register_interruptible(dev,
+ AB8500_REGU_CTRL1, AB8500_SUPPLY_CONTROL_REG,
+ AB8500_SUPPLY_CONTROL_CONFIG_1);
+ if (err < 0) {
+ dev_err(dev, "ab->write fail %d\n", err);
+ return err;
+ }
+
+ seq_printf(s, " bank 0x%02X:\n", bank);
+
+ if (is_ab9540(ab8500) || is_ab8505(ab8500))
+ last_sim_reg = AB8505_LAST_SIM_REG;
+
+ for (reg = AB8500_FIRST_SIM_REG; reg <= last_sim_reg; reg++) {
+ err = abx500_get_register_interruptible(dev,
+ bank, reg, &value);
+ if (err < 0) {
+ dev_err(dev, "ab->read fail %d\n", err);
+ return err;
+ }
+ err = seq_printf(s, " [0x%02X/0x%02X]: 0x%02X\n",
+ bank, reg, value);
+ }
+ err = abx500_set_register_interruptible(dev,
+ AB8500_REGU_CTRL1, AB8500_SUPPLY_CONTROL_REG, orig_value);
+ if (err < 0) {
+ dev_err(dev, "ab->write fail %d\n", err);
+ return err;
+ }
+ return 0;
+}
+
+static int ab8500_modem_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, ab8500_print_modem_registers, inode->i_private);
+}
+
+static const struct file_operations ab8500_modem_fops = {
+ .open = ab8500_modem_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+ .owner = THIS_MODULE,
+};
+
static int ab8500_gpadc_bat_ctrl_print(struct seq_file *s, void *p)
{
int bat_ctrl_raw;
@@ -808,12 +1741,13 @@ static int ab8500_gpadc_bat_ctrl_print(struct seq_file *s, void *p)
struct ab8500_gpadc *gpadc;
gpadc = ab8500_gpadc_get("ab8500-gpadc.0");
- bat_ctrl_raw = ab8500_gpadc_read_raw(gpadc, BAT_CTRL);
+ bat_ctrl_raw = ab8500_gpadc_read_raw(gpadc, BAT_CTRL,
+ avg_sample, trig_edge, trig_timer, conv_type);
bat_ctrl_convert = ab8500_gpadc_ad_to_voltage(gpadc,
- BAT_CTRL, bat_ctrl_raw);
+ BAT_CTRL, bat_ctrl_raw);
return seq_printf(s, "%d,0x%X\n",
- bat_ctrl_convert, bat_ctrl_raw);
+ bat_ctrl_convert, bat_ctrl_raw);
}
static int ab8500_gpadc_bat_ctrl_open(struct inode *inode, struct file *file)
@@ -836,16 +1770,17 @@ static int ab8500_gpadc_btemp_ball_print(struct seq_file *s, void *p)
struct ab8500_gpadc *gpadc;
gpadc = ab8500_gpadc_get("ab8500-gpadc.0");
- btemp_ball_raw = ab8500_gpadc_read_raw(gpadc, BTEMP_BALL);
+ btemp_ball_raw = ab8500_gpadc_read_raw(gpadc, BTEMP_BALL,
+ avg_sample, trig_edge, trig_timer, conv_type);
btemp_ball_convert = ab8500_gpadc_ad_to_voltage(gpadc, BTEMP_BALL,
- btemp_ball_raw);
+ btemp_ball_raw);
return seq_printf(s,
- "%d,0x%X\n", btemp_ball_convert, btemp_ball_raw);
+ "%d,0x%X\n", btemp_ball_convert, btemp_ball_raw);
}
static int ab8500_gpadc_btemp_ball_open(struct inode *inode,
- struct file *file)
+ struct file *file)
{
return single_open(file, ab8500_gpadc_btemp_ball_print, inode->i_private);
}
@@ -865,19 +1800,20 @@ static int ab8500_gpadc_main_charger_v_print(struct seq_file *s, void *p)
struct ab8500_gpadc *gpadc;
gpadc = ab8500_gpadc_get("ab8500-gpadc.0");
- main_charger_v_raw = ab8500_gpadc_read_raw(gpadc, MAIN_CHARGER_V);
+ main_charger_v_raw = ab8500_gpadc_read_raw(gpadc, MAIN_CHARGER_V,
+ avg_sample, trig_edge, trig_timer, conv_type);
main_charger_v_convert = ab8500_gpadc_ad_to_voltage(gpadc,
- MAIN_CHARGER_V, main_charger_v_raw);
+ MAIN_CHARGER_V, main_charger_v_raw);
return seq_printf(s, "%d,0x%X\n",
main_charger_v_convert, main_charger_v_raw);
}
static int ab8500_gpadc_main_charger_v_open(struct inode *inode,
- struct file *file)
+ struct file *file)
{
return single_open(file, ab8500_gpadc_main_charger_v_print,
- inode->i_private);
+ inode->i_private);
}
static const struct file_operations ab8500_gpadc_main_charger_v_fops = {
@@ -895,19 +1831,20 @@ static int ab8500_gpadc_acc_detect1_print(struct seq_file *s, void *p)
struct ab8500_gpadc *gpadc;
gpadc = ab8500_gpadc_get("ab8500-gpadc.0");
- acc_detect1_raw = ab8500_gpadc_read_raw(gpadc, ACC_DETECT1);
+ acc_detect1_raw = ab8500_gpadc_read_raw(gpadc, ACC_DETECT1,
+ avg_sample, trig_edge, trig_timer, conv_type);
acc_detect1_convert = ab8500_gpadc_ad_to_voltage(gpadc, ACC_DETECT1,
- acc_detect1_raw);
+ acc_detect1_raw);
return seq_printf(s, "%d,0x%X\n",
- acc_detect1_convert, acc_detect1_raw);
+ acc_detect1_convert, acc_detect1_raw);
}
static int ab8500_gpadc_acc_detect1_open(struct inode *inode,
- struct file *file)
+ struct file *file)
{
return single_open(file, ab8500_gpadc_acc_detect1_print,
- inode->i_private);
+ inode->i_private);
}
static const struct file_operations ab8500_gpadc_acc_detect1_fops = {
@@ -925,19 +1862,20 @@ static int ab8500_gpadc_acc_detect2_print(struct seq_file *s, void *p)
struct ab8500_gpadc *gpadc;
gpadc = ab8500_gpadc_get("ab8500-gpadc.0");
- acc_detect2_raw = ab8500_gpadc_read_raw(gpadc, ACC_DETECT2);
+ acc_detect2_raw = ab8500_gpadc_read_raw(gpadc, ACC_DETECT2,
+ avg_sample, trig_edge, trig_timer, conv_type);
acc_detect2_convert = ab8500_gpadc_ad_to_voltage(gpadc,
- ACC_DETECT2, acc_detect2_raw);
+ ACC_DETECT2, acc_detect2_raw);
return seq_printf(s, "%d,0x%X\n",
- acc_detect2_convert, acc_detect2_raw);
+ acc_detect2_convert, acc_detect2_raw);
}
static int ab8500_gpadc_acc_detect2_open(struct inode *inode,
struct file *file)
{
return single_open(file, ab8500_gpadc_acc_detect2_print,
- inode->i_private);
+ inode->i_private);
}
static const struct file_operations ab8500_gpadc_acc_detect2_fops = {
@@ -955,12 +1893,13 @@ static int ab8500_gpadc_aux1_print(struct seq_file *s, void *p)
struct ab8500_gpadc *gpadc;
gpadc = ab8500_gpadc_get("ab8500-gpadc.0");
- aux1_raw = ab8500_gpadc_read_raw(gpadc, ADC_AUX1);
+ aux1_raw = ab8500_gpadc_read_raw(gpadc, ADC_AUX1,
+ avg_sample, trig_edge, trig_timer, conv_type);
aux1_convert = ab8500_gpadc_ad_to_voltage(gpadc, ADC_AUX1,
- aux1_raw);
+ aux1_raw);
return seq_printf(s, "%d,0x%X\n",
- aux1_convert, aux1_raw);
+ aux1_convert, aux1_raw);
}
static int ab8500_gpadc_aux1_open(struct inode *inode, struct file *file)
@@ -983,9 +1922,10 @@ static int ab8500_gpadc_aux2_print(struct seq_file *s, void *p)
struct ab8500_gpadc *gpadc;
gpadc = ab8500_gpadc_get("ab8500-gpadc.0");
- aux2_raw = ab8500_gpadc_read_raw(gpadc, ADC_AUX2);
+ aux2_raw = ab8500_gpadc_read_raw(gpadc, ADC_AUX2,
+ avg_sample, trig_edge, trig_timer, conv_type);
aux2_convert = ab8500_gpadc_ad_to_voltage(gpadc, ADC_AUX2,
- aux2_raw);
+ aux2_raw);
return seq_printf(s, "%d,0x%X\n",
aux2_convert, aux2_raw);
@@ -1011,16 +1951,17 @@ static int ab8500_gpadc_main_bat_v_print(struct seq_file *s, void *p)
struct ab8500_gpadc *gpadc;
gpadc = ab8500_gpadc_get("ab8500-gpadc.0");
- main_bat_v_raw = ab8500_gpadc_read_raw(gpadc, MAIN_BAT_V);
+ main_bat_v_raw = ab8500_gpadc_read_raw(gpadc, MAIN_BAT_V,
+ avg_sample, trig_edge, trig_timer, conv_type);
main_bat_v_convert = ab8500_gpadc_ad_to_voltage(gpadc, MAIN_BAT_V,
- main_bat_v_raw);
+ main_bat_v_raw);
return seq_printf(s, "%d,0x%X\n",
- main_bat_v_convert, main_bat_v_raw);
+ main_bat_v_convert, main_bat_v_raw);
}
static int ab8500_gpadc_main_bat_v_open(struct inode *inode,
- struct file *file)
+ struct file *file)
{
return single_open(file, ab8500_gpadc_main_bat_v_print, inode->i_private);
}
@@ -1040,12 +1981,13 @@ static int ab8500_gpadc_vbus_v_print(struct seq_file *s, void *p)
struct ab8500_gpadc *gpadc;
gpadc = ab8500_gpadc_get("ab8500-gpadc.0");
- vbus_v_raw = ab8500_gpadc_read_raw(gpadc, VBUS_V);
+ vbus_v_raw = ab8500_gpadc_read_raw(gpadc, VBUS_V,
+ avg_sample, trig_edge, trig_timer, conv_type);
vbus_v_convert = ab8500_gpadc_ad_to_voltage(gpadc, VBUS_V,
- vbus_v_raw);
+ vbus_v_raw);
return seq_printf(s, "%d,0x%X\n",
- vbus_v_convert, vbus_v_raw);
+ vbus_v_convert, vbus_v_raw);
}
static int ab8500_gpadc_vbus_v_open(struct inode *inode, struct file *file)
@@ -1068,19 +2010,20 @@ static int ab8500_gpadc_main_charger_c_print(struct seq_file *s, void *p)
struct ab8500_gpadc *gpadc;
gpadc = ab8500_gpadc_get("ab8500-gpadc.0");
- main_charger_c_raw = ab8500_gpadc_read_raw(gpadc, MAIN_CHARGER_C);
+ main_charger_c_raw = ab8500_gpadc_read_raw(gpadc, MAIN_CHARGER_C,
+ avg_sample, trig_edge, trig_timer, conv_type);
main_charger_c_convert = ab8500_gpadc_ad_to_voltage(gpadc,
- MAIN_CHARGER_C, main_charger_c_raw);
+ MAIN_CHARGER_C, main_charger_c_raw);
return seq_printf(s, "%d,0x%X\n",
- main_charger_c_convert, main_charger_c_raw);
+ main_charger_c_convert, main_charger_c_raw);
}
static int ab8500_gpadc_main_charger_c_open(struct inode *inode,
struct file *file)
{
return single_open(file, ab8500_gpadc_main_charger_c_print,
- inode->i_private);
+ inode->i_private);
}
static const struct file_operations ab8500_gpadc_main_charger_c_fops = {
@@ -1098,19 +2041,20 @@ static int ab8500_gpadc_usb_charger_c_print(struct seq_file *s, void *p)
struct ab8500_gpadc *gpadc;
gpadc = ab8500_gpadc_get("ab8500-gpadc.0");
- usb_charger_c_raw = ab8500_gpadc_read_raw(gpadc, USB_CHARGER_C);
+ usb_charger_c_raw = ab8500_gpadc_read_raw(gpadc, USB_CHARGER_C,
+ avg_sample, trig_edge, trig_timer, conv_type);
usb_charger_c_convert = ab8500_gpadc_ad_to_voltage(gpadc,
- USB_CHARGER_C, usb_charger_c_raw);
+ USB_CHARGER_C, usb_charger_c_raw);
return seq_printf(s, "%d,0x%X\n",
- usb_charger_c_convert, usb_charger_c_raw);
+ usb_charger_c_convert, usb_charger_c_raw);
}
static int ab8500_gpadc_usb_charger_c_open(struct inode *inode,
struct file *file)
{
return single_open(file, ab8500_gpadc_usb_charger_c_print,
- inode->i_private);
+ inode->i_private);
}
static const struct file_operations ab8500_gpadc_usb_charger_c_fops = {
@@ -1128,12 +2072,13 @@ static int ab8500_gpadc_bk_bat_v_print(struct seq_file *s, void *p)
struct ab8500_gpadc *gpadc;
gpadc = ab8500_gpadc_get("ab8500-gpadc.0");
- bk_bat_v_raw = ab8500_gpadc_read_raw(gpadc, BK_BAT_V);
+ bk_bat_v_raw = ab8500_gpadc_read_raw(gpadc, BK_BAT_V,
+ avg_sample, trig_edge, trig_timer, conv_type);
bk_bat_v_convert = ab8500_gpadc_ad_to_voltage(gpadc,
- BK_BAT_V, bk_bat_v_raw);
+ BK_BAT_V, bk_bat_v_raw);
return seq_printf(s, "%d,0x%X\n",
- bk_bat_v_convert, bk_bat_v_raw);
+ bk_bat_v_convert, bk_bat_v_raw);
}
static int ab8500_gpadc_bk_bat_v_open(struct inode *inode, struct file *file)
@@ -1156,12 +2101,13 @@ static int ab8500_gpadc_die_temp_print(struct seq_file *s, void *p)
struct ab8500_gpadc *gpadc;
gpadc = ab8500_gpadc_get("ab8500-gpadc.0");
- die_temp_raw = ab8500_gpadc_read_raw(gpadc, DIE_TEMP);
+ die_temp_raw = ab8500_gpadc_read_raw(gpadc, DIE_TEMP,
+ avg_sample, trig_edge, trig_timer, conv_type);
die_temp_convert = ab8500_gpadc_ad_to_voltage(gpadc, DIE_TEMP,
- die_temp_raw);
+ die_temp_raw);
return seq_printf(s, "%d,0x%X\n",
- die_temp_convert, die_temp_raw);
+ die_temp_convert, die_temp_raw);
}
static int ab8500_gpadc_die_temp_open(struct inode *inode, struct file *file)
@@ -1177,6 +2123,453 @@ static const struct file_operations ab8500_gpadc_die_temp_fops = {
.owner = THIS_MODULE,
};
+static int ab8500_gpadc_usb_id_print(struct seq_file *s, void *p)
+{
+ int usb_id_raw;
+ int usb_id_convert;
+ struct ab8500_gpadc *gpadc;
+
+ gpadc = ab8500_gpadc_get("ab8500-gpadc.0");
+ usb_id_raw = ab8500_gpadc_read_raw(gpadc, USB_ID,
+ avg_sample, trig_edge, trig_timer, conv_type);
+ usb_id_convert = ab8500_gpadc_ad_to_voltage(gpadc, USB_ID,
+ usb_id_raw);
+
+ return seq_printf(s, "%d,0x%X\n",
+ usb_id_convert, usb_id_raw);
+}
+
+static int ab8500_gpadc_usb_id_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, ab8500_gpadc_usb_id_print, inode->i_private);
+}
+
+static const struct file_operations ab8500_gpadc_usb_id_fops = {
+ .open = ab8500_gpadc_usb_id_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+ .owner = THIS_MODULE,
+};
+
+static int ab8540_gpadc_xtal_temp_print(struct seq_file *s, void *p)
+{
+ int xtal_temp_raw;
+ int xtal_temp_convert;
+ struct ab8500_gpadc *gpadc;
+
+ gpadc = ab8500_gpadc_get("ab8500-gpadc.0");
+ xtal_temp_raw = ab8500_gpadc_read_raw(gpadc, XTAL_TEMP,
+ avg_sample, trig_edge, trig_timer, conv_type);
+ xtal_temp_convert = ab8500_gpadc_ad_to_voltage(gpadc, XTAL_TEMP,
+ xtal_temp_raw);
+
+ return seq_printf(s, "%d,0x%X\n",
+ xtal_temp_convert, xtal_temp_raw);
+}
+
+static int ab8540_gpadc_xtal_temp_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, ab8540_gpadc_xtal_temp_print,
+ inode->i_private);
+}
+
+static const struct file_operations ab8540_gpadc_xtal_temp_fops = {
+ .open = ab8540_gpadc_xtal_temp_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+ .owner = THIS_MODULE,
+};
+
+static int ab8540_gpadc_vbat_true_meas_print(struct seq_file *s, void *p)
+{
+ int vbat_true_meas_raw;
+ int vbat_true_meas_convert;
+ struct ab8500_gpadc *gpadc;
+
+ gpadc = ab8500_gpadc_get("ab8500-gpadc.0");
+ vbat_true_meas_raw = ab8500_gpadc_read_raw(gpadc, VBAT_TRUE_MEAS,
+ avg_sample, trig_edge, trig_timer, conv_type);
+ vbat_true_meas_convert = ab8500_gpadc_ad_to_voltage(gpadc, VBAT_TRUE_MEAS,
+ vbat_true_meas_raw);
+
+ return seq_printf(s, "%d,0x%X\n",
+ vbat_true_meas_convert, vbat_true_meas_raw);
+}
+
+static int ab8540_gpadc_vbat_true_meas_open(struct inode *inode,
+ struct file *file)
+{
+ return single_open(file, ab8540_gpadc_vbat_true_meas_print,
+ inode->i_private);
+}
+
+static const struct file_operations ab8540_gpadc_vbat_true_meas_fops = {
+ .open = ab8540_gpadc_vbat_true_meas_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+ .owner = THIS_MODULE,
+};
+
+static int ab8540_gpadc_bat_ctrl_and_ibat_print(struct seq_file *s, void *p)
+{
+ int bat_ctrl_raw;
+ int bat_ctrl_convert;
+ int ibat_raw;
+ int ibat_convert;
+ struct ab8500_gpadc *gpadc;
+
+ gpadc = ab8500_gpadc_get("ab8500-gpadc.0");
+ bat_ctrl_raw = ab8500_gpadc_double_read_raw(gpadc, BAT_CTRL_AND_IBAT,
+ avg_sample, trig_edge, trig_timer, conv_type, &ibat_raw);
+
+ bat_ctrl_convert = ab8500_gpadc_ad_to_voltage(gpadc, BAT_CTRL,
+ bat_ctrl_raw);
+ ibat_convert = ab8500_gpadc_ad_to_voltage(gpadc, IBAT_VIRTUAL_CHANNEL,
+ ibat_raw);
+
+ return seq_printf(s, "%d,0x%X\n" "%d,0x%X\n",
+ bat_ctrl_convert, bat_ctrl_raw,
+ ibat_convert, ibat_raw);
+}
+
+static int ab8540_gpadc_bat_ctrl_and_ibat_open(struct inode *inode,
+ struct file *file)
+{
+ return single_open(file, ab8540_gpadc_bat_ctrl_and_ibat_print,
+ inode->i_private);
+}
+
+static const struct file_operations ab8540_gpadc_bat_ctrl_and_ibat_fops = {
+ .open = ab8540_gpadc_bat_ctrl_and_ibat_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+ .owner = THIS_MODULE,
+};
+
+static int ab8540_gpadc_vbat_meas_and_ibat_print(struct seq_file *s, void *p)
+{
+ int vbat_meas_raw;
+ int vbat_meas_convert;
+ int ibat_raw;
+ int ibat_convert;
+ struct ab8500_gpadc *gpadc;
+
+ gpadc = ab8500_gpadc_get("ab8500-gpadc.0");
+ vbat_meas_raw = ab8500_gpadc_double_read_raw(gpadc, VBAT_MEAS_AND_IBAT,
+ avg_sample, trig_edge, trig_timer, conv_type, &ibat_raw);
+ vbat_meas_convert = ab8500_gpadc_ad_to_voltage(gpadc, MAIN_BAT_V,
+ vbat_meas_raw);
+ ibat_convert = ab8500_gpadc_ad_to_voltage(gpadc, IBAT_VIRTUAL_CHANNEL,
+ ibat_raw);
+
+ return seq_printf(s, "%d,0x%X\n" "%d,0x%X\n",
+ vbat_meas_convert, vbat_meas_raw,
+ ibat_convert, ibat_raw);
+}
+
+static int ab8540_gpadc_vbat_meas_and_ibat_open(struct inode *inode,
+ struct file *file)
+{
+ return single_open(file, ab8540_gpadc_vbat_meas_and_ibat_print,
+ inode->i_private);
+}
+
+static const struct file_operations ab8540_gpadc_vbat_meas_and_ibat_fops = {
+ .open = ab8540_gpadc_vbat_meas_and_ibat_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+ .owner = THIS_MODULE,
+};
+
+static int ab8540_gpadc_vbat_true_meas_and_ibat_print(struct seq_file *s, void *p)
+{
+ int vbat_true_meas_raw;
+ int vbat_true_meas_convert;
+ int ibat_raw;
+ int ibat_convert;
+ struct ab8500_gpadc *gpadc;
+
+ gpadc = ab8500_gpadc_get("ab8500-gpadc.0");
+ vbat_true_meas_raw = ab8500_gpadc_double_read_raw(gpadc,
+ VBAT_TRUE_MEAS_AND_IBAT, avg_sample, trig_edge,
+ trig_timer, conv_type, &ibat_raw);
+ vbat_true_meas_convert = ab8500_gpadc_ad_to_voltage(gpadc,
+ VBAT_TRUE_MEAS, vbat_true_meas_raw);
+ ibat_convert = ab8500_gpadc_ad_to_voltage(gpadc, IBAT_VIRTUAL_CHANNEL,
+ ibat_raw);
+
+ return seq_printf(s, "%d,0x%X\n" "%d,0x%X\n",
+ vbat_true_meas_convert, vbat_true_meas_raw,
+ ibat_convert, ibat_raw);
+}
+
+static int ab8540_gpadc_vbat_true_meas_and_ibat_open(struct inode *inode,
+ struct file *file)
+{
+ return single_open(file, ab8540_gpadc_vbat_true_meas_and_ibat_print,
+ inode->i_private);
+}
+
+static const struct file_operations ab8540_gpadc_vbat_true_meas_and_ibat_fops = {
+ .open = ab8540_gpadc_vbat_true_meas_and_ibat_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+ .owner = THIS_MODULE,
+};
+
+static int ab8540_gpadc_bat_temp_and_ibat_print(struct seq_file *s, void *p)
+{
+ int bat_temp_raw;
+ int bat_temp_convert;
+ int ibat_raw;
+ int ibat_convert;
+ struct ab8500_gpadc *gpadc;
+
+ gpadc = ab8500_gpadc_get("ab8500-gpadc.0");
+ bat_temp_raw = ab8500_gpadc_double_read_raw(gpadc, BAT_TEMP_AND_IBAT,
+ avg_sample, trig_edge, trig_timer, conv_type, &ibat_raw);
+ bat_temp_convert = ab8500_gpadc_ad_to_voltage(gpadc, BTEMP_BALL,
+ bat_temp_raw);
+ ibat_convert = ab8500_gpadc_ad_to_voltage(gpadc, IBAT_VIRTUAL_CHANNEL,
+ ibat_raw);
+
+ return seq_printf(s, "%d,0x%X\n" "%d,0x%X\n",
+ bat_temp_convert, bat_temp_raw,
+ ibat_convert, ibat_raw);
+}
+
+static int ab8540_gpadc_bat_temp_and_ibat_open(struct inode *inode,
+ struct file *file)
+{
+ return single_open(file, ab8540_gpadc_bat_temp_and_ibat_print,
+ inode->i_private);
+}
+
+static const struct file_operations ab8540_gpadc_bat_temp_and_ibat_fops = {
+ .open = ab8540_gpadc_bat_temp_and_ibat_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+ .owner = THIS_MODULE,
+};
+
+static int ab8540_gpadc_otp_cal_print(struct seq_file *s, void *p)
+{
+ struct ab8500_gpadc *gpadc;
+ u16 vmain_l, vmain_h, btemp_l, btemp_h;
+ u16 vbat_l, vbat_h, ibat_l, ibat_h;
+
+ gpadc = ab8500_gpadc_get("ab8500-gpadc.0");
+ ab8540_gpadc_get_otp(gpadc, &vmain_l, &vmain_h, &btemp_l, &btemp_h,
+ &vbat_l, &vbat_h, &ibat_l, &ibat_h);
+ return seq_printf(s, "VMAIN_L:0x%X\n"
+ "VMAIN_H:0x%X\n"
+ "BTEMP_L:0x%X\n"
+ "BTEMP_H:0x%X\n"
+ "VBAT_L:0x%X\n"
+ "VBAT_H:0x%X\n"
+ "IBAT_L:0x%X\n"
+ "IBAT_H:0x%X\n",
+ vmain_l, vmain_h, btemp_l, btemp_h, vbat_l, vbat_h, ibat_l, ibat_h);
+}
+
+static int ab8540_gpadc_otp_cal_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, ab8540_gpadc_otp_cal_print, inode->i_private);
+}
+
+static const struct file_operations ab8540_gpadc_otp_calib_fops = {
+ .open = ab8540_gpadc_otp_cal_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+ .owner = THIS_MODULE,
+};
+
+static int ab8500_gpadc_avg_sample_print(struct seq_file *s, void *p)
+{
+ return seq_printf(s, "%d\n", avg_sample);
+}
+
+static int ab8500_gpadc_avg_sample_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, ab8500_gpadc_avg_sample_print,
+ inode->i_private);
+}
+
+static ssize_t ab8500_gpadc_avg_sample_write(struct file *file,
+ const char __user *user_buf,
+ size_t count, loff_t *ppos)
+{
+ struct device *dev = ((struct seq_file *)(file->private_data))->private;
+ unsigned long user_avg_sample;
+ int err;
+
+ err = kstrtoul_from_user(user_buf, count, 0, &user_avg_sample);
+ if (err)
+ return err;
+
+ if ((user_avg_sample == SAMPLE_1) || (user_avg_sample == SAMPLE_4)
+ || (user_avg_sample == SAMPLE_8)
+ || (user_avg_sample == SAMPLE_16)) {
+ avg_sample = (u8) user_avg_sample;
+ } else {
+ dev_err(dev, "debugfs error input: "
+ "should be egal to 1, 4, 8 or 16\n");
+ return -EINVAL;
+ }
+
+ return count;
+}
+
+static const struct file_operations ab8500_gpadc_avg_sample_fops = {
+ .open = ab8500_gpadc_avg_sample_open,
+ .read = seq_read,
+ .write = ab8500_gpadc_avg_sample_write,
+ .llseek = seq_lseek,
+ .release = single_release,
+ .owner = THIS_MODULE,
+};
+
+static int ab8500_gpadc_trig_edge_print(struct seq_file *s, void *p)
+{
+ return seq_printf(s, "%d\n", trig_edge);
+}
+
+static int ab8500_gpadc_trig_edge_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, ab8500_gpadc_trig_edge_print,
+ inode->i_private);
+}
+
+static ssize_t ab8500_gpadc_trig_edge_write(struct file *file,
+ const char __user *user_buf,
+ size_t count, loff_t *ppos)
+{
+ struct device *dev = ((struct seq_file *)(file->private_data))->private;
+ unsigned long user_trig_edge;
+ int err;
+
+ err = kstrtoul_from_user(user_buf, count, 0, &user_trig_edge);
+ if (err)
+ return err;
+
+ if ((user_trig_edge == RISING_EDGE)
+ || (user_trig_edge == FALLING_EDGE)) {
+ trig_edge = (u8) user_trig_edge;
+ } else {
+ dev_err(dev, "Wrong input:\n"
+ "Enter 0. Rising edge\n"
+ "Enter 1. Falling edge\n");
+ return -EINVAL;
+ }
+
+ return count;
+}
+
+static const struct file_operations ab8500_gpadc_trig_edge_fops = {
+ .open = ab8500_gpadc_trig_edge_open,
+ .read = seq_read,
+ .write = ab8500_gpadc_trig_edge_write,
+ .llseek = seq_lseek,
+ .release = single_release,
+ .owner = THIS_MODULE,
+};
+
+static int ab8500_gpadc_trig_timer_print(struct seq_file *s, void *p)
+{
+ return seq_printf(s, "%d\n", trig_timer);
+}
+
+static int ab8500_gpadc_trig_timer_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, ab8500_gpadc_trig_timer_print,
+ inode->i_private);
+}
+
+static ssize_t ab8500_gpadc_trig_timer_write(struct file *file,
+ const char __user *user_buf,
+ size_t count, loff_t *ppos)
+{
+ struct device *dev = ((struct seq_file *)(file->private_data))->private;
+ unsigned long user_trig_timer;
+ int err;
+
+ err = kstrtoul_from_user(user_buf, count, 0, &user_trig_timer);
+ if (err)
+ return err;
+
+ if ((user_trig_timer >= 0) && (user_trig_timer <= 255)) {
+ trig_timer = (u8) user_trig_timer;
+ } else {
+ dev_err(dev, "debugfs error input: "
+ "should be beetween 0 to 255\n");
+ return -EINVAL;
+ }
+
+ return count;
+}
+
+static const struct file_operations ab8500_gpadc_trig_timer_fops = {
+ .open = ab8500_gpadc_trig_timer_open,
+ .read = seq_read,
+ .write = ab8500_gpadc_trig_timer_write,
+ .llseek = seq_lseek,
+ .release = single_release,
+ .owner = THIS_MODULE,
+};
+
+static int ab8500_gpadc_conv_type_print(struct seq_file *s, void *p)
+{
+ return seq_printf(s, "%d\n", conv_type);
+}
+
+static int ab8500_gpadc_conv_type_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, ab8500_gpadc_conv_type_print,
+ inode->i_private);
+}
+
+static ssize_t ab8500_gpadc_conv_type_write(struct file *file,
+ const char __user *user_buf,
+ size_t count, loff_t *ppos)
+{
+ struct device *dev = ((struct seq_file *)(file->private_data))->private;
+ unsigned long user_conv_type;
+ int err;
+
+ err = kstrtoul_from_user(user_buf, count, 0, &user_conv_type);
+ if (err)
+ return err;
+
+ if ((user_conv_type == ADC_SW)
+ || (user_conv_type == ADC_HW)) {
+ conv_type = (u8) user_conv_type;
+ } else {
+ dev_err(dev, "Wrong input:\n"
+ "Enter 0. ADC SW conversion\n"
+ "Enter 1. ADC HW conversion\n");
+ return -EINVAL;
+ }
+
+ return count;
+}
+
+static const struct file_operations ab8500_gpadc_conv_type_fops = {
+ .open = ab8500_gpadc_conv_type_open,
+ .read = seq_read,
+ .write = ab8500_gpadc_conv_type_write,
+ .llseek = seq_lseek,
+ .release = single_release,
+ .owner = THIS_MODULE,
+};
+
/*
* return length of an ASCII numerical value, 0 is string is not a
* numerical value.
