summaryrefslogtreecommitdiff
path: root/drivers
diff options
context:
space:
mode:
Diffstat (limited to 'drivers')
-rw-r--r--drivers/serial/Kconfig13
-rw-r--r--drivers/serial/Makefile1
-rw-r--r--drivers/serial/apbuart.c710
-rw-r--r--drivers/serial/apbuart.h64
-rw-r--r--drivers/watchdog/riowd.c6
5 files changed, 791 insertions, 3 deletions
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index e52257257279..50943ff78f4b 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -1477,4 +1477,17 @@ config SERIAL_BCM63XX_CONSOLE
If you have enabled the serial port on the bcm63xx CPU
you can make it the console by answering Y to this option.
+config SERIAL_GRLIB_GAISLER_APBUART
+ tristate "GRLIB APBUART serial support"
+ depends on OF
+ ---help---
+ Add support for the GRLIB APBUART serial port.
+
+config SERIAL_GRLIB_GAISLER_APBUART_CONSOLE
+ bool "Console on GRLIB APBUART serial port"
+ depends on SERIAL_GRLIB_GAISLER_APBUART=y
+ select SERIAL_CORE_CONSOLE
+ help
+ Support for running a console on the GRLIB APBUART
+
endmenu
diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile
index d21d5dd5d048..5548fe7df61d 100644
--- a/drivers/serial/Makefile
+++ b/drivers/serial/Makefile
@@ -81,3 +81,4 @@ obj-$(CONFIG_SERIAL_KS8695) += serial_ks8695.o
obj-$(CONFIG_KGDB_SERIAL_CONSOLE) += kgdboc.o
obj-$(CONFIG_SERIAL_QE) += ucc_uart.o
obj-$(CONFIG_SERIAL_TIMBERDALE) += timbuart.o
+obj-$(CONFIG_SERIAL_GRLIB_GAISLER_APBUART) += apbuart.o
diff --git a/drivers/serial/apbuart.c b/drivers/serial/apbuart.c
new file mode 100644
index 000000000000..fe91319b5f65
--- /dev/null
+++ b/drivers/serial/apbuart.c
@@ -0,0 +1,710 @@
+/*
+ * Driver for GRLIB serial ports (APBUART)
+ *
+ * Based on linux/drivers/serial/amba.c
+ *
+ * Copyright (C) 2000 Deep Blue Solutions Ltd.
+ * Copyright (C) 2003 Konrad Eisele <eiselekd@web.de>
+ * Copyright (C) 2006 Daniel Hellstrom <daniel@gaisler.com>, Aeroflex Gaisler AB
+ * Copyright (C) 2008 Gilead Kutnick <kutnickg@zin-tech.com>
+ * Copyright (C) 2009 Kristoffer Glembo <kristoffer@gaisler.com>, Aeroflex Gaisler AB
+ */
+
+#if defined(CONFIG_SERIAL_GRLIB_GAISLER_APBUART_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
+#define SUPPORT_SYSRQ
+#endif
+
+#include <linux/module.h>
+#include <linux/tty.h>
+#include <linux/ioport.h>
+#include <linux/init.h>
+#include <linux/serial.h>
+#include <linux/console.h>
+#include <linux/sysrq.h>
+#include <linux/kthread.h>
+#include <linux/device.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/serial_core.h>
+#include <asm/irq.h>
+
+#include "apbuart.h"
+
+#define SERIAL_APBUART_MAJOR TTY_MAJOR
+#define SERIAL_APBUART_MINOR 64
+#define UART_DUMMY_RSR_RX 0x8000 /* for ignore all read */
+
+static void apbuart_tx_chars(struct uart_port *port);
+
+static void apbuart_stop_tx(struct uart_port *port)
+{
+ unsigned int cr;
+
+ cr = UART_GET_CTRL(port);
+ cr &= ~UART_CTRL_TI;
+ UART_PUT_CTRL(port, cr);
+}
+
+static void apbuart_start_tx(struct uart_port *port)
+{
+ unsigned int cr;
+
+ cr = UART_GET_CTRL(port);
+ cr |= UART_CTRL_TI;
+ UART_PUT_CTRL(port, cr);
+
+ if (UART_GET_STATUS(port) & UART_STATUS_THE)
+ apbuart_tx_chars(port);
+}
+
+static void apbuart_stop_rx(struct uart_port *port)
+{
+ unsigned int cr;
+
+ cr = UART_GET_CTRL(port);
+ cr &= ~(UART_CTRL_RI);
+ UART_PUT_CTRL(port, cr);
+}
+
+static void apbuart_enable_ms(struct uart_port *port)
+{
