summaryrefslogtreecommitdiff
path: root/include/asm-arm/arch-omap/hardware.h
diff options
context:
space:
mode:
Diffstat (limited to 'include/asm-arm/arch-omap/hardware.h')
-rw-r--r--include/asm-arm/arch-omap/hardware.h324
1 files changed, 324 insertions, 0 deletions
diff --git a/include/asm-arm/arch-omap/hardware.h b/include/asm-arm/arch-omap/hardware.h
new file mode 100644
index 000000000000..37e06c782bdf
--- /dev/null
+++ b/include/asm-arm/arch-omap/hardware.h
@@ -0,0 +1,324 @@
+/*
+ * linux/include/asm-arm/arch-omap/hardware.h
+ *
+ * Hardware definitions for TI OMAP processors and boards
+ *
+ * NOTE: Please put device driver specific defines into a separate header
+ * file for each driver.
+ *
+ * Copyright (C) 2001 RidgeRun, Inc.
+ * Author: RidgeRun, Inc. Greg Lonnon <glonnon@ridgerun.com>
+ *
+ * Reorganized for Linux-2.6 by Tony Lindgren <tony@atomide.com>
+ * and Dirk Behme <dirk.behme@de.bosch.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __ASM_ARCH_OMAP_HARDWARE_H
+#define __ASM_ARCH_OMAP_HARDWARE_H
+
+#include <asm/sizes.h>
+#include <linux/config.h>
+#ifndef __ASSEMBLER__
+#include <asm/types.h>
+#include <asm/arch/cpu.h>
+#endif
+#include <asm/arch/io.h>
+
+/*
+ * ---------------------------------------------------------------------------
+ * Common definitions for all OMAP processors
+ * NOTE: Put all processor or board specific parts to the special header
+ * files.
+ * ---------------------------------------------------------------------------
+ */
+
+/*
+ * ----------------------------------------------------------------------------
+ * Clocks
+ * ----------------------------------------------------------------------------
+ */
+#define CLKGEN_REG_BASE (0xfffece00)
+#define ARM_CKCTL (CLKGEN_REG_BASE + 0x0)
+#define ARM_IDLECT1 (CLKGEN_REG_BASE + 0x4)
+#define ARM_IDLECT2 (CLKGEN_REG_BASE + 0x8)
+#define ARM_EWUPCT (CLKGEN_REG_BASE + 0xC)
+#define ARM_RSTCT1 (CLKGEN_REG_BASE + 0x10)
+#define ARM_RSTCT2 (CLKGEN_REG_BASE + 0x14)
+#define ARM_SYSST (CLKGEN_REG_BASE + 0x18)
+#define ARM_IDLECT3 (CLKGEN_REG_BASE + 0x24)
+
+#define CK_RATEF 1
+#define CK_IDLEF 2
+#define CK_ENABLEF 4
+#define CK_SELECTF 8
+#define SETARM_IDLE_SHIFT
+
+/* DPLL control registers */
+#define DPLL_CTL (0xfffecf00)
+
+/* DSP clock control */
+#define DSP_CONFIG_REG_BASE (0xe1008000)
+#define DSP_IDLECT1 (DSP_CONFIG_REG_BASE + 0x4)
+#define DSP_IDLECT2 (DSP_CONFIG_REG_BASE + 0x8)
+
+/*
+ * ---------------------------------------------------------------------------
+ * UPLD
+ * ---------------------------------------------------------------------------
+ */
+#define ULPD_REG_BASE (0xfffe0800)
+#define ULPD_IT_STATUS (ULPD_REG_BASE + 0x14)
+#define ULPD_CLOCK_CTRL (ULPD_REG_BASE + 0x30)
+# define DIS_USB_PVCI_CLK (1 << 5) /* no USB/FAC synch */
+# define USB_MCLK_EN (1 << 4) /* enable W4_USB_CLKO */
+#define ULPD_SOFT_REQ (ULPD_REG_BASE + 0x34)
+# define SOFT_UDC_REQ (1 << 4)
+# define SOFT_USB_CLK_REQ (1 << 3)
+# define SOFT_DPLL_REQ (1 << 0)
+#define ULPD_DPLL_CTRL (ULPD_REG_BASE + 0x3c)
+#define ULPD_STATUS_REQ (ULPD_REG_BASE + 0x40)
+#define ULPD_APLL_CTRL (ULPD_REG_BASE + 0x4c)
+#define ULPD_POWER_CTRL (ULPD_REG_BASE + 0x50)
+#define ULPD_SOFT_DISABLE_REQ_REG (ULPD_REG_BASE + 0x68)
+# define DIS_MMC2_DPLL_REQ (1 << 11)
+# define DIS_MMC1_DPLL_REQ (1 << 10)
+# define DIS_UART3_DPLL_REQ (1 << 9)
+# define DIS_UART2_DPLL_REQ (1 << 8)
+# define DIS_UART1_DPLL_REQ (1 << 7)
