diff options
Diffstat (limited to 'drivers')
26 files changed, 2989 insertions, 720 deletions
diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig index f7e79b481349..a3958c63d7d5 100644 --- a/drivers/input/keyboard/Kconfig +++ b/drivers/input/keyboard/Kconfig @@ -665,4 +665,14 @@ config KEYBOARD_CROS_EC To compile this driver as a module, choose M here: the module will be called cros_ec_keyb. +config KEYBOARD_CAP1106 + tristate "Microchip CAP1106 touch sensor" + depends on OF && I2C + select REGMAP_I2C + help + Say Y here to enable the CAP1106 touch sensor driver. + + To compile this driver as a module, choose M here: the + module will be called cap1106. + endif diff --git a/drivers/input/keyboard/Makefile b/drivers/input/keyboard/Makefile index 7504ae19049d..0a3345634d79 100644 --- a/drivers/input/keyboard/Makefile +++ b/drivers/input/keyboard/Makefile @@ -11,6 +11,7 @@ obj-$(CONFIG_KEYBOARD_AMIGA) += amikbd.o obj-$(CONFIG_KEYBOARD_ATARI) += atakbd.o obj-$(CONFIG_KEYBOARD_ATKBD) += atkbd.o obj-$(CONFIG_KEYBOARD_BFIN) += bf54x-keys.o +obj-$(CONFIG_KEYBOARD_CAP1106) += cap1106.o obj-$(CONFIG_KEYBOARD_CLPS711X) += clps711x-keypad.o obj-$(CONFIG_KEYBOARD_CROS_EC) += cros_ec_keyb.o obj-$(CONFIG_KEYBOARD_DAVINCI) += davinci_keyscan.o diff --git a/drivers/input/keyboard/cap1106.c b/drivers/input/keyboard/cap1106.c new file mode 100644 index 000000000000..f7d7a0d4ab4e --- /dev/null +++ b/drivers/input/keyboard/cap1106.c @@ -0,0 +1,335 @@ +/* + * Input driver for Microchip CAP1106, 6 channel capacitive touch sensor + * + * http://www.microchip.com/wwwproducts/Devices.aspx?product=CAP1106 + * + * (c) 2014 Daniel Mack <linux@zonque.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/interrupt.h> +#include <linux/input.h> +#include <linux/of_irq.h> +#include <linux/regmap.h> +#include <linux/i2c.h> +#include <linux/gpio/consumer.h> + +#define CAP1106_REG_MAIN_CONTROL 0x00 +#define CAP1106_REG_MAIN_CONTROL_GAIN_SHIFT (6) +#define CAP1106_REG_MAIN_CONTROL_GAIN_MASK (0xc0) +#define CAP1106_REG_MAIN_CONTROL_DLSEEP BIT(4) +#define CAP1106_REG_GENERAL_STATUS 0x02 +#define CAP1106_REG_SENSOR_INPUT 0x03 +#define CAP1106_REG_NOISE_FLAG_STATUS 0x0a +#define CAP1106_REG_SENOR_DELTA(X) (0x10 + (X)) +#define CAP1106_REG_SENSITIVITY_CONTROL 0x1f +#define CAP1106_REG_CONFIG 0x20 +#define CAP1106_REG_SENSOR_ENABLE 0x21 +#define CAP1106_REG_SENSOR_CONFIG 0x22 +#define CAP1106_REG_SENSOR_CONFIG2 0x23 +#define CAP1106_REG_SAMPLING_CONFIG 0x24 +#define CAP1106_REG_CALIBRATION 0x25 +#define CAP1106_REG_INT_ENABLE 0x26 +#define CAP1106_REG_REPEAT_RATE 0x28 +#define CAP1106_REG_MT_CONFIG 0x2a +#define CAP1106_REG_MT_PATTERN_CONFIG 0x2b +#define CAP1106_REG_MT_PATTERN 0x2d +#define CAP1106_REG_RECALIB_CONFIG 0x2f +#define CAP1106_REG_SENSOR_THRESH(X) (0x30 + (X)) +#define CAP1106_REG_SENSOR_NOISE_THRESH 0x38 +#define CAP1106_REG_STANDBY_CHANNEL 0x40 +#define CAP1106_REG_STANDBY_CONFIG 0x41 +#define CAP1106_REG_STANDBY_SENSITIVITY 0x42 +#define CAP1106_REG_STANDBY_THRESH 0x43 +#define CAP1106_REG_CONFIG2 0x44 +#define CAP1106_REG_SENSOR_BASE_CNT(X) (0x50 + (X)) +#define CAP1106_REG_SENSOR_CALIB (0xb1 + (X)) +#define CAP1106_REG_SENSOR_CALIB_LSB1 0xb9 +#define CAP1106_REG_SENSOR_CALIB_LSB2 0xba +#define CAP1106_REG_PRODUCT_ID 0xfd +#define CAP1106_REG_MANUFACTURER_ID 0xfe +#define CAP1106_REG_REVISION 0xff + +#define CAP1106_NUM_CHN 6 +#define CAP1106_PRODUCT_ID 0x55 +#define CAP1106_MANUFACTURER_ID 0x5d + +struct cap1106_priv { + struct regmap *regmap; + struct input_dev *idev; + + /* config */ + unsigned int keycodes[CAP1106_NUM_CHN]; +}; + +static const struct reg_default cap1106_reg_defaults[] = { + { CAP1106_REG_MAIN_CONTROL, 0x00 }, + { CAP1106_REG_GENERAL_STATUS, 0x00 }, + { CAP1106_REG_SENSOR_INPUT, 0x00 }, + { CAP1106_REG_NOISE_FLAG_STATUS, 0x00 }, + { CAP1106_REG_SENSITIVITY_CONTROL, 0x2f }, + { CAP1106_REG_CONFIG, 0x20 }, + { CAP1106_REG_SENSOR_ENABLE, 0x3f }, + { CAP1106_REG_SENSOR_CONFIG, 0xa4 }, + { CAP1106_REG_SENSOR_CONFIG2, 0x07 }, + { CAP1106_REG_SAMPLING_CONFIG, 0x39 }, + { CAP1106_REG_CALIBRATION, 0x00 }, + { CAP1106_REG_INT_ENABLE, 0x3f }, + { CAP1106_REG_REPEAT_RATE, 0x3f }, + { CAP1106_REG_MT_CONFIG, 0x80 }, + { CAP1106_REG_MT_PATTERN_CONFIG, 0x00 }, + { CAP1106_REG_MT_PATTERN, 0x3f }, + { CAP1106_REG_RECALIB_CONFIG, 0x8a }, + { CAP1106_REG_SENSOR_THRESH(0), 0x40 }, + { CAP1106_REG_SENSOR_THRESH(1), 0x40 }, + { CAP1106_REG_SENSOR_THRESH(2), 0x40 }, + { CAP1106_REG_SENSOR_THRESH(3), 0x40 }, + { CAP1106_REG_SENSOR_THRESH(4), 0x40 }, + { CAP1106_REG_SENSOR_THRESH(5), 0x40 }, + { CAP1106_REG_SENSOR_NOISE_THRESH, 0x01 }, + { CAP1106_REG_STANDBY_CHANNEL, 0x00 }, + { CAP1106_REG_STANDBY_CONFIG, 0x39 }, + { CAP1106_REG_STANDBY_SENSITIVITY, 0x02 }, + { CAP1106_REG_STANDBY_THRESH, 0x40 }, + { CAP1106_REG_CONFIG2, 0x40 }, + { CAP1106_REG_SENSOR_CALIB_LSB1, 0x00 }, + { CAP1106_REG_SENSOR_CALIB_LSB2, 0x00 }, +}; + +static bool cap1106_volatile_reg(struct device *dev, unsigned int reg) +{ + switch (reg) { + case CAP1106_REG_MAIN_CONTROL: + case CAP1106_REG_SENSOR_INPUT: + case CAP1106_REG_SENOR_DELTA(0): + case CAP1106_REG_SENOR_DELTA(1): + case CAP1106_REG_SENOR_DELTA(2): + case CAP1106_REG_SENOR_DELTA(3): + case CAP1106_REG_SENOR_DELTA(4): + case CAP1106_REG_SENOR_DELTA(5): + case CAP1106_REG_PRODUCT_ID: + case CAP1106_REG_MANUFACTURER_ID: + case CAP1106_REG_REVISION: + return true; + } + + return false; +} + +static const struct regmap_config cap1106_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + + .max_register = CAP1106_REG_REVISION, + .reg_defaults = cap1106_reg_defaults, + + .num_reg_defaults = ARRAY_SIZE(cap1106_reg_defaults), + .cache_type = REGCACHE_RBTREE, + .volatile_reg = cap1106_volatile_reg, +}; + +static irqreturn_t cap1106_thread_func(int irq_num, void *data) +{ + struct cap1106_priv *priv = data; + unsigned int status; + int ret, i; + + /* + * Deassert interrupt. This needs to be done before reading the status + * registers, which will not carry valid values otherwise. + */ + ret = regmap_update_bits(priv->regmap, CAP1106_REG_MAIN_CONTROL, 1, 0); + if (ret < 0) + goto out; + + ret = regmap_read(priv->regmap, CAP1106_REG_SENSOR_INPUT, &status); + if (ret < 0) + goto out; + + for (i = 0; i < CAP1106_NUM_CHN; i++) + input_report_key(priv->idev, priv->keycodes[i], + status & (1 << i)); + + input_sync(priv->idev); + +out: + return IRQ_HANDLED; +} + +static int cap1106_set_sleep(struct cap1106_priv *priv, bool sleep) +{ + return regmap_update_bits(priv->regmap, CAP1106_REG_MAIN_CONTROL, + CAP1106_REG_MAIN_CONTROL_DLSEEP, + sleep ? CAP1106_REG_MAIN_CONTROL_DLSEEP : 0); +} + +static int cap1106_input_open(struct input_dev *idev) +{ + struct cap1106_priv *priv = input_get_drvdata(idev); + + return cap1106_set_sleep(priv, false); +} + +static void cap1106_input_close(struct input_dev *idev) +{ + struct cap1106_priv *priv = input_get_drvdata(idev); + + cap1106_set_sleep(priv, true); +} + +static int cap1106_i2c_probe(struct i2c_client *i2c_client, + const struct i2c_device_id *id) +{ + struct device *dev = &i2c_client->dev; + struct cap1106_priv *priv; + struct device_node *node; + int i, error, irq, gain = 0; + unsigned int val, rev; + u32 gain32, keycodes[CAP1106_NUM_CHN]; + + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + priv->regmap = devm_regmap_init_i2c(i2c_client, &cap1106_regmap_config); + if (IS_ERR(priv->regmap)) + return PTR_ERR(priv->regmap); + + error = regmap_read(priv->regmap, CAP1106_REG_PRODUCT_ID, &val); + if (error) + return error; + + if (val != CAP1106_PRODUCT_ID) { + dev_err(dev, "Product ID: Got 0x%02x, expected 0x%02x\n", + val, CAP1106_PRODUCT_ID); + return -ENODEV; + } + + error = regmap_read(priv->regmap, CAP1106_REG_MANUFACTURER_ID, &val); + if (error) + return error; + + if (val != CAP1106_MANUFACTURER_ID) { + dev_err(dev, "Manufacturer ID: Got 0x%02x, expected 0x%02x\n", + val, CAP1106_MANUFACTURER_ID); + return -ENODEV; + } + + error = regmap_read(priv->regmap, CAP1106_REG_REVISION, &rev); + if (error < 0) + return error; + + dev_info(dev, "CAP1106 detected, revision 0x%02x\n", rev); + i2c_set_clientdata(i2c_client, priv); + node = dev->of_node; + + if (!of_property_read_u32(node, "microchip,sensor-gain", &gain32)) { + if (is_power_of_2(gain32) && gain32 <= 8) + gain = ilog2(gain32); + else + dev_err(dev, "Invalid sensor-gain value %d\n", gain32); + } + + BUILD_BUG_ON(ARRAY_SIZE(keycodes) != ARRAY_SIZE(priv->keycodes)); + + /* Provide some useful defaults */ + for (i = 0; i < ARRAY_SIZE(keycodes); i++) + keycodes[i] = KEY_A + i; + + of_property_read_u32_array(node, "linux,keycodes", + keycodes, ARRAY_SIZE(keycodes)); + + for (i = 0; i < ARRAY_SIZE(keycodes); i++) + priv->keycodes[i] = keycodes[i]; + + error = regmap_update_bits(priv->regmap, CAP1106_REG_MAIN_CONTROL, + CAP1106_REG_MAIN_CONTROL_GAIN_MASK, + gain << CAP1106_REG_MAIN_CONTROL_GAIN_SHIFT); + if (error) + return error; + + /* Disable autorepeat. The Linux input system has its own handling. */ + error = regmap_write(priv->regmap, CAP1106_REG_REPEAT_RATE, 0); + if (error) + return error; + + priv->idev = devm_input_allocate_device(dev); + if (!priv->idev) + return -ENOMEM; + + priv->idev->name = "CAP1106 capacitive touch sensor"; + priv->idev->id.bustype = BUS_I2C; + priv->idev->evbit[0] = BIT_MASK(EV_KEY); + + if (of_property_read_bool(node, "autorepeat")) + __set_bit(EV_REP, priv->idev->evbit); + + for (i = 0; i < CAP1106_NUM_CHN; i++) + __set_bit(priv->keycodes[i], priv->idev->keybit); + + priv->idev->id.vendor = CAP1106_MANUFACTURER_ID; + priv->idev->id.product = CAP1106_PRODUCT_ID; + priv->idev->id.version = rev; + + priv->idev->open = cap1106_input_open; + priv->idev->close = cap1106_input_close; + + input_set_drvdata(priv->idev, priv); + + /* + * Put the device in deep sleep mode for now. + * ->open() will bring it back once the it is actually needed. + */ + cap1106_set_sleep(priv, true); + + error = input_register_device(priv->idev); + if (error) + return error; + + irq = irq_of_parse_and_map(node, 0); + if (!irq) { + dev_err(dev, "Unable to parse or map IRQ\n"); + return -ENXIO; + } + + error = devm_request_threaded_irq(dev, irq, NULL, cap1106_thread_func, + IRQF_ONESHOT, dev_name(dev), priv); + if (error) + return error; + + return 0; +} + +static const struct of_device_id cap1106_dt_ids[] = { + { .compatible = "microchip,cap1106", }, + {} +}; +MODULE_DEVICE_TABLE(of, cap1106_dt_ids); + +static const struct i2c_device_id cap1106_i2c_ids[] = { + { "cap1106", 0 }, + {} +}; +MODULE_DEVICE_TABLE(i2c, cap1106_i2c_ids); + +static struct i2c_driver cap1106_i2c_driver = { + .driver = { + .name = "cap1106", + .owner = THIS_MODULE, + .of_match_table = cap1106_dt_ids, + }, + .id_table = cap1106_i2c_ids, + .probe = cap1106_i2c_probe, +}; + +module_i2c_driver(cap1106_i2c_driver); + +MODULE_ALIAS("platform:cap1106"); +MODULE_DESCRIPTION("Microchip CAP1106 driver"); +MODULE_AUTHOR("Daniel Mack <linux@zonque.org>"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/input/keyboard/imx_keypad.c b/drivers/input/keyboard/imx_keypad.c index 8280cb16260b..20a99c368d16 100644 --- a/drivers/input/keyboard/imx_keypad.c +++ b/drivers/input/keyboard/imx_keypad.c @@ -531,8 +531,7 @@ static int imx_keypad_probe(struct platform_device *pdev) return 0; } -#ifdef CONFIG_PM_SLEEP -static int imx_kbd_suspend(struct device *dev) +static int __maybe_unused imx_kbd_suspend(struct device *dev) { struct platform_device *pdev = to_platform_device(dev); struct imx_keypad *kbd = platform_get_drvdata(pdev); @@ -552,7 +551,7 @@ static int imx_kbd_suspend(struct device *dev) return 0; } -static int imx_kbd_resume(struct device *dev) +static int __maybe_unused imx_kbd_resume(struct device *dev) { struct platform_device *pdev = to_platform_device(dev); struct imx_keypad *kbd = platform_get_drvdata(pdev); @@ -575,7 +574,6 @@ err_clk: return ret; } -#endif static SIMPLE_DEV_PM_OPS(imx_kbd_pm_ops, imx_kbd_suspend, imx_kbd_resume); diff --git a/drivers/input/keyboard/max7359_keypad.c b/drivers/input/keyboard/max7359_keypad.c index 430b54539720..faa6da53eba8 100644 --- a/drivers/input/keyboard/max7359_keypad.c +++ b/drivers/input/keyboard/max7359_keypad.c @@ -203,12 +203,17 @@ static int max7359_probe(struct i2c_client *client, dev_dbg(&client->dev, "keys FIFO is 0x%02x\n", ret); - keypad = kzalloc(sizeof(struct max7359_keypad), GFP_KERNEL); - input_dev = input_allocate_device(); - if (!keypad || !input_dev) { + keypad = devm_kzalloc(&client->dev, sizeof(struct max7359_keypad), + GFP_KERNEL); + if (!keypad) { dev_err(&client->dev, "failed to allocate memory\n"); - error = -ENOMEM; - goto failed_free_mem; + return -ENOMEM; + } + + input_dev = devm_input_allocate_device(&client->dev); + if (!input_dev) { + dev_err(&client->dev, "failed to allocate input device\n"); + return -ENOMEM; } keypad->client = client; @@ -230,19 +235,20 @@ static int max7359_probe(struct i2c_client *client, max7359_build_keycode(keypad, keymap_data); - error = request_threaded_irq(client->irq, NULL, max7359_interrupt, - IRQF_TRIGGER_LOW | IRQF_ONESHOT, - client->name, keypad); + error = devm_request_threaded_irq(&client->dev, client->irq, NULL, + max7359_interrupt, + IRQF_TRIGGER_LOW | IRQF_ONESHOT, + client->name, keypad); if (error) { dev_err(&client->dev, "failed to register interrupt\n"); - goto failed_free_mem; + return error; } /* Register the input device */ error = input_register_device(input_dev); if (error) { dev_err(&client->dev, "failed to register input device\n"); - goto failed_free_irq; + return error; } /* Initialize MAX7359 */ @@ -252,24 +258,6 @@ static int max7359_probe(struct i2c_client *client, device_init_wakeup(&client->dev, 1); return 0; - -failed_free_irq: - free_irq(client->irq, keypad); -failed_free_mem: - input_free_device(input_dev); - kfree(keypad); - return error; -} - -static int max7359_remove(struct i2c_client *client) -{ - struct max7359_keypad *keypad = i2c_get_clientdata(client); - - free_irq(client->irq, keypad); - input_unregister_device(keypad->input_dev); - kfree(keypad); - - return 0; } #ifdef CONFIG_PM_SLEEP @@ -313,7 +301,6 @@ static struct i2c_driver max7359_i2c_driver = { .pm = &max7359_pm, }, .probe = max7359_probe, - .remove = max7359_remove, .id_table = max7359_ids, }; diff --git a/drivers/input/misc/keyspan_remote.c b/drivers/input/misc/keyspan_remote.c index 01f3b5b300f3..a3fe4a990cc9 100644 --- a/drivers/input/misc/keyspan_remote.c +++ b/drivers/input/misc/keyspan_remote.c @@ -392,7 +392,6 @@ static void keyspan_irq_recv(struct urb *urb) default: goto resubmit; - break; } if (debug) diff --git a/drivers/input/misc/soc_button_array.c b/drivers/input/misc/soc_button_array.c index 5a6334be30b8..e34dfc29beb3 100644 --- a/drivers/input/misc/soc_button_array.c +++ b/drivers/input/misc/soc_button_array.c @@ -83,6 +83,9 @@ soc_button_device_create(struct pnp_dev *pdev, sizeof(*gpio_keys_pdata) + sizeof(*gpio_keys) * MAX_NBUTTONS, GFP_KERNEL); + if (!gpio_keys_pdata) + return ERR_PTR(-ENOMEM); + gpio_keys = (void *)(gpio_keys_pdata + 1); for (info = button_info; info->name; info++) { diff --git a/drivers/input/misc/uinput.c b/drivers/input/misc/uinput.c index 856936247500..421e29e4cd81 100644 --- a/drivers/input/misc/uinput.c +++ b/drivers/input/misc/uinput.c @@ -311,7 +311,14 @@ static int uinput_open(struct inode *inode, struct file *file) static int uinput_validate_absbits(struct input_dev *dev) { unsigned int cnt; - int retval = 0; + int nslot; + + if (!test_bit(EV_ABS, dev->evbit)) + return 0; + + /* + * Check if absmin/absmax/absfuzz/absflat are sane. + */ for (cnt = 0; cnt < ABS_CNT; cnt++) { int min, max; @@ -327,8 +334,7 @@ static int uinput_validate_absbits(struct input_dev *dev) UINPUT_NAME, cnt, input_abs_get_min(dev, cnt), input_abs_get_max(dev, cnt)); - retval = -EINVAL; - break; + return -EINVAL; } if (input_abs_get_flat(dev, cnt) > @@ -340,11 +346,18 @@ static int uinput_validate_absbits(struct input_dev *dev) input_abs_get_flat(dev, cnt), input_abs_get_min(dev, cnt), input_abs_get_max(dev, cnt)); - retval = -EINVAL; - break; + return -EINVAL; } } - return retval; + + if (test_bit(ABS_MT_SLOT, dev->absbit)) { + nslot = input_abs_get_max(dev, ABS_MT_SLOT) + 1; + input_mt_init_slots(dev, nslot, 0); + } else if (test_bit(ABS_MT_POSITION_X, dev->absbit)) { + input_set_events_per_packet(dev, 60); + } + + return 0; } static int uinput_allocate_device(struct uinput_device *udev) @@ -410,19 +423,9 @@ static int uinput_setup_device(struct uinput_device *udev, input_abs_set_flat(dev, i, user_dev->absflat[i]); } - /* check if absmin/absmax/absfuzz/absflat are filled as - * told in Documentation/input/input-programming.txt */ - if (test_bit(EV_ABS, dev->evbit)) { - retval = uinput_validate_absbits(dev); - if (retval < 0) - goto exit; - if (test_bit(ABS_MT_SLOT, dev->absbit)) { - int nslot = input_abs_get_max(dev, ABS_MT_SLOT) + 1; - input_mt_init_slots(dev, nslot, 0); - } else if (test_bit(ABS_MT_POSITION_X, dev->absbit)) { - input_set_events_per_packet(dev, 60); - } - } + retval = uinput_validate_absbits(dev); + if (retval < 0) + goto exit; udev->state = UIST_SETUP_COMPLETE; retval = count; @@ -720,6 +723,12 @@ static long uinput_ioctl_handler(struct file *file, unsigned int