diff options
Diffstat (limited to 'drivers')
82 files changed, 156 insertions, 346 deletions
diff --git a/drivers/ata/pata_pcmcia.c b/drivers/ata/pata_pcmcia.c index c2679c01188b..76da55d27e08 100644 --- a/drivers/ata/pata_pcmcia.c +++ b/drivers/ata/pata_pcmcia.c @@ -34,7 +34,6 @@ #include <linux/ata.h> #include <linux/libata.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/ds.h> #include <pcmcia/cisreg.h> @@ -249,7 +248,7 @@ static int pcmcia_init_one(struct pcmcia_device *pdev) /* Set up attributes in order to probe card and get resources */ pdev->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; pdev->resource[1]->flags |= IO_DATA_PATH_WIDTH_8; - pdev->conf.Attributes = CONF_ENABLE_IRQ; + pdev->config_flags |= CONF_ENABLE_IRQ; /* See if we have a manufacturer identifier. Use it to set is_kme for vendor quirks */ @@ -275,7 +274,7 @@ static int pcmcia_init_one(struct pcmcia_device *pdev) if (!pdev->irq) goto failed; - ret = pcmcia_request_configuration(pdev, &pdev->conf); + ret = pcmcia_enable_device(pdev); if (ret) goto failed; diff --git a/drivers/bluetooth/bluecard_cs.c b/drivers/bluetooth/bluecard_cs.c index 08f4818ad9f7..c9dd5b789d25 100644 --- a/drivers/bluetooth/bluecard_cs.c +++ b/drivers/bluetooth/bluecard_cs.c @@ -39,7 +39,6 @@ #include <linux/skbuff.h> #include <linux/io.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/ciscode.h> #include <pcmcia/ds.h> @@ -865,7 +864,7 @@ static int bluecard_probe(struct pcmcia_device *link) info->p_dev = link; link->priv = info; - link->conf.Attributes = CONF_ENABLE_IRQ; + link->config_flags |= CONF_ENABLE_IRQ; return bluecard_config(link); } @@ -905,7 +904,7 @@ static int bluecard_config(struct pcmcia_device *link) if (i != 0) goto failed; - i = pcmcia_request_configuration(link, &link->conf); + i = pcmcia_enable_device(link); if (i != 0) goto failed; diff --git a/drivers/bluetooth/bt3c_cs.c b/drivers/bluetooth/bt3c_cs.c index fb018073a5f8..3db95887cfd7 100644 --- a/drivers/bluetooth/bt3c_cs.c +++ b/drivers/bluetooth/bt3c_cs.c @@ -45,7 +45,6 @@ #include <linux/device.h> #include <linux/firmware.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/ciscode.h> #include <pcmcia/ds.h> @@ -660,7 +659,7 @@ static int bt3c_probe(struct pcmcia_device *link) link->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; link->resource[0]->end = 8; - link->conf.Attributes = CONF_ENABLE_IRQ; + link->config_flags |= CONF_ENABLE_IRQ; return bt3c_config(link); } @@ -741,7 +740,7 @@ found_port: if (i != 0) goto failed; - i = pcmcia_request_configuration(link, &link->conf); + i = pcmcia_enable_device(link); if (i != 0) goto failed; diff --git a/drivers/bluetooth/btuart_cs.c b/drivers/bluetooth/btuart_cs.c index 897c7c74ca14..c5c43594ae0e 100644 --- a/drivers/bluetooth/btuart_cs.c +++ b/drivers/bluetooth/btuart_cs.c @@ -41,7 +41,6 @@ #include <asm/system.h> #include <asm/io.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/ciscode.h> #include <pcmcia/ds.h> @@ -589,7 +588,7 @@ static int btuart_probe(struct pcmcia_device *link) link->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; link->resource[0]->end = 8; - link->conf.Attributes = CONF_ENABLE_IRQ; + link->config_flags |= CONF_ENABLE_IRQ; return btuart_config(link); } @@ -670,7 +669,7 @@ found_port: if (i != 0) goto failed; - i = pcmcia_request_configuration(link, &link->conf); + i = pcmcia_enable_device(link); if (i != 0) goto failed; diff --git a/drivers/bluetooth/dtl1_cs.c b/drivers/bluetooth/dtl1_cs.c index b4c9a2e0a96b..38206df7206b 100644 --- a/drivers/bluetooth/dtl1_cs.c +++ b/drivers/bluetooth/dtl1_cs.c @@ -41,7 +41,6 @@ #include <asm/system.h> #include <asm/io.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/ciscode.h> #include <pcmcia/ds.h> @@ -575,7 +574,7 @@ static int dtl1_probe(struct pcmcia_device *link) link->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; link->resource[0]->end = 8; - link->conf.Attributes = CONF_ENABLE_IRQ; + link->config_flags |= CONF_ENABLE_IRQ; return dtl1_config(link); } @@ -619,7 +618,7 @@ static int dtl1_config(struct pcmcia_device *link) if (i != 0) goto failed; - i = pcmcia_request_configuration(link, &link->conf); + i = pcmcia_enable_device(link); if (i != 0) goto failed; diff --git a/drivers/char/pcmcia/cm4000_cs.c b/drivers/char/pcmcia/cm4000_cs.c index d2accd64b3f5..75caa8c1b484 100644 --- a/drivers/char/pcmcia/cm4000_cs.c +++ b/drivers/char/pcmcia/cm4000_cs.c @@ -34,7 +34,6 @@ #include <linux/uaccess.h> #include <linux/io.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/cisreg.h> #include <pcmcia/ciscode.h> @@ -1767,7 +1766,7 @@ static int cm4000_config(struct pcmcia_device * link, int devno) if (pcmcia_loop_config(link, cm4000_config_check, NULL)) goto cs_release; - if (pcmcia_request_configuration(link, &link->conf)) + if (pcmcia_enable_device(link)) goto cs_release; dev = link->priv; diff --git a/drivers/char/pcmcia/cm4040_cs.c b/drivers/char/pcmcia/cm4040_cs.c index a32eba0afdfc..0c87b80bf641 100644 --- a/drivers/char/pcmcia/cm4040_cs.c +++ b/drivers/char/pcmcia/cm4040_cs.c @@ -29,7 +29,6 @@ #include <asm/uaccess.h> #include <asm/io.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/cisreg.h> #include <pcmcia/ciscode.h> @@ -547,10 +546,10 @@ static int reader_config(struct pcmcia_device *link, int devno) if (pcmcia_loop_config(link, cm4040_config_check, NULL)) goto cs_release; - fail_rc = pcmcia_request_configuration(link, &link->conf); + fail_rc = pcmcia_enable_device(link); if (fail_rc != 0) { dev_printk(KERN_INFO, &link->dev, - "pcmcia_request_configuration failed 0x%x\n", + "pcmcia_enable_device failed 0x%x\n", fail_rc); goto cs_release; } diff --git a/drivers/char/pcmcia/ipwireless/main.c b/drivers/char/pcmcia/ipwireless/main.c index 05c4e6834a6b..cd21b2bcdcd7 100644 --- a/drivers/char/pcmcia/ipwireless/main.c +++ b/drivers/char/pcmcia/ipwireless/main.c @@ -32,7 +32,6 @@ #include <pcmcia/device_id.h> #include <pcmcia/ss.h> #include <pcmcia/ds.h> -#include <pcmcia/cs.h> static struct pcmcia_device_id ipw_ids[] = { PCMCIA_DEVICE_MANF_CARD(0x02f2, 0x0100), @@ -172,7 +171,7 @@ static int config_ipwireless(struct ipw_dev *ipw) if (ret != 0) return ret; - link->conf.Attributes = CONF_ENABLE_IRQ; + link->config_flags |= CONF_ENABLE_IRQ; INIT_WORK(&ipw->work_reboot, signalled_reboot_work); @@ -210,8 +209,7 @@ static int config_ipwireless(struct ipw_dev *ipw) * Do the RequestConfiguration last, because it enables interrupts. * Then we don't get any interrupts before we're ready for them. */ - ret = pcmcia_request_configuration(link, &link->conf); - + ret = pcmcia_enable_device(link); if (ret != 0) goto exit; diff --git a/drivers/char/pcmcia/ipwireless/main.h b/drivers/char/pcmcia/ipwireless/main.h index 90402195855e..f2cbb116bccb 100644 --- a/drivers/char/pcmcia/ipwireless/main.h +++ b/drivers/char/pcmcia/ipwireless/main.h @@ -21,7 +21,6 @@ #include <linux/sched.h> #include <linux/types.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/ds.h> diff --git a/drivers/char/pcmcia/ipwireless/tty.h b/drivers/char/pcmcia/ipwireless/tty.h index 3e163d4cab15..747b2d637860 100644 --- a/drivers/char/pcmcia/ipwireless/tty.h +++ b/drivers/char/pcmcia/ipwireless/tty.h @@ -21,7 +21,6 @@ #include <linux/types.h> #include <linux/sched.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/ds.h> diff --git a/drivers/char/pcmcia/synclink_cs.c b/drivers/char/pcmcia/synclink_cs.c index 535aa0899e9f..99feaedc53a1 100644 --- a/drivers/char/pcmcia/synclink_cs.c +++ b/drivers/char/pcmcia/synclink_cs.c @@ -70,7 +70,6 @@ #include <linux/workqueue.h> #include <linux/hdlc.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/cisreg.h> #include <pcmcia/ds.h> @@ -550,8 +549,6 @@ static int mgslpc_probe(struct pcmcia_device *link) /* Initialize the struct pcmcia_device structure */ - link->conf.Attributes = 0; - ret = mgslpc_config(link); if (ret) return ret; @@ -593,14 +590,14 @@ static int mgslpc_config(struct pcmcia_device *link) if (ret != 0) goto failed; - link->conf.Attributes = CONF_ENABLE_IRQ; + link->config_flags |= CONF_ENABLE_IRQ; link->config_index = 8; link->config_regs = PRESENT_OPTION; ret = pcmcia_request_irq(link, mgslpc_isr); if (ret) goto failed; - ret = pcmcia_request_configuration(link, &link->conf); + ret = pcmcia_enable_device(link); if (ret) goto failed; @@ -609,8 +606,7 @@ static int mgslpc_config(struct pcmcia_device *link) dev_info(&link->dev, "index 0x%02x:", link->config_index); - if (link->conf.Attributes & CONF_ENABLE_IRQ) - printk(", irq %d", link->irq); + printk(", irq %d", link->irq); if (link->resource[0]) printk(", io %pR", link->resource[0]); printk("\n"); diff --git a/drivers/ide/ide-cs.c b/drivers/ide/ide-cs.c index 07e37876559c..87ad04925a9f 100644 --- a/drivers/ide/ide-cs.c +++ b/drivers/ide/ide-cs.c @@ -43,7 +43,6 @@ #include <asm/io.h> #include <asm/system.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/ds.h> #include <pcmcia/cisreg.h> @@ -99,7 +98,7 @@ static int ide_probe(struct pcmcia_device *link) link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; link->resource[1]->flags |= IO_DATA_PATH_WIDTH_8; - link->conf.Attributes = CONF_ENABLE_IRQ; + link->config_flags |= CONF_ENABLE_IRQ; return ide_config(link); } /* ide_attach */ @@ -284,7 +283,8 @@ static int ide_config(struct pcmcia_device *link) if (!link->irq) goto failed; - ret = pcmcia_request_configuration(link, &link->conf); + + ret = pcmcia_enable_device(link); if (ret) goto failed; diff --git a/drivers/isdn/hardware/avm/avm_cs.c b/drivers/isdn/hardware/avm/avm_cs.c index 2d8bbbf286aa..6ea5cd28d349 100644 --- a/drivers/isdn/hardware/avm/avm_cs.c +++ b/drivers/isdn/hardware/avm/avm_cs.c @@ -20,7 +20,6 @@ #include <asm/io.h> #include <asm/system.