1 files changed, 139 insertions, 0 deletions
diff --git a/include/asm-arm/arch-ebsa285/hardware.h b/include/asm-arm/arch-ebsa285/hardware.h
new file mode 100644
index 000000000000..2ef2200f108c
--- /dev/null
+++ b/include/asm-arm/arch-ebsa285/hardware.h
@@ -0,0 +1,139 @@
+/*
+ *  linux/include/asm-arm/arch-ebsa285/hardware.h
+ *
+ *  Copyright (C) 1998-1999 Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  This file contains the hardware definitions of the EBSA-285.
+ */
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#include <linux/config.h>
+#include <asm/arch/memory.h>
+
+#ifdef CONFIG_ARCH_FOOTBRIDGE
+/*   Virtual      Physical	Size
+ * 0xff800000	0x40000000	1MB	X-Bus
+ * 0xff000000	0x7c000000	1MB	PCI I/O space
+ * 0xfe000000	0x42000000	1MB	CSR
+ * 0xfd000000	0x78000000	1MB	Outbound write flush (not supported)
+ * 0xfc000000	0x79000000	1MB	PCI IACK/special space
+ * 0xfb000000	0x7a000000	16MB	PCI Config type 1
+ * 0xfa000000	0x7b000000	16MB	PCI Config type 0
+ * 0xf9000000	0x50000000	1MB	Cache flush
+ * 0xf0000000	0x80000000	16MB	ISA memory
+ */
+#define XBUS_SIZE		0x00100000
+#define XBUS_BASE		0xff800000
+
+#define PCIO_SIZE		0x00100000
+#define PCIO_BASE		0xff000000
+
+#define ARMCSR_SIZE		0x00100000
+#define ARMCSR_BASE		0xfe000000
+
+#define WFLUSH_SIZE		0x00100000
+#define WFLUSH_BASE		0xfd000000
+
+#define PCIIACK_SIZE		0x00100000
+#define PCIIACK_BASE		0xfc000000
+
+#define PCICFG1_SIZE		0x01000000
+#define PCICFG1_BASE		0xfb000000
+
+#define PCICFG0_SIZE		0x01000000
+#define PCICFG0_BASE		0xfa000000
+
+#define FLUSH_SIZE		0x00100000
+#define FLUSH_BASE		0xf9000000
+
+#define PCIMEM_SIZE		0x01000000
+#define PCIMEM_BASE		0xf0000000
+
+#elif defined(CONFIG_ARCH_CO285)
+/*
+ * This is the COEBSA285 cut-down mapping
+ */
+#define PCIMEM_SIZE		0x80000000
+#define PCIMEM_BASE		0x80000000
+
+#define FLUSH_SIZE		0x00100000
+#define FLUSH_BASE		0x7e000000
+
+#define WFLUSH_SIZE		0x01000000
+#define WFLUSH_BASE		0x7d000000
+
+#define ARMCSR_SIZE		0x00100000
+#define ARMCSR_BASE		0x7cf00000
+
+#define XBUS_SIZE		0x00020000
+#define XBUS_BASE		0x7cee0000
+
+#define PCIO_SIZE		0x00010000
+#define PCIO_BASE		0x7ced0000
+
+#else
+
+#error "Undefined footbridge architecture"
+
+#endif
+
+#define XBUS_LEDS		((volatile unsigned char *)(XBUS_BASE + 0x12000))
+#define XBUS_LED_AMBER		(1 << 0)
+#define XBUS_LED_GREEN		(1 << 1)
+#define XBUS_LED_RED		(1 << 2)
+#define XBUS_LED_TOGGLE		(1 << 8)
+
+#define XBUS_SWITCH		((volatile unsigned char *)(XBUS_BASE + 0x12000))
+#define XBUS_SWITCH_SWITCH	((*XBUS_SWITCH) & 15)
+#define XBUS_SWITCH_J17_13	((*XBUS_SWITCH) & (1 << 4))
+#define XBUS_SWITCH_J17_11	((*XBUS_SWITCH) & (1 << 5))
+#define XBUS_SWITCH_J17_9	((*XBUS_SWITCH) & (1 << 6))
+
+#define FLUSH_BASE_PHYS		0x50000000
+#define UNCACHEABLE_ADDR	(ARMCSR_BASE + 0x108)
+
+
+/* PIC irq control */
+#define PIC_LO			0x20
+#define PIC_MASK_LO		0x21
+#define PIC_HI			0xA0
+#define PIC_MASK_HI		0xA1
+
+/* GPIO pins */
+#define GPIO_CCLK		0x800
+#define GPIO_DSCLK		0x400
+#define GPIO_E2CLK		0x200
+#define GPIO_IOLOAD		0x100
+#define GPIO_RED_LED		0x080
+#define GPIO_WDTIMER		0x040
+#define GPIO_DATA		0x020
+#define GPIO_IOCLK		0x010
+#define GPIO_DONE		0x008
+#define GPIO_FAN		0x004
+#define GPIO_GREEN_LED		0x002
+#define GPIO_RESET		0x001
+
+/* CPLD pins */
+#define CPLD_DS_ENABLE		8
+#define CPLD_7111_DISABLE	4
+#define CPLD_UNMUTE		2
+#define CPLD_FLASH_WR_ENABLE	1
+
+#ifndef __ASSEMBLY__
+extern void gpio_modify_op(int mask, int set);
+extern void gpio_modify_io(int mask, int in);
+extern int  gpio_read(void);
+extern void cpld_modify(int mask, int set);
+#endif
+
+#define pcibios_assign_all_busses()	1
+
+#define PCIBIOS_MIN_IO		0x1000
+#define PCIBIOS_MIN_MEM 	0x81000000
+
+#endif