+ /* No modem status change interrupts for APBUART */
+}
+
+static void apbuart_rx_chars(struct uart_port *port)
+{
+ struct tty_struct *tty = port->state->port.tty;
+ unsigned int status, ch, rsr, flag;
+ unsigned int max_chars = port->fifosize;
+
+ status = UART_GET_STATUS(port);
+
+ while (UART_RX_DATA(status) && (max_chars--)) {
+
+ ch = UART_GET_CHAR(port);
+ flag = TTY_NORMAL;
+
+ port->icount.rx++;
+
+ rsr = UART_GET_STATUS(port) | UART_DUMMY_RSR_RX;
+ UART_PUT_STATUS(port, 0);
+ if (rsr & UART_STATUS_ERR) {
+
+ if (rsr & UART_STATUS_BR) {
+ rsr &= ~(UART_STATUS_FE | UART_STATUS_PE);
+ port->icount.brk++;
+ if (uart_handle_break(port))
+ goto ignore_char;
+ } else if (rsr & UART_STATUS_PE) {
+ port->icount.parity++;
+ } else if (rsr & UART_STATUS_FE) {
+ port->icount.frame++;
+ }
+ if (rsr & UART_STATUS_OE)
+ port->icount.overrun++;
+
+ rsr &= port->read_status_mask;
+
+ if (rsr & UART_STATUS_PE)
+ flag = TTY_PARITY;
+ else if (rsr & UART_STATUS_FE)
+ flag = TTY_FRAME;
+ }
+
+ if (uart_handle_sysrq_char(port, ch))
+ goto ignore_char;
+
+ uart_insert_char(port, rsr, UART_STATUS_OE, ch, flag);
+
+
+ ignore_char:
+ status = UART_GET_STATUS(port);
+ }
+
+ tty_flip_buffer_push(tty);
+}
+
+static void apbuart_tx_chars(struct uart_port *port)
+{
+ struct circ_buf *xmit = &port->state->xmit;
+ int count;
+
+ if (port->x_char) {
+ UART_PUT_CHAR(port, port->x_char);
+ port->icount.tx++;
+ port->x_char = 0;
+ return;
+ }
+
+ if (uart_circ_empty(xmit) || uart_tx_stopped(port)) {
+ apbuart_stop_tx(port);
+ return;
+ }
+
+ /* amba: fill FIFO */
+ count = port->fifosize >> 1;
+ do {
+ UART_PUT_CHAR(port, xmit->buf[xmit->tail]);
+ xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
+ port->icount.tx++;
+ if (uart_circ_empty(xmit))
+ break;
+ } while (--count > 0);
+
+ if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ uart_write_wakeup(port);
+
+ if (uart_circ_empty(xmit))
+ apbuart_stop_tx(port);
+}
+
+static irqreturn_t apbuart_int(int irq, void *dev_id)
+{
+ struct uart_port *port = dev_id;
+ unsigned int status;
+
+ spin_lock(&port->lock);
+
+ status = UART_GET_STATUS(port);
+ if (status & UART_STATUS_DR)
+ apbuart_rx_chars(port);
+ if (status & UART_STATUS_THE)
+ apbuart_tx_chars(port);
+
+ spin_unlock(&port->lock);
+
+ return IRQ_HANDLED;
+}
+
+static unsigned int apbuart_tx_empty(struct uart_port *port)
+{
+ unsigned int status = UART_GET_STATUS(port);
+ return status & UART_STATUS_THE ? TIOCSER_TEMT : 0;
+}
+
+static unsigned int apbuart_get_mctrl(struct uart_port *port)
+{
+ /* The GRLIB APBUART handles flow control in hardware */
+ return TIOCM_CAR | TIOCM_DSR | TIOCM_CTS;
+}
+
+static void apbuart_set_mctrl(struct uart_port *port, unsigned int mctrl)
+{
+ /* The GRLIB APBUART handles flow control in hardware */
+}
+
+static void apbuart_break_ctl(struct uart_port *port, int break_state)
+{
+ /* We don't support sending break */
+}
+
+static int apbuart_startup(struct uart_port *port)
+{
+ int retval;
+ unsigned int cr;
+
+ /* Allocate the IRQ */
+ retval = request_irq(port->irq, apbuart_int, 0, "apbuart", port);
+ if (retval)
+ return retval;
+
+ /* Finally, enable interrupts */
+ cr = UART_GET_CTRL(port);
+ UART_PUT_CTRL(port,
+ cr | UART_CTRL_RE | UART_CTRL_TE |
+ UART_CTRL_RI | UART_CTRL_TI);
+
+ return 0;
+}
+
+static void apbuart_shutdown(struct uart_port *port)
+{
+ unsigned int cr;
+