@@ -1352,7 +2745,7 @@ static int ab8500_subscribe_unsubscribe_open(struct inode *inode,
struct file *file)
{
return single_open(file, ab8500_subscribe_unsubscribe_print,
- inode->i_private);
+ inode->i_private);
}
/*
@@ -1382,21 +2775,14 @@ static ssize_t ab8500_subscribe_write(struct file *file,
size_t count, loff_t *ppos)
{
struct device *dev = ((struct seq_file *)(file->private_data))->private;
- char buf[32];
- int buf_size;
unsigned long user_val;
int err;
unsigned int irq_index;
- /* Get userspace string and assure termination */
- buf_size = min(count, (sizeof(buf)-1));
- if (copy_from_user(buf, user_buf, buf_size))
- return -EFAULT;
- buf[buf_size] = 0;
-
- err = strict_strtoul(buf, 0, &user_val);
+ err = kstrtoul_from_user(user_buf, count, 0, &user_val);
if (err)
- return -EINVAL;
+ return err;
+
if (user_val < irq_first) {
dev_err(dev, "debugfs error input < %d\n", irq_first);
return -EINVAL;
@@ -1416,7 +2802,7 @@ static ssize_t ab8500_subscribe_write(struct file *file,
*/
dev_attr[irq_index] = kmalloc(sizeof(struct device_attribute),
GFP_KERNEL);
- event_name[irq_index] = kmalloc(buf_size, GFP_KERNEL);
+ event_name[irq_index] = kmalloc(count, GFP_KERNEL);
sprintf(event_name[irq_index], "%lu", user_val);
dev_attr[irq_index]->show = show_irq;
dev_attr[irq_index]->store = NULL;
@@ -1438,7 +2824,7 @@ static ssize_t ab8500_subscribe_write(struct file *file,
return err;
}
- return buf_size;
+ return count;
}
static ssize_t ab8500_unsubscribe_write(struct file *file,
@@ -1446,21 +2832,14 @@ static ssize_t ab8500_unsubscribe_write(struct file *file,
size_t count, loff_t *ppos)
{
struct device *dev = ((struct seq_file *)(file->private_data))->private;
- char buf[32];
- int buf_size;
unsigned long user_val;
int err;
unsigned int irq_index;
- /* Get userspace string and assure termination */
- buf_size = min(count, (sizeof(buf)-1));
- if (copy_from_user(buf, user_buf, buf_size))
- return -EFAULT;
- buf[buf_size] = 0;
-
- err = strict_strtoul(buf, 0, &user_val);
+ err = kstrtoul_from_user(user_buf, count, 0, &user_val);
if (err)
- return -EINVAL;
+ return err;
+
if (user_val < irq_first) {
dev_err(dev, "debugfs error input < %d\n", irq_first);
return -EINVAL;
@@ -1485,7 +2864,7 @@ static ssize_t ab8500_unsubscribe_write(struct file *file,
kfree(event_name[irq_index]);
kfree(dev_attr[irq_index]);
- return buf_size;
+ return count;
}
/*
@@ -1583,7 +2962,7 @@ static int ab8500_debug_probe(struct platform_device *plf)
irq_first = platform_get_irq_byname(plf, "IRQ_FIRST");
if (irq_first < 0) {
dev_err(&plf->dev, "First irq not found, err %d\n",
- irq_first);
+ irq_first);
ret = irq_first;
goto out_freeevent_name;
}
@@ -1591,9 +2970,9 @@ static int ab8500_debug_probe(struct platform_device *plf)
irq_last = platform_get_irq_byname(plf, "IRQ_LAST");
if (irq_last < 0) {
dev_err(&plf->dev, "Last irq not found, err %d\n",
- irq_last);
+ irq_last);
ret = irq_last;
- goto out_freeevent_name;
+ goto out_freeevent_name;
}
ab8500_dir = debugfs_create_dir(AB8500_NAME_STRING, NULL);
@@ -1601,124 +2980,198 @@ static int ab8500_debug_probe(struct platform_device *plf)
goto err;
ab8500_gpadc_dir = debugfs_create_dir(AB8500_ADC_NAME_STRING,
- ab8500_dir);
+ ab8500_dir);
if (!ab8500_gpadc_dir)
goto err;
file = debugfs_create_file("all-bank-registers", S_IRUGO,
- ab8500_dir, &plf->dev, &ab8500_registers_fops);
+ ab8500_dir, &plf->dev, &ab8500_registers_fops);
if (!file)
goto err;
file = debugfs_create_file("all-banks", S_IRUGO,
- ab8500_dir, &plf->dev, &ab8500_all_banks_fops);
+ ab8500_dir, &plf->dev, &ab8500_all_banks_fops);
if (!file)
goto err;
- file = debugfs_create_file("register-bank", (S_IRUGO | S_IWUSR),
- ab8500_dir, &plf->dev, &ab8500_bank_fops);
+ file = debugfs_create_file("register-bank", (S_IRUGO | S_IWUSR | S_IWGRP),
+ ab8500_dir, &plf->dev, &ab8500_bank_fops);
if (!file)
goto err;
- file = debugfs_create_file("register-address", (S_IRUGO | S_IWUSR),
- ab8500_dir, &plf->dev, &ab8500_address_fops);
+ file = debugfs_create_file("register-address", (S_IRUGO | S_IWUSR | S_IWGRP),
+ ab8500_dir, &plf->dev, &ab8500_address_fops);
if (!file)
goto err;
- file = debugfs_create_file("register-value", (S_IRUGO | S_IWUSR),
- ab8500_dir, &plf->dev, &ab8500_val_fops);
+ file = debugfs_create_file("register-value", (S_IRUGO | S_IWUSR | S_IWGRP),
+ ab8500_dir, &plf->dev, &ab8500_val_fops);
if (!file)
goto err;
- file = debugfs_create_file("irq-subscribe", (S_IRUGO | S_IWUSR),
- ab8500_dir, &plf->dev, &ab8500_subscribe_fops);
+ file = debugfs_create_file("irq-subscribe", (S_IRUGO | S_IWUSR | S_IWGRP),
+ ab8500_dir, &plf->dev, &ab8500_subscribe_fops);
if (!file)
goto err;
- if (is_ab8500(ab8500))
+ if (is_ab8500(ab8500)) {
+ debug_ranges = ab8500_debug_ranges;
num_interrupt_lines = AB8500_NR_IRQS;
- else if (is_ab8505(ab8500))
+ } else if (is_ab8505(ab8500)) {
+ debug_ranges = ab8505_debug_ranges;
num_interrupt_lines = AB8505_NR_IRQS;
- else if (is_ab9540(ab8500))
+ } else if (is_ab9540(ab8500)) {
+ debug_ranges = ab8505_debug_ranges;
num_interrupt_lines = AB9540_NR_IRQS;
+ } else if (is_ab8540(ab8500)) {
+ debug_ranges = ab8540_debug_ranges;
+ num_interrupt_lines = AB8540_NR_IRQS;
+ }
file = debugfs_create_file("interrupts", (S_IRUGO),
- ab8500_dir, &plf->dev, &ab8500_interrupts_fops);
+ ab8500_dir, &plf->dev, &ab8500_interrupts_fops);
if (!file)
goto err;
- file = debugfs_create_file("irq-unsubscribe", (S_IRUGO | S_IWUSR),
- ab8500_dir, &plf->dev, &ab8500_unsubscribe_fops);
+ file = debugfs_create_file("irq-unsubscribe", (S_IRUGO | S_IWUSR | S_IWGRP),
+ ab8500_dir, &plf->dev, &ab8500_unsubscribe_fops);
if (!file)
goto err;
- file = debugfs_create_file("hwreg", (S_IRUGO | S_IWUSR),
- ab8500_dir, &plf->dev, &ab8500_hwreg_fops);
+ file = debugfs_create_file("hwreg", (S_IRUGO | S_IWUSR | S_IWGRP),
+ ab8500_dir, &plf->dev, &ab8500_hwreg_fops);
if (!file)
goto err;
- file = debugfs_create_file("bat_ctrl", (S_IRUGO | S_IWUSR),
- ab8500_gpadc_dir, &plf->dev, &ab8500_gpadc_bat_ctrl_fops);
+ file = debugfs_create_file("all-modem-registers", (S_IRUGO | S_IWUSR | S_IWGRP),
+ ab8500_dir, &plf->dev, &ab8500_modem_fops);
if (!file)
goto err;
- file = debugfs_create_file("btemp_ball", (S_IRUGO | S_IWUSR),
- ab8500_gpadc_dir, &plf->dev, &ab8500_gpadc_btemp_ball_fops);
+ file = debugfs_create_file("bat_ctrl", (S_IRUGO | S_IWUSR | S_IWGRP),
+ ab8500_gpadc_dir, &plf->dev, &ab8500_gpadc_bat_ctrl_fops);
if (!file)
goto err;
- file = debugfs_create_file("main_charger_v", (S_IRUGO | S_IWUSR),
- ab8500_gpadc_dir, &plf->dev, &ab8500_gpadc_main_charger_v_fops);
+ file = debugfs_create_file("btemp_ball", (S_IRUGO | S_IWUSR | S_IWGRP),
+ ab8500_gpadc_dir, &plf->dev, &ab8500_gpadc_btemp_ball_fops);
if (!file)
goto err;
- file = debugfs_create_file("acc_detect1", (S_IRUGO | S_IWUSR),
- ab8500_gpadc_dir, &plf->dev, &ab8500_gpadc_acc_detect1_fops);
+ file = debugfs_create_file("main_charger_v", (S_IRUGO | S_IWUSR | S_IWGRP),
+ ab8500_gpadc_dir, &plf->dev, &ab8500_gpadc_main_charger_v_fops);
if (!file)
goto err;
- file = debugfs_create_file("acc_detect2", (S_IRUGO | S_IWUSR),
- ab8500_gpadc_dir, &plf->dev, &ab8500_gpadc_acc_detect2_fops);
+ file = debugfs_create_file("acc_detect1", (S_IRUGO | S_IWUSR | S_IWGRP),
+ ab8500_gpadc_dir, &plf->dev, &ab8500_gpadc_acc_detect1_fops);
if (!file)
goto err;
- file = debugfs_create_file("adc_aux1", (S_IRUGO | S_IWUSR),
- ab8500_gpadc_dir, &plf->dev, &ab8500_gpadc_aux1_fops);
+ file = debugfs_create_file("acc_detect2", (S_IRUGO | S_IWUSR | S_IWGRP),
+ ab8500_gpadc_dir, &plf->dev, &ab8500_gpadc_acc_detect2_fops);
if (!file)
goto err;
- file = debugfs_create_file("adc_aux2", (S_IRUGO | S_IWUSR),
- ab8500_gpadc_dir, &plf->dev, &ab8500_gpadc_aux2_fops);
+ file = debugfs_create_file("adc_aux1", (S_IRUGO | S_IWUSR | S_IWGRP),
+ ab8500_gpadc_dir, &plf->dev, &ab8500_gpadc_aux1_fops);
if (!file)
goto err;
- file = debugfs_create_file("main_bat_v", (S_IRUGO | S_IWUSR),
- ab8500_gpadc_dir, &plf->dev, &ab8500_gpadc_main_bat_v_fops);
+ file = debugfs_create_file("adc_aux2", (S_IRUGO | S_IWUSR | S_IWGRP),
+ ab8500_gpadc_dir, &plf->dev, &ab8500_gpadc_aux2_fops);
if (!file)
goto err;
- file = debugfs_create_file("vbus_v", (S_IRUGO | S_IWUSR),
- ab8500_gpadc_dir, &plf->dev, &ab8500_gpadc_vbus_v_fops);
+ file = debugfs_create_file("main_bat_v", (S_IRUGO | S_IWUSR | S_IWGRP),
+ ab8500_gpadc_dir, &plf->dev, &ab8500_gpadc_main_bat_v_fops);
if (!file)
goto err;
- file = debugfs_create_file("main_charger_c", (S_IRUGO | S_IWUSR),
- ab8500_gpadc_dir, &plf->dev, &ab8500_gpadc_main_charger_c_fops);
+ file = debugfs_create_file("vbus_v", (S_IRUGO | S_IWUSR | S_IWGRP),
+ ab8500_gpadc_dir, &plf->dev, &ab8500_gpadc_vbus_v_fops);
+ if (!file)
+ goto err;
+
+ file = debugfs_create_file("main_charger_c", (S_IRUGO | S_IWUSR | S_IWGRP),
+ ab8500_gpadc_dir, &plf->dev, &ab8500_gpadc_main_charger_c_fops);
+ if (!file)
+ goto err;
+
+ file = debugfs_create_file("usb_charger_c", (S_IRUGO | S_IWUSR | S_IWGRP),
+ ab8500_gpadc_dir, &plf->dev, &ab8500_gpadc_usb_charger_c_fops);
+ if (!file)
+ goto err;
+
+ file = debugfs_create_file("bk_bat_v", (S_IRUGO | S_IWUSR | S_IWGRP),
+ ab8500_gpadc_dir, &plf->dev, &ab8500_gpadc_bk_bat_v_fops);
+ if (!file)
+ goto err;
+
+ file = debugfs_create_file("die_temp", (S_IRUGO | S_IWUSR | S_IWGRP),
+ ab8500_gpadc_dir, &plf->dev, &ab8500_gpadc_die_temp_fops);
+ if (!file)
+ goto err;
+
+ file = debugfs_create_file("usb_id", (S_IRUGO | S_IWUSR | S_IWGRP),
+ ab8500_gpadc_dir, &plf->dev, &ab8500_gpadc_usb_id_fops);
+ if (!file)
+ goto err;
+
+ if (is_ab8540(ab8500)) {
+ file = debugfs_create_file("xtal_temp", (S_IRUGO | S_IWUSR | S_IWGRP),
+ ab8500_gpadc_dir, &plf->dev, &ab8540_gpadc_xtal_temp_fops);
+ if (!file)
+ goto err;
+ file = debugfs_create_file("vbattruemeas", (S_IRUGO | S_IWUSR | S_IWGRP),
+ ab8500_gpadc_dir, &plf->dev,
+ &ab8540_gpadc_vbat_true_meas_fops);
+ if (!file)
+ goto err;
+ file = debugfs_create_file("batctrl_and_ibat",
+ (S_IRUGO | S_IWUGO), ab8500_gpadc_dir,
+ &plf->dev, &ab8540_gpadc_bat_ctrl_and_ibat_fops);
+ if (!file)
+ goto err;
+ file = debugfs_create_file("vbatmeas_and_ibat",
+ (S_IRUGO | S_IWUGO), ab8500_gpadc_dir,
+ &plf->dev,
+ &ab8540_gpadc_vbat_meas_and_ibat_fops);
+ if (!file)
+ goto err;
+ file = debugfs_create_file("vbattruemeas_and_ibat",
+ (S_IRUGO | S_IWUGO), ab8500_gpadc_dir,
+ &plf->dev,
+ &ab8540_gpadc_vbat_true_meas_and_ibat_fops);
+ if (!file)
+ goto err;
+ file = debugfs_create_file("battemp_and_ibat",
+ (S_IRUGO | S_IWUGO), ab8500_gpadc_dir,
+ &plf->dev, &ab8540_gpadc_bat_temp_and_ibat_fops);
+ if (!file)
+ goto err;
+ file = debugfs_create_file("otp_calib", (S_IRUGO | S_IWUSR | S_IWGRP),
+ ab8500_gpadc_dir, &plf->dev, &ab8540_gpadc_otp_calib_fops);
+ if (!file)
+ goto err;
+ }
+ file = debugfs_create_file("avg_sample", (S_IRUGO | S_IWUSR | S_IWGRP),
+ ab8500_gpadc_dir, &plf->dev, &ab8500_gpadc_avg_sample_fops);
if (!file)
goto err;
- file = debugfs_create_file("usb_charger_c", (S_IRUGO | S_IWUSR),
- ab8500_gpadc_dir, &plf->dev, &ab8500_gpadc_usb_charger_c_fops);
+ file = debugfs_create_file("trig_edge", (S_IRUGO | S_IWUSR | S_IWGRP),
+ ab8500_gpadc_dir, &plf->dev, &ab8500_gpadc_trig_edge_fops);
if (!file)
goto err;
- file = debugfs_create_file("bk_bat_v", (S_IRUGO | S_IWUSR),
- ab8500_gpadc_dir, &plf->dev, &ab8500_gpadc_bk_bat_v_fops);
+ file = debugfs_create_file("trig_timer", (S_IRUGO | S_IWUSR | S_IWGRP),
+ ab8500_gpadc_dir, &plf->dev, &ab8500_gpadc_trig_timer_fops);
if (!file)
goto err;
- file = debugfs_create_file("die_temp", (S_IRUGO | S_IWUSR),
- ab8500_gpadc_dir, &plf->dev, &ab8500_gpadc_die_temp_fops);
+ file = debugfs_create_file("conv_type", (S_IRUGO | S_IWUSR | S_IWGRP),
+ ab8500_gpadc_dir, &plf->dev, &ab8500_gpadc_conv_type_fops);
if (!file)
goto err;
diff --git a/drivers/mfd/ab8500-gpadc.c b/drivers/mfd/ab8500-gpadc.c
index 5f341a50ee5a..65f72284185d 100644
--- a/drivers/mfd/ab8500-gpadc.c
+++ b/drivers/mfd/ab8500-gpadc.c
@@ -37,6 +37,13 @@
#define AB8500_GPADC_AUTODATAL_REG 0x07
#define AB8500_GPADC_AUTODATAH_REG 0x08
#define AB8500_GPADC_MUX_CTRL_REG 0x09
+#define AB8540_GPADC_MANDATA2L_REG 0x09
+#define AB8540_GPADC_MANDATA2H_REG 0x0A
+#define AB8540_GPADC_APEAAX_REG 0x10
+#define AB8540_GPADC_APEAAT_REG 0x11
+#define AB8540_GPADC_APEAAM_REG 0x12
+#define AB8540_GPADC_APEAAH_REG 0x13
+#define AB8540_GPADC_APEAAL_REG 0x14
/*
* OTP register offsets
@@ -49,19 +56,29 @@
#define AB8500_GPADC_CAL_5 0x13
#define AB8500_GPADC_CAL_6 0x14
#define AB8500_GPADC_CAL_7 0x15
+/* New calibration for 8540 */
+#define AB8540_GPADC_OTP4_REG_7 0x38
+#define AB8540_GPADC_OTP4_REG_6 0x39
+#define AB8540_GPADC_OTP4_REG_5 0x3A
/* gpadc constants */
#define EN_VINTCORE12 0x04
#define EN_VTVOUT 0x02
#define EN_GPADC 0x01
#define DIS_GPADC 0x00
-#define SW_AVG_16 0x60
+#define AVG_1 0x00
+#define AVG_4 0x20
+#define AVG_8 0x40
+#define AVG_16 0x60
#define ADC_SW_CONV 0x04
#define EN_ICHAR 0x80
#define BTEMP_PULL_UP 0x08
#define EN_BUF 0x40
#define DIS_ZERO 0x00
#define GPADC_BUSY 0x01
+#define EN_FALLING 0x10
+#define EN_TRIG_EDGE 0x02
+#define EN_VBIAS_XTAL_TEMP 0x02
/* GPADC constants from AB8500 spec, UM0836 */
#define ADC_RESOLUTION 1024
@@ -80,8 +97,21 @@
#define ADC_CH_BKBAT_MIN 0
#define ADC_CH_BKBAT_MAX 3200
+/* GPADC constants from AB8540 spec */
+#define ADC_CH_IBAT_MIN (-6000) /* mA range measured by ADC for ibat*/
+#define ADC_CH_IBAT_MAX 6000
+#define ADC_CH_IBAT_MIN_V (-60) /* mV range measured by ADC for ibat*/
+#define ADC_CH_IBAT_MAX_V 60
+#define IBAT_VDROP_L (-56) /* mV */
+#define IBAT_VDROP_H 56
+
/* This is used to not lose precision when dividing to get gain and offset */
-#define CALIB_SCALE 1000
+#define CALIB_SCALE 1000
+/*
+ * Number of bits shift used to not lose precision
+ * when dividing to get ibat gain.
+ */
+#define CALIB_SHIFT_IBAT 20
/* Time in ms before disabling regulator */
#define GPADC_AUDOSUSPEND_DELAY 1
@@ -92,6 +122,7 @@ enum cal_channels {
ADC_INPUT_VMAIN = 0,
ADC_INPUT_BTEMP,
ADC_INPUT_VBAT,
+ ADC_INPUT_IBAT,
NBR_CAL_INPUTS,
};
@@ -102,8 +133,10 @@ enum cal_channels {
* @offset: Offset of the ADC channel
*/
struct adc_cal_data {
- u64 gain;
- u64 offset;
+ s64 gain;
+ s64 offset;
+ u16 otp_calib_hi;
+ u16 otp_calib_lo;
};
/**
@@ -116,7 +149,10 @@ struct adc_cal_data {
* the completion of gpadc conversion
* @ab8500_gpadc_lock: structure of type mutex
* @regu: pointer to the struct regulator
- * @irq: interrupt number that is used by gpadc
+ * @irq_sw: interrupt number that is used by gpadc for Sw
+ * conversion
+ * @irq_hw: interrupt number that is used by gpadc for Hw
+ * conversion
* @cal_data array of ADC calibration data structs
*/
struct ab8500_gpadc {
@@ -126,7 +162,8 @@ struct ab8500_gpadc {
struct completion ab8500_gpadc_complete;
struct mutex ab8500_gpadc_lock;
struct regulator *regu;
- int irq;
+ int irq_sw;
+ int irq_hw;
struct adc_cal_data cal_data[NBR_CAL_INPUTS];
};
@@ -171,6 +208,7 @@ int ab8500_gpadc_ad_to_voltage(struct ab8500_gpadc *gpadc, u8 channel,
gpadc->cal_data[ADC_INPUT_VMAIN].offset) / CALIB_SCALE;
break;
+ case XTAL_TEMP:
case BAT_CTRL:
case BTEMP_BALL:
case ACC_DETECT1:
@@ -189,6 +227,7 @@ int ab8500_gpadc_ad_to_voltage(struct ab8500_gpadc *gpadc, u8 channel,
break;
case MAIN_BAT_V:
+ case VBAT_TRUE_MEAS:
/* For some reason we don't have calibrated data */
if (!gpadc->cal_data[ADC_INPUT_VBAT].gain) {
res = ADC_CH_VBAT_MIN + (ADC_CH_VBAT_MAX -
@@ -232,6 +271,20 @@ int ab8500_gpadc_ad_to_voltage(struct ab8500_gpadc *gpadc, u8 channel,
ADC_RESOLUTION;
break;
+ case IBAT_VIRTUAL_CHANNEL:
+ /* For some reason we don't have calibrated data */
+ if (!gpadc->cal_data[ADC_INPUT_IBAT].gain) {
+ res = ADC_CH_IBAT_MIN + (ADC_CH_IBAT_MAX -
+ ADC_CH_IBAT_MIN) * ad_value /
+ ADC_RESOLUTION;
+ break;
+ }
+ /* Here we can use the calibrated data */
+ res = (int) (ad_value * gpadc->cal_data[ADC_INPUT_IBAT].gain +
+ gpadc->cal_data[ADC_INPUT_IBAT].offset)
+ >> CALIB_SHIFT_IBAT;
+ break;
+
default:
dev_err(gpadc->dev,
"unknown channel, not possible to convert\n");
@@ -244,25 +297,35 @@ int ab8500_gpadc_ad_to_voltage(struct ab8500_gpadc *gpadc, u8 channel,
EXPORT_SYMBOL(ab8500_gpadc_ad_to_voltage);
/**
- * ab8500_gpadc_convert() - gpadc conversion
+ * ab8500_gpadc_sw_hw_convert() - gpadc conversion
* @channel: analog channel to be converted to digital data
+ * @avg_sample: number of ADC sample to average
+ * @trig_egde: selected ADC trig edge
+ * @trig_timer: selected ADC trigger delay timer
+ * @conv_type: selected conversion type (HW or SW conversion)
*
* This function converts the selected analog i/p to digital
* data.
*/
-int ab8500_gpadc_convert(struct ab8500_gpadc *gpadc, u8 channel)
+int ab8500_gpadc_sw_hw_convert(struct ab8500_gpadc *gpadc, u8 channel,
+ u8 avg_sample, u8 trig_edge, u8 trig_timer, u8 conv_type)
{
int ad_value;
int voltage;
- ad_value = ab8500_gpadc_read_raw(gpadc, channel);
- if (ad_value < 0) {
- dev_err(gpadc->dev, "GPADC raw value failed ch: %d\n", channel);
+ ad_value = ab8500_gpadc_read_raw(gpadc, channel, avg_sample,
+ trig_edge, trig_timer, conv_type);
+/* On failure retry a second time */
+ if (ad_value < 0)
+ ad_value = ab8500_gpadc_read_raw(gpadc, channel, avg_sample,
+ trig_edge, trig_timer, conv_type);
+if (ad_value < 0) {
+ dev_err(gpadc->dev, "GPADC raw value failed ch: %d\n",
+ channel);
return ad_value;
}
voltage = ab8500_gpadc_ad_to_voltage(gpadc, channel, ad_value);
-
if (voltage < 0)
dev_err(gpadc->dev, "GPADC to voltage conversion failed ch:"
" %d AD: 0x%x\n", channel, ad_value);
@@ -274,21 +337,46 @@ EXPORT_SYMBOL(ab8500_gpadc_convert);
/**
* ab8500_gpadc_read_raw() - gpadc read
* @channel: analog channel to be read
+ * @avg_sample: number of ADC sample to average
+ * @trig_edge: selected trig edge
+ * @trig_timer: selected ADC trigger delay timer
+ * @conv_type: selected conversion type (HW or SW conversion)
*
- * This function obtains the raw ADC value, this then needs
- * to be converted by calling ab8500_gpadc_ad_to_voltage()
+ * This function obtains the raw ADC value for an hardware conversion,
+ * this then needs to be converted by calling ab8500_gpadc_ad_to_voltage()
*/
-int ab8500_gpadc_read_raw(struct ab8500_gpadc *gpadc, u8 channel)
+int ab8500_gpadc_read_raw(struct ab8500_gpadc *gpadc, u8 channel,
+ u8 avg_sample, u8 trig_edge, u8 trig_timer, u8 conv_type)
+{
+ int raw_data;
+ raw_data = ab8500_gpadc_double_read_raw(gpadc, channel,
+ avg_sample, trig_edge, trig_timer, conv_type, NULL);
+ return raw_data;
+}
+
+int ab8500_gpadc_double_read_raw(struct ab8500_gpadc *gpadc, u8 channel,
+ u8 avg_sample, u8 trig_edge, u8 trig_timer, u8 conv_type,
+ int *ibat)
{
int ret;
int looplimit = 0;
- u8 val, low_data, high_data;
+ unsigned long completion_timeout;
+ u8 val, low_data, high_data, low_data2, high_data2;
+ u8 val_reg1 = 0;
+ unsigned int delay_min = 0;
+ unsigned int delay_max = 0;
+ u8 data_low_addr, data_high_addr;
if (!gpadc)
return -ENODEV;
- mutex_lock(&gpadc->ab8500_gpadc_lock);
+ /* check if convertion is supported */
+ if ((gpadc->irq_sw < 0) && (conv_type == ADC_SW))
+ return -ENOTSUPP;
+ if ((gpadc->irq_hw < 0) && (conv_type == ADC_HW))
+ return -ENOTSUPP;
+ mutex_lock(&gpadc->ab8500_gpadc_lock);
/* Enable VTVout LDO this is required for GPADC */
pm_runtime_get_sync(gpadc->dev);
@@ -309,16 +397,34 @@ int ab8500_gpadc_read_raw(struct ab8500_gpadc *gpadc, u8 channel)
}
/* Enable GPADC */
- ret = abx500_mask_and_set_register_interruptible(gpadc->dev,
- AB8500_GPADC, AB8500_GPADC_CTRL1_REG, EN_GPADC, EN_GPADC);
- if (ret < 0) {
- dev_err(gpadc->dev, "gpadc_conversion: enable gpadc failed\n");
- goto out;
+ val_reg1 |= EN_GPADC;
+
+ /* Select the channel source and set average samples */
+ switch (avg_sample) {
+ case SAMPLE_1:
+ val = channel | AVG_1;
+ break;
+ case SAMPLE_4:
+ val = channel | AVG_4;
+ break;
+ case SAMPLE_8:
+ val = channel | AVG_8;
+ break;
+ default:
+ val = channel | AVG_16;
+ break;
}
- /* Select the channel source and set average samples to 16 */
- ret = abx500_set_register_interruptible(gpadc->dev, AB8500_GPADC,
- AB8500_GPADC_CTRL2_REG, (channel | SW_AVG_16));
+ if (conv_type == ADC_HW) {
+ ret = abx500_set_register_interruptible(gpadc->dev,
+ AB8500_GPADC, AB8500_GPADC_CTRL3_REG, val);
+ val_reg1 |= EN_TRIG_EDGE;
+ if (trig_edge)
+ val_reg1 |= EN_FALLING;
+ }
+ else
+ ret = abx500_set_register_interruptible(gpadc->dev,
+ AB8500_GPADC, AB8500_GPADC_CTRL2_REG, val);
if (ret < 0) {
dev_err(gpadc->dev,
"gpadc_conversion: set avg samples failed\n");
@@ -333,71 +439,129 @@ int ab8500_gpadc_read_raw(struct ab8500_gpadc *gpadc, u8 channel)
switch (channel) {
case MAIN_CHARGER_C:
case USB_CHARGER_C:
- ret = abx500_mask_and_set_register_interruptible(gpadc->dev,
- AB8500_GPADC, AB8500_GPADC_CTRL1_REG,
- EN_BUF | EN_ICHAR,
- EN_BUF | EN_ICHAR);
+ val_reg1 |= EN_BUF | EN_ICHAR;
break;
case BTEMP_BALL:
if (!is_ab8500_2p0_or_earlier(gpadc->parent)) {
- /* Turn on btemp pull-up on ABB 3.0 */
- ret = abx500_mask_and_set_register_interruptible(
- gpadc->dev,
- AB8500_GPADC, AB8500_GPADC_CTRL1_REG,
- EN_BUF | BTEMP_PULL_UP,
- EN_BUF | BTEMP_PULL_UP);
-
- /*
- * Delay might be needed for ABB8500 cut 3.0, if not, remove
- * when hardware will be available
- */
- usleep_range(1000, 1000);
+ val_reg1 |= EN_BUF | BTEMP_PULL_UP;
+ /*
+ * Delay might be needed for ABB8500 cut 3.0, if not,
+ * remove when hardware will be availible
+ */
+ delay_min = 1000; /* Delay in micro seconds */
+ delay_max = 10000; /* large range to optimise sleep mode */
break;
}
/* Intentional fallthrough */
default:
- ret = abx500_mask_and_set_register_interruptible(gpadc->dev,
- AB8500_GPADC, AB8500_GPADC_CTRL1_REG, EN_BUF, EN_BUF);
+ val_reg1 |= EN_BUF;
break;
}
+
+ /* Write configuration to register */
+ ret = abx500_set_register_interruptible(gpadc->dev,
+ AB8500_GPADC, AB8500_GPADC_CTRL1_REG, val_reg1);
if (ret < 0) {
dev_err(gpadc->dev,
- "gpadc_conversion: select falling edge failed\n");
+ "gpadc_conversion: set Control register failed\n");
goto out;
}
- ret = abx500_mask_and_set_register_interruptible(gpadc->dev,
- AB8500_GPADC, AB8500_GPADC_CTRL1_REG, ADC_SW_CONV, ADC_SW_CONV);
- if (ret < 0) {
- dev_err(gpadc->dev,
- "gpadc_conversion: start s/w conversion failed\n");
- goto out;
+ if (delay_min != 0)
+ usleep_range(delay_min, delay_max);
+
+ if (conv_type == ADC_HW) {
+ /* Set trigger delay timer */
+ ret = abx500_set_register_interruptible(gpadc->dev,
+ AB8500_GPADC, AB8500_GPADC_AUTO_TIMER_REG, trig_timer);
+ if (ret < 0) {
+ dev_err(gpadc->dev,
+ "gpadc_conversion: trig timer failed\n");
+ goto out;
+ }
+ completion_timeout = 2 * HZ;
+ data_low_addr = AB8500_GPADC_AUTODATAL_REG;
+ data_high_addr = AB8500_GPADC_AUTODATAH_REG;
+ } else {
+ /* Start SW conversion */
+ ret = abx500_mask_and_set_register_interruptible(gpadc->dev,
+ AB8500_GPADC, AB8500_GPADC_CTRL1_REG,
+ ADC_SW_CONV, ADC_SW_CONV);
+ if (ret < 0) {
+ dev_err(gpadc->dev,
+ "gpadc_conversion: start s/w conv failed\n");
+ goto out;
+ }
+ completion_timeout = msecs_to_jiffies(CONVERSION_TIME);
+ data_low_addr = AB8500_GPADC_MANDATAL_REG;
+ data_high_addr = AB8500_GPADC_MANDATAH_REG;
}
+
/* wait for completion of conversion */
if (!wait_for_completion_timeout(&gpadc->ab8500_gpadc_complete,
- msecs_to_jiffies(CONVERSION_TIME))) {
+ completion_timeout)) {
dev_err(gpadc->dev,
- "timeout: didn't receive GPADC conversion interrupt\n");
+ "timeout didn't receive GPADC conv interrupt\n");
ret = -EINVAL;
goto out;
}
/* Read the converted RAW data */
- ret = abx500_get_register_interruptible(gpadc->dev, AB8500_GPADC,
- AB8500_GPADC_MANDATAL_REG, &low_data);
+ ret = abx500_get_register_interruptible(gpadc->dev,
+ AB8500_GPADC, data_low_addr, &low_data);
if (ret < 0) {
dev_err(gpadc->dev, "gpadc_conversion: read low data failed\n");
goto out;
}
- ret = abx500_get_register_interruptible(gpadc->dev, AB8500_GPADC,
- AB8500_GPADC_MANDATAH_REG, &high_data);
+ ret = abx500_get_register_interruptible(gpadc->dev,
+ AB8500_GPADC, data_high_addr, &high_data);
if (ret < 0) {
- dev_err(gpadc->dev,
- "gpadc_conversion: read high data failed\n");
+ dev_err(gpadc->dev, "gpadc_conversion: read high data failed\n");
goto out;
}
+ /* Check if double convertion is required */
+ if ((channel == BAT_CTRL_AND_IBAT) ||
+ (channel == VBAT_MEAS_AND_IBAT) ||
+ (channel == VBAT_TRUE_MEAS_AND_IBAT) ||
+ (channel == BAT_TEMP_AND_IBAT)) {
+
+ if (conv_type == ADC_HW) {
+ /* not supported */
+ ret = -ENOTSUPP;
+ dev_err(gpadc->dev,
+ "gpadc_conversion: only SW double conversion supported\n");
+ goto out;
+ } else {
+ /* Read the converted RAW data 2 */
+ ret = abx500_get_register_interruptible(gpadc->dev,
+ AB8500_GPADC, AB8540_GPADC_MANDATA2L_REG,
+ &low_data2);
+ if (ret < 0) {
+ dev_err(gpadc->dev,
+ "gpadc_conversion: read sw low data 2 failed\n");
+ goto out;
+ }
+
+ ret = abx500_get_register_interruptible(gpadc->dev,
+ AB8500_GPADC, AB8540_GPADC_MANDATA2H_REG,
+ &high_data2);
+ if (ret < 0) {
+ dev_err(gpadc->dev,
+ "gpadc_conversion: read sw high data 2 failed\n");
+ goto out;
+ }
+ if (ibat != NULL) {
+ *ibat = (high_data2 << 8) | low_data2;
+ } else {
+ dev_warn(gpadc->dev,
+ "gpadc_conversion: ibat not stored\n");
+ }
+
+ }
+ }
+
/* Disable GPADC */
ret = abx500_set_register_interruptible(gpadc->dev, AB8500_GPADC,
AB8500_GPADC_CTRL1_REG, DIS_GPADC);
@@ -406,6 +570,7 @@ int ab8500_gpadc_read_raw(struct ab8500_gpadc *gpadc, u8 channel)
goto out;
}
+ /* Disable VTVout LDO this is required for GPADC */
pm_runtime_mark_last_busy(gpadc->dev);
pm_runtime_put_autosuspend(gpadc->dev);
@@ -422,9 +587,7 @@ out:
*/
(void) abx500_set_register_interruptible(gpadc->dev, AB8500_GPADC,
AB8500_GPADC_CTRL1_REG, DIS_GPADC);
-
pm_runtime_put(gpadc->dev);
-
mutex_unlock(&gpadc->ab8500_gpadc_lock);
dev_err(gpadc->dev,
"gpadc_conversion: Failed to AD convert channel %d\n", channel);
@@ -433,16 +596,16 @@ out:
EXPORT_SYMBOL(ab8500_gpadc_read_raw);
/**
- * ab8500_bm_gpswadcconvend_handler() - isr for s/w gpadc conversion completion
+ * ab8500_bm_gpadcconvend_handler() - isr for gpadc conversion completion
* @irq: irq number
* @data: pointer to the data passed during request irq
*
- * This is a interrupt service routine for s/w gpadc conversion completion.
+ * This is a interrupt service routine for gpadc conversion completion.
* Notifies the gpadc completion is completed and the converted raw value
* can be read from the registers.
* Returns IRQ status(IRQ_HANDLED)
*/
-static irqreturn_t ab8500_bm_gpswadcconvend_handler(int irq, void *_gpadc)
+static irqreturn_t ab8500_bm_gpadcconvend_handler(int irq, void *_gpadc)
{
struct ab8500_gpadc *gpadc = _gpadc;
@@ -461,15 +624,27 @@ static int otp_cal_regs[] = {
AB8500_GPADC_CAL_7,
};
+static int otp4_cal_regs[] = {
+ AB8540_GPADC_OTP4_REG_7,
+ AB8540_GPADC_OTP4_REG_6,
+ AB8540_GPADC_OTP4_REG_5,
+};
+
static void ab8500_gpadc_read_calibration_data(struct ab8500_gpadc *gpadc)
{
int i;
int ret[ARRAY_SIZE(otp_cal_regs)];
u8 gpadc_cal[ARRAY_SIZE(otp_cal_regs)];
-
+ int ret_otp4[ARRAY_SIZE(otp4_cal_regs)];
+ u8 gpadc_otp4[ARRAY_SIZE(otp4_cal_regs)];
int vmain_high, vmain_low;
int btemp_high, btemp_low;
int vbat_high, vbat_low;
+ int ibat_high, ibat_low;
+ s64 V_gain, V_offset, V2A_gain, V2A_offset;
+ struct ab8500 *ab8500;
+
+ ab8500 = gpadc->parent;
/* First we read all OTP registers and store the error code */
for (i = 0; i < ARRAY_SIZE(otp_cal_regs); i++) {
@@ -489,7 +664,7 @@ static void ab8500_gpadc_read_calibration_data(struct ab8500_gpadc *gpadc)
* bt_h/l = btemp_high/low
* vb_h/l = vbat_high/low
*
- * Data bits:
+ * Data bits 8500/9540:
* | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0
* |.......|.......|.......|.......|.......|.......|.......|.......
* | | vm_h9 | vm_h8
@@ -507,6 +682,35 @@ static void ab8500_gpadc_read_calibration_data(struct ab8500_gpadc *gpadc)
* | vb_l5 | vb_l4 | vb_l3 | vb_l2 | vb_l1 | vb_l0 |
* |.......|.......|.......|.......|.......|.......|.......|.......
*
+ * Data bits 8540:
+ * OTP2
+ * | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0
+ * |.......|.......|.......|.......|.......|.......|.......|.......
+ * |
+ * |.......|.......|.......|.......|.......|.......|.......|.......
+ * | vm_h9 | vm_h8 | vm_h7 | vm_h6 | vm_h5 | vm_h4 | vm_h3 | vm_h2
+ * |.......|.......|.......|.......|.......|.......|.......|.......
+ * | vm_h1 | vm_h0 | vm_l4 | vm_l3 | vm_l2 | vm_l1 | vm_l0 | bt_h9
+ * |.......|.......|.......|.......|.......|.......|.......|.......
+ * | bt_h8 | bt_h7 | bt_h6 | bt_h5 | bt_h4 | bt_h3 | bt_h2 | bt_h1
+ * |.......|.......|.......|.......|.......|.......|.......|.......
+ * | bt_h0 | bt_l4 | bt_l3 | bt_l2 | bt_l1 | bt_l0 | vb_h9 | vb_h8
+ * |.......|.......|.......|.......|.......|.......|.......|.......
+ * | vb_h7 | vb_h6 | vb_h5 | vb_h4 | vb_h3 | vb_h2 | vb_h1 | vb_h0
+ * |.......|.......|.......|.......|.......|.......|.......|.......
+ * | vb_l5 | vb_l4 | vb_l3 | vb_l2 | vb_l1 | vb_l0 |
+ * |.......|.......|.......|.......|.......|.......|.......|.......
+ *
+ * Data bits 8540:
+ * OTP4
+ * | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0
+ * |.......|.......|.......|.......|.......|.......|.......|.......
+ * | | ib_h9 | ib_h8 | ib_h7
+ * |.......|.......|.......|.......|.......|.......|.......|.......
+ * | ib_h6 | ib_h5 | ib_h4 | ib_h3 | ib_h2 | ib_h1 | ib_h0 | ib_l5
+ * |.......|.......|.......|.......|.......|.......|.......|.......
