diff options
Diffstat (limited to 'drivers')
100 files changed, 1385 insertions, 445 deletions
diff --git a/drivers/Makefile b/drivers/Makefile index 2503f7b99b2f..fceb71a741c3 100644 --- a/drivers/Makefile +++ b/drivers/Makefile @@ -56,6 +56,7 @@ obj-$(CONFIG_MAC) += macintosh/ obj-$(CONFIG_ATA_OVER_ETH) += block/aoe/ obj-$(CONFIG_PARIDE) += block/paride/ obj-$(CONFIG_TC) += tc/ +obj-$(CONFIG_UWB) += uwb/ obj-$(CONFIG_USB) += usb/ obj-$(CONFIG_USB_MUSB_HDRC) += usb/musb/ obj-$(CONFIG_PCI) += usb/ @@ -101,4 +102,3 @@ obj-$(CONFIG_SSB) += ssb/ obj-$(CONFIG_VIRTIO) += virtio/ obj-$(CONFIG_REGULATOR) += regulator/ obj-$(CONFIG_STAGING) += staging/ -obj-$(CONFIG_UWB) += uwb/ diff --git a/drivers/acpi/button.c b/drivers/acpi/button.c index 9d568d417eaa..cb046c3fc3f2 100644 --- a/drivers/acpi/button.c +++ b/drivers/acpi/button.c @@ -262,6 +262,7 @@ static int acpi_lid_send_state(struct acpi_button *button) return -ENODEV; /* input layer checks if event is redundant */ input_report_switch(button->input, SW_LID, !state); + input_sync(button->input); return 0; } @@ -285,8 +286,8 @@ static void acpi_button_notify(acpi_handle handle, u32 event, void *data) input_report_key(input, keycode, 1); input_sync(input); input_report_key(input, keycode, 0); + input_sync(input); } - input_sync(input); acpi_bus_generate_proc_event(button->device, event, ++button->pushed); diff --git a/drivers/acpi/processor_perflib.c b/drivers/acpi/processor_perflib.c index dc98f7a6f2c4..dbcf260ea93f 100644 --- a/drivers/acpi/processor_perflib.c +++ b/drivers/acpi/processor_perflib.c @@ -38,7 +38,10 @@ #include <asm/uaccess.h> #endif + +#ifdef CONFIG_X86 #include <asm/cpufeature.h> +#endif #include <acpi/acpi_bus.h> #include <acpi/processor.h> @@ -360,11 +363,13 @@ static int acpi_processor_get_performance_info(struct acpi_processor *pr) * the BIOS is older than the CPU and does not know its frequencies */ update_bios: +#ifdef CONFIG_X86 if (ACPI_SUCCESS(acpi_get_handle(pr->handle, "_PPC", &handle))){ if(boot_cpu_has(X86_FEATURE_EST)) printk(KERN_WARNING FW_BUG "BIOS needs update for CPU " "frequency support\n"); } +#endif return result; } diff --git a/drivers/acpi/sleep/main.c b/drivers/acpi/sleep/main.c index 26571bafb158..80c0868d0480 100644 --- a/drivers/acpi/sleep/main.c +++ b/drivers/acpi/sleep/main.c @@ -163,6 +163,8 @@ static void acpi_pm_end(void) acpi_target_sleep_state = ACPI_STATE_S0; acpi_sleep_tts_switch(acpi_target_sleep_state); } +#else /* !CONFIG_ACPI_SLEEP */ +#define acpi_target_sleep_state ACPI_STATE_S0 #endif /* CONFIG_ACPI_SLEEP */ #ifdef CONFIG_SUSPEND diff --git a/drivers/acpi/toshiba_acpi.c b/drivers/acpi/toshiba_acpi.c index 2a632f8b7a05..66aac06f2ac5 100644 --- a/drivers/acpi/toshiba_acpi.c +++ b/drivers/acpi/toshiba_acpi.c @@ -371,6 +371,7 @@ static void bt_poll_rfkill(struct input_polled_dev *poll_dev) RFKILL_STATE_HARD_BLOCKED); input_report_switch(poll_dev->input, SW_RFKILL_ALL, new_rfk_state); + input_sync(poll_dev->input); } } @@ -842,6 +843,7 @@ static int __init toshiba_acpi_init(void) set_bit(EV_SW, toshiba_acpi.poll_dev->input->evbit); set_bit(SW_RFKILL_ALL, toshiba_acpi.poll_dev->input->swbit); input_report_switch(toshiba_acpi.poll_dev->input, SW_RFKILL_ALL, TRUE); + input_sync(toshiba_acpi.poll_dev->input); ret = input_register_polled_device(toshiba_acpi.poll_dev); if (ret) { diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index aeadd00411a1..a67b8e7c712d 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -49,6 +49,17 @@ #define DRV_NAME "ahci" #define DRV_VERSION "3.0" +/* Enclosure Management Control */ +#define EM_CTRL_MSG_TYPE 0x000f0000 + +/* Enclosure Management LED Message Type */ +#define EM_MSG_LED_HBA_PORT 0x0000000f +#define EM_MSG_LED_PMP_SLOT 0x0000ff00 +#define EM_MSG_LED_VALUE 0xffff0000 +#define EM_MSG_LED_VALUE_ACTIVITY 0x00070000 +#define EM_MSG_LED_VALUE_OFF 0xfff80000 +#define EM_MSG_LED_VALUE_ON 0x00010000 + static int ahci_skip_host_reset; module_param_named(skip_host_reset, ahci_skip_host_reset, int, 0444); MODULE_PARM_DESC(skip_host_reset, "skip global host reset (0=don't skip, 1=skip)"); @@ -588,6 +599,9 @@ static const struct pci_device_id ahci_pci_tbl[] = { { PCI_VDEVICE(MARVELL, 0x6145), board_ahci_mv }, /* 6145 */ { PCI_VDEVICE(MARVELL, 0x6121), board_ahci_mv }, /* 6121 */ + /* Promise */ + { PCI_VDEVICE(PROMISE, 0x3f20), board_ahci }, /* PDC42819 */ + /* Generic, PCI class code for AHCI */ { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_STORAGE_SATA_AHCI, 0xffffff, board_ahci }, @@ -1220,18 +1234,20 @@ static void ahci_sw_activity_blink(unsigned long arg) struct ahci_em_priv *emp = &pp->em_priv[link->pmp]; unsigned long led_message = emp->led_state; u32 activity_led_state; + unsigned long flags; - led_message &= 0xffff0000; + led_message &= EM_MSG_LED_VALUE; led_message |= ap->port_no | (link->pmp << 8); /* check to see if we've had activity. If so, * toggle state of LED and reset timer. If not, * turn LED to desired idle state. */ + spin_lock_irqsave(ap->lock, flags); if (emp->saved_activity != emp->activity) { emp->saved_activity = emp->activity; /* get the current LED state */ - activity_led_state = led_message & 0x00010000; + activity_led_state = led_message & EM_MSG_LED_VALUE_ON; if (activity_led_state) activity_led_state = 0; @@ -1239,17 +1255,18 @@ static void ahci_sw_activity_blink(unsigned long arg) activity_led_state = 1; /* clear old state */ - led_message &= 0xfff8ffff; + led_message &= ~EM_MSG_LED_VALUE_ACTIVITY; /* toggle state */ led_message |= (activity_led_state << 16); mod_timer(&emp->timer, jiffies + msecs_to_jiffies(100)); } else { /* switch to idle */ - led_message &= 0xfff8ffff; + led_message &= ~EM_MSG_LED_VALUE_ACTIVITY; if (emp->blink_policy == BLINK_OFF) led_message |= (1 << 16); } + spin_unlock_irqrestore(ap->lock, flags); ahci_transmit_led_message(ap, led_message, 4); } @@ -1294,7 +1311,7 @@ static ssize_t ahci_transmit_led_message(struct ata_port *ap, u32 state, struct ahci_em_priv *emp; /* get the slot number from the message */ - pmp = (state & 0x0000ff00) >> 8; + pmp = (state & EM_MSG_LED_PMP_SLOT) >> 8; if (pmp < MAX_SLOTS) emp = &pp->em_priv[pmp]; else @@ -1319,7 +1336,7 @@ static ssize_t ahci_transmit_led_message(struct ata_port *ap, u32 state, message[0] |= (4 << 8); /* ignore 0:4 of byte zero, fill in port info yourself */ - message[1] = ((state & 0xfffffff0) | ap->port_no); + message[1] = ((state & ~EM_MSG_LED_HBA_PORT) | ap->port_no); /* write message to EM_LOC */ writel(message[0], mmio + hpriv->em_loc); @@ -1362,7 +1379,7 @@ static ssize_t ahci_led_store(struct ata_port *ap, const char *buf, state = simple_strtoul(buf, NULL, 0); /* get the slot number from the message */ - pmp = (state & 0x0000ff00) >> 8; + pmp = (state & EM_MSG_LED_PMP_SLOT) >> 8; if (pmp < MAX_SLOTS) emp = &pp->em_priv[pmp]; else @@ -1373,7 +1390,7 @@ static ssize_t ahci_led_store(struct ata_port *ap, const char *buf, * activity led through em_message */ if (emp->blink_policy) - state &= 0xfff8ffff; + state &= ~EM_MSG_LED_VALUE_ACTIVITY; return ahci_transmit_led_message(ap, state, size); } @@ -1392,16 +1409,16 @@ static ssize_t ahci_activity_store(struct ata_device *dev, enum sw_activity val) link->flags &= ~(ATA_LFLAG_SW_ACTIVITY); /* set the LED to OFF */ - port_led_state &= 0xfff80000; + port_led_state &= EM_MSG_LED_VALUE_OFF; port_led_state |= (ap->port_no | (link->pmp << 8)); ahci_transmit_led_message(ap, port_led_state, 4); } else { link->flags |= ATA_LFLAG_SW_ACTIVITY; if (val == BLINK_OFF) { /* set LED to ON for idle */ - port_led_state &= 0xfff80000; + port_led_state &= EM_MSG_LED_VALUE_OFF; port_led_state |= (ap->port_no | (link->pmp << 8)); - port_led_state |= 0x00010000; /* check this */ + port_led_state |= EM_MSG_LED_VALUE_ON; /* check this */ ahci_transmit_led_message(ap, port_led_state, 4); } } @@ -2612,7 +2629,7 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) u32 em_loc = readl(mmio + HOST_EM_LOC); u32 em_ctl = readl(mmio + HOST_EM_CTL); - messages = (em_ctl & 0x000f0000) >> 16; + messages = (em_ctl & EM_CTRL_MSG_TYPE) >> 16; /* we only support LED message type right now */ if ((messages & 0x01) && (ahci_em_messages == 1)) { diff --git a/drivers/ata/ata_generic.c b/drivers/ata/ata_generic.c index 75a406f5e694..5c33767e66de 100644 --- a/drivers/ata/ata_generic.c +++ b/drivers/ata/ata_generic.c @@ -1,6 +1,6 @@ /* * ata_generic.c - Generic PATA/SATA controller driver. - * Copyright 2005 Red Hat Inc <alan@redhat.com>, all rights reserved. + * Copyright 2005 Red Hat Inc, all rights reserved. * * Elements from ide/pci/generic.c * Copyright (C) 2001-2002 Andre Hedrick <andre@linux-ide.org> diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c index e9e32ed6b1a3..52dc2d8b8f22 100644 --- a/drivers/ata/ata_piix.c +++ b/drivers/ata/ata_piix.c @@ -14,7 +14,7 @@ * * Copyright (C) 1998-1999 Andrzej Krzysztofowicz, Author and Maintainer * Copyright (C) 1998-2000 Andre Hedrick <andre@linux-ide.org> - * Copyright (C) 2003 Red Hat Inc <alan@redhat.com> + * Copyright (C) 2003 Red Hat Inc * * * This program is free software; you can redistribute it and/or modify diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index 8cb0b360bfd8..2ff633c119e2 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -4156,29 +4156,33 @@ static int cable_is_40wire(struct ata_port *ap) struct ata_link *link; struct ata_device *dev; - /* If the controller thinks we are 40 wire, we are */ + /* If the controller thinks we are 40 wire, we are. */ if (ap->cbl == ATA_CBL_PATA40) return 1; - /* If the controller thinks we are 80 wire, we are */ + + /* If the controller thinks we are 80 wire, we are. */ if (ap->cbl == ATA_CBL_PATA80 || ap->cbl == ATA_CBL_SATA) return 0; - /* If the system is known to be 40 wire short cable (eg laptop), - then we allow 80 wire modes even if the drive isn't sure */ + + /* If the system is known to be 40 wire short cable (eg + * laptop), then we allow 80 wire modes even if the drive + * isn't sure. + */ if (ap->cbl == ATA_CBL_PATA40_SHORT) return 0; - /* If the controller doesn't know we scan - - - Note: We look for all 40 wire detects at this point. - Any 80 wire detect is taken to be 80 wire cable - because - - In many setups only the one drive (slave if present) - will give a valid detect - - If you have a non detect capable drive you don't - want it to colour the choice - */ + + /* If the controller doesn't know, we scan. + * + * Note: We look for all 40 wire detects at this point. Any + * 80 wire detect is taken to be 80 wire cable because + * - in many setups only the one drive (slave if present) will + * give a valid detect + * - if you have a non detect capable drive you don't want it + * to colour the choice + */ ata_port_for_each_link(link, ap) { ata_link_for_each_dev(dev, link) { - if (!ata_is_40wire(dev)) + if (ata_dev_enabled(dev) && !ata_is_40wire(dev)) return 0; } } @@ -4553,6 +4557,7 @@ void swap_buf_le16(u16 *buf, unsigned int buf_words) /** * ata_qc_new_init - Request an available ATA command, and initialize it * @dev: Device from whom we request an available command structure + * @tag: command tag * * LOCKING: * None. diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c index 5d687d7cffae..8077bdf5d30d 100644 --- a/drivers/ata/libata-eh.c +++ b/drivers/ata/libata-eh.c @@ -603,6 +603,9 @@ void ata_scsi_error(struct Scsi_Host *host) ata_link_for_each_dev(dev, link) { int devno = dev->devno; + if (!ata_dev_enabled(dev)) + continue; + ehc->saved_xfer_mode[devno] = dev->xfer_mode; if (ata_ncq_enabled(dev)) ehc->saved_ncq_enabled |= 1 << devno; @@ -1161,6 +1164,7 @@ void ata_eh_detach_dev(struct ata_device *dev) { struct ata_link *link = dev->link; struct ata_port *ap = link->ap; + struct ata_eh_context *ehc = &link->eh_context; unsigned long flags; ata_dev_disable(dev); @@ -1174,9 +1178,11 @@ void ata_eh_detach_dev(struct ata_device *dev) ap->pflags |= ATA_PFLAG_SCSI_HOTPLUG; } - /* clear per-dev EH actions */ + /* clear per-dev EH info */ ata_eh_clear_action(link, dev, &link->eh_info, ATA_EH_PERDEV_MASK); ata_eh_clear_action(link, dev, &link->eh_context.i, ATA_EH_PERDEV_MASK); + ehc->saved_xfer_mode[dev->devno] = 0; + ehc->saved_ncq_enabled &= ~(1 << dev->devno); spin_unlock_irqrestore(ap->lock, flags); } @@ -2787,6 +2793,9 @@ int ata_set_mode(struct ata_link *link, struct ata_device **r_failed_dev) /* if data transfer is verified, clear DUBIOUS_XFER on ering top */ ata_link_for_each_dev(dev, link) { + if (!ata_dev_enabled(dev)) + continue; + if (!(dev->flags & ATA_DFLAG_DUBIOUS_XFER)) { struct ata_ering_entry *ent; @@ -2808,6 +2817,9 @@ int ata_set_mode(struct ata_link *link, struct ata_device **r_failed_dev) u8 saved_xfer_mode = ehc->saved_xfer_mode[dev->devno]; u8 saved_ncq = !!(ehc->saved_ncq_enabled & (1 << dev->devno)); + if (!ata_dev_enabled(dev)) + continue; + if (dev->xfer_mode != saved_xfer_mode || ata_ncq_enabled(dev) != saved_ncq) dev->flags |= ATA_DFLAG_DUBIOUS_XFER; diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c index d5b9b7266c8b..bbb30d882f05 100644 --- a/drivers/ata/libata-scsi.c +++ b/drivers/ata/libata-scsi.c @@ -708,7 +708,11 @@ static struct ata_queued_cmd *ata_scsi_qc_new(struct ata_device *dev, { struct ata_queued_cmd *qc; - qc = ata_qc_new_init(dev, cmd->request->tag); + if (cmd->request->tag != -1) + qc = ata_qc_new_init(dev, cmd->request->tag); + else + qc = ata_qc_new_init(dev, 0); + if (qc) { qc->scsicmd = cmd; qc->scsidone = done; @@ -1103,6 +1107,15 @@ static int ata_scsi_dev_config(struct scsi_device *sdev, depth = min(sdev->host->can_queue, ata_id_queue_depth(dev->id)); depth = min(ATA_MAX_QUEUE - 1, depth); + + /* + * If this device is behind a port multiplier, we have + * to share the tag map between all devices on that PMP. + * Set up the shared tag map here and we get automatic. + */ + if (dev->link->ap->pmp_link) + scsi_init_shared_tag_map(sdev->host, ATA_MAX_QUEUE - 1); + scsi_set_tag_type(sdev, MSG_SIMPLE_TAG); scsi_activate_tcq(sdev, depth); } diff --git a/drivers/ata/pata_acpi.c b/drivers/ata/pata_acpi.c index eb919c16a03e..e2e332d8ff95 100644 --- a/drivers/ata/pata_acpi.c +++ b/drivers/ata/pata_acpi.c @@ -1,7 +1,7 @@ /* * ACPI PATA driver * - * (c) 2007 Red Hat <alan@redhat.com> + * (c) 2007 Red Hat */ #include <linux/kernel.h> diff --git a/drivers/ata/pata_ali.c b/drivers/ata/pata_ali.c index 5ca70fa1f587..73c466e452ca 100644 --- a/drivers/ata/pata_ali.c +++ b/drivers/ata/pata_ali.c @@ -1,7 +1,6 @@ /* * pata_ali.c - ALI 15x3 PATA for new ATA layer * (C) 2005 Red Hat Inc - * Alan Cox <alan@redhat.com> * * based in part upon * linux/drivers/ide/pci/alim15x3.c Version 0.17 2003/01/02 diff --git a/drivers/ata/pata_amd.c b/drivers/ata/pata_amd.c index 57dd00f463d3..0ec9c7d9fe9d 100644 --- a/drivers/ata/pata_amd.c +++ b/drivers/ata/pata_amd.c @@ -1,7 +1,6 @@ /* * pata_amd.c - AMD PATA for new ATA layer * (C) 2005-2006 Red Hat Inc - * Alan Cox <alan@redhat.com> * * Based on pata-sil680. Errata information is taken from data sheets * and the amd74xx.c driver by Vojtech Pavlik. Nvidia SATA devices are diff --git a/drivers/ata/pata_artop.c b/drivers/ata/pata_artop.c index 0f513bc11193..6b3092c75ffe 100644 --- a/drivers/ata/pata_artop.c +++ b/drivers/ata/pata_artop.c @@ -1,7 +1,7 @@ /* * pata_artop.c - ARTOP ATA controller driver * - * (C) 2006 Red Hat <alan@redhat.com> + * (C) 2006 Red Hat * (C) 2007 Bartlomiej Zolnierkiewicz * * Based in part on drivers/ide/pci/aec62xx.c diff --git a/drivers/ata/pata_atiixp.c