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/ciscode.h> #include <pcmcia/ds.h> @@ -79,7 +78,7 @@ static int avmcs_probe(struct pcmcia_device *p_dev) p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; /* General socket configuration */ - p_dev->conf.Attributes = CONF_ENABLE_IRQ; + p_dev->config_flags |= CONF_ENABLE_IRQ; p_dev->config_index = 1; p_dev->config_regs = PRESENT_OPTION; @@ -149,7 +148,7 @@ static int avmcs_config(struct pcmcia_device *link) /* * configure the PCMCIA socket */ - i = pcmcia_request_configuration(link, &link->conf); + i = pcmcia_enable_device(link); if (i != 0) { pcmcia_disable_device(link); break; diff --git a/drivers/isdn/hisax/avma1_cs.c b/drivers/isdn/hisax/avma1_cs.c index e25f6c7376ed..5dd47ad6ecc9 100644 --- a/drivers/isdn/hisax/avma1_cs.c +++ b/drivers/isdn/hisax/avma1_cs.c @@ -20,7 +20,6 @@ #include <asm/io.h> #include <asm/system.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/ds.h> #include "hisax_cfg.h" @@ -84,7 +83,7 @@ static int __devinit avma1cs_probe(struct pcmcia_device *p_dev) p_dev->resource[1]->flags |= IO_DATA_PATH_WIDTH_16; /* General socket configuration */ - p_dev->conf.Attributes = CONF_ENABLE_IRQ; + p_dev->config_flags |= CONF_ENABLE_IRQ; p_dev->config_index = 1; p_dev->config_regs = PRESENT_OPTION; @@ -160,7 +159,7 @@ static int __devinit avma1cs_config(struct pcmcia_device *link) /* * configure the PCMCIA socket */ - i = pcmcia_request_configuration(link, &link->conf); + i = pcmcia_enable_device(link); if (i != 0) { pcmcia_disable_device(link); break; diff --git a/drivers/isdn/hisax/elsa_cs.c b/drivers/isdn/hisax/elsa_cs.c index f276e8428960..368c8a213f0b 100644 --- a/drivers/isdn/hisax/elsa_cs.c +++ b/drivers/isdn/hisax/elsa_cs.c @@ -46,7 +46,6 @@ #include <asm/io.h> #include <asm/system.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/cisreg.h> #include <pcmcia/ds.h> @@ -129,8 +128,6 @@ static int __devinit elsa_cs_probe(struct pcmcia_device *link) link->resource[0]->end = 8; link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; - link->conf.Attributes = CONF_ENABLE_IRQ; - return elsa_cs_config(link); } /* elsa_cs_attach */ @@ -205,15 +202,14 @@ static int __devinit elsa_cs_config(struct pcmcia_device *link) if (!link->irq) goto failed; - i = pcmcia_request_configuration(link, &link->conf); + i = pcmcia_enable_device(link); if (i != 0) goto failed; /* Finally, report what we've done */ dev_info(&link->dev, "index 0x%02x: ", link->config_index); - if (link->conf.Attributes & CONF_ENABLE_IRQ) - printk(", irq %d", link->irq); + printk(", irq %d", link->irq); if (link->resource[0]) printk(" & %pR", link->resource[0]); if (link->resource[1]) diff --git a/drivers/isdn/hisax/sedlbauer_cs.c b/drivers/isdn/hisax/sedlbauer_cs.c index 43d0a4e97ead..791e23a75f78 100644 --- a/drivers/isdn/hisax/sedlbauer_cs.c +++ b/drivers/isdn/hisax/sedlbauer_cs.c @@ -46,7 +46,6 @@ #include <asm/io.h> #include <asm/system.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/cisreg.h> #include <pcmcia/ds.h> @@ -132,8 +131,6 @@ static int __devinit sedlbauer_probe(struct pcmcia_device *link) link->resource[0]->end = 8; link->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; - link->conf.Attributes = 0; - return sedlbauer_config(link); } /* sedlbauer_attach */ @@ -175,7 +172,7 @@ static int sedlbauer_config_check(struct pcmcia_device *p_dev, /* Does this card need audio output? */ if (cfg->flags & CISTPL_CFTABLE_AUDIO) - p_dev->conf.Attributes |= CONF_ENABLE_SPKR; + p_dev->config_flags |= CONF_ENABLE_SPKR; /* Use power settings for Vcc and Vpp if present */ /* Note that the CIS values need to be rescaled */ @@ -192,7 +189,7 @@ static int sedlbauer_config_check(struct pcmcia_device *p_dev, else if (dflt->vpp1.present & (1<<CISTPL_POWER_VNOM)) p_dev->vpp = dflt->vpp1.param[CISTPL_POWER_VNOM]/10000; - p_dev->conf.Attributes |= CONF_ENABLE_IRQ; + p_dev->config_flags |= CONF_ENABLE_IRQ; /* IO window settings */ p_dev->resource[0]->end = p_dev->resource[1]->end = 0; @@ -247,7 +244,7 @@ static int __devinit sedlbauer_config(struct pcmcia_device *link) the I/O windows and the interrupt mapping, and putting the card and host interface into "Memory and IO" mode. */ - ret = pcmcia_request_configuration(link, &link->conf); + ret = pcmcia_enable_device(link); if (ret) goto failed; @@ -256,8 +253,7 @@ static int __devinit sedlbauer_config(struct pcmcia_device *link) link->config_index); if (link->vpp) printk(", Vpp %d.%d", link->vpp/10, link->vpp%10); - if (link->conf.Attributes & CONF_ENABLE_IRQ) - printk(", irq %d", link->irq); + printk(", irq %d", link->irq); if (link->resource[0]) printk(" & %pR", link->resource[0]); if (link->resource[1]) diff --git a/drivers/isdn/hisax/teles_cs.c b/drivers/isdn/hisax/teles_cs.c index 614afc64b5b1..2ae71e3297ba 100644 --- a/drivers/isdn/hisax/teles_cs.c +++ b/drivers/isdn/hisax/teles_cs.c @@ -27,7 +27,6 @@ #include <asm/io.h> #include <asm/system.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/cisreg.h> #include <pcmcia/ds.h> @@ -109,7 +108,7 @@ static int __devinit teles_probe(struct pcmcia_device *link) link->resource[0]->end = 96; link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; - link->conf.Attributes = CONF_ENABLE_IRQ; + link->config_flags |= CONF_ENABLE_IRQ; return teles_cs_config(link); } /* teles_attach */ @@ -185,15 +184,14 @@ static int __devinit teles_cs_config(struct pcmcia_device *link) if (!link->irq) goto cs_failed; - i = pcmcia_request_configuration(link, &link->conf); + i = pcmcia_enable_device(link); if (i != 0) goto cs_failed; /* Finally, report what we've done */ dev_info(&link->dev, "index 0x%02x:", link->config_index); - if (link->conf.Attributes & CONF_ENABLE_IRQ) - printk(", irq %d", link->irq); + printk(", irq %d", link->irq); if (link->resource[0]) printk(" & %pR", link->resource[0]); if (link->resource[1]) diff --git a/drivers/mmc/host/sdricoh_cs.c b/drivers/mmc/host/sdricoh_cs.c index 7aa65bb2af4a..7a7273b09d9a 100644 --- a/drivers/mmc/host/sdricoh_cs.c +++ b/drivers/mmc/host/sdricoh_cs.c @@ -30,7 +30,6 @@ #include <linux/ioport.h> #include <linux/scatterlist.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/ds.h> #include <linux/io.h> diff --git a/drivers/mtd/maps/pcmciamtd.c b/drivers/mtd/maps/pcmciamtd.c index 99c7257363d6..388db9ecf222 100644 --- a/drivers/mtd/maps/pcmciamtd.c +++ b/drivers/mtd/maps/pcmciamtd.c @@ -16,7 +16,6 @@ #include <asm/io.h> #include <asm/system.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/ds.h> @@ -568,7 +567,6 @@ static int pcmciamtd_config(struct pcmcia_device *link) dev->pcmcia_map.map_priv_2 = (unsigned long)link->resource[2]; dev->vpp = (vpp) ? vpp : link->socket->socket.Vpp; - link->conf.Attributes = 0; if(setvpp == 2) { link->vpp = dev->vpp; } else { @@ -577,7 +575,7 @@ static int pcmciamtd_config(struct pcmcia_device *link) link->config_index = 0; DEBUG(2, "Setting Configuration"); - ret = pcmcia_request_configuration(link, &link->conf); + ret = pcmcia_enable_device(link); if (ret != 0) { if (dev->win_base) { iounmap(dev->win_base); @@ -718,8 +716,6 @@ static int pcmciamtd_probe(struct pcmcia_device *link) dev->p_dev = link; link->priv = dev; - link->conf.Attributes = 0; - return pcmciamtd_config(link); } diff --git a/drivers/net/pcmcia/3c574_cs.c b/drivers/net/pcmcia/3c574_cs.c index 4b670b3da378..8abce76367f8 100644 --- a/drivers/net/pcmcia/3c574_cs.c +++ b/drivers/net/pcmcia/3c574_cs.c @@ -87,7 +87,6 @@ earlier 3Com products. #include <linux/bitops.h> #include <linux/mii.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/cisreg.h> #include <pcmcia/ciscode.h> @@ -280,7 +279,7 @@ static int tc574_probe(struct pcmcia_device *link) spin_lock_init(&lp->window_lock); link->resource[0]->end = 32; link->resource[0]->flags |= IO_DATA_PATH_WIDTH_16; - link->conf.Attributes = CONF_ENABLE_IRQ; + link->config_flags |= CONF_ENABLE_IRQ; link->config_index = 1; dev->netdev_ops = &el3_netdev_ops; @@ -351,7 +350,7 @@ static int tc574_config(struct pcmcia_device *link) if (ret) goto failed; - ret = pcmcia_request_configuration(link, &link->conf); + ret = pcmcia_enable_device(link); if (ret) goto failed; diff --git a/drivers/net/pcmcia/3c589_cs.c b/drivers/net/pcmcia/3c589_cs.c index 6549e2c496a0..34195c407fb2 100644 --- a/drivers/net/pcmcia/3c589_cs.c +++ b/drivers/net/pcmcia/3c589_cs.c @@ -41,7 +41,6 @@ #include <linux/bitops.h> #include <linux/jiffies.