1 files changed, 0 insertions, 109 deletions
diff --git a/include/asm-arm26/hardware.h b/include/asm-arm26/hardware.h
deleted file mode 100644
index 801df0bde8b7..000000000000
--- a/include/asm-arm26/hardware.h
+++ /dev/null
@@ -1,109 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-arc/hardware.h
- *
- *  Copyright (C) 1996-1999 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  This file contains the hardware definitions of the
- *  Acorn Archimedes/A5000 machines.
- *
- *  Modifications:
- *   04-04-1998	PJB/RMK	Merged arc and a5k versions
- */
-#ifndef __ASM_HARDWARE_H
-#define __ASM_HARDWARE_H
-
-
-
-/*
- * What hardware must be present - these can be tested by the kernel
- * source.
- */
-#define HAS_IOC
-#define HAS_MEMC
-#define HAS_VIDC
-
-#define VDMA_ALIGNMENT  PAGE_SIZE
-#define VDMA_XFERSIZE   16
-#define VDMA_INIT       0
-#define VDMA_START      1
-#define VDMA_END        2
-
-#ifndef __ASSEMBLY__
-extern void memc_write(unsigned int reg, unsigned long val);
-
-#define video_set_dma(start,end,offset)                         \
-do {                                                            \
-        memc_write (VDMA_START, (start >> 2));                  \
-        memc_write (VDMA_END, (end - VDMA_XFERSIZE) >> 2);      \
-        memc_write (VDMA_INIT, (offset >> 2));                  \
-} while (0)
-#endif
-
-
-/* Hardware addresses of major areas.
- *  *_START is the physical address
- *  *_SIZE  is the size of the region
- *  *_BASE  is the virtual address
- */
-#define IO_START		0x03000000
-#define IO_SIZE			0x01000000
-#define IO_BASE			0x03000000
-
-/*
- * Screen mapping information
- */
-#define SCREEN_START		0x02000000
-#define SCREEN_END		0x02078000
-#define SCREEN_SIZE		0x00078000
-#define SCREEN_BASE		0x02000000
-
-
-#define EXPMASK_BASE		0x03360000
-#define IOEB_BASE		0x03350000
-#define VIDC_BASE		0x03400000
-#define LATCHA_BASE		0x03250040
-#define LATCHB_BASE		0x03250018
-#define IOC_BASE		0x03200000
-#define FLOPPYDMA_BASE		0x0302a000
-#define PCIO_BASE		0x03010000
-
-// FIXME - are the below correct?
-#define PODSLOT_IOC0_BASE       0x03240000
-#define PODSLOT_IOC_SIZE        (1 << 14)
-#define PODSLOT_MEMC_BASE       0x03000000
-#define PODSLOT_MEMC_SIZE       (1 << 14)
-
-#define vidc_writel(val)	__raw_writel(val, VIDC_BASE)
-
-#ifndef __ASSEMBLY__
-
-/*
- * for use with inb/outb
- */
-#define IOEB_VID_CTL		(IOEB_BASE + 0x48)
-#define IOEB_PRESENT		(IOEB_BASE + 0x50)
-#define IOEB_PSCLR		(IOEB_BASE + 0x58)
-#define IOEB_MONTYPE		(IOEB_BASE + 0x70)
-
-//FIXME - These adresses are weird - ISTR some weirdo address shifting stuff was going on here...
-#define IO_EC_IOC_BASE		0x80090000
-#define IO_EC_MEMC_BASE		0x80000000
-
-#ifdef CONFIG_ARCH_ARC
-/* A680 hardware */
-#define WD1973_BASE		0x03290000
-#define WD1973_LATCH		0x03350000
-#define Z8530_BASE		0x032b0008
-#define SCSI_BASE		0x03100000
-#endif
-
-#endif
-
-#define	EXPMASK_STATUS		(EXPMASK_BASE + 0x00)
-#define EXPMASK_ENABLE		(EXPMASK_BASE + 0x04)
-
-#endif