b/drivers/ata/pata_atiixp.c index e8a0d99d7356..0e2cde8f9973 100644 --- a/drivers/ata/pata_atiixp.c +++ b/drivers/ata/pata_atiixp.c @@ -1,7 +1,6 @@ /* * pata_atiixp.c - ATI PATA for new ATA layer * (C) 2005 Red Hat Inc - * Alan Cox <alan@redhat.com> * * Based on * diff --git a/drivers/ata/pata_cmd640.c b/drivers/ata/pata_cmd640.c index 2de30b990278..34a394264c3d 100644 --- a/drivers/ata/pata_cmd640.c +++ b/drivers/ata/pata_cmd640.c @@ -1,7 +1,6 @@ /* * pata_cmd640.c - CMD640 PCI PATA for new ATA layer * (C) 2007 Red Hat Inc - * Alan Cox <alan@redhat.com> * * Based upon * linux/drivers/ide/pci/cmd640.c Version 1.02 Sep 01, 1996 diff --git a/drivers/ata/pata_cmd64x.c b/drivers/ata/pata_cmd64x.c index ddd09b7d98c9..3167d8fed2f2 100644 --- a/drivers/ata/pata_cmd64x.c +++ b/drivers/ata/pata_cmd64x.c @@ -1,7 +1,7 @@ /* * pata_cmd64x.c - CMD64x PATA for new ATA layer * (C) 2005 Red Hat Inc - * Alan Cox <alan@redhat.com> + * Alan Cox <alan@lxorguk.ukuu.org.uk> * * Based upon * linux/drivers/ide/pci/cmd64x.c Version 1.30 Sept 10, 2002 diff --git a/drivers/ata/pata_cs5530.c b/drivers/ata/pata_cs5530.c index 0c4b271a9d5a..bba453381f44 100644 --- a/drivers/ata/pata_cs5530.c +++ b/drivers/ata/pata_cs5530.c @@ -1,7 +1,6 @@ /* * pata-cs5530.c - CS5530 PATA for new ATA layer * (C) 2005 Red Hat Inc - * Alan Cox <alan@redhat.com> * * based upon cs5530.c by Mark Lord. * diff --git a/drivers/ata/pata_cs5535.c b/drivers/ata/pata_cs5535.c index f1b6556f0483..1b2d4a0f5f74 100644 --- a/drivers/ata/pata_cs5535.c +++ b/drivers/ata/pata_cs5535.c @@ -1,7 +1,7 @@ /* * pata-cs5535.c - CS5535 PATA for new ATA layer * (C) 2005-2006 Red Hat Inc - * Alan Cox <alan@redhat.com> + * Alan Cox <alan@lxorguk.ukuu.org.uk> * * based upon cs5535.c from AMD <Jens.Altmann@amd.com> as cleaned up and * made readable and Linux style by Wolfgang Zuleger <wolfgang.zuleger@gmx.de diff --git a/drivers/ata/pata_cypress.c b/drivers/ata/pata_cypress.c index 2ff62608ae37..d546425cd380 100644 --- a/drivers/ata/pata_cypress.c +++ b/drivers/ata/pata_cypress.c @@ -1,7 +1,7 @@ /* * pata_cypress.c - Cypress PATA for new ATA layer * (C) 2006 Red Hat Inc - * Alan Cox <alan@redhat.com> + * Alan Cox * * Based heavily on * linux/drivers/ide/pci/cy82c693.c Version 0.40 Sep. 10, 2002 diff --git a/drivers/ata/pata_efar.c b/drivers/ata/pata_efar.c index 9fba82976ba6..ac6392ea35b0 100644 --- a/drivers/ata/pata_efar.c +++ b/drivers/ata/pata_efar.c @@ -1,7 +1,7 @@ /* * pata_efar.c - EFAR PIIX clone controller driver * - * (C) 2005 Red Hat <alan@redhat.com> + * (C) 2005 Red Hat * * Some parts based on ata_piix.c by Jeff Garzik and others. * diff --git a/drivers/ata/pata_isapnp.c b/drivers/ata/pata_isapnp.c index 6a111baab523..15cdb9148aab 100644 --- a/drivers/ata/pata_isapnp.c +++ b/drivers/ata/pata_isapnp.c @@ -1,7 +1,7 @@ /* * pata-isapnp.c - ISA PnP PATA controller driver. - * Copyright 2005/2006 Red Hat Inc <alan@redhat.com>, all rights reserved. + * Copyright 2005/2006 Red Hat Inc, all rights reserved. * * Based in part on ide-pnp.c by Andrey Panin <pazke@donpac.ru> */ diff --git a/drivers/ata/pata_it821x.c b/drivers/ata/pata_it821x.c index 0221c9a46769..860ede526282 100644 --- a/drivers/ata/pata_it821x.c +++ b/drivers/ata/pata_it821x.c @@ -1,7 +1,7 @@ /* * pata_it821x.c - IT821x PATA for new ATA layer * (C) 2005 Red Hat Inc - * Alan Cox <alan@redhat.com> + * Alan Cox <alan@lxorguk.ukuu.org.uk> * (C) 2007 Bartlomiej Zolnierkiewicz * * based upon @@ -10,7 +10,7 @@ * * linux/drivers/ide/pci/it821x.c Version 0.09 December 2004 * - * Copyright (C) 2004 Red Hat <alan@redhat.com> + * Copyright (C) 2004 Red Hat * * May be copied or modified under the terms of the GNU General Public License * Based in part on the ITE vendor provided SCSI driver. @@ -557,9 +557,8 @@ static unsigned int it821x_read_id(struct ata_device *adev, if (strstr(model_num, "Integrated Technology Express")) { /* Set feature bits the firmware neglects */ id[49] |= 0x0300; /* LBA, DMA */ - id[82] |= 0x0400; /* LBA48 */ id[83] &= 0x7FFF; - id[83] |= 0x4000; /* Word 83 is valid */ + id[83] |= 0x4400; /* Word 83 is valid and LBA48 */ id[86] |= 0x0400; /* LBA48 on */ id[ATA_ID_MAJOR_VER] |= 0x1F; } diff --git a/drivers/ata/pata_jmicron.c b/drivers/ata/pata_jmicron.c index 73b7596816b4..38cf1ab2d289 100644 --- a/drivers/ata/pata_jmicron.c +++ b/drivers/ata/pata_jmicron.c @@ -4,7 +4,7 @@ * driven by AHCI in the usual configuration although * this driver can handle other setups if we need it. * - * (c) 2006 Red Hat <alan@redhat.com> + * (c) 2006 Red Hat */ #include <linux/kernel.h> diff --git a/drivers/ata/pata_legacy.c b/drivers/ata/pata_legacy.c index bc037ffce200..930c2208640b 100644 --- a/drivers/ata/pata_legacy.c +++ b/drivers/ata/pata_legacy.c @@ -1,6 +1,6 @@ /* * pata-legacy.c - Legacy port PATA/SATA controller driver. - * Copyright 2005/2006 Red Hat <alan@redhat.com>, all rights reserved. + * Copyright 2005/2006 Red Hat, all rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/drivers/ata/pata_marvell.c b/drivers/ata/pata_marvell.c index 0d87eec84966..76e399bf8c1b 100644 --- a/drivers/ata/pata_marvell.c +++ b/drivers/ata/pata_marvell.c @@ -5,7 +5,7 @@ * isn't making full use of the device functionality but it is * easy to get working. * - * (c) 2006 Red Hat <alan@redhat.com> + * (c) 2006 Red Hat */ #include <linux/kernel.h> diff --git a/drivers/ata/pata_mpiix.c b/drivers/ata/pata_mpiix.c index 7d7e3fdab71f..7c8faa48b5f3 100644 --- a/drivers/ata/pata_mpiix.c +++ b/drivers/ata/pata_mpiix.c @@ -1,7 +1,7 @@ /* * pata_mpiix.c - Intel MPIIX PATA for new ATA layer * (C) 2005-2006 Red Hat Inc - * Alan Cox <alan@redhat.com> + * Alan Cox <alan@lxorguk.ukuu.org.uk> * * The MPIIX is different enough to the PIIX4 and friends that we give it * a separate driver. The old ide/pci code handles this by just not tuning diff --git a/drivers/ata/pata_netcell.c b/drivers/ata/pata_netcell.c index d9719c8b9dbe..9dc05e1656a8 100644 --- a/drivers/ata/pata_netcell.c +++ b/drivers/ata/pata_netcell.c @@ -1,7 +1,7 @@ /* * pata_netcell.c - Netcell PATA driver * - * (c) 2006 Red Hat <alan@redhat.com> + * (c) 2006 Red Hat */ #include <linux/kernel.h> diff --git a/drivers/ata/pata_ninja32.c b/drivers/ata/pata_ninja32.c index 565e67cd13fa..4e466eae8b46 100644 --- a/drivers/ata/pata_ninja32.c +++ b/drivers/ata/pata_ninja32.c @@ -1,7 +1,6 @@ /* * pata_ninja32.c - Ninja32 PATA for new ATA layer * (C) 2007 Red Hat Inc - * Alan Cox <alan@redhat.com> * * Note: The controller like many controllers has shared timings for * PIO and DMA. We thus flip to the DMA timings in dma_start and flip back @@ -45,7 +44,7 @@ #include <linux/libata.h> #define DRV_NAME "pata_ninja32" -#define DRV_VERSION "0.0.1" +#define DRV_VERSION "0.1.1" /** @@ -89,6 +88,17 @@ static struct ata_port_operations ninja32_port_ops = { .set_piomode = ninja32_set_piomode, }; +static void ninja32_program(void __iomem *base) +{ + iowrite8(0x05, base + 0x01); /* Enable interrupt lines */ + iowrite8(0xBE, base + 0x02); /* Burst, ?? setup */ + iowrite8(0x01, base + 0x03); /* Unknown */ + iowrite8(0x20, base + 0x04); /* WAIT0 */ + iowrite8(0x8f, base + 0x05); /* Unknown */ + iowrite8(0xa4, base + 0x1c); /* Unknown */ + iowrite8(0x83, base + 0x1d); /* BMDMA control: WAIT0 */ +} + static int ninja32_init_one(struct pci_dev *dev, const struct pci_device_id *id) { struct ata_host *host; @@ -134,18 +144,28 @@ static int ninja32_init_one(struct pci_dev *dev, const struct pci_device_id *id) ap->ioaddr.bmdma_addr = base; ata_sff_std_ports(&ap->ioaddr); - iowrite8(0x05, base + 0x01); /* Enable interrupt lines */ - iowrite8(0xBE, base + 0x02); /* Burst, ?? setup */ - iowrite8(0x01, base + 0x03); /* Unknown */ - iowrite8(0x20, base + 0x04); /* WAIT0 */ - iowrite8(0x8f, base + 0x05); /* Unknown */ - iowrite8(0xa4, base + 0x1c); /* Unknown */ - iowrite8(0x83, base + 0x1d); /* BMDMA control: WAIT0 */ + ninja32_program(base); /* FIXME: Should we disable them at remove ? */ return ata_host_activate(host, dev->irq, ata_sff_interrupt, IRQF_SHARED, &ninja32_sht); } +#ifdef CONFIG_PM + +static int ninja32_reinit_one(struct pci_dev *pdev) +{ + struct ata_host *host = dev_get_drvdata(&pdev->dev); + int rc; + + rc = ata_pci_device_do_resume(pdev); + if (rc) + return rc; + ninja32_program(host->iomap[0]); + ata_host_resume(host); + return 0; +} +#endif + static const struct pci_device_id ninja32[] = { { 0x1145, 0xf021, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, { 0x1145, 0xf024, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, @@ -156,7 +176,11 @@ static struct pci_driver ninja32_pci_driver = { .name = DRV_NAME, .id_table = ninja32, .probe = ninja32_init_one, - .remove = ata_pci_remove_one + .remove = ata_pci_remove_one, +#ifdef CONFIG_PM + .suspend = ata_pci_device_suspend, + .resume = ninja32_reinit_one, +#endif }; static int __init ninja32_init(void) diff --git a/drivers/ata/pata_ns87410.c b/drivers/ata/pata_ns87410.c index be756b7ef07e..40d411c460de 100644 --- a/drivers/ata/pata_ns87410.c +++ b/drivers/ata/pata_ns87410.c @@ -1,7 +1,6 @@ /* * pata_ns87410.c - National Semiconductor 87410 PATA for new ATA layer * (C) 2006 Red Hat Inc - * Alan Cox <alan@redhat.com> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/drivers/ata/pata_ns87415.c b/drivers/ata/pata_ns87415.c index e0aa7eaaee0a..89bf5f865d6a 100644 --- a/drivers/ata/pata_ns87415.c +++ b/drivers/ata/pata_ns87415.c @@ -1,7 +1,7 @@ /* * pata_ns87415.c - NS87415 (non PARISC) PATA * - * (C) 2005 Red Hat <alan@redhat.com> + * (C) 2005 Red Hat <alan@lxorguk.ukuu.org.uk> * * This is a fairly generic MWDMA controller. It has some limitations * as it requires timing reloads on PIO/DMA transitions but it is otherwise diff --git a/drivers/ata/pata_oldpiix.c b/drivers/ata/pata_oldpiix.c index df64f2443001..c0dbc46a348e 100644 --- a/drivers/ata/pata_oldpiix.c +++ b/drivers/ata/pata_oldpiix.c @@ -1,7 +1,7 @@ /* * pata_oldpiix.c - Intel PATA/SATA controllers * - * (C) 2005 Red Hat <alan@redhat.com> + * (C) 2005 Red Hat * * Some parts based on ata_piix.c by Jeff Garzik and others. * diff --git a/drivers/ata/pata_opti.c b/drivers/ata/pata_opti.c index fb2cf661b0e8..e4fa4d565e96 100644 --- a/drivers/ata/pata_opti.c +++ b/drivers/ata/pata_opti.c @@ -1,7 +1,6 @@ /* * pata_opti.c - ATI PATA for new ATA layer * (C) 2005 Red Hat Inc - * Alan Cox <alan@redhat.com> * * Based on * linux/drivers/ide/pci/opti621.c Version 0.7 Sept 10, 2002 diff --git a/drivers/ata/pata_optidma.c b/drivers/ata/pata_optidma.c index 4cd744456313..93bb6e91973f 100644 --- a/drivers/ata/pata_optidma.c +++ b/drivers/ata/pata_optidma.c @@ -1,7 +1,6 @@ /* * pata_optidma.c - Opti DMA PATA for new ATA layer * (C) 2006 Red Hat Inc - * Alan Cox <alan@redhat.com> * * The Opti DMA controllers are related to the older PIO PCI controllers * and indeed the VLB ones. The main differences are that the timing diff --git a/drivers/ata/pata_pcmcia.c b/drivers/ata/pata_pcmcia.c index 02b596b9cf6a..271cb64d429e 100644 --- a/drivers/ata/pata_pcmcia.c +++ b/drivers/ata/pata_pcmcia.c @@ -1,6 +1,6 @@ /* * pata_pcmcia.c - PCMCIA PATA controller driver. - * Copyright 2005-2006 Red Hat Inc <alan@redhat.com>, all rights reserved. + * Copyright 2005-2006 Red Hat Inc, all rights reserved. * PCMCIA ident update Copyright 2006 Marcin Juszkiewicz * <openembedded@hrw.one.pl> * diff --git a/drivers/ata/pata_pdc202xx_old.c b/drivers/ata/pata_pdc202xx_old.c index d2673060bc8d..799a6a098712 100644 --- a/drivers/ata/pata_pdc202xx_old.c +++ b/drivers/ata/pata_pdc202xx_old.c @@ -1,7 +1,7 @@ /* * pata_pdc202xx_old.c - Promise PDC202xx PATA for new ATA layer * (C) 2005 Red Hat Inc - * Alan Cox <alan@redhat.com> + * Alan Cox <alan@lxorguk.ukuu.org.uk> * (C) 2007 Bartlomiej Zolnierkiewicz * * Based in part on linux/drivers/ide/pci/pdc202xx_old.c diff --git a/drivers/ata/pata_platform.c b/drivers/ata/pata_platform.c index 8f65ad61b8af..77e4e3b17f54 100644 --- a/drivers/ata/pata_platform.c +++ b/drivers/ata/pata_platform.c @@ -5,7 +5,7 @@ * * Based on pata_pcmcia: * - * Copyright 2005-2006 Red Hat Inc <alan@redhat.com>, all rights reserved. + * Copyright 2005-2006 Red Hat Inc, all rights reserved. * * This file is subject to the terms and conditions of the GNU General Public * License. See the file "COPYING" in the main directory of this archive diff --git a/drivers/ata/pata_qdi.c b/drivers/ata/pata_qdi.c index 63b7a1c165a5..3080f371222c 100644 --- a/drivers/ata/pata_qdi.c +++ b/drivers/ata/pata_qdi.c @@ -1,6 +1,6 @@ /* * pata_qdi.c - QDI VLB ATA controllers - * (C) 2006 Red Hat <alan@redhat.com> + * (C) 2006 Red Hat * * This driver mostly exists as a proof of concept for non PCI devices under * libata. While the QDI6580 was 'neat' in 1993 it is no longer terribly diff --git a/drivers/ata/pata_radisys.c b/drivers/ata/pata_radisys.c index 1c0d9fa7ee54..0b0aa452de14 100644 --- a/drivers/ata/pata_radisys.c +++ b/drivers/ata/pata_radisys.c @@ -1,7 +1,7 @@ /* * pata_radisys.c - Intel PATA/SATA controllers * - * (C) 2006 Red Hat <alan@redhat.com> + * (C) 2006 Red Hat <alan@lxorguk.ukuu.org.uk> * * Some parts based on ata_piix.c by Jeff Garzik and others. * diff --git a/drivers/ata/pata_sc1200.c b/drivers/ata/pata_sc1200.c index 0278fd2b8fb1..9a4bdca54616 100644 --- a/drivers/ata/pata_sc1200.c +++ b/drivers/ata/pata_sc1200.c @@ -1,5 +1,5 @@ /* - * New ATA layer SC1200 driver Alan Cox <alan@redhat.com> + * New ATA layer SC1200 driver Alan Cox <alan@lxorguk.ukuu.org.uk> * * TODO: Mode selection filtering * TODO: Can't enable second channel until ATA core has serialize diff --git a/drivers/ata/pata_scc.c b/drivers/ata/pata_scc.c index 16673d168573..cf3707e516a2 100644 --- a/drivers/ata/pata_scc.c +++ b/drivers/ata/pata_scc.c @@ -8,7 +8,7 @@ * Copyright 2003-2005 Jeff Garzik * Copyright (C) 1998-1999 Andrzej Krzysztofowicz, Author and Maintainer * Copyright (C) 1998-2000 Andre Hedrick <andre@linux-ide.org> - * Copyright (C) 2003 Red Hat Inc <alan@redhat.com> + * Copyright (C) 2003 Red Hat Inc * * and drivers/ata/ahci.c: * Copyright 2004-2005 Red Hat, Inc. diff --git a/drivers/ata/pata_serverworks.c b/drivers/ata/pata_serverworks.c index ffd26d0dc50d..72e41c9f969b 100644 --- a/drivers/ata/pata_serverworks.c +++ b/drivers/ata/pata_serverworks.c @@ -1,7 +1,6 @@ /* * pata_serverworks.c - Serverworks PATA for new ATA layer * (C) 2005 Red Hat Inc - * Alan Cox <alan@redhat.com> * * based upon * diff --git a/drivers/ata/pata_sil680.c b/drivers/ata/pata_sil680.c index a598bb36aafc..83580a59db58 100644 --- a/drivers/ata/pata_sil680.c +++ b/drivers/ata/pata_sil680.c @@ -1,7 +1,6 @@ /* * pata_sil680.c - SIL680 PATA for new ATA layer * (C) 2005 Red Hat Inc - * Alan Cox <alan@redhat.com> * * based upon * diff --git a/drivers/ata/pata_sis.c b/drivers/ata/pata_sis.c index 26345d7b531c..d34236611752 100644 --- a/drivers/ata/pata_sis.c +++ b/drivers/ata/pata_sis.c @@ -1,7 +1,7 @@ /* * pata_sis.c - SiS ATA driver * - * (C) 2005 Red Hat <alan@redhat.com> + * (C) 2005 Red Hat * (C) 2007 Bartlomiej Zolnierkiewicz * * Based upon linux/drivers/ide/pci/sis5513.c diff --git a/drivers/ata/pata_sl82c105.c b/drivers/ata/pata_sl82c105.c index 69877bd81815..1b0e7b6d8ef5 100644 --- a/drivers/ata/pata_sl82c105.c +++ b/drivers/ata/pata_sl82c105.c @@ -1,7 +1,6 @@ /* * pata_sl82c105.c - SL82C105 PATA for new ATA layer * (C) 2005 Red Hat Inc - * Alan Cox <alan@redhat.com> * * Based in part on linux/drivers/ide/pci/sl82c105.c * SL82C105/Winbond 553 IDE driver diff --git a/drivers/ata/pata_triflex.c