+ /* disable all interrupts, disable the port */
+ cr = UART_GET_CTRL(port);
+ UART_PUT_CTRL(port,
+ cr & ~(UART_CTRL_RE | UART_CTRL_TE |
+ UART_CTRL_RI | UART_CTRL_TI));
+
+ /* Free the interrupt */
+ free_irq(port->irq, port);
+}
+
+static void apbuart_set_termios(struct uart_port *port,
+ struct ktermios *termios, struct ktermios *old)
+{
+ unsigned int cr;
+ unsigned long flags;
+ unsigned int baud, quot;
+
+ /* Ask the core to calculate the divisor for us. */
+ baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk / 16);
+ if (baud == 0)
+ panic("invalid baudrate %i\n", port->uartclk / 16);
+
+ /* uart_get_divisor calc a *16 uart freq, apbuart is *8 */
+ quot = (uart_get_divisor(port, baud)) * 2;
+ cr = UART_GET_CTRL(port);
+ cr &= ~(UART_CTRL_PE | UART_CTRL_PS);
+
+ if (termios->c_cflag & PARENB) {
+ cr |= UART_CTRL_PE;
+ if ((termios->c_cflag & PARODD))
+ cr |= UART_CTRL_PS;
+ }
+
+ /* Enable flow control. */
+ if (termios->c_cflag & CRTSCTS)
+ cr |= UART_CTRL_FL;
+
+ spin_lock_irqsave(&port->lock, flags);
+
+ /* Update the per-port timeout. */
+ uart_update_timeout(port, termios->c_cflag, baud);
+
+ port->read_status_mask = UART_STATUS_OE;
+ if (termios->c_iflag & INPCK)
+ port->read_status_mask |= UART_STATUS_FE | UART_STATUS_PE;
+
+ /* Characters to ignore */
+ port->ignore_status_mask = 0;
+ if (termios->c_iflag & IGNPAR)
+ port->ignore_status_mask |= UART_STATUS_FE | UART_STATUS_PE;
+
+ /* Ignore all characters if CREAD is not set. */
+ if ((termios->c_cflag & CREAD) == 0)
+ port->ignore_status_mask |= UART_DUMMY_RSR_RX;
+
+ /* Set baud rate */
+ quot -= 1;
+ UART_PUT_SCAL(port, quot);
+ UART_PUT_CTRL(port, cr);
+
+ spin_unlock_irqrestore(&port->lock, flags);
+}
+
+static const char *apbuart_type(struct uart_port *port)
+{
+ return port->type == PORT_APBUART ? "GRLIB/APBUART" : NULL;
+}
+
+static void apbuart_release_port(struct uart_port *port)
+{
+ release_mem_region(port->mapbase, 0x100);
+}
+
+static int apbuart_request_port(struct uart_port *port)
+{
+ return request_mem_region(port->mapbase, 0x100, "grlib-apbuart")
+ != NULL ? 0 : -EBUSY;
+ return 0;
+}
+
+/* Configure/autoconfigure the port */
+static void apbuart_config_port(struct uart_port *port, int flags)
+{
+ if (flags & UART_CONFIG_TYPE) {
+ port->type = PORT_APBUART;
+ apbuart_request_port(port);
+ }
+}
+
+/* Verify the new serial_struct (for TIOCSSERIAL) */
+static int apbuart_verify_port(struct uart_port *port,
+ struct serial_struct *ser)
+{
+ int ret = 0;
+ if (ser->type != PORT_UNKNOWN && ser->type != PORT_APBUART)
+ ret = -EINVAL;
+ if (ser->irq < 0 || ser->irq >= NR_IRQS)
+ ret = -EINVAL;
+ if (ser->baud_base < 9600)
+ ret = -EINVAL;
+ return ret;
+}
+
+static struct uart_ops grlib_apbuart_ops = {
+ .tx_empty = apbuart_tx_empty,
+ .set_mctrl = apbuart_set_mctrl,
+ .get_mctrl = apbuart_get_mctrl,
+ .stop_tx = apbuart_stop_tx,
+ .start_tx = apbuart_start_tx,
+ .stop_rx = apbuart_stop_rx,
+ .enable_ms = apbuart_enable_ms,
+ .break_ctl = apbuart_break_ctl,
+ .startup = apbuart_startup,
+ .shutdown = apbuart_shutdown,
+ .set_termios = apbuart_set_termios,
+ .type = apbuart_type,
+ .release_port = apbuart_release_port,
+ .request_port = apbuart_request_port,
+ .config_port = apbuart_config_port,
+ .verify_port = apbuart_verify_port,
+};
+
+static struct uart_port grlib_apbuart_ports[UART_NR];
+static struct device_node *grlib_apbuart_nodes[UART_NR];
