diff options
Diffstat (limited to 'include/asm-arm/hardware')
22 files changed, 2853 insertions, 0 deletions
diff --git a/include/asm-arm/hardware/amba.h b/include/asm-arm/hardware/amba.h new file mode 100644 index 000000000000..51e6e54b2aa1 --- /dev/null +++ b/include/asm-arm/hardware/amba.h @@ -0,0 +1,55 @@ +/* + * linux/include/asm-arm/hardware/amba.h + * + * Copyright (C) 2003 Deep Blue Solutions Ltd, All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef ASMARM_AMBA_H +#define ASMARM_AMBA_H + +#define AMBA_NR_IRQS 2 + +struct amba_device { + struct device dev; + struct resource res; + u64 dma_mask; + unsigned int periphid; + unsigned int irq[AMBA_NR_IRQS]; +}; + +struct amba_id { + unsigned int id; + unsigned int mask; + void *data; +}; + +struct amba_driver { + struct device_driver drv; + int (*probe)(struct amba_device *, void *); + int (*remove)(struct amba_device *); + void (*shutdown)(struct amba_device *); + int (*suspend)(struct amba_device *, pm_message_t); + int (*resume)(struct amba_device *); + struct amba_id *id_table; +}; + +#define amba_get_drvdata(d) dev_get_drvdata(&d->dev) +#define amba_set_drvdata(d,p) dev_set_drvdata(&d->dev, p) + +int amba_driver_register(struct amba_driver *); +void amba_driver_unregister(struct amba_driver *); +int amba_device_register(struct amba_device *, struct resource *); +void amba_device_unregister(struct amba_device *); +struct amba_device *amba_find_device(const char *, struct device *, unsigned int, unsigned int); +int amba_request_regions(struct amba_device *, const char *); +void amba_release_regions(struct amba_device *); + +#define amba_config(d) (((d)->periphid >> 24) & 0xff) +#define amba_rev(d) (((d)->periphid >> 20) & 0x0f) +#define amba_manf(d) (((d)->periphid >> 12) & 0xff) +#define amba_part(d) ((d)->periphid & 0xfff) + +#endif diff --git a/include/asm-arm/hardware/amba_clcd.h b/include/asm-arm/hardware/amba_clcd.h new file mode 100644 index 000000000000..2149be7c7023 --- /dev/null +++ b/include/asm-arm/hardware/amba_clcd.h @@ -0,0 +1,264 @@ +/* + * linux/include/asm-arm/hardware/amba_clcd.h -- Integrator LCD panel. + * + * David A Rusling + * + * Copyright (C) 2001 ARM Limited + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file COPYING in the main directory of this archive + * for more details. + */ +#include <linux/config.h> +#include <linux/fb.h> + +/* + * CLCD Controller Internal Register addresses + */ +#define CLCD_TIM0 0x00000000 +#define CLCD_TIM1 0x00000004 +#define CLCD_TIM2 0x00000008 +#define CLCD_TIM3 0x0000000c +#define CLCD_UBAS 0x00000010 +#define CLCD_LBAS 0x00000014 + +#ifndef CONFIG_ARCH_VERSATILE +#define CLCD_IENB 0x00000018 +#define CLCD_CNTL 0x0000001c +#else +/* + * Someone rearranged these two registers on the Versatile + * platform... + */ +#define CLCD_IENB 0x0000001c +#define CLCD_CNTL 0x00000018 +#endif + +#define CLCD_STAT 0x00000020 +#define CLCD_INTR 0x00000024 +#define CLCD_UCUR 0x00000028 +#define CLCD_LCUR 0x0000002C +#define CLCD_PALL 0x00000200 +#define CLCD_PALETTE 0x00000200 + +#define TIM2_CLKSEL (1 << 5) +#define TIM2_IVS (1 << 11) +#define TIM2_IHS (1 << 12) +#define TIM2_IPC (1 << 13) +#define TIM2_IOE (1 << 14) +#define TIM2_BCD (1 << 26) + +#define CNTL_LCDEN (1 << 0) +#define CNTL_LCDBPP1 (0 << 1) +#define CNTL_LCDBPP2 (1 << 1) +#define CNTL_LCDBPP4 (2 << 1) +#define CNTL_LCDBPP8 (3 << 1) +#define CNTL_LCDBPP16 (4 << 1) +#define CNTL_LCDBPP24 (5 << 1) +#define CNTL_LCDBW (1 << 4) +#define CNTL_LCDTFT (1 << 5) +#define CNTL_LCDMONO8 (1 << 6) +#define CNTL_LCDDUAL (1 << 7) +#define CNTL_BGR (1 << 8) +#define CNTL_BEBO (1 << 9) +#define CNTL_BEPO (1 << 10) +#define CNTL_LCDPWR (1 << 11) +#define CNTL_LCDVCOMP(x) ((x) << 12) +#define CNTL_LDMAFIFOTIME (1 << 15) +#define CNTL_WATERMARK (1 << 16) + +struct clcd_panel { + struct fb_videomode mode; + signed short width; /* width in mm */ + signed short height; /* height in mm */ + u32 tim2; + u32 tim3; + u32 cntl; + unsigned int bpp:8, + fixedtimings:1, + grayscale:1; + unsigned int connector; +}; + +struct clcd_regs { + u32 tim0; + u32 tim1; + u32 tim2; + u32 tim3; + u32 cntl; + unsigned long pixclock; +}; + +struct clcd_fb; + +/* + * the board-type specific routines + */ +struct clcd_board { + const char *name; + + /* + * Optional. Check whether the var structure is acceptable + * for this display. + */ + int (*check)(struct clcd_fb *fb, struct fb_var_screeninfo *var); + + /* + * Compulsary. Decode fb->fb.var into regs->*. In the case of + * fixed timing, set regs->* to the register values required. + */ + void (*decode)(struct clcd_fb *fb, struct clcd_regs *regs); + + /* + * Optional. Disable any extra display hardware. + */ + void (*disable)(struct clcd_fb *); + + /* + * Optional. Enable any extra display hardware. + */ + void (*enable)(struct clcd_fb *); + + /* + * Setup platform specific parts of CLCD driver + */ + int (*setup)(struct clcd_fb *); + + /* + * mmap the framebuffer memory + */ + int (*mmap)(struct clcd_fb *, struct vm_area_struct *); + + /* + * Remove platform specific parts of CLCD driver + */ + void (*remove)(struct clcd_fb *); +}; + +struct amba_device; +struct clk; + +/* this data structure describes each frame buffer device we find */ +struct clcd_fb { + struct fb_info fb; + struct amba_device *dev; + struct clk *clk; + struct clcd_panel *panel; + struct clcd_board *board; + void *board_data; + void __iomem *regs; + u32 clcd_cntl; + u32 cmap[16]; +}; + +static inline void clcdfb_decode(struct clcd_fb *fb, struct clcd_regs *regs) +{ + u32 val; + + /* + * Program the CLCD controller registers and start the CLCD + */ + val = ((fb->fb.var.xres / 16) - 1) << 2; + val |= (fb->fb.var.hsync_len - 1) << 8; + val |= (fb->fb.var.right_margin - 1) << 16; + val |= (fb->fb.var.left_margin - 1) << 24; + regs->tim0 = val; + + val = fb->fb.var.yres - 1; + val |= (fb->fb.var.vsync_len - 1) << 10; + val |= fb->fb.var.lower_margin << 16; + val |= fb->fb.var.upper_margin << 24; + regs->tim1 = val; + + val = fb->panel->tim2; + val |= fb->fb.var.sync & FB_SYNC_HOR_HIGH_ACT ? 0 : TIM2_IHS; + val |= fb->fb.var.sync & FB_SYNC_VERT_HIGH_ACT ? 0 : TIM2_IVS; + + if (fb->panel->cntl & CNTL_LCDTFT) + val |= (fb->fb.var.xres_virtual - 1) << 16; + else if (fb->panel->cntl & CNTL_LCDBW) + printk("what value for CPL for stnmono panels?"); + else + val |= ((fb->fb.var.xres_virtual * 8 / 3) - 1) << 16; + regs->tim2 = val; + + regs->tim3 = fb->panel->tim3; + + val = fb->panel->cntl; + if (fb->fb.var.grayscale) + val |= CNTL_LCDBW; + + switch (fb->fb.var.bits_per_pixel) { + case 1: + val |= CNTL_LCDBPP1; + break; + case 2: + val |= CNTL_LCDBPP2; + break; + case 4: + val |= CNTL_LCDBPP4; + break; + case 8: + val |= CNTL_LCDBPP8; + break; + case 16: + val |= CNTL_LCDBPP16; + break; + case 24: + val |= CNTL_LCDBPP24; + break; + } + + regs->cntl = val; + regs->pixclock = fb->fb.var.pixclock; +} + +static inline int clcdfb_check(struct clcd_fb *fb, struct fb_var_screeninfo *var) +{ + var->xres_virtual = var->xres = (var->xres + 7) & ~7; + var->yres_virtual = var->yres; + +#define CHECK(e,l,h) (var->e < l || var->e > h) + if (CHECK(right_margin, (5+1), 256) || /* back porch */ + CHECK(left_margin, (5+1), 256) || /* front porch */ + CHECK(hsync_len, (5+1), 256) || + var->xres > 4096 || + var->lower_margin > 255 || /* back porch */ + var->upper_margin > 255 || /* front porch */ + var->vsync_len > 32 || + var->yres > 1024) + return -EINVAL; +#undef CHECK + + /* single panel mode: PCD = max(PCD, 1) */ + /* dual panel mode: PCD = max(PCD, 5) */ + + /* + * You can't change the grayscale setting, and + * we can only do non-interlaced video. + */ + if (var->grayscale != fb->fb.var.grayscale || + (var->vmode & FB_VMODE_MASK) != FB_VMODE_NONINTERLACED) + return -EINVAL; + +#define CHECK(e) (var->e != fb->fb.var.e) + if (fb->panel->fixedtimings && + (CHECK(xres) || + CHECK(yres) || + CHECK(bits_per_pixel) || + CHECK(pixclock) || + CHECK(left_margin) || + CHECK(right_margin) || + CHECK(upper_margin) || + CHECK(lower_margin) || + CHECK(hsync_len) || + CHECK(vsync_len) || + CHECK(sync))) + return -EINVAL; +#undef CHECK + + var->nonstd = 0; + var->accel_flags = 0; + + return 0; +} diff --git a/include/asm-arm/hardware/amba_kmi.h b/include/asm-arm/hardware/amba_kmi.h new file mode 100644 index 000000000000..a39e5be751b3 --- /dev/null +++ b/include/asm-arm/hardware/amba_kmi.h @@ -0,0 +1,92 @@ +/* + * linux/include/asm-arm/hardware/amba_kmi.h + * + * Internal header file for AMBA KMI ports + * + * Copyright (C) 2000 Deep Blue Solutions Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * + * --------------------------------------------------------------------------- + * From ARM PrimeCell(tm) PS2 Keyboard/Mouse Interface (PL050) Technical + * Reference Manual - ARM DDI 0143B - see http://www.arm.com/ + * --------------------------------------------------------------------------- + */ +#ifndef ASM_ARM_HARDWARE_AMBA_KMI_H +#define ASM_ARM_HARDWARE_AMBA_KMI_H + +/* + * KMI control register: + * KMICR_TYPE 0 = PS2/AT mode, 1 = No line control bit mode + * KMICR_RXINTREN 1 = enable RX interrupts + * KMICR_TXINTREN 1 = enable TX interrupts + * KMICR_EN 1 = enable KMI + * KMICR_FD 1 = force KMI data low + * KMICR_FC 1 = force KMI clock low + */ +#define KMICR (KMI_BASE + 0x00) +#define KMICR_TYPE (1 << 5) +#define KMICR_RXINTREN (1 << 4) +#define KMICR_TXINTREN (1 << 3) +#define KMICR_EN (1 << 2) +#define KMICR_FD (1 << 1) +#define KMICR_FC (1 << 0) + +/* + * KMI status register: + * KMISTAT_TXEMPTY 1 = transmitter register empty + * KMISTAT_TXBUSY 1 = currently sending data + * KMISTAT_RXFULL 1 = receiver register ready to be read + * KMISTAT_RXBUSY 1 = currently receiving data + * KMISTAT_RXPARITY parity of last databyte received + * KMISTAT_IC current level of KMI clock input + * KMISTAT_ID current level of KMI data input + */ +#define KMISTAT (KMI_BASE + 0x04) +#define KMISTAT_TXEMPTY (1 << 6) +#define KMISTAT_TXBUSY (1 << 5) +#define KMISTAT_RXFULL (1 << 4) +#define KMISTAT_RXBUSY (1 << 3) +#define KMISTAT_RXPARITY (1 << 2) +#define KMISTAT_IC (1 << 1) +#define KMISTAT_ID (1 << 0) + +/* + * KMI data register + */ +#define KMIDATA (KMI_BASE + 0x08) + +/* + * KMI clock divisor: to generate 8MHz internal clock + * div = (ref / 8MHz) - 1; 0 <= div <= 15 + */ +#define KMICLKDIV (KMI_BASE + 0x0c) + +/* + * KMI interrupt register: + * KMIIR_TXINTR 1 = transmit interrupt asserted + * KMIIR_RXINTR 1 = receive interrupt asserted + */ +#define KMIIR (KMI_BASE + 0x10) +#define KMIIR_TXINTR (1 << 1) +#define KMIIR_RXINTR (1 << 0) + +/* + * The size of the KMI primecell + */ +#define KMI_SIZE (0x100) + +#endif diff --git a/include/asm-arm/hardware/amba_serial.h b/include/asm-arm/hardware/amba_serial.h new file mode 100644 index 000000000000..71770aa6389f --- /dev/null +++ b/include/asm-arm/hardware/amba_serial.h @@ -0,0 +1,156 @@ +/* + * linux/include/asm-arm/hardware/serial_amba.h + * + * Internal header file for AMBA serial ports + * + * Copyright (C) ARM Limited + * Copyright (C) 2000 Deep Blue Solutions Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef ASM_ARM_HARDWARE_SERIAL_AMBA_H +#define ASM_ARM_HARDWARE_SERIAL_AMBA_H + +/* ------------------------------------------------------------------------------- + * From AMBA UART (PL010) Block Specification + * ------------------------------------------------------------------------------- + * UART Register Offsets. + */ +#define UART01x_DR 0x00 /* Data read or written from the interface. */ +#define UART01x_RSR 0x04 /* Receive status register (Read). */ +#define UART01x_ECR 0x04 /* Error clear register (Write). */ +#define UART010_LCRH 0x08 /* Line control register, high byte. */ +#define UART010_LCRM 0x0C /* Line control register, middle byte. */ +#define UART010_LCRL 0x10 /* Line control register, low byte. */ +#define UART010_CR 0x14 /* Control register. */ +#define UART01x_FR 0x18 /* Flag register (Read only). */ +#define UART010_IIR 0x1C /* Interrupt indentification register (Read). */ +#define UART010_ICR 0x1C /* Interrupt clear register (Write). */ +#define UART01x_ILPR 0x20 /* IrDA low power counter register. */ +#define UART011_IBRD 0x24 /* Integer baud rate divisor register. */ +#define UART011_FBRD 0x28 /* Fractional baud rate divisor register. */ +#define UART011_LCRH 0x2c /* Line control register. */ +#define UART011_CR 0x30 /* Control register. */ +#define UART011_IFLS 0x34 /* Interrupt fifo level select. */ +#define UART011_IMSC 0x38 /* Interrupt mask. */ +#define UART011_RIS 0x3c /* Raw interrupt status. */ +#define UART011_MIS 0x40 /* Masked interrupt status. */ +#define UART011_ICR 0x44 /* Interrupt clear register. */ +#define UART011_DMACR 0x48 /* DMA control register. */ + +#define UART01x_RSR_OE 0x08 +#define UART01x_RSR_BE 0x04 +#define UART01x_RSR_PE 0x02 +#define UART01x_RSR_FE 0x01 + +#define UART011_FR_RI 0x100 +#define UART011_FR_TXFE 0x080 +#define UART011_FR_RXFF 0x040 +#define UART01x_FR_TXFF 0x020 +#define UART01x_FR_RXFE 0x010 +#define UART01x_FR_BUSY 0x008 +#define UART01x_FR_DCD 0x004 +#define UART01x_FR_DSR 0x002 +#define UART01x_FR_CTS 0x001 +#define UART01x_FR_TMSK (UART01x_FR_TXFF + UART01x_FR_BUSY) + +#define UART011_CR_CTSEN 0x8000 /* CTS hardware flow control */ +#define UART011_CR_RTSEN 0x4000 /* RTS hardware flow control */ +#define UART011_CR_OUT2 0x2000 /* OUT2 */ +#define UART011_CR_OUT1 0x1000 /* OUT1 */ +#define UART011_CR_RTS 0x0800 /* RTS */ +#define UART011_CR_DTR 0x0400 /* DTR */ +#define UART011_CR_RXE 0x0200 /* receive enable */ +#define UART011_CR_TXE 0x0100 /* transmit enable */ +#define UART011_CR_LBE 0x0080 /* loopback enable */ +#define UART010_CR_RTIE 0x0040 +#define UART010_CR_TIE 0x0020 +#define UART010_CR_RIE 0x0010 +#define UART010_CR_MSIE 0x0008 +#define UART01x_CR_IIRLP 0x0004 /* SIR low power mode */ +#define UART01x_CR_SIREN 0x0002 /* SIR enable */ +#define UART01x_CR_UARTEN 0x0001 /* UART enable */ + +#define UART011_LCRH_SPS 0x80 +#define UART01x_LCRH_WLEN_8 0x60 +#define UART01x_LCRH_WLEN_7 0x40 +#define UART01x_LCRH_WLEN_6 0x20 +#define UART01x_LCRH_WLEN_5 0x00 +#define UART01x_LCRH_FEN 0x10 +#define UART01x_LCRH_STP2 0x08 +#define UART01x_LCRH_EPS 0x04 +#define UART01x_LCRH_PEN 0x02 +#define UART01x_LCRH_BRK 0x01 + +#define UART010_IIR_RTIS 0x08 +#define UART010_IIR_TIS 0x04 +#define UART010_IIR_RIS 0x02 +#define UART010_IIR_MIS 0x01 + +#define UART011_IFLS_RX1_8 (0 << 3) +#define UART011_IFLS_RX2_8 (1 << 3) +#define UART011_IFLS_RX4_8 (2 << 3) +#define UART011_IFLS_RX6_8 (3 << 3) +#define UART011_IFLS_RX7_8 (4 << 3) +#define UART011_IFLS_TX1_8 (0 << 0) +#define UART011_IFLS_TX2_8 (1 << 0) +#define UART011_IFLS_TX4_8 (2 << 0) +#define UART011_IFLS_TX6_8 (3 << 0) +#define UART011_IFLS_TX7_8 (4 << 0) + +#define UART011_OEIM (1 << 10) /* overrun error interrupt mask */ +#define UART011_BEIM (1 << 9) /* break error interrupt mask */ +#define UART011_PEIM (1 << 8) /* parity error interrupt mask */ +#define UART011_FEIM (1 << 7) /* framing error interrupt mask */ +#define UART011_RTIM (1 << 6) /* receive timeout interrupt mask */ +#define UART011_TXIM (1 << 5) /* transmit interrupt mask */ +#define UART011_RXIM (1 << 4) /* receive interrupt mask */ +#define UART011_DSRMIM (1 << 3) /* DSR interrupt mask */ +#define UART011_DCDMIM (1 << 2) /* DCD interrupt mask */ +#define UART011_CTSMIM (1 << 1) /* CTS interrupt mask */ +#define UART011_RIMIM (1 << 0) /* RI interrupt mask */ + +#define UART011_OEIS (1 << 10) /* overrun error interrupt status */ +#define UART011_BEIS (1 << 9) /* break error interrupt status */ +#define UART011_PEIS (1 << 8) /* parity error interrupt status */ +#define UART011_FEIS (1 << 7) /* framing error interrupt status */ +#define UART011_RTIS (1 << 6) /* receive timeout interrupt status */ +#define UART011_TXIS (1 << 5) /* transmit interrupt status */ +#define UART011_RXIS (1 << 4) /* receive interrupt status */ +#define UART011_DSRMIS (1 << 3) /* DSR interrupt status */ +#define UART011_DCDMIS (1 << 2) /* DCD interrupt status */ +#define UART011_CTSMIS (1 << 1) /* CTS interrupt status */ +#define UART011_RIMIS (1 << 0) /* RI interrupt status */ + +#define UART011_OEIC (1 << 10) /* overrun error interrupt clear */ +#define UART011_BEIC (1 << 9) /* break error interrupt clear */ +#define UART011_PEIC (1 << 8) /* parity error interrupt clear */ +#define UART011_FEIC (1 << 7) /* framing error interrupt clear */ +#define UART011_RTIC (1 << 6) /* receive timeout interrupt clear */ +#define UART011_TXIC (1 << 5) /* transmit interrupt clear */ +#define UART011_RXIC (1 << 4) /* receive interrupt clear */ +#define UART011_DSRMIC (1 << 3) /* DSR interrupt clear */ +#define UART011_DCDMIC (1 << 2) /* DCD interrupt clear */ +#define UART011_CTSMIC (1 << 1) /* CTS interrupt clear */ +#define UART011_RIMIC (1 << 0) /* RI interrupt clear */ + +#define UART011_DMAONERR (1 << 2) /* disable dma on error */ +#define UART011_TXDMAE (1 << 1) /* enable transmit dma */ +#define UART011_RXDMAE (1 << 0) /* enable receive dma */ + +#define UART01x_RSR_ANY (UART01x_RSR_OE|UART01x_RSR_BE|UART01x_RSR_PE|UART01x_RSR_FE) +#define UART01x_FR_MODEM_ANY (UART01x_FR_DCD|UART01x_FR_DSR|UART01x_FR_CTS) + +#endif diff --git a/include/asm-arm/hardware/clock.h b/include/asm-arm/hardware/clock.h new file mode 100644 index 000000000000..4983449ff2c7 --- /dev/null +++ b/include/asm-arm/hardware/clock.h @@ -0,0 +1,121 @@ +/* + * linux/include/asm-arm/hardware/clock.h + * + * Copyright (C) 2004 ARM Limited. + * Written by Deep Blue Solutions Limited. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef ASMARM_CLOCK_H +#define ASMARM_CLOCK_H + +struct device; + +/* + * The base API. + */ + + +/* + * struct clk - an machine class defined object / cookie. + */ +struct clk; + +/** + * clk_get - lookup and obtain a reference to a clock producer. + * @dev: device for clock "consumer" + * @id: device ID + * + * Returns a struct clk corresponding to the clock producer, or + * valid IS_ERR() condition containing errno. + */ +struct clk *clk_get(struct device *dev, const char *id); + +/** + * clk_enable - inform the system when the clock source should be running. + * @clk: clock source + * + * If the clock can not be enabled/disabled, this should return success. + * + * Returns success (0) or negative errno. + */ +int clk_enable(struct clk *clk); + +/** + * clk_disable - inform the system when the clock source is no longer required. + * @clk: clock source + */ +void clk_disable(struct clk *clk); + +/** + * clk_use - increment the use count + * @clk: clock source + * + * Returns success (0) or negative errno. + */ +int clk_use(struct clk *clk); + +/** + * clk_unuse - decrement the use count + * @clk: clock source + */ +void clk_unuse(struct clk *clk); + +/** + * clk_get_rate - obtain the current clock rate (in Hz) for a clock source. + * This is only valid once the clock source has been enabled. + * @clk: clock source + */ +unsigned long clk_get_rate(struct clk *clk); + +/** + * clk_put - "free" the clock source + * @clk: clock source + */ +void clk_put(struct clk *clk); + + +/* + * The remaining APIs are optional for machine class support. + */ + + +/** + * clk_round_rate - adjust a rate to the exact rate a clock can provide + * @clk: clock source + * @rate: desired clock rate in Hz + * + * Returns rounded clock rate in Hz, or negative errno. + */ +long clk_round_rate(struct clk *clk, unsigned long rate); + +/** + * clk_set_rate - set the clock rate for a clock source + * @clk: clock source + * @rate: desired clock rate in Hz + * + * Returns success (0) or negative errno. + */ +int clk_set_rate(struct clk *clk, unsigned long rate); + +/** + * clk_set_parent - set the parent clock source for this clock + * @clk: clock source + * @parent: parent clock source + * + * Returns success (0) or negative errno. + */ +int clk_set_parent(struct clk *clk, struct clk *parent); + +/** + * clk_get_parent - get the parent clock source for this clock + * @clk: clock source + * + * Returns struct clk corresponding to parent clock source, or + * valid IS_ERR() condition containing errno. + */ +struct clk *clk_get_parent(struct clk *clk); + +#endif diff --git a/include/asm-arm/hardware/clps7111.h b/include/asm-arm/hardware/clps7111.h new file mode 100644 index 000000000000..8d3228dc1778 --- /dev/null +++ b/include/asm-arm/hardware/clps7111.h @@ -0,0 +1,184 @@ +/* + * linux/include/asm-arm/hardware/clps7111.h + * + * This file contains the hardware definitions of the CLPS7111 internal + * registers. + * + * Copyright (C) 2000 Deep Blue Solutions Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef __ASM_HARDWARE_CLPS7111_H +#define __ASM_HARDWARE_CLPS7111_H + +#define CLPS7111_PHYS_BASE (0x80000000) + +#ifndef __ASSEMBLY__ +#define clps_readb(off) __raw_readb(CLPS7111_BASE + (off)) +#define clps_readw(off) __raw_readw(CLPS7111_BASE + (off)) +#define clps_readl(off) __raw_readl(CLPS7111_BASE + (off)) +#define clps_writeb(val,off) __raw_writeb(val, CLPS7111_BASE + (off)) +#define clps_writew(val,off) __raw_writew(val, CLPS7111_BASE + (off)) +#define clps_writel(val,off) __raw_writel(val, CLPS7111_BASE + (off)) +#endif + +#define PADR (0x0000) +#define PBDR (0x0001) +#define PDDR (0x0003) +#define PADDR (0x0040) +#define PBDDR (0x0041) +#define PDDDR (0x0043) +#define PEDR (0x0080) +#define PEDDR (0x00c0) +#define SYSCON1 (0x0100) +#define SYSFLG1 (0x0140) +#define MEMCFG1 (0x0180) +#define MEMCFG2 (0x01c0) +#define DRFPR (0x0200) +#define INTSR1 (0x0240) +#define INTMR1 (0x0280) +#define LCDCON (0x02c0) +#define TC1D (0x0300) +#define TC2D (0x0340) +#define RTCDR (0x0380) +#define RTCMR (0x03c0) +#define PMPCON (0x0400) +#define CODR (0x0440) +#define UARTDR1 (0x0480) +#define UBRLCR1 (0x04c0) +#define SYNCIO (0x0500) +#define PALLSW (0x0540) +#define PALMSW (0x0580) +#define STFCLR (0x05c0) +#define BLEOI (0x0600) +#define MCEOI (0x0640) +#define TEOI (0x0680) +#define TC1EOI (0x06c0) +#define TC2EOI (0x0700) +#define RTCEOI (0x0740) +#define UMSEOI (0x0780) +#define COEOI (0x07c0) +#define HALT (0x0800) +#define STDBY (0x0840) + +#define FBADDR (0x1000) +#define SYSCON2 (0x1100) +#define SYSFLG2 (0x1140) +#define INTSR2 (0x1240) +#define INTMR2 (0x1280) +#define UARTDR2 (0x1480) +#define UBRLCR2 (0x14c0) +#define SS2DR (0x1500) +#define SRXEOF (0x1600) +#define SS2POP (0x16c0) +#define KBDEOI (0x1700) + +/* common bits: SYSCON1 / SYSCON2 */ +#define SYSCON_UARTEN (1 << 8) + +#define SYSCON1_KBDSCAN(x) ((x) & 15) +#define SYSCON1_KBDSCANMASK (15) +#define SYSCON1_TC1M (1 << 4) +#define SYSCON1_TC1S (1 << 5) +#define SYSCON1_TC2M (1 << 6) +#define SYSCON1_TC2S (1 << 7) +#define SYSCON1_UART1EN SYSCON_UARTEN +#define SYSCON1_BZTOG (1 << 9) +#define SYSCON1_BZMOD (1 << 10) +#define SYSCON1_DBGEN (1 << 11) +#define SYSCON1_LCDEN (1 << 12) +#define SYSCON1_CDENTX (1 << 13) +#define SYSCON1_CDENRX (1 << 14) +#define SYSCON1_SIREN (1 << 15) +#define SYSCON1_ADCKSEL(x) (((x) & 3) << 16) +#define SYSCON1_ADCKSEL_MASK (3 << 16) +#define SYSCON1_EXCKEN (1 << 18) +#define SYSCON1_WAKEDIS (1 << 19) +#define SYSCON1_IRTXM (1 << 20) + +/* common bits: SYSFLG1 / SYSFLG2 */ +#define SYSFLG_UBUSY (1 << 11) +#define SYSFLG_URXFE (1 << 22) +#define SYSFLG_UTXFF (1 << 23) + +#define SYSFLG1_MCDR (1 << 0) +#define SYSFLG1_DCDET (1 << 1) +#define SYSFLG1_WUDR (1 << 2) +#define SYSFLG1_WUON (1 << 3) +#define SYSFLG1_CTS (1 << 8) +#define SYSFLG1_DSR (1 << 9) +#define SYSFLG1_DCD (1 << 10) +#define SYSFLG1_UBUSY SYSFLG_UBUSY +#define SYSFLG1_NBFLG (1 << 12) +#define SYSFLG1_RSTFLG (1 << 13) +#define SYSFLG1_PFFLG (1 << 14) +#define SYSFLG1_CLDFLG (1 << 15) +#define SYSFLG1_URXFE SYSFLG_URXFE +#define SYSFLG1_UTXFF SYSFLG_UTXFF +#define SYSFLG1_CRXFE (1 << 24) +#define SYSFLG1_CTXFF (1 << 25) +#define SYSFLG1_SSIBUSY (1 << 26) +#define SYSFLG1_ID (1 << 29) + +#define SYSFLG2_SSRXOF (1 << 0) +#define SYSFLG2_RESVAL (1 << 1) +#define SYSFLG2_RESFRM (1 << 2) +#define SYSFLG2_SS2RXFE (1 << 3) +#define SYSFLG2_SS2TXFF (1 << 4) +#define SYSFLG2_SS2TXUF (1 << 5) +#define SYSFLG2_CKMODE (1 << 6) +#define SYSFLG2_UBUSY SYSFLG_UBUSY +#define SYSFLG2_URXFE SYSFLG_URXFE +#define SYSFLG2_UTXFF SYSFLG_UTXFF + +#define LCDCON_GSEN (1 << 30) +#define LCDCON_GSMD (1 << 31) + +#define SYSCON2_SERSEL (1 << 0) +#define SYSCON2_KBD6 (1 << 1) +#define SYSCON2_DRAMZ (1 << 2) +#define SYSCON2_KBWEN (1 << 3) +#define SYSCON2_SS2TXEN (1 << 4) +#define SYSCON2_PCCARD1 (1 << 5) +#define SYSCON2_PCCARD2 (1 << 6) +#define SYSCON2_SS2RXEN (1 << 7) +#define SYSCON2_UART2EN SYSCON_UARTEN +#define SYSCON2_SS2MAEN (1 << 9) +#define SYSCON2_OSTB (1 << 12) +#define SYSCON2_CLKENSL (1 << 13) +#define SYSCON2_BUZFREQ (1 << 14) + +/* common bits: UARTDR1 / UARTDR2 */ +#define UARTDR_FRMERR (1 << 8) +#define UARTDR_PARERR (1 << 9) +#define UARTDR_OVERR (1 << 10) + +/* common bits: UBRLCR1 / UBRLCR2 */ +#define UBRLCR_BAUD_MASK ((1 << 12) - 1) +#define UBRLCR_BREAK (1 << 12) +#define UBRLCR_PRTEN (1 << 13) +#define UBRLCR_EVENPRT (1 << 14) +#define UBRLCR_XSTOP (1 << 15) +#define UBRLCR_FIFOEN (1 << 16) +#define UBRLCR_WRDLEN5 (0 << 17) +#define UBRLCR_WRDLEN6 (1 << 17) +#define UBRLCR_WRDLEN7 (2 << 17) +#define UBRLCR_WRDLEN8 (3 << 17) +#define UBRLCR_WRDLEN_MASK (3 << 17) + +#define SYNCIO_SMCKEN (1 << 13) +#define SYNCIO_TXFRMEN (1 << 14) + +#endif /* __ASM_HARDWARE_CLPS7111_H */ diff --git a/include/asm-arm/hardware/cs89712.h b/include/asm-arm/hardware/cs89712.h new file mode 100644 index 000000000000..ad99a3e1b802 --- /dev/null +++ b/include/asm-arm/hardware/cs89712.h @@ -0,0 +1,49 @@ +/* + * linux/include/asm-arm/hardware/cs89712.h + * + * This file contains the hardware definitions of the CS89712 + * additional internal registers. + * + * Copyright (C) 2001 Thomas Gleixner autronix automation <gleixner@autronix.de> + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef __ASM_HARDWARE_CS89712_H +#define __ASM_HARDWARE_CS89712_H + +/* +* CS89712 additional registers +*/ + +#define PCDR 0x0002 /* Port C Data register ---------------------------- */ +#define PCDDR 0x0042 /* Port C Data Direction register ------------------ */ +#define SDCONF 0x2300 /* SDRAM Configuration register ---------------------*/ +#define SDRFPR 0x2340 /* SDRAM Refresh period register --------------------*/ + +#define SDCONF_ACTIVE (1 << 10) +#define SDCONF_CLKCTL (1 << 9) +#define SDCONF_WIDTH_4 (0 << 7) +#define SDCONF_WIDTH_8 (1 << 7) +#define SDCONF_WIDTH_16 (2 << 7) +#define SDCONF_WIDTH_32 (3 << 7) +#define SDCONF_SIZE_16 (0 << 5) +#define SDCONF_SIZE_64 (1 << 5) +#define SDCONF_SIZE_128 (2 << 5) +#define SDCONF_SIZE_256 (3 << 5) +#define SDCONF_CASLAT_2 (2) +#define SDCONF_CASLAT_3 (3) + +#endif /* __ASM_HARDWARE_CS89712_H */ diff --git a/include/asm-arm/hardware/dec21285.h b/include/asm-arm/hardware/dec21285.h new file mode 100644 index 000000000000..9049f0ddaecf --- /dev/null +++ b/include/asm-arm/hardware/dec21285.h @@ -0,0 +1,148 @@ +/* + * linux/include/asm-arm/hardware/dec21285.h + * + * Copyright (C) 1998 Russell King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * DC21285 registers + */ +#define DC21285_PCI_IACK 0x79000000 +#define DC21285_ARMCSR_BASE 0x42000000 +#define DC21285_PCI_TYPE_0_CONFIG 0x7b000000 +#define DC21285_PCI_TYPE_1_CONFIG 0x7a000000 +#define DC21285_OUTBOUND_WRITE_FLUSH 0x78000000 +#define DC21285_FLASH 0x41000000 +#define DC21285_PCI_IO 0x7c000000 +#define DC21285_PCI_MEM 0x80000000 + +#include <linux/config.h> +#ifndef __ASSEMBLY__ +#include <asm/arch/hardware.h> +#define DC21285_IO(x) ((volatile unsigned long *)(ARMCSR_BASE+(x))) +#else +#define DC21285_IO(x) (x) +#endif + +#define CSR_PCICMD DC21285_IO(0x0004) +#define CSR_CLASSREV DC21285_IO(0x0008) +#define CSR_PCICACHELINESIZE DC21285_IO(0x000c) +#define CSR_PCICSRBASE DC21285_IO(0x0010) +#define CSR_PCICSRIOBASE DC21285_IO(0x0014) +#define CSR_PCISDRAMBASE DC21285_IO(0x0018) +#define CSR_PCIROMBASE DC21285_IO(0x0030) +#define CSR_MBOX0 DC21285_IO(0x0050) +#define CSR_MBOX1 DC21285_IO(0x0054) +#define CSR_MBOX2 DC21285_IO(0x0058) +#define CSR_MBOX3 DC21285_IO(0x005c) +#define CSR_DOORBELL DC21285_IO(0x0060) +#define CSR_DOORBELL_SETUP DC21285_IO(0x0064) +#define CSR_ROMWRITEREG DC21285_IO(0x0068) +#define CSR_CSRBASEMASK DC21285_IO(0x00f8) +#define CSR_CSRBASEOFFSET DC21285_IO(0x00fc) +#define CSR_SDRAMBASEMASK DC21285_IO(0x0100) +#define CSR_SDRAMBASEOFFSET DC21285_IO(0x0104) +#define CSR_ROMBASEMASK DC21285_IO(0x0108) +#define CSR_SDRAMTIMING DC21285_IO(0x010c) +#define CSR_SDRAMADDRSIZE0 DC21285_IO(0x0110) +#define CSR_SDRAMADDRSIZE1 DC21285_IO(0x0114) +#define CSR_SDRAMADDRSIZE2 DC21285_IO(0x0118) +#define CSR_SDRAMADDRSIZE3 DC21285_IO(0x011c) +#define CSR_I2O_INFREEHEAD DC21285_IO(0x0120) +#define CSR_I2O_INPOSTTAIL DC21285_IO(0x0124) +#define CSR_I2O_OUTPOSTHEAD DC21285_IO(0x0128) +#define CSR_I2O_OUTFREETAIL DC21285_IO(0x012c) +#define CSR_I2O_INFREECOUNT DC21285_IO(0x0130) +#define CSR_I2O_OUTPOSTCOUNT DC21285_IO(0x0134) +#define CSR_I2O_INPOSTCOUNT DC21285_IO(0x0138) +#define CSR_SA110_CNTL DC21285_IO(0x013c) +#define SA110_CNTL_INITCMPLETE (1 << 0) +#define SA110_CNTL_ASSERTSERR (1 << 1) +#define SA110_CNTL_RXSERR (1 << 3) +#define SA110_CNTL_SA110DRAMPARITY (1 << 4) +#define SA110_CNTL_PCISDRAMPARITY (1 << 5) +#define SA110_CNTL_DMASDRAMPARITY (1 << 6) +#define SA110_CNTL_DISCARDTIMER (1 << 8) +#define SA110_CNTL_PCINRESET (1 << 9) +#define SA110_CNTL_I2O_256 (0 << 10) +#define SA110_CNTL_I20_512 (1 << 10) +#define SA110_CNTL_I2O_1024 (2 << 10) +#define SA110_CNTL_I2O_2048 (3 << 10) +#define SA110_CNTL_I2O_4096 (4 << 10) +#define SA110_CNTL_I2O_8192 (5 << 10) +#define SA110_CNTL_I2O_16384 (6 << 10) +#define SA110_CNTL_I2O_32768 (7 << 10) +#define SA110_CNTL_WATCHDOG (1 << 13) +#define SA110_CNTL_ROMWIDTH_UNDEF (0 << 14) +#define SA110_CNTL_ROMWIDTH_16 (1 << 14) +#define SA110_CNTL_ROMWIDTH_32 (2 << 14) +#define SA110_CNTL_ROMWIDTH_8 (3 << 14) +#define SA110_CNTL_ROMACCESSTIME(x) ((x)<<16) +#define SA110_CNTL_ROMBURSTTIME(x) ((x)<<20) +#define SA110_CNTL_ROMTRISTATETIME(x) ((x)<<24) +#define SA110_CNTL_XCSDIR(x) ((x)<<28) +#define SA110_CNTL_PCICFN (1 << 31) + +/* + * footbridge_cfn_mode() is used when we want + * to check whether we are the central function + */ +#define __footbridge_cfn_mode() (*CSR_SA110_CNTL & SA110_CNTL_PCICFN) +#if defined(CONFIG_FOOTBRIDGE_HOST) && defined(CONFIG_FOOTBRIDGE_ADDIN) +#define footbridge_cfn_mode() __footbridge_cfn_mode() +#elif defined(CONFIG_FOOTBRIDGE_HOST) +#define footbridge_cfn_mode() (1) +#else +#define footbridge_cfn_mode() (0) +#endif + +#define CSR_PCIADDR_EXTN DC21285_IO(0x0140) +#define CSR_PREFETCHMEMRANGE DC21285_IO(0x0144) +#define CSR_XBUS_CYCLE DC21285_IO(0x0148) +#define CSR_XBUS_IOSTROBE DC21285_IO(0x014c) +#define CSR_DOORBELL_PCI DC21285_IO(0x0150) +#define CSR_DOORBELL_SA110 DC21285_IO(0x0154) +#define CSR_UARTDR DC21285_IO(0x0160) +#define CSR_RXSTAT DC21285_IO(0x0164) +#define CSR_H_UBRLCR DC21285_IO(0x0168) +#define CSR_M_UBRLCR DC21285_IO(0x016c) +#define CSR_L_UBRLCR DC21285_IO(0x0170) +#define CSR_UARTCON DC21285_IO(0x0174) +#define CSR_UARTFLG DC21285_IO(0x0178) +#define CSR_IRQ_STATUS DC21285_IO(0x0180) +#define CSR_IRQ_RAWSTATUS DC21285_IO(0x0184) +#define CSR_IRQ_ENABLE DC21285_IO(0x0188) +#define CSR_IRQ_DISABLE DC21285_IO(0x018c) +#define CSR_IRQ_SOFT DC21285_IO(0x0190) +#define CSR_FIQ_STATUS DC21285_IO(0x0280) +#define CSR_FIQ_RAWSTATUS DC21285_IO(0x0284) +#define CSR_FIQ_ENABLE DC21285_IO(0x0288) +#define CSR_FIQ_DISABLE DC21285_IO(0x028c) +#define CSR_FIQ_SOFT DC21285_IO(0x0290) +#define CSR_TIMER1_LOAD DC21285_IO(0x0300) +#define CSR_TIMER1_VALUE DC21285_IO(0x0304) +#define CSR_TIMER1_CNTL DC21285_IO(0x0308) +#define CSR_TIMER1_CLR DC21285_IO(0x030c) +#define CSR_TIMER2_LOAD DC21285_IO(0x0320) +#define CSR_TIMER2_VALUE DC21285_IO(0x0324) +#define CSR_TIMER2_CNTL DC21285_IO(0x0328) +#define CSR_TIMER2_CLR DC21285_IO(0x032c) +#define CSR_TIMER3_LOAD DC21285_IO(0x0340) +#define CSR_TIMER3_VALUE DC21285_IO(0x0344) +#define CSR_TIMER3_CNTL DC21285_IO(0x0348) +#define CSR_TIMER3_CLR DC21285_IO(0x034c) +#define CSR_TIMER4_LOAD DC21285_IO(0x0360) +#define CSR_TIMER4_VALUE DC21285_IO(0x0364) +#define CSR_TIMER4_CNTL DC21285_IO(0x0368) +#define CSR_TIMER4_CLR DC21285_IO(0x036c) + +#define TIMER_CNTL_ENABLE (1 << 7) +#define TIMER_CNTL_AUTORELOAD (1 << 6) +#define TIMER_CNTL_DIV1 (0) +#define TIMER_CNTL_DIV16 (1 << 2) +#define TIMER_CNTL_DIV256 (2 << 2) +#define TIMER_CNTL_CNTEXT (3 << 2) + + diff --git a/include/asm-arm/hardware/entry-macro-iomd.S