1 files changed, 0 insertions, 105 deletions
diff --git a/include/asm-arm/arch-ebsa285/hardware.h b/include/asm-arm/arch-ebsa285/hardware.h
deleted file mode 100644
index 74610c2c63d4..000000000000
--- a/include/asm-arm/arch-ebsa285/hardware.h
+++ /dev/null
@@ -1,105 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-ebsa285/hardware.h
- *
- *  Copyright (C) 1998-1999 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  This file contains the hardware definitions of the EBSA-285.
- */
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-#include <asm/arch/memory.h>
-
-/*   Virtual      Physical	Size
- * 0xff800000	0x40000000	1MB	X-Bus
- * 0xff000000	0x7c000000	1MB	PCI I/O space
- * 0xfe000000	0x42000000	1MB	CSR
- * 0xfd000000	0x78000000	1MB	Outbound write flush (not supported)
- * 0xfc000000	0x79000000	1MB	PCI IACK/special space
- * 0xfb000000	0x7a000000	16MB	PCI Config type 1
- * 0xfa000000	0x7b000000	16MB	PCI Config type 0
- * 0xf9000000	0x50000000	1MB	Cache flush
- * 0xf0000000	0x80000000	16MB	ISA memory
- */
-#define XBUS_SIZE		0x00100000
-#define XBUS_BASE		0xff800000
-
-#define PCIO_SIZE		0x00100000
-#define PCIO_BASE		0xff000000
-
-#define ARMCSR_SIZE		0x00100000
-#define ARMCSR_BASE		0xfe000000
-
-#define WFLUSH_SIZE		0x00100000
-#define WFLUSH_BASE		0xfd000000
-
-#define PCIIACK_SIZE		0x00100000
-#define PCIIACK_BASE		0xfc000000
-
-#define PCICFG1_SIZE		0x01000000
-#define PCICFG1_BASE		0xfb000000
-
-#define PCICFG0_SIZE		0x01000000
-#define PCICFG0_BASE		0xfa000000
-
-#define PCIMEM_SIZE		0x01000000
-#define PCIMEM_BASE		0xf0000000
-
-#define XBUS_LEDS		((volatile unsigned char *)(XBUS_BASE + 0x12000))
-#define XBUS_LED_AMBER		(1 << 0)
-#define XBUS_LED_GREEN		(1 << 1)
-#define XBUS_LED_RED		(1 << 2)
-#define XBUS_LED_TOGGLE		(1 << 8)
-
-#define XBUS_SWITCH		((volatile unsigned char *)(XBUS_BASE + 0x12000))
-#define XBUS_SWITCH_SWITCH	((*XBUS_SWITCH) & 15)
-#define XBUS_SWITCH_J17_13	((*XBUS_SWITCH) & (1 << 4))
-#define XBUS_SWITCH_J17_11	((*XBUS_SWITCH) & (1 << 5))
-#define XBUS_SWITCH_J17_9	((*XBUS_SWITCH) & (1 << 6))
-
-#define UNCACHEABLE_ADDR	(ARMCSR_BASE + 0x108)
-
-
-/* PIC irq control */
-#define PIC_LO			0x20
-#define PIC_MASK_LO		0x21
-#define PIC_HI			0xA0
-#define PIC_MASK_HI		0xA1
-
-/* GPIO pins */
-#define GPIO_CCLK		0x800
-#define GPIO_DSCLK		0x400
-#define GPIO_E2CLK		0x200
-#define GPIO_IOLOAD		0x100
-#define GPIO_RED_LED		0x080
-#define GPIO_WDTIMER		0x040
-#define GPIO_DATA		0x020
-#define GPIO_IOCLK		0x010
-#define GPIO_DONE		0x008
-#define GPIO_FAN		0x004
-#define GPIO_GREEN_LED		0x002
-#define GPIO_RESET		0x001
-
-/* CPLD pins */
-#define CPLD_DS_ENABLE		8
-#define CPLD_7111_DISABLE	4
-#define CPLD_UNMUTE		2
-#define CPLD_FLASH_WR_ENABLE	1
-
-#ifndef __ASSEMBLY__
-extern void gpio_modify_op(int mask, int set);
-extern void gpio_modify_io(int mask, int in);
-extern int  gpio_read(void);
-extern void cpld_modify(int mask, int set);
-#endif
-
-#define pcibios_assign_all_busses()	1
-
-#define PCIBIOS_MIN_IO		0x1000
-#define PCIBIOS_MIN_MEM 	0x81000000
-
-#endif