+
+static int apbuart_scan_fifo_size(struct uart_port *port, int portnumber)
+{
+ int ctrl, loop = 0;
+ int status;
+ int fifosize;
+ unsigned long flags;
+
+ ctrl = UART_GET_CTRL(port);
+
+ /*
+ * Enable the transceiver and wait for it to be ready to send data.
+ * Clear interrupts so that this process will not be externally
+ * interrupted in the middle (which can cause the transceiver to
+ * drain prematurely).
+ */
+
+ local_irq_save(flags);
+
+ UART_PUT_CTRL(port, ctrl | UART_CTRL_TE);
+
+ while (!UART_TX_READY(UART_GET_STATUS(port)))
+ loop++;
+
+ /*
+ * Disable the transceiver so data isn't actually sent during the
+ * actual test.
+ */
+
+ UART_PUT_CTRL(port, ctrl & ~(UART_CTRL_TE));
+
+ fifosize = 1;
+ UART_PUT_CHAR(port, 0);
+
+ /*
+ * So long as transmitting a character increments the tranceivier FIFO
+ * length the FIFO must be at least that big. These bytes will
+ * automatically drain off of the FIFO.
+ */
+
+ status = UART_GET_STATUS(port);
+ while (((status >> 20) & 0x3F) == fifosize) {
+ fifosize++;
+ UART_PUT_CHAR(port, 0);
+ status = UART_GET_STATUS(port);
+ }
+
+ fifosize--;
+
+ UART_PUT_CTRL(port, ctrl);
+ local_irq_restore(flags);
+
+ if (fifosize == 0)
+ fifosize = 1;
+
+ return fifosize;
+}
+
+static void apbuart_flush_fifo(struct uart_port *port)
+{
+ int i;
+
+ for (i = 0; i < port->fifosize; i++)
+ UART_GET_CHAR(port);
+}
+
+
+/* ======================================================================== */
+/* Console driver, if enabled */
+/* ======================================================================== */
+
+#ifdef CONFIG_SERIAL_GRLIB_GAISLER_APBUART_CONSOLE
+
+static void apbuart_console_putchar(struct uart_port *port, int ch)
+{
+ unsigned int status;
+ do {
+ status = UART_GET_STATUS(port);
+ } while (!UART_TX_READY(status));
+ UART_PUT_CHAR(port, ch);
+}
+
+static void
+apbuart_console_write(struct console *co, const char *s, unsigned int count)
+{
+ struct uart_port *port = &grlib_apbuart_ports[co->index];
+ unsigned int status, old_cr, new_cr;
+
+ /* First save the CR then disable the interrupts */
+ old_cr = UART_GET_CTRL(port);
+ new_cr = old_cr & ~(UART_CTRL_RI | UART_CTRL_TI);
+ UART_PUT_CTRL(port, new_cr);
+
+ uart_console_write(port, s, count, apbuart_console_putchar);
+
+ /*
+ * Finally, wait for transmitter to become empty
+ * and restore the TCR
+ */
+ do {
+ status = UART_GET_STATUS(port);
+ } while (!UART_TX_READY(status));
+ UART_PUT_CTRL(port, old_cr);
+}
+
+static void __init
+apbuart_console_get_options(struct uart_port *port, int *baud,
+ int *parity, int *bits)
+{
+ if (UART_GET_CTRL(port) & (UART_CTRL_RE | UART_CTRL_TE)) {
+
+ unsigned int quot, status;
+ status = UART_GET_STATUS(port);
+
+ *parity = 'n';
+ if (status & UART_CTRL_PE) {
+ if ((status & UART_CTRL_PS) == 0)
+ *parity = 'e';
+ else
+ *parity = 'o';
+ }
+
+ *bits = 8;
+ quot = UART_GET_SCAL(port) / 8;
+ *baud = port->uartclk / (16 * (quot + 1));
+ }
+}
+
+static int __init apbuart_console_setup(struct console *co, char *options)
+{
+ struct uart_port *port;
+ int baud = 38400;
+ int bits = 8;
+ int parity = 'n';
+ int flow = 'n';
+
+ pr_debug("apbuart_console_setup co=%p, co->index=%i, options=%s\n",
+ co, co->index, options);
+
+ /*
+ * Check whether an invalid uart number has been specified, and
+ * if so, search for the first available port that does have
+ * console support.