b/include/asm-arm/hardware/entry-macro-iomd.S new file mode 100644 index 000000000000..30c7b92c2416 --- /dev/null +++ b/include/asm-arm/hardware/entry-macro-iomd.S @@ -0,0 +1,145 @@ +/* + * arch/arm/commond/entry-macro-iomd.S + * + * Low-level IRQ helper macros for IOC/IOMD based platforms + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +/* IOC / IOMD based hardware */ +#include <asm/hardware/iomd.h> + + .equ ioc_base_high, IOC_BASE & 0xff000000 + .equ ioc_base_low, IOC_BASE & 0x00ff0000 + .macro disable_fiq + mov r12, #ioc_base_high + .if ioc_base_low + orr r12, r12, #ioc_base_low + .endif + strb r12, [r12, #0x38] @ Disable FIQ register + .endm + + .macro get_irqnr_and_base, irqnr, irqstat, base, tmp + mov r4, #ioc_base_high @ point at IOC + .if ioc_base_low + orr r4, r4, #ioc_base_low + .endif + ldrb \irqstat, [r4, #IOMD_IRQREQB] @ get high priority first + ldr \base, =irq_prio_h + teq \irqstat, #0 +#ifdef IOMD_BASE + ldreqb \irqstat, [r4, #IOMD_DMAREQ] @ get dma + addeq \base, \base, #256 @ irq_prio_h table size + teqeq \irqstat, #0 + bne 2406f +#endif + ldreqb \irqstat, [r4, #IOMD_IRQREQA] @ get low priority + addeq \base, \base, #256 @ irq_prio_d table size + teqeq \irqstat, #0 +#ifdef IOMD_IRQREQC + ldreqb \irqstat, [r4, #IOMD_IRQREQC] + addeq \base, \base, #256 @ irq_prio_l table size + teqeq \irqstat, #0 +#endif +#ifdef IOMD_IRQREQD + ldreqb \irqstat, [r4, #IOMD_IRQREQD] + addeq \base, \base, #256 @ irq_prio_lc table size + teqeq \irqstat, #0 +#endif +2406: ldrneb \irqnr, [\base, \irqstat] @ get IRQ number + .endm + +/* + * Interrupt table (incorporates priority). Please note that we + * rely on the order of these tables (see above code). + */ + .align 5 +irq_prio_h: .byte 0, 8, 9, 8,10,10,10,10,11,11,11,11,10,10,10,10 + .byte 12, 8, 9, 8,10,10,10,10,11,11,11,11,10,10,10,10 + .byte 13,13,13,13,10,10,10,10,11,11,11,11,10,10,10,10 + .byte 13,13,13,13,10,10,10,10,11,11,11,11,10,10,10,10 + .byte 14,14,14,14,10,10,10,10,11,11,11,11,10,10,10,10 + .byte 14,14,14,14,10,10,10,10,11,11,11,11,10,10,10,10 + .byte 13,13,13,13,10,10,10,10,11,11,11,11,10,10,10,10 + .byte 13,13,13,13,10,10,10,10,11,11,11,11,10,10,10,10 + .byte 15,15,15,15,10,10,10,10,11,11,11,11,10,10,10,10 + .byte 15,15,15,15,10,10,10,10,11,11,11,11,10,10,10,10 + .byte 13,13,13,13,10,10,10,10,11,11,11,11,10,10,10,10 + .byte 13,13,13,13,10,10,10,10,11,11,11,11,10,10,10,10 + .byte 15,15,15,15,10,10,10,10,11,11,11,11,10,10,10,10 + .byte 15,15,15,15,10,10,10,10,11,11,11,11,10,10,10,10 + .byte 13,13,13,13,10,10,10,10,11,11,11,11,10,10,10,10 + .byte 13,13,13,13,10,10,10,10,11,11,11,11,10,10,10,10 +#ifdef IOMD_BASE +irq_prio_d: .byte 0,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16 + .byte 20,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16 + .byte 21,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16 + .byte 21,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16 + .byte 22,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16 + .byte 22,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16 + .byte 21,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16 + .byte 21,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16 + .byte 23,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16 + .byte 23,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16 + .byte 21,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16 + .byte 21,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16 + .byte 22,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16 + .byte 22,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16 + .byte 21,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16 + .byte 21,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16 +#endif +irq_prio_l: .byte 0, 0, 1, 0, 2, 2, 2, 2, 3, 3, 3, 3, 3, 3, 3, 3 + .byte 4, 0, 1, 0, 2, 2, 2, 2, 3, 3, 3, 3, 3, 3, 3, 3 + .byte 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5 + .byte 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5 + .byte 6, 6, 6, 6, 6, 6, 6, 6, 3, 3, 3, 3, 3, 3, 3, 3 + .byte 6, 6, 6, 6, 6, 6, 6, 6, 3, 3, 3, 3, 3, 3, 3, 3 + .byte 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5 + .byte 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5 + .byte 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7 + .byte 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7 + .byte 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7 + .byte 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7 + .byte 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7 + .byte 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7 + .byte 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7 + .byte 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7 +#ifdef IOMD_IRQREQC +irq_prio_lc: .byte 24,24,25,24,26,26,26,26,27,27,27,27,27,27,27,27 + .byte 28,24,25,24,26,26,26,26,27,27,27,27,27,27,27,27 + .byte 29,29,29,29,29,29,29,29,29,29,29,29,29,29,29,29 + .byte 29,29,29,29,29,29,29,29,29,29,29,29,29,29,29,29 + .byte 30,30,30,30,30,30,30,30,27,27,27,27,27,27,27,27 + .byte 30,30,30,30,30,30,30,30,27,27,27,27,27,27,27,27 + .byte 29,29,29,29,29,29,29,29,29,29,29,29,29,29,29,29 + .byte 29,29,29,29,29,29,29,29,29,29,29,29,29,29,29,29 + .byte 31,31,31,31,31,31,31,31,31,31,31,31,31,31,31,31 + .byte 31,31,31,31,31,31,31,31,31,31,31,31,31,31,31,31 + .byte 31,31,31,31,31,31,31,31,31,31,31,31,31,31,31,31 + .byte 31,31,31,31,31,31,31,31,31,31,31,31,31,31,31,31 + .byte 31,31,31,31,31,31,31,31,31,31,31,31,31,31,31,31 + .byte 31,31,31,31,31,31,31,31,31,31,31,31,31,31,31,31 + .byte 31,31,31,31,31,31,31,31,31,31,31,31,31,31,31,31 + .byte 31,31,31,31,31,31,31,31,31,31,31,31,31,31,31,31 +#endif +#ifdef IOMD_IRQREQD +irq_prio_ld: .byte 40,40,41,40,42,42,42,42,43,43,43,43,43,43,43,43 + .byte 44,40,41,40,42,42,42,42,43,43,43,43,43,43,43,43 + .byte 45,45,45,45,45,45,45,45,45,45,45,45,45,45,45,45 + .byte 45,45,45,45,45,45,45,45,45,45,45,45,45,45,45,45 + .byte 46,46,46,46,46,46,46,46,43,43,43,43,43,43,43,43 + .byte 46,46,46,46,46,46,46,46,43,43,43,43,43,43,43,43 + .byte 45,45,45,45,45,45,45,45,45,45,45,45,45,45,45,45 + .byte 45,45,45,45,45,45,45,45,45,45,45,45,45,45,45,45 + .byte 47,47,47,47,47,47,47,47,47,47,47,47,47,47,47,47 + .byte 47,47,47,47,47,47,47,47,47,47,47,47,47,47,47,47 + .byte 47,47,47,47,47,47,47,47,47,47,47,47,47,47,47,47 + .byte 47,47,47,47,47,47,47,47,47,47,47,47,47,47,47,47 + .byte 47,47,47,47,47,47,47,47,47,47,47,47,47,47,47,47 + .byte 47,47,47,47,47,47,47,47,47,47,47,47,47,47,47,47 + .byte 47,47,47,47,47,47,47,47,47,47,47,47,47,47,47,47 + .byte 47,47,47,47,47,47,47,47,47,47,47,47,47,47,47,47 +#endif + diff --git a/include/asm-arm/hardware/ep7211.h b/include/asm-arm/hardware/ep7211.h new file mode 100644 index 000000000000..017aa68f612d --- /dev/null +++ b/include/asm-arm/hardware/ep7211.h @@ -0,0 +1,40 @@ +/* + * linux/include/asm-arm/hardware/ep7211.h + * + * This file contains the hardware definitions of the EP7211 internal + * registers. + * + * Copyright (C) 2001 Blue Mug, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef __ASM_HARDWARE_EP7211_H +#define __ASM_HARDWARE_EP7211_H + +#include <asm/hardware/clps7111.h> + +/* + * define EP7211_BASE to be the base address of the region + * you want to access. + */ + +#define EP7211_PHYS_BASE (0x80000000) + +/* + * XXX miket@bluemug.com: need to introduce EP7211 registers (those not + * present in 7212) here. + */ + +#endif /* __ASM_HARDWARE_EP7211_H */ diff --git a/include/asm-arm/hardware/ep7212.h b/include/asm-arm/hardware/ep7212.h new file mode 100644 index 000000000000..0e952e747073 --- /dev/null +++ b/include/asm-arm/hardware/ep7212.h @@ -0,0 +1,83 @@ +/* + * linux/include/asm-arm/hardware/ep7212.h + * + * This file contains the hardware definitions of the EP7212 internal + * registers. + * + * Copyright (C) 2000 Deep Blue Solutions Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef __ASM_HARDWARE_EP7212_H +#define __ASM_HARDWARE_EP7212_H + +/* + * define EP7212_BASE to be the base address of the region + * you want to access. + */ + +#define EP7212_PHYS_BASE (0x80000000) + +#ifndef __ASSEMBLY__ +#define ep_readl(off) __raw_readl(EP7212_BASE + (off)) +#define ep_writel(val,off) __raw_writel(val, EP7212_BASE + (off)) +#endif + +/* + * These registers are specific to the EP7212 only + */ +#define DAIR 0x2000 +#define DAIR0 0x2040 +#define DAIDR1 0x2080 +#define DAIDR2 0x20c0 +#define DAISR 0x2100 +#define SYSCON3 0x2200 +#define INTSR3 0x2240 +#define INTMR3 0x2280 +#define LEDFLSH 0x22c0 + +#define DAIR_DAIEN (1 << 16) +#define DAIR_ECS (1 << 17) +#define DAIR_LCTM (1 << 19) +#define DAIR_LCRM (1 << 20) +#define DAIR_RCTM (1 << 21) +#define DAIR_RCRM (1 << 22) +#define DAIR_LBM (1 << 23) + +#define DAIDR2_FIFOEN (1 << 15) +#define DAIDR2_FIFOLEFT (0x0d << 16) +#define DAIDR2_FIFORIGHT (0x11 << 16) + +#define DAISR_RCTS (1 << 0) +#define DAISR_RCRS (1 << 1) +#define DAISR_LCTS (1 << 2) +#define DAISR_LCRS (1 << 3) +#define DAISR_RCTU (1 << 4) +#define DAISR_RCRO (1 << 5) +#define DAISR_LCTU (1 << 6) +#define DAISR_LCRO (1 << 7) +#define DAISR_RCNF (1 << 8) +#define DAISR_RCNE (1 << 9) +#define DAISR_LCNF (1 << 10) +#define DAISR_LCNE (1 << 11) +#define DAISR_FIFO (1 << 12) + +#define SYSCON3_ADCCON (1 << 0) +#define SYSCON3_DAISEL (1 << 3) +#define SYSCON3_ADCCKNSEN (1 << 4) +#define SYSCON3_FASTWAKE (1 << 8) +#define SYSCON3_DAIEN (1 << 9) + +#endif /* __ASM_HARDWARE_EP7212_H */ diff --git a/include/asm-arm/hardware/icst307.h b/include/asm-arm/hardware/icst307.h new file mode 100644 index 000000000000..ff8618a441c0 --- /dev/null +++ b/include/asm-arm/hardware/icst307.h @@ -0,0 +1,38 @@ +/* + * linux/include/asm-arm/hardware/icst307.h + * + * Copyright (C) 2003 Deep Blue Solutions, Ltd, All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Support functions for calculating clocks/divisors for the ICS307 + * clock generators. See http://www.icst.com/ for more information + * on these devices. + * + * This file is similar to the icst525.h file + */ +#ifndef ASMARM_HARDWARE_ICST307_H +#define ASMARM_HARDWARE_ICST307_H + +struct icst307_params { + unsigned long ref; + unsigned long vco_max; /* inclusive */ + unsigned short vd_min; /* inclusive */ + unsigned short vd_max; /* inclusive */ + unsigned char rd_min; /* inclusive */ + unsigned char rd_max; /* inclusive */ +}; + +struct icst307_vco { + unsigned short v; + unsigned char r; + unsigned char s; +}; + +unsigned long icst307_khz(const struct icst307_params *p, struct icst307_vco vco); +struct icst307_vco icst307_khz_to_vco(const struct icst307_params *p, unsigned long freq); +struct icst307_vco icst307_ps_to_vco(const struct icst307_params *p, unsigned long period); + +#endif diff --git a/include/asm-arm/hardware/icst525.h b/include/asm-arm/hardware/icst525.h new file mode 100644 index 000000000000..edd5a5704406 --- /dev/null +++ b/include/asm-arm/hardware/icst525.h @@ -0,0 +1,36 @@ +/* + * linux/include/asm-arm/hardware/icst525.h + * + * Copyright (C) 2003 Deep Blue Solutions, Ltd, All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Support functions for calculating clocks/divisors for the ICST525 + * clock generators. See http://www.icst.com/ for more information + * on these devices. + */ +#ifndef ASMARM_HARDWARE_ICST525_H +#define ASMARM_HARDWARE_ICST525_H + +struct icst525_params { + unsigned long ref; + unsigned long vco_max; /* inclusive */ + unsigned short vd_min; /* inclusive */ + unsigned short vd_max; /* inclusive */ + unsigned char rd_min; /* inclusive */ + unsigned char rd_max; /* inclusive */ +}; + +struct icst525_vco { + unsigned short v; + unsigned char r; + unsigned char s; +}; + +unsigned long icst525_khz(const struct icst525_params *p, struct icst525_vco vco); +struct icst525_vco icst525_khz_to_vco(const struct icst525_params *p, unsigned long freq); +struct icst525_vco icst525_ps_to_vco(const struct icst525_params *p, unsigned long period); + +#endif diff --git a/include/asm-arm/hardware/ioc.h b/include/asm-arm/hardware/ioc.h new file mode 100644 index 000000000000..b3b46ef65943 --- /dev/null +++ b/include/asm-arm/hardware/ioc.h @@ -0,0 +1,72 @@ +/* + * linux/include/asm-arm/hardware/ioc.h + * + * Copyright (C) Russell King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Use these macros to read/write the IOC. All it does is perform the actual + * read/write. + */ +#ifndef __ASMARM_HARDWARE_IOC_H +#define __ASMARM_HARDWARE_IOC_H + +#ifndef __ASSEMBLY__ + +/* + * We use __raw_base variants here so that we give the compiler the + * chance to keep IOC_BASE in a register. + */ +#define ioc_readb(off) __raw_readb(IOC_BASE + (off)) +#define ioc_writeb(val,off) __raw_writeb(val, IOC_BASE + (off)) + +#endif + +#define IOC_CONTROL (0x00) +#define IOC_KARTTX (0x04) +#define IOC_KARTRX (0x04) + +#define IOC_IRQSTATA (0x10) +#define IOC_IRQREQA (0x14) +#define IOC_IRQCLRA (0x14) +#define IOC_IRQMASKA (0x18) + +#define IOC_IRQSTATB (0x20) +#define IOC_IRQREQB (0x24) +#define IOC_IRQMASKB (0x28) + +#define IOC_FIQSTAT (0x30) +#define IOC_FIQREQ (0x34) +#define IOC_FIQMASK (0x38) + +#define IOC_T0CNTL (0x40) +#define IOC_T0LTCHL (0x40) +#define IOC_T0CNTH (0x44) +#define IOC_T0LTCHH (0x44) +#define IOC_T0GO (0x48) +#define IOC_T0LATCH (0x4c) + +#define IOC_T1CNTL (0x50) +#define IOC_T1LTCHL (0x50) +#define IOC_T1CNTH (0x54) +#define IOC_T1LTCHH (0x54) +#define IOC_T1GO (0x58) +#define IOC_T1LATCH (0x5c) + +#define IOC_T2CNTL (0x60) +#define IOC_T2LTCHL (0x60) +#define IOC_T2CNTH (0x64) +#define IOC_T2LTCHH (0x64) +#define IOC_T2GO (0x68) +#define IOC_T2LATCH (0x6c) + +#define IOC_T3CNTL (0x70) +#define IOC_T3LTCHL (0x70) +#define IOC_T3CNTH (0x74) +#define IOC_T3LTCHH (0x74) +#define IOC_T3GO (0x78) +#define IOC_T3LATCH (0x7c) + +#endif diff --git a/include/asm-arm/hardware/iomd.h b/include/asm-arm/hardware/iomd.h new file mode 100644 index 000000000000..82fa2c279a18 --- /dev/null +++ b/include/asm-arm/hardware/iomd.h @@ -0,0 +1,227 @@ +/* + * linux/include/asm-arm/hardware/iomd.h + * + * Copyright (C) 1999 Russell King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This file contains information out the IOMD ASIC used in the + * Acorn RiscPC and subsequently integrated into the CLPS7500 chips. + */ +#ifndef __ASMARM_HARDWARE_IOMD_H +#define __ASMARM_HARDWARE_IOMD_H + +#include <linux/config.h> + +#ifndef __ASSEMBLY__ + +/* + * We use __raw_base variants here so that we give the compiler the + * chance to keep IOC_BASE in a register. + */ +#define iomd_readb(off) __raw_readb(IOMD_BASE + (off)) +#define iomd_readl(off) __raw_readl(IOMD_BASE + (off)) +#define iomd_writeb(val,off) __raw_writeb(val, IOMD_BASE + (off)) +#define iomd_writel(val,off) __raw_writel(val, IOMD_BASE + (off)) + +#endif + +#define IOMD_CONTROL (0x000) +#define IOMD_KARTTX (0x004) +#define IOMD_KARTRX (0x004) +#define IOMD_KCTRL (0x008) + +#ifdef CONFIG_ARCH_CLPS7500 +#define IOMD_IOLINES (0x00C) +#endif + +#define IOMD_IRQSTATA (0x010) +#define IOMD_IRQREQA (0x014) +#define IOMD_IRQCLRA (0x014) +#define IOMD_IRQMASKA (0x018) + +#ifdef CONFIG_ARCH_CLPS7500 +#define IOMD_SUSMODE (0x01C) +#endif + +#define IOMD_IRQSTATB (0x020) +#define IOMD_IRQREQB (0x024) +#define IOMD_IRQMASKB (0x028) + +#define IOMD_FIQSTAT (0x030) +#define IOMD_FIQREQ (0x034) +#define IOMD_FIQMASK (0x038) + +#ifdef CONFIG_ARCH_CLPS7500 +#define IOMD_CLKCTL (0x03C) +#endif + +#define IOMD_T0CNTL (0x040) +#define IOMD_T0LTCHL (0x040) +#define IOMD_T0CNTH (0x044) +#define IOMD_T0LTCHH (0x044) +#define IOMD_T0GO (0x048) +#define IOMD_T0LATCH (0x04c) + +#define IOMD_T1CNTL (0x050) +#define IOMD_T1LTCHL (0x050) +#define IOMD_T1CNTH (0x054) +#define IOMD_T1LTCHH (0x054) +#define IOMD_T1GO (0x058) +#define IOMD_T1LATCH (0x05c) + +#ifdef CONFIG_ARCH_CLPS7500 +#define IOMD_IRQSTATC (0x060) +#define IOMD_IRQREQC (0x064) +#define IOMD_IRQMASKC (0x068) + +#define IOMD_VIDMUX (0x06c) + +#define IOMD_IRQSTATD (0x070) +#define IOMD_IRQREQD (0x074) +#define IOMD_IRQMASKD (0x078) +#endif + +#define IOMD_ROMCR0 (0x080) +#define IOMD_ROMCR1 (0x084) +#ifdef CONFIG_ARCH_RPC +#define IOMD_DRAMCR (0x088) +#endif +#define IOMD_REFCR (0x08C) + +#define IOMD_FSIZE (0x090) +#define IOMD_ID0 (0x094) +#define IOMD_ID1 (0x098) +#define IOMD_VERSION (0x09C) + +#ifdef CONFIG_ARCH_RPC +#define IOMD_MOUSEX (0x0A0) +#define IOMD_MOUSEY (0x0A4) +#endif + +#ifdef CONFIG_ARCH_CLPS7500 +#define IOMD_MSEDAT (0x0A8) +#define IOMD_MSECTL (0x0Ac) +#endif + +#ifdef CONFIG_ARCH_RPC +#define IOMD_DMATCR (0x0C0) +#endif +#define IOMD_IOTCR (0x0C4) +#define IOMD_ECTCR (0x0C8) +#ifdef CONFIG_ARCH_RPC +#define IOMD_DMAEXT (0x0CC) +#endif +#ifdef CONFIG_ARCH_CLPS7500 +#define IOMD_ASTCR (0x0CC) +#define IOMD_DRAMCR (0x0D0) +#define IOMD_SELFREF (0x0D4) +#define IOMD_ATODICR (0x0E0) +#define IOMD_ATODSR (0x0E4) +#define IOMD_ATODCC (0x0E8) +#define IOMD_ATODCNT1 (0x0EC) +#define IOMD_ATODCNT2 (0x0F0) +#define IOMD_ATODCNT3 (0x0F4) +#define IOMD_ATODCNT4 (0x0F8) +#endif + +#ifdef CONFIG_ARCH_RPC +#define DMA_EXT_IO0 1 +#define DMA_EXT_IO1 2 +#define DMA_EXT_IO2 4 +#define DMA_EXT_IO3 8 + +#define IOMD_IO0CURA (0x100) +#define IOMD_IO0ENDA (0x104) +#define IOMD_IO0CURB (0x108) +#define IOMD_IO0ENDB (0x10C) +#define IOMD_IO0CR (0x110) +#define IOMD_IO0ST (0x114) + +#define IOMD_IO1CURA (0x120) +#define IOMD_IO1ENDA (0x124) +#define IOMD_IO1CURB (0x128) +#define IOMD_IO1ENDB (0x12C) +#define IOMD_IO1CR (0x130) +#define IOMD_IO1ST (0x134) + +#define IOMD_IO2CURA (0x140) +#define IOMD_IO2ENDA (0x144) +#define IOMD_IO2CURB (0x148) +#define IOMD_IO2ENDB (0x14C) +#define IOMD_IO2CR (0x150) +#define IOMD_IO2ST (0x154) + +#define IOMD_IO3CURA (0x160) +#define IOMD_IO3ENDA (0x164) +#define IOMD_IO3CURB (0x168) +#define IOMD_IO3ENDB (0x16C) +#define IOMD_IO3CR (0x170) +#define IOMD_IO3ST (0x174) +#endif + +#define IOMD_SD0CURA (0x180) +#define IOMD_SD0ENDA (0x184) +#define IOMD_SD0CURB (0x188) +#define IOMD_SD0ENDB (0x18C) +#define IOMD_SD0CR (0x190) +#define IOMD_SD0ST (0x194) + +#ifdef CONFIG_ARCH_RPC +#define IOMD_SD1CURA (0x1A0) +#define IOMD_SD1ENDA (0x1A4) +#define IOMD_SD1CURB (0x1A8) +#define IOMD_SD1ENDB (0x1AC) +#define IOMD_SD1CR (0x1B0) +#define IOMD_SD1ST (0x1B4) +#endif + +#define IOMD_CURSCUR (0x1C0) +#define IOMD_CURSINIT (0x1C4) + +#define IOMD_VIDCUR (0x1D0) +#define IOMD_VIDEND (0x1D4) +#define IOMD_VIDSTART (0x1D8) +#define IOMD_VIDINIT (0x1DC) +#define IOMD_VIDCR (0x1E0) + +#define IOMD_DMASTAT (0x1F0) +#define IOMD_DMAREQ (0x1F4) +#define IOMD_DMAMASK (0x1F8) + +#define DMA_END_S (1 << 31) +#define DMA_END_L (1 << 30) + +#define DMA_CR_C 0x80 +#define DMA_CR_D 0x40 +#define DMA_CR_E 0x20 + +#define DMA_ST_OFL 4 +#define DMA_ST_INT 2 +#define DMA_ST_AB 1 + +/* + * DMA (MEMC) compatibility + */ +#define HALF_SAM vram_half_sam +#define VDMA_ALIGNMENT (HALF_SAM * 2) +#define VDMA_XFERSIZE (HALF_SAM) +#define VDMA_INIT IOMD_VIDINIT +#define VDMA_START IOMD_VIDSTART +#define VDMA_END IOMD_VIDEND + +#ifndef __ASSEMBLY__ +extern unsigned int vram_half_sam; +#define video_set_dma(start,end,offset) \ +do { \ + outl (SCREEN_START + start, VDMA_START); \ + outl (SCREEN_START + end - VDMA_XFERSIZE, VDMA_END); \ + if (offset >= end - VDMA_XFERSIZE) \ + offset |= 0x40000000; \ + outl (SCREEN_START + offset, VDMA_INIT); \ +} while (0) +#endif + +#endif diff --git a/include/asm-arm/hardware/linkup-l1110.h b/include/asm-arm/hardware/linkup-l1110.h new file mode 100644 index 000000000000..7ec91168a576 --- /dev/null +++ b/include/asm-arm/hardware/linkup-l1110.h @@ -0,0 +1,48 @@ +/* +* +* Definitions for H3600 Handheld Computer +* +* Copyright 2001 Compaq Computer Corporation. +* +* Use consistent with the GNU GPL is permitted, +* provided that this copyright notice is +* preserved in its entirety in all copies and derived works. +* +* COMPAQ COMPUTER CORPORATION MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, +* AS TO THE USEFULNESS OR CORRECTNESS OF THIS CODE OR ITS +* FITNESS FOR ANY PARTICULAR PURPOSE. +* +* Author: Jamey Hicks. +* +*/ + +/* LinkUp Systems PCCard/CompactFlash Interface for SA-1100 */ + +/* PC Card Status Register */ +#define LINKUP_PRS_S1 (1 << 0) /* voltage control bits S1-S4 */ +#define LINKUP_PRS_S2 (1 << 1) +#define LINKUP_PRS_S3 (1 << 2) +#define LINKUP_PRS_S4 (1 << 3) +#define LINKUP_PRS_BVD1 (1 << 4) +#define LINKUP_PRS_BVD2 (1 << 5) +#define LINKUP_PRS_VS1 (1 << 6) +#define LINKUP_PRS_VS2 (1 << 7) +#define LINKUP_PRS_RDY (1 << 8) +#define LINKUP_PRS_CD1 (1 << 9) +#define LINKUP_PRS_CD2 (1 << 10) + +/* PC Card Command Register */ +#define LINKUP_PRC_S1 (1 << 0) +#define LINKUP_PRC_S2 (1 << 1) +#define LINKUP_PRC_S3 (1 << 2) +#define LINKUP_PRC_S4 (1 << 3) +#define LINKUP_PRC_RESET (1 << 4) +#define LINKUP_PRC_APOE (1 << 5) /* Auto Power Off Enable: clears S1-S4 when either nCD goes high */ +#define LINKUP_PRC_CFE (1 << 6) /* CompactFlash mode Enable: addresses A[10:0] only, A[25:11] high */ +#define LINKUP_PRC_SOE (1 << 7) /* signal output driver enable */ +#define LINKUP_PRC_SSP (1 << 8) /* sock select polarity: 0 for socket 0, 1 for socket 1 */ +#define LINKUP_PRC_MBZ (1 << 15) /* must be zero */ + +struct linkup_l1110 { + volatile short prc; +}; diff --git a/include/asm-arm/hardware/locomo.h b/include/asm-arm/hardware/locomo.h new file mode 100644 index 000000000000..5f10048ec54e --- /dev/null +++ b/include/asm-arm/hardware/locomo.h @@ -0,0 +1,206 @@ +/* + * linux/include/asm-arm/hardware/locomo.h + * + * This file contains the definitions for the LoCoMo G/A Chip + * + * (C) Copyright 2004 John Lenz + * + * May be copied or modified under the terms of the GNU General Public + * License. See linux/COPYING for more information. + * + * Based on sa1111.h + */ +#ifndef _ASM_ARCH_LOCOMO +#define _ASM_ARCH_LOCOMO + +#define