+ * | ib_l4 | ib_l3 | ib_l2 | ib_l1 | ib_l0 |
+ *
*
* Ideal output ADC codes corresponding to injected input voltages
* during manufacturing is:
@@ -519,38 +723,116 @@ static void ab8500_gpadc_read_calibration_data(struct ab8500_gpadc *gpadc)
* vbat_low: Vin = 2380mV / ADC ideal code = 33
*/
- /* Calculate gain and offset for VMAIN if all reads succeeded */
- if (!(ret[0] < 0 || ret[1] < 0 || ret[2] < 0)) {
- vmain_high = (((gpadc_cal[0] & 0x03) << 8) |
- ((gpadc_cal[1] & 0x3F) << 2) |
- ((gpadc_cal[2] & 0xC0) >> 6));
+ if (is_ab8540(ab8500)) {
+ /* Calculate gain and offset for VMAIN if all reads succeeded*/
+ if (!(ret[1] < 0 || ret[2] < 0)) {
+ vmain_high = (((gpadc_cal[1] & 0xFF) << 2) |
+ ((gpadc_cal[2] & 0xC0) >> 6));
+ vmain_low = ((gpadc_cal[2] & 0x3E) >> 1);
+
+ gpadc->cal_data[ADC_INPUT_VMAIN].otp_calib_hi =
+ (u16)vmain_high;
+ gpadc->cal_data[ADC_INPUT_VMAIN].otp_calib_lo =
+ (u16)vmain_low;
+
+ gpadc->cal_data[ADC_INPUT_VMAIN].gain = CALIB_SCALE *
+ (19500 - 315) / (vmain_high - vmain_low);
+ gpadc->cal_data[ADC_INPUT_VMAIN].offset = CALIB_SCALE *
+ 19500 - (CALIB_SCALE * (19500 - 315) /
+ (vmain_high - vmain_low)) * vmain_high;
+ } else {
+ gpadc->cal_data[ADC_INPUT_VMAIN].gain = 0;
+ }
- vmain_low = ((gpadc_cal[2] & 0x3E) >> 1);
+ /* Read IBAT calibration Data */
+ for (i = 0; i < ARRAY_SIZE(otp4_cal_regs); i++) {
+ ret_otp4[i] = abx500_get_register_interruptible(
+ gpadc->dev, AB8500_OTP_EMUL,
+ otp4_cal_regs[i], &gpadc_otp4[i]);
+ if (ret_otp4[i] < 0)
+ dev_err(gpadc->dev,
+ "%s: read otp4 reg 0x%02x failed\n",
+ __func__, otp4_cal_regs[i]);
+ }
- gpadc->cal_data[ADC_INPUT_VMAIN].gain = CALIB_SCALE *
- (19500 - 315) / (vmain_high - vmain_low);
+ /* Calculate gain and offset for IBAT if all reads succeeded */
+ if (!(ret_otp4[0] < 0 || ret_otp4[1] < 0 || ret_otp4[2] < 0)) {
+ ibat_high = (((gpadc_otp4[0] & 0x07) << 7) |
+ ((gpadc_otp4[1] & 0xFE) >> 1));
+ ibat_low = (((gpadc_otp4[1] & 0x01) << 5) |
+ ((gpadc_otp4[2] & 0xF8) >> 3));
+
+ gpadc->cal_data[ADC_INPUT_IBAT].otp_calib_hi =
+ (u16)ibat_high;
+ gpadc->cal_data[ADC_INPUT_IBAT].otp_calib_lo =
+ (u16)ibat_low;
+
+ V_gain = ((IBAT_VDROP_H - IBAT_VDROP_L)
+ << CALIB_SHIFT_IBAT) / (ibat_high - ibat_low);
+
+ V_offset = (IBAT_VDROP_H << CALIB_SHIFT_IBAT) -
+ (((IBAT_VDROP_H - IBAT_VDROP_L) <<
+ CALIB_SHIFT_IBAT) / (ibat_high - ibat_low))
+ * ibat_high;
+ /*
+ * Result obtained is in mV (at a scale factor),
+ * we need to calculate gain and offset to get mA
+ */
+ V2A_gain = (ADC_CH_IBAT_MAX - ADC_CH_IBAT_MIN)/
+ (ADC_CH_IBAT_MAX_V - ADC_CH_IBAT_MIN_V);
+ V2A_offset = ((ADC_CH_IBAT_MAX_V * ADC_CH_IBAT_MIN -
+ ADC_CH_IBAT_MAX * ADC_CH_IBAT_MIN_V)
+ << CALIB_SHIFT_IBAT)
+ / (ADC_CH_IBAT_MAX_V - ADC_CH_IBAT_MIN_V);
+
+ gpadc->cal_data[ADC_INPUT_IBAT].gain = V_gain * V2A_gain;
+ gpadc->cal_data[ADC_INPUT_IBAT].offset = V_offset *
+ V2A_gain + V2A_offset;
+ } else {
+ gpadc->cal_data[ADC_INPUT_IBAT].gain = 0;
+ }
- gpadc->cal_data[ADC_INPUT_VMAIN].offset = CALIB_SCALE * 19500 -
- (CALIB_SCALE * (19500 - 315) /
- (vmain_high - vmain_low)) * vmain_high;
+ dev_dbg(gpadc->dev, "IBAT gain %llu offset %llu\n",
+ gpadc->cal_data[ADC_INPUT_IBAT].gain,
+ gpadc->cal_data[ADC_INPUT_IBAT].offset);
} else {
- gpadc->cal_data[ADC_INPUT_VMAIN].gain = 0;
+ /* Calculate gain and offset for VMAIN if all reads succeeded */
+ if (!(ret[0] < 0 || ret[1] < 0 || ret[2] < 0)) {
+ vmain_high = (((gpadc_cal[0] & 0x03) << 8) |
+ ((gpadc_cal[1] & 0x3F) << 2) |
+ ((gpadc_cal[2] & 0xC0) >> 6));
+ vmain_low = ((gpadc_cal[2] & 0x3E) >> 1);
+
+ gpadc->cal_data[ADC_INPUT_VMAIN].otp_calib_hi =
+ (u16)vmain_high;
+ gpadc->cal_data[ADC_INPUT_VMAIN].otp_calib_lo =
+ (u16)vmain_low;
+
+ gpadc->cal_data[ADC_INPUT_VMAIN].gain = CALIB_SCALE *
+ (19500 - 315) / (vmain_high - vmain_low);
+
+ gpadc->cal_data[ADC_INPUT_VMAIN].offset = CALIB_SCALE *
+ 19500 - (CALIB_SCALE * (19500 - 315) /
+ (vmain_high - vmain_low)) * vmain_high;
+ } else {
+ gpadc->cal_data[ADC_INPUT_VMAIN].gain = 0;
+ }
}
/* Calculate gain and offset for BTEMP if all reads succeeded */
if (!(ret[2] < 0 || ret[3] < 0 || ret[4] < 0)) {
btemp_high = (((gpadc_cal[2] & 0x01) << 9) |
- (gpadc_cal[3] << 1) |
- ((gpadc_cal[4] & 0x80) >> 7));
-
+ (gpadc_cal[3] << 1) | ((gpadc_cal[4] & 0x80) >> 7));
btemp_low = ((gpadc_cal[4] & 0x7C) >> 2);
+ gpadc->cal_data[ADC_INPUT_BTEMP].otp_calib_hi = (u16)btemp_high;
+ gpadc->cal_data[ADC_INPUT_BTEMP].otp_calib_lo = (u16)btemp_low;
+
gpadc->cal_data[ADC_INPUT_BTEMP].gain =
CALIB_SCALE * (1300 - 21) / (btemp_high - btemp_low);
-
gpadc->cal_data[ADC_INPUT_BTEMP].offset = CALIB_SCALE * 1300 -
- (CALIB_SCALE * (1300 - 21) /
- (btemp_high - btemp_low)) * btemp_high;
+ (CALIB_SCALE * (1300 - 21) / (btemp_high - btemp_low))
+ * btemp_high;
} else {
gpadc->cal_data[ADC_INPUT_BTEMP].gain = 0;
}
@@ -560,9 +842,11 @@ static void ab8500_gpadc_read_calibration_data(struct ab8500_gpadc *gpadc)
vbat_high = (((gpadc_cal[4] & 0x03) << 8) | gpadc_cal[5]);
vbat_low = ((gpadc_cal[6] & 0xFC) >> 2);
+ gpadc->cal_data[ADC_INPUT_VBAT].otp_calib_hi = (u16)vbat_high;
+ gpadc->cal_data[ADC_INPUT_VBAT].otp_calib_lo = (u16)vbat_low;
+
gpadc->cal_data[ADC_INPUT_VBAT].gain = CALIB_SCALE *
(4700 - 2380) / (vbat_high - vbat_low);
-
gpadc->cal_data[ADC_INPUT_VBAT].offset = CALIB_SCALE * 4700 -
(CALIB_SCALE * (4700 - 2380) /
(vbat_high - vbat_low)) * vbat_high;
@@ -608,6 +892,31 @@ static int ab8500_gpadc_runtime_idle(struct device *dev)
return 0;
}
+static int ab8500_gpadc_suspend(struct device *dev)
+{
+ struct ab8500_gpadc *gpadc = dev_get_drvdata(dev);
+
+ mutex_lock(&gpadc->ab8500_gpadc_lock);
+
+ pm_runtime_get_sync(dev);
+
+ regulator_disable(gpadc->regu);
+ return 0;
+}
+
+static int ab8500_gpadc_resume(struct device *dev)
+{
+ struct ab8500_gpadc *gpadc = dev_get_drvdata(dev);
+
+ regulator_enable(gpadc->regu);
+
+ pm_runtime_mark_last_busy(gpadc->dev);
+ pm_runtime_put_autosuspend(gpadc->dev);
+
+ mutex_unlock(&gpadc->ab8500_gpadc_lock);
+ return 0;
+}
+
static int ab8500_gpadc_probe(struct platform_device *pdev)
{
int ret = 0;
@@ -619,13 +928,13 @@ static int ab8500_gpadc_probe(struct platform_device *pdev)
return -ENOMEM;
}
- gpadc->irq = platform_get_irq_byname(pdev, "SW_CONV_END");
- if (gpadc->irq < 0) {
- dev_err(&pdev->dev, "failed to get platform irq-%d\n",
- gpadc->irq);
- ret = gpadc->irq;
- goto fail;
- }
+ gpadc->irq_sw = platform_get_irq_byname(pdev, "SW_CONV_END");
+ if (gpadc->irq_sw < 0)
+ dev_err(gpadc->dev, "failed to get platform sw_conv_end irq\n");
+
+ gpadc->irq_hw = platform_get_irq_byname(pdev, "HW_CONV_END");
+ if (gpadc->irq_hw < 0)
+ dev_err(gpadc->dev, "failed to get platform hw_conv_end irq\n");
gpadc->dev = &pdev->dev;
gpadc->parent = dev_get_drvdata(pdev->dev.parent);
@@ -634,15 +943,31 @@ static int ab8500_gpadc_probe(struct platform_device *pdev)
/* Initialize completion used to notify completion of conversion */
init_completion(&gpadc->ab8500_gpadc_complete);
- /* Register interrupt - SwAdcComplete */
- ret = request_threaded_irq(gpadc->irq, NULL,
- ab8500_bm_gpswadcconvend_handler,
- IRQF_ONESHOT | IRQF_NO_SUSPEND | IRQF_SHARED,
- "ab8500-gpadc", gpadc);
- if (ret < 0) {
- dev_err(gpadc->dev, "Failed to register interrupt, irq: %d\n",
- gpadc->irq);
- goto fail;
+ /* Register interrupts */
+ if (gpadc->irq_sw >= 0) {
+ ret = request_threaded_irq(gpadc->irq_sw, NULL,
+ ab8500_bm_gpadcconvend_handler,
+ IRQF_NO_SUSPEND | IRQF_SHARED, "ab8500-gpadc-sw",
+ gpadc);
+ if (ret < 0) {
+ dev_err(gpadc->dev,
+ "Failed to register interrupt irq: %d\n",
+ gpadc->irq_sw);
+ goto fail;
+ }
+ }
+
+ if (gpadc->irq_hw >= 0) {
+ ret = request_threaded_irq(gpadc->irq_hw, NULL,
+ ab8500_bm_gpadcconvend_handler,
+ IRQF_NO_SUSPEND | IRQF_SHARED, "ab8500-gpadc-hw",
+ gpadc);
+ if (ret < 0) {
+ dev_err(gpadc->dev,
+ "Failed to register interrupt irq: %d\n",
+ gpadc->irq_hw);
+ goto fail_irq;
+ }
}
/* VTVout LDO used to power up ab8500-GPADC */
@@ -669,11 +994,13 @@ static int ab8500_gpadc_probe(struct platform_device *pdev)
ab8500_gpadc_read_calibration_data(gpadc);
list_add_tail(&gpadc->node, &ab8500_gpadc_list);
dev_dbg(gpadc->dev, "probe success\n");
+
return 0;
fail_enable:
fail_irq:
- free_irq(gpadc->irq, gpadc);
+ free_irq(gpadc->irq_sw, gpadc);
+ free_irq(gpadc->irq_hw, gpadc);
fail:
kfree(gpadc);
gpadc = NULL;
@@ -687,7 +1014,10 @@ static int ab8500_gpadc_remove(struct platform_device *pdev)
/* remove this gpadc entry from the list */
list_del(&gpadc->node);
/* remove interrupt - completion of Sw ADC conversion */
- free_irq(gpadc->irq, gpadc);
+ if (gpadc->irq_sw >= 0)
+ free_irq(gpadc->irq_sw, gpadc);
+ if (gpadc->irq_hw >= 0)
+ free_irq(gpadc->irq_hw, gpadc);
pm_runtime_get_sync(gpadc->dev);
pm_runtime_disable(gpadc->dev);
@@ -707,6 +1037,9 @@ static const struct dev_pm_ops ab8500_gpadc_pm_ops = {
SET_RUNTIME_PM_OPS(ab8500_gpadc_runtime_suspend,
ab8500_gpadc_runtime_resume,
ab8500_gpadc_runtime_idle)
+ SET_SYSTEM_SLEEP_PM_OPS(ab8500_gpadc_suspend,
+ ab8500_gpadc_resume)
+
};
static struct platform_driver ab8500_gpadc_driver = {
@@ -729,10 +1062,30 @@ static void __exit ab8500_gpadc_exit(void)
platform_driver_unregister(&ab8500_gpadc_driver);
}
+/**
+ * ab8540_gpadc_get_otp() - returns OTP values
+ *
+ */
+void ab8540_gpadc_get_otp(struct ab8500_gpadc *gpadc,
+ u16 *vmain_l, u16 *vmain_h, u16 *btemp_l, u16 *btemp_h,
+ u16 *vbat_l, u16 *vbat_h, u16 *ibat_l, u16 *ibat_h)
+{
+ *vmain_l = gpadc->cal_data[ADC_INPUT_VMAIN].otp_calib_lo;
+ *vmain_h = gpadc->cal_data[ADC_INPUT_VMAIN].otp_calib_hi;
+ *btemp_l = gpadc->cal_data[ADC_INPUT_BTEMP].otp_calib_lo;
+ *btemp_h = gpadc->cal_data[ADC_INPUT_BTEMP].otp_calib_hi;
+ *vbat_l = gpadc->cal_data[ADC_INPUT_VBAT].otp_calib_lo;
+ *vbat_h = gpadc->cal_data[ADC_INPUT_VBAT].otp_calib_hi;
+ *ibat_l = gpadc->cal_data[ADC_INPUT_IBAT].otp_calib_lo;
+ *ibat_h = gpadc->cal_data[ADC_INPUT_IBAT].otp_calib_hi;
+ return ;
+}
+
subsys_initcall_sync(ab8500_gpadc_init);
module_exit(ab8500_gpadc_exit);
MODULE_LICENSE("GPL v2");
-MODULE_AUTHOR("Arun R Murthy, Daniel Willerud, Johan Palsson");
+MODULE_AUTHOR("Arun R Murthy, Daniel Willerud, Johan Palsson,"
+ "M'boumba Cedric Madianga");
MODULE_ALIAS("platform:ab8500_gpadc");
MODULE_DESCRIPTION("AB8500 GPADC driver");
diff --git a/drivers/mfd/ab8500-sysctrl.c b/drivers/mfd/ab8500-sysctrl.c
index 108fd86552f0..272479cdb107 100644
--- a/drivers/mfd/ab8500-sysctrl.c
+++ b/drivers/mfd/ab8500-sysctrl.c
@@ -15,19 +15,30 @@
#include <linux/mfd/abx500/ab8500.h>
#include <linux/mfd/abx500/ab8500-sysctrl.h>
+/* RtcCtrl bits */
+#define AB8500_ALARM_MIN_LOW 0x08
+#define AB8500_ALARM_MIN_MID 0x09
+#define RTC_CTRL 0x0B
+#define RTC_ALARM_ENABLE 0x4
+
static struct device *sysctrl_dev;
void ab8500_power_off(void)
{
sigset_t old;
sigset_t all;
- static char *pss[] = {"ab8500_ac", "ab8500_usb"};
+ static char *pss[] = {"ab8500_ac", "pm2301", "ab8500_usb"};
int i;
bool charger_present = false;
union power_supply_propval val;
struct power_supply *psy;
int ret;
+ if (sysctrl_dev == NULL) {
+ pr_err("%s: sysctrl not initialized\n", __func__);
+ return;
+ }
+
/*
* If we have a charger connected and we're powering off,
* reboot into charge-only mode.
@@ -74,6 +85,63 @@ shutdown:
}
}
+/*
+ * Use the AB WD to reset the platform. It will perform a hard
+ * reset instead of a soft reset. Write the reset reason to
+ * the AB before reset, which can be read upon restart.
+ */
+void ab8500_restart(char mode, const char *cmd)
+{
+ struct ab8500_platform_data *plat;
+ struct ab8500_sysctrl_platform_data *pdata;
+ u16 reason = 0;
+ u8 val;
+
+ if (sysctrl_dev == NULL) {
+ pr_err("%s: sysctrl not initialized\n", __func__);
+ return;
+ }
+
+ plat = dev_get_platdata(sysctrl_dev->parent);
+ pdata = plat->sysctrl;
+ if (pdata->reboot_reason_code)
+ reason = pdata->reboot_reason_code(cmd);
+ else
+ pr_warn("[%s] No reboot reason set. Default reason %d\n",
+ __func__, reason);
+
+ /*
+ * Disable RTC alarm, just a precaution so that no alarm
+ * is running when WD reset is executed.
+ */
+ abx500_get_register_interruptible(sysctrl_dev, AB8500_RTC,
+ RTC_CTRL , &val);
+ abx500_set_register_interruptible(sysctrl_dev, AB8500_RTC,
+ RTC_CTRL , (val & ~RTC_ALARM_ENABLE));
+
+ /*
+ * Android is not using the RTC alarm registers during reboot
+ * so we borrow them for writing the reason of reset
+ */
+
+ /* reason[8 LSB] */
+ val = reason & 0xFF;
+ abx500_set_register_interruptible(sysctrl_dev, AB8500_RTC,
+ AB8500_ALARM_MIN_LOW , val);
+
+ /* reason[8 MSB] */
+ val = (reason>>8) & 0xFF;
+ abx500_set_register_interruptible(sysctrl_dev, AB8500_RTC,
+ AB8500_ALARM_MIN_MID , val);
+
+ /* Setting WD timeout to 0 */
+ ab8500_sysctrl_write(AB8500_MAINWDOGTIMER, 0xFF, 0x0);
+
+ /* Setting the parameters to AB8500 WD*/
+ ab8500_sysctrl_write(AB8500_MAINWDOGCTRL, 0xFF, (AB8500_ENABLE_WD |
+ AB8500_WD_RESTART_ON_EXPIRE | AB8500_KICK_WD));
+}
+
static inline bool valid_bank(u8 bank)
{
return ((bank == AB8500_SYS_CTRL1_BLOCK) ||
@@ -85,7 +153,7 @@ int ab8500_sysctrl_read(u16 reg, u8 *value)
u8 bank;
if (sysctrl_dev == NULL)
- return -EAGAIN;
+ return -EINVAL;
bank = (reg >> 8);
if (!valid_bank(bank))
@@ -101,7 +169,7 @@ int ab8500_sysctrl_write(u16 reg, u8 mask, u8 value)
u8 bank;
if (sysctrl_dev == NULL)
- return -EAGAIN;
+ return -EINVAL;
bank = (reg >> 8);
if (!valid_bank(bank))
@@ -114,28 +182,36 @@ EXPORT_SYMBOL(ab8500_sysctrl_write);
static int ab8500_sysctrl_probe(struct platform_device *pdev)
{
+ struct ab8500 *ab8500 = dev_get_drvdata(pdev->dev.parent);
struct ab8500_platform_data *plat;
struct ab8500_sysctrl_platform_data *pdata;
- sysctrl_dev = &pdev->dev;
plat = dev_get_platdata(pdev->dev.parent);
+
+ if (!(plat && plat->sysctrl))
+ return -EINVAL;
+
if (plat->pm_power_off)
pm_power_off = ab8500_power_off;
pdata = plat->sysctrl;
if (pdata) {
- int ret, i, j;
+ int last, ret, i, j;
+
+ if (is_ab8505(ab8500))
+ last = AB8500_SYSCLKREQ4RFCLKBUF;
+ else
+ last = AB8500_SYSCLKREQ8RFCLKBUF;
- for (i = AB8500_SYSCLKREQ1RFCLKBUF;
- i <= AB8500_SYSCLKREQ8RFCLKBUF; i++) {
+ for (i = AB8500_SYSCLKREQ1RFCLKBUF; i <= last; i++) {
j = i - AB8500_SYSCLKREQ1RFCLKBUF;
ret = ab8500_sysctrl_write(i, 0xff,
- pdata->initial_req_buf_config[j]);
+ pdata->initial_req_buf_config[j]);
dev_dbg(&pdev->dev,
- "Setting SysClkReq%dRfClkBuf 0x%X\n",
- j + 1,
- pdata->initial_req_buf_config[j]);
+ "Setting SysClkReq%dRfClkBuf 0x%X\n",
+ j + 1,
+ pdata->initial_req_buf_config[j]);
if (ret < 0) {
dev_err(&pdev->dev,
"unable to set sysClkReq%dRfClkBuf: "
diff --git a/drivers/power/88pm860x_charger.c b/drivers/power/88pm860x_charger.c
index 4b37a5af8deb..36fb4b5a4b0d 100644
--- a/drivers/power/88pm860x_charger.c
+++ b/drivers/power/88pm860x_charger.c
@@ -714,7 +714,6 @@ out_irq:
while (--i >= 0)
free_irq(info->irq[i], info);
out:
- kfree(info);
return ret;
}
@@ -728,7 +727,6 @@ static int pm860x_charger_remove(struct platform_device *pdev)
free_irq(info->irq[0], info);
for (i = 0; i < info->irq_nums; i++)
free_irq(info->irq[i], info);
- kfree(info);
return 0;
}
diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig
index ffe02fb7cbc7..0d0b5d7d19d0 100644
--- a/drivers/power/Kconfig
+++ b/drivers/power/Kconfig
@@ -340,6 +340,13 @@ config CHARGER_SMB347
Say Y to include support for Summit Microelectronics SMB347
Battery Charger.
+config CHARGER_TPS65090
+ tristate "TPS65090 battery charger driver"
+ depends on MFD_TPS65090
+ help
+ Say Y here to enable support for battery charging with TPS65090
+ PMIC chips.
+
config AB8500_BM
bool "AB8500 Battery Management Driver"
depends on AB8500_CORE && AB8500_GPADC
@@ -353,13 +360,6 @@ config BATTERY_GOLDFISH
Say Y to enable support for the battery and AC power in the
Goldfish emulator.
-config CHARGER_PM2301
- bool "PM2301 Battery Charger Driver"
- depends on AB8500_BM
- help
- Say Y to include support for PM2301 charger driver.
- Depends on AB8500 battery management core.
-
source "drivers/power/reset/Kconfig"
endif # POWER_SUPPLY
diff --git a/drivers/power/Makefile b/drivers/power/Makefile
index 3f66436af45c..653bf6ceff30 100644
--- a/drivers/power/Makefile
+++ b/drivers/power/Makefile
@@ -39,7 +39,7 @@ obj-$(CONFIG_CHARGER_PCF50633) += pcf50633-charger.o
obj-$(CONFIG_BATTERY_JZ4740) += jz4740-battery.o
obj-$(CONFIG_BATTERY_INTEL_MID) += intel_mid_battery.o
obj-$(CONFIG_BATTERY_RX51) += rx51_battery.o
-obj-$(CONFIG_AB8500_BM) += ab8500_bmdata.o ab8500_charger.o ab8500_fg.o ab8500_btemp.o abx500_chargalg.o
+obj-$(CONFIG_AB8500_BM) += ab8500_bmdata.o ab8500_charger.o ab8500_fg.o ab8500_btemp.o abx500_chargalg.o pm2301_charger.o
obj-$(CONFIG_CHARGER_ISP1704) += isp1704_charger.o
obj-$(CONFIG_CHARGER_MAX8903) += max8903_charger.o
obj-$(CONFIG_CHARGER_TWL4030) += twl4030_charger.o
@@ -47,10 +47,10 @@ obj-$(CONFIG_CHARGER_LP8727) += lp8727_charger.o
obj-$(CONFIG_CHARGER_LP8788) += lp8788-charger.o
obj-$(CONFIG_CHARGER_GPIO) += gpio-charger.o
obj-$(CONFIG_CHARGER_MANAGER) += charger-manager.o
-obj-$(CONFIG_CHARGER_PM2301) += pm2301_charger.o
obj-$(CONFIG_CHARGER_MAX8997) += max8997_charger.o
obj-$(CONFIG_CHARGER_MAX8998) += max8998_charger.o
obj-$(CONFIG_CHARGER_BQ2415X) += bq2415x_charger.o
obj-$(CONFIG_POWER_AVS) += avs/
obj-$(CONFIG_CHARGER_SMB347) += smb347-charger.o
+obj-$(CONFIG_CHARGER_TPS65090) += tps65090-charger.o
obj-$(CONFIG_POWER_RESET) += reset/
diff --git a/drivers/power/ab8500_bmdata.c b/drivers/power/ab8500_bmdata.c
index 7a96c0650fbb..d29864533093 100644
--- a/drivers/power/ab8500_bmdata.c
+++ b/drivers/power/ab8500_bmdata.c
@@ -11,7 +11,7 @@
* Note that the res_to_temp table must be strictly sorted by falling resistance
* values to work.
*/
-static struct abx500_res_to_temp temp_tbl_A_thermistor[] = {
+const struct abx500_res_to_temp ab8500_temp_tbl_a_thermistor[] = {
{-5, 53407},
{ 0, 48594},
{ 5, 43804},
@@ -28,8 +28,12 @@ static struct abx500_res_to_temp temp_tbl_A_thermistor[] = {
{60, 13437},
{65, 12500},
};
+EXPORT_SYMBOL(ab8500_temp_tbl_a_thermistor);
-static struct abx500_res_to_temp temp_tbl_B_thermistor[] = {
+const int ab8500_temp_tbl_a_size = ARRAY_SIZE(ab8500_temp_tbl_a_thermistor);
+EXPORT_SYMBOL(ab8500_temp_tbl_a_size);
+
+const struct abx500_res_to_temp ab8500_temp_tbl_b_thermistor[] = {
{-5, 200000},
{ 0, 159024},
{ 5, 151921},
@@ -46,8 +50,12 @@ static struct abx500_res_to_temp temp_tbl_B_thermistor[] = {
{60, 85461},
{65, 82869},
};
+EXPORT_SYMBOL(ab8500_temp_tbl_b_thermistor);
+
+const int ab8500_temp_tbl_b_size = ARRAY_SIZE(ab8500_temp_tbl_b_thermistor);
+EXPORT_SYMBOL(ab8500_temp_tbl_b_size);
-static struct abx500_v_to_cap cap_tbl_A_thermistor[] = {
+static const struct abx500_v_to_cap cap_tbl_a_thermistor[] = {
{4171, 100},
{4114, 95},
{4009, 83},
@@ -70,7 +78,7 @@ static struct abx500_v_to_cap cap_tbl_A_thermistor[] = {
{3247, 0},
};
-static struct abx500_v_to_cap cap_tbl_B_thermistor[] = {
+static const struct abx500_v_to_cap cap_tbl_b_thermistor[] = {
{4161, 100},
{4124, 98},
{4044, 90},
@@ -93,7 +101,7 @@ static struct abx500_v_to_cap cap_tbl_B_thermistor[] = {
{3250, 0},
};
-static struct abx500_v_to_cap cap_tbl[] = {
+static const struct abx500_v_to_cap cap_tbl[] = {
{4186, 100},
{4163, 99},
{4114, 95},
@@ -124,7 +132,7 @@ static struct abx500_v_to_cap cap_tbl[] = {
* Note that the res_to_temp table must be strictly sorted by falling
* resistance values to work.
*/
-static struct abx500_res_to_temp temp_tbl[] = {
+static const struct abx500_res_to_temp temp_tbl[] = {
{-5, 214834},
{ 0, 162943},
{ 5, 124820},
@@ -146,7 +154,7 @@ static struct abx500_res_to_temp temp_tbl[] = {
* Note that the batres_vs_temp table must be strictly sorted by falling
* temperature values to work.
*/
-static struct batres_vs_temp temp_to_batres_tbl_thermistor[] = {
+static const struct batres_vs_temp temp_to_batres_tbl_thermistor[] = {
{ 40, 120},
{ 30, 135},
{ 20, 165},
@@ -160,7 +168,7 @@ static struct batres_vs_temp temp_to_batres_tbl_thermistor[] = {
* Note that the batres_vs_temp table must be strictly sorted by falling
* temperature values to work.
*/
-static struct batres_vs_temp temp_to_batres_tbl_ext_thermistor[] = {
+static const struct batres_vs_temp temp_to_batres_tbl_ext_thermistor[] = {
{ 60, 300},
{ 30, 300},
{ 20, 300},
@@ -171,7 +179,7 @@ static struct batres_vs_temp temp_to_batres_tbl_ext_thermistor[] = {
};
/* battery resistance table for LI ION 9100 battery */
-static struct batres_vs_temp temp_to_batres_tbl_9100[] = {
+static const struct batres_vs_temp temp_to_batres_tbl_9100[] = {
{ 60, 180},
{ 30, 180},
{ 20, 180},
@@ -230,10 +238,10 @@ static struct abx500_battery_type bat_type_thermistor[] = {
.maint_b_chg_timer_h = 200,
.low_high_cur_lvl = 300,
.low_high_vol_lvl = 4000,
- .n_temp_tbl_elements = ARRAY_SIZE(temp_tbl_A_thermistor),
- .r_to_t_tbl = temp_tbl_A_thermistor,
- .n_v_cap_tbl_elements = ARRAY_SIZE(cap_tbl_A_thermistor),
- .v_to_cap_tbl = cap_tbl_A_thermistor,
+ .n_temp_tbl_elements = ARRAY_SIZE(ab8500_temp_tbl_a_thermistor),
+ .r_to_t_tbl = ab8500_temp_tbl_a_thermistor,
+ .n_v_cap_tbl_elements = ARRAY_SIZE(cap_tbl_a_thermistor),
+ .v_to_cap_tbl = cap_tbl_a_thermistor,
.n_batres_tbl_elements = ARRAY_SIZE(temp_to_batres_tbl_thermistor),
.batres_tbl = temp_to_batres_tbl_thermistor,
@@ -258,10 +266,10 @@ static struct abx500_battery_type bat_type_thermistor[] = {
.maint_b_chg_timer_h = 200,
.low_high_cur_lvl = 300,
.low_high_vol_lvl = 4000,
- .n_temp_tbl_elements = ARRAY_SIZE(temp_tbl_B_thermistor),
- .r_to_t_tbl = temp_tbl_B_thermistor,
- .n_v_cap_tbl_elements = ARRAY_SIZE(cap_tbl_B_thermistor),
- .v_to_cap_tbl = cap_tbl_B_thermistor,
+ .n_temp_tbl_elements = ARRAY_SIZE(ab8500_temp_tbl_b_thermistor),
+ .r_to_t_tbl = ab8500_temp_tbl_b_thermistor,
+ .n_v_cap_tbl_elements = ARRAY_SIZE(cap_tbl_b_thermistor),
+ .v_to_cap_tbl = cap_tbl_b_thermistor,
.n_batres_tbl_elements = ARRAY_SIZE(temp_to_batres_tbl_thermistor),
.batres_tbl = temp_to_batres_tbl_thermistor,
},
@@ -407,15 +415,27 @@ static const struct abx500_fg_parameters fg = {
.battok_raising_th_sel1 = 2860,
.maint_thres = 95,
.user_cap_limit = 15,
+ .pcut_enable = 1,
+ .pcut_max_time = 127,
+ .pcut_flag_time = 112,
+ .pcut_max_restart = 15,
+ .pcut_debounce_time = 2,
};
-static const struct abx500_maxim_parameters maxi_params = {
+static const struct abx500_maxim_parameters ab8500_maxi_params = {
.ena_maxi = true,
.chg_curr = 910,
.wait_cycles = 10,
.charger_curr_step = 100,
};
+static const struct abx500_maxim_parameters abx540_maxi_params = {
+ .ena_maxi = true,
+ .chg_curr = 3000,
+ .wait_cycles = 10,
+ .charger_curr_step = 200,
+};
+
static const struct abx500_bm_charger_parameters chg = {
.usb_volt_max = 5500,
.usb_curr_max = 1500,
@@ -423,6 +443,46 @@ static const struct abx500_bm_charger_parameters chg = {
.ac_curr_max = 1500,
};
+/*
+ * This array maps the raw hex value to charger output current used by the
+ * AB8500 values
+ */
+static int ab8500_charge_output_curr_map[] = {
+ 100, 200, 300, 400, 500, 600, 700, 800,
+ 900, 1000, 1100, 1200, 1300, 1400, 1500, 1500,
+};
+
+static int ab8540_charge_output_curr_map[] = {
+ 0, 0, 0, 75, 100, 125, 150, 175,
+ 200, 225, 250, 275, 300, 325, 350, 375,
+ 400, 425, 450, 475, 500, 525, 550, 575,
+ 600, 625, 650, 675, 700, 725, 750, 775,
+ 800, 825, 850, 875, 900, 925, 950, 975,
+ 1000, 1025, 1050, 1075, 1100, 1125, 1150, 1175,
+ 1200, 1225, 1250, 1275, 1300, 1325, 1350, 1375,
+ 1400, 1425, 1450, 1500, 1600, 1700, 1900, 2000,
+};
+
+/*
+ * This array maps the raw hex value to charger input current used by the
+ * AB8500 values
+ */
+static int ab8500_charge_input_curr_map[] = {
+ 50, 98, 193, 290, 380, 450, 500, 600,
+ 700, 800, 900, 1000, 1100, 1300, 1400, 1500,
+};
+
+static int ab8540_charge_input_curr_map[] = {
+ 25, 50, 75, 100, 125, 150, 175, 200,
+ 225, 250, 275, 300, 325, 350, 375, 400,
+ 425, 450, 475, 500, 525, 550, 575, 600,
+ 625, 650, 675, 700, 725, 750, 775, 800,
+ 825, 850, 875, 900, 925, 950, 975, 1000,
+ 1025, 1050, 1075, 1100, 1125, 1150, 1175, 1200,
+ 1225, 1250, 1275, 1300, 1325, 1350, 1375, 1400,
+ 1425, 1450, 1475, 1500, 1500, 1500, 1500, 1500,
+};
+
struct abx500_bm_data ab8500_bm_data = {
.temp_under = 3,
.temp_low = 8,
@@ -442,22 +502,60 @@ struct abx500_bm_data ab8500_bm_data = {
.fg_res = 100,
.cap_levels = &cap_levels,
.bat_type = bat_type_thermistor,
- .n_btypes = 3,
+ .n_btypes = ARRAY_SIZE(bat_type_thermistor),
.batt_id = 0,
.interval_charging = 5,
.interval_not_charging = 120,
.temp_hysteresis = 3,
.gnd_lift_resistance = 34,
- .maxi = &maxi_params,
+ .chg_output_curr = ab8500_charge_output_curr_map,
+ .n_chg_out_curr = ARRAY_SIZE(ab8500_charge_output_curr_map),
+ .maxi = &ab8500_maxi_params,
.chg_params = &chg,
.fg_params = &fg,
+ .chg_input_curr = ab8500_charge_input_curr_map,
+ .n_chg_in_curr = ARRAY_SIZE(ab8500_charge_input_curr_map),
+};
+
+struct abx500_bm_data ab8540_bm_data = {
+ .temp_under = 3,
+ .temp_low = 8,
+ .temp_high = 43,
+ .temp_over = 48,
+ .main_safety_tmr_h = 4,
+ .temp_interval_chg = 20,
+ .temp_interval_nochg = 120,
+ .usb_safety_tmr_h = 4,
+ .bkup_bat_v = BUP_VCH_SEL_2P6V,
+ .bkup_bat_i = BUP_ICH_SEL_150UA,
+ .no_maintenance = false,
+ .capacity_scaling = false,
+ .adc_therm = ABx500_ADC_THERM_BATCTRL,
+ .chg_unknown_bat = false,
+ .enable_overshoot = false,
+ .fg_res = 100,
+ .cap_levels = &cap_levels,
+ .bat_type = bat_type_thermistor,
+ .n_btypes = ARRAY_SIZE(bat_type_thermistor),
+ .batt_id = 0,
+ .interval_charging = 5,
+ .interval_not_charging = 120,
+ .temp_hysteresis = 3,
+ .gnd_lift_resistance = 0,
+ .maxi = &abx540_maxi_params,
+ .chg_params = &chg,
+ .fg_params = &fg,
+ .chg_output_curr = ab8540_charge_output_curr_map,
+ .n_chg_out_curr = ARRAY_SIZE(ab8540_charge_output_curr_map),
+ .chg_input_curr = ab8540_charge_input_curr_map,
+ .n_chg_in_curr = ARRAY_SIZE(ab8540_charge_input_curr_map),
};
int ab8500_bm_of_probe(struct device *dev,
struct device_node *np,
struct abx500_bm_data *bm)
{
- struct batres_vs_temp *tmp_batres_tbl;
+ const struct batres_vs_temp *tmp_batres_tbl;
struct device_node *battery_node;
const char *btech;
int i;
diff --git a/drivers/power/ab8500_btemp.c b/drivers/power/ab8500_btemp.c
index 07689064996e..d412d34bf3df 100644
--- a/drivers/power/ab8500_btemp.c
+++ b/drivers/power/ab8500_btemp.c
@@ -42,6 +42,9 @@
#define BTEMP_BATCTRL_CURR_SRC_16UA 16
#define BTEMP_BATCTRL_CURR_SRC_18UA 18
+#define BTEMP_BATCTRL_CURR_SRC_60UA 60
+#define BTEMP_BATCTRL_CURR_SRC_120UA 120
+
#define to_ab8500_btemp_device_info(x) container_of((x), \
struct ab8500_btemp, btemp_psy);
@@ -76,8 +79,8 @@ struct ab8500_btemp_ranges {
* @dev: Pointer to the structure device
* @node: List of AB8500 BTEMPs, hence prepared for reentrance
* @curr_source: What current source we use, in uA
- * @bat_temp: Battery temperature in degree Celcius
- * @prev_bat_temp Last dispatched battery temperature
+ * @bat_temp: Dispatched battery temperature in degree Celcius
+ * @prev_bat_temp Last measured battery temperature in degree Celcius
* @parent: Pointer to the struct ab8500
* @gpadc: Pointer to the struct gpadc
* @fg: Pointer to the struct fg
@@ -128,6 +131,7 @@ struct ab8500_btemp *ab8500_btemp_get(void)
return btemp;
}
+EXPORT_SYMBOL(ab8500_btemp_get);
/**
* ab8500_btemp_batctrl_volt_to_res() - convert batctrl voltage to resistance
@@ -155,7 +159,7 @@ static int ab8500_btemp_batctrl_volt_to_res(struct ab8500_btemp *di,
if (di->bm->adc_therm == ABx500_ADC_THERM_BATCTRL) {
/*
* If the battery has internal NTC, we use the current
- * source to calculate the resistance, 7uA or 20uA
+ * source to calculate the resistance.
*/
rbs = (v_batctrl * 1000
- di->bm->gnd_lift_resistance * inst_curr)
@@ -216,7 +220,12 @@ static int ab8500_btemp_curr_source_enable(struct ab8500_btemp *di,
/* Only do this for batteries with internal NTC */
if (di->bm->adc_therm == ABx500_ADC_THERM_BATCTRL && enable) {
- if (is_ab9540(di->parent) || is_ab8505(di->parent)) {
+ if (is_ab8540(di->parent)) {
+ if (di->curr_source == BTEMP_BATCTRL_CURR_SRC_60UA)
+ curr = BAT_CTRL_60U_ENA;
+ else
+ curr = BAT_CTRL_120U_ENA;
+ } else if (is_ab9540(di->parent) || is_ab8505(di->parent)) {
if (di->curr_source == BTEMP_BATCTRL_CURR_SRC_16UA)
curr = BAT_CTRL_16U_ENA;
else
@@ -257,7 +266,14 @@ static int ab8500_btemp_curr_source_enable(struct ab8500_btemp *di,
} else if (di->bm->adc_therm == ABx500_ADC_THERM_BATCTRL && !enable) {
dev_dbg(di->dev, "Disable BATCTRL curr source\n");
- if (is_ab9540(di->parent) || is_ab8505(di->parent)) {
+ if (is_ab8540(di->parent)) {
+ /* Write 0 to the curr bits */
+ ret = abx500_mask_and_set_register_interruptible(
+ di->dev,
+ AB8500_CHARGER, AB8500_BAT_CTRL_CURRENT_SOURCE,
+ BAT_CTRL_60U_ENA | BAT_CTRL_120U_ENA,
+ ~(BAT_CTRL_60U_ENA | BAT_CTRL_120U_ENA));
+ } else if (is_ab9540(di->parent) || is_ab8505(di->parent)) {
/* Write 0 to the curr bits */
ret = abx500_mask_and_set_register_interruptible(
di->dev,
@@ -314,7 +330,13 @@ static int ab8500_btemp_curr_source_enable(struct ab8500_btemp *di,
* if we got an error above
*/
disable_curr_source:
- if (is_ab9540(di->parent) || is_ab8505(di->parent)) {
+ if (is_ab8540(di->parent)) {
+ /* Write 0 to the curr bits */
+ ret = abx500_mask_and_set_register_interruptible(di->dev,
+ AB8500_CHARGER, AB8500_BAT_CTRL_CURRENT_SOURCE,
+ BAT_CTRL_60U_ENA | BAT_CTRL_120U_ENA,
+ ~(BAT_CTRL_60U_ENA | BAT_CTRL_120U_ENA));
+ } else if (is_ab9540(di->parent) || is_ab8505(di->parent)) {
/* Write 0 to the curr bits */
ret = abx500_mask_and_set_register_interruptible(di->dev,
AB8500_CHARGER, AB8500_BAT_CTRL_CURRENT_SOURCE,
@@ -541,7 +563,9 @@ static int ab8500_btemp_id(struct ab8500_btemp *di)
{
int res;
u8 i;
- if (is_ab9540(di->parent) || is_ab8505(di->parent))
+ if (is_ab8540(di->parent))
+ di->curr_source = BTEMP_BATCTRL_CURR_SRC_60UA;
+ else if (is_ab9540(di->parent) || is_ab8505(di->parent))
di->curr_source = BTEMP_BATCTRL_CURR_SRC_16UA;
else
di->curr_source = BTEMP_BATCTRL_CURR_SRC_7UA;
@@ -579,12 +603,17 @@ static int ab8500_btemp_id(struct ab8500_btemp *di)
/*
* We only have to change current source if the
- * detected type is Type 1, else we use the 7uA source
+ * detected type is Type 1.