+ */
+ if (co->index >= grlib_apbuart_port_nr)
+ co->index = 0;
+
+ port = &grlib_apbuart_ports[co->index];
+
+ spin_lock_init(&port->lock);
+
+ if (options)
+ uart_parse_options(options, &baud, &parity, &bits, &flow);
+ else
+ apbuart_console_get_options(port, &baud, &parity, &bits);
+
+ return uart_set_options(port, co, baud, parity, bits, flow);
+}
+
+static struct uart_driver grlib_apbuart_driver;
+
+static struct console grlib_apbuart_console = {
+ .name = "ttyS",
+ .write = apbuart_console_write,
+ .device = uart_console_device,
+ .setup = apbuart_console_setup,
+ .flags = CON_PRINTBUFFER,
+ .index = -1,
+ .data = &grlib_apbuart_driver,
+};
+
+
+static void grlib_apbuart_configure(void);
+
+static int __init apbuart_console_init(void)
+{
+ grlib_apbuart_configure();
+ register_console(&grlib_apbuart_console);
+ return 0;
+}
+
+console_initcall(apbuart_console_init);
+
+#define APBUART_CONSOLE (&grlib_apbuart_console)
+#else
+#define APBUART_CONSOLE NULL
+#endif
+
+static struct uart_driver grlib_apbuart_driver = {
+ .owner = THIS_MODULE,
+ .driver_name = "serial",
+ .dev_name = "ttyS",
+ .major = SERIAL_APBUART_MAJOR,
+ .minor = SERIAL_APBUART_MINOR,
+ .nr = UART_NR,
+ .cons = APBUART_CONSOLE,
+};
+
+
+/* ======================================================================== */
+/* OF Platform Driver */
+/* ======================================================================== */
+
+static int __devinit apbuart_probe(struct of_device *op,
+ const struct of_device_id *match)
+{
+ int i = -1;
+ struct uart_port *port = NULL;
+
+ i = 0;
+ for (i = 0; i < grlib_apbuart_port_nr; i++) {
+ if (op->node == grlib_apbuart_nodes[i])
+ break;
+ }
+
+ port = &grlib_apbuart_ports[i];
+ port->dev = &op->dev;
+
+ uart_add_one_port(&grlib_apbuart_driver, (struct uart_port *) port);
+
+ apbuart_flush_fifo((struct uart_port *) port);
+
+ printk(KERN_INFO "grlib-apbuart at 0x%llx, irq %d\n",
+ (unsigned long long) port->mapbase, port->irq);
+ return 0;
+
+}
+
+static struct of_device_id __initdata apbuart_match[] = {
+ {
+ .name = "GAISLER_APBUART",
+ },
+ {},
+};
+
+static struct of_platform_driver grlib_apbuart_of_driver = {
+ .match_table = apbuart_match,
+ .probe = apbuart_probe,
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "grlib-apbuart",
+ },
+};
+
+
+static void grlib_apbuart_configure(void)
+{
+ static int enum_done;
+ struct device_node *np, *rp;
+ struct uart_port *port = NULL;
+ const u32 *prop;
+ int freq_khz;
+ int v = 0, d = 0;
+ unsigned int addr;
+ int irq, line;
+ struct amba_prom_registers *regs;
+
+ if (enum_done)
+ return;
+
+ /* Get bus frequency */
+ rp = of_find_node_by_path("/");
+ rp = of_get_next_child(rp, NULL);
+ prop = of_get_property(rp, "clock-frequency", NULL);
+ freq_khz = *prop;
+