b/drivers/ata/pata_triflex.c index b181261f2743..ef9597517cdd 100644 --- a/drivers/ata/pata_triflex.c +++ b/drivers/ata/pata_triflex.c @@ -1,7 +1,7 @@ /* * pata_triflex.c - Compaq PATA for new ATA layer * (C) 2005 Red Hat Inc - * Alan Cox <alan@redhat.com> + * Alan Cox <alan@lxorguk.ukuu.org.uk> * * based upon * diff --git a/drivers/ata/pata_via.c b/drivers/ata/pata_via.c index 8fdb2ce73210..681169c9c640 100644 --- a/drivers/ata/pata_via.c +++ b/drivers/ata/pata_via.c @@ -1,7 +1,6 @@ /* * pata_via.c - VIA PATA for new ATA layer * (C) 2005-2006 Red Hat Inc - * Alan Cox <alan@redhat.com> * * Documentation * Most chipset documentation available under NDA only diff --git a/drivers/ata/pata_winbond.c b/drivers/ata/pata_winbond.c index a7606b044a61..319e164a3d74 100644 --- a/drivers/ata/pata_winbond.c +++ b/drivers/ata/pata_winbond.c @@ -1,6 +1,6 @@ /* * pata_winbond.c - Winbond VLB ATA controllers - * (C) 2006 Red Hat <alan@redhat.com> + * (C) 2006 Red Hat * * Support for the Winbond 83759A when operating in advanced mode. * Multichip mode is not currently supported. diff --git a/drivers/ata/sata_sil24.c b/drivers/ata/sata_sil24.c index 4621807a1a6a..ccee930f1e12 100644 --- a/drivers/ata/sata_sil24.c +++ b/drivers/ata/sata_sil24.c @@ -1329,6 +1329,11 @@ static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) } } + /* Set max read request size to 4096. This slightly increases + * write throughput for pci-e variants. + */ + pcie_set_readrq(pdev, 4096); + sil24_init_controller(host); pci_set_master(pdev); diff --git a/drivers/bluetooth/btsdio.c b/drivers/bluetooth/btsdio.c index 58630cc1eff2..cda6c7cc944b 100644 --- a/drivers/bluetooth/btsdio.c +++ b/drivers/bluetooth/btsdio.c @@ -152,7 +152,7 @@ static int btsdio_rx_packet(struct btsdio_data *data) err = sdio_readsb(data->func, skb->data, REG_RDAT, len - 4); if (err < 0) { - kfree(skb); + kfree_skb(skb); return err; } diff --git a/drivers/char/amiserial.c b/drivers/char/amiserial.c index 98821f97583c..b97aebd7aeb8 100644 --- a/drivers/char/amiserial.c +++ b/drivers/char/amiserial.c @@ -2071,12 +2071,13 @@ module_init(rs_init) module_exit(rs_exit) +#if defined(CONFIG_SERIAL_CONSOLE) && !defined(MODULE) + /* * ------------------------------------------------------------ * Serial console driver * ------------------------------------------------------------ */ -#ifdef CONFIG_SERIAL_CONSOLE static void amiga_serial_putc(char c) { @@ -2130,6 +2131,7 @@ static int __init amiserial_console_init(void) return 0; } console_initcall(amiserial_console_init); -#endif + +#endif /* CONFIG_SERIAL_CONSOLE && !MODULE */ MODULE_LICENSE("GPL"); diff --git a/drivers/char/hw_random/amd-rng.c b/drivers/char/hw_random/amd-rng.c index c422e870dc52..cd0ba51f7c80 100644 --- a/drivers/char/hw_random/amd-rng.c +++ b/drivers/char/hw_random/amd-rng.c @@ -11,7 +11,7 @@ * derived from * * Hardware driver for the AMD 768 Random Number Generator (RNG) - * (c) Copyright 2001 Red Hat Inc <alan@redhat.com> + * (c) Copyright 2001 Red Hat Inc * * derived from * diff --git a/drivers/char/hw_random/geode-rng.c b/drivers/char/hw_random/geode-rng.c index fed4ef5569f5..64d513f68368 100644 --- a/drivers/char/hw_random/geode-rng.c +++ b/drivers/char/hw_random/geode-rng.c @@ -11,7 +11,7 @@ * derived from * * Hardware driver for the AMD 768 Random Number Generator (RNG) - * (c) Copyright 2001 Red Hat Inc <alan@redhat.com> + * (c) Copyright 2001 Red Hat Inc * * derived from * diff --git a/drivers/char/hw_random/intel-rng.c b/drivers/char/hw_random/intel-rng.c index 8a2fce0756ec..5dcbe603eca2 100644 --- a/drivers/char/hw_random/intel-rng.c +++ b/drivers/char/hw_random/intel-rng.c @@ -11,7 +11,7 @@ * derived from * * Hardware driver for the AMD 768 Random Number Generator (RNG) - * (c) Copyright 2001 Red Hat Inc <alan@redhat.com> + * (c) Copyright 2001 Red Hat Inc * * derived from * diff --git a/drivers/char/hw_random/via-rng.c b/drivers/char/hw_random/via-rng.c index 128202e18fc9..4e9573c1d39e 100644 --- a/drivers/char/hw_random/via-rng.c +++ b/drivers/char/hw_random/via-rng.c @@ -11,7 +11,7 @@ * derived from * * Hardware driver for the AMD 768 Random Number Generator (RNG) - * (c) Copyright 2001 Red Hat Inc <alan@redhat.com> + * (c) Copyright 2001 Red Hat Inc * * derived from * diff --git a/drivers/dma/ioat_dma.c b/drivers/dma/ioat_dma.c index 43b8cefad2c6..b0438c4f0c30 100644 --- a/drivers/dma/ioat_dma.c +++ b/drivers/dma/ioat_dma.c @@ -33,6 +33,7 @@ #include <linux/delay.h> #include <linux/dma-mapping.h> #include <linux/workqueue.h> +#include <linux/i7300_idle.h> #include "ioatdma.h" #include "ioatdma_registers.h" #include "ioatdma_hw.h" @@ -171,8 +172,10 @@ static int ioat_dma_enumerate_channels(struct ioatdma_device *device) xfercap_scale = readb(device->reg_base + IOAT_XFERCAP_OFFSET); xfercap = (xfercap_scale == 0 ? -1 : (1UL << xfercap_scale)); -#if CONFIG_I7300_IDLE_IOAT_CHANNEL - device->common.chancnt--; +#ifdef CONFIG_I7300_IDLE_IOAT_CHANNEL + if (i7300_idle_platform_probe(NULL, NULL) == 0) { + device->common.chancnt--; + } #endif for (i = 0; i < device->common.chancnt; i++) { ioat_chan = kzalloc(sizeof(*ioat_chan), GFP_KERNEL); diff --git a/drivers/firewire/fw-ohci.c b/drivers/firewire/fw-ohci.c index 251416f2148f..8e16bfbdcb3d 100644 --- a/drivers/firewire/fw-ohci.c +++ b/drivers/firewire/fw-ohci.c @@ -476,6 +476,7 @@ static int ar_context_add_page(struct ar_context *ctx) if (ab == NULL) return -ENOMEM; + ab->next = NULL; memset(&ab->descriptor, 0, sizeof(ab->descriptor)); ab->descriptor.control = cpu_to_le16(DESCRIPTOR_INPUT_MORE | DESCRIPTOR_STATUS | @@ -496,6 +497,21 @@ static int ar_context_add_page(struct ar_context *ctx) return 0; } +static void ar_context_release(struct ar_context *ctx) +{ + struct ar_buffer *ab, *ab_next; + size_t offset; + dma_addr_t ab_bus; + + for (ab = ctx->current_buffer; ab; ab = ab_next) { + ab_next = ab->next; + offset = offsetof(struct ar_buffer, data); + ab_bus = le32_to_cpu(ab->descriptor.data_address) - offset; + dma_free_coherent(ctx->ohci->card.device, PAGE_SIZE, + ab, ab_bus); + } +} + #if defined(CONFIG_PPC_PMAC) && defined(CONFIG_PPC32) #define cond_le32_to_cpu(v) \ (ohci->old_uninorth ? (__force __u32)(v) : le32_to_cpu(v)) @@ -2349,8 +2365,8 @@ pci_probe(struct pci_dev *dev, const struct pci_device_id *ent) ohci = kzalloc(sizeof(*ohci), GFP_KERNEL); if (ohci == NULL) { - fw_error("Could not malloc fw_ohci data.\n"); - return -ENOMEM; + err = -ENOMEM; + goto fail; } fw_card_initialize(&ohci->card, &ohci_driver, &dev->dev); @@ -2359,7 +2375,7 @@ pci_probe(struct pci_dev *dev, const struct pci_device_id *ent) err = pci_enable_device(dev); if (err) { - fw_error("Failed to enable OHCI hardware.\n"); + fw_error("Failed to enable OHCI hardware\n"); goto fail_free; } @@ -2427,9 +2443,8 @@ pci_probe(struct pci_dev *dev, const struct pci_device_id *ent) ohci->ir_context_list = kzalloc(size, GFP_KERNEL); if (ohci->it_context_list == NULL || ohci->ir_context_list == NULL) { - fw_error("Out of memory for it/ir contexts.\n"); err = -ENOMEM; - goto fail_registers; + goto fail_contexts; } /* self-id dma buffer allocation */ @@ -2438,9 +2453,8 @@ pci_probe(struct pci_dev *dev, const struct pci_device_id *ent) &ohci->self_id_bus, GFP_KERNEL); if (ohci->self_id_cpu == NULL) { - fw_error("Out of memory for self ID buffer.\n"); err = -ENOMEM; - goto fail_registers; + goto fail_contexts; } bus_options = reg_read(ohci, OHCI1394_BusOptions); @@ -2460,9 +2474,13 @@ pci_probe(struct pci_dev *dev, const struct pci_device_id *ent) fail_self_id: dma_free_coherent(ohci->card.device, SELF_ID_BUF_SIZE, ohci->self_id_cpu, ohci->self_id_bus); - fail_registers: - kfree(ohci->it_context_list); + fail_contexts: kfree(ohci->ir_context_list); + kfree(ohci->it_context_list); + context_release(&ohci->at_response_ctx); + context_release(&ohci->at_request_ctx); + ar_context_release(&ohci->ar_response_ctx); + ar_context_release(&ohci->ar_request_ctx); pci_iounmap(dev, ohci->registers); fail_iomem: pci_release_region(dev, 0); @@ -2471,6 +2489,9 @@ pci_probe(struct pci_dev *dev, const struct pci_device_id *ent) fail_free: kfree(&ohci->card); ohci_pmac_off(dev); + fail: + if (err == -ENOMEM) + fw_error("Out of memory\n"); return err; } @@ -2491,8 +2512,19 @@ static void pci_remove(struct pci_dev *dev) software_reset(ohci); free_irq(dev->irq, ohci); + + if (ohci->next_config_rom && ohci->next_config_rom != ohci->config_rom) + dma_free_coherent(ohci->card.device, CONFIG_ROM_SIZE, + ohci->next_config_rom, ohci->next_config_rom_bus); + if (ohci->config_rom) + dma_free_coherent(ohci->card.device, CONFIG_ROM_SIZE, + ohci->config_rom, ohci->config_rom_bus); dma_free_coherent(ohci->card.device, SELF_ID_BUF_SIZE, ohci->self_id_cpu, ohci->self_id_bus); + ar_context_release(&ohci->ar_request_ctx); + ar_context_release(&ohci->ar_response_ctx); + context_release(&ohci->at_request_ctx); + context_release(&ohci->at_response_ctx); kfree(ohci->it_context_list); kfree(ohci->ir_context_list); pci_iounmap(dev, ohci->registers); diff --git a/drivers/firewire/fw-sbp2.c b/drivers/firewire/fw-sbp2.c index ef0b9b419c27..d334cac5e1fc 100644 --- a/drivers/firewire/fw-sbp2.c +++ b/drivers/firewire/fw-sbp2.c @@ -173,6 +173,9 @@ struct sbp2_target { int blocked; /* ditto */ }; +/* Impossible login_id, to detect logout attempt before successful login */ +#define INVALID_LOGIN_ID 0x10000 + /* * Per section 7.4.8 of the SBP-2 spec, a mgt_ORB_timeout value can be * provided in the config rom. Most devices do provide a value, which @@ -788,9 +791,20 @@ static void sbp2_release_target(struct kref *kref) scsi_remove_device(sdev); scsi_device_put(sdev); } - sbp2_send_management_orb(lu, tgt->node_id, lu->generation, - SBP2_LOGOUT_REQUEST, lu->login_id, NULL); - + if (lu->login_id != INVALID_LOGIN_ID) { + int generation, node_id; + /* + * tgt->node_id may be obsolete here if we failed + * during initial login or after a bus reset where + * the topology changed. + */ + generation = device->generation; + smp_rmb(); /* node_id vs. generation */ + node_id = device->node_id; + sbp2_send_management_orb(lu, node_id, generation, + SBP2_LOGOUT_REQUEST, + lu->login_id, NULL); + } fw_core_remove_address_handler(&lu->address_handler); list_del(&lu->link); kfree(lu); @@ -805,19 +819,20 @@ static void sbp2_release_target(struct kref *kref) static struct workqueue_struct *sbp2_wq; +static void sbp2_target_put(struct sbp2_target *tgt) +{ + kref_put(&tgt->kref, sbp2_release_target); +} + /* * Always get the target's kref when scheduling work on one its units. * Each workqueue job is responsible to call sbp2_target_put() upon return. */ static void sbp2_queue_work(struct sbp2_logical_unit *lu, unsigned long delay) { - if (queue_delayed_work(sbp2_wq, &lu->work, delay)) - kref_get(&lu->tgt->kref); -} - -static void sbp2_target_put(struct sbp2_target *tgt) -{ - kref_put(&tgt->kref, sbp2_release_target); + kref_get(&lu->tgt->kref); + if (!queue_delayed_work(sbp2_wq, &lu->work, delay)) + sbp2_target_put(lu->tgt); } /* @@ -978,6 +993,7 @@ static int sbp2_add_logical_unit(struct sbp2_target *tgt, int lun_entry) lu->tgt = tgt; lu->lun = lun_entry & 0xffff; + lu->login_id = INVALID_LOGIN_ID; lu->retries = 0; lu->has_sdev = false; lu->blocked = false; @@ -1147,7 +1163,7 @@ static int sbp2_probe(struct device *dev) /* Do the login in a workqueue so we can easily reschedule retries. */ list_for_each_entry(lu, &tgt->lu_list, link) - sbp2_queue_work(lu, 0); + sbp2_queue_work(lu, DIV_ROUND_UP(HZ, 5)); return 0; fail_tgt_put: diff --git a/drivers/firewire/fw-topology.c b/drivers/firewire/fw-topology.c index c1b81077c4a8..5e204713002d 100644 --- a/drivers/firewire/fw-topology.c +++ b/drivers/firewire/fw-topology.c @@ -413,7 +413,7 @@ static void update_tree(struct fw_card *card, struct fw_node *root) { struct list_head list0, list1; - struct fw_node *node0, *node1; + struct fw_node *node0, *node1, *next1; int i, event; INIT_LIST_HEAD(&list0); @@ -485,7 +485,9 @@ update_tree(struct fw_card *card, struct fw_node *root) } node0 = fw_node(node0->link.next); - node1 = fw_node(node1->link.next); + next1 = fw_node(node1->link.next); + fw_node_put(node1); + node1 = next1; } } diff --git a/drivers/firewire/fw-transaction.h b/drivers/firewire/fw-transaction.h index 027f58ce81ad..aed7dbb17cda 100644 --- a/drivers/firewire/fw-transaction.h +++ b/drivers/firewire/fw-transaction.h @@ -248,7 +248,7 @@ struct fw_card { struct fw_node *local_node; struct fw_node *root_node; struct fw_node *irm_node; - int color; + u8 color; /* must be u8 to match the definition in struct fw_node */ int gap_count; bool beta_repeaters_present; diff --git a/drivers/hid/Kconfig b/drivers/hid/Kconfig index f5999a91614e..b4fd8ca701a4 100644 --- a/drivers/hid/Kconfig +++ b/drivers/hid/Kconfig @@ -247,7 +247,6 @@ config HID_SUNPLUS config THRUSTMASTER_FF tristate "ThrustMaster devices support" - default m depends on USB_HID select INPUT_FF_MEMLESS help @@ -256,7 +255,6 @@ config THRUSTMASTER_FF config ZEROPLUS_FF tristate "Zeroplus based game controller support" - default m depends on USB_HID select INPUT_FF_MEMLESS help diff --git a/drivers/hid/hid-apple.c b/drivers/hid/hid-apple.c index fd7f896b34f7..c6ab4ba60c52 100644 --- a/drivers/hid/hid-apple.c +++ b/drivers/hid/hid-apple.c @@ -312,13 +312,6 @@ static int apple_probe(struct hid_device *hdev, unsigned int connect_mask = HID_CONNECT_DEFAULT; int ret; - /* return something else or move to hid layer? device will reside - allocated */ - if (id->bus == BUS_USB && (quirks & APPLE_IGNORE_MOUSE) && - to_usb_interface(hdev->dev.parent)->cur_altsetting-> - desc.bInterfaceProtocol == USB_INTERFACE_PROTOCOL_MOUSE) - return -ENODEV; - asc = kzalloc(sizeof(*asc), GFP_KERNEL); if (asc == NULL) { dev_err(&hdev->dev, "can't alloc apple descriptor\n"); @@ -367,38 +360,32 @@ static const struct hid_device_id apple_devices[] = { .driver_data = APPLE_MIGHTYMOUSE | APPLE_INVERT_HWHEEL }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_FOUNTAIN_ANSI), - .driver_data = APPLE_NUMLOCK_EMULATION | APPLE_HAS_FN | - APPLE_IGNORE_MOUSE }, + .driver_data = APPLE_NUMLOCK_EMULATION | APPLE_HAS_FN }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_FOUNTAIN_ISO), - .driver_data = APPLE_NUMLOCK_EMULATION | APPLE_HAS_FN | - APPLE_IGNORE_MOUSE }, + .driver_data = APPLE_NUMLOCK_EMULATION | APPLE_HAS_FN }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER_ANSI), - .driver_data = APPLE_NUMLOCK_EMULATION | APPLE_HAS_FN | - APPLE_IGNORE_MOUSE }, + .driver_data = APPLE_NUMLOCK_EMULATION | APPLE_HAS_FN }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER_ISO), .driver_data = APPLE_NUMLOCK_EMULATION | APPLE_HAS_FN | - APPLE_IGNORE_MOUSE | APPLE_ISO_KEYBOARD }, + APPLE_ISO_KEYBOARD }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER_JIS), - .driver_data = APPLE_NUMLOCK_EMULATION | APPLE_HAS_FN | - APPLE_IGNORE_MOUSE }, + .driver_data = APPLE_NUMLOCK_EMULATION | APPLE_HAS_FN }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER3_ANSI), - .driver_data = APPLE_NUMLOCK_EMULATION | APPLE_HAS_FN | - APPLE_IGNORE_MOUSE }, + .driver_data = APPLE_NUMLOCK_EMULATION | APPLE_HAS_FN }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER3_ISO), .driver_data = APPLE_NUMLOCK_EMULATION | APPLE_HAS_FN | - APPLE_IGNORE_MOUSE | APPLE_ISO_KEYBOARD }, + APPLE_ISO_KEYBOARD }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER3_JIS), .driver_data = APPLE_NUMLOCK_EMULATION | APPLE_HAS_FN | - APPLE_IGNORE_MOUSE | APPLE_RDESC_JIS }, + APPLE_RDESC_JIS }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER4_ANSI), - .driver_data = APPLE_NUMLOCK_EMULATION | APPLE_HAS_FN | - APPLE_IGNORE_MOUSE }, + .driver_data = APPLE_NUMLOCK_EMULATION | APPLE_HAS_FN }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER4_ISO), .driver_data = APPLE_NUMLOCK_EMULATION | APPLE_HAS_FN | - APPLE_IGNORE_MOUSE | APPLE_ISO_KEYBOARD }, + APPLE_ISO_KEYBOARD }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER4_JIS), .driver_data = APPLE_NUMLOCK_EMULATION | APPLE_HAS_FN | - APPLE_IGNORE_MOUSE | APPLE_RDESC_JIS}, + APPLE_RDESC_JIS }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_ANSI), .driver_data = APPLE_HAS_FN }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_ISO), @@ -406,14 +393,12 @@ static const struct hid_device_id apple_devices[] = { { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_JIS), .driver_data = APPLE_HAS_FN }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER4_HF_ANSI), - .driver_data = APPLE_NUMLOCK_EMULATION | APPLE_HAS_FN | - APPLE_IGNORE_MOUSE }, + .driver_data = APPLE_NUMLOCK_EMULATION | APPLE_HAS_FN }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER4_HF_ISO), - .driver_data = APPLE_NUMLOCK_EMULATION | APPLE_HAS_FN | - APPLE_IGNORE_MOUSE }, + .driver_data = APPLE_NUMLOCK_EMULATION | APPLE_HAS_FN }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER4_HF_JIS), .driver_data = APPLE_NUMLOCK_EMULATION | APPLE_HAS_FN | - APPLE_IGNORE_MOUSE | APPLE_RDESC_JIS }, + APPLE_RDESC_JIS }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_ANSI), .driver_data = APPLE_NUMLOCK_EMULATION | APPLE_HAS_FN }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_ISO), @@ -422,25 +407,21 @@ static const struct hid_device_id apple_devices[] = { { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_JIS), .driver_data = APPLE_NUMLOCK_EMULATION | APPLE_HAS_FN }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING_ANSI), - .driver_data = APPLE_HAS_FN | APPLE_IGNORE_MOUSE }, + .driver_data = APPLE_HAS_FN }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING_ISO), - .driver_data = APPLE_HAS_FN | APPLE_ISO_KEYBOARD | - APPLE_IGNORE_MOUSE }, + .driver_data = APPLE_HAS_FN | APPLE_ISO_KEYBOARD }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING_JIS), - .driver_data = APPLE_HAS_FN | APPLE_IGNORE_MOUSE | APPLE_RDESC_JIS }, + .driver_data = APPLE_HAS_FN | APPLE_RDESC_JIS }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING2_ANSI), - .driver_data = APPLE_HAS_FN | APPLE_IGNORE_MOUSE }, + .driver_data = APPLE_HAS_FN }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING2_ISO), - .driver_data = APPLE_HAS_FN | APPLE_ISO_KEYBOARD | - APPLE_IGNORE_MOUSE }, + .driver_data = APPLE_HAS_FN | APPLE_ISO_KEYBOARD }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING2_JIS), - .driver_data = APPLE_HAS_FN | APPLE_IGNORE_MOUSE | APPLE_RDESC_JIS }, + .driver_data = APPLE_HAS_FN | APPLE_RDESC_JIS }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_FOUNTAIN_TP_ONLY), - .driver_data = APPLE_NUMLOCK_EMULATION | APPLE_HAS_FN | - APPLE_IGNORE_MOUSE }, + .driver_data = APPLE_NUMLOCK_EMULATION | APPLE_HAS_FN }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER1_TP_ONLY), - .driver_data = APPLE_NUMLOCK_EMULATION | APPLE_HAS_FN | - APPLE_IGNORE_MOUSE }, + .driver_data = APPLE_NUMLOCK_EMULATION | APPLE_HAS_FN }, /* Apple wireless Mighty Mouse */ { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, 0x030c), diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c index 721a36d97582..743e6f8cb202 100644 --- a/drivers/hid/hid-core.c +++ b/drivers/hid/hid-core.c @@ -1264,6 +1264,7 @@ static const struct hid_device_id hid_blacklist[] = { { HID_USB_DEVICE(USB_VENDOR_ID_DELL, USB_DEVICE_ID_DELL_SK8115) }, { HID_USB_DEVICE(USB_VENDOR_ID_EZKEY, USB_DEVICE_ID_BTC_8193) }, { HID_USB_DEVICE(USB_VENDOR_ID_GYRATION, USB_DEVICE_ID_GYRATION_REMOTE) }, + { HID_USB_DEVICE(USB_VENDOR_ID_GYRATION, USB_DEVICE_ID_GYRATION_REMOTE_2) }, { HID_USB_DEVICE(USB_VENDOR_ID_LABTEC, USB_DEVICE_ID_LABTEC_WIRELESS_KEYBOARD) }, { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_MX3000_RECEIVER) }, { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_S510_RECEIVER) }, @@ -1275,8 +1276,6 @@ static const struct hid_device_id hid_blacklist[] = { { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_KBD) }, { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_ELITE_KBD) }, { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_CORDLESS_DESKTOP_LX500) }, - { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_LX3) }, - { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_V150) }, { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_EXTREME_3D) }, { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_WHEEL) }, { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_RUMBLEPAD) }, @@ -1295,6 +1294,7 @@ static const struct hid_device_id hid_blacklist[] = { { HID_USB_DEVICE(USB_VENDOR_ID_PETALYNX, USB_DEVICE_ID_PETALYNX_MAXTER_REMOTE) }, { HID_USB_DEVICE(USB_VENDOR_ID_SAMSUNG, USB_DEVICE_ID_SAMSUNG_IR_REMOTE) }, { HID_USB_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_PS3_CONTROLLER) }, + { HID_USB_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_VAIO_VGX_MOUSE) }, { HID_USB_DEVICE(USB_VENDOR_ID_SUNPLUS, USB_DEVICE_ID_SUNPLUS_WDESKTOP) }, { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, 0x030c) }, @@ -1406,6 +1406,7 @@ static const struct hid_device_id hid_ignore_list[] = { { HID_USB_DEVICE(USB_VENDOR_ID_AIRCABLE, USB_DEVICE_ID_AIRCABLE1) }, { HID_USB_DEVICE(USB_VENDOR_ID_ALCOR, USB_DEVICE_ID_ALCOR_USBRS232) }, { HID_USB_DEVICE(USB_VENDOR_ID_ASUS, USB_DEVICE_ID_ASUS_LCM)}, + { HID_USB_DEVICE(USB_VENDOR_ID_ASUS, USB_DEVICE_ID_ASUS_LCM2)}, { HID_USB_DEVICE(USB_VENDOR_ID_BERKSHIRE, USB_DEVICE_ID_BERKSHIRE_PCWD) }, { HID_USB_DEVICE(USB_VENDOR_ID_CIDC, 0x0103) }, { HID_USB_DEVICE(USB_VENDOR_ID_CYGNAL, USB_DEVICE_ID_CYGNAL_RADIO_SI470X) }, @@ -1541,6 +1542,40 @@ static const struct hid_device_id hid_ignore_list[] = { { } }; +/** + * hid_mouse_ignore_list - mouse devices which should not be handled by the hid layer + * + * There are composite devices for which we want to ignore only a certain + * interface. This is a list of devices for which only the mouse interface will + * be ignored. This allows a dedicated driver to take care of the interface. + */ +static const struct hid_device_id hid_mouse_ignore_list[] = { + /* appletouch driver */ + { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_FOUNTAIN_ANSI) }, + { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_FOUNTAIN_ISO) }, + { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER_ANSI) }, + { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER_ISO) }, + { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER_JIS) }, + { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER3_ANSI) }, + { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER3_ISO) }, + { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER3_JIS) }, + { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER4_ANSI) }, + { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER4_ISO) }, + { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER4_JIS) }, + { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER4_HF_ANSI) }, + { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER4_HF_ISO) }, + { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER4_HF_JIS) }, + { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING_ANSI) }, + { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING_ISO) }, + { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING_JIS) }, + { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING2_ANSI) }, + { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING2_ISO) }, + { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING2_JIS) }, + { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_FOUNTAIN_TP_ONLY) }, + { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER1_TP_ONLY) }, + { } +}; + static bool hid_ignore(struct hid_device *hdev) { switch (hdev->vendor) { @@ -1557,6 +1592,10 @@ static bool hid_ignore(struct hid_device *hdev) break; } + if (hdev->type == HID_TYPE_USBMOUSE && + hid_match_id(hdev, hid_mouse_ignore_list)) + return true; + return !!hid_match_id(hdev, hid_ignore_list); } diff --git a/drivers/hid/hid-gyration.c b/drivers/hid/hid-gyration.c index ac5120f542cc..04a0afec52ac 100644 --- a/drivers/hid/hid-gyration.c +++ b/drivers/hid/hid-gyration.c @@ -4,9 +4,9 @@ * Copyright (c) 1999 Andreas Gal * Copyright (c) 2000-2005 Vojtech Pavlik <vojtech@suse.cz> * Copyright (c) 2005 Michael Haboustak <mike-@cinci.rr.com> for Concept2, Inc - * Copyright (c) 2006-2007 Jiri Kosina * Copyright (c) 2007 Paul Walmsley * Copyright (c) 2008 Jiri Slaby + * Copyright (c) 2006-2008 Jiri Kosina */ /* @@ -40,6 +40,7 @@ static int gyration_input_mapping(struct hid_device *hdev, struct hid_input *hi, case 0x025: gy_map_key_clear(KEY_PVR); break; case 0x046: gy_map_key_clear(KEY_MEDIA); break; case 0x047: gy_map_key_clear(KEY_MP3); break; + case 0x048: gy_map_key_clear(KEY_MEDIA); break; case 0x049: gy_map_key_clear(KEY_CAMERA); break; case 0x04a: gy_map_key_clear(KEY_VIDEO); break; @@ -68,6 +69,7 @@ static int gyration_event(struct hid_device *hdev, struct hid_field *field, static const struct hid_device_id gyration_devices[] = { { HID_USB_DEVICE(USB_VENDOR_ID_GYRATION, USB_DEVICE_ID_GYRATION_REMOTE) }, + { HID_USB_DEVICE(USB_VENDOR_ID_GYRATION, USB_DEVICE_ID_GYRATION_REMOTE_2) }, { } }; MODULE_DEVICE_TABLE(hid, gyration_devices); diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h index d9a1ba920c23..a0d6a6cb1842 100644 --- a/drivers/hid/hid-ids.h +++ b/drivers/hid/hid-ids.h @@ -89,6 +89,7 @@ #define USB_VENDOR_ID_ASUS 0x0b05 #define USB_DEVICE_ID_ASUS_LCM 0x1726 +#define USB_DEVICE_ID_ASUS_LCM2 0x175b #define USB_VENDOR_ID_ATEN 0x0557 #define USB_DEVICE_ID_ATEN_UC100KM 0x2004 @@ -236,6 +237,7 @@ #define USB_VENDOR_ID_GYRATION 0x0c16 #define USB_DEVICE_ID_GYRATION_REMOTE 0x0002 +#define USB_DEVICE_ID_GYRATION_REMOTE_2 0x0003 #define USB_VENDOR_ID_HAPP 0x078b #define USB_DEVICE_ID_UGCI_DRIVING 0x0010 @@ -268,8 +270,6 @@ #define USB_DEVICE_ID_LD_MACHINETEST 0x2040 #define USB_VENDOR_ID_LOGITECH 0x046d -#define USB_DEVICE_ID_LOGITECH_LX3 0xc044 -#define USB_DEVICE_ID_LOGITECH_V150 0xc047 #define USB_DEVICE_ID_LOGITECH_RECEIVER 0xc101 #define USB_DEVICE_ID_LOGITECH_HARMONY_FIRST 0xc110 #define USB_DEVICE_ID_LOGITECH_HARMONY_LAST 0xc14f @@ -350,6 +350,7 @@ #define USB_DEVICE_ID_SAMSUNG_IR_REMOTE 0x0001 #define USB_VENDOR_ID_SONY 0x054c +#define USB_DEVICE_ID_SONY_VAIO_VGX_MOUSE 0x024b #define USB_DEVICE_ID_SONY_PS3_CONTROLLER 0x0268 #define USB_VENDOR_ID_SOUNDGRAPH 0x15c2 diff --git a/drivers/hid/hid-lg.c b/drivers/hid/hid-lg.c index 406d8c82abf1..2bae340eafe2 100644 --- a/drivers/hid/hid-lg.c +++ b/drivers/hid/hid-lg.c @@ -287,11 +287,6 @@ static const struct hid_device_id lg_devices[] = { { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_CORDLESS_DESKTOP_LX500), .driver_data = LG_IGNORE_DOUBLED_WHEEL | LG_EXPANDED_KEYMAP }, - { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_LX3), - .driver_data = LG_INVERT_HWHEEL }, - { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_V150), - .driver_data = LG_INVERT_HWHEEL }, - { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_EXTREME_3D), .driver_data = LG_NOGET }, { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_WHEEL), diff --git a/drivers/hid/hid-sony.c b/drivers/hid/hid-sony.c index 3af8095a7de1..86e563b8d644 100644 --- a/drivers/hid/hid-sony.c +++ b/drivers/hid/hid-sony.c @@ -4,9 +4,9 @@ * Copyright (c) 1999 Andreas Gal * Copyright (c) 2000-2005 Vojtech Pavlik <vojtech@suse.cz> * Copyright (c) 2005 Michael Haboustak <mike-@cinci.rr.com> for Concept2, Inc - * Copyright (c) 2006-2007 Jiri Kosina * Copyright (c) 2007 Paul Walmsley * Copyright (c) 2008 Jiri Slaby + * Copyright (c) 2006-2008 Jiri Kosina */ /* @@ -23,6 +23,26 @@ #include "hid-ids.h" +#define VAIO_RDESC_CONSTANT 0x0001 + +struct sony_sc { + unsigned long quirks; +}; + +/* Sony Vaio VGX has wrongly mouse pointer declared as constant */ +static void sony_report_fixup(struct hid_device *hdev, __u8 *rdesc, + unsigned int rsize) +{ + struct sony_sc *sc = hid_get_drvdata(hdev); + + if ((sc->quirks & VAIO_RDESC_CONSTANT) && + rsize >= 56 && rdesc[54] == 0x81 && rdesc[55] == 0x07) { + dev_info(&hdev->dev, "Fixing up Sony Vaio VGX report " + "descriptor\n"); + rdesc[55] = 0x06; + } +} + /* * Sending HID_REQ_GET_REPORT changes the operation mode of the ps3 controller * to "operational". Without this, the ps3 controller will not report any @@ -56,6 +76,17 @@ static int sony_set_operational(struct hid_device *hdev) static int sony_probe(struct hid_device *hdev, const struct hid_device_id *id) { int ret; + unsigned long quirks = id->driver_data; + struct sony_sc *sc; + + sc = kzalloc(sizeof(*sc), GFP_KERNEL); + if (sc == NULL) { + dev_err(&hdev->dev, "can't alloc apple descriptor\n"); + return -ENOMEM; + } + + sc->quirks = quirks; + hid_set_drvdata(hdev, sc); ret = hid_parse(hdev); if (ret) { @@ -78,11 +109,20 @@ static int sony_probe(struct hid_device *hdev, const struct hid_device_id *id) err_stop: hid_hw_stop(hdev); err_free: + kfree(sc); return ret; } +static void sony_remove(struct hid_device *hdev) +{ + hid_hw_stop(hdev); + kfree(hid_get_drvdata(hdev)); +} + static const struct hid_device_id sony_devices[] = { { HID_USB_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_PS3_CONTROLLER) }, + { HID_USB_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_VAIO_VGX_MOUSE), + .driver_data = VAIO_RDESC_CONSTANT }, { } }; MODULE_DEVICE_TABLE(hid, sony_devices); @@ -91,6 +131,8 @@ static struct hid_driver sony_driver = { .name = "sony", .id_table = sony_devices, .probe = sony_probe, + .remove = sony_remove, + .report_fixup = sony_report_fixup, }; static int sony_init(void) diff --git a/drivers/hid/hidraw.c b/drivers/hid/hidraw.c index af3edb98df43..894d52e05bf9 100644 --- a/drivers/hid/hidraw.c +++ b/drivers/hid/hidraw.c @@ -264,6 +264,7 @@ static long hidraw_ioctl(struct file *file, unsigned int cmd, default: ret = -ENOTTY; } + unlock_kernel(); return ret; } @@ -403,7 +404,7 @@ out: return result; } -void __exit hidraw_exit(void) +void hidraw_exit(void) { dev_t dev_id = MKDEV(hidraw_major, 0); diff --git a/drivers/hid/usbhid/hid-core.c b/drivers/hid/usbhid/hid-core.c index 705a43cdeea4..42bdd83444c1 100644 --- a/drivers/hid/usbhid/hid-core.c +++ b/drivers/hid/usbhid/hid-core.c @@ -972,6 +972,9 @@ static int hid_probe(struct usb_interface *intf, const struct usb_device_id *id) hid->vendor = le16_to_cpu(dev->descriptor.idVendor); hid->product = le16_to_cpu(dev->descriptor.idProduct); hid->name[0] = 0; + if (intf->cur_altsetting->desc.bInterfaceProtocol == + USB_INTERFACE_PROTOCOL_MOUSE) + hid->type = HID_TYPE_USBMOUSE; if (dev->manufacturer) strlcpy(hid->name, dev->manufacturer, sizeof(hid->name)); diff --git a/drivers/hid/usbhid/hiddev.c b/drivers/hid/usbhid/hiddev.c index babd65dd46ad..3ac320785fc5 100644 --- a/drivers/hid/usbhid/hiddev.c +++ b/drivers/hid/usbhid/hiddev.c @@ -436,8 +436,7 @@ static noinline int hiddev_ioctl_usage(struct hiddev *hiddev, unsigned int cmd, if (copy_to_user(user_arg, uref, sizeof(*uref))) goto fault; - kfree(uref_multi); - return 0; + goto goodreturn; default: if (cmd != HIDIOCGUSAGE && diff --git a/drivers/hwmon/abituguru3.c b/drivers/hwmon/abituguru3.c index d9e7a49d6cbf..70bb854086df 