*/
if (di->bm->adc_therm == ABx500_ADC_THERM_BATCTRL &&
- di->bm->batt_id == 1) {
- if (is_ab9540(di->parent) || is_ab8505(di->parent)) {
- dev_dbg(di->dev, "Set BATCTRL current source to 16uA\n");
+ di->bm->batt_id == 1) {
+ if (is_ab8540(di->parent)) {
+ dev_dbg(di->dev,
+ "Set BATCTRL current source to 60uA\n");
+ di->curr_source = BTEMP_BATCTRL_CURR_SRC_60UA;
+ } else if (is_ab9540(di->parent) || is_ab8505(di->parent)) {
+ dev_dbg(di->dev,
+ "Set BATCTRL current source to 16uA\n");
di->curr_source = BTEMP_BATCTRL_CURR_SRC_16UA;
} else {
dev_dbg(di->dev, "Set BATCTRL current source to 20uA\n");
@@ -604,22 +633,37 @@ static int ab8500_btemp_id(struct ab8500_btemp *di)
static void ab8500_btemp_periodic_work(struct work_struct *work)
{
int interval;
+ int bat_temp;
struct ab8500_btemp *di = container_of(work,
struct ab8500_btemp, btemp_periodic_work.work);
if (!di->initialized) {
- di->initialized = true;
/* Identify the battery */
if (ab8500_btemp_id(di) < 0)
dev_warn(di->dev, "failed to identify the battery\n");
}
- di->bat_temp = ab8500_btemp_measure_temp(di);
-
- if (di->bat_temp != di->prev_bat_temp) {
- di->prev_bat_temp = di->bat_temp;
+ bat_temp = ab8500_btemp_measure_temp(di);
+ /*
+ * Filter battery temperature.
+ * Allow direct updates on temperature only if two samples result in
+ * same temperature. Else only allow 1 degree change from previous
+ * reported value in the direction of the new measurement.
+ */
+ if ((bat_temp == di->prev_bat_temp) || !di->initialized) {
+ if ((di->bat_temp != di->prev_bat_temp) || !di->initialized) {
+ di->initialized = true;
+ di->bat_temp = bat_temp;
+ power_supply_changed(&di->btemp_psy);
+ }
+ } else if (bat_temp < di->prev_bat_temp) {
+ di->bat_temp--;
+ power_supply_changed(&di->btemp_psy);
+ } else if (bat_temp > di->prev_bat_temp) {
+ di->bat_temp++;
power_supply_changed(&di->btemp_psy);
}
+ di->prev_bat_temp = bat_temp;
if (di->events.ac_conn || di->events.usb_conn)
interval = di->bm->temp_interval_chg;
@@ -772,7 +816,7 @@ static void ab8500_btemp_periodic(struct ab8500_btemp *di,
*
* Returns battery temperature
*/
-static int ab8500_btemp_get_temp(struct ab8500_btemp *di)
+int ab8500_btemp_get_temp(struct ab8500_btemp *di)
{
int temp = 0;
@@ -808,6 +852,7 @@ static int ab8500_btemp_get_temp(struct ab8500_btemp *di)
}
return temp;
}
+EXPORT_SYMBOL(ab8500_btemp_get_temp);
/**
* ab8500_btemp_get_batctrl_temp() - get the temperature
@@ -819,6 +864,7 @@ int ab8500_btemp_get_batctrl_temp(struct ab8500_btemp *btemp)
{
return btemp->bat_temp * 1000;
}
+EXPORT_SYMBOL(ab8500_btemp_get_batctrl_temp);
/**
* ab8500_btemp_get_property() - get the btemp properties
diff --git a/drivers/power/ab8500_charger.c b/drivers/power/ab8500_charger.c
index 24b30b7ea5ca..a558318b169c 100644
--- a/drivers/power/ab8500_charger.c
+++ b/drivers/power/ab8500_charger.c
@@ -15,6 +15,7 @@
#include <linux/device.h>
#include <linux/interrupt.h>
#include <linux/delay.h>
+#include <linux/notifier.h>
#include <linux/slab.h>
#include <linux/platform_device.h>
#include <linux/power_supply.h>
@@ -52,10 +53,15 @@
#define VBUS_DET_DBNC100 0x02
#define VBUS_DET_DBNC1 0x01
#define OTP_ENABLE_WD 0x01
+#define DROP_COUNT_RESET 0x01
+#define USB_CH_DET 0x01
#define MAIN_CH_INPUT_CURR_SHIFT 4
#define VBUS_IN_CURR_LIM_SHIFT 4
+#define AB8540_VBUS_IN_CURR_LIM_SHIFT 2
#define AUTO_VBUS_IN_CURR_LIM_SHIFT 4
+#define AB8540_AUTO_VBUS_IN_CURR_MASK 0x3F
+#define VBUS_IN_CURR_LIM_RETRY_SET_TIME 30 /* seconds */
#define LED_INDICATOR_PWM_ENA 0x01
#define LED_INDICATOR_PWM_DIS 0x00
@@ -77,7 +83,9 @@
/* UsbLineStatus register bit masks */
#define AB8500_USB_LINK_STATUS 0x78
+#define AB8505_USB_LINK_STATUS 0xF8
#define AB8500_STD_HOST_SUSP 0x18
+#define USB_LINK_STATUS_SHIFT 3
/* Watchdog timeout constant */
#define WD_TIMER 0x30 /* 4min */
@@ -96,6 +104,10 @@
#define AB8500_SW_CONTROL_FALLBACK 0x03
/* Wait for enumeration before charing in us */
#define WAIT_ACA_RID_ENUMERATION (5 * 1000)
+/*External charger control*/
+#define AB8500_SYS_CHARGER_CONTROL_REG 0x52
+#define EXTERNAL_CHARGER_DISABLE_REG_VAL 0x03
+#define EXTERNAL_CHARGER_ENABLE_REG_VAL 0x07
/* UsbLineStatus register - usb types */
enum ab8500_charger_link_status {
@@ -196,10 +208,15 @@ struct ab8500_charger_usb_state {
spinlock_t usb_lock;
};
+struct ab8500_charger_max_usb_in_curr {
+ int usb_type_max;
+ int set_max;
+ int calculated_max;
+};
+
/**
* struct ab8500_charger - ab8500 Charger device information
* @dev: Pointer to the structure device
- * @max_usb_in_curr: Max USB charger input current
* @vbus_detected: VBUS detected
* @vbus_detected_start:
* VBUS detected during startup
@@ -214,7 +231,6 @@ struct ab8500_charger_usb_state {
* @autopower Indicate if we should have automatic pwron after pwrloss
* @autopower_cfg platform specific power config support for "pwron after pwrloss"
* @invalid_charger_detect_state State when forcing AB to use invalid charger
- * @is_usb_host: Indicate if last detected USB type is host
* @is_aca_rid: Incicate if accessory is ACA type
* @current_stepping_sessions:
* Counter for current stepping sessions
@@ -223,6 +239,7 @@ struct ab8500_charger_usb_state {
* @bm: Platform specific battery management information
* @flags: Structure for information about events triggered
* @usb_state: Structure for usb stack information
+ * @max_usb_in_curr: Max USB charger input current
* @ac_chg: AC charger power supply
* @usb_chg: USB charger power supply
* @ac: Structure that holds the AC charger properties
@@ -254,7 +271,6 @@ struct ab8500_charger_usb_state {
*/
struct ab8500_charger {
struct device *dev;
- int max_usb_in_curr;
bool vbus_detected;
bool vbus_detected_start;
bool ac_conn;
@@ -266,7 +282,6 @@ struct ab8500_charger {
bool autopower;
bool autopower_cfg;
int invalid_charger_detect_state;
- bool is_usb_host;
int is_aca_rid;
atomic_t current_stepping_sessions;
struct ab8500 *parent;
@@ -274,6 +289,7 @@ struct ab8500_charger {
struct abx500_bm_data *bm;
struct ab8500_charger_event_flags flags;
struct ab8500_charger_usb_state usb_state;
+ struct ab8500_charger_max_usb_in_curr max_usb_in_curr;
struct ux500_charger ac_chg;
struct ux500_charger usb_chg;
struct ab8500_charger_info ac;
@@ -415,13 +431,18 @@ static void ab8500_charger_set_usb_connected(struct ab8500_charger *di,
if (connected != di->usb.charger_connected) {
dev_dbg(di->dev, "USB connected:%i\n", connected);
di->usb.charger_connected = connected;
+
+ if (!connected)
+ di->flags.vbus_drop_end = false;
+
sysfs_notify(&di->usb_chg.psy.dev->kobj, NULL, "present");
if (connected) {
mutex_lock(&di->charger_attached_mutex);
mutex_unlock(&di->charger_attached_mutex);
- queue_delayed_work(di->charger_wq,
+ if (is_ab8500(di->parent))
+ queue_delayed_work(di->charger_wq,
&di->usb_charger_attached_work,
HZ);
} else {
@@ -668,23 +689,19 @@ static int ab8500_charger_max_usb_curr(struct ab8500_charger *di,
case USB_STAT_STD_HOST_C_S:
dev_dbg(di->dev, "USB Type - Standard host is "
"detected through USB driver\n");
- di->max_usb_in_curr = USB_CH_IP_CUR_LVL_0P5;
- di->is_usb_host = true;
+ di->max_usb_in_curr.usb_type_max = USB_CH_IP_CUR_LVL_0P5;
di->is_aca_rid = 0;
break;
case USB_STAT_HOST_CHG_HS_CHIRP:
- di->max_usb_in_curr = USB_CH_IP_CUR_LVL_0P5;
- di->is_usb_host = true;
+ di->max_usb_in_curr.usb_type_max = USB_CH_IP_CUR_LVL_0P5;
di->is_aca_rid = 0;
break;
case USB_STAT_HOST_CHG_HS:
- di->max_usb_in_curr = USB_CH_IP_CUR_LVL_0P5;
- di->is_usb_host = true;
+ di->max_usb_in_curr.usb_type_max = USB_CH_IP_CUR_LVL_0P5;
di->is_aca_rid = 0;
break;
case USB_STAT_ACA_RID_C_HS:
- di->max_usb_in_curr = USB_CH_IP_CUR_LVL_0P9;
- di->is_usb_host = false;
+ di->max_usb_in_curr.usb_type_max = USB_CH_IP_CUR_LVL_0P9;
di->is_aca_rid = 0;
break;
case USB_STAT_ACA_RID_A:
@@ -693,8 +710,7 @@ static int ab8500_charger_max_usb_curr(struct ab8500_charger *di,
* can consume (900mA). Closest level is 500mA
*/
dev_dbg(di->dev, "USB_STAT_ACA_RID_A detected\n");
- di->max_usb_in_curr = USB_CH_IP_CUR_LVL_0P5;
- di->is_usb_host = false;
+ di->max_usb_in_curr.usb_type_max = USB_CH_IP_CUR_LVL_0P5;
di->is_aca_rid = 1;
break;
case USB_STAT_ACA_RID_B:
@@ -702,38 +718,35 @@ static int ab8500_charger_max_usb_curr(struct ab8500_charger *di,
* Dedicated charger level minus 120mA (20mA for ACA and
* 100mA for potential accessory). Closest level is 1300mA
*/
- di->max_usb_in_curr = USB_CH_IP_CUR_LVL_1P3;
+ di->max_usb_in_curr.usb_type_max = USB_CH_IP_CUR_LVL_1P3;
dev_dbg(di->dev, "USB Type - 0x%02x MaxCurr: %d", link_status,
- di->max_usb_in_curr);
- di->is_usb_host = false;
+ di->max_usb_in_curr.usb_type_max);
di->is_aca_rid = 1;
break;
case USB_STAT_HOST_CHG_NM:
- di->max_usb_in_curr = USB_CH_IP_CUR_LVL_0P5;
- di->is_usb_host = true;
+ di->max_usb_in_curr.usb_type_max = USB_CH_IP_CUR_LVL_0P5;
di->is_aca_rid = 0;
break;
case USB_STAT_DEDICATED_CHG:
- di->max_usb_in_curr = USB_CH_IP_CUR_LVL_1P5;
- di->is_usb_host = false;
+ di->max_usb_in_curr.usb_type_max = USB_CH_IP_CUR_LVL_1P5;
di->is_aca_rid = 0;
break;
case USB_STAT_ACA_RID_C_HS_CHIRP:
case USB_STAT_ACA_RID_C_NM:
- di->max_usb_in_curr = USB_CH_IP_CUR_LVL_1P5;
- di->is_usb_host = false;
+ di->max_usb_in_curr.usb_type_max = USB_CH_IP_CUR_LVL_1P5;
di->is_aca_rid = 1;
break;
case USB_STAT_NOT_CONFIGURED:
if (di->vbus_detected) {
di->usb_device_is_unrecognised = true;
dev_dbg(di->dev, "USB Type - Legacy charger.\n");
- di->max_usb_in_curr = USB_CH_IP_CUR_LVL_1P5;
+ di->max_usb_in_curr.usb_type_max =
+ USB_CH_IP_CUR_LVL_1P5;
break;
}
case USB_STAT_HM_IDGND:
dev_err(di->dev, "USB Type - Charging not allowed\n");
- di->max_usb_in_curr = USB_CH_IP_CUR_LVL_0P05;
+ di->max_usb_in_curr.usb_type_max = USB_CH_IP_CUR_LVL_0P05;
ret = -ENXIO;
break;
case USB_STAT_RESERVED:
@@ -743,12 +756,13 @@ static int ab8500_charger_max_usb_curr(struct ab8500_charger *di,
"VBUS has collapsed\n");
ret = -ENXIO;
break;
- }
- if (is_ab9540(di->parent) || is_ab8505(di->parent)) {
+ } else {
dev_dbg(di->dev, "USB Type - Charging not allowed\n");
- di->max_usb_in_curr = USB_CH_IP_CUR_LVL_0P05;
+ di->max_usb_in_curr.usb_type_max =
+ USB_CH_IP_CUR_LVL_0P05;
dev_dbg(di->dev, "USB Type - 0x%02x MaxCurr: %d",
- link_status, di->max_usb_in_curr);
+ link_status,
+ di->max_usb_in_curr.usb_type_max);
ret = -ENXIO;
break;
}
@@ -757,23 +771,24 @@ static int ab8500_charger_max_usb_curr(struct ab8500_charger *di,
case USB_STAT_CARKIT_2:
case USB_STAT_ACA_DOCK_CHARGER:
case USB_STAT_CHARGER_LINE_1:
- di->max_usb_in_curr = USB_CH_IP_CUR_LVL_0P5;
+ di->max_usb_in_curr.usb_type_max = USB_CH_IP_CUR_LVL_0P5;
dev_dbg(di->dev, "USB Type - 0x%02x MaxCurr: %d", link_status,
- di->max_usb_in_curr);
+ di->max_usb_in_curr.usb_type_max);
case USB_STAT_NOT_VALID_LINK:
dev_err(di->dev, "USB Type invalid - try charging anyway\n");
- di->max_usb_in_curr = USB_CH_IP_CUR_LVL_0P5;
+ di->max_usb_in_curr.usb_type_max = USB_CH_IP_CUR_LVL_0P5;
break;
default:
dev_err(di->dev, "USB Type - Unknown\n");
- di->max_usb_in_curr = USB_CH_IP_CUR_LVL_0P05;
+ di->max_usb_in_curr.usb_type_max = USB_CH_IP_CUR_LVL_0P05;
ret = -ENXIO;
break;
};
+ di->max_usb_in_curr.set_max = di->max_usb_in_curr.usb_type_max;
dev_dbg(di->dev, "USB Type - 0x%02x MaxCurr: %d",
- link_status, di->max_usb_in_curr);
+ link_status, di->max_usb_in_curr.set_max);
return ret;
}
@@ -796,21 +811,22 @@ static int ab8500_charger_read_usb_type(struct ab8500_charger *di)
dev_err(di->dev, "%s ab8500 read failed\n", __func__);
return ret;
}
- if (is_ab8500(di->parent)) {
+ if (is_ab8500(di->parent))
ret = abx500_get_register_interruptible(di->dev, AB8500_USB,
- AB8500_USB_LINE_STAT_REG, &val);
- } else {
- if (is_ab9540(di->parent) || is_ab8505(di->parent))
- ret = abx500_get_register_interruptible(di->dev,
- AB8500_USB, AB8500_USB_LINK1_STAT_REG, &val);
- }
+ AB8500_USB_LINE_STAT_REG, &val);
+ else
+ ret = abx500_get_register_interruptible(di->dev,
+ AB8500_USB, AB8500_USB_LINK1_STAT_REG, &val);
if (ret < 0) {
dev_err(di->dev, "%s ab8500 read failed\n", __func__);
return ret;
}
/* get the USB type */
- val = (val & AB8500_USB_LINK_STATUS) >> 3;
+ if (is_ab8500(di->parent))
+ val = (val & AB8500_USB_LINK_STATUS) >> USB_LINK_STATUS_SHIFT;
+ else
+ val = (val & AB8505_USB_LINK_STATUS) >> USB_LINK_STATUS_SHIFT;
ret = ab8500_charger_max_usb_curr(di,
(enum ab8500_charger_link_status) val);
@@ -865,7 +881,12 @@ static int ab8500_charger_detect_usb_type(struct ab8500_charger *di)
*/
/* get the USB type */
- val = (val & AB8500_USB_LINK_STATUS) >> 3;
+ if (is_ab8500(di->parent))
+ val = (val & AB8500_USB_LINK_STATUS) >>
+ USB_LINK_STATUS_SHIFT;
+ else
+ val = (val & AB8505_USB_LINK_STATUS) >>
+ USB_LINK_STATUS_SHIFT;
if (val)
break;
}
@@ -960,51 +981,6 @@ static int ab8500_charger_voltage_map[] = {
4600 ,
};
-/*
- * This array maps the raw hex value to charger current used by the AB8500
- * Values taken from the UM0836
- */
-static int ab8500_charger_current_map[] = {
- 100 ,
- 200 ,
- 300 ,
- 400 ,
- 500 ,
- 600 ,
- 700 ,
- 800 ,
- 900 ,
- 1000 ,
- 1100 ,
- 1200 ,
- 1300 ,
- 1400 ,
- 1500 ,
-};
-
-/*
- * This array maps the raw hex value to VBUS input current used by the AB8500
- * Values taken from the UM0836
- */
-static int ab8500_charger_vbus_in_curr_map[] = {
- USB_CH_IP_CUR_LVL_0P05,
- USB_CH_IP_CUR_LVL_0P09,
- USB_CH_IP_CUR_LVL_0P19,
- USB_CH_IP_CUR_LVL_0P29,
- USB_CH_IP_CUR_LVL_0P38,
- USB_CH_IP_CUR_LVL_0P45,
- USB_CH_IP_CUR_LVL_0P5,
- USB_CH_IP_CUR_LVL_0P6,
- USB_CH_IP_CUR_LVL_0P7,
- USB_CH_IP_CUR_LVL_0P8,
- USB_CH_IP_CUR_LVL_0P9,
- USB_CH_IP_CUR_LVL_1P0,
- USB_CH_IP_CUR_LVL_1P1,
- USB_CH_IP_CUR_LVL_1P3,
- USB_CH_IP_CUR_LVL_1P4,
- USB_CH_IP_CUR_LVL_1P5,
-};
-
static int ab8500_voltage_to_regval(int voltage)
{
int i;
@@ -1026,41 +1002,41 @@ static int ab8500_voltage_to_regval(int voltage)
return -1;
}
-static int ab8500_current_to_regval(int curr)
+static int ab8500_current_to_regval(struct ab8500_charger *di, int curr)
{
int i;
- if (curr < ab8500_charger_current_map[0])
+ if (curr < di->bm->chg_output_curr[0])
return 0;
- for (i = 0; i < ARRAY_SIZE(ab8500_charger_current_map); i++) {
- if (curr < ab8500_charger_current_map[i])
+ for (i = 0; i < di->bm->n_chg_out_curr; i++) {
+ if (curr < di->bm->chg_output_curr[i])
return i - 1;
}
/* If not last element, return error */
- i = ARRAY_SIZE(ab8500_charger_current_map) - 1;
- if (curr == ab8500_charger_current_map[i])
+ i = di->bm->n_chg_out_curr - 1;
+ if (curr == di->bm->chg_output_curr[i])
return i;
else
return -1;
}
-static int ab8500_vbus_in_curr_to_regval(int curr)
+static int ab8500_vbus_in_curr_to_regval(struct ab8500_charger *di, int curr)
{
int i;
- if (curr < ab8500_charger_vbus_in_curr_map[0])
+ if (curr < di->bm->chg_input_curr[0])
return 0;
- for (i = 0; i < ARRAY_SIZE(ab8500_charger_vbus_in_curr_map); i++) {
- if (curr < ab8500_charger_vbus_in_curr_map[i])
+ for (i = 0; i < di->bm->n_chg_in_curr; i++) {
+ if (curr < di->bm->chg_input_curr[i])
return i - 1;
}
/* If not last element, return error */
- i = ARRAY_SIZE(ab8500_charger_vbus_in_curr_map) - 1;
- if (curr == ab8500_charger_vbus_in_curr_map[i])
+ i = di->bm->n_chg_in_curr - 1;
+ if (curr == di->bm->chg_input_curr[i])
return i;
else
return -1;
@@ -1077,28 +1053,48 @@ static int ab8500_vbus_in_curr_to_regval(int curr)
*/
static int ab8500_charger_get_usb_cur(struct ab8500_charger *di)
{
+ int ret = 0;
switch (di->usb_state.usb_current) {
case 100:
- di->max_usb_in_curr = USB_CH_IP_CUR_LVL_0P09;
+ di->max_usb_in_curr.usb_type_max = USB_CH_IP_CUR_LVL_0P09;
break;
case 200:
- di->max_usb_in_curr = USB_CH_IP_CUR_LVL_0P19;
+ di->max_usb_in_curr.usb_type_max = USB_CH_IP_CUR_LVL_0P19;
break;
case 300:
- di->max_usb_in_curr = USB_CH_IP_CUR_LVL_0P29;
+ di->max_usb_in_curr.usb_type_max = USB_CH_IP_CUR_LVL_0P29;
break;
case 400:
- di->max_usb_in_curr = USB_CH_IP_CUR_LVL_0P38;
+ di->max_usb_in_curr.usb_type_max = USB_CH_IP_CUR_LVL_0P38;
break;
case 500:
- di->max_usb_in_curr = USB_CH_IP_CUR_LVL_0P5;
+ di->max_usb_in_curr.usb_type_max = USB_CH_IP_CUR_LVL_0P5;
break;
default:
- di->max_usb_in_curr = USB_CH_IP_CUR_LVL_0P05;
- return -1;
+ di->max_usb_in_curr.usb_type_max = USB_CH_IP_CUR_LVL_0P05;
+ ret = -EPERM;
break;
};
- return 0;
+ di->max_usb_in_curr.set_max = di->max_usb_in_curr.usb_type_max;
+ return ret;
+}
+
+/**
+ * ab8500_charger_check_continue_stepping() - Check to allow stepping
+ * @di: pointer to the ab8500_charger structure
+ * @reg: select what charger register to check
+ *
+ * Check if current stepping should be allowed to continue.
+ * Checks if charger source has not collapsed. If it has, further stepping
+ * is not allowed.
+ */
+static bool ab8500_charger_check_continue_stepping(struct ab8500_charger *di,
+ int reg)
+{
+ if (reg == AB8500_USBCH_IPT_CRNTLVL_REG)
+ return !di->flags.vbus_drop_end;
+ else
+ return true;
}
/**
@@ -1118,7 +1114,7 @@ static int ab8500_charger_set_current(struct ab8500_charger *di,
int ich, int reg)
{
int ret = 0;
- int auto_curr_index, curr_index, prev_curr_index, shift_value, i;
+ int curr_index, prev_curr_index, shift_value, i;
u8 reg_value;
u32 step_udelay;
bool no_stepping = false;
@@ -1136,39 +1132,27 @@ static int ab8500_charger_set_current(struct ab8500_charger *di,
case AB8500_MCH_IPT_CURLVL_REG:
shift_value = MAIN_CH_INPUT_CURR_SHIFT;
prev_curr_index = (reg_value >> shift_value);
- curr_index = ab8500_current_to_regval(ich);
+ curr_index = ab8500_current_to_regval(di, ich);
step_udelay = STEP_UDELAY;
if (!di->ac.charger_connected)
no_stepping = true;
break;
case AB8500_USBCH_IPT_CRNTLVL_REG:
- shift_value = VBUS_IN_CURR_LIM_SHIFT;
+ if (is_ab8540(di->parent))
+ shift_value = AB8540_VBUS_IN_CURR_LIM_SHIFT;
+ else
+ shift_value = VBUS_IN_CURR_LIM_SHIFT;
prev_curr_index = (reg_value >> shift_value);
- curr_index = ab8500_vbus_in_curr_to_regval(ich);
+ curr_index = ab8500_vbus_in_curr_to_regval(di, ich);
step_udelay = STEP_UDELAY * 100;
- ret = abx500_get_register_interruptible(di->dev, AB8500_CHARGER,
- AB8500_CH_USBCH_STAT2_REG, &reg_value);
- if (ret < 0) {
- dev_err(di->dev, "%s read failed\n", __func__);
- goto exit_set_current;
- }
- auto_curr_index =
- reg_value >> AUTO_VBUS_IN_CURR_LIM_SHIFT;
-
- dev_dbg(di->dev, "%s Auto VBUS curr is %d mA\n",
- __func__,
- ab8500_charger_vbus_in_curr_map[auto_curr_index]);
-
- prev_curr_index = min(prev_curr_index, auto_curr_index);
-
if (!di->usb.charger_connected)
no_stepping = true;
break;
case AB8500_CH_OPT_CRNTLVL_REG:
shift_value = 0;
prev_curr_index = (reg_value >> shift_value);
- curr_index = ab8500_current_to_regval(ich);
+ curr_index = ab8500_current_to_regval(di, ich);
step_udelay = STEP_UDELAY;
if (curr_index && (curr_index - prev_curr_index) > 1)
step_udelay *= 100;
@@ -1219,7 +1203,8 @@ static int ab8500_charger_set_current(struct ab8500_charger *di,
usleep_range(step_udelay, step_udelay * 2);
}
} else {
- for (i = prev_curr_index + 1; i <= curr_index; i++) {
+ bool allow = true;
+ for (i = prev_curr_index + 1; i <= curr_index && allow; i++) {
dev_dbg(di->dev, "curr change_2 to: %x for 0x%02x\n",
(u8)i << shift_value, reg);
ret = abx500_set_register_interruptible(di->dev,
@@ -1230,6 +1215,8 @@ static int ab8500_charger_set_current(struct ab8500_charger *di,
}
if (i != curr_index)
usleep_range(step_udelay, step_udelay * 2);
+
+ allow = ab8500_charger_check_continue_stepping(di, reg);
}
}
@@ -1255,6 +1242,11 @@ static int ab8500_charger_set_vbus_in_curr(struct ab8500_charger *di,
/* We should always use to lowest current limit */
min_value = min(di->bm->chg_params->usb_curr_max, ich_in);
+ if (di->max_usb_in_curr.set_max > 0)
+ min_value = min(di->max_usb_in_curr.set_max, min_value);
+
+ if (di->usb_state.usb_current >= 0)
+ min_value = min(di->usb_state.usb_current, min_value);
switch (min_value) {
case 100:
@@ -1400,8 +1392,8 @@ static int ab8500_charger_ac_en(struct ux500_charger *charger,
/* Check if the requested voltage or current is valid */
volt_index = ab8500_voltage_to_regval(vset);
- curr_index = ab8500_current_to_regval(iset);
- input_curr_index = ab8500_current_to_regval(
+ curr_index = ab8500_current_to_regval(di, iset);
+ input_curr_index = ab8500_current_to_regval(di,
di->bm->chg_params->ac_curr_max);
if (volt_index < 0 || curr_index < 0 || input_curr_index < 0) {
dev_err(di->dev,
@@ -1572,7 +1564,7 @@ static int ab8500_charger_usb_en(struct ux500_charger *charger,
/* Check if the requested voltage or current is valid */
volt_index = ab8500_voltage_to_regval(vset);
- curr_index = ab8500_current_to_regval(ich_out);
+ curr_index = ab8500_current_to_regval(di, ich_out);
if (volt_index < 0 || curr_index < 0) {
dev_err(di->dev,
"Charger voltage or current too high, "
@@ -1609,7 +1601,8 @@ static int ab8500_charger_usb_en(struct ux500_charger *charger,
di->usb.charger_online = 1;
/* USBChInputCurr: current that can be drawn from the usb */
- ret = ab8500_charger_set_vbus_in_curr(di, di->max_usb_in_curr);
+ ret = ab8500_charger_set_vbus_in_curr(di,
+ di->max_usb_in_curr.usb_type_max);
if (ret) {
dev_err(di->dev, "setting USBChInputCurr failed\n");
return ret;
@@ -1668,8 +1661,7 @@ static int ab8500_charger_usb_en(struct ux500_charger *charger,
dev_dbg(di->dev, "%s Disabled USB charging\n", __func__);
/* Cancel any pending Vbat check work */
- if (delayed_work_pending(&di->check_vbat_work))
- cancel_delayed_work(&di->check_vbat_work);
+ cancel_delayed_work(&di->check_vbat_work);
}
ab8500_power_supply_changed(di, &di->usb_chg.psy);
@@ -1677,6 +1669,128 @@ static int ab8500_charger_usb_en(struct ux500_charger *charger,
return ret;
}
+static int ab8500_external_charger_prepare(struct notifier_block *charger_nb,
+ unsigned long event, void *data)
+{
+ int ret;
+ struct device *dev = data;
+ /*Toggle External charger control pin*/
+ ret = abx500_set_register_interruptible(dev, AB8500_SYS_CTRL1_BLOCK,
+ AB8500_SYS_CHARGER_CONTROL_REG,
+ EXTERNAL_CHARGER_DISABLE_REG_VAL);
+ if (ret < 0) {
+ dev_err(dev, "write reg failed %d\n", ret);
+ goto out;
+ }
+ ret = abx500_set_register_interruptible(dev, AB8500_SYS_CTRL1_BLOCK,
+ AB8500_SYS_CHARGER_CONTROL_REG,
+ EXTERNAL_CHARGER_ENABLE_REG_VAL);
+ if (ret < 0)
+ dev_err(dev, "Write reg failed %d\n", ret);
+
+out:
+ return ret;
+}
+
+/**
+ * ab8500_charger_usb_check_enable() - enable usb charging
+ * @charger: pointer to the ux500_charger structure
+ * @vset: charging voltage
+ * @iset: charger output current
+ *
+ * Check if the VBUS charger has been disconnected and reconnected without
+ * AB8500 rising an interrupt. Returns 0 on success.
+ */
+static int ab8500_charger_usb_check_enable(struct ux500_charger *charger,
+ int vset, int iset)
+{
+ u8 usbch_ctrl1 = 0;
+ int ret = 0;
+
+ struct ab8500_charger *di = to_ab8500_charger_usb_device_info(charger);
+
+ if (!di->usb.charger_connected)
+ return ret;
+
+ ret = abx500_get_register_interruptible(di->dev, AB8500_CHARGER,
+ AB8500_USBCH_CTRL1_REG, &usbch_ctrl1);
+ if (ret < 0) {
+ dev_err(di->dev, "ab8500 read failed %d\n", __LINE__);
+ return ret;
+ }
+ dev_dbg(di->dev, "USB charger ctrl: 0x%02x\n", usbch_ctrl1);
+
+ if (!(usbch_ctrl1 & USB_CH_ENA)) {
+ dev_info(di->dev, "Charging has been disabled abnormally and will be re-enabled\n");
+
+ ret = abx500_mask_and_set_register_interruptible(di->dev,
+ AB8500_CHARGER, AB8500_CHARGER_CTRL,
+ DROP_COUNT_RESET, DROP_COUNT_RESET);
+ if (ret < 0) {
+ dev_err(di->dev, "ab8500 write failed %d\n", __LINE__);
+ return ret;
+ }
+
+ ret = ab8500_charger_usb_en(&di->usb_chg, true, vset, iset);
+ if (ret < 0) {
+ dev_err(di->dev, "Failed to enable VBUS charger %d\n",
+ __LINE__);
+ return ret;
+ }
+ }
+ return ret;
+}
+
+/**
+ * ab8500_charger_ac_check_enable() - enable usb charging
+ * @charger: pointer to the ux500_charger structure
+ * @vset: charging voltage
+ * @iset: charger output current
+ *
+ * Check if the AC charger has been disconnected and reconnected without
+ * AB8500 rising an interrupt. Returns 0 on success.
+ */
+static int ab8500_charger_ac_check_enable(struct ux500_charger *charger,
+ int vset, int iset)
+{
+ u8 mainch_ctrl1 = 0;
+ int ret = 0;
+
+ struct ab8500_charger *di = to_ab8500_charger_ac_device_info(charger);
+
+ if (!di->ac.charger_connected)
+ return ret;
+
+ ret = abx500_get_register_interruptible(di->dev, AB8500_CHARGER,
+ AB8500_MCH_CTRL1, &mainch_ctrl1);
+ if (ret < 0) {
+ dev_err(di->dev, "ab8500 read failed %d\n", __LINE__);
+ return ret;
+ }
+ dev_dbg(di->dev, "AC charger ctrl: 0x%02x\n", mainch_ctrl1);
+
+ if (!(mainch_ctrl1 & MAIN_CH_ENA)) {
+ dev_info(di->dev, "Charging has been disabled abnormally and will be re-enabled\n");
+
+ ret = abx500_mask_and_set_register_interruptible(di->dev,
+ AB8500_CHARGER, AB8500_CHARGER_CTRL,
+ DROP_COUNT_RESET, DROP_COUNT_RESET);
+
+ if (ret < 0) {
+ dev_err(di->dev, "ab8500 write failed %d\n", __LINE__);
+ return ret;
+ }
+
+ ret = ab8500_charger_ac_en(&di->usb_chg, true, vset, iset);
+ if (ret < 0) {
+ dev_err(di->dev, "failed to enable AC charger %d\n",
+ __LINE__);
+ return ret;
+ }
+ }
+ return ret;
+}
+
/**
* ab8500_charger_watchdog_kick() - kick charger watchdog
* @di: pointer to the ab8500_charger structure
@@ -1734,8 +1848,68 @@ static int ab8500_charger_update_charger_current(struct ux500_charger *charger,
/* Reset the main and usb drop input current measurement counter */
ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER,
- AB8500_CHARGER_CTRL,
- 0x1);
+ AB8500_CHARGER_CTRL, DROP_COUNT_RESET);
+ if (ret) {
+ dev_err(di->dev, "%s write failed\n", __func__);
+ return ret;
+ }
+
+ return ret;
+}
+
+/**
+ * ab8540_charger_power_path_enable() - enable usb power path mode
+ * @charger: pointer to the ux500_charger structure
+ * @enable: enable/disable flag
+ *
+ * Enable or disable the power path for usb mode
+ * Returns error code in case of failure else 0(on success)
+ */
+static int ab8540_charger_power_path_enable(struct ux500_charger *charger,
+ bool enable)
+{
+ int ret;
+ struct ab8500_charger *di;
+
+ if (charger->psy.type == POWER_SUPPLY_TYPE_USB)
+ di = to_ab8500_charger_usb_device_info(charger);
+ else
+ return -ENXIO;
+
+ ret = abx500_mask_and_set_register_interruptible(di->dev,
+ AB8500_CHARGER, AB8540_USB_PP_MODE_REG,
+ BUS_POWER_PATH_MODE_ENA, enable);
+ if (ret) {
+ dev_err(di->dev, "%s write failed\n", __func__);
+ return ret;
+ }
+
+ return ret;
+}
+
+
+/**
+ * ab8540_charger_usb_pre_chg_enable() - enable usb pre change
+ * @charger: pointer to the ux500_charger structure
+ * @enable: enable/disable flag
+ *
+ * Enable or disable the pre-chage for usb mode
+ * Returns error code in case of failure else 0(on success)
+ */
+static int ab8540_charger_usb_pre_chg_enable(struct ux500_charger *charger,
+ bool enable)
+{
+ int ret;
+ struct ab8500_charger *di;
+
+ if (charger->psy.type == POWER_SUPPLY_TYPE_USB)
+ di = to_ab8500_charger_usb_device_info(charger);
+ else
+ return -ENXIO;
+
+ ret = abx500_mask_and_set_register_interruptible(di->dev,
+ AB8500_CHARGER, AB8540_USB_PP_CHR_REG,
+ BUS_POWER_PATH_PRECHG_ENA, enable);
if (ret) {
dev_err(di->dev, "%s write failed\n", __func__);
return ret;
@@ -1823,9 +1997,10 @@ static void ab8500_charger_check_vbat_work(struct work_struct *work)
di->vbat > VBAT_TRESH_IP_CUR_RED))) {
dev_dbg(di->dev, "Vbat did cross threshold, curr: %d, new: %d,"
- " old: %d\n", di->max_usb_in_curr, di->vbat,
- di->old_vbat);
- ab8500_charger_set_vbus_in_curr(di, di->max_usb_in_curr);
+ " old: %d\n", di->max_usb_in_curr.usb_type_max,
+ di->vbat, di->old_vbat);
+ ab8500_charger_set_vbus_in_curr(di,
+ di->max_usb_in_curr.usb_type_max);
power_supply_changed(&di->usb_chg.psy);
}
@@ -2105,7 +2280,8 @@ static void ab8500_charger_usb_link_attach_work(struct work_struct *work)
/* Update maximum input current if USB enumeration is not detected */
if (!di->usb.charger_online) {
- ret = ab8500_charger_set_vbus_in_curr(di, di->max_usb_in_curr);
+ ret = ab8500_charger_set_vbus_in_curr(di,
+ di->max_usb_in_curr.usb_type_max);
if (ret)
return;
}
@@ -2125,6 +2301,7 @@ static void ab8500_charger_usb_link_status_work(struct work_struct *work)
int detected_chargers;
int ret;
u8 val;
+ u8 link_status;
struct ab8500_charger *di = container_of(work,
struct ab8500_charger, usb_link_status_work);
@@ -2144,38 +2321,61 @@ static void ab8500_charger_usb_link_status_work(struct work_struct *work)
* to start the charging process. but by jumping
* thru a few hoops it can be forced to start.
