diff options
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/input/touchscreen/ads7846.c | 115 |
1 files changed, 104 insertions, 11 deletions
diff --git a/drivers/input/touchscreen/ads7846.c b/drivers/input/touchscreen/ads7846.c index 5ff041995198..ea195360747e 100644 --- a/drivers/input/touchscreen/ads7846.c +++ b/drivers/input/touchscreen/ads7846.c @@ -27,6 +27,9 @@ #include <linux/interrupt.h> #include <linux/slab.h> #include <linux/pm.h> +#include <linux/of.h> +#include <linux/of_gpio.h> +#include <linux/of_device.h> #include <linux/gpio.h> #include <linux/spi/spi.h> #include <linux/spi/ads7846.h> @@ -1201,9 +1204,87 @@ static void ads7846_setup_spi_msg(struct ads7846 *ts, spi_message_add_tail(x, m); } +#ifdef CONFIG_OF +static const struct of_device_id ads7846_dt_ids[] = { + { .compatible = "ti,tsc2046", .data = (void *) 7846 }, + { .compatible = "ti,ads7843", .data = (void *) 7843 }, + { .compatible = "ti,ads7845", .data = (void *) 7845 }, + { .compatible = "ti,ads7846", .data = (void *) 7846 }, + { .compatible = "ti,ads7873", .data = (void *) 7873 }, + { } +}; +MODULE_DEVICE_TABLE(of, ads7846_dt_ids); + +static const struct ads7846_platform_data *ads7846_probe_dt(struct device *dev) +{ + struct ads7846_platform_data *pdata; + struct device_node *node = dev->of_node; + const struct of_device_id *match; + + if (!node) { + dev_err(dev, "Device does not have associated DT data\n"); + return ERR_PTR(-EINVAL); + } + + match = of_match_device(ads7846_dt_ids, dev); + if (!match) { + dev_err(dev, "Unknown device model\n"); + return ERR_PTR(-EINVAL); + } + + pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL); + if (!pdata) + return ERR_PTR(-ENOMEM); + + pdata->model = (unsigned long)match->data; + + of_property_read_u16(node, "ti,vref-delay-usecs", + &pdata->vref_delay_usecs); + of_property_read_u16(node, "ti,vref-mv", &pdata->vref_mv); + pdata->keep_vref_on = of_property_read_bool(node, "ti,keep-vref-on"); + + pdata->swap_xy = of_property_read_bool(node, "ti,swap-xy"); + + of_property_read_u16(node, "ti,settle-delay-usec", + &pdata->settle_delay_usecs); + of_property_read_u16(node, "ti,penirq-recheck-delay-usecs", + &pdata->penirq_recheck_delay_usecs); + + of_property_read_u16(node, "ti,x-plate-ohms", &pdata->x_plate_ohms); + of_property_read_u16(node, "ti,y-plate-ohms", &pdata->y_plate_ohms); + + of_property_read_u16(node, "ti,x-min", &pdata->x_min); + of_property_read_u16(node, "ti,y-min", &pdata->y_min); + of_property_read_u16(node, "ti,x-max", &pdata->x_max); + of_property_read_u16(node, "ti,y-max", &pdata->y_max); + + of_property_read_u16(node, "ti,pressure-min", &pdata->pressure_min); + of_property_read_u16(node, "ti,pressure-max", &pdata->pressure_max); + + of_property_read_u16(node, "ti,debounce-max", &pdata->debounce_max); + of_property_read_u16(node, "ti,debounce-tol", &pdata->debounce_tol); + of_property_read_u16(node, "ti,debounce-rep", &pdata->debounce_rep); + + of_property_read_u32(node, "ti,pendown-gpio-debounce", + &pdata->gpio_pendown_debounce); + + pdata->wakeup = of_property_read_bool(node, "linux,wakeup"); + + pdata->gpio_pendown = of_get_named_gpio(dev->of_node, "pendown-gpio", 0); + + return pdata; +} +#else +static const struct ads7846_platform_data *ads7846_probe_dt(struct device *dev) +{ + dev_err(dev, "no platform data defined\n"); + return ERR_PTR(-EINVAL); +} +#endif + static int ads7846_probe(struct spi_device *spi) { - const struct ads7846_platform_data *pdata = dev_get_platdata(&spi->dev); + const struct ads7846_platform_data *pdata; struct ads7846 *ts; struct ads7846_packet *packet; struct input_dev *input_dev; @@ -1212,22 +1293,18 @@ static int ads7846_probe(struct spi_device *spi) if (!spi->irq) { dev_dbg(&spi->dev, "no IRQ?\n"); - return -ENODEV; - } - - if (!pdata) { - dev_dbg(&spi->dev, "no platform data?\n"); - return -ENODEV; + return -EINVAL; } /* don't exceed max specified sample rate */ if (spi->max_speed_hz > (125000 * SAMPLE_BITS)) { - dev_dbg(&spi->dev, "f(sample) %d KHz?\n", + dev_err(&spi->dev, "f(sample) %d KHz?\n", (spi->max_speed_hz/SAMPLE_BITS)/1000); return -EINVAL; } - /* We'd set TX word size 8 bits and RX word size to 13 bits ... except + /* + * We'd set TX word size 8 bits and RX word size to 13 bits ... except * that even if the hardware can do that, the SPI controller driver * may not. So we stick to very-portable 8 bit words, both RX and TX. */ @@ -1250,17 +1327,25 @@ static int ads7846_probe(struct spi_device *spi) ts->packet = packet; ts->spi = spi; ts->input = input_dev; - ts->vref_mv = pdata->vref_mv; - ts->swap_xy = pdata->swap_xy; mutex_init(&ts->lock); init_waitqueue_head(&ts->wait); + pdata = dev_get_platdata(&spi->dev); + if (!pdata) { + pdata = ads7846_probe_dt(&spi->dev); + if (IS_ERR(pdata)) + return PTR_ERR(pdata); + } + ts->model = pdata->model ? : 7846; ts->vref_delay_usecs = pdata->vref_delay_usecs ? : 100; ts->x_plate_ohms = pdata->x_plate_ohms ? : 400; ts->pressure_max = pdata->pressure_max ? : ~0; + ts->vref_mv = pdata->vref_mv; + ts->swap_xy = pdata->swap_xy; + if (pdata->filter != NULL) { if (pdata->filter_init != NULL) { err = pdata->filter_init(pdata, &ts->filter_data); @@ -1370,6 +1455,13 @@ static int ads7846_probe(struct spi_device *spi) device_init_wakeup(&spi->dev, pdata->wakeup); + /* + * If device does not carry platform data we must have allocated it + * when parsing DT data. + */ + if (!dev_get_platdata(&spi->dev)) + devm_kfree(&spi->dev, (void *)pdata); + return 0; err_remove_attr_group: @@ -1437,6 +1529,7 @@ static struct spi_driver ads7846_driver = { .name = "ads7846", .owner = THIS_MODULE, .pm = &ads7846_pm, + .of_match_table = of_match_ptr(ads7846_dt_ids), }, .probe = ads7846_probe, .remove = ads7846_remove, |