locomo_writel(val,addr) ({ *(volatile u16 *)(addr) = (val); }) +#define locomo_readl(addr) (*(volatile u16 *)(addr)) + +/* LOCOMO version */ +#define LOCOMO_VER 0x00 + +/* Pin status */ +#define LOCOMO_ST 0x04 + +/* Pin status */ +#define LOCOMO_C32K 0x08 + +/* Interrupt controller */ +#define LOCOMO_ICR 0x0C + +/* MCS decoder for boot selecting */ +#define LOCOMO_MCSX0 0x10 +#define LOCOMO_MCSX1 0x14 +#define LOCOMO_MCSX2 0x18 +#define LOCOMO_MCSX3 0x1c + +/* Touch panel controller */ +#define LOCOMO_ASD 0x20 /* AD start delay */ +#define LOCOMO_HSD 0x28 /* HSYS delay */ +#define LOCOMO_HSC 0x2c /* HSYS period */ +#define LOCOMO_TADC 0x30 /* tablet ADC clock */ + + +/* Long time timer */ +#define LOCOMO_LTC 0xd8 /* LTC interrupt setting */ +#define LOCOMO_LTINT 0xdc /* LTC interrupt */ + +/* DAC control signal for LCD (COMADJ ) */ +#define LOCOMO_DAC 0xe0 +/* DAC control */ +#define LOCOMO_DAC_SCLOEB 0x08 /* SCL pin output data */ +#define LOCOMO_DAC_TEST 0x04 /* Test bit */ +#define LOCOMO_DAC_SDA 0x02 /* SDA pin level (read-only) */ +#define LOCOMO_DAC_SDAOEB 0x01 /* SDA pin output data */ + +/* SPI interface */ +#define LOCOMO_SPIMD 0x60 /* SPI mode setting */ +#define LOCOMO_SPICT 0x64 /* SPI mode control */ +#define LOCOMO_SPIST 0x68 /* SPI status */ +#define LOCOMO_SPIIS 0x70 /* SPI interrupt status */ +#define LOCOMO_SPIWE 0x74 /* SPI interrupt status write enable */ +#define LOCOMO_SPIIE 0x78 /* SPI interrupt enable */ +#define LOCOMO_SPIIR 0x7c /* SPI interrupt request */ +#define LOCOMO_SPITD 0x80 /* SPI transfer data write */ +#define LOCOMO_SPIRD 0x84 /* SPI receive data read */ +#define LOCOMO_SPITS 0x88 /* SPI transfer data shift */ +#define LOCOMO_SPIRS 0x8C /* SPI receive data shift */ +#define LOCOMO_SPI_TEND (1 << 3) /* Transfer end bit */ +#define LOCOMO_SPI_OVRN (1 << 2) /* Over Run bit */ +#define LOCOMO_SPI_RFW (1 << 1) /* write buffer bit */ +#define LOCOMO_SPI_RFR (1) /* read buffer bit */ + +/* GPIO */ +#define LOCOMO_GPD 0x90 /* GPIO direction */ +#define LOCOMO_GPE 0x94 /* GPIO input enable */ +#define LOCOMO_GPL 0x98 /* GPIO level */ +#define LOCOMO_GPO 0x9c /* GPIO out data setteing */ +#define LOCOMO_GRIE 0xa0 /* GPIO rise detection */ +#define LOCOMO_GFIE 0xa4 /* GPIO fall detection */ +#define LOCOMO_GIS 0xa8 /* GPIO edge detection status */ +#define LOCOMO_GWE 0xac /* GPIO status write enable */ +#define LOCOMO_GIE 0xb0 /* GPIO interrupt enable */ +#define LOCOMO_GIR 0xb4 /* GPIO interrupt request */ +#define LOCOMO_GPIO(Nb) (0x01 << (Nb)) +#define LOCOMO_GPIO_RTS LOCOMO_GPIO(0) +#define LOCOMO_GPIO_CTS LOCOMO_GPIO(1) +#define LOCOMO_GPIO_DSR LOCOMO_GPIO(2) +#define LOCOMO_GPIO_DTR LOCOMO_GPIO(3) +#define LOCOMO_GPIO_LCD_VSHA_ON LOCOMO_GPIO(4) +#define LOCOMO_GPIO_LCD_VSHD_ON LOCOMO_GPIO(5) +#define LOCOMO_GPIO_LCD_VEE_ON LOCOMO_GPIO(6) +#define LOCOMO_GPIO_LCD_MOD LOCOMO_GPIO(7) +#define LOCOMO_GPIO_DAC_ON LOCOMO_GPIO(8) +#define LOCOMO_GPIO_FL_VR LOCOMO_GPIO(9) +#define LOCOMO_GPIO_DAC_SDATA LOCOMO_GPIO(10) +#define LOCOMO_GPIO_DAC_SCK LOCOMO_GPIO(11) +#define LOCOMO_GPIO_DAC_SLOAD LOCOMO_GPIO(12) + +/* Start the definitions of the devices. Each device has an initial + * base address and a series of offsets from that base address. */ + +/* Keyboard controller */ +#define LOCOMO_KEYBOARD 0x40 +#define LOCOMO_KIB 0x00 /* KIB level */ +#define LOCOMO_KSC 0x04 /* KSTRB control */ +#define LOCOMO_KCMD 0x08 /* KSTRB command */ +#define LOCOMO_KIC 0x0c /* Key interrupt */ + +/* Front light adjustment controller */ +#define LOCOMO_FRONTLIGHT 0xc8 +#define LOCOMO_ALS 0x00 /* Adjust light cycle */ +#define LOCOMO_ALD 0x04 /* Adjust light duty */ + +/* Backlight controller: TFT signal */ +#define LOCOMO_BACKLIGHT 0x38 +#define LOCOMO_TC 0x00 /* TFT control signal */ +#define LOCOMO_CPSD 0x04 /* CPS delay */ + +/* Audio controller */ +#define LOCOMO_AUDIO 0x54 +#define LOCOMO_ACC 0x00 /* Audio clock */ +#define LOCOMO_PAIF 0x7C /* PCM audio interface */ +/* Audio clock */ +#define LOCOMO_ACC_XON 0x80 +#define LOCOMO_ACC_XEN 0x40 +#define LOCOMO_ACC_XSEL0 0x00 +#define LOCOMO_ACC_XSEL1 0x20 +#define LOCOMO_ACC_MCLKEN 0x10 +#define LOCOMO_ACC_64FSEN 0x08 +#define LOCOMO_ACC_CLKSEL000 0x00 /* mclk 2 */ +#define LOCOMO_ACC_CLKSEL001 0x01 /* mclk 3 */ +#define LOCOMO_ACC_CLKSEL010 0x02 /* mclk 4 */ +#define LOCOMO_ACC_CLKSEL011 0x03 /* mclk 6 */ +#define LOCOMO_ACC_CLKSEL100 0x04 /* mclk 8 */ +#define LOCOMO_ACC_CLKSEL101 0x05 /* mclk 12 */ +/* PCM audio interface */ +#define LOCOMO_PAIF_SCINV 0x20 +#define LOCOMO_PAIF_SCEN 0x10 +#define LOCOMO_PAIF_LRCRST 0x08 +#define LOCOMO_PAIF_LRCEVE 0x04 +#define LOCOMO_PAIF_LRCINV 0x02 +#define LOCOMO_PAIF_LRCEN 0x01 + +/* LED controller */ +#define LOCOMO_LED 0xe8 +#define LOCOMO_LPT0 0x00 +#define LOCOMO_LPT1 0x04 +/* LED control */ +#define LOCOMO_LPT_TOFH 0x80 +#define LOCOMO_LPT_TOFL 0x08 +#define LOCOMO_LPT_TOH(TOH) ((TOH & 0x7) << 4) +#define LOCOMO_LPT_TOL(TOL) ((TOL & 0x7)) + +extern struct bus_type locomo_bus_type; + +#define LOCOMO_DEVID_KEYBOARD 0 +#define LOCOMO_DEVID_FRONTLIGHT 1 +#define LOCOMO_DEVID_BACKLIGHT 2 +#define LOCOMO_DEVID_AUDIO 3 +#define LOCOMO_DEVID_LED 4 +#define LOCOMO_DEVID_UART 5 + +struct locomo_dev { + struct device dev; + unsigned int devid; + unsigned int irq[1]; + + void *mapbase; + unsigned long length; + + u64 dma_mask; +}; + +#define LOCOMO_DEV(_d) container_of((_d), struct locomo_dev, dev) + +#define locomo_get_drvdata(d) dev_get_drvdata(&(d)->dev) +#define locomo_set_drvdata(d,p) dev_set_drvdata(&(d)->dev, p) + +struct locomo_driver { + struct device_driver drv; + unsigned int devid; + int (*probe)(struct locomo_dev *); + int (*remove)(struct locomo_dev *); + int (*suspend)(struct locomo_dev *, pm_message_t); + int (*resume)(struct locomo_dev *); +}; + +#define LOCOMO_DRV(_d) container_of((_d), struct locomo_driver, drv) + +#define LOCOMO_DRIVER_NAME(_ldev) ((_ldev)->dev.driver->name) + +void locomo_lcd_power(struct locomo_dev *, int, unsigned int); + +int locomo_driver_register(struct locomo_driver *); +void locomo_driver_unregister(struct locomo_driver *); + +/* GPIO control functions */ +void locomo_gpio_set_dir(struct locomo_dev *ldev, unsigned int bits, unsigned int dir); +unsigned int locomo_gpio_read_level(struct locomo_dev *ldev, unsigned int bits); +unsigned int locomo_gpio_read_output(struct locomo_dev *ldev, unsigned int bits); +void locomo_gpio_write(struct locomo_dev *ldev, unsigned int bits, unsigned int set); + +/* M62332 control function */ +void locomo_m62332_senddata(struct locomo_dev *ldev, unsigned int dac_data, int channel); + +#endif diff --git a/include/asm-arm/hardware/memc.h b/include/asm-arm/hardware/memc.h new file mode 100644 index 000000000000..8aef5aa0e01b --- /dev/null +++ b/include/asm-arm/hardware/memc.h @@ -0,0 +1,26 @@ +/* + * linux/include/asm-arm/hardware/memc.h + * + * Copyright (C) Russell King. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#define VDMA_ALIGNMENT PAGE_SIZE +#define VDMA_XFERSIZE 16 +#define VDMA_INIT 0 +#define VDMA_START 1 +#define VDMA_END 2 + +#ifndef __ASSEMBLY__ +extern void memc_write(unsigned int reg, unsigned long val); + +#define video_set_dma(start,end,offset) \ +do { \ + memc_write (VDMA_START, (start >> 2)); \ + memc_write (VDMA_END, (end - VDMA_XFERSIZE) >> 2); \ + memc_write (VDMA_INIT, (offset >> 2)); \ +} while (0) + +#endif diff --git a/include/asm-arm/hardware/pci_v3.h b/include/asm-arm/hardware/pci_v3.h new file mode 100644 index 000000000000..4d497bdb9a97 --- /dev/null +++ b/include/asm-arm/hardware/pci_v3.h @@ -0,0 +1,186 @@ +/* + * linux/include/asm-arm/hardware/pci_v3.h + * + * Internal header file PCI V3 chip + * + * Copyright (C) ARM Limited + * Copyright (C) 2000-2001 Deep Blue Solutions Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef ASM_ARM_HARDWARE_PCI_V3_H +#define ASM_ARM_HARDWARE_PCI_V3_H + +/* ------------------------------------------------------------------------------- + * V3 Local Bus to PCI Bridge definitions + * ------------------------------------------------------------------------------- + * Registers (these are taken from page 129 of the EPC User's Manual Rev 1.04 + * All V3 register names are prefaced by V3_ to avoid clashing with any other + * PCI definitions. Their names match the user's manual. + * + * I'm assuming that I20 is disabled. + * + */ +#define V3_PCI_VENDOR 0x00000000 +#define V3_PCI_DEVICE 0x00000002 +#define V3_PCI_CMD 0x00000004 +#define V3_PCI_STAT 0x00000006 +#define V3_PCI_CC_REV 0x00000008 +#define V3_PCI_HDR_CFG 0x0000000C +#define V3_PCI_IO_BASE 0x00000010 +#define V3_PCI_BASE0 0x00000014 +#define V3_PCI_BASE1 0x00000018 +#define V3_PCI_SUB_VENDOR 0x0000002C +#define V3_PCI_SUB_ID 0x0000002E +#define V3_PCI_ROM 0x00000030 +#define V3_PCI_BPARAM 0x0000003C +#define V3_PCI_MAP0 0x00000040 +#define V3_PCI_MAP1 0x00000044 +#define V3_PCI_INT_STAT 0x00000048 +#define V3_PCI_INT_CFG 0x0000004C +#define V3_LB_BASE0 0x00000054 +#define V3_LB_BASE1 0x00000058 +#define V3_LB_MAP0 0x0000005E +#define V3_LB_MAP1 0x00000062 +#define V3_LB_BASE2 0x00000064 +#define V3_LB_MAP2 0x00000066 +#define V3_LB_SIZE 0x00000068 +#define V3_LB_IO_BASE 0x0000006E +#define V3_FIFO_CFG 0x00000070 +#define V3_FIFO_PRIORITY 0x00000072 +#define V3_FIFO_STAT 0x00000074 +#define V3_LB_ISTAT 0x00000076 +#define V3_LB_IMASK 0x00000077 +#define V3_SYSTEM 0x00000078 +#define V3_LB_CFG 0x0000007A +#define V3_PCI_CFG 0x0000007C +#define V3_DMA_PCI_ADR0 0x00000080 +#define V3_DMA_PCI_ADR1 0x00000090 +#define V3_DMA_LOCAL_ADR0 0x00000084 +#define V3_DMA_LOCAL_ADR1 0x00000094 +#define V3_DMA_LENGTH0 0x00000088 +#define V3_DMA_LENGTH1 0x00000098 +#define V3_DMA_CSR0 0x0000008B +#define V3_DMA_CSR1 0x0000009B +#define V3_DMA_CTLB_ADR0 0x0000008C +#define V3_DMA_CTLB_ADR1 0x0000009C +#define V3_DMA_DELAY 0x000000E0 +#define V3_MAIL_DATA 0x000000C0 +#define V3_PCI_MAIL_IEWR 0x000000D0 +#define V3_PCI_MAIL_IERD 0x000000D2 +#define V3_LB_MAIL_IEWR 0x000000D4 +#define V3_LB_MAIL_IERD 0x000000D6 +#define V3_MAIL_WR_STAT 0x000000D8 +#define V3_MAIL_RD_STAT 0x000000DA +#define V3_QBA_MAP 0x000000DC + +/* PCI COMMAND REGISTER bits + */ +#define V3_COMMAND_M_FBB_EN (1 << 9) +#define V3_COMMAND_M_SERR_EN (1 << 8) +#define V3_COMMAND_M_PAR_EN (1 << 6) +#define V3_COMMAND_M_MASTER_EN (1 << 2) +#define V3_COMMAND_M_MEM_EN (1 << 1) +#define V3_COMMAND_M_IO_EN (1 << 0) + +/* SYSTEM REGISTER bits + */ +#define V3_SYSTEM_M_RST_OUT (1 << 15) +#define V3_SYSTEM_M_LOCK (1 << 14) + +/* PCI_CFG bits + */ +#define V3_PCI_CFG_M_I2O_EN (1 << 15) +#define V3_PCI_CFG_M_IO_REG_DIS (1 << 14) +#define V3_PCI_CFG_M_IO_DIS (1 << 13) +#define V3_PCI_CFG_M_EN3V (1 << 12) +#define V3_PCI_CFG_M_RETRY_EN (1 << 10) +#define V3_PCI_CFG_M_AD_LOW1 (1 << 9) +#define V3_PCI_CFG_M_AD_LOW0 (1 << 8) + +/* PCI_BASE register bits (PCI -> Local Bus) + */ +#define V3_PCI_BASE_M_ADR_BASE 