*/
- ret = abx500_get_register_interruptible(di->dev, AB8500_USB,
- AB8500_USB_LINE_STAT_REG, &val);
+ if (is_ab8500(di->parent))
+ ret = abx500_get_register_interruptible(di->dev, AB8500_USB,
+ AB8500_USB_LINE_STAT_REG, &val);
+ else
+ ret = abx500_get_register_interruptible(di->dev, AB8500_USB,
+ AB8500_USB_LINK1_STAT_REG, &val);
+
if (ret >= 0)
dev_dbg(di->dev, "UsbLineStatus register = 0x%02x\n", val);
else
dev_dbg(di->dev, "Error reading USB link status\n");
+ if (is_ab8500(di->parent))
+ link_status = AB8500_USB_LINK_STATUS;
+ else
+ link_status = AB8505_USB_LINK_STATUS;
+
if (detected_chargers & USB_PW_CONN) {
- if (((val & AB8500_USB_LINK_STATUS) >> 3) == USB_STAT_NOT_VALID_LINK &&
+ if (((val & link_status) >> USB_LINK_STATUS_SHIFT) ==
+ USB_STAT_NOT_VALID_LINK &&
di->invalid_charger_detect_state == 0) {
- dev_dbg(di->dev, "Invalid charger detected, state= 0\n");
+ dev_dbg(di->dev,
+ "Invalid charger detected, state= 0\n");
/*Enable charger*/
abx500_mask_and_set_register_interruptible(di->dev,
- AB8500_CHARGER, AB8500_USBCH_CTRL1_REG, 0x01, 0x01);
+ AB8500_CHARGER, AB8500_USBCH_CTRL1_REG,
+ USB_CH_ENA, USB_CH_ENA);
/*Enable charger detection*/
- abx500_mask_and_set_register_interruptible(di->dev, AB8500_USB,
- AB8500_MCH_IPT_CURLVL_REG, 0x01, 0x01);
+ abx500_mask_and_set_register_interruptible(di->dev,
+ AB8500_USB, AB8500_USB_LINE_CTRL2_REG,
+ USB_CH_DET, USB_CH_DET);
di->invalid_charger_detect_state = 1;
/*exit and wait for new link status interrupt.*/
return;
}
if (di->invalid_charger_detect_state == 1) {
- dev_dbg(di->dev, "Invalid charger detected, state= 1\n");
+ dev_dbg(di->dev,
+ "Invalid charger detected, state= 1\n");
/*Stop charger detection*/
- abx500_mask_and_set_register_interruptible(di->dev, AB8500_USB,
- AB8500_MCH_IPT_CURLVL_REG, 0x01, 0x00);
+ abx500_mask_and_set_register_interruptible(di->dev,
+ AB8500_USB, AB8500_USB_LINE_CTRL2_REG,
+ USB_CH_DET, 0x00);
/*Check link status*/
- ret = abx500_get_register_interruptible(di->dev, AB8500_USB,
- AB8500_USB_LINE_STAT_REG, &val);
+ if (is_ab8500(di->parent))
+ ret = abx500_get_register_interruptible(di->dev,
+ AB8500_USB, AB8500_USB_LINE_STAT_REG,
+ &val);
+ else
+ ret = abx500_get_register_interruptible(di->dev,
+ AB8500_USB, AB8500_USB_LINK1_STAT_REG,
+ &val);
+
dev_dbg(di->dev, "USB link status= 0x%02x\n",
- (val & AB8500_USB_LINK_STATUS) >> 3);
+ (val & link_status) >> USB_LINK_STATUS_SHIFT);
di->invalid_charger_detect_state = 2;
}
} else {
@@ -2273,7 +2473,7 @@ static void ab8500_charger_usb_state_changed_work(struct work_struct *work)
if (!ab8500_charger_get_usb_cur(di)) {
/* Update maximum input current */
ret = ab8500_charger_set_vbus_in_curr(di,
- di->max_usb_in_curr);
+ di->max_usb_in_curr.usb_type_max);
if (ret)
return;
@@ -2422,7 +2622,9 @@ static irqreturn_t ab8500_charger_mainchplugdet_handler(int irq, void *_di)
mutex_lock(&di->charger_attached_mutex);
mutex_unlock(&di->charger_attached_mutex);
- queue_delayed_work(di->charger_wq,
+
+ if (is_ab8500(di->parent))
+ queue_delayed_work(di->charger_wq,
&di->ac_charger_attached_work,
HZ);
return IRQ_HANDLED;
@@ -2491,6 +2693,8 @@ static void ab8500_charger_vbus_drop_end_work(struct work_struct *work)
{
struct ab8500_charger *di = container_of(work,
struct ab8500_charger, vbus_drop_end_work.work);
+ int ret, curr;
+ u8 reg_value;
di->flags.vbus_drop_end = false;
@@ -2498,8 +2702,45 @@ static void ab8500_charger_vbus_drop_end_work(struct work_struct *work)
abx500_set_register_interruptible(di->dev,
AB8500_CHARGER, AB8500_CHARGER_CTRL, 0x01);
+ if (is_ab8540(di->parent))
+ ret = abx500_get_register_interruptible(di->dev, AB8500_CHARGER,
+ AB8540_CH_USBCH_STAT3_REG, &reg_value);
+ else
+ ret = abx500_get_register_interruptible(di->dev, AB8500_CHARGER,
+ AB8500_CH_USBCH_STAT2_REG, &reg_value);
+ if (ret < 0) {
+ dev_err(di->dev, "%s read failed\n", __func__);
+ return;
+ }
+
+ if (is_ab8540(di->parent))
+ curr = di->bm->chg_input_curr[
+ reg_value & AB8540_AUTO_VBUS_IN_CURR_MASK];
+ else
+ curr = di->bm->chg_input_curr[
+ reg_value >> AUTO_VBUS_IN_CURR_LIM_SHIFT];
+
+ if (di->max_usb_in_curr.calculated_max != curr) {
+ /* USB source is collapsing */
+ di->max_usb_in_curr.calculated_max = curr;
+ dev_dbg(di->dev,
+ "VBUS input current limiting to %d mA\n",
+ di->max_usb_in_curr.calculated_max);
+ } else {
+ /*
+ * USB source can not give more than this amount.
+ * Taking more will collapse the source.
+ */
+ di->max_usb_in_curr.set_max =
+ di->max_usb_in_curr.calculated_max;
+ dev_dbg(di->dev,
+ "VBUS input current limited to %d mA\n",
+ di->max_usb_in_curr.set_max);
+ }
+
if (di->usb.charger_connected)
- ab8500_charger_set_vbus_in_curr(di, di->max_usb_in_curr);
+ ab8500_charger_set_vbus_in_curr(di,
+ di->max_usb_in_curr.usb_type_max);
}
/**
@@ -2654,8 +2895,13 @@ static irqreturn_t ab8500_charger_vbuschdropend_handler(int irq, void *_di)
dev_dbg(di->dev, "VBUS charger drop ended\n");
di->flags.vbus_drop_end = true;
+
+ /*
+ * VBUS might have dropped due to bad connection.
+ * Schedule a new input limit set to the value SW requests.
+ */
queue_delayed_work(di->charger_wq, &di->vbus_drop_end_work,
- round_jiffies(30 * HZ));
+ round_jiffies(VBUS_IN_CURR_LIM_RETRY_SET_TIME * HZ));
return IRQ_HANDLED;
}
@@ -2836,6 +3082,7 @@ static int ab8500_charger_usb_get_property(struct power_supply *psy,
static int ab8500_charger_init_hw_registers(struct ab8500_charger *di)
{
int ret = 0;
+ u8 bup_vch_range = 0, vbup33_vrtcn = 0;
/* Setup maximum charger current and voltage for ABB cut2.0 */
if (!is_ab8500_1p1_or_earlier(di->parent)) {
@@ -2848,9 +3095,14 @@ static int ab8500_charger_init_hw_registers(struct ab8500_charger *di)
goto out;
}
- ret = abx500_set_register_interruptible(di->dev,
- AB8500_CHARGER,
- AB8500_CH_OPT_CRNTLVL_MAX_REG, CH_OP_CUR_LVL_1P6);
+ if (is_ab8540(di->parent))
+ ret = abx500_set_register_interruptible(di->dev,
+ AB8500_CHARGER, AB8500_CH_OPT_CRNTLVL_MAX_REG,
+ CH_OP_CUR_LVL_2P);
+ else
+ ret = abx500_set_register_interruptible(di->dev,
+ AB8500_CHARGER, AB8500_CH_OPT_CRNTLVL_MAX_REG,
+ CH_OP_CUR_LVL_1P6);
if (ret) {
dev_err(di->dev,
"failed to set CH_OPT_CRNTLVL_MAX_REG\n");
@@ -2858,7 +3110,8 @@ static int ab8500_charger_init_hw_registers(struct ab8500_charger *di)
}
}
- if (is_ab9540_2p0(di->parent) || is_ab8505_2p0(di->parent))
+ if (is_ab9540_2p0(di->parent) || is_ab9540_3p0(di->parent)
+ || is_ab8505_2p0(di->parent) || is_ab8540(di->parent))
ret = abx500_mask_and_set_register_interruptible(di->dev,
AB8500_CHARGER,
AB8500_USBCH_CTRL2_REG,
@@ -2930,14 +3183,6 @@ static int ab8500_charger_init_hw_registers(struct ab8500_charger *di)
goto out;
}
- /* Set charger watchdog timeout */
- ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER,
- AB8500_CH_WD_TIMER_REG, WD_TIMER);
- if (ret) {
- dev_err(di->dev, "failed to set charger watchdog timeout\n");
- goto out;
- }
-
ret = ab8500_charger_led_en(di, false);
if (ret < 0) {
dev_err(di->dev, "failed to disable LED\n");
@@ -2945,15 +3190,30 @@ static int ab8500_charger_init_hw_registers(struct ab8500_charger *di)
}
/* Backup battery voltage and current */
+ if (di->bm->bkup_bat_v > BUP_VCH_SEL_3P1V)
+ bup_vch_range = BUP_VCH_RANGE;
+ if (di->bm->bkup_bat_v == BUP_VCH_SEL_3P3V)
+ vbup33_vrtcn = VBUP33_VRTCN;
+
ret = abx500_set_register_interruptible(di->dev,
AB8500_RTC,
AB8500_RTC_BACKUP_CHG_REG,
- di->bm->bkup_bat_v |
- di->bm->bkup_bat_i);
+ (di->bm->bkup_bat_v & 0x3) | di->bm->bkup_bat_i);
if (ret) {
dev_err(di->dev, "failed to setup backup battery charging\n");
goto out;
}
+ if (is_ab8540(di->parent)) {
+ ret = abx500_set_register_interruptible(di->dev,
+ AB8500_RTC,
+ AB8500_RTC_CTRL1_REG,
+ bup_vch_range | vbup33_vrtcn);
+ if (ret) {
+ dev_err(di->dev,
+ "failed to setup backup battery charging\n");
+ goto out;
+ }
+ }
/* Enable backup battery charging */
abx500_mask_and_set_register_interruptible(di->dev,
@@ -2962,6 +3222,25 @@ static int ab8500_charger_init_hw_registers(struct ab8500_charger *di)
if (ret < 0)
dev_err(di->dev, "%s mask and set failed\n", __func__);
+ if (is_ab8540(di->parent)) {
+ ret = abx500_mask_and_set_register_interruptible(di->dev,
+ AB8500_CHARGER, AB8540_USB_PP_MODE_REG,
+ BUS_VSYS_VOL_SELECT_MASK, BUS_VSYS_VOL_SELECT_3P6V);
+ if (ret) {
+ dev_err(di->dev,
+ "failed to setup usb power path vsys voltage\n");
+ goto out;
+ }
+ ret = abx500_mask_and_set_register_interruptible(di->dev,
+ AB8500_CHARGER, AB8540_USB_PP_CHR_REG,
+ BUS_PP_PRECHG_CURRENT_MASK, 0);
+ if (ret) {
+ dev_err(di->dev,
+ "failed to setup usb power path prechage current\n");
+ goto out;
+ }
+ }
+
out:
return ret;
}
@@ -3055,11 +3334,8 @@ static int ab8500_charger_resume(struct platform_device *pdev)
dev_err(di->dev, "Failed to kick WD!\n");
/* If not already pending start a new timer */
- if (!delayed_work_pending(
- &di->kick_wd_work)) {
- queue_delayed_work(di->charger_wq, &di->kick_wd_work,
- round_jiffies(WD_KICK_INTERVAL));
- }
+ queue_delayed_work(di->charger_wq, &di->kick_wd_work,
+ round_jiffies(WD_KICK_INTERVAL));
}
/* If we still have a HW failure, schedule a new check */
@@ -3079,12 +3355,9 @@ static int ab8500_charger_suspend(struct platform_device *pdev,
{
struct ab8500_charger *di = platform_get_drvdata(pdev);
- /* Cancel any pending HW failure check */
- if (delayed_work_pending(&di->check_hw_failure_work))
- cancel_delayed_work(&di->check_hw_failure_work);
-
- if (delayed_work_pending(&di->vbus_drop_end_work))
- cancel_delayed_work(&di->vbus_drop_end_work);
+ /* Cancel any pending jobs */
+ cancel_delayed_work(&di->check_hw_failure_work);
+ cancel_delayed_work(&di->vbus_drop_end_work);
flush_delayed_work(&di->attach_work);
flush_delayed_work(&di->usb_charger_attached_work);
@@ -3107,6 +3380,10 @@ static int ab8500_charger_suspend(struct platform_device *pdev,
#define ab8500_charger_resume NULL
#endif
+static struct notifier_block charger_nb = {
+ .notifier_call = ab8500_external_charger_prepare,
+};
+
static int ab8500_charger_remove(struct platform_device *pdev)
{
struct ab8500_charger *di = platform_get_drvdata(pdev);
@@ -3136,13 +3413,18 @@ static int ab8500_charger_remove(struct platform_device *pdev)
/* Delete the work queue */
destroy_workqueue(di->charger_wq);
+ /* Unregister external charger enable notifier */
+ if (!di->ac_chg.enabled)
+ blocking_notifier_chain_unregister(
+ &charger_notifier_list, &charger_nb);
+
flush_scheduled_work();
- if(di->usb_chg.enabled)
+ if (di->usb_chg.enabled)
power_supply_unregister(&di->usb_chg.psy);
-#if !defined(CONFIG_CHARGER_PM2301)
- if(di->ac_chg.enabled)
+
+ if (di->ac_chg.enabled && !di->ac_chg.external)
power_supply_unregister(&di->ac_chg.psy);
-#endif
+
platform_set_drvdata(pdev, NULL);
return 0;
@@ -3206,16 +3488,22 @@ static int ab8500_charger_probe(struct platform_device *pdev)
di->ac_chg.psy.num_supplicants = ARRAY_SIZE(supply_interface),
/* ux500_charger sub-class */
di->ac_chg.ops.enable = &ab8500_charger_ac_en;
+ di->ac_chg.ops.check_enable = &ab8500_charger_ac_check_enable;
di->ac_chg.ops.kick_wd = &ab8500_charger_watchdog_kick;
di->ac_chg.ops.update_curr = &ab8500_charger_update_charger_current;
di->ac_chg.max_out_volt = ab8500_charger_voltage_map[
ARRAY_SIZE(ab8500_charger_voltage_map) - 1];
- di->ac_chg.max_out_curr = ab8500_charger_current_map[
- ARRAY_SIZE(ab8500_charger_current_map) - 1];
+ di->ac_chg.max_out_curr =
+ di->bm->chg_output_curr[di->bm->n_chg_out_curr - 1];
di->ac_chg.wdt_refresh = CHG_WD_INTERVAL;
di->ac_chg.enabled = di->bm->ac_enabled;
di->ac_chg.external = false;
+ /*notifier for external charger enabling*/
+ if (!di->ac_chg.enabled)
+ blocking_notifier_chain_register(
+ &charger_notifier_list, &charger_nb);
+
/* USB supply */
/* power_supply base class */
di->usb_chg.psy.name = "ab8500_usb";
@@ -3227,15 +3515,20 @@ static int ab8500_charger_probe(struct platform_device *pdev)
di->usb_chg.psy.num_supplicants = ARRAY_SIZE(supply_interface),
/* ux500_charger sub-class */
di->usb_chg.ops.enable = &ab8500_charger_usb_en;
+ di->usb_chg.ops.check_enable = &ab8500_charger_usb_check_enable;
di->usb_chg.ops.kick_wd = &ab8500_charger_watchdog_kick;
di->usb_chg.ops.update_curr = &ab8500_charger_update_charger_current;
+ di->usb_chg.ops.pp_enable = &ab8540_charger_power_path_enable;
+ di->usb_chg.ops.pre_chg_enable = &ab8540_charger_usb_pre_chg_enable;
di->usb_chg.max_out_volt = ab8500_charger_voltage_map[
ARRAY_SIZE(ab8500_charger_voltage_map) - 1];
- di->usb_chg.max_out_curr = ab8500_charger_current_map[
- ARRAY_SIZE(ab8500_charger_current_map) - 1];
+ di->usb_chg.max_out_curr =
+ di->bm->chg_output_curr[di->bm->n_chg_out_curr - 1];
di->usb_chg.wdt_refresh = CHG_WD_INTERVAL;
di->usb_chg.enabled = di->bm->usb_enabled;
di->usb_chg.external = false;
+ di->usb_chg.power_path = di->bm->usb_power_path;
+ di->usb_state.usb_current = -1;
/* Create a work queue for the charger */
di->charger_wq =
@@ -3316,7 +3609,7 @@ static int ab8500_charger_probe(struct platform_device *pdev)
}
/* Register AC charger class */
- if(di->ac_chg.enabled) {
+ if (di->ac_chg.enabled) {
ret = power_supply_register(di->dev, &di->ac_chg.psy);
if (ret) {
dev_err(di->dev, "failed to register AC charger\n");
@@ -3325,7 +3618,7 @@ static int ab8500_charger_probe(struct platform_device *pdev)
}
/* Register USB charger class */
- if(di->usb_chg.enabled) {
+ if (di->usb_chg.enabled) {
ret = power_supply_register(di->dev, &di->usb_chg.psy);
if (ret) {
dev_err(di->dev, "failed to register USB charger\n");
@@ -3385,14 +3678,16 @@ static int ab8500_charger_probe(struct platform_device *pdev)
ch_stat = ab8500_charger_detect_chargers(di, false);
if ((ch_stat & AC_PW_CONN) == AC_PW_CONN) {
- queue_delayed_work(di->charger_wq,
- &di->ac_charger_attached_work,
- HZ);
+ if (is_ab8500(di->parent))
+ queue_delayed_work(di->charger_wq,
+ &di->ac_charger_attached_work,
+ HZ);
}
if ((ch_stat & USB_PW_CONN) == USB_PW_CONN) {
- queue_delayed_work(di->charger_wq,
- &di->usb_charger_attached_work,
- HZ);
+ if (is_ab8500(di->parent))
+ queue_delayed_work(di->charger_wq,
+ &di->usb_charger_attached_work,
+ HZ);
}
mutex_unlock(&di->charger_attached_mutex);
@@ -3410,10 +3705,10 @@ free_irq:
put_usb_phy:
usb_put_phy(di->usb_phy);
free_usb:
- if(di->usb_chg.enabled)
+ if (di->usb_chg.enabled)
power_supply_unregister(&di->usb_chg.psy);
free_ac:
- if(di->ac_chg.enabled)
+ if (di->ac_chg.enabled)
power_supply_unregister(&di->ac_chg.psy);
free_charger_wq:
destroy_workqueue(di->charger_wq);
diff --git a/drivers/power/ab8500_fg.c b/drivers/power/ab8500_fg.c
index 25dae4c4b0ef..c5391f5c372d 100644
--- a/drivers/power/ab8500_fg.c
+++ b/drivers/power/ab8500_fg.c
@@ -36,7 +36,7 @@
#define MILLI_TO_MICRO 1000
#define FG_LSB_IN_MA 1627
-#define QLSB_NANO_AMP_HOURS_X10 1129
+#define QLSB_NANO_AMP_HOURS_X10 1071
#define INS_CURR_TIMEOUT (3 * HZ)
#define SEC_TO_SAMPLE(S) (S * 4)
@@ -672,11 +672,11 @@ int ab8500_fg_inst_curr_finalize(struct ab8500_fg *di, int *res)
/*
* Convert to unit value in mA
* Full scale input voltage is
- * 66.660mV => LSB = 66.660mV/(4096*res) = 1.627mA
+ * 63.160mV => LSB = 63.160mV/(4096*res) = 1.542mA
* Given a 250ms conversion cycle time the LSB corresponds
- * to 112.9 nAh. Convert to current by dividing by the conversion
+ * to 107.1 nAh. Convert to current by dividing by the conversion
* time in hours (250ms = 1 / (3600 * 4)h)
- * 112.9nAh assumes 10mOhm, but fg_res is in 0.1mOhm
+ * 107.1nAh assumes 10mOhm, but fg_res is in 0.1mOhm
*/
val = (val * QLSB_NANO_AMP_HOURS_X10 * 36 * 4) /
(1000 * di->bm->fg_res);
@@ -863,7 +863,7 @@ static int ab8500_fg_bat_voltage(struct ab8500_fg *di)
static int ab8500_fg_volt_to_capacity(struct ab8500_fg *di, int voltage)
{
int i, tbl_size;
- struct abx500_v_to_cap *tbl;
+ const struct abx500_v_to_cap *tbl;
int cap = 0;
tbl = di->bm->bat_type[di->bm->batt_id].v_to_cap_tbl,
@@ -915,7 +915,7 @@ static int ab8500_fg_uncomp_volt_to_capacity(struct ab8500_fg *di)
static int ab8500_fg_battery_resistance(struct ab8500_fg *di)
{
int i, tbl_size;
- struct batres_vs_temp *tbl;
+ const struct batres_vs_temp *tbl;
int resist = 0;
tbl = di->bm->bat_type[di->bm->batt_id].batres_tbl;
@@ -1354,9 +1354,6 @@ static void ab8500_fg_check_capacity_limits(struct ab8500_fg *di, bool init)
* algorithm says.
*/
di->bat_cap.prev_percent = 1;
- di->bat_cap.permille = 1;
- di->bat_cap.prev_mah = 1;
- di->bat_cap.mah = 1;
percent = 1;
changed = true;
@@ -1683,7 +1680,6 @@ static void ab8500_fg_algorithm_discharging(struct ab8500_fg *di)
break;
case AB8500_FG_DISCHARGE_WAKEUP:
- ab8500_fg_coulomb_counter(di, true);
ab8500_fg_calc_cap_discharge_voltage(di, true);
di->fg_samples = SEC_TO_SAMPLE(
@@ -1768,9 +1764,10 @@ static void ab8500_fg_algorithm(struct ab8500_fg *di)
ab8500_fg_algorithm_discharging(di);
}
- dev_dbg(di->dev, "[FG_DATA] %d %d %d %d %d %d %d %d %d "
+ dev_dbg(di->dev, "[FG_DATA] %d %d %d %d %d %d %d %d %d %d "
"%d %d %d %d %d %d %d\n",
di->bat_cap.max_mah_design,
+ di->bat_cap.max_mah,
di->bat_cap.mah,
di->bat_cap.permille,
di->bat_cap.level,
@@ -1982,7 +1979,7 @@ static void ab8500_fg_instant_work(struct work_struct *work)
}
/**
- * ab8500_fg_cc_data_end_handler() - isr to get battery avg current.
+ * ab8500_fg_cc_data_end_handler() - end of data conversion isr.
* @irq: interrupt number
* @_di: pointer to the ab8500_fg structure
*
@@ -2002,7 +1999,7 @@ static irqreturn_t ab8500_fg_cc_data_end_handler(int irq, void *_di)
}
/**
- * ab8500_fg_cc_convend_handler() - isr to get battery avg current.
+ * ab8500_fg_cc_int_calib_handler () - end of calibration isr.
* @irq: interrupt number
* @_di: pointer to the ab8500_fg structure
*
@@ -2153,9 +2150,7 @@ static int ab8500_fg_get_property(struct power_supply *psy,
val->intval = di->bat_cap.prev_mah;
break;
case POWER_SUPPLY_PROP_CAPACITY:
- if (di->bm->capacity_scaling)
- val->intval = di->bat_cap.cap_scale.scaled_cap;
- else if (di->flags.batt_unknown && !di->bm->chg_unknown_bat &&
+ if (di->flags.batt_unknown && !di->bm->chg_unknown_bat &&
di->flags.batt_id_received)
val->intval = 100;
else
@@ -2344,6 +2339,50 @@ static int ab8500_fg_init_hw_registers(struct ab8500_fg *di)
dev_err(di->dev, "BattOk init write failed.\n");
goto out;
}
+
+ if (((is_ab8505(di->parent) || is_ab9540(di->parent)) &&
+ abx500_get_chip_id(di->dev) >= AB8500_CUT2P0)
+ || is_ab8540(di->parent)) {
+ ret = abx500_set_register_interruptible(di->dev, AB8500_RTC,
+ AB8505_RTC_PCUT_MAX_TIME_REG, di->bm->fg_params->pcut_max_time);
+
+ if (ret) {
+ dev_err(di->dev, "%s write failed AB8505_RTC_PCUT_MAX_TIME_REG\n", __func__);
+ goto out;
+ };
+
+ ret = abx500_set_register_interruptible(di->dev, AB8500_RTC,
+ AB8505_RTC_PCUT_FLAG_TIME_REG, di->bm->fg_params->pcut_flag_time);
+
+ if (ret) {
+ dev_err(di->dev, "%s write failed AB8505_RTC_PCUT_FLAG_TIME_REG\n", __func__);
+ goto out;
+ };
+
+ ret = abx500_set_register_interruptible(di->dev, AB8500_RTC,
+ AB8505_RTC_PCUT_RESTART_REG, di->bm->fg_params->pcut_max_restart);
+
+ if (ret) {
+ dev_err(di->dev, "%s write failed AB8505_RTC_PCUT_RESTART_REG\n", __func__);
+ goto out;
+ };
+
+ ret = abx500_set_register_interruptible(di->dev, AB8500_RTC,
+ AB8505_RTC_PCUT_DEBOUNCE_REG, di->bm->fg_params->pcut_debounce_time);
+
+ if (ret) {
+ dev_err(di->dev, "%s write failed AB8505_RTC_PCUT_DEBOUNCE_REG\n", __func__);
+ goto out;
+ };
+
+ ret = abx500_set_register_interruptible(di->dev, AB8500_RTC,
+ AB8505_RTC_PCUT_CTL_STATUS_REG, di->bm->fg_params->pcut_enable);
+
+ if (ret) {
+ dev_err(di->dev, "%s write failed AB8505_RTC_PCUT_CTL_STATUS_REG\n", __func__);
+ goto out;
+ };
+ }
out:
return ret;
}
@@ -2546,6 +2585,428 @@ static int ab8500_fg_sysfs_init(struct ab8500_fg *di)
return ret;
}
+
+static ssize_t ab8505_powercut_flagtime_read(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ int ret;
+ u8 reg_value;
+ struct power_supply *psy = dev_get_drvdata(dev);
+ struct ab8500_fg *di;
+
+ di = to_ab8500_fg_device_info(psy);
+
+ ret = abx500_get_register_interruptible(di->dev, AB8500_RTC,
+ AB8505_RTC_PCUT_FLAG_TIME_REG, &reg_value);
+
+ if (ret < 0) {
+ dev_err(dev, "Failed to read AB8505_RTC_PCUT_FLAG_TIME_REG\n");
+ goto fail;
+ }
+
+ return scnprintf(buf, PAGE_SIZE, "%d\n", (reg_value & 0x7F));
+
+fail:
+ return ret;
+}
+
+static ssize_t ab8505_powercut_flagtime_write(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ int ret;
+ long unsigned reg_value;
+ struct power_supply *psy = dev_get_drvdata(dev);
+ struct ab8500_fg *di;
+
+ di = to_ab8500_fg_device_info(psy);
+
+ reg_value = simple_strtoul(buf, NULL, 10);
+
+ if (reg_value > 0x7F) {
+ dev_err(dev, "Incorrect parameter, echo 0 (1.98s) - 127 (15.625ms) for flagtime\n");
+ goto fail;
+ }
+
+ ret = abx500_set_register_interruptible(di->dev, AB8500_RTC,
+ AB8505_RTC_PCUT_FLAG_TIME_REG, (u8)reg_value);
+
+ if (ret < 0)
+ dev_err(dev, "Failed to set AB8505_RTC_PCUT_FLAG_TIME_REG\n");
+
+fail:
+ return count;
+}
+
+static ssize_t ab8505_powercut_maxtime_read(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ int ret;
+ u8 reg_value;
+ struct power_supply *psy = dev_get_drvdata(dev);
+ struct ab8500_fg *di;
+
+ di = to_ab8500_fg_device_info(psy);
+
+ ret = abx500_get_register_interruptible(di->dev, AB8500_RTC,
+ AB8505_RTC_PCUT_MAX_TIME_REG, &reg_value);
+
+ if (ret < 0) {
+ dev_err(dev, "Failed to read AB8505_RTC_PCUT_MAX_TIME_REG\n");
+ goto fail;
+ }
+
+ return scnprintf(buf, PAGE_SIZE, "%d\n", (reg_value & 0x7F));
+
+fail:
+ return ret;
+
+}
+
+static ssize_t ab8505_powercut_maxtime_write(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ int ret;
+ int reg_value;
+ struct power_supply *psy = dev_get_drvdata(dev);
+ struct ab8500_fg *di;
+
+ di = to_ab8500_fg_device_info(psy);
+
+ reg_value = simple_strtoul(buf, NULL, 10);
+ if (reg_value > 0x7F) {
+ dev_err(dev, "Incorrect parameter, echo 0 (0.0s) - 127 (1.98s) for maxtime\n");
+ goto fail;
+ }
+
+ ret = abx500_set_register_interruptible(di->dev, AB8500_RTC,
+ AB8505_RTC_PCUT_MAX_TIME_REG, (u8)reg_value);
+
+ if (ret < 0)
+ dev_err(dev, "Failed to set AB8505_RTC_PCUT_MAX_TIME_REG\n");
+
+fail:
+ return count;
+}
+
+static ssize_t ab8505_powercut_restart_read(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ int ret;
+ u8 reg_value;
+ struct power_supply *psy = dev_get_drvdata(dev);
+ struct ab8500_fg *di;
+
+ di = to_ab8500_fg_device_info(psy);
+
+ ret = abx500_get_register_interruptible(di->dev, AB8500_RTC,
+ AB8505_RTC_PCUT_RESTART_REG, &reg_value);
+
+ if (ret < 0) {
+ dev_err(dev, "Failed to read AB8505_RTC_PCUT_RESTART_REG\n");
+ goto fail;
+ }
+
+ return scnprintf(buf, PAGE_SIZE, "%d\n", (reg_value & 0xF));
+
+fail:
+ return ret;
+}
+
+static ssize_t ab8505_powercut_restart_write(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ int ret;
+ int reg_value;
+ struct power_supply *psy = dev_get_drvdata(dev);
+ struct ab8500_fg *di;
+
+ di = to_ab8500_fg_device_info(psy);
+
+ reg_value = simple_strtoul(buf, NULL, 10);
+ if (reg_value > 0xF) {
+ dev_err(dev, "Incorrect parameter, echo 0 - 15 for number of restart\n");
+ goto fail;
+ }
+
+ ret = abx500_set_register_interruptible(di->dev, AB8500_RTC,
+ AB8505_RTC_PCUT_RESTART_REG, (u8)reg_value);
+
+ if (ret < 0)
+ dev_err(dev, "Failed to set AB8505_RTC_PCUT_RESTART_REG\n");
+
+fail:
+ return count;
+
+}
+
+static ssize_t ab8505_powercut_timer_read(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ int ret;
+ u8 reg_value;
+ struct power_supply *psy = dev_get_drvdata(dev);
+ struct ab8500_fg *di;
+
+ di = to_ab8500_fg_device_info(psy);
+
+ ret = abx500_get_register_interruptible(di->dev, AB8500_RTC,
+ AB8505_RTC_PCUT_TIME_REG, &reg_value);
+
+ if (ret < 0) {
+ dev_err(dev, "Failed to read AB8505_RTC_PCUT_TIME_REG\n");
+ goto fail;
+ }
+
+ return scnprintf(buf, PAGE_SIZE, "%d\n", (reg_value & 0x7F));
+
+fail:
+ return ret;
+}
+
+static ssize_t ab8505_powercut_restart_counter_read(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ int ret;
+ u8 reg_value;
+ struct power_supply *psy = dev_get_drvdata(dev);
+ struct ab8500_fg *di;
+
+ di = to_ab8500_fg_device_info(psy);
+
+ ret = abx500_get_register_interruptible(di->dev, AB8500_RTC,
+ AB8505_RTC_PCUT_RESTART_REG, &reg_value);
+
+ if (ret < 0) {
+ dev_err(dev, "Failed to read AB8505_RTC_PCUT_RESTART_REG\n");
+ goto fail;
+ }
+
+ return scnprintf(buf, PAGE_SIZE, "%d\n", (reg_value & 0xF0) >> 4);
+
+fail:
+ return ret;
+}
+
+static ssize_t ab8505_powercut_read(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ int ret;
+ u8 reg_value;
+ struct power_supply *psy = dev_get_drvdata(dev);
+ struct ab8500_fg *di;
+
+ di = to_ab8500_fg_device_info(psy);
+
+ ret = abx500_get_register_interruptible(di->dev, AB8500_RTC,
+ AB8505_RTC_PCUT_CTL_STATUS_REG, &reg_value);
+
+ if (ret < 0)
+ goto fail;
+
+ return scnprintf(buf, PAGE_SIZE, "%d\n", (reg_value & 0x1));
+
+fail:
+ return ret;
+}
+
+static ssize_t ab8505_powercut_write(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ int ret;
+ int reg_value;
+ struct power_supply *psy = dev_get_drvdata(dev);
+ struct ab8500_fg *di;
+
+ di = to_ab8500_fg_device_info(psy);
+
+ reg_value = simple_strtoul(buf, NULL, 10);
+ if (reg_value > 0x1) {
+ dev_err(dev, "Incorrect parameter, echo 0/1 to disable/enable Pcut feature\n");
+ goto fail;
+ }
+
+ ret = abx500_set_register_interruptible(di->dev, AB8500_RTC,
+ AB8505_RTC_PCUT_CTL_STATUS_REG, (u8)reg_value);
+
+ if (ret < 0)
+ dev_err(dev, "Failed to set AB8505_RTC_PCUT_CTL_STATUS_REG\n");
+
+fail:
+ return count;
+}
+
+static ssize_t ab8505_powercut_flag_read(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+
+ int ret;
+ u8 reg_value;
+ struct power_supply *psy = dev_get_drvdata(dev);
+ struct ab8500_fg *di;
+
+ di = to_ab8500_fg_device_info(psy);
+
+ ret = abx500_get_register_interruptible(di->dev, AB8500_RTC,
+ AB8505_RTC_PCUT_CTL_STATUS_REG, &reg_value);
+
+ if (ret < 0) {
+ dev_err(dev, "Failed to read AB8505_RTC_PCUT_CTL_STATUS_REG\n");
+ goto fail;
+ }
+
+ return scnprintf(buf, PAGE_SIZE, "%d\n", ((reg_value & 0x10) >> 4));
+
+fail:
+ return ret;
+}
+
+static ssize_t ab8505_powercut_debounce_read(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ int ret;
+ u8 reg_value;
+ struct power_supply *psy = dev_get_drvdata(dev);
+ struct ab8500_fg *di;
+
+ di = to_ab8500_fg_device_info(psy);
+
+ ret = abx500_get_register_interruptible(di->dev, AB8500_RTC,
+ AB8505_RTC_PCUT_DEBOUNCE_REG, &reg_value);
+
+ if (ret < 0) {
+ dev_err(dev, "Failed to read AB8505_RTC_PCUT_DEBOUNCE_REG\n");
+ goto fail;
+ }
+
+ return scnprintf(buf, PAGE_SIZE, "%d\n", (reg_value & 0x7));
+
+fail:
+ return ret;
+}
+
+static ssize_t ab8505_powercut_debounce_write(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ int ret;
+ int reg_value;
+ struct power_supply *psy = dev_get_drvdata(dev);
+ struct ab8500_fg *di;
+
+ di = to_ab8500_fg_device_info(psy);
+
+ reg_value = simple_strtoul(buf, NULL, 10);
+ if (reg_value > 0x7) {
+ dev_err(dev, "Incorrect parameter, echo 0 to 7 for debounce setting\n");
+ goto fail;
+ }
+
+ ret = abx500_set_register_interruptible(di->dev, AB8500_RTC,
+ AB8505_RTC_PCUT_DEBOUNCE_REG, (u8)reg_value);
+
+ if (ret < 0)
+ dev_err(dev, "Failed to set AB8505_RTC_PCUT_DEBOUNCE_REG\n");
+
+fail:
+ return count;
+}
+
+static ssize_t ab8505_powercut_enable_status_read(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ int ret;
+ u8 reg_value;
+ struct power_supply *psy = dev_get_drvdata(dev);
+ struct ab8500_fg *di;
+
+ di = to_ab8500_fg_device_info(psy);
+
+ ret = abx500_get_register_interruptible(di->dev, AB8500_RTC,
+ AB8505_RTC_PCUT_CTL_STATUS_REG, &reg_value);
+
+ if (ret < 0) {
+ dev_err(dev, "Failed to read AB8505_RTC_PCUT_CTL_STATUS_REG\n");
+ goto fail;
+ }
+
+ return scnprintf(buf, PAGE_SIZE, "%d\n", ((reg_value & 0x20) >> 5));
+
+fail:
+ return ret;
+}
+
+static struct device_attribute ab8505_fg_sysfs_psy_attrs[] = {
+ __ATTR(powercut_flagtime, (S_IRUGO | S_IWUSR | S_IWGRP),
+ ab8505_powercut_flagtime_read, ab8505_powercut_flagtime_write),
+ __ATTR(powercut_maxtime, (S_IRUGO | S_IWUSR | S_IWGRP),
+ ab8505_powercut_maxtime_read, ab8505_powercut_maxtime_write),
+ __ATTR(powercut_restart_max, (S_IRUGO | S_IWUSR | S_IWGRP),
+ ab8505_powercut_restart_read, ab8505_powercut_restart_write),
+ __ATTR(powercut_timer, S_IRUGO, ab8505_powercut_timer_read, NULL),
+ __ATTR(powercut_restart_counter, S_IRUGO,
+ ab8505_powercut_restart_counter_read, NULL),
+ __ATTR(powercut_enable, (S_IRUGO | S_IWUSR | S_IWGRP),
+ ab8505_powercut_read, ab8505_powercut_write),
+ __ATTR(powercut_flag, S_IRUGO, ab8505_powercut_flag_read, NULL),
+ __ATTR(powercut_debounce_time, (S_IRUGO | S_IWUSR | S_IWGRP),
+ ab8505_powercut_debounce_read, ab8505_powercut_debounce_write),
+ __ATTR(powercut_enable_status, S_IRUGO,
+ ab8505_powercut_enable_status_read, NULL),
+};
+
+static int ab8500_fg_sysfs_psy_create_attrs(struct device *dev)
+{
+ unsigned int i, j;
+ struct power_supply *psy = dev_get_drvdata(dev);
+ struct ab8500_fg *di;
+
+ di = to_ab8500_fg_device_info(psy);
+
+ if (((is_ab8505(di->parent) || is_ab9540(di->parent)) &&
+ abx500_get_chip_id(dev->parent) >= AB8500_CUT2P0)
+ || is_ab8540(di->parent)) {
+ for (j = 0; j < ARRAY_SIZE(ab8505_fg_sysfs_psy_attrs); j++)
+ if (device_create_file(dev, &ab8505_fg_sysfs_psy_attrs[j]))
+ goto sysfs_psy_create_attrs_failed_ab8505;
+ }
+ return 0;
+sysfs_psy_create_attrs_failed_ab8505:
+ dev_err(dev, "Failed creating sysfs psy attrs for ab8505.\n");
+ while (j--)
+ device_remove_file(dev, &ab8505_fg_sysfs_psy_attrs[i]);
+
+ return -EIO;
+}
+
+static void ab8500_fg_sysfs_psy_remove_attrs(struct device *dev)
+{
+ unsigned int i;
+ struct power_supply *psy = dev_get_drvdata(dev);
+ struct ab8500_fg *di;
+
+ di = to_ab8500_fg_device_info(psy);
+
+ if (((is_ab8505(di->parent) || is_ab9540(di->parent)) &&
+ abx500_get_chip_id(dev->parent) >= AB8500_CUT2P0)
+ || is_ab8540(di->parent)) {
+ for (i = 0; i < ARRAY_SIZE(ab8505_fg_sysfs_psy_attrs); i++)
+ (void)device_remove_file(dev, &ab8505_fg_sysfs_psy_attrs[i]);
+ }
+}
+
/* Exposure to the sysfs interface <<END>> */
#if defined(CONFIG_PM)
@@ -2607,6 +3068,7 @@ static int ab8500_fg_remove(struct platform_device *pdev)
ab8500_fg_sysfs_exit(di);
flush_scheduled_work();
+ ab8500_fg_sysfs_psy_remove_attrs(di->fg_psy.dev);
power_supply_unregister(&di->fg_psy);
platform_set_drvdata(pdev, NULL);
return ret;
@@ -2772,6 +3234,13 @@ static int ab8500_fg_probe(struct platform_device *pdev)
goto free_irq;
}
+ ret = ab8500_fg_sysfs_psy_create_attrs(di->fg_psy.dev);
+ if (ret) {
+ dev_err(di->dev, "failed to create FG psy\n");
+ ab8500_fg_sysfs_exit(di);
+ goto free_irq;
+ }
+
/* Calibrate the fg first time */
di->flags.calibrate = true;
di->calib_state = AB8500_FG_CALIB_INIT;
diff --git a/drivers/power/abx500_chargalg.c b/drivers/power/abx500_chargalg.c
index f043c0851a76..9863e423602c 100644
--- a/drivers/power/abx500_chargalg.c
+++ b/drivers/power/abx500_chargalg.c
@@ -1,5 +1,6 @@
/*
* Copyright (C) ST-Ericsson SA 2012
+ * Copyright (c) 2012 Sony Mobile Communications AB
*
* Charging algorithm driver for abx500 variants
*
@@ -8,11 +9,13 @@
* Johan Palsson <johan.palsson@stericsson.com>
* Karl Komierowski <karl.komierowski@stericsson.com>
* Arun R Murthy <arun.murthy@stericsson.com>
+ * Author: Imre Sunyi <imre.sunyi@sonymobile.com>
*/
#include <linux/init.h>
#include <linux/module.h>
#include <linux/device.h>
+#include <linux/hrtimer.h>
#include <linux/interrupt.h>
#include <linux/delay.h>
#include <linux/slab.h>
@@ -24,8 +27,10 @@
#include <linux/of.h>
#include <linux/mfd/core.h>
#include <linux/mfd/abx500.h>
+#include <linux/mfd/abx500/ab8500.h>
#include <linux/mfd/abx500/ux500_chargalg.h>
#include <linux/mfd/abx500/ab8500-bm.h>
+#include <linux/notifier.h>
/* Watchdog kick interval */
#define CHG_WD_INTERVAL (6 * HZ)
@@ -33,6 +38,18 @@
/* End-of-charge criteria counter */
#define EOC_COND_CNT 10
+/* One hour expressed in seconds */
+#define ONE_HOUR_IN_SECONDS 3600
+
+/* Five minutes expressed in seconds */
+#define FIVE_MINUTES_IN_SECONDS 300
+
+/* Plus margin for the low battery threshold */
+#define BAT_PLUS_MARGIN (100)
+
+#define CHARGALG_CURR_STEP_LOW 0
+#define CHARGALG_CURR_STEP_HIGH 100
+
#define to_abx500_chargalg_device_info(x) container_of((x), \
struct abx500_chargalg, chargalg_psy);
@@ -66,6 +83,11 @@ struct abx500_chargalg_suspension_status {
bool usb_suspended;
};
+struct abx500_chargalg_current_step_status {
+ bool curr_step_change;
+ int curr_step;
+};
+
struct abx500_chargalg_battery_data {
int temp;
int volt;
@@ -82,6 +104,7 @@ enum abx500_chargalg_states {
STATE_HW_TEMP_PROTECT_INIT,
STATE_HW_TEMP_PROTECT,
STATE_NORMAL_INIT,
+ STATE_USB_PP_PRE_CHARGE,
STATE_NORMAL,
STATE_WAIT_FOR_RECHARGE_INIT,
STATE_WAIT_FOR_RECHARGE,
@@ -113,6 +136,7 @@ static const char *states[] = {
"HW_TEMP_PROTECT_INIT",
"HW_TEMP_PROTECT",
"NORMAL_INIT",
+ "USB_PP_PRE_CHARGE",
"NORMAL",
"WAIT_FOR_RECHARGE_INIT",
"WAIT_FOR_RECHARGE",
@@ -204,6 +228,8 @@ enum maxim_ret {
* @batt_data: data of the battery
* @susp_status: current charger suspension status
* @bm: Platform specific battery management information
+ * @curr_status: Current step status for over-current protection
+ * @parent: pointer to the struct abx500
* @chargalg_psy: structure that holds the battery properties exposed by
* the charging algorithm
* @events: structure for information about events triggered
@@ -227,6 +253,8 @@ struct abx500_chargalg {
struct abx500_chargalg_charger_info chg_info;
struct abx500_chargalg_battery_data batt_data;
struct abx500_chargalg_suspension_status susp_status;
+ struct ab8500 *parent;
+ struct abx500_chargalg_current_step_status curr_status;
struct abx500_bm_data *bm;
struct power_supply chargalg_psy;
struct ux500_charger *ac_chg;
@@ -236,51 +264,69 @@ struct abx500_chargalg {
struct delayed_work chargalg_periodic_work;
struct delayed_work chargalg_wd_work;
struct work_struct chargalg_work;
- struct timer_list safety_timer;
- struct timer_list maintenance_timer;
+ struct hrtimer safety_timer;
+ struct hrtimer maintenance_timer;
struct kobject chargalg_kobject;
};
+/*External charger prepare notifier*/
+BLOCKING_NOTIFIER_HEAD(charger_notifier_list);
+
/* Main battery properties */
static enum power_supply_property abx500_chargalg_props[] = {
POWER_SUPPLY_PROP_STATUS,
POWER_SUPPLY_PROP_HEALTH,
};
+struct abx500_chargalg_sysfs_entry {
+ struct attribute attr;
+ ssize_t (*show)(struct abx500_chargalg *, char *);
+ ssize_t (*store)(struct abx500_chargalg *, const char *, size_t);
+};
+
/**
* abx500_chargalg_safety_timer_expired() - Expiration of the safety timer
- * @data: pointer to the abx500_chargalg structure
+ * @timer: pointer to the hrtimer structure
*
* This function gets called when the safety timer for the charger
* expires
*/
-static void abx500_chargalg_safety_timer_expired(unsigned long data)
+static enum hrtimer_restart
+abx500_chargalg_safety_timer_expired(struct hrtimer *timer)
{
- struct abx500_chargalg *di = (struct abx500_chargalg *) data;
+ struct abx500_chargalg *di = container_of(timer, struct abx500_chargalg,
+ safety_timer);
dev_err(di->dev, "Safety timer expired\n");
di->events.safety_timer_expired = true;
/* Trigger execution of the algorithm instantly */
queue_work(di->chargalg_wq, &di->chargalg_work);
+
+ return HRTIMER_NORESTART;
}
/**
* abx500_chargalg_maintenance_timer_expired() - Expiration of
* the maintenance timer
- * @i: pointer to the abx500_chargalg structure
+ * @timer: pointer to the timer structure
*
* This function gets called when the maintenence timer
* expires
*/
-static void abx500_chargalg_maintenance_timer_expired(unsigned long data)
+static enum hrtimer_restart
+abx500_chargalg_maintenance_timer_expired(struct hrtimer *timer)
{
- struct abx500_chargalg *di = (struct abx500_chargalg *) data;
+ struct abx500_chargalg *di = container_of(timer, struct abx500_chargalg,
+ maintenance_timer);
+
dev_dbg(di->dev, "Maintenance timer expired\n");
di->events.maintenance_timer_expired = true;
/* Trigger execution of the algorithm instantly */
queue_work(di->chargalg_wq, &di->chargalg_work);
+
+ return HRTIMER_NORESTART;
}
/**
@@ -303,6 +349,30 @@ static void abx500_chargalg_state_to(struct abx500_chargalg *di,
di->charge_state = state;
}
+static int abx500_chargalg_check_charger_enable(struct abx500_chargalg *di)
+{
+ switch (di->charge_state) {
+ case STATE_NORMAL:
+ case STATE_MAINTENANCE_A:
+ case STATE_MAINTENANCE_B:
+ break;
+ default:
+ return 0;
+ }
+
+ if (di->chg_info.charger_type & USB_CHG) {
+ return di->usb_chg->ops.check_enable(di->usb_chg,
+ di->bm->bat_type[di->bm->batt_id].normal_vol_lvl,
+ di->bm->bat_type[di->bm->batt_id].normal_cur_lvl);
+ } else if ((di->chg_info.charger_type & AC_CHG) &&
+ !(di->ac_chg->external)) {
+ return di->ac_chg->ops.check_enable(di->ac_chg,
+ di->bm->bat_type[di->bm->batt_id].normal_vol_lvl,
+ di->bm->bat_type[di->bm->batt_id].normal_cur_lvl);
+ }
+ return 0;
+}
+
/**
* abx500_chargalg_check_charger_connection() - Check charger connection change
* @di: pointer to the abx500_chargalg structure
@@ -348,6 +418,22 @@ static int abx500_chargalg_check_charger_connection(struct abx500_chargalg *di)
}
/**
+ * abx500_chargalg_check_current_step_status() - Check charging current
+ * step status.