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/cisreg.h> #include <pcmcia/ciscode.h> @@ -216,7 +215,7 @@ static int tc589_probe(struct pcmcia_device *link) link->resource[0]->end = 16; link->resource[0]->flags |= IO_DATA_PATH_WIDTH_16; - link->conf.Attributes = CONF_ENABLE_IRQ; + link->config_flags |= CONF_ENABLE_IRQ; link->config_index = 1; dev->netdev_ops = &el3_netdev_ops; @@ -293,7 +292,7 @@ static int tc589_config(struct pcmcia_device *link) if (ret) goto failed; - ret = pcmcia_request_configuration(link, &link->conf); + ret = pcmcia_enable_device(link); if (ret) goto failed; diff --git a/drivers/net/pcmcia/axnet_cs.c b/drivers/net/pcmcia/axnet_cs.c index 2c273ce6a5d8..f361d2865e34 100644 --- a/drivers/net/pcmcia/axnet_cs.c +++ b/drivers/net/pcmcia/axnet_cs.c @@ -39,7 +39,6 @@ #include <linux/mii.h> #include "../8390.h" -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/ciscode.h> #include <pcmcia/ds.h> @@ -166,7 +165,7 @@ static int axnet_probe(struct pcmcia_device *link) info = PRIV(dev); info->p_dev = link; link->priv = dev; - link->conf.Attributes = CONF_ENABLE_IRQ; + link->config_flags |= CONF_ENABLE_IRQ; dev->netdev_ops = &axnet_netdev_ops; @@ -332,11 +331,12 @@ static int axnet_config(struct pcmcia_device *link) if (!link->irq) goto failed; - + + link->config_flags |= CONF_ENABLE_IRQ; if (resource_size(link->resource[1]) == 8) - link->conf.Attributes |= CONF_ENABLE_SPKR; + link->config_flags |= CONF_ENABLE_SPKR; - ret = pcmcia_request_configuration(link, &link->conf); + ret = pcmcia_enable_device(link); if (ret) goto failed; diff --git a/drivers/net/pcmcia/com20020_cs.c b/drivers/net/pcmcia/com20020_cs.c index a58eafed42a5..039731bddc27 100644 --- a/drivers/net/pcmcia/com20020_cs.c +++ b/drivers/net/pcmcia/com20020_cs.c @@ -43,7 +43,6 @@ #include <linux/arcdevice.h> #include <linux/com20020.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/ds.h> @@ -160,7 +159,7 @@ static int com20020_probe(struct pcmcia_device *p_dev) p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; p_dev->resource[0]->end = 16; - p_dev->conf.Attributes = CONF_ENABLE_IRQ; + p_dev->config_flags |= CONF_ENABLE_IRQ; info->dev = dev; p_dev->priv = info; @@ -281,7 +280,7 @@ static int com20020_config(struct pcmcia_device *link) dev->irq = link->irq; - ret = pcmcia_request_configuration(link, &link->conf); + ret = pcmcia_enable_device(link); if (ret) goto failed; diff --git a/drivers/net/pcmcia/fmvj18x_cs.c b/drivers/net/pcmcia/fmvj18x_cs.c index 23f5333d8029..f6865adb126d 100644 --- a/drivers/net/pcmcia/fmvj18x_cs.c +++ b/drivers/net/pcmcia/fmvj18x_cs.c @@ -49,7 +49,6 @@ #include <linux/ioport.h> #include <linux/crc32.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/ciscode.h> #include <pcmcia/ds.h> @@ -252,7 +251,7 @@ static int fmvj18x_probe(struct pcmcia_device *link) link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; /* General socket configuration */ - link->conf.Attributes = CONF_ENABLE_IRQ; + link->config_flags |= CONF_ENABLE_IRQ; dev->netdev_ops = &fjn_netdev_ops; dev->watchdog_timeo = TX_TIMEOUT; @@ -431,7 +430,7 @@ static int fmvj18x_config(struct pcmcia_device *link) ret = pcmcia_request_irq(link, fjn_interrupt); if (ret) goto failed; - ret = pcmcia_request_configuration(link, &link->conf); + ret = pcmcia_enable_device(link); if (ret) goto failed; diff --git a/drivers/net/pcmcia/ibmtr_cs.c b/drivers/net/pcmcia/ibmtr_cs.c index feedeeb17a52..b298a3d98dc8 100644 --- a/drivers/net/pcmcia/ibmtr_cs.c +++ b/drivers/net/pcmcia/ibmtr_cs.c @@ -57,7 +57,6 @@ #include <linux/trdevice.h> #include <linux/ibmtr.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/ds.h> @@ -152,7 +151,7 @@ static int __devinit ibmtr_attach(struct pcmcia_device *link) link->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; link->resource[0]->end = 4; - link->conf.Attributes = CONF_ENABLE_IRQ; + link->config_flags |= CONF_ENABLE_IRQ; link->config_regs = PRESENT_OPTION; info->dev = dev; @@ -269,7 +268,7 @@ static int __devinit ibmtr_config(struct pcmcia_device *link) resource_size(link->resource[3])); ti->sram_phys = link->resource[3]->start; - ret = pcmcia_request_configuration(link, &link->conf); + ret = pcmcia_enable_device(link); if (ret) goto failed; diff --git a/drivers/net/pcmcia/nmclan_cs.c b/drivers/net/pcmcia/nmclan_cs.c index 98c4a6976045..51bf76de6499 100644 --- a/drivers/net/pcmcia/nmclan_cs.c +++ b/drivers/net/pcmcia/nmclan_cs.c @@ -146,7 +146,6 @@ Include Files #include <linux/ioport.h> #include <linux/bitops.h> -#include <pcmcia/cs.h> #include <pcmcia/cisreg.h> #include <pcmcia/cistpl.h> #include <pcmcia/ds.h> @@ -460,7 +459,7 @@ static int nmclan_probe(struct pcmcia_device *link) spin_lock_init(&lp->bank_lock); link->resource[0]->end = 32; link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; - link->conf.Attributes = CONF_ENABLE_IRQ; + link->config_flags |= CONF_ENABLE_IRQ; link->config_index = 1; link->config_regs = PRESENT_OPTION; @@ -649,7 +648,7 @@ static int nmclan_config(struct pcmcia_device *link) ret = pcmcia_request_exclusive_irq(link, mace_interrupt); if (ret) goto failed; - ret = pcmcia_request_configuration(link, &link->conf); + ret = pcmcia_enable_device(link); if (ret) goto failed; diff --git a/drivers/net/pcmcia/pcnet_cs.c b/drivers/net/pcmcia/pcnet_cs.c index 68c46751f84f..4a3b6a43550f 100644 --- a/drivers/net/pcmcia/pcnet_cs.c +++ b/drivers/net/pcmcia/pcnet_cs.c @@ -42,7 +42,6 @@ #include <linux/mii.h> #include "../8390.h" -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/ciscode.h> #include <pcmcia/ds.h> @@ -260,7 +259,7 @@ static int pcnet_probe(struct pcmcia_device *link) info->p_dev = link; link->priv = dev; - link->conf.Attributes = CONF_ENABLE_IRQ; + link->config_flags |= CONF_ENABLE_IRQ; dev->netdev_ops = &pcnet_netdev_ops; @@ -560,13 +559,13 @@ static hw_info_t *pcnet_try_config(struct pcmcia_device *link, return NULL; if (resource_size(link->resource[1]) == 8) - link->conf.Attributes |= CONF_ENABLE_SPKR; + link->config_flags |= CONF_ENABLE_SPKR; if ((link->manf_id == MANFID_IBM) && (link->card_id == PRODID_IBM_HOME_AND_AWAY)) link->config_index |= 0x10; - ret = pcmcia_request_configuration(link, &link->conf); + ret = pcmcia_enable_device(link); if (ret) return NULL; diff --git a/drivers/net/pcmcia/smc91c92_cs.c b/drivers/net/pcmcia/smc91c92_cs.c index 59f5034e8d93..8c16ba672012 100644 --- a/drivers/net/pcmcia/smc91c92_cs.c +++ b/drivers/net/pcmcia/smc91c92_cs.c @@ -44,7 +44,6 @@ #include <linux/jiffies.h> #include <linux/firmware.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/cisreg.h> #include <pcmcia/ciscode.h> @@ -326,7 +325,7 @@ static int smc91c92_probe(struct pcmcia_device *link) spin_lock_init(&smc->lock); link->resource[0]->end = 16; link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; - link->conf.Attributes = CONF_ENABLE_IRQ; + link->config_flags |= CONF_ENABLE_IRQ; /* The SMC91c92-specific entries in the device structure. */ dev->netdev_ops = &smc_netdev_ops; @@ -444,7 +443,7 @@ static int mhz_mfc_config(struct pcmcia_device *link) unsigned int offset; int i; - link->conf.Attributes |= CONF_ENABLE_SPKR; + link->config_flags |= CONF_ENABLE_SPKR; link->resource[1]->flags |= IO_DATA_PATH_WIDTH_8; link->resource[1]->end = 8; @@ -637,7 +636,7 @@ static int osi_config(struct pcmcia_device *link) static const unsigned int com[4] = { 0x3f8, 0x2f8, 0x3e8, 0x2e8 }; int i, j; - link->conf.Attributes |= CONF_ENABLE_SPKR; + link->config_flags |= CONF_ENABLE_SPKR; link->resource[0]->end = 64; link->resource[1]->flags |= IO_DATA_PATH_WIDTH_8; link->resource[1]->end = 8; @@ -862,7 +861,7 @@ static int smc91c92_config(struct pcmcia_device *link) i = pcmcia_request_irq(link, smc_interrupt); if (i) goto config_failed; - i = pcmcia_request_configuration(link, &link->conf); + i = pcmcia_enable_device(link); if (i) goto config_failed; diff --git a/drivers/net/pcmcia/xirc2ps_cs.c b/drivers/net/pcmcia/xirc2ps_cs.c index 1c8ebf2df0c0..7a4a99b73d17 100644 --- a/drivers/net/pcmcia/xirc2ps_cs.c +++ b/drivers/net/pcmcia/xirc2ps_cs.c @@ -82,7 +82,6 @@ #include <linux/bitops.h> #include <linux/mii.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/cisreg.h> #include <pcmcia/ciscode.h> @@ -529,7 +528,7 @@ xirc2ps_probe(struct pcmcia_device *link) link->priv = dev; /* General socket configuration */ - link->conf.Attributes = CONF_ENABLE_IRQ; + link->config_flags |= CONF_ENABLE_IRQ; link->config_index = 1; /* Fill in card specific entries */ @@ -811,9 +810,6 @@ xirc2ps_config(struct pcmcia_device * link) if (local->modem) { int pass; - if (do_sound) - link->conf.Attributes |= CONF_ENABLE_SPKR; - link->resource[1]->end = 8; link->resource[1]->flags |= IO_DATA_PATH_WIDTH_8; if (local->dingo) { @@ -863,7 +859,11 @@ xirc2ps_config(struct pcmcia_device * link) * This actually configures the PCMCIA socket -- setting up * the I/O windows and the interrupt mapping. */ - if ((err=pcmcia_request_configuration(link, &link->conf))) + link->config_flags |= CONF_ENABLE_IRQ; + if (do_sound) + link->config_flags |= CONF_ENABLE_SPKR; + + if ((err = pcmcia_enable_device(link))) goto config_error; if (local->dingo) { diff --git a/drivers/net/wireless/airo_cs.c b/drivers/net/wireless/airo_cs.c index 40f9ed760bb3..5939d0c7a5c8 100644 --- a/drivers/net/wireless/airo_cs.c +++ b/drivers/net/wireless/airo_cs.c @@ -32,7 +32,6 @@ #include <linux/timer.h> #include <linux/netdevice.