0xFFF00000 +#define V3_PCI_BASE_M_ADR_BASEL 0x000FFF00 +#define V3_PCI_BASE_M_PREFETCH (1 << 3) +#define V3_PCI_BASE_M_TYPE (3 << 1) +#define V3_PCI_BASE_M_IO (1 << 0) + +/* PCI MAP register bits (PCI -> Local bus) + */ +#define V3_PCI_MAP_M_MAP_ADR 0xFFF00000 +#define V3_PCI_MAP_M_RD_POST_INH (1 << 15) +#define V3_PCI_MAP_M_ROM_SIZE (3 << 10) +#define V3_PCI_MAP_M_SWAP (3 << 8) +#define V3_PCI_MAP_M_ADR_SIZE 0x000000F0 +#define V3_PCI_MAP_M_REG_EN (1 << 1) +#define V3_PCI_MAP_M_ENABLE (1 << 0) + +/* + * LB_BASE0,1 register bits (Local bus -> PCI) + */ +#define V3_LB_BASE_ADR_BASE 0xfff00000 +#define V3_LB_BASE_SWAP (3 << 8) +#define V3_LB_BASE_ADR_SIZE (15 << 4) +#define V3_LB_BASE_PREFETCH (1 << 3) +#define V3_LB_BASE_ENABLE (1 << 0) + +#define V3_LB_BASE_ADR_SIZE_1MB (0 << 4) +#define V3_LB_BASE_ADR_SIZE_2MB (1 << 4) +#define V3_LB_BASE_ADR_SIZE_4MB (2 << 4) +#define V3_LB_BASE_ADR_SIZE_8MB (3 << 4) +#define V3_LB_BASE_ADR_SIZE_16MB (4 << 4) +#define V3_LB_BASE_ADR_SIZE_32MB (5 << 4) +#define V3_LB_BASE_ADR_SIZE_64MB (6 << 4) +#define V3_LB_BASE_ADR_SIZE_128MB (7 << 4) +#define V3_LB_BASE_ADR_SIZE_256MB (8 << 4) +#define V3_LB_BASE_ADR_SIZE_512MB (9 << 4) +#define V3_LB_BASE_ADR_SIZE_1GB (10 << 4) +#define V3_LB_BASE_ADR_SIZE_2GB (11 << 4) + +#define v3_addr_to_lb_base(a) ((a) & V3_LB_BASE_ADR_BASE) + +/* + * LB_MAP0,1 register bits (Local bus -> PCI) + */ +#define V3_LB_MAP_MAP_ADR 0xfff0 +#define V3_LB_MAP_TYPE (7 << 1) +#define V3_LB_MAP_AD_LOW_EN (1 << 0) + +#define V3_LB_MAP_TYPE_IACK (0 << 1) +#define V3_LB_MAP_TYPE_IO (1 << 1) +#define V3_LB_MAP_TYPE_MEM (3 << 1) +#define V3_LB_MAP_TYPE_CONFIG (5 << 1) +#define V3_LB_MAP_TYPE_MEM_MULTIPLE (6 << 1) + +#define v3_addr_to_lb_map(a) (((a) >> 16) & V3_LB_MAP_MAP_ADR) + +/* + * LB_BASE2 register bits (Local bus -> PCI IO) + */ +#define V3_LB_BASE2_ADR_BASE 0xff00 +#define V3_LB_BASE2_SWAP (3 << 6) +#define V3_LB_BASE2_ENABLE (1 << 0) + +#define v3_addr_to_lb_base2(a) (((a) >> 16) & V3_LB_BASE2_ADR_BASE) + +/* + * LB_MAP2 register bits (Local bus -> PCI IO) + */ +#define V3_LB_MAP2_MAP_ADR 0xff00 + +#define v3_addr_to_lb_map2(a) (((a) >> 16) & V3_LB_MAP2_MAP_ADR) + +#endif diff --git a/include/asm-arm/hardware/sa1111.h b/include/asm-arm/hardware/sa1111.h new file mode 100644 index 000000000000..319aea064c36 --- /dev/null +++ b/include/asm-arm/hardware/sa1111.h @@ -0,0 +1,602 @@ +/* + * linux/include/asm-arm/hardware/SA-1111.h + * + * Copyright (C) 2000 John G Dorsey <john+@cs.cmu.edu> + * + * This file contains definitions for the SA-1111 Companion Chip. + * (Structure and naming borrowed from SA-1101.h, by Peter Danielsson.) + * + * Macro that calculates real address for registers in the SA-1111 + */ + +#ifndef _ASM_ARCH_SA1111 +#define _ASM_ARCH_SA1111 + +#include <asm/arch/bitfield.h> + +/* + * The SA1111 is always located at virtual 0xf4000000, and is always + * "native" endian. + */ + +#define SA1111_VBASE 0xf4000000 + +/* Don't use these! */ +#define SA1111_p2v( x ) ((x) - SA1111_BASE + SA1111_VBASE) +#define SA1111_v2p( x ) ((x) - SA1111_VBASE + SA1111_BASE) + +#ifndef __ASSEMBLY__ +#define _SA1111(x) ((x) + sa1111->resource.start) +#endif + +/* + * 26 bits of the SA-1110 address bus are available to the SA-1111. + * Use these when feeding target addresses to the DMA engines. + */ + +#define SA1111_ADDR_WIDTH (26) +#define SA1111_ADDR_MASK ((1<<SA1111_ADDR_WIDTH)-1) +#define SA1111_DMA_ADDR(x) ((x)&SA1111_ADDR_MASK) + +/* + * Don't ask the (SAC) DMA engines to move less than this amount. + */ + +#define SA1111_SAC_DMA_MIN_XFER (0x800) + +/* + * SA1111 register definitions. + */ +#define __CCREG(x) __REGP(SA1111_VBASE + (x)) + +#define sa1111_writel(val,addr) __raw_writel(val, addr) +#define sa1111_readl(addr) __raw_readl(addr) + +/* + * System Bus Interface (SBI) + * + * Registers + * SKCR Control Register + * SMCR Shared Memory Controller Register + * SKID ID Register + */ +#define SA1111_SKCR 0x0000 +#define SA1111_SMCR 0x0004 +#define SA1111_SKID 0x0008 + +#define SKCR_PLL_BYPASS (1<<0) +#define SKCR_RCLKEN (1<<1) +#define SKCR_SLEEP (1<<2) +#define SKCR_DOZE (1<<3) +#define SKCR_VCO_OFF (1<<4) +#define SKCR_SCANTSTEN (1<<5) +#define SKCR_CLKTSTEN (1<<6) +#define SKCR_RDYEN (1<<7) +#define SKCR_SELAC (1<<8) +#define SKCR_OPPC (1<<9) +#define SKCR_PLLTSTEN (1<<10) +#define SKCR_USBIOTSTEN (1<<11) +/* + * Don't believe the specs! Take them, throw them outside. Leave them + * there for a week. Spit on them. Walk on them. Stamp on them. + * Pour gasoline over them and finally burn them. Now think about coding. + * - The October 1999 errata (278260-007) says its bit 13, 1 to enable. + * - The Feb 2001 errata (278260-010) says that the previous errata + * (278260-009) is wrong, and its bit actually 12, fixed in spec + * 278242-003. + * - The SA1111 manual (278242) says bit 12, but 0 to enable. + * - Reality is bit 13, 1 to enable. + * -- rmk + */ +#define SKCR_OE_EN (1<<13) + +#define SMCR_DTIM (1<<0) +#define SMCR_MBGE (1<<1) +#define SMCR_DRAC_0 (1<<2) +#define SMCR_DRAC_1 (1<<3) +#define SMCR_DRAC_2 (1<<4) +#define SMCR_DRAC Fld(3, 2) +#define SMCR_CLAT (1<<5) + +#define SKID_SIREV_MASK (0x000000f0) +#define SKID_MTREV_MASK (0x0000000f) +#define SKID_ID_MASK (0xffffff00) +#define SKID_SA1111_ID (0x690cc200) + +/* + * System Controller + * + * Registers + * SKPCR Power Control Register + * SKCDR Clock Divider Register + * SKAUD Audio Clock Divider Register + * SKPMC PS/2 Mouse Clock Divider Register + * SKPTC PS/2 Track Pad Clock Divider Register + * SKPEN0 PWM0 Enable Register + * SKPWM0 PWM0 Clock Register + * SKPEN1 PWM1 Enable Register + * SKPWM1 PWM1 Clock Register + */ +#define SA1111_SKPCR 0x0200 +#define SA1111_SKCDR 0x0204 +#define SA1111_SKAUD 0x0208 +#define SA1111_SKPMC 0x020c +#define SA1111_SKPTC 0x0210 +#define SA1111_SKPEN0 0x0214 +#define SA1111_SKPWM0 0x0218 +#define SA1111_SKPEN1 0x021c +#define SA1111_SKPWM1 0x0220 + +#define SKPCR_UCLKEN (1<<0) +#define SKPCR_ACCLKEN (1<<1) +#define SKPCR_I2SCLKEN (1<<2) +#define SKPCR_L3CLKEN (1<<3) +#define SKPCR_SCLKEN (1<<4) +#define SKPCR_PMCLKEN (1<<5) +#define SKPCR_PTCLKEN (1<<6) +#define SKPCR_DCLKEN (1<<7) +#define SKPCR_PWMCLKEN (1<<8) + +/* + * USB Host controller + */ +#define SA1111_USB 0x0400 + +/* + * Offsets from SA1111_USB_BASE + */ +#define SA1111_USB_STATUS 0x0118 +#define SA1111_USB_RESET 0x011c +#define SA1111_USB_IRQTEST 0x0120 + +#define USB_RESET_FORCEIFRESET (1 << 0) +#define USB_RESET_FORCEHCRESET (1 << 1) +#define USB_RESET_CLKGENRESET (1 << 2) +#define USB_RESET_SIMSCALEDOWN (1 << 3) +#define USB_RESET_USBINTTEST (1 << 4) +#define USB_RESET_SLEEPSTBYEN (1 << 5) +#define USB_RESET_PWRSENSELOW (1 << 6) +#define USB_RESET_PWRCTRLLOW (1 << 7) + +#define USB_STATUS_IRQHCIRMTWKUP (1 << 7) +#define USB_STATUS_IRQHCIBUFFACC (1 << 8) +#define USB_STATUS_NIRQHCIM (1 << 9) +#define USB_STATUS_NHCIMFCLR (1 << 10) +#define USB_STATUS_USBPWRSENSE (1 << 11) + +/* + * Serial Audio Controller + * + * Registers + * SACR0 Serial Audio Common Control Register + * SACR1 Serial Audio Alternate Mode (I2C/MSB) Control Register + * SACR2 Serial Audio AC-link Control Register + * SASR0 Serial Audio I2S/MSB Interface & FIFO Status Register + * SASR1 Serial Audio AC-link Interface & FIFO Status Register + * SASCR Serial Audio Status Clear Register + * L3_CAR L3 Control Bus Address Register + * L3_CDR L3 Control Bus Data Register + * ACCAR AC-link Command Address Register + * ACCDR AC-link Command Data Register + * ACSAR AC-link Status Address Register + * ACSDR AC-link Status Data Register + * SADTCS Serial Audio DMA Transmit Control/Status Register + * SADTSA Serial Audio DMA Transmit Buffer Start Address A + * SADTCA Serial Audio DMA Transmit Buffer Count Register A + * SADTSB Serial Audio DMA Transmit Buffer Start Address B + * SADTCB Serial Audio DMA Transmit Buffer Count Register B + * SADRCS Serial Audio DMA Receive Control/Status Register + * SADRSA Serial Audio DMA Receive Buffer Start Address A + * SADRCA Serial Audio DMA Receive Buffer Count Register A + * SADRSB Serial Audio DMA Receive Buffer Start Address B + * SADRCB Serial Audio DMA Receive Buffer Count Register B + * SAITR Serial Audio Interrupt Test Register + * SADR Serial Audio Data Register (16 x 32-bit) + */ + +#define _SACR0 _SA1111( 0x0600 ) +#define _SACR1 _SA1111( 0x0604 ) +#define _SACR2 _SA1111( 0x0608 ) +#define _SASR0 _SA1111( 0x060c ) +#define _SASR1 _SA1111( 0x0610 ) +#define _SASCR _SA1111( 0x0618 ) +#define _L3_CAR _SA1111( 0x061c ) +#define _L3_CDR _SA1111( 0x0620 ) +#define _ACCAR _SA1111( 0x0624 ) +#define _ACCDR _SA1111( 0x0628 ) +#define _ACSAR _SA1111( 0x062c ) +#define _ACSDR _SA1111( 0x0630 ) +#define _SADTCS _SA1111( 0x0634 ) +#define _SADTSA _SA1111( 0x0638 ) +#define _SADTCA _SA1111( 0x063c ) +#define _SADTSB _SA1111( 0x0640 ) +#define _SADTCB _SA1111( 0x0644 ) +#define _SADRCS _SA1111( 0x0648 ) +#define _SADRSA _SA1111( 0x064c ) +#define _SADRCA _SA1111( 0x0650 ) +#define _SADRSB _SA1111( 0x0654 ) +#define _SADRCB _SA1111( 0x0658 ) +#define _SAITR _SA1111( 0x065c ) +#define _SADR _SA1111( 0x0680 ) + +#define SACR0 __CCREG(0x0600) +#define SACR1 __CCREG(0x0604) +#define SACR2 __CCREG(0x0608) +#define SASR0 __CCREG(0x060c) +#define SASR1 __CCREG(0x0610) +#define SASCR __CCREG(0x0618) +#define L3_CAR __CCREG(0x061c) +#define L3_CDR __CCREG(0x0620) +#define ACCAR __CCREG(0x0624) +#define ACCDR __CCREG(0x0628) +#define ACSAR __CCREG(0x062c) +#define ACSDR __CCREG(0x0630) +#define SADTCS __CCREG(0x0634) +#define SADTSA __CCREG(0x0638) +#define SADTCA __CCREG(0x063c) +#define SADTSB __CCREG(0x0640) +#define SADTCB __CCREG(0x0644) +#define SADRCS __CCREG(0x0648) +#define SADRSA __CCREG(0x064c) +#define SADRCA __CCREG(0x0650) +#define SADRSB __CCREG(0x0654) +#define SADRCB __CCREG(0x0658) +#define SAITR __CCREG(0x065c) +#define SADR __CCREG(0x0680) + +#define SACR0_ENB (1<<0) +#define SACR0_BCKD (1<<2) +#define SACR0_RST (1<<3) + +#define SACR1_AMSL (1<<0) +#define SACR1_L3EN (1<<1) +#define SACR1_L3MB (1<<2) +#define SACR1_DREC (1<<3) +#define SACR1_DRPL (1<<4) +#define SACR1_ENLBF (1<<5) + +#define SACR2_TS3V (1<<0) +#define SACR2_TS4V (1<<1) +#define SACR2_WKUP (1<<2) +#define SACR2_DREC (1<<3) +#define SACR2_DRPL (1<<4) +#define SACR2_ENLBF (1<<5) +#define SACR2_RESET (1<<6) + +#define SASR0_TNF (1<<0) +#define SASR0_RNE (1<<1) +#define SASR0_BSY (1<<2) +#define SASR0_TFS (1<<3) +#define SASR0_RFS (1<<4) +#define SASR0_TUR (1<<5) +#define SASR0_ROR (1<<6) +#define SASR0_L3WD (1<<16) +#define SASR0_L3RD (1<<17) + +#define SASR1_TNF (1<<0) +#define SASR1_RNE (1<<1) +#define SASR1_BSY (1<<2) +#define SASR1_TFS (1<<3) +#define SASR1_RFS (1<<4) +#define SASR1_TUR (1<<5) +#define SASR1_ROR (1<<6) +#define SASR1_CADT (1<<16) +#define SASR1_SADR (1<<17) +#define SASR1_RSTO (1<<18) +#define SASR1_CLPM (1<<19) +#define SASR1_CRDY (1<<20) +#define SASR1_RS3V (1<<21) +#define SASR1_RS4V (1<<22) + +#define SASCR_TUR (1<<5) +#define SASCR_ROR (1<<6) +#define SASCR_DTS (1<<16) +#define SASCR_RDD (1<<17) +#define SASCR_STO (1<<18) + +#define SADTCS_TDEN (1<<0) +#define SADTCS_TDIE (1<<1) +#define SADTCS_TDBDA (1<<3) +#define SADTCS_TDSTA (1<<4) +#define SADTCS_TDBDB (1<<5) +#define SADTCS_TDSTB (1<<6) +#define SADTCS_TBIU (1<<7) + +#define SADRCS_RDEN (1<<0) +#define SADRCS_RDIE (1<<1) +#define SADRCS_RDBDA (1<<3) +#define SADRCS_RDSTA (1<<4) +#define SADRCS_RDBDB (1<<5) +#define SADRCS_RDSTB (1<<6) +#define SADRCS_RBIU (1<<7) + +#define SAD_CS_DEN (1<<0) +#define SAD_CS_DIE (1<<1) /* Not functional on metal 1 */ +#define SAD_CS_DBDA (1<<3) /* Not functional on metal 1 */ +#define SAD_CS_DSTA (1<<4) +#define SAD_CS_DBDB (1<<5) /* Not functional on metal 1 */ +#define SAD_CS_DSTB (1<<6) +#define SAD_CS_BIU (1<<7) /* Not functional on metal 1 */ + +#define SAITR_TFS (1<<0) +#define SAITR_RFS (1<<1) +#define SAITR_TUR (1<<2) +#define SAITR_ROR (1<<3) +#define SAITR_CADT (1<<4) +#define SAITR_SADR (1<<5) +#define SAITR_RSTO (1<<6) +#define SAITR_TDBDA (1<<8) +#define SAITR_TDBDB (1<<9) +#define SAITR_RDBDA (1<<10) +#define SAITR_RDBDB (1<<11) + +/* + * General-Purpose I/O Interface + * + * Registers + * PA_DDR GPIO Block A Data Direction + * PA_DRR/PA_DWR GPIO Block A Data Value Register (read/write) + * PA_SDR GPIO Block A Sleep Direction + * PA_SSR GPIO Block A Sleep State + * PB_DDR GPIO Block B Data Direction + * PB_DRR/PB_DWR GPIO Block B Data Value Register (read/write) + * PB_SDR GPIO Block B Sleep Direction + * PB_SSR GPIO Block B Sleep State + * PC_DDR GPIO Block C Data Direction + * PC_DRR/PC_DWR GPIO Block C Data Value Register (read/write) + * PC_SDR GPIO Block C Sleep Direction + * PC_SSR GPIO Block C Sleep State + */ + +#define _PA_DDR _SA1111( 0x1000 ) +#define _PA_DRR _SA1111( 0x1004 ) +#define _PA_DWR _SA1111( 0x1004 ) +#define _PA_SDR _SA1111( 0x1008 ) +#define _PA_SSR _SA1111( 0x100c ) +#define _PB_DDR _SA1111( 0x1010 ) +#define _PB_DRR _SA1111( 0x1014 ) +#define _PB_DWR _SA1111( 0x1014 ) +#define _PB_SDR _SA1111( 0x1018 ) +#define _PB_SSR _SA1111( 0x101c ) +#define _PC_DDR _SA1111( 0x1020 ) +#define _PC_DRR _SA1111( 0x1024 ) +#define _PC_DWR _SA1111( 0x1024 ) +#define _PC_SDR _SA1111( 0x1028 ) +#define _PC_SSR _SA1111( 0x102c ) + +#define SA1111_GPIO 0x1000 + +#define SA1111_GPIO_PADDR (0x000) +#define SA1111_GPIO_PADRR (0x004) +#define SA1111_GPIO_PADWR (0x004) +#define SA1111_GPIO_PASDR (0x008) +#define SA1111_GPIO_PASSR (0x00c) +#define SA1111_GPIO_PBDDR (0x010) +#define SA1111_GPIO_PBDRR (0x014) +#define SA1111_GPIO_PBDWR (0x014) +#define SA1111_GPIO_PBSDR (0x018) +#define SA1111_GPIO_PBSSR (0x01c) +#define SA1111_GPIO_PCDDR (0x020) +#define SA1111_GPIO_PCDRR (0x024) +#define SA1111_GPIO_PCDWR (0x024) +#define SA1111_GPIO_PCSDR (0x028) +#define SA1111_GPIO_PCSSR (0x02c) + +#define GPIO_A0 (1 << 0) +#define GPIO_A1 (1 << 1) +#define GPIO_A2 (1 << 2) +#define GPIO_A3 (1 << 3) + +#define GPIO_B0 (1 << 8) +#define GPIO_B1 (1 << 9) +#define GPIO_B2 (1 << 10) +#define GPIO_B3 (1 << 11) +#define GPIO_B4 (1 << 12) +#define GPIO_B5 (1 << 13) +#define GPIO_B6 (1 << 14) +#define GPIO_B7 (1 << 15) + +#define GPIO_C0 (1 << 16) +#define GPIO_C1 (1 << 17) +#define GPIO_C2 (1 << 18) +#define GPIO_C3 (1 << 19) +#define GPIO_C4 (1 << 20) +#define GPIO_C5 (1 << 21) +#define GPIO_C6 (1 << 22) +#define GPIO_C7 (1 << 23) + +/* + * Interrupt Controller + * + * Registers + * INTTEST0 Test register 0 + * INTTEST1 Test register 1 + * INTEN0 Interrupt Enable register 0 + * INTEN1 Interrupt Enable register 1 + * INTPOL0 Interrupt Polarity selection 0 + * INTPOL1 Interrupt Polarity selection 1 + * INTTSTSEL Interrupt source selection + * INTSTATCLR0 Interrupt Status/Clear 0 + * INTSTATCLR1 Interrupt Status/Clear 1 + * INTSET0 Interrupt source set 0 + * INTSET1 Interrupt source set 1 + * WAKE_EN0 Wake-up source enable 0 + * WAKE_EN1 Wake-up source enable 1 + * WAKE_POL0 Wake-up polarity selection 0 + * WAKE_POL1 Wake-up polarity selection 1 + */ +#define SA1111_INTC 0x1600 + +/* + * These are offsets from the above base. + */ +#define SA1111_INTTEST0 0x0000 +#define SA1111_INTTEST1 0x0004 +#define SA1111_INTEN0 0x0008 +#define SA1111_INTEN1 0x000c +#define SA1111_INTPOL0 0x0010 +#define SA1111_INTPOL1 0x0014 +#define SA1111_INTTSTSEL 0x0018 +#define SA1111_INTSTATCLR0 0x001c +#define SA1111_INTSTATCLR1 0x0020 +#define SA1111_INTSET0 0x0024 +#define SA1111_INTSET1 0x0028 +#define SA1111_WAKEEN0 0x002c +#define SA1111_WAKEEN1 0x0030 +#define SA1111_WAKEPOL0 0x0034 +#define SA1111_WAKEPOL1 0x0038 + +/* + * PS/2 Trackpad and Mouse Interfaces + * + * Registers + * PS2CR Control Register + * PS2STAT Status Register + * PS2DATA Transmit/Receive Data register + * PS2CLKDIV Clock Division Register + * PS2PRECNT Clock Precount Register + * PS2TEST1 Test register 1 + * PS2TEST2 Test register 2 + * PS2TEST3 Test register 3 + * PS2TEST4 Test register 4 + */ + +#define SA1111_KBD 0x0a00 +#define SA1111_MSE 0x0c00 + +/* + * These are offsets from the above bases. + */ +#define SA1111_PS2CR 0x0000 +#define SA1111_PS2STAT 0x0004 +#define SA1111_PS2DATA 0x0008 +#define SA1111_PS2CLKDIV 0x000c +#define SA1111_PS2PRECNT 0x0010 + +#define PS2CR_ENA 0x08 +#define PS2CR_FKD 0x02 +#define PS2CR_FKC 0x01 + +#define PS2STAT_STP 0x0100 +#define PS2STAT_TXE 0x0080 +#define PS2STAT_TXB 0x0040 +#define PS2STAT_RXF 0x0020 +#define PS2STAT_RXB 0x0010 +#define PS2STAT_ENA 0x0008 +#define PS2STAT_RXP 0x0004 +#define PS2STAT_KBD 0x0002 +#define PS2STAT_KBC 0x0001 + +/* + * PCMCIA Interface + * + * Registers + * PCSR Status Register + * PCCR Control Register + * PCSSR Sleep State Register + */ + +#define SA1111_PCMCIA 0x1600 + +/* + * These are offsets from the above base. + */ +#define SA1111_PCCR 0x0000 +#define SA1111_PCSSR 0x0004 +#define SA1111_PCSR 0x0008 + +#define PCSR_S0_READY (1<<0) +#define PCSR_S1_READY (1<<1) +#define PCSR_S0_DETECT (1<<2) +#define PCSR_S1_DETECT (1<<3) +#define PCSR_S0_VS1 (1<<4) +#define PCSR_S0_VS2 (1<<5) +#define PCSR_S1_VS1 (1<<6) +#define PCSR_S1_VS2 (1<<7) +#define PCSR_S0_WP (1<<8) +#define PCSR_S1_WP (1<<9) +#define PCSR_S0_BVD1 (1<<10) +#define PCSR_S0_BVD2 (1<<11) +#define PCSR_S1_BVD1 (1<<12) +#define PCSR_S1_BVD2 (1<<13) + +#define PCCR_S0_RST (1<<0) +#define PCCR_S1_RST (1<<1) +#define PCCR_S0_FLT (1<<2) +#define PCCR_S1_FLT (1<<3) +#define PCCR_S0_PWAITEN (1<<4) +#define PCCR_S1_PWAITEN (1<<5) +#define PCCR_S0_PSE (1<<6) +#define PCCR_S1_PSE (1<<7) + +#define PCSSR_S0_SLEEP (1<<0) +#define PCSSR_S1_SLEEP (1<<1) + + + + +extern struct bus_type sa1111_bus_type; + +#define SA1111_DEVID_SBI 0 +#define SA1111_DEVID_SK 1 +#define SA1111_DEVID_USB 2 +#define SA1111_DEVID_SAC 3 +#define SA1111_DEVID_SSP 4 +#define SA1111_DEVID_PS2 5 +#define SA1111_DEVID_GPIO 6 +#define SA1111_DEVID_INT 7 +#define SA1111_DEVID_PCMCIA 8 + +struct sa1111_dev { + struct device dev; + unsigned int devid; + struct resource res; + void __iomem *mapbase; + unsigned int skpcr_mask; + unsigned int irq[6]; + u64 dma_mask; +}; + +#define SA1111_DEV(_d) container_of((_d), struct sa1111_dev, dev) + +#define sa1111_get_drvdata(d) dev_get_drvdata(&(d)->dev) +#define sa1111_set_drvdata(d,p) dev_set_drvdata(&(d)->dev, p) + +struct sa1111_driver { + struct device_driver drv; + unsigned int devid; + int (*probe)(struct sa1111_dev *); + int (*remove)(struct sa1111_dev *); + int (*suspend)(struct sa1111_dev *, pm_message_t); + int (*resume)(struct sa1111_dev *); +}; + +#define SA1111_DRV(_d) container_of((_d), struct sa1111_driver, drv) + +#define SA1111_DRIVER_NAME(_sadev) ((_sadev)->dev.driver->name) + +/* + * These frob the SKPCR register. + */ +void sa1111_enable_device(struct sa1111_dev *); +void sa1111_disable_device(struct sa1111_dev *); + +unsigned int sa1111_pll_clock(struct sa1111_dev *); + +#define SA1111_AUDIO_ACLINK 0 +#define SA1111_AUDIO_I2S 1 + +void sa1111_select_audio_mode(struct sa1111_dev *sadev, int mode); +int sa1111_set_audio_rate(struct sa1111_dev *sadev, int rate); +int sa1111_get_audio_rate(struct sa1111_dev *sadev); + +int sa1111_check_dma_bug(dma_addr_t addr); + +int sa1111_driver_register(struct sa1111_driver *); +void sa1111_driver_unregister(struct sa1111_driver *); + +void sa1111_set_io_dir(struct sa1111_dev *sadev, unsigned int bits, unsigned int dir, unsigned int sleep_dir); +void sa1111_set_io(struct sa1111_dev *sadev, unsigned int bits, unsigned int v); +void sa1111_set_sleep_io(struct sa1111_dev *sadev, unsigned int bits, unsigned int v); + +#endif /* _ASM_ARCH_SA1111 */ diff --git a/include/asm-arm/hardware/scoop.h b/include/asm-arm/hardware/scoop.h new file mode 100644 index 000000000000..7ea771ff6144 --- /dev/null +++ b/include/asm-arm/hardware/scoop.h @@ -0,0 +1,47 @@ +/* + * Definitions for the SCOOP interface found on various Sharp PDAs + * + * Copyright (c) 2004 Richard Purdie + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#define SCOOP_MCR 0x00 +#define SCOOP_CDR 0x04 +#define SCOOP_CSR 0x08 +#define SCOOP_CPR 0x0C +#define SCOOP_CCR 0x10 +#define SCOOP_IRR 0x14 +#define SCOOP_IRM 0x14 +#define SCOOP_IMR 0x18 +#define SCOOP_ISR 0x1C +#define SCOOP_GPCR 0x20 +#define SCOOP_GPWR 0x24 +#define SCOOP_GPRR 0x28 + +#define SCOOP_GPCR_PA22 ( 1 << 12 ) +#define SCOOP_GPCR_PA21 ( 1 << 11 ) +#define SCOOP_GPCR_PA20 ( 1 << 10 ) +#define SCOOP_GPCR_PA19 ( 1 << 9 ) +#define SCOOP_GPCR_PA18 ( 1 << 8 ) +#define SCOOP_GPCR_PA17 ( 1 << 7 ) +#define SCOOP_GPCR_PA16 ( 1 << 6 ) +#define SCOOP_GPCR_PA15 ( 1 << 5 ) +#define SCOOP_GPCR_PA14 ( 1 << 4 ) +#define SCOOP_GPCR_PA13 ( 1 << 3 ) +#define SCOOP_GPCR_PA12 ( 1 << 2 ) +#define SCOOP_GPCR_PA11 ( 1 << 1 ) + +struct scoop_config { + unsigned short io_out; + unsigned short io_dir; +}; + +void reset_scoop(struct device *dev); +unsigned short set_scoop_gpio(struct device *dev, unsigned short bit); +unsigned short reset_scoop_gpio(struct device *dev, unsigned short bit); +unsigned short read_scoop_reg(struct device *dev, unsigned short reg); +void write_scoop_reg(struct device *dev, unsigned short reg, unsigned short data); diff --git a/include/asm-arm/hardware/ssp.h b/include/asm-arm/hardware/ssp.h new file mode 100644 index 000000000000..28aa11b769cd --- /dev/null +++ b/include/asm-arm/hardware/ssp.h @@ -0,0 +1,28 @@ +/* + * ssp.h + * + * Copyright (C) 2003 Russell King, All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef SSP_H +#define SSP_H + +struct ssp_state { + unsigned int cr0; + unsigned int cr1; +}; + +int ssp_write_word(u16 data); +int ssp_read_word(void); +void ssp_flush(void); +void ssp_enable(void); +void ssp_disable(void); +void ssp_save_state(struct ssp_state *ssp); +void ssp_restore_state(struct ssp_state *ssp); +int ssp_init(void); +void ssp_exit(void); + +#endif |