100644 --- a/drivers/hwmon/abituguru3.c +++ b/drivers/hwmon/abituguru3.c @@ -178,7 +178,7 @@ static const struct abituguru3_motherboard_info abituguru3_motherboards[] = { { "+3.3V", 10, 0, 20, 1, 0 }, { "5VSB", 11, 0, 30, 1, 0 }, { "CPU", 24, 1, 1, 1, 0 }, - { "System ", 25, 1, 1, 1, 0 }, + { "System", 25, 1, 1, 1, 0 }, { "PWM", 26, 1, 1, 1, 0 }, { "CPU Fan", 32, 2, 60, 1, 0 }, { "NB Fan", 33, 2, 60, 1, 0 }, @@ -200,7 +200,7 @@ static const struct abituguru3_motherboard_info abituguru3_motherboards[] = { { "+3.3V", 10, 0, 20, 1, 0 }, { "5VSB", 11, 0, 30, 1, 0 }, { "CPU", 24, 1, 1, 1, 0 }, - { "System ", 25, 1, 1, 1, 0 }, + { "System", 25, 1, 1, 1, 0 }, { "PWM1", 26, 1, 1, 1, 0 }, { "PWM2", 27, 1, 1, 1, 0 }, { "PWM3", 28, 1, 1, 1, 0 }, @@ -229,7 +229,7 @@ static const struct abituguru3_motherboard_info abituguru3_motherboards[] = { { "+3.3V", 10, 0, 20, 1, 0 }, { "5VSB", 11, 0, 30, 1, 0 }, { "CPU", 24, 1, 1, 1, 0 }, - { "System ", 25, 1, 1, 1, 0 }, + { "System", 25, 1, 1, 1, 0 }, { "PWM", 26, 1, 1, 1, 0 }, { "CPU Fan", 32, 2, 60, 1, 0 }, { "NB Fan", 33, 2, 60, 1, 0 }, @@ -250,7 +250,7 @@ static const struct abituguru3_motherboard_info abituguru3_motherboards[] = { { "+3.3V", 10, 0, 20, 1, 0 }, { "5VSB", 11, 0, 30, 1, 0 }, { "CPU", 24, 1, 1, 1, 0 }, - { "System ", 25, 1, 1, 1, 0 }, + { "System", 25, 1, 1, 1, 0 }, { "PWM", 26, 1, 1, 1, 0 }, { "CPU Fan", 32, 2, 60, 1, 0 }, { "NB Fan", 33, 2, 60, 1, 0 }, @@ -342,7 +342,7 @@ static const struct abituguru3_motherboard_info abituguru3_motherboards[] = { { "+3.3V", 10, 0, 20, 1, 0 }, { "5VSB", 11, 0, 30, 1, 0 }, { "CPU", 24, 1, 1, 1, 0 }, - { "System ", 25, 1, 1, 1, 0 }, + { "System", 25, 1, 1, 1, 0 }, { "PWM1", 26, 1, 1, 1, 0 }, { "PWM2", 27, 1, 1, 1, 0 }, { "PWM3", 28, 1, 1, 1, 0 }, @@ -371,7 +371,7 @@ static const struct abituguru3_motherboard_info abituguru3_motherboards[] = { { "+3.3V", 10, 0, 20, 1, 0 }, { "5VSB", 11, 0, 30, 1, 0 }, { "CPU", 24, 1, 1, 1, 0 }, - { "System ", 25, 1, 1, 1, 0 }, + { "System", 25, 1, 1, 1, 0 }, { "PWM", 26, 1, 1, 1, 0 }, { "CPU Fan", 32, 2, 60, 1, 0 }, { "NB Fan", 33, 2, 60, 1, 0 }, @@ -402,7 +402,7 @@ static const struct abituguru3_motherboard_info abituguru3_motherboards[] = { { "AUX3 Fan", 36, 2, 60, 1, 0 }, { NULL, 0, 0, 0, 0, 0 } } }, - { 0x0016, NULL /* AW9D-MAX, need DMI string */, { + { 0x0016, "AW9D-MAX (Intel i975-ICH7)", { { "CPU Core", 0, 0, 10, 1, 0 }, { "DDR2", 1, 0, 20, 1, 0 }, { "DDR2 VTT", 2, 0, 10, 1, 0 }, @@ -416,7 +416,7 @@ static const struct abituguru3_motherboard_info abituguru3_motherboards[] = { { "+3.3V", 10, 0, 20, 1, 0 }, { "5VSB", 11, 0, 30, 1, 0 }, { "CPU", 24, 1, 1, 1, 0 }, - { "System ", 25, 1, 1, 1, 0 }, + { "System", 25, 1, 1, 1, 0 }, { "PWM1", 26, 1, 1, 1, 0 }, { "PWM2", 27, 1, 1, 1, 0 }, { "PWM3", 28, 1, 1, 1, 0 }, @@ -446,7 +446,7 @@ static const struct abituguru3_motherboard_info abituguru3_motherboards[] = { { "ATX +3.3V", 10, 0, 20, 1, 0 }, { "ATX 5VSB", 11, 0, 30, 1, 0 }, { "CPU", 24, 1, 1, 1, 0 }, - { "System ", 26, 1, 1, 1, 0 }, + { "System", 26, 1, 1, 1, 0 }, { "PWM", 27, 1, 1, 1, 0 }, { "CPU FAN", 32, 2, 60, 1, 0 }, { "SYS FAN", 34, 2, 60, 1, 0 }, @@ -469,7 +469,7 @@ static const struct abituguru3_motherboard_info abituguru3_motherboards[] = { { "+3.3V", 10, 0, 20, 1, 0 }, { "5VSB", 11, 0, 30, 1, 0 }, { "CPU", 24, 1, 1, 1, 0 }, - { "System ", 25, 1, 1, 1, 0 }, + { "System", 25, 1, 1, 1, 0 }, { "PWM Phase1", 26, 1, 1, 1, 0 }, { "PWM Phase2", 27, 1, 1, 1, 0 }, { "PWM Phase3", 28, 1, 1, 1, 0 }, @@ -487,7 +487,7 @@ static const struct abituguru3_motherboard_info abituguru3_motherboards[] = { { "DDR2", 13, 0, 20, 1, 0 }, { "DDR2 VTT", 14, 0, 10, 1, 0 }, { "CPU VTT", 3, 0, 20, 1, 0 }, - { "NB 1.2V ", 4, 0, 10, 1, 0 }, + { "NB 1.2V", 4, 0, 10, 1, 0 }, { "SB 1.5V", 6, 0, 10, 1, 0 }, { "HyperTransport", 5, 0, 10, 1, 0 }, { "ATX +12V (24-Pin)", 12, 0, 60, 1, 0 }, @@ -496,7 +496,7 @@ static const struct abituguru3_motherboard_info abituguru3_motherboards[] = { { "ATX +3.3V", 10, 0, 20, 1, 0 }, { "ATX 5VSB", 11, 0, 30, 1, 0 }, { "CPU", 24, 1, 1, 1, 0 }, - { "System ", 25, 1, 1, 1, 0 }, + { "System", 25, 1, 1, 1, 0 }, { "PWM Phase1", 26, 1, 1, 1, 0 }, { "PWM Phase2", 27, 1, 1, 1, 0 }, { "PWM Phase3", 28, 1, 1, 1, 0 }, @@ -523,8 +523,8 @@ static const struct abituguru3_motherboard_info abituguru3_motherboards[] = { { "+3.3V", 10, 0, 20, 1, 0 }, { "5VSB", 11, 0, 30, 1, 0 }, { "CPU", 24, 1, 1, 1, 0 }, - { "System ", 25, 1, 1, 1, 0 }, - { "PWM ", 26, 1, 1, 1, 0 }, + { "System", 25, 1, 1, 1, 0 }, + { "PWM", 26, 1, 1, 1, 0 }, { "PWM Phase2", 27, 1, 1, 1, 0 }, { "PWM Phase3", 28, 1, 1, 1, 0 }, { "PWM Phase4", 29, 1, 1, 1, 0 }, @@ -947,7 +947,7 @@ static int __devinit abituguru3_probe(struct platform_device *pdev) if (!abituguru3_motherboards[i].dmi_name) { printk(KERN_WARNING ABIT_UGURU3_NAME ": this motherboard was " "not detected using DMI. Please send the output of " - "\"dmidecode\" to the abituguru3 maintainer" + "\"dmidecode\" to the abituguru3 maintainer " "(see MAINTAINERS)\n"); } #endif diff --git a/drivers/hwmon/adt7473.c b/drivers/hwmon/adt7473.c index 3a0b63136479..b9a8ea30c99c 100644 --- a/drivers/hwmon/adt7473.c +++ b/drivers/hwmon/adt7473.c @@ -319,35 +319,24 @@ out: } /* - * On this chip, voltages are given as a count of steps between a minimum - * and maximum voltage, not a direct voltage. + * Conversions */ -static const int volt_convert_table[][2] = { - {2997, 3}, - {4395, 4}, + +/* IN are scaled acording to built-in resistors */ +static const int adt7473_scaling[] = { /* .001 Volts */ + 2250, 3300 }; +#define SCALE(val, from, to) (((val) * (to) + ((from) / 2)) / (from)) static int decode_volt(int volt_index, u8 raw) { - int cmax = volt_convert_table[volt_index][0]; - int cmin = volt_convert_table[volt_index][1]; - return ((raw * (cmax - cmin)) / 255) + cmin; + return SCALE(raw, 192, adt7473_scaling[volt_index]); } static u8 encode_volt(int volt_index, int cooked) { - int cmax = volt_convert_table[volt_index][0]; - int cmin = volt_convert_table[volt_index][1]; - u8 x; - - if (cooked > cmax) - cooked = cmax; - else if (cooked < cmin) - cooked = cmin; - - x = ((cooked - cmin) * 255) / (cmax - cmin); - - return x; + int raw = SCALE(cooked, adt7473_scaling[volt_index], 192); + return SENSORS_LIMIT(raw, 0, 255); } static ssize_t show_volt_min(struct device *dev, diff --git a/drivers/hwmon/hwmon-vid.c b/drivers/hwmon/hwmon-vid.c index c54eff92be4a..bfc296145bba 100644 --- a/drivers/hwmon/hwmon-vid.c +++ b/drivers/hwmon/hwmon-vid.c @@ -180,6 +180,7 @@ static struct vrm_model vrm_models[] = { {X86_VENDOR_AMD, 0x6, ANY, ANY, 90}, /* Athlon Duron etc */ {X86_VENDOR_AMD, 0xF, 0x3F, ANY, 24}, /* Athlon 64, Opteron */ {X86_VENDOR_AMD, 0xF, ANY, ANY, 25}, /* NPT family 0Fh */ + {X86_VENDOR_AMD, 0x10, ANY, ANY, 25}, /* NPT family 10h */ {X86_VENDOR_INTEL, 0x6, 0x9, ANY, 13}, /* Pentium M (130 nm) */ {X86_VENDOR_INTEL, 0x6, 0xB, ANY, 85}, /* Tualatin */ {X86_VENDOR_INTEL, 0x6, 0xD, ANY, 13}, /* Pentium M (90 nm) */ diff --git a/drivers/hwmon/lm90.c b/drivers/hwmon/lm90.c index 3edeebc0b835..96a701866726 100644 --- a/drivers/hwmon/lm90.c +++ b/drivers/hwmon/lm90.c @@ -12,9 +12,9 @@ * made by National Semiconductor. Both have an increased remote * temperature measurement accuracy (1 degree), and the LM99 * additionally shifts remote temperatures (measured and limits) by 16 - * degrees, which allows for higher temperatures measurement. The - * driver doesn't handle it since it can be done easily in user-space. + * degrees, which allows for higher temperatures measurement. * Note that there is no way to differentiate between both chips. + * When device is auto-detected, the driver will assume an LM99. * * This driver also supports the LM86, another sensor chip made by * National Semiconductor. It is exactly similar to the LM90 except it @@ -169,8 +169,8 @@ static const struct i2c_device_id lm90_id[] = { { "adt7461", adt7461 }, { "lm90", lm90 }, { "lm86", lm86 }, - { "lm89", lm99 }, - { "lm99", lm99 }, /* Missing temperature offset */ + { "lm89", lm86 }, + { "lm99", lm99 }, { "max6646", max6646 }, { "max6647", max6646 }, { "max6649", max6646 }, @@ -366,6 +366,10 @@ static ssize_t show_temp8(struct device *dev, struct device_attribute *devattr, else temp = temp_from_s8(data->temp8[attr->index]); + /* +16 degrees offset for temp2 for the LM99 */ + if (data->kind == lm99 && attr->index == 3) + temp += 16000; + return sprintf(buf, "%d\n", temp); } @@ -385,6 +389,10 @@ static ssize_t set_temp8(struct device *dev, struct device_attribute *devattr, long val = simple_strtol(buf, NULL, 10); int nr = attr->index; + /* +16 degrees offset for temp2 for the LM99 */ + if (data->kind == lm99 && attr->index == 3) + val -= 16000; + mutex_lock(&data->update_lock); if (data->kind == adt7461) data->temp8[nr] = temp_to_u8_adt7461(data, val); @@ -411,6 +419,10 @@ static ssize_t show_temp11(struct device *dev, struct device_attribute *devattr, else temp = temp_from_s16(data->temp11[attr->index]); + /* +16 degrees offset for temp2 for the LM99 */ + if (data->kind == lm99 && attr->index <= 2) + temp += 16000; + return sprintf(buf, "%d\n", temp); } @@ -432,6 +444,10 @@ static ssize_t set_temp11(struct device *dev, struct device_attribute *devattr, long val = simple_strtol(buf, NULL, 10); int nr = attr->index; + /* +16 degrees offset for temp2 for the LM99 */ + if (data->kind == lm99 && attr->index <= 2) + val -= 16000; + mutex_lock(&data->update_lock); if (data->kind == adt7461) data->temp11[nr] = temp_to_u16_adt7461(data, val); @@ -461,9 +477,15 @@ static ssize_t show_temphyst(struct device *dev, struct device_attribute *devatt if (data->kind == adt7461) temp = temp_from_u8_adt7461(data, data->temp8[attr->index]); + else if (data->kind == max6646) + temp = temp_from_u8(data->temp8[attr->index]); else temp = temp_from_s8(data->temp8[attr->index]); + /* +16 degrees offset for temp2 for the LM99 */ + if (data->kind == lm99 && attr->index == 3) + temp += 16000; + return sprintf(buf, "%d\n", temp - temp_from_s8(data->temp_hyst)); } @@ -473,12 +495,19 @@ static ssize_t set_temphyst(struct device *dev, struct device_attribute *dummy, struct i2c_client *client = to_i2c_client(dev); struct lm90_data *data = i2c_get_clientdata(client); long val = simple_strtol(buf, NULL, 10); - long hyst; + int temp; mutex_lock(&data->update_lock); - hyst = temp_from_s8(data->temp8[2]) - val; + if (data->kind == adt7461) + temp = temp_from_u8_adt7461(data, data->temp8[2]); + else if (data->kind == max6646) + temp = temp_from_u8(data->temp8[2]); + else + temp = temp_from_s8(data->temp8[2]); + + data->temp_hyst = hyst_to_reg(temp - val); i2c_smbus_write_byte_data(client, LM90_REG_W_TCRIT_HYST, - hyst_to_reg(hyst)); + data->temp_hyst); mutex_unlock(&data->update_lock); return count; } @@ -682,6 +711,15 @@ static int lm90_detect(struct i2c_client *new_client, int kind, } else if ((chip_id & 0xF0) == 0x30) { /* LM89/LM99 */ kind = lm99; + dev_info(&adapter->dev, + "Assuming LM99 chip at " + "0x%02x\n", address); + dev_info(&adapter->dev, + "If it is an LM89, pass " + "force_lm86=%d,0x%02x when " + "loading the lm90 driver\n", + i2c_adapter_id(adapter), + address); } else if (address == 0x4C && (chip_id & 0xF0) == 0x10) { /* LM86 */ diff --git a/drivers/hwmon/w83781d.c b/drivers/hwmon/w83781d.c index d4d1b859d4f1..fc12bd412e3a 100644 --- a/drivers/hwmon/w83781d.c +++ b/drivers/hwmon/w83781d.c @@ -1968,7 +1968,7 @@ exit: return res; } -static void __exit +static void w83781d_isa_unregister(void) { if (pdev) { @@ -2017,7 +2017,7 @@ w83781d_isa_register(void) return 0; } -static void __exit +static void w83781d_isa_unregister(void) { } diff --git a/drivers/ide/icside.c b/drivers/ide/icside.c index 76bdc9a27f6f..2d848010499d 100644 --- a/drivers/ide/icside.c +++ b/drivers/ide/icside.c @@ -690,9 +690,9 @@ static int __init icside_init(void) return ecard_register_driver(&icside_driver); } -static void __exit icside_exit(void); +static void __exit icside_exit(void) { - ecard_unregister_driver(&icside_driver); + ecard_remove_driver(&icside_driver); } MODULE_AUTHOR("Russell King <rmk@arm.linux.org.uk>"); diff --git a/drivers/ide/rapide.c b/drivers/ide/rapide.c index 78d27d9ae430..d5003ca69801 100644 --- a/drivers/ide/rapide.c +++ b/drivers/ide/rapide.c @@ -11,7 +11,7 @@ #include <asm/ecard.h> -static struct const ide_port_info rapide_port_info = { +static const struct ide_port_info rapide_port_info = { .host_flags = IDE_HFLAG_MMIO | IDE_HFLAG_NO_DMA, }; @@ -97,7 +97,7 @@ static int __init rapide_init(void) static void __exit rapide_exit(void) { - ecard_unregister_driver(&rapide_driver); + ecard_remove_driver(&rapide_driver); } MODULE_LICENSE("GPL"); diff --git a/drivers/idle/Kconfig b/drivers/idle/Kconfig index f5b26dd579e4..108264de0ac9 100644 --- a/drivers/idle/Kconfig +++ b/drivers/idle/Kconfig @@ -5,12 +5,13 @@ config I7300_IDLE_IOAT_CHANNEL bool config I7300_IDLE - tristate "Intel chipset idle power saving driver" + tristate "Intel chipset idle memory power saving driver" select I7300_IDLE_IOAT_CHANNEL - depends on X86_64 + depends on X86_64 && EXPERIMENTAL help - Enable idle power savings with certain Intel server chipsets. - The chipset must have I/O AT support, such as the Intel 7300. - The power savings depends on the type and quantity of DRAM devices. + Enable memory power savings when idle with certain Intel server + chipsets. The chipset must have I/O AT support, such as the + Intel 7300. The power savings depends on the type and quantity of + DRAM devices. endmenu diff --git a/drivers/idle/i7300_idle.c b/drivers/idle/i7300_idle.c index 59d1bbc3cd3c..fb176f6ef9f8 100644 --- a/drivers/idle/i7300_idle.c +++ b/drivers/idle/i7300_idle.c @@ -25,6 +25,7 @@ #include <linux/delay.h> #include <linux/debugfs.h> #include <linux/stop_machine.h> +#include <linux/i7300_idle.h> #include <asm/idle.h> @@ -34,6 +35,8 @@ #define I7300_IDLE_DRIVER_VERSION "1.55" #define I7300_PRINT "i7300_idle:" +#define MAX_STOP_RETRIES 10 + static int debug; module_param_named(debug, debug, uint, 0644); MODULE_PARM_DESC(debug, "Enable debug printks in this driver"); @@ -46,12 +49,12 @@ MODULE_PARM_DESC(debug, "Enable debug printks in this driver"); * 0 = No throttling * 1 = Throttle when > 4 activations per eval window (Maximum throttling) * 2 = Throttle when > 8 activations - * 168 = Throttle when > 168 activations (Minimum throttling) + * 168 = Throttle when > 672 activations (Minimum throttling) */ -#define MAX_THRTLWLIMIT 168 -static uint i7300_idle_thrtlowlm = 1; -module_param_named(thrtlwlimit, i7300_idle_thrtlowlm, uint, 0644); -MODULE_PARM_DESC(thrtlwlimit, +#define MAX_THROTTLE_LOW_LIMIT 168 +static uint throttle_low_limit = 1; +module_param_named(throttle_low_limit, throttle_low_limit, uint, 0644); +MODULE_PARM_DESC(throttle_low_limit, "Value for THRTLOWLM activation field " "(0 = disable throttle, 1 = Max throttle, 168 = Min throttle)"); @@ -110,9 +113,9 @@ static int i7300_idle_ioat_start(void) static void i7300_idle_ioat_stop(void) { int i; - u8 sts; + u64 sts; - for (i = 0; i < 5; i++) { + for (i = 0; i < MAX_STOP_RETRIES; i++) { writeb(IOAT_CHANCMD_RESET, ioat_chanbase + IOAT1_CHANCMD_OFFSET); @@ -126,9 +129,10 @@ static void i7300_idle_ioat_stop(void) } - if (i == 5) - dprintk("failed to suspend+reset I/O AT after 5 retries\n"); - + if (i == MAX_STOP_RETRIES) { + dprintk("failed to stop I/O AT after %d retries\n", + MAX_STOP_RETRIES); + } } /* Test I/O AT by copying 1024 byte from 2k to 1k */ @@ -275,7 +279,7 @@ static void __exit i7300_idle_ioat_exit(void) i7300_idle_ioat_stop(); /* Wait for a while for the channel to halt before releasing */ - for (i = 0; i < 10; i++) { + for (i = 0; i < MAX_STOP_RETRIES; i++) { writeb(IOAT_CHANCMD_RESET, ioat_chanbase + IOAT1_CHANCMD_OFFSET); @@ -389,9 +393,9 @@ static void i7300_idle_start(void) new_ctl = i7300_idle_thrtctl_saved & ~DIMM_THRTCTL_THRMHUNT; pci_write_config_byte(fbd_dev, DIMM_THRTCTL, new_ctl); - limit = i7300_idle_thrtlowlm; - if (unlikely(limit > MAX_THRTLWLIMIT)) - limit = MAX_THRTLWLIMIT; + limit = throttle_low_limit; + if (unlikely(limit > MAX_THROTTLE_LOW_LIMIT)) + limit = MAX_THROTTLE_LOW_LIMIT; pci_write_config_byte(fbd_dev, DIMM_THRTLOW, limit); @@ -440,7 +444,7 @@ static int i7300_idle_notifier(struct notifier_block *nb, unsigned long val, static ktime_t idle_begin_time; static int time_init = 1; - if (!i7300_idle_thrtlowlm) + if (!throttle_low_limit) return 0; if (unlikely(time_init)) { @@ -505,77 +509,8 @@ static struct notifier_block i7300_idle_nb = { .notifier_call = i7300_idle_notifier, }; -/* - * I/O AT controls (PCI bus 0 device 8 function 0) - * DIMM controls (PCI bus 0 device 16 function 1) - */ -#define IOAT_BUS 0 -#define IOAT_DEVFN PCI_DEVFN(8, 0) -#define MEMCTL_BUS 0 -#define MEMCTL_DEVFN PCI_DEVFN(16, 1) - -struct fbd_ioat { - unsigned int vendor; - unsigned int ioat_dev; -}; - -/* - * The i5000 chip-set has the same hooks as the i7300 - * but support is disabled by default because this driver - * has not been validated on that platform. - */ -#define SUPPORT_I5000 0 - -static const struct fbd_ioat fbd_ioat_list[] = { - {PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_IOAT_CNB}, -#if SUPPORT_I5000 - {PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_IOAT}, -#endif - {0, 0} -}; - -/* table of devices that work with this driver */ -static const struct pci_device_id pci_tbl[] = { - { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_FBD_CNB) }, -#if SUPPORT_I5000 - { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_5000_ERR) }, -#endif - { } /* Terminating entry */ -}; - MODULE_DEVICE_TABLE(pci, pci_tbl); -/* Check for known platforms with I/O-AT */ -static int __init i7300_idle_platform_probe(void) -{ - int i; - - fbd_dev = pci_get_bus_and_slot(MEMCTL_BUS, MEMCTL_DEVFN); - if (!fbd_dev) - return -ENODEV; - - for (i = 0; pci_tbl[i].vendor != 0; i++) { - if (fbd_dev->vendor == pci_tbl[i].vendor && - fbd_dev->device == pci_tbl[i].device) { - break; - } - } - if (pci_tbl[i].vendor == 0) - return -ENODEV; - - ioat_dev = pci_get_bus_and_slot(IOAT_BUS, IOAT_DEVFN); - if (!ioat_dev) - return -ENODEV; - - for (i = 0; fbd_ioat_list[i].vendor != 0; i++) { - if (ioat_dev->vendor == fbd_ioat_list[i].vendor && - ioat_dev->device == fbd_ioat_list[i].ioat_dev) { - return 0; - } - } - return -ENODEV; -} - int stats_open_generic(struct inode *inode, struct file *fp) { fp->private_data = inode->i_private; @@ -617,7 +552,7 @@ static int __init i7300_idle_init(void) cpus_clear(idle_cpumask); total_us = 0; - if (i7300_idle_platform_probe()) + if (i7300_idle_platform_probe(&fbd_dev, &ioat_dev)) return -ENODEV; if (i7300_idle_thrt_save()) diff --git a/drivers/input/misc/sgi_btns.c b/drivers/input/misc/sgi_btns.c index ce238f59b3c8..be3a15f5b25d 100644 --- a/drivers/input/misc/sgi_btns.c +++ b/drivers/input/misc/sgi_btns.c @@ -174,5 +174,6 @@ static void __exit sgi_buttons_exit(void) platform_driver_unregister(&sgi_buttons_driver); } +MODULE_LICENSE("GPL"); module_init(sgi_buttons_init); module_exit(sgi_buttons_exit); diff --git a/drivers/input/mouse/Kconfig b/drivers/input/mouse/Kconfig index f488b6852baf..4e9934259775 100644 --- a/drivers/input/mouse/Kconfig +++ b/drivers/input/mouse/Kconfig @@ -25,8 +25,8 @@ config MOUSE_PS2 mice with wheels and extra buttons, Microsoft, Logitech or Genius compatible. - Synaptics TouchPad users might be interested in a specialized - XFree86 driver at: + Synaptics, ALPS or Elantech TouchPad users might be interested + in a specialized Xorg/XFree86 driver at: <http://w1.894.telia.com/~u89404340/touchpad/index.html> and a new version of GPM at: <http://www.geocities.com/dt_or/gpm/gpm.html> @@ -87,6 +87,27 @@ config MOUSE_PS2_TRACKPOINT If unsure, say Y. +config MOUSE_PS2_ELANTECH + bool "Elantech PS/2 protocol extension" + depends on MOUSE_PS2 + help + Say Y here if you have an Elantech PS/2 touchpad connected + to your system. + + Note that if you enable this driver you will need an updated + X.org Synaptics driver that does not require ABS_PRESSURE + reports from the touchpad (i.e. post 1.5.0 version). You can + grab a patch for the driver here: + + http://userweb.kernel.org/~dtor/synaptics-no-abspressure.patch + + If unsure, say N. + + This driver exposes some configuration registers via sysfs + entries. For further information, + see <file:Documentation/input/elantech.txt>. + + config MOUSE_PS2_TOUCHKIT bool "eGalax TouchKit PS/2 protocol extension" depends on MOUSE_PS2 diff --git a/drivers/input/mouse/Makefile b/drivers/input/mouse/Makefile index 8e6e69097801..96f1dd8037f8 100644 --- a/drivers/input/mouse/Makefile +++ b/drivers/input/mouse/Makefile @@ -21,6 +21,7 @@ obj-$(CONFIG_MOUSE_GPIO) += gpio_mouse.o psmouse-objs := psmouse-base.o synaptics.o psmouse-$(CONFIG_MOUSE_PS2_ALPS) += alps.o +psmouse-$(CONFIG_MOUSE_PS2_ELANTECH) += elantech.o psmouse-$(CONFIG_MOUSE_PS2_OLPC) += hgpk.o psmouse-$(CONFIG_MOUSE_PS2_LOGIPS2PP) += logips2pp.o psmouse-$(CONFIG_MOUSE_PS2_LIFEBOOK) += lifebook.o diff --git a/drivers/input/mouse/elantech.c b/drivers/input/mouse/elantech.c new file mode 100644 index 000000000000..b9a25d57bc5e --- /dev/null +++ b/drivers/input/mouse/elantech.c @@ -0,0 +1,674 @@ +/* + * Elantech Touchpad driver (v5) + * + * Copyright (C) 2007-2008 Arjan Opmeer <arjan@opmeer.net> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + * Trademarks are the property of their respective owners. + */ + +#include <linux/delay.h> +#include <linux/module.h> +#include <linux/input.h> +#include <linux/serio.h> +#include <linux/libps2.h> +#include "psmouse.h" +#include "elantech.h" + +#define elantech_debug(format, arg...) \ + do { \ + if (etd->debug) \ + printk(KERN_DEBUG format, ##arg); \ + } while (0) + +/* + * Send a Synaptics style sliced query command + */ +static int synaptics_send_cmd(struct psmouse *psmouse, unsigned char c, + unsigned char *param) +{ + if (psmouse_sliced_command(psmouse, c) || + ps2_command(&psmouse->ps2dev, param, PSMOUSE_CMD_GETINFO)) { + pr_err("elantech.c: synaptics_send_cmd query 0x%02x failed.\n", c); + return -1; + } + + return 0; +} + +/* + * A retrying version of ps2_command + */ +static int elantech_ps2_command(struct psmouse *psmouse, + unsigned char *param, int command) +{ + struct ps2dev *ps2dev = &psmouse->ps2dev; + struct elantech_data *etd = psmouse->private; + int rc; + int tries = ETP_PS2_COMMAND_TRIES; + + do { + rc = ps2_command(ps2dev, param, command); + if (rc == 0) + break; + tries--; + elantech_debug("elantech.c: retrying ps2 command 0x%02x (%d).\n", + command, tries); + msleep(ETP_PS2_COMMAND_DELAY); + } while (tries > 0); + + if (rc) + pr_err("elantech.c: ps2 command 0x%02x failed.\n", command); + + return rc; +} + +/* + * Send an Elantech style special command to read a value from a register + */ +static int elantech_read_reg(struct psmouse *psmouse, unsigned char reg, + unsigned char *val) +{ + struct elantech_data *etd = psmouse->private; + unsigned char param[3]; + int rc = 0; + + if (reg < 0x10 || reg > 0x26) + return -1; + + if (reg > 0x11 && reg < 0x20) + return -1; + + switch (etd->hw_version) { + case 1: + if (psmouse_sliced_command(psmouse, ETP_REGISTER_READ) || + psmouse_sliced_command(psmouse, reg) || + ps2_command(&psmouse->ps2dev, param, PSMOUSE_CMD_GETINFO)) { + rc = -1; + } + break; + + case 2: + if (elantech_ps2_command(psmouse, NULL, ETP_PS2_CUSTOM_COMMAND) || + elantech_ps2_command(psmouse, NULL, ETP_REGISTER_READ) || + elantech_ps2_command(psmouse, NULL, ETP_PS2_CUSTOM_COMMAND) || + elantech_ps2_command(psmouse, NULL, reg) || + elantech_ps2_command(psmouse, param, PSMOUSE_CMD_GETINFO)) { + rc = -1; + } + break; + } + + if (rc) + pr_err("elantech.c: failed to read register 0x%02x.\n", reg); + else + *val = param[0]; + + return rc; +} + +/* + * Send an Elantech style special command to write a register with a value + */ +static int elantech_write_reg(struct psmouse *psmouse, unsigned char reg, + unsigned char val) +{ + struct elantech_data *etd = psmouse->private; + int rc = 0; + + if (reg < 0x10 || reg > 0x26) + return -1; + + if (reg > 0x11 && reg < 0x20) + return -1; + + switch (etd->hw_version) { + case 1: + if (psmouse_sliced_command(psmouse, ETP_REGISTER_WRITE) || + psmouse_sliced_command(psmouse, reg) || + psmouse_sliced_command(psmouse, val) || + ps2_command(&psmouse->ps2dev, NULL, PSMOUSE_CMD_SETSCALE11)) { + rc = -1; + } + break; + + case 2: + if (elantech_ps2_command(psmouse, NULL, ETP_PS2_CUSTOM_COMMAND) || + elantech_ps2_command(psmouse, NULL, ETP_REGISTER_WRITE) || + elantech_ps2_command(psmouse, NULL, ETP_PS2_CUSTOM_COMMAND) || + elantech_ps2_command(psmouse, NULL, reg) || + elantech_ps2_command(psmouse, NULL, ETP_PS2_CUSTOM_COMMAND) || + elantech_ps2_command(psmouse, NULL, val) || + elantech_ps2_command(psmouse, NULL, PSMOUSE_CMD_SETSCALE11)) { + rc = -1; + } + break; + } + + if (rc) + pr_err("elantech.c: failed to write register 0x%02x with value 0x%02x.\n", + reg, val); + + return rc; +} + +/* + * Dump a complete mouse movement packet to the syslog + */ +static void elantech_packet_dump(unsigned char *packet, int size) +{ + int i; + + printk(KERN_DEBUG "elantech.c: PS/2 packet ["); + for (i = 0; i < size; i++) + printk("%s0x%02x ", (i) ? ", " : " ", packet[i]); + printk("]\n"); +} + +/* + * Interpret complete data packets and report absolute mode input events for + * hardware version 1. (4 byte packets) + */ +static void elantech_report_absolute_v1(struct psmouse *psmouse) +{ + struct input_dev *dev = psmouse->dev; + struct elantech_data *etd = psmouse->private; + unsigned char *packet = psmouse->packet; + int fingers; + + if (etd->fw_version_maj == 0x01) { + /* byte 0: D U p1 p2 1 p3 R L + byte 1: f 0 th tw x9 x8 y9 y8 */ + fingers = ((packet[1] & 0x80) >> 7) + + ((packet[1] & 0x30) >> 4); + } else { + /* byte 0: n1 n0 p2 p1 1 p3 R L + byte 1: 0 0 0 0 x9 x8 y9 y8 */ + fingers = (packet[0] & 0xc0) >> 6; + } + + input_report_key(dev, BTN_TOUCH, fingers != 0); + + /* byte 2: x7 x6 x5 x4 x3 x2 x1 x0 + byte 3: y7 y6 y5 y4 y3 y2 y1 y0 */ + if (fingers) { + input_report_abs(dev, ABS_X, + ((packet[1] & 0x0c) << 6) | packet[2]); + input_report_abs(dev, ABS_Y, ETP_YMAX_V1 - + (((packet[1] & 0x03) << 8) | packet[3])); + } + + input_report_key(dev, BTN_TOOL_FINGER, fingers == 1); + input_report_key(dev, BTN_TOOL_DOUBLETAP, fingers == 2); + input_report_key(dev, BTN_TOOL_TRIPLETAP, fingers == 3); + input_report_key(dev, BTN_LEFT, packet[0] & 0x01); + input_report_key(dev, BTN_RIGHT, packet[0] & 0x02); + + if ((etd->fw_version_maj == 0x01) && + (etd->capabilities & ETP_CAP_HAS_ROCKER)) { + /* rocker up */ + input_report_key(dev, BTN_FORWARD, packet[0] & 0x40); + /* rocker down */ + input_report_key(dev, BTN_BACK, packet[0] & 0x80); + } + + input_sync(dev); +} + +/* + * Interpret complete data packets and report absolute mode input events for + * hardware version 2. (6 byte packets) + */ +static void elantech_report_absolute_v2(struct psmouse *psmouse) +{ + struct input_dev *dev = psmouse->dev; + unsigned char *packet = psmouse->packet; + int fingers, x1, y1, x2, y2; + + /* byte 0: n1 n0 . . . . R L */ + fingers = (packet[0] & 0xc0) >> 6; + input_report_key(dev, BTN_TOUCH, fingers != 0); + + switch (fingers) { + case 1: + /* byte 1: x15 x14 x13 x12 x11 x10 x9 x8 + byte 2: x7 x6 x5 x4 x4 x2 x1 x0 */ + input_report_abs(dev, ABS_X, (packet[1] << 8) | packet[2]); + /* byte 4: y15 y14 y13 y12 y11 y10 y8 y8 + byte 5: y7 y6 y5 y4 y3 y2 y1 y0 */ + input_report_abs(dev, ABS_Y, ETP_YMAX_V2 - + ((packet[4] << 8) | packet[5])); + break; + + case 2: + /* The coordinate of each finger is reported separately with + a lower resolution for two finger touches */ + /* byte 0: . . ay8 ax8 . . . . + byte 1: ax7 ax6 ax5 ax4 ax3 ax2 ax1 ax0 */ + x1 = ((packet[0] & 0x10) << 4) | packet[1]; + /* byte 2: ay7 ay6 ay5 ay4 ay3 ay2 ay1 ay0 */ + y1 = ETP_2FT_YMAX - (((packet[0] & 0x20) << 3) | packet[2]); + /* byte 3: . . by8 bx8 . . . . + byte 4: bx7 bx6 bx5 bx4 bx3 bx2 bx1 bx0 */ + x2 = ((packet[3] & 0x10) << 4) | packet[4]; + /* byte 5: by7 by8 by5 by4 by3 by2 by1 by0 */ + y2 = ETP_2FT_YMAX - (((packet[3] & 0x20) << 3) | packet[5]); + /* For compatibility with the X Synaptics driver scale up one + coordinate and report as ordinary mouse movent */ + input_report_abs(dev, ABS_X, x1 << 2); + input_report_abs(dev, ABS_Y, y1 << 2); + /* For compatibility with the proprietary X Elantech driver + report both coordinates as hat coordinates */ + input_report_abs(dev, ABS_HAT0X, x1); + input_report_abs(dev, ABS_HAT0Y, y1); + input_report_abs(dev, ABS_HAT1X, x2); + input_report_abs(dev, ABS_HAT1Y, y2); + break; + } + + input_report_key(dev, BTN_TOOL_FINGER, fingers == 1); + input_report_key(dev, BTN_TOOL_DOUBLETAP, fingers == 2); + input_report_key(dev, BTN_TOOL_TRIPLETAP, fingers == 3); + input_report_key(dev, BTN_LEFT, packet[0] & 0x01); + input_report_key(dev, BTN_RIGHT, packet[0] & 0x02); + + input_sync(dev); +} + +static int elantech_check_parity_v1(struct psmouse *psmouse) +{ + struct elantech_data *etd = psmouse->private; + unsigned char *packet = psmouse->packet; + unsigned char p1, p2, p3; + + /* Parity bits are placed differently */ + if (etd->fw_version_maj == 0x01) { + /* byte 0: D U p1 p2 1 p3 R L */ + p1 = (packet[0] & 0x20) >> 5; + p2 = (packet[0] & 0x10) >> 4; + } else { + /* byte 0: n1 n0 p2 p1 1 p3 R L */ + p1 = (packet[0] & 0x10) >> 4; + p2 = (packet[0] & 0x20) >> 5; + } + + p3 = (packet[0] & 0x04) >> 2; + + return etd->parity[packet[1]] == p1 && + etd->parity[packet[2]] == p2 && + etd->parity[packet[3]] == p3; +} + +/* + * Process byte stream from mouse and handle complete packets + */ +static psmouse_ret_t elantech_process_byte(struct psmouse *psmouse) +{ + struct elantech_data *etd = psmouse->private; + + if (psmouse->pktcnt < psmouse->pktsize) + return PSMOUSE_GOOD_DATA; + + if (etd->debug > 1) + elantech_packet_dump(psmouse->packet, psmouse->pktsize); + + switch (etd->hw_version) { + case 1: + if (etd->paritycheck && !elantech_check_parity_v1(psmouse)) + return PSMOUSE_BAD_DATA; + + elantech_report_absolute_v1(psmouse); + break; + + case 2: + /* We don't know how to check parity in protocol v2 */ + elantech_report_absolute_v2(psmouse); + break; + } + + return PSMOUSE_FULL_PACKET; +} + +/* + * Put the touchpad into absolute mode + */ +static int elantech_set_absolute_mode(struct psmouse *psmouse) +{ + struct elantech_data *etd = psmouse->private; + unsigned char val; + int tries = ETP_READ_BACK_TRIES; + int rc = 0; + + switch (etd->hw_version) { + case 1: + etd->reg_10 = 0x16; + etd->reg_11 = 0x8f; + if (elantech_write_reg(psmouse, 0x10, etd->reg_10) || + elantech_write_reg(psmouse, 0x11, etd->reg_11)) { + rc = -1; + } + break; + + case 2: + /* Windows driver values */ + etd->reg_10 = 0x54; + etd->reg_11 = 0x88; /* 0x8a */ + etd->reg_21 = 0x60; /* 0x00 */ + if (elantech_write_reg(psmouse, 0x10, etd->reg_10) || + elantech_write_reg(psmouse, 0x11, etd->reg_11) || + elantech_write_reg(psmouse, 0x21, etd->reg_21)) { + rc = -1; + break; + } + /* + * Read back reg 0x10. The touchpad is probably initalising + * and not ready until we read back the value we just wrote. + */ + do { + rc = elantech_read_reg(psmouse, 0x10, &val); + if (rc == 0) + break; + tries--; + elantech_debug("elantech.c: retrying read (%d).