+# define DIS_USB_HOST_DPLL_REQ (1 << 6)
+#define ULPD_SDW_CLK_DIV_CTRL_SEL (ULPD_REG_BASE + 0x74)
+#define ULPD_CAM_CLK_CTRL (ULPD_REG_BASE + 0x7c)
+
+/*
+ * ---------------------------------------------------------------------------
+ * Watchdog timer
+ * ---------------------------------------------------------------------------
+ */
+
+/* Watchdog timer within the OMAP3.2 gigacell */
+#define OMAP_MPU_WATCHDOG_BASE (0xfffec800)
+#define OMAP_WDT_TIMER (OMAP_MPU_WATCHDOG_BASE + 0x0)
+#define OMAP_WDT_LOAD_TIM (OMAP_MPU_WATCHDOG_BASE + 0x4)
+#define OMAP_WDT_READ_TIM (OMAP_MPU_WATCHDOG_BASE + 0x4)
+#define OMAP_WDT_TIMER_MODE (OMAP_MPU_WATCHDOG_BASE + 0x8)
+
+/*
+ * ---------------------------------------------------------------------------
+ * Interrupts
+ * ---------------------------------------------------------------------------
+ */
+#define OMAP_IH1_BASE 0xfffecb00
+#define OMAP_IH2_BASE 0xfffe0000
+
+#define OMAP_IH1_ITR (OMAP_IH1_BASE + 0x00)
+#define OMAP_IH1_MIR (OMAP_IH1_BASE + 0x04)
+#define OMAP_IH1_SIR_IRQ (OMAP_IH1_BASE + 0x10)
+#define OMAP_IH1_SIR_FIQ (OMAP_IH1_BASE + 0x14)
+#define OMAP_IH1_CONTROL (OMAP_IH1_BASE + 0x18)
+#define OMAP_IH1_ILR0 (OMAP_IH1_BASE + 0x1c)
+#define OMAP_IH1_ISR (OMAP_IH1_BASE + 0x9c)
+
+#define OMAP_IH2_ITR (OMAP_IH2_BASE + 0x00)
+#define OMAP_IH2_MIR (OMAP_IH2_BASE + 0x04)
+#define OMAP_IH2_SIR_IRQ (OMAP_IH2_BASE + 0x10)
+#define OMAP_IH2_SIR_FIQ (OMAP_IH2_BASE + 0x14)
+#define OMAP_IH2_CONTROL (OMAP_IH2_BASE + 0x18)
+#define OMAP_IH2_ILR0 (OMAP_IH2_BASE + 0x1c)
+#define OMAP_IH2_ISR (OMAP_IH2_BASE + 0x9c)
+
+#define IRQ_ITR_REG_OFFSET 0x00
+#define IRQ_MIR_REG_OFFSET 0x04
+#define IRQ_SIR_IRQ_REG_OFFSET 0x10
+#define IRQ_SIR_FIQ_REG_OFFSET 0x14
+#define IRQ_CONTROL_REG_OFFSET 0x18
+#define IRQ_ISR_REG_OFFSET 0x9c
+#define IRQ_ILR0_REG_OFFSET 0x1c
+#define IRQ_GMR_REG_OFFSET 0xa0
+
+/*
+ * ----------------------------------------------------------------------------
+ * System control registers
+ * ----------------------------------------------------------------------------
+ */
+#define MOD_CONF_CTRL_0 0xfffe1080
+#define MOD_CONF_CTRL_1 0xfffe1110
+
+/*
+ * ----------------------------------------------------------------------------
+ * Pin multiplexing registers
+ * ----------------------------------------------------------------------------
+ */
+#define FUNC_MUX_CTRL_0 0xfffe1000
+#define FUNC_MUX_CTRL_1 0xfffe1004
+#define FUNC_MUX_CTRL_2 0xfffe1008
+#define COMP_MODE_CTRL_0 0xfffe100c
+#define FUNC_MUX_CTRL_3 0xfffe1010
+#define FUNC_MUX_CTRL_4 0xfffe1014
+#define FUNC_MUX_CTRL_5 0xfffe1018
+#define FUNC_MUX_CTRL_6 0xfffe101C
+#define FUNC_MUX_CTRL_7 0xfffe1020
+#define FUNC_MUX_CTRL_8 0xfffe1024
+#define FUNC_MUX_CTRL_9 0xfffe1028
+#define FUNC_MUX_CTRL_A 0xfffe102C
+#define FUNC_MUX_CTRL_B 0xfffe1030
+#define FUNC_MUX_CTRL_C 0xfffe1034
+#define FUNC_MUX_CTRL_D 0xfffe1038
+#define PULL_DWN_CTRL_0 0xfffe1040
+#define PULL_DWN_CTRL_1 0xfffe1044
+#define PULL_DWN_CTRL_2 0xfffe1048
+#define PULL_DWN_CTRL_3 0xfffe104c
+#define PULL_DWN_CTRL_4 0xfffe10ac
+
+/* OMAP-1610 specific multiplexing registers */
+#define FUNC_MUX_CTRL_E 0xfffe1090
+#define FUNC_MUX_CTRL_F 0xfffe1094
+#define FUNC_MUX_CTRL_10 0xfffe1098
+#define FUNC_MUX_CTRL_11 0xfffe109c
+#define FUNC_MUX_CTRL_12 0xfffe10a0
+#define PU_PD_SEL_0 0xfffe10b4
+#define PU_PD_SEL_1 0xfffe10b8
+#define PU_PD_SEL_2 0xfffe10bc
+#define PU_PD_SEL_3 0xfffe10c0
+#define PU_PD_SEL_4 0xfffe10c4