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/cisreg.h> #include <pcmcia/ds.h> @@ -96,15 +95,6 @@ static int airo_probe(struct pcmcia_device *p_dev) dev_dbg(&p_dev->dev, "airo_attach()\n"); - /* - General socket configuration defaults can go here. In this - client, we assume very little, and rely on the CIS for almost - everything. In most clients, many details (i.e., number, sizes, - and attributes of IO windows) are fixed by the nature of the - device, and can be hard-wired here. - */ - p_dev->conf.Attributes = 0; - /* Allocate space for private device-specific data */ local = kzalloc(sizeof(local_info_t), GFP_KERNEL); if (!local) { @@ -158,7 +148,7 @@ static int airo_cs_config_check(struct pcmcia_device *p_dev, /* Does this card need audio output? */ if (cfg->flags & CISTPL_CFTABLE_AUDIO) - p_dev->conf.Attributes |= CONF_ENABLE_SPKR; + p_dev->config_flags |= CONF_ENABLE_SPKR; /* Use power settings for Vcc and Vpp if present */ /* Note that the CIS values need to be rescaled */ @@ -167,7 +157,7 @@ static int airo_cs_config_check(struct pcmcia_device *p_dev, else if (dflt->vpp1.present & (1<<CISTPL_POWER_VNOM)) p_dev->vpp = dflt->vpp1.param[CISTPL_POWER_VNOM]/10000; - p_dev->conf.Attributes |= CONF_ENABLE_IRQ; + p_dev->config_flags |= CONF_ENABLE_IRQ; /* IO window settings */ p_dev->resource[0]->end = p_dev->resource[1]->end = 0; @@ -229,7 +219,7 @@ static int airo_config(struct pcmcia_device *link) the I/O windows and the interrupt mapping, and putting the card and host interface into "Memory and IO" mode. */ - ret = pcmcia_request_configuration(link, &link->conf); + ret = pcmcia_enable_device(link); if (ret) goto failed; ((local_info_t *)link->priv)->eth_dev = diff --git a/drivers/net/wireless/atmel_cs.c b/drivers/net/wireless/atmel_cs.c index 8b75158caed7..080266eba985 100644 --- a/drivers/net/wireless/atmel_cs.c +++ b/drivers/net/wireless/atmel_cs.c @@ -42,7 +42,6 @@ #include <linux/moduleparam.h> #include <linux/device.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/cisreg.h> #include <pcmcia/ds.h> @@ -106,15 +105,6 @@ static int atmel_probe(struct pcmcia_device *p_dev) dev_dbg(&p_dev->dev, "atmel_attach()\n"); - /* - General socket configuration defaults can go here. In this - client, we assume very little, and rely on the CIS for almost - everything. In most clients, many details (i.e., number, sizes, - and attributes of IO windows) are fixed by the nature of the - device, and can be hard-wired here. - */ - p_dev->conf.Attributes = 0; - /* Allocate space for private device-specific data */ local = kzalloc(sizeof(local_info_t), GFP_KERNEL); if (!local) { @@ -175,7 +165,7 @@ static int atmel_config_check(struct pcmcia_device *p_dev, /* Does this card need audio output? */ if (cfg->flags & CISTPL_CFTABLE_AUDIO) - p_dev->conf.Attributes |= CONF_ENABLE_SPKR; + p_dev->config_flags |= CONF_ENABLE_SPKR; /* Use power settings for Vcc and Vpp if present */ /* Note that the CIS values need to be rescaled */ @@ -184,7 +174,7 @@ static int atmel_config_check(struct pcmcia_device *p_dev, else if (dflt->vpp1.present & (1<<CISTPL_POWER_VNOM)) p_dev->vpp = dflt->vpp1.param[CISTPL_POWER_VNOM]/10000; - p_dev->conf.Attributes |= CONF_ENABLE_IRQ; + p_dev->config_flags |= CONF_ENABLE_IRQ; /* IO window settings */ p_dev->resource[0]->end = p_dev->resource[1]->end = 0; @@ -242,7 +232,7 @@ static int atmel_config(struct pcmcia_device *link) the I/O windows and the interrupt mapping, and putting the card and host interface into "Memory and IO" mode. */ - ret = pcmcia_request_configuration(link, &link->conf); + ret = pcmcia_enable_device(link); if (ret) goto failed; diff --git a/drivers/net/wireless/b43/pcmcia.c b/drivers/net/wireless/b43/pcmcia.c index 138b26fcc75c..61abab1f1c7c 100644 --- a/drivers/net/wireless/b43/pcmcia.c +++ b/drivers/net/wireless/b43/pcmcia.c @@ -26,7 +26,6 @@ #include <linux/ssb/ssb.h> #include <linux/slab.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/ciscode.h> #include <pcmcia/ds.h> @@ -72,7 +71,7 @@ static int __devinit b43_pcmcia_probe(struct pcmcia_device *dev) err = -ENODEV; - dev->conf.Attributes = CONF_ENABLE_IRQ; + dev->config_flags |= CONF_ENABLE_IRQ; dev->resource[2]->flags |= WIN_ENABLE | WIN_DATA_WIDTH_16 | WIN_USE_WAIT; @@ -89,7 +88,7 @@ static int __devinit b43_pcmcia_probe(struct pcmcia_device *dev) if (!dev->irq) goto err_disable; - res = pcmcia_request_configuration(dev, &dev->conf); + res = pcmcia_enable_device(dev); if (res != 0) goto err_disable; diff --git a/drivers/net/wireless/hostap/hostap_cs.c b/drivers/net/wireless/hostap/hostap_cs.c index 5704d3f9e1b7..5b0b5828b3cf 100644 --- a/drivers/net/wireless/hostap/hostap_cs.c +++ b/drivers/net/wireless/hostap/hostap_cs.c @@ -12,7 +12,6 @@ #include <linux/wireless.h> #include <net/iw_handler.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/cisreg.h> #include <pcmcia/ds.h> @@ -484,7 +483,7 @@ static int prism2_config_check(struct pcmcia_device *p_dev, /* Does this card need audio output? */ if (cfg->flags & CISTPL_CFTABLE_AUDIO) - p_dev->conf.Attributes |= CONF_ENABLE_SPKR; + p_dev->config_flags |= CONF_ENABLE_SPKR; /* Use power settings for Vcc and Vpp if present */ /* Note that the CIS values need to be rescaled */ @@ -510,7 +509,7 @@ static int prism2_config_check(struct pcmcia_device *p_dev, p_dev->vpp = dflt->vpp1.param[CISTPL_POWER_VNOM] / 10000; /* Do we need to allocate an interrupt? */ - p_dev->conf.Attributes |= CONF_ENABLE_IRQ; + p_dev->config_flags |= CONF_ENABLE_IRQ; /* IO window settings */ PDEBUG(DEBUG_EXTRA, "IO window settings: cfg->io.nwin=%d " @@ -590,7 +589,7 @@ static int prism2_config(struct pcmcia_device *link) * the I/O windows and the interrupt mapping, and putting the * card and host interface into "Memory and IO" mode. */ - ret = pcmcia_request_configuration(link, &link->conf); + ret = pcmcia_enable_device(link); if (ret) goto failed_unlock; @@ -605,8 +604,7 @@ static int prism2_config(struct pcmcia_device *link) if (link->vpp) printk(", Vpp %d.%d", link->vpp / 10, link->vpp % 10); - if (link->conf.Attributes & CONF_ENABLE_IRQ) - printk(", irq %d", link->irq); + printk(", irq %d", link->irq); if (link->resource[0]) printk(" & %pR", link->resource[0]); if (link->resource[1]) diff --git a/drivers/net/wireless/libertas/if_cs.c b/drivers/net/wireless/libertas/if_cs.c index 814b7faaa365..6020c19b1bdb 100644 --- a/drivers/net/wireless/libertas/if_cs.c +++ b/drivers/net/wireless/libertas/if_cs.c @@ -28,7 +28,6 @@ #include <linux/firmware.h> #include <linux/netdevice.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/ds.h> @@ -806,7 +805,7 @@ static int if_cs_ioprobe(struct pcmcia_device *p_dev, p_dev->resource[0]->end = cfg->io.win[0].len; /* Do we need to allocate an interrupt? */ - p_dev->conf.Attributes |= CONF_ENABLE_IRQ; + p_dev->config_flags |= CONF_ENABLE_IRQ; /* IO window settings */ if (cfg->io.nwin != 1) { @@ -835,14 +834,11 @@ static int if_cs_probe(struct pcmcia_device *p_dev) card->p_dev = p_dev; p_dev->priv = card; - p_dev->conf.Attributes = 0; - if (pcmcia_loop_config(p_dev, if_cs_ioprobe, NULL)) { lbs_pr_err("error in pcmcia_loop_config\n"); goto out1; } - /* * Allocate an interrupt line. Note that this does not assign * a handler to the interrupt, unless the 'Handler' member of @@ -865,9 +861,9 @@ static int if_cs_probe(struct pcmcia_device *p_dev) * the I/O windows and the interrupt mapping, and putting the * card and host interface into "Memory and IO" mode. */ - ret = pcmcia_request_configuration(p_dev, &p_dev->conf); + ret = pcmcia_enable_device(p_dev); if (ret) { - lbs_pr_err("error in pcmcia_request_configuration\n"); + lbs_pr_err("error in pcmcia_enable_device\n"); goto out2; } diff --git a/drivers/net/wireless/orinoco/orinoco_cs.c b/drivers/net/wireless/orinoco/orinoco_cs.c index 1147d6bd4733..00316a1a1092 100644 --- a/drivers/net/wireless/orinoco/orinoco_cs.c +++ b/drivers/net/wireless/orinoco/orinoco_cs.c @@ -17,7 +17,6 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/delay.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/cisreg.h> #include <pcmcia/ds.h> @@ -117,13 +116,6 @@ orinoco_cs_probe(struct pcmcia_device *link) card->p_dev = link; link->priv = priv; - /* General socket configuration defaults can go here. In this - * client, we assume very little, and rely on the CIS for - * almost everything. In most clients, many details (i.e., - * number, sizes, and attributes of IO windows) are fixed by - * the nature of the device, and can be hard-wired here. */ - link->conf.Attributes = 0; - return orinoco_cs_config(link); } /* orinoco_cs_attach */ @@ -187,7 +179,7 @@ static int orinoco_cs_config_check(struct pcmcia_device *p_dev, dflt->vpp1.param[CISTPL_POWER_VNOM] / 10000; /* Do we need to allocate an interrupt? */ - p_dev->conf.Attributes |= CONF_ENABLE_IRQ; + p_dev->config_flags |= CONF_ENABLE_IRQ; /* IO window settings */ p_dev->resource[0]->end = p_dev->resource[1]->end = 0; @@ -266,7 +258,7 @@ orinoco_cs_config(struct pcmcia_device *link) * the I/O windows and the interrupt mapping, and putting the * card and host interface into "Memory and IO" mode. */ - ret = pcmcia_request_configuration(link, &link->conf); + ret = pcmcia_enable_device(link); if (ret) goto failed; diff --git a/drivers/net/wireless/orinoco/spectrum_cs.c b/drivers/net/wireless/orinoco/spectrum_cs.c index 20b08ab87655..ca2c6c0c5576 100644 --- a/drivers/net/wireless/orinoco/spectrum_cs.c +++ b/drivers/net/wireless/orinoco/spectrum_cs.c @@ -25,7 +25,6 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/delay.