\n", + tries); + msleep(ETP_READ_BACK_DELAY); + } while (tries > 0); + if (rc) + pr_err("elantech.c: failed to read back register 0x10.\n"); + break; + } + + if (rc) + pr_err("elantech.c: failed to initialise registers.\n"); + + return rc; +} + +/* + * Set the appropriate event bits for the input subsystem + */ +static void elantech_set_input_params(struct psmouse *psmouse) +{ + struct input_dev *dev = psmouse->dev; + struct elantech_data *etd = psmouse->private; + + __set_bit(EV_KEY, dev->evbit); + __set_bit(EV_ABS, dev->evbit); + + __set_bit(BTN_LEFT, dev->keybit); + __set_bit(BTN_RIGHT, dev->keybit); + + __set_bit(BTN_TOUCH, dev->keybit); + __set_bit(BTN_TOOL_FINGER, dev->keybit); + __set_bit(BTN_TOOL_DOUBLETAP, dev->keybit); + __set_bit(BTN_TOOL_TRIPLETAP, dev->keybit); + + switch (etd->hw_version) { + case 1: + /* Rocker button */ + if ((etd->fw_version_maj == 0x01) && + (etd->capabilities & ETP_CAP_HAS_ROCKER)) { + __set_bit(BTN_FORWARD, dev->keybit); + __set_bit(BTN_BACK, dev->keybit); + } + input_set_abs_params(dev, ABS_X, ETP_XMIN_V1, ETP_XMAX_V1, 0, 0); + input_set_abs_params(dev, ABS_Y, ETP_YMIN_V1, ETP_YMAX_V1, 0, 0); + break; + + case 2: + input_set_abs_params(dev, ABS_X, ETP_XMIN_V2, ETP_XMAX_V2, 0, 0); + input_set_abs_params(dev, ABS_Y, ETP_YMIN_V2, ETP_YMAX_V2, 0, 0); + input_set_abs_params(dev, ABS_HAT0X, ETP_2FT_XMIN, ETP_2FT_XMAX, 0, 0); + input_set_abs_params(dev, ABS_HAT0Y, ETP_2FT_YMIN, ETP_2FT_YMAX, 0, 0); + input_set_abs_params(dev, ABS_HAT1X, ETP_2FT_XMIN, ETP_2FT_XMAX, 0, 0); + input_set_abs_params(dev, ABS_HAT1Y, ETP_2FT_YMIN, ETP_2FT_YMAX, 0, 0); + break; + } +} + +struct elantech_attr_data { + size_t field_offset; + unsigned char reg; +}; + +/* + * Display a register value by reading a sysfs entry + */ +static ssize_t elantech_show_int_attr(struct psmouse *psmouse, void *data, + char *buf) +{ + struct elantech_data *etd = psmouse->private; + struct elantech_attr_data *attr = data; + unsigned char *reg = (unsigned char *) etd + attr->field_offset; + int rc = 0; + + if (attr->reg) + rc = elantech_read_reg(psmouse, attr->reg, reg); + + return sprintf(buf, "0x%02x\n", (attr->reg && rc) ? -1 : *reg); +} + +/* + * Write a register value by writing a sysfs entry + */ +static ssize_t elantech_set_int_attr(struct psmouse *psmouse, + void *data, const char *buf, size_t count) +{ + struct elantech_data *etd = psmouse->private; + struct elantech_attr_data *attr = data; + unsigned char *reg = (unsigned char *) etd + attr->field_offset; + unsigned long value; + int err; + + err = strict_strtoul(buf, 16, &value); + if (err) + return err; + + if (value > 0xff) + return -EINVAL; + + /* Do we need to preserve some bits for version 2 hardware too? */ + if (etd->hw_version == 1) { + if (attr->reg == 0x10) + /* Force absolute mode always on */ + value |= ETP_R10_ABSOLUTE_MODE; + else if (attr->reg == 0x11) + /* Force 4 byte mode always on */ + value |= ETP_R11_4_BYTE_MODE; + } + + if (!attr->reg || elantech_write_reg(psmouse, attr->reg, value) == 0) + *reg = value; + + return count; +} + +#define ELANTECH_INT_ATTR(_name, _register) \ + static struct elantech_attr_data elantech_attr_##_name = { \ + .field_offset = offsetof(struct elantech_data, _name), \ + .reg = _register, \ + }; \ + PSMOUSE_DEFINE_ATTR(_name, S_IWUSR | S_IRUGO, \ + &elantech_attr_##_name, \ + elantech_show_int_attr, \ + elantech_set_int_attr) + +ELANTECH_INT_ATTR(reg_10, 0x10); +ELANTECH_INT_ATTR(reg_11, 0x11); +ELANTECH_INT_ATTR(reg_20, 0x20); +ELANTECH_INT_ATTR(reg_21, 0x21); +ELANTECH_INT_ATTR(reg_22, 0x22); +ELANTECH_INT_ATTR(reg_23, 0x23); +ELANTECH_INT_ATTR(reg_24, 0x24); +ELANTECH_INT_ATTR(reg_25, 0x25); +ELANTECH_INT_ATTR(reg_26, 0x26); +ELANTECH_INT_ATTR(debug, 0); +ELANTECH_INT_ATTR(paritycheck, 0); + +static struct attribute *elantech_attrs[] = { + &psmouse_attr_reg_10.dattr.attr, + &psmouse_attr_reg_11.dattr.attr, + &psmouse_attr_reg_20.dattr.attr, + &psmouse_attr_reg_21.dattr.attr, + &psmouse_attr_reg_22.dattr.attr, + &psmouse_attr_reg_23.dattr.attr, + &psmouse_attr_reg_24.dattr.attr, + &psmouse_attr_reg_25.dattr.attr, + &psmouse_attr_reg_26.dattr.attr, + &psmouse_attr_debug.dattr.attr, + &psmouse_attr_paritycheck.dattr.attr, + NULL +}; + +static struct attribute_group elantech_attr_group = { + .attrs = elantech_attrs, +}; + +/* + * Use magic knock to detect Elantech touchpad + */ +int elantech_detect(struct psmouse *psmouse, int set_properties) +{ + struct ps2dev *ps2dev = &psmouse->ps2dev; + unsigned char param[3]; + + ps2_command(&psmouse->ps2dev, NULL, PSMOUSE_CMD_RESET_DIS); + + if (ps2_command(ps2dev, NULL, PSMOUSE_CMD_DISABLE) || + ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE11) || + ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE11) || + ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE11) || + ps2_command(ps2dev, param, PSMOUSE_CMD_GETINFO)) { + pr_err("elantech.c: sending Elantech magic knock failed.\n"); + return -1; + } + + /* + * Report this in case there are Elantech models that use a different + * set of magic numbers + */ + if (param[0] != 0x3c || param[1] != 0x03 || param[2] != 0xc8) { + pr_info("elantech.c: unexpected magic knock result 0x%02x, 0x%02x, 0x%02x.\n", + param[0], param[1], param[2]); + return -1; + } + + if (set_properties) { + psmouse->vendor = "Elantech"; + psmouse->name = "Touchpad"; + } + + return 0; +} + +/* + * Clean up sysfs entries when disconnecting + */ +static void elantech_disconnect(struct psmouse *psmouse) +{ + sysfs_remove_group(&psmouse->ps2dev.serio->dev.kobj, + &elantech_attr_group); + kfree(psmouse->private); + psmouse->private = NULL; +} + +/* + * Put the touchpad back into absolute mode when reconnecting + */ +static int elantech_reconnect(struct psmouse *psmouse) +{ + if (elantech_detect(psmouse, 0)) + return -1; + + if (elantech_set_absolute_mode(psmouse)) { + pr_err("elantech.c: failed to put touchpad back into absolute mode.\n"); + return -1; + } + + return 0; +} + +/* + * Initialize the touchpad and create sysfs entries + */ +int elantech_init(struct psmouse *psmouse) +{ + struct elantech_data *etd; + int i, error; + unsigned char param[3]; + + etd = kzalloc(sizeof(struct elantech_data), GFP_KERNEL); + psmouse->private = etd; + if (!etd) + return -1; + + etd->parity[0] = 1; + for (i = 1; i < 256; i++) + etd->parity[i] = etd->parity[i & (i - 1)] ^ 1; + + /* + * Find out what version hardware this is + */ + if (synaptics_send_cmd(psmouse, ETP_FW_VERSION_QUERY, param)) { + pr_err("elantech.c: failed to query firmware version.\n"); + goto init_fail; + } + pr_info("elantech.c: Elantech version query result 0x%02x, 0x%02x, 0x%02x.\n", + param[0], param[1], param[2]); + etd->fw_version_maj = param[0]; + etd->fw_version_min = param[2]; + + /* + * Assume every version greater than this is new EeePC style + * hardware with 6 byte packets + */ + if (etd->fw_version_maj >= 0x02 && etd->fw_version_min >= 0x30) { + etd->hw_version = 2; + /* For now show extra debug information */ + etd->debug = 1; + /* Don't know how to do parity checking for version 2 */ + etd->paritycheck = 0; + } else { + etd->hw_version = 1; + etd->paritycheck = 1; + } + pr_info("elantech.c: assuming hardware version %d, firmware version %d.%d\n", + etd->hw_version, etd->fw_version_maj, etd->fw_version_min); + + if (synaptics_send_cmd(psmouse, ETP_CAPABILITIES_QUERY, param)) { + pr_err("elantech.c: failed to query capabilities.\n"); + goto init_fail; + } + pr_info("elantech.c: Synaptics capabilities query result 0x%02x, 0x%02x, 0x%02x.\n", + param[0], param[1], param[2]); + etd->capabilities = param[0]; + + if (elantech_set_absolute_mode(psmouse)) { + pr_err("elantech.c: failed to put touchpad into absolute mode.\n"); + goto init_fail; + } + + elantech_set_input_params(psmouse); + + error = sysfs_create_group(&psmouse->ps2dev.serio->dev.kobj, + &elantech_attr_group); + if (error) { + pr_err("elantech.c: failed to create sysfs attributes, error: %d.\n", + error); + goto init_fail; + } + + psmouse->protocol_handler = elantech_process_byte; + psmouse->disconnect = elantech_disconnect; + psmouse->reconnect = elantech_reconnect; + psmouse->pktsize = etd->hw_version == 2 ? 6 : 4; + + return 0; + + init_fail: + kfree(etd); + return -1; +} diff --git a/drivers/input/mouse/elantech.h b/drivers/input/mouse/elantech.h new file mode 100644 index 000000000000..bee282b540bc --- /dev/null +++ b/drivers/input/mouse/elantech.h @@ -0,0 +1,124 @@ +/* + * Elantech Touchpad driver (v5) + * + * Copyright (C) 2007-2008 Arjan Opmeer <arjan@opmeer.net> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + * Trademarks are the property of their respective owners. + */ + +#ifndef _ELANTECH_H +#define _ELANTECH_H + +/* + * Command values for Synaptics style queries + */ +#define ETP_FW_VERSION_QUERY 0x01 +#define ETP_CAPABILITIES_QUERY 0x02 + +/* + * Command values for register reading or writing + */ +#define ETP_REGISTER_READ 0x10 +#define ETP_REGISTER_WRITE 0x11 + +/* + * Hardware version 2 custom PS/2 command value + */ +#define ETP_PS2_CUSTOM_COMMAND 0xf8 + +/* + * Times to retry a ps2_command and millisecond delay between tries + */ +#define ETP_PS2_COMMAND_TRIES 3 +#define ETP_PS2_COMMAND_DELAY 500 + +/* + * Times to try to read back a register and millisecond delay between tries + */ +#define ETP_READ_BACK_TRIES 5 +#define ETP_READ_BACK_DELAY 2000 + +/* + * Register bitmasks for hardware version 1 + */ +#define ETP_R10_ABSOLUTE_MODE 0x04 +#define ETP_R11_4_BYTE_MODE 0x02 + +/* + * Capability bitmasks + */ +#define ETP_CAP_HAS_ROCKER 0x04 + +/* + * One hard to find application note states that X axis range is 0 to 576 + * and Y axis range is 0 to 384 for harware version 1. + * Edge fuzz might be necessary because of bezel around the touchpad + */ +#define ETP_EDGE_FUZZ_V1 32 + +#define ETP_XMIN_V1 ( 0 + ETP_EDGE_FUZZ_V1) +#define ETP_XMAX_V1 (576 - ETP_EDGE_FUZZ_V1) +#define ETP_YMIN_V1 ( 0 + ETP_EDGE_FUZZ_V1) +#define ETP_YMAX_V1 (384 - ETP_EDGE_FUZZ_V1) + +/* + * It seems the resolution for hardware version 2 doubled. + * Hence the X and Y ranges are doubled too. + * The bezel around the pad also appears to be smaller + */ +#define ETP_EDGE_FUZZ_V2 8 + +#define ETP_XMIN_V2 ( 0 + ETP_EDGE_FUZZ_V2) +#define ETP_XMAX_V2 (1152 - ETP_EDGE_FUZZ_V2) +#define ETP_YMIN_V2 ( 0 + ETP_EDGE_FUZZ_V2) +#define ETP_YMAX_V2 ( 768 - ETP_EDGE_FUZZ_V2) + +/* + * For two finger touches the coordinate of each finger gets reported + * separately but with reduced resolution. + */ +#define ETP_2FT_FUZZ 4 + +#define ETP_2FT_XMIN ( 0 + ETP_2FT_FUZZ) +#define ETP_2FT_XMAX (288 - ETP_2FT_FUZZ) +#define ETP_2FT_YMIN ( 0 + ETP_2FT_FUZZ) +#define ETP_2FT_YMAX (192 - ETP_2FT_FUZZ) + +struct elantech_data { + unsigned char reg_10; + unsigned char reg_11; + unsigned char reg_20; + unsigned char reg_21; + unsigned char reg_22; + unsigned char reg_23; + unsigned char reg_24; + unsigned char reg_25; + unsigned char reg_26; + unsigned char debug; + unsigned char capabilities; + unsigned char fw_version_maj; + unsigned char fw_version_min; + unsigned char hw_version; + unsigned char paritycheck; + unsigned char parity[256]; +}; + +#ifdef CONFIG_MOUSE_PS2_ELANTECH +int elantech_detect(struct psmouse *psmouse, int set_properties); +int elantech_init(struct psmouse *psmouse); +#else +static inline int elantech_detect(struct psmouse *psmouse, int set_properties) +{ + return -ENOSYS; +} +static inline int elantech_init(struct psmouse *psmouse) +{ + return -ENOSYS; +} +#endif /* CONFIG_MOUSE_PS2_ELANTECH */ + +#endif diff --git a/drivers/input/mouse/psmouse-base.c b/drivers/input/mouse/psmouse-base.c index 126e977e199e..f8f86de694bb 100644 --- a/drivers/input/mouse/psmouse-base.c +++ b/drivers/input/mouse/psmouse-base.c @@ -29,6 +29,7 @@ #include "lifebook.h" #include "trackpoint.h" #include "touchkit_ps2.h" +#include "elantech.h" #define DRIVER_DESC "PS/2 mouse driver" @@ -650,6 +651,19 @@ static int psmouse_extensions(struct psmouse *psmouse, max_proto = PSMOUSE_IMEX; } +/* + * Try Elantech touchpad. + */ + if (max_proto > PSMOUSE_IMEX && + elantech_detect(psmouse, set_properties) == 0) { + if (!set_properties || elantech_init(psmouse) == 0) + return PSMOUSE_ELANTECH; +/* + * Init failed, try basic relative protocols + */ + max_proto = PSMOUSE_IMEX; + } + if (max_proto > PSMOUSE_IMEX) { if (genius_detect(psmouse, set_properties) == 0) return PSMOUSE_GENPS; @@ -789,6 +803,15 @@ static const struct psmouse_protocol psmouse_protocols[] = { .detect = hgpk_detect, }, #endif +#ifdef CONFIG_MOUSE_PS2_ELANTECH + { + .type = PSMOUSE_ELANTECH, + .name = "ETPS/2", + .alias = "elantech", + .detect = elantech_detect, + .init = elantech_init, + }, + #endif { .type = PSMOUSE_CORTRON, .name = "CortronPS/2", diff --git a/drivers/input/mouse/psmouse.h b/drivers/input/mouse/psmouse.h index 8b608a1cdd12..54ed267894bd 100644 --- a/drivers/input/mouse/psmouse.h +++ b/drivers/input/mouse/psmouse.h @@ -90,6 +90,7 @@ enum psmouse_type { PSMOUSE_TOUCHKIT_PS2, PSMOUSE_CORTRON, PSMOUSE_HGPK, + PSMOUSE_ELANTECH, PSMOUSE_AUTO /* This one should always be last */ }; diff --git a/drivers/input/serio/i8042-x86ia64io.h b/drivers/input/serio/i8042-x86ia64io.h index a321aea2c7b5..eec375cd10e6 100644 --- a/drivers/input/serio/i8042-x86ia64io.h +++ b/drivers/input/serio/i8042-x86ia64io.h @@ -135,6 +135,14 @@ static struct dmi_system_id __initdata i8042_dmi_noloop_table[] = { DMI_MATCH(DMI_PRODUCT_VERSION, "5a"), }, }, + { + .ident = "Blue FB5601", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "blue"), + DMI_MATCH(DMI_PRODUCT_NAME, "FB5601"), + DMI_MATCH(DMI_PRODUCT_VERSION, "M606"), + }, + }, { } }; diff --git a/drivers/leds/leds-da903x.c b/drivers/leds/leds-da903x.c index f1fddb18d70d..2768c69257f6 100644 --- a/drivers/leds/leds-da903x.c +++ b/drivers/leds/leds-da903x.c @@ -17,6 +17,7 @@ #include <linux/init.h> #include <linux/platform_device.h> #include <linux/leds.h> +#include <linux/workqueue.h> #include <linux/mfd/da903x.h> #define DA9030_LED1_CONTROL 0x20 diff --git a/drivers/leds/leds-hp-disk.c b/drivers/leds/leds-hp-disk.c index 53a25b1c2dae..74645ab15660 100644 --- a/drivers/leds/leds-hp-disk.c +++ b/drivers/leds/leds-hp-disk.c @@ -49,7 +49,7 @@ static struct acpi_hpled adev; static acpi_status hpled_acpi_write(acpi_handle handle, int reg) { - unsigned long ret; /* Not used when writing */ + unsigned long long ret; /* Not used when writing */ union acpi_object in_obj[1]; struct acpi_object_list args = { 1, in_obj }; diff --git a/drivers/md/md.c b/drivers/md/md.c index c1a837ca193c..b4162f6f1b79 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -222,6 +222,9 @@ static void mddev_put(mddev_t *mddev) list_del(&mddev->all_mddevs); spin_unlock(&all_mddevs_lock); blk_cleanup_queue(mddev->queue); + if (mddev->sysfs_state) + sysfs_put(mddev->sysfs_state); + mddev->sysfs_state = NULL; kobject_put(&mddev->kobj); } else spin_unlock(&all_mddevs_lock); @@ -1459,6 +1462,8 @@ static int bind_rdev_to_array(mdk_rdev_t * rdev, mddev_t * mddev) kobject_del(&rdev->kobj); goto fail; } + rdev->sysfs_state = sysfs_get_dirent(rdev->kobj.sd, "state"); + list_add_rcu(&rdev->same_set, &mddev->disks); bd_claim_by_disk(rdev->bdev, rdev->bdev->bd_holder, mddev->gendisk); return 