+ line = 0;
+ for_each_matching_node(np, apbuart_match) {
+
+ int *vendor = (int *) of_get_property(np, "vendor", NULL);
+ int *device = (int *) of_get_property(np, "device", NULL);
+ int *irqs = (int *) of_get_property(np, "interrupts", NULL);
+ regs = (struct amba_prom_registers *)
+ of_get_property(np, "reg", NULL);
+
+ if (vendor)
+ v = *vendor;
+ if (device)
+ d = *device;
+
+ if (!irqs || !regs)
+ return;
+
+ grlib_apbuart_nodes[line] = np;
+
+ addr = regs->phys_addr;
+ irq = *irqs;
+
+ port = &grlib_apbuart_ports[line];
+
+ port->mapbase = addr;
+ port->membase = ioremap(addr, sizeof(struct grlib_apbuart_regs_map));
+ port->irq = irq;
+ port->iotype = UPIO_MEM;
+ port->ops = &grlib_apbuart_ops;
+ port->flags = UPF_BOOT_AUTOCONF;
+ port->line = line;
+ port->uartclk = freq_khz * 1000;
+ port->fifosize = apbuart_scan_fifo_size((struct uart_port *) port, line);
+ line++;
+
+ /* We support maximum UART_NR uarts ... */
+ if (line == UART_NR)
+ break;
+
+ }
+
+ enum_done = 1;
+
+ grlib_apbuart_driver.nr = grlib_apbuart_port_nr = line;
+}
+
+static int __init grlib_apbuart_init(void)
+{
+ int ret;
+
+ /* Find all APBUARTS in device the tree and initialize their ports */
+ grlib_apbuart_configure();
+
+ printk(KERN_INFO "Serial: GRLIB APBUART driver\n");
+
+ ret = uart_register_driver(&grlib_apbuart_driver);
+
+ if (ret) {
+ printk(KERN_ERR "%s: uart_register_driver failed (%i)\n",
+ __FILE__, ret);
+ return ret;
+ }
+
+ ret = of_register_platform_driver(&grlib_apbuart_of_driver);
+ if (ret) {
+ printk(KERN_ERR
+ "%s: of_register_platform_driver failed (%i)\n",
+ __FILE__, ret);
+ uart_unregister_driver(&grlib_apbuart_driver);
+ return ret;
+ }
+
+ return ret;
+}
+
+static void __exit grlib_apbuart_exit(void)
+{
+ int i;
+
+ for (i = 0; i < grlib_apbuart_port_nr; i++)
+ uart_remove_one_port(&grlib_apbuart_driver,
+ &grlib_apbuart_ports[i]);
+
+ uart_unregister_driver(&grlib_apbuart_driver);
+ of_unregister_platform_driver(&grlib_apbuart_of_driver);
+}
+
+module_init(grlib_apbuart_init);
+module_exit(grlib_apbuart_exit);
+
+MODULE_AUTHOR("Aeroflex Gaisler AB");
+MODULE_DESCRIPTION("GRLIB APBUART serial driver");
+MODULE_VERSION("2.1");
+MODULE_LICENSE("GPL");
diff --git a/drivers/serial/apbuart.h b/drivers/serial/apbuart.h
new file mode 100644
index 000000000000..5faf87c8d2bc
--- /dev/null
+++ b/drivers/serial/apbuart.h
@@ -0,0 +1,64 @@
+#ifndef __GRLIB_APBUART_H__
+#define __GRLIB_APBUART_H__
+
+#include <asm/io.h>
+
+#define UART_NR 8
+static int grlib_apbuart_port_nr;
+
+struct grlib_apbuart_regs_map {
+ u32 data;
+ u32 status;
+ u32 ctrl;
+ u32 scaler;
+};
+
+struct amba_prom_registers {
+ unsigned int phys_addr;
+ unsigned int reg_size;
+};
+
+/*
+ * The following defines the bits in the APBUART Status Registers.