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/cisreg.h> #include <pcmcia/ds.h> @@ -179,13 +178,6 @@ spectrum_cs_probe(struct pcmcia_device *link) card->p_dev = link; link->priv = priv; - /* General socket configuration defaults can go here. In this - * client, we assume very little, and rely on the CIS for - * almost everything. In most clients, many details (i.e., - * number, sizes, and attributes of IO windows) are fixed by - * the nature of the device, and can be hard-wired here. */ - link->conf.Attributes = 0; - return spectrum_cs_config(link); } /* spectrum_cs_attach */ @@ -249,7 +241,7 @@ static int spectrum_cs_config_check(struct pcmcia_device *p_dev, dflt->vpp1.param[CISTPL_POWER_VNOM] / 10000; /* Do we need to allocate an interrupt? */ - p_dev->conf.Attributes |= CONF_ENABLE_IRQ; + p_dev->config_flags |= CONF_ENABLE_IRQ; /* IO window settings */ p_dev->resource[0]->end = p_dev->resource[1]->end = 0; @@ -329,7 +321,7 @@ spectrum_cs_config(struct pcmcia_device *link) * the I/O windows and the interrupt mapping, and putting the * card and host interface into "Memory and IO" mode. */ - ret = pcmcia_request_configuration(link, &link->conf); + ret = pcmcia_enable_device(link); if (ret) goto failed; diff --git a/drivers/net/wireless/ray_cs.c b/drivers/net/wireless/ray_cs.c index 7fb66cc1e9fd..1457f34efa9a 100644 --- a/drivers/net/wireless/ray_cs.c +++ b/drivers/net/wireless/ray_cs.c @@ -46,7 +46,6 @@ #include <linux/ethtool.h> #include <linux/ieee80211.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/cisreg.h> #include <pcmcia/ds.h> @@ -318,7 +317,7 @@ static int ray_probe(struct pcmcia_device *p_dev) p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; /* General socket configuration */ - p_dev->conf.Attributes = CONF_ENABLE_IRQ; + p_dev->config_flags |= CONF_ENABLE_IRQ; p_dev->config_index = 1; p_dev->priv = dev; @@ -413,7 +412,7 @@ static int ray_config(struct pcmcia_device *link) /* This actually configures the PCMCIA socket -- setting up the I/O windows and the interrupt mapping. */ - ret = pcmcia_request_configuration(link, &link->conf); + ret = pcmcia_enable_device(link); if (ret) goto failed; diff --git a/drivers/net/wireless/wl3501_cs.c b/drivers/net/wireless/wl3501_cs.c index 3947cf8e63c5..101b6ffd560e 100644 --- a/drivers/net/wireless/wl3501_cs.c +++ b/drivers/net/wireless/wl3501_cs.c @@ -48,7 +48,6 @@ #include <net/iw_handler.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/cisreg.h> #include <pcmcia/ds.h> @@ -1888,7 +1887,7 @@ static int wl3501_probe(struct pcmcia_device *p_dev) p_dev->resource[0]->flags = IO_DATA_PATH_WIDTH_8; /* General socket configuration */ - p_dev->conf.Attributes = CONF_ENABLE_IRQ; + p_dev->config_flags = CONF_ENABLE_IRQ; p_dev->config_index = 1; dev = alloc_etherdev(sizeof(struct wl3501_card)); @@ -1954,7 +1953,7 @@ static int wl3501_config(struct pcmcia_device *link) /* This actually configures the PCMCIA socket -- setting up the I/O * windows and the interrupt mapping. */ - ret = pcmcia_request_configuration(link, &link->conf); + ret = pcmcia_enable_device(link); if (ret) goto failed; diff --git a/drivers/parport/parport_cs.c b/drivers/parport/parport_cs.c index 8faf634987e3..63b3d3c18c34 100644 --- a/drivers/parport/parport_cs.c +++ b/drivers/parport/parport_cs.c @@ -48,7 +48,6 @@ #include <linux/parport.h> #include <linux/parport_pc.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/ds.h> #include <pcmcia/cisreg.h> @@ -103,7 +102,7 @@ static int parport_probe(struct pcmcia_device *link) link->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; link->resource[1]->flags |= IO_DATA_PATH_WIDTH_8; - link->conf.Attributes = CONF_ENABLE_IRQ; + link->config_flags |= CONF_ENABLE_IRQ; return parport_config(link); } /* parport_attach */ @@ -172,7 +171,7 @@ static int parport_config(struct pcmcia_device *link) if (!link->irq) goto failed; - ret = pcmcia_request_configuration(link, &link->conf); + ret = pcmcia_enable_device(link); if (ret) goto failed; diff --git a/drivers/pcmcia/au1000_generic.h b/drivers/pcmcia/au1000_generic.h index 67530cefcf3c..5c36bda2963b 100644 --- a/drivers/pcmcia/au1000_generic.h +++ b/drivers/pcmcia/au1000_generic.h @@ -23,7 +23,6 @@ /* include the world */ -#include <pcmcia/cs.h> #include <pcmcia/ss.h> #include <pcmcia/cistpl.h> #include "cs_internal.h" diff --git a/drivers/pcmcia/au1000_pb1x00.c b/drivers/pcmcia/au1000_pb1x00.c index 807f2d75dad3..b2396647a165 100644 --- a/drivers/pcmcia/au1000_pb1x00.c +++ b/drivers/pcmcia/au1000_pb1x00.c @@ -31,7 +31,6 @@ #include <linux/proc_fs.h> #include <linux/types.h> -#include <pcmcia/cs.h> #include <pcmcia/ss.h> #include <pcmcia/cistpl.h> diff --git a/drivers/pcmcia/cistpl.c b/drivers/pcmcia/cistpl.c index 91414a0ddc44..884a984216fe 100644 --- a/drivers/pcmcia/cistpl.c +++ b/drivers/pcmcia/cistpl.c @@ -28,7 +28,6 @@ #include <asm/unaligned.h> #include <pcmcia/ss.h> -#include <pcmcia/cs.h> #include <pcmcia/cisreg.h> #include <pcmcia/cistpl.h> #include "cs_internal.h" diff --git a/drivers/pcmcia/cs.c b/drivers/pcmcia/cs.c index 2ec8ac97445c..d8189d4061fc 100644 --- a/drivers/pcmcia/cs.c +++ b/drivers/pcmcia/cs.c @@ -33,7 +33,6 @@ #include <asm/irq.h> #include <pcmcia/ss.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/cisreg.h> #include <pcmcia/ds.h> diff --git a/drivers/pcmcia/cs_internal.h b/drivers/pcmcia/cs_internal.h index 42eef437afd4..7f1953f78b12 100644 --- a/drivers/pcmcia/cs_internal.h +++ b/drivers/pcmcia/cs_internal.h @@ -33,14 +33,9 @@ typedef struct config_t { struct kref ref; unsigned int state; - unsigned int Attributes; struct resource io[MAX_IO_WIN]; /* io ports */ struct resource mem[MAX_WIN]; /* mem areas */ - - struct { - u_int Attributes; - } irq; } config_t; diff --git a/drivers/pcmcia/ds.c b/drivers/pcmcia/ds.c index 00db60053f93..dd43bd33a9e3 100644 --- a/drivers/pcmcia/ds.c +++ b/drivers/pcmcia/ds.c @@ -26,7 +26,6 @@ #include <linux/dma-mapping.h> #include <linux/slab.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/ds.h> #include <pcmcia/ss.h> @@ -1178,7 +1177,7 @@ static int pcmcia_dev_resume(struct device *dev) if (p_dev->device_no == p_dev->func) { dev_dbg(dev, "requesting configuration\n"); - ret = pcmcia_request_configuration(p_dev, &p_dev->conf); + ret = pcmcia_enable_device(p_dev); if (ret) goto out; } diff --git a/drivers/pcmcia/i82092.c b/drivers/pcmcia/i82092.c index 05d0879ce935..fc7906eaf228 100644 --- a/drivers/pcmcia/i82092.c +++ b/drivers/pcmcia/i82092.c @@ -16,7 +16,6 @@ #include <linux/device.h> #include <pcmcia/ss.h> -#include <pcmcia/cs.h> #include <asm/system.h> #include <asm/io.h> diff --git a/drivers/pcmcia/i82365.c b/drivers/pcmcia/i82365.c index 61746bd598b3..72a033a2acdb 100644 --- a/drivers/pcmcia/i82365.c +++ b/drivers/pcmcia/i82365.c @@ -51,7 +51,6 @@ #include <asm/system.h> #include <pcmcia/ss.h> -#include <pcmcia/cs.h> #include <linux/isapnp.h> diff --git a/drivers/pcmcia/m32r_cfc.c b/drivers/pcmcia/m32r_cfc.c index 24de49925863..2adb0106a039 100644 --- a/drivers/pcmcia/m32r_cfc.c +++ b/drivers/pcmcia/m32r_cfc.c @@ -27,7 +27,6 @@ #include <asm/system.h> #include <pcmcia/ss.h> -#include <pcmcia/cs.h> #undef MAX_IO_WIN /* FIXME */ #define MAX_IO_WIN 1 diff --git a/drivers/pcmcia/m32r_pcc.c b/drivers/pcmcia/m32r_pcc.c index 8e4723844ad3..1511ff71c87b 100644 --- a/drivers/pcmcia/m32r_pcc.c +++ b/drivers/pcmcia/m32r_pcc.c @@ -28,7 +28,6 @@ #include <asm/addrspace.h> #include <pcmcia/ss.h> -#include <pcmcia/cs.h> /* XXX: should be moved into asm/irq.h */ #define PCC0_IRQ 24 diff --git a/drivers/pcmcia/m8xx_pcmcia.c b/drivers/pcmcia/m8xx_pcmcia.c index f0ecad99ce81..99d4f23cb435 100644 --- a/drivers/pcmcia/m8xx_pcmcia.c +++ b/drivers/pcmcia/m8xx_pcmcia.c @@ -59,7 +59,6 @@ #include <asm/irq.h> #include <asm/fs_pd.h> -#include <pcmcia/cs.h> #include <pcmcia/ss.h> #define pcmcia_info(args...) printk(KERN_INFO "m8xx_pcmcia: "args) diff --git a/drivers/pcmcia/pcmcia_cis.c b/drivers/pcmcia/pcmcia_cis.c index ac47cc4e20e8..ce8b94a3b675 100644 --- a/drivers/pcmcia/pcmcia_cis.c +++ b/drivers/pcmcia/pcmcia_cis.c @@ -22,7 +22,6 @@ #include <pcmcia/cisreg.h> #include <pcmcia/cistpl.h> #include <pcmcia/ss.h> -#include <pcmcia/cs.h> #include <pcmcia/ds.h> #include "cs_internal.h" diff --git a/drivers/pcmcia/pcmcia_resource.c b/drivers/pcmcia/pcmcia_resource.c index a1fb0dc1a71f..28de5e6e164c 100644 --- a/drivers/pcmcia/pcmcia_resource.c +++ b/drivers/pcmcia/pcmcia_resource.c @@ -26,7 +26,6 @@ #include <asm/irq.h> #include <pcmcia/ss.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/cisreg.h> #include <pcmcia/ds.h> @@ -230,7 +229,7 @@ EXPORT_SYMBOL(pcmcia_map_mem_page); * pcmcia_fixup_iowidth() - reduce io width to 8bit * * pcmcia_fixup_iowidth() allows a PCMCIA device driver to reduce the - * IO width to 8bit after having called pcmcia_request_configuration() + * IO width to 8bit after having called pcmcia_enable_device() * previously. */ int pcmcia_fixup_iowidth(struct pcmcia_device *p_dev) @@ -278,7 +277,7 @@ EXPORT_SYMBOL(pcmcia_fixup_iowidth); * pcmcia_fixup_vpp() - set Vpp to a new voltage level * * pcmcia_fixup_vpp() allows a PCMCIA device driver to set Vpp to - * a new voltage level between calls to pcmcia_request_configuration() + * a new voltage level between calls to pcmcia_enable_device() * and pcmcia_disable_device(). */ int pcmcia_fixup_vpp(struct pcmcia_device *p_dev, unsigned char new_vpp) @@ -432,18 +431,21 @@ int pcmcia_release_window(struct pcmcia_device *p_dev, struct resource *res) } /* pcmcia_release_window */ EXPORT_SYMBOL(pcmcia_release_window); - -int pcmcia_request_configuration(struct pcmcia_device *p_dev, - config_req_t *req) +/** + * pcmcia_enable_device() - set up and activate a PCMCIA device + * + */ +int pcmcia_enable_device(struct pcmcia_device *p_dev) { int i; - u_int base; + unsigned int base; struct pcmcia_socket *s = p_dev->socket; config_t *c; pccard_io_map iomap; unsigned char status = 0; unsigned char ext_status = 0; unsigned char option = 0; + unsigned int flags = p_dev->config_flags; if (!