cmd, } switch (cmd) { + case UI_GET_VERSION: + if (put_user(UINPUT_VERSION, + (unsigned int __user *)p)) + retval = -EFAULT; + goto out; + case UI_DEV_CREATE: retval = uinput_create_device(udev); goto out; diff --git a/drivers/input/mouse/alps.c b/drivers/input/mouse/alps.c index fb15c64ffb95..a59a1a64b674 100644 --- a/drivers/input/mouse/alps.c +++ b/drivers/input/mouse/alps.c @@ -99,6 +99,8 @@ static const struct alps_nibble_commands alps_v6_nibble_commands[] = { #define ALPS_FOUR_BUTTONS 0x40 /* 4 direction button present */ #define ALPS_PS2_INTERLEAVED 0x80 /* 3-byte PS/2 packet interleaved with 6-byte ALPS packet */ +#define ALPS_IS_RUSHMORE 0x100 /* device is a rushmore */ +#define ALPS_BUTTONPAD 0x200 /* device is a clickpad */ static const struct alps_model_info alps_model_data[] = { { { 0x32, 0x02, 0x14 }, 0x00, ALPS_PROTO_V2, 0xf8, 0xf8, ALPS_PASS | ALPS_DUALPOINT }, /* Toshiba Salellite Pro M10 */ @@ -281,11 +283,10 @@ static void alps_process_packet_v1_v2(struct psmouse *psmouse) * * The bitmaps don't have enough data to track fingers, so this function * only generates points representing a bounding box of at most two contacts. - * These two points are returned in x1, y1, x2, and y2. + * These two points are returned in fields->mt. */ static void alps_process_bitmap_dolphin(struct alps_data *priv, - struct alps_fields *fields, - int *x1, int *y1, int *x2, int *y2) + struct alps_fields *fields) { int box_middle_x, box_middle_y; unsigned int x_map, y_map; @@ -308,8 +309,6 @@ static void alps_process_bitmap_dolphin(struct alps_data *priv, if (x_msb > priv->x_bits || y_msb > priv->y_bits) return; - *x1 = *y1 = *x2 = *y2 = 0; - if (fields->fingers > 1) { start_bit = priv->x_bits - x_msb; end_bit = priv->x_bits - x_lsb; @@ -320,10 +319,35 @@ static void alps_process_bitmap_dolphin(struct alps_data *priv, end_bit = y_msb - 1; box_middle_y = (priv->y_max * (start_bit + end_bit)) / (2 * (priv->y_bits - 1)); - *x1 = fields->x; - *y1 = fields->y; - *x2 = 2 * box_middle_x - *x1; - *y2 = 2 * box_middle_y - *y1; + fields->mt[0] = fields->st; + fields->mt[1].x = 2 * box_middle_x - fields->mt[0].x; + fields->mt[1].y = 2 * box_middle_y - fields->mt[0].y; + } +} + +static void alps_get_bitmap_points(unsigned int map, + struct alps_bitmap_point *low, + struct alps_bitmap_point *high, + int *fingers) +{ + struct alps_bitmap_point *point; + int i, bit, prev_bit = 0; + + point = low; + for (i = 0; map != 0; i++, map >>= 1) { + bit = map & 1; + if (bit) { + if (!prev_bit) { + point->start_bit = i; + point->num_bits = 0; + (*fingers)++; + } + point->num_bits++; + } else { + if (prev_bit) + point = high; + } + prev_bit = bit; } } @@ -334,71 +358,21 @@ static void alps_process_bitmap_dolphin(struct alps_data *priv, * * The bitmaps don't have enough data to track fingers, so this function * only generates points representing a bounding box of all contacts. - * These points are returned in x1, y1, x2, and y2 when the return value + * These points are returned in fields->mt when the return value * is greater than 0. */ static int alps_process_bitmap(struct alps_data *priv, - unsigned int x_map, unsigned int y_map, - int *x1, int *y1, int *x2, int *y2) + struct alps_fields *fields) { - struct alps_bitmap_point { - int start_bit; - int num_bits; - }; - - int fingers_x = 0, fingers_y = 0, fingers; - int i, bit, prev_bit; + int i, fingers_x = 0, fingers_y = 0, fingers; struct alps_bitmap_point x_low = {0,}, x_high = {0,}; struct alps_bitmap_point y_low = {0,}, y_high = {0,}; - struct alps_bitmap_point *point; - if (!x_map || !y_map) + if (!fields->x_map || !fields->y_map) return 0; - *x1 = *y1 = *x2 = *y2 = 0; - - prev_bit = 0; - point = &x_low; - for (i = 0; x_map != 0; i++, x_map >>= 1) { - bit = x_map & 1; - if (bit) { - if (!prev_bit) { - point->start_bit = i; - fingers_x++; - } - point->num_bits++; - } else { - if (prev_bit) - point = &x_high; - else - point->num_bits = 0; - } - prev_bit = bit; - } - - /* - * y bitmap is reversed for what we need (lower positions are in - * higher bits), so we process from the top end. - */ - y_map = y_map << (sizeof(y_map) * BITS_PER_BYTE - priv->y_bits); - prev_bit = 0; - point = &y_low; - for (i = 0; y_map != 0; i++, y_map <<= 1) { - bit = y_map & (1 << (sizeof(y_map) * BITS_PER_BYTE - 1)); - if (bit) { - if (!prev_bit) { - point->start_bit = i; - fingers_y++; - } - point->num_bits++; - } else { - if (prev_bit) - point = &y_high; - else - point->num_bits = 0; - } - prev_bit = bit; - } + alps_get_bitmap_points(fields->x_map, &x_low, &x_high, &fingers_x); + alps_get_bitmap_points(fields->y_map, &y_low, &y_high, &fingers_y); /* * Fingers can overlap, so we use the maximum count of fingers @@ -407,58 +381,91 @@ static int alps_process_bitmap(struct alps_data *priv, fingers = max(fingers_x, fingers_y); /* - * If total fingers is > 1 but either axis reports only a single - * contact, we have overlapping or adjacent fingers. For the - * purposes of creating a bounding box, divide the single contact - * (roughly) equally between the two points. + * If an axis reports only a single contact, we have overlapping or + * adjacent fingers. Divide the single contact between the two points. */ - if (fingers > 1) { - if (fingers_x == 1) { - i = x_low.num_bits / 2; - x_low.num_bits = x_low.num_bits - i; - x_high.start_bit = x_low.start_bit + i; - x_high.num_bits = max(i, 1); - } else if (fingers_y == 1) { - i = y_low.num_bits / 2; - y_low.num_bits = y_low.num_bits - i; - y_high.start_bit = y_low.start_bit + i; - y_high.num_bits = max(i, 1); - } + if (fingers_x == 1) { + i = (x_low.num_bits - 1) / 2; + x_low.num_bits = x_low.num_bits - i; + x_high.start_bit = x_low.start_bit + i; + x_high.num_bits = max(i, 1); + } + if (fingers_y == 1) { + i = (y_low.num_bits - 1) / 2; + y_low.num_bits = y_low.num_bits - i; + y_high.start_bit = y_low.start_bit + i; + y_high.num_bits = max(i, 1); } - *x1 = (priv->x_max * (2 * x_low.start_bit + x_low.num_bits - 1)) / - (2 * (priv->x_bits - 1)); - *y1 = (priv->y_max * (2 * y_low.start_bit + y_low.num_bits - 1)) / - (2 * (priv->y_bits - 1)); - - if (fingers > 1) { - *x2 = (priv->x_max * - (2 * x_high.start_bit + x_high.num_bits - 1)) / - (2 * (priv->x_bits - 1)); - *y2 = (priv->y_max * - (2 * y_high.start_bit + y_high.num_bits - 1)) / - (2 * (priv->y_bits - 1)); + fields->mt[0].x = + (priv->x_max * (2 * x_low.start_bit + x_low.num_bits - 1)) / + (2 * (priv->x_bits - 1)); + fields->mt[0].y = + (priv->y_max * (2 * y_low.start_bit + y_low.num_bits - 1)) / + (2 * (priv->y_bits - 1)); + + fields->mt[1].x = + (priv->x_max * (2 * x_high.start_bit + x_high.num_bits - 1)) / + (2 * (priv->x_bits - 1)); + fields->mt[1].y = + (priv->y_max * (2 * y_high.start_bit + y_high.num_bits - 1)) / + (2 * (priv->y_bits - 1)); + + /* y-bitmap order is reversed, except on rushmore */ + if (!(priv->flags & ALPS_IS_RUSHMORE)) { + fields->mt[0].y = priv->y_max - fields->mt[0].y; + fields->mt[1].y = priv->y_max - fields->mt[1].y; } return fingers; } -static void alps_set_slot(struct input_dev *dev, int slot, bool active, - int x, int y) +static void alps_set_slot(struct input_dev *dev, int slot, int x, int y) { input_mt_slot(dev, slot); - input_mt_report_slot_state(dev, MT_TOOL_FINGER, active); - if (active) { - input_report_abs(dev, ABS_MT_POSITION_X, x); - input_report_abs(dev, ABS_MT_POSITION_Y, y); - } + input_mt_report_slot_state(dev, MT_TOOL_FINGER, true); + input_report_abs(dev, ABS_MT_POSITION_X, x); + input_report_abs(dev, ABS_MT_POSITION_Y, y); } -static void alps_report_semi_mt_data(struct input_dev *dev, int num_fingers, - int x1, int y1, int x2, int y2) +static void alps_report_mt_data(struct psmouse *psmouse, int n) { - alps_set_slot(dev, 0, num_fingers != 0, x1, y1); - alps_set_slot(dev, 1, num_fingers == 2, x2, y2); + struct alps_data *priv = psmouse->private; + struct input_dev *dev = psmouse->dev; + struct alps_fields *f = &priv->f; + int i, slot[MAX_TOUCHES]; + + input_mt_assign_slots(dev, slot, f->mt, n); + for (i = 0; i < n; i++) + alps_set_slot(dev, slot[i], f->mt[i].x, f->mt[i].y); + + input_mt_sync_frame(dev); +} + +static void alps_report_semi_mt_data(struct psmouse *psmouse, int fingers) +{ + struct alps_data *priv = psmouse->private; + struct input_dev *dev = psmouse->dev; + struct alps_fields *f = &priv->f; + + /* Use st data when we don't have mt data */ + if (fingers < 2) { + f->mt[0].x = f->st.x; + f->mt[0].y = f->st.y; + fingers = f->pressure > 0 ? 1 : 0; + } + + alps_report_mt_data(psmouse, (fingers <= 2) ? fingers : 2); + + input_mt_report_finger_count(dev, fingers); + + input_report_key(dev, BTN_LEFT, f->left); + input_report_key(dev, BTN_RIGHT, f->right); + input_report_key(dev, BTN_MIDDLE, f->middle); + + input_report_abs(dev, ABS_PRESSURE, f->pressure); + + input_sync(dev); } static void alps_process_trackstick_packet_v3(struct psmouse *psmouse) @@ -532,7 +539,7 @@ static void alps_decode_buttons_v3(struct alps_fields *f, unsigned char *p) f->ts_middle = !!(p[3] & 0x40); } -static void alps_decode_pinnacle(struct alps_fields *f, unsigned char *p, +static int alps_decode_pinnacle(struct alps_fields *f, unsigned char *p, struct psmouse *psmouse) { f->first_mp = !!(p[4] & 0x40); @@ -546,24 +553,31 @@ static void alps_decode_pinnacle(struct alps_fields *f, unsigned char *p, ((p[2] & 0x7f) << 1) | (p[4] & 0x01); - f->x = ((p[1] & 0x7f) << 4) | ((p[4] & 0x30) >> 2) | + f->st.x = ((p[1] & 0x7f) << 4) | ((p[4] & 0x30) >> 2) | ((p[0] & 0x30) >> 4); - f->y = ((p[2] & 0x7f) << 4) | (p[4] & 0x0f); - f->z = p[5] & 0x7f; + f->st.y = ((p[2] & 0x7f) << 4) | (p[4] & 0x0f); + f->pressure = p[5] & 0x7f; alps_decode_buttons_v3(f, p); + + return 0; } -static void alps_decode_rushmore(struct alps_fields *f, unsigned char *p, +static int alps_decode_rushmore(struct alps_fields *f, unsigned char *p, struct psmouse *psmouse) { alps_decode_pinnacle(f, p, psmouse); + /* Rushmore's packet decode has a bit difference with Pinnacle's */ + f->is_mp = !!(p[5] & 0x40); + f->fingers = max((p[5] & 0x3), ((p[5] >> 2) & 0x3)) + 1; f->x_map |= (p[5] & 0x10) << 11; f->y_map |= (p[5] & 0x20) << 6; + + return 0; } -static void alps_decode_dolphin(struct alps_fields *f, unsigned char *p, +static int alps_decode_dolphin(struct alps_fields *f, unsigned char *p, struct psmouse *psmouse) { u64 palm_data = 0; @@ -573,9 +587,9 @@ static void alps_decode_dolphin(struct alps_fields *f, unsigned char *p, f->is_mp = !!(p[0] & 0x20); if (!f->is_mp) { - f->x = ((p[1] & 0x7f) | ((p[4] & 0x0f) << 7)); - f->y = ((p[2] & 0x7f) | ((p[4] & 0xf0) << 3)); - f->z = (p[0] & 4) ? 0 : p[5] & 0x7f; + f->st.x = ((p[1] & 0x7f) | ((p[4] & 0x0f) << 7)); + f->st.y = ((p[2] & 0x7f) | ((p[4] & 0xf0) << 3)); + f->pressure = (p[0] & 4) ? 0 : p[5] & 0x7f; alps_decode_buttons_v3(f, p); } else { f->fingers = ((p[0] & 0x6) >> 1 | @@ -596,19 +610,21 @@ static void alps_decode_dolphin(struct alps_fields *f, unsigned char *p, f->x_map = (palm_data >> priv->y_bits) & (BIT(priv->x_bits) - 1); } + + return 0; } static void alps_process_touchpad_packet_v3_v5(struct psmouse *psmouse) { struct alps_data *priv = psmouse->private; unsigned char *packet = psmouse->packet; - struct input_dev *dev = psmouse->dev; struct input_dev *dev2 = priv->dev2; - int x1 = 0, y1 = 0, x2 = 0, y2 = 0; - int fingers = 0, bmap_fn; - struct alps_fields f = {0}; + struct alps_fields *f = &priv->f; + int fingers = 0; - priv->decode_fields(&f, packet, psmouse); + memset(f, 0, sizeof(*f)); + + priv->decode_fields(f, packet, psmouse); /* * There's no single feature of touchpad position and bitmap packets @@ -623,22 +639,14 @@ static void alps_process_touchpad_packet_v3_v5(struct psmouse *psmouse) * packet. Check for this, and when it happens process the * position packet as usual. */ - if (f.is_mp) { - fingers = f.fingers; + if (f->is_mp) { + fingers = f->fingers; if (priv->proto_version == ALPS_PROTO_V3) { - bmap_fn = alps_process_bitmap(priv, f.x_map, - f.y_map, &x1, &y1, - &x2, &y2); - - /* - * We shouldn't report more than one finger if - * we don't have two coordinates. - */ - if (fingers > 1 && bmap_fn < 2) - fingers = bmap_fn; + if (alps_process_bitmap(priv, f) == 0) + fingers = 0; /* Use st data */ /* Now process position packet */ - priv->decode_fields(&f, priv->multi_data, + priv->decode_fields(f, priv->multi_data, psmouse); } else { /* @@ -647,15 +655,14 @@ static void alps_process_touchpad_packet_v3_v5(struct psmouse *psmouse) * calculate Pt2, so we need to do position * packet decode first. */ - priv->decode_fields(&f, priv->multi_data, + priv->decode_fields(f, priv->multi_data, psmouse); /* * Since Dolphin's finger number is reliable, * there is no need to compare with bmap_fn. */ - alps_process_bitmap_dolphin(priv, &f, &x1, &y1, - &x2, &y2); + alps_process_bitmap_dolphin(priv, f); } } else { priv->multi_packet = 0; @@ -670,10 +677,10 @@ static void alps_process_touchpad_packet_v3_v5(struct psmouse *psmouse) * out misidentified bitmap packets, we reject anything with this * bit set. */ - if (f.is_mp) + if (f->is_mp) return; - if (!priv->multi_packet && f.first_mp) { + if (!priv->multi_packet && f->first_mp) { priv->multi_packet = 1; memcpy(priv->multi_data, packet, sizeof(priv->multi_data)); return; @@ -687,44 +694,15 @@ static void alps_process_touchpad_packet_v3_v5(struct psmouse *psmouse) * with x, y, and z all zero, so these seem to be flukes. * Ignore them. */ - if (f.x && f.y && !f.z) + if (f->st.x && f->st.y && !f->pressure) return; - /* - * If we don't have MT data or the bitmaps were empty, we have - * to rely on ST data. - */ - if (!fingers) { - x1 = f.x; - y1 = f.y; - fingers = f.z > 0 ? 1 : 0; - } - - if (f.z >= 64) - input_report_key(dev, BTN_TOUCH, 1); - else - input_report_key(dev, BTN_TOUCH, 0); - - alps_report_semi_mt_data(dev, fingers, x1, y1, x2, y2); - - input_mt_report_finger_count(dev, fingers); - - input_report_key(dev, BTN_LEFT, f.left); - input_report_key(dev, BTN_RIGHT, f.right); - input_report_key(dev, BTN_MIDDLE, f.middle); - - if (f.z > 0) { - input_report_abs(dev, ABS_X, f.x); - input_report_abs(dev, ABS_Y, f.y); - } - input_report_abs(dev, ABS_PRESSURE, f.z); - - input_sync(dev); + alps_report_semi_mt_data(psmouse, fingers); if (!(priv->quirks & ALPS_QUIRK_TRACKSTICK_BUTTONS)) { - input_report_key(dev2, BTN_LEFT, f.ts_left); - input_report_key(dev2, BTN_RIGHT, f.ts_right); - input_report_key(dev2, BTN_MIDDLE, f.ts_middle); + input_report_key(dev2, BTN_LEFT, f->ts_left); + input_report_key(dev2, BTN_RIGHT, f->ts_right); + input_report_key(dev2, BTN_MIDDLE, f->ts_middle); input_sync(dev2); } } @@ -823,13 +801,8 @@ static void alps_process_packet_v4(struct psmouse *psmouse) { struct alps_data *priv = psmouse->private; unsigned char *packet = psmouse->packet; - struct input_dev *dev = psmouse->dev; + struct alps_fields *f = &priv->f; int offset; - int x, y, z; - int left, right; - int x1, y1, x2, y2; - int fingers = 0; - unsigned int x_bitmap, y_bitmap; /* * v4 has a 6-byte encoding for bitmap data, but this data is @@ -851,71 +824,207 @@ static void alps_process_packet_v4(struct psmouse *psmouse) if (++priv->multi_packet > 2) { priv->multi_packet = 0; - x_bitmap = ((priv->multi_data[2] & 0x1f) << 10) | + f->x_map = ((priv->multi_data[2] & 0x1f) << 10) | ((priv->multi_data[3] & 0x60) << 3) | ((priv->multi_data[0] & 0x3f) << 2) | ((priv->multi_data[1] & 0x60) >> 5); - y_bitmap = ((priv->multi_data[5] & 0x01) << 10) | + f->y_map = ((priv->multi_data[5] & 0x01) << 10) | ((priv->multi_data[3] & 0x1f) << 5) | (priv->multi_data[1] & 0x1f); - fingers = alps_process_bitmap(priv, x_bitmap, y_bitmap, - &x1, &y1, &x2, &y2); - - /* Store MT data.*/ - priv->fingers = fingers; - priv->x1 = x1; - priv->x2 = x2; - priv->y1 = y1; - priv->y2 = y2; + f->fingers = alps_process_bitmap(priv, f); } - left = packet[4] & 0x01; - right = packet[4] & 0x02; + f->left = packet[4] & 0x01; + f->right = packet[4] & 0x02; - x = ((packet[1] & 0x7f) << 4) | ((packet[3] & 0x30) >> 2) | - ((packet[0] & 0x30) >> 4); - y = ((packet[2] & 0x7f) << 4) | (packet[3] & 0x0f); - z = packet[5] & 0x7f; + f->st.x = ((packet[1] & 0x7f) << 4) | ((packet[3] & 0x30) >> 2) | + ((packet[0] & 0x30) >> 4); + f->st.y = ((packet[2] & 0x7f) << 4) | (packet[3] & 0x0f); + f->pressure = packet[5] & 0x7f; - /* - * If there were no contacts in the bitmap, use ST - * points in MT reports. - * If there were two contacts or more, report MT data. - */ - if (priv->fingers < 2) { - x1 = x; - y1 = y; - fingers = z > 0 ? 1 : 0; - } else { - fingers = priv->fingers; - x1 = priv->x1; - x2 = priv->x2; - y1 = priv->y1; - y2 = priv->y2; + alps_report_semi_mt_data(psmouse, f->fingers); +} + +static bool alps_is_valid_package_v7(struct psmouse *psmouse) +{ + switch (psmouse->pktcnt) { + case 3: + return (psmouse->packet[2] & 0x40) == 0x40; + case 4: + return (psmouse->packet[3] & 0x48) == 0x48; + case 6: + return (psmouse->packet[5] & 0x40) == 0x00; } + return true; +} - if (z >= 64) - input_report_key(dev, BTN_TOUCH, 1); +static unsigned char alps_get_packet_id_v7(char *byte) +{ + unsigned char packet_id; + + if (byte[4] & 0x40) + packet_id = V7_PACKET_ID_TWO; + else if (byte[4] & 0x01) + packet_id = V7_PACKET_ID_MULTI; + else if ((byte[0] & 0x10) && !(byte[4] & 0x43)) + packet_id = V7_PACKET_ID_NEW; + else if (byte[1] == 0x00 && byte[4] == 0x00) + packet_id = V7_PACKET_ID_IDLE; else - input_report_key(dev, BTN_TOUCH, 0); + packet_id = V7_PACKET_ID_UNKNOWN; - alps_report_semi_mt_data(dev, fingers, x1, y1, x2, y2); + return packet_id; +} - input_mt_report_finger_count(dev, fingers); +static void alps_get_finger_coordinate_v7(struct input_mt_pos *mt, + unsigned char *pkt, + unsigned char pkt_id) +{ + mt[0].x = ((pkt[2] & 0x80) << 4); + mt[0].x |= ((pkt[2] & 0x3F) << 5); + mt[0].x |= ((pkt[3] & 0x30) >> 1); + mt[0].x |= (pkt[3] & 0x07); + mt[0].y = (pkt[1] << 3) | (pkt[0] & 0x07); + + mt[1].x = ((pkt[3] & 0x80) << 4); + mt[1].x |= ((pkt[4] & 0x80) << 3); + mt[1].x |= ((pkt[4] & 0x3F) << 4); + mt[1].y = ((pkt[5] & 0x80) << 3); + mt[1].y |= ((pkt[5] & 0x3F) << 4); + + switch (pkt_id) { + case V7_PACKET_ID_TWO: + mt[1].x &= ~0x000F; + mt[1].y |= 0x000F; + break; - input_report_key(dev, BTN_LEFT, left); - input_report_key(dev, BTN_RIGHT, right); + case V7_PACKET_ID_MULTI: + mt[1].x &= ~0x003F; + mt[1].y &= ~0x0020; + mt[1].y |= ((pkt[4] & 0x02) << 4); + mt[1].y |= 0x001F; + break; - if (z > 0) { - input_report_abs(dev, ABS_X, x); - input_report_abs(dev, ABS_Y, y); + case V7_PACKET_ID_NEW: + mt[1].x &= ~0x003F; + mt[1].x |= (pkt[0] & 0x20); + mt[1].y |= 0x000F; + break; } - input_report_abs(dev, ABS_PRESSURE, z); + + mt[0].y = 0x7FF - mt[0].y; + mt[1].y = 0x7FF - mt[1].y; +} + +static int alps_get_mt_count(struct input_mt_pos *mt) +{ + int i; + + for (i = 0; i < MAX_TOUCHES && mt[i].x != 0 && mt[i].y != 0; i++) + /* empty */; + + return i; +} + +static int alps_decode_packet_v7(struct alps_fields *f, + unsigned char *p, + struct psmouse *psmouse) +{ + unsigned char pkt_id; + + pkt_id = alps_get_packet_id_v7(p); + if (pkt_id == V7_PACKET_ID_IDLE) + return 0; + if (pkt_id == V7_PACKET_ID_UNKNOWN) + return -1; + + alps_get_finger_coordinate_v7(f->mt, p, pkt_id); + + if (pkt_id == V7_PACKET_ID_TWO || pkt_id == V7_PACKET_ID_MULTI) { + f->left = (p[0] & 0x80) >> 7; + f->right = (p[0] & 0x20) >> 5; + f->middle = (p[0] & 0x10) >> 4; + } + + if (pkt_id == V7_PACKET_ID_TWO) + f->fingers = alps_get_mt_count(f->mt); + else if (pkt_id == V7_PACKET_ID_MULTI) + f->fingers = 3 + (p[5] & 0x03); + + return 0; +} + +static void alps_process_trackstick_packet_v7(struct psmouse *psmouse) +{ + struct alps_data *priv = psmouse->private; + unsigned char *packet = psmouse->packet; + struct input_dev *dev2 = priv->dev2; + int x, y, z, left, right, middle; + + /* + * b7 b6 b5 b4 b3 b2 b1 b0 + * Byte0 0 1 0 0 1 0 0 0 + * Byte1 1 1 * * 1 M R L + * Byte2 X7 1 X5 X4 X3 X2 X1 X0 + * Byte3 Z6 1 Y6 X6 1 Y2 Y1 Y0 + * Byte4 Y7 0 Y5 Y4 Y3 1 1 0 + * Byte5 T&P 0 Z5 Z4 Z3 Z2 Z1 Z0 + * M / R / L: Middle / Right / Left button + */ + + x = ((packet[2] & 0xbf)) | ((packet[3] & 0x10) << 2); + y = (packet[3] & 0x07) | (packet[4] & 0xb8) | + ((packet[3] & 0x20) << 1); + z = (packet[5] & 0x3f) | ((packet[3] & 0x80) >> 1); + + left = (packet[1] & 0x01); + right = (packet[1] & 0x02) >> 1; + middle = (packet[1] & 0x04) >> 2; + + /* Divide 2 since trackpoint's speed is too fast */ + input_report_rel(dev2, REL_X, (char)x / 2); + input_report_rel(dev2, REL_Y, -((char)y / 2)); + + input_report_key(dev2, BTN_LEFT, left); + input_report_key(dev2, BTN_RIGHT, right); + input_report_key(dev2, BTN_MIDDLE, middle); + + input_sync(dev2); +} + +static void alps_process_touchpad_packet_v7(struct psmouse *psmouse) +{ + struct alps_data *priv = psmouse->private; + struct input_dev *dev = psmouse->dev; + struct alps_fields *f = &priv->f; + + memset(f, 0, sizeof(*f)); + + if (priv->decode_fields(f, psmouse->packet, psmouse)) + return; + + alps_report_mt_data(psmouse, alps_get_mt_count(f->mt)); + + input_mt_report_finger_count(dev, f->fingers); + + input_report_key(dev, BTN_LEFT, f->left); + input_report_key(dev, BTN_RIGHT, f->right); + input_report_key(dev, BTN_MIDDLE, f->middle); input_sync(dev); } +static void alps_process_packet_v7(struct psmouse *psmouse) +{ + unsigned char *packet = psmouse->packet; + + if (packet[0] == 0x48 && (packet[4] & 0x47) == 0x06) + alps_process_trackstick_packet_v7(psmouse); + else + alps_process_touchpad_packet_v7(psmouse); +} + static void alps_report_bare_ps2_packet(struct psmouse *psmouse, unsigned char packet[], bool report_buttons) @@ -1080,6 +1189,14 @@ static psmouse_ret_t alps_process_byte(struct psmouse *psmouse) return PSMOUSE_BAD_DATA; } + if (priv->proto_version == ALPS_PROTO_V7 && + !alps_is_valid_package_v7(psmouse)) { + psmouse_dbg(psmouse, "refusing packet[%i] = %x\n", + psmouse->pktcnt - 1, + psmouse->packet[psmouse->pktcnt - 1]); + return PSMOUSE_BAD_DATA; + } + if (psmouse->pktcnt == psmouse->pktsize) { priv->process_packet(psmouse); return PSMOUSE_FULL_PACKET; @@ -1192,6 +1309,22 @@ static int alps_rpt_cmd(struct psmouse *psmouse, int init_command, return 0; } +static bool alps_check_valid_firmware_id(unsigned char id[]) +{ + if (id[0] == 0x73) + return true; + + if (id[0] == 0x88 && + (id[1] == 0x07 || + id[1] == 0x08 || + (id[1] & 0xf0) == 0xb0 || + (id[1] & 0xf0) == 0xc0)) { + return true; + } + + return false; +} + static int alps_enter_command_mode(struct psmouse *psmouse) { unsigned char param[4]; @@ -1201,8 +1334,7 @@ static int alps_enter_command_mode(struct psmouse *psmouse) return -1; } - if ((param[0] != 0x88 || (param[1] != 0x07 && param[1] != 0x08)) && - param[0] != 0x73) { + if (!alps_check_valid_firmware_id(param)) { psmouse_dbg(psmouse, "unknown response while entering command mode\n"); return -1; @@ -1660,6 +1792,45 @@ error: return -1; } +static int alps_get_v3_v7_resolution(struct psmouse *psmouse, int reg_pitch) +{ + int reg, x_pitch, y_pitch, x_electrode, y_electrode, x_phys, y_phys; + struct alps_data *priv = psmouse->private; + + reg = alps_command_mode_read_reg(psmouse, reg_pitch); + if (reg < 0) + return reg; + + x_pitch = (char)(reg << 4) >> 4; /* sign extend lower 4 bits */ + x_pitch = 50 + 2 * x_pitch; /* In 0.1 mm units */ + + y_pitch = (char)reg >> 4; /* sign extend upper 4 bits */ + y_pitch = 36 + 2 * y_pitch; /* In 0.1 mm units */ + + reg = alps_command_mode_read_reg(psmouse, reg_pitch + 1); + if (reg < 0) + return reg; + + x_electrode = (char)(reg << 4) >> 4; /* sign extend lower 4 bits */ + x_electrode = 17 + x_electrode; + + y_electrode = (char)reg >> 4; /* sign extend upper 4 bits */ + y_electrode = 13 + y_electrode; + + x_phys = x_pitch * (x_electrode - 1); /* In 0.1 mm units */ + y_phys = y_pitch * (y_electrode - 1); /* In 0.1 mm units */ + + priv->x_res = priv->x_max * 10 / x_phys; /* units / mm */ + priv->y_res = priv->y_max * 10 / y_phys; /* units / mm */ + + psmouse_dbg(psmouse, + "pitch %dx%d num-electrodes %dx%d physical size %dx%d mm res %dx%d\n", + x_pitch, y_pitch, x_electrode, y_electrode, + x_phys / 10, y_phys / 10, priv->x_res, priv->y_res); + + return 0; +} + static int alps_hw_init_rushmore_v3(struct psmouse *psmouse) { struct alps_data *priv = psmouse->private; @@ -1680,6 +1851,9 @@ static int alps_hw_init_rushmore_v3(struct psmouse *psmouse) alps_command_mode_write_reg(psmouse, 0xc2cb, 0x00)) goto error; + if (alps_get_v3_v7_resolution(psmouse, 0xc2da)) + goto error; + reg_val = alps_command_mode_read_reg(psmouse, 0xc2c6); if (reg_val == -1) goto error; @@ -1856,6 +2030,35 @@ static int alps_hw_init_dolphin_v1(struct psmouse *psmouse) return 0; } +static int alps_hw_init_v7(struct psmouse *psmouse) +{ + struct ps2dev *ps2dev = &psmouse->ps2dev; + int reg_val, ret = -1; + + if (alps_enter_command_mode(psmouse) || + alps_command_mode_read_reg(psmouse, 0xc2d9) == -1) + goto error; + + if (alps_get_v3_v7_resolution(psmouse, 0xc397)) + goto error; + + if (alps_command_mode_write_reg(psmouse, 0xc2c9, 0x64)) + goto error; + + reg_val = alps_command_mode_read_reg(psmouse, 0xc2c4); + if (reg_val == -1) + goto error; + if (__alps_command_mode_write_reg(psmouse, reg_val | 0x02)) + goto error; + + alps_exit_command_mode(psmouse); + return ps2_command(ps2dev, NULL, PSMOUSE_CMD_ENABLE); + +error: + alps_exit_command_mode(psmouse); + return ret; +} + static void alps_set_defaults(struct alps_data *priv) { priv->byte0 = 0x8f; @@ -1914,6 +2117,21 @@ static void alps_set_defaults(struct alps_data *priv) priv->x_max = 2047; priv->y_max = 1535; break; + case ALPS_PROTO_V7: + priv->hw_init = alps_hw_init_v7; + priv->process_packet = alps_process_packet_v7; + priv->decode_fields = alps_decode_packet_v7; + priv->set_abs_params = alps_set_abs_params_mt; + priv->nibble_commands = alps_v3_nibble_commands; + priv->addr_command = PSMOUSE_CMD_RESET_WRAP; + priv->x_max = 0xfff; + priv->y_max = 0x7ff; + priv->byte0 = 0x48; + priv->mask0 = 0x48; + + if (priv->fw_ver[1] != 0xba) + priv->flags |= ALPS_BUTTONPAD; + break; } } @@ -1972,6 +2190,9 @@ static int alps_identify(struct psmouse *psmouse, struct alps_data *priv) alps_exit_command_mode(psmouse)) return -EIO; + /* Save the Firmware version */ + memcpy(priv->fw_ver, ec, 3); + if (alps_match_table(psmouse, priv, e7, ec) == 0) { return 0; } else if (e7[0] == 0x73 && e7[1] == 0x03 && e7[2] == 0x50 && @@ -1982,6 +2203,12 @@ static int alps_identify(struct psmouse *psmouse, struct alps_data *priv) return -EIO; else return 0; + } else if (ec[0] == 0x88 && + ((ec[1] & 0xf0) == 0xb0 || (ec[1] & 0xf0) == 0xc0)) { + priv->proto_version = ALPS_PROTO_V7; + alps_set_defaults(priv); + + return 0; } else if (ec[0] == 0x88 && ec[1] == 0x08) { priv->proto_version = ALPS_PROTO_V3; alps_set_defaults(priv); @@ -1990,6 +2217,7 @@ static int alps_identify(struct psmouse *psmouse, struct alps_data *priv) priv->decode_fields = alps_decode_rushmore; priv->x_bits = 16; priv->y_bits = 12; + priv->flags |= ALPS_IS_RUSHMORE; /* hack to make addr_command, nibble_command available */ psmouse->private = priv; @@ -2044,17 +2272,21 @@ static void alps_set_abs_params_st(struct alps_data *priv, static void alps_set_abs_params_mt(struct alps_data *priv, struct input_dev *dev1) { - set_bit(INPUT_PROP_SEMI_MT, dev1->propbit); - input_mt_init_slots(dev1, 2, 0); input_set_abs_params(dev1, ABS_MT_POSITION_X, 0, priv->x_max, 0, 0); input_set_abs_params(dev1, ABS_MT_POSITION_Y, 0, priv->y_max, 0, 0); - set_bit(BTN_TOOL_DOUBLETAP, dev1->keybit); + input_abs_set_res(dev1, ABS_MT_POSITION_X, priv->x_res); + input_abs_set_res(dev1, ABS_MT_POSITION_Y, priv->y_res); + + input_mt_init_slots(dev1, MAX_TOUCHES, INPUT_MT_POINTER | + INPUT_MT_DROP_UNUSED | INPUT_MT_TRACK | INPUT_MT_SEMI_MT); + set_bit(BTN_TOOL_TRIPLETAP, dev1->keybit); set_bit(BTN_TOOL_QUADTAP, dev1->keybit); - input_set_abs_params(dev1, ABS_X, 0, priv->x_max, 0, 0); - input_set_abs_params(dev1, ABS_Y, 0, priv->y_max, 0, 0); + /* V7 is real multi-touch */ + if (priv->proto_version == ALPS_PROTO_V7) + clear_bit(INPUT_PROP_SEMI_MT, dev1->propbit); } int alps_init(struct psmouse *psmouse) @@ -2100,7 +2332,9 @@ int alps_init(struct psmouse *psmouse) dev1->evbit[BIT_WORD(EV_ABS)] |= BIT_MASK(EV_ABS); priv->set_abs_params(priv, dev1); - input_set_abs_params(dev1, ABS_PRESSURE, 0, 127, 0, 0); + /* No pressure on V7 */ + if (priv->proto_version != ALPS_PROTO_V7) + input_set_abs_params(dev1, ABS_PRESSURE, 0, 127, 0, 0); if (priv->flags & ALPS_WHEEL) { dev1->evbit[BIT_WORD(EV_REL)] |= BIT_MASK(EV_REL); @@ -2117,6 +2351,9 @@ int alps_init(struct psmouse *psmouse) dev1->keybit[BIT_WORD(BTN_1)] |= BIT_MASK(BTN_1); dev1->keybit[BIT_WORD(BTN_2)] |= BIT_MASK(BTN_2); dev1->keybit[BIT_WORD(BTN_3)] |= BIT_MASK(BTN_3); + } else if (priv->flags & ALPS_BUTTONPAD) { + set_bit(INPUT_PROP_BUTTONPAD, dev1->propbit); + clear_bit(BTN_RIGHT, dev1->keybit); } else { dev1->keybit[BIT_WORD(BTN_MIDDLE)] |= BIT_MASK(BTN_MIDDLE); } diff --git a/drivers/input/mouse/alps.h b/drivers/input/mouse/alps.h index 03f88b6940c7..66240b47819a 100644 --- a/drivers/input/mouse/alps.h +++ b/drivers/input/mouse/alps.h @@ -12,17 +12,39 @@ #ifndef _ALPS_H #define _ALPS_H +#include <linux/input/mt.h> + #define ALPS_PROTO_V1 1 #define ALPS_PROTO_V2 2 #define ALPS_PROTO_V3 3 #define ALPS_PROTO_V4 4 #define ALPS_PROTO_V5 5 #define ALPS_PROTO_V6 6 +#define ALPS_PROTO_V7 7 /* t3btl t4s */ + +#define MAX_TOUCHES 2 #define DOLPHIN_COUNT_PER_ELECTRODE 64 #define DOLPHIN_PROFILE_XOFFSET 8 /* x-electrode offset */ #define DOLPHIN_PROFILE_YOFFSET 1 /* y-electrode offset */ +/* + * enum V7_PACKET_ID - defines the packet type for V7 + * V7_PACKET_ID_IDLE: There's no finger and no button activity. + * V7_PACKET_ID_TWO: There's one or two non-resting fingers on touchpad + * or there's button activities. + * V7_PACKET_ID_MULTI: There are at least three non-resting fingers. + * V7_PACKET_ID_NEW: The finger position in slot is not continues from + * previous packet. +*/ +enum V7_PACKET_ID { + V7_PACKET_ID_IDLE, + V7_PACKET_ID_TWO, + V7_PACKET_ID_MULTI, + V7_PACKET_ID_NEW, + V7_PACKET_ID_UNKNOWN, +}; + /** * struct alps_model_info - touchpad ID table * @signature: E7 response string to match. @@ -46,7 +68,7 @@ struct alps_model_info { unsigned char command_mode_resp; unsigned char proto_version; unsigned char byte0, mask0; - unsigned char flags; + int flags; }; /** @@ -65,14 +87,19 @@ struct alps_nibble_commands { unsigned char data; }; +struct alps_bitmap_point { + int start_bit; + int num_bits; +}; + /** * struct alps_fields - decoded version of the report packet * @x_map: Bitmap of active X positions for MT. * @y_map: Bitmap of active Y positions for MT. * @fingers: Number of fingers for MT. - * @x: X position for ST. - * @y: Y position for ST. - * @z: Z position for ST. + * @pressure: Pressure. + * @st: position for ST. + * @mt: position for MT. * @first_mp: Packet is the first of a multi-packet report. * @is_mp: Packet is part of a multi-packet report. * @left: Left touchpad button is active. @@ -86,9 +113,11 @@ struct alps_fields { unsigned int x_map; unsigned int y_map; unsigned int fingers; - unsigned int x; - unsigned int y; - unsigned int z; + + int pressure; + struct input_mt_pos st; + struct input_mt_pos mt[MAX_TOUCHES]; + unsigned int first_mp:1; unsigned int is_mp:1; @@ -113,6 +142,7 @@ struct alps_fields { * known format for this model. The first byte of the report, ANDed with * mask0, should match byte0. * @mask0: The mask used to check the first byte of the report. + * @fw_ver: cached copy of firmware version (EC report) * @flags: Additional device capabilities (passthrough port, trackstick, etc.). * @x_max: Largest possible X position value. * @y_max: Largest possible Y position value. @@ -125,11 +155,7 @@ struct alps_fields { * @prev_fin: Finger bit from previous packet. * @multi_packet: Multi-packet data in progress. * @multi_data: Saved multi-packet data. - * @x1: First X coordinate from last MT report. - * @x2: Second X coordinate from last MT report. - * @y1: First Y coordinate from last MT report. - * @y2: Second Y coordinate from last MT report. - * @fingers: Number of fingers from last MT report. + * @f: Decoded packet data fields. * @quirks: Bitmap of ALPS_QUIRK_*. * @timer: Timer for flushing out the final report packet in the stream. */ @@ -142,23 +168,25 @@ struct alps_data { int addr_command; unsigned char proto_version; unsigned char byte0, mask0; - unsigned char flags; + unsigned char fw_ver[3]; + int flags; int x_max; int y_max; int x_bits; int y_bits; + unsigned int x_res; + unsigned int y_res; int (*hw_init)(struct psmouse *psmouse); void (*process_packet)(struct psmouse *psmouse); - void (*decode_fields)(struct alps_fields *f, unsigned char *p, + int (*decode_fields)(struct alps_fields *f, unsigned char *p, struct psmouse *psmouse); void (*set_abs_params)(struct alps_data *priv, struct input_dev *dev1); int prev_fin; int multi_packet; unsigned char multi_data[6]; - int x1, x2, y1, y2; - int fingers; + struct alps_fields f; u8 quirks; struct timer_list timer; }; diff --git a/drivers/input/serio/hyperv-keyboard.c b/drivers/input/serio/hyperv-keyboard.c index 613261994621..e74e5d6e5f9f 100644 --- a/drivers/input/serio/hyperv-keyboard.c +++ b/drivers/input/serio/hyperv-keyboard.c @@ -170,6 +170,15 @@ static void hv_kbd_on_receive(struct hv_device *hv_dev, serio_interrupt(kbd_dev->hv_serio, scan_code, 0); } spin_unlock_irqrestore(&kbd_dev->lock, flags); + + /* + * Only trigger a wakeup on key down, otherwise + * "echo freeze > /sys/power/state" can't really enter the + * state because the Enter-UP can trigger a wakeup at once. + */ + if (!(info & IS_BREAK)) + pm_wakeup_event(&hv_dev->device, 0); + break; default: @@ -376,6 +385,9 @@ static int hv_kbd_probe(struct hv_device *hv_dev, goto err_close_vmbus; serio_register_port(kbd_dev->hv_serio); + + device_init_wakeup(&hv_dev->device, true); + return 0; err_close_vmbus: @@ -390,6 +402,7 @@ static int hv_kbd_remove(struct hv_device *hv_dev) { struct hv_kbd_dev *kbd_dev = hv_get_drvdata(hv_dev); + device_init_wakeup(&hv_dev->device, false); serio_unregister_port(kbd_dev->hv_serio); vmbus_close(hv_dev->channel); kfree(kbd_dev); diff --git a/drivers/input/tablet/Kconfig b/drivers/input/tablet/Kconfig index cd9c79e0a11b..623bb9e0d5a4 100644 --- a/drivers/input/tablet/Kconfig +++ b/drivers/input/tablet/Kconfig @@ -73,4 +73,14 @@ config TABLET_USB_KBTAB To compile this driver as a module, choose M here: the module will be called kbtab. +config TABLET_SERIAL_WACOM4 + tristate "Wacom protocol 4 serial tablet support" + select SERIO + help + Say Y here if you want to use Wacom protocol 4 serial tablets. + E.g. serial versions of the Cintiq, Graphire or Penpartner. + + To compile this driver as a module, choose M here: the + module will be called wacom_serial4. + endif diff --git a/drivers/input/tablet/Makefile b/drivers/input/tablet/Makefile index cc3bc17d5b08..2e130101cf3c 100644 --- a/drivers/input/tablet/Makefile +++ b/drivers/input/tablet/Makefile @@ -8,3 +8,4 @@ obj-$(CONFIG_TABLET_USB_AIPTEK) += aiptek.o obj-$(CONFIG_TABLET_USB_GTCO) += gtco.o obj-$(CONFIG_TABLET_USB_HANWANG) += hanwang.o obj-$(CONFIG_TABLET_USB_KBTAB) += kbtab.o +obj-$(CONFIG_TABLET_SERIAL_WACOM4) += wacom_serial4.o diff --git a/drivers/input/tablet/wacom_serial4.c b/drivers/input/tablet/wacom_serial4.c new file mode 100644 index 000000000000..20ab802461e7 --- /dev/null +++ b/drivers/input/tablet/wacom_serial4.c @@ -0,0 +1,620 @@ +/* + * Wacom protocol 4 serial tablet driver + * + * Copyright 2014 Hans de Goede <hdegoede@redhat.com> + * Copyright 2011-2012 Julian Squires <julian@cipht.net> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version of 2 of the License, or (at your + * option) any later version. See the file COPYING in the main directory of + * this archive for more details. + * + * Many thanks to Bill Seremetis, without whom PenPartner support + * would not have been possible. Thanks to Patrick Mahoney. + * + * This driver was developed with reference to much code written by others, + * particularly: + * - elo, gunze drivers by Vojtech Pavlik <vojtech@ucw.cz>; + * - wacom_w8001 driver by Jaya Kumar <jayakumar.lkml@gmail.com>; + * - the USB wacom input driver, credited to many people + * (see drivers/input/tablet/wacom.h); + * - new and old versions of linuxwacom / xf86-input-wacom credited to + * Frederic Lepied, France. <Lepied@XFree86.org> and + * Ping Cheng, Wacom. <pingc@wacom.com>; + * - and xf86wacom.c (a presumably ancient version of the linuxwacom code), + * by Frederic Lepied and Raph Levien <raph@gtk.org>. + * + * To do: + * - support pad buttons; (requires access to a model with pad buttons) + * - support (protocol 4-style) tilt (requires access to a > 1.4 rom model) + */ + +/* + * Wacom serial protocol 4 documentation taken from linuxwacom-0.9.9 code, + * protocol 4 uses 7 or 9 byte of data in the following format: + * + * Byte 1 + * bit 7 Sync bit always 1 + * bit 6 Pointing device detected + * bit 5 Cursor = 0 / Stylus = 1 + * bit 4 Reserved + * bit 3 1 if a button on the pointing device has been pressed + * bit 2 P0 (optional) + * bit 1 X15 + * bit 0 X14 + * + * Byte 2 + * bit 7 Always 0 + * bits 6-0 = X13 - X7 + * + * Byte 3 + * bit 7 Always 0 + * bits 6-0 = X6 - X0 + * + * Byte 4 + * bit 7 Always 0 + * bit 6 B3 + * bit 5 B2 + * bit 4 B1 + * bit 3 B0 + * bit 2 P1 (optional) + * bit 1 Y15 + * bit 0 Y14 + * + * Byte 5 + * bit 7 Always 0 + * bits 6-0 = Y13 - Y7 + * + * Byte 6 + * bit 7 Always 0 + * bits 6-0 = Y6 - Y0 + * + * Byte 7 + * bit 7 Always 0 + * bit 6 Sign of pressure data; or wheel-rel for cursor tool + * bit 5 P7; or REL1 for cursor tool + * bit 4 P6; or REL0 for cursor tool + * bit 3 P5 + * bit 2 P4 + * bit 1 P3 + * bit 0 P2 + * + * byte 8 and 9 are optional and present only + * in tilt mode. + * + * Byte 8 + * bit 7 Always 0 + * bit 6 Sign of tilt X + * bit 5 Xt6 + * bit 4 Xt5 + * bit 3 Xt4 + * bit 2 Xt3 + * bit 1 Xt2 + * bit 0 Xt1 + * + * Byte 9 + * bit 7 Always 0 + * bit 6 Sign of tilt Y + * bit 5 Yt6 + * bit 4 Yt5 + * bit 3 Yt4 + * bit 2 Yt3 + * bit 1 Yt2 + * bit 0 Yt1 + */ + +#include <linux/completion.h> +#include <linux/init.h> +#include <linux/input.h> +#include <linux/interrupt.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/serio.h> +#include <linux/slab.h> +#include <linux/string.h> + +MODULE_AUTHOR("Julian Squires <julian@cipht.net>, Hans de Goede <hdegoede@redhat.com>"); +MODULE_DESCRIPTION("Wacom protocol 4 serial tablet driver"); +MODULE_LICENSE("GPL"); + +#define REQUEST_MODEL_AND_ROM_VERSION "~#" +#define REQUEST_MAX_COORDINATES "~C\r" +#define REQUEST_CONFIGURATION_STRING "~R\r" +#define REQUEST_RESET_TO_PROTOCOL_IV "\r#" +/* + * Note: sending "\r$\r" causes at least the Digitizer II to send + * packets in ASCII instead of binary. "\r#" seems to undo that. + */ + +#define COMMAND_START_SENDING_PACKETS "ST\r" +#define COMMAND_STOP_SENDING_PACKETS "SP\r" +#define COMMAND_MULTI_MODE_INPUT "MU1\r" +#define COMMAND_ORIGIN_IN_UPPER_LEFT "OC1\r" +#define COMMAND_ENABLE_ALL_MACRO_BUTTONS "~M0\r" +#define COMMAND_DISABLE_GROUP_1_MACRO_BUTTONS "~M1\r" +#define COMMAND_TRANSMIT_AT_MAX_RATE "IT0\r" +#define COMMAND_DISABLE_INCREMENTAL_MODE "IN0\r" +#define COMMAND_ENABLE_CONTINUOUS_MODE "SR\r" +#define COMMAND_ENABLE_PRESSURE_MODE "PH1\r" +#define COMMAND_Z_FILTER "ZF1\r" + +/* Note that this is a protocol 4 packet without tilt information. */ +#define PACKET_LENGTH 7 +#define DATA_SIZE 32 + +/* flags */ +#define F_COVERS_SCREEN 0x01 +#define F_HAS_STYLUS2 0x02 +#define F_HAS_SCROLLWHEEL 0x04 + +/* device IDs */ +#define STYLUS_DEVICE_ID 0x02 +#define CURSOR_DEVICE_ID 0x06 +#define ERASER_DEVICE_ID 0x0A + +enum { STYLUS = 1, ERASER, CURSOR }; + +static const struct { + int device_id; + int input_id; +} tools[] = { + { 0, 0 }, + { STYLUS_DEVICE_ID, BTN_TOOL_PEN }, + { ERASER_DEVICE_ID, BTN_TOOL_RUBBER }, + { CURSOR_DEVICE_ID, BTN_TOOL_MOUSE }, +}; + +struct wacom { + struct input_dev *dev; + struct completion cmd_done; + int result; + u8 expect; + u8 eraser_mask; + unsigned int extra_z_bits; + unsigned int flags; + unsigned int res_x, res_y; + unsigned int max_x, max_y; + unsigned int tool; + unsigned int idx; + u8 data[DATA_SIZE]; + char phys[32]; +}; + +enum { + MODEL_CINTIQ = 0x504C, /* PL */ + MODEL_CINTIQ2 = 0x4454, /* DT */ + MODEL_DIGITIZER_II = 0x5544, /* UD */ + MODEL_GRAPHIRE = 0x4554, /* ET */ + MODEL_PENPARTNER = 0x4354, /* CT */ +}; + +static void wacom_handle_model_response(struct wacom *wacom) +{ + int major_v, minor_v, r = 0; + char *p; + + p = strrchr(wacom->data, 'V'); + if (p) + r = sscanf(p + 1, "%u.%u", &major_v, &minor_v); + if (r != 2) + major_v = minor_v = 0; + + switch (wacom->data[2] << 8 | wacom->data[3]) { + case MODEL_CINTIQ: /* UNTESTED */ + case MODEL_CINTIQ2: + if ((wacom->data[2] << 8 | wacom->data[3]) == MODEL_CINTIQ) { + wacom->dev->name = "Wacom Cintiq"; + wacom->dev->id.version = MODEL_CINTIQ; + } else { + wacom->dev->name = "Wacom Cintiq II"; + wacom->dev->id.version = MODEL_CINTIQ2; + } + wacom->res_x = 508; + wacom->res_y = 508; + + switch (wacom->data[5] << 8 | wacom->data[6]) { + case 0x3731: /* PL-710 */ + wacom->res_x = 2540; + wacom->res_y = 2540; + /* fall through */ + case 0x3535: /* PL-550 */ + case 0x3830: /* PL-800 */ + wacom->extra_z_bits = 2; + } + + wacom->flags = F_COVERS_SCREEN; + break; + + case MODEL_PENPARTNER: + wacom->dev->name = "Wacom Penpartner"; + wacom->dev->id.version = MODEL_PENPARTNER; + wacom->res_x = 1000; + wacom->res_y = 1000; + break; + + case MODEL_GRAPHIRE: + wacom->dev->name = "Wacom Graphire"; + wacom->dev->id.version = MODEL_GRAPHIRE; + wacom->res_x = 1016; + wacom->res_y = 1016; + wacom->max_x = 5103; + wacom->max_y = 3711; + wacom->extra_z_bits = 2; + wacom->eraser_mask = 0x08; + wacom->flags = F_HAS_STYLUS2 | F_HAS_SCROLLWHEEL; + break; + + case MODEL_DIGITIZER_II: + wacom->dev->name = "Wacom Digitizer II"; + wacom->dev->id.version = MODEL_DIGITIZER_II; + if (major_v == 1 && minor_v <= 2) + wacom->extra_z_bits = 0; /* UNTESTED */ + break; + + default: + dev_err(&wacom->dev->dev, "Unsupported Wacom model %s\n", + wacom->data); + wacom->result = -ENODEV; + return; + } + + dev_info(&wacom->dev->dev, "%s tablet, version %u.%u\n", + wacom->dev->name, major_v, minor_v); +} + +static void wacom_handle_configuration_response(struct wacom *wacom) +{ + int r, skip; + + dev_dbg(&wacom->dev->dev, "Configuration string: %s\n", wacom->data); + r = sscanf(wacom->data, "~R%x,%u,%u,%u,%u", &skip, &skip, &skip, + &wacom->res_x, &wacom->res_y); + if (r != 5) + dev_warn(&wacom->dev->dev, "could not get resolution\n"); +} + +static void wacom_handle_coordinates_response(struct wacom *wacom) +{ + int r; + + dev_dbg(&wacom->dev->dev, "Coordinates string: %s\n", wacom->data); + r = sscanf(wacom->data, "~C%u,%u", &wacom->max_x, &wacom->max_y); + if (r != 2) + dev_warn(&wacom->dev->dev, "could not get max coordinates\n"); +} + +static void wacom_handle_response(struct wacom *wacom) +{ + if (wacom->data[0] != '~' || wacom->data[1] != wacom->expect) { + dev_err(&wacom->dev->dev, + "Wacom got an unexpected response: %s\n", wacom->data); + wacom->result = -EIO; + } else { + wacom->result = 0; + + switch (wacom->data[1]) { + case '#': + wacom_handle_model_response(wacom); + break; + case 'R': + wacom_handle_configuration_response(wacom); + break; + case 'C': + wacom_handle_coordinates_response(wacom); + break; + } + } + + complete(&wacom->cmd_done); +} + +static void wacom_handle_packet(struct wacom *wacom) +{ + u8 in_proximity_p, stylus_p, button; + unsigned int tool; + int x, y, z; + + in_proximity_p = wacom->data[0] & 0x40; + stylus_p = wacom->data[0] & 0x20; + button = (wacom->data[3] & 0x78) >> 3; + x = (wacom->data[0] & 3) << 14 | wacom->data[1]<<7 | wacom->data[2]; + y = (wacom->data[3] & 3) << 14 | wacom->data[4]<<7 | wacom->data[5]; + + if (in_proximity_p && stylus_p) { + z = wacom->data[6] & 0x7f; + if (wacom->extra_z_bits >= 1) + z = z << 1 | (wacom->data[3] & 0x4) >> 2; + if (wacom->extra_z_bits > 1) + z = z << 1 | (wacom->data[0] & 0x4) >> 2; + z = z ^ (0x40 << wacom->extra_z_bits); + } else { + z = -1; + } + + if (stylus_p) + tool = (button & wacom->eraser_mask) ? ERASER : STYLUS; + else + tool = CURSOR; + + if (tool != wacom->tool && wacom->tool != 0) { + input_report_key(wacom->dev, tools[wacom->tool].input_id, 0); + input_sync(wacom->dev); + } + wacom->tool = tool; + + input_report_key(wacom->dev, tools[tool].input_id, in_proximity_p); + input_report_abs(wacom->dev, ABS_MISC, + in_proximity_p ? tools[tool].device_id : 0); + input_report_abs(wacom->dev, ABS_X, x); + input_report_abs(wacom->dev, ABS_Y, y); + input_report_abs(wacom->dev, ABS_PRESSURE, z); + if (stylus_p) { + input_report_key(wacom->dev, BTN_TOUCH, button & 1); + input_report_key(wacom->dev, BTN_STYLUS, button & 2); + input_report_key(wacom->dev, BTN_STYLUS2, button & 4); + } else { + input_report_key(wacom->dev, BTN_LEFT, button & 1); + input_report_key(wacom->dev, BTN_RIGHT, button & 2); + input_report_key(wacom->dev, BTN_MIDDLE, button & 4); + /* handle relative wheel for non-stylus device */ + z = (wacom->data[6] & 0x30) >> 4; + if (wacom->data[6] & 0x40) + z = -z; + input_report_rel(wacom->dev, REL_WHEEL, z); + } + input_sync(wacom->dev); +} + +static void wacom_clear_data_buf(struct wacom *wacom) +{ + memset(wacom->data, 0, DATA_SIZE); + wacom->idx = 0; +} + +static irqreturn_t wacom_interrupt(struct serio *serio, unsigned char data, + unsigned int flags) +{ + struct wacom *wacom = serio_get_drvdata(serio); + + if (data & 0x80) + wacom->idx = 0; + + /* + * We're either expecting a carriage return-terminated ASCII + * response string, or a seven-byte packet with the MSB set on + * the first byte. + * + * Note however that some tablets (the PenPartner, for + * example) don't send a carriage return at the end of a + * command. We handle these by waiting for timeout. + */ + if (data == '\r' && !(wacom->data[0] & 0x80)) { + wacom_handle_response(wacom); + wacom_clear_data_buf(wacom); + return IRQ_HANDLED; + } + + /* Leave place for 0 termination */ + if (wacom->idx > (DATA_SIZE - 2)) { + dev_dbg(&wacom->dev->dev, + "throwing away %d bytes of garbage\n", wacom->idx); + wacom_clear_data_buf(wacom); + } + wacom->data[wacom->idx++] = data; + + if (wacom->idx == PACKET_LENGTH && (wacom->data[0] & 0x80)) { + wacom_handle_packet(wacom); + wacom_clear_data_buf(wacom); + } + + return IRQ_HANDLED; +} + +static void wacom_disconnect(struct serio *serio) +{ + struct wacom *wacom = serio_get_drvdata(serio); + + serio_close(serio); + serio_set_drvdata(serio, NULL); + input_unregister_device(wacom->dev); + kfree(wacom); +} + +static int wacom_send(struct serio *serio, const u8 *command) +{ + int err = 0; + + for (; !err && *command; command++) + err = serio_write(serio, *command); + + return err; +} + +static int wacom_send_setup_string(struct wacom *wacom, struct serio *serio) +{ + const u8 *cmd; + + switch (wacom->dev->id.version) { + case MODEL_CINTIQ: /* UNTESTED */ + cmd = COMMAND_ORIGIN_IN_UPPER_LEFT + COMMAND_TRANSMIT_AT_MAX_RATE + COMMAND_ENABLE_CONTINUOUS_MODE + COMMAND_START_SENDING_PACKETS; + break; + + case MODEL_PENPARTNER: + cmd = COMMAND_ENABLE_PRESSURE_MODE + COMMAND_START_SENDING_PACKETS; + break; + + default: + cmd = COMMAND_MULTI_MODE_INPUT + COMMAND_ORIGIN_IN_UPPER_LEFT + COMMAND_ENABLE_ALL_MACRO_BUTTONS + COMMAND_DISABLE_GROUP_1_MACRO_BUTTONS + COMMAND_TRANSMIT_AT_MAX_RATE + COMMAND_DISABLE_INCREMENTAL_MODE + COMMAND_ENABLE_CONTINUOUS_MODE + COMMAND_Z_FILTER + COMMAND_START_SENDING_PACKETS; + break; + } + + return wacom_send(serio, cmd); +} + +static int wacom_send_and_wait(struct wacom *wacom, struct serio *serio, + const u8 *cmd, const char *desc) +{ + int err; + unsigned long u; + + wacom->expect = cmd[1]; + init_completion(&wacom->cmd_done); + + err = wacom_send(serio, cmd); + if (err) + return err; + + u = wait_for_completion_timeout(&wacom->cmd_done, HZ); + if (u == 0) { + /* Timeout, process what we've received. */ + wacom_handle_response(wacom); + } + + wacom->expect = 0; + return wacom->result; +} + +static int wacom_setup(struct wacom *wacom, struct serio *serio) +{ + int err; + + /* Note that setting the link speed is the job of inputattach. + * We assume that reset negotiation has already happened, + * here. */ + err = wacom_send_and_wait(wacom, serio, REQUEST_MODEL_AND_ROM_VERSION, + "model and version"); + if (err) + return err; + + if (!(wacom->res_x && wacom->res_y)) { + err = wacom_send_and_wait(wacom, serio, + REQUEST_CONFIGURATION_STRING, + "configuration string"); + if (err) + return err; + } + + if (!(wacom->max_x && wacom->max_y)) { + err = wacom_send_and_wait(wacom, serio, + REQUEST_MAX_COORDINATES, + "coordinates string"); + if (err) + return err; + } + + return wacom_send_setup_string(wacom, serio); +} + +static int wacom_connect(struct serio *serio, struct serio_driver *drv) +{ + struct wacom *wacom; + struct input_dev *input_dev; + int err = -ENOMEM; + + wacom = kzalloc(sizeof(struct wacom), GFP_KERNEL); + input_dev = input_allocate_device(); + if (!wacom || !input_dev) + goto free_device; + + wacom->dev = input_dev; + wacom->extra_z_bits = 1; + wacom->eraser_mask = 0x04; + wacom->tool = wacom->idx = 0; + snprintf(wacom->phys, sizeof(wacom->phys), "%s/input0", serio->phys); + input_dev->phys = wacom->phys; + input_dev->id.bustype = BUS_RS232; + input_dev->id.vendor = SERIO_WACOM_IV; + input_dev->id.product = serio->id.extra; + input_dev->dev.parent = &serio->dev; + + input_dev->evbit[0] = + BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS) | BIT_MASK(EV_REL); + set_bit(ABS_MISC, input_dev->absbit); + set_bit(BTN_TOOL_PEN, input_dev->keybit); + set_bit(BTN_TOOL_RUBBER, input_dev->keybit); + set_bit(BTN_TOOL_MOUSE, input_dev->keybit); + set_bit(BTN_TOUCH, input_dev->keybit); + set_bit(BTN_STYLUS, input_dev->keybit); + set_bit(BTN_LEFT, input_dev->keybit); + set_bit(BTN_RIGHT, input_dev->keybit); + set_bit(BTN_MIDDLE, input_dev->keybit); + + serio_set_drvdata(serio, wacom); + + err = serio_open(serio, drv); + if (err) + goto free_device; + + err = wacom_setup(wacom, serio); + if (err) + goto close_serio; + + set_bit(INPUT_PROP_DIRECT, input_dev->propbit); + if (!(wacom->flags & F_COVERS_SCREEN)) + __set_bit(INPUT_PROP_POINTER, input_dev->propbit); + + if (wacom->flags & F_HAS_STYLUS2) + __set_bit(BTN_STYLUS2, input_dev->keybit); + + if (wacom->flags & F_HAS_SCROLLWHEEL) + __set_bit(REL_WHEEL, input_dev->relbit); + + input_abs_set_res(wacom->dev, ABS_X, wacom->res_x); + input_abs_set_res(wacom->dev, ABS_Y, wacom->res_y); + input_set_abs_params(wacom->dev, ABS_X, 0, wacom->max_x, 0, 0); + input_set_abs_params(wacom->dev, ABS_Y, 0, wacom->max_y, 0, 0); + input_set_abs_params(wacom->dev, ABS_PRESSURE, -1, + (1 << (7 + wacom->extra_z_bits)) - 1, 0, 0); + + err = input_register_device(wacom->dev); + if (err) + goto close_serio; + + return 0; + +close_serio: + serio_close(serio); +free_device: + serio_set_drvdata(serio, NULL); + input_free_device(input_dev); + kfree(wacom); + return err; +} + +static struct serio_device_id wacom_serio_ids[] = { + { + .type = SERIO_RS232, + .proto = SERIO_WACOM_IV, + .id = SERIO_ANY, + .extra = SERIO_ANY, + }, + { 0 } +}; + +MODULE_DEVICE_TABLE(serio, wacom_serio_ids); + +static struct serio_driver wacom_drv = { + .driver = { + .name = "wacom_serial4", + }, + .description = "Wacom protocol 4 serial tablet driver", + .id_table = wacom_serio_ids, + .interrupt = wacom_interrupt, + .connect = wacom_connect, + .disconnect = wacom_disconnect, +}; + +module_serio_driver(wacom_drv); diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig index a23a94bb4bcb..6bb9a7dd23b6 100644 --- a/drivers/input/touchscreen/Kconfig +++ b/drivers/input/touchscreen/Kconfig @@ -471,6 +471,18 @@ config TOUCHSCREEN_HP7XX To compile this driver as a module, choose M here: the module will be called jornada720_ts. +config TOUCHSCREEN_IPAQ_MICRO + tristate "HP iPAQ Atmel Micro ASIC touchscreen" + depends on MFD_IPAQ_MICRO + help + Say Y here to enable support for the touchscreen attached to + the Atmel Micro peripheral controller on iPAQ h3100/h3600/h3700 + + If unsure, say N. + + To compile this driver as a module, choose M here: the + module will be called ipaq-micro-ts. + config TOUCHSCREEN_HTCPEN tristate "HTC Shift X9500 touchscreen" depends on ISA diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile index 126479d8c29a..4be94fce41af 100644 --- a/drivers/input/touchscreen/Makefile +++ b/drivers/input/touchscreen/Makefile @@ -46,6 +46,7 @@ obj-$(CONFIG_TOUCHSCREEN_MTOUCH) += mtouch.o obj-$(CONFIG_TOUCHSCREEN_MK712) += mk712.o obj-$(CONFIG_TOUCHSCREEN_HP600) += hp680_ts_input.o obj-$(CONFIG_TOUCHSCREEN_HP7XX) += jornada720_ts.o +obj-$(CONFIG_TOUCHSCREEN_IPAQ_MICRO) += ipaq-micro-ts.o obj-$(CONFIG_TOUCHSCREEN_HTCPEN) += htcpen.o obj-$(CONFIG_TOUCHSCREEN_USB_COMPOSITE) += usbtouchscreen.o obj-$(CONFIG_TOUCHSCREEN_PCAP) += pcap_ts.o diff --git a/drivers/input/touchscreen/ads7846.c b/drivers/input/touchscreen/ads7846.c index da201b8e37dc..e57ba52bf484 100644 --- a/drivers/input/touchscreen/ads7846.c +++ b/drivers/input/touchscreen/ads7846.c @@ -1302,8 +1302,10 @@ static int ads7846_probe(struct spi_device *spi) pdata = dev_get_platdata(&spi->dev); if (!pdata) { pdata = ads7846_probe_dt(&spi->dev); - if (IS_ERR(pdata)) - return PTR_ERR(pdata); + if (IS_ERR(pdata)) { + err = PTR_ERR(pdata); + goto err_free_mem; + } } ts->model = pdata->model ? : 7846; diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c index 6e0b4a2120d3..03b85711cb70 100644 --- a/drivers/input/touchscreen/atmel_mxt_ts.c +++ b/drivers/input/touchscreen/atmel_mxt_ts.c @@ -2,6 +2,7 @@ * Atmel maXTouch Touchscreen driver * * Copyright (C) 2010 Samsung Electronics Co.Ltd + * Copyright (C) 2011-2014 Atmel Corporation * Copyright (C) 2012 Google, Inc. * * Author: Joonyoung Shim <jy0922.shim@samsung.com> @@ -22,6 +23,7 @@ #include <linux/i2c/atmel_mxt_ts.h> #include <linux/input/mt.h> #include <linux/interrupt.h> +#include <linux/of.h> #include <linux/slab.h> /* Version */ @@ -29,8 +31,10 @@ #define MXT_VER_21 21 #define MXT_VER_22 22 -/* Firmware */ +/* Firmware files */ #define MXT_FW_NAME "maxtouch.fw" +#define MXT_CFG_NAME "maxtouch.cfg" +#define MXT_CFG_MAGIC "OBP_RAW V1" /* Registers */ #define MXT_INFO 0x00 @@ -44,6 +48,8 @@ #define MXT_OBJECT_START 0x07 #define MXT_OBJECT_SIZE 6 +#define MXT_INFO_CHECKSUM_SIZE 3 +#define MXT_MAX_BLOCK_WRITE 256 /* Object types */ #define MXT_DEBUG_DIAGNOSTIC_T37 37 @@ -74,6 +80,9 @@ #define MXT_SPT_MESSAGECOUNT_T44 44 #define MXT_SPT_CTECONFIG_T46 46 +/* MXT_GEN_MESSAGE_T5 object */ +#define MXT_RPTID_NOMSG 0xff + /* MXT_GEN_COMMAND_T6 field */ #define MXT_COMMAND_RESET 0 #define MXT_COMMAND_BACKUPNV 1 @@ -83,11 +92,20 @@ /* Define for T6 status byte */ #define MXT_T6_STATUS_RESET (1 << 7) +#define MXT_T6_STATUS_OFL (1 << 6) +#define MXT_T6_STATUS_SIGERR (1 << 5) +#define MXT_T6_STATUS_CAL (1 << 4) +#define MXT_T6_STATUS_CFGERR (1 << 3) +#define MXT_T6_STATUS_COMSERR (1 << 2) /* MXT_GEN_POWER_T7 field */ -#define MXT_POWER_IDLEACQINT 0 -#define MXT_POWER_ACTVACQINT 1 -#define MXT_POWER_ACTV2IDLETO 2 +struct t7_config { + u8 idle; + u8 active; +} __packed; + +#define MXT_POWER_CFG_RUN 0 +#define MXT_POWER_CFG_DEEPSLEEP 1 /* MXT_GEN_ACQUIRE_T8 field */ #define MXT_ACQUIRE_CHRGTIME 0 @@ -99,7 +117,6 @@ #define MXT_ACQUIRE_ATCHCALSTHR 7 /* MXT_TOUCH_MULTI_T9 field */ -#define MXT_TOUCH_CTRL 0 #define MXT_T9_ORIENT 9 #define MXT_T9_RANGE 18 @@ -217,11 +234,6 @@ struct mxt_object { u8 num_report_ids; } __packed; -struct mxt_message { - u8 reportid; - u8 message[7]; -}; - /* Each client has this additional data */ struct mxt_data { struct i2c_client *client; @@ -234,15 +246,28 @@ struct mxt_data { unsigned int max_x; unsigned int max_y; bool in_bootloader; + u16 mem_size; + u8 max_reportid; u32 config_crc; + u32 info_crc; u8 bootloader_addr; + u8 *msg_buf; + u8 t6_status; + bool update_input; + u8 last_message_count; + u8 num_touchids; + struct t7_config t7_cfg; /* Cached parameters from object table */ + u16 T5_address; + u8 T5_msg_size; u8 T6_reportid; u16 T6_address; + u16 T7_address; u8 T9_reportid_min; u8 T9_reportid_max; u8 T19_reportid; + u16 T44_address; /* for fw update in bootloader */ struct completion bl_completion; @@ -297,42 +322,10 @@ static bool mxt_object_readable(unsigned int type) } } -static bool mxt_object_writable(unsigned int type) -{ - switch (type) { - case MXT_GEN_COMMAND_T6: - case MXT_GEN_POWER_T7: - case MXT_GEN_ACQUIRE_T8: - case MXT_TOUCH_MULTI_T9: - case MXT_TOUCH_KEYARRAY_T15: - case MXT_TOUCH_PROXIMITY_T23: - case MXT_TOUCH_PROXKEY_T52: - case MXT_PROCI_GRIPFACE_T20: - case MXT_PROCG_NOISE_T22: - case MXT_PROCI_ONETOUCH_T24: - case MXT_PROCI_TWOTOUCH_T27: - case MXT_PROCI_GRIP_T40: - case MXT_PROCI_PALM_T41: - case MXT_PROCI_TOUCHSUPPRESSION_T42: - case MXT_PROCI_STYLUS_T47: - case MXT_PROCG_NOISESUPPRESSION_T48: - case MXT_SPT_COMMSCONFIG_T18: - case MXT_SPT_GPIOPWM_T19: - case MXT_SPT_SELFTEST_T25: - case MXT_SPT_CTECONFIG_T28: - case MXT_SPT_DIGITIZER_T43: - case MXT_SPT_CTECONFIG_T46: - return true; - default: - return false; - } -} - -static void mxt_dump_message(struct device *dev, - struct mxt_message *message) +static void mxt_dump_message(struct mxt_data *data, u8 *message) { - dev_dbg(dev, "reportid: %u\tmessage: %*ph\n", - message->reportid, 7, message->message); + dev_dbg(&data->client->dev, "message: %*ph\n", + data->T5_msg_size, message); } static int mxt_wait_for_completion(struct mxt_data *data, @@ -401,7 +394,7 @@ static int mxt_bootloader_write(struct mxt_data *data, return ret; } -static int mxt_lookup_bootloader_address(struct mxt_data *data) +static int mxt_lookup_bootloader_address(struct mxt_data *data, bool retry) { u8 appmode = data->client->addr; u8 bootloader; @@ -409,6 +402,12 @@ static int mxt_lookup_bootloader_address(struct mxt_data *data) switch (appmode) { case 0x4a: case 0x4b: + /* Chips after 1664S use different scheme */ + if (retry || data->info.family_id >= 0xa2) { + bootloader = appmode - 0x24; + break; + } + /* Fall through for normal case */ case 0x4c: case 0x4d: case 0x5a: @@ -426,6 +425,30 @@ static int mxt_lookup_bootloader_address(struct mxt_data *data) return 0; } +static int mxt_probe_bootloader(struct mxt_data *data, bool retry) +{ + struct device *dev = &data->client->dev; + int ret; + u8 val; + bool crc_failure; + + ret = mxt_lookup_bootloader_address(data, retry); + if (ret) + return ret; + + ret = mxt_bootloader_read(data, &val, 1); + if (ret) + return ret; + + /* Check app crc fail mode */ + crc_failure = (val & ~MXT_BOOT_STATUS_MASK) == MXT_APP_CRC_FAIL; + + dev_err(dev, "Detected bootloader, status:%02X%s\n", + val, crc_failure ? ", APP_CRC_FAIL" : ""); + + return 0; +} + static u8 mxt_get_bootloader_version(struct mxt_data *data, u8 val) { struct device *dev = &data->client->dev; @@ -447,14 +470,15 @@ static u8 mxt_get_bootloader_version(struct mxt_data *data, u8 val) } } -static int mxt_check_bootloader(struct mxt_data *data, unsigned int state) +static int mxt_check_bootloader(struct mxt_data *data, unsigned int state, + bool wait) { struct device *dev = &data->client->dev; u8 val; int ret; recheck: - if (state != MXT_WAITING_BOOTLOAD_CMD) { + if (wait) { /* * In application update mode, the interrupt * line signals state transitions. We must wait for the @@ -485,6 +509,7 @@ recheck: switch (state) { case MXT_WAITING_BOOTLOAD_CMD: case MXT_WAITING_FRAME_DATA: + case MXT_APP_CRC_FAIL: val &= ~MXT_BOOT_STATUS_MASK; break; case MXT_FRAME_CRC_PASS: @@ -508,13 +533,18 @@ recheck: return 0; } -static int mxt_unlock_bootloader(struct mxt_data *data) +static int mxt_send_bootloader_cmd(struct mxt_data *data, bool unlock) { int ret; u8 buf[2]; - buf[0] = MXT_UNLOCK_CMD_LSB; - buf[1] = MXT_UNLOCK_CMD_MSB; + if (unlock) { + buf[0] = MXT_UNLOCK_CMD_LSB; + buf[1] = MXT_UNLOCK_CMD_MSB; + } else { + buf[0] = 0x01; + buf[1] = 0x01; + } ret = mxt_bootloader_write(data, buf, 2); if (ret) @@ -605,40 +635,44 @@ mxt_get_object(struct mxt_data *data, u8 type) return object; } - dev_err(&data->client->dev, "Invalid object type T%u\n", type); + dev_warn(&data->client->dev, "Invalid object type T%u\n", type); return NULL; } -static int mxt_read_message(struct mxt_data *data, - struct mxt_message *message) +static void mxt_proc_t6_messages(struct mxt_data *data, u8 *msg) { - struct mxt_object *object; - u16 reg; - - object = mxt_get_object(data, MXT_GEN_MESSAGE_T5); - if (!object) - return -EINVAL; - - reg = object->start_address; - return __mxt_read_reg(data->client, reg, - sizeof(struct mxt_message), message); -} + struct device *dev = &data->client->dev; + u8 status = msg[1]; + u32 crc = msg[2] | (msg[3] << 8) | (msg[4] << 16); -static int mxt_write_object(struct mxt_data *data, - u8 type, u8 offset, u8 val) -{ - struct mxt_object *object; - u16 reg; + complete(&data->crc_completion); - object = mxt_get_object(data, type); - if (!object || offset >= mxt_obj_size(object)) - return -EINVAL; + if (crc != data->config_crc) { + data->config_crc = crc; + dev_dbg(dev, "T6 Config Checksum: 0x%06X\n", crc); + } - reg = object->start_address; - return mxt_write_reg(data->client, reg + offset, val); + /* Detect reset */ + if (status & MXT_T6_STATUS_RESET) + complete(&data->reset_completion); + + /* Output debug if status has changed */ + if (status != data->t6_status) + dev_dbg(dev, "T6 Status 0x%02X%s%s%s%s%s%s%s\n", + status, + status == 0 ? " OK" : "", + status & MXT_T6_STATUS_RESET ? " RESET" : "", + status & MXT_T6_STATUS_OFL ? " OFL" : "", + status & MXT_T6_STATUS_SIGERR ? " SIGERR" : "", + status & MXT_T6_STATUS_CAL ? " CAL" : "", + status & MXT_T6_STATUS_CFGERR ? " CFGERR" : "", + status & MXT_T6_STATUS_COMSERR ? " COMSERR" : ""); + + /* Save current status */ + data->t6_status = status; } -static void mxt_input_button(struct mxt_data *data, struct mxt_message *message) +static void mxt_input_button(struct mxt_data *data, u8 *message) { struct input_dev *input = data->input_dev; const struct mxt_platform_data *pdata = data->pdata; @@ -649,30 +683,33 @@ static void mxt_input_button(struct mxt_data *data, struct mxt_message *message) for (i = 0; i < pdata->t19_num_keys; i++) { if (pdata->t19_keymap[i] == KEY_RESERVED) continue; - button = !(message->message[0] & (1 << i)); + button = !(message[1] & (1 << i)); input_report_key(input, pdata->t19_keymap[i], button); } } -static void mxt_input_sync(struct input_dev *input_dev) +static void mxt_input_sync(struct mxt_data *data) { - input_mt_report_pointer_emulation(input_dev, false); - input_sync(input_dev); + input_mt_report_pointer_emulation(data->input_dev, + data->pdata->t19_num_keys); + input_sync(data->input_dev); } -static void mxt_input_touchevent(struct mxt_data *data, - struct mxt_message *message, int id) +static void mxt_proc_t9_message(struct mxt_data *data, u8 *message) { struct device *dev = &data->client->dev; - u8 status = message->message[0]; struct input_dev *input_dev = data->input_dev; + int id; + u8 status; int x; int y; int area; int amplitude; - x = (message->message[1] << 4) | ((message->message[3] >> 4) & 0xf); - y = (message->message[2] << 4) | ((message->message[3] & 0xf)); + id = message[0] - data->T9_reportid_min; + status = message[1]; + x = (message[2] << 4) | ((message[4] >> 4) & 0xf); + y = (message[3] << 4) | ((message[4] & 0xf)); /* Handle 10/12 bit switching */ if (data->max_x < 1024) @@ -680,8 +717,8 @@ static void mxt_input_touchevent(struct mxt_data *data, if (data->max_y < 1024) y >>= 2; - area = message->message[4]; - amplitude = message->message[5]; + area = message[5]; + amplitude = message[6]; dev_dbg(dev, "[%u] %c%c%c%c%c%c%c%c x: %5u y: %5u area: %3u amp: %3u\n", @@ -707,7 +744,7 @@ static void mxt_input_touchevent(struct mxt_data *data, if (status & MXT_T9_RELEASE) { input_mt_report_slot_state(input_dev, MT_TOOL_FINGER, 0); - mxt_input_sync(input_dev); + mxt_input_sync(data); } /* Touch active */ @@ -720,64 +757,179 @@ static void mxt_input_touchevent(struct mxt_data *data, /* Touch no longer active, close out slot */ input_mt_report_slot_state(input_dev, MT_TOOL_FINGER, 0); } + + data->update_input = true; +} + +static int mxt_proc_message(struct mxt_data *data, u8 *message) +{ + u8 report_id = message[0]; + + if (report_id == MXT_RPTID_NOMSG) + return 0; + + if (report_id == data->T6_reportid) { + mxt_proc_t6_messages(data, message); + } else if (!data->input_dev) { + /* + * Do not report events if input device + * is not yet registered. + */ + mxt_dump_message(data, message); + } else if (report_id >= data->T9_reportid_min + && report_id <= data->T9_reportid_max) { + mxt_proc_t9_message(data, message); + } else if (report_id == data->T19_reportid) { + mxt_input_button(data, message); + data->update_input = true; + } else { + mxt_dump_message(data, message); + } + + return 1; } -static u16 mxt_extract_T6_csum(const u8 *csum) +static int mxt_read_and_process_messages(struct mxt_data *data, u8 count) { - return csum[0] | (csum[1] << 8) | (csum[2] << 16); + struct device *dev = &data->client->dev; + int ret; + int i; + u8 num_valid = 0; + + /* Safety check for msg_buf */ + if (count > data->max_reportid) + return -EINVAL; + + /* Process remaining messages if necessary */ + ret = __mxt_read_reg(data->client, data->T5_address, + data->T5_msg_size * count, data->msg_buf); + if (ret) { + dev_err(dev, "Failed to read %u messages (%d)\n", count, ret); + return ret; + } + + for (i = 0; i < count; i++) { + ret = mxt_proc_message(data, + data->msg_buf + data->T5_msg_size * i); + + if (ret == 1) + num_valid++; + } + + /* return number of messages read */ + return num_valid; } -static bool mxt_is_T9_message(struct mxt_data *data, struct mxt_message *msg) +static irqreturn_t mxt_process_messages_t44(struct mxt_data *data) { - u8 id = msg->reportid; - return (id >= data->T9_reportid_min && id <= data->T9_reportid_max); + struct device *dev = &data->client->dev; + int ret; + u8 count, num_left; + + /* Read T44 and T5 together */ + ret = __mxt_read_reg(data->client, data->T44_address, + data->T5_msg_size + 1, data->msg_buf); + if (ret) { + dev_err(dev, "Failed to read T44 and T5 (%d)\n", ret); + return IRQ_NONE; + } + + count = data->msg_buf[0]; + + if (count == 0) { + dev_warn(dev, "Interrupt triggered but zero messages\n"); + return IRQ_NONE; + } else if (count > data->max_reportid) { + dev_err(dev, "T44 count %d exceeded max report id\n", count); + count = data->max_reportid; + } + + /* Process first message */ + ret = mxt_proc_message(data, data->msg_buf + 1); + if (ret < 0) { + dev_warn(dev, "Unexpected invalid message\n"); + return IRQ_NONE; + } + + num_left = count - 1; + + /* Process remaining messages if necessary */ + if (num_left) { + ret = mxt_read_and_process_messages(data, num_left); + if (ret < 0) + goto end; + else if (ret != num_left) + dev_warn(dev, "Unexpected invalid message\n"); + } + +end: + if (data->update_input) { + mxt_input_sync(data); + data->update_input = false; + } + + return IRQ_HANDLED; } -static irqreturn_t mxt_process_messages_until_invalid(struct mxt_data *data) +static int mxt_process_messages_until_invalid(struct mxt_data *data) { - struct mxt_message message; - const u8 *payload = &message.message[0]; struct device *dev = &data->client->dev; - u8 reportid; - bool update_input = false; - u32 crc; + int count, read; + u8 tries = 2; + count = data->max_reportid; + + /* Read messages until we force an invalid */ do { - if (mxt_read_message(data, &message)) { - dev_err(dev, "Failed to read message\n"); - return IRQ_NONE; - } + read = mxt_read_and_process_messages(data, count); + if (read < count) + return 0; + } while (--tries); - reportid = message.reportid; + if (data->update_input) { + mxt_input_sync(data); + data->update_input = false; + } - if (reportid == data->T6_reportid) { - u8 status = payload[0]; + dev_err(dev, "CHG pin isn't cleared\n"); + return -EBUSY; +} - crc = mxt_extract_T6_csum(&payload[1]); - if (crc != data->config_crc) { - data->config_crc = crc; - complete(&data->crc_completion); - } +static irqreturn_t mxt_process_messages(struct mxt_data *data) +{ + int total_handled, num_handled; + u8 count = data->last_message_count; - dev_dbg(dev, "Status: %02x Config Checksum: %06x\n", - status, data->config_crc); - - if (status & MXT_T6_STATUS_RESET) - complete(&data->reset_completion); - } else if (mxt_is_T9_message(data, &message)) { - int id = reportid - data->T9_reportid_min; - mxt_input_touchevent(data, &message, id); - update_input = true; - } else if (message.reportid == data->T19_reportid) { - mxt_input_button(data, &message); - update_input = true; - } else { - mxt_dump_message(dev, &message); - } - } while (reportid != 0xff); + if (count < 1 || count > data->max_reportid) + count = 1; - if (update_input) - mxt_input_sync(data->input_dev); + /* include final invalid message */ + total_handled = mxt_read_and_process_messages(data, count + 1); + if (total_handled < 0) + return IRQ_NONE; + /* if there were invalid messages, then we are done */ + else if (total_handled <= count) + goto update_count; + + /* keep reading two msgs until one is invalid or reportid limit */ + do { + num_handled = mxt_read_and_process_messages(data, 2); + if (num_handled < 0) + return IRQ_NONE; + + total_handled += num_handled; + + if (num_handled < 2) + break; + } while (total_handled < data->num_touchids); + +update_count: + data->last_message_count = total_handled; + + if (data->update_input) { + mxt_input_sync(data); + data->update_input = false; + } return IRQ_HANDLED; } @@ -792,7 +944,14 @@ static irqreturn_t mxt_interrupt(int irq, void *dev_id) return IRQ_HANDLED; } - return mxt_process_messages_until_invalid(data); + if (!data->object_table) + return IRQ_HANDLED; + + if (data->T44_address) { + return mxt_process_messages_t44(data); + } else { + return mxt_process_messages(data); + } } static int mxt_t6_command(struct mxt_data *data, u16 cmd_offset, @@ -866,78 +1025,314 @@ static void mxt_update_crc(struct mxt_data *data, u8 cmd, u8 value) mxt_wait_for_completion(data, &data->crc_completion, MXT_CRC_TIMEOUT); } -static int mxt_check_reg_init(struct mxt_data *data) +static void mxt_calc_crc24(u32 *crc, u8 firstbyte, u8 secondbyte) +{ + static const unsigned int crcpoly = 0x80001B; + u32 result; + u32 data_word; + + data_word = (secondbyte << 8) | firstbyte; + result = ((*crc << 1) ^ data_word); + + if (result & 0x1000000) + result ^= crcpoly; + + *crc = result; +} + +static u32 mxt_calculate_crc(u8 *base, off_t start_off, off_t end_off) +{ + u32 crc = 0; + u8 *ptr = base + start_off; + u8 *last_val = base + end_off - 1; + + if (end_off < start_off) + return -EINVAL; + + while (ptr < last_val) { + mxt_calc_crc24(&crc, *ptr, *(ptr + 1)); + ptr += 2; + } + + /* if len is odd, fill the last byte with 0 */ + if (ptr == last_val) + mxt_calc_crc24(&crc, *ptr, 0); + + /* Mask to 24-bit */ + crc &= 0x00FFFFFF; + + return crc; +} + +/* + * mxt_update_cfg - download configuration to chip + * + * Atmel Raw Config File Format + * + * The first four lines of the raw config file contain: + * 1) Version + * 2) Chip ID Information (first 7 bytes of device memory) + * 3) Chip Information Block 24-bit CRC Checksum + * 4) Chip Configuration 24-bit CRC Checksum + * + * The rest of the file consists of one line per object instance: + * <TYPE> <INSTANCE> <SIZE> <CONTENTS> + * + * <TYPE> - 2-byte object type as hex + * <INSTANCE> - 2-byte object instance number as hex + * <SIZE> - 2-byte object size as hex + * <CONTENTS> - array of <SIZE> 1-byte hex values + */ +static int mxt_update_cfg(struct mxt_data *data, const struct firmware *cfg) { - const struct mxt_platform_data *pdata = data->pdata; - struct mxt_object *object; struct device *dev = &data->client->dev; - int index = 0; - int i, size; + struct mxt_info cfg_info; + struct mxt_object *object; int ret; + int offset; + int data_pos; + int byte_offset; + int i; + int cfg_start_ofs; + u32 info_crc, config_crc, calculated_crc; + u8 *config_mem; + size_t config_mem_size; + unsigned int type, instance, size; + u8 val; + u16 reg; - if (!pdata->config) { - dev_dbg(dev, "No cfg data defined, skipping reg init\n"); - return 0; + mxt_update_crc(data, MXT_COMMAND_REPORTALL, 1); + + if (strncmp(cfg->data, MXT_CFG_MAGIC, strlen(MXT_CFG_MAGIC))) { + dev_err(dev, "Unrecognised config file\n"); + ret = -EINVAL; + goto release; } - mxt_update_crc(data, MXT_COMMAND_REPORTALL, 1); + data_pos = strlen(MXT_CFG_MAGIC); + + /* Load information block and check */ + for (i = 0; i < sizeof(struct mxt_info); i++) { + ret = sscanf(cfg->data + data_pos, "%hhx%n", + (unsigned char *)&cfg_info + i, + &offset); + if (ret != 1) { + dev_err(dev, "Bad format\n"); + ret = -EINVAL; + goto release; + } - if (data->config_crc == pdata->config_crc) { - dev_info(dev, "Config CRC 0x%06X: OK\n", data->config_crc); - return 0; + data_pos += offset; } - dev_info(dev, "Config CRC 0x%06X: does not match 0x%06X\n", - data->config_crc, pdata->config_crc); + if (cfg_info.family_id != data->info.family_id) { + dev_err(dev, "Family ID mismatch!\n"); + ret = -EINVAL; + goto release; + } - for (i = 0; i < data->info.object_num; i++) { - object = data->object_table + i; + if (cfg_info.variant_id != data->info.variant_id) { + dev_err(dev, "Variant ID mismatch!\n"); + ret = -EINVAL; + goto release; + } + + /* Read CRCs */ + ret = sscanf(cfg->data + data_pos, "%x%n", &info_crc, &offset); + if (ret != 1) { + dev_err(dev, "Bad format: failed to parse Info CRC\n"); + ret = -EINVAL; + goto release; + } + data_pos += offset; - if (!mxt_object_writable(object->type)) + ret = sscanf(cfg->data + data_pos, "%x%n", &config_crc, &offset); + if (ret != 1) { + dev_err(dev, "Bad format: failed to parse Config CRC\n"); + ret = -EINVAL; + goto release; + } + data_pos += offset; + + /* + * The Info Block CRC is calculated over mxt_info and the object + * table. If it does not match then we are trying to load the + * configuration from a different chip or firmware version, so + * the configuration CRC is invalid anyway. + */ + if (info_crc == data->info_crc) { + if (config_crc == 0 || data->config_crc == 0) { + dev_info(dev, "CRC zero, attempting to apply config\n"); + } else if (config_crc == data->config_crc) { + dev_dbg(dev, "Config CRC 0x%06X: OK\n", + data->config_crc); + ret = 0; + goto release; + } else { + dev_info(dev, "Config CRC 0x%06X: does not match file 0x%06X\n", + data->config_crc, config_crc); + } + } else { + dev_warn(dev, + "Warning: Info CRC error - device=0x%06X file=0x%06X\n", + data->info_crc, info_crc); + } + + /* Malloc memory to store configuration */ + cfg_start_ofs = MXT_OBJECT_START + + data->info.object_num * sizeof(struct mxt_object) + + MXT_INFO_CHECKSUM_SIZE; + config_mem_size = data->mem_size - cfg_start_ofs; + config_mem = kzalloc(config_mem_size, GFP_KERNEL); + if (!config_mem) { + dev_err(dev, "Failed to allocate memory\n"); + ret = -ENOMEM; + goto release; + } + + while (data_pos < cfg->size) { + /* Read type, instance, length */ + ret = sscanf(cfg->data + data_pos, "%x %x %x%n", + &type, &instance, &size, &offset); + if (ret == 0) { + /* EOF */ + break; + } else if (ret != 3) { + dev_err(dev, "Bad format: failed to parse object\n"); + ret = -EINVAL; + goto release_mem; + } + data_pos += offset; + + object = mxt_get_object(data, type); + if (!object) { + /* Skip object */ + for (i = 0; i < size; i++) { + ret = sscanf(cfg->data + data_pos, "%hhx%n", + &val, + &offset); + data_pos += offset; + } continue; + } - size = mxt_obj_size(object) * mxt_obj_instances(object); - if (index + size > pdata->config_length) { - dev_err(dev, "Not enough config data!\n"); - return -EINVAL; + if (size > mxt_obj_size(object)) { + /* + * Either we are in fallback mode due to wrong + * config or config from a later fw version, + * or the file is corrupt or hand-edited. + */ + dev_warn(dev, "Discarding %zu byte(s) in T%u\n", + size - mxt_obj_size(object), type); + } else if (mxt_obj_size(object) > size) { + /* + * If firmware is upgraded, new bytes may be added to + * end of objects. It is generally forward compatible + * to zero these bytes - previous behaviour will be + * retained. However this does invalidate the CRC and + * will force fallback mode until the configuration is + * updated. We warn here but do nothing else - the + * malloc has zeroed the entire configuration. + */ + dev_warn(dev, "Zeroing %zu byte(s) in T%d\n", + mxt_obj_size(object) - size, type); } - ret = __mxt_write_reg(data->client, object->start_address, - size, &pdata->config[index]); - if (ret) - return ret; - index += size; + if (instance >= mxt_obj_instances(object)) { + dev_err(dev, "Object instances exceeded!\n"); + ret = -EINVAL; + goto release_mem; + } + + reg = object->start_address + mxt_obj_size(object) * instance; + + for (i = 0; i < size; i++) { + ret = sscanf(cfg->data + data_pos, "%hhx%n", + &val, + &offset); + if (ret != 1) { + dev_err(dev, "Bad format in T%d\n", type); + ret = -EINVAL; + goto release_mem; + } + data_pos += offset; + + if (i > mxt_obj_size(object)) + continue; + + byte_offset = reg + i - cfg_start_ofs; + + if ((byte_offset >= 0) + && (byte_offset <= config_mem_size)) { + *(config_mem + byte_offset) = val; + } else { + dev_err(dev, "Bad object: reg:%d, T%d, ofs=%d\n", + reg, object->type, byte_offset); + ret = -EINVAL; + goto release_mem; + } + } + } + + /* Calculate crc of the received configs (not the raw config file) */ + if (data->T7_address < cfg_start_ofs) { + dev_err(dev, "Bad T7 address, T7addr = %x, config offset %x\n", + data->T7_address, cfg_start_ofs); + ret = 0; + goto release_mem; + } + + calculated_crc = mxt_calculate_crc(config_mem, + data->T7_address - cfg_start_ofs, + config_mem_size); + + if (config_crc > 0 && (config_crc != calculated_crc)) + dev_warn(dev, "Config CRC error, calculated=%06X, file=%06X\n", + calculated_crc, config_crc); + + /* Write configuration as blocks */ + byte_offset = 0; + while (byte_offset < config_mem_size) { + size = config_mem_size - byte_offset; + + if (size > MXT_MAX_BLOCK_WRITE) + size = MXT_MAX_BLOCK_WRITE; + + ret = __mxt_write_reg(data->client, + cfg_start_ofs + byte_offset, + size, config_mem + byte_offset); + if (ret != 0) { + dev_err(dev, "Config write error, ret=%d\n", ret); + goto release_mem; + } + + byte_offset += size; } mxt_update_crc(data, MXT_COMMAND_BACKUPNV, MXT_BACKUP_VALUE); ret = mxt_soft_reset(data); if (ret) - return ret; + goto release_mem; dev_info(dev, "Config successfully updated\n"); - return 0; +release_mem: + kfree(config_mem); +release: + release_firmware(cfg); + return ret; } -static int mxt_make_highchg(struct mxt_data *data) +static int mxt_acquire_irq(struct mxt_data *data) { - struct device *dev = &data->client->dev; - struct mxt_message message; - int count = 10; int error; - /* Read dummy message to make high CHG pin */ - do { - error = mxt_read_message(data, &message); - if (error) - return error; - } while (message.reportid != 0xff && --count); + enable_irq(data->irq); - if (!count) { - dev_err(dev, "CHG pin isn't cleared\n"); - return -EBUSY; - } + error = mxt_process_messages_until_invalid(data); + if (error) + return error; return 0; } @@ -956,24 +1351,55 @@ static int mxt_get_info(struct mxt_data *data) return 0; } +static void mxt_free_object_table(struct mxt_data *data) +{ + input_unregister_device(data->input_dev); + data->input_dev = NULL; + + kfree(data->object_table); + data->object_table = NULL; + kfree(data->msg_buf); + data->msg_buf = NULL; + data->T5_address = 0; + data->T5_msg_size = 0; + data->T6_reportid = 0; + data->T7_address = 0; + data->T9_reportid_min = 0; + data->T9_reportid_max = 0; + data->T19_reportid = 0; + data->T44_address = 0; + data->max_reportid = 0; +} + static int mxt_get_object_table(struct mxt_data *data) { struct i2c_client *client = data->client; size_t table_size; + struct mxt_object *object_table; int error; int i; u8 reportid; + u16 end_address; table_size = data->info.object_num * sizeof(struct mxt_object); + object_table = kzalloc(table_size, GFP_KERNEL); + if (!object_table) { + dev_err(&data->client->dev, "Failed to allocate memory\n"); + return -ENOMEM; + } + error = __mxt_read_reg(client, MXT_OBJECT_START, table_size, - data->object_table); - if (error) + object_table); + if (error) { + kfree(object_table); return error; + } /* Valid Report IDs start counting from 1 */ reportid = 1; + data->mem_size = 0; for (i = 0; i < data->info.object_num; i++) { - struct mxt_object *object = data->object_table + i; + struct mxt_object *object = object_table + i; u8 min_id, max_id; le16_to_cpus(&object->start_address); @@ -995,31 +1421,71 @@ static int mxt_get_object_table(struct mxt_data *data) min_id, max_id); switch (object->type) { + case MXT_GEN_MESSAGE_T5: + if (data->info.family_id == 0x80) { + /* + * On mXT224 read and discard unused CRC byte + * otherwise DMA reads are misaligned + */ + data->T5_msg_size = mxt_obj_size(object); + } else { + /* CRC not enabled, so skip last byte */ + data->T5_msg_size = mxt_obj_size(object) - 1; + } + data->T5_address = object->start_address; case MXT_GEN_COMMAND_T6: data->T6_reportid = min_id; data->T6_address = object->start_address; break; + case MXT_GEN_POWER_T7: + data->T7_address = object->start_address; + break; case MXT_TOUCH_MULTI_T9: data->T9_reportid_min = min_id; data->T9_reportid_max = max_id; + data->num_touchids = object->num_report_ids + * mxt_obj_instances(object); + break; + case MXT_SPT_MESSAGECOUNT_T44: + data->T44_address = object->start_address; break; case MXT_SPT_GPIOPWM_T19: data->T19_reportid = min_id; break; } + + end_address = object->start_address + + mxt_obj_size(object) * mxt_obj_instances(object) - 1; + + if (end_address >= data->mem_size) + data->mem_size = end_address + 1; + } + + /* Store maximum reportid */ + data->max_reportid = reportid; + + /* If T44 exists, T5 position has to be directly after */ + if (data->T44_address && (data->T5_address != data->T44_address + 1)) { + dev_err(&client->dev, "Invalid T44 position\n"); + error = -EINVAL; + goto free_object_table; + } + + data->msg_buf = kcalloc(data->max_reportid, + data->T5_msg_size, GFP_KERNEL); + if (!data->msg_buf) { + dev_err(&client->dev, "Failed to allocate message buffer\n"); + error = -ENOMEM; + goto free_object_table; } + data->object_table = object_table; + return 0; -} -static void mxt_free_object_table(struct mxt_data *data) -{ - kfree(data->object_table); - data->object_table = NULL; - data->T6_reportid = 0; - data->T9_reportid_min = 0; - data->T9_reportid_max = 0; - data->T19_reportid = 0; +free_object_table: + mxt_free_object_table(data); + return error; } static int mxt_read_t9_resolution(struct mxt_data *data) @@ -1070,55 +1536,255 @@ static int mxt_read_t9_resolution(struct mxt_data *data) return 0; } +static int mxt_input_open(struct input_dev *dev); +static void mxt_input_close(struct input_dev *dev); + +static int mxt_initialize_t9_input_device(struct mxt_data *data) +{ + struct device *dev = &data->client->dev; + const struct mxt_platform_data *pdata = data->pdata; + struct input_dev *input_dev; + int error; + unsigned int num_mt_slots; + unsigned int mt_flags = 0; + int i; + + error = mxt_read_t9_resolution(data); + if (error) + dev_warn(dev, "Failed to initialize T9 resolution\n"); + + input_dev = input_allocate_device(); + if (!input_dev) { + dev_err(dev, "Failed to allocate memory\n"); + return -ENOMEM; + } + + input_dev->name = "Atmel maXTouch Touchscreen"; + input_dev->phys = data->phys; + input_dev->id.bustype = BUS_I2C; + input_dev->dev.parent = dev; + input_dev->open = mxt_input_open; + input_dev->close = mxt_input_close; + + __set_bit(EV_ABS, input_dev->evbit); + __set_bit(EV_KEY, input_dev->evbit); + __set_bit(BTN_TOUCH, input_dev->keybit); + + if (pdata->t19_num_keys) { + __set_bit(INPUT_PROP_BUTTONPAD, input_dev->propbit); + + for (i = 0; i < pdata->t19_num_keys; i++) + if (pdata->t19_keymap[i] != KEY_RESERVED) + input_set_capability(input_dev, EV_KEY, + pdata->t19_keymap[i]); + + mt_flags |= INPUT_MT_POINTER; + + input_abs_set_res(input_dev, ABS_X, MXT_PIXELS_PER_MM); + input_abs_set_res(input_dev, ABS_Y, MXT_PIXELS_PER_MM); + input_abs_set_res(input_dev, ABS_MT_POSITION_X, + MXT_PIXELS_PER_MM); + input_abs_set_res(input_dev, ABS_MT_POSITION_Y, + MXT_PIXELS_PER_MM); + + input_dev->name = "Atmel maXTouch Touchpad"; + } + + /* For single touch */ + input_set_abs_params(input_dev, ABS_X, + 0, data->max_x, 0, 0); + input_set_abs_params(input_dev, ABS_Y, + 0, data->max_y, 0, 0); + input_set_abs_params(input_dev, ABS_PRESSURE, + 0, 255, 0, 0); + + /* For multi touch */ + num_mt_slots = data->T9_reportid_max - data->T9_reportid_min + 1; + error = input_mt_init_slots(input_dev, num_mt_slots, mt_flags); + if (error) { + dev_err(dev, "Error %d initialising slots\n", error); + goto err_free_mem; + } + + input_set_abs_params(input_dev, ABS_MT_TOUCH_MAJOR, + 0, MXT_MAX_AREA, 0, 0); + input_set_abs_params(input_dev, ABS_MT_POSITION_X, + 0, data->max_x, 0, 0); + input_set_abs_params(input_dev, ABS_MT_POSITION_Y, + 0, data->max_y, 0, 0); + input_set_abs_params(input_dev, ABS_MT_PRESSURE, + 0, 255, 0, 0); + + input_set_drvdata(input_dev, data); + + error = input_register_device(input_dev); + if (error) { + dev_err(dev, "Error %d registering input device\n", error); + goto err_free_mem; + } + + data->input_dev = input_dev; + + return 0; + +err_free_mem: + input_free_device(input_dev); + return error; +} + +static int mxt_configure_objects(struct mxt_data *data, + const struct firmware *cfg); + +static void mxt_config_cb(const struct firmware *cfg, void *ctx) +{ + mxt_configure_objects(ctx, cfg); +} + static int mxt_initialize(struct mxt_data *data) { struct i2c_client *client = data->client; - struct mxt_info *info = &data->info; int error; + bool alt_bootloader_addr = false; + bool retry = false; +retry_info: error = mxt_get_info(data); - if (error) - return error; + if (error) { +retry_bootloader: + error = mxt_probe_bootloader(data, alt_bootloader_addr); + if (error) { + if (alt_bootloader_addr) { + /* Chip is not in appmode or bootloader mode */ + return error; + } - data->object_table = kcalloc(info->object_num, - sizeof(struct mxt_object), - GFP_KERNEL); - if (!data->object_table) { - dev_err(&client->dev, "Failed to allocate memory\n"); - return -ENOMEM; + dev_info(&client->dev, "Trying alternate bootloader address\n"); + alt_bootloader_addr = true; + goto retry_bootloader; + } else { + if (retry) { + dev_err(&client->dev, "Could not recover from bootloader mode\n"); + /* + * We can reflash from this state, so do not + * abort init + */ + data->in_bootloader = true; + return 0; + } + + /* Attempt to exit bootloader into app mode */ + mxt_send_bootloader_cmd(data, false); + msleep(MXT_FW_RESET_TIME); + retry = true; + goto retry_info; + } } /* Get object table information */ error = mxt_get_object_table(data); if (error) { dev_err(&client->dev, "Error %d reading object table\n", error); - goto err_free_object_table; + return error; } - /* Check register init values */ - error = mxt_check_reg_init(data); - if (error) { - dev_err(&client->dev, "Error %d initializing configuration\n", - error); + mxt_acquire_irq(data); + if (error) goto err_free_object_table; + + request_firmware_nowait(THIS_MODULE, true, MXT_CFG_NAME, + &data->client->dev, GFP_KERNEL, data, + mxt_config_cb); + + return 0; + +err_free_object_table: + mxt_free_object_table(data); + return error; +} + +static int mxt_set_t7_power_cfg(struct mxt_data *data, u8 sleep) +{ + struct device *dev = &data->client->dev; + int error; + struct t7_config *new_config; + struct t7_config deepsleep = { .active = 0, .idle = 0 }; + + if (sleep == MXT_POWER_CFG_DEEPSLEEP) + new_config = &deepsleep; + else + new_config = &data->t7_cfg; + + error = __mxt_write_reg(data->client, data->T7_address, + sizeof(data->t7_cfg), new_config); + if (error) + return error; + + dev_dbg(dev, "Set T7 ACTV:%d IDLE:%d\n", + new_config->active, new_config->idle); + + return 0; +} + +static int mxt_init_t7_power_cfg(struct mxt_data *data) +{ + struct device *dev = &data->client->dev; + int error; + bool retry = false; + +recheck: + error = __mxt_read_reg(data->client, data->T7_address, + sizeof(data->t7_cfg), &data->t7_cfg); + if (error) + return error; + + if (data->t7_cfg.active == 0 || data->t7_cfg.idle == 0) { + if (!retry) { + dev_dbg(dev, "T7 cfg zero, resetting\n"); + mxt_soft_reset(data); + retry = true; + goto recheck; + } else { + dev_dbg(dev, "T7 cfg zero after reset, overriding\n"); + data->t7_cfg.active = 20; + data->t7_cfg.idle = 100; + return mxt_set_t7_power_cfg(data, MXT_POWER_CFG_RUN); + } } - error = mxt_read_t9_resolution(data); + dev_dbg(dev, "Initialized power cfg: ACTV %d, IDLE %d\n", + data->t7_cfg.active, data->t7_cfg.idle); + return 0; +} + +static int mxt_configure_objects(struct mxt_data *data, + const struct firmware *cfg) +{ + struct device *dev = &data->client->dev; + struct mxt_info *info = &data->info; + int error; + + if (cfg) { + error = mxt_update_cfg(data, cfg); + if (error) + dev_warn(dev, "Error %d updating config\n", error); + } + + error = mxt_init_t7_power_cfg(data); if (error) { - dev_err(&client->dev, "Failed to initialize T9 resolution\n"); - goto err_free_object_table; + dev_err(dev, "Failed to initialize power cfg\n"); + return error; } - dev_info(&client->dev, + error = mxt_initialize_t9_input_device(data); + if (error) + return error; + + dev_info(dev, "Family: %u Variant: %u Firmware V%u.%u.%02X Objects: %u\n", info->family_id, info->variant_id, info->version >> 4, info->version & 0xf, info->build, info->object_num); return 0; - -err_free_object_table: - mxt_free_object_table(data); - return error; } /* Firmware Version is returned as Major.Minor.Build */ @@ -1246,30 +1912,45 @@ static int mxt_load_fw(struct device *dev, const char *fn) if (ret) goto release_firmware; - ret = mxt_lookup_bootloader_address(data); - if (ret) - goto release_firmware; + if (!data->in_bootloader) { + /* Change to the bootloader mode */ + data->in_bootloader = true; - /* Change to the bootloader mode */ - data->in_bootloader = true; + ret = mxt_t6_command(data, MXT_COMMAND_RESET, + MXT_BOOT_VALUE, false); + if (ret) + goto release_firmware; - ret = mxt_t6_command(data, MXT_COMMAND_RESET, MXT_BOOT_VALUE, false); - if (ret) - goto release_firmware; + msleep(MXT_RESET_TIME); - msleep(MXT_RESET_TIME); + /* Do not need to scan since we know family ID */ + ret = mxt_lookup_bootloader_address(data, 0); + if (ret) + goto release_firmware; + } else { + enable_irq(data->irq); + } + mxt_free_object_table(data); reinit_completion(&data->bl_completion); - ret = mxt_check_bootloader(data, MXT_WAITING_BOOTLOAD_CMD); - if (ret) - goto disable_irq; + ret = mxt_check_bootloader(data, MXT_WAITING_BOOTLOAD_CMD, false); + if (ret) { + /* Bootloader may still be unlocked from previous attempt */ + ret = mxt_check_bootloader(data, MXT_WAITING_FRAME_DATA, false); + if (ret) + goto disable_irq; + } else { + dev_info(dev, "Unlocking bootloader\n"); - /* Unlock bootloader */ - mxt_unlock_bootloader(data); + /* Unlock bootloader */ + ret = mxt_send_bootloader_cmd(data, true); + if (ret) + goto disable_irq; + } while (pos < fw->size) { - ret = mxt_check_bootloader(data, MXT_WAITING_FRAME_DATA); + ret = mxt_check_bootloader(data, MXT_WAITING_FRAME_DATA, true); if (ret) goto disable_irq; @@ -1283,7 +1964,7 @@ static int mxt_load_fw(struct device *dev, const char *fn) if (ret) goto disable_irq; - ret = mxt_check_bootloader(data, MXT_FRAME_CRC_PASS); + ret = mxt_check_bootloader(data, MXT_FRAME_CRC_PASS, true); if (ret) { retry++; @@ -1343,13 +2024,7 @@ static ssize_t mxt_update_fw_store(struct device *dev, } else { dev_info(dev, "The firmware update succeeded\n"); - mxt_free_object_table(data); - - mxt_initialize(data); - - enable_irq(data->irq); - - error = mxt_make_highchg(data); + error = mxt_initialize(data); if (error) return error; } @@ -1376,16 +2051,15 @@ static const struct attribute_group mxt_attr_group = { static void mxt_start(struct mxt_data *data) { - /* Touch enable */ - mxt_write_object(data, - MXT_TOUCH_MULTI_T9, MXT_TOUCH_CTRL, 0x83); + mxt_set_t7_power_cfg(data, MXT_POWER_CFG_RUN); + + /* Recalibrate since chip has been in deep sleep */ + mxt_t6_command(data, MXT_COMMAND_CALIBRATE, 1, false); } static void mxt_stop(struct mxt_data *data) { - /* Touch disable */ - mxt_write_object(data, - MXT_TOUCH_MULTI_T9, MXT_TOUCH_CTRL, 0); + mxt_set_t7_power_cfg(data, MXT_POWER_CFG_DEEPSLEEP); } static int mxt_input_open(struct input_dev *dev) @@ -1404,138 +2078,112 @@ static void mxt_input_close(struct input_dev *dev) mxt_stop(data); } -static int mxt_probe(struct i2c_client *client, - const struct i2c_device_id *id) +#ifdef CONFIG_OF +static struct mxt_platform_data *mxt_parse_dt(struct i2c_client *client) +{ + struct mxt_platform_data *pdata; + u32 *keymap; + u32 keycode; + int proplen, i, ret; + + if (!client->dev.of_node) + return ERR_PTR(-ENODEV); + + pdata = devm_kzalloc(&client->dev, sizeof(*pdata), GFP_KERNEL); + if (!pdata) + return ERR_PTR(-ENOMEM); + + if (of_find_property(client->dev.of_node, "linux,gpio-keymap", + &proplen)) { + pdata->t19_num_keys = proplen / sizeof(u32); + + keymap = devm_kzalloc(&client->dev, + pdata->t19_num_keys * sizeof(keymap[0]), + GFP_KERNEL); + if (!keymap) + return ERR_PTR(-ENOMEM); + + for (i = 0; i < pdata->t19_num_keys; i++) { + ret = of_property_read_u32_index(client->dev.of_node, + "linux,gpio-keymap", i, &keycode); + if (ret) + keycode = KEY_RESERVED; + + keymap[i] = keycode; + } + + pdata->t19_keymap = keymap; + } + + return pdata; +} +#else +static struct mxt_platform_data *mxt_parse_dt(struct i2c_client *client) +{ + dev_dbg(&client->dev, "No platform data specified\n"); + return ERR_PTR(-EINVAL); +} +#endif + +static int mxt_probe(struct i2c_client *client, const struct i2c_device_id *id) { - const struct mxt_platform_data *pdata = dev_get_platdata(&client->dev); struct mxt_data *data; - struct input_dev *input_dev; + const struct mxt_platform_data *pdata; int error; - unsigned int num_mt_slots; - unsigned int mt_flags = 0; - int i; - if (!pdata) - return -EINVAL; + pdata = dev_get_platdata(&client->dev); + if (!pdata) { + pdata = mxt_parse_dt(client); + if (IS_ERR(pdata)) + return PTR_ERR(pdata); + } data = kzalloc(sizeof(struct mxt_data), GFP_KERNEL); - input_dev = input_allocate_device(); - if (!data || !input_dev) { + if (!data) { dev_err(&client->dev, "Failed to allocate memory\n"); - error = -ENOMEM; - goto err_free_mem; + return -ENOMEM; } - input_dev->name = "Atmel maXTouch Touchscreen"; snprintf(data->phys, sizeof(data->phys), "i2c-%u-%04x/input0", client->adapter->nr, client->addr); - input_dev->phys = data->phys; - - input_dev->id.bustype = BUS_I2C; - input_dev->dev.parent = &client->dev; - input_dev->open = mxt_input_open; - input_dev->close = mxt_input_close; - data->client = client; - data->input_dev = input_dev; data->pdata = pdata; data->irq = client->irq; + i2c_set_clientdata(client, data); init_completion(&data->bl_completion); init_completion(&data->reset_completion); init_completion(&data->crc_completion); - error = mxt_initialize(data); - if (error) - goto err_free_mem; - - __set_bit(EV_ABS, input_dev->evbit); - __set_bit(EV_KEY, input_dev->evbit); - __set_bit(BTN_TOUCH, input_dev->keybit); - - if (pdata->t19_num_keys) { - __set_bit(INPUT_PROP_BUTTONPAD, input_dev->propbit); - - for (i = 0; i < pdata->t19_num_keys; i++) - if (pdata->t19_keymap[i] != KEY_RESERVED) - input_set_capability(input_dev, EV_KEY, - pdata->t19_keymap[i]); - - mt_flags |= INPUT_MT_POINTER; - - input_abs_set_res(input_dev, ABS_X, MXT_PIXELS_PER_MM); - input_abs_set_res(input_dev, ABS_Y, MXT_PIXELS_PER_MM); - input_abs_set_res(input_dev, ABS_MT_POSITION_X, - MXT_PIXELS_PER_MM); - input_abs_set_res(input_dev, ABS_MT_POSITION_Y, - MXT_PIXELS_PER_MM); - - input_dev->name = "Atmel maXTouch Touchpad"; - } - - /* For single touch */ - input_set_abs_params(input_dev, ABS_X, - 0, data->max_x, 0, 0); - input_set_abs_params(input_dev, ABS_Y, - 0, data->max_y, 0, 0); - input_set_abs_params(input_dev, ABS_PRESSURE, - 0, 255, 0, 0); - - /* For multi touch */ - num_mt_slots = data->T9_reportid_max - data->T9_reportid_min + 1; - error = input_mt_init_slots(input_dev, num_mt_slots, mt_flags); - if (error) - goto err_free_object; - input_set_abs_params(input_dev, ABS_MT_TOUCH_MAJOR, - 0, MXT_MAX_AREA, 0, 0); - input_set_abs_params(input_dev, ABS_MT_POSITION_X, - 0, data->max_x, 0, 0); - input_set_abs_params(input_dev, ABS_MT_POSITION_Y, - 0, data->max_y, 0, 0); - input_set_abs_params(input_dev, ABS_MT_PRESSURE, - 0, 255, 0, 0); - - input_set_drvdata(input_dev, data); - i2c_set_clientdata(client, data); - error = request_threaded_irq(client->irq, NULL, mxt_interrupt, pdata->irqflags | IRQF_ONESHOT, client->name, data); if (error) { dev_err(&client->dev, "Failed to register interrupt\n"); - goto err_free_object; + goto err_free_mem; } - error = mxt_make_highchg(data); - if (error) - goto err_free_irq; + disable_irq(client->irq); - error = input_register_device(input_dev); - if (error) { - dev_err(&client->dev, "Error %d registering input device\n", - error); + error = mxt_initialize(data); + if (error) goto err_free_irq; - } error = sysfs_create_group(&client->dev.kobj, &mxt_attr_group); if (error) { dev_err(&client->dev, "Failure %d creating sysfs group\n", error); - goto err_unregister_device; + goto err_free_object; } return 0; -err_unregister_device: - input_unregister_device(input_dev); - input_dev = NULL; +err_free_object: + mxt_free_object_table(data); err_free_irq: free_irq(client->irq, data); -err_free_object: - kfree(data->object_table); err_free_mem: - input_free_device(input_dev); kfree(data); return error; } @@ -1547,7 +2195,7 @@ static int mxt_remove(struct i2c_client *client) sysfs_remove_group(&client->dev.kobj, &mxt_attr_group); free_irq(data->irq, data); input_unregister_device(data->input_dev); - kfree(data->object_table); + mxt_free_object_table(data); kfree(data); return 0; @@ -1576,8 +2224,6 @@ static int mxt_resume(struct device *dev) struct mxt_data *data = i2c_get_clientdata(client); struct input_dev *input_dev = data->input_dev; - mxt_soft_reset(data); - mutex_lock(&input_dev->mutex); if (input_dev->users) @@ -1591,6 +2237,12 @@ static int mxt_resume(struct device *dev) static SIMPLE_DEV_PM_OPS(mxt_pm_ops, mxt_suspend, mxt_resume); +static const struct of_device_id mxt_of_match[] = { + { .compatible = "atmel,maxtouch", }, + {}, +}; +MODULE_DEVICE_TABLE(of, mxt_of_match); + static const struct i2c_device_id mxt_id[] = { { "qt602240_ts", 0 }, { "atmel_mxt_ts", 0 }, @@ -1604,6 +2256,7 @@ static struct i2c_driver mxt_driver = { .driver = { .name = "atmel_mxt_ts", .owner = THIS_MODULE, + .of_match_table = of_match_ptr(mxt_of_match), .pm = &mxt_pm_ops, }, .probe = mxt_probe, diff --git a/drivers/input/touchscreen/edt-ft5x06.c b/drivers/input/touchscreen/edt-ft5x06.c index d4f33992ad8c..5a6d50c004d7 100644 --- a/drivers/input/touchscreen/edt-ft5x06.c +++ b/drivers/input/touchscreen/edt-ft5x06.c @@ -733,8 +733,7 @@ edt_ft5x06_ts_prepare_debugfs(struct edt_ft5x06_ts_data *tsdata, static void edt_ft5x06_ts_teardown_debugfs(struct edt_ft5x06_ts_data *tsdata) { - if (tsdata->debug_dir) - debugfs_remove_recursive(tsdata->debug_dir); + debugfs_remove_recursive(tsdata->debug_dir); kfree(tsdata->raw_buffer); } diff --git a/drivers/input/touchscreen/ipaq-micro-ts.c b/drivers/input/touchscreen/ipaq-micro-ts.c new file mode 100644 index 000000000000..62c8976e616f --- /dev/null +++ b/drivers/input/touchscreen/ipaq-micro-ts.c @@ -0,0 +1,166 @@ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * h3600 atmel micro companion support, touchscreen subdevice + * Author : Alessandro Gardich <gremlin@gremlin.it> + * Author : Dmitry Artamonow <mad_soft@inbox.ru> + * Author : Linus Walleij <linus.walleij@linaro.org> + * + */ + +#include <asm/byteorder.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/pm.h> +#include <linux/delay.h> +#include <linux/device.h> +#include <linux/input.h> +#include <linux/platform_device.h> +#include <linux/slab.h> +#include <linux/mfd/ipaq-micro.h> + +struct touchscreen_data { + struct input_dev *input; + struct ipaq_micro *micro; +}; + +static void micro_ts_receive(void *data, int len, unsigned char *msg) +{ + struct touchscreen_data *ts = data; + + if (len == 4) { + input_report_abs(ts->input, ABS_X, + be16_to_cpup((__be16 *) &msg[2])); + input_report_abs(ts->input, ABS_Y, + be16_to_cpup((__be16 *) &msg[0])); + input_report_key(ts->input, BTN_TOUCH, 1); + input_sync(ts->input); + } else if (len == 0) { + input_report_abs(ts->input, ABS_X, 0); + input_report_abs(ts->input, ABS_Y, 0); + input_report_key(ts->input, BTN_TOUCH, 0); + input_sync(ts->input); + } +} + +static void micro_ts_toggle_receive(struct touchscreen_data *ts, bool enable) +{ + struct ipaq_micro *micro = ts->micro; + + spin_lock_irq(µ->lock); + + if (enable) { + micro->ts = micro_ts_receive; + micro->ts_data = ts; + } else { + micro->ts = NULL; + micro->ts_data = NULL; + } + + spin_unlock_irq(&ts->micro->lock); +} + +static int micro_ts_open(struct input_dev *input) +{ + struct touchscreen_data *ts = input_get_drvdata(input); + + micro_ts_toggle_receive(ts, true); + + return 0; +} + +static void micro_ts_close(struct input_dev *input) +{ + struct touchscreen_data *ts = input_get_drvdata(input); + + micro_ts_toggle_receive(ts, false); +} + +static int micro_ts_probe(struct platform_device *pdev) +{ + struct ipaq_micro *micro = dev_get_drvdata(pdev->dev.parent); + struct touchscreen_data *ts; + int error; + + ts = devm_kzalloc(&pdev->dev, sizeof(*ts), GFP_KERNEL); + if (!ts) + return -ENOMEM; + + ts->micro = micro; + + ts->input = devm_input_allocate_device(&pdev->dev); + if (!ts->input) { + dev_err(&pdev->dev, "failed to allocate input device\n"); + return -ENOMEM; + } + + ts->input->name = "ipaq micro ts"; + ts->input->open = micro_ts_open; + ts->input->close = micro_ts_close; + + input_set_drvdata(ts->input, ts); + + input_set_capability(ts->input, EV_KEY, BTN_TOUCH); + input_set_capability(ts->input, EV_ABS, ABS_X); + input_set_capability(ts->input, EV_ABS, ABS_Y); + input_set_abs_params(ts->input, ABS_X, 0, 1023, 0, 0); + input_set_abs_params(ts->input, ABS_Y, 0, 1023, 0, 0); + + error = input_register_device(ts->input); + if (error) { + dev_err(&pdev->dev, "error registering touch input\n"); + return error; + } + + platform_set_drvdata(pdev, ts); + + dev_info(&pdev->dev, "iPAQ micro touchscreen\n"); + + return 0; +} + +#ifdef CONFIG_PM_SLEEP +static int micro_ts_suspend(struct device *dev) +{ + struct touchscreen_data *ts = dev_get_drvdata(dev); + + micro_ts_toggle_receive(ts, false); + + return 0; +} + +static int micro_ts_resume(struct device *dev) +{ + struct touchscreen_data *ts = dev_get_drvdata(dev); + struct input_dev *input = ts->input; + + mutex_lock(&input->mutex); + + if (input->users) + micro_ts_toggle_receive(ts, true); + + mutex_unlock(&input->mutex); + + return 0; +} +#endif + +static const struct dev_pm_ops micro_ts_dev_pm_ops = { + SET_SYSTEM_SLEEP_PM_OPS(micro_ts_suspend, micro_ts_resume) +}; + +static struct platform_driver