+ * @di: pointer to the abx500_chargalg structure
+ *
+ * This function will check if there is a change in the charging current step
+ * and change charge state accordingly.
+ */
+static void abx500_chargalg_check_current_step_status
+ (struct abx500_chargalg *di)
+{
+ if (di->curr_status.curr_step_change)
+ abx500_chargalg_state_to(di, STATE_NORMAL_INIT);
+ di->curr_status.curr_step_change = false;
+}
+
+/**
* abx500_chargalg_start_safety_timer() - Start charging safety timer
* @di: pointer to the abx500_chargalg structure
*
@@ -356,19 +442,16 @@ static int abx500_chargalg_check_charger_connection(struct abx500_chargalg *di)
*/
static void abx500_chargalg_start_safety_timer(struct abx500_chargalg *di)
{
- unsigned long timer_expiration = 0;
+ /* Charger-dependent expiration time in hours*/
+ int timer_expiration = 0;
switch (di->chg_info.charger_type) {
case AC_CHG:
- timer_expiration =
- round_jiffies(jiffies +
- (di->bm->main_safety_tmr_h * 3600 * HZ));
+ timer_expiration = di->bm->main_safety_tmr_h;
break;
case USB_CHG:
- timer_expiration =
- round_jiffies(jiffies +
- (di->bm->usb_safety_tmr_h * 3600 * HZ));
+ timer_expiration = di->bm->usb_safety_tmr_h;
break;
default:
@@ -377,11 +460,10 @@ static void abx500_chargalg_start_safety_timer(struct abx500_chargalg *di)
}
di->events.safety_timer_expired = false;
- di->safety_timer.expires = timer_expiration;
- if (!timer_pending(&di->safety_timer))
- add_timer(&di->safety_timer);
- else
- mod_timer(&di->safety_timer, timer_expiration);
+ hrtimer_set_expires_range(&di->safety_timer,
+ ktime_set(timer_expiration * ONE_HOUR_IN_SECONDS, 0),
+ ktime_set(FIVE_MINUTES_IN_SECONDS, 0));
+ hrtimer_start_expires(&di->safety_timer, HRTIMER_MODE_REL);
}
/**
@@ -392,8 +474,8 @@ static void abx500_chargalg_start_safety_timer(struct abx500_chargalg *di)
*/
static void abx500_chargalg_stop_safety_timer(struct abx500_chargalg *di)
{
- di->events.safety_timer_expired = false;
- del_timer(&di->safety_timer);
+ if (hrtimer_try_to_cancel(&di->safety_timer) >= 0)
+ di->events.safety_timer_expired = false;
}
/**
@@ -408,17 +490,11 @@ static void abx500_chargalg_stop_safety_timer(struct abx500_chargalg *di)
static void abx500_chargalg_start_maintenance_timer(struct abx500_chargalg *di,
int duration)
{
- unsigned long timer_expiration;
-
- /* Convert from hours to jiffies */
- timer_expiration = round_jiffies(jiffies + (duration * 3600 * HZ));
-
+ hrtimer_set_expires_range(&di->maintenance_timer,
+ ktime_set(duration * ONE_HOUR_IN_SECONDS, 0),
+ ktime_set(FIVE_MINUTES_IN_SECONDS, 0));
di->events.maintenance_timer_expired = false;
- di->maintenance_timer.expires = timer_expiration;
- if (!timer_pending(&di->maintenance_timer))
- add_timer(&di->maintenance_timer);
- else
- mod_timer(&di->maintenance_timer, timer_expiration);
+ hrtimer_start_expires(&di->maintenance_timer, HRTIMER_MODE_REL);
}
/**
@@ -430,8 +506,8 @@ static void abx500_chargalg_start_maintenance_timer(struct abx500_chargalg *di,
*/
static void abx500_chargalg_stop_maintenance_timer(struct abx500_chargalg *di)
{
- di->events.maintenance_timer_expired = false;
- del_timer(&di->maintenance_timer);
+ if (hrtimer_try_to_cancel(&di->maintenance_timer) >= 0)
+ di->events.maintenance_timer_expired = false;
}
/**
@@ -477,6 +553,8 @@ static int abx500_chargalg_kick_watchdog(struct abx500_chargalg *di)
static int abx500_chargalg_ac_en(struct abx500_chargalg *di, int enable,
int vset, int iset)
{
+ static int abx500_chargalg_ex_ac_enable_toggle;
+
if (!di->ac_chg || !di->ac_chg->ops.enable)
return -ENXIO;
@@ -489,6 +567,14 @@ static int abx500_chargalg_ac_en(struct abx500_chargalg *di, int enable,
di->chg_info.ac_iset = iset;
di->chg_info.ac_vset = vset;
+ /* Enable external charger */
+ if (enable && di->ac_chg->external &&
+ !abx500_chargalg_ex_ac_enable_toggle) {
+ blocking_notifier_call_chain(&charger_notifier_list,
+ 0, di->dev);
+ abx500_chargalg_ex_ac_enable_toggle++;
+ }
+
return di->ac_chg->ops.enable(di->ac_chg, enable, vset, iset);
}
@@ -520,6 +606,37 @@ static int abx500_chargalg_usb_en(struct abx500_chargalg *di, int enable,
return di->usb_chg->ops.enable(di->usb_chg, enable, vset, iset);
}
+ /**
+ * ab8540_chargalg_usb_pp_en() - Enable/ disable USB power path
+ * @di: pointer to the abx500_chargalg structure
+ * @enable: power path enable/disable
+ *
+ * The USB power path will be enable/ disable
+ */
+static int ab8540_chargalg_usb_pp_en(struct abx500_chargalg *di, bool enable)
+{
+ if (!di->usb_chg || !di->usb_chg->ops.pp_enable)
+ return -ENXIO;
+
+ return di->usb_chg->ops.pp_enable(di->usb_chg, enable);
+}
+
+/**
+ * ab8540_chargalg_usb_pre_chg_en() - Enable/ disable USB pre-charge
+ * @di: pointer to the abx500_chargalg structure
+ * @enable: USB pre-charge enable/disable
+ *
+ * The USB USB pre-charge will be enable/ disable
+ */
+static int ab8540_chargalg_usb_pre_chg_en(struct abx500_chargalg *di,
+ bool enable)
+{
+ if (!di->usb_chg || !di->usb_chg->ops.pre_chg_enable)
+ return -ENXIO;
+
+ return di->usb_chg->ops.pre_chg_enable(di->usb_chg, enable);
+}
+
/**
* abx500_chargalg_update_chg_curr() - Update charger current
* @di: pointer to the abx500_chargalg structure
@@ -613,8 +730,6 @@ static void abx500_chargalg_hold_charging(struct abx500_chargalg *di)
static void abx500_chargalg_start_charging(struct abx500_chargalg *di,
int vset, int iset)
{
- bool start_chargalg_wd = true;
-
switch (di->chg_info.charger_type) {
case AC_CHG:
dev_dbg(di->dev,
@@ -632,12 +747,8 @@ static void abx500_chargalg_start_charging(struct abx500_chargalg *di,
default:
dev_err(di->dev, "Unknown charger to charge from\n");
- start_chargalg_wd = false;
break;
}
-
- if (start_chargalg_wd && !delayed_work_pending(&di->chargalg_wd_work))
- queue_delayed_work(di->chargalg_wq, &di->chargalg_wd_work, 0);
}
/**
@@ -725,6 +836,9 @@ static void abx500_chargalg_end_of_charge(struct abx500_chargalg *di)
di->batt_data.avg_curr > 0) {
if (++di->eoc_cnt >= EOC_COND_CNT) {
di->eoc_cnt = 0;
+ if ((di->chg_info.charger_type & USB_CHG) &&
+ (di->usb_chg->power_path))
+ ab8540_chargalg_usb_pp_en(di, true);
di->charge_status = POWER_SUPPLY_STATUS_FULL;
di->maintenance_chg = true;
dev_dbg(di->dev, "EOC reached!\n");
@@ -1217,6 +1331,8 @@ static void abx500_chargalg_external_power_changed(struct power_supply *psy)
static void abx500_chargalg_algorithm(struct abx500_chargalg *di)
{
int charger_status;
+ int ret;
+ int curr_step_lvl;
/* Collect data from all power_supply class devices */
class_for_each_device(power_supply_class, NULL,
@@ -1227,6 +1343,15 @@ static void abx500_chargalg_algorithm(struct abx500_chargalg *di)
abx500_chargalg_check_charger_voltage(di);
charger_status = abx500_chargalg_check_charger_connection(di);
+ abx500_chargalg_check_current_step_status(di);
+
+ if (is_ab8500(di->parent)) {
+ ret = abx500_chargalg_check_charger_enable(di);
+ if (ret < 0)
+ dev_err(di->dev, "Checking charger is enabled error"
+ ": Returned Value %d\n", ret);
+ }
+
/*
* First check if we have a charger connected.
* Also we don't allow charging of unknown batteries if configured
@@ -1416,9 +1541,34 @@ static void abx500_chargalg_algorithm(struct abx500_chargalg *di)
break;
case STATE_NORMAL_INIT:
- abx500_chargalg_start_charging(di,
- di->bm->bat_type[di->bm->batt_id].normal_vol_lvl,
- di->bm->bat_type[di->bm->batt_id].normal_cur_lvl);
+ if ((di->chg_info.charger_type & USB_CHG) &&
+ di->usb_chg->power_path) {
+ if (di->batt_data.volt >
+ (di->bm->fg_params->lowbat_threshold +
+ BAT_PLUS_MARGIN)) {
+ ab8540_chargalg_usb_pre_chg_en(di, false);
+ ab8540_chargalg_usb_pp_en(di, false);
+ } else {
+ ab8540_chargalg_usb_pp_en(di, true);
+ ab8540_chargalg_usb_pre_chg_en(di, true);
+ abx500_chargalg_state_to(di,
+ STATE_USB_PP_PRE_CHARGE);
+ break;
+ }
+ }
+
+ if (di->curr_status.curr_step == CHARGALG_CURR_STEP_LOW)
+ abx500_chargalg_stop_charging(di);
+ else {
+ curr_step_lvl = di->bm->bat_type[
+ di->bm->batt_id].normal_cur_lvl
+ * di->curr_status.curr_step
+ / CHARGALG_CURR_STEP_HIGH;
+ abx500_chargalg_start_charging(di,
+ di->bm->bat_type[di->bm->batt_id]
+ .normal_vol_lvl, curr_step_lvl);
+ }
+
abx500_chargalg_state_to(di, STATE_NORMAL);
abx500_chargalg_start_safety_timer(di);
abx500_chargalg_stop_maintenance_timer(di);
@@ -1430,6 +1580,13 @@ static void abx500_chargalg_algorithm(struct abx500_chargalg *di)
break;
+ case STATE_USB_PP_PRE_CHARGE:
+ if (di->batt_data.volt >
+ (di->bm->fg_params->lowbat_threshold +
+ BAT_PLUS_MARGIN))
+ abx500_chargalg_state_to(di, STATE_NORMAL_INIT);
+ break;
+
case STATE_NORMAL:
handle_maxim_chg_curr(di);
if (di->charge_status == POWER_SUPPLY_STATUS_FULL &&
@@ -1653,99 +1810,134 @@ static int abx500_chargalg_get_property(struct power_supply *psy,
/* Exposure to the sysfs interface */
-/**
- * abx500_chargalg_sysfs_show() - sysfs show operations
- * @kobj: pointer to the struct kobject
- * @attr: pointer to the struct attribute
- * @buf: buffer that holds the parameter to send to userspace
- *
- * Returns a buffer to be displayed in user space
- */
-static ssize_t abx500_chargalg_sysfs_show(struct kobject *kobj,
- struct attribute *attr, char *buf)
+static ssize_t abx500_chargalg_curr_step_show(struct abx500_chargalg *di,
+ char *buf)
{
- struct abx500_chargalg *di = container_of(kobj,
- struct abx500_chargalg, chargalg_kobject);
+ return sprintf(buf, "%d\n", di->curr_status.curr_step);
+}
+
+static ssize_t abx500_chargalg_curr_step_store(struct abx500_chargalg *di,
+ const char *buf, size_t length)
+{
+ long int param;
+ int ret;
+
+ ret = kstrtol(buf, 10, &param);
+ if (ret < 0)
+ return ret;
+
+ di->curr_status.curr_step = param;
+ if (di->curr_status.curr_step >= CHARGALG_CURR_STEP_LOW &&
+ di->curr_status.curr_step <= CHARGALG_CURR_STEP_HIGH) {
+ di->curr_status.curr_step_change = true;
+ queue_work(di->chargalg_wq, &di->chargalg_work);
+ } else
+ dev_info(di->dev, "Wrong current step\n"
+ "Enter 0. Disable AC/USB Charging\n"
+ "1--100. Set AC/USB charging current step\n"
+ "100. Enable AC/USB Charging\n");
+
+ return strlen(buf);
+}
+
+static ssize_t abx500_chargalg_en_show(struct abx500_chargalg *di,
+ char *buf)
+{
return sprintf(buf, "%d\n",
di->susp_status.ac_suspended &&
di->susp_status.usb_suspended);
}
-/**
- * abx500_chargalg_sysfs_charger() - sysfs store operations
- * @kobj: pointer to the struct kobject
- * @attr: pointer to the struct attribute
- * @buf: buffer that holds the parameter passed from userspace
- * @length: length of the parameter passed
- *
- * Returns length of the buffer(input taken from user space) on success
- * else error code on failure
- * The operation to be performed on passing the parameters from the user space.
- */
-static ssize_t abx500_chargalg_sysfs_charger(struct kobject *kobj,
- struct attribute *attr, const char *buf, size_t length)
+static ssize_t abx500_chargalg_en_store(struct abx500_chargalg *di,
+ const char *buf, size_t length)
{
- struct abx500_chargalg *di = container_of(kobj,
- struct abx500_chargalg, chargalg_kobject);
long int param;
int ac_usb;
int ret;
- char entry = *attr->name;
- switch (entry) {
- case 'c':
- ret = strict_strtol(buf, 10, &param);
- if (ret < 0)
- return ret;
-
- ac_usb = param;
- switch (ac_usb) {
- case 0:
- /* Disable charging */
- di->susp_status.ac_suspended = true;
- di->susp_status.usb_suspended = true;
- di->susp_status.suspended_change = true;
- /* Trigger a state change */
- queue_work(di->chargalg_wq,
- &di->chargalg_work);
- break;
- case 1:
- /* Enable AC Charging */
- di->susp_status.ac_suspended = false;
- di->susp_status.suspended_change = true;
- /* Trigger a state change */
- queue_work(di->chargalg_wq,
- &di->chargalg_work);
- break;
- case 2:
- /* Enable USB charging */
- di->susp_status.usb_suspended = false;
- di->susp_status.suspended_change = true;
- /* Trigger a state change */
- queue_work(di->chargalg_wq,
- &di->chargalg_work);
- break;
- default:
- dev_info(di->dev, "Wrong input\n"
- "Enter 0. Disable AC/USB Charging\n"
- "1. Enable AC charging\n"
- "2. Enable USB Charging\n");
- };
+ ret = kstrtol(buf, 10, &param);
+ if (ret < 0)
+ return ret;
+
+ ac_usb = param;
+ switch (ac_usb) {
+ case 0:
+ /* Disable charging */
+ di->susp_status.ac_suspended = true;
+ di->susp_status.usb_suspended = true;
+ di->susp_status.suspended_change = true;
+ /* Trigger a state change */
+ queue_work(di->chargalg_wq,
+ &di->chargalg_work);
+ break;
+ case 1:
+ /* Enable AC Charging */
+ di->susp_status.ac_suspended = false;
+ di->susp_status.suspended_change = true;
+ /* Trigger a state change */
+ queue_work(di->chargalg_wq,
+ &di->chargalg_work);
+ break;
+ case 2:
+ /* Enable USB charging */
+ di->susp_status.usb_suspended = false;
+ di->susp_status.suspended_change = true;
+ /* Trigger a state change */
+ queue_work(di->chargalg_wq,
+ &di->chargalg_work);
break;
+ default:
+ dev_info(di->dev, "Wrong input\n"
+ "Enter 0. Disable AC/USB Charging\n"
+ "1. Enable AC charging\n"
+ "2. Enable USB Charging\n");
};
return strlen(buf);
}
-static struct attribute abx500_chargalg_en_charger = \
+static struct abx500_chargalg_sysfs_entry abx500_chargalg_en_charger =
+ __ATTR(chargalg, 0644, abx500_chargalg_en_show,
+ abx500_chargalg_en_store);
+
+static struct abx500_chargalg_sysfs_entry abx500_chargalg_curr_step =
+ __ATTR(chargalg_curr_step, 0644, abx500_chargalg_curr_step_show,
+ abx500_chargalg_curr_step_store);
+
+static ssize_t abx500_chargalg_sysfs_show(struct kobject *kobj,
+ struct attribute *attr, char *buf)
{
- .name = "chargalg",
- .mode = S_IRUGO | S_IWUSR,
-};
+ struct abx500_chargalg_sysfs_entry *entry = container_of(attr,
+ struct abx500_chargalg_sysfs_entry, attr);
+
+ struct abx500_chargalg *di = container_of(kobj,
+ struct abx500_chargalg, chargalg_kobject);
+
+ if (!entry->show)
+ return -EIO;
+
+ return entry->show(di, buf);
+}
+
+static ssize_t abx500_chargalg_sysfs_charger(struct kobject *kobj,
+ struct attribute *attr, const char *buf, size_t length)
+{
+ struct abx500_chargalg_sysfs_entry *entry = container_of(attr,
+ struct abx500_chargalg_sysfs_entry, attr);
+
+ struct abx500_chargalg *di = container_of(kobj,
+ struct abx500_chargalg, chargalg_kobject);
+
+ if (!entry->store)
+ return -EIO;
+
+ return entry->store(di, buf, length);
+}
static struct attribute *abx500_chargalg_chg[] = {
- &abx500_chargalg_en_charger,
- NULL
+ &abx500_chargalg_en_charger.attr,
+ &abx500_chargalg_curr_step.attr,
+ NULL,
};
static const struct sysfs_ops abx500_chargalg_sysfs_ops = {
@@ -1832,10 +2024,16 @@ static int abx500_chargalg_remove(struct platform_device *pdev)
/* sysfs interface to enable/disbale charging from user space */
abx500_chargalg_sysfs_exit(di);
+ hrtimer_cancel(&di->safety_timer);
+ hrtimer_cancel(&di->maintenance_timer);
+
+ cancel_delayed_work_sync(&di->chargalg_periodic_work);
+ cancel_delayed_work_sync(&di->chargalg_wd_work);
+ cancel_work_sync(&di->chargalg_work);
+
/* Delete the work queue */
destroy_workqueue(di->chargalg_wq);
- flush_scheduled_work();
power_supply_unregister(&di->chargalg_psy);
platform_set_drvdata(pdev, NULL);
@@ -1873,8 +2071,9 @@ static int abx500_chargalg_probe(struct platform_device *pdev)
}
}
- /* get device struct */
+ /* get device struct and parent */
di->dev = &pdev->dev;
+ di->parent = dev_get_drvdata(pdev->dev.parent);
/* chargalg supply */
di->chargalg_psy.name = "abx500_chargalg";
@@ -1888,15 +2087,13 @@ static int abx500_chargalg_probe(struct platform_device *pdev)
abx500_chargalg_external_power_changed;
/* Initilialize safety timer */
- init_timer(&di->safety_timer);
+ hrtimer_init(&di->safety_timer, CLOCK_REALTIME, HRTIMER_MODE_ABS);
di->safety_timer.function = abx500_chargalg_safety_timer_expired;
- di->safety_timer.data = (unsigned long) di;
/* Initilialize maintenance timer */
- init_timer(&di->maintenance_timer);
+ hrtimer_init(&di->maintenance_timer, CLOCK_REALTIME, HRTIMER_MODE_ABS);
di->maintenance_timer.function =
abx500_chargalg_maintenance_timer_expired;
- di->maintenance_timer.data = (unsigned long) di;
/* Create a work queue for the chargalg */
di->chargalg_wq =
@@ -1933,6 +2130,7 @@ static int abx500_chargalg_probe(struct platform_device *pdev)
dev_err(di->dev, "failed to create sysfs entry\n");
goto free_psy;
}
+ di->curr_status.curr_step = CHARGALG_CURR_STEP_HIGH;
/* Run the charging algorithm */
queue_delayed_work(di->chargalg_wq, &di->chargalg_periodic_work, 0);
@@ -1964,18 +2162,7 @@ static struct platform_driver abx500_chargalg_driver = {
},
};
-static int __init abx500_chargalg_init(void)
-{
- return platform_driver_register(&abx500_chargalg_driver);
-}
-
-static void __exit abx500_chargalg_exit(void)
-{
- platform_driver_unregister(&abx500_chargalg_driver);
-}
-
-module_init(abx500_chargalg_init);
-module_exit(abx500_chargalg_exit);
+module_platform_driver(abx500_chargalg_driver);
MODULE_LICENSE("GPL v2");
MODULE_AUTHOR("Johan Palsson, Karl Komierowski");
diff --git a/drivers/power/charger-manager.c b/drivers/power/charger-manager.c
index 8acc3f8d303c..fefc39fe42be 100644
--- a/drivers/power/charger-manager.c
+++ b/drivers/power/charger-manager.c
@@ -1485,13 +1485,12 @@ static int charger_manager_probe(struct platform_device *pdev)
/* Basic Values. Unspecified are Null or 0 */
cm->dev = &pdev->dev;
- cm->desc = kzalloc(sizeof(struct charger_desc), GFP_KERNEL);
+ cm->desc = kmemdup(desc, sizeof(struct charger_desc), GFP_KERNEL);
if (!cm->desc) {
dev_err(&pdev->dev, "Cannot allocate memory.\n");
ret = -ENOMEM;
goto err_alloc_desc;
}
- memcpy(cm->desc, desc, sizeof(struct charger_desc));
cm->last_temp_mC = INT_MIN; /* denotes "unmeasured, yet" */
/*
diff --git a/drivers/power/da9030_battery.c b/drivers/power/da9030_battery.c
index e8c5a391a498..ae6c41835ee6 100644
--- a/drivers/power/da9030_battery.c
+++ b/drivers/power/da9030_battery.c
@@ -505,7 +505,7 @@ static int da9030_battery_probe(struct platform_device *pdev)
pdata->charge_millivolt > 4350)
return -EINVAL;
- charger = kzalloc(sizeof(*charger), GFP_KERNEL);
+ charger = devm_kzalloc(&pdev->dev, sizeof(*charger), GFP_KERNEL);
if (charger == NULL)
return -ENOMEM;
@@ -557,8 +557,6 @@ err_notifier:
cancel_delayed_work(&charger->work);
err_charger_init:
- kfree(charger);
-
return ret;
}
@@ -575,8 +573,6 @@ static int da9030_battery_remove(struct platform_device *dev)
da9030_set_charge(charger, 0);
power_supply_unregister(&charger->psy);
- kfree(charger);
-
return 0;
}
diff --git a/drivers/power/da9052-battery.c b/drivers/power/da9052-battery.c
index 08193feb3b08..f8f4c0f7c17d 100644
--- a/drivers/power/da9052-battery.c
+++ b/drivers/power/da9052-battery.c
@@ -594,7 +594,8 @@ static s32 da9052_bat_probe(struct platform_device *pdev)
int ret;
int i;
- bat = kzalloc(sizeof(struct da9052_battery), GFP_KERNEL);
+ bat = devm_kzalloc(&pdev->dev, sizeof(struct da9052_battery),
+ GFP_KERNEL);
if (!bat)
return -ENOMEM;
@@ -635,7 +636,6 @@ err:
while (--i >= 0)
da9052_free_irq(bat->da9052, da9052_bat_irq_bits[i], bat);
- kfree(bat);
return ret;
}
static int da9052_bat_remove(struct platform_device *pdev)
@@ -647,7 +647,6 @@ static int da9052_bat_remove(struct platform_device *pdev)
da9052_free_irq(bat->da9052, da9052_bat_irq_bits[i], bat);
power_supply_unregister(&bat->psy);
- kfree(bat);
return 0;
}
diff --git a/drivers/power/ds2760_battery.c b/drivers/power/ds2760_battery.c
index 704e652072be..85b4e6eca0b1 100644
--- a/drivers/power/ds2760_battery.c
+++ b/drivers/power/ds2760_battery.c
@@ -512,7 +512,7 @@ static int ds2760_battery_probe(struct platform_device *pdev)
int retval = 0;
struct ds2760_device_info *di;
- di = kzalloc(sizeof(*di), GFP_KERNEL);
+ di = devm_kzalloc(&pdev->dev, sizeof(*di), GFP_KERNEL);
if (!di) {
retval = -ENOMEM;
goto di_alloc_failed;
@@ -576,7 +576,6 @@ static int ds2760_battery_probe(struct platform_device *pdev)
workqueue_failed:
power_supply_unregister(&di->bat);
batt_failed:
- kfree(di);
di_alloc_failed:
success:
return retval;
@@ -590,7 +589,6 @@ static int ds2760_battery_remove(struct platform_device *pdev)
cancel_delayed_work_sync(&di->set_charged_work);
destroy_workqueue(di->monitor_wqueue);
power_supply_unregister(&di->bat);
- kfree(di);
return 0;
}
diff --git a/drivers/power/ds2780_battery.c b/drivers/power/ds2780_battery.c
index 8b6c4539e7f4..9f418fa879e5 100644
--- a/drivers/power/ds2780_battery.c
+++ b/drivers/power/ds2780_battery.c
@@ -760,7 +760,7 @@ static int ds2780_battery_probe(struct platform_device *pdev)
int ret = 0;
struct ds2780_device_info *dev_info;
- dev_info = kzalloc(sizeof(*dev_info), GFP_KERNEL);
+ dev_info = devm_kzalloc(&pdev->dev, sizeof(*dev_info), GFP_KERNEL);
if (!dev_info) {
ret = -ENOMEM;
goto fail;
@@ -779,7 +779,7 @@ static int ds2780_battery_probe(struct platform_device *pdev)
ret = power_supply_register(&pdev->dev, &dev_info->bat);
if (ret) {
dev_err(dev_info->dev, "failed to register battery\n");
- goto fail_free_info;
+ goto fail;
}
ret = sysfs_create_group(&dev_info->bat.dev->kobj, &ds2780_attr_group);
@@ -813,8 +813,6 @@ fail_remove_group:
sysfs_remove_group(&dev_info->bat.dev->kobj, &ds2780_attr_group);
fail_unregister:
power_supply_unregister(&dev_info->bat);
-fail_free_info:
- kfree(dev_info);
fail:
return ret;
}
@@ -828,7 +826,6 @@ static int ds2780_battery_remove(struct platform_device *pdev)
power_supply_unregister(&dev_info->bat);
- kfree(dev_info);
return 0;
}
diff --git a/drivers/power/ds2782_battery.c b/drivers/power/ds2782_battery.c
index c09e7726c96c..563174891c90 100644
--- a/drivers/power/ds2782_battery.c
+++ b/drivers/power/ds2782_battery.c
@@ -332,32 +332,32 @@ static int ds278x_battery_remove(struct i2c_client *client)
return 0;
}
-#ifdef CONFIG_PM
+#ifdef CONFIG_PM_SLEEP
-static int ds278x_suspend(struct i2c_client *client,
- pm_message_t state)
+static int ds278x_suspend(struct device *dev)
{
+ struct i2c_client *client = to_i2c_client(dev);
struct ds278x_info *info = i2c_get_clientdata(client);
cancel_delayed_work(&info->bat_work);
return 0;
}
-static int ds278x_resume(struct i2c_client *client)
+static int ds278x_resume(struct device *dev)
{
+ struct i2c_client *client = to_i2c_client(dev);
struct ds278x_info *info = i2c_get_clientdata(client);
schedule_delayed_work(&info->bat_work, DS278x_DELAY);
return 0;
}
-#else
-
-#define ds278x_suspend NULL
-#define ds278x_resume NULL
-
-#endif /* CONFIG_PM */
+static SIMPLE_DEV_PM_OPS(ds278x_battery_pm_ops, ds278x_suspend, ds278x_resume);
+#define DS278X_BATTERY_PM_OPS (&ds278x_battery_pm_ops)
+#else
+#define DS278X_BATTERY_PM_OPS NULL
+#endif /* CONFIG_PM_SLEEP */
enum ds278x_num_id {
DS2782 = 0,
@@ -460,11 +460,10 @@ MODULE_DEVICE_TABLE(i2c, ds278x_id);
static struct i2c_driver ds278x_battery_driver = {
.driver = {
.name = "ds2782-battery",
+ .pm = DS278X_BATTERY_PM_OPS,
},
.probe = ds278x_battery_probe,
.remove = ds278x_battery_remove,
- .suspend = ds278x_suspend,
- .resume = ds278x_resume,
.id_table = ds278x_id,
};
module_i2c_driver(ds278x_battery_driver);
diff --git a/drivers/power/goldfish_battery.c b/drivers/power/goldfish_battery.c
index c10f460f986f..29eba88a2963 100644
--- a/drivers/power/goldfish_battery.c
+++ b/drivers/power/goldfish_battery.c
@@ -178,7 +178,7 @@ static int goldfish_battery_probe(struct platform_device *pdev)
return -ENODEV;
}
- data->reg_base = devm_ioremap(&pdev->dev, r->start, r->end - r->start + 1);
+ data->reg_base = devm_ioremap(&pdev->dev, r->start, resource_size(r));
if (data->reg_base == NULL) {
dev_err(&pdev->dev, "unable to remap MMIO\n");
return -ENOMEM;
diff --git a/drivers/power/gpio-charger.c b/drivers/power/gpio-charger.c
index e3e40a9f3af2..e9883eeeee76 100644
--- a/drivers/power/gpio-charger.c
+++ b/drivers/power/gpio-charger.c
@@ -86,7 +86,8 @@ static int gpio_charger_probe(struct platform_device *pdev)
return -EINVAL;
}
- gpio_charger = kzalloc(sizeof(*gpio_charger), GFP_KERNEL);
+ gpio_charger = devm_kzalloc(&pdev->dev, sizeof(*gpio_charger),
+ GFP_KERNEL);
if (!gpio_charger) {
dev_err(&pdev->dev, "Failed to alloc driver structure\n");
return -ENOMEM;
@@ -140,7 +141,6 @@ static int gpio_charger_probe(struct platform_device *pdev)
err_gpio_free:
gpio_free(pdata->gpio);
err_free:
- kfree(gpio_charger);
return ret;
}
@@ -156,7 +156,6 @@ static int gpio_charger_remove(struct platform_device *pdev)
gpio_free(gpio_charger->pdata->gpio);
platform_set_drvdata(pdev, NULL);
- kfree(gpio_charger);
return 0;
}
diff --git a/drivers/power/isp1704_charger.c b/drivers/power/isp1704_charger.c
index 176ad59d99f5..fc04d191579b 100644
--- a/drivers/power/isp1704_charger.c
+++ b/drivers/power/isp1704_charger.c
@@ -411,7 +411,7 @@ static int isp1704_charger_probe(struct platform_device *pdev)
struct isp1704_charger *isp;
int ret = -ENODEV;
- isp = kzalloc(sizeof *isp, GFP_KERNEL);
+ isp = devm_kzalloc(&pdev->dev, sizeof(*isp), GFP_KERNEL);
if (!isp)
return -ENOMEM;
@@ -477,8 +477,6 @@ fail1:
isp1704_charger_set_power(isp, 0);
usb_put_phy(isp->phy);
fail0:
- kfree(isp);
-
dev_err(&pdev->dev, "failed to register isp1704 with error %d\n", ret);
return ret;
@@ -492,7 +490,6 @@ static int isp1704_charger_remove(struct platform_device *pdev)
power_supply_unregister(&isp->psy);
usb_put_phy(isp->phy);
isp1704_charger_set_power(isp, 0);
- kfree(isp);
return 0;
}
diff --git a/drivers/power/lp8788-charger.c b/drivers/power/lp8788-charger.c
index 6d1f452810b8..ed49b50b220b 100644
--- a/drivers/power/lp8788-charger.c
+++ b/drivers/power/lp8788-charger.c
@@ -49,7 +49,6 @@
#define LP8788_CHG_START 0x11
#define LP8788_CHG_END 0x1C
-#define LP8788_BUF_SIZE 40
#define LP8788_ISEL_MAX 23
#define LP8788_ISEL_STEP 50
#define LP8788_VTERM_MIN 4100
@@ -633,7 +632,7 @@ static ssize_t lp8788_show_charger_status(struct device *dev,
lp8788_read_byte(pchg->lp, LP8788_CHG_STATUS, &data);
state = (data & LP8788_CHG_STATE_M) >> LP8788_CHG_STATE_S;
- return scnprintf(buf, LP8788_BUF_SIZE, "%s\n", desc[state]);
+ return scnprintf(buf, PAGE_SIZE, "%s\n", desc[state]);
}
static ssize_t lp8788_show_eoc_time(struct device *dev,
@@ -647,7 +646,7 @@ static ssize_t lp8788_show_eoc_time(struct device *dev,
lp8788_read_byte(pchg->lp, LP8788_CHG_EOC, &val);
val = (val & LP8788_CHG_EOC_TIME_M) >> LP8788_CHG_EOC_TIME_S;
- return scnprintf(buf, LP8788_BUF_SIZE, "End Of Charge Time: %s\n",
+ return scnprintf(buf, PAGE_SIZE, "End Of Charge Time: %s\n",
stime[val]);
}
@@ -667,8 +666,7 @@ static ssize_t lp8788_show_eoc_level(struct device *dev,
val = (val & LP8788_CHG_EOC_LEVEL_M) >> LP8788_CHG_EOC_LEVEL_S;
level = mode ? abs_level[val] : relative_level[val];
- return scnprintf(buf, LP8788_BUF_SIZE, "End Of Charge Level: %s\n",
- level);
+ return scnprintf(buf, PAGE_SIZE, "End Of Charge Level: %s\n", level);
}
static DEVICE_ATTR(charger_status, S_IRUSR, lp8788_show_charger_status, NULL);
diff --git a/drivers/power/max17040_battery.c b/drivers/power/max17040_battery.c
index 74a0bd9bc162..c7ff6d67f158 100644
--- a/drivers/power/max17040_battery.c
+++ b/drivers/power/max17040_battery.c
@@ -246,31 +246,34 @@ static int max17040_remove(struct i2c_client *client)
return 0;
}
-#ifdef CONFIG_PM
+#ifdef CONFIG_PM_SLEEP
-static int max17040_suspend(struct i2c_client *client,
- pm_message_t state)
+static int max17040_suspend(struct device *dev)
{
+ struct i2c_client *client = to_i2c_client(dev);
struct max17040_chip *chip = i2c_get_clientdata(client);
cancel_delayed_work(&chip->work);
return 0;
}
-static int max17040_resume(struct i2c_client *client)
+static int max17040_resume(struct device *dev)
{
+ struct i2c_client *client = to_i2c_client(dev);
struct max17040_chip *chip = i2c_get_clientdata(client);
schedule_delayed_work(&chip->work, MAX17040_DELAY);
return 0;
}
+static SIMPLE_DEV_PM_OPS(max17040_pm_ops, max17040_suspend, max17040_resume);
+#define MAX17040_PM_OPS (&max17040_pm_ops)
+
#else
-#define max17040_suspend NULL
-#define max17040_resume NULL
+#define MAX17040_PM_OPS NULL
-#endif /* CONFIG_PM */
+#endif /* CONFIG_PM_SLEEP */
static const struct i2c_device_id max17040_id[] = {
