diff options
Diffstat (limited to 'include/asm-arm')
| -rw-r--r-- | include/asm-arm/arch-omap/common.h | 4 | ||||
| -rw-r--r-- | include/asm-arm/arch-omap/control.h | 2 | ||||
| -rw-r--r-- | include/asm-arm/arch-omap/mmc.h | 24 | ||||
| -rw-r--r-- | include/asm-arm/arch-sa1100/irqs.h | 2 | ||||
| -rw-r--r-- | include/asm-arm/hardware/locomo.h | 19 |
5 files changed, 32 insertions, 19 deletions
diff --git a/include/asm-arm/arch-omap/common.h b/include/asm-arm/arch-omap/common.h index 224e009e5296..36a3b62d4d8d 100644 --- a/include/asm-arm/arch-omap/common.h +++ b/include/asm-arm/arch-omap/common.h @@ -47,4 +47,8 @@ static inline int omap_register_i2c_bus(int bus_id, u32 clkrate, } #endif +void omap2_set_globals_242x(void); +void omap2_set_globals_243x(void); +void omap2_set_globals_343x(void); + #endif /* __ARCH_ARM_MACH_OMAP_COMMON_H */ diff --git a/include/asm-arm/arch-omap/control.h b/include/asm-arm/arch-omap/control.h index 9944bb5d5330..59c0686f8be7 100644 --- a/include/asm-arm/arch-omap/control.h +++ b/include/asm-arm/arch-omap/control.h @@ -80,7 +80,7 @@ #define OMAP24XX_CONTROL_SEC_TAP (OMAP2_CONTROL_GENERAL + 0x0064) #define OMAP24XX_CONTROL_OCM_PUB_RAM_ADD (OMAP2_CONTROL_GENERAL + 0x006c) #define OMAP24XX_CONTROL_EXT_SEC_RAM_START_ADD (OMAP2_CONTROL_GENERAL + 0x0070) -#define OMAP24XX_CONTROL_EXT_SEC_RAM_STOP_ADD (OMAP2_CONTROL_GENERAL + 0x0074 +#define OMAP24XX_CONTROL_EXT_SEC_RAM_STOP_ADD (OMAP2_CONTROL_GENERAL + 0x0074) #define OMAP24XX_CONTROL_SEC_STATUS (OMAP2_CONTROL_GENERAL + 0x0080) #define OMAP24XX_CONTROL_SEC_ERR_STATUS (OMAP2_CONTROL_GENERAL + 0x0084) #define OMAP24XX_CONTROL_STATUS (OMAP2_CONTROL_GENERAL + 0x0088) diff --git a/include/asm-arm/arch-omap/mmc.h b/include/asm-arm/arch-omap/mmc.h index c9588f49eb52..7cfc5f258560 100644 --- a/include/asm-arm/arch-omap/mmc.h +++ b/include/asm-arm/arch-omap/mmc.h @@ -15,21 +15,16 @@ #include <linux/device.h> #include <linux/mmc/host.h> +#include <asm/arch/board.h> + #define OMAP_MMC_MAX_SLOTS 2 struct omap_mmc_platform_data { struct omap_mmc_conf conf; - unsigned enabled:1; /* number of slots on board */ unsigned nr_slots:2; - /* nomux means "standard" muxing is wrong on this board, and that - * board-specific code handled it before common init logic. - */ - unsigned nomux:1; - /* 4 wire signaling is optional, and is only used for SD/SDIO and - * MMCv4 */ - unsigned wire4:1; + /* set if your board has components or wiring that limits the * maximum frequency on the MMC bus */ unsigned int max_freq; @@ -40,6 +35,11 @@ struct omap_mmc_platform_data { * not supported */ int (* init)(struct device *dev); void (* cleanup)(struct device *dev); + void (* shutdown)(struct device *dev); + + /* To handle board related suspend/resume functionality for MMC */ + int (*suspend)(struct device *dev, int slot); + int (*resume)(struct device *dev, int slot); struct omap_mmc_slot_data { int (* set_bus_mode)(struct device *dev, int slot, int bus_mode); @@ -56,13 +56,19 @@ struct omap_mmc_platform_data { const char *name; u32 ocr_mask; + + /* Card detection IRQs */ + int card_detect_irq; + int (* card_detect)(int irq); + + unsigned int ban_openended:1; + } slots[OMAP_MMC_MAX_SLOTS]; }; extern void omap_set_mmc_info(int host, const struct omap_mmc_platform_data *info); /* called from board-specific card detection service routine */ -extern void omap_mmc_notify_card_detect(struct device *dev, int slot, int detected); extern void omap_mmc_notify_cover_event(struct