(s->state & SOCKET_PRESENT)) return -ENODEV; @@ -466,23 +468,20 @@ int pcmcia_request_configuration(struct pcmcia_device *p_dev, } /* Pick memory or I/O card, DMA mode, interrupt */ - c->Attributes = req->Attributes; if (p_dev->_io) s->socket.flags |= SS_IOCARD; - if (req->Attributes & CONF_ENABLE_DMA) - s->socket.flags |= SS_DMA_MODE; - if (req->Attributes & CONF_ENABLE_SPKR) { + if (flags & CONF_ENABLE_SPKR) { s->socket.flags |= SS_SPKR_ENA; status = CCSR_AUDIO_ENA; if (!(p_dev->config_regs & PRESENT_STATUS)) dev_warn(&p_dev->dev, "speaker requested, but " "PRESENT_STATUS not set!\n"); } - if (req->Attributes & CONF_ENABLE_IRQ) + if (flags & CONF_ENABLE_IRQ) s->socket.io_irq = s->pcmcia_irq; else s->socket.io_irq = 0; - if (req->Attributes & CONF_ENABLE_ESR) { + if (flags & CONF_ENABLE_ESR) { p_dev->config_regs |= PRESENT_EXT_STATUS; ext_status = ESR_REQ_ATTN_ENA; } @@ -510,8 +509,8 @@ int pcmcia_request_configuration(struct pcmcia_device *p_dev, if (p_dev->config_regs & PRESENT_IOBASE_0) option |= COR_ADDR_DECODE; } - if ((req->Attributes & CONF_ENABLE_IRQ) && - !(req->Attributes & CONF_ENABLE_PULSE_IRQ)) + if ((flags & CONF_ENABLE_IRQ) && + !(flags & CONF_ENABLE_PULSE_IRQ)) option |= COR_LEVEL_REQ; pcmcia_write_cis_mem(s, 1, (base + CISREG_COR)>>1, 1, &option); mdelay(40); @@ -560,8 +559,8 @@ int pcmcia_request_configuration(struct pcmcia_device *p_dev, p_dev->_locked = 1; mutex_unlock(&s->ops_mutex); return 0; -} /* pcmcia_request_configuration */ -EXPORT_SYMBOL(pcmcia_request_configuration); +} /* pcmcia_enable_device */ +EXPORT_SYMBOL(pcmcia_enable_device); /** diff --git a/drivers/pcmcia/pd6729.c b/drivers/pcmcia/pd6729.c index deef6656ab7b..8cbfa067171f 100644 --- a/drivers/pcmcia/pd6729.c +++ b/drivers/pcmcia/pd6729.c @@ -18,7 +18,6 @@ #include <linux/io.h> #include <pcmcia/ss.h> -#include <pcmcia/cs.h> #include <asm/system.h> diff --git a/drivers/pcmcia/rsrc_iodyn.c b/drivers/pcmcia/rsrc_iodyn.c index 8510c35d2952..523eb691c30b 100644 --- a/drivers/pcmcia/rsrc_iodyn.c +++ b/drivers/pcmcia/rsrc_iodyn.c @@ -17,7 +17,6 @@ #include <linux/kernel.h> #include <pcmcia/ss.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include "cs_internal.h" diff --git a/drivers/pcmcia/rsrc_mgr.c b/drivers/pcmcia/rsrc_mgr.c index 4e80421fd908..aa628ed0e9f4 100644 --- a/drivers/pcmcia/rsrc_mgr.c +++ b/drivers/pcmcia/rsrc_mgr.c @@ -17,7 +17,6 @@ #include <linux/kernel.h> #include <pcmcia/ss.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include "cs_internal.h" diff --git a/drivers/pcmcia/rsrc_nonstatic.c b/drivers/pcmcia/rsrc_nonstatic.c index 96f348b35fde..b187555d4388 100644 --- a/drivers/pcmcia/rsrc_nonstatic.c +++ b/drivers/pcmcia/rsrc_nonstatic.c @@ -29,7 +29,6 @@ #include <asm/irq.h> #include <pcmcia/ss.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include "cs_internal.h" diff --git a/drivers/pcmcia/sa1100_generic.c b/drivers/pcmcia/sa1100_generic.c index e09851480295..945857f8c284 100644 --- a/drivers/pcmcia/sa1100_generic.c +++ b/drivers/pcmcia/sa1100_generic.c @@ -35,7 +35,6 @@ #include <linux/slab.h> #include <linux/platform_device.h> -#include <pcmcia/cs.h> #include <pcmcia/ss.h> #include <asm/hardware/scoop.h> diff --git a/drivers/pcmcia/soc_common.h b/drivers/pcmcia/soc_common.h index 3fba3a679128..bbcd5385a221 100644 --- a/drivers/pcmcia/soc_common.h +++ b/drivers/pcmcia/soc_common.h @@ -11,7 +11,6 @@ /* include the world */ #include <linux/cpufreq.h> -#include <pcmcia/cs.h> #include <pcmcia/ss.h> #include <pcmcia/cistpl.h> diff --git a/drivers/pcmcia/socket_sysfs.c b/drivers/pcmcia/socket_sysfs.c index cb0d3ace18bd..71aeed93037c 100644 --- a/drivers/pcmcia/socket_sysfs.c +++ b/drivers/pcmcia/socket_sysfs.c @@ -27,7 +27,6 @@ #include <asm/irq.h> #include <pcmcia/ss.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/cisreg.h> #include <pcmcia/ds.h> diff --git a/drivers/pcmcia/tcic.c b/drivers/pcmcia/tcic.c index be0d841c7ebd..310160bffe38 100644 --- a/drivers/pcmcia/tcic.c +++ b/drivers/pcmcia/tcic.c @@ -49,7 +49,6 @@ #include <asm/io.h> #include <asm/system.h> -#include <pcmcia/cs.h> #include <pcmcia/ss.h> #include "tcic.h" diff --git a/drivers/pcmcia/xxs1500_ss.c b/drivers/pcmcia/xxs1500_ss.c index fa88c360c37a..3b67a1b6a197 100644 --- a/drivers/pcmcia/xxs1500_ss.c +++ b/drivers/pcmcia/xxs1500_ss.c @@ -17,7 +17,6 @@ #include <linux/slab.h> #include <linux/spinlock.h> -#include <pcmcia/cs.h> #include <pcmcia/ss.h> #include <pcmcia/cistpl.h> diff --git a/drivers/pcmcia/yenta_socket.c b/drivers/pcmcia/yenta_socket.c index 414d9a6f9a32..408dbaa080a1 100644 --- a/drivers/pcmcia/yenta_socket.c +++ b/drivers/pcmcia/yenta_socket.c @@ -20,7 +20,6 @@ #include <linux/slab.h> #include <pcmcia/ss.h> -#include <pcmcia/cs.h> #include "yenta_socket.h" #include "i82365.h" diff --git a/drivers/scsi/pcmcia/aha152x_stub.c b/drivers/scsi/pcmcia/aha152x_stub.c index c3682492af16..e1f748517135 100644 --- a/drivers/scsi/pcmcia/aha152x_stub.c +++ b/drivers/scsi/pcmcia/aha152x_stub.c @@ -49,7 +49,6 @@ #include <scsi/scsi_host.h> #include "aha152x.h" -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/ds.h> @@ -102,7 +101,7 @@ static int aha152x_probe(struct pcmcia_device *link) link->resource[0]->end = 0x20; link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; - link->conf.Attributes = CONF_ENABLE_IRQ; + link->config_flags |= CONF_ENABLE_IRQ; link->config_regs = PRESENT_OPTION; return aha152x_config_cs(link); @@ -159,7 +158,7 @@ static int aha152x_config_cs(struct pcmcia_device *link) if (!link->irq) goto failed; - ret = pcmcia_request_configuration(link, &link->conf); + ret = pcmcia_enable_device(link); if (ret) goto failed; diff --git a/drivers/scsi/pcmcia/fdomain_stub.c b/drivers/scsi/pcmcia/fdomain_stub.c index bb909e1b7c68..ae263b17bfa5 100644 --- a/drivers/scsi/pcmcia/fdomain_stub.c +++ b/drivers/scsi/pcmcia/fdomain_stub.c @@ -46,7 +46,6 @@ #include <scsi/scsi_host.h> #include "fdomain.h" -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/ds.h> @@ -85,7 +84,7 @@ static int fdomain_probe(struct pcmcia_device *link) link->priv = info; link->resource[0]->end = 0x10; link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; - link->conf.Attributes = CONF_ENABLE_IRQ; + link->config_flags |= CONF_ENABLE_IRQ; link->config_regs = PRESENT_OPTION; return fdomain_config(link); @@ -131,7 +130,7 @@ static int fdomain_config(struct pcmcia_device *link) if (!link->irq) goto failed; - ret = pcmcia_request_configuration(link, &link->conf); + ret = pcmcia_enable_device(link); if (ret) goto failed; diff --git a/drivers/scsi/pcmcia/nsp_cs.c b/drivers/scsi/pcmcia/nsp_cs.c index a5648e9c4f6e..d0546c03f57c 100644 --- a/drivers/scsi/pcmcia/nsp_cs.c +++ b/drivers/scsi/pcmcia/nsp_cs.c @@ -47,7 +47,6 @@ #include <scsi/scsi.h> #include <scsi/scsi_ioctl.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/cisreg.h> #include <pcmcia/ds.h> @@ -1562,7 +1561,7 @@ static int nsp_cs_probe(struct pcmcia_device *link) link->resource[0]->flags = IO_DATA_PATH_WIDTH_AUTO; /* General socket configuration */ - link->conf.Attributes = CONF_ENABLE_IRQ; + link->config_flags |= CONF_ENABLE_IRQ; ret = nsp_cs_config(link); @@ -1608,7 +1607,7 @@ static int nsp_cs_config_check(struct pcmcia_device *p_dev, /* Does this card need audio output? */ if (cfg->flags & CISTPL_CFTABLE_AUDIO) - p_dev->conf.Attributes |= CONF_ENABLE_SPKR; + p_dev->config_flags |= CONF_ENABLE_SPKR; /* Use power settings for Vcc and Vpp if present */ /* Note that the CIS values need to be rescaled */ @@ -1629,7 +1628,7 @@ static int nsp_cs_config_check(struct pcmcia_device *p_dev, } /* Do we need to allocate an interrupt? */ - p_dev->conf.Attributes |= CONF_ENABLE_IRQ; + p_dev->config_flags |= CONF_ENABLE_IRQ; /* IO window settings */ p_dev->resource[0]->end = p_dev->resource[1]->end = 0; @@ -1700,7 +1699,7 @@ static int nsp_cs_config(struct pcmcia_device *link) if (pcmcia_request_irq(link, nspintr)) goto cs_failed; - ret = pcmcia_request_configuration(link, &link->conf); + ret = pcmcia_enable_device(link); if (ret) goto cs_failed; @@ -1749,9 +1748,7 @@ static int nsp_cs_config(struct pcmcia_device *link) if (link->vpp) { printk(", Vpp %d.%d", link->vpp/10, link->vpp%10); } - if (link->conf.Attributes & CONF_ENABLE_IRQ) { - printk(", irq %d", link->irq); - } + printk(", irq %d", link->irq); if (link->resource[0]) printk(", io %pR", link->resource[0]); if (link->resource[1]) diff --git a/drivers/scsi/pcmcia/qlogic_stub.c b/drivers/scsi/pcmcia/qlogic_stub.c index 5e2cbe091408..7d3f49c431fd 100644 --- a/drivers/scsi/pcmcia/qlogic_stub.c +++ b/drivers/scsi/pcmcia/qlogic_stub.c @@ -48,7 +48,6 @@ #include <scsi/scsi_host.h> #include "../qlogicfas408.h" -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/ds.h> #include <pcmcia/ciscode.h> @@ -158,7 +157,7 @@ static int qlogic_probe(struct pcmcia_device *link) link->priv = info; link->resource[0]->end = 16; link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; - link->conf.Attributes = CONF_ENABLE_IRQ; + link->config_flags |= CONF_ENABLE_IRQ; link->config_regs = PRESENT_OPTION; return qlogic_config(link); @@ -208,7 +207,7 @@ static int qlogic_config(struct pcmcia_device * link) if (!link->irq) goto failed; - ret = pcmcia_request_configuration(link, &link->conf); + ret = pcmcia_enable_device(link); if (ret) goto failed; @@ -263,7 +262,7 @@ static int qlogic_resume(struct pcmcia_device *link) { scsi_info_t *info = link->priv; - pcmcia_request_configuration(link, &link->conf); + pcmcia_enable_device(link); if ((info->manf_id == MANFID_MACNICA) || (info->manf_id == MANFID_PIONEER) || (info->manf_id == 0x0098)) { diff --git a/drivers/scsi/pcmcia/sym53c500_cs.c b/drivers/scsi/pcmcia/sym53c500_cs.c index 9aaf974d4d1c..600630eb7034 100644 --- a/drivers/scsi/pcmcia/sym53c500_cs.c +++ b/drivers/scsi/pcmcia/sym53c500_cs.c @@ -71,7 +71,6 @@ #include <scsi/scsi.h> #include <scsi/scsi_host.