diff options
Diffstat (limited to 'include/asm-arm/arch-sa1100/assabet.h')
| -rw-r--r-- | include/asm-arm/arch-sa1100/assabet.h | 105 |
1 files changed, 0 insertions, 105 deletions
diff --git a/include/asm-arm/arch-sa1100/assabet.h b/include/asm-arm/arch-sa1100/assabet.h deleted file mode 100644 index d6a1bb5b4944..000000000000 --- a/include/asm-arm/arch-sa1100/assabet.h +++ /dev/null @@ -1,105 +0,0 @@ -/* - * linux/include/asm-arm/arch-sa1100/assabet.h - * - * Created 2000/06/05 by Nicolas Pitre <nico@cam.org> - * - * This file contains the hardware specific definitions for Assabet - * Only include this file from SA1100-specific files. - * - * 2000/05/23 John Dorsey <john+@cs.cmu.edu> - * Definitions for Neponset added. - */ -#ifndef __ASM_ARCH_ASSABET_H -#define __ASM_ARCH_ASSABET_H - - -/* System Configuration Register flags */ - -#define ASSABET_SCR_SDRAM_LOW (1<<2) /* SDRAM size (low bit) */ -#define ASSABET_SCR_SDRAM_HIGH (1<<3) /* SDRAM size (high bit) */ -#define ASSABET_SCR_FLASH_LOW (1<<4) /* Flash size (low bit) */ -#define ASSABET_SCR_FLASH_HIGH (1<<5) /* Flash size (high bit) */ -#define ASSABET_SCR_GFX (1<<8) /* Graphics Accelerator (0 = present) */ -#define ASSABET_SCR_SA1111 (1<<9) /* Neponset (0 = present) */ - -#define ASSABET_SCR_INIT -1 - -extern unsigned long SCR_value; - -#ifdef CONFIG_ASSABET_NEPONSET -#define machine_has_neponset() ((SCR_value & ASSABET_SCR_SA1111) == 0) -#else -#define machine_has_neponset() (0) -#endif - -/* Board Control Register */ - -#define ASSABET_BCR_BASE 0xf1000000 -#define ASSABET_BCR (*(volatile unsigned int *)(ASSABET_BCR_BASE)) - -#define ASSABET_BCR_CF_PWR (1<<0) /* Compact Flash Power (1 = 3.3v, 0 = off) */ -#define ASSABET_BCR_CF_RST (1<<1) /* Compact Flash Reset (1 = power up reset) */ -#define ASSABET_BCR_GFX_RST (1<<1) /* Graphics Accelerator Reset (0 = hold reset) */ -#define ASSABET_BCR_CODEC_RST (1<<2) /* 0 = Holds UCB1300, ADI7171, and UDA1341 in reset */ -#define ASSABET_BCR_IRDA_FSEL (1<<3) /* IRDA Frequency select (0 = SIR, 1 = MIR/ FIR) */ -#define ASSABET_BCR_IRDA_MD0 (1<<4) /* Range/Power select */ -#define ASSABET_BCR_IRDA_MD1 (1<<5) /* Range/Power select */ -#define ASSABET_BCR_STEREO_LB (1<<6) /* Stereo Loopback */ -#define ASSABET_BCR_CF_BUS_OFF (1<<7) /* Compact Flash bus (0 = on, 1 = off (float)) */ -#define ASSABET_BCR_AUDIO_ON (1<<8) /* Audio power on */ -#define ASSABET_BCR_LIGHT_ON (1<<9) /* Backlight */ -#define ASSABET_BCR_LCD_12RGB (1<<10) /* 0 = 16RGB, 1 = 12RGB */ -#define ASSABET_BCR_LCD_ON (1<<11) /* LCD power on */ -#define ASSABET_BCR_RS232EN (1<<12) /* RS232 transceiver enable */ -#define ASSABET_BCR_LED_RED (1<<13) /* D9 (0 = on, 1 = off) */ -#define ASSABET_BCR_LED_GREEN (1<<14) /* D8 (0 = on, 1 = off) */ -#define ASSABET_BCR_VIB_ON (1<<15) /* Vibration motor (quiet alert) */ -#define ASSABET_BCR_COM_DTR (1<<16) /* COMport Data Terminal Ready */ -#define ASSABET_BCR_COM_RTS (1<<17) /* COMport Request To Send */ -#define ASSABET_BCR_RAD_WU (1<<18) /* Radio wake up interrupt */ -#define ASSABET_BCR_SMB_EN (1<<19) /* System management bus enable */ -#define ASSABET_BCR_TV_IR_DEC (1<<20) /* TV IR Decode Enable (not implemented) */ -#define ASSABET_BCR_QMUTE (1<<21) /* Quick Mute */ -#define ASSABET_BCR_RAD_ON (1<<22) /* Radio Power On */ -#define ASSABET_BCR_SPK_OFF (1<<23) /* 1 = Speaker amplifier power off */ - -#ifdef CONFIG_SA1100_ASSABET -extern void ASSABET_BCR_frob(unsigned int mask, unsigned int set); -#else -#define ASSABET_BCR_frob(x,y) do { } while (0) -#endif - -#define ASSABET_BCR_set(x) ASSABET_BCR_frob((x), (x)) -#define ASSABET_BCR_clear(x) ASSABET_BCR_frob((x), 0) - -#define ASSABET_BSR_BASE 0xf1000000 -#define ASSABET_BSR (*(volatile unsigned int*)(ASSABET_BSR_BASE)) - -#define ASSABET_BSR_RS232_VALID (1 << 24) -#define ASSABET_BSR_COM_DCD (1 << 25) -#define ASSABET_BSR_COM_CTS (1 << 26) -#define ASSABET_BSR_COM_DSR (1 << 27) -#define ASSABET_BSR_RAD_CTS (1 << 28) -#define ASSABET_BSR_RAD_DSR (1 << 29) -#define ASSABET_BSR_RAD_DCD (1 << 30) -#define ASSABET_BSR_RAD_RI (1 << 31) - - -/* GPIOs for which the generic definition doesn't say much */ -#define ASSABET_GPIO_RADIO_IRQ GPIO_GPIO (14) /* Radio interrupt request */ -#define ASSABET_GPIO_PS_MODE_SYNC GPIO_GPIO (16) /* Power supply mode/sync */ -#define ASSABET_GPIO_STEREO_64FS_CLK GPIO_GPIO (19) /* SSP UDA1341 clock input */ -#define ASSABET_GPIO_CF_IRQ GPIO_GPIO (21) /* CF IRQ */ -#define ASSABET_GPIO_CF_CD GPIO_GPIO (22) /* CF CD */ -#define ASSABET_GPIO_CF_BVD2 GPIO_GPIO (24) /* CF BVD */ -#define ASSABET_GPIO_GFX_IRQ GPIO_GPIO (24) /* Graphics IRQ */ -#define ASSABET_GPIO_CF_BVD1 GPIO_GPIO (25) /* CF BVD */ -#define ASSABET_GPIO_BATT_LOW GPIO_GPIO (26) /* Low battery */ -#define ASSABET_GPIO_RCLK GPIO_GPIO (26) /* CCLK/2 */ - -#define ASSABET_IRQ_GPIO_CF_IRQ IRQ_GPIO21 -#define ASSABET_IRQ_GPIO_CF_CD IRQ_GPIO22 -#define ASSABET_IRQ_GPIO_CF_BVD2 IRQ_GPIO24 -#define ASSABET_IRQ_GPIO_CF_BVD1 IRQ_GPIO25 - -#endif |