+
+/* Timer32K for 1610 and 1710*/
+#define OMAP_TIMER32K_BASE 0xFFFBC400
+
+/*
+ * ---------------------------------------------------------------------------
+ * TIPB bus interface
+ * ---------------------------------------------------------------------------
+ */
+#define TIPB_PUBLIC_CNTL_BASE 0xfffed300
+#define MPU_PUBLIC_TIPB_CNTL (TIPB_PUBLIC_CNTL_BASE + 0x8)
+#define TIPB_PRIVATE_CNTL_BASE 0xfffeca00
+#define MPU_PRIVATE_TIPB_CNTL (TIPB_PRIVATE_CNTL_BASE + 0x8)
+
+/*
+ * ----------------------------------------------------------------------------
+ * MPUI interface
+ * ----------------------------------------------------------------------------
+ */
+#define MPUI_BASE (0xfffec900)
+#define MPUI_CTRL (MPUI_BASE + 0x0)
+#define MPUI_DEBUG_ADDR (MPUI_BASE + 0x4)
+#define MPUI_DEBUG_DATA (MPUI_BASE + 0x8)
+#define MPUI_DEBUG_FLAG (MPUI_BASE + 0xc)
+#define MPUI_STATUS_REG (MPUI_BASE + 0x10)
+#define MPUI_DSP_STATUS (MPUI_BASE + 0x14)
+#define MPUI_DSP_BOOT_CONFIG (MPUI_BASE + 0x18)
+#define MPUI_DSP_API_CONFIG (MPUI_BASE + 0x1c)
+
+/*
+ * ----------------------------------------------------------------------------
+ * LED Pulse Generator
+ * ----------------------------------------------------------------------------
+ */
+#define OMAP_LPG1_BASE 0xfffbd000
+#define OMAP_LPG2_BASE 0xfffbd800
+#define OMAP_LPG1_LCR (OMAP_LPG1_BASE + 0x00)
+#define OMAP_LPG1_PMR (OMAP_LPG1_BASE + 0x04)
+#define OMAP_LPG2_LCR (OMAP_LPG2_BASE + 0x00)
+#define OMAP_LPG2_PMR (OMAP_LPG2_BASE + 0x04)
+
+#ifndef __ASSEMBLER__
+
+/*
+ * ---------------------------------------------------------------------------
+ * Serial ports
+ * ---------------------------------------------------------------------------
+ */
+#define OMAP_UART1_BASE (unsigned char *)0xfffb0000
+#define OMAP_UART2_BASE (unsigned char *)0xfffb0800
+#define OMAP_UART3_BASE (unsigned char *)0xfffb9800
+#define OMAP_MAX_NR_PORTS 3
+#define OMAP1510_BASE_BAUD (12000000/16)
+#define OMAP16XX_BASE_BAUD (48000000/16)
+
+#define is_omap_port(p) ({int __ret = 0; \
+ if (p == IO_ADDRESS(OMAP_UART1_BASE) || \
+ p == IO_ADDRESS(OMAP_UART2_BASE) || \
+ p == IO_ADDRESS(OMAP_UART3_BASE)) \
+ __ret = 1; \
+ __ret; \
+ })
+
+/*
+ * ---------------------------------------------------------------------------
+ * Processor specific defines
+ * ---------------------------------------------------------------------------
+ */
+#ifdef CONFIG_ARCH_OMAP730
+#include "omap730.h"
+#endif
+
+#ifdef CONFIG_ARCH_OMAP1510
+#include "omap1510.h"
+#endif
+
+#ifdef CONFIG_ARCH_OMAP16XX
+#include "omap16xx.h"
+#endif
+
+/*
+ * ---------------------------------------------------------------------------
+ * Board specific defines
+ * ---------------------------------------------------------------------------
+ */
+
+#ifdef CONFIG_MACH_OMAP_INNOVATOR
+#include "board-innovator.h"
+#endif
+
+#ifdef CONFIG_MACH_OMAP_H2
+#include "board-h2.h"
+#endif
+
+#ifdef CONFIG_MACH_OMAP_PERSEUS2
+#include "board-perseus2.h"
+#endif
+
+#ifdef CONFIG_MACH_OMAP_H3
+#include "board-h3.h"
+#endif
+
+#ifdef CONFIG_MACH_OMAP_H4
+#include "board-h4.h"
+#error "Support for H4 board not yet implemented."
+#endif
+
+#ifdef CONFIG_MACH_OMAP_OSK
+#include "board-osk.h"
+#endif
+
+#ifdef CONFIG_MACH_VOICEBLUE
+#include "board-voiceblue.h"
+#endif
+
+#ifdef CONFIG_MACH_NETSTAR
+#include "board-netstar.h"
+#endif
+
+#endif /* !__ASSEMBLER__ */
+
+#endif /* __ASM_ARCH_OMAP_HARDWARE_H */