device *dev, int slot, int is_closed); #endif diff --git a/include/asm-arm/arch-sa1100/irqs.h b/include/asm-arm/arch-sa1100/irqs.h index d7940683efb1..7bf80484bb77 100644 --- a/include/asm-arm/arch-sa1100/irqs.h +++ b/include/asm-arm/arch-sa1100/irqs.h @@ -141,7 +141,7 @@ #define IRQ_LOCOMO_LT (IRQ_BOARD_END + 17) #define IRQ_LOCOMO_SPI_RFR (IRQ_BOARD_END + 18) #define IRQ_LOCOMO_SPI_RFW (IRQ_BOARD_END + 19) -#define IRQ_LOCOMO_SPI_OVRN (IRQ_BOARD_END + 20) +#define IRQ_LOCOMO_SPI_REND (IRQ_BOARD_END + 20) #define IRQ_LOCOMO_SPI_TEND (IRQ_BOARD_END + 21) /* diff --git a/include/asm-arm/hardware/locomo.h b/include/asm-arm/hardware/locomo.h index adab77780ed3..fb0645de6f31 100644 --- a/include/asm-arm/hardware/locomo.h +++ b/include/asm-arm/hardware/locomo.h @@ -58,6 +58,11 @@ #define LOCOMO_SPIMD 0x00 /* SPI mode setting */ #define LOCOMO_SPICT 0x04 /* SPI mode control */ #define LOCOMO_SPIST 0x08 /* SPI status */ +#define LOCOMO_SPI_TEND (1 << 3) /* Transfer end bit */ +#define LOCOMO_SPI_REND (1 << 2) /* Receive end bit */ +#define LOCOMO_SPI_RFW (1 << 1) /* write buffer bit */ +#define LOCOMO_SPI_RFR (1) /* read buffer bit */ + #define LOCOMO_SPIIS 0x10 /* SPI interrupt status */ #define LOCOMO_SPIWE 0x14 /* SPI interrupt status write enable */ #define LOCOMO_SPIIE 0x18 /* SPI interrupt enable */ @@ -66,16 +71,12 @@ #define LOCOMO_SPIRD 0x24 /* SPI receive data read */ #define LOCOMO_SPITS 0x28 /* SPI transfer data shift */ #define LOCOMO_SPIRS 0x2C /* SPI receive data shift */ -#define LOCOMO_SPI_TEND (1 << 3) /* Transfer end bit */ -#define LOCOMO_SPI_OVRN (1 << 2) /* Over Run bit */ -#define LOCOMO_SPI_RFW (1 << 1) /* write buffer bit */ -#define LOCOMO_SPI_RFR (1) /* read buffer bit */ /* GPIO */ #define LOCOMO_GPD 0x90 /* GPIO direction */ #define LOCOMO_GPE 0x94 /* GPIO input enable */ #define LOCOMO_GPL 0x98 /* GPIO level */ -#define LOCOMO_GPO 0x9c /* GPIO out data setteing */ +#define LOCOMO_GPO 0x9c /* GPIO out data setting */ #define LOCOMO_GRIE 0xa0 /* GPIO rise detection */ #define LOCOMO_GFIE 0xa4 /* GPIO fall detection */ #define LOCOMO_GIS 0xa8 /* GPIO edge detection status */ @@ -96,6 +97,9 @@ #define LOCOMO_GPIO_DAC_SDATA LOCOMO_GPIO(10) #define LOCOMO_GPIO_DAC_SCK LOCOMO_GPIO(11) #define LOCOMO_GPIO_DAC_SLOAD LOCOMO_GPIO(12) +#define LOCOMO_GPIO_CARD_DETECT LOCOMO_GPIO(13) +#define LOCOMO_GPIO_WRITE_PROT LOCOMO_GPIO(14) +#define LOCOMO_GPIO_CARD_POWER LOCOMO_GPIO(15) /* Start the definitions of the devices. Each device has an initial * base address and a series of offsets from that base address. */ @@ -122,7 +126,7 @@ /* Audio controller */ #define LOCOMO_AUDIO 0x54 #define LOCOMO_ACC 0x00 /* Audio clock */ -#define LOCOMO_PAIF 0x7C /* PCM audio interface */ +#define LOCOMO_PAIF 0xD0 /* PCM audio interface */ /* Audio clock */ #define LOCOMO_ACC_XON 0x80 #define LOCOMO_ACC_XEN 0x40 @@ -162,7 +166,7 @@ extern struct bus_type locomo_bus_type; #define LOCOMO_DEVID_AUDIO 3 #define LOCOMO_DEVID_LED 4 #define LOCOMO_DEVID_UART 5 -#define LOCOMO_DEVID_SPI 6 +#define LOCOMO_DEVID_SPI 6 struct locomo_dev { struct device dev; @@ -204,7 +208,6 @@ int locomo_gpio_read_level(struct device *dev, unsigned int bits); int locomo_gpio_read_output(struct device *dev, unsigned int bits); void locomo_gpio_write(struct device *dev, unsigned int bits, unsigned int set); - /* M62332 control function */ void locomo_m62332_senddata(struct locomo_dev *ldev, unsigned int dac_data, int channel); |