{ "max17040", 0 },
@@ -281,11 +284,10 @@ MODULE_DEVICE_TABLE(i2c, max17040_id);
static struct i2c_driver max17040_i2c_driver = {
.driver = {
.name = "max17040",
+ .pm = MAX17040_PM_OPS,
},
.probe = max17040_probe,
.remove = max17040_remove,
- .suspend = max17040_suspend,
- .resume = max17040_resume,
.id_table = max17040_id,
};
module_i2c_driver(max17040_i2c_driver);
diff --git a/drivers/power/max8903_charger.c b/drivers/power/max8903_charger.c
index 14e2b96d93b0..08f0d7909b6b 100644
--- a/drivers/power/max8903_charger.c
+++ b/drivers/power/max8903_charger.c
@@ -189,7 +189,7 @@ static int max8903_probe(struct platform_device *pdev)
int ta_in = 0;
int usb_in = 0;
- data = kzalloc(sizeof(struct max8903_data), GFP_KERNEL);
+ data = devm_kzalloc(dev, sizeof(struct max8903_data), GFP_KERNEL);
if (data == NULL) {
dev_err(dev, "Cannot allocate memory.\n");
return -ENOMEM;
@@ -341,7 +341,6 @@ err_dc_irq:
err_psy:
power_supply_unregister(&data->psy);
err:
- kfree(data);
return ret;
}
@@ -359,7 +358,6 @@ static int max8903_remove(struct platform_device *pdev)
if (pdata->dc_valid)
free_irq(gpio_to_irq(pdata->dok), data);
power_supply_unregister(&data->psy);
- kfree(data);
}
return 0;
diff --git a/drivers/power/max8925_power.c b/drivers/power/max8925_power.c
index 665cdc76c265..0ee1e14f76e9 100644
--- a/drivers/power/max8925_power.c
+++ b/drivers/power/max8925_power.c
@@ -489,7 +489,8 @@ static int max8925_power_probe(struct platform_device *pdev)
return -EINVAL;
}
- info = kzalloc(sizeof(struct max8925_power_info), GFP_KERNEL);
+ info = devm_kzalloc(&pdev->dev, sizeof(struct max8925_power_info),
+ GFP_KERNEL);
if (!info)
return -ENOMEM;
info->chip = chip;
@@ -546,7 +547,6 @@ out_battery:
out_usb:
power_supply_unregister(&info->ac);
out:
- kfree(info);
return ret;
}
@@ -559,7 +559,6 @@ static int max8925_power_remove(struct platform_device *pdev)
power_supply_unregister(&info->usb);
power_supply_unregister(&info->battery);
max8925_deinit_charger(info);
- kfree(info);
}
return 0;
}
diff --git a/drivers/power/max8997_charger.c b/drivers/power/max8997_charger.c
index e757885b620c..4bdedfed936d 100644
--- a/drivers/power/max8997_charger.c
+++ b/drivers/power/max8997_charger.c
@@ -138,7 +138,8 @@ static int max8997_battery_probe(struct platform_device *pdev)
return ret;
}
- charger = kzalloc(sizeof(struct charger_data), GFP_KERNEL);
+ charger = devm_kzalloc(&pdev->dev, sizeof(struct charger_data),
+ GFP_KERNEL);
if (charger == NULL) {
dev_err(&pdev->dev, "Cannot allocate memory.\n");
return -ENOMEM;
@@ -158,13 +159,10 @@ static int max8997_battery_probe(struct platform_device *pdev)
ret = power_supply_register(&pdev->dev, &charger->battery);
if (ret) {
dev_err(&pdev->dev, "failed: power supply register\n");
- goto err;
+ return ret;
}
return 0;
-err:
- kfree(charger);
- return ret;
}
static int max8997_battery_remove(struct platform_device *pdev)
@@ -172,7 +170,6 @@ static int max8997_battery_remove(struct platform_device *pdev)
struct charger_data *charger = platform_get_drvdata(pdev);
power_supply_unregister(&charger->battery);
- kfree(charger);
return 0;
}
diff --git a/drivers/power/max8998_charger.c b/drivers/power/max8998_charger.c
index bf677e3daec9..5017470c2fc9 100644
--- a/drivers/power/max8998_charger.c
+++ b/drivers/power/max8998_charger.c
@@ -88,7 +88,8 @@ static int max8998_battery_probe(struct platform_device *pdev)
return -ENODEV;
}
- max8998 = kzalloc(sizeof(struct max8998_battery_data), GFP_KERNEL);
+ max8998 = devm_kzalloc(&pdev->dev, sizeof(struct max8998_battery_data),
+ GFP_KERNEL);
if (!max8998)
return -ENOMEM;
@@ -174,7 +175,6 @@ static int max8998_battery_probe(struct platform_device *pdev)
return 0;
err:
- kfree(max8998);
return ret;
}
@@ -183,7 +183,6 @@ static int max8998_battery_remove(struct platform_device *pdev)
struct max8998_battery_data *max8998 = platform_get_drvdata(pdev);
power_supply_unregister(&max8998->battery);
- kfree(max8998);
return 0;
}
diff --git a/drivers/power/pcf50633-charger.c b/drivers/power/pcf50633-charger.c
index c2122a7ad065..17fd77f24b2a 100644
--- a/drivers/power/pcf50633-charger.c
+++ b/drivers/power/pcf50633-charger.c
@@ -373,7 +373,7 @@ static int pcf50633_mbc_probe(struct platform_device *pdev)
int i;
u8 mbcs1;
- mbc = kzalloc(sizeof(*mbc), GFP_KERNEL);
+ mbc = devm_kzalloc(&pdev->dev, sizeof(*mbc), GFP_KERNEL);
if (!mbc)
return -ENOMEM;
@@ -413,7 +413,6 @@ static int pcf50633_mbc_probe(struct platform_device *pdev)
ret = power_supply_register(&pdev->dev, &mbc->adapter);
if (ret) {
dev_err(mbc->pcf->dev, "failed to register adapter\n");
- kfree(mbc);
return ret;
}
@@ -421,7 +420,6 @@ static int pcf50633_mbc_probe(struct platform_device *pdev)
if (ret) {
dev_err(mbc->pcf->dev, "failed to register usb\n");
power_supply_unregister(&mbc->adapter);
- kfree(mbc);
return ret;
}
@@ -430,7 +428,6 @@ static int pcf50633_mbc_probe(struct platform_device *pdev)
dev_err(mbc->pcf->dev, "failed to register ac\n");
power_supply_unregister(&mbc->adapter);
power_supply_unregister(&mbc->usb);
- kfree(mbc);
return ret;
}
@@ -461,8 +458,6 @@ static int pcf50633_mbc_remove(struct platform_device *pdev)
power_supply_unregister(&mbc->adapter);
power_supply_unregister(&mbc->ac);
- kfree(mbc);
-
return 0;
}
diff --git a/drivers/power/pm2301_charger.c b/drivers/power/pm2301_charger.c
index ee346d443571..a44175139bbf 100644
--- a/drivers/power/pm2301_charger.c
+++ b/drivers/power/pm2301_charger.c
@@ -16,24 +16,25 @@
#include <linux/slab.h>
#include <linux/platform_device.h>
#include <linux/power_supply.h>
-#include <linux/completion.h>
#include <linux/regulator/consumer.h>
#include <linux/err.h>
#include <linux/i2c.h>
#include <linux/workqueue.h>
-#include <linux/kobject.h>
-#include <linux/mfd/abx500.h>
#include <linux/mfd/abx500/ab8500.h>
#include <linux/mfd/abx500/ab8500-bm.h>
-#include <linux/mfd/abx500/ab8500-gpadc.h>
#include <linux/mfd/abx500/ux500_chargalg.h>
#include <linux/pm2301_charger.h>
#include <linux/gpio.h>
+#include <linux/pm_runtime.h>
+#include <linux/pm.h>
#include "pm2301_charger.h"
#define to_pm2xxx_charger_ac_device_info(x) container_of((x), \
struct pm2xxx_charger, ac_chg)
+#define SLEEP_MIN 50
+#define SLEEP_MAX 100
+#define PM2XXX_AUTOSUSPEND_DELAY 500
static int pm2xxx_interrupt_registers[] = {
PM2XXX_REG_INT1,
@@ -113,33 +114,24 @@ static const struct i2c_device_id pm2xxx_ident[] = {
static void set_lpn_pin(struct pm2xxx_charger *pm2)
{
- if (pm2->ac.charger_connected)
- return;
- gpio_set_value(pm2->lpn_pin, 1);
-
- return;
+ if (!pm2->ac.charger_connected && gpio_is_valid(pm2->lpn_pin)) {
+ gpio_set_value(pm2->lpn_pin, 1);
+ usleep_range(SLEEP_MIN, SLEEP_MAX);
+ }
}
static void clear_lpn_pin(struct pm2xxx_charger *pm2)
{
- if (pm2->ac.charger_connected)
- return;
- gpio_set_value(pm2->lpn_pin, 0);
-
- return;
+ if (!pm2->ac.charger_connected && gpio_is_valid(pm2->lpn_pin))
+ gpio_set_value(pm2->lpn_pin, 0);
}
static int pm2xxx_reg_read(struct pm2xxx_charger *pm2, int reg, u8 *val)
{
int ret;
- /*
- * When AC adaptor is unplugged, the host
- * must put LPN high to be able to
- * communicate by I2C with PM2301
- * and receive I2C "acknowledge" from PM2301.
- */
- mutex_lock(&pm2->lock);
- set_lpn_pin(pm2);
+
+ /* wake up the device */
+ pm_runtime_get_sync(pm2->dev);
ret = i2c_smbus_read_i2c_block_data(pm2->config.pm2xxx_i2c, reg,
1, val);
@@ -147,8 +139,8 @@ static int pm2xxx_reg_read(struct pm2xxx_charger *pm2, int reg, u8 *val)
dev_err(pm2->dev, "Error reading register at 0x%x\n", reg);
else
ret = 0;
- clear_lpn_pin(pm2);
- mutex_unlock(&pm2->lock);
+
+ pm_runtime_put_sync(pm2->dev);
return ret;
}
@@ -156,14 +148,9 @@ static int pm2xxx_reg_read(struct pm2xxx_charger *pm2, int reg, u8 *val)
static int pm2xxx_reg_write(struct pm2xxx_charger *pm2, int reg, u8 val)
{
int ret;
- /*
- * When AC adaptor is unplugged, the host
- * must put LPN high to be able to
- * communicate by I2C with PM2301
- * and receive I2C "acknowledge" from PM2301.
- */
- mutex_lock(&pm2->lock);
- set_lpn_pin(pm2);
+
+ /* wake up the device */
+ pm_runtime_get_sync(pm2->dev);
ret = i2c_smbus_write_i2c_block_data(pm2->config.pm2xxx_i2c, reg,
1, &val);
@@ -171,8 +158,8 @@ static int pm2xxx_reg_write(struct pm2xxx_charger *pm2, int reg, u8 val)
dev_err(pm2->dev, "Error writing register at 0x%x\n", reg);
else
ret = 0;
- clear_lpn_pin(pm2);
- mutex_unlock(&pm2->lock);
+
+ pm_runtime_put_sync(pm2->dev);
return ret;
}
@@ -192,11 +179,22 @@ static int pm2xxx_charging_disable_mngt(struct pm2xxx_charger *pm2)
{
int ret;
+ /* Disable SW EOC ctrl */
+ ret = pm2xxx_reg_write(pm2, PM2XXX_SW_CTRL_REG, PM2XXX_SWCTRL_HW);
+ if (ret < 0) {
+ dev_err(pm2->dev, "%s pm2xxx write failed\n", __func__);
+ return ret;
+ }
+
/* Disable charging */
ret = pm2xxx_reg_write(pm2, PM2XXX_BATT_CTRL_REG2,
(PM2XXX_CH_AUTO_RESUME_DIS | PM2XXX_CHARGER_DIS));
+ if (ret < 0) {
+ dev_err(pm2->dev, "%s pm2xxx write failed\n", __func__);
+ return ret;
+ }
- return ret;
+ return 0;
}
static int pm2xxx_charger_batt_therm_mngt(struct pm2xxx_charger *pm2, int val)
@@ -216,21 +214,14 @@ int pm2xxx_charger_die_therm_mngt(struct pm2xxx_charger *pm2, int val)
static int pm2xxx_charger_ovv_mngt(struct pm2xxx_charger *pm2, int val)
{
- int ret = 0;
+ dev_err(pm2->dev, "Overvoltage detected\n");
+ pm2->flags.ovv = true;
+ power_supply_changed(&pm2->ac_chg.psy);
- pm2->failure_input_ovv++;
- if (pm2->failure_input_ovv < 4) {
- ret = pm2xxx_charging_enable_mngt(pm2);
- goto out;
- } else {
- pm2->failure_input_ovv = 0;
- dev_err(pm2->dev, "Overvoltage detected\n");
- pm2->flags.ovv = true;
- power_supply_changed(&pm2->ac_chg.psy);
- }
+ /* Schedule a new HW failure check */
+ queue_delayed_work(pm2->charger_wq, &pm2->check_hw_failure_work, 0);
-out:
- return ret;
+ return 0;
}
static int pm2xxx_charger_wd_exp_mngt(struct pm2xxx_charger *pm2, int val)
@@ -245,13 +236,29 @@ static int pm2xxx_charger_wd_exp_mngt(struct pm2xxx_charger *pm2, int val)
static int pm2xxx_charger_vbat_lsig_mngt(struct pm2xxx_charger *pm2, int val)
{
+ int ret;
+
switch (val) {
case PM2XXX_INT1_ITVBATLOWR:
dev_dbg(pm2->dev, "VBAT grows above VBAT_LOW level\n");
+ /* Enable SW EOC ctrl */
+ ret = pm2xxx_reg_write(pm2, PM2XXX_SW_CTRL_REG,
+ PM2XXX_SWCTRL_SW);
+ if (ret < 0) {
+ dev_err(pm2->dev, "%s pm2xxx write failed\n", __func__);
+ return ret;
+ }
break;
case PM2XXX_INT1_ITVBATLOWF:
dev_dbg(pm2->dev, "VBAT drops below VBAT_LOW level\n");
+ /* Disable SW EOC ctrl */
+ ret = pm2xxx_reg_write(pm2, PM2XXX_SW_CTRL_REG,
+ PM2XXX_SWCTRL_HW);
+ if (ret < 0) {
+ dev_err(pm2->dev, "%s pm2xxx write failed\n", __func__);
+ return ret;
+ }
break;
default:
@@ -322,16 +329,27 @@ static int pm2_int_reg0(void *pm2_data, int val)
struct pm2xxx_charger *pm2 = pm2_data;
int ret = 0;
- if (val & (PM2XXX_INT1_ITVBATLOWR | PM2XXX_INT1_ITVBATLOWF)) {
- ret = pm2xxx_charger_vbat_lsig_mngt(pm2, val &
- (PM2XXX_INT1_ITVBATLOWR | PM2XXX_INT1_ITVBATLOWF));
+ if (val & PM2XXX_INT1_ITVBATLOWR) {
+ ret = pm2xxx_charger_vbat_lsig_mngt(pm2,
+ PM2XXX_INT1_ITVBATLOWR);
+ if (ret < 0)
+ goto out;
+ }
+
+ if (val & PM2XXX_INT1_ITVBATLOWF) {
+ ret = pm2xxx_charger_vbat_lsig_mngt(pm2,
+ PM2XXX_INT1_ITVBATLOWF);
+ if (ret < 0)
+ goto out;
}
if (val & PM2XXX_INT1_ITVBATDISCONNECT) {
ret = pm2xxx_charger_bat_disc_mngt(pm2,
PM2XXX_INT1_ITVBATDISCONNECT);
+ if (ret < 0)
+ goto out;
}
-
+out:
return ret;
}
@@ -447,7 +465,6 @@ static int pm2_int_reg5(void *pm2_data, int val)
struct pm2xxx_charger *pm2 = pm2_data;
int ret = 0;
-
if (val & (PM2XXX_INT6_ITVPWR2DROP | PM2XXX_INT6_ITVPWR1DROP)) {
dev_dbg(pm2->dev, "VMPWR drop to VBAT level\n");
}
@@ -468,14 +485,22 @@ static irqreturn_t pm2xxx_irq_int(int irq, void *data)
struct pm2xxx_interrupts *interrupt = pm2->pm2_int;
int i;
- for (i = 0; i < PM2XXX_NUM_INT_REG; i++) {
- pm2xxx_reg_read(pm2,
+ /* wake up the device */
+ pm_runtime_get_sync(pm2->dev);
+
+ do {
+ for (i = 0; i < PM2XXX_NUM_INT_REG; i++) {
+ pm2xxx_reg_read(pm2,
pm2xxx_interrupt_registers[i],
&(interrupt->reg[i]));
- if (interrupt->reg[i] > 0)
- interrupt->handler[i](pm2, interrupt->reg[i]);
- }
+ if (interrupt->reg[i] > 0)
+ interrupt->handler[i](pm2, interrupt->reg[i]);
+ }
+ } while (gpio_get_value(pm2->pdata->gpio_irq_number) == 0);
+
+ pm_runtime_mark_last_busy(pm2->dev);
+ pm_runtime_put_autosuspend(pm2->dev);
return IRQ_HANDLED;
}
@@ -592,6 +617,8 @@ static int pm2xxx_charger_ac_get_property(struct power_supply *psy,
val->intval = POWER_SUPPLY_HEALTH_DEAD;
else if (pm2->flags.main_thermal_prot)
val->intval = POWER_SUPPLY_HEALTH_OVERHEAT;
+ else if (pm2->flags.ovv)
+ val->intval = POWER_SUPPLY_HEALTH_OVERVOLTAGE;
else
val->intval = POWER_SUPPLY_HEALTH_GOOD;
break;
@@ -674,10 +701,6 @@ static int pm2xxx_charging_init(struct pm2xxx_charger *pm2)
ret = pm2xxx_reg_write(pm2, PM2XXX_BATT_LOW_LEV_COMP_REG,
PM2XXX_VBAT_LOW_MONITORING_ENA);
- /* Disable LED */
- ret = pm2xxx_reg_write(pm2, PM2XXX_LED_CTRL_REG,
- PM2XXX_LED_SELECT_DIS);
-
return ret;
}
@@ -822,10 +845,54 @@ static void pm2xxx_charger_ac_work(struct work_struct *work)
sysfs_notify(&pm2->ac_chg.psy.dev->kobj, NULL, "present");
};
+static void pm2xxx_charger_check_hw_failure_work(struct work_struct *work)
+{
+ u8 reg_value;
+
+ struct pm2xxx_charger *pm2 = container_of(work,
+ struct pm2xxx_charger, check_hw_failure_work.work);
+
+ if (pm2->flags.ovv) {
+ pm2xxx_reg_read(pm2, PM2XXX_SRCE_REG_INT4, &reg_value);
+
+ if (!(reg_value & (PM2XXX_INT4_S_ITVPWR1OVV |
+ PM2XXX_INT4_S_ITVPWR2OVV))) {
+ pm2->flags.ovv = false;
+ power_supply_changed(&pm2->ac_chg.psy);
+ }
+ }
+
+ /* If we still have a failure, schedule a new check */
+ if (pm2->flags.ovv) {
+ queue_delayed_work(pm2->charger_wq,
+ &pm2->check_hw_failure_work, round_jiffies(HZ));
+ }
+}
+
static void pm2xxx_charger_check_main_thermal_prot_work(
struct work_struct *work)
{
-};
+ int ret;
+ u8 val;
+
+ struct pm2xxx_charger *pm2 = container_of(work, struct pm2xxx_charger,
+ check_main_thermal_prot_work);
+
+ /* Check if die temp warning is still active */
+ ret = pm2xxx_reg_read(pm2, PM2XXX_SRCE_REG_INT5, &val);
+ if (ret < 0) {
+ dev_err(pm2->dev, "%s pm2xxx read failed\n", __func__);
+ return;
+ }
+ if (val & (PM2XXX_INT5_S_ITTHERMALWARNINGRISE
+ | PM2XXX_INT5_S_ITTHERMALSHUTDOWNRISE))
+ pm2->flags.main_thermal_prot = true;
+ else if (val & (PM2XXX_INT5_S_ITTHERMALWARNINGFALL
+ | PM2XXX_INT5_S_ITTHERMALSHUTDOWNFALL))
+ pm2->flags.main_thermal_prot = false;
+
+ power_supply_changed(&pm2->ac_chg.psy);
+}
static struct pm2xxx_interrupts pm2xxx_int = {
.handler[0] = pm2_int_reg0,
@@ -840,24 +907,105 @@ static struct pm2xxx_irq pm2xxx_charger_irq[] = {
{"PM2XXX_IRQ_INT", pm2xxx_irq_int},
};
-static int pm2xxx_wall_charger_resume(struct i2c_client *i2c_client)
+#ifdef CONFIG_PM
+
+#ifdef CONFIG_PM_SLEEP
+
+static int pm2xxx_wall_charger_resume(struct device *dev)
{
+ struct i2c_client *i2c_client = to_i2c_client(dev);
+ struct pm2xxx_charger *pm2;
+
+ pm2 = (struct pm2xxx_charger *)i2c_get_clientdata(i2c_client);
+ set_lpn_pin(pm2);
+
+ /* If we still have a HW failure, schedule a new check */
+ if (pm2->flags.ovv)
+ queue_delayed_work(pm2->charger_wq,
+ &pm2->check_hw_failure_work, 0);
+
return 0;
}
-static int pm2xxx_wall_charger_suspend(struct i2c_client *i2c_client,
- pm_message_t state)
+static int pm2xxx_wall_charger_suspend(struct device *dev)
{
+ struct i2c_client *i2c_client = to_i2c_client(dev);
+ struct pm2xxx_charger *pm2;
+
+ pm2 = (struct pm2xxx_charger *)i2c_get_clientdata(i2c_client);
+ clear_lpn_pin(pm2);
+
+ /* Cancel any pending HW failure check */
+ if (delayed_work_pending(&pm2->check_hw_failure_work))
+ cancel_delayed_work(&pm2->check_hw_failure_work);
+
+ flush_work(&pm2->ac_work);
+ flush_work(&pm2->check_main_thermal_prot_work);
+
return 0;
}
-static int __devinit pm2xxx_wall_charger_probe(struct i2c_client *i2c_client,
+#endif
+
+#ifdef CONFIG_PM_RUNTIME
+
+static int pm2xxx_runtime_suspend(struct device *dev)
+{
+ struct i2c_client *pm2xxx_i2c_client = to_i2c_client(dev);
+ struct pm2xxx_charger *pm2;
+ int ret = 0;
+
+ pm2 = (struct pm2xxx_charger *)i2c_get_clientdata(pm2xxx_i2c_client);
+ if (!pm2) {
+ dev_err(pm2->dev, "no pm2xxx_charger data supplied\n");
+ ret = -EINVAL;
+ return ret;
+ }
+
+ clear_lpn_pin(pm2);
+
+ return ret;
+}
+
+static int pm2xxx_runtime_resume(struct device *dev)
+{
+ struct i2c_client *pm2xxx_i2c_client = to_i2c_client(dev);
+ struct pm2xxx_charger *pm2;
+ int ret = 0;
+
+ pm2 = (struct pm2xxx_charger *)i2c_get_clientdata(pm2xxx_i2c_client);
+ if (!pm2) {
+ dev_err(pm2->dev, "no pm2xxx_charger data supplied\n");
+ ret = -EINVAL;
+ return ret;
+ }
+
+ if (gpio_is_valid(pm2->lpn_pin) && gpio_get_value(pm2->lpn_pin) == 0)
+ set_lpn_pin(pm2);
+
+ return ret;
+}
+
+#endif
+
+static const struct dev_pm_ops pm2xxx_pm_ops = {
+ SET_SYSTEM_SLEEP_PM_OPS(pm2xxx_wall_charger_suspend,
+ pm2xxx_wall_charger_resume)
+ SET_RUNTIME_PM_OPS(pm2xxx_runtime_suspend, pm2xxx_runtime_resume, NULL)
+};
+#define PM2XXX_PM_OPS (&pm2xxx_pm_ops)
+#else
+#define PM2XXX_PM_OPS NULL
+#endif
+
+static int pm2xxx_wall_charger_probe(struct i2c_client *i2c_client,
const struct i2c_device_id *id)
{
struct pm2xxx_platform_data *pl_data = i2c_client->dev.platform_data;
struct pm2xxx_charger *pm2;
int ret = 0;
u8 val;
+ int i;
pm2 = kzalloc(sizeof(struct pm2xxx_charger), GFP_KERNEL);
if (!pm2) {
@@ -867,7 +1015,6 @@ static int __devinit pm2xxx_wall_charger_probe(struct i2c_client *i2c_client,
/* get parent data */
pm2->dev = &i2c_client->dev;
- pm2->gpadc = ab8500_gpadc_get("ab8500-gpadc.0");
pm2->pm2_int = &pm2xxx_int;
@@ -889,14 +1036,6 @@ static int __devinit pm2xxx_wall_charger_probe(struct i2c_client *i2c_client,
pm2->bat = pl_data->battery;
- /*get lpn GPIO from platform data*/
- if (!pm2->pdata->lpn_gpio) {
- dev_err(pm2->dev, "no lpn gpio data supplied\n");
- ret = -EINVAL;
- goto free_device_info;
- }
- pm2->lpn_pin = pm2->pdata->lpn_gpio;
-
if (!i2c_check_functionality(i2c_client->adapter,
I2C_FUNC_SMBUS_BYTE_DATA |
I2C_FUNC_SMBUS_READ_WORD_DATA)) {
@@ -945,6 +1084,10 @@ static int __devinit pm2xxx_wall_charger_probe(struct i2c_client *i2c_client,
INIT_WORK(&pm2->check_main_thermal_prot_work,
pm2xxx_charger_check_main_thermal_prot_work);
+ /* Init work for HW failure check */
+ INIT_DEFERRABLE_WORK(&pm2->check_hw_failure_work,
+ pm2xxx_charger_check_hw_failure_work);
+
/*
* VDD ADC supply needs to be enabled from this driver when there
* is a charger connected to avoid erroneous BTEMP_HIGH/LOW
@@ -965,40 +1108,72 @@ static int __devinit pm2xxx_wall_charger_probe(struct i2c_client *i2c_client,
}
/* Register interrupts */
- ret = request_threaded_irq(pm2->pdata->irq_number, NULL,
+ ret = request_threaded_irq(gpio_to_irq(pm2->pdata->gpio_irq_number),
+ NULL,
pm2xxx_charger_irq[0].isr,
pm2->pdata->irq_type,
pm2xxx_charger_irq[0].name, pm2);
if (ret != 0) {
dev_err(pm2->dev, "failed to request %s IRQ %d: %d\n",
- pm2xxx_charger_irq[0].name, pm2->pdata->irq_number, ret);
+ pm2xxx_charger_irq[0].name,
+ gpio_to_irq(pm2->pdata->gpio_irq_number), ret);
goto unregister_pm2xxx_charger;
}
- /*Initialize lock*/
- mutex_init(&pm2->lock);
+ ret = pm_runtime_set_active(pm2->dev);
+ if (ret)
+ dev_err(pm2->dev, "set active Error\n");
- /*
- * Charger detection mechanism requires pulling up the LPN pin
- * while i2c communication if Charger is not connected
- * LPN pin of PM2301 is GPIO60 of AB9540
- */
- ret = gpio_request(pm2->lpn_pin, "pm2301_lpm_gpio");
- if (ret < 0) {
- dev_err(pm2->dev, "pm2301_lpm_gpio request failed\n");
- goto unregister_pm2xxx_charger;
+ pm_runtime_enable(pm2->dev);
+ pm_runtime_set_autosuspend_delay(pm2->dev, PM2XXX_AUTOSUSPEND_DELAY);
+ pm_runtime_use_autosuspend(pm2->dev);
+ pm_runtime_resume(pm2->dev);
+
+ /* pm interrupt can wake up system */
+ ret = enable_irq_wake(gpio_to_irq(pm2->pdata->gpio_irq_number));
+ if (ret) {
+ dev_err(pm2->dev, "failed to set irq wake\n");
+ goto unregister_pm2xxx_interrupt;
}
- ret = gpio_direction_output(pm2->lpn_pin, 0);
- if (ret < 0) {
- dev_err(pm2->dev, "pm2301_lpm_gpio direction failed\n");
- goto free_gpio;
+
+ mutex_init(&pm2->lock);
+
+ if (gpio_is_valid(pm2->pdata->lpn_gpio)) {
+ /* get lpn GPIO from platform data */
+ pm2->lpn_pin = pm2->pdata->lpn_gpio;
+
+ /*
+ * Charger detection mechanism requires pulling up the LPN pin
+ * while i2c communication if Charger is not connected
+ * LPN pin of PM2301 is GPIO60 of AB9540
+ */
+ ret = gpio_request(pm2->lpn_pin, "pm2301_lpm_gpio");
+
+ if (ret < 0) {
+ dev_err(pm2->dev, "pm2301_lpm_gpio request failed\n");
+ goto disable_pm2_irq_wake;
+ }
+ ret = gpio_direction_output(pm2->lpn_pin, 0);
+ if (ret < 0) {
+ dev_err(pm2->dev, "pm2301_lpm_gpio direction failed\n");
+ goto free_gpio;
+ }
+ set_lpn_pin(pm2);
}
+ /* read interrupt registers */
+ for (i = 0; i < PM2XXX_NUM_INT_REG; i++)
+ pm2xxx_reg_read(pm2,
+ pm2xxx_interrupt_registers[i],
+ &val);
+
ret = pm2xxx_charger_detection(pm2, &val);
if ((ret == 0) && val) {
pm2->ac.charger_connected = 1;
+ ab8500_override_turn_on_stat(~AB8500_POW_KEY_1_ON,
+ AB8500_MAIN_CH_DET);
pm2->ac_conn = true;
power_supply_changed(&pm2->ac_chg.psy);
sysfs_notify(&pm2->ac_chg.psy.dev->kobj, NULL, "present");
@@ -1007,7 +1182,13 @@ static int __devinit pm2xxx_wall_charger_probe(struct i2c_client *i2c_client,
return 0;
free_gpio:
- gpio_free(pm2->lpn_pin);
+ if (gpio_is_valid(pm2->lpn_pin))
+ gpio_free(pm2->lpn_pin);
+disable_pm2_irq_wake:
+ disable_irq_wake(gpio_to_irq(pm2->pdata->gpio_irq_number));
+unregister_pm2xxx_interrupt:
+ /* disable interrupt */
+ free_irq(gpio_to_irq(pm2->pdata->gpio_irq_number), pm2);
unregister_pm2xxx_charger:
/* unregister power supply */
power_supply_unregister(&pm2->ac_chg.psy);
@@ -1018,18 +1199,24 @@ free_charger_wq:
destroy_workqueue(pm2->charger_wq);
free_device_info:
kfree(pm2);
+
return ret;
}
-static int __devexit pm2xxx_wall_charger_remove(struct i2c_client *i2c_client)
+static int pm2xxx_wall_charger_remove(struct i2c_client *i2c_client)
{
struct pm2xxx_charger *pm2 = i2c_get_clientdata(i2c_client);
+ /* Disable pm_runtime */
+ pm_runtime_disable(pm2->dev);
/* Disable AC charging */
pm2xxx_charger_ac_en(&pm2->ac_chg, false, 0, 0);
+ /* Disable wake by pm interrupt */
+ disable_irq_wake(gpio_to_irq(pm2->pdata->gpio_irq_number));
+
/* Disable interrupts */
- free_irq(pm2->pdata->irq_number, pm2);
+ free_irq(gpio_to_irq(pm2->pdata->gpio_irq_number), pm2);
/* Delete the work queue */
destroy_workqueue(pm2->charger_wq);
@@ -1041,8 +1228,8 @@ static int __devexit pm2xxx_wall_charger_remove(struct i2c_client *i2c_client)
power_supply_unregister(&pm2->ac_chg.psy);
- /*Free GPIO60*/
- gpio_free(pm2->lpn_pin);
+ if (gpio_is_valid(pm2->lpn_pin))
+ gpio_free(pm2->lpn_pin);
kfree(pm2);
@@ -1058,12 +1245,11 @@ MODULE_DEVICE_TABLE(i2c, pm2xxx_id);
static struct i2c_driver pm2xxx_charger_driver = {
.probe = pm2xxx_wall_charger_probe,
- .remove = __devexit_p(pm2xxx_wall_charger_remove),
- .suspend = pm2xxx_wall_charger_suspend,
- .resume = pm2xxx_wall_charger_resume,
+ .remove = pm2xxx_wall_charger_remove,
.driver = {
.name = "pm2xxx-wall_charger",
.owner = THIS_MODULE,
+ .pm = PM2XXX_PM_OPS,
},
.id_table = pm2xxx_id,
};
@@ -1078,11 +1264,10 @@ static void __exit pm2xxx_charger_exit(void)
i2c_del_driver(&pm2xxx_charger_driver);
}
-subsys_initcall_sync(pm2xxx_charger_init);
+device_initcall_sync(pm2xxx_charger_init);
module_exit(pm2xxx_charger_exit);
MODULE_LICENSE("GPL v2");
MODULE_AUTHOR("Rajkumar kasirajan, Olivier Launay");
MODULE_ALIAS("platform:pm2xxx-charger");
MODULE_DESCRIPTION("PM2xxx charger management driver");
-
diff --git a/drivers/power/pm2301_charger.h b/drivers/power/pm2301_charger.h
index e6319cdbc94f..8ce3cc0195df 100644
--- a/drivers/power/pm2301_charger.h
+++ b/drivers/power/pm2301_charger.h
@@ -9,27 +9,6 @@
#ifndef PM2301_CHARGER_H
#define PM2301_CHARGER_H
-#define MAIN_WDOG_ENA 0x01
-#define MAIN_WDOG_KICK 0x02
-#define MAIN_WDOG_DIS 0x00
-#define CHARG_WD_KICK 0x01
-#define MAIN_CH_ENA 0x01
-#define MAIN_CH_NO_OVERSHOOT_ENA_N 0x02
-#define MAIN_CH_DET 0x01
-#define MAIN_CH_CV_ON 0x04
-#define OTP_ENABLE_WD 0x01
-
-#define MAIN_CH_INPUT_CURR_SHIFT 4
-
-#define LED_INDICATOR_PWM_ENA 0x01
-#define LED_INDICATOR_PWM_DIS 0x00
-#define LED_IND_CUR_5MA 0x04
-#define LED_INDICATOR_PWM_DUTY_252_256 0xBF
-
-/* HW failure constants */
-#define MAIN_CH_TH_PROT 0x02
-#define MAIN_CH_NOK 0x01
-
/* Watchdog timeout constant */
#define WD_TIMER 0x30 /* 4min */
#define WD_KICK_INTERVAL (30 * HZ)
@@ -495,7 +474,6 @@ struct pm2xxx_charger {
int failure_input_ovv;
unsigned int lpn_pin;
struct pm2xxx_interrupts *pm2_int;
- struct ab8500_gpadc *gpadc;
struct regulator *regu;
struct pm2xxx_bm_data *bat;
struct mutex lock;
@@ -506,6 +484,7 @@ struct pm2xxx_charger {
struct delayed_work check_vbat_work;
struct work_struct ac_work;
struct work_struct check_main_thermal_prot_work;
+ struct delayed_work check_hw_failure_work;
struct ux500_charger ac_chg;
struct pm2xxx_charger_event_flags flags;
};
diff --git a/drivers/power/power_supply_core.c b/drivers/power/power_supply_core.c
index 5deac432e2ae..1c517c34e4be 100644
--- a/drivers/power/power_supply_core.c
+++ b/drivers/power/power_supply_core.c
@@ -26,17 +26,42 @@ EXPORT_SYMBOL_GPL(power_supply_class);
static struct device_type power_supply_dev_type;
+static bool __power_supply_is_supplied_by(struct power_supply *supplier,
+ struct power_supply *supply)
+{
+ int i;
+
+ if (!supply->supplied_from && !supplier->supplied_to)
+ return false;
+
+ /* Support both supplied_to and supplied_from modes */
+ if (supply->supplied_from) {
+ if (!supplier->name)
+ return false;
+ for (i = 0; i < supply->num_supplies; i++)
+ if (!strcmp(supplier->name, supply->supplied_from[i]))
+ return true;
+ } else {
+ if (!supply->name)
+ return false;
+ for (i = 0; i < supplier->num_supplicants; i++)
+ if (!strcmp(supplier->supplied_to[i], supply->name))
+ return true;
+ }
+
+ return false;
+}
+
static int __power_supply_changed_work(struct device *dev, void *data)
{
struct power_supply *psy = (struct power_supply *)data;
struct power_supply *pst = dev_get_drvdata(dev);
- int i;
- for (i = 0; i < psy->num_supplicants; i++)
- if (!strcmp(psy->supplied_to[i], pst->name)) {
- if (pst->external_power_changed)
- pst->external_power_changed(pst);
- }
+ if (__power_supply_is_supplied_by(psy, pst)) {
+ if (pst->external_power_changed)
+ pst->external_power_changed(pst);
+ }
+
return 0;
}
@@ -63,22 +88,151 @@ void power_supply_changed(struct power_supply *psy)
}
EXPORT_SYMBOL_GPL(power_supply_changed);
+#ifdef CONFIG_OF
+#include <linux/of.h>
+
+static int __power_supply_populate_supplied_from(struct device *dev,
+ void *data)
+{
+ struct power_supply *psy = (struct power_supply *)data;
+ struct power_supply *epsy = dev_get_drvdata(dev);
+ struct device_node *np;
+ int i = 0;
+
+ do {
+ np = of_parse_phandle(psy->of_node, "power-supplies", i++);
+ if (!np)
+ continue;
+
+ if (np == epsy->of_node) {
+ dev_info(psy->dev, "%s: Found supply : %s\n",
+ psy->name, epsy->name);
+ psy->supplied_from[i-1] = (char *)epsy->name;
+ psy->num_supplies++;
+ break;
+ }
+ } while (np);
+
+ return 0;
+}
+
+static int power_supply_populate_supplied_from(struct power_supply *psy)
+{
+ int error;
+
+ error = class_for_each_device(power_supply_class, NULL, psy,
+ __power_supply_populate_supplied_from);
+
+ dev_dbg(psy->dev, "%s %d\n", __func__, error);
+
+ return error;
+}
+
+static int __power_supply_find_supply_from_node(struct device *dev,
+ void *data)
+{
+ struct device_node *np = (struct device_node *)data;
+ struct power_supply *epsy = dev_get_drvdata(dev);
+
+ /* return error breaks out of class_for_each_device loop */
+ if (epsy->of_node == np)
+ return -EINVAL;
+
+ return 0;
+}
+
+static int power_supply_find_supply_from_node(struct device_node *supply_node)
+{
+ int error;
+ struct device *dev;
+ struct class_dev_iter iter;
+
+ /*
+ * Use iterator to see if any other device is registered.