+ */
+#define UART_STATUS_DR 0x00000001 /* Data Ready */
+#define UART_STATUS_TSE 0x00000002 /* TX Send Register Empty */
+#define UART_STATUS_THE 0x00000004 /* TX Hold Register Empty */
+#define UART_STATUS_BR 0x00000008 /* Break Error */
+#define UART_STATUS_OE 0x00000010 /* RX Overrun Error */
+#define UART_STATUS_PE 0x00000020 /* RX Parity Error */
+#define UART_STATUS_FE 0x00000040 /* RX Framing Error */
+#define UART_STATUS_ERR 0x00000078 /* Error Mask */
+
+/*
+ * The following defines the bits in the APBUART Ctrl Registers.
+ */
+#define UART_CTRL_RE 0x00000001 /* Receiver enable */
+#define UART_CTRL_TE 0x00000002 /* Transmitter enable */
+#define UART_CTRL_RI 0x00000004 /* Receiver interrupt enable */
+#define UART_CTRL_TI 0x00000008 /* Transmitter irq */
+#define UART_CTRL_PS 0x00000010 /* Parity select */
+#define UART_CTRL_PE 0x00000020 /* Parity enable */
+#define UART_CTRL_FL 0x00000040 /* Flow control enable */
+#define UART_CTRL_LB 0x00000080 /* Loopback enable */
+
+#define APBBASE(port) ((struct grlib_apbuart_regs_map *)((port)->membase))
+
+#define APBBASE_DATA_P(port) (&(APBBASE(port)->data))
+#define APBBASE_STATUS_P(port) (&(APBBASE(port)->status))
+#define APBBASE_CTRL_P(port) (&(APBBASE(port)->ctrl))
+#define APBBASE_SCALAR_P(port) (&(APBBASE(port)->scaler))
+
+#define UART_GET_CHAR(port) (__raw_readl(APBBASE_DATA_P(port)))
+#define UART_PUT_CHAR(port, v) (__raw_writel(v, APBBASE_DATA_P(port)))
+#define UART_GET_STATUS(port) (__raw_readl(APBBASE_STATUS_P(port)))
+#define UART_PUT_STATUS(port, v)(__raw_writel(v, APBBASE_STATUS_P(port)))
+#define UART_GET_CTRL(port) (__raw_readl(APBBASE_CTRL_P(port)))
+#define UART_PUT_CTRL(port, v) (__raw_writel(v, APBBASE_CTRL_P(port)))
+#define UART_GET_SCAL(port) (__raw_readl(APBBASE_SCALAR_P(port)))
+#define UART_PUT_SCAL(port, v) (__raw_writel(v, APBBASE_SCALAR_P(port)))
+
+#define UART_RX_DATA(s) (((s) & UART_STATUS_DR) != 0)
+#define UART_TX_READY(s) (((s) & UART_STATUS_THE) != 0)
+
+#endif /* __GRLIB_APBUART_H__ */
diff --git a/drivers/watchdog/riowd.c b/drivers/watchdog/riowd.c
index d3c824dc2358..c14ae8676903 100644
--- a/drivers/watchdog/riowd.c
+++ b/drivers/watchdog/riowd.c
@@ -10,7 +10,6 @@
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/miscdevice.h>
-#include <linux/smp_lock.h>
#include <linux/watchdog.h>
#include <linux/of.h>
#include <linux/of_device.h>
@@ -75,7 +74,6 @@ static void riowd_writereg(struct riowd *p, u8 val, int index)
static int riowd_open(struct inode *inode, struct file *filp)
{
- cycle_kernel_lock();
nonseekable_open(inode, filp);
return 0;
}
@@ -194,6 +192,8 @@ static int __devinit riowd_probe(struct of_device *op,
printk(KERN_ERR PFX "Cannot map registers.\n");
goto out_free;
}
+ /* Make miscdev useable right away */
+ riowd_device = p;
err = misc_register(&riowd_miscdev);
if (err) {
@@ -205,10 +205,10 @@ static int __devinit riowd_probe(struct of_device *op,
"regs at %p\n", riowd_timeout, p->regs);
dev_set_drvdata(&op->dev, p);
- riowd_device = p;
return 0;
out_iounmap:
+ riowd_device = NULL;
of_iounmap(&op->resource[0], p->regs, 2);
out_free: