summaryrefslogtreecommitdiff
path: root/drivers
diff options
context:
space:
mode:
Diffstat (limited to 'drivers')
-rw-r--r--drivers/ata/Kconfig11
-rw-r--r--drivers/ata/Makefile2
-rw-r--r--drivers/ata/pata_pxa.c411
-rw-r--r--drivers/dma/Kconfig2
-rw-r--r--drivers/dma/shdma.c8
-rw-r--r--drivers/i2c/busses/Kconfig13
-rw-r--r--drivers/i2c/busses/i2c-sh_mobile.c121
-rw-r--r--drivers/net/irda/sh_irda.c6
-rw-r--r--drivers/pcmcia/Kconfig2
-rw-r--r--drivers/pcmcia/Makefile1
-rw-r--r--drivers/pcmcia/pxa2xx_balloon3.c158
-rw-r--r--drivers/power/wm97xx_battery.c16
-rw-r--r--drivers/rtc/Kconfig9
-rw-r--r--drivers/rtc/rtc-s3c.c44
-rw-r--r--drivers/serial/Kconfig4
-rw-r--r--drivers/serial/s5pv210.c8
-rw-r--r--drivers/serial/samsung.c9
-rw-r--r--drivers/serial/sh-sci.c42
-rw-r--r--drivers/serial/sh-sci.h29
-rw-r--r--drivers/sh/Makefile5
-rw-r--r--drivers/sh/clk-cpg.c58
-rw-r--r--drivers/video/Kconfig15
-rw-r--r--drivers/video/Makefile2
-rw-r--r--drivers/video/sh_mipi_dsi.c505
-rw-r--r--drivers/video/sh_mobile_hdmi.c1028
-rw-r--r--drivers/video/sh_mobile_lcdcfb.c196
26 files changed, 2562 insertions, 143 deletions
diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index 8fae6afd6a3d..65e3e2708371 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -651,6 +651,17 @@ config PATA_VIA
If unsure, say N.
+config PATA_PXA
+ tristate "PXA DMA-capable PATA support"
+ depends on ARCH_PXA
+ help
+ This option enables support for harddrive attached to PXA CPU's bus.
+
+ NOTE: This driver utilizes PXA DMA controller, in case your hardware
+ is not capable of doing MWDMA, use pata_platform instead.
+
+ If unsure, say N.
+
config PATA_WINBOND
tristate "Winbond SL82C105 PATA support"
depends on PCI
diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile
index 6540632bda08..158eaa961b1e 100644
--- a/drivers/ata/Makefile
+++ b/drivers/ata/Makefile
@@ -91,6 +91,8 @@ obj-$(CONFIG_PATA_RZ1000) += pata_rz1000.o
obj-$(CONFIG_PATA_SAMSUNG_CF) += pata_samsung_cf.o
obj-$(CONFIG_PATA_WINBOND_VLB) += pata_winbond.o
+obj-$(CONFIG_PATA_PXA) += pata_pxa.o
+
# Should be last but two libata driver
obj-$(CONFIG_PATA_ACPI) += pata_acpi.o
# Should be last but one libata driver
diff --git a/drivers/ata/pata_pxa.c b/drivers/ata/pata_pxa.c
new file mode 100644
index 000000000000..1898c6ed4b4e
--- /dev/null
+++ b/drivers/ata/pata_pxa.c
@@ -0,0 +1,411 @@
+/*
+ * Generic PXA PATA driver
+ *
+ * Copyright (C) 2010 Marek Vasut <marek.vasut@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING. If not, write to
+ * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/blkdev.h>
+#include <linux/ata.h>
+#include <linux/libata.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <linux/slab.h>
+#include <linux/completion.h>
+
+#include <scsi/scsi_host.h>
+
+#include <mach/pxa2xx-regs.h>
+#include <mach/pata_pxa.h>
+#include <mach/dma.h>
+
+#define DRV_NAME "pata_pxa"
+#define DRV_VERSION "0.1"
+
+struct pata_pxa_data {
+ uint32_t dma_channel;
+ struct pxa_dma_desc *dma_desc;
+ dma_addr_t dma_desc_addr;
+ uint32_t dma_desc_id;
+
+ /* DMA IO physical address */
+ uint32_t dma_io_addr;
+ /* PXA DREQ<0:2> pin selector */
+ uint32_t dma_dreq;
+ /* DMA DCSR register value */
+ uint32_t dma_dcsr;
+
+ struct completion dma_done;
+};
+
+/*
+ * Setup the DMA descriptors. The size is transfer capped at 4k per descriptor,
+ * if the transfer is longer, it is split into multiple chained descriptors.
+ */
+static void pxa_load_dmac(struct scatterlist *sg, struct ata_queued_cmd *qc)
+{
+ struct pata_pxa_data *pd = qc->ap->private_data;
+
+ uint32_t cpu_len, seg_len;
+ dma_addr_t cpu_addr;
+
+ cpu_addr = sg_dma_address(sg);
+ cpu_len = sg_dma_len(sg);
+
+ do {
+ seg_len = (cpu_len > 0x1000) ? 0x1000 : cpu_len;
+
+ pd->dma_desc[pd->dma_desc_id].ddadr = pd->dma_desc_addr +
+ ((pd->dma_desc_id + 1) * sizeof(struct pxa_dma_desc));
+
+ pd->dma_desc[pd->dma_desc_id].dcmd = DCMD_BURST32 |
+ DCMD_WIDTH2 | (DCMD_LENGTH & seg_len);
+
+ if (qc->tf.flags & ATA_TFLAG_WRITE) {
+ pd->dma_desc[pd->dma_desc_id].dsadr = cpu_addr;
+ pd->dma_desc[pd->dma_desc_id].dtadr = pd->dma_io_addr;
+ pd->dma_desc[pd->dma_desc_id].dcmd |= DCMD_INCSRCADDR |
+ DCMD_FLOWTRG;
+ } else {
+ pd->dma_desc[pd->dma_desc_id].dsadr = pd->dma_io_addr;
+ pd->dma_desc[pd->dma_desc_id].dtadr = cpu_addr;
+ pd->dma_desc[pd->dma_desc_id].dcmd |= DCMD_INCTRGADDR |
+ DCMD_FLOWSRC;
+ }
+
+ cpu_len -= seg_len;
+ cpu_addr += seg_len;
+ pd->dma_desc_id++;
+
+ } while (cpu_len);
+
+ /* Should not happen */
+ if (seg_len & 0x1f)
+ DALGN |= (1 << pd->dma_dreq);
+}
+
+/*
+ * Prepare taskfile for submission.
+ */
+static void pxa_qc_prep(struct ata_queued_cmd *qc)
+{
+ struct pata_pxa_data *pd = qc->ap->private_data;
+ int si = 0;
+ struct scatterlist *sg;
+
+ if (!(qc->flags & ATA_QCFLAG_DMAMAP))
+ return;
+
+ pd->dma_desc_id = 0;
+
+ DCSR(pd->dma_channel) = 0;
+ DALGN &= ~(1 << pd->dma_dreq);
+
+ for_each_sg(qc->sg, sg, qc->n_elem, si)
+ pxa_load_dmac(sg, qc);
+
+ pd->dma_desc[pd->dma_desc_id - 1].ddadr = DDADR_STOP;
+
+ /* Fire IRQ only at the end of last block */
+ pd->dma_desc[pd->dma_desc_id - 1].dcmd |= DCMD_ENDIRQEN;
+
+ DDADR(pd->dma_channel) = pd->dma_desc_addr;
+ DRCMR(pd->dma_dreq) = DRCMR_MAPVLD | pd->dma_channel;
+
+}
+
+/*
+ * Configure the DMA controller, load the DMA descriptors, but don't start the
+ * DMA controller yet. Only issue the ATA command.
+ */
+static void pxa_bmdma_setup(struct ata_queued_cmd *qc)
+{
+ qc->ap->ops->sff_exec_command(qc->ap, &qc->tf);
+}
+
+/*
+ * Execute the DMA transfer.
+ */
+static void pxa_bmdma_start(struct ata_queued_cmd *qc)
+{
+ struct pata_pxa_data *pd = qc->ap->private_data;
+ init_completion(&pd->dma_done);
+ DCSR(pd->dma_channel) = DCSR_RUN;
+}
+
+/*
+ * Wait until the DMA transfer completes, then stop the DMA controller.
+ */
+static void pxa_bmdma_stop(struct ata_queued_cmd *qc)
+{
+ struct pata_pxa_data *pd = qc->ap->private_data;
+
+ if ((DCSR(pd->dma_channel) & DCSR_RUN) &&
+ wait_for_completion_timeout(&pd->dma_done, HZ))
+ dev_err(qc->ap->dev, "Timeout waiting for DMA completion!");
+
+ DCSR(pd->dma_channel) = 0;
+}
+
+/*
+ * Read DMA status. The bmdma_stop() will take care of properly finishing the
+ * DMA transfer so we always have DMA-complete interrupt here.
+ */
+static unsigned char pxa_bmdma_status(struct ata_port *ap)
+{
+ struct pata_pxa_data *pd = ap->private_data;
+ unsigned char ret = ATA_DMA_INTR;
+
+ if (pd->dma_dcsr & DCSR_BUSERR)
+ ret |= ATA_DMA_ERR;
+
+ return ret;
+}
+
+/*
+ * No IRQ register present so we do nothing.
+ */
+static void pxa_irq_clear(struct ata_port *ap)
+{
+}
+
+/*
+ * Check for ATAPI DMA. ATAPI DMA is unsupported by this driver. It's still
+ * unclear why ATAPI has DMA issues.
+ */
+static int pxa_check_atapi_dma(struct ata_queued_cmd *qc)
+{
+ return -EOPNOTSUPP;
+}
+
+static struct scsi_host_template pxa_ata_sht = {
+ ATA_BMDMA_SHT(DRV_NAME),
+};
+
+static struct ata_port_operations pxa_ata_port_ops = {
+ .inherits = &ata_bmdma_port_ops,
+ .cable_detect = ata_cable_40wire,
+
+ .bmdma_setup = pxa_bmdma_setup,
+ .bmdma_start = pxa_bmdma_start,
+ .bmdma_stop = pxa_bmdma_stop,
+ .bmdma_status = pxa_bmdma_status,
+
+ .check_atapi_dma = pxa_check_atapi_dma,
+
+ .sff_irq_clear = pxa_irq_clear,
+
+ .qc_prep = pxa_qc_prep,
+};
+
+/*
+ * DMA interrupt handler.
+ */
+static void pxa_ata_dma_irq(int dma, void *port)
+{
+ struct ata_port *ap = port;
+ struct pata_pxa_data *pd = ap->private_data;
+
+ pd->dma_dcsr = DCSR(dma);
+ DCSR(dma) = pd->dma_dcsr;
+
+ if (pd->dma_dcsr & DCSR_STOPSTATE)
+ complete(&pd->dma_done);
+}
+
+static int __devinit pxa_ata_probe(struct platform_device *pdev)
+{
+ struct ata_host *host;
+ struct ata_port *ap;
+ struct pata_pxa_data *data;
+ struct resource *cmd_res;
+ struct resource *ctl_res;
+ struct resource *dma_res;
+ struct resource *irq_res;
+ struct pata_pxa_pdata *pdata = pdev->dev.platform_data;
+ int ret = 0;
+
+ /*
+ * Resource validation, three resources are needed:
+ * - CMD port base address
+ * - CTL port base address
+ * - DMA port base address
+ * - IRQ pin
+ */
+ if (pdev->num_resources != 4) {
+ dev_err(&pdev->dev, "invalid number of resources\n");
+ return -EINVAL;
+ }
+
+ /*
+ * CMD port base address
+ */
+ cmd_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (unlikely(cmd_res == NULL))
+ return -EINVAL;
+
+ /*
+ * CTL port base address
+ */
+ ctl_res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+ if (unlikely(ctl_res == NULL))
+ return -EINVAL;
+
+ /*
+ * DMA port base address
+ */
+ dma_res = platform_get_resource(pdev, IORESOURCE_DMA, 0);
+ if (unlikely(dma_res == NULL))
+ return -EINVAL;
+
+ /*
+ * IRQ pin
+ */
+ irq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+ if (unlikely(irq_res == NULL))
+ return -EINVAL;
+
+ /*
+ * Allocate the host
+ */
+ host = ata_host_alloc(&pdev->dev, 1);
+ if (!host)
+ return -ENOMEM;
+
+ ap = host->ports[0];
+ ap->ops = &pxa_ata_port_ops;
+ ap->pio_mask = ATA_PIO4;
+ ap->mwdma_mask = ATA_MWDMA2;
+ ap->flags = ATA_FLAG_MMIO;
+
+ ap->ioaddr.cmd_addr = devm_ioremap(&pdev->dev, cmd_res->start,
+ resource_size(cmd_res));
+ ap->ioaddr.ctl_addr = devm_ioremap(&pdev->dev, ctl_res->start,
+ resource_size(ctl_res));
+ ap->ioaddr.bmdma_addr = devm_ioremap(&pdev->dev, dma_res->start,
+ resource_size(dma_res));
+
+ /*
+ * Adjust register offsets
+ */
+ ap->ioaddr.altstatus_addr = ap->ioaddr.ctl_addr;
+ ap->ioaddr.data_addr = ap->ioaddr.cmd_addr +
+ (ATA_REG_DATA << pdata->reg_shift);
+ ap->ioaddr.error_addr = ap->ioaddr.cmd_addr +
+ (ATA_REG_ERR << pdata->reg_shift);
+ ap->ioaddr.feature_addr = ap->ioaddr.cmd_addr +
+ (ATA_REG_FEATURE << pdata->reg_shift);
+ ap->ioaddr.nsect_addr = ap->ioaddr.cmd_addr +
+ (ATA_REG_NSECT << pdata->reg_shift);
+ ap->ioaddr.lbal_addr = ap->ioaddr.cmd_addr +
+ (ATA_REG_LBAL << pdata->reg_shift);
+ ap->ioaddr.lbam_addr = ap->ioaddr.cmd_addr +
+ (ATA_REG_LBAM << pdata->reg_shift);
+ ap->ioaddr.lbah_addr = ap->ioaddr.cmd_addr +
+ (ATA_REG_LBAH << pdata->reg_shift);
+ ap->ioaddr.device_addr = ap->ioaddr.cmd_addr +
+ (ATA_REG_DEVICE << pdata->reg_shift);
+ ap->ioaddr.status_addr = ap->ioaddr.cmd_addr +
+ (ATA_REG_STATUS << pdata->reg_shift);
+ ap->ioaddr.command_addr = ap->ioaddr.cmd_addr +
+ (ATA_REG_CMD << pdata->reg_shift);
+
+ /*
+ * Allocate and load driver's internal data structure
+ */
+ data = devm_kzalloc(&pdev->dev, sizeof(struct pata_pxa_data),
+ GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ ap->private_data = data;
+ data->dma_dreq = pdata->dma_dreq;
+ data->dma_io_addr = dma_res->start;
+
+ /*
+ * Allocate space for the DMA descriptors
+ */
+ data->dma_desc = dmam_alloc_coherent(&pdev->dev, PAGE_SIZE,
+ &data->dma_desc_addr, GFP_KERNEL);
+ if (!data->dma_desc)
+ return -EINVAL;
+
+ /*
+ * Request the DMA channel
+ */
+ data->dma_channel = pxa_request_dma(DRV_NAME, DMA_PRIO_LOW,
+ pxa_ata_dma_irq, ap);
+ if (data->dma_channel < 0)
+ return -EBUSY;
+
+ /*
+ * Stop and clear the DMA channel
+ */
+ DCSR(data->dma_channel) = 0;
+
+ /*
+ * Activate the ATA host
+ */
+ ret = ata_host_activate(host, irq_res->start, ata_sff_interrupt,
+ pdata->irq_flags, &pxa_ata_sht);
+ if (ret)
+ pxa_free_dma(data->dma_channel);
+
+ return ret;
+}
+
+static int __devexit pxa_ata_remove(struct platform_device *pdev)
+{
+ struct ata_host *host = dev_get_drvdata(&pdev->dev);
+ struct pata_pxa_data *data = host->ports[0]->private_data;
+
+ pxa_free_dma(data->dma_channel);
+
+ ata_host_detach(host);
+
+ return 0;
+}
+
+static struct platform_driver pxa_ata_driver = {
+ .probe = pxa_ata_probe,
+ .remove = __devexit_p(pxa_ata_remove),
+ .driver = {
+ .name = DRV_NAME,
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __init pxa_ata_init(void)
+{
+ return platform_driver_register(&pxa_ata_driver);
+}
+
+static void __exit pxa_ata_exit(void)
+{
+ platform_driver_unregister(&pxa_ata_driver);
+}
+
+module_init(pxa_ata_init);
+module_exit(pxa_ata_exit);
+
+MODULE_AUTHOR("Marek Vasut <marek.vasut@gmail.com>");
+MODULE_DESCRIPTION("DMA-capable driver for PATA on PXA CPU");
+MODULE_LICENSE("GPL");
+MODULE_VERSION(DRV_VERSION);
+MODULE_ALIAS("platform:" DRV_NAME);
diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig
index fed57634b6c1..9520cf02edc8 100644
--- a/drivers/dma/Kconfig
+++ b/drivers/dma/Kconfig
@@ -141,7 +141,7 @@ config TXX9_DMAC
config SH_DMAE
tristate "Renesas SuperH DMAC support"
- depends on SUPERH && SH_DMA
+ depends on (SUPERH && SH_DMA) || (ARM && ARCH_SHMOBILE)
depends on !SH_DMA_API
select DMA_ENGINE
help
diff --git a/drivers/dma/shdma.c b/drivers/dma/shdma.c
index a2a519fd2a24..fb64cf36ba61 100644
--- a/drivers/dma/shdma.c
+++ b/drivers/dma/shdma.c
@@ -816,7 +816,7 @@ static irqreturn_t sh_dmae_interrupt(int irq, void *data)
return ret;
}
-#if defined(CONFIG_CPU_SH4)
+#if defined(CONFIG_CPU_SH4) || defined(CONFIG_ARCH_SHMOBILE)
static irqreturn_t sh_dmae_err(int irq, void *data)
{
struct sh_dmae_device *shdev = (struct sh_dmae_device *)data;
@@ -1057,7 +1057,7 @@ static int __init sh_dmae_probe(struct platform_device *pdev)
/* Default transfer size of 32 bytes requires 32-byte alignment */
shdev->common.copy_align = LOG2_DEFAULT_XFER_SIZE;
-#if defined(CONFIG_CPU_SH4)
+#if defined(CONFIG_CPU_SH4) || defined(CONFIG_ARCH_SHMOBILE)
chanirq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 1);
if (!chanirq_res)
@@ -1082,7 +1082,7 @@ static int __init sh_dmae_probe(struct platform_device *pdev)
#else
chanirq_res = errirq_res;
-#endif /* CONFIG_CPU_SH4 */
+#endif /* CONFIG_CPU_SH4 || CONFIG_ARCH_SHMOBILE */
if (chanirq_res->start == chanirq_res->end &&
!platform_get_resource(pdev, IORESOURCE_IRQ, 1)) {
@@ -1129,7 +1129,7 @@ static int __init sh_dmae_probe(struct platform_device *pdev)
chan_probe_err:
sh_dmae_chan_remove(shdev);
eirqres:
-#if defined(CONFIG_CPU_SH4)
+#if defined(CONFIG_CPU_SH4) || defined(CONFIG_ARCH_SHMOBILE)
free_irq(errirq, shdev);
eirq_err:
#endif
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index bceafbfa7268..15a9702e2941 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -521,12 +521,19 @@ config I2C_PXA_SLAVE
is necessary for systems where the PXA may be a target on the
I2C bus.
+config HAVE_S3C2410_I2C
+ bool
+ help
+ This will include I2C support for Samsung SoCs. If you want to
+ include I2C support for any machine, kindly select this in the
+ respective Kconfig file.
+
config I2C_S3C2410
tristate "S3C2410 I2C Driver"
- depends on ARCH_S3C2410 || ARCH_S3C64XX
+ depends on HAVE_S3C2410_I2C
help
Say Y here to include support for I2C controller in the
- Samsung S3C2410 based System-on-Chip devices.
+ Samsung SoCs.
config I2C_S6000
tristate "S6000 I2C support"
@@ -549,7 +556,7 @@ config I2C_SH7760
config I2C_SH_MOBILE
tristate "SuperH Mobile I2C Controller"
- depends on SUPERH
+ depends on SUPERH || ARCH_SHMOBILE
help
If you say yes to this option, support will be included for the
built-in I2C interface on the Renesas SH-Mobile processor.
diff --git a/drivers/i2c/busses/i2c-sh_mobile.c b/drivers/i2c/busses/i2c-sh_mobile.c
index ffb405d7c6f2..598c49acaeb5 100644
--- a/drivers/i2c/busses/i2c-sh_mobile.c
+++ b/drivers/i2c/busses/i2c-sh_mobile.c
@@ -119,8 +119,10 @@ struct sh_mobile_i2c_data {
struct i2c_adapter adap;
struct clk *clk;
+ u_int8_t icic;
u_int8_t iccl;
u_int8_t icch;
+ u_int8_t flags;
spinlock_t lock;
wait_queue_head_t wait;
@@ -129,15 +131,17 @@ struct sh_mobile_i2c_data {
int sr;
};
+#define IIC_FLAG_HAS_ICIC67 (1 << 0)
+
#define NORMAL_SPEED 100000 /* FAST_SPEED 400000 */
/* Register offsets */
-#define ICDR(pd) (pd->reg + 0x00)
-#define ICCR(pd) (pd->reg + 0x04)
-#define ICSR(pd) (pd->reg + 0x08)
-#define ICIC(pd) (pd->reg + 0x0c)
-#define ICCL(pd) (pd->reg + 0x10)
-#define ICCH(pd) (pd->reg + 0x14)
+#define ICDR 0x00
+#define ICCR 0x04
+#define ICSR 0x08
+#define ICIC 0x0c
+#define ICCL 0x10
+#define ICCH 0x14
/* Register bits */
#define ICCR_ICE 0x80
@@ -155,11 +159,32 @@ struct sh_mobile_i2c_data {
#define ICSR_WAIT 0x02
#define ICSR_DTE 0x01
+#define ICIC_ICCLB8 0x80
+#define ICIC_ICCHB8 0x40
#define ICIC_ALE 0x08
#define ICIC_TACKE 0x04
#define ICIC_WAITE 0x02
#define ICIC_DTEE 0x01
+static void iic_wr(struct sh_mobile_i2c_data *pd, int offs, unsigned char data)
+{
+ if (offs == ICIC)
+ data |= pd->icic;
+
+ iowrite8(data, pd->reg + offs);
+}
+
+static unsigned char iic_rd(struct sh_mobile_i2c_data *pd, int offs)
+{
+ return ioread8(pd->reg + offs);
+}
+
+static void iic_set_clr(struct sh_mobile_i2c_data *pd, int offs,
+ unsigned char set, unsigned char clr)
+{
+ iic_wr(pd, offs, (iic_rd(pd, offs) | set) & ~clr);
+}
+
static void activate_ch(struct sh_mobile_i2c_data *pd)
{
unsigned long i2c_clk;
@@ -187,6 +212,14 @@ static void activate_ch(struct sh_mobile_i2c_data *pd)
else
pd->iccl = (u_int8_t)(num/denom);
+ /* one more bit of ICCL in ICIC */
+ if (pd->flags & IIC_FLAG_HAS_ICIC67) {
+ if ((num/denom) > 0xff)
+ pd->icic |= ICIC_ICCLB8;
+ else
+ pd->icic &= ~ICIC_ICCLB8;
+ }
+
/* Calculate the value for icch. From the data sheet:
icch = (p clock / transfer rate) * (H / (L + H)) */
num = i2c_clk * 4;
@@ -196,25 +229,33 @@ static void activate_ch(struct sh_mobile_i2c_data *pd)
else
pd->icch = (u_int8_t)(num/denom);
+ /* one more bit of ICCH in ICIC */
+ if (pd->flags & IIC_FLAG_HAS_ICIC67) {
+ if ((num/denom) > 0xff)
+ pd->icic |= ICIC_ICCHB8;
+ else
+ pd->icic &= ~ICIC_ICCHB8;
+ }
+
/* Enable channel and configure rx ack */
- iowrite8(ioread8(ICCR(pd)) | ICCR_ICE, ICCR(pd));
+ iic_set_clr(pd, ICCR, ICCR_ICE, 0);
/* Mask all interrupts */
- iowrite8(0, ICIC(pd));
+ iic_wr(pd, ICIC, 0);
/* Set the clock */
- iowrite8(pd->iccl, ICCL(pd));
- iowrite8(pd->icch, ICCH(pd));
+ iic_wr(pd, ICCL, pd->iccl);
+ iic_wr(pd, ICCH, pd->icch);
}
static void deactivate_ch(struct sh_mobile_i2c_data *pd)
{
/* Clear/disable interrupts */
- iowrite8(0, ICSR(pd));
- iowrite8(0, ICIC(pd));
+ iic_wr(pd, ICSR, 0);
+ iic_wr(pd, ICIC, 0);
/* Disable channel */
- iowrite8(ioread8(ICCR(pd)) & ~ICCR_ICE, ICCR(pd));
+ iic_set_clr(pd, ICCR, 0, ICCR_ICE);
/* Disable clock and mark device as idle */
clk_disable(pd->clk);
@@ -233,35 +274,35 @@ static unsigned char i2c_op(struct sh_mobile_i2c_data *pd,
switch (op) {
case OP_START: /* issue start and trigger DTE interrupt */
- iowrite8(0x94, ICCR(pd));
+ iic_wr(pd, ICCR, 0x94);
break;
case OP_TX_FIRST: /* disable DTE interrupt and write data */
- iowrite8(ICIC_WAITE | ICIC_ALE | ICIC_TACKE, ICIC(pd));
- iowrite8(data, ICDR(pd));
+ iic_wr(pd, ICIC, ICIC_WAITE | ICIC_ALE | ICIC_TACKE);
+ iic_wr(pd, ICDR, data);
break;
case OP_TX: /* write data */
- iowrite8(data, ICDR(pd));
+ iic_wr(pd, ICDR, data);
break;
case OP_TX_STOP: /* write data and issue a stop afterwards */
- iowrite8(data, ICDR(pd));
- iowrite8(0x90, ICCR(pd));
+ iic_wr(pd, ICDR, data);
+ iic_wr(pd, ICCR, 0x90);
break;
case OP_TX_TO_RX: /* select read mode */
- iowrite8(0x81, ICCR(pd));
+ iic_wr(pd, ICCR, 0x81);
break;
case OP_RX: /* just read data */
- ret = ioread8(ICDR(pd));
+ ret = iic_rd(pd, ICDR);
break;
case OP_RX_STOP: /* enable DTE interrupt, issue stop */
- iowrite8(ICIC_DTEE | ICIC_WAITE | ICIC_ALE | ICIC_TACKE,
- ICIC(pd));
- iowrite8(0xc0, ICCR(pd));
+ iic_wr(pd, ICIC,
+ ICIC_DTEE | ICIC_WAITE | ICIC_ALE | ICIC_TACKE);
+ iic_wr(pd, ICCR, 0xc0);
break;
case OP_RX_STOP_DATA: /* enable DTE interrupt, read data, issue stop */
- iowrite8(ICIC_DTEE | ICIC_WAITE | ICIC_ALE | ICIC_TACKE,
- ICIC(pd));
- ret = ioread8(ICDR(pd));
- iowrite8(0xc0, ICCR(pd));
+ iic_wr(pd, ICIC,
+ ICIC_DTEE | ICIC_WAITE | ICIC_ALE | ICIC_TACKE);
+ ret = iic_rd(pd, ICDR);
+ iic_wr(pd, ICCR, 0xc0);
break;
}
@@ -367,7 +408,7 @@ static irqreturn_t sh_mobile_i2c_isr(int irq, void *dev_id)
unsigned char sr;
int wakeup;
- sr = ioread8(ICSR(pd));
+ sr = iic_rd(pd, ICSR);
pd->sr |= sr; /* remember state */
dev_dbg(pd->dev, "i2c_isr 0x%02x 0x%02x %s %d %d!\n", sr, pd->sr,
@@ -376,7 +417,7 @@ static irqreturn_t sh_mobile_i2c_isr(int irq, void *dev_id)
if (sr & (ICSR_AL | ICSR_TACK)) {
/* don't interrupt transaction - continue to issue stop */
- iowrite8(sr & ~(ICSR_AL | ICSR_TACK), ICSR(pd));
+ iic_wr(pd, ICSR, sr & ~(ICSR_AL | ICSR_TACK));
wakeup = 0;
} else if (pd->msg->flags & I2C_M_RD)
wakeup = sh_mobile_i2c_isr_rx(pd);
@@ -384,7 +425,7 @@ static irqreturn_t sh_mobile_i2c_isr(int irq, void *dev_id)
wakeup = sh_mobile_i2c_isr_tx(pd);
if (sr & ICSR_WAIT) /* TODO: add delay here to support slow acks */
- iowrite8(sr & ~ICSR_WAIT, ICSR(pd));
+ iic_wr(pd, ICSR, sr & ~ICSR_WAIT);
if (wakeup) {
pd->sr |= SW_DONE;
@@ -402,21 +443,21 @@ static int start_ch(struct sh_mobile_i2c_data *pd, struct i2c_msg *usr_msg)
}
/* Initialize channel registers */
- iowrite8(ioread8(ICCR(pd)) & ~ICCR_ICE, ICCR(pd));
+ iic_set_clr(pd, ICCR, 0, ICCR_ICE);
/* Enable channel and configure rx ack */
- iowrite8(ioread8(ICCR(pd)) | ICCR_ICE, ICCR(pd));
+ iic_set_clr(pd, ICCR, ICCR_ICE, 0);
/* Set the clock */
- iowrite8(pd->iccl, ICCL(pd));
- iowrite8(pd->icch, ICCH(pd));
+ iic_wr(pd, ICCL, pd->iccl);
+ iic_wr(pd, ICCH, pd->icch);
pd->msg = usr_msg;
pd->pos = -1;
pd->sr = 0;
/* Enable all interrupts to begin with */
- iowrite8(ICIC_WAITE | ICIC_ALE | ICIC_TACKE | ICIC_DTEE, ICIC(pd));
+ iic_wr(pd, ICIC, ICIC_DTEE | ICIC_WAITE | ICIC_ALE | ICIC_TACKE);
return 0;
}
@@ -451,7 +492,7 @@ static int sh_mobile_i2c_xfer(struct i2c_adapter *adapter,
retry_count = 1000;
again:
- val = ioread8(ICSR(pd));
+ val = iic_rd(pd, ICSR);
dev_dbg(pd->dev, "val 0x%02x pd->sr 0x%02x\n", val, pd->sr);
@@ -576,6 +617,12 @@ static int sh_mobile_i2c_probe(struct platform_device *dev)
goto err_irq;
}
+ /* The IIC blocks on SH-Mobile ARM processors
+ * come with two new bits in ICIC.
+ */
+ if (size > 0x17)
+ pd->flags |= IIC_FLAG_HAS_ICIC67;
+
/* Enable Runtime PM for this device.
*
* Also tell the Runtime PM core to ignore children
diff --git a/drivers/net/irda/sh_irda.c b/drivers/net/irda/sh_irda.c
index edd5666f0ffb..9e3f4f54281d 100644
--- a/drivers/net/irda/sh_irda.c
+++ b/drivers/net/irda/sh_irda.c
@@ -748,7 +748,6 @@ static int __devinit sh_irda_probe(struct platform_device *pdev)
struct net_device *ndev;
struct sh_irda_self *self;
struct resource *res;
- char clk_name[8];
int irq;
int err = -ENOMEM;
@@ -775,10 +774,9 @@ static int __devinit sh_irda_probe(struct platform_device *pdev)
if (err)
goto err_mem_2;
- snprintf(clk_name, sizeof(clk_name), "irda%d", pdev->id);
- self->clk = clk_get(&pdev->dev, clk_name);
+ self->clk = clk_get(&pdev->dev, NULL);
if (IS_ERR(self->clk)) {
- dev_err(&pdev->dev, "cannot get clock \"%s\"\n", clk_name);
+ dev_err(&pdev->dev, "cannot get irda clock\n");
goto err_mem_3;
}
diff --git a/drivers/pcmcia/Kconfig b/drivers/pcmcia/Kconfig
index c988514eb551..c80a7a6e7698 100644
--- a/drivers/pcmcia/Kconfig
+++ b/drivers/pcmcia/Kconfig
@@ -215,7 +215,7 @@ config PCMCIA_PXA2XX
depends on (ARCH_LUBBOCK || MACH_MAINSTONE || PXA_SHARPSL \
|| MACH_ARMCORE || ARCH_PXA_PALM || TRIZEPS_PCMCIA \
|| ARCOM_PCMCIA || ARCH_PXA_ESERIES || MACH_STARGATE2 \
- || MACH_VPAC270)
+ || MACH_VPAC270 || MACH_BALLOON3)
select PCMCIA_SOC_COMMON
help
Say Y here to include support for the PXA2xx PCMCIA controller
diff --git a/drivers/pcmcia/Makefile b/drivers/pcmcia/Makefile
index 7a2b1604bf1c..8d9386a22eb3 100644
--- a/drivers/pcmcia/Makefile
+++ b/drivers/pcmcia/Makefile
@@ -69,6 +69,7 @@ pxa2xx-obj-$(CONFIG_MACH_PALMLD) += pxa2xx_palmld.o
pxa2xx-obj-$(CONFIG_MACH_E740) += pxa2xx_e740.o
pxa2xx-obj-$(CONFIG_MACH_STARGATE2) += pxa2xx_stargate2.o
pxa2xx-obj-$(CONFIG_MACH_VPAC270) += pxa2xx_vpac270.o
+pxa2xx-obj-$(CONFIG_MACH_BALLOON3) += pxa2xx_balloon3.o
obj-$(CONFIG_PCMCIA_PXA2XX) += pxa2xx_base.o $(pxa2xx-obj-y)
diff --git a/drivers/pcmcia/pxa2xx_balloon3.c b/drivers/pcmcia/pxa2xx_balloon3.c
new file mode 100644
index 000000000000..dbbdd0063202
--- /dev/null
+++ b/drivers/pcmcia/pxa2xx_balloon3.c
@@ -0,0 +1,158 @@
+/*
+ * linux/drivers/pcmcia/pxa2xx_balloon3.c
+ *
+ * Balloon3 PCMCIA specific routines.
+ *
+ * Author: Nick Bane
+ * Created: June, 2006
+ * Copyright: Toby Churchill Ltd
+ * Derived from pxa2xx_mainstone.c, by Nico Pitre
+ *
+ * Various modification by Marek Vasut <marek.vasut@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/gpio.h>
+#include <linux/errno.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+
+#include <mach/balloon3.h>
+
+#include "soc_common.h"
+
+/*
+ * These are a list of interrupt sources that provokes a polled
+ * check of status
+ */
+static struct pcmcia_irqs irqs[] = {
+ { 0, BALLOON3_S0_CD_IRQ, "PCMCIA0 CD" },
+ { 0, BALLOON3_BP_NSTSCHG_IRQ, "PCMCIA0 STSCHG" },
+};
+
+static int balloon3_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
+{
+ uint16_t ver;
+ int ret;
+ static void __iomem *fpga_ver;
+
+ ver = __raw_readw(BALLOON3_FPGA_VER);
+ if (ver > 0x0201)
+ pr_warn("The FPGA code, version 0x%04x, is newer than rel-0.3. "
+ "PCMCIA/CF support might be broken in this version!",
+ ver);
+
+ skt->socket.pci_irq = BALLOON3_BP_CF_NRDY_IRQ;
+ return soc_pcmcia_request_irqs(skt, irqs, ARRAY_SIZE(irqs));
+}
+
+static void balloon3_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt)
+{
+ soc_pcmcia_free_irqs(skt, irqs, ARRAY_SIZE(irqs));
+}
+
+static unsigned long balloon3_pcmcia_status[2] = {
+ BALLOON3_CF_nSTSCHG_BVD1,
+ BALLOON3_CF_nSTSCHG_BVD1
+};
+
+static void balloon3_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
+ struct pcmcia_state *state)
+{
+ uint16_t status;
+ int flip;
+
+ /* This actually reads the STATUS register */
+ status = __raw_readw(BALLOON3_CF_STATUS_REG);
+ flip = (status ^ balloon3_pcmcia_status[skt->nr])
+ & BALLOON3_CF_nSTSCHG_BVD1;
+ /*
+ * Workaround for STSCHG which can't be deasserted:
+ * We therefore disable/enable corresponding IRQs
+ * as needed to avoid IRQ locks.
+ */
+ if (flip) {
+ balloon3_pcmcia_status[skt->nr] = status;
+ if (status & BALLOON3_CF_nSTSCHG_BVD1)
+ enable_irq(BALLOON3_BP_NSTSCHG_IRQ);
+ else
+ disable_irq(BALLOON3_BP_NSTSCHG_IRQ);
+ }
+
+ state->detect = !gpio_get_value(BALLOON3_GPIO_S0_CD);
+ state->ready = !!(status & BALLOON3_CF_nIRQ);
+ state->bvd1 = !!(status & BALLOON3_CF_nSTSCHG_BVD1);
+ state->bvd2 = 0; /* not available */
+ state->vs_3v = 1; /* Always true its a CF card */
+ state->vs_Xv = 0; /* not available */
+ state->wrprot = 0; /* not available */
+}
+
+static int balloon3_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
+ const socket_state_t *state)
+{
+ __raw_writew((state->flags & SS_RESET) ? BALLOON3_CF_RESET : 0,
+ BALLOON3_CF_CONTROL_REG);
+ return 0;
+}
+
+static void balloon3_pcmcia_socket_init(struct soc_pcmcia_socket *skt)
+{
+}
+
+static void balloon3_pcmcia_socket_suspend(struct soc_pcmcia_socket *skt)
+{
+}
+
+static struct pcmcia_low_level balloon3_pcmcia_ops = {
+ .owner = THIS_MODULE,
+ .hw_init = balloon3_pcmcia_hw_init,
+ .hw_shutdown = balloon3_pcmcia_hw_shutdown,
+ .socket_state = balloon3_pcmcia_socket_state,
+ .configure_socket = balloon3_pcmcia_configure_socket,
+ .socket_init = balloon3_pcmcia_socket_init,
+ .socket_suspend = balloon3_pcmcia_socket_suspend,
+ .first = 0,
+ .nr = 1,
+};
+
+static struct platform_device *balloon3_pcmcia_device;
+
+static int __init balloon3_pcmcia_init(void)
+{
+ int ret;
+
+ balloon3_pcmcia_device = platform_device_alloc("pxa2xx-pcmcia", -1);
+ if (!balloon3_pcmcia_device)
+ return -ENOMEM;
+
+ ret = platform_device_add_data(balloon3_pcmcia_device,
+ &balloon3_pcmcia_ops, sizeof(balloon3_pcmcia_ops));
+
+ if (!ret)
+ ret = platform_device_add(balloon3_pcmcia_device);
+
+ if (ret)
+ platform_device_put(balloon3_pcmcia_device);
+
+ return ret;
+}
+
+static void __exit balloon3_pcmcia_exit(void)
+{
+ platform_device_unregister(balloon3_pcmcia_device);
+}
+
+module_init(balloon3_pcmcia_init);
+module_exit(balloon3_pcmcia_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Nick Bane <nick@cecomputing.co.uk>");
+MODULE_ALIAS("platform:pxa2xx-pcmcia");
+MODULE_DESCRIPTION("Balloon3 board CF/PCMCIA driver");
diff --git a/drivers/power/wm97xx_battery.c b/drivers/power/wm97xx_battery.c
index 4e8afce0c818..5071d85ec12d 100644
--- a/drivers/power/wm97xx_battery.c
+++ b/drivers/power/wm97xx_battery.c
@@ -29,7 +29,6 @@ static DEFINE_MUTEX(bat_lock);
static struct work_struct bat_work;
static struct mutex work_lock;
static int bat_status = POWER_SUPPLY_STATUS_UNKNOWN;
-static struct wm97xx_batt_info *gpdata;
static enum power_supply_property *prop;
static unsigned long wm97xx_read_bat(struct power_supply *bat_ps)
@@ -172,12 +171,6 @@ static int __devinit wm97xx_bat_probe(struct platform_device *dev)
struct wm97xx_pdata *wmdata = dev->dev.platform_data;
struct wm97xx_batt_pdata *pdata;
- if (gpdata) {
- dev_err(&dev->dev, "Do not pass platform_data through "
- "wm97xx_bat_set_pdata!\n");
- return -EINVAL;
- }
-
if (!wmdata) {
dev_err(&dev->dev, "No platform data supplied\n");
return -EINVAL;
@@ -308,15 +301,6 @@ static void __exit wm97xx_bat_exit(void)
platform_driver_unregister(&wm97xx_bat_driver);
}
-/* The interface is deprecated, as well as linux/wm97xx_batt.h */
-void wm97xx_bat_set_pdata(struct wm97xx_batt_info *data);
-
-void wm97xx_bat_set_pdata(struct wm97xx_batt_info *data)
-{
- gpdata = data;
-}
-EXPORT_SYMBOL_GPL(wm97xx_bat_set_pdata);
-
module_init(wm97xx_bat_init);
module_exit(wm97xx_bat_exit);
diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index 4301a6c7ed3b..9238c8f40f03 100644
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -645,9 +645,16 @@ config RTC_DRV_OMAP
DA8xx/OMAP-L13x chips. This driver can also be built as a
module called rtc-omap.
+config HAVE_S3C_RTC
+ bool
+ help
+ This will include RTC support for Samsung SoCs. If
+ you want to include RTC support for any machine, kindly
+ select this in the respective mach-XXXX/Kconfig file.
+
config RTC_DRV_S3C
tristate "Samsung S3C series SoC RTC"
- depends on ARCH_S3C2410 || ARCH_S3C64XX
+ depends on ARCH_S3C2410 || ARCH_S3C64XX || HAVE_S3C_RTC
help
RTC (Realtime Clock) driver for the clock inbuilt into the
Samsung S3C24XX series of SoCs. This can provide periodic
diff --git a/drivers/rtc/rtc-s3c.c b/drivers/rtc/rtc-s3c.c
index 70b68d35f969..a0d3ec89d412 100644
--- a/drivers/rtc/rtc-s3c.c
+++ b/drivers/rtc/rtc-s3c.c
@@ -1,5 +1,8 @@
/* drivers/rtc/rtc-s3c.c
*
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
* Copyright (c) 2004,2006 Simtec Electronics
* Ben Dooks, <ben@simtec.co.uk>
* http://armlinux.simtec.co.uk/
@@ -39,6 +42,7 @@ enum s3c_cpu_type {
static struct resource *s3c_rtc_mem;
+static struct clk *rtc_clk;
static void __iomem *s3c_rtc_base;
static int s3c_rtc_alarmno = NO_IRQ;
static int s3c_rtc_tickno = NO_IRQ;
@@ -53,6 +57,10 @@ static irqreturn_t s3c_rtc_alarmirq(int irq, void *id)
struct rtc_device *rdev = id;
rtc_update_irq(rdev, 1, RTC_AF | RTC_IRQF);
+
+ if (s3c_rtc_cpu_type == TYPE_S3C64XX)
+ writeb(S3C2410_INTP_ALM, s3c_rtc_base + S3C2410_INTP);
+
return IRQ_HANDLED;
}
@@ -61,6 +69,10 @@ static irqreturn_t s3c_rtc_tickirq(int irq, void *id)
struct rtc_device *rdev = id;
rtc_update_irq(rdev, 1, RTC_PF | RTC_IRQF);
+
+ if (s3c_rtc_cpu_type == TYPE_S3C64XX)
+ writeb(S3C2410_INTP_TIC, s3c_rtc_base + S3C2410_INTP);
+
return IRQ_HANDLED;
}
@@ -94,7 +106,7 @@ static int s3c_rtc_setpie(struct device *dev, int enabled)
if (enabled)
tmp |= S3C64XX_RTCCON_TICEN;
- writeb(tmp, s3c_rtc_base + S3C2410_RTCCON);
+ writew(tmp, s3c_rtc_base + S3C2410_RTCCON);
} else {
tmp = readb(s3c_rtc_base + S3C2410_TICNT);
tmp &= ~S3C2410_TICNT_ENABLE;
@@ -128,7 +140,7 @@ static int s3c_rtc_setfreq(struct device *dev, int freq)
tmp |= (rtc_dev->max_user_freq / freq)-1;
- writeb(tmp, s3c_rtc_base + S3C2410_TICNT);
+ writel(tmp, s3c_rtc_base + S3C2410_TICNT);
spin_unlock_irq(&s3c_rtc_pie_lock);
return 0;
@@ -431,6 +443,10 @@ static int __devexit s3c_rtc_remove(struct platform_device *dev)
s3c_rtc_setpie(&dev->dev, 0);
s3c_rtc_setaie(0);
+ clk_disable(rtc_clk);
+ clk_put(rtc_clk);
+ rtc_clk = NULL;
+
iounmap(s3c_rtc_base);
release_resource(s3c_rtc_mem);
kfree(s3c_rtc_mem);
@@ -442,6 +458,7 @@ static int __devinit s3c_rtc_probe(struct platform_device *pdev)
{
struct rtc_device *rtc;
struct resource *res;
+ unsigned int tmp, i;
int ret;
pr_debug("%s: probe=%p\n", __func__, pdev);
@@ -488,6 +505,16 @@ static int __devinit s3c_rtc_probe(struct platform_device *pdev)
goto err_nomap;
}
+ rtc_clk = clk_get(&pdev->dev, "rtc");
+ if (IS_ERR(rtc_clk)) {
+ dev_err(&pdev->dev, "failed to find rtc clock source\n");
+ ret = PTR_ERR(rtc_clk);
+ rtc_clk = NULL;
+ goto err_clk;
+ }
+
+ clk_enable(rtc_clk);
+
/* check to see if everything is setup correctly */
s3c_rtc_enable(pdev, 1);
@@ -510,6 +537,15 @@ static int __devinit s3c_rtc_probe(struct platform_device *pdev)
s3c_rtc_cpu_type = platform_get_device_id(pdev)->driver_data;
+ /* Check RTC Time */
+
+ for (i = S3C2410_RTCSEC; i <= S3C2410_RTCYEAR; i += 0x4) {
+ tmp = readb(s3c_rtc_base + i);
+
+ if ((tmp & 0xf) > 0x9 || ((tmp >> 4) & 0xf) > 0x9)
+ writeb(0, s3c_rtc_base + i);
+ }
+
if (s3c_rtc_cpu_type == TYPE_S3C64XX)
rtc->max_user_freq = 32768;
else
@@ -523,6 +559,10 @@ static int __devinit s3c_rtc_probe(struct platform_device *pdev)
err_nortc:
s3c_rtc_enable(pdev, 0);
+ clk_disable(rtc_clk);
+ clk_put(rtc_clk);
+
+ err_clk:
iounmap(s3c_rtc_base);
err_nomap:
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index e437ce8c1748..8f23eb54f498 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -536,8 +536,8 @@ config SERIAL_S3C6400
config SERIAL_S5PV210
tristate "Samsung S5PV210 Serial port support"
- depends on SERIAL_SAMSUNG && (CPU_S5PV210 || CPU_S5P6442)
- select SERIAL_SAMSUNG_UARTS_4 if CPU_S5PV210
+ depends on SERIAL_SAMSUNG && (CPU_S5PV210 || CPU_S5P6442 || CPU_S5PV310)
+ select SERIAL_SAMSUNG_UARTS_4 if (CPU_S5PV210 || CPU_S5PV310)
default y
help
Serial port support for Samsung's S5P Family of SoC's
diff --git a/drivers/serial/s5pv210.c b/drivers/serial/s5pv210.c
index 4a789e5361a4..6ebccd70a707 100644
--- a/drivers/serial/s5pv210.c
+++ b/drivers/serial/s5pv210.c
@@ -28,8 +28,12 @@
static int s5pv210_serial_setsource(struct uart_port *port,
struct s3c24xx_uart_clksrc *clk)
{
+ struct s3c2410_uartcfg *cfg = port->dev->platform_data;
unsigned long ucon = rd_regl(port, S3C2410_UCON);
+ if ((cfg->clocks_size) == 1)
+ return 0;
+
if (strcmp(clk->name, "pclk") == 0)
ucon &= ~S5PV210_UCON_CLKMASK;
else if (strcmp(clk->name, "uclk1") == 0)
@@ -47,10 +51,14 @@ static int s5pv210_serial_setsource(struct uart_port *port,
static int s5pv210_serial_getsource(struct uart_port *port,
struct s3c24xx_uart_clksrc *clk)
{
+ struct s3c2410_uartcfg *cfg = port->dev->platform_data;
u32 ucon = rd_regl(port, S3C2410_UCON);
clk->divisor = 1;
+ if ((cfg->clocks_size) == 1)
+ return 0;
+
switch (ucon & S5PV210_UCON_CLKMASK) {
case S5PV210_UCON_PCLK:
clk->name = "pclk";
diff --git a/drivers/serial/samsung.c b/drivers/serial/samsung.c
index a9d6c5626a0a..b1156ba8ad14 100644
--- a/drivers/serial/samsung.c
+++ b/drivers/serial/samsung.c
@@ -705,8 +705,13 @@ static void s3c24xx_serial_set_termios(struct uart_port *port,
if (ourport->info->has_divslot) {
unsigned int div = ourport->baudclk_rate / baud;
- udivslot = udivslot_table[div & 15];
- dbg("udivslot = %04x (div %d)\n", udivslot, div & 15);
+ if (cfg->has_fracval) {
+ udivslot = (div & 15);
+ dbg("fracval = %04x\n", udivslot);
+ } else {
+ udivslot = udivslot_table[div & 15];
+ dbg("udivslot = %04x (div %d)\n", udivslot, div & 15);
+ }
}
switch (termios->c_cflag & CSIZE) {
diff --git a/drivers/serial/sh-sci.c b/drivers/serial/sh-sci.c
index 5f90fcd7d107..c291b3add1d2 100644
--- a/drivers/serial/sh-sci.c
+++ b/drivers/serial/sh-sci.c
@@ -346,6 +346,27 @@ static int scif_rxfill(struct uart_port *port)
return sci_in(port, SCFDR) & SCIF2_RFDC_MASK;
}
}
+#elif defined(CONFIG_ARCH_SH7372)
+static int scif_txfill(struct uart_port *port)
+{
+ if (port->type == PORT_SCIFA)
+ return sci_in(port, SCFDR) >> 8;
+ else
+ return sci_in(port, SCTFDR);
+}
+
+static int scif_txroom(struct uart_port *port)
+{
+ return port->fifosize - scif_txfill(port);
+}
+
+static int scif_rxfill(struct uart_port *port)
+{
+ if (port->type == PORT_SCIFA)
+ return sci_in(port, SCFDR) & SCIF_RFDC_MASK;
+ else
+ return sci_in(port, SCRFDR);
+}
#else
static int scif_txfill(struct uart_port *port)
{
@@ -683,7 +704,7 @@ static irqreturn_t sci_rx_interrupt(int irq, void *ptr)
u16 ssr = sci_in(port, SCxSR);
/* Disable future Rx interrupts */
- if (port->type == PORT_SCIFA) {
+ if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) {
disable_irq_nosync(irq);
scr |= 0x4000;
} else {
@@ -928,7 +949,7 @@ static void sci_dma_tx_complete(void *arg)
if (!uart_circ_empty(xmit)) {
schedule_work(&s->work_tx);
- } else if (port->type == PORT_SCIFA) {
+ } else if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) {
u16 ctrl = sci_in(port, SCSCR);
sci_out(port, SCSCR, ctrl & ~SCI_CTRL_FLAGS_TIE);
}
@@ -1184,7 +1205,7 @@ static void sci_start_tx(struct uart_port *port)
unsigned short ctrl;
#ifdef CONFIG_SERIAL_SH_SCI_DMA
- if (port->type == PORT_SCIFA) {
+ if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) {
u16 new, scr = sci_in(port, SCSCR);
if (s->chan_tx)
new = scr | 0x8000;
@@ -1197,7 +1218,7 @@ static void sci_start_tx(struct uart_port *port)
s->cookie_tx < 0)
schedule_work(&s->work_tx);
#endif
- if (!s->chan_tx || port->type == PORT_SCIFA) {
+ if (!s->chan_tx || port->type == PORT_SCIFA || port->type == PORT_SCIFB) {
/* Set TIE (Transmit Interrupt Enable) bit in SCSCR */
ctrl = sci_in(port, SCSCR);
sci_out(port, SCSCR, ctrl | SCI_CTRL_FLAGS_TIE);
@@ -1210,7 +1231,7 @@ static void sci_stop_tx(struct uart_port *port)
/* Clear TIE (Transmit Interrupt Enable) bit in SCSCR */
ctrl = sci_in(port, SCSCR);
- if (port->type == PORT_SCIFA)
+ if (port->type == PORT_SCIFA || port->type == PORT_SCIFB)
ctrl &= ~0x8000;
ctrl &= ~SCI_CTRL_FLAGS_TIE;
sci_out(port, SCSCR, ctrl);
@@ -1222,7 +1243,7 @@ static void sci_start_rx(struct uart_port *port)
/* Set RIE (Receive Interrupt Enable) bit in SCSCR */
ctrl |= sci_in(port, SCSCR);
- if (port->type == PORT_SCIFA)
+ if (port->type == PORT_SCIFA || port->type == PORT_SCIFB)
ctrl &= ~0x4000;
sci_out(port, SCSCR, ctrl);
}
@@ -1233,7 +1254,7 @@ static void sci_stop_rx(struct uart_port *port)
/* Clear RIE (Receive Interrupt Enable) bit in SCSCR */
ctrl = sci_in(port, SCSCR);
- if (port->type == PORT_SCIFA)
+ if (port->type == PORT_SCIFA || port->type == PORT_SCIFB)
ctrl &= ~0x4000;
ctrl &= ~(SCI_CTRL_FLAGS_RIE | SCI_CTRL_FLAGS_REIE);
sci_out(port, SCSCR, ctrl);
@@ -1271,7 +1292,7 @@ static void rx_timer_fn(unsigned long arg)
struct uart_port *port = &s->port;
u16 scr = sci_in(port, SCSCR);
- if (port->type == PORT_SCIFA) {
+ if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) {
scr &= ~0x4000;
enable_irq(s->irqs[1]);
}
@@ -1524,6 +1545,8 @@ static const char *sci_type(struct uart_port *port)
return "scif";
case PORT_SCIFA:
return "scifa";
+ case PORT_SCIFB:
+ return "scifb";
}
return NULL;
@@ -1612,6 +1635,9 @@ static int __devinit sci_init_single(struct platform_device *dev,
port->line = index;
switch (p->type) {
+ case PORT_SCIFB:
+ port->fifosize = 256;
+ break;
case PORT_SCIFA:
port->fifosize = 64;
break;
diff --git a/drivers/serial/sh-sci.h b/drivers/serial/sh-sci.h
index f70c49f915fa..9b52f77a9305 100644
--- a/drivers/serial/sh-sci.h
+++ b/drivers/serial/sh-sci.h
@@ -322,7 +322,7 @@
#define CPU_SCIx_FNS(name, sci_offset, sci_size, scif_offset, scif_size)\
static inline unsigned int sci_##name##_in(struct uart_port *port) \
{ \
- if (port->type == PORT_SCIF) { \
+ if (port->type == PORT_SCIF || port->type == PORT_SCIFB) { \
SCI_IN(scif_size, scif_offset) \
} else { /* PORT_SCI or PORT_SCIFA */ \
SCI_IN(sci_size, sci_offset); \
@@ -330,7 +330,7 @@
} \
static inline void sci_##name##_out(struct uart_port *port, unsigned int value) \
{ \
- if (port->type == PORT_SCIF) { \
+ if (port->type == PORT_SCIF || port->type == PORT_SCIFB) { \
SCI_OUT(scif_size, scif_offset, value) \
} else { /* PORT_SCI or PORT_SCIFA */ \
SCI_OUT(sci_size, sci_offset, value); \
@@ -384,8 +384,12 @@
defined(CONFIG_CPU_SUBTYPE_SH7720) || \
defined(CONFIG_CPU_SUBTYPE_SH7721) || \
defined(CONFIG_ARCH_SH7367) || \
- defined(CONFIG_ARCH_SH7377) || \
- defined(CONFIG_ARCH_SH7372)
+ defined(CONFIG_ARCH_SH7377)
+#define SCIF_FNS(name, scif_offset, scif_size) \
+ CPU_SCIF_FNS(name, scif_offset, scif_size)
+#elif defined(CONFIG_ARCH_SH7372)
+#define SCIx_FNS(name, sh4_scifa_offset, sh4_scifa_size, sh4_scifb_offset, sh4_scifb_size) \
+ CPU_SCIx_FNS(name, sh4_scifa_offset, sh4_scifa_size, sh4_scifb_offset, sh4_scifb_size)
#define SCIF_FNS(name, scif_offset, scif_size) \
CPU_SCIF_FNS(name, scif_offset, scif_size)
#else
@@ -422,8 +426,7 @@
defined(CONFIG_CPU_SUBTYPE_SH7720) || \
defined(CONFIG_CPU_SUBTYPE_SH7721) || \
defined(CONFIG_ARCH_SH7367) || \
- defined(CONFIG_ARCH_SH7377) || \
- defined(CONFIG_ARCH_SH7372)
+ defined(CONFIG_ARCH_SH7377)
SCIF_FNS(SCSMR, 0x00, 16)
SCIF_FNS(SCBRR, 0x04, 8)
@@ -436,6 +439,20 @@ SCIF_FNS(SCFDR, 0x1c, 16)
SCIF_FNS(SCxTDR, 0x20, 8)
SCIF_FNS(SCxRDR, 0x24, 8)
SCIF_FNS(SCLSR, 0x00, 0)
+#elif defined(CONFIG_ARCH_SH7372)
+SCIF_FNS(SCSMR, 0x00, 16)
+SCIF_FNS(SCBRR, 0x04, 8)
+SCIF_FNS(SCSCR, 0x08, 16)
+SCIF_FNS(SCTDSR, 0x0c, 16)
+SCIF_FNS(SCFER, 0x10, 16)
+SCIF_FNS(SCxSR, 0x14, 16)
+SCIF_FNS(SCFCR, 0x18, 16)
+SCIF_FNS(SCFDR, 0x1c, 16)
+SCIF_FNS(SCTFDR, 0x38, 16)
+SCIF_FNS(SCRFDR, 0x3c, 16)
+SCIx_FNS(SCxTDR, 0x20, 8, 0x40, 8)
+SCIx_FNS(SCxRDR, 0x24, 8, 0x60, 8)
+SCIF_FNS(SCLSR, 0x00, 0)
#elif defined(CONFIG_CPU_SUBTYPE_SH7723) ||\
defined(CONFIG_CPU_SUBTYPE_SH7724)
SCIx_FNS(SCSMR, 0x00, 16, 0x00, 16)
diff --git a/drivers/sh/Makefile b/drivers/sh/Makefile
index 78bb5127abd0..08fc653a825c 100644
--- a/drivers/sh/Makefile
+++ b/drivers/sh/Makefile
@@ -1,9 +1,10 @@
#
# Makefile for the SuperH specific drivers.
#
+obj-y := clk.o intc.o
+
obj-$(CONFIG_SUPERHYWAY) += superhyway/
obj-$(CONFIG_MAPLE) += maple/
+
obj-$(CONFIG_GENERIC_GPIO) += pfc.o
-obj-$(CONFIG_SUPERH) += clk.o
obj-$(CONFIG_SH_CLK_CPG) += clk-cpg.o
-obj-y += intc.o
diff --git a/drivers/sh/clk-cpg.c b/drivers/sh/clk-cpg.c
index f5c80ba9ab1c..8c024b984ed8 100644
--- a/drivers/sh/clk-cpg.c
+++ b/drivers/sh/clk-cpg.c
@@ -68,6 +68,39 @@ static unsigned long sh_clk_div6_recalc(struct clk *clk)
return clk->freq_table[idx].frequency;
}
+static int sh_clk_div6_set_parent(struct clk *clk, struct clk *parent)
+{
+ struct clk_div_mult_table *table = &sh_clk_div6_table;
+ u32 value;
+ int ret, i;
+
+ if (!clk->parent_table || !clk->parent_num)
+ return -EINVAL;
+
+ /* Search the parent */
+ for (i = 0; i < clk->parent_num; i++)
+ if (clk->parent_table[i] == parent)
+ break;
+
+ if (i == clk->parent_num)
+ return -ENODEV;
+
+ ret = clk_reparent(clk, parent);
+ if (ret < 0)
+ return ret;
+
+ value = __raw_readl(clk->enable_reg) &
+ ~(((1 << clk->src_width) - 1) << clk->src_shift);
+
+ __raw_writel(value | (i << clk->src_shift), clk->enable_reg);
+
+ /* Rebuild the frequency table */
+ clk_rate_table_build(clk, clk->freq_table, table->nr_divisors,
+ table, &clk->arch_flags);
+
+ return 0;
+}
+
static int sh_clk_div6_set_rate(struct clk *clk,
unsigned long rate, int algo_id)
{
@@ -117,7 +150,17 @@ static struct clk_ops sh_clk_div6_clk_ops = {
.disable = sh_clk_div6_disable,
};
-int __init sh_clk_div6_register(struct clk *clks, int nr)
+static struct clk_ops sh_clk_div6_reparent_clk_ops = {
+ .recalc = sh_clk_div6_recalc,
+ .round_rate = sh_clk_div_round_rate,
+ .set_rate = sh_clk_div6_set_rate,
+ .enable = sh_clk_div6_enable,
+ .disable = sh_clk_div6_disable,
+ .set_parent = sh_clk_div6_set_parent,
+};
+
+static int __init sh_clk_div6_register_ops(struct clk *clks, int nr,
+ struct clk_ops *ops)
{
struct clk *clkp;
void *freq_table;
@@ -136,7 +179,7 @@ int __init sh_clk_div6_register(struct clk *clks, int nr)
for (k = 0; !ret && (k < nr); k++) {
clkp = clks + k;
- clkp->ops = &sh_clk_div6_clk_ops;
+ clkp->ops = ops;
clkp->id = -1;
clkp->freq_table = freq_table + (k * freq_table_size);
clkp->freq_table[nr_divs].frequency = CPUFREQ_TABLE_END;
@@ -147,6 +190,17 @@ int __init sh_clk_div6_register(struct clk *clks, int nr)
return ret;
}
+int __init sh_clk_div6_register(struct clk *clks, int nr)
+{
+ return sh_clk_div6_register_ops(clks, nr, &sh_clk_div6_clk_ops);
+}
+
+int __init sh_clk_div6_reparent_register(struct clk *clks, int nr)
+{
+ return sh_clk_div6_register_ops(clks, nr,
+ &sh_clk_div6_reparent_clk_ops);
+}
+
static unsigned long sh_clk_div4_recalc(struct clk *clk)
{
struct clk_div4_table *d4t = clk->priv;
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index a9ca72f301bf..a1e9406b5afa 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -1896,6 +1896,13 @@ config FB_W100
If unsure, say N.
+config SH_MIPI_DSI
+ tristate
+ depends on (SUPERH || ARCH_SHMOBILE) && HAVE_CLK
+
+config SH_LCD_MIPI_DSI
+ bool
+
config FB_SH_MOBILE_LCDC
tristate "SuperH Mobile LCDC framebuffer support"
depends on FB && (SUPERH || ARCH_SHMOBILE) && HAVE_CLK
@@ -1904,9 +1911,17 @@ config FB_SH_MOBILE_LCDC
select FB_SYS_IMAGEBLIT
select FB_SYS_FOPS
select FB_DEFERRED_IO
+ select SH_MIPI_DSI if SH_LCD_MIPI_DSI
---help---
Frame buffer driver for the on-chip SH-Mobile LCD controller.
+config FB_SH_MOBILE_HDMI
+ tristate "SuperH Mobile HDMI controller support"
+ depends on FB_SH_MOBILE_LCDC
+ select FB_MODE_HELPERS
+ ---help---
+ Driver for the on-chip SH-Mobile HDMI controller.
+
config FB_TMIO
tristate "Toshiba Mobile IO FrameBuffer support"
depends on FB && MFD_CORE
diff --git a/drivers/video/Makefile b/drivers/video/Makefile
index f56a9cae2157..485e8ed1318c 100644
--- a/drivers/video/Makefile
+++ b/drivers/video/Makefile
@@ -123,6 +123,8 @@ obj-$(CONFIG_FB_IBM_GXT4500) += gxt4500.o
obj-$(CONFIG_FB_PS3) += ps3fb.o
obj-$(CONFIG_FB_SM501) += sm501fb.o
obj-$(CONFIG_FB_XILINX) += xilinxfb.o
+obj-$(CONFIG_SH_MIPI_DSI) += sh_mipi_dsi.o
+obj-$(CONFIG_FB_SH_MOBILE_HDMI) += sh_mobile_hdmi.o
obj-$(CONFIG_FB_SH_MOBILE_LCDC) += sh_mobile_lcdcfb.o
obj-$(CONFIG_FB_OMAP) += omap/
obj-y += omap2/
diff --git a/drivers/video/sh_mipi_dsi.c b/drivers/video/sh_mipi_dsi.c
new file mode 100644
index 000000000000..5699ce0c1780
--- /dev/null
+++ b/drivers/video/sh_mipi_dsi.c
@@ -0,0 +1,505 @@
+/*
+ * Renesas SH-mobile MIPI DSI support
+ *
+ * Copyright (C) 2010 Guennadi Liakhovetski <g.liakhovetski@gmx.de>
+ *
+ * This is free software; you can redistribute it and/or modify
+ * it under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/types.h>
+
+#include <video/mipi_display.h>
+#include <video/sh_mipi_dsi.h>
+#include <video/sh_mobile_lcdc.h>
+
+#define CMTSRTCTR 0x80d0
+#define CMTSRTREQ 0x8070
+
+#define DSIINTE 0x0060
+
+/* E.g., sh7372 has 2 MIPI-DSIs - one for each LCDC */
+#define MAX_SH_MIPI_DSI 2
+
+struct sh_mipi {
+ void __iomem *base;
+ struct clk *dsit_clk;
+ struct clk *dsip_clk;
+};
+
+static struct sh_mipi *mipi_dsi[MAX_SH_MIPI_DSI];
+
+/* Protect the above array */
+static DEFINE_MUTEX(array_lock);
+
+static struct sh_mipi *sh_mipi_by_handle(int handle)
+{
+ if (handle >= ARRAY_SIZE(mipi_dsi) || handle < 0)
+ return NULL;
+
+ return mipi_dsi[handle];
+}
+
+static int sh_mipi_send_short(struct sh_mipi *mipi, u8 dsi_cmd,
+ u8 cmd, u8 param)
+{
+ u32 data = (dsi_cmd << 24) | (cmd << 16) | (param << 8);
+ int cnt = 100;
+
+ /* transmit a short packet to LCD panel */
+ iowrite32(1 | data, mipi->base + 0x80d0); /* CMTSRTCTR */
+ iowrite32(1, mipi->base + 0x8070); /* CMTSRTREQ */
+
+ while ((ioread32(mipi->base + 0x8070) & 1) && --cnt)
+ udelay(1);
+
+ return cnt ? 0 : -ETIMEDOUT;
+}
+
+#define LCD_CHAN2MIPI(c) ((c) < LCDC_CHAN_MAINLCD || (c) > LCDC_CHAN_SUBLCD ? \
+ -EINVAL : (c) - 1)
+
+static int sh_mipi_dcs(int handle, u8 cmd)
+{
+ struct sh_mipi *mipi = sh_mipi_by_handle(LCD_CHAN2MIPI(handle));
+ if (!mipi)
+ return -ENODEV;
+ return sh_mipi_send_short(mipi, MIPI_DSI_DCS_SHORT_WRITE, cmd, 0);
+}
+
+static int sh_mipi_dcs_param(int handle, u8 cmd, u8 param)
+{
+ struct sh_mipi *mipi = sh_mipi_by_handle(LCD_CHAN2MIPI(handle));
+ if (!mipi)
+ return -ENODEV;
+ return sh_mipi_send_short(mipi, MIPI_DSI_DCS_SHORT_WRITE_PARAM, cmd,
+ param);
+}
+
+static void sh_mipi_dsi_enable(struct sh_mipi *mipi, bool enable)
+{
+ /*
+ * enable LCDC data tx, transition to LPS after completion of each HS
+ * packet
+ */
+ iowrite32(0x00000002 | enable, mipi->base + 0x8000); /* DTCTR */
+}
+
+static void sh_mipi_shutdown(struct platform_device *pdev)
+{
+ struct sh_mipi *mipi = platform_get_drvdata(pdev);
+
+ sh_mipi_dsi_enable(mipi, false);
+}
+
+static void mipi_display_on(void *arg, struct fb_info *info)
+{
+ struct sh_mipi *mipi = arg;
+
+ sh_mipi_dsi_enable(mipi, true);
+}
+
+static void mipi_display_off(void *arg)
+{
+ struct sh_mipi *mipi = arg;
+
+ sh_mipi_dsi_enable(mipi, false);
+}
+
+static int __init sh_mipi_setup(struct sh_mipi *mipi,
+ struct sh_mipi_dsi_info *pdata)
+{
+ void __iomem *base = mipi->base;
+ struct sh_mobile_lcdc_chan_cfg *ch = pdata->lcd_chan;
+ u32 pctype, datatype, pixfmt;
+ u32 linelength;
+ bool yuv;
+
+ /* Select data format */
+ switch (pdata->data_format) {
+ case MIPI_RGB888:
+ pctype = 0;
+ datatype = MIPI_DSI_PACKED_PIXEL_STREAM_24;
+ pixfmt = MIPI_DCS_PIXEL_FMT_24BIT;
+ linelength = ch->lcd_cfg.xres * 3;
+ yuv = false;
+ break;
+ case MIPI_RGB565:
+ pctype = 1;
+ datatype = MIPI_DSI_PACKED_PIXEL_STREAM_16;
+ pixfmt = MIPI_DCS_PIXEL_FMT_16BIT;
+ linelength = ch->lcd_cfg.xres * 2;
+ yuv = false;
+ break;
+ case MIPI_RGB666_LP:
+ pctype = 2;
+ datatype = MIPI_DSI_PIXEL_STREAM_3BYTE_18;
+ pixfmt = MIPI_DCS_PIXEL_FMT_24BIT;
+ linelength = ch->lcd_cfg.xres * 3;
+ yuv = false;
+ break;
+ case MIPI_RGB666:
+ pctype = 3;
+ datatype = MIPI_DSI_PACKED_PIXEL_STREAM_18;
+ pixfmt = MIPI_DCS_PIXEL_FMT_18BIT;
+ linelength = (ch->lcd_cfg.xres * 18 + 7) / 8;
+ yuv = false;
+ break;
+ case MIPI_BGR888:
+ pctype = 8;
+ datatype = MIPI_DSI_PACKED_PIXEL_STREAM_24;
+ pixfmt = MIPI_DCS_PIXEL_FMT_24BIT;
+ linelength = ch->lcd_cfg.xres * 3;
+ yuv = false;
+ break;
+ case MIPI_BGR565:
+ pctype = 9;
+ datatype = MIPI_DSI_PACKED_PIXEL_STREAM_16;
+ pixfmt = MIPI_DCS_PIXEL_FMT_16BIT;
+ linelength = ch->lcd_cfg.xres * 2;
+ yuv = false;
+ break;
+ case MIPI_BGR666_LP:
+ pctype = 0xa;
+ datatype = MIPI_DSI_PIXEL_STREAM_3BYTE_18;
+ pixfmt = MIPI_DCS_PIXEL_FMT_24BIT;
+ linelength = ch->lcd_cfg.xres * 3;
+ yuv = false;
+ break;
+ case MIPI_BGR666:
+ pctype = 0xb;
+ datatype = MIPI_DSI_PACKED_PIXEL_STREAM_18;
+ pixfmt = MIPI_DCS_PIXEL_FMT_18BIT;
+ linelength = (ch->lcd_cfg.xres * 18 + 7) / 8;
+ yuv = false;
+ break;
+ case MIPI_YUYV:
+ pctype = 4;
+ datatype = MIPI_DSI_PACKED_PIXEL_STREAM_YCBCR16;
+ pixfmt = MIPI_DCS_PIXEL_FMT_16BIT;
+ linelength = ch->lcd_cfg.xres * 2;
+ yuv = true;
+ break;
+ case MIPI_UYVY:
+ pctype = 5;
+ datatype = MIPI_DSI_PACKED_PIXEL_STREAM_YCBCR16;
+ pixfmt = MIPI_DCS_PIXEL_FMT_16BIT;
+ linelength = ch->lcd_cfg.xres * 2;
+ yuv = true;
+ break;
+ case MIPI_YUV420_L:
+ pctype = 6;
+ datatype = MIPI_DSI_PACKED_PIXEL_STREAM_YCBCR12;
+ pixfmt = MIPI_DCS_PIXEL_FMT_12BIT;
+ linelength = (ch->lcd_cfg.xres * 12 + 7) / 8;
+ yuv = true;
+ break;
+ case MIPI_YUV420:
+ pctype = 7;
+ datatype = MIPI_DSI_PACKED_PIXEL_STREAM_YCBCR12;
+ pixfmt = MIPI_DCS_PIXEL_FMT_12BIT;
+ /* Length of U/V line */
+ linelength = (ch->lcd_cfg.xres + 1) / 2;
+ yuv = true;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ if ((yuv && ch->interface_type != YUV422) ||
+ (!yuv && ch->interface_type != RGB24))
+ return -EINVAL;
+
+ /* reset DSI link */
+ iowrite32(0x00000001, base); /* SYSCTRL */
+ /* Hold reset for 100 cycles of the slowest of bus, HS byte and LP clock */
+ udelay(50);
+ iowrite32(0x00000000, base); /* SYSCTRL */
+
+ /* setup DSI link */
+
+ /*
+ * Default = ULPS enable |
+ * Contention detection enabled |
+ * EoT packet transmission enable |
+ * CRC check enable |
+ * ECC check enable
+ * additionally enable first two lanes
+ */
+ iowrite32(0x00003703, base + 0x04); /* SYSCONF */
+ /*
+ * T_wakeup = 0x7000
+ * T_hs-trail = 3
+ * T_hs-prepare = 3
+ * T_clk-trail = 3
+ * T_clk-prepare = 2
+ */
+ iowrite32(0x70003332, base + 0x08); /* TIMSET */
+ /* no responses requested */
+ iowrite32(0x00000000, base + 0x18); /* RESREQSET0 */
+ /* request response to packets of type 0x28 */
+ iowrite32(0x00000100, base + 0x1c); /* RESREQSET1 */
+ /* High-speed transmission timeout, default 0xffffffff */
+ iowrite32(0x0fffffff, base + 0x20); /* HSTTOVSET */
+ /* LP reception timeout, default 0xffffffff */
+ iowrite32(0x0fffffff, base + 0x24); /* LPRTOVSET */
+ /* Turn-around timeout, default 0xffffffff */
+ iowrite32(0x0fffffff, base + 0x28); /* TATOVSET */
+ /* Peripheral reset timeout, default 0xffffffff */
+ iowrite32(0x0fffffff, base + 0x2c); /* PRTOVSET */
+ /* Enable timeout counters */
+ iowrite32(0x00000f00, base + 0x30); /* DSICTRL */
+ /* Interrupts not used, disable all */
+ iowrite32(0, base + DSIINTE);
+ /* DSI-Tx bias on */
+ iowrite32(0x00000001, base + 0x70); /* PHYCTRL */
+ udelay(200);
+ /* Deassert resets, power on, set multiplier */
+ iowrite32(0x03070b01, base + 0x70); /* PHYCTRL */
+
+ /* setup l-bridge */
+
+ /*
+ * Enable transmission of all packets,
+ * transmit LPS after each HS packet completion
+ */
+ iowrite32(0x00000006, base + 0x8000); /* DTCTR */
+ /* VSYNC width = 2 (<< 17) */
+ iowrite32(0x00040000 | (pctype << 12) | datatype, base + 0x8020); /* VMCTR1 */
+ /*
+ * Non-burst mode with sync pulses: VSE and HSE are output,
+ * HSA period allowed, no commands in LP
+ */
+ iowrite32(0x00e00000, base + 0x8024); /* VMCTR2 */
+ /*
+ * 0x660 = 1632 bytes per line (RGB24, 544 pixels: see
+ * sh_mobile_lcdc_info.ch[0].lcd_cfg.xres), HSALEN = 1 - default
+ * (unused, since VMCTR2[HSABM] = 0)
+ */
+ iowrite32(1 | (linelength << 16), base + 0x8028); /* VMLEN1 */
+
+ msleep(5);
+
+ /* setup LCD panel */
+
+ /* cf. drivers/video/omap/lcd_mipid.c */
+ sh_mipi_dcs(ch->chan, MIPI_DCS_EXIT_SLEEP_MODE);
+ msleep(120);
+ /*
+ * [7] - Page Address Mode
+ * [6] - Column Address Mode
+ * [5] - Page / Column Address Mode
+ * [4] - Display Device Line Refresh Order
+ * [3] - RGB/BGR Order
+ * [2] - Display Data Latch Data Order
+ * [1] - Flip Horizontal
+ * [0] - Flip Vertical
+ */
+ sh_mipi_dcs_param(ch->chan, MIPI_DCS_SET_ADDRESS_MODE, 0x00);
+ /* cf. set_data_lines() */
+ sh_mipi_dcs_param(ch->chan, MIPI_DCS_SET_PIXEL_FORMAT,
+ pixfmt << 4);
+ sh_mipi_dcs(ch->chan, MIPI_DCS_SET_DISPLAY_ON);
+
+ return 0;
+}
+
+static int __init sh_mipi_probe(struct platform_device *pdev)
+{
+ struct sh_mipi *mipi;
+ struct sh_mipi_dsi_info *pdata = pdev->dev.platform_data;
+ struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ unsigned long rate, f_current;
+ int idx = pdev->id, ret;
+ char dsip_clk[] = "dsi.p_clk";
+
+ if (!res || idx >= ARRAY_SIZE(mipi_dsi) || !pdata)
+ return -ENODEV;
+
+ mutex_lock(&array_lock);
+ if (idx < 0)
+ for (idx = 0; idx < ARRAY_SIZE(mipi_dsi) && mipi_dsi[idx]; idx++)
+ ;
+
+ if (idx == ARRAY_SIZE(mipi_dsi)) {
+ ret = -EBUSY;
+ goto efindslot;
+ }
+
+ mipi = kzalloc(sizeof(*mipi), GFP_KERNEL);
+ if (!mipi) {
+ ret = -ENOMEM;
+ goto ealloc;
+ }
+
+ if (!request_mem_region(res->start, resource_size(res), pdev->name)) {
+ dev_err(&pdev->dev, "MIPI register region already claimed\n");
+ ret = -EBUSY;
+ goto ereqreg;
+ }
+
+ mipi->base = ioremap(res->start, resource_size(res));
+ if (!mipi->base) {
+ ret = -ENOMEM;
+ goto emap;
+ }
+
+ mipi->dsit_clk = clk_get(&pdev->dev, "dsit_clk");
+ if (IS_ERR(mipi->dsit_clk)) {
+ ret = PTR_ERR(mipi->dsit_clk);
+ goto eclktget;
+ }
+
+ f_current = clk_get_rate(mipi->dsit_clk);
+ /* 80MHz required by the datasheet */
+ rate = clk_round_rate(mipi->dsit_clk, 80000000);
+ if (rate > 0 && rate != f_current)
+ ret = clk_set_rate(mipi->dsit_clk, rate);
+ else
+ ret = rate;
+ if (ret < 0)
+ goto esettrate;
+
+ dev_dbg(&pdev->dev, "DSI-T clk %lu -> %lu\n", f_current, rate);
+
+ sprintf(dsip_clk, "dsi%1.1dp_clk", idx);
+ mipi->dsip_clk = clk_get(&pdev->dev, dsip_clk);
+ if (IS_ERR(mipi->dsip_clk)) {
+ ret = PTR_ERR(mipi->dsip_clk);
+ goto eclkpget;
+ }
+
+ f_current = clk_get_rate(mipi->dsip_clk);
+ /* Between 10 and 50MHz */
+ rate = clk_round_rate(mipi->dsip_clk, 24000000);
+ if (rate > 0 && rate != f_current)
+ ret = clk_set_rate(mipi->dsip_clk, rate);
+ else
+ ret = rate;
+ if (ret < 0)
+ goto esetprate;
+
+ dev_dbg(&pdev->dev, "DSI-P clk %lu -> %lu\n", f_current, rate);
+
+ msleep(10);
+
+ ret = clk_enable(mipi->dsit_clk);
+ if (ret < 0)
+ goto eclkton;
+
+ ret = clk_enable(mipi->dsip_clk);
+ if (ret < 0)
+ goto eclkpon;
+
+ mipi_dsi[idx] = mipi;
+
+ ret = sh_mipi_setup(mipi, pdata);
+ if (ret < 0)
+ goto emipisetup;
+
+ mutex_unlock(&array_lock);
+ platform_set_drvdata(pdev, mipi);
+
+ /* Set up LCDC callbacks */
+ pdata->lcd_chan->board_cfg.board_data = mipi;
+ pdata->lcd_chan->board_cfg.display_on = mipi_display_on;
+ pdata->lcd_chan->board_cfg.display_off = mipi_display_off;
+
+ return 0;
+
+emipisetup:
+ mipi_dsi[idx] = NULL;
+ clk_disable(mipi->dsip_clk);
+eclkpon:
+ clk_disable(mipi->dsit_clk);
+eclkton:
+esetprate:
+ clk_put(mipi->dsip_clk);
+eclkpget:
+esettrate:
+ clk_put(mipi->dsit_clk);
+eclktget:
+ iounmap(mipi->base);
+emap:
+ release_mem_region(res->start, resource_size(res));
+ereqreg:
+ kfree(mipi);
+ealloc:
+efindslot:
+ mutex_unlock(&array_lock);
+
+ return ret;
+}
+
+static int __exit sh_mipi_remove(struct platform_device *pdev)
+{
+ struct sh_mipi_dsi_info *pdata = pdev->dev.platform_data;
+ struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ struct sh_mipi *mipi = platform_get_drvdata(pdev);
+ int i, ret;
+
+ mutex_lock(&array_lock);
+
+ for (i = 0; i < ARRAY_SIZE(mipi_dsi) && mipi_dsi[i] != mipi; i++)
+ ;
+
+ if (i == ARRAY_SIZE(mipi_dsi)) {
+ ret = -EINVAL;
+ } else {
+ ret = 0;
+ mipi_dsi[i] = NULL;
+ }
+
+ mutex_unlock(&array_lock);
+
+ if (ret < 0)
+ return ret;
+
+ pdata->lcd_chan->board_cfg.display_on = NULL;
+ pdata->lcd_chan->board_cfg.display_off = NULL;
+ pdata->lcd_chan->board_cfg.board_data = NULL;
+
+ clk_disable(mipi->dsip_clk);
+ clk_disable(mipi->dsit_clk);
+ clk_put(mipi->dsit_clk);
+ clk_put(mipi->dsip_clk);
+ iounmap(mipi->base);
+ if (res)
+ release_mem_region(res->start, resource_size(res));
+ platform_set_drvdata(pdev, NULL);
+ kfree(mipi);
+
+ return 0;
+}
+
+static struct platform_driver sh_mipi_driver = {
+ .remove = __exit_p(sh_mipi_remove),
+ .shutdown = sh_mipi_shutdown,
+ .driver = {
+ .name = "sh-mipi-dsi",
+ },
+};
+
+static int __init sh_mipi_init(void)
+{
+ return platform_driver_probe(&sh_mipi_driver, sh_mipi_probe);
+}
+module_init(sh_mipi_init);
+
+static void __exit sh_mipi_exit(void)
+{
+ platform_driver_unregister(&sh_mipi_driver);
+}
+module_exit(sh_mipi_exit);
+
+MODULE_AUTHOR("Guennadi Liakhovetski <g.liakhovetski@gmx.de>");
+MODULE_DESCRIPTION("SuperH / ARM-shmobile MIPI DSI driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/video/sh_mobile_hdmi.c b/drivers/video/sh_mobile_hdmi.c
new file mode 100644
index 000000000000..2fde08cc66bf
--- /dev/null
+++ b/drivers/video/sh_mobile_hdmi.c
@@ -0,0 +1,1028 @@
+/*
+ * SH-Mobile High-Definition Multimedia Interface (HDMI) driver
+ * for SLISHDMI13T and SLIPHDMIT IP cores
+ *
+ * Copyright (C) 2010, Guennadi Liakhovetski <g.liakhovetski@gmx.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/clk.h>
+#include <linux/console.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+#include <linux/workqueue.h>
+
+#include <video/sh_mobile_hdmi.h>
+#include <video/sh_mobile_lcdc.h>
+
+#define HDMI_SYSTEM_CTRL 0x00 /* System control */
+#define HDMI_L_R_DATA_SWAP_CTRL_RPKT 0x01 /* L/R data swap control,
+ bits 19..16 of 20-bit N for Audio Clock Regeneration packet */
+#define HDMI_20_BIT_N_FOR_AUDIO_RPKT_15_8 0x02 /* bits 15..8 of 20-bit N for Audio Clock Regeneration packet */
+#define HDMI_20_BIT_N_FOR_AUDIO_RPKT_7_0 0x03 /* bits 7..0 of 20-bit N for Audio Clock Regeneration packet */
+#define HDMI_SPDIF_AUDIO_SAMP_FREQ_CTS 0x04 /* SPDIF audio sampling frequency,
+ bits 19..16 of Internal CTS */
+#define HDMI_INTERNAL_CTS_15_8 0x05 /* bits 15..8 of Internal CTS */
+#define HDMI_INTERNAL_CTS_7_0 0x06 /* bits 7..0 of Internal CTS */
+#define HDMI_EXTERNAL_CTS_19_16 0x07 /* External CTS */
+#define HDMI_EXTERNAL_CTS_15_8 0x08 /* External CTS */
+#define HDMI_EXTERNAL_CTS_7_0 0x09 /* External CTS */
+#define HDMI_AUDIO_SETTING_1 0x0A /* Audio setting.1 */
+#define HDMI_AUDIO_SETTING_2 0x0B /* Audio setting.2 */
+#define HDMI_I2S_AUDIO_SET 0x0C /* I2S audio setting */
+#define HDMI_DSD_AUDIO_SET 0x0D /* DSD audio setting */
+#define HDMI_DEBUG_MONITOR_1 0x0E /* Debug monitor.1 */
+#define HDMI_DEBUG_MONITOR_2 0x0F /* Debug monitor.2 */
+#define HDMI_I2S_INPUT_PIN_SWAP 0x10 /* I2S input pin swap */
+#define HDMI_AUDIO_STATUS_BITS_SETTING_1 0x11 /* Audio status bits setting.1 */
+#define HDMI_AUDIO_STATUS_BITS_SETTING_2 0x12 /* Audio status bits setting.2 */
+#define HDMI_CATEGORY_CODE 0x13 /* Category code */
+#define HDMI_SOURCE_NUM_AUDIO_WORD_LEN 0x14 /* Source number/Audio word length */
+#define HDMI_AUDIO_VIDEO_SETTING_1 0x15 /* Audio/Video setting.1 */
+#define HDMI_VIDEO_SETTING_1 0x16 /* Video setting.1 */
+#define HDMI_DEEP_COLOR_MODES 0x17 /* Deep Color Modes */
+
+/* 12 16- and 10-bit Color space conversion parameters: 0x18..0x2f */
+#define HDMI_COLOR_SPACE_CONVERSION_PARAMETERS 0x18
+
+#define HDMI_EXTERNAL_VIDEO_PARAM_SETTINGS 0x30 /* External video parameter settings */
+#define HDMI_EXTERNAL_H_TOTAL_7_0 0x31 /* External horizontal total (LSB) */
+#define HDMI_EXTERNAL_H_TOTAL_11_8 0x32 /* External horizontal total (MSB) */
+#define HDMI_EXTERNAL_H_BLANK_7_0 0x33 /* External horizontal blank (LSB) */
+#define HDMI_EXTERNAL_H_BLANK_9_8 0x34 /* External horizontal blank (MSB) */
+#define HDMI_EXTERNAL_H_DELAY_7_0 0x35 /* External horizontal delay (LSB) */
+#define HDMI_EXTERNAL_H_DELAY_9_8 0x36 /* External horizontal delay (MSB) */
+#define HDMI_EXTERNAL_H_DURATION_7_0 0x37 /* External horizontal duration (LSB) */
+#define HDMI_EXTERNAL_H_DURATION_9_8 0x38 /* External horizontal duration (MSB) */
+#define HDMI_EXTERNAL_V_TOTAL_7_0 0x39 /* External vertical total (LSB) */
+#define HDMI_EXTERNAL_V_TOTAL_9_8 0x3A /* External vertical total (MSB) */
+#define HDMI_AUDIO_VIDEO_SETTING_2 0x3B /* Audio/Video setting.2 */
+#define HDMI_EXTERNAL_V_BLANK 0x3D /* External vertical blank */
+#define HDMI_EXTERNAL_V_DELAY 0x3E /* External vertical delay */
+#define HDMI_EXTERNAL_V_DURATION 0x3F /* External vertical duration */
+#define HDMI_CTRL_PKT_MANUAL_SEND_CONTROL 0x40 /* Control packet manual send control */
+#define HDMI_CTRL_PKT_AUTO_SEND 0x41 /* Control packet auto send with VSYNC control */
+#define HDMI_AUTO_CHECKSUM_OPTION 0x42 /* Auto checksum option */
+#define HDMI_VIDEO_SETTING_2 0x45 /* Video setting.2 */
+#define HDMI_OUTPUT_OPTION 0x46 /* Output option */
+#define HDMI_SLIPHDMIT_PARAM_OPTION 0x51 /* SLIPHDMIT parameter option */
+#define HDMI_HSYNC_PMENT_AT_EMB_7_0 0x52 /* HSYNC placement at embedded sync (LSB) */
+#define HDMI_HSYNC_PMENT_AT_EMB_15_8 0x53 /* HSYNC placement at embedded sync (MSB) */
+#define HDMI_VSYNC_PMENT_AT_EMB_7_0 0x54 /* VSYNC placement at embedded sync (LSB) */
+#define HDMI_VSYNC_PMENT_AT_EMB_14_8 0x55 /* VSYNC placement at embedded sync (MSB) */
+#define HDMI_SLIPHDMIT_PARAM_SETTINGS_1 0x56 /* SLIPHDMIT parameter settings.1 */
+#define HDMI_SLIPHDMIT_PARAM_SETTINGS_2 0x57 /* SLIPHDMIT parameter settings.2 */
+#define HDMI_SLIPHDMIT_PARAM_SETTINGS_3 0x58 /* SLIPHDMIT parameter settings.3 */
+#define HDMI_SLIPHDMIT_PARAM_SETTINGS_5 0x59 /* SLIPHDMIT parameter settings.5 */
+#define HDMI_SLIPHDMIT_PARAM_SETTINGS_6 0x5A /* SLIPHDMIT parameter settings.6 */
+#define HDMI_SLIPHDMIT_PARAM_SETTINGS_7 0x5B /* SLIPHDMIT parameter settings.7 */
+#define HDMI_SLIPHDMIT_PARAM_SETTINGS_8 0x5C /* SLIPHDMIT parameter settings.8 */
+#define HDMI_SLIPHDMIT_PARAM_SETTINGS_9 0x5D /* SLIPHDMIT parameter settings.9 */
+#define HDMI_SLIPHDMIT_PARAM_SETTINGS_10 0x5E /* SLIPHDMIT parameter settings.10 */
+#define HDMI_CTRL_PKT_BUF_INDEX 0x5F /* Control packet buffer index */
+#define HDMI_CTRL_PKT_BUF_ACCESS_HB0 0x60 /* Control packet data buffer access window - HB0 */
+#define HDMI_CTRL_PKT_BUF_ACCESS_HB1 0x61 /* Control packet data buffer access window - HB1 */
+#define HDMI_CTRL_PKT_BUF_ACCESS_HB2 0x62 /* Control packet data buffer access window - HB2 */
+#define HDMI_CTRL_PKT_BUF_ACCESS_PB0 0x63 /* Control packet data buffer access window - PB0 */
+#define HDMI_CTRL_PKT_BUF_ACCESS_PB1 0x64 /* Control packet data buffer access window - PB1 */
+#define HDMI_CTRL_PKT_BUF_ACCESS_PB2 0x65 /* Control packet data buffer access window - PB2 */
+#define HDMI_CTRL_PKT_BUF_ACCESS_PB3 0x66 /* Control packet data buffer access window - PB3 */
+#define HDMI_CTRL_PKT_BUF_ACCESS_PB4 0x67 /* Control packet data buffer access window - PB4 */
+#define HDMI_CTRL_PKT_BUF_ACCESS_PB5 0x68 /* Control packet data buffer access window - PB5 */
+#define HDMI_CTRL_PKT_BUF_ACCESS_PB6 0x69 /* Control packet data buffer access window - PB6 */
+#define HDMI_CTRL_PKT_BUF_ACCESS_PB7 0x6A /* Control packet data buffer access window - PB7 */
+#define HDMI_CTRL_PKT_BUF_ACCESS_PB8 0x6B /* Control packet data buffer access window - PB8 */
+#define HDMI_CTRL_PKT_BUF_ACCESS_PB9 0x6C /* Control packet data buffer access window - PB9 */
+#define HDMI_CTRL_PKT_BUF_ACCESS_PB10 0x6D /* Control packet data buffer access window - PB10 */
+#define HDMI_CTRL_PKT_BUF_ACCESS_PB11 0x6E /* Control packet data buffer access window - PB11 */
+#define HDMI_CTRL_PKT_BUF_ACCESS_PB12 0x6F /* Control packet data buffer access window - PB12 */
+#define HDMI_CTRL_PKT_BUF_ACCESS_PB13 0x70 /* Control packet data buffer access window - PB13 */
+#define HDMI_CTRL_PKT_BUF_ACCESS_PB14 0x71 /* Control packet data buffer access window - PB14 */
+#define HDMI_CTRL_PKT_BUF_ACCESS_PB15 0x72 /* Control packet data buffer access window - PB15 */
+#define HDMI_CTRL_PKT_BUF_ACCESS_PB16 0x73 /* Control packet data buffer access window - PB16 */
+#define HDMI_CTRL_PKT_BUF_ACCESS_PB17 0x74 /* Control packet data buffer access window - PB17 */
+#define HDMI_CTRL_PKT_BUF_ACCESS_PB18 0x75 /* Control packet data buffer access window - PB18 */
+#define HDMI_CTRL_PKT_BUF_ACCESS_PB19 0x76 /* Control packet data buffer access window - PB19 */
+#define HDMI_CTRL_PKT_BUF_ACCESS_PB20 0x77 /* Control packet data buffer access window - PB20 */
+#define HDMI_CTRL_PKT_BUF_ACCESS_PB21 0x78 /* Control packet data buffer access window - PB21 */
+#define HDMI_CTRL_PKT_BUF_ACCESS_PB22 0x79 /* Control packet data buffer access window - PB22 */
+#define HDMI_CTRL_PKT_BUF_ACCESS_PB23 0x7A /* Control packet data buffer access window - PB23 */
+#define HDMI_CTRL_PKT_BUF_ACCESS_PB24 0x7B /* Control packet data buffer access window - PB24 */
+#define HDMI_CTRL_PKT_BUF_ACCESS_PB25 0x7C /* Control packet data buffer access window - PB25 */
+#define HDMI_CTRL_PKT_BUF_ACCESS_PB26 0x7D /* Control packet data buffer access window - PB26 */
+#define HDMI_CTRL_PKT_BUF_ACCESS_PB27 0x7E /* Control packet data buffer access window - PB27 */
+#define HDMI_EDID_KSV_FIFO_ACCESS_WINDOW 0x80 /* EDID/KSV FIFO access window */
+#define HDMI_DDC_BUS_ACCESS_FREQ_CTRL_7_0 0x81 /* DDC bus access frequency control (LSB) */
+#define HDMI_DDC_BUS_ACCESS_FREQ_CTRL_15_8 0x82 /* DDC bus access frequency control (MSB) */
+#define HDMI_INTERRUPT_MASK_1 0x92 /* Interrupt mask.1 */
+#define HDMI_INTERRUPT_MASK_2 0x93 /* Interrupt mask.2 */
+#define HDMI_INTERRUPT_STATUS_1 0x94 /* Interrupt status.1 */
+#define HDMI_INTERRUPT_STATUS_2 0x95 /* Interrupt status.2 */
+#define HDMI_INTERRUPT_MASK_3 0x96 /* Interrupt mask.3 */
+#define HDMI_INTERRUPT_MASK_4 0x97 /* Interrupt mask.4 */
+#define HDMI_INTERRUPT_STATUS_3 0x98 /* Interrupt status.3 */
+#define HDMI_INTERRUPT_STATUS_4 0x99 /* Interrupt status.4 */
+#define HDMI_SOFTWARE_HDCP_CONTROL_1 0x9A /* Software HDCP control.1 */
+#define HDMI_FRAME_COUNTER 0x9C /* Frame counter */
+#define HDMI_FRAME_COUNTER_FOR_RI_CHECK 0x9D /* Frame counter for Ri check */
+#define HDMI_HDCP_CONTROL 0xAF /* HDCP control */
+#define HDMI_RI_FRAME_COUNT_REGISTER 0xB2 /* Ri frame count register */
+#define HDMI_DDC_BUS_CONTROL 0xB7 /* DDC bus control */
+#define HDMI_HDCP_STATUS 0xB8 /* HDCP status */
+#define HDMI_SHA0 0xB9 /* sha0 */
+#define HDMI_SHA1 0xBA /* sha1 */
+#define HDMI_SHA2 0xBB /* sha2 */
+#define HDMI_SHA3 0xBC /* sha3 */
+#define HDMI_SHA4 0xBD /* sha4 */
+#define HDMI_BCAPS_READ 0xBE /* BCAPS read / debug */
+#define HDMI_AKSV_BKSV_7_0_MONITOR 0xBF /* AKSV/BKSV[7:0] monitor */
+#define HDMI_AKSV_BKSV_15_8_MONITOR 0xC0 /* AKSV/BKSV[15:8] monitor */
+#define HDMI_AKSV_BKSV_23_16_MONITOR 0xC1 /* AKSV/BKSV[23:16] monitor */
+#define HDMI_AKSV_BKSV_31_24_MONITOR 0xC2 /* AKSV/BKSV[31:24] monitor */
+#define HDMI_AKSV_BKSV_39_32_MONITOR 0xC3 /* AKSV/BKSV[39:32] monitor */
+#define HDMI_EDID_SEGMENT_POINTER 0xC4 /* EDID segment pointer */
+#define HDMI_EDID_WORD_ADDRESS 0xC5 /* EDID word address */
+#define HDMI_EDID_DATA_FIFO_ADDRESS 0xC6 /* EDID data FIFO address */
+#define HDMI_NUM_OF_HDMI_DEVICES 0xC7 /* Number of HDMI devices */
+#define HDMI_HDCP_ERROR_CODE 0xC8 /* HDCP error code */
+#define HDMI_100MS_TIMER_SET 0xC9 /* 100ms timer setting */
+#define HDMI_5SEC_TIMER_SET 0xCA /* 5sec timer setting */
+#define HDMI_RI_READ_COUNT 0xCB /* Ri read count */
+#define HDMI_AN_SEED 0xCC /* An seed */
+#define HDMI_MAX_NUM_OF_RCIVRS_ALLOWED 0xCD /* Maximum number of receivers allowed */
+#define HDMI_HDCP_MEMORY_ACCESS_CONTROL_1 0xCE /* HDCP memory access control.1 */
+#define HDMI_HDCP_MEMORY_ACCESS_CONTROL_2 0xCF /* HDCP memory access control.2 */
+#define HDMI_HDCP_CONTROL_2 0xD0 /* HDCP Control 2 */
+#define HDMI_HDCP_KEY_MEMORY_CONTROL 0xD2 /* HDCP Key Memory Control */
+#define HDMI_COLOR_SPACE_CONV_CONFIG_1 0xD3 /* Color space conversion configuration.1 */
+#define HDMI_VIDEO_SETTING_3 0xD4 /* Video setting.3 */
+#define HDMI_RI_7_0 0xD5 /* Ri[7:0] */
+#define HDMI_RI_15_8 0xD6 /* Ri[15:8] */
+#define HDMI_PJ 0xD7 /* Pj */
+#define HDMI_SHA_RD 0xD8 /* sha_rd */
+#define HDMI_RI_7_0_SAVED 0xD9 /* Ri[7:0] saved */
+#define HDMI_RI_15_8_SAVED 0xDA /* Ri[15:8] saved */
+#define HDMI_PJ_SAVED 0xDB /* Pj saved */
+#define HDMI_NUM_OF_DEVICES 0xDC /* Number of devices */
+#define HDMI_HOT_PLUG_MSENS_STATUS 0xDF /* Hot plug/MSENS status */
+#define HDMI_BCAPS_WRITE 0xE0 /* bcaps */
+#define HDMI_BSTAT_7_0 0xE1 /* bstat[7:0] */
+#define HDMI_BSTAT_15_8 0xE2 /* bstat[15:8] */
+#define HDMI_BKSV_7_0 0xE3 /* bksv[7:0] */
+#define HDMI_BKSV_15_8 0xE4 /* bksv[15:8] */
+#define HDMI_BKSV_23_16 0xE5 /* bksv[23:16] */
+#define HDMI_BKSV_31_24 0xE6 /* bksv[31:24] */
+#define HDMI_BKSV_39_32 0xE7 /* bksv[39:32] */
+#define HDMI_AN_7_0 0xE8 /* An[7:0] */
+#define HDMI_AN_15_8 0xE9 /* An [15:8] */
+#define HDMI_AN_23_16 0xEA /* An [23:16] */
+#define HDMI_AN_31_24 0xEB /* An [31:24] */
+#define HDMI_AN_39_32 0xEC /* An [39:32] */
+#define HDMI_AN_47_40 0xED /* An [47:40] */
+#define HDMI_AN_55_48 0xEE /* An [55:48] */
+#define HDMI_AN_63_56 0xEF /* An [63:56] */
+#define HDMI_PRODUCT_ID 0xF0 /* Product ID */
+#define HDMI_REVISION_ID 0xF1 /* Revision ID */
+#define HDMI_TEST_MODE 0xFE /* Test mode */
+
+enum hotplug_state {
+ HDMI_HOTPLUG_DISCONNECTED,
+ HDMI_HOTPLUG_CONNECTED,
+ HDMI_HOTPLUG_EDID_DONE,
+};
+
+struct sh_hdmi {
+ void __iomem *base;
+ enum hotplug_state hp_state;
+ struct clk *hdmi_clk;
+ struct device *dev;
+ struct fb_info *info;
+ struct delayed_work edid_work;
+ struct fb_var_screeninfo var;
+};
+
+static void hdmi_write(struct sh_hdmi *hdmi, u8 data, u8 reg)
+{
+ iowrite8(data, hdmi->base + reg);
+}
+
+static u8 hdmi_read(struct sh_hdmi *hdmi, u8 reg)
+{
+ return ioread8(hdmi->base + reg);
+}
+
+/* External video parameter settings */
+static void hdmi_external_video_param(struct sh_hdmi *hdmi)
+{
+ struct fb_var_screeninfo *var = &hdmi->var;
+ u16 htotal, hblank, hdelay, vtotal, vblank, vdelay, voffset;
+ u8 sync = 0;
+
+ htotal = var->xres + var->right_margin + var->left_margin + var->hsync_len;
+
+ hdelay = var->hsync_len + var->left_margin;
+ hblank = var->right_margin + hdelay;
+
+ /*
+ * Vertical timing looks a bit different in Figure 18,
+ * but let's try the same first by setting offset = 0
+ */
+ vtotal = var->yres + var->upper_margin + var->lower_margin + var->vsync_len;
+
+ vdelay = var->vsync_len + var->upper_margin;
+ vblank = var->lower_margin + vdelay;
+ voffset = min(var->upper_margin / 2, 6U);
+
+ /*
+ * [3]: VSYNC polarity: Positive
+ * [2]: HSYNC polarity: Positive
+ * [1]: Interlace/Progressive: Progressive
+ * [0]: External video settings enable: used.
+ */
+ if (var->sync & FB_SYNC_HOR_HIGH_ACT)
+ sync |= 4;
+ if (var->sync & FB_SYNC_VERT_HIGH_ACT)
+ sync |= 8;
+
+ pr_debug("H: %u, %u, %u, %u; V: %u, %u, %u, %u; sync 0x%x\n",
+ htotal, hblank, hdelay, var->hsync_len,
+ vtotal, vblank, vdelay, var->vsync_len, sync);
+
+ hdmi_write(hdmi, sync | (voffset << 4), HDMI_EXTERNAL_VIDEO_PARAM_SETTINGS);
+
+ hdmi_write(hdmi, htotal, HDMI_EXTERNAL_H_TOTAL_7_0);
+ hdmi_write(hdmi, htotal >> 8, HDMI_EXTERNAL_H_TOTAL_11_8);
+
+ hdmi_write(hdmi, hblank, HDMI_EXTERNAL_H_BLANK_7_0);
+ hdmi_write(hdmi, hblank >> 8, HDMI_EXTERNAL_H_BLANK_9_8);
+
+ hdmi_write(hdmi, hdelay, HDMI_EXTERNAL_H_DELAY_7_0);
+ hdmi_write(hdmi, hdelay >> 8, HDMI_EXTERNAL_H_DELAY_9_8);
+
+ hdmi_write(hdmi, var->hsync_len, HDMI_EXTERNAL_H_DURATION_7_0);
+ hdmi_write(hdmi, var->hsync_len >> 8, HDMI_EXTERNAL_H_DURATION_9_8);
+
+ hdmi_write(hdmi, vtotal, HDMI_EXTERNAL_V_TOTAL_7_0);
+ hdmi_write(hdmi, vtotal >> 8, HDMI_EXTERNAL_V_TOTAL_9_8);
+
+ hdmi_write(hdmi, vblank, HDMI_EXTERNAL_V_BLANK);
+
+ hdmi_write(hdmi, vdelay, HDMI_EXTERNAL_V_DELAY);
+
+ hdmi_write(hdmi, var->vsync_len, HDMI_EXTERNAL_V_DURATION);
+
+ /* Set bit 0 of HDMI_EXTERNAL_VIDEO_PARAM_SETTINGS here for manual mode */
+}
+
+/**
+ * sh_hdmi_video_config()
+ */
+static void sh_hdmi_video_config(struct sh_hdmi *hdmi)
+{
+ /*
+ * [7:4]: Audio sampling frequency: 48kHz
+ * [3:1]: Input video format: RGB and YCbCr 4:4:4 (Y on Green)
+ * [0]: Internal/External DE select: internal
+ */
+ hdmi_write(hdmi, 0x20, HDMI_AUDIO_VIDEO_SETTING_1);
+
+ /*
+ * [7:6]: Video output format: RGB 4:4:4
+ * [5:4]: Input video data width: 8 bit
+ * [3:1]: EAV/SAV location: channel 1
+ * [0]: Video input color space: RGB
+ */
+ hdmi_write(hdmi, 0x34, HDMI_VIDEO_SETTING_1);
+
+ /*
+ * [7:6]: Together with bit [6] of HDMI_AUDIO_VIDEO_SETTING_2, which is
+ * left at 0 by default, this configures 24bpp and sets the Color Depth
+ * (CD) field in the General Control Packet
+ */
+ hdmi_write(hdmi, 0x20, HDMI_DEEP_COLOR_MODES);
+}
+
+/**
+ * sh_hdmi_audio_config()
+ */
+static void sh_hdmi_audio_config(struct sh_hdmi *hdmi)
+{
+ /*
+ * [7:4] L/R data swap control
+ * [3:0] appropriate N[19:16]
+ */
+ hdmi_write(hdmi, 0x00, HDMI_L_R_DATA_SWAP_CTRL_RPKT);
+ /* appropriate N[15:8] */
+ hdmi_write(hdmi, 0x18, HDMI_20_BIT_N_FOR_AUDIO_RPKT_15_8);
+ /* appropriate N[7:0] */
+ hdmi_write(hdmi, 0x00, HDMI_20_BIT_N_FOR_AUDIO_RPKT_7_0);
+
+ /* [7:4] 48 kHz SPDIF not used */
+ hdmi_write(hdmi, 0x20, HDMI_SPDIF_AUDIO_SAMP_FREQ_CTS);
+
+ /*
+ * [6:5] set required down sampling rate if required
+ * [4:3] set required audio source
+ */
+ hdmi_write(hdmi, 0x00, HDMI_AUDIO_SETTING_1);
+
+ /* [3:0] set sending channel number for channel status */
+ hdmi_write(hdmi, 0x40, HDMI_AUDIO_SETTING_2);
+
+ /*
+ * [5:2] set valid I2S source input pin
+ * [1:0] set input I2S source mode
+ */
+ hdmi_write(hdmi, 0x04, HDMI_I2S_AUDIO_SET);
+
+ /* [7:4] set valid DSD source input pin */
+ hdmi_write(hdmi, 0x00, HDMI_DSD_AUDIO_SET);
+
+ /* [7:0] set appropriate I2S input pin swap settings if required */
+ hdmi_write(hdmi, 0x00, HDMI_I2S_INPUT_PIN_SWAP);
+
+ /*
+ * [7] set validity bit for channel status
+ * [3:0] set original sample frequency for channel status
+ */
+ hdmi_write(hdmi, 0x00, HDMI_AUDIO_STATUS_BITS_SETTING_1);
+
+ /*
+ * [7] set value for channel status
+ * [6] set value for channel status
+ * [5] set copyright bit for channel status
+ * [4:2] set additional information for channel status
+ * [1:0] set clock accuracy for channel status
+ */
+ hdmi_write(hdmi, 0x00, HDMI_AUDIO_STATUS_BITS_SETTING_2);
+
+ /* [7:0] set category code for channel status */
+ hdmi_write(hdmi, 0x00, HDMI_CATEGORY_CODE);
+
+ /*
+ * [7:4] set source number for channel status
+ * [3:0] set word length for channel status
+ */
+ hdmi_write(hdmi, 0x00, HDMI_SOURCE_NUM_AUDIO_WORD_LEN);
+
+ /* [7:4] set sample frequency for channel status */
+ hdmi_write(hdmi, 0x20, HDMI_AUDIO_VIDEO_SETTING_1);
+}
+
+/**
+ * sh_hdmi_phy_config()
+ */
+static void sh_hdmi_phy_config(struct sh_hdmi *hdmi)
+{
+ /* 720p, 8bit, 74.25MHz. Might need to be adjusted for other formats */
+ hdmi_write(hdmi, 0x19, HDMI_SLIPHDMIT_PARAM_SETTINGS_1);
+ hdmi_write(hdmi, 0x00, HDMI_SLIPHDMIT_PARAM_SETTINGS_2);
+ hdmi_write(hdmi, 0x00, HDMI_SLIPHDMIT_PARAM_SETTINGS_3);
+ /* PLLA_CONFIG[7:0]: VCO gain, VCO offset, LPF resistance[0] */
+ hdmi_write(hdmi, 0x44, HDMI_SLIPHDMIT_PARAM_SETTINGS_5);
+ hdmi_write(hdmi, 0x32, HDMI_SLIPHDMIT_PARAM_SETTINGS_6);
+ hdmi_write(hdmi, 0x4A, HDMI_SLIPHDMIT_PARAM_SETTINGS_7);
+ hdmi_write(hdmi, 0x0E, HDMI_SLIPHDMIT_PARAM_SETTINGS_8);
+ hdmi_write(hdmi, 0x25, HDMI_SLIPHDMIT_PARAM_SETTINGS_9);
+ hdmi_write(hdmi, 0x04, HDMI_SLIPHDMIT_PARAM_SETTINGS_10);
+}
+
+/**
+ * sh_hdmi_avi_infoframe_setup() - Auxiliary Video Information InfoFrame CONTROL PACKET
+ */
+static void sh_hdmi_avi_infoframe_setup(struct sh_hdmi *hdmi)
+{
+ /* AVI InfoFrame */
+ hdmi_write(hdmi, 0x06, HDMI_CTRL_PKT_BUF_INDEX);
+
+ /* Packet Type = 0x82 */
+ hdmi_write(hdmi, 0x82, HDMI_CTRL_PKT_BUF_ACCESS_HB0);
+
+ /* Version = 0x02 */
+ hdmi_write(hdmi, 0x02, HDMI_CTRL_PKT_BUF_ACCESS_HB1);
+
+ /* Length = 13 (0x0D) */
+ hdmi_write(hdmi, 0x0D, HDMI_CTRL_PKT_BUF_ACCESS_HB2);
+
+ /* N. A. Checksum */
+ hdmi_write(hdmi, 0x00, HDMI_CTRL_PKT_BUF_ACCESS_PB0);
+
+ /*
+ * Y = RGB
+ * A0 = No Data
+ * B = Bar Data not valid
+ * S = No Data
+ */
+ hdmi_write(hdmi, 0x00, HDMI_CTRL_PKT_BUF_ACCESS_PB1);
+
+ /*
+ * C = No Data
+ * M = 16:9 Picture Aspect Ratio
+ * R = Same as picture aspect ratio
+ */
+ hdmi_write(hdmi, 0x28, HDMI_CTRL_PKT_BUF_ACCESS_PB2);
+
+ /*
+ * ITC = No Data
+ * EC = xvYCC601
+ * Q = Default (depends on video format)
+ * SC = No Known non_uniform Scaling
+ */
+ hdmi_write(hdmi, 0x00, HDMI_CTRL_PKT_BUF_ACCESS_PB3);
+
+ /*
+ * VIC = 1280 x 720p: ignored if external config is used
+ * Send 2 for 720 x 480p, 16 for 1080p
+ */
+ hdmi_write(hdmi, 4, HDMI_CTRL_PKT_BUF_ACCESS_PB4);
+
+ /* PR = No Repetition */
+ hdmi_write(hdmi, 0x00, HDMI_CTRL_PKT_BUF_ACCESS_PB5);
+
+ /* Line Number of End of Top Bar (lower 8 bits) */
+ hdmi_write(hdmi, 0x00, HDMI_CTRL_PKT_BUF_ACCESS_PB6);
+
+ /* Line Number of End of Top Bar (upper 8 bits) */
+ hdmi_write(hdmi, 0x00, HDMI_CTRL_PKT_BUF_ACCESS_PB7);
+
+ /* Line Number of Start of Bottom Bar (lower 8 bits) */
+ hdmi_write(hdmi, 0x00, HDMI_CTRL_PKT_BUF_ACCESS_PB8);
+
+ /* Line Number of Start of Bottom Bar (upper 8 bits) */
+ hdmi_write(hdmi, 0x00, HDMI_CTRL_PKT_BUF_ACCESS_PB9);
+
+ /* Pixel Number of End of Left Bar (lower 8 bits) */
+ hdmi_write(hdmi, 0x00, HDMI_CTRL_PKT_BUF_ACCESS_PB10);
+
+ /* Pixel Number of End of Left Bar (upper 8 bits) */
+ hdmi_write(hdmi, 0x00, HDMI_CTRL_PKT_BUF_ACCESS_PB11);
+
+ /* Pixel Number of Start of Right Bar (lower 8 bits) */
+ hdmi_write(hdmi, 0x00, HDMI_CTRL_PKT_BUF_ACCESS_PB12);
+
+ /* Pixel Number of Start of Right Bar (upper 8 bits) */
+ hdmi_write(hdmi, 0x00, HDMI_CTRL_PKT_BUF_ACCESS_PB13);
+}
+
+/**
+ * sh_hdmi_audio_infoframe_setup() - Audio InfoFrame of CONTROL PACKET
+ */
+static void sh_hdmi_audio_infoframe_setup(struct sh_hdmi *hdmi)
+{
+ /* Audio InfoFrame */
+ hdmi_write(hdmi, 0x08, HDMI_CTRL_PKT_BUF_INDEX);
+
+ /* Packet Type = 0x84 */
+ hdmi_write(hdmi, 0x84, HDMI_CTRL_PKT_BUF_ACCESS_HB0);
+
+ /* Version Number = 0x01 */
+ hdmi_write(hdmi, 0x01, HDMI_CTRL_PKT_BUF_ACCESS_HB1);
+
+ /* 0 Length = 10 (0x0A) */
+ hdmi_write(hdmi, 0x0A, HDMI_CTRL_PKT_BUF_ACCESS_HB2);
+
+ /* n. a. Checksum */
+ hdmi_write(hdmi, 0x00, HDMI_CTRL_PKT_BUF_ACCESS_PB0);
+
+ /* Audio Channel Count = Refer to Stream Header */
+ hdmi_write(hdmi, 0x00, HDMI_CTRL_PKT_BUF_ACCESS_PB1);
+
+ /* Refer to Stream Header */
+ hdmi_write(hdmi, 0x00, HDMI_CTRL_PKT_BUF_ACCESS_PB2);
+
+ /* Format depends on coding type (i.e. CT0...CT3) */
+ hdmi_write(hdmi, 0x00, HDMI_CTRL_PKT_BUF_ACCESS_PB3);
+
+ /* Speaker Channel Allocation = Front Right + Front Left */
+ hdmi_write(hdmi, 0x00, HDMI_CTRL_PKT_BUF_ACCESS_PB4);
+
+ /* Level Shift Value = 0 dB, Down - mix is permitted or no information */
+ hdmi_write(hdmi, 0x00, HDMI_CTRL_PKT_BUF_ACCESS_PB5);
+
+ /* Reserved (0) */
+ hdmi_write(hdmi, 0x00, HDMI_CTRL_PKT_BUF_ACCESS_PB6);
+ hdmi_write(hdmi, 0x00, HDMI_CTRL_PKT_BUF_ACCESS_PB7);
+ hdmi_write(hdmi, 0x00, HDMI_CTRL_PKT_BUF_ACCESS_PB8);
+ hdmi_write(hdmi, 0x00, HDMI_CTRL_PKT_BUF_ACCESS_PB9);
+ hdmi_write(hdmi, 0x00, HDMI_CTRL_PKT_BUF_ACCESS_PB10);
+}
+
+/**
+ * sh_hdmi_gamut_metadata_setup() - Gamut Metadata Packet of CONTROL PACKET
+ */
+static void sh_hdmi_gamut_metadata_setup(struct sh_hdmi *hdmi)
+{
+ int i;
+
+ /* Gamut Metadata Packet */
+ hdmi_write(hdmi, 0x04, HDMI_CTRL_PKT_BUF_INDEX);
+
+ /* Packet Type = 0x0A */
+ hdmi_write(hdmi, 0x0A, HDMI_CTRL_PKT_BUF_ACCESS_HB0);
+ /* Gamut Packet is not used, so default value */
+ hdmi_write(hdmi, 0x00, HDMI_CTRL_PKT_BUF_ACCESS_HB1);
+ /* Gamut Packet is not used, so default value */
+ hdmi_write(hdmi, 0x10, HDMI_CTRL_PKT_BUF_ACCESS_HB2);
+
+ /* GBD bytes 0 through 27 */
+ for (i = 0; i <= 27; i++)
+ /* HDMI_CTRL_PKT_BUF_ACCESS_PB0_63H - PB27_7EH */
+ hdmi_write(hdmi, 0x00, HDMI_CTRL_PKT_BUF_ACCESS_PB0 + i);
+}
+
+/**
+ * sh_hdmi_acp_setup() - Audio Content Protection Packet (ACP)
+ */
+static void sh_hdmi_acp_setup(struct sh_hdmi *hdmi)
+{
+ int i;
+
+ /* Audio Content Protection Packet (ACP) */
+ hdmi_write(hdmi, 0x01, HDMI_CTRL_PKT_BUF_INDEX);
+
+ /* Packet Type = 0x04 */
+ hdmi_write(hdmi, 0x04, HDMI_CTRL_PKT_BUF_ACCESS_HB0);
+ /* ACP_Type */
+ hdmi_write(hdmi, 0x00, HDMI_CTRL_PKT_BUF_ACCESS_HB1);
+ /* Reserved (0) */
+ hdmi_write(hdmi, 0x00, HDMI_CTRL_PKT_BUF_ACCESS_HB2);
+
+ /* GBD bytes 0 through 27 */
+ for (i = 0; i <= 27; i++)
+ /* HDMI_CTRL_PKT_BUF_ACCESS_PB0 - PB27 */
+ hdmi_write(hdmi, 0x00, HDMI_CTRL_PKT_BUF_ACCESS_PB0 + i);
+}
+
+/**
+ * sh_hdmi_isrc1_setup() - ISRC1 Packet
+ */
+static void sh_hdmi_isrc1_setup(struct sh_hdmi *hdmi)
+{
+ int i;
+
+ /* ISRC1 Packet */
+ hdmi_write(hdmi, 0x02, HDMI_CTRL_PKT_BUF_INDEX);
+
+ /* Packet Type = 0x05 */
+ hdmi_write(hdmi, 0x05, HDMI_CTRL_PKT_BUF_ACCESS_HB0);
+ /* ISRC_Cont, ISRC_Valid, Reserved (0), ISRC_Status */
+ hdmi_write(hdmi, 0x00, HDMI_CTRL_PKT_BUF_ACCESS_HB1);
+ /* Reserved (0) */
+ hdmi_write(hdmi, 0x00, HDMI_CTRL_PKT_BUF_ACCESS_HB2);
+
+ /* PB0 UPC_EAN_ISRC_0-15 */
+ /* Bytes PB16-PB27 shall be set to a value of 0. */
+ for (i = 0; i <= 27; i++)
+ /* HDMI_CTRL_PKT_BUF_ACCESS_PB0 - PB27 */
+ hdmi_write(hdmi, 0x00, HDMI_CTRL_PKT_BUF_ACCESS_PB0 + i);
+}
+
+/**
+ * sh_hdmi_isrc2_setup() - ISRC2 Packet
+ */
+static void sh_hdmi_isrc2_setup(struct sh_hdmi *hdmi)
+{
+ int i;
+
+ /* ISRC2 Packet */
+ hdmi_write(hdmi, 0x03, HDMI_CTRL_PKT_BUF_INDEX);
+
+ /* HB0 Packet Type = 0x06 */
+ hdmi_write(hdmi, 0x06, HDMI_CTRL_PKT_BUF_ACCESS_HB0);
+ /* Reserved (0) */
+ hdmi_write(hdmi, 0x00, HDMI_CTRL_PKT_BUF_ACCESS_HB1);
+ /* Reserved (0) */
+ hdmi_write(hdmi, 0x00, HDMI_CTRL_PKT_BUF_ACCESS_HB2);
+
+ /* PB0 UPC_EAN_ISRC_16-31 */
+ /* Bytes PB16-PB27 shall be set to a value of 0. */
+ for (i = 0; i <= 27; i++)
+ /* HDMI_CTRL_PKT_BUF_ACCESS_PB0 - PB27 */
+ hdmi_write(hdmi, 0x00, HDMI_CTRL_PKT_BUF_ACCESS_PB0 + i);
+}
+
+/**
+ * sh_hdmi_configure() - Initialise HDMI for output
+ */
+static void sh_hdmi_configure(struct sh_hdmi *hdmi)
+{
+ /* Configure video format */
+ sh_hdmi_video_config(hdmi);
+
+ /* Configure audio format */
+ sh_hdmi_audio_config(hdmi);
+
+ /* Configure PHY */
+ sh_hdmi_phy_config(hdmi);
+
+ /* Auxiliary Video Information (AVI) InfoFrame */
+ sh_hdmi_avi_infoframe_setup(hdmi);
+
+ /* Audio InfoFrame */
+ sh_hdmi_audio_infoframe_setup(hdmi);
+
+ /* Gamut Metadata packet */
+ sh_hdmi_gamut_metadata_setup(hdmi);
+
+ /* Audio Content Protection (ACP) Packet */
+ sh_hdmi_acp_setup(hdmi);
+
+ /* ISRC1 Packet */
+ sh_hdmi_isrc1_setup(hdmi);
+
+ /* ISRC2 Packet */
+ sh_hdmi_isrc2_setup(hdmi);
+
+ /*
+ * Control packet auto send with VSYNC control: auto send
+ * General control, Gamut metadata, ISRC, and ACP packets
+ */
+ hdmi_write(hdmi, 0x8E, HDMI_CTRL_PKT_AUTO_SEND);
+
+ /* FIXME */
+ msleep(10);
+
+ /* PS mode b->d, reset PLLA and PLLB */
+ hdmi_write(hdmi, 0x4C, HDMI_SYSTEM_CTRL);
+
+ udelay(10);
+
+ hdmi_write(hdmi, 0x40, HDMI_SYSTEM_CTRL);
+}
+
+static void sh_hdmi_read_edid(struct sh_hdmi *hdmi)
+{
+ struct fb_var_screeninfo *var = &hdmi->var;
+ struct sh_mobile_hdmi_info *pdata = hdmi->dev->platform_data;
+ struct fb_videomode *lcd_cfg = &pdata->lcd_chan->lcd_cfg;
+ unsigned long height = var->height, width = var->width;
+ int i;
+ u8 edid[128];
+
+ /* Read EDID */
+ pr_debug("Read back EDID code:");
+ for (i = 0; i < 128; i++) {
+ edid[i] = hdmi_read(hdmi, HDMI_EDID_KSV_FIFO_ACCESS_WINDOW);
+#ifdef DEBUG
+ if ((i % 16) == 0) {
+ printk(KERN_CONT "\n");
+ printk(KERN_DEBUG "%02X | %02X", i, edid[i]);
+ } else {
+ printk(KERN_CONT " %02X", edid[i]);
+ }
+#endif
+ }
+#ifdef DEBUG
+ printk(KERN_CONT "\n");
+#endif
+ fb_parse_edid(edid, var);
+ pr_debug("%u-%u-%u-%u x %u-%u-%u-%u @ %lu kHz monitor detected\n",
+ var->left_margin, var->xres, var->right_margin, var->hsync_len,
+ var->upper_margin, var->yres, var->lower_margin, var->vsync_len,
+ PICOS2KHZ(var->pixclock));
+
+ /* FIXME: Use user-provided configuration instead of EDID */
+ var->width = width;
+ var->xres = lcd_cfg->xres;
+ var->xres_virtual = lcd_cfg->xres;
+ var->left_margin = lcd_cfg->left_margin;
+ var->right_margin = lcd_cfg->right_margin;
+ var->hsync_len = lcd_cfg->hsync_len;
+ var->height = height;
+ var->yres = lcd_cfg->yres;
+ var->yres_virtual = lcd_cfg->yres * 2;
+ var->upper_margin = lcd_cfg->upper_margin;
+ var->lower_margin = lcd_cfg->lower_margin;
+ var->vsync_len = lcd_cfg->vsync_len;
+ var->sync = lcd_cfg->sync;
+ var->pixclock = lcd_cfg->pixclock;
+
+ hdmi_external_video_param(hdmi);
+}
+
+static irqreturn_t sh_hdmi_hotplug(int irq, void *dev_id)
+{
+ struct sh_hdmi *hdmi = dev_id;
+ u8 status1, status2, mask1, mask2;
+
+ /* mode_b and PLLA and PLLB reset */
+ hdmi_write(hdmi, 0x2C, HDMI_SYSTEM_CTRL);
+
+ /* How long shall reset be held? */
+ udelay(10);
+
+ /* mode_b and PLLA and PLLB reset release */
+ hdmi_write(hdmi, 0x20, HDMI_SYSTEM_CTRL);
+
+ status1 = hdmi_read(hdmi, HDMI_INTERRUPT_STATUS_1);
+ status2 = hdmi_read(hdmi, HDMI_INTERRUPT_STATUS_2);
+
+ mask1 = hdmi_read(hdmi, HDMI_INTERRUPT_MASK_1);
+ mask2 = hdmi_read(hdmi, HDMI_INTERRUPT_MASK_2);
+
+ /* Correct would be to ack only set bits, but the datasheet requires 0xff */
+ hdmi_write(hdmi, 0xFF, HDMI_INTERRUPT_STATUS_1);
+ hdmi_write(hdmi, 0xFF, HDMI_INTERRUPT_STATUS_2);
+
+ if (printk_ratelimit())
+ pr_debug("IRQ #%d: Status #1: 0x%x & 0x%x, #2: 0x%x & 0x%x\n",
+ irq, status1, mask1, status2, mask2);
+
+ if (!((status1 & mask1) | (status2 & mask2))) {
+ return IRQ_NONE;
+ } else if (status1 & 0xc0) {
+ u8 msens;
+
+ /* Datasheet specifies 10ms... */
+ udelay(500);
+
+ msens = hdmi_read(hdmi, HDMI_HOT_PLUG_MSENS_STATUS);
+ pr_debug("MSENS 0x%x\n", msens);
+ /* Check, if hot plug & MSENS pin status are both high */
+ if ((msens & 0xC0) == 0xC0) {
+ /* Display plug in */
+ hdmi->hp_state = HDMI_HOTPLUG_CONNECTED;
+
+ /* Set EDID word address */
+ hdmi_write(hdmi, 0x00, HDMI_EDID_WORD_ADDRESS);
+ /* Set EDID segment pointer */
+ hdmi_write(hdmi, 0x00, HDMI_EDID_SEGMENT_POINTER);
+ /* Enable EDID interrupt */
+ hdmi_write(hdmi, 0xC6, HDMI_INTERRUPT_MASK_1);
+ } else if (!(status1 & 0x80)) {
+ /* Display unplug, beware multiple interrupts */
+ if (hdmi->hp_state != HDMI_HOTPLUG_DISCONNECTED)
+ schedule_delayed_work(&hdmi->edid_work, 0);
+
+ hdmi->hp_state = HDMI_HOTPLUG_DISCONNECTED;
+ /* display_off will switch back to mode_a */
+ }
+ } else if (status1 & 2) {
+ /* EDID error interrupt: retry */
+ /* Set EDID word address */
+ hdmi_write(hdmi, 0x00, HDMI_EDID_WORD_ADDRESS);
+ /* Set EDID segment pointer */
+ hdmi_write(hdmi, 0x00, HDMI_EDID_SEGMENT_POINTER);
+ } else if (status1 & 4) {
+ /* Disable EDID interrupt */
+ hdmi_write(hdmi, 0xC0, HDMI_INTERRUPT_MASK_1);
+ hdmi->hp_state = HDMI_HOTPLUG_EDID_DONE;
+ schedule_delayed_work(&hdmi->edid_work, msecs_to_jiffies(10));
+ }
+
+ return IRQ_HANDLED;
+}
+
+static void hdmi_display_on(void *arg, struct fb_info *info)
+{
+ struct sh_hdmi *hdmi = arg;
+ struct sh_mobile_hdmi_info *pdata = hdmi->dev->platform_data;
+
+ if (info->var.xres != 1280 || info->var.yres != 720) {
+ dev_warn(info->device, "Unsupported framebuffer geometry %ux%u\n",
+ info->var.xres, info->var.yres);
+ return;
+ }
+
+ pr_debug("%s(%p): state %x\n", __func__, pdata->lcd_dev, info->state);
+ /*
+ * FIXME: not a good place to store fb_info. And we cannot nullify it
+ * even on monitor disconnect. What should the lifecycle be?
+ */
+ hdmi->info = info;
+ switch (hdmi->hp_state) {
+ case HDMI_HOTPLUG_EDID_DONE:
+ /* PS mode d->e. All functions are active */
+ hdmi_write(hdmi, 0x80, HDMI_SYSTEM_CTRL);
+ pr_debug("HDMI running\n");
+ break;
+ case HDMI_HOTPLUG_DISCONNECTED:
+ info->state = FBINFO_STATE_SUSPENDED;
+ default:
+ hdmi->var = info->var;
+ }
+}
+
+static void hdmi_display_off(void *arg)
+{
+ struct sh_hdmi *hdmi = arg;
+ struct sh_mobile_hdmi_info *pdata = hdmi->dev->platform_data;
+
+ pr_debug("%s(%p)\n", __func__, pdata->lcd_dev);
+ /* PS mode e->a */
+ hdmi_write(hdmi, 0x10, HDMI_SYSTEM_CTRL);
+}
+
+/* Hotplug interrupt occurred, read EDID */
+static void edid_work_fn(struct work_struct *work)
+{
+ struct sh_hdmi *hdmi = container_of(work, struct sh_hdmi, edid_work.work);
+ struct sh_mobile_hdmi_info *pdata = hdmi->dev->platform_data;
+
+ pr_debug("%s(%p): begin, hotplug status %d\n", __func__,
+ pdata->lcd_dev, hdmi->hp_state);
+
+ if (!pdata->lcd_dev)
+ return;
+
+ if (hdmi->hp_state == HDMI_HOTPLUG_EDID_DONE) {
+ pm_runtime_get_sync(hdmi->dev);
+ /* A device has been plugged in */
+ sh_hdmi_read_edid(hdmi);
+ msleep(10);
+ sh_hdmi_configure(hdmi);
+ /* Switched to another (d) power-save mode */
+ msleep(10);
+
+ if (!hdmi->info)
+ return;
+
+ acquire_console_sem();
+
+ /* HDMI plug in */
+ hdmi->info->var = hdmi->var;
+ if (hdmi->info->state != FBINFO_STATE_RUNNING)
+ fb_set_suspend(hdmi->info, 0);
+ else
+ hdmi_display_on(hdmi, hdmi->info);
+
+ release_console_sem();
+ } else {
+ if (!hdmi->info)
+ return;
+
+ acquire_console_sem();
+
+ /* HDMI disconnect */
+ fb_set_suspend(hdmi->info, 1);
+
+ release_console_sem();
+ pm_runtime_put(hdmi->dev);
+ }
+
+ pr_debug("%s(%p): end\n", __func__, pdata->lcd_dev);
+}
+
+static int __init sh_hdmi_probe(struct platform_device *pdev)
+{
+ struct sh_mobile_hdmi_info *pdata = pdev->dev.platform_data;
+ struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ int irq = platform_get_irq(pdev, 0), ret;
+ struct sh_hdmi *hdmi;
+ long rate;
+
+ if (!res || !pdata || irq < 0)
+ return -ENODEV;
+
+ hdmi = kzalloc(sizeof(*hdmi), GFP_KERNEL);
+ if (!hdmi) {
+ dev_err(&pdev->dev, "Cannot allocate device data\n");
+ return -ENOMEM;
+ }
+
+ hdmi->dev = &pdev->dev;
+
+ hdmi->hdmi_clk = clk_get(&pdev->dev, "ick");
+ if (IS_ERR(hdmi->hdmi_clk)) {
+ ret = PTR_ERR(hdmi->hdmi_clk);
+ dev_err(&pdev->dev, "Unable to get clock: %d\n", ret);
+ goto egetclk;
+ }
+
+ rate = PICOS2KHZ(pdata->lcd_chan->lcd_cfg.pixclock) * 1000;
+
+ rate = clk_round_rate(hdmi->hdmi_clk, rate);
+ if (rate < 0) {
+ ret = rate;
+ dev_err(&pdev->dev, "Cannot get suitable rate: %ld\n", rate);
+ goto erate;
+ }
+
+ ret = clk_set_rate(hdmi->hdmi_clk, rate);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "Cannot set rate %ld: %d\n", rate, ret);
+ goto erate;
+ }
+
+ pr_debug("HDMI set frequency %lu\n", rate);
+
+ ret = clk_enable(hdmi->hdmi_clk);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "Cannot enable clock: %d\n", ret);
+ goto eclkenable;
+ }
+
+ dev_info(&pdev->dev, "Enabled HDMI clock at %luHz\n", rate);
+
+ if (!request_mem_region(res->start, resource_size(res), dev_name(&pdev->dev))) {
+ dev_err(&pdev->dev, "HDMI register region already claimed\n");
+ ret = -EBUSY;
+ goto ereqreg;
+ }
+
+ hdmi->base = ioremap(res->start, resource_size(res));
+ if (!hdmi->base) {
+ dev_err(&pdev->dev, "HDMI register region already claimed\n");
+ ret = -ENOMEM;
+ goto emap;
+ }
+
+ platform_set_drvdata(pdev, hdmi);
+
+#if 1
+ /* Product and revision IDs are 0 in sh-mobile version */
+ dev_info(&pdev->dev, "Detected HDMI controller 0x%x:0x%x\n",
+ hdmi_read(hdmi, HDMI_PRODUCT_ID), hdmi_read(hdmi, HDMI_REVISION_ID));
+#endif
+
+ /* Set up LCDC callbacks */
+ pdata->lcd_chan->board_cfg.board_data = hdmi;
+ pdata->lcd_chan->board_cfg.display_on = hdmi_display_on;
+ pdata->lcd_chan->board_cfg.display_off = hdmi_display_off;
+
+ INIT_DELAYED_WORK(&hdmi->edid_work, edid_work_fn);
+
+ pm_runtime_enable(&pdev->dev);
+ pm_runtime_resume(&pdev->dev);
+
+ ret = request_irq(irq, sh_hdmi_hotplug, 0,
+ dev_name(&pdev->dev), hdmi);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "Unable to request irq: %d\n", ret);
+ goto ereqirq;
+ }
+
+ return 0;
+
+ereqirq:
+ pm_runtime_disable(&pdev->dev);
+ iounmap(hdmi->base);
+emap:
+ release_mem_region(res->start, resource_size(res));
+ereqreg:
+ clk_disable(hdmi->hdmi_clk);
+eclkenable:
+erate:
+ clk_put(hdmi->hdmi_clk);
+egetclk:
+ kfree(hdmi);
+
+ return ret;
+}
+
+static int __exit sh_hdmi_remove(struct platform_device *pdev)
+{
+ struct sh_mobile_hdmi_info *pdata = pdev->dev.platform_data;
+ struct sh_hdmi *hdmi = platform_get_drvdata(pdev);
+ struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ int irq = platform_get_irq(pdev, 0);
+
+ pdata->lcd_chan->board_cfg.display_on = NULL;
+ pdata->lcd_chan->board_cfg.display_off = NULL;
+ pdata->lcd_chan->board_cfg.board_data = NULL;
+
+ free_irq(irq, hdmi);
+ pm_runtime_disable(&pdev->dev);
+ cancel_delayed_work_sync(&hdmi->edid_work);
+ clk_disable(hdmi->hdmi_clk);
+ clk_put(hdmi->hdmi_clk);
+ iounmap(hdmi->base);
+ release_mem_region(res->start, resource_size(res));
+ kfree(hdmi);
+
+ return 0;
+}
+
+static struct platform_driver sh_hdmi_driver = {
+ .remove = __exit_p(sh_hdmi_remove),
+ .driver = {
+ .name = "sh-mobile-hdmi",
+ },
+};
+
+static int __init sh_hdmi_init(void)
+{
+ return platform_driver_probe(&sh_hdmi_driver, sh_hdmi_probe);
+}
+module_init(sh_hdmi_init);
+
+static void __exit sh_hdmi_exit(void)
+{
+ platform_driver_unregister(&sh_hdmi_driver);
+}
+module_exit(sh_hdmi_exit);
+
+MODULE_AUTHOR("Guennadi Liakhovetski <g.liakhovetski@gmx.de>");
+MODULE_DESCRIPTION("SuperH / ARM-shmobile HDMI driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/video/sh_mobile_lcdcfb.c b/drivers/video/sh_mobile_lcdcfb.c
index 12c451a711e9..d72075a9f01c 100644
--- a/drivers/video/sh_mobile_lcdcfb.c
+++ b/drivers/video/sh_mobile_lcdcfb.c
@@ -56,6 +56,7 @@ static int lcdc_shared_regs[] = {
/* per-channel registers */
enum { LDDCKPAT1R, LDDCKPAT2R, LDMT1R, LDMT2R, LDMT3R, LDDFR, LDSM1R,
LDSM2R, LDSA1R, LDMLSR, LDHCNR, LDHSYNR, LDVLNR, LDVSYNR, LDPMR,
+ LDHAJR,
NR_CH_REGS };
static unsigned long lcdc_offs_mainlcd[NR_CH_REGS] = {
@@ -74,6 +75,7 @@ static unsigned long lcdc_offs_mainlcd[NR_CH_REGS] = {
[LDVLNR] = 0x450,
[LDVSYNR] = 0x454,
[LDPMR] = 0x460,
+ [LDHAJR] = 0x4a0,
};
static unsigned long lcdc_offs_sublcd[NR_CH_REGS] = {
@@ -137,6 +139,7 @@ struct sh_mobile_lcdc_priv {
struct clk *dot_clk;
unsigned long lddckr;
struct sh_mobile_lcdc_chan ch[2];
+ struct notifier_block notifier;
unsigned long saved_shared_regs[NR_SHARED_REGS];
int started;
};
@@ -404,6 +407,56 @@ static void sh_mobile_lcdc_start_stop(struct sh_mobile_lcdc_priv *priv,
lcdc_write(priv, _LDDCKSTPR, 1); /* stop dotclock */
}
+static void sh_mobile_lcdc_geometry(struct sh_mobile_lcdc_chan *ch)
+{
+ struct fb_var_screeninfo *var = &ch->info->var;
+ unsigned long h_total, hsync_pos;
+ u32 tmp;
+
+ tmp = ch->ldmt1r_value;
+ tmp |= (var->sync & FB_SYNC_VERT_HIGH_ACT) ? 0 : 1 << 28;
+ tmp |= (var->sync & FB_SYNC_HOR_HIGH_ACT) ? 0 : 1 << 27;
+ tmp |= (ch->cfg.flags & LCDC_FLAGS_DWPOL) ? 1 << 26 : 0;
+ tmp |= (ch->cfg.flags & LCDC_FLAGS_DIPOL) ? 1 << 25 : 0;
+ tmp |= (ch->cfg.flags & LCDC_FLAGS_DAPOL) ? 1 << 24 : 0;
+ tmp |= (ch->cfg.flags & LCDC_FLAGS_HSCNT) ? 1 << 17 : 0;
+ tmp |= (ch->cfg.flags & LCDC_FLAGS_DWCNT) ? 1 << 16 : 0;
+ lcdc_write_chan(ch, LDMT1R, tmp);
+
+ /* setup SYS bus */
+ lcdc_write_chan(ch, LDMT2R, ch->cfg.sys_bus_cfg.ldmt2r);
+ lcdc_write_chan(ch, LDMT3R, ch->cfg.sys_bus_cfg.ldmt3r);
+
+ /* horizontal configuration */
+ h_total = var->xres + var->hsync_len +
+ var->left_margin + var->right_margin;
+ tmp = h_total / 8; /* HTCN */
+ tmp |= (var->xres / 8) << 16; /* HDCN */
+ lcdc_write_chan(ch, LDHCNR, tmp);
+
+ hsync_pos = var->xres + var->right_margin;
+ tmp = hsync_pos / 8; /* HSYNP */
+ tmp |= (var->hsync_len / 8) << 16; /* HSYNW */
+ lcdc_write_chan(ch, LDHSYNR, tmp);
+
+ /* vertical configuration */
+ tmp = var->yres + var->vsync_len +
+ var->upper_margin + var->lower_margin; /* VTLN */
+ tmp |= var->yres << 16; /* VDLN */
+ lcdc_write_chan(ch, LDVLNR, tmp);
+
+ tmp = var->yres + var->lower_margin; /* VSYNP */
+ tmp |= var->vsync_len << 16; /* VSYNW */
+ lcdc_write_chan(ch, LDVSYNR, tmp);
+
+ /* Adjust horizontal synchronisation for HDMI */
+ tmp = ((var->xres & 7) << 24) |
+ ((h_total & 7) << 16) |
+ ((var->hsync_len & 7) << 8) |
+ hsync_pos;
+ lcdc_write_chan(ch, LDHAJR, tmp);
+}
+
static int sh_mobile_lcdc_start(struct sh_mobile_lcdc_priv *priv)
{
struct sh_mobile_lcdc_chan *ch;
@@ -470,49 +523,11 @@ static int sh_mobile_lcdc_start(struct sh_mobile_lcdc_priv *priv)
if (!ch->enabled)
continue;
- tmp = ch->ldmt1r_value;
- tmp |= (lcd_cfg->sync & FB_SYNC_VERT_HIGH_ACT) ? 0 : 1 << 28;
- tmp |= (lcd_cfg->sync & FB_SYNC_HOR_HIGH_ACT) ? 0 : 1 << 27;
- tmp |= (ch->cfg.flags & LCDC_FLAGS_DWPOL) ? 1 << 26 : 0;
- tmp |= (ch->cfg.flags & LCDC_FLAGS_DIPOL) ? 1 << 25 : 0;
- tmp |= (ch->cfg.flags & LCDC_FLAGS_DAPOL) ? 1 << 24 : 0;
- tmp |= (ch->cfg.flags & LCDC_FLAGS_HSCNT) ? 1 << 17 : 0;
- tmp |= (ch->cfg.flags & LCDC_FLAGS_DWCNT) ? 1 << 16 : 0;
- lcdc_write_chan(ch, LDMT1R, tmp);
-
- /* setup SYS bus */
- lcdc_write_chan(ch, LDMT2R, ch->cfg.sys_bus_cfg.ldmt2r);
- lcdc_write_chan(ch, LDMT3R, ch->cfg.sys_bus_cfg.ldmt3r);
-
- /* horizontal configuration */
- tmp = lcd_cfg->xres + lcd_cfg->hsync_len;
- tmp += lcd_cfg->left_margin;
- tmp += lcd_cfg->right_margin;
- tmp /= 8; /* HTCN */
- tmp |= (lcd_cfg->xres / 8) << 16; /* HDCN */
- lcdc_write_chan(ch, LDHCNR, tmp);
-
- tmp = lcd_cfg->xres;
- tmp += lcd_cfg->right_margin;
- tmp /= 8; /* HSYNP */
- tmp |= (lcd_cfg->hsync_len / 8) << 16; /* HSYNW */
- lcdc_write_chan(ch, LDHSYNR, tmp);
+ sh_mobile_lcdc_geometry(ch);
/* power supply */
lcdc_write_chan(ch, LDPMR, 0);
- /* vertical configuration */
- tmp = lcd_cfg->yres + lcd_cfg->vsync_len;
- tmp += lcd_cfg->upper_margin;
- tmp += lcd_cfg->lower_margin; /* VTLN */
- tmp |= lcd_cfg->yres << 16; /* VDLN */
- lcdc_write_chan(ch, LDVLNR, tmp);
-
- tmp = lcd_cfg->yres;
- tmp += lcd_cfg->lower_margin; /* VSYNP */
- tmp |= lcd_cfg->vsync_len << 16; /* VSYNW */
- lcdc_write_chan(ch, LDVSYNR, tmp);
-
board_cfg = &ch->cfg.board_cfg;
if (board_cfg->setup_sys)
ret = board_cfg->setup_sys(board_cfg->board_data, ch,
@@ -577,7 +592,7 @@ static int sh_mobile_lcdc_start(struct sh_mobile_lcdc_priv *priv)
board_cfg = &ch->cfg.board_cfg;
if (board_cfg->display_on)
- board_cfg->display_on(board_cfg->board_data);
+ board_cfg->display_on(board_cfg->board_data, ch->info);
}
return 0;
@@ -943,6 +958,62 @@ static const struct dev_pm_ops sh_mobile_lcdc_dev_pm_ops = {
.runtime_resume = sh_mobile_lcdc_runtime_resume,
};
+static int sh_mobile_lcdc_notify(struct notifier_block *nb,
+ unsigned long action, void *data)
+{
+ struct fb_event *event = data;
+ struct fb_info *info = event->info;
+ struct sh_mobile_lcdc_chan *ch = info->par;
+ struct sh_mobile_lcdc_board_cfg *board_cfg = &ch->cfg.board_cfg;
+ struct fb_var_screeninfo *var;
+
+ if (&ch->lcdc->notifier != nb)
+ return 0;
+
+ dev_dbg(info->dev, "%s(): action = %lu, data = %p\n",
+ __func__, action, event->data);
+
+ switch(action) {
+ case FB_EVENT_SUSPEND:
+ if (board_cfg->display_off)
+ board_cfg->display_off(board_cfg->board_data);
+ pm_runtime_put(info->device);
+ break;
+ case FB_EVENT_RESUME:
+ var = &info->var;
+
+ /* HDMI must be enabled before LCDC configuration */
+ if (board_cfg->display_on)
+ board_cfg->display_on(board_cfg->board_data, ch->info);
+
+ /* Check if the new display is not in our modelist */
+ if (ch->info->modelist.next &&
+ !fb_match_mode(var, &ch->info->modelist)) {
+ struct fb_videomode mode;
+ int ret;
+
+ /* Can we handle this display? */
+ if (var->xres > ch->cfg.lcd_cfg.xres ||
+ var->yres > ch->cfg.lcd_cfg.yres)
+ return -ENOMEM;
+
+ /* Add to the modelist */
+ fb_var_to_videomode(&mode, var);
+ ret = fb_add_videomode(&mode, &ch->info->modelist);
+ if (ret < 0)
+ return ret;
+ }
+
+ pm_runtime_get_sync(info->device);
+
+ sh_mobile_lcdc_geometry(ch);
+
+ break;
+ }
+
+ return 0;
+}
+
static int sh_mobile_lcdc_remove(struct platform_device *pdev);
static int __devinit sh_mobile_lcdc_probe(struct platform_device *pdev)
@@ -1020,15 +1091,19 @@ static int __devinit sh_mobile_lcdc_probe(struct platform_device *pdev)
goto err1;
}
+ priv->base = ioremap_nocache(res->start, resource_size(res));
+ if (!priv->base)
+ goto err1;
+
error = sh_mobile_lcdc_setup_clocks(pdev, pdata->clock_source, priv);
if (error) {
dev_err(&pdev->dev, "unable to setup clocks\n");
goto err1;
}
- priv->base = ioremap_nocache(res->start, (res->end - res->start) + 1);
-
for (i = 0; i < j; i++) {
+ struct fb_var_screeninfo *var;
+ struct fb_videomode *lcd_cfg;
cfg = &priv->ch[i].cfg;
priv->ch[i].info = framebuffer_alloc(0, &pdev->dev);
@@ -1039,22 +1114,33 @@ static int __devinit sh_mobile_lcdc_probe(struct platform_device *pdev)
}
info = priv->ch[i].info;
+ var = &info->var;
+ lcd_cfg = &cfg->lcd_cfg;
info->fbops = &sh_mobile_lcdc_ops;
- info->var.xres = info->var.xres_virtual = cfg->lcd_cfg.xres;
- info->var.yres = cfg->lcd_cfg.yres;
+ var->xres = var->xres_virtual = lcd_cfg->xres;
+ var->yres = lcd_cfg->yres;
/* Default Y virtual resolution is 2x panel size */
- info->var.yres_virtual = info->var.yres * 2;
- info->var.width = cfg->lcd_size_cfg.width;
- info->var.height = cfg->lcd_size_cfg.height;
- info->var.activate = FB_ACTIVATE_NOW;
- error = sh_mobile_lcdc_set_bpp(&info->var, cfg->bpp);
+ var->yres_virtual = var->yres * 2;
+ var->width = cfg->lcd_size_cfg.width;
+ var->height = cfg->lcd_size_cfg.height;
+ var->activate = FB_ACTIVATE_NOW;
+ var->left_margin = lcd_cfg->left_margin;
+ var->right_margin = lcd_cfg->right_margin;
+ var->upper_margin = lcd_cfg->upper_margin;
+ var->lower_margin = lcd_cfg->lower_margin;
+ var->hsync_len = lcd_cfg->hsync_len;
+ var->vsync_len = lcd_cfg->vsync_len;
+ var->sync = lcd_cfg->sync;
+ var->pixclock = lcd_cfg->pixclock;
+
+ error = sh_mobile_lcdc_set_bpp(var, cfg->bpp);
if (error)
break;
info->fix = sh_mobile_lcdc_fix;
- info->fix.line_length = cfg->lcd_cfg.xres * (cfg->bpp / 8);
+ info->fix.line_length = lcd_cfg->xres * (cfg->bpp / 8);
info->fix.smem_len = info->fix.line_length *
- info->var.yres_virtual;
+ var->yres_virtual;
buf = dma_alloc_coherent(&pdev->dev, info->fix.smem_len,
&priv->ch[i].dma_handle, GFP_KERNEL);
@@ -1119,10 +1205,14 @@ static int __devinit sh_mobile_lcdc_probe(struct platform_device *pdev)
ch->cfg.bpp);
/* deferred io mode: disable clock to save power */
- if (info->fbdefio)
+ if (info->fbdefio || info->state == FBINFO_STATE_SUSPENDED)
sh_mobile_lcdc_clk_off(priv);
}
+ /* Failure ignored */
+ priv->notifier.notifier_call = sh_mobile_lcdc_notify;
+ fb_register_client(&priv->notifier);
+
return 0;
err1:
sh_mobile_lcdc_remove(pdev);
@@ -1136,6 +1226,8 @@ static int sh_mobile_lcdc_remove(struct platform_device *pdev)
struct fb_info *info;
int i;
+ fb_unregister_client(&priv->notifier);
+
for (i = 0; i < ARRAY_SIZE(priv->ch); i++)
if (priv->ch[i].info && priv->ch[i].info->dev)
unregister_framebuffer(priv->ch[i].info);