+ * This is required since class_for_each_device returns 0
+ * if there are no devices registered.
+ */
+ class_dev_iter_init(&iter, power_supply_class, NULL, NULL);
+ dev = class_dev_iter_next(&iter);
+
+ if (!dev)
+ return -EPROBE_DEFER;
+
+ /*
+ * We have to treat the return value as inverted, because if
+ * we return error on not found, then it won't continue looking.
+ * So we trick it by returning error on success to stop looking
+ * once the matching device is found.
+ */
+ error = class_for_each_device(power_supply_class, NULL, supply_node,
+ __power_supply_find_supply_from_node);
+
+ return error ? 0 : -EPROBE_DEFER;
+}
+
+static int power_supply_check_supplies(struct power_supply *psy)
+{
+ struct device_node *np;
+ int cnt = 0;
+
+ /* If there is already a list honor it */
+ if (psy->supplied_from && psy->num_supplies > 0)
+ return 0;
+
+ /* No device node found, nothing to do */
+ if (!psy->of_node)
+ return 0;
+
+ do {
+ int ret;
+
+ np = of_parse_phandle(psy->of_node, "power-supplies", cnt++);
+ if (!np)
+ continue;
+
+ ret = power_supply_find_supply_from_node(np);
+ if (ret) {
+ dev_dbg(psy->dev, "Failed to find supply, defer!\n");
+ return -EPROBE_DEFER;
+ }
+ } while (np);
+
+ /* All supplies found, allocate char ** array for filling */
+ psy->supplied_from = devm_kzalloc(psy->dev, sizeof(psy->supplied_from),
+ GFP_KERNEL);
+ if (!psy->supplied_from) {
+ dev_err(psy->dev, "Couldn't allocate memory for supply list\n");
+ return -ENOMEM;
+ }
+
+ *psy->supplied_from = devm_kzalloc(psy->dev, sizeof(char *) * cnt,
+ GFP_KERNEL);
+ if (!*psy->supplied_from) {
+ dev_err(psy->dev, "Couldn't allocate memory for supply list\n");
+ return -ENOMEM;
+ }
+
+ return power_supply_populate_supplied_from(psy);
+}
+#else
+static inline int power_supply_check_supplies(struct power_supply *psy)
+{
+ return 0;
+}
+#endif
+
static int __power_supply_am_i_supplied(struct device *dev, void *data)
{
union power_supply_propval ret = {0,};
struct power_supply *psy = (struct power_supply *)data;
struct power_supply *epsy = dev_get_drvdata(dev);
- int i;
- for (i = 0; i < epsy->num_supplicants; i++) {
- if (!strcmp(epsy->supplied_to[i], psy->name)) {
- if (epsy->get_property(epsy,
- POWER_SUPPLY_PROP_ONLINE, &ret))
- continue;
+ if (__power_supply_is_supplied_by(epsy, psy))
+ if (!epsy->get_property(epsy, POWER_SUPPLY_PROP_ONLINE, &ret)) {
if (ret.intval)
return ret.intval;
}
- }
+
return 0;
}
@@ -336,6 +490,12 @@ int power_supply_register(struct device *parent, struct power_supply *psy)
INIT_WORK(&psy->changed_work, power_supply_changed_work);
+ rc = power_supply_check_supplies(psy);
+ if (rc) {
+ dev_info(dev, "Not all required supplies found, defer probe\n");
+ goto check_supplies_failed;
+ }
+
rc = kobject_set_name(&dev->kobj, "%s", psy->name);
if (rc)
goto kobject_set_name_failed;
@@ -368,6 +528,7 @@ register_thermal_failed:
device_del(dev);
kobject_set_name_failed:
device_add_failed:
+check_supplies_failed:
put_device(dev);
success:
return rc;
diff --git a/drivers/power/reset/Kconfig b/drivers/power/reset/Kconfig
index 1ae65b822864..349e9ae8090a 100644
--- a/drivers/power/reset/Kconfig
+++ b/drivers/power/reset/Kconfig
@@ -30,3 +30,10 @@ config POWER_RESET_RESTART
Some boards don't actually have the ability to power off.
Instead they restart, and u-boot holds the SoC until the
user presses a key. u-boot then boots into Linux.
+
+config POWER_RESET_VEXPRESS
+ bool
+ depends on POWER_RESET
+ help
+ Power off and reset support for the ARM Ltd. Versatile
+ Express boards.
diff --git a/drivers/power/reset/Makefile b/drivers/power/reset/Makefile
index 0f317f50c56f..372807fd83f7 100644
--- a/drivers/power/reset/Makefile
+++ b/drivers/power/reset/Makefile
@@ -1,3 +1,4 @@
obj-$(CONFIG_POWER_RESET_GPIO) += gpio-poweroff.o
obj-$(CONFIG_POWER_RESET_QNAP) += qnap-poweroff.o
-obj-$(CONFIG_POWER_RESET_RESTART) += restart-poweroff.o \ No newline at end of file
+obj-$(CONFIG_POWER_RESET_RESTART) += restart-poweroff.o
+obj-$(CONFIG_POWER_RESET_VEXPRESS) += vexpress-poweroff.o
diff --git a/drivers/power/reset/vexpress-poweroff.c b/drivers/power/reset/vexpress-poweroff.c
new file mode 100644
index 000000000000..469e6962b2cf
--- /dev/null
+++ b/drivers/power/reset/vexpress-poweroff.c
@@ -0,0 +1,146 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Copyright (C) 2012 ARM Limited
+ */
+
+#include <linux/jiffies.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/stat.h>
+#include <linux/vexpress.h>
+
+#include <asm/system_misc.h>
+
+static void vexpress_reset_do(struct device *dev, const char *what)
+{
+ int err = -ENOENT;
+ struct vexpress_config_func *func =
+ vexpress_config_func_get_by_dev(dev);
+
+ if (func) {
+ unsigned long timeout;
+
+ err = vexpress_config_write(func, 0, 0);
+
+ timeout = jiffies + HZ;
+ while (time_before(jiffies, timeout))
+ cpu_relax();
+ }
+
+ dev_emerg(dev, "Unable to %s (%d)\n", what, err);
+}
+
+static struct device *vexpress_power_off_device;
+
+static void vexpress_power_off(void)
+{
+ vexpress_reset_do(vexpress_power_off_device, "power off");
+}
+
+static struct device *vexpress_restart_device;
+
+static void vexpress_restart(char str, const char *cmd)
+{
+ vexpress_reset_do(vexpress_restart_device, "restart");
+}
+
+static ssize_t vexpress_reset_active_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ return sprintf(buf, "%d\n", vexpress_restart_device == dev);
+}
+
+static ssize_t vexpress_reset_active_store(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t count)
+{
+ long value;
+ int err = kstrtol(buf, 0, &value);
+
+ if (!err && value)
+ vexpress_restart_device = dev;
+
+ return err ? err : count;
+}
+
+DEVICE_ATTR(active, S_IRUGO | S_IWUSR, vexpress_reset_active_show,
+ vexpress_reset_active_store);
+
+
+enum vexpress_reset_func { FUNC_RESET, FUNC_SHUTDOWN, FUNC_REBOOT };
+
+static struct of_device_id vexpress_reset_of_match[] = {
+ {
+ .compatible = "arm,vexpress-reset",
+ .data = (void *)FUNC_RESET,
+ }, {
+ .compatible = "arm,vexpress-shutdown",
+ .data = (void *)FUNC_SHUTDOWN
+ }, {
+ .compatible = "arm,vexpress-reboot",
+ .data = (void *)FUNC_REBOOT
+ },
+ {}
+};
+
+static int vexpress_reset_probe(struct platform_device *pdev)
+{
+ enum vexpress_reset_func func;
+ const struct of_device_id *match =
+ of_match_device(vexpress_reset_of_match, &pdev->dev);
+
+ if (match)
+ func = (enum vexpress_reset_func)match->data;
+ else
+ func = pdev->id_entry->driver_data;
+
+ switch (func) {
+ case FUNC_SHUTDOWN:
+ vexpress_power_off_device = &pdev->dev;
+ pm_power_off = vexpress_power_off;
+ break;
+ case FUNC_RESET:
+ if (!vexpress_restart_device)
+ vexpress_restart_device = &pdev->dev;
+ arm_pm_restart = vexpress_restart;
+ device_create_file(&pdev->dev, &dev_attr_active);
+ break;
+ case FUNC_REBOOT:
+ vexpress_restart_device = &pdev->dev;
+ arm_pm_restart = vexpress_restart;
+ device_create_file(&pdev->dev, &dev_attr_active);
+ break;
+ };
+
+ return 0;
+}
+
+static const struct platform_device_id vexpress_reset_id_table[] = {
+ { .name = "vexpress-reset", .driver_data = FUNC_RESET, },
+ { .name = "vexpress-shutdown", .driver_data = FUNC_SHUTDOWN, },
+ { .name = "vexpress-reboot", .driver_data = FUNC_REBOOT, },
+ {}
+};
+
+static struct platform_driver vexpress_reset_driver = {
+ .probe = vexpress_reset_probe,
+ .driver = {
+ .name = "vexpress-reset",
+ .of_match_table = vexpress_reset_of_match,
+ },
+ .id_table = vexpress_reset_id_table,
+};
+
+static int __init vexpress_reset_init(void)
+{
+ return platform_driver_register(&vexpress_reset_driver);
+}
+device_initcall(vexpress_reset_init);
diff --git a/drivers/power/rx51_battery.c b/drivers/power/rx51_battery.c
index 8208888b844e..1a1dcb831a17 100644
--- a/drivers/power/rx51_battery.c
+++ b/drivers/power/rx51_battery.c
@@ -119,7 +119,7 @@ static int rx51_battery_read_temperature(struct rx51_device_info *di)
/* First check for temperature in first direct table */
if (raw < ARRAY_SIZE(rx51_temp_table1))
- return rx51_temp_table1[raw] * 100;
+ return rx51_temp_table1[raw] * 10;
/* Binary search RAW value in second inverse table */
while (max - min > 1) {
@@ -132,7 +132,7 @@ static int rx51_battery_read_temperature(struct rx51_device_info *di)
break;
}
- return (rx51_temp_table2_first - min) * 100;
+ return (rx51_temp_table2_first - min) * 10;
}
/*
@@ -202,7 +202,7 @@ static int rx51_battery_probe(struct platform_device *pdev)
struct rx51_device_info *di;
int ret;
- di = kzalloc(sizeof(*di), GFP_KERNEL);
+ di = devm_kzalloc(&pdev->dev, sizeof(*di), GFP_KERNEL);
if (!di)
return -ENOMEM;
@@ -217,7 +217,6 @@ static int rx51_battery_probe(struct platform_device *pdev)
ret = power_supply_register(di->dev, &di->bat);
if (ret) {
platform_set_drvdata(pdev, NULL);
- kfree(di);
return ret;
}
@@ -230,7 +229,6 @@ static int rx51_battery_remove(struct platform_device *pdev)
power_supply_unregister(&di->bat);
platform_set_drvdata(pdev, NULL);
- kfree(di);
return 0;
}
diff --git a/drivers/power/s3c_adc_battery.c b/drivers/power/s3c_adc_battery.c
index d2ca989dcbdc..5948ce058bdd 100644
--- a/drivers/power/s3c_adc_battery.c
+++ b/drivers/power/s3c_adc_battery.c
@@ -145,14 +145,17 @@ static int s3c_adc_bat_get_property(struct power_supply *psy,
int new_level;
int full_volt;
- const struct s3c_adc_bat_thresh *lut = bat->pdata->lut_noac;
- unsigned int lut_size = bat->pdata->lut_noac_cnt;
+ const struct s3c_adc_bat_thresh *lut;
+ unsigned int lut_size;
if (!bat) {
dev_err(psy->dev, "no battery infos ?!\n");
return -EINVAL;
}
+ lut = bat->pdata->lut_noac;
+ lut_size = bat->pdata->lut_noac_cnt;
+
if (bat->volt_value < 0 || bat->cur_value < 0 ||
jiffies_to_msecs(jiffies - bat->timestamp) >
BAT_POLL_INTERVAL) {
diff --git a/drivers/power/sbs-battery.c b/drivers/power/sbs-battery.c
index 3960f0b2afe9..c8c78a74e75a 100644
--- a/drivers/power/sbs-battery.c
+++ b/drivers/power/sbs-battery.c
@@ -27,6 +27,7 @@
#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/gpio.h>
+#include <linux/of.h>
#include <linux/power/sbs-battery.h>
@@ -667,7 +668,6 @@ of_out:
return pdata;
}
#else
-#define sbs_dt_ids NULL
static struct sbs_platform_data *sbs_of_populate_pdata(
struct i2c_client *client)
{
@@ -820,10 +820,11 @@ static int sbs_remove(struct i2c_client *client)
return 0;
}
-#if defined CONFIG_PM
-static int sbs_suspend(struct i2c_client *client,
- pm_message_t state)
+#if defined CONFIG_PM_SLEEP
+
+static int sbs_suspend(struct device *dev)
{
+ struct i2c_client *client = to_i2c_client(dev);
struct sbs_info *chip = i2c_get_clientdata(client);
s32 ret;
@@ -838,11 +839,13 @@ static int sbs_suspend(struct i2c_client *client,
return 0;
}
+
+static SIMPLE_DEV_PM_OPS(sbs_pm_ops, sbs_suspend, NULL);
+#define SBS_PM_OPS (&sbs_pm_ops)
+
#else
-#define sbs_suspend NULL
+#define SBS_PM_OPS NULL
#endif
-/* any smbus transaction will wake up sbs */
-#define sbs_resume NULL
static const struct i2c_device_id sbs_id[] = {
{ "bq20z75", 0 },
@@ -854,12 +857,11 @@ MODULE_DEVICE_TABLE(i2c, sbs_id);
static struct i2c_driver sbs_battery_driver = {
.probe = sbs_probe,
.remove = sbs_remove,
- .suspend = sbs_suspend,
- .resume = sbs_resume,
.id_table = sbs_id,
.driver = {
.name = "sbs-battery",
- .of_match_table = sbs_dt_ids,
+ .of_match_table = of_match_ptr(sbs_dt_ids),
+ .pm = SBS_PM_OPS,
},
};
module_i2c_driver(sbs_battery_driver);
diff --git a/drivers/power/test_power.c b/drivers/power/test_power.c
index b99a452a4fda..0152f35dca5c 100644
--- a/drivers/power/test_power.c
+++ b/drivers/power/test_power.c
@@ -30,6 +30,8 @@ static int battery_technology = POWER_SUPPLY_TECHNOLOGY_LION;
static int battery_capacity = 50;
static int battery_voltage = 3300;
+static bool module_initialized;
+
static int test_power_get_ac_property(struct power_supply *psy,
enum power_supply_property psp,
union power_supply_propval *val)
@@ -185,6 +187,7 @@ static int __init test_power_init(void)
}
}
+ module_initialized = true;
return 0;
failed:
while (--i >= 0)
@@ -209,6 +212,8 @@ static void __exit test_power_exit(void)
for (i = 0; i < ARRAY_SIZE(test_power_supplies); i++)
power_supply_unregister(&test_power_supplies[i]);
+
+ module_initialized = false;
}
module_exit(test_power_exit);
@@ -221,8 +226,8 @@ struct battery_property_map {
};
static struct battery_property_map map_ac_online[] = {
- { 0, "on" },
- { 1, "off" },
+ { 0, "off" },
+ { 1, "on" },
{ -1, NULL },
};
@@ -295,10 +300,16 @@ static const char *map_get_key(struct battery_property_map *map, int value,
return def_key;
}
+static inline void signal_power_supply_changed(struct power_supply *psy)
+{
+ if (module_initialized)
+ power_supply_changed(psy);
+}
+
static int param_set_ac_online(const char *key, const struct kernel_param *kp)
{
ac_online = map_get_value(map_ac_online, key, ac_online);
- power_supply_changed(&test_power_supplies[0]);
+ signal_power_supply_changed(&test_power_supplies[0]);
return 0;
}
@@ -311,7 +322,7 @@ static int param_get_ac_online(char *buffer, const struct kernel_param *kp)
static int param_set_usb_online(const char *key, const struct kernel_param *kp)
{
usb_online = map_get_value(map_ac_online, key, usb_online);
- power_supply_changed(&test_power_supplies[2]);
+ signal_power_supply_changed(&test_power_supplies[2]);
return 0;
}
@@ -325,7 +336,7 @@ static int param_set_battery_status(const char *key,
const struct kernel_param *kp)
{
battery_status = map_get_value(map_status, key, battery_status);
- power_supply_changed(&test_power_supplies[1]);
+ signal_power_supply_changed(&test_power_supplies[1]);
return 0;
}
@@ -339,7 +350,7 @@ static int param_set_battery_health(const char *key,
const struct kernel_param *kp)
{
battery_health = map_get_value(map_health, key, battery_health);
- power_supply_changed(&test_power_supplies[1]);
+ signal_power_supply_changed(&test_power_supplies[1]);
return 0;
}
@@ -353,7 +364,7 @@ static int param_set_battery_present(const char *key,
const struct kernel_param *kp)
{
battery_present = map_get_value(map_present, key, battery_present);
- power_supply_changed(&test_power_supplies[0]);
+ signal_power_supply_changed(&test_power_supplies[0]);
return 0;
}
@@ -369,7 +380,7 @@ static int param_set_battery_technology(const char *key,
{
battery_technology = map_get_value(map_technology, key,
battery_technology);
- power_supply_changed(&test_power_supplies[1]);
+ signal_power_supply_changed(&test_power_supplies[1]);
return 0;
}
@@ -390,7 +401,7 @@ static int param_set_battery_capacity(const char *key,
return -EINVAL;
battery_capacity = tmp;
- power_supply_changed(&test_power_supplies[1]);
+ signal_power_supply_changed(&test_power_supplies[1]);
return 0;
}
@@ -405,7 +416,7 @@ static int param_set_battery_voltage(const char *key,
return -EINVAL;
battery_voltage = tmp;
- power_supply_changed(&test_power_supplies[1]);
+ signal_power_supply_changed(&test_power_supplies[1]);
return 0;
}
diff --git a/drivers/power/tps65090-charger.c b/drivers/power/tps65090-charger.c
new file mode 100644
index 000000000000..9fbca310a2ad
--- /dev/null
+++ b/drivers/power/tps65090-charger.c
@@ -0,0 +1,320 @@
+/*
+ * Battery charger driver for TI's tps65090
+ *
+ * Copyright (c) 2013, NVIDIA CORPORATION. All rights reserved.
+
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/power_supply.h>
+#include <linux/mfd/tps65090.h>
+
+#define TPS65090_REG_INTR_STS 0x00
+#define TPS65090_REG_CG_CTRL0 0x04
+#define TPS65090_REG_CG_CTRL1 0x05
+#define TPS65090_REG_CG_CTRL2 0x06
+#define TPS65090_REG_CG_CTRL3 0x07
+#define TPS65090_REG_CG_CTRL4 0x08
+#define TPS65090_REG_CG_CTRL5 0x09
+#define TPS65090_REG_CG_STATUS1 0x0a
+#define TPS65090_REG_CG_STATUS2 0x0b
+
+#define TPS65090_CHARGER_ENABLE BIT(0)
+#define TPS65090_VACG BIT(1)
+#define TPS65090_NOITERM BIT(5)
+
+struct tps65090_charger {
+ struct device *dev;
+ int ac_online;
+ int prev_ac_online;
+ int irq;
+ struct power_supply ac;
+ struct tps65090_platform_data *pdata;
+};
+
+static enum power_supply_property tps65090_ac_props[] = {
+ POWER_SUPPLY_PROP_ONLINE,
+};
+
+static int tps65090_low_chrg_current(struct tps65090_charger *charger)
+{
+ int ret;
+
+ ret = tps65090_write(charger->dev->parent, TPS65090_REG_CG_CTRL5,
+ TPS65090_NOITERM);
+ if (ret < 0) {
+ dev_err(charger->dev, "%s(): error reading in register 0x%x\n",
+ __func__, TPS65090_REG_CG_CTRL5);
+ return ret;
+ }
+ return 0;
+}
+
+static int tps65090_enable_charging(struct tps65090_charger *charger,
+ uint8_t enable)
+{
+ int ret;
+ uint8_t ctrl0 = 0;
+
+ ret = tps65090_read(charger->dev->parent, TPS65090_REG_CG_CTRL0,
+ &ctrl0);
+ if (ret < 0) {
+ dev_err(charger->dev, "%s(): error reading in register 0x%x\n",
+ __func__, TPS65090_REG_CG_CTRL0);
+ return ret;
+ }
+
+ ret = tps65090_write(charger->dev->parent, TPS65090_REG_CG_CTRL0,
+ (ctrl0 | TPS65090_CHARGER_ENABLE));
+ if (ret < 0) {
+ dev_err(charger->dev, "%s(): error reading in register 0x%x\n",
+ __func__, TPS65090_REG_CG_CTRL0);
+ return ret;
+ }
+ return 0;
+}
+
+static int tps65090_config_charger(struct tps65090_charger *charger)
+{
+ int ret;
+
+ if (charger->pdata->enable_low_current_chrg) {
+ ret = tps65090_low_chrg_current(charger);
+ if (ret < 0) {
+ dev_err(charger->dev,
+ "error configuring low charge current\n");
+ return ret;
+ }
+ }
+
+ return 0;
+}
+
+static int tps65090_ac_get_property(struct power_supply *psy,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ struct tps65090_charger *charger = container_of(psy,
+ struct tps65090_charger, ac);
+
+ if (psp == POWER_SUPPLY_PROP_ONLINE) {
+ val->intval = charger->ac_online;
+ charger->prev_ac_online = charger->ac_online;
+ return 0;
+ }
+ return -EINVAL;
+}
+
+static irqreturn_t tps65090_charger_isr(int irq, void *dev_id)
+{
+ struct tps65090_charger *charger = dev_id;
+ int ret;
+ uint8_t status1 = 0;
+ uint8_t intrsts = 0;
+
+ ret = tps65090_read(charger->dev->parent, TPS65090_REG_CG_STATUS1,
+ &status1);
+ if (ret < 0) {
+ dev_err(charger->dev, "%s(): Error in reading reg 0x%x\n",
+ __func__, TPS65090_REG_CG_STATUS1);
+ return IRQ_HANDLED;
+ }
+ msleep(75);
+ ret = tps65090_read(charger->dev->parent, TPS65090_REG_INTR_STS,
+ &intrsts);
+ if (ret < 0) {
+ dev_err(charger->dev, "%s(): Error in reading reg 0x%x\n",
+ __func__, TPS65090_REG_INTR_STS);
+ return IRQ_HANDLED;
+ }
+
+ if (intrsts & TPS65090_VACG) {
+ ret = tps65090_enable_charging(charger, 1);
+ if (ret < 0)
+ return IRQ_HANDLED;
+ charger->ac_online = 1;
+ } else {
+ charger->ac_online = 0;
+ }
+
+ if (charger->prev_ac_online != charger->ac_online)
+ power_supply_changed(&charger->ac);
+
+ return IRQ_HANDLED;
+}
+
+#if defined(CONFIG_OF)
+
+#include <linux/of_device.h>
+
+static struct tps65090_platform_data *
+ tps65090_parse_dt_charger_data(struct platform_device *pdev)
+{
+ struct tps65090_platform_data *pdata;
+ struct device_node *np = pdev->dev.of_node;
+ unsigned int prop;
+
+ pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
+ if (!pdata) {
+ dev_err(&pdev->dev, "Memory alloc for tps65090_pdata failed\n");
+ return NULL;
+ }
+
+ prop = of_property_read_bool(np, "ti,enable-low-current-chrg");
+ pdata->enable_low_current_chrg = prop;
+
+ pdata->irq_base = -1;
+
+ return pdata;
+
+}
+#else
+static struct tps65090_platform_data *
+ tps65090_parse_dt_charger_data(struct platform_device *pdev)
+{
+ return NULL;
+}
+#endif
+
+static int tps65090_charger_probe(struct platform_device *pdev)
+{
+ struct tps65090_charger *cdata;
+ struct tps65090_platform_data *pdata;
+ uint8_t status1 = 0;
+ int ret;
+ int irq;
+
+ pdata = dev_get_platdata(pdev->dev.parent);
+
+ if (!pdata && pdev->dev.of_node)
+ pdata = tps65090_parse_dt_charger_data(pdev);
+
+ if (!pdata) {
+ dev_err(&pdev->dev, "%s():no platform data available\n",
+ __func__);
+ return -ENODEV;
+ }
+
+ cdata = devm_kzalloc(&pdev->dev, sizeof(*cdata), GFP_KERNEL);
+ if (!cdata) {
+ dev_err(&pdev->dev, "failed to allocate memory status\n");
+ return -ENOMEM;
+ }
+
+ dev_set_drvdata(&pdev->dev, cdata);
+
+ cdata->dev = &pdev->dev;
+ cdata->pdata = pdata;
+
+ cdata->ac.name = "tps65090-ac";
+ cdata->ac.type = POWER_SUPPLY_TYPE_MAINS;
+ cdata->ac.get_property = tps65090_ac_get_property;
+ cdata->ac.properties = tps65090_ac_props;
+ cdata->ac.num_properties = ARRAY_SIZE(tps65090_ac_props);
+ cdata->ac.supplied_to = pdata->supplied_to;
+ cdata->ac.num_supplicants = pdata->num_supplicants;
+
+ ret = power_supply_register(&pdev->dev, &cdata->ac);
+ if (ret) {
+ dev_err(&pdev->dev, "failed: power supply register\n");
+ return ret;
+ }
+
+ irq = platform_get_irq(pdev, 0);
+ if (irq <= 0) {
+ dev_warn(&pdev->dev, "Unable to get charger irq = %d\n", irq);
+ ret = irq;
+ goto fail_unregister_supply;
+ }
+
+ cdata->irq = irq;
+
+ ret = devm_request_threaded_irq(&pdev->dev, irq, NULL,
+ tps65090_charger_isr, 0, "tps65090-charger", cdata);
+ if (ret) {
+ dev_err(cdata->dev, "Unable to register irq %d err %d\n", irq,
+ ret);
+ goto fail_free_irq;
+ }
+
+ ret = tps65090_config_charger(cdata);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "charger config failed, err %d\n", ret);
+ goto fail_free_irq;
+ }
+
+ /* Check for charger presence */
+ ret = tps65090_read(cdata->dev->parent, TPS65090_REG_CG_STATUS1,
+ &status1);
+ if (ret < 0) {
+ dev_err(cdata->dev, "%s(): Error in reading reg 0x%x", __func__,
+ TPS65090_REG_CG_STATUS1);
+ goto fail_free_irq;
+ }
+
+ if (status1 != 0) {
+ ret = tps65090_enable_charging(cdata, 1);
+ if (ret < 0) {
+ dev_err(cdata->dev, "error enabling charger\n");
+ goto fail_free_irq;
+ }
+ cdata->ac_online = 1;
+ power_supply_changed(&cdata->ac);
+ }
+
+ return 0;
+
+fail_free_irq:
+ devm_free_irq(cdata->dev, irq, cdata);
+fail_unregister_supply:
+ power_supply_unregister(&cdata->ac);
+
+ return ret;
+}
+
+static int tps65090_charger_remove(struct platform_device *pdev)
+{
+ struct tps65090_charger *cdata = dev_get_drvdata(&pdev->dev);
+
+ devm_free_irq(cdata->dev, cdata->irq, cdata);
+ power_supply_unregister(&cdata->ac);
+
+ return 0;
+}
+
+static struct of_device_id of_tps65090_charger_match[] = {
+ { .compatible = "ti,tps65090-charger", },
+ { /* end */ }
+};
+
+static struct platform_driver tps65090_charger_driver = {
+ .driver = {
+ .name = "tps65090-charger",
+ .of_match_table = of_tps65090_charger_match,
+ .owner = THIS_MODULE,
+ },
+ .probe = tps65090_charger_probe,
+ .remove = tps65090_charger_remove,
+};
+module_platform_driver(tps65090_charger_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Syed Rafiuddin <srafiuddin@nvidia.com>");
+MODULE_DESCRIPTION("tps65090 battery charger driver");
diff --git a/drivers/power/twl4030_charger.c b/drivers/power/twl4030_charger.c
index a69d0d11b540..bed458172dd2 100644
--- a/drivers/power/twl4030_charger.c
+++ b/drivers/power/twl4030_charger.c
@@ -636,17 +636,7 @@ static struct platform_driver twl4030_bci_driver = {
.remove = __exit_p(twl4030_bci_remove),
};
-static int __init twl4030_bci_init(void)
-{
- return platform_driver_probe(&twl4030_bci_driver, twl4030_bci_probe);
-}
-module_init(twl4030_bci_init);
-
-static void __exit twl4030_bci_exit(void)
-{
- platform_driver_unregister(&twl4030_bci_driver);
-}
-module_exit(twl4030_bci_exit);
+module_platform_driver_probe(twl4030_bci_driver, twl4030_bci_probe);
MODULE_AUTHOR("GraÅžvydas Ignotas");
MODULE_DESCRIPTION("TWL4030 Battery Charger Interface driver");
diff --git a/drivers/power/wm831x_backup.c b/drivers/power/wm831x_backup.c
index d9cc169f1424..58cbb009b74f 100644
--- a/drivers/power/wm831x_backup.c
+++ b/drivers/power/wm831x_backup.c
@@ -169,7 +169,8 @@ static int wm831x_backup_probe(struct platform_device *pdev)
struct power_supply *backup;
int ret;
- devdata = kzalloc(sizeof(struct wm831x_backup), GFP_KERNEL);
+ devdata = devm_kzalloc(&pdev->dev, sizeof(struct wm831x_backup),
+ GFP_KERNEL);
if (devdata == NULL)
return -ENOMEM;
@@ -197,14 +198,8 @@ static int wm831x_backup_probe(struct platform_device *pdev)
backup->num_properties = ARRAY_SIZE(wm831x_backup_props);
backup->get_property = wm831x_backup_get_prop;
ret = power_supply_register(&pdev->dev, backup);
- if (ret)
- goto err_kmalloc;
return ret;
-
-err_kmalloc:
- kfree(devdata);
- return ret;
}
static int wm831x_backup_remove(struct platform_device *pdev)
@@ -213,7 +208,6 @@ static int wm831x_backup_remove(struct platform_device *pdev)
power_supply_unregister(&devdata->backup);
kfree(devdata->backup.name);
- kfree(devdata);
return 0;
}