0; @@ -1488,7 +1493,8 @@ static void unbind_rdev_from_array(mdk_rdev_t * rdev) printk(KERN_INFO "md: unbind<%s>\n", bdevname(rdev->bdev,b)); rdev->mddev = NULL; sysfs_remove_link(&rdev->kobj, "block"); - + sysfs_put(rdev->sysfs_state); + rdev->sysfs_state = NULL; /* We need to delay this, otherwise we can deadlock when * writing to 'remove' to "dev/state". We also need * to delay it due to rcu usage. @@ -1923,8 +1929,8 @@ state_store(mdk_rdev_t *rdev, const char *buf, size_t len) err = 0; } - if (!err) - sysfs_notify(&rdev->kobj, NULL, "state"); + if (!err && rdev->sysfs_state) + sysfs_notify_dirent(rdev->sysfs_state); return err ? err : len; } static struct rdev_sysfs_entry rdev_state = @@ -2019,7 +2025,7 @@ slot_store(mdk_rdev_t *rdev, const char *buf, size_t len) rdev->raid_disk = -1; return err; } else - sysfs_notify(&rdev->kobj, NULL, "state"); + sysfs_notify_dirent(rdev->sysfs_state); sprintf(nm, "rd%d", rdev->raid_disk); if (sysfs_create_link(&rdev->mddev->kobj, &rdev->kobj, nm)) printk(KERN_WARNING @@ -2036,7 +2042,7 @@ slot_store(mdk_rdev_t *rdev, const char *buf, size_t len) clear_bit(Faulty, &rdev->flags); clear_bit(WriteMostly, &rdev->flags); set_bit(In_sync, &rdev->flags); - sysfs_notify(&rdev->kobj, NULL, "state"); + sysfs_notify_dirent(rdev->sysfs_state); } return len; } @@ -2770,7 +2776,7 @@ array_state_store(mddev_t *mddev, const char *buf, size_t len) if (err) return err; else { - sysfs_notify(&mddev->kobj, NULL, "array_state"); + sysfs_notify_dirent(mddev->sysfs_state); return len; } } @@ -3457,6 +3463,11 @@ static struct kobject *md_probe(dev_t dev, int *part, void *data) disk->fops = &md_fops; disk->private_data = mddev; disk->queue = mddev->queue; + /* Allow extended partitions. This makes the + * 'mdp' device redundant, but we can really + * remove it now. + */ + disk->flags |= GENHD_FL_EXT_DEVT; add_disk(disk); mddev->gendisk = disk; error = kobject_init_and_add(&mddev->kobj, &md_ktype, @@ -3465,8 +3476,10 @@ static struct kobject *md_probe(dev_t dev, int *part, void *data) if (error) printk(KERN_WARNING "md: cannot register %s/md - name in use\n", disk->disk_name); - else + else { kobject_uevent(&mddev->kobj, KOBJ_ADD); + mddev->sysfs_state = sysfs_get_dirent(mddev->kobj.sd, "array_state"); + } return NULL; } @@ -3477,7 +3490,7 @@ static void md_safemode_timeout(unsigned long data) if (!atomic_read(&mddev->writes_pending)) { mddev->safemode = 1; if (mddev->external) - set_bit(MD_NOTIFY_ARRAY_STATE, &mddev->flags); + sysfs_notify_dirent(mddev->sysfs_state); } md_wakeup_thread(mddev->thread); } @@ -3578,7 +3591,7 @@ static int do_md_run(mddev_t * mddev) return -EINVAL; } } - sysfs_notify(&rdev->kobj, NULL, "state"); + sysfs_notify_dirent(rdev->sysfs_state); } md_probe(mddev->unit, NULL, NULL); @@ -3740,7 +3753,7 @@ static int do_md_run(mddev_t * mddev) mddev->changed = 1; md_new_event(mddev); - sysfs_notify(&mddev->kobj, NULL, "array_state"); + sysfs_notify_dirent(mddev->sysfs_state); sysfs_notify(&mddev->kobj, NULL, "sync_action"); sysfs_notify(&mddev->kobj, NULL, "degraded"); kobject_uevent(&disk_to_dev(mddev->gendisk)->kobj, KOBJ_CHANGE); @@ -3767,7 +3780,7 @@ static int restart_array(mddev_t *mddev) set_bit(MD_RECOVERY_NEEDED, &mddev->recovery); md_wakeup_thread(mddev->thread); md_wakeup_thread(mddev->sync_thread); - sysfs_notify(&mddev->kobj, NULL, "array_state"); + sysfs_notify_dirent(mddev->sysfs_state); return 0; } @@ -3847,7 +3860,7 @@ static int do_md_stop(mddev_t * mddev, int mode, int is_open) module_put(mddev->pers->owner); mddev->pers = NULL; /* tell userspace to handle 'inactive' */ - sysfs_notify(&mddev->kobj, NULL, "array_state"); + sysfs_notify_dirent(mddev->sysfs_state); set_capacity(disk, 0); mddev->changed = 1; @@ -3933,7 +3946,7 @@ static int do_md_stop(mddev_t * mddev, int mode, int is_open) mdname(mddev)); err = 0; md_new_event(mddev); - sysfs_notify(&mddev->kobj, NULL, "array_state"); + sysfs_notify_dirent(mddev->sysfs_state); out: return err; } @@ -4297,7 +4310,7 @@ static int add_new_disk(mddev_t * mddev, mdu_disk_info_t *info) if (err) export_rdev(rdev); else - sysfs_notify(&rdev->kobj, NULL, "state"); + sysfs_notify_dirent(rdev->sysfs_state); md_update_sb(mddev, 1); if (mddev->degraded) @@ -4938,7 +4951,7 @@ static int md_ioctl(struct block_device *bdev, fmode_t mode, if (_IOC_TYPE(cmd) == MD_MAJOR && mddev->ro && mddev->pers) { if (mddev->ro == 2) { mddev->ro = 0; - sysfs_notify(&mddev->kobj, NULL, "array_state"); + sysfs_notify_dirent(mddev->sysfs_state); set_bit(MD_RECOVERY_NEEDED, &mddev->recovery); md_wakeup_thread(mddev->thread); } else { @@ -5612,7 +5625,7 @@ void md_write_start(mddev_t *mddev, struct bio *bi) spin_unlock_irq(&mddev->write_lock); } if (did_change) - sysfs_notify(&mddev->kobj, NULL, "array_state"); + sysfs_notify_dirent(mddev->sysfs_state); wait_event(mddev->sb_wait, !test_bit(MD_CHANGE_CLEAN, &mddev->flags) && !test_bit(MD_CHANGE_PENDING, &mddev->flags)); @@ -5655,7 +5668,7 @@ int md_allow_write(mddev_t *mddev) mddev->safemode = 1; spin_unlock_irq(&mddev->write_lock); md_update_sb(mddev, 0); - sysfs_notify(&mddev->kobj, NULL, "array_state"); + sysfs_notify_dirent(mddev->sysfs_state); } else spin_unlock_irq(&mddev->write_lock); @@ -6048,9 +6061,6 @@ void md_check_recovery(mddev_t *mddev) if (mddev->bitmap) bitmap_daemon_work(mddev->bitmap); - if (test_and_clear_bit(MD_NOTIFY_ARRAY_STATE, &mddev->flags)) - sysfs_notify(&mddev->kobj, NULL, "array_state"); - if (mddev->ro) return; @@ -6103,7 +6113,7 @@ void md_check_recovery(mddev_t *mddev) mddev->safemode = 0; spin_unlock_irq(&mddev->write_lock); if (did_change) - sysfs_notify(&mddev->kobj, NULL, "array_state"); + sysfs_notify_dirent(mddev->sysfs_state); } if (mddev->flags) @@ -6111,7 +6121,7 @@ void md_check_recovery(mddev_t *mddev) rdev_for_each(rdev, rtmp, mddev) if (test_and_clear_bit(StateChanged, &rdev->flags)) - sysfs_notify(&rdev->kobj, NULL, "state"); + sysfs_notify_dirent(rdev->sysfs_state); if (test_bit(MD_RECOVERY_RUNNING, &mddev->recovery) && @@ -6221,7 +6231,7 @@ void md_check_recovery(mddev_t *mddev) void md_wait_for_blocked_rdev(mdk_rdev_t *rdev, mddev_t *mddev) { - sysfs_notify(&rdev->kobj, NULL, "state"); + sysfs_notify_dirent(rdev->sysfs_state); wait_event_timeout(rdev->blocked_wait, !test_bit(Blocked, &rdev->flags), msecs_to_jiffies(5000)); diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index 5a79d2d4cdae..b550267c8d5e 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -103,8 +103,20 @@ config MFD_TC6393XB help Support for Toshiba Mobile IO Controller TC6393XB +config PMIC_DA903X + bool "Dialog Semiconductor DA9030/DA9034 PMIC Support" + depends on I2C=y + help + Say yes here to support for Dialog Semiconductor DA9030 (a.k.a + ARAVA) and DA9034 (a.k.a MICCO), these are Power Management IC + usually found on PXA processors-based platforms. This includes + the I2C driver and the core APIs _only_, you have to select + individual components like LCD backlight, voltage regulators, + LEDs and battery-charger under the corresponding menus. + config MFD_WM8400 tristate "Support Wolfson Microelectronics WM8400" + depends on I2C help Support for the Wolfson Microelecronics WM8400 PMIC and audio CODEC. This driver adds provides common support for accessing diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile index 0acefe8aff87..9a5ad8af9116 100644 --- a/drivers/mfd/Makefile +++ b/drivers/mfd/Makefile @@ -30,3 +30,5 @@ ifeq ($(CONFIG_SA1100_ASSABET),y) obj-$(CONFIG_MCP_UCB1200) += ucb1x00-assabet.o endif obj-$(CONFIG_UCB1400_CORE) += ucb1400_core.o + +obj-$(CONFIG_PMIC_DA903X) += da903x.o
\ No newline at end of file diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c index 2b4e975770f3..4b7cb389dc49 100644 --- a/drivers/net/r8169.c +++ b/drivers/net/r8169.c @@ -1915,92 +1915,6 @@ static void rtl_disable_msi(struct pci_dev *pdev, struct rtl8169_private *tp) } } -static int rtl_eeprom_read(struct pci_dev *pdev, int cap, int addr, __le32 *val) -{ - int ret, count = 100; - u16 status = 0; - u32 value; - - ret = pci_write_config_word(pdev, cap + PCI_VPD_ADDR, addr); - if (ret < 0) - return ret; - - do { - udelay(10); - ret = pci_read_config_word(pdev, cap + PCI_VPD_ADDR, &status); - if (ret < 0) - return ret; - } while (!(status & PCI_VPD_ADDR_F) && --count); - - if (!(status & PCI_VPD_ADDR_F)) - return -ETIMEDOUT; - - ret = pci_read_config_dword(pdev, cap + PCI_VPD_DATA, &value); - if (ret < 0) - return ret; - - *val = cpu_to_le32(value); - - return 0; -} - -static void rtl_init_mac_address(struct rtl8169_private *tp, - void __iomem *ioaddr) -{ - struct pci_dev *pdev = tp->pci_dev; - int vpd_cap; - __le32 sig; - u8 mac[8]; - u8 cfg1; - - cfg1 = RTL_R8(Config1); - if (!(cfg1 & VPD)) { - if (netif_msg_probe(tp)) - dev_info(&pdev->dev, "VPD access disabled, enabling\n"); - RTL_W8(Cfg9346, Cfg9346_Unlock); - RTL_W8(Config1, cfg1 | VPD); - RTL_W8(Cfg9346, Cfg9346_Lock); - } - - vpd_cap = pci_find_capability(pdev, PCI_CAP_ID_VPD); - if (!vpd_cap) - return; - - if (rtl_eeprom_read(pdev, vpd_cap, RTL_EEPROM_SIG_ADDR, &sig) < 0) - return; - - if ((sig & RTL_EEPROM_SIG_MASK) != RTL_EEPROM_SIG) { - dev_info(&pdev->dev, "Missing EEPROM signature: %08x\n", sig); - return; - } - - /* - * MAC address is stored in EEPROM at offset 0x0e - * Realtek says: "The VPD address does not have to be a DWORD-aligned - * address as defined in the PCI 2.2 Specifications, but the VPD data - * is always consecutive 4-byte data starting from the VPD address - * specified." - */ - if (rtl_eeprom_read(pdev, vpd_cap, 0x000e, (__le32*)&mac[0]) < 0 || - rtl_eeprom_read(pdev, vpd_cap, 0x0012, (__le32*)&mac[4]) < 0) { - if (netif_msg_probe(tp)) { - dev_warn(&pdev->dev, - "reading MAC address from EEPROM failed\n"); - } - return; - } - - if (netif_msg_probe(tp)) { - DECLARE_MAC_BUF(buf); - - dev_info(&pdev->dev, "MAC address found in EEPROM: %s\n", - print_mac(buf, mac)); - } - - if (is_valid_ether_addr(mac)) - rtl_rar_set(tp, mac); -} - static int __devinit rtl8169_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) { @@ -2178,8 +2092,6 @@ rtl8169_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) tp->mmio_addr = ioaddr; - rtl_init_mac_address(tp, ioaddr); - /* Get MAC address */ for (i = 0; i < MAC_ADDR_LEN; i++) dev->dev_addr[i] = RTL_R8(MAC0 + i); diff --git a/drivers/net/wireless/libertas/rx.c b/drivers/net/wireless/libertas/rx.c index 5749f22b296f..079e6aa874dc 100644 --- a/drivers/net/wireless/libertas/rx.c +++ b/drivers/net/wireless/libertas/rx.c @@ -328,7 +328,7 @@ static int process_rxed_802_11_packet(struct lbs_private *priv, lbs_deb_rx("rx err: frame received with bad length\n"); priv->stats.rx_length_errors++; ret = -EINVAL; - kfree(skb); + kfree_skb(skb); goto done; } diff --git a/drivers/pci/pci-acpi.c b/drivers/pci/pci-acpi.c index dfe7c8e1b185..b3a63edb6901 100644 --- a/drivers/pci/pci-acpi.c +++ b/drivers/pci/pci-acpi.c @@ -83,6 +83,9 @@ static acpi_status acpi_run_osc(acpi_handle handle, if (ACPI_FAILURE(status)) return status; + if (!output.length) + return AE_NULL_OBJECT; + out_obj = output.pointer; if (out_obj->type != ACPI_TYPE_BUFFER) { printk(KERN_DEBUG "Evaluate _OSC returns wrong type\n"); diff --git a/drivers/s390/char/tape_block.c b/drivers/s390/char/tape_block.c index 023803dbb0c7..ae18baf59f06 100644 --- a/drivers/s390/char/tape_block.c +++ b/drivers/s390/char/tape_block.c @@ -76,7 +76,7 @@ tapeblock_trigger_requeue(struct tape_device *device) static void tapeblock_end_request(struct request *req, int error) { - if (__blk_end_request(req, error, blk_rq_bytes(req))) + if (blk_end_request(req, error, blk_rq_bytes(req))) BUG(); } @@ -166,7 +166,7 @@ tapeblock_requeue(struct work_struct *work) { nr_queued++; spin_unlock(get_ccwdev_lock(device->cdev)); - spin_lock(&device->blk_data.request_queue_lock); + spin_lock_irq(&device->blk_data.request_queue_lock); while ( !blk_queue_plugged(queue) && elv_next_request(queue) && @@ -176,7 +176,9 @@ tapeblock_requeue(struct work_struct *work) { if (rq_data_dir(req) == WRITE) { DBF_EVENT(1, "TBLOCK: Rejecting write request\n"); blkdev_dequeue_request(req); + spin_unlock_irq(&device->blk_data.request_queue_lock); tapeblock_end_request(req, -EIO); + spin_lock_irq(&device->blk_data.request_queue_lock); continue; } blkdev_dequeue_request(req); diff --git a/drivers/s390/char/tape_core.c b/drivers/s390/char/tape_core.c index d7073dbf825c..f9bb51fa7f5b 100644 --- a/drivers/s390/char/tape_core.c +++ b/drivers/s390/char/tape_core.c @@ -1200,7 +1200,7 @@ tape_open(struct tape_device *device) { int rc; - spin_lock(get_ccwdev_lock(device->cdev)); + spin_lock_irq(get_ccwdev_lock(device->cdev)); if (device->tape_state == TS_NOT_OPER) { DBF_EVENT(6, "TAPE:nodev\n"); rc = -ENODEV; @@ -1218,7 +1218,7 @@ tape_open(struct tape_device *device) tape_state_set(device, TS_IN_USE); rc = 0; } - spin_unlock(get_ccwdev_lock(device->cdev)); + spin_unlock_irq(get_ccwdev_lock(device->cdev)); return rc; } @@ -1228,11 +1228,11 @@ tape_open(struct tape_device *device) int tape_release(struct tape_device *device) { - spin_lock(get_ccwdev_lock(device->cdev)); + spin_lock_irq(get_ccwdev_lock(device->cdev)); if (device->tape_state == TS_IN_USE) tape_state_set(device, TS_UNUSED); module_put(device->discipline->owner); - spin_unlock(get_ccwdev_lock(device->cdev)); + spin_unlock_irq(get_ccwdev_lock(device->cdev)); return 0; } diff --git a/drivers/s390/cio/qdio_debug.c b/drivers/s390/cio/qdio_debug.c index b5390821434f..f05590355be8 100644 --- a/drivers/s390/cio/qdio_debug.c +++ b/drivers/s390/cio/qdio_debug.c @@ -20,6 +20,7 @@ static struct dentry *debugfs_root; #define MAX_DEBUGFS_QUEUES 32 static struct dentry *debugfs_queues[MAX_DEBUGFS_QUEUES] = { NULL }; static DEFINE_MUTEX(debugfs_mutex); +#define QDIO_DEBUGFS_NAME_LEN 40 void qdio_allocate_do_dbf(struct qdio_initialize *init_data) { @@ -152,17 +153,6 @@ static int qstat_seq_open(struct inode *inode, struct file *filp) filp->f_path.dentry->d_inode->i_private); } -static void get_queue_name(struct qdio_q *q, struct ccw_device *cdev, char *name) -{ - memset(name, 0, sizeof(name)); - sprintf(name, "%s", dev_name(&cdev->dev)); - if (q->is_input_q) - sprintf(name + strlen(name), "_input"); - else - sprintf(name + strlen(name), "_output"); - sprintf(name + strlen(name), "_%d", q->nr); -} - static void remove_debugfs_entry(struct qdio_q *q) { int i; @@ -189,14 +179,17 @@ static struct file_operations debugfs_fops = { static void setup_debugfs_entry(struct qdio_q *q, struct ccw_device *cdev) { int i = 0; - char name[40]; + char name[QDIO_DEBUGFS_NAME_LEN]; while (debugfs_queues[i] != NULL) { i++; if (i >= MAX_DEBUGFS_QUEUES) return; } - get_queue_name(q, cdev, name); + snprintf(name, QDIO_DEBUGFS_NAME_LEN, "%s_%s_%d", + dev_name(&cdev->dev), + q->is_input_q ? "input" : "output", + q->nr); debugfs_queues[i] = debugfs_create_file(name, S_IFREG | S_IRUGO | S_IWUSR, debugfs_root, q, &debugfs_fops); } diff --git a/drivers/s390/cio/qdio_main.c b/drivers/s390/cio/qdio_main.c index a50682d2a0fa..7c8659151993 100644 --- a/drivers/s390/cio/qdio_main.c +++ b/drivers/s390/cio/qdio_main.c @@ -1083,7 +1083,6 @@ void qdio_int_handler(struct ccw_device *cdev, unsigned long intparm, case -EIO: sprintf(dbf_text, "ierr%4x", irq_ptr->schid.sch_no); QDIO_DBF_TEXT2(1, setup, dbf_text); - qdio_int_error(cdev); return; case -ETIMEDOUT: sprintf(dbf_text, "qtoh%4x", irq_ptr->schid.sch_no); |