micro_ts_device_driver = { + .driver = { + .name = "ipaq-micro-ts", + .pm = µ_ts_dev_pm_ops, + }, + .probe = micro_ts_probe, +}; +module_platform_driver(micro_ts_device_driver); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("driver for iPAQ Atmel micro touchscreen"); +MODULE_ALIAS("platform:ipaq-micro-ts"); diff --git a/drivers/input/touchscreen/jornada720_ts.c b/drivers/input/touchscreen/jornada720_ts.c index 7324c5c0fb86..651ec71a5c68 100644 --- a/drivers/input/touchscreen/jornada720_ts.c +++ b/drivers/input/touchscreen/jornada720_ts.c @@ -36,22 +36,21 @@ struct jornada_ts { static void jornada720_ts_collect_data(struct jornada_ts *jornada_ts) { + /* 3 low word X samples */ + jornada_ts->x_data[0] = jornada_ssp_byte(TXDUMMY); + jornada_ts->x_data[1] = jornada_ssp_byte(TXDUMMY); + jornada_ts->x_data[2] = jornada_ssp_byte(TXDUMMY); - /* 3 low word X samples */ - jornada_ts->x_data[0] = jornada_ssp_byte(TXDUMMY); - jornada_ts->x_data[1] = jornada_ssp_byte(TXDUMMY); - jornada_ts->x_data[2] = jornada_ssp_byte(TXDUMMY); + /* 3 low word Y samples */ + jornada_ts->y_data[0] = jornada_ssp_byte(TXDUMMY); + jornada_ts->y_data[1] = jornada_ssp_byte(TXDUMMY); + jornada_ts->y_data[2] = jornada_ssp_byte(TXDUMMY); - /* 3 low word Y samples */ - jornada_ts->y_data[0] = jornada_ssp_byte(TXDUMMY); - jornada_ts->y_data[1] = jornada_ssp_byte(TXDUMMY); - jornada_ts->y_data[2] = jornada_ssp_byte(TXDUMMY); + /* combined x samples bits */ + jornada_ts->x_data[3] = jornada_ssp_byte(TXDUMMY); - /* combined x samples bits */ - jornada_ts->x_data[3] = jornada_ssp_byte(TXDUMMY); - - /* combined y samples bits */ - jornada_ts->y_data[3] = jornada_ssp_byte(TXDUMMY); + /* combined y samples bits */ + jornada_ts->y_data[3] = jornada_ssp_byte(TXDUMMY); } static int jornada720_ts_average(int coords[4]) @@ -104,13 +103,13 @@ static int jornada720_ts_probe(struct platform_device *pdev) struct input_dev *input_dev; int error; - jornada_ts = kzalloc(sizeof(struct jornada_ts), GFP_KERNEL); - input_dev = input_allocate_device(); + jornada_ts = devm_kzalloc(&pdev->dev, sizeof(*jornada_ts), GFP_KERNEL); + if (!jornada_ts) + return -ENOMEM; - if (!jornada_ts || !input_dev) { - error = -ENOMEM; - goto fail1; - } + input_dev = devm_input_allocate_device(&pdev->dev); + if (!input_dev) + return -ENOMEM; platform_set_drvdata(pdev, jornada_ts); @@ -126,36 +125,18 @@ static int jornada720_ts_probe(struct platform_device *pdev) input_set_abs_params(input_dev, ABS_X, 270, 3900, 0, 0); input_set_abs_params(input_dev, ABS_Y, 180, 3700, 0, 0); - error = request_irq(IRQ_GPIO9, - jornada720_ts_interrupt, - IRQF_TRIGGER_RISING, - "HP7XX Touchscreen driver", pdev); + error = devm_request_irq(&pdev->dev, IRQ_GPIO9, + jornada720_ts_interrupt, + IRQF_TRIGGER_RISING, + "HP7XX Touchscreen driver", pdev); if (error) { - printk(KERN_INFO "HP7XX TS : Unable to acquire irq!\n"); - goto fail1; + dev_err(&pdev->dev, "HP7XX TS : Unable to acquire irq!\n"); + return error; } error = input_register_device(jornada_ts->dev); if (error) - goto fail2; - - return 0; - - fail2: - free_irq(IRQ_GPIO9, pdev); - fail1: - input_free_device(input_dev); - kfree(jornada_ts); - return error; -} - -static int jornada720_ts_remove(struct platform_device *pdev) -{ - struct jornada_ts *jornada_ts = platform_get_drvdata(pdev); - - free_irq(IRQ_GPIO9, pdev); - input_unregister_device(jornada_ts->dev); - kfree(jornada_ts); + return error; return 0; } @@ -165,7 +146,6 @@ MODULE_ALIAS("platform:jornada_ts"); static struct platform_driver jornada720_ts_driver = { .probe = jornada720_ts_probe, - .remove = jornada720_ts_remove, .driver = { .name = "jornada_ts", .owner = THIS_MODULE, diff --git a/drivers/input/touchscreen/mcs5000_ts.c b/drivers/input/touchscreen/mcs5000_ts.c index 00510a9836b3..8b47e1fecb25 100644 --- a/drivers/input/touchscreen/mcs5000_ts.c +++ b/drivers/input/touchscreen/mcs5000_ts.c @@ -248,8 +248,7 @@ static int mcs5000_ts_probe(struct i2c_client *client, return 0; } -#ifdef CONFIG_PM -static int mcs5000_ts_suspend(struct device *dev) +static int __maybe_unused mcs5000_ts_suspend(struct device *dev) { struct i2c_client *client = to_i2c_client(dev); @@ -259,7 +258,7 @@ static int mcs5000_ts_suspend(struct device *dev) return 0; } -static int mcs5000_ts_resume(struct device *dev) +static int __maybe_unused mcs5000_ts_resume(struct device *dev) { struct i2c_client *client = to_i2c_client(dev); struct mcs5000_ts_data *data = i2c_get_clientdata(client); @@ -269,7 +268,6 @@ static int mcs5000_ts_resume(struct device *dev) return 0; } -#endif static SIMPLE_DEV_PM_OPS(mcs5000_ts_pm, mcs5000_ts_suspend, mcs5000_ts_resume); diff --git a/drivers/input/touchscreen/pixcir_i2c_ts.c b/drivers/input/touchscreen/pixcir_i2c_ts.c index 19c6c0fdc94b..fc49c75317d1 100644 --- a/drivers/input/touchscreen/pixcir_i2c_ts.c +++ b/drivers/input/touchscreen/pixcir_i2c_ts.c @@ -23,22 +23,51 @@ #include <linux/slab.h> #include <linux/i2c.h> #include <linux/input.h> +#include <linux/input/mt.h> #include <linux/input/pixcir_ts.h> #include <linux/gpio.h> +#include <linux/of.h> +#include <linux/of_gpio.h> +#include <linux/of_device.h> + +#define PIXCIR_MAX_SLOTS 5 /* Max fingers supported by driver */ struct pixcir_i2c_ts_data { struct i2c_client *client; struct input_dev *input; - const struct pixcir_ts_platform_data *chip; + const struct pixcir_ts_platform_data *pdata; bool running; + int max_fingers; /* Max fingers supported in this instance */ +}; + +struct pixcir_touch { + int x; + int y; + int id; +}; + +struct pixcir_report_data { + int num_touches; + struct pixcir_touch touches[PIXCIR_MAX_SLOTS]; }; -static void pixcir_ts_poscheck(struct pixcir_i2c_ts_data *data) +static void pixcir_ts_parse(struct pixcir_i2c_ts_data *tsdata, + struct pixcir_report_data *report) { - struct pixcir_i2c_ts_data *tsdata = data; - u8 rdbuf[10], wrbuf[1] = { 0 }; + u8 rdbuf[2 + PIXCIR_MAX_SLOTS * 5]; + u8 wrbuf[1] = { 0 }; + u8 *bufptr; u8 touch; - int ret; + int ret, i; + int readsize; + const struct pixcir_i2c_chip_data *chip = &tsdata->pdata->chip; + + memset(report, 0, sizeof(struct pixcir_report_data)); + + i = chip->has_hw_ids ? 1 : 0; + readsize = 2 + tsdata->max_fingers * (4 + i); + if (readsize > sizeof(rdbuf)) + readsize = sizeof(rdbuf); ret = i2c_master_send(tsdata->client, wrbuf, sizeof(wrbuf)); if (ret != sizeof(wrbuf)) { @@ -48,7 +77,7 @@ static void pixcir_ts_poscheck(struct pixcir_i2c_ts_data *data) return; } - ret = i2c_master_recv(tsdata->client, rdbuf, sizeof(rdbuf)); + ret = i2c_master_recv(tsdata->client, rdbuf, readsize); if (ret != sizeof(rdbuf)) { dev_err(&tsdata->client->dev, "%s: i2c_master_recv failed(), ret=%d\n", @@ -56,45 +85,103 @@ static void pixcir_ts_poscheck(struct pixcir_i2c_ts_data *data) return; } - touch = rdbuf[0]; - if (touch) { - u16 posx1 = (rdbuf[3] << 8) | rdbuf[2]; - u16 posy1 = (rdbuf[5] << 8) | rdbuf[4]; - u16 posx2 = (rdbuf[7] << 8) | rdbuf[6]; - u16 posy2 = (rdbuf[9] << 8) | rdbuf[8]; - - input_report_key(tsdata->input, BTN_TOUCH, 1); - input_report_abs(tsdata->input, ABS_X, posx1); - input_report_abs(tsdata->input, ABS_Y, posy1); - - input_report_abs(tsdata->input, ABS_MT_POSITION_X, posx1); - input_report_abs(tsdata->input, ABS_MT_POSITION_Y, posy1); - input_mt_sync(tsdata->input); - - if (touch == 2) { - input_report_abs(tsdata->input, - ABS_MT_POSITION_X, posx2); - input_report_abs(tsdata->input, - ABS_MT_POSITION_Y, posy2); - input_mt_sync(tsdata->input); + touch = rdbuf[0] & 0x7; + if (touch > tsdata->max_fingers) + touch = tsdata->max_fingers; + + report->num_touches = touch; + bufptr = &rdbuf[2]; + + for (i = 0; i < touch; i++) { + report->touches[i].x = (bufptr[1] << 8) | bufptr[0]; + report->touches[i].y = (bufptr[3] << 8) | bufptr[2]; + + if (chip->has_hw_ids) { + report->touches[i].id = bufptr[4]; + bufptr = bufptr + 5; + } else { + bufptr = bufptr + 4; + } + } +} + +static void pixcir_ts_report(struct pixcir_i2c_ts_data *ts, + struct pixcir_report_data *report) +{ + struct input_mt_pos pos[PIXCIR_MAX_SLOTS]; + int slots[PIXCIR_MAX_SLOTS]; + struct pixcir_touch *touch; + int n, i, slot; + struct device *dev = &ts->client->dev; + const struct pixcir_i2c_chip_data *chip = &ts->pdata->chip; + + n = report->num_touches; + if (n > PIXCIR_MAX_SLOTS) + n = PIXCIR_MAX_SLOTS; + + if (!chip->has_hw_ids) { + for (i = 0; i < n; i++) { + touch = &report->touches[i]; + pos[i].x = touch->x; + pos[i].y = touch->y; + } + + input_mt_assign_slots(ts->input, slots, pos, n); + } + + for (i = 0; i < n; i++) { + touch = &report->touches[i]; + + if (chip->has_hw_ids) { + slot = input_mt_get_slot_by_key(ts->input, touch->id); + if (slot < 0) { + dev_dbg(dev, "no free slot for id 0x%x\n", + touch->id); + continue; + } + } else { + slot = slots[i]; } - } else { - input_report_key(tsdata->input, BTN_TOUCH, 0); + + input_mt_slot(ts->input, slot); + input_mt_report_slot_state(ts->input, + MT_TOOL_FINGER, true); + + input_event(ts->input, EV_ABS, ABS_MT_POSITION_X, touch->x); + input_event(ts->input, EV_ABS, ABS_MT_POSITION_Y, touch->y); + + dev_dbg(dev, "%d: slot %d, x %d, y %d\n", + i, slot, touch->x, touch->y); } - input_sync(tsdata->input); + input_mt_sync_frame(ts->input); + input_sync(ts->input); } static irqreturn_t pixcir_ts_isr(int irq, void *dev_id) { struct pixcir_i2c_ts_data *tsdata = dev_id; - const struct pixcir_ts_platform_data *pdata = tsdata->chip; + const struct pixcir_ts_platform_data *pdata = tsdata->pdata; + struct pixcir_report_data report; while (tsdata->running) { - pixcir_ts_poscheck(tsdata); - - if (gpio_get_value(pdata->gpio_attb)) + /* parse packet */ + pixcir_ts_parse(tsdata, &report); + + /* report it */ + pixcir_ts_report(tsdata, &report); + + if (gpio_get_value(pdata->gpio_attb)) { + if (report.num_touches) { + /* + * Last report with no finger up? + * Do it now then. + */ + input_mt_sync_frame(tsdata->input); + input_sync(tsdata->input); + } break; + } msleep(20); } @@ -323,16 +410,69 @@ unlock: static SIMPLE_DEV_PM_OPS(pixcir_dev_pm_ops, pixcir_i2c_ts_suspend, pixcir_i2c_ts_resume); +#ifdef CONFIG_OF +static const struct of_device_id pixcir_of_match[]; + +static struct pixcir_ts_platform_data *pixcir_parse_dt(struct device *dev) +{ + struct pixcir_ts_platform_data *pdata; + struct device_node *np = dev->of_node; + const struct of_device_id *match; + + match = of_match_device(of_match_ptr(pixcir_of_match), dev); + if (!match) + return ERR_PTR(-EINVAL); + + pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL); + if (!pdata) + return ERR_PTR(-ENOMEM); + + pdata->chip = *(const struct pixcir_i2c_chip_data *)match->data; + + pdata->gpio_attb = of_get_named_gpio(np, "attb-gpio", 0); + /* gpio_attb validity is checked in probe */ + + if (of_property_read_u32(np, "touchscreen-size-x", &pdata->x_max)) { + dev_err(dev, "Failed to get touchscreen-size-x property\n"); + return ERR_PTR(-EINVAL); + } + pdata->x_max -= 1; + + if (of_property_read_u32(np, "touchscreen-size-y", &pdata->y_max)) { + dev_err(dev, "Failed to get touchscreen-size-y property\n"); + return ERR_PTR(-EINVAL); + } + pdata->y_max -= 1; + + dev_dbg(dev, "%s: x %d, y %d, gpio %d\n", __func__, + pdata->x_max + 1, pdata->y_max + 1, pdata->gpio_attb); + + return pdata; +} +#else +static struct pixcir_ts_platform_data *pixcir_parse_dt(struct device *dev) +{ + return ERR_PTR(-EINVAL); +} +#endif + static int pixcir_i2c_ts_probe(struct i2c_client *client, const struct i2c_device_id *id) { const struct pixcir_ts_platform_data *pdata = dev_get_platdata(&client->dev); struct device *dev = &client->dev; + struct device_node *np = dev->of_node; struct pixcir_i2c_ts_data *tsdata; struct input_dev *input; int error; + if (np && !pdata) { + pdata = pixcir_parse_dt(dev); + if (IS_ERR(pdata)) + return PTR_ERR(pdata); + } + if (!pdata) { dev_err(&client->dev, "platform data not defined\n"); return -EINVAL; @@ -343,6 +483,11 @@ static int pixcir_i2c_ts_probe(struct i2c_client *client, return -EINVAL; } + if (!pdata->chip.max_fingers) { + dev_err(dev, "Invalid max_fingers in pdata\n"); + return -EINVAL; + } + tsdata = devm_kzalloc(dev, sizeof(*tsdata), GFP_KERNEL); if (!tsdata) return -ENOMEM; @@ -355,7 +500,7 @@ static int pixcir_i2c_ts_probe(struct i2c_client *client, tsdata->client = client; tsdata->input = input; - tsdata->chip = pdata; + tsdata->pdata = pdata; input->name = client->name; input->id.bustype = BUS_I2C; @@ -371,6 +516,20 @@ static int pixcir_i2c_ts_probe(struct i2c_client *client, input_set_abs_params(input, ABS_MT_POSITION_X, 0, pdata->x_max, 0, 0); input_set_abs_params(input, ABS_MT_POSITION_Y, 0, pdata->y_max, 0, 0); + tsdata->max_fingers = tsdata->pdata->chip.max_fingers; + if (tsdata->max_fingers > PIXCIR_MAX_SLOTS) { + tsdata->max_fingers = PIXCIR_MAX_SLOTS; + dev_info(dev, "Limiting maximum fingers to %d\n", + tsdata->max_fingers); + } + + error = input_mt_init_slots(input, tsdata->max_fingers, + INPUT_MT_DIRECT | INPUT_MT_DROP_UNUSED); + if (error) { + dev_err(dev, "Error initializing Multi-Touch slots\n"); + return error; + } + input_set_drvdata(input, tsdata); error = devm_gpio_request_one(dev, pdata->gpio_attb, @@ -419,15 +578,36 @@ static int pixcir_i2c_ts_remove(struct i2c_client *client) static const struct i2c_device_id pixcir_i2c_ts_id[] = { { "pixcir_ts", 0 }, + { "pixcir_tangoc", 0 }, { } }; MODULE_DEVICE_TABLE(i2c, pixcir_i2c_ts_id); +#ifdef CONFIG_OF +static const struct pixcir_i2c_chip_data pixcir_ts_data = { + .max_fingers = 2, + /* no hw id support */ +}; + +static const struct pixcir_i2c_chip_data pixcir_tangoc_data = { + .max_fingers = 5, + .has_hw_ids = true, +}; + +static const struct of_device_id pixcir_of_match[] = { + { .compatible = "pixcir,pixcir_ts", .data = &pixcir_ts_data }, + { .compatible = "pixcir,pixcir_tangoc", .data = &pixcir_tangoc_data }, + { } +}; +MODULE_DEVICE_TABLE(of, pixcir_of_match); +#endif + static struct i2c_driver pixcir_i2c_ts_driver = { .driver = { .owner = THIS_MODULE, .name = "pixcir_ts", .pm = &pixcir_dev_pm_ops, + .of_match_table = of_match_ptr(pixcir_of_match), }, .probe = pixcir_i2c_ts_probe, .remove = pixcir_i2c_ts_remove, diff --git a/drivers/input/touchscreen/s3c2410_ts.c b/drivers/input/touchscreen/s3c2410_ts.c index 19cb247dbb86..5a69ded9b53c 100644 --- a/drivers/input/touchscreen/s3c2410_ts.c +++ b/drivers/input/touchscreen/s3c2410_ts.c @@ -264,7 +264,7 @@ static int s3c2410ts_probe(struct platform_device *pdev) return -ENOENT; } - clk_enable(ts.clock); + clk_prepare_enable(ts.clock); dev_dbg(dev, "got and enabled clocks\n"); ts.irq_tc = ret = platform_get_irq(pdev, 0); @@ -369,7 +369,7 @@ static int s3c2410ts_remove(struct platform_device *pdev) free_irq(ts.irq_tc, ts.input); del_timer_sync(&touch_timer); - clk_disable(ts.clock); + clk_disable_unprepare(ts.clock); clk_put(ts.clock); input_unregister_device(ts.input); diff --git a/drivers/input/touchscreen/zforce_ts.c b/drivers/input/touchscreen/zforce_ts.c index feea85b52fa8..8ba48f5eff7b 100644 --- a/drivers/input/touchscreen/zforce_ts.c +++ b/drivers/input/touchscreen/zforce_ts.c @@ -29,6 +29,8 @@ #include <linux/sysfs.h> #include <linux/input/mt.h> #include <linux/platform_data/zforce_ts.h> +#include <linux/regulator/consumer.h> +#include <linux/delay.h> #include <linux/of.h> #include <linux/of_gpio.h> @@ -117,6 +119,8 @@ struct zforce_ts { const struct zforce_ts_platdata *pdata; char phys[32]; + struct regulator *reg_vdd; + bool suspending; bool suspended; bool boot_complete; @@ -690,6 +694,11 @@ static void zforce_reset(void *data) struct zforce_ts *ts = data; gpio_set_value(ts->pdata->gpio_rst, 0); + + udelay(10); + + if (!IS_ERR(ts->reg_vdd)) + regulator_disable(ts->reg_vdd); } static struct zforce_ts_platdata *zforce_parse_dt(struct device *dev) @@ -765,10 +774,32 @@ static int zforce_probe(struct i2c_client *client, return ret; } + ts->reg_vdd = devm_regulator_get_optional(&client->dev, "vdd"); + if (IS_ERR(ts->reg_vdd)) { + ret = PTR_ERR(ts->reg_vdd); + if (ret == -EPROBE_DEFER) + return ret; + } else { + ret = regulator_enable(ts->reg_vdd); + if (ret) + return ret; + + /* + * according to datasheet add 100us grace time after regular + * regulator enable delay. + */ + udelay(100); + } + ret = devm_add_action(&client->dev, zforce_reset, ts); if (ret) { dev_err(&client->dev, "failed to register reset action, %d\n", ret); + + /* hereafter the regulator will be disabled by the action */ + if (!IS_ERR(ts->reg_vdd)) + regulator_disable(ts->reg_vdd); + return ret; } diff --git a/drivers/platform/chrome/chromeos_laptop.c b/drivers/platform/chrome/chromeos_laptop.c index 7f1a2e2711bd..67b316b2a2bd 100644 --- a/drivers/platform/chrome/chromeos_laptop.c +++ b/drivers/platform/chrome/chromeos_laptop.c @@ -97,8 +97,6 @@ static struct mxt_platform_data atmel_224s_tp_platform_data = { .irqflags = IRQF_TRIGGER_FALLING, .t19_num_keys = ARRAY_SIZE(mxt_t19_keys), .t19_keymap = mxt_t19_keys, - .config = NULL, - .config_length = 0, }; static struct i2c_board_info atmel_224s_tp_device = { @@ -109,8 +107,6 @@ static struct i2c_board_info atmel_224s_tp_device = { static struct mxt_platform_data atmel_1664s_platform_data = { .irqflags = IRQF_TRIGGER_FALLING, - .config = NULL, - .config_length = 0, }; static struct i2c_board_info atmel_1664s_device = { |