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/ds.h> #include <pcmcia/ciscode.h> @@ -721,7 +720,7 @@ SYM53C500_config(struct pcmcia_device *link) if (!link->irq) goto failed; - ret = pcmcia_request_configuration(link, &link->conf); + ret = pcmcia_enable_device(link); if (ret) goto failed; @@ -861,7 +860,7 @@ SYM53C500_probe(struct pcmcia_device *link) link->priv = info; link->resource[0]->end = 16; link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; - link->conf.Attributes = CONF_ENABLE_IRQ; + link->config_flags |= CONF_ENABLE_IRQ; return SYM53C500_config(link); } /* SYM53C500_attach */ diff --git a/drivers/serial/serial_cs.c b/drivers/serial/serial_cs.c index ee19f2d25c20..47b1869026e7 100644 --- a/drivers/serial/serial_cs.c +++ b/drivers/serial/serial_cs.c @@ -45,7 +45,6 @@ #include <asm/io.h> #include <asm/system.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/ciscode.h> #include <pcmcia/ds.h> @@ -184,7 +183,7 @@ static void quirk_config_socket(struct pcmcia_device *link) struct serial_info *info = link->priv; if (info->multi) - link->conf.Attributes |= CONF_ENABLE_ESR; + link->config_flags |= CONF_ENABLE_ESR; } static const struct serial_quirk quirks[] = { @@ -333,9 +332,9 @@ static int serial_probe(struct pcmcia_device *link) info->p_dev = link; link->priv = info; - link->conf.Attributes = CONF_ENABLE_IRQ; + link->config_flags |= CONF_ENABLE_IRQ; if (do_sound) - link->conf.Attributes |= CONF_ENABLE_SPKR; + link->config_flags |= CONF_ENABLE_SPKR; return serial_config(link); } @@ -503,7 +502,7 @@ found_port: if (info->quirk && info->quirk->config) info->quirk->config(link); - i = pcmcia_request_configuration(link, &link->conf); + i = pcmcia_enable_device(link); if (i != 0) return -1; return setup_serial(link, info, link->resource[0]->start, link->irq); @@ -579,7 +578,7 @@ static int multi_config(struct pcmcia_device *link) if (info->quirk && info->quirk->config) info->quirk->config(link); - i = pcmcia_request_configuration(link, &link->conf); + i = pcmcia_enable_device(link); if (i != 0) return -ENODEV; diff --git a/drivers/ssb/main.c b/drivers/ssb/main.c index 7892ac163522..c68b3dc19e11 100644 --- a/drivers/ssb/main.c +++ b/drivers/ssb/main.c @@ -20,7 +20,6 @@ #include <linux/mmc/sdio_func.h> #include <linux/slab.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/ds.h> diff --git a/drivers/ssb/pcmcia.c b/drivers/ssb/pcmcia.c index 526682d68de8..c7345dbf43fa 100644 --- a/drivers/ssb/pcmcia.c +++ b/drivers/ssb/pcmcia.c @@ -13,7 +13,6 @@ #include <linux/io.h> #include <linux/etherdevice.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/ciscode.h> #include <pcmcia/ds.h> diff --git a/drivers/ssb/scan.c b/drivers/ssb/scan.c index 9738cad4ba13..ee079ab9fb28 100644 --- a/drivers/ssb/scan.c +++ b/drivers/ssb/scan.c @@ -17,7 +17,6 @@ #include <linux/pci.h> #include <linux/io.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/ds.h> diff --git a/drivers/staging/comedi/drivers/cb_das16_cs.c b/drivers/staging/comedi/drivers/cb_das16_cs.c index 034cbfcba196..ee91c89511ed 100644 --- a/drivers/staging/comedi/drivers/cb_das16_cs.c +++ b/drivers/staging/comedi/drivers/cb_das16_cs.c @@ -37,7 +37,6 @@ Status: experimental #include <linux/delay.h> #include <linux/pci.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/ds.h> @@ -692,9 +691,6 @@ static int das16cs_pcmcia_attach(struct pcmcia_device *link) local->link = link; link->priv = local; - /* Initialize the pcmcia_device structure */ - link->conf.Attributes = 0; - cur_dev = link; das16cs_pcmcia_config(link); @@ -723,7 +719,7 @@ static int das16cs_pcmcia_config_loop(struct pcmcia_device *p_dev, return -EINVAL; /* Do we need to allocate an interrupt? */ - p_dev->conf.Attributes |= CONF_ENABLE_IRQ; + p_dev->config_flags |= CONF_ENABLE_IRQ; /* IO window settings */ p_dev->resource[0]->end = p_dev->resource[1]->end = 0; @@ -767,14 +763,13 @@ static void das16cs_pcmcia_config(struct pcmcia_device *link) the I/O windows and the interrupt mapping, and putting the card and host interface into "Memory and IO" mode. */ - ret = pcmcia_request_configuration(link, &link->conf); + ret = pcmcia_enable_device(link); if (ret) goto failed; /* Finally, report what we've done */ dev_info(&link->dev, "index 0x%02x", link->config_index); - if (link->conf.Attributes & CONF_ENABLE_IRQ) - printk(", irq %u", link->irq); + printk(", irq %u", link->irq); if (link->resource[0]) printk(", io %pR", link->resource[0]); if (link->resource[1]) diff --git a/drivers/staging/comedi/drivers/das08_cs.c b/drivers/staging/comedi/drivers/das08_cs.c index e37ea79e6aea..f8f3de57b413 100644 --- a/drivers/staging/comedi/drivers/das08_cs.c +++ b/drivers/staging/comedi/drivers/das08_cs.c @@ -48,7 +48,6 @@ Command support does not exist, but could be added for this board. #include "das08.h" /* pcmcia includes */ -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/ds.h> @@ -162,15 +161,6 @@ static int das08_pcmcia_attach(struct pcmcia_device *link) local->link = link; link->priv = local; - /* - General socket configuration defaults can go here. In this - client, we assume very little, and rely on the CIS for almost - everything. In most clients, many details (i.e., number, sizes, - and attributes of IO windows) are fixed by the nature of the - device, and can be hard-wired here. - */ - link->conf.Attributes = 0; - cur_dev = link; das08_pcmcia_config(link); @@ -211,7 +201,7 @@ static int das08_pcmcia_config_loop(struct pcmcia_device *p_dev, return -ENODEV; /* Do we need to allocate an interrupt? */ - p_dev->conf.Attributes |= CONF_ENABLE_IRQ; + p_dev->config_flags |= CONF_ENABLE_IRQ; /* IO window settings */ p_dev->resource[0]->end = p_dev->resource[1]->end = 0; @@ -263,14 +253,13 @@ static void das08_pcmcia_config(struct pcmcia_device *link) the I/O windows and the interrupt mapping, and putting the card and host interface into "Memory and IO" mode. */ - ret = pcmcia_request_configuration(link, &link->conf); + ret = pcmcia_enable_device(link); if (ret) goto failed; /* Finally, report what we've done */ dev_info(&link->dev, "index 0x%02x", link->config_index); - if (link->conf.Attributes & CONF_ENABLE_IRQ) - printk(", irq %u", link->irq); + printk(", irq %u", link->irq); if (link->resource[0]) printk(", io %pR", link->resource[0]); if (link->resource[1]) diff --git a/drivers/staging/comedi/drivers/ni_daq_700.c b/drivers/staging/comedi/drivers/ni_daq_700.c index 8107e4009248..803683b83543 100644 --- a/drivers/staging/comedi/drivers/ni_daq_700.c +++ b/drivers/staging/comedi/drivers/ni_daq_700.c @@ -47,7 +47,6 @@ IRQ is assigned but not used. #include <linux/ioport.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/cisreg.h> #include <pcmcia/ds.h> @@ -491,15 +490,6 @@ static int dio700_cs_attach(struct pcmcia_device *link) local->link = link; link->priv = local; - /* - General socket configuration defaults can go here. In this - client, we assume very little, and rely on the CIS for almost - everything. In most clients, many details (i.e., number, sizes, - and attributes of IO windows) are fixed by the nature of the - device, and can be hard-wired here. - */ - link->conf.Attributes = 0; - pcmcia_cur_dev = link; dio700_config(link); @@ -550,10 +540,10 @@ static int dio700_pcmcia_config_loop(struct pcmcia_device *p_dev, /* Does this card need audio output? */ if (cfg->flags & CISTPL_CFTABLE_AUDIO) - p_dev->conf.Attributes |= CONF_ENABLE_SPKR; + p_dev->config_flags |= CONF_ENABLE_SPKR; /* Do we need to allocate an interrupt? */ - p_dev->conf.Attributes |= CONF_ENABLE_IRQ; + p_dev->config_flags |= CONF_ENABLE_IRQ; /* IO window settings */ p_dev->resource[0]->end = p_dev->resource[1]->end = 0; @@ -602,14 +592,13 @@ static void dio700_config(struct pcmcia_device *link) the I/O windows and the interrupt mapping, and putting the card and host interface into "Memory and IO" mode. */ - ret = pcmcia_request_configuration(link, &link->conf); + ret = pcmcia_enable_device(link); if (ret != 0) goto failed; /* Finally, report what we've done */ dev_info(&link->dev, "index 0x%02x", link->config_index); - if (link->conf.Attributes & CONF_ENABLE_IRQ) - printk(", irq %d", link->irq); + printk(", irq %d", link->irq); if (link->resource[0]) printk(", io %pR", link->resource[0]); if (link->resource[1]) diff --git a/drivers/staging/comedi/drivers/ni_daq_dio24.c b/drivers/staging/comedi/drivers/ni_daq_dio24.c index 4f9daa3558aa..6512f7a283ce 100644 --- a/drivers/staging/comedi/drivers/ni_daq_dio24.c +++ b/drivers/staging/comedi/drivers/ni_daq_dio24.c @@ -48,7 +48,6 @@ the PCMCIA interface. #include "8255.h" -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/cisreg.h> #include <pcmcia/ds.h> @@ -243,15 +242,6 @@ static int dio24_cs_attach(struct pcmcia_device *link) local->link = link; link->priv = local; - /* - General socket configuration defaults can go here. In this - client, we assume very little, and rely on the CIS for almost - everything. In most clients, many details (i.e., number, sizes, - and attributes of IO windows) are fixed by the nature of the - device, and can be hard-wired here. - */ - link->conf.Attributes = 0; - pcmcia_cur_dev = link; dio24_config(link); @@ -302,10 +292,10 @@ static int dio24_pcmcia_config_loop(struct pcmcia_device *p_dev, /* Does this card need audio output? */ if (cfg->flags & CISTPL_CFTABLE_AUDIO) - p_dev->conf.Attributes |= CONF_ENABLE_SPKR; + p_dev->config_flags |= CONF_ENABLE_SPKR; /* Do we need to allocate an interrupt? */ - p_dev->conf.Attributes |= CONF_ENABLE_IRQ; + p_dev->config_flags |= CONF_ENABLE_IRQ; /* IO window settings */ p_dev->resource[0]->end = p_dev->resource[1]->end = 0; @@ -353,14 +343,13 @@ static void dio24_config(struct pcmcia_device *link) the I/O windows and the interrupt mapping, and putting the card and host interface into "Memory and IO" mode. */ - ret = pcmcia_request_configuration(link, &link->conf); + ret = pcmcia_enable_device(link); if (ret) goto failed; /* Finally, report what we've done */ dev_info(&link->dev, "index 0x%02x", link->config_index); - if (link->conf.Attributes & CONF_ENABLE_IRQ) - printk(", irq %d", link->irq); + printk(", irq %d", link->irq); if (link->resource[0]) printk(" & %pR", link->resource[0]); if (link->resource[1]) diff --git a/drivers/staging/comedi/drivers/ni_labpc_cs.c b/drivers/staging/comedi/drivers/ni_labpc_cs.c index 2e27a3048cb8..255cf40c5fd1 100644 --- a/drivers/staging/comedi/drivers/ni_labpc_cs.c +++ b/drivers/staging/comedi/drivers/ni_labpc_cs.c @@ -71,7 +71,6 @@ NI manuals: #include "comedi_fc.h" #include "ni_labpc.h" -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/cisreg.h> #include <pcmcia/ds.h> @@ -219,15 +218,6 @@ static int labpc_cs_attach(struct pcmcia_device *link) local->link = link; link->priv = local; - /* - General socket configuration defaults can go here. In this - client, we assume very little, and rely on the CIS for almost - everything. In most clients, many details (i.e., number, sizes, - and attributes of IO windows) are fixed by the nature of the - device, and can be hard-wired here. - */ - link->conf.Attributes = 0; - pcmcia_cur_dev = link; labpc_config(link); @@ -281,10 +271,10 @@ static int labpc_pcmcia_config_loop(struct pcmcia_device *p_dev, /* Does this card need audio output? */ if (cfg->flags & CISTPL_CFTABLE_AUDIO) - p_dev->conf.Attributes |= CONF_ENABLE_SPKR; + p_dev->config_flags |= CONF_ENABLE_SPKR; /* Do we need to allocate an interrupt? */ - p_dev->conf.Attributes |= CONF_ENABLE_IRQ | CONF_ENABLE_PULSE_IRQ; + p_dev->config_flags |= CONF_ENABLE_IRQ | CONF_ENABLE_PULSE_IRQ; /* IO window settings */ p_dev->resource[0]->end = p_dev->resource[1]->end = 0; @@ -331,14 +321,14 @@ static void labpc_config(struct pcmcia_device *link) the I/O windows and the interrupt mapping, and putting the card and host interface into "Memory and IO" mode. */ - ret = pcmcia_request_configuration(link, &link->conf); + p_dev->config_flags |= CONF_ENABLE_IRQ | CONF_ENABLE_PULSE_IRQ; + ret = pcmcia_enable_device(link); if (ret) goto failed; /* Finally, report what we've done */ dev_info(&link->dev, "index 0x%02x", link->config_index); - if (link->conf.Attributes & CONF_ENABLE_IRQ) - printk(", irq %d", link->irq); + printk(", irq %d", link->irq); if (link->resource[0]) printk(" & %pR", link->resource[0]); if (link->resource[1]) diff --git a/drivers/staging/comedi/drivers/ni_mio_cs.c b/drivers/staging/comedi/drivers/ni_mio_cs.c index be7e021e576d..b88f52dd08d0 100644 --- a/drivers/staging/comedi/drivers/ni_mio_cs.c +++ b/drivers/staging/comedi/drivers/ni_mio_cs.c @@ -48,7 +48,6 @@ See the notes in the ni_atmio.o driver. #include "ni_stc.h" #include "8255.h" -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/ds.h> @@ -265,7 +264,7 @@ static int cs_attach(struct pcmcia_device *link) { link->resource[0]->flags |= IO_DATA_PATH_WIDTH_16; link->resource[0]->end = 16; - link->conf.Attributes = CONF_ENABLE_IRQ; + link->config_flags |= CONF_ENABLE_IRQ; cur_dev = link; @@ -336,7 +335,7 @@ static void mio_cs_config(struct pcmcia_device *link) if (!link->irq) dev_info(&link->dev, "no IRQ available\n"); - ret = pcmcia_request_configuration(link, &link->conf); + ret = pcmcia_enable_device(link); } static int mio_cs_attach(struct comedi_device *dev, struct comedi_devconfig *it) diff --git a/drivers/staging/comedi/drivers/quatech_daqp_cs.c b/drivers/staging/comedi/drivers/quatech_daqp_cs.c index a2a32de044c8..b8940d7f4155 100644 --- a/drivers/staging/comedi/drivers/quatech_daqp_cs.c +++ b/drivers/staging/comedi/drivers/quatech_daqp_cs.c @@ -50,7 +50,6 @@ Devices: [Quatech] DAQP-208 (daqp), DAQP-308 #include "../comedidev.h" #include <linux/semaphore.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/cisreg.h> #include <pcmcia/ds.h> @@ -1031,15 +1030,6 @@ static int daqp_cs_attach(struct pcmcia_device *link) local->link = link; link->priv = local; - /* - General socket configuration defaults can go here. In this - client, we assume very little, and rely on the CIS for almost - everything. In most clients, many details (i.e., number, sizes, - and attributes of IO windows) are fixed by the nature of the - device, and can be hard-wired here. - */ - link->conf.Attributes = 0; - daqp_cs_config(link); return 0; @@ -1088,7 +1078,7 @@ static int daqp_pcmcia_config_loop(struct pcmcia_device *p_dev, return -ENODEV; /* Do we need to allocate an interrupt? */ - p_dev->conf.Attributes |= CONF_ENABLE_IRQ; + p_dev->config_flags |= CONF_ENABLE_IRQ; /* IO window settings */ p_dev->resource[0]->end = p_dev->resource[1]->end = 0; @@ -1132,14 +1122,13 @@ static void daqp_cs_config(struct pcmcia_device *link) the I/O windows and the interrupt mapping, and putting the card and host interface into "Memory and IO" mode. */ - ret = pcmcia_request_configuration(link, &link->conf); + ret = pcmcia_enable_device(link); if (ret) goto failed; /* Finally, report what we've done */ dev_info(&link->dev, "index 0x%02x", link->config_index); - if (link->conf.Attributes & CONF_ENABLE_IRQ) - printk(", irq %u", link->irq); + printk(", irq %u", link->irq); if (link->resource[0]) printk(" & %pR", link->resource[0]); if (link->resource[1]) diff --git a/drivers/staging/wlags49_h2/wl_cs.c b/drivers/staging/wlags49_h2/wl_cs.c index 778800f1e464..62a70afa3e29 100644 --- a/drivers/staging/wlags49_h2/wl_cs.c +++ b/drivers/staging/wlags49_h2/wl_cs.c @@ -83,7 +83,6 @@ #include <linux/if_arp.h> #include <linux/ioport.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/cisreg.h> #include <pcmcia/ciscode.h> @@ -147,7 +146,7 @@ static int wl_adapter_attach(struct pcmcia_device *link) link->resource[0]->end = HCF_NUM_IO_PORTS; link->resource[0]->flags= IO_DATA_PATH_WIDTH_16; - link->conf.Attributes = CONF_ENABLE_IRQ; + link->config_flags |= CONF_ENABLE_IRQ; link->config_index = 5; link->config_regs = PRESENT_OPTION; @@ -301,7 +300,7 @@ void wl_adapter_insert(struct pcmcia_device *link) dev = link->priv; /* Do we need to allocate an interrupt? */ - link->conf.Attributes |= CONF_ENABLE_IRQ; + link->config_flags |= CONF_ENABLE_IRQ; link->io_lines = 6; ret = pcmcia_request_io(link); @@ -312,7 +311,7 @@ void wl_adapter_insert(struct pcmcia_device *link) if (ret != 0) goto failed; - ret = pcmcia_request_configuration(link, &link->conf); + ret = pcmcia_enable_device(link); if (ret != 0) goto failed; diff --git a/drivers/staging/wlags49_h2/wl_internal.h b/drivers/staging/wlags49_h2/wl_internal.h index 02f0a20e178a..cd129b3ee6c0 100644 --- a/drivers/staging/wlags49_h2/wl_internal.h +++ b/drivers/staging/wlags49_h2/wl_internal.h @@ -69,7 +69,6 @@ ******************************************************************************/ #include <linux/version.h> #ifdef BUS_PCMCIA -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/cisreg.h> #include <pcmcia/ciscode.h> diff --git a/drivers/telephony/ixj_pcmcia.c b/drivers/telephony/ixj_pcmcia.c index 5ccc6d0560a9..e23270d1b4d1 100644 --- a/drivers/telephony/ixj_pcmcia.c +++ b/drivers/telephony/ixj_pcmcia.c @@ -8,7 +8,6 @@ #include <linux/errno.h> /* error codes */ #include <linux/slab.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/ds.h> @@ -143,7 +142,7 @@ static int ixj_config(struct pcmcia_device * link) if (pcmcia_loop_config(link, ixj_config_check, &dflt)) goto failed; - if (pcmcia_request_configuration(link, &link->conf)) + if (pcmcia_enable_device(link)) goto failed; /* diff --git a/drivers/usb/host/sl811_cs.c b/drivers/usb/host/sl811_cs.c index 590405361bed..744c2cd809f1 100644 --- a/drivers/usb/host/sl811_cs.c +++ b/drivers/usb/host/sl811_cs.c @@ -20,7 +20,6 @@ #include <linux/ioport.h> #include <linux/platform_device.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/cisreg.h> #include <pcmcia/ds.h> @@ -159,7 +158,7 @@ static int sl811_cs_config_check(struct pcmcia_device *p_dev, dflt->vpp1.param[CISTPL_POWER_VNOM]/10000; /* we need an interrupt */ - p_dev->conf.Attributes |= CONF_ENABLE_IRQ; + p_dev->config_flags |= CONF_ENABLE_IRQ; /* IO window settings */ p_dev->resource[0]->end = p_dev->resource[1]->end = 0; @@ -195,7 +194,7 @@ static int sl811_cs_config(struct pcmcia_device *link) if (!link->irq) goto failed; - ret = pcmcia_request_configuration(link, &link->conf); + ret = pcmcia_enable_device(link); if (ret) goto failed; @@ -227,8 +226,6 @@ static int sl811_cs_probe(struct pcmcia_device *link) local->p_dev = link; link->priv = local; - link->conf